???global.info.a_carregar???
Anup Kumar Keshri. Completed the Doktor (PhD) in Mechanical and Materials Engineering in 2010/07/12 by Florida International University. Is Assistant Professor in Indian Institute of Technology Patna.
Identificação

Identificação pessoal

Nome completo
Anup Kumar Keshri

Nomes de citação

  • Keshri, Anup

Identificadores de autor

Ciência ID
8312-903A-C56A
ORCID iD
0000-0001-6929-5810
Formação
Grau Classificação
2006/08/01 - 2010/07/12
Concluído
 Mechanical and Materials Engineering (Doktor (PhD))
Especialização em Materials Science and Engineering
Florida International University, Estados Unidos
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2013/10/01 - Atual Professor Auxiliar (Docente Universitário) Indian Institute of Technology Patna, Índia
Produções

Publicações

Artigo em conferência
  1. Li, X.; Levy, C.; Li, M.; Keshri, A.K.; Agarwal, A.. "A multifunctional MWCNT composite: Strain sensing, damping and application to structural vibration control". 2010.
    10.1115/IMECE2009-11599
  2. Li, X.; Keshri, A.K.; Agarwal, A.; Levy, C.. "A multifunctional MWCNT strain sensor: Sensing and damping characteristics". 2009.
  3. Xiaohua Li; Cesar Levy; Ming Li; Anup Kumar Keshri; Arvind Agarwal. "A Multifunctional MWCNT Composite: Strain Sensing, Damping and Application to Structural Vibration Control". 2009.
    10.1115/imece2009-11599
Artigo em revista
  1. S. Bhanuchandar; G. Vinothkumar; P. Arunkumar; M. Sribalaji; Anup Kumar Keshri; K. Suresh Babu. "Controlled growth of Ni/NiO composite nanoparticles and its influence on exchange anisotropy and spin glass features". Journal of Alloys and Compounds 780 (2019): 256-265. https://doi.org/10.1016%2Fj.jallcom.2018.11.330.
    10.1016/j.jallcom.2018.11.330
  2. Mukherjee, B.; Islam, A.; Pandey, K.K.; Asiq Rahman, O.S.; Kumar, R.; Keshri, A.K.. "Impermeable CeO2 overlay for the protection of plasma sprayed YSZ thermal barrier coating from molten sulfate-vanadate salts". Surface and Coatings Technology 358 (2019): 235-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056806390&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2018.11.048
  3. Islam, A.; Kumar, K.; Pandey, K.K.; Mukherjee, B.; Asiq Rahman, O.S.; Chowdhury, A.; Keshri, A.K.. "Exceptionally high fracture toughness of carbon nanotube reinforced plasma sprayed lanthanum zirconate coatings". Journal of Alloys and Compounds 777 (2019): 1133-1144. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056450816&partnerID=MN8TOARS.
    10.1016/j.jallcom.2018.11.125
  4. M. Sribalaji; Davinder Singh; Swarnima Singh; Aminul Islam; Mayank Kumar Pandey; B. Viswanath; Anup Kumar Keshri. "A new insight on the role of 1-D and 2-D reinforcements in TiC during high temperature plastic deformation". Ceramics International 44 15 (2018): 18389-18399. https://doi.org/10.1016%2Fj.ceramint.2018.07.055.
    10.1016/j.ceramint.2018.07.055
  5. Aditi Pandey; Anup Patel; Ariharan S.; Vikram Kumar; Rajeev Sharma; Satish Kanhed; Vinod Nigam; et al. "Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating". Nanomaterials 8 6 (2018): 363-363. https://doi.org/10.3390%2Fnano8060363.
    10.3390/nano8060363
  6. M. Sribalaji; Aminul Islam; Biswajyoti Mukherjee; Mayank Kumar Pandey; Anup Kumar Keshri. "Tailoring the thermal shock resistance of titanium carbide by reinforcement with tungsten carbide and carbon nanotubes". Ceramics International 44 2 (2018): 2552-2562. https://doi.org/10.1016%2Fj.ceramint.2017.11.011.
    10.1016/j.ceramint.2017.11.011
  7. O.S. Asiq Rahman; M. Sribalaji; Biswajyoti Mukherjee; Tapas Laha; Anup Kumar Keshri. "Synergistic effect of hybrid carbon nanotube and graphene nanoplatelets reinforcement on processing, microstructure, interfacial stress and mechanical properties of Al 2 O 3 nanocomposites". Ceramics International 44 2 (2018): 2109-2122. https://doi.org/10.1016%2Fj.ceramint.2017.10.160.
    10.1016/j.ceramint.2017.10.160
  8. Sony Priyadershini; O.S. Asiq Rahman; Krishna Kant Pandey; Anup Kumar Keshri. "Remarkable improvement in tribological behavior of plasma sprayed carbon nanotube and graphene nanoplatelates hybrid reinforced alumina nanocomposite coating". Ceramics International (2018): https://doi.org/10.1016%2Fj.ceramint.2018.12.043.
    10.1016/j.ceramint.2018.12.043
  9. Islam, A.; Mukherjee, B.; Sribalaji, M.; Rahman, O.S.A.; Arunkumar, P.; Babu, K.S.; Keshri, A.K.. "Role of hybrid reinforcement of carbon nanotubes and graphene nanoplatelets on the electrical conductivity of plasma sprayed alumina coating". Ceramics International 44 4 (2018): 4508-4511. http://www.scopus.com/inward/record.url?eid=2-s2.0-85037056305&partnerID=MN8TOARS.
    10.1016/j.ceramint.2017.12.021
  10. Mukherjee, B.; Kumar, R.; Islam, A.; Rahman, O.S.A.; Keshri, A.K.. "Evaluation of strength-ductility combination by in-situ tensile testing of graphene nano platelets reinforced shroud plasma sprayed Nickel-Aluminium coating". Journal of Alloys and Compounds 765 (2018): 1082-1089. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049351541&partnerID=MN8TOARS.
    10.1016/j.jallcom.2018.06.278
  11. Arunkumar, P.; Aarthi, U.; Sribalaji, M.; Mukherjee, B.; Keshri, A.K.; Tanveer, W.H.; Cha, S.-W.; Babu, K.S.. "Deposition rate dependent phase/mechanical property evolution in zirconia and ceria-zirconia thin film by EB-PVD technique". Journal of Alloys and Compounds 765 (2018): 418-427. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049033914&partnerID=MN8TOARS.
    10.1016/j.jallcom.2018.06.232
  12. M. Sribalaji; Biswajyoti Mukherjee; Aminul Islam; Anup Kumar Keshri. "Microstructural and mechanical behavior of spark plasma sintered titanium carbide with hybrid reinforcement of tungsten carbide and carbon nanotubes". Materials Science and Engineering: A 702 (2017): 10-21. https://doi.org/10.1016%2Fj.msea.2017.06.108.
    10.1016/j.msea.2017.06.108
  13. M. Sribalaji; Biswajyoti Mukherjee; Srinivasa Rao Bakshi; P. Arunkumar; K. Suresh Babu; Anup Kumar Keshri. "In-situ formed graphene nanoribbon induced toughening and thermal shock resistance of spark plasma sintered carbon nanotube reinforced titanium carbide composite". Composites Part B: Engineering 123 (2017): 227-240. https://doi.org/10.1016%2Fj.compositesb.2017.05.035.
    10.1016/j.compositesb.2017.05.035
  14. Arunkumar, P.; Panda, P.; Sribalaji, M.; Ramaseshan, R.; Keshri, A.K.; Babu, K.S.. "Enhancing the oxygen ionic conductivity of (111) oriented Ce0.80Sm0.20O2-dthin film through strain engineering". Electrochimica Acta 240 (2017): 437-446. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018757752&partnerID=MN8TOARS.
    10.1016/j.electacta.2017.04.077
  15. Biswajyoti Mukherjee; O.S. Asiq Rahman; Aminul Islam; M. Sribalaji; Anup Kumar Keshri. "Plasma sprayed carbon nanotube and graphene nanoplatelets reinforced alumina hybrid composite coating with outstanding toughness". Journal of Alloys and Compounds 727 (2017): 658-670. https://doi.org/10.1016%2Fj.jallcom.2017.08.160.
    10.1016/j.jallcom.2017.08.160
  16. M. Sribalaji; O. S. Asiq Rahman; P. Arun Kumar; K. Suresh Babu; Nitin P. Wasekar; G. Sundararajan; Anup Kumar Keshri. "Role of Silicon Carbide in Phase-Evolution and Oxidation Behaviors of Pulse Electrodeposited Nickel-Tungsten Coating". Metallurgical and Materials Transactions A 48 1 (2016): 501-512. https://doi.org/10.1007%2Fs11661-016-3847-2.
    10.1007/s11661-016-3847-2
  17. Anil Kumar; Asfak Ali Mollah; Anup Kumar Keshri; Manoj Kumar; Kulvir Singh; Krishna Dutt Venkata Shiva Rallabhandi; Raghunandan Seelaboyina. "Development of Macroporous Silicone Rubber for Acoustic Applications". Industrial & Engineering Chemistry Research 55 32 (2016): 8751-8760. https://doi.org/10.1021%2Facs.iecr.6b02051.
    10.1021/acs.iecr.6b02051
  18. Anup Kumar Keshri; Lovish Behl; Debrupa Lahiri; George S. Dulikravich; Arvind Agarwal. "Dry Sliding Wear Behavior of Hafnium-Based Bulk Metallic Glass at Room and Elevated Temperatures". Journal of Materials Engineering and Performance 25 9 (2016): 3931-3937. https://doi.org/10.1007%2Fs11665-016-2242-x.
    10.1007/s11665-016-2242-x
  19. M. Sribalaji; O.S. Asiq Rahman; Tapas Laha; Anup Kumar Keshri. "Nanoindentation and nanoscratch behavior of electroless deposited nickel-phosphorous coating". Materials Chemistry and Physics 177 (2016): 220-228. https://doi.org/10.1016%2Fj.matchemphys.2016.04.022.
    10.1016/j.matchemphys.2016.04.022
  20. O.S. Asiq Rahman; Nitin P. Wasekar; G. Sundararajan; Anup Kumar Keshri. "Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating". Materials Characterization 116 (2016): 1-7. https://doi.org/10.1016%2Fj.matchar.2016.04.002.
    10.1016/j.matchar.2016.04.002
  21. Swarnima Singh; M. Sribalaji; Nitin P. Wasekar; Srikant Joshi; G. Sundararajan; Raghuvir Singh; Anup Kumar Keshri. "Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel–tungsten composite coatings". Applied Surface Science 364 (2016): 264-272. https://doi.org/10.1016%2Fj.apsusc.2015.12.179.
    10.1016/j.apsusc.2015.12.179
  22. U. Aarthi; P. Arunkumar; M. Sribalaji; Anup Kumar Keshri; K. Suresh Babu. "Strontium mediated modification of structure and ionic conductivity in samarium doped ceria/sodium carbonate nanocomposites as electrolytes for LTSOFC". RSC Advances 6 88 (2016): 84860-84870. https://doi.org/10.1039%2Fc6ra17926f.
    10.1039/c6ra17926f
  23. Uthayakumar, A.; Pandian, A.; Mathiyalagan, S.; Kumar, A.; Keshri, A.K.; Omar, S.; Balani, K.; Krishna Moorthy, S.B.. "Interfacial Effect of the Oxygen-Ion Distribution on the Conduction Mechanism in Strontium-Added Ce0.8Sm0.2O2-d/Na2CO3 Nanocomposite". Journal of Physical Chemistry C 120 43 (2016): 25068-25077. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994578298&partnerID=MN8TOARS.
    10.1021/acs.jpcc.6b07915
  24. Biswajyoti Mukherjee; O.S. Asiq Rahman; M Sribalaji; Srinivasa Rao Bakshi; Anup Kumar Keshri. "Synergistic effect of carbon nanotube as sintering aid and toughening agent in spark plasma sintered molybdenum disilicide-hafnium carbide composite". Materials Science and Engineering: A 678 (2016): 299-307. https://doi.org/10.1016%2Fj.msea.2016.10.009.
    10.1016/j.msea.2016.10.009
  25. M. Sribalaji; P. Arunkumar; K. Suresh Babu; Anup Kumar Keshri. "Crystallization mechanism and corrosion property of electroless nickel phosphorus coating during intermediate temperature oxidation". Applied Surface Science 355 (2015): 112-120. https://doi.org/10.1016%2Fj.apsusc.2015.07.061.
    10.1016/j.apsusc.2015.07.061
  26. Lahiri, D.; Karp, J.; Keshri, A.K.; Zhang, C.; Dulikravich, G.S.; Kecskes, L.J.; Agarwal, A.. "Scratch induced deformation behavior of hafnium based bulk metallic glass at multiple load scales". Journal of Non-Crystalline Solids 410 (2015): 118-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919807865&partnerID=MN8TOARS.
    10.1016/j.jnoncrysol.2014.12.010
  27. Raghunandan Seelaboyina; Manoj Kumar; Alekhya Venkata Madiraju; Kshitij Taneja; Anup Kumar Keshri; Sarang Mahajan; Kulvir Singh. "Microwave synthesis of copper indium gallium (di)selenide nanopowders for thin film solar applications". Journal of Renewable and Sustainable Energy 5 3 (2013): 031608-031608. https://doi.org/10.1063%2F1.4808201.
    10.1063/1.4808201
  28. Neelima Mahato; Samir Sharma; Anup Kumar Keshri; Amanda Simpson; Arvind Agarwal; Kantesh Balani. "Nanomechanical Properties and Thermal Conductivity Estimation of Plasma-Sprayed, Solid-Oxide Fuel Cell Components: Ceria-Doped, Yttria-Stabilized Zirconia Electrolyte". JOM 65 6 (2013): 749-762. https://doi.org/10.1007%2Fs11837-013-0601-8.
    10.1007/s11837-013-0601-8
  29. Anup Kumar Keshri; Arvind Agarwal. "Plasma Processing of Nanomaterials for Functional Applications—A Review". Nanoscience and Nanotechnology Letters 4 3 (2013): 228-250. https://doi.org/10.1166%2Fnnl.2012.1324.
    10.1166/nnl.2012.1324
  30. Manoj Kumar; Raghunandan Seelaboyina; Kshitij Taneja; Alekhya Venkata Madiraju; Anup Kumar Keshri; Sarang Mahajan; Kulvir Singh. "Synthesis of CIS Nanoink and Its Absorber Layer without Selenization". Conference Papers in Energy 2013 (2013): 1-3. https://doi.org/10.1155%2F2013%2F739532.
    10.1155/2013/739532
  31. Alekhya Venkata Madiraju; Kshitij Taneja; Manoj Kumar; Anup Kumar Keshri; Sarang Balkrushna Mahajan; Raghunandan Seelaboyina. "Synthesis of CZTS in Aqueous Media Using Microwave Irradiation". Conference Papers in Energy 2013 (2013): 1-3. https://doi.org/10.1155%2F2013%2F962730.
    10.1155/2013/962730
  32. Ariharan, S.; Gupta, A.; Keshri, A.; Agarwal, A.; Balani, K.. "Size effect of yttria stabilized zirconia addition on fracture toughness and thermal conductivity of plasma sprayed aluminum oxide composite coatings". Nanoscience and Nanotechnology Letters 4 3 (2012): 323-332. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864852144&partnerID=MN8TOARS.
    10.1166/nnl.2012.1317
  33. Anup Kumar Keshri; Debrupa Lahiri; Arvind Agarwal. "Carbon nanotubes improve the adhesion strength of a ceramic splat to the steel substrate". Carbon 49 13 (2011): 4340-4347. https://doi.org/10.1016%2Fj.carbon.2011.06.010.
    10.1016/j.carbon.2011.06.010
  34. Anup Kumar Keshri; Arvind Agarwal. "Splat morphology of plasma sprayed aluminum oxide reinforced with carbon nanotubes: A comparison between experiments and simulation". Surface and Coatings Technology 206 2-3 (2011): 338-347. https://doi.org/10.1016%2Fj.surfcoat.2011.07.025.
    10.1016/j.surfcoat.2011.07.025
  35. Anup Kumar Keshri; Arvind Agarwal. "Wear Behavior of Plasma-Sprayed Carbon Nanotube-Reinforced Aluminum Oxide Coating in Marine and High-Temperature Environments". Journal of Thermal Spray Technology 20 6 (2011): 1217-1230. https://doi.org/10.1007%2Fs11666-011-9669-2.
    10.1007/s11666-011-9669-2
  36. Debrupa Lahiri; Virendra Singh; Anup K Keshri; Sudipta Seal; Arvind Agarwal. "Apatite formability of boron nitride nanotubes". Nanotechnology 22 20 (2011): 205601-205601. https://doi.org/10.1088%2F0957-4484%2F22%2F20%2F205601.
    10.1088/0957-4484/22/20/205601
  37. Bakshi, S.R.; Keshri, A.K.; Agarwal, A.. "A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale". Materials Science and Engineering A 528 9 (2011): 3375-3384. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951672888&partnerID=MN8TOARS.
    10.1016/j.msea.2011.01.061
  38. Singh, A.; Bakshi, S.R.; Virzi, D.A.; Keshri, A.K.; Agarwal, A.; Harimkar, S.P.. "In-situ synthesis of TiC/SiC/Ti3SiC2composite coatings by spark plasma sintering". Surface and Coatings Technology 205 13-14 (2011): 3840-3846. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952487050&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2011.01.058
  39. Bakshi, S.R.; Musaramthota, V.; Virzi, D.A.; Keshri, A.K.; Lahiri, D.; Singh, V.; Seal, S.; Agarwal, A.. "Spark plasma sintered tantalum carbide-carbon nanotube composite: Effect of pressure, carbon nanotube length and dispersion technique on microstructure and mechanical properties". Materials Science and Engineering A 528 6 (2011): 2538-2547. http://www.scopus.com/inward/record.url?eid=2-s2.0-79151476639&partnerID=MN8TOARS.
    10.1016/j.msea.2010.12.017
  40. Balani, K.; Patel, R.R.; Keshri, A.K.; Lahiri, D.; Agarwal, A.. "Multi-scale hierarchy of Chelydra serpentina: Microstructure and mechanical properties of turtle shell". Journal of the Mechanical Behavior of Biomedical Materials 4 7 (2011): 1440-1451. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960558686&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2011.05.014
  41. Debrupa Lahiri; Ana Paula Benaduce; Francois Rouzaud; Jonathan Solomon; Anup Kumar Keshri; Lidia Kos; Arvind Agarwal. "Wear behavior and in vitro cytotoxicity of wear debris generated from hydroxyapatite-carbon nanotube composite coating". Journal of Biomedical Materials Research Part A 96A 1 (2010): 1-12. https://doi.org/10.1002%2Fjbm.a.32952.
    10.1002/jbm.a.32952
  42. Anup Kumar Keshri; Riken Patel; Arvind Agarwal. "Comprehensive process maps to synthesize high density plasma sprayed aluminum oxide composite coatings with varying carbon nanotube content". Surface and Coatings Technology 205 3 (2010): 690-702. https://doi.org/10.1016%2Fj.surfcoat.2010.07.007.
    10.1016/j.surfcoat.2010.07.007
  43. Riken R. Patel; Anup Kumar Keshri; George S. Dulikravich; Arvind Agarwal. "An experimental and computational methodology for near net shape fabrication of thin walled ceramic structures by plasma spray forming". Journal of Materials Processing Technology 210 10 (2010): 1260-1269. https://doi.org/10.1016%2Fj.jmatprotec.2010.03.012.
    10.1016/j.jmatprotec.2010.03.012
  44. Anup Kumar Keshri; Virendra Singh; Jun Huang; Sudipta Seal; Wonbong Choi; Arvind Agarwal. "Intermediate temperature tribological behavior of carbon nanotube reinforced plasma sprayed aluminum oxide coating". Surface and Coatings Technology 204 11 (2010): 1847-1855. https://doi.org/10.1016%2Fj.surfcoat.2009.11.032.
    10.1016/j.surfcoat.2009.11.032
  45. Lahiri, D.; Rouzaud, F.; Richard, T.; Keshri, A.K.; Bakshi, S.R.; Kos, L.; Agarwal, A.. "Boron nitride nanotube reinforced polylactide-polycaprolactone copolymer composite: Mechanical properties and cytocompatibility with osteoblasts and macrophages in vitro". Acta Biomaterialia 6 9 (2010): 3524-3533. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954876767&partnerID=MN8TOARS.
    10.1016/j.actbio.2010.02.044
  46. Keshri, A.K.; Huang, J.; Singh, V.; Choi, W.; Seal, S.; Agarwal, A.. "Synthesis of aluminum oxide coating with carbon nanotube reinforcement produced by chemical vapor deposition for improved fracture and wear resistance". Carbon 48 2 (2010): 431-442. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449705876&partnerID=MN8TOARS.
    10.1016/j.carbon.2009.08.046
  47. Lahiri, D.; Singh, V.; Keshri, A.K.; Seal, S.; Agarwal, A.. "Carbon nanotube toughened hydroxyapatite by spark plasma sintering: Microstructural evolution and multiscale tribological properties". Carbon 48 11 (2010): 3103-3120. http://www.scopus.com/inward/record.url?eid=2-s2.0-78649332532&partnerID=MN8TOARS.
    10.1016/j.carbon.2010.04.047
  48. Anup Kumar Keshri; Kantesh Balani; Srinivasa R. Bakshi; Virendra Singh; Tapas Laha; Sudipta Seal; Arvind Agarwal. "Structural transformations in carbon nanotubes during thermal spray processing". Surface and Coatings Technology 203 16 (2009): 2193-2201. https://doi.org/10.1016%2Fj.surfcoat.2009.02.013.
    10.1016/j.surfcoat.2009.02.013
  49. Lahiri, D.; Bakshi, S.R.; Keshri, A.K.; Liu, Y.; Agarwal, A.. "Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites". Materials Science and Engineering A 523 1-2 (2009): 263-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-68949196344&partnerID=MN8TOARS.
    10.1016/j.msea.2009.06.006
  50. Bakshi, S.R.; Keshri, A.K.; Singh, V.; Seal, S.; Agarwal, A.. "Interface in carbon nanotube reinforced aluminum silicon composites: Thermodynamic analysis and experimental verification". Journal of Alloys and Compounds 481 1-2 (2009): 207-213. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649253161&partnerID=MN8TOARS.
    10.1016/j.jallcom.2009.03.055
  51. Bakshi, S.R.; Wang, D.; Price, T.; Zhang, D.; Keshri, A.K.; Chen, Y.; McCartney, D.G.; Shipway, P.H.; Agarwal, A.. "Microstructure and wear properties of aluminum/aluminum-silicon composite coatings prepared by cold spraying". Surface and Coatings Technology 204 4 (2009): 503-510. http://www.scopus.com/inward/record.url?eid=2-s2.0-70249130867&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2009.08.018
  52. Keshri, A.K.; Bakshi, S.R.; Chen, Y.; Laha, T.; Li, X.; Levy, C.; Agarwal, A.. "Nanomechanical behaviour of plasma sprayed PZT coatings". Surface Engineering 25 4 (2009): 270-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-67149144602&partnerID=MN8TOARS.
    10.1179/026708408X375307
  53. Balani, K.; Lahiri, D.; Keshri, A.K.; Bakshi, S.R.; Tercero, J.E.; Agarwal, A.. "The nano-scratch behavior of biocompatible hydroxyapatite reinforced with aluminum oxide and carbon nanotubes". JOM 61 9 (2009): 63-66. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449372951&partnerID=MN8TOARS.
    10.1007/s11837-009-0136-1
  54. Lahiri, D.; Rouzaud, F.; Namin, S.; Keshri, A.K.; Valdés, J.J.; Kos, L.; Tsoukias, N.; Agarwal, A.. "Carbon nanotube reinforced polylactide-caprolactone copolymer: Mechanical strengthening and interaction with human osteoblasts in vitro". ACS Applied Materials and Interfaces 1 11 (2009): 2470-2476. http://www.scopus.com/inward/record.url?eid=2-s2.0-77951213989&partnerID=MN8TOARS.
    10.1021/am900423q
  55. Chen, Y.; Omar, S.; Keshri, A.K.; Balani, K.; Babu, K.; Nino, J.C.; Seal, S.; Agarwal, A.. "Ionic conductivity of plasma-sprayed nanocrystalline yttria-stabilized zirconia electrolyte for solid oxide fuel cells". Scripta Materialia 60 11 (2009): 1023-1026. http://www.scopus.com/inward/record.url?eid=2-s2.0-62849104850&partnerID=MN8TOARS.
    10.1016/j.scriptamat.2009.02.036
  56. Kantesh Balani; Sandip P. Harimkar; Anup Keshri; Yao Chen; Narendra B. Dahotre; Arvind Agarwal. "Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating". Acta Materialia 56 20 (2008): 5984-5994. https://doi.org/10.1016%2Fj.actamat.2008.08.020.
    10.1016/j.actamat.2008.08.020
Livro
  1. Keshri, A.K.; Sribalaji, M.. Coatings for energy applications. 2015.