???global.info.a_carregar???
Hélder Baptista received a BSc degree in Biotechnology at the University of Aveiro in June 2019 with the final grade of 16. His final BSc project resulted in a presentation and published abstract in the 6th International Polysaccharide Conference: EPNOE. In November 2021, he enrolled in a MSc in Biomedical Materials and Devices also at the University of Aveiro, finishing with a final grade of 17. During this past couple of years, he was class representative and while studying, he received a 17-months research grant (CENTRO-01-0145-FEDER-031679) to develop self-assembled peptide-based piezoelectric materials. From this work, two articles are currently being prepared to be published in Science Citation Index journals. A poster was also presented and a subtract published in CICECO Jornadas 22. He is currently enrolled in a research grant for the CLEVER project (POCI-01-0247-FEDER-039699) at the Department of Materials and Ceramic Engineering (University of Aveiro), before starting his PhD in Materials Science and Engineering.
Identificação

Identificação pessoal

Nome completo
HÉLDER DUARTE DE MAGALHÃES OLIVEIRA BAPTISTA

Nomes de citação

  • BAPTISTA, HÉLDER

Identificadores de autor

Ciência ID
F917-876F-7BFA
ORCID iD
0000-0001-6386-2247

Endereços de correio eletrónico

  • hbaptista@ua.pt (Profissional)

Domínios de atuação

  • Ciências Exatas - Química - Ciência de Polímeros
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais
  • Ciências Agrárias - Biotecnologia Agrária e Alimentar
  • Ciências Médicas e da Saúde - Biotecnologia Médica - Biomateriais
  • Ciências Naturais - Ciências Biológicas - Bioquímica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2019 - 2021
Concluído
Materiais e Dispositivos Biomédicos (Mestrado integrado)
Universidade de Aveiro, Portugal
"Design and Development of Novel Biomaterials for Cardiac Tissue Engineering" (TESE/DISSERTAÇÃO)
17
2016 - 2019
Concluído
Biotecnologia (Licenciatura)
Universidade de Aveiro, Portugal
16
Projetos

Bolsa

Designação Financiadores
2022/05/01 - 2022/10/01 CLEVER - Desenvolvimento de garrafas de vidro branco e transparente capazes de preservar a qualidade da cerveja
POCI-01-0247-FEDER-039699
Bolseiro de Investigação
Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/06/01 - 2021/11/01 BioPiezo - Development of novel piezoelectric materials based on nanostructured self-assembled peptides
CENTRO-01-0145-FEDER-031679
Bolseiro de Investigação
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
Fundação para a Ciência e a Tecnologia
Produções

Publicações

Poster em conferência
  1. BAPTISTA, HÉLDER; FERREIRA, PAULA; NUNES, CLÁUDIA; MATTHIJS, DEKKER. "Screen printable bio-based ink for smart food packaging". Trabalho apresentado em Ciência 2023 - Encontro com a Ciência e a Tecnologia em Portugal, 2023.
  2. BAPTISTA, HÉLDER; FERREIRA, PAULA; NUNES, CLÁUDIA; KOPYL, SVITLANA. Autor correspondente: BAPTISTA, HÉLDER. "PLLA-FF films with piezoelectric properties for application in tissue engineering". Trabalho apresentado em Jornadas CICECO 2022, 2022.
  3. TEIXEIRA, MARIA; COELHO, MANUEL; BAPTISTA, HÉLDER; SILVA, NUNO; PINTO, RICARDO; VILELA, CARLA; FREIRE, CARMEN. "Polysaccharide-protein nanofibers reinforced hydrogels: Production, characterization and potential applications". Trabalho apresentado em ACS Spring 2020 National Meeting & Expo, 2020.
Resumo em conferência
  1. BAPTISTA, HÉLDER; FERREIRA, PAULA; NUNES, CLÁUDIA; KOPYL, SVITLANA. Autor correspondente: BAPTISTA, HÉLDER. "PLLA-FF films with piezoelectric properties for application in tissue engineering". Trabalho apresentado em Jornadas CICECO, Aveiro, 2022.
    Publicado
  2. TEIXEIRA, MARIA ; COELHO, MANUEL; BAPTISTA, HÉLDER; SILVA, NUNO; PINTO, RICARDO; VILELA, CARLA; SILVESTRE, ARMANDO; FREIRE, CARMEN. Autor correspondente: FREIRE, CARMEN. "Polysaccharide-based hydrogels for 3D Bioprinting applications". Trabalho apresentado em 6th International Polysaccharide Conference: EPNOE, Aveiro, 2019.
    Publicado
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2024/11/13 Polysaccharide-based screen-printable ink as colorimetric sensor for fish packaging 20th International Conference on Polysaccharides and Glycoscience (ICPG)
House of Czech Association of Scientific and Technical Societies (Prague , República Checa)
2024/10/30 Screen-printing approach to produce low-cost sensors for the detection of volatile amines Emerging Technologies in Materials Engineering 7th Edition
(Bucareste, Roménia)
2024/07/16 Screen printable bio-based ink for smart food packaging Research Summit 2024
University of Aveiro (Aveiro, Portugal)
2024/06/17 Screen-printable bio-based ink as sensor for fish packaging 5th Symposium on Circular Economy and Sustainability
CIHEAM Mediterranean Agronomic Institute of Chania (Chania, Grécia)
2023/07/12 Screen printable bio-based ink for smart food packaging Research Summit 2023
University of Aveiro (Aveiro, Portugal)

Participação em evento

Descrição da atividade
Tipo de evento
Nome do evento
Instituição / Organização
2024/07/09 - 2024/07/11 Training School organized by the Cost Action CA22134 (Sustainable Network for agrofood loss and waste prevention, management, quantification and valorisation) exploring how to mitigate food losses
Outro
Food loss reduction: a global challenge
Cranfield Institute of Technology, Reino Unido
2023/10/16 - 2023/10/20 40 hour (1.4 ECTs) course exploring reaction kinetics in food science
Outro
Reaction Kinetics in Food Science
Graduate School Voeding Levensmiddelentechnologie Agrobiotechnologie en Gezondheid, Países Baixos
2022/07/05 - 2022/07/08 Series of lectures in the field of porous semiconductors and oxides for application, intended to address challenges in the energy, health and environment sectors.
Seminário
NETPORE Training School - Network on porous semiconductors and oxides
Universidade de Aveiro, Portugal
2021/10/04 - 2021/12/13 Attended all 12 seminars
Seminário
Principles, Applications and Nanotechnology Innovation in Pharmaceutical Sciences, Biological Engineering and Medicine
Universidade de Lisboa, Portugal

The University of Texas at Austin, Estados Unidos
2021/04/01 - 2021/05/28 Attended all 8 webinars
Seminário
International Webinars on Topics on Cell and Tissue Engineering (CTEng)
Universidade de Aveiro, Portugal
2021/03/17 - 2021/03/17 Attended the symposium
Simpósio
2nd Aveiro-Osaka Universities joint symposium on advanced biomaterials and cell-based bioengineering strategies
Universidade de Aveiro, Portugal

Osaka Kokusai Koka Senmonshoku Daigaku, Japão
2018/03/14 - 2021/03/14 Attended the workshop
Oficina (workshop)
6th Workshop in Immunology
Universidade de Aveiro, Portugal
2018/04/18 - 2018/04/18 Attended and helped during the event
Conferência
X Biochemistry Day
Universidade de Aveiro, Portugal
2018/03/07 - 2018/03/07 Attended the workshop
Oficina (workshop)
7th Workshop in Mass spectrometry and Carbohydrates
Universidade de Aveiro, Portugal
2018/02/28 - 2018/02/28 Attended the workshop
Oficina (workshop)
7th Workshop in Lipidomics
Universidade de Aveiro, Portugal
2017/04/19 - 2017/04/19 Competed with the work entitled "Tissue 3D Bioprinting - Reducing the rejection levels of a 3D bioprinted implant"
Concurso
Project Factory: Take Your Ideas To The Next Level!
Universidade de Aveiro, Portugal
Distinções

Prémio

2017 1-year scholarship
Rotary Club de Aveiro, Portugal