???global.info.a_carregar???
Marcelo F. S. F. de Moura is Associate Professor with Habilitation at the Department of Mechanical Engineering of the Faculty of Engineering of the University of Porto, Portugal. His research interests are focused on mechanical and fracture behaviour of anisotropic materials (composites, wood and bone) and adhesive bonding. Numerical simulation of fracture and fatigue using cohesive zone modelling constitutes his prominent research topic. He is author/co-author of 177 research papers in International Scientific Journals and 3 Books, and he has participated in 31 research projects, being leader of 8 of them and supervised 12 PhD (1 ongoing).
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Marcelo Francisco de Sousa Ferreira de Moura

Nomes de citação

  • Moura, Marcelo
  • de Moura, M.F.S.F.

Identificadores de autor

Ciência ID
7E17-BCF0-D9A0
ORCID iD
0000-0002-2151-3759
Scopus Author Id
56677418700

Endereços de correio eletrónico

  • mfmoura@fe.up.pt (Profissional)

Moradas

  • Faculdade de Engenharia da Universidade do Porto. Faculdade de Engenharia da Universidade do Porto, DEMEGI, R. Dr. Roberto Frias, s/n, 4200-465, Porto, Porto, Portugal (Profissional)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Francês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Inglês Utilizador independente (B1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador independente (B1)
Espanhol; Castelhano Utilizador elementar (A1) Utilizador independente (B1) Utilizador elementar (A1) Utilizador elementar (A1)
Formação
Grau Classificação
2011
Concluído
 Engenharia Mecânica (Título de Agregado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Wood Fracture Characterization" (TESE/DISSERTAÇÃO)
 Aprovado por unanimidade
1996
Concluído
 Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
"Modelos de Previsão do Comportamento Mecânico de Materiais Compósitos de Carbono-Epóxido Sujeitos a Impacto de Baixa Velocidade e da Sua Resistência Residual à Compressão Após Impacto" (TESE/DISSERTAÇÃO)
 Aprovado com Distinção e Louvor por unanimidade.
1985
Concluído
 Engenharia Mecânica (Licenciatura)
Universidade do Porto Faculdade de Engenharia, Portugal
"N/A" (TESE/DISSERTAÇÃO)
 14
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2011/12/30 - Atual Professor Associado (Docente Universitário) Universidade do Porto Faculdade de Engenharia, Portugal
1996/04/09 - 2011/12/29 Professor Auxiliar (Docente Universitário) Universidade do Porto Faculdade de Engenharia, Portugal
1986 - 1996 Assistente (Docente Universitário) Universidade do Porto Faculdade de Engenharia, Portugal

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2011/12/30 - Atual Professor Associado com Agregação Universidade do Porto Faculdade de Engenharia, Portugal
Projetos

Projeto

Designação Financiadores
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2018/07/09 - 2021/09/30 Innovative fibrous system to stabilize comminuted bone fractures
02/SAICT/2017
02/SAICT/2017
Investigador
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 N/A
Em curso
2018/01/01 - 2020/12/31 Soluções avançadas para materiais de impacto, reparação de aeroestruturas em compósito e sua monitorização
NORTE-01-0247-FEDER-033796
Investigador
Em curso
2016/01/01 - 2019/12/31 Science and Technology for Competitive and Sustainable Industries
Project NORTE- 01-0145- FEDER-000022 – SciTech – Science and Technology for Competitive and Sustainable Industries
Investigador
Concluído
2016/09/01 - 2019/08/31 Processos híbridos baseados em fabrico aditivo de compósitos de matriz termoplástica reforçados com fibras longas ou contínuas
SAICTPAC/0036/2015 (POCI-01-0145-FEDER-016414)
Investigador
Concluído
2013/12/01 - 2015/06/06 Composite Materials, Structures and Processes
Programa Integrado Research to Innovation (RES2IN)
Investigador
Concluído
2012/04/01 - 2015/03/31 Fracture behaviour of cortical bone under mixed-mode I+II loading
info:eu-repo/grantAgreement/FCT/COMPETE/119093/PT
PTDC/EME-PME/119093/2010
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
2011/01/01 - 2013/12/31 Estudo Numérico e Experimental de Leis Coesivas em Juntas Coladas em Madeira
PDTC/EME-PME/114443/2009
Investigador
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluído
2010/04/01 - 2013/03/31 Centre of Excellence for Modern Composites Applied in Aerospace and Surface Transport Infrastructure
FP7-REGPOT-2009-1
Investigador
Concluído
2010/02/01 - 2013/01/31 Vibrações de Painéis Compósitos com Rigidez Variável
PDTC/EME-PME/098967/2008
Investigador
Associação para a Inovação e Desenvolvimento da FCT
Concluído
2007/11/01 - 2010/10/31 Repair of Aeronautical Structures
MIT/Portugal
Investigador
Concluído
2007/09/01 - 2010/08/31 Fracture behaviour of cortical bone tissue
PTDC/EME-PME/71273/2006
Investigador
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluído
2007/09/01 - 2010/08/31 Repair of wood structures using artificial composites
PTDC/EME-PME/64839/2006
Investigador responsável
Associação para a Inovação e Desenvolvimento da FCT
Concluído
2007/09/01 - 2010/08/31 Drilling of polymeric matrix composites structures
PTDC/EME-TME/66207/2006
Investigador
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluído
2006/10/01 - 2009/09/30 Fracture Mechanics Applied to the Design of Adhesively Bonded Joints
Fundação Luso-Americana para o Desenvolvimento
Investigador
Universidade do Porto Faculdade de Engenharia, Portugal
 Fundação Luso-Americana
Concluído
2006/09/01 - 2009/08/31 Multidisciplinary Research and Training on Composite Materials Applications in Transport Modes (MOMENTUM)
Human Resources and Mobility (HRM) Activity, Marie Curie Actions, Research Training Networks (RTNs)
Investigador
Universidade do Porto Faculdade de Engenharia, Portugal
Concluído
2005/09/01 - 2008/08/31 Study of Wood and Wooded Bonded Joints Behaviour under Mixed-Mode Loading
POCI/EME/56567/2004
Investigador responsável
Universidade do Porto Faculdade de Engenharia, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluído
2005/09/01 - 2008/08/31 Delamination criteria for composite materials
POCTI/EME/57956/2004
Investigador
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluído
2003/10/01 - 2006/09/30 Previsão das Propriedades a Longo Prazo de Tubagens em Plástico Reforçado com Fibra de Vidro
SAPIENS-POCTI/EME/47734/2002
Investigador
2003/09 - 2006/08 Design of Wood Bonded Joints
POCTI/EME/45573/2002
POCTI/EME/45573/2002
Investigador responsável
Universidade do Porto Faculdade de Engenharia, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluído
2002/01/01 - 2004/12/31 Interlaminar fracture toughness of composite materials
SAPIENS-POCTI/EME/38731/2001
Investigador
Cabot Family Charitable Trust
Concluído
2001/10/01 - 2004/09/30 Analysis of response and damage of polymer matrix composites to dynamic loads
SAPIENS-POCTI/EME/40048/2001
SAPIENS-POCTI/EME/40048/2001
Investigador
N/A
Concluído
1993/04/01 - 1998/06/30 Impact and Damage Tolerance and Non-Destructive Inspection of Composite Materials
EUCLID – CEPA 3 – RTP 3.1 – WP1
Investigador
Universidade do Porto Faculdade de Engenharia, Portugal
Concluído
1993/04 - 1998/06 Impact and Damage Tolerance and Non-Destructive Inspection of Composite Materials
EUCLID CEPA 3 RTP 3.1 WP1
 N/A
1993/04 - 1998/06 Impact and Damage Tolerance and Non-Destructive Inspection of Composite Materials
Project NORTE- 01-0145- FEDER-000022 SciTech Science and Technology for Competitive and Sustainable Industries
 N/A
1994/03/01 - 1997/08/31 Resistance of Polymer Composites Against Impact
BE-7227
Investigador
Universidade do Porto Faculdade de Engenharia, Portugal
Concluído
1993/02/01 - 1996/04/30 Innovative Constituents for Improving the Compressive Strenght of Long Carbon Fibres/Organic Matrix Composites
BRITE-EURAM/BREU CT-02.0314
Investigador
Concluído
Produções

Publicações

Artigo em conferência
  1. Beatriz Henriques; Pedro Ribeiro; de Moura, Marcelo F. S. F.. "Analysis of a Stiffened Laminated Composite Panel for Damage Detection". 2021.
  2. Olmos, Andrea Alexandra Rodrigues; Fertuzinhos, Aureliano Costa; Dias, Maria Isabel Ribeiro; Pereira, Fábio André Magalhães; Ferreira de Moura, Marcelo Francisco de Sousa; Zille, Andrea; Dourado, N.. "Osteosynthesis metal plate system for bone fixation using bicortical screws: numerical modelling". 2021.
    10.6084/m9.figshare.14113535
  3. Faculdade de Engenharia. "Numerical and experimental characterization of Steel - Wood doweled joints under Quasi-Static loading". Trabalho apresentado em M2D’2015, 6th International Conference on MECHANICS AND MATERIALS IN DESIGN, Ponta Delgada, 2015.
    Publicado
  4. Akhavan, H.; Ribeiro, P.; de Moura, M.F.S.F.; Faculdade de Engenharia. "Composite laminates with linearly varying fiber angles under static and dynamic loads". 2013.
    10.2514/6.2013-1565
  5. Faculdade de Engenharia. "Modelação por elementos finitos do processo de furação em laminados de carbono/epóxido". Trabalho apresentado em Encontro Nacional de Materiais e Estruturas Compósitas (ENMEC2010), Porto, 2010.
    Publicado
  6. Faculdade de Engenharia. "Estudo de Juntas Coladas de Material Compósito Sujeitas a Esforços de Fadiga em Modo I". Trabalho apresentado em Encontro Nacional de Materiais e Estruturas Compósitas (ENMEC2010), 2010.
    Publicado
  7. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Strength prediction of adhesively-bonded scarf repairs in composite structures under bending". Trabalho apresentado em Materiais 2009, Lisboa, 2009.
    Publicado • 10.4028/www.scientific.net/MSF.636-637.233
  8. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends". Trabalho apresentado em Materiais 2009, Lisboa, 2009.
    Publicado • 10.4028/www.scientific.net/MSF.636-637.1157
  9. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.. "Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II". Trabalho apresentado em Materiais 2009, Lisboa, 2009.
    Publicado • 10.4028/www.scientific.net/MSF.636-637.1518
  10. Dourado, N.; Morel, S.; De Moura, M.F.S.F.; Valentin, G.; Morais, J.. "Size effect in quasibrittle fracture: Theoretical study and CZM simulations". 2009.
  11. Faculdade de Engenharia. "Cohesive mixed-mode damage model applied to the simulation of the mechanical behaviour of a repaired sandwich beam". Trabalho apresentado em 5th International Conference on Fracture of Polymers Composites and Adhesives, Les Diablerets, 2008.
    Publicado
  12. Faculdade de Engenharia. "Aplicação de modelos coesivos para a determinação da resistência mecânica de juntas coladas". Trabalho apresentado em 5º Congresso Luso-Moçambicano de Engenharia, Maputo, 2008.
    Publicado
  13. Faculdade de Engenharia. "Repair of Composites and Sandwich Structures". Trabalho apresentado em Advanced School on Sandwich Structures (Invited Lecture), Porto, 2008.
    Publicado
  14. Faculdade de Engenharia. "Numerical Simulation of the Mechanical Behavior of a Repaired Sandwich Beam Using a Cohesive Damage Model". Lisboa, 2008.
    Publicado
  15. Faculdade de Engenharia. "Modeling overlap and scarf repairs on sandwich composite structures". Trabalho apresentado em The International Conference on Structural Analysis of Advanced Materials, Patras, 2007.
    Publicado
  16. Faculdade de Engenharia. "Drilling Process Simulation on Composite Laminates". Trabalho apresentado em ECCOMAS Thematic Conference Mechanical Response of Composites – COMPOSITES 2007, Porto, 2007.
    Publicado
  17. De Moura, M.F.S.F.; Silva, M.A.L.; Morais, J.J.L.; De Morais, A.B.; Oliveira, J.M.Q.. "Mode II fracture characterization of Plnus pinaster wood". Porto, 2007.
    Publicado
  18. Faculdade de Engenharia. "Aplicação do método dos elementos finitos à simulação da furação de compósitos laminados". Trabalho apresentado em I Jornada Luso-Brasileira de Ensino e Tecnologia em Engenharia, Porto Alegre, 2006.
    Publicado
  19. Amaro, A.M.; De Moura, M.F.M.S.; Reis, P.N.B.. "Detection of low-velocity impact damage in carbon-epoxy plates using NDT". 2006.
  20. Dourado, N.; Morel, S.; De Moura, M.F.S.F.; Valentin, G.; Morais, J.. "Fracture properties of pine and spruce in mode I". 2006.
  21. Amaro, A.M.; Reis, P.N.B.; Moura, M.F.S.F.. "Residual strength after low velocity impact in carbon-epoxy laminates". Trabalho apresentado em Materiais 2005, III International Materials Symposium | XII Portuguese Materials Society Meeting, Aveiro, 2005.
    Publicado
  22. Pereira, A.B.; De Morais, A.B.; De Moura, M.F.S.F.; Magalhães, A.G.. "Mode i interlaminar fracture of carbon/epoxy multidirectional laminates". 2005.
  23. Dávila, C.G.; Camanho, P.P.; De Moura, M.F.. "Mixed-mode decohesion elements for analyses of progressive delamination". 2001.
    10.2514/6.2001-1486
Artigo em revista
  1. Pereira, Rúben; de Moura, Marcelo; Moreira, Raúl; Correia, Nuno. "Pure (I and II) and mixed-mode (I+II) fracture characterisation of unidirectional AS4/Low-melt-PolyaryletherketoneTM polymer composites". Journal of Reinforced Plastics and Composites (2023): http://dx.doi.org/10.1177/07316844231207749.
    10.1177/07316844231207749
  2. da Silva Henriques, Beatriz; Ribeiro, Pedro; de Moura, Marcelo F.S.F.; Pullin, Rhys. "Non-linear dynamics of a stiffened composite laminated panel with debonds". Composite Structures 321 (2023): 117233. http://dx.doi.org/10.1016/j.compstruct.2023.117233.
    10.1016/j.compstruct.2023.117233
  3. Moreira, R.D.F.; de Moura, M.F.S.F.; Silva, F.G.A.. "Quasi-static and fatigue analyses of aluminium structures repaired by CFRP patch bonding". Composite Structures 322 (2023): 117372. http://dx.doi.org/10.1016/j.compstruct.2023.117372.
    10.1016/j.compstruct.2023.117372
  4. A. Majano-Majano; A.J. Lara-Bocanegra; F. Pereira; J. Xavier; J. Morais; M.F.S.F. de Moura. "Direct and inverse cohesive law identification of hardwood bonded joints with 1C-PUR adhesive using DCB test". Composite Structures (2023): https://doi.org/10.1016/j.compstruct.2023.117013.
    10.1016/j.compstruct.2023.117013
  5. Ramírez, Francis M. G.; Moreira, Raul D. F.; de Moura, Marcelo F. S. F.. "Influence of adhesive fillets on fatigue behaviour of single-strap composite repairs". Strain 59 5 (2023): http://dx.doi.org/10.1111/str.12454.
    10.1111/str.12454
  6. Ricardo J. B. Rocha; Marcelo F. S. F. de Moura; Raul D. F. Moreira. "Edgewise Compression and Three-Point Bending Analyses of Repaired Composite Sandwich Panels". Materials (2023): https://doi.org/10.3390/ma16124249.
    10.3390/ma16124249
  7. Couto, RFM; Couto, AMS; Arachchige, DDS; Nascimento, DR; Moreira, RDF; de Moura, MFSF; Vaz, MP. "Numerical analysis on the strength prediction of composite bonded repairs under different loading scenarios". Journal of Composite Materials 57 19 (2023): 3025-3043. http://dx.doi.org/10.1177/00219983231179789.
    10.1177/00219983231179789
  8. Oliveira, C.F.M.; de Moura, M.F.S.F.; Moreira, R.D.F.; Rocha, R.J.B.. "Mixed-mode I + II fracture characterisation of a honeycomb/carbon-epoxy sandwich panel using the asymmetric single-leg bending test". Theoretical and Applied Fracture Mechanics 123 (2023): 103725. http://dx.doi.org/10.1016/j.tafmec.2022.103725.
    10.1016/j.tafmec.2022.103725
  9. Campos, Teresa Daniela Azevedo; Barbosa, M. L. S.; Martins, M.; Pereira, F. A. M.; de Moura, M .F .S. F.; Quyen, Nguyen-Trong; Zille, Andrea; Dourado, N.. "On the evaluation of strain energy release rate of cement-bone bonded joints under mode II loading". (2023): https://hdl.handle.net/1822/82710.
    10.1016/j.tafmec.2023.103793
  10. Rocha, R.J.B.; de Moura, M.F.D.S.F.; Moreira, R.D.F.. "Analysis of adhesive scarf repairs on composite sandwich beams under three-point bending loading". Mechanics Based Design of Structures and Machines (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85180915057&partnerID=MN8TOARS.
    10.1080/15397734.2023.2297250
  11. José Luis Gómez-Royuela; Almudena Majano-Majano; Antonio José Lara-Bocanegra; José Xavier; M. F. S. F. de Moura. "Shear traction-separation laws of European beech under mode II loading by 3D digital image correlation". Wood Science and Technology (2022): https://doi.org/10.1007/s00226-022-01429-3.
    10.1007/s00226-022-01429-3
  12. R.D.F. Moreira; M.F.S.F. de Moura; F.G.A. Silva; J.P.A. Reina. "Mixed-mode I+II fatigue/fracture characterisation of bi-material Aluminium/CFRP bonded joints". Composites Part B: Engineering (2022): https://doi.org/10.1016/j.compositesb.2022.110240.
    10.1016/j.compositesb.2022.110240
  13. Moreira, RDF; de Moura, MFSF; Rocha, RJB; Oliveira, CFM. "Mode II fracture characterisation of a honeycomb/carbon-epoxy sandwich panel using the asymmetric end-notched flexure test". Journal of Sandwich Structures & Materials 24 7 (2022): 2030-2046. http://dx.doi.org/10.1177/10996362221118031.
    10.1177/10996362221118031
  14. Raul D. F. Moreira; Marcelo F. S. F. de Moura; Filipe G. A. Silva; Jhonny S. Rodrigues; Fernando D. R. Silva. "Fracture characterization of a bi-material bonded aluminum/CFRP joints under mixed-mode I + II loading". Fatigue & Fracture of Engineering Materials & Structures (2022): https://doi.org/10.1111/ffe.13730.
    10.1111/ffe.13730
  15. de Moura, Marcelo FSF; Moreira, Raul DF; Rocha, Ricardo JB; Oliveira, Cristiana FM. "Determination of the fracture energy under mode I loading of a honeycomb/carbon-epoxy sandwich panel using the asymmetric double cantilever beam test". Journal of Sandwich Structures & Materials 24 6 (2022): 1977-1992. http://dx.doi.org/10.1177/10996362221114906.
    10.1177/10996362221114906
  16. Bisagni, C.; Raimondo, A.; Atanasovska, I.; Milic, M.; Troian, R.; Frulla, G.; Polla, A.; et al. "Comparison of numerical analyses of a composite wing component subjected to 4-point bending". Composites Part C: Open Access 8 (2022): 100264. http://dx.doi.org/10.1016/j.jcomc.2022.100264.
    10.1016/j.jcomc.2022.100264
  17. Andrea A. R. Olmos; Aureliano Fertuzinhos; Teresa D. Campos; Isabel R. Dias; Carlos A. Viegas; Fábio A. M. Pereira; Nguy¿n T. Quy¿n; et al. "Osteosynthesis Metal Plate System for Bone Fixation Using Bicortical Screws: Numerical–Experimental Characterization". Biology (2022): https://doi.org/10.3390/biology11060940.
    10.3390/biology11060940
  18. Lopes, A.C.; Silva, E.C.; Dourado, N.; de Moura, M.F.S.F.; Sampaio, A.M.; Pontes, A.J.. "The double cantilever beam test applied to mode I fracture characterization of polyamide 12 processed by selective laser sintering technology". Engineering Fracture Mechanics 269 (2022): 108555. http://dx.doi.org/10.1016/j.engfracmech.2022.108555.
    10.1016/j.engfracmech.2022.108555
  19. Moreira, R.D.F.; de Moura, M.F.S.F.; Silva, F.G.A.; Reina, J.P.A.; Rodrigues, T.M.S.. "A simple strategy to perform mixed-mode I+II fatigue/fracture characterisation of composite bonded joints". International Journal of Fatigue 158 (2022): 106723. http://dx.doi.org/10.1016/j.ijfatigue.2022.106723.
    10.1016/j.ijfatigue.2022.106723
  20. J.L. Gómez-Royuela; A. Majano-Majano; A.J. Lara-Bocanegra; J. Xavier; M.F.S.F. de Moura. "Evaluation of R-curves and cohesive law in mode I of European beech". Theoretical and Applied Fracture Mechanics 118 (2022): 103220-103220. https://doi.org/10.1016/j.tafmec.2021.103220.
    10.1016/j.tafmec.2021.103220
  21. Natacha Rosa; Marcelo F. S. F. Moura; Susana Olhero; Ricardo Simoes; Fernão D. Magalhães; António Torres Marques; João P. S. Ferreira; et al. "Bone: An Outstanding Composite Material". Applied Sciences 12 7 (2022): 3381-3381. https://doi.org/10.3390/app12073381.
    10.3390/app12073381
  22. Sahand P. Shamchi; Marcelo F.S.F. de Moura; Zhongjie Zhao; Xiaosu Yi; Pedro M.G.P. Moreira. "Dynamic mode II interlaminar fracture toughness of electrically modified carbon/epoxy composites". International Journal of Impact Engineering (2022): https://doi.org/10.1016/j.ijimpeng.2021.104030.
    10.1016/j.ijimpeng.2021.104030
  23. Pereira, F.; Dourado, N.; Morais, J. J. L.; Moura, M. F. S. F. de. "A new method for the identification of cohesive laws under pure loading modes". (2022): https://hdl.handle.net/1822/79580.
    10.1016/j.engfracmech.2022.108594
  24. Pereira, Fábio; Morais, José; Xavier, José; Dourado, N.; de Moura, M.F.S.F.. "Experimental evaluation of cohesive laws components of mixed-mode I + II fracture characterization of cortical bone". (2022): https://hdl.handle.net/1822/79604.
    10.1016/j.engfracmech.2022.108493
  25. Gómez-Royuela, José Luis; Majano-Majano, Almudena; Lara-Bocanegra, Antonio José; Xavier, José; de Moura, M. F. S. F.. "Shear traction-separation laws of European beech under mode II loading by 3D digital image correlation". (2022): http://hdl.handle.net/10362/146004.
    https://doi.org/10.1007/s00226-022-01429-3
  26. Campos, Teresa Daniela Azevedo; Barbosa, M. L. S.; Olmos, Andrea Alexandra Rodrigues; Martins, Marcos Silva; Pereira, F. A. M.; de Moura, M. F. S. F.; Zille, Andrea; Dourado, N.. "Fracture characterisation of bone-cement bonded joints under mode I loading". (2022): https://hdl.handle.net/1822/77878.
    10.1016/j.tafmec.2022.103404
  27. Gómez-Royuela, J. L.; Majano-Majano, Almudena; Lara-Bocanegra, Antonio José; Xavier, José; de Moura, Marcelo F. S. F.. "Evaluation of R-curves and cohesive law in mode I of European beech". (2022): http://hdl.handle.net/10362/134192.
    https://doi.org/10.1016/j.tafmec.2021.103220
  28. Tania F. Freire; Tiago Quinaz; Aureliano Fertuzinhos; Nguy¿n T. Quy¿n; Marcelo F. S. M. de Moura; Marcos Martins; Andrea Zille; Nuno Dourado. "Thermal, Mechanical and Chemical Analysis of Poly(vinyl alcohol) Multifilament and Braided Yarns". Polymers 13 21 (2021): 3644-3644. https://doi.org/10.3390/polym13213644.
    10.3390/polym13213644
  29. de Moura, M.F.S.F.; Moreira, R.D.F.; Ramírez, F.M.G.. "Influence of geometric and material parameters on the mode II interlaminar fatigue/fracture characterization of CFRP laminates". Composites Science and Technology 210 (2021): 108819. http://dx.doi.org/10.1016/j.compscitech.2021.108819.
    10.1016/j.compscitech.2021.108819
  30. Ramírez, Francis M. G.; de Moura, Marcelo F. S. F.; Moreira, Raul D. F.. "Prediction of the influence of several parameters on the mode I interlaminar fatigue/fracture characterization of CFRP laminates". Mechanics of Advanced Materials and Structures 29 25 (2021): 4291-4298. http://dx.doi.org/10.1080/15376494.2021.1926018.
    10.1080/15376494.2021.1926018
  31. Ramírez, Francis M.G.; de Moura, Marcelo F.S.F.; Moreira, Raul D.F.; Silva, Filipe G.A.. "Experimental and numerical mixed-mode I + II fracture characterization of carbon fibre reinforced polymer laminates using a novel strategy". Composite Structures 263 (2021): 113683. http://dx.doi.org/10.1016/j.compstruct.2021.113683.
    10.1016/j.compstruct.2021.113683
  32. Oliveira, Jorge; Xavier, José; Pereira, Fábio; Morais, José; de Moura, Marcelo. "Direct Evaluation of Mixed Mode I+II Cohesive Laws of Wood by Coupling MMB Test with DIC". Materials 14 2 (2021): 374. http://dx.doi.org/10.3390/ma14020374.
    10.3390/ma14020374
  33. Reis, João Pedro; de Moura, Marcelo; Samborski, Sylwester. "Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review". Materials 13 24 (2020): 5832. http://dx.doi.org/10.3390/ma13245832.
    10.3390/ma13245832
  34. Rzeczkowski, Jakub; Samborski, Sylwester; de Moura, Marcelo. "Experimental Investigation of Delamination in Composite Continuous Fiber-Reinforced Plastic Laminates with Elastic Couplings". Materials 13 22 (2020): 5146. http://dx.doi.org/10.3390/ma13225146.
    10.3390/ma13225146
  35. Moreira, R.D.F.; de Moura, M.F.S.F.; Silva, F.G.A.; Ramírez, F.M.G.; Silva, F.D.R.. "Numerical comparison of several composite bonded repairs under fatigue loading". Composite Structures 243 (2020): 112250. http://dx.doi.org/10.1016/j.compstruct.2020.112250.
    Publicado • 10.1016/j.compstruct.2020.112250
  36. Moreira, R.D.F.; de Moura, M.F.S.F.; Silva, F.G.A.; Reis, J.P.. "High-cycle fatigue analysis of adhesively bonded composite scarf repairs". Composites Part B: Engineering 190 (2020): 107900. http://dx.doi.org/10.1016/j.compositesb.2020.107900.
    Publicado • 10.1016/j.compositesb.2020.107900
  37. de Moura, M.F.S.F.; Ferreira Moreira, Raul Domingos; Silva, Filipe Gonçalo Andrade Da. "A Novel Strategy to Obtain the Fracture Envelope under Mixed-Mode I+II Loading of Composite Bonded Joints". Engineering Fracture Mechanics (2020):
    Aceite para publicação
  38. de Moura, M.F.S.F.; Ramírez, F.M.G.; Ferreira Moreira, Raul Domingos; Silva, Filipe Gonçalo Andrade Da; Francis M.G. Ramírez; Marcelo F.S.F. Moura; Raul D.F. Moreira; Filipe G.A. Silva. "A Review on the Environmental Degradation Effects on Fatigue Behaviour of Adhesively Bonded Joints". Fatigue and Fracture of Engineering Materials & Structures (2020): https://doi.org/10.1111/ffe.13239.
    Aceite para publicação • 10.1111/ffe.13239
  39. Silva, F.G.A.; de Moura, M.F.S.F.; Moreira, R.D.F.. "Influence of adverse temperature and moisture conditions on the fracture behaviour of single-strap repairs of carbon-epoxy laminates". International Journal of Adhesion and Adhesives 96 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85073957337&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2019.102452
  40. Moreira, R.D.F.; de Moura, M.F.S.F.; Silva, F.G.A.. "A novel strategy to obtain the fracture envelope under mixed-mode I+II loading of composite bonded joints". Engineering Fracture Mechanics 232 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85083709169&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2020.107032
  41. de Moura, M.F.S.. "Mixed mode I¿+¿II interlaminar fracture characterization of carbon-fibre reinforced polyamide composite using the Single-Leg Bending test". Materials Today Communications (2019): http://dx.doi.org/10.1016/j.mtcomm.2019.05.006.
    10.1016/j.mtcomm.2019.05.006
  42. Pereira, F.A.M.; Dourado, N.; de Moura, M.F.S.F.. "Enhancement of stiffness and load bearing capacity of damaged mortar beams with CFRP patches". Composite Structures 210 (2019): 518-525. http://www.scopus.com/inward/record.url?eid=2-s2.0-85057483315&partnerID=MN8TOARS.
    10.1016/j.compstruct.2018.11.074
  43. Fonseca, J.; Ferreira, I.A.; de Moura, M.F.S.F.; Machado, M.; Alves, J.L.. "Study of the interlaminar fracture under mode I loading on FFF printed parts". Composite Structures 214 (2019): 316-324. http://www.scopus.com/inward/record.url?eid=2-s2.0-85061372324&partnerID=MN8TOARS.
    10.1016/j.compstruct.2019.02.005
  44. Dourado, N.; de Moura, M.F.S.F.; de Jesus, A.. "Fatigue-fracture characterization of wood under mode I loading". International Journal of Fatigue 121 (2019): 265-271. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059554827&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2018.12.012
  45. Reis, J.P.; de Moura, M.F.S.F.; Moreira, R.D.F.; Silva, F.G.A.. "Pure mode I and II interlaminar fracture characterization of carbon-fibre reinforced polyamide composite". Composites Part B: Engineering 169 (2019): 126-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064153554&partnerID=MN8TOARS.
    10.1016/j.compositesb.2019.03.069
  46. de Moura, M.F.S.F.; Silva, F.G.A.; Gonçalves, J.P.M.. "Development of an explicit three-dimensional progressive mixed-mode I+II damage model". Engineering Fracture Mechanics 218 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85070062904&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2019.106585
  47. Dourado, N.; de Moura, M.F.S.F.. "Effect of temperature on the fracture toughness of wood under mode I quasi-static loading". Construction and Building Materials 223 (2019): 863-869. http://www.scopus.com/inward/record.url?eid=2-s2.0-85068859191&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2019.07.036
  48. Moreira, R.D.F.; de Moura, M.F.S.F.; Silva, F.G.A.; Ramírez, F.M.G.; Rodrigues, J.S.; Moreira, R. D. F.; de Moura, M. F. S. F.; et al. "Mixed-mode I+II fracture characterisation of composite bonded joints". Journal of Adhesion Science and Technology (2019): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-85078611679&partnerID=MN8TOARS.
    Publicado • 10.1080/01694243.2019.1708645
  49. Dourado, N.; Pereira, F.A.M.; Lousada, J.L.; de Moura, M.F.S.F.. "Experimental and numerical analyses of wood boards joining using wood-pin connectors". Construction and Building Materials 222 (2019): 556-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-85067892969&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2019.06.179
  50. Moreira, R.D.F.; Oliveira, V.; Silva, F.G.A.; Vilar, R.; de Moura, M.F.S.F.. "Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints". International Journal of Adhesion and Adhesives 82 (2018): 108-113. http://www.scopus.com/inward/record.url?eid=2-s2.0-85041465878&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2018.01.005
  51. de Moura, M.F.S.F.; Silva, M.A.L.; Morais, J.J.L.; Dourado, N.. "Mode II fracture characterization of wood using the Four-Point End-Notched Flexure (4ENF) test". Theoretical and Applied Fracture Mechanics 98 (2018): 23-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053751171&partnerID=MN8TOARS.
    10.1016/j.tafmec.2018.09.008
  52. Pereira, F.A.M.; de Moura, M.F.S.F.; Dourado, N.; Morais, J.J.L.; Xavier, J.; Dias, M.I.R.. "Determination of mode II cohesive law of bovine cortical bone using direct and inverse methods". International Journal of Mechanical Sciences 138-139 (2018): 448-456. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042411406&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2018.02.009
  53. Dourado, N.; Silva, F.G.A.; de Moura, M.F.S.F.. "Fracture behavior of wood-steel dowel joints under quasi-static loading". Construction and Building Materials 176 (2018): 14-23. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046778539&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.04.230
  54. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Multi-impact response of composite laminates with open holes". Polymer Composites 39 7 (2018): 2490-2498. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016584653&partnerID=MN8TOARS.
    10.1002/pc.24235
  55. de Moura, M.F.S.F.; Dourado, N.. "Mode I fracture characterization of wood using the TDCB test". Theoretical and Applied Fracture Mechanics 94 (2018): 40-45. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042626955&partnerID=MN8TOARS.
    10.1016/j.tafmec.2018.01.005
  56. Reis, J.P.; de Moura, M.F.S.F.; Silva, F.G.A.; Dourado, N.. "Dimensional optimization of carbon-epoxy bars for reinforcement of wood beams". Composites Part B: Engineering 139 (2018): 163-170. http://www.scopus.com/inward/record.url?eid=2-s2.0-85037705191&partnerID=MN8TOARS.
    10.1016/j.compositesb.2017.11.046
  57. Reis, P.N.B.; Santos, R.A.M.; Silva, F.G.A.; de Moura, M.F.S.F.. "Influence of Hole Distance on Low Velocity Impact Damage". Fibers and Polymers 19 12 (2018): 2574-2580. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059753352&partnerID=MN8TOARS.
    10.1007/s12221-018-8376-8
  58. Oliveira, Vitor; Ferreira Moreira, Raul Domingos; Moura, Marcelo; Vilar, R.; Oliveira, V.; Moreira, R.D.F.; de Moura, M.F.S.F.. "Surface patterning of CRFP composites using femtosecond laser interferometry". Applied Physics A: Materials Science and Processing 124 3 (2018): http://hdl.handle.net/10400.21/8418.
    https://doi.org/10.1007/s00339-018-1662-x
  59. Moreira, R.D.F.; Oliveira, V.; Silva, F.G.A.; Vilar, R.; de Moura, M.F.S.F.; Ferreira Moreira, Raul Domingos; Oliveira, Vitor; Silva, Filipe Gonçalo Andrade Da; Moura, Marcelo. "Mode II fracture toughness of carbon–epoxy bonded joints with femtosecond laser treated surfaces". International Journal of Mechanical Sciences 148 (2018): 707-713. http://www.scopus.com/inward/record.url?eid=2-s2.0-85054027182&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2018.09.029
  60. F.G.A. Silva; M.F.S.F. de Moura; A.G. Magalhães. "Low velocity impact behaviour of a hybrid carbon-epoxy/cork laminate". Strain (2017): e12241-e12241. https://doi.org/10.1111/str.12241.
    10.1111/str.12241
  61. de Moura, M.F.S.F.; Moreira, R.D.F.. "Fatigue analysis of composite bonded repairs". Journal of Adhesion Science and Technology 31 19-20 (2017): 2164-2179. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016496091&partnerID=MN8TOARS.
    10.1080/01694243.2017.1307497
  62. de Moura, M.F.S.F.; Cavaleiro, P.M.L.C.; Silva, F.G.A.; Dourado, N.. "Mixed-mode I+II fracture characterization of a hybrid carbon-epoxy/cork laminate using the Single-Leg Bending test". Composites Science and Technology 141 (2017): 24-31. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009096944&partnerID=MN8TOARS.
    10.1016/j.compscitech.2017.01.001
  63. Oliveira, V.; Sharma, S.P.; de Moura, M.F.S.F.; Moreira, R.D.F.; Vilar, R.. "Surface treatment of CFRP composites using femtosecond laser radiation". Optics and Lasers in Engineering 94 (2017): 37-43. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014481430&partnerID=MN8TOARS.
    10.1016/j.optlaseng.2017.02.011
  64. Silva, F.G.A.; de Moura, M.F.S.F.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; Morais, J.J.L.; Dias, M.I.R.; Lourenço, P.J.; Judas, F.M.. "Fracture characterization of human cortical bone under mode II loading using the end-notched flexure test". Medical and Biological Engineering and Computing 55 8 (2017): 1249-1260. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992365091&partnerID=MN8TOARS.
    10.1007/s11517-016-1586-6
  65. Pereira, F.A.M.; de Moura, M.F.S.F.; Dourado, N.; Morais, J.J.L.; Xavier, J.; Dias, M.I.R.. "Direct and inverse methods applied to the determination of mode I cohesive law of bovine cortical bone using the DCB test". International Journal of Solids and Structures 128 (2017): 210-220. http://www.scopus.com/inward/record.url?eid=2-s2.0-85028711652&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2017.08.028
  66. Santos, R.A.M.; Reis, P.N.B.; Silva, F.G.A.; de Moura, M.F.S.F.. "Influence of inclined holes on the impact strength of CFRP composites". Composite Structures 172 (2017): 130-136. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016638099&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.03.086
  67. Moreira, R.D.F.; de Moura, M.F.S.F.; Fernandes, R.L.; Figueiredo, M.A.V.; Gonçalves, J.P.M.. "Numerical and experimental analyses of composite bonded double-strap repairs under high-cycle fatigue". Journal of Adhesion 93 12 (2017): 980-992. http://www.scopus.com/inward/record.url?eid=2-s2.0-84981710137&partnerID=MN8TOARS.
    10.1080/00218464.2016.1195736
  68. M.F.S.F. de Moura; J.P.M. Gonçalves; F.G.A. Silva. "A new energy based mixed-mode cohesive zone model". International Journal of Solids and Structures (2016):
    10.1016/j.ijsolstr.2016.10.012
  69. R.L. Fernandes; M.F.S.F. de Moura; R.D.F. Moreira. "Effect of temperature on pure modes I and II fracture behavior of composite bonded joints". Composites Part B: Engineering 96 (2016): 35-44. https://doi.org/10.1016%2Fj.compositesb.2016.04.022.
    10.1016/j.compositesb.2016.04.022
  70. M.F.S.F. de Moura; J.P.M. Gonçalves; M.V. Fernandez. "Fatigue/fracture characterization of composite bonded joints under mode I, mode II and mixed-mode I + II". Composite Structures 139 (2016): 62-67. https://doi.org/10.1016%2Fj.compstruct.2015.11.073.
    10.1016/j.compstruct.2015.11.073
  71. Pereira, F.A.M.; de Moura, M.F.S.F.; Dourado, N.; Morais, J.J.L.; Silva, F.G.A.; Dias, M.I.R.. "Bone fracture characterization under mixed-mode I + II loading using the MMB test". Engineering Fracture Mechanics 166 (2016): 151-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992046977&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2016.08.011
  72. Silva, F.G.A.; De Moura, M.F.S.F.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; Morais, J.J.L.; Dias, M.I.R.. "Mixed-mode I+II fracture characterization of human cortical bone using the Single Leg Bending test". Journal of the Mechanical Behavior of Biomedical Materials 54 (2016): 72-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943522440&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2015.09.004
  73. Fernandes, R.L.; De Moura, M.F.S.F.; Moreira, R.D.F.. "Effect of moisture on pure mode i and II fracture behaviour of composite bonded joints". International Journal of Adhesion and Adhesives 68 (2016): 30-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-84958213893&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2016.01.010
  74. Moura, Marcelo; Fernandes, R.; De Moura, M.F.S.F.; Silva, F.G.A.; Dourado, N.. "Mode II fracture characterization of a hybrid cork/carbon-epoxy laminate". Composites Part B: Engineering 112 1 (2015): 248-253. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898780181&partnerID=MN8TOARS.
    10.1016/j.compositesb.2015.02.010
  75. Dourado, N.; De Moura, M.F.S.F.; Xavier, J.; Pereira, F.A.M.. "A new procedure for mode i fracture characterization of cement-based materials". Strain 51 6 (2015): 483-491. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948586547&partnerID=MN8TOARS.
    10.1111/str.12165
  76. Moreira, R.D.F.; De Moura, M.F.S.F.; Figueiredo, M.A.V.; Fernandes, R.L.; Gonçalves, J.P.M.. "Characterisation of composite bonded single-strap repairs under fatigue loading". International Journal of Mechanical Sciences 103 (2015): 22-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-84942084154&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2015.09.001
  77. Dourado, N.; de Moura, M.F.S.F.; Morel, S.; Morais, J.. "Wood fracture characterization under mode I loading using the three-point-bending test. Experimental investigation of Picea abies L.". International Journal of Fracture 194 1 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84938963331&partnerID=MN8TOARS.
    10.1007/s10704-015-0029-y
  78. de Moura, M.F.S.F.; Gonçalves, J.P.M.. "Cohesive zone model for high-cycle fatigue of composite bonded joints under mixed-mode I+II loading". Engineering Fracture Mechanics 140 (2015): 31-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-84927747344&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2015.03.044
  79. de Morais, A.B.; Pereira, A.B.; de Moura, M.F.S.F.; Silva, F.G.A.; Dourado, N.. "Bilinear approximations to the mixed-mode I-II delamination cohesive law using an inverse method". Composite Structures 122 (2015): 361-366. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919784811&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.11.058
  80. De Moura, M.F.S.F.. "Application of cohesive zone modeling to composite bonded repairs". Journal of Adhesion 91 1-2 (2015): 71-94. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907828276&partnerID=MN8TOARS.
    10.1080/00218464.2014.901912
  81. Xavier, J.; Oliveira, M.; Morais, J.J.L.; de Moura, M.F.S.F.. "Determining mode I cohesive law of Pinus pinaster by coupling double cantilever beam test with digital image correlation". Frattura ed Integrita Strutturale 31 (2015): 13-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920455482&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.31.02
  82. Silva, F.; De Moura, M.; Dourado, N.; Xavier, J.; Pereira, F.; Morais, J.; Dias, M.; Lourenço, P.; Judas, F.. "Fracture characterization of human cortical bone under mode i loading". Journal of Biomechanical Engineering 137 12 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84946737756&partnerID=MN8TOARS.
    10.1115/1.4031846
  83. Silva, F.G.A.; De Moura, M.F.S.F.; Dourado, N.; Pereira, F.A.M.; Morais, J.J.L.; Dias, M.I.R.; Lourenço, P.J.; Judas, F.M.. "Mode I fracture characterization of human bone using the DCB test". International Journal of Structural Integrity 6 3 (2015): 355-366. http://www.scopus.com/inward/record.url?eid=2-s2.0-84931478408&partnerID=MN8TOARS.
    10.1108/IJSI-05-2014-0023
  84. Al-Kinani, R.; Najim, F.; De Moura, M.F.S.F.. "The effect of hybridization on the GFRP behavior under quasi-static penetration". Mechanics of Advanced Materials and Structures 21 2 (2014): 81-87. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890108365&partnerID=MN8TOARS.
    10.1080/15376494.2012.680672
  85. Chaves, F.J.P.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Dillard, D.A.. "Fracture characterization of bonded joints using the dual actuator load apparatus". Journal of Adhesion Science and Technology 28 5 (2014): 512-524. http://www.scopus.com/inward/record.url?eid=2-s2.0-84889885563&partnerID=MN8TOARS.
    10.1080/01694243.2013.845357
  86. De Moura, M.F.S.F.; Gonçalves, J.P.M.. "Cohesive zone model for high-cycle fatigue of adhesively bonded joints under mode i loading". International Journal of Solids and Structures 51 5 (2014): 1123-1131. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892434982&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2013.12.009
  87. Pereira, F.A.M.; de Moura, M.F.S.F.; Dourado, N.; Morais, J.J.L.; Dias, M.I.R.. "Bone fracture characterization under mixed-mode I+II loading using the single leg bending test". Biomechanics and Modeling in Mechanobiology 13 6 (2014): 1331-1339. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919427598&partnerID=MN8TOARS.
    10.1007/s10237-014-0575-7
  88. Akhavan, H.; Ribeiro, P.; de Moura, M.F.S.F.. "Damage onset on tow-placed variable stiffness composite laminates". Composite Structures 113 1 (2014): 419-428. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900853866&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.03.038
  89. Pereira, F.A.M.; De Moura, M.F.S.F.; Dourado, N.; Morais, J.J.L.; Dias, M.I.R.. "Evaluation of mode i fracture toughness of cortical bone tissue in the RL crack propagation system". Ciencia e Tecnologia dos Materiais 26 2 (2014): 96-101. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929150305&partnerID=MN8TOARS.
    10.1016/j.ctmat.2015.03.008
  90. Xavier, J.; Monteiro, P.; Morais, J.J.L.; Dourado, N.; De Moura, M.F.S.F.. "Moisture content effect on the fracture characterisation of Pinus pinaster under mode i". Journal of Materials Science 49 21 (2014): 7371-7381. http://www.scopus.com/inward/record.url?eid=2-s2.0-84906319906&partnerID=MN8TOARS.
    10.1007/s10853-014-8375-0
  91. Xavier, J.; Oliveira, M.; Monteiro, P.; Morais, J.J.L.; de Moura, M.F.S.F.. "Direct Evaluation of Cohesive Law in Mode I of Pinus pinaster by Digital Image Correlation". Experimental Mechanics 54 5 (2014): 829-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900296652&partnerID=MN8TOARS.
    10.1007/s11340-013-9838-y
  92. Silva, F.G.A.; Morais, J.J.L.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; De Moura, M.F.S.F.. "Determination of cohesive laws in wood bonded joints under mode II loading using the ENF test". International Journal of Adhesion and Adhesives 51 (2014): 54-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896510628&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.02.007
  93. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Buckling analysis of laminated composite plates submitted to compression after impact". Fibers and Polymers 15 3 (2014): 560-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899978398&partnerID=MN8TOARS.
    10.1007/s12221-014-0560-x
  94. De Moura, M.F.S.F.; Gonçalves, J.P.M.. "Development of a cohesive zone model for fatigue/fracture characterization of composite bonded joints under mode II loading". International Journal of Adhesion and Adhesives 54 (2014): 224-230. http://www.scopus.com/inward/record.url?eid=2-s2.0-84905011016&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.07.002
  95. Chaves, F.J.P.; Da Silva, L.F.M.; De Moura, M.F.S.F.; Dillard, D.A.; Esteves, V.H.C.. "Fracture mechanics tests in adhesively bonded joints: A literature review". Journal of Adhesion 90 12 (2014): 955-992. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903267311&partnerID=MN8TOARS.
    10.1080/00218464.2013.859075
  96. Xavier, J.; Oliveira, M.; Morais, J.J.L.; De Moura, M.F.S.F.. "Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation". Construction and Building Materials 71 (2014): 109-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907176070&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2014.08.021
  97. Caldeira, T.V.P.; Dourado, N.; De Jesus, A.M.P.; De Moura, M.F.S.F.; Morais, J.J.L.. "Quasi-static behavior of moment-carrying steel-wood doweled joints". Construction and Building Materials 53 (2014): 439-447. http://www.scopus.com/inward/record.url?eid=2-s2.0-84891675402&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2013.11.078
  98. Chaves, F.J.P.; de Moura, M.F.S.F.; da Silva, L.F.M.; Dillard, D.A.. "Numerical validation of a crack equivalent method for mixed-mode I+II fracture characterization of bonded joints". Engineering Fracture Mechanics 107 (2013): 38-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879419760&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2013.05.008
  99. Chousal, J.A.G.; De Moura, M.F.S.F.. "Mixed-mode I+II continuum damage model applied to fracture characterization of bonded joints". International Journal of Adhesion and Adhesives 41 (2013): 92-97. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869124052&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2012.10.014
  100. Fernández, M.V.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Marques, A.T.. "Mixed-mode i + II fatigue/fracture characterization of composite bonded joints using the Single-Leg Bending test". Composites Part A: Applied Science and Manufacturing 44 1 (2013): 63-69. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866984654&partnerID=MN8TOARS.
    10.1016/j.compositesa.2012.08.009
  101. Akhavan, H.; Ribeiro, P.; De Moura, M.F.S.F.. "Large deflection and stresses in variable stiffness composite laminates with curvilinear fibres". International Journal of Mechanical Sciences 73 (2013): 14-26. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879205849&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2013.03.013
  102. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Influence of open holes on composites delamination induced by low velocity impact loads". Composite Structures 97 (2013): 239-244. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871507470&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.09.041
  103. Amaro, A.M.; Reis, P.N.B.; De Moura, M.F.S.F.; Neto, M.A.. "Influence of multi-impacts on GFRP composites laminates". Composites Part B: Engineering 52 (2013): 93-99. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878537278&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.03.041
  104. Fernandes, R.M.R.P.; Chousal, J.A.G.; De Moura, M.F.S.F.; Xavier, J.. "Determination of cohesive laws of composite bonded joints under mode II loading". Composites Part B: Engineering 52 (2013): 269-274. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878596266&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.04.007
  105. Dias, G.F.; de Moura, M.F.S.F.; Chousal, J.A.G.; Xavier, J.. "Cohesive laws of composite bonded joints under mode I loading". Composite Structures 106 (2013): 646-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883366921&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.07.027
  106. Silva, F.G.A.; Xavier, J.; Pereira, F.A.M.; Morais, J.J.L.; Dourado, N.; Moura, M.F.S.F.. "Determination of cohesive laws in wood bonded joints under mode i loading using the DCB test". Holzforschung 67 8 (2013): 913-922. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888412206&partnerID=MN8TOARS.
    10.1515/hf-2013-0012
  107. Fernández, M.V.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Marques, A.T.. "Characterization of composite bonded joints under pure mode II fatigue loading". Composite Structures 95 (2013): 222-226. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868152902&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.07.031
  108. Dourado, N.; Pereira, F.A.M.; De Moura, M.F.S.F.; Morais, J.J.L.; Dias, M.I.R.. "Bone fracture characterization using the end notched flexure test". Materials Science and Engineering C 33 1 (2013): 405-410. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869083648&partnerID=MN8TOARS.
    10.1016/j.msec.2012.09.006
  109. Dourado, N.; Pereira, F.A.M.; de Moura, M.F.S.F.; Morais, J.J.L.. "Repairing wood beams under bending using carbon-epoxy composites". Engineering Structures 34 (2012): 342-350. http://www.scopus.com/inward/record.url?eid=2-s2.0-80155189560&partnerID=MN8TOARS.
    10.1016/j.engstruct.2011.09.001
  110. Xavier, J.; Morais, J.; Dourado, N.; De Moura, M.F.S.F.. "Measurement of mode I and mode II fracture properties of wood-bonded joints". Journal of Adhesion Science and Technology 25 20 (2012): 2881-2895. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862141074&partnerID=MN8TOARS.
    10.1163/016942411X576563
  111. Amaro, A.M.; Balbis Reis, P.N.; De Moura, M.; Santos, J.B.. "Influence of the specimen thickness on low velocity impact behavior of composites". Journal of Polymer Engineering 32 1 (2012): 53-58. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859354767&partnerID=MN8TOARS.
    10.1515/polyeng-2011-0101
  112. Pereira, F.A.M.; Morais, J.J.L.; de Moura, M.F.S.F.; Dourado, N.; Dias, M.I.R.. "Evaluation of bone cohesive laws using an inverse method applied to the DCB test". Engineering Fracture Mechanics 96 (2012): 724-736. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869497023&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2012.10.002
  113. Amaro, A.M.; Reis, P.N.B.; De Moura, M.F.S.F.; Santos, J.B.. "Damage detection on laminated composite materials using several NDT techniques". Insight: Non-Destructive Testing and Condition Monitoring 54 1 (2012): 14-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856704756&partnerID=MN8TOARS.
    10.1784/insi.2012.54.1.14
  114. Dourado, N.; De Moura, M.F.S.F.; De Morais, A.B.; Pereira, A.B.. "Bilinear approximations to the mode II delamination cohesive law using an inverse method". Mechanics of Materials 49 (2012): 42-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858714314&partnerID=MN8TOARS.
    10.1016/j.mechmat.2012.02.004
  115. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Magalhães, A.G.. "A straightforward method to obtain the cohesive laws of bonded joints under mode i loading". International Journal of Adhesion and Adhesives 39 (2012): 54-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864515868&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2012.07.008
  116. Pereira, A.B.; De Morais, A.B.; De Moura, M.F.S.F.. "Design and analysis of a new six-point edge crack torsion (6ECT) specimen for mode III interlaminar fracture characterisation". Composites Part A: Applied Science and Manufacturing 42 2 (2011): 131-139. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650241433&partnerID=MN8TOARS.
    10.1016/j.compositesa.2010.10.013
  117. Amaro, A.M.; Reis, P.N.B.; De Moura, M.F.S.F.. "Delamination effect on bending behaviour in carbon-epoxy composites". Strain 47 2 (2011): 203-208. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952584848&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2008.00520.x
  118. Fernández, M.V.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Marques, A.T.. "Composite bonded joints under mode i fatigue loading". International Journal of Adhesion and Adhesives 31 5 (2011): 280-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956156079&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.10.003
  119. Dourado, N.; De Moura, M.F.S.F.; Morais, J.. "A numerical study on the SEN-TPB test applied to mode i wood fracture characterization". International Journal of Solids and Structures 48 2 (2011): 234-242. http://www.scopus.com/inward/record.url?eid=2-s2.0-78249243854&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2010.09.020
  120. Amaro, A.M.; Reis, P.N.B.; Magalhães, A.G.; De Moura, M.F.S.F.. "The influence of the boundary conditions on low-velocity impact composite damage". Strain 47 SUPPL. 1 (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-79958844017&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2008.00534.x
  121. De Moura, M.F.S.F.; Dourado, N.; Morais, J.J.L.; Pereira, F.A.M.. "Numerical analysis of the ENF and ELS tests applied to mode II fracture characterization of cortical bone tissue". Fatigue and Fracture of Engineering Materials and Structures 34 3 (2011): 149-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951658372&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2010.01502.x
  122. Chaves, F.J.P.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Dillard, D.A.. "Numerical analysis of the dual actuator load test applied to fracture characterization of bonded joints". International Journal of Solids and Structures 48 10 (2011): 1572-1578. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952993076&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2011.02.006
  123. De Morais, A.B.; Pereira, A.B.; De Moura, M.F.S.F.. "Mode III interlaminar fracture of carbon/epoxy laminates using the Six-Point Edge Crack Torsion (6ECT)". Composites Part A: Applied Science and Manufacturing 42 11 (2011): 1793-1799. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053332416&partnerID=MN8TOARS.
    10.1016/j.compositesa.2011.08.002
  124. De Moura, M.F.S.F.; Oliveira, J.M.Q.; Morais, J.J.L.; Dourado, N.. "Mixed-mode (I + II) fracture characterization of wood bonded joints". Construction and Building Materials 25 4 (2011): 1956-1962. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650865996&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2010.11.060
  125. Pereira, F.A.M.; Morais, J.J.L.; Dourado, N.; De Moura, M.F.S.F.; Dias, M.I.R.. "Fracture characterization of bone under mode II loading using the end loaded split test". Journal of the Mechanical Behavior of Biomedical Materials 4 8 (2011): 1764-1773. http://www.scopus.com/inward/record.url?eid=2-s2.0-81255185355&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2011.05.033
  126. Morais, J.J.L.; de Moura, M.F.S.F.; Pereira, F.A.M.; Xavier, J.; Dourado, N.; Dias, M.I.R.; Azevedo, J.M.T.. "The double cantilever beam test applied to mode I fracture characterization of cortical bone tissue". Journal of the Mechanical Behavior of Biomedical Materials 3 6 (2010): 446-453. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955064860&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2010.04.001
  127. Ramantani, D.A.; Campilho, R.D.S.G.; de Moura, M.F.S.F.; Marques, A.T.. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". Journal of Sandwich Structures and Materials 12 3 (2010): 369-390. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952144546&partnerID=MN8TOARS.
    10.1177/1099636209104520
  128. Dourado, N.M.M.; De Moura, M.F.S.F.; Morais, J.J.L.; Silva, M.A.L.. "Estimate of resistance-curve in wood through the double cantilever beam test". Holzforschung 64 1 (2010): 119-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-74049095482&partnerID=MN8TOARS.
    10.1515/HF.2010.010
  129. de Moura, M.F.S.F.; Dourado, N.; Morais, J.. "Crack equivalent based method applied to wood fracture characterization using the single edge notched-three point bending test". Engineering Fracture Mechanics 77 3 (2010): 510-520. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349083905&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.10.008
  130. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures". Composites Science and Technology 70 2 (2010): 371-379. http://www.scopus.com/inward/record.url?eid=2-s2.0-73149100343&partnerID=MN8TOARS.
    10.1016/j.compscitech.2009.11.010
  131. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Barreto, A.M.J.P.; Domingues, J.J.M.S.. "Adhesively bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches". Journal of Adhesion 86 5-6 (2010): 649-670. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953648463&partnerID=MN8TOARS.
    10.1080/00218464.2010.484318
  132. Barreto, A.M.J.P.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Morais, J.J.L.; Santos, C.L.. "Repair of wood trusses loaded in tension with adhesively bonded carbon-epoxy patches". Journal of Adhesion 86 5-6 (2010): 630-648. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953640308&partnerID=MN8TOARS.
    10.1080/00218464.2010.484316
  133. Pinto, A.M.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Mendes, I.R.. "Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures". International Journal of Adhesion and Adhesives 30 5 (2010): 329-337. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955230130&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.11.001
  134. Da Silva, L.F.M.; De Magalhães, F.A.C.R.G.; Chaves, F.J.P.; De Moura, M.F.S.F.. "Mode II fracture toughness of a brittle and a ductile adhesive as a function of the adhesive thickness". Journal of Adhesion 86 9 (2010): 889-903. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956478419&partnerID=MN8TOARS.
    10.1080/00218464.2010.506155
  135. de Moura, M.F.S.F.; Oliveira, J.M.Q.; Morais, J.J.L.; Xavier, J.. "Mixed-mode I/II wood fracture characterization using the mixed-mode bending test". Engineering Fracture Mechanics 77 1 (2010): 144-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-72049124798&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.09.014
  136. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Amaro, A.M.; Reis, P.N.B.. "Interlaminar and intralaminar fracture characterization of composites under mode I loading". Composite Structures 92 1 (2010): 144-149. http://www.scopus.com/inward/record.url?eid=2-s2.0-70349439010&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.07.012
  137. Ramantani, D.A.; de Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Fracture characterization of sandwich structures interfaces under mode I loading". Composites Science and Technology 70 9 (2010): 1386-1394. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953705429&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.04.018
  138. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Barreto, A.M.J.P.; Morais, J.J.L.; Domingues, J.J.M.S.. "Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining". Construction and Building Materials 24 4 (2010): 531-537. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049085201&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2009.10.006
  139. Oliveira, J.M.Q.; De Moura, M.F.S.F.; Morais, J.J.L.. "Application of the end loaded split and single-leg bending tests to the mixed-mode fracture characterization of wood". Holzforschung 63 5 (2009): 597-602. http://www.scopus.com/inward/record.url?eid=2-s2.0-68849090969&partnerID=MN8TOARS.
    10.1515/HF.2009.088
  140. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Domingues, J.J.M.S.. "Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes". International Journal of Adhesion and Adhesives 29 2 (2009): 195-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-56249102417&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2008.03.005
  141. de Moura, M.F.S.F.; Fernandez, M.V.C.; de Morais, A.B.; Campilho, R.D.S.G.. "Numerical analysis of the Edge Crack Torsion test for mode III interlaminar fracture of composite laminates". Engineering Fracture Mechanics 76 4 (2009): 469-478. http://www.scopus.com/inward/record.url?eid=2-s2.0-60649090383&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2008.10.004
  142. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Pinto, A.M.G.; Morais, J.J.L.; Domingues, J.J.M.S.. "Modelling the tensile fracture behaviour of CFRP scarf repairs". Composites Part B: Engineering 40 2 (2009): 149-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849088376&partnerID=MN8TOARS.
    10.1016/j.compositesb.2008.10.008
  143. de Morais, A.B.; Pereira, A.B.; de Moura, M.F.S.F.; Magalhães, A.G.. "Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test". Composites Science and Technology 69 5 (2009): 670-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-59849101321&partnerID=MN8TOARS.
    10.1016/j.compscitech.2008.12.019
  144. De Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Mixed-mode cohesive damage model applied to the simulation of the mechanical behaviour of laminated composite adhesive joints". Journal of Adhesion Science and Technology 23 10-11 (2009): 1477-1491. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949872458&partnerID=MN8TOARS.
    10.1163/156856109X433036
  145. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Barreto, A.M.J.P.; Morais, J.J.L.; Domingues, J.J.M.S.. "Fracture behaviour of damaged wood beams repaired with an adhesively-bonded composite patch". Composites Part A: Applied Science and Manufacturing 40 6-7 (2009): 852-859. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349091174&partnerID=MN8TOARS.
    10.1016/j.compositesa.2009.04.007
  146. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Buckling behaviour of carbon-epoxy adhesively-bonded scarf repairs". Journal of Adhesion Science and Technology 23 10-11 (2009): 1493-1512. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949815184&partnerID=MN8TOARS.
    10.1163/156856109X433045
  147. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Tensile behaviour of three-dimensional carbon-epoxy adhesively bonded single- and double-strap repairs". International Journal of Adhesion and Adhesives 29 6 (2009): 678-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349241275&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.02.004
  148. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; de Moura, M.F.S.F.; Baptista, A.P.M.. "Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive". Journal of Adhesion 85 6 (2009): 351-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349105062&partnerID=MN8TOARS.
    10.1080/00218460902880313
  149. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Pure mode II fracture characterization of composite bonded joints". International Journal of Solids and Structures 46 6 (2009): 1589-1595. http://www.scopus.com/inward/record.url?eid=2-s2.0-59349112333&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2008.12.001
  150. Faculdade de Engenharia; Muhi, R.J.; Najim, F.; de Moura, M.F.S.F.. "The effect of hybridization on the GFRP behavior under high velocity impact". Composites Part B: Engineering 40 8 (2009): 798-803. https://repositorio-aberto.up.pt/handle/10216/91711.
    10.1016/j.compositesb.2009.08.002
  151. De Moura, M.F.S.F.; Silva, M.A.L.; Morais, J.J.L.; De Morais, A.B.; Lousada, J.J.L.; Faculdade de Engenharia. "Data reduction scheme for measuring GIIc of wood in end-notched flexure (ENF) tests". Holzforschung 63 1 (2009): 99-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-58149102466&partnerID=MN8TOARS.
    10.1515/HF.2009.022
  152. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Domingues, J.J.M.S.. "Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs". International Journal of Solids and Structures 45 5 (2008): 1497-1512. http://www.scopus.com/inward/record.url?eid=2-s2.0-38049067010&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2007.10.003
  153. Durão, L.M.P.; de Moura, M.F.S.F.; Marques, A.T.. "Numerical prediction of delamination onset in carbon/epoxy composites drilling". Engineering Fracture Mechanics 75 9 (2008): 2767-2778. http://www.scopus.com/inward/record.url?eid=2-s2.0-40649106914&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2007.03.009
  154. Guedes, R.M.; de Moura, M.F.S.F.; Ferreira, F.J.. "Failure analysis of quasi-isotropic CFRP laminates under high strain rate compression loading". Composite Structures 84 4 (2008): 362-368. http://www.scopus.com/inward/record.url?eid=2-s2.0-41549138211&partnerID=MN8TOARS.
    10.1016/j.compstruct.2007.10.001
  155. de Moura, M.F.S.F.; de Morais, A.B.. "Equivalent crack based analyses of ENF and ELS tests". Engineering Fracture Mechanics 75 9 (2008): 2584-2596. http://www.scopus.com/inward/record.url?eid=2-s2.0-40649116200&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2007.03.005
  156. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading". Composites Science and Technology 68 10-11 (2008): 2224-2230. http://www.scopus.com/inward/record.url?eid=2-s2.0-44749087315&partnerID=MN8TOARS.
    10.1016/j.compscitech.2008.04.003
  157. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.; Morais, J.J.L.. "Computational modelling of the residual strength of repaired composite laminates using a cohesive damage model". Journal of Adhesion Science and Technology 22 13 (2008): 1565-1591. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849128346&partnerID=MN8TOARS.
    10.1163/156856108X309576
  158. Dourado, N.; Morel, S.; de Moura, M.F.S.F.; Valentin, G.; Morais, J.. "Comparison of fracture properties of two wood species through cohesive crack simulations". Composites Part A: Applied Science and Manufacturing 39 2 (2008): 415-427. http://www.scopus.com/inward/record.url?eid=2-s2.0-38949209828&partnerID=MN8TOARS.
    10.1016/j.compositesa.2007.08.025
  159. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Chousal, J.A.G.; Campilho, R.D.S.G.. "Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints". International Journal of Adhesion and Adhesives 28 8 (2008): 419-426. http://www.scopus.com/inward/record.url?eid=2-s2.0-49749110781&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2008.04.004
  160. Guedes, R.M.; Sá, A.; de Moura, M.F.S.F.. "An experimental and numerical assessment of DCB tests on glass/polyester curved beams cut out from pipes". Polymer Testing 27 8 (2008): 985-994. http://www.scopus.com/inward/record.url?eid=2-s2.0-54949125888&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2008.08.011
  161. de Moura, M.F.S.F.; Morais, J.J.L.; Dourado, N.. "A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam test". Engineering Fracture Mechanics 75 13 (2008): 3852-3865. http://www.scopus.com/inward/record.url?eid=2-s2.0-44449150951&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2008.02.006
  162. Amaro, A.M.; Reis, P.N.B.; De Moura, M.F.S.F.. "The effect of the carbon epoxy plate's size under low velocity impact". Materials Science Forum 587-588 (2008): 594-598. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349121180&partnerID=MN8TOARS.
    Publicado
  163. Campilho,Raul D.S.G.; Moura,Marcelo F.S.F. de; Ramantani,Dimitra A.; Gonçalves,João P.M.. "Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method". (2008): http://www.scielo.mec.pt/scielo.php?script=sci_arttext&pid=S0870-83122008000100012.
  164. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model". Journal of Adhesion Science and Technology 21 9 (2007): 855-870. http://www.scopus.com/inward/record.url?eid=2-s2.0-34748816963&partnerID=MN8TOARS.
    10.1163/156856107781061477
  165. Oliveira, J.M.Q.; de Moura, M.F.S.F.; Silva, M.A.L.; Morais, J.J.L.. "Numerical analysis of the MMB test for mixed-mode I/II wood fracture". Composites Science and Technology 67 9 (2007): 1764-1771. http://www.scopus.com/inward/record.url?eid=2-s2.0-33947544716&partnerID=MN8TOARS.
    10.1016/j.compscitech.2006.11.007
  166. Silva, M.A.L.; Morais, J.J.L.; de Moura, M.F.S.F.; Lousada, J.L.. "Mode II wood fracture characterization using the ELS test". Engineering Fracture Mechanics 74 14 (2007): 2133-2147. http://www.scopus.com/inward/record.url?eid=2-s2.0-34047271464&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2006.10.012
  167. Amaro, A.M.; Reis, P.N.B.; Magalhães, A.G.; Moura, M.F.S.F.. "The effect of the impactor diameter and boundary conditions on low velocity impact composites behaviour". Applied Mechanics and Materials 7-8 (2007): 217-222. http://www.scopus.com/inward/record.url?eid=2-s2.0-55349128938&partnerID=MN8TOARS.
    Publicado
  168. Campilho,Raul D.S.G.; Moura,Marcelo F.S.F. de; Domingues,Joaquim J.M.S.. "Efeito da geometria na resistência residual à tracção de reparações por sobreposição simples de laminados de carbono-epóxido". (2007): http://www.scielo.mec.pt/scielo.php?script=sci_arttext&pid=S0870-83122007000200008.
  169. Durão, L.M.P.; de Moura, M.F.S.F.; Marques, A.T.. "Numerical simulation of the drilling process on carbon/epoxy composite laminates". Composites Part A: Applied Science and Manufacturing 37 9 (2006): 1325-1333. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746731075&partnerID=MN8TOARS.
    10.1016/j.compositesa.2005.08.013
  170. Silva, M.A.L.; de Moura, M.F.S.F.; Morais, J.J.L.. "Numerical analysis of the ENF test for mode II wood fracture". Composites Part A: Applied Science and Manufacturing 37 9 (2006): 1334-1344. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746520640&partnerID=MN8TOARS.
    10.1016/j.compositesa.2005.08.014
  171. de Morais, A.B.; de Moura, M.F.S.F.. "Evaluation of initiation criteria used in interlaminar fracture tests". Engineering Fracture Mechanics 73 16 (2006): 2264-2276. http://www.scopus.com/inward/record.url?eid=2-s2.0-33747181621&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2006.05.003
  172. de Moura, M.F.S.F.; Silva, M.A.L.; de Morais, A.B.; Morais, J.J.L.. "Equivalent crack based mode II fracture characterization of wood". Engineering Fracture Mechanics 73 8 (2006): 978-993. http://www.scopus.com/inward/record.url?eid=2-s2.0-32644440644&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2006.01.004
  173. da Silva, L.F.M.; Rodrigues, T.N.S.S.; Figueiredo, M.A.V.; de Moura, M.F.S.F.; Chousal, J.A.G.. "Effect of adhesive type and thickness on the lap shear strength". Journal of Adhesion 82 11 (2006): 1091-1115. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751099566&partnerID=MN8TOARS.
    10.1080/00218460600948511
  174. De Moura, M.F.S.F.; Chousal, J.A.G.. "Cohesive and continuum damage models applied to fracture characterization of bonded joints". International Journal of Mechanical Sciences 48 5 (2006): 493-503. http://www.scopus.com/inward/record.url?eid=2-s2.0-33244495311&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2005.12.008
  175. De Moura, M.F.S.F.; Daniaud, R.; Magalhães, A.G.. "Simulation of mechanical behaviour of composite bonded joints containing strip defects". International Journal of Adhesion and Adhesives 26 6 (2006): 464-473. http://www.scopus.com/inward/record.url?eid=2-s2.0-33644904663&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2005.06.010
  176. De Moura, M.F.S.F.. "Numerical simulation of the ENF test for the mode-II fracture characterization of bonded joints". Journal of Adhesion Science and Technology 20 1 (2006): 37-52. http://www.scopus.com/inward/record.url?eid=2-s2.0-33645048991&partnerID=MN8TOARS.
    10.1163/156856106775212422
  177. Magalhães, A.G.; De Moura, M.F.S.F.; Gonçalves, J.P.M.. "Evaluation of stress concentration effects in single-lap bonded joints of laminate composite materials". International Journal of Adhesion and Adhesives 25 4 (2005): 313-319. http://www.scopus.com/inward/record.url?eid=2-s2.0-13844298087&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2004.10.002
  178. de Morais, A.B.; de Moura, M.F.S.F.. "Assessment of initiation criteria used in interlaminar fracture tests of composites". Engineering Fracture Mechanics 72 17 (2005): 2615-2627. http://www.scopus.com/inward/record.url?eid=2-s2.0-23844481428&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2005.05.003
  179. Magalhães, A.G.; De Moura, M.F.S.F.. "Application of acoustic emission to study creep behaviour of composite bonded lap shear joints". NDT and E International 38 1 (2005): 45-52. http://www.scopus.com/inward/record.url?eid=2-s2.0-6344263506&partnerID=MN8TOARS.
    10.1016/j.ndteint.2004.06.005
  180. Campilho, R.R.D.S.G.; de Moura, M.M.F.S.F.; Domingues, J.J.M.S.. "Modelling single and double-lap repairs on composite materials". Composites Science and Technology 65 13 (2005): 1948-1958. http://www.scopus.com/inward/record.url?eid=2-s2.0-23144463539&partnerID=MN8TOARS.
    10.1016/j.compscitech.2005.04.007
  181. Pereira, A.B.; De Morais, A.B.; De Moura, M.F.S.F.; Magalhães, A.G.. "Mode I interlaminar fracture of woven glass/epoxy multidirectional laminates". Composites Part A: Applied Science and Manufacturing 36 8 (2005): 1119-1127. http://www.scopus.com/inward/record.url?eid=2-s2.0-18844443147&partnerID=MN8TOARS.
    10.1016/j.compositesa.2005.01.006
  182. Pinho, S.T.; Camanho, P.P.; De Moura, M.F.. "Numerical simulation of the crushing process of composite materials". International Journal of Crashworthiness 9 3 (2004): 263-276. http://www.scopus.com/inward/record.url?eid=2-s2.0-3242690049&partnerID=MN8TOARS.
    10.1533/ijcr.2004.0287
  183. de Moura, M.F.S.F.; Gonçalves, J.P.M.. "Modelling the interaction between matrix cracking and delamination in carbon-epoxy laminates under low velocity impact". Composites Science and Technology 64 7-8 (2004): 1021-1027. http://www.scopus.com/inward/record.url?eid=2-s2.0-1842634161&partnerID=MN8TOARS.
    10.1016/j.compscitech.2003.08.008
  184. de Moura, M.F.S.F.; Pereira, A.B.; de Morais, A.B.. "Influence of intralaminar cracking on the apparent interlaminar mode i fracture toughness of cross-ply laminates". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 759-766. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143098079&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00739.x
  185. De Morais, A.B.; De Moura, M.F.; Gonçalves, J.P.M.; Camanho, P.P.. "Analysis of crack propagation in double cantilever beam tests of multidirectional laminates". Mechanics of Materials 35 7 (2003): 641-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037411001&partnerID=MN8TOARS.
    10.1016/S0167-6636(02)00289-2
  186. Camanho, P.P.; Dávila, C.G.; De Moura, M.F.. "Numerical simulation of mixed-mode progressive delamination in composite materials". Journal of Composite Materials 37 16 (2003): 1415-1438. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042527223&partnerID=MN8TOARS.
    10.1177/0021998303034505
  187. Gonçalves, J.P.M.; De Moura, M.F.S.F.; Magalhães, A.G.; De Castro, P.M.S.T.. "Application of interface finite elements to three-dimensional progressive failure analysis of adhesive joints". Fatigue and Fracture of Engineering Materials and Structures 26 5 (2003): 479-486. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038528578&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2003.00653.x
  188. De Moura, M.F.S.F.; Marques, A.T.. "Prediction of low velocity impact damage in carbon-epoxy laminates". Composites - Part A: Applied Science and Manufacturing 33 3 (2002): 361-368. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036497729&partnerID=MN8TOARS.
    10.1016/S1359-835X(01)00119-1
  189. De Morais, A.B.; De Moura, M.F.; Marques, A.T.; De Castro, P.T.. "Mode-I interlaminar fracture of carbon-epoxy cross-ply composites". Composites Science and Technology 62 5 (2002): 679-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036534675&partnerID=MN8TOARS.
    10.1016/S0266-3538(01)00223-8
  190. Gonçalves, J.P.M.; De Moura, M.F.S.F.; De Castro, P.M.S.T.. "A three-dimensional finite element model for stress analysis of adhesive joints". International Journal of Adhesion and Adhesives 22 5 (2002): 357-365. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036036282&partnerID=MN8TOARS.
    10.1016/S0143-7496(02)00015-5
  191. Gonçalves, J.P.M.; De Moura, M.F.S.F.; De Castro, P.M.S.T.; Marques, A.T.. "Interface element including point-to-surface constraints for three-dimensional problems with damage propagation". Engineering Computations (Swansea, Wales) 17 1 (2000): 28-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342955781&partnerID=MN8TOARS.
  192. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Marques, A.T.; De Castro, P.M.S.T.. "Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model". Composite Structures 50 2 (2000): 151-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040952748&partnerID=MN8TOARS.
  193. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Marques, A.T.; De Castro, P.M.S.T.. "Modeling compression failure after low velocity impact on laminated composites using interface elements". Journal of Composite Materials 31 15 (1997): 1462-1479. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030688730&partnerID=MN8TOARS.
Capítulo de livro
  1. Dantas, Rita; Mohabeddine, Anis; de Moura, Marcelo; Moreira, Raul; Lesiuk, Grzegorz; Correia, José; de Jesus, Abílio. "Fracture Characterization of Hybrid Bonded Joints (CFRP/Steel) for Pure Mode I". In Structural Integrity and Fatigue Failure Analysis, 215-233. Springer International Publishing, 2022.
    10.1007/978-3-030-91847-7_21
  2. Marques, A.T.; Nóvoa, P.; Moura, M.; Arteiro, A.. "Cork-based structural composites". In Design and Manufacturing” of the "Handbook of Composite from Renewable Materials, 489-514. 2017.
    Publicado
  3. de Moura, M.F.S.F.. "Simulation of Bonded Joints Failure using Progressive Mixed-Mode Damage Models". In Advances in Modeling and Design of Adhesively Bonded Systems, 147-170. Scrivener Publishing LLC, WILEY, 2013.
    Publicado
  4. Pearson, R.A.; Blackman, B.R.K.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Dourado, N.M.M.; Adams, R.D.; Dillard, D.A.; et al. "Mode II Fracture Characterization of Bonded Joints using the ELS Test". In Testing Adhesive Joints - Best practices, 186-191. John Wiley & Sons, 2012.
    Publicado • 10.1002/9783527647026.ch3
  5. Faculdade de Engenharia. "Fracture, Interlaminar". In Encyclopedia of Composites, 155-182. New Jersey, Estados Unidos: John Wiley &Sons, 2012.
    Publicado
  6. Faculdade de Engenharia. "Matrix-controlled failure modes of polymer composite". In Encyclopedia of Composites. New Jersey, Estados Unidos: John Wiley &Sons, 2012.
    Publicado
  7. de Moura, M.F.S.F.. "Interaction of matrix cracking and delamination". In Delamination Behaviour of Composites, 327-343. Woodhead Publishing Limited, 2008.
    Publicado • 10.1533/9781845694821.3.327
  8. de Moura, M.F.S.F.. "Interlaminar mode II fracture Characterization". In Delamination Behaviour of Composites, 310-326. Woodhead Publishing Limited, 2008.
    Publicado • 10.1533/9781845694821.3.310
  9. Moura, M.F.S.F.D.. "Progressive damage modelling". In Modeling of Adhesively Bonded Joints, 155-182. Woodhead Publishing Limited, 2008.
    Publicado • 10.1007/978-3-540-79056-3_6
  10. Ferreira De Moura, M.F.S.. "Interaction of matrix cracking and delamination". 327-343. 2008.
Livro
  1. de Moura, M.F.S.F.; Dourado, N.M.M.. Wood Fracture Characterization. Boca Raton, Estados Unidos: CRC Press. 2018.
    Publicado
  2. de Moura, M.F.S.F.; da Silva, Lucas F. M.; de Magalhães, A. G.. Juntas Adesivas Estruturais. Porto, Portugal: Publindústria, Edições Técnicas. 2007.
    Publicado
  3. de Moura, M.F.S.F.; de Morais, A.B.; de Magalhães, A.G.. MATERIAIS COMPÓSITOS – Materiais, Fabrico e Comportamento Mecânico. Porto, Portugal: Publindústria, Edições Técnicas. 2006.
    Publicado
Tese / Dissertação
  1. Moura, Marcelo Francisco de Sousa Ferreira de. "Modelos de previsão do comportamento mecânico de materiais compósitos de carbonoepóxido sujeitos a impacto de baixa velocidade e da sua resistência residual à compressão após impacto". Doutoramento, 1995. http://hdl.handle.net/10216/12157.
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2020 - Atual Reparação de Compósitos de Carbono com Matriz Termoplástica
Orientador de João Pedro da Costa Reis
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2017 - 2021/12/28 Estudo do Comportamento à Fadiga de Reparações Adesivas de Estruturas de Alumínio com Compósitos de Carbono-Epóxido
Orientador de Raul Domingos Ferreira Moreira
 Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2020/05/27 Study of Cortical Bone Fracture Behaviour under Fatigue Loads
Orientador de Filipe Gonçalo Andrade da Silva
 Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2012 - 2017/04/12 Comportamento Mecânico da Madeira sob Solicitações de Modo Misto
Orientador de Jorge Marcelo Quintas de Oliveira
Engenharia Mecânica (Doutoramento)
Universidade da Beira Interior, Portugal
2011 - 2015/11/25 Identification of Cohesive Laws of Cortical Bone under Mode I, Mode II and Mixed-Mode I+II
Orientador de Fábio André Magalhães Pereira
 Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2009 - 2013/10/11 Fracture Mechanics Applied to the Design of Adhesively Bonded Joints
Coorientador de Filipe José Palhares Chaves
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2009 - 2013/07/23 Fracture Characterization of Composite Bonded Joints under Fatigue Loading
Orientador de Maria Victoria Castro Fernandez
 Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2008 - 2012/07/16 Fracture Characterization of Sandwich Structures under Pure (I and II) and Mixed-Mode (I+II) loading and its Application to Sandwich Bonded Repair
Orientador de Dimitra Ramantani
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2005 - 2009/06/25 Repair of Composite and Wood Structures
Orientador de Raul Duarte Salgueiral Campilho
Engenharia Mecânica
Universidade do Porto Faculdade de Engenharia, Portugal
2003 - 2008/12/18 R-Curve Behaviour and Size Effect of a Quasibrittle Material: Wood
Orientador de Nuno Miguel Magalhães Dourado
Engenharia Mecânica (Doutoramento)
Universidade de Trás-os-Montes e Alto Douro, Portugal
1996 - 2000/05/31 Contribuições para a Análise Numérica e Experimental do Comportamento de Juntas de Sobreposição Simples
Coorientador de João Paulo Moreira Gonçalves
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
Distinções

Prémio

2021 Prémio de Reconhecimento Científico FEUP 2019
Universidade do Porto Faculdade de Engenharia, Portugal
2020 Prémio de Reconhecimento Científico FEUP 2018
Universidade do Porto Faculdade de Engenharia, Portugal
2019 Prémio de Reconhecimento Científico FEUP 2017
Universidade do Porto Faculdade de Engenharia, Portugal
2018 Prémio de Reconhecimento Científico FEUP 2016
Universidade do Porto Faculdade de Engenharia, Portugal
2017 Diploma de Reconhecimento Científico FEUP 2015
Universidade do Porto Faculdade de Engenharia, Portugal
2016 Prémio de Excelência Científica 2014
Universidade do Porto Faculdade de Engenharia, Portugal
2016 Diploma de Reconhecimento Científico FEUP 2014
Universidade do Porto Faculdade de Engenharia, Portugal
2013 Diploma de Reconhecimento Científico FEUP 2013
Universidade do Porto Faculdade de Engenharia, Portugal
2012 Diploma de Incentivo Científico FEUP 2012
2011 Diploma de Incentivo Científico FEUP 2011
Universidade do Porto Faculdade de Engenharia, Portugal
2010 Prémio de Reconhecimento Científico 2010
Universidade do Porto Faculdade de Engenharia, Portugal
2009 Desafio RCAAP (Repositório Científico de Acesso Aberto de Portugal)
Fundacao para a Computacao Cientifica Nacional, Portugal
2009 Prémio de Excelência Científica 2009
Universidade do Porto Faculdade de Engenharia, Portugal
2008 Prémio de incentivo científico 2008
Universidade do Porto Faculdade de Engenharia, Portugal

Outra distinção

2016 Certificate of Outstanding Contribution in Reviewing - Engineering Fracture Mechanics
Elsevier BV, Países Baixos
2015 Certificate of Outstanding Contribution in Reviewing
Elsevier BV, Países Baixos