???global.info.a_carregar???
Anup Kumar Keshri. Completed the Doktor (PhD) in Mechanical and Materials Engineering in 2010/07/12 by Florida International University. Is Assistant Professor in Indian Institute of Technology Patna.
Identification

Personal identification

Full name
Anup Kumar Keshri

Citation names

  • Keshri, Anup

Author identifiers

Ciência ID
8312-903A-C56A
ORCID iD
0000-0001-6929-5810
Education
Degree Classification
2006/08/01 - 2010/07/12
Concluded
 Mechanical and Materials Engineering (Doktor (PhD))
Major in Materials Science and Engineering
Florida International University, United States
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2013/10/01 - Current Assistant Professor (University Teacher) Indian Institute of Technology Patna, India
Outputs

Publications

Book
  1. Keshri, A.K.; Sribalaji, M.. Coatings for energy applications. 2015.
Conference paper
  1. Li, X.; Levy, C.; Li, M.; Keshri, A.K.; Agarwal, A.. "A multifunctional MWCNT composite: Strain sensing, damping and application to structural vibration control". 2010.
    10.1115/IMECE2009-11599
  2. Li, X.; Keshri, A.K.; Agarwal, A.; Levy, C.. "A multifunctional MWCNT strain sensor: Sensing and damping characteristics". 2009.
  3. Xiaohua Li; Cesar Levy; Ming Li; Anup Kumar Keshri; Arvind Agarwal. "A Multifunctional MWCNT Composite: Strain Sensing, Damping and Application to Structural Vibration Control". 2009.
    10.1115/imece2009-11599
Journal article
  1. S. Bhanuchandar; G. Vinothkumar; P. Arunkumar; M. Sribalaji; Anup Kumar Keshri; K. Suresh Babu. "Controlled growth of Ni/NiO composite nanoparticles and its influence on exchange anisotropy and spin glass features". Journal of Alloys and Compounds 780 (2019): 256-265. https://doi.org/10.1016%2Fj.jallcom.2018.11.330.
    10.1016/j.jallcom.2018.11.330
  2. Mukherjee, B.; Islam, A.; Pandey, K.K.; Asiq Rahman, O.S.; Kumar, R.; Keshri, A.K.. "Impermeable CeO2 overlay for the protection of plasma sprayed YSZ thermal barrier coating from molten sulfate-vanadate salts". Surface and Coatings Technology 358 (2019): 235-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056806390&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2018.11.048
  3. Islam, A.; Kumar, K.; Pandey, K.K.; Mukherjee, B.; Asiq Rahman, O.S.; Chowdhury, A.; Keshri, A.K.. "Exceptionally high fracture toughness of carbon nanotube reinforced plasma sprayed lanthanum zirconate coatings". Journal of Alloys and Compounds 777 (2019): 1133-1144. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056450816&partnerID=MN8TOARS.
    10.1016/j.jallcom.2018.11.125
  4. M. Sribalaji; Davinder Singh; Swarnima Singh; Aminul Islam; Mayank Kumar Pandey; B. Viswanath; Anup Kumar Keshri. "A new insight on the role of 1-D and 2-D reinforcements in TiC during high temperature plastic deformation". Ceramics International 44 15 (2018): 18389-18399. https://doi.org/10.1016%2Fj.ceramint.2018.07.055.
    10.1016/j.ceramint.2018.07.055
  5. Aditi Pandey; Anup Patel; Ariharan S.; Vikram Kumar; Rajeev Sharma; Satish Kanhed; Vinod Nigam; et al. "Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating". Nanomaterials 8 6 (2018): 363-363. https://doi.org/10.3390%2Fnano8060363.
    10.3390/nano8060363
  6. M. Sribalaji; Aminul Islam; Biswajyoti Mukherjee; Mayank Kumar Pandey; Anup Kumar Keshri. "Tailoring the thermal shock resistance of titanium carbide by reinforcement with tungsten carbide and carbon nanotubes". Ceramics International 44 2 (2018): 2552-2562. https://doi.org/10.1016%2Fj.ceramint.2017.11.011.
    10.1016/j.ceramint.2017.11.011
  7. O.S. Asiq Rahman; M. Sribalaji; Biswajyoti Mukherjee; Tapas Laha; Anup Kumar Keshri. "Synergistic effect of hybrid carbon nanotube and graphene nanoplatelets reinforcement on processing, microstructure, interfacial stress and mechanical properties of Al 2 O 3 nanocomposites". Ceramics International 44 2 (2018): 2109-2122. https://doi.org/10.1016%2Fj.ceramint.2017.10.160.
    10.1016/j.ceramint.2017.10.160
  8. Sony Priyadershini; O.S. Asiq Rahman; Krishna Kant Pandey; Anup Kumar Keshri. "Remarkable improvement in tribological behavior of plasma sprayed carbon nanotube and graphene nanoplatelates hybrid reinforced alumina nanocomposite coating". Ceramics International (2018): https://doi.org/10.1016%2Fj.ceramint.2018.12.043.
    10.1016/j.ceramint.2018.12.043
  9. Islam, A.; Mukherjee, B.; Sribalaji, M.; Rahman, O.S.A.; Arunkumar, P.; Babu, K.S.; Keshri, A.K.. "Role of hybrid reinforcement of carbon nanotubes and graphene nanoplatelets on the electrical conductivity of plasma sprayed alumina coating". Ceramics International 44 4 (2018): 4508-4511. http://www.scopus.com/inward/record.url?eid=2-s2.0-85037056305&partnerID=MN8TOARS.
    10.1016/j.ceramint.2017.12.021
  10. Mukherjee, B.; Kumar, R.; Islam, A.; Rahman, O.S.A.; Keshri, A.K.. "Evaluation of strength-ductility combination by in-situ tensile testing of graphene nano platelets reinforced shroud plasma sprayed Nickel-Aluminium coating". Journal of Alloys and Compounds 765 (2018): 1082-1089. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049351541&partnerID=MN8TOARS.
    10.1016/j.jallcom.2018.06.278
  11. Arunkumar, P.; Aarthi, U.; Sribalaji, M.; Mukherjee, B.; Keshri, A.K.; Tanveer, W.H.; Cha, S.-W.; Babu, K.S.. "Deposition rate dependent phase/mechanical property evolution in zirconia and ceria-zirconia thin film by EB-PVD technique". Journal of Alloys and Compounds 765 (2018): 418-427. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049033914&partnerID=MN8TOARS.
    10.1016/j.jallcom.2018.06.232
  12. M. Sribalaji; Biswajyoti Mukherjee; Aminul Islam; Anup Kumar Keshri. "Microstructural and mechanical behavior of spark plasma sintered titanium carbide with hybrid reinforcement of tungsten carbide and carbon nanotubes". Materials Science and Engineering: A 702 (2017): 10-21. https://doi.org/10.1016%2Fj.msea.2017.06.108.
    10.1016/j.msea.2017.06.108
  13. M. Sribalaji; Biswajyoti Mukherjee; Srinivasa Rao Bakshi; P. Arunkumar; K. Suresh Babu; Anup Kumar Keshri. "In-situ formed graphene nanoribbon induced toughening and thermal shock resistance of spark plasma sintered carbon nanotube reinforced titanium carbide composite". Composites Part B: Engineering 123 (2017): 227-240. https://doi.org/10.1016%2Fj.compositesb.2017.05.035.
    10.1016/j.compositesb.2017.05.035
  14. Arunkumar, P.; Panda, P.; Sribalaji, M.; Ramaseshan, R.; Keshri, A.K.; Babu, K.S.. "Enhancing the oxygen ionic conductivity of (111) oriented Ce0.80Sm0.20O2-dthin film through strain engineering". Electrochimica Acta 240 (2017): 437-446. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018757752&partnerID=MN8TOARS.
    10.1016/j.electacta.2017.04.077
  15. Biswajyoti Mukherjee; O.S. Asiq Rahman; Aminul Islam; M. Sribalaji; Anup Kumar Keshri. "Plasma sprayed carbon nanotube and graphene nanoplatelets reinforced alumina hybrid composite coating with outstanding toughness". Journal of Alloys and Compounds 727 (2017): 658-670. https://doi.org/10.1016%2Fj.jallcom.2017.08.160.
    10.1016/j.jallcom.2017.08.160
  16. M. Sribalaji; O. S. Asiq Rahman; P. Arun Kumar; K. Suresh Babu; Nitin P. Wasekar; G. Sundararajan; Anup Kumar Keshri. "Role of Silicon Carbide in Phase-Evolution and Oxidation Behaviors of Pulse Electrodeposited Nickel-Tungsten Coating". Metallurgical and Materials Transactions A 48 1 (2016): 501-512. https://doi.org/10.1007%2Fs11661-016-3847-2.
    10.1007/s11661-016-3847-2
  17. Anil Kumar; Asfak Ali Mollah; Anup Kumar Keshri; Manoj Kumar; Kulvir Singh; Krishna Dutt Venkata Shiva Rallabhandi; Raghunandan Seelaboyina. "Development of Macroporous Silicone Rubber for Acoustic Applications". Industrial & Engineering Chemistry Research 55 32 (2016): 8751-8760. https://doi.org/10.1021%2Facs.iecr.6b02051.
    10.1021/acs.iecr.6b02051
  18. Anup Kumar Keshri; Lovish Behl; Debrupa Lahiri; George S. Dulikravich; Arvind Agarwal. "Dry Sliding Wear Behavior of Hafnium-Based Bulk Metallic Glass at Room and Elevated Temperatures". Journal of Materials Engineering and Performance 25 9 (2016): 3931-3937. https://doi.org/10.1007%2Fs11665-016-2242-x.
    10.1007/s11665-016-2242-x
  19. M. Sribalaji; O.S. Asiq Rahman; Tapas Laha; Anup Kumar Keshri. "Nanoindentation and nanoscratch behavior of electroless deposited nickel-phosphorous coating". Materials Chemistry and Physics 177 (2016): 220-228. https://doi.org/10.1016%2Fj.matchemphys.2016.04.022.
    10.1016/j.matchemphys.2016.04.022
  20. O.S. Asiq Rahman; Nitin P. Wasekar; G. Sundararajan; Anup Kumar Keshri. "Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating". Materials Characterization 116 (2016): 1-7. https://doi.org/10.1016%2Fj.matchar.2016.04.002.
    10.1016/j.matchar.2016.04.002
  21. Swarnima Singh; M. Sribalaji; Nitin P. Wasekar; Srikant Joshi; G. Sundararajan; Raghuvir Singh; Anup Kumar Keshri. "Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel–tungsten composite coatings". Applied Surface Science 364 (2016): 264-272. https://doi.org/10.1016%2Fj.apsusc.2015.12.179.
    10.1016/j.apsusc.2015.12.179
  22. U. Aarthi; P. Arunkumar; M. Sribalaji; Anup Kumar Keshri; K. Suresh Babu. "Strontium mediated modification of structure and ionic conductivity in samarium doped ceria/sodium carbonate nanocomposites as electrolytes for LTSOFC". RSC Advances 6 88 (2016): 84860-84870. https://doi.org/10.1039%2Fc6ra17926f.
    10.1039/c6ra17926f
  23. Uthayakumar, A.; Pandian, A.; Mathiyalagan, S.; Kumar, A.; Keshri, A.K.; Omar, S.; Balani, K.; Krishna Moorthy, S.B.. "Interfacial Effect of the Oxygen-Ion Distribution on the Conduction Mechanism in Strontium-Added Ce0.8Sm0.2O2-d/Na2CO3 Nanocomposite". Journal of Physical Chemistry C 120 43 (2016): 25068-25077. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994578298&partnerID=MN8TOARS.
    10.1021/acs.jpcc.6b07915
  24. Biswajyoti Mukherjee; O.S. Asiq Rahman; M Sribalaji; Srinivasa Rao Bakshi; Anup Kumar Keshri. "Synergistic effect of carbon nanotube as sintering aid and toughening agent in spark plasma sintered molybdenum disilicide-hafnium carbide composite". Materials Science and Engineering: A 678 (2016): 299-307. https://doi.org/10.1016%2Fj.msea.2016.10.009.
    10.1016/j.msea.2016.10.009
  25. M. Sribalaji; P. Arunkumar; K. Suresh Babu; Anup Kumar Keshri. "Crystallization mechanism and corrosion property of electroless nickel phosphorus coating during intermediate temperature oxidation". Applied Surface Science 355 (2015): 112-120. https://doi.org/10.1016%2Fj.apsusc.2015.07.061.
    10.1016/j.apsusc.2015.07.061
  26. Lahiri, D.; Karp, J.; Keshri, A.K.; Zhang, C.; Dulikravich, G.S.; Kecskes, L.J.; Agarwal, A.. "Scratch induced deformation behavior of hafnium based bulk metallic glass at multiple load scales". Journal of Non-Crystalline Solids 410 (2015): 118-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919807865&partnerID=MN8TOARS.
    10.1016/j.jnoncrysol.2014.12.010
  27. Raghunandan Seelaboyina; Manoj Kumar; Alekhya Venkata Madiraju; Kshitij Taneja; Anup Kumar Keshri; Sarang Mahajan; Kulvir Singh. "Microwave synthesis of copper indium gallium (di)selenide nanopowders for thin film solar applications". Journal of Renewable and Sustainable Energy 5 3 (2013): 031608-031608. https://doi.org/10.1063%2F1.4808201.
    10.1063/1.4808201
  28. Neelima Mahato; Samir Sharma; Anup Kumar Keshri; Amanda Simpson; Arvind Agarwal; Kantesh Balani. "Nanomechanical Properties and Thermal Conductivity Estimation of Plasma-Sprayed, Solid-Oxide Fuel Cell Components: Ceria-Doped, Yttria-Stabilized Zirconia Electrolyte". JOM 65 6 (2013): 749-762. https://doi.org/10.1007%2Fs11837-013-0601-8.
    10.1007/s11837-013-0601-8
  29. Anup Kumar Keshri; Arvind Agarwal. "Plasma Processing of Nanomaterials for Functional Applications—A Review". Nanoscience and Nanotechnology Letters 4 3 (2013): 228-250. https://doi.org/10.1166%2Fnnl.2012.1324.
    10.1166/nnl.2012.1324
  30. Manoj Kumar; Raghunandan Seelaboyina; Kshitij Taneja; Alekhya Venkata Madiraju; Anup Kumar Keshri; Sarang Mahajan; Kulvir Singh. "Synthesis of CIS Nanoink and Its Absorber Layer without Selenization". Conference Papers in Energy 2013 (2013): 1-3. https://doi.org/10.1155%2F2013%2F739532.
    10.1155/2013/739532
  31. Alekhya Venkata Madiraju; Kshitij Taneja; Manoj Kumar; Anup Kumar Keshri; Sarang Balkrushna Mahajan; Raghunandan Seelaboyina. "Synthesis of CZTS in Aqueous Media Using Microwave Irradiation". Conference Papers in Energy 2013 (2013): 1-3. https://doi.org/10.1155%2F2013%2F962730.
    10.1155/2013/962730
  32. Ariharan, S.; Gupta, A.; Keshri, A.; Agarwal, A.; Balani, K.. "Size effect of yttria stabilized zirconia addition on fracture toughness and thermal conductivity of plasma sprayed aluminum oxide composite coatings". Nanoscience and Nanotechnology Letters 4 3 (2012): 323-332. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864852144&partnerID=MN8TOARS.
    10.1166/nnl.2012.1317
  33. Anup Kumar Keshri; Debrupa Lahiri; Arvind Agarwal. "Carbon nanotubes improve the adhesion strength of a ceramic splat to the steel substrate". Carbon 49 13 (2011): 4340-4347. https://doi.org/10.1016%2Fj.carbon.2011.06.010.
    10.1016/j.carbon.2011.06.010
  34. Anup Kumar Keshri; Arvind Agarwal. "Splat morphology of plasma sprayed aluminum oxide reinforced with carbon nanotubes: A comparison between experiments and simulation". Surface and Coatings Technology 206 2-3 (2011): 338-347. https://doi.org/10.1016%2Fj.surfcoat.2011.07.025.
    10.1016/j.surfcoat.2011.07.025
  35. Anup Kumar Keshri; Arvind Agarwal. "Wear Behavior of Plasma-Sprayed Carbon Nanotube-Reinforced Aluminum Oxide Coating in Marine and High-Temperature Environments". Journal of Thermal Spray Technology 20 6 (2011): 1217-1230. https://doi.org/10.1007%2Fs11666-011-9669-2.
    10.1007/s11666-011-9669-2
  36. Debrupa Lahiri; Virendra Singh; Anup K Keshri; Sudipta Seal; Arvind Agarwal. "Apatite formability of boron nitride nanotubes". Nanotechnology 22 20 (2011): 205601-205601. https://doi.org/10.1088%2F0957-4484%2F22%2F20%2F205601.
    10.1088/0957-4484/22/20/205601
  37. Bakshi, S.R.; Keshri, A.K.; Agarwal, A.. "A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale". Materials Science and Engineering A 528 9 (2011): 3375-3384. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951672888&partnerID=MN8TOARS.
    10.1016/j.msea.2011.01.061
  38. Singh, A.; Bakshi, S.R.; Virzi, D.A.; Keshri, A.K.; Agarwal, A.; Harimkar, S.P.. "In-situ synthesis of TiC/SiC/Ti3SiC2composite coatings by spark plasma sintering". Surface and Coatings Technology 205 13-14 (2011): 3840-3846. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952487050&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2011.01.058
  39. Bakshi, S.R.; Musaramthota, V.; Virzi, D.A.; Keshri, A.K.; Lahiri, D.; Singh, V.; Seal, S.; Agarwal, A.. "Spark plasma sintered tantalum carbide-carbon nanotube composite: Effect of pressure, carbon nanotube length and dispersion technique on microstructure and mechanical properties". Materials Science and Engineering A 528 6 (2011): 2538-2547. http://www.scopus.com/inward/record.url?eid=2-s2.0-79151476639&partnerID=MN8TOARS.
    10.1016/j.msea.2010.12.017
  40. Balani, K.; Patel, R.R.; Keshri, A.K.; Lahiri, D.; Agarwal, A.. "Multi-scale hierarchy of Chelydra serpentina: Microstructure and mechanical properties of turtle shell". Journal of the Mechanical Behavior of Biomedical Materials 4 7 (2011): 1440-1451. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960558686&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2011.05.014
  41. Debrupa Lahiri; Ana Paula Benaduce; Francois Rouzaud; Jonathan Solomon; Anup Kumar Keshri; Lidia Kos; Arvind Agarwal. "Wear behavior and in vitro cytotoxicity of wear debris generated from hydroxyapatite-carbon nanotube composite coating". Journal of Biomedical Materials Research Part A 96A 1 (2010): 1-12. https://doi.org/10.1002%2Fjbm.a.32952.
    10.1002/jbm.a.32952
  42. Anup Kumar Keshri; Riken Patel; Arvind Agarwal. "Comprehensive process maps to synthesize high density plasma sprayed aluminum oxide composite coatings with varying carbon nanotube content". Surface and Coatings Technology 205 3 (2010): 690-702. https://doi.org/10.1016%2Fj.surfcoat.2010.07.007.
    10.1016/j.surfcoat.2010.07.007
  43. Riken R. Patel; Anup Kumar Keshri; George S. Dulikravich; Arvind Agarwal. "An experimental and computational methodology for near net shape fabrication of thin walled ceramic structures by plasma spray forming". Journal of Materials Processing Technology 210 10 (2010): 1260-1269. https://doi.org/10.1016%2Fj.jmatprotec.2010.03.012.
    10.1016/j.jmatprotec.2010.03.012
  44. Anup Kumar Keshri; Virendra Singh; Jun Huang; Sudipta Seal; Wonbong Choi; Arvind Agarwal. "Intermediate temperature tribological behavior of carbon nanotube reinforced plasma sprayed aluminum oxide coating". Surface and Coatings Technology 204 11 (2010): 1847-1855. https://doi.org/10.1016%2Fj.surfcoat.2009.11.032.
    10.1016/j.surfcoat.2009.11.032
  45. Lahiri, D.; Rouzaud, F.; Richard, T.; Keshri, A.K.; Bakshi, S.R.; Kos, L.; Agarwal, A.. "Boron nitride nanotube reinforced polylactide-polycaprolactone copolymer composite: Mechanical properties and cytocompatibility with osteoblasts and macrophages in vitro". Acta Biomaterialia 6 9 (2010): 3524-3533. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954876767&partnerID=MN8TOARS.
    10.1016/j.actbio.2010.02.044
  46. Keshri, A.K.; Huang, J.; Singh, V.; Choi, W.; Seal, S.; Agarwal, A.. "Synthesis of aluminum oxide coating with carbon nanotube reinforcement produced by chemical vapor deposition for improved fracture and wear resistance". Carbon 48 2 (2010): 431-442. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449705876&partnerID=MN8TOARS.
    10.1016/j.carbon.2009.08.046
  47. Lahiri, D.; Singh, V.; Keshri, A.K.; Seal, S.; Agarwal, A.. "Carbon nanotube toughened hydroxyapatite by spark plasma sintering: Microstructural evolution and multiscale tribological properties". Carbon 48 11 (2010): 3103-3120. http://www.scopus.com/inward/record.url?eid=2-s2.0-78649332532&partnerID=MN8TOARS.
    10.1016/j.carbon.2010.04.047
  48. Anup Kumar Keshri; Kantesh Balani; Srinivasa R. Bakshi; Virendra Singh; Tapas Laha; Sudipta Seal; Arvind Agarwal. "Structural transformations in carbon nanotubes during thermal spray processing". Surface and Coatings Technology 203 16 (2009): 2193-2201. https://doi.org/10.1016%2Fj.surfcoat.2009.02.013.
    10.1016/j.surfcoat.2009.02.013
  49. Lahiri, D.; Bakshi, S.R.; Keshri, A.K.; Liu, Y.; Agarwal, A.. "Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites". Materials Science and Engineering A 523 1-2 (2009): 263-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-68949196344&partnerID=MN8TOARS.
    10.1016/j.msea.2009.06.006
  50. Bakshi, S.R.; Keshri, A.K.; Singh, V.; Seal, S.; Agarwal, A.. "Interface in carbon nanotube reinforced aluminum silicon composites: Thermodynamic analysis and experimental verification". Journal of Alloys and Compounds 481 1-2 (2009): 207-213. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649253161&partnerID=MN8TOARS.
    10.1016/j.jallcom.2009.03.055
  51. Bakshi, S.R.; Wang, D.; Price, T.; Zhang, D.; Keshri, A.K.; Chen, Y.; McCartney, D.G.; Shipway, P.H.; Agarwal, A.. "Microstructure and wear properties of aluminum/aluminum-silicon composite coatings prepared by cold spraying". Surface and Coatings Technology 204 4 (2009): 503-510. http://www.scopus.com/inward/record.url?eid=2-s2.0-70249130867&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2009.08.018
  52. Keshri, A.K.; Bakshi, S.R.; Chen, Y.; Laha, T.; Li, X.; Levy, C.; Agarwal, A.. "Nanomechanical behaviour of plasma sprayed PZT coatings". Surface Engineering 25 4 (2009): 270-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-67149144602&partnerID=MN8TOARS.
    10.1179/026708408X375307
  53. Balani, K.; Lahiri, D.; Keshri, A.K.; Bakshi, S.R.; Tercero, J.E.; Agarwal, A.. "The nano-scratch behavior of biocompatible hydroxyapatite reinforced with aluminum oxide and carbon nanotubes". JOM 61 9 (2009): 63-66. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449372951&partnerID=MN8TOARS.
    10.1007/s11837-009-0136-1
  54. Lahiri, D.; Rouzaud, F.; Namin, S.; Keshri, A.K.; Valdés, J.J.; Kos, L.; Tsoukias, N.; Agarwal, A.. "Carbon nanotube reinforced polylactide-caprolactone copolymer: Mechanical strengthening and interaction with human osteoblasts in vitro". ACS Applied Materials and Interfaces 1 11 (2009): 2470-2476. http://www.scopus.com/inward/record.url?eid=2-s2.0-77951213989&partnerID=MN8TOARS.
    10.1021/am900423q
  55. Chen, Y.; Omar, S.; Keshri, A.K.; Balani, K.; Babu, K.; Nino, J.C.; Seal, S.; Agarwal, A.. "Ionic conductivity of plasma-sprayed nanocrystalline yttria-stabilized zirconia electrolyte for solid oxide fuel cells". Scripta Materialia 60 11 (2009): 1023-1026. http://www.scopus.com/inward/record.url?eid=2-s2.0-62849104850&partnerID=MN8TOARS.
    10.1016/j.scriptamat.2009.02.036
  56. Kantesh Balani; Sandip P. Harimkar; Anup Keshri; Yao Chen; Narendra B. Dahotre; Arvind Agarwal. "Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating". Acta Materialia 56 20 (2008): 5984-5994. https://doi.org/10.1016%2Fj.actamat.2008.08.020.
    10.1016/j.actamat.2008.08.020