???global.info.a_carregar???
Rui Miguel Barreiros Ruben has a BS.C (5 years), a BS.C and also a Ph.D degree in Mechanical Engineering, all three in Instituto Superior Técnico. Rui Ruben is Professor at Polytechnic of Leiria since 2001, where he has been responsible for several disciplines on Computational Mechanics and Biomechanics. Rui also has 1 Ph.D supervision already concluded, in Biomedical Engineering. It is a partnership between the University of Lisbon and the University of Ghent. Nowadays, Rui has 2 more Ph.D students. Rui B. Ruben was the first coordinator of the BS.c. degree in Biomechanics in 2005/06. Rui B. Ruben was Mechanical Engineering Department director from 2014 to 2016. Nowadays he is also member of Ethical Committee of Polytechnic of Leiria. He is member of Centre for Rapid and Sustainable Product Development (CDRsp) and contributing member of Laboratório Associado de Energia, Transportes e Aeronáutica (LAETA). His main research areas are Biomechanics, leading two projects: Software development for arthroplasty preparation (concluded) and Design and manufacturing of tracheal stents (on going). He also is part of other projects as team member. Rui Ruben has 22 documents in Scopus (h-index 9).
Identificação

Identificação pessoal

Nome completo
RUI MIGUEL BARREIROS RÚBEN

Nomes de citação

  • Ruben, Rui B.

Identificadores de autor

Ciência ID
0A14-A279-7C05
ORCID iD
0000-0002-5407-0579

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Inglês Utilizador independente (B2) Utilizador proficiente (C1) Utilizador independente (B1) Utilizador independente (B2) Utilizador independente (B2)
Formação
Grau Classificação
2009/01/09
Concluído
PhD in Mechanical Engineering (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Optimal Design of Hip Prostheses" (TESE/DISSERTAÇÃO)
approved by unanimity
2003/05/14
Concluído
Master in Mechanical Engineering (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Shape optimization of hip prostheses" (TESE/DISSERTAÇÃO)
approved by unanimity
1994/09 - 1999
Concluído
Mechanical Engineering (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
15
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2023/07 - Atual Professor Coordenador (Docente Ensino Superior Politécnico) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2009/02/01 - 2023/06 Professor Adjunto (Docente Ensino Superior Politécnico) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019/02/01 - 2019/06/30 Professor Auxiliar Convidado (Docente Universitário) Universidade de Coimbra, Portugal
2016 - 2019 Professor Adjunto (Docente Ensino Superior Politécnico) Instituto Politécnico de Leiria, Portugal
2013 - 2016 Professor Adjunto (Docente Ensino Superior Politécnico) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2001/09/01 - 2009/04/30 Assistente (Docente Ensino Superior Politécnico) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Cargos e Funções

Categoria Profissional
Instituição de acolhimento
Empregador
2024/01/10 - Atual Director de Unidade Orgânica Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2018 - Atual Coordinator of Biomechanics Bachelor degree Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017/07 - 2023/02 Member of Ethics Commission Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015/07 - 2021/11 Scientific and Technical Council Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015 - 2021 Member of Scientific and Technical Council Instituto Politécnico de Leiria, Portugal
2014 - 2016 Head of Mechanical Engineering Department Instituto Politécnico de Leiria, Portugal
2009 - 2012 Coordinator of Biomechanics Bachelor degree Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2004 - 2010 Member of Pedagogic Council Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2005 - 2007 Coordinator of Biomechanics Bachelor degree Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Projetos

Projeto

Designação Financiadores
2022/12/31 - 2025 EFEU: Emission Free European Universities
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria, Portugal
Erasmus Plus
Em curso
2021/01/01 - 2023/12/31 Advanced Production and Intelligent Systems
LA/P/0112/2020
Investigador
Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/01/01 - 2023/12/31 Centre for Rapid and Sustainable Product Development
UIDB/04044/2020
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/07/01 - 2023/06/30 SaFe – Development and Manufacturing of Tracheal Stents
Projeto 31/SI/2017
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Agência Nacional de Inovação SA
Concluído
2018/10/20 - 2022/10/19 Development of "in vivo" experimental techniques and modeling methodologies for the evaluation of 4D scaffolds on bone defect in sheep model: an integrative research approach.
PTDC/CVT-CVT/31146/2017
Investigador
Instituto Politécnico de Leiria, Portugal

Universidade de Lisboa Faculdade de Motricidade Humana, Portugal

Universidade do Porto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2020 - 2021 Design of Cold Formed Steel Element with Omega-type Section for Secondary Frame Panels
Coberfer
Investigador
Concluído
2016/01/13 - 2020/10/12 Soft and Stretchable Mechatronics for Wearable Devices: Fabrication, Implementation and Applications
CMUP-ERI/TIC/0021/2014
Investigador
Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra, Portugal

Universidade de Coimbra Instituto de Sistemas e Robótica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Centre for Rapid and Sustainable Product Development
UID/Multi/04044/2019
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019 - 2019 Table hospital FisioStation
FisioStation
Investigador responsável
Concluído
2016 - 2016 Bending performance of cold formed omega beams (XBEAM)
Perfitec
Investigador
Concluído
2016 - 2016 Ultralight fire extinguisher
MR Martins e Reis
Investigador responsável
Concluído
2016 - 2016 PVC pallet
Tucab
Investigador
Concluído
2014 - 2014 Development of a trochanteric plate for oblique fractures of the hip
University of Coimbra
Investigador responsável
2010/04/01 - 2013/09/30 Development of Scaffolds with Controlled Microstructure for Bone Tissue Engineering
PTDC/EME-PME/104498/2008
Instituto de Engenharia Mecânica, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/04/01 - 2013/09/30 Software development for arthroplasty preparation
PTDC/SAU-BEB/103408/2008
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/01/01 - 2012/12/31 Projecto Estratégico - LA 22 - 2011-2012
PEst-OE/EME/LA0022/2011
Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 4044 - 2011-2012
PEst-OE/EME/UI4044/2011
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/05/01 - 2010/10/31 Computational Modelling of Bone Structure - Application to Bone Tissue Engineering
PTDC/EME-PME/71436/2006
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2005/10/01 - 2008/06/30 OPTIMISATION AND RAPID FABRICATION OF ENGINEERING SCAFFOLDS FOR BONE INGROWTH
POCI/SAU-BMA/60287/2004
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Universidade de Aveiro, Portugal

Universidade de Évora, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Évora, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2006 - 2007 New Solutions to Guardrails Coating
Cabopol
Investigador
Cabopol Polymer Compounds SA, Portugal
Produções

Publicações

Artigo em conferência
  1. Ruben, Rui B.; Coelho, L.; Vieira, Judite; Marcelo Calvete Gaspar. "Developing Sustainability Competencies in Engineering and Management Students: A Strategic Approach". Trabalho apresentado em ICSR 2023, Bucareste, 2023.
    Publicado
  2. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Carvalho, Marta; Correia, Mário S.; Almeida, Henrique; A. Campos, Carlos; Cordeiro, Helder; Feijó, Salvato. "Materials simplification in tracheo-stent analysis". Trabalho apresentado em CMBBE2023 - 18th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Paris, 2023.
    Aceite para publicação
  3. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Carvalho, Marta S.; Almeida, Henrique; Correia, Mário S.; A. Campos, Carlos. "Simplificação da definição dos materiais na análise do implante traqueobrônquico". Trabalho apresentado em CNB2023 - X Congresso da Sociedade Portuguesa de Biomecânica, Figueira da Foz, 2023.
    Aceite para publicação
  4. Prola, Luis; Gala, Pedro Emanuel Alves Flores de Oliveira; Ruben, Rui B.; Cristiano Monteiro; Simões, Ana. "Effective Modulus Method (EMM) concept applied to thin-walled steel beams affected by local-distortional interaction". Trabalho apresentado em XIV Congresso de Construção Metálica e Mista, Coimbra, 2023.
    Publicado
  5. Prola, Luis; Gala, Pedro Emanuel Alves Flores de Oliveira; Ruben, Rui B.; Cristiano Monteiro; Simões, Ana. "Effective Modulus Method (EMM) concept applied to thin-walled steel members". Trabalho apresentado em 10th Eurosteel Conference, Amesterdão, 2023.
    Publicado
  6. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Almeida, Henrique; Correia, Mário S.; A. Campos, Carlos. "Automatic hexaedral mesh generation of a trachea with a stent". Trabalho apresentado em CMN2022 - Congress on Numerical Methods in Engineering, Las Palmas, 2022.
    Aceite para publicação
  7. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Almeida, Henrique; Correia, Mário S.; A. Campos, Carlos. "Tracheobronchial materials computation definition". Trabalho apresentado em ESB2022 - 27th Congress of the European Society of Biomechanics, Porto, 2022.
    Aceite para publicação
  8. Dinis, Jairson C.; João Brites Pinto; Correia, Mário S.; Henrique Almeida; Carlos A. Campos; Ruben, Rui B.. "TRACHEOBRONCHIAL STENTS PERFORMANCE ANALYSIS". Trabalho apresentado em International Conference on Computational Bioengineering, Lisboa, 2022.
    Publicado
  9. Ferreira de Almeida, Diogo; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.; Benedict Verhegghe; Matthieu De Beule. "From CT-scan to finite element analysis for a patient specific hip arthroplasty". Trabalho apresentado em 8th World Congress of Biomechanics (WCB 2018), Dublin, 2018.
    Publicado
  10. Pinheiro, Júlia; Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Mechanical Properties Assessment for TPMS Based Scaffolds Using Homogenization Methods". Trabalho apresentado em 6th European Conference on Computational Mechanics (ECCM 6), Glasgow, 2018.
    Publicado
  11. Diogo F. Almeida; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.; Benedict Verhegghe; Matthieu De Beule. "Hexahedral Finite Element Mesh Generation for Total Hip Arthroplasty". Trabalho apresentado em 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Publicado
  12. Prola, Luis; Carvalho, C. F.G.J.; Pereira, João P. V.; Ruben, Rui B.. "Estudos do Comportamento à Flexão de Vigas de Perfis de Aço Enformado a Frio Tipo Omega - XBeam". Trabalho apresentado em XI Congresso de Construção Metálica e Mista, Coimbra, 2017.
    Publicado
  13. Diogo Almeida; Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; João Gamelas; Benedict Verhegghe; Matthieu De Beule. "Automated femoral landmark extraction for implant placement in hip arthroplasty". Trabalho apresentado em 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, 2016.
    Publicado
  14. Cruz, Pedro; Vaz, Daniela C.; Ruben, Rui B.; Avelelas, Francisco; Silva, Susana; Campos, Maria. "Chemical characterization of fungal chitosan for industrial applications". 2016.
    10.1186/s12913-016-1423-5
  15. Dinis, J.C.; Kemmoku, D.T.; Noritomi, P.Y.; Silva, J.V.L.; Ruben, R.B.. "Comparative analysis of mandibular symphysis plates". 2014.
  16. Ferreira de Almeida, Diogo; Folgado, João; Fernandes, Paulo R.; Ruben, Rui. "3D shape prior active contours for an automatic segmentation of a patient specific femur from a CT scan". Trabalho apresentado em 4th Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VIPIMAGE 2013, 2013.
    Publicado
  17. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "Histogram based threshold segmentation of the human femur body for patient specific acquired CT scan images". 2012.
  18. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "Development of an automated procedure for a patient specific segmentation of the human femur body from CT scan images". 2012.
  19. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. "Optimum Design of Cementless Hip Prostheses Considering Stem Alignment Effect on Long-Term Performance". Trabalho apresentado em IV European Conference on Computational Mechanics (ECCM 2010), Paris, 2010.
    Publicado
  20. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "The Effect of Varus and Valgus Alignment on Hip Stem Long-Term Performance". Trabalho apresentado em 17th Congress of the European Society of Biomechanics (ESB 2010), Edimburgo, 2010.
    Publicado
  21. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. "Shape Optimization of Cemented Hip Implants". Trabalho apresentado em 2nd International Conference on Engineering Optimization (EngOpt2010), Lisbon, 2010.
    Publicado
  22. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimum Design of Uncemented Hip Implants". Trabalho apresentado em 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisbon, 2009.
    Publicado
  23. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimização Geométrica da Prótese da Anca para Maximizar a Estabilidade Inicial e o Desempenho a Longo Prazo". Trabalho apresentado em Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, 2009.
    Publicado
  24. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Análise de próteses não cimentadas: Estabilidade inicial e remodelação óssea". Trabalho apresentado em Métodos Numéricos e Computacionais em Engenharia- CMNE/CILAMCE2007, Porto, 2007.
    Publicado
  25. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Hip prosthesis design for optimal stability and a minimum of bone remodeling". Trabalho apresentado em ICCB2007 - III International Congress on Computational Bioengineering, Isla Margarita, 2007.
  26. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Rodrigues, Helder. "Hip Prosthesis Design Using a Multi-Criteria Formulation". Trabalho apresentado em III European Conference on Computational Mechanics ¿ Solids, Structures and Coupled Problems in Engineering (ECCM2006), 2006.
    Publicado
  27. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "A Three-Dimensional Model for Shape Optimization of Hip Prostheses Using a Multi-Criteria Formulation". Trabalho apresentado em Sixth World Congress on Structural and Multidisciplinary Optimization (WCSMO-6), Rio Janeiro, 2005.
    Publicado
  28. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimização Multi-objectivo da Geometria de Próteses da Articulação da Anca". Trabalho apresentado em Congreso de Métodos Numéricos en Ingeniería 2005, Granada, 2005.
    Publicado
  29. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Rodrigues, Helder. "A 3D Multi-criteria optimization model for hip prosthesis design". Trabalho apresentado em ICCB2005 - II International Conference on Computational Bioengineering, Lisboa, 2005.
    Publicado
  30. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "A 3D Model for Uncemented Hip Prosthesis Design". Trabalho apresentado em 2nd International Conference on Advance Research in Virtual and Rapid Prototyping (VRAP2005), Leiria, 2005.
  31. Matias, João; Ruben, Rui B.; Bartolo, Paulo. "Modelação do Processo Directo e Inverso em Estereolitografia". Trabalho apresentado em SEMNI/APMTAC, 2005.
    Publicado
  32. Fernandas, P.R.; Ruben, R.B.. "Shape optimization of a cementless hip stem". 2003.
  33. Fernandes, Paulo R.; Ruben, Rui B.. "A computational procedure to optimize the shape of a cementless hip stem". Trabalho apresentado em 13th Conference of the European Society of Biomechanics, Wroclaw, 2002.
    Publicado
Artigo em revista
  1. Prola, Luis; Gala, P.; Ruben, Rui B.; Simões, A.. "Effective Modulus Method (EMM) concept applied to thin-walled steel columns.". ce/papers 6 3-4 (2023): 1893-1898. http://dx.doi.org/10.1002/cepa.2488.
    10.1002/cepa.2488
  2. Ruben, Rui B.; Simões Correia, Mário António. "Evaluation of the effect of the building position on the mechanical behaviour of components produced by additive manufacturing - material extrusion". Revista Mecânica Experimental, APAET 36 75 (2023): http://www-ext.lnec.pt/APAET/paginas/Revista/revista.html.
    Publicado
  3. Jud, Leonor; Castro, André P. G.; Ruben, Rui B.; Feijóo, Bernardo; Ribeiro, Filomena J.; Fernandes, Paulo R.. "3D Modeling of the Crystalline Lens Complex under Pseudoexfoliation". Bioengineering 9 5 (2022): 212. http://dx.doi.org/10.3390/bioengineering9050212.
    10.3390/bioengineering9050212
  4. Tiago Pires; Jorge Santos; Rui B. Ruben; Bárbara P. Gouveia; André P.G. Castro; Paulo R. Fernandes. "Numerical-experimental analysis of the permeability-porosity relationship in triply periodic minimal surfaces scaffolds". Journal of Biomechanics 117 (2021): 110263-110263. https://doi.org/10.1016/j.jbiomech.2021.110263.
    10.1016/j.jbiomech.2021.110263
  5. Amorim, Paulo H. J.; Moraes, Thiago F.; Silva, Jorge V. L.; Pedrini, Helio; Ruben, Rui B.; Silva, Jorge V.L.. "Reconstruction of Panoramic Dental Images Through Bézier Function Optimization". Frontiers in Bioengineering and Biotechnology 8 (2020): http://dx.doi.org/10.3389/fbioe.2020.00794.
    10.3389/fbioe.2020.00794
  6. V Infante; JFA Madeira; Rui B Ruben; F Moleiro; Sofia Teixeira de Freitas; Infante, Virginia; Madeira, JFA; et al. "Characterization and optimization of hybrid carbon–glass epoxy composites under combined loading". Journal of Composite Materials (2019): 002199831983467-002199831983467. https://doi.org/10.1177/0021998319834673.
    10.1177/0021998319834673
  7. A. P. G. Castro; R. B. Ruben; S. B. Gonçalves; J. Pinheiro; J. M. Guedes; P. R. Fernandes. "Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering". Computer Methods in Biomechanics and Biomedical Engineering (2019): 1-7. https://doi.org/10.1080/10255842.2019.1569638.
    10.1080/10255842.2019.1569638
  8. Henrique A Almeida; Rui B Ruben. "Medical devices: from design to production". Advances in Mechanical Engineering 9 9 (2017): 168781401772989-168781401772989. https://doi.org/10.1177%2F1687814017729895.
    10.1177/1687814017729895
  9. Dinis, J.C.; Moraes, T.F.; Amorim, P.H.J.; Amorim, O.H.J.; Silva, J.V.L.; Ruben, Rui B.. "An open-source GUI application for segment foetal ultrasound images". International Journal of Signal and Imaging Systems Engineering 10 5 (2017): 271. http://dx.doi.org/10.1504/ijsise.2017.087770.
    10.1504/ijsise.2017.087770
  10. Diogo F. Almeida; Rui B. Ruben; João Folgado; Paulo R. Fernandes; Emmanuel Audenaert; Benedict Verhegghe; Matthieu De Beule. "Fully automatic segmentation of femurs with medullary canal definition in high and in low resolution CT scans". Medical Engineering & Physics 38 12 (2016): 1474-1480. https://doi.org/10.1016%2Fj.medengphy.2016.09.019.
    10.1016/j.medengphy.2016.09.019
  11. de Almeida DF; Ruben RB; Folgado J; Fernandes PR; Gamelas J; Verhegghe B; De Beule M. "Automated femoral landmark extraction for optimal prosthesis placement in total hip arthroplasty.". International journal for numerical methods in biomedical engineering (2016): http://europepmc.org/abstract/med/27781402.
    10.1002/cnm.2844
  12. Ruben, Rui. "Proceedings of the 3rd IPLeiria's International Health Congress : Leiria, Portugal. 6-7 May 2016.". BMC health services research (2016): http://europepmc.org/abstract/med/27409075.
    10.1186/s12913-016-1423-5
  13. Dinis, J.C.; Morais, T.F.; Amorim, P.H.J.; Ruben, R.B.; Almeida, H.A.; Inforçati, P.N.; Bártolo, P.J.; Silva, J.V.L.. "Open Source Software for the Automatic Design of Scaffold Structures for Tissue Engineering Applications". Procedia Technology 16 (2014): 1542-1547. http://dx.doi.org/10.1016/j.protcy.2014.10.176.
    10.1016/j.protcy.2014.10.176
  14. Almeida, Diogo; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "DEVELOPMENT OF AN AUTOMATED PROCEDURE FOR A PATIENT SPECIFIC SEGMENTATION OF THE FEMUR BODY". Journal of Biomechanics 45 (2012): S458. http://dx.doi.org/10.1016/s0021-9290(12)70459-1.
    10.1016/s0021-9290(12)70459-1
  15. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Madeira, J.F.A.. "OPTIMUM DESIGN OF CEMENTED HIP PROSTHESES". Journal of Biomechanics 45 (2012): S272. http://dx.doi.org/10.1016/s0021-9290(12)70273-7.
    10.1016/s0021-9290(12)70273-7
  16. Ruben, R.B.; Fernandes, P.R.; Folgado, J.. "On the optimal shape of hip implants". Journal of Biomechanics 45 2 (2012): 239-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-84455205555&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2011.10.038
  17. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "STEM GEOMETRY DESIGN TO OPTIMIZE THE STABILITY AND THE STRESS SHIELDING EFFECT AFTER A THA". Journal of Biomechanics 41 (2008): S67. http://dx.doi.org/10.1016/s0021-9290(08)70067-8.
    10.1016/s0021-9290(08)70067-8
  18. Ruben, R.B.; Folgado, J.; Fernandes, P.R.. "Three-dimensional shape optimization of hip prostheses using a multicriteria formulation". Structural and Multidisciplinary Optimization 34 3 (2007): 261-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547518851&partnerID=MN8TOARS.
    10.1007/s00158-006-0072-4
  19. Ruben, R.B.; Folgado, J.; Fernandes, P.R.. "Shape optimization of uncemented hip prostheses". Virtual and Physical Prototyping 1 3 (2006): 147-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956323731&partnerID=MN8TOARS.
    10.1080/17452750600942285
  20. Fernandes, P.R.; Folgado, J.; Ruben, R.B.. "Shape optimization of a cementless hip stem for a minimum of interface stress and displacement". Computer Methods in Biomechanics and Biomedical Engineering 7 1 (2004): 51-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-4544227014&partnerID=MN8TOARS.
    10.1080/10255840410001661637
Capítulo de livro
  1. Ruben, Rui B.; Dinis, Jairson; João Brites Pinto; Carlos A. Campos; Mário S. Correia; Henrique Almeida. "Tracheal Automatic Hexahedral Mesh Generation". In Proceedings of the 10th Congress of the Portuguese Society of Biomechanics. Springer, 2024.
    Publicado
  2. Ruben, Rui B.; MIRANDA-OLIVEIRA, PAULO; FLÁVIA COSTA; Diogo Correia; Milena Vieira; Orlando Fernandes. Autor correspondente: MIRANDA-OLIVEIRA, PAULO. "Influence of the gender in the javelin throw, in athletics' high-level athletes". In Proceedings of the 10th Congress of the Portuguese Society of Biomechanics. Springer, 2024.
    Publicado
  3. Ruben, Rui B.; ricardo batista; a moreira; p mesquita. "Deformation of retaining screws on implants: Preliminary study using microCT". In Advances and Current Trends in Biomechanics. CRC press, 2021.
    Publicado
  4. Miranda-Oliveira, P.; Correia, D.; Vieira, M.M.; Ruben, R.B.; Fernandes, O.. "Influence of the gender in the rotational shot-put, in Athletics' elite athletes". In Advances and Current Trends in Biomechanics, 139-143. CRC Press, 2021.
    10.1201/9781003217152-32
  5. Almeida, Henrique A.; Vasco, Joel; Correia, Mário; Ruben, Rui. "Layer Thickness Evaluation Between Medical Imaging and Additive Manufacturing". In Lecture Notes in Computational Vision and Biomechanics, 693-701. Springer International Publishing, 2019.
    10.1007/978-3-030-32040-9_71
  6. Ruben, Rui; Fernandes, Paulo R.; Folgado, João. "Bone Implant Design Using Optimization Methods". In Biomechanics of Hard Tissues: Modelling-Testing-Materials, 263-295. Wiley, 2008.
    Publicado
Edição de livro
  1. Fernandes, Paulo R.; Bártolo, Paulo; Folgado, João; Ruben, Rui B.; Almeida, Henrique. ICTE 2015, IV International Conference on Tissue Engineering ¿ Book of Abstracts. 2015.
  2. Ruben, Rui B.; Vieira, Milena; Campos, Carlos; Almeida, Henrique A.; Siopa, Jorge; Bártolo, Paulo; Folgado, João. Actas do 6º Congresso Nacional de Biomecânica / Proceedings of the 6th Portuguese Congress on Biomechanics. 2015.
  3. Bártolo, Paulo J.; Fernandes, Paulo R.; Ruben, Rui B.; Folgado, J.; Almeida, H.; Alves, N.; Mendes, A.. Proceeding of ICTE2009, International Conference on Tissue Engineering. Lisbon, Portugal: IST Press. 2009.
Livro
  1. Ruben, Rui B.. Autor correspondente: Ruben, Rui B.. Progress in Digital and Physical Manufacturing. Springer International Publishing. 2023.
    10.1007/978-3-031-33890-8
  2. Capela, Carlos; Correia, Mário Simões; Ruben, Rui. Proceedings of CNB 2015. Politécnico de Leiria - Escola Superior de Tecnologia e Gestão. 2020.
    https://doi.org/10.25766/vnbn-a964
  3. Ruben, Rui B.; Correia, Mário; CAPELA, CARLOS. Autor correspondente: Ruben, Rui B.. Proceedings Book of 12th Portuguese Congress on Experimental Mechanics, CNME2020. Leiria, Portugal: ESTG. 2020.
    Publicado • Editor
  4. Almeida, Henrique; Vasco, Joel; Marto, Anabela; Capela, Carlos; Freitas, Dino; Craveiro, Flávio; Bártolo, Helena; et al. International Conference on Progress in Digital and Physical Manufacturing ProDPM'19 - Book of Abstracts. Instituto Politécnico de Leiria. 2019.
    https://doi.org/10.25766/2SGV-K049
  5. Fernandes, Paulo R; Tavares, João Manuel R. S.; Folgado, João; Quental, Carlos; Ruben, Rui. Book of Abstracts 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization. IDMEC - Instituto de Engenharia Mecânica. 2018.
  6. Almeida, Henrique; Paulo Rui Alves Fernandes; H. C. Rodrigues; Folgado, João; Ruben, Rui B.. ICTE 2011 – II INTERNATIONAL CONFERENCE ON TISSUE ENGINEERING. Lisboa, Portugal: IST-press. 2011.
    Publicado • Editor
  7. Fernandes, P.R.; Ruben, R.B.; Folgado, J.; Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. Autor correspondente: Ruben, Rui B.. Bone Implant Design Using Optimization Methods. Wiley. 2010.
    10.1002/9783527632732.ch10
Resumo em conferência
  1. Francesca Todescato; Ruben, Rui B.; Fernandes, Paulo R.; Pasquale Vena; André P.G. Castro. "Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering". Trabalho apresentado em ICCB2023 – X International Conference on Computational Bioengineering, Vienna, Austria, Vienna, 2023.
    Publicado
  2. MIRANDA-OLIVEIRA, PAULO; FLÁVIA COSTA; DIOGO CORREIA; MILENA VIEIRA; Ruben, Rui B.; Fernandes, Orlando. Autor correspondente: MIRANDA-OLIVEIRA, PAULO. "INFLUENCE OF THE GENDER IN THE JAVELIN THROW, IN ATHLETICS' HIGH-LEVEL ATHLETES". Trabalho apresentado em X CONGRESSO DA SOCIEDADE PORTUGUESA BIOMECÂNICA - CNB 2023, Figueira da Foz, 2023.
    Publicado
  3. Jud, L.; Castro, A. P. G.; Ruben, Rui B.; Feijóo, B.; Ribeiro, F.; Fernandes, Paulo R.. "Biomechanical Modelling of the Pseudoexfoliation Syndrome Impact in the Lenticular System's Accommodative". Trabalho apresentado em ESCRS Winter Meeting, (online), 2022.
  4. Miranda-Oliveira, Paulo; Diogo Correia; Milena Vieira; Ruben, Rui B.; Fernandes, Orlando. Autor correspondente: Miranda-Oliveira, Paulo. "Influência do género no Lançamento do Peso de rotação, em atletas de elite". Trabalho apresentado em 9º Congresso Nacional de Biomecânica, Porto, 2021.
    Publicado
  5. Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Finite Element Modelling of TPMS Scaffolds for Bone Tissue Engineering". Trabalho apresentado em Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2019), Nova York, 2019.
    Publicado
  6. Castro, A. P. G.; Ruben, Rui; Fernandes, Paulo R.; Perry Gouveia, Bárbara. "On The Permeability of 3D Printed TPMS Scaffolds". Trabalho apresentado em ESB2019, 25th Congress of the European Society of Biomechanics, Viena, 2019.
    Publicado
  7. Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Numerical Modelling of TPMS Scaffolds for Bone Tissue Engineering". Trabalho apresentado em Congresso de Métodos Numéricos em Engenharia (CMN 2019), Guimarães, 2019.
    Publicado
  8. Pinheiro, Júlia; Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Computational and Experimental assessment of mechanical properties for TPMS based scaffolds". Trabalho apresentado em 8th World Congress of Biomechanics (WCB 2018), Dublin, 2018.
    Publicado
  9. Almeida, Diogo F.; Ruben, Rui; Folgado, João; Fernandes, Paulo R.; Verhegghe, Benedict; De Beule, Matthieu. "Hexahedral Finite Element Mesh Generation for Total Hip Arthroplasty Analysis". Trabalho apresentado em Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisboa, 2018.
    Publicado
  10. Pinheiro, Júlia; Ruben, Rui; Castro, A. P. G.; Guedes, José; Fernandes, Paulo R.. "Numerical and Experimental characterization of TPMS based scaffolds". Trabalho apresentado em Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisboa, 2018.
    Publicado
  11. Almeida, Diogo; Ruben, Rui; Folgado, João; Fernandes, Paulo R.; De Beule, Matthieu; Verhegghe, Benedict. "A Total hip replacement toolbox: from CT-scan to patient-specific FE analysis". Trabalho apresentado em ESB2015, 21th Congress of the European Society of Biomechanics, Praga, 2015.
    Publicado
  12. Almeida, Diogo F.; Ruben, Rui; Folgado, João; Fernandes, Paulo R.; De Beule, Matthieu; Verhegghe, Benedict. "Hip Arthroplasty preparation: From CT-Scan to Patient-Specific FE Analysis". Trabalho apresentado em WCB 2014, World Congress of Biomechanics, Boston, 2014.
    Publicado
  13. Miranda-Oliveira, Paulo; Morouço, Pedro; Ruben, Rui B.. Autor correspondente: Miranda-Oliveira, Paulo. "ANÁLISE CINEMÁTICA 3D DA TÉCNICA FOSBURY FLOP". Trabalho apresentado em 5º Congresso Nacional de Biomecânica, Espinho, 2013.
    Publicado
Tese / Dissertação
  1. "Mechanical properties characterization of Nylon 12CF used in MEX process". Mestrado, Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, 2023.
  2. "Modeling and simulation of trachea with stent". Mestrado, Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, 2023.
  3. Pinto, João Miguel Brites. "Numerical simulation of tracheal stents". Mestrado, Instituto Politécnico de Leiria, 2022. http://hdl.handle.net/10400.8/8098.
  4. "Relation between porosity and cortical bone properties using homogenization". Mestrado, Université Polytechnique Hauts-de-France, 2022.
  5. "Development of an electric concept-motorbike: frame design and numerical analysis". Mestrado, Universiteit Gent, 2022.
  6. Lopes, Ricardo Narciso. "Determinação de propriedades de materiais não homogéneos através do método de homogeneização". Mestrado, 2021. http://hdl.handle.net/10400.8/5825.
  7. Ameixas, Miguel Ângelo Oliveira. "Desenvolvimento de um modelo numérico para a simulação de traqueias com implantes". Mestrado, Universidade Nova de Lisboa, 2021. http://hdl.handle.net/10362/139565.
  8. Rodrigues, João Filipe Veríssimo. "Determinação de Propriedades de materiais compósitos através do método de homogeneização". Mestrado, 2020. http://hdl.handle.net/10400.8/5422.
  9. Lopes, Ricardo da Silva Simões. "OTIMIZAÇÃO DE SUPORTES NA PRODUÇÃO DE COMPONENTES METÁLICOS POR PROCESSOS ADITIVOS". Mestrado, 2019. http://hdl.handle.net/10400.8/4775.
  10. Moroz, Ivan. "Estudo e comparação das propriedades do produto do processo de fabrico aditivo com o material convencional". Mestrado, 2019. http://hdl.handle.net/10400.8/4204.
  11. Quelal, Romeo Sebastián Rivadeneira. "Processing, characterization and simulation of extrusion process". Mestrado, 2019. http://hdl.handle.net/10400.8/4136.
  12. Nanjunda, Sachin. "Multi-branched tubular components using water-assisted injection moulding". Mestrado, 2018. http://hdl.handle.net/10400.8/3709.
  13. Sanches, Rafael Eugénio Martins. "Otimização simultânea de forma e topologia de estruturas casca". Mestrado, 2017. http://hdl.handle.net/10400.8/3048.
  14. Leite, João Pedro da Silva Correia. "The role of additive manufacturing in patient specific solutions". Mestrado, 2016. http://hdl.handle.net/10400.8/2359.
  15. Frade, Luis Miguel de Almeida. "Desenvolvimento e caracterização de materiais compósitos em fibra de carbono com amortecimento piezoelétrico em forqueta de bicicleta de estrada". Mestrado, 2015. http://hdl.handle.net/10400.8/2534.
  16. Lopes, Tiago Filipe Rodrigues. "Análise estrutural de telhas de aço autoportante". Mestrado, 2015. http://hdl.handle.net/10400.8/3102.
  17. Areia, João Carlos Portela. "Análise e otimização de viagens rodoviária". Mestrado, 2014. http://hdl.handle.net/10400.8/2238.
  18. Gomes, Daniel Monteiro. "Avaliação da resistência de vigas de madeira lamelada colada de pinheiro bravo". Mestrado, 2013. http://hdl.handle.net/10400.8/3116.
  19. Pedrosa, Ângela Soares. "Análise de Próteses da Anca Cimentadas". Mestrado, 2013. http://hdl.handle.net/10400.8/4902.

Outros

Outra produção
  1. Sebenta de Biofísica. Biomecânica é a mecânica aplicada à biologia. Por outras palavras, é o estudo de fenómenos biológicos através das teorias da mecânica. A palavra “mecânica” foi usada pela primeira vez por Galileu Galilei no livro Discorsi e dimostrazioni, intorno à due scienze attenenti alla mecanica & movimenti local (1638), para descrever força, movimento e resistência dos materiais. Com o decorrer dos anos o se. 2022. Macedo, Cidália; Ruben, Rui B.. http://hdl.handle.net/10400.8/7197.
    https://doi.org/10.25766/4p21-xg41
  2. Sebenta de Biomecânica dos Tecidos. O esqueleto é uma estrutura vital já que garante funções essenciais: • de protecção dos órgãos; • de suporte ao sistema muscular; • de reservatório de compostos minerais; • de produção de glóbulos brancos e vermelhos na cavidade medular. O esqueleto é formado por ossos que estão ligados entre si por articulações. A mineralização do tecido ósseo confere-lhe dureza. Saliente-se que as reservas de cá. 2022. Ruben, Rui Barreiros. http://hdl.handle.net/10400.8/7199.
    https://doi.org/10.25766/5gj4-1d29
  3. Sebenta de Simulação Computacional - Projeto Mecânico. Nos dias de hoje, o método dos elementos finitos está bastante divulgado e é utilizado, de uma forma generalizada, nas análises de engenharia. Nos próximos anos é expectável um crescimento do número de análises de engenharia realizadas através do método dos elementos finitos. O seu desenvolvimento começou com o advento do computador. A solução da análise por elementos finitos é obtida resolvendo u. 2022. Ruben, Rui Barreiros. http://hdl.handle.net/10400.8/7198.
    https://doi.org/10.25766/9mxk-1t46
  4. Automatic reconstruction of dental CT images using optimization. 2014. Paulo Amorim; Thiago de Moraes; Jorge da Silva; Helio Pedrini; Rui Ruben; Amorim, P.H.J.; De Moraes, T.F.; et al. https://doi.org/10.1201%2Fb17071-12.
    10.1201/b17071-12
Atividades

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2023 - 2026 biodegradable scaffolds
Coorientador
Universidade do Minho - Campus de Azurém, Portugal
2021/01 - 2025/01 Tracheal Implants
Orientador
Universidade Nova de Lisboa, Portugal
2021/01 - 2025/01 Adaptative Meshes
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2019 Estudo e Comparação das Propriedades Mecânicas do Material entre os Processos do Fabrico Rápido e Convencional
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019 - 2019 Processing, Characterization and Simulation of Extrusion Process
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019 - 2019 Multi-Branched Tubular Components Using Water-Assisted Injection Moulding
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2014 - 2017/06 A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universiteit Gent, Bélgica
2017 - 2017 Otimização Simultânea de Forma e Topologia de Estruturas Casca
Orientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017 - 2017 Estudo da Perda de Fixação do Cimento Ósseo
Orientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017 - 2017 Dimensionamento Estrutural de Moldes de Injeção
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2013 - 2017 A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016 The Role of Additive Manufacturing in Patient Specific Solutions
Orientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015 - 2015 Desenvolvimento e caracterização de materiais compósitos em fibra de carbono com amortecimento piezoelétrico em forqueta de bicicleta de estrada
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015 - 2015 Análise estrutural de telhas de aço autoportantes
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2014 - 2014 Aplicação de algoritmos para geração automática de malhas de elementos finitos hexaédricas
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014 Análise e otimização de viagens rodoviárias
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2013 - 2013 Avaliação da resistência de vigas de madeira lamelada colada de pinheiro bravo
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2012 - 2012 Processamento e caracterização de compósitos com fibras de carbono
Coorientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2012 - 2012 Influência das flanges nas próteses da anca cimentadas
Orientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2011 - 2011 Análise computacional da consolidação óssea
Orientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2011 - 2011 Comportamento mecânico de um acetábulo com abas versus sem abas
Orientador
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2019/01/24 - Atual Member of the Organization Committee of “RedÉtica - Ética Translacional: do Pensamento Filosófico à Prática”, Leiria, 24 January, 2019 (2019 - 2019/01/24)
2023/09 - 2023/09 Member of Scientific Committee of “ICCB2023 – X International Conference on Computational Bioengineering”, Vienna, Austria, 20-22 September, 2023. (2023 - 2023)
Conferência (Membro da Comissão Científica)
Technische Universität Wien Atominstitut, Áustria
2023/05 - 2023/05 2. Member of Scientific Committee of “CNB 2023 – 10th Portuguese Congress on Biomechanics”, Figueira da Foz, Portugal, 5-6 May, 2023. (2023 - 2023)
Congresso (Membro da Comissão Científica)
Universidade de Coimbra, Portugal
2022/04 - 2022/04 Member of Scientific Committee of “ICCB2022 – IX International Conference on Computational Bioengineering”, Lisbon, Portugal, 11-13 April, 2022. (2022 - 2022)
Conferência (Membro da Comissão Científica)
Universidade de Lisboa, Portugal
2021/10 - 2021/10 Member of the Organization Committee of “ProDPM 2021 – Progress in Digital and Physical Manufacturing”, Leiria, 27-29 October, 2021. (2021/10 - 2021/10)
Conferência (Membro da Comissão Organizadora)
Instituto Politécnico de Leiria, Portugal
2021/09 - 2021/10 Co-chair of the Organization Committee of ¿CNME 2020 ¿ 12th Portuguese Congress on Experimental Mechanics¿, Monte Real, Leiria, 29 September - 1 October, 2021. (2021/09 - 2021/10)
Conferência (Coorganizador)
Instituto Politécnico de Leiria, Portugal
2021/02 - 2021/02 Member of Scientific Committee of “CNB 2021 – 9th Portuguese Congress on Biomechanics”, Porto, Portugal (online version), 19-20 February, 2021. (2021 - 2021)
Congresso
Universidade do Porto, Portugal
2021/02 - 2021/02 Member of Scientific Committee of “CNB 2019 – 8th Portuguese Congress on Biomechanics”, Unhais da Serra, Covilhã, Portugal, 15-16 February, 2019. (2021 - 2021)
Congresso (Membro da Comissão Científica)
Universidade de Aveiro, Portugal
2019/09/02 - 2019/09/04 Member of the Organization Committee of “ProDPM 2019 – Progress in Digital and Physical Manufacturing”, Leiria, 2-4 October, 2019. (2019/09/02 - 2019/09/04)
2018/03/26 - 2018/03/29 Member of the Organization Committee of “CMBBE 2018 – 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization”, Lisbon, 26-29 March, 2018. (2018/03/26 - 2018/03/29)
2017/02 - 2017/02 Member of Scientific Committee of “CNB 2017 – 7th Portuguese Congress on Biomechanics”, Guimarães, Portugal, 10-11 February, 2017. (2017 - 2017)
Congresso (Membro da Comissão Científica)
Universidade do Minho, Portugal
2016/09 - 2016/09 Member of Scientific Committee of “Symposium Integrated Computational Tools for Advanced Manufactuting 2016 – ICT4AM”, Rhodes, Greece, 19-25 September, 2016. (2016 - 2016)
Simpósio
Instituto Politécnico de Leiria, Portugal
2016/06 - 2016/06 Member of Scientific Committee of “5th International Conference on Engineering Optimization – EngOpt 2016”, Iguassu, Brazil, 19-23 June, 2016. (2016 - 2016)
Conferência (Membro da Comissão Científica)
2015/06/25 - 2015/06/27 Member of the Organization Committee of “ICTE 2015 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Lisbon, 25-27 June, 2015. (2015/06/25 - 2015/06/27)
2015/06 - 2015/06 Member of Scientific Committee of “BioMedWomen – International Conference on Clinical and BioEngineering for Women’s Health”, Porto, Portugal, 20-23 June, 2015. (2015 - 2015)
Conferência (Membro da Comissão Científica)
Universidade do Porto, Portugal
2015/02/06 - 2015/02/07 Chair of the Organization Committee of “CNB 2015 – 6th Portuguese Conference on Biomechanics”, Monte Real, Leiria, 6-7 February, 2015. (2015/02/06 - 2015/02/07)
2015/02 - 2015/02 Member of Scientific Committee of “2015 IEEE 4th Portuguese Meeting on Bioengineering – ENBENG”, Porto, Portugal, 26-28 February, 2015. (2015 - 2015)
Encontro (Membro da Comissão Científica)
Universidade do Porto, Portugal
2014/10 - 2014/10 Member of Scientific Committee of “CNME 2014 – 9th Portuguese Congress on Experimental Mechanics”, Aveiro, Portugal, 15-17 October, 2014. (2014 - 2014)
Congresso
Universidade de Aveiro, Portugal
2013/10 - 2013/10 Member of Scientific Committee of “ICCEBS 2013 – International Conference on Computational and Experimental Biomedical Sciences”, Ponta Delgada, Portugal, 20-22 October, 2013. (2013 - 2013)
Conferência
Universidade de Lisboa, Portugal
2013/06/06 - 2013/06/08 Member of the Organization Committee of “ICTE 2013 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Leiria, 6-8 June, 2013. (2013/06/06 - 2013/06/08)
2013/02 - 2013/02 Member of Scientific Committee of “CNB 2013 – 5th Portuguese Congress on Biomechanics”, Espinho, Portugal, 8-9 February, 2013. (2013 - 2013)
Congresso (Membro da Comissão Científica)
Universidade do Porto, Portugal
2011/06/02 - 2011/06/04 Member of the Organization Committee of “ICTE 2011 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Lisbon, 2-4 June, 2011. (2011/06/02 - 2011/06/04)
2011/02 - 2011/02 Member of Scientific Committee of “CNB 2011 – 4th Portuguese Congress on Biomechanics”, Coimbra, Portugal, 4-5 February, 2011. (2011 - 2011)
Congresso (Membro da Comissão Científica)
Centro Hospitalar e Universitario de Coimbra EPE Centro de Simulação Biomédica dos Hospitais da Universidade de Coimbra, Portugal
2009/07/09 - 2009/07/11 Member of the Organization Committee of “ICTE 2009 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Leiria, 9-11 July, 2009. (2009/07/09 - 2009/07/11)

Júri de grau académico

Tema
Tipo de participação
Nome do candidato (Tipo de grau)
Instituição / Organização
2023/11 Reconstruction of scapula bone shapes from skin landmarks using statistical shape modeling
Arguente principal
Augusto Marques (Mestrado)
Universidade de Lisboa, Portugal
2023/05 Development and construction of a quick maintenance macro drill
Presidente do júri
João Silvestre (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/12 Concept study of bio-inspired implant for bone fixation
Arguente principal
Gabriel Ribeiro (Mestrado)
Universidade de Aveiro, Portugal
2022/12 Experimental and numerical analysis of bioinspired implant for small interface lesions
Arguente principal
Jorge Monteiro (Mestrado)
Universidade de Aveiro, Portugal
2022/12 Design of an adrenaline autoinjector apparatus
Arguente principal
Clara Serrano (Mestrado)
Universidade de Aveiro, Portugal
2022/11 Additive manufacturing of foamed structures
Presidente do júri
Abhishek Mistry (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/11 Development and validation of a 3D finite element model of the foot for the biomechanical analysis of the tibiotalar joint
Arguente principal
Beatriz Correia (Mestrado)
Universidade de Lisboa, Portugal
2022/11 Optimization of passive shunted damping configurations for displacement amplitude reduction of a plate
Arguente principal
Beatriz Luís (Mestrado)
Universidade de Lisboa, Portugal
2022/11 Tridimensional representation and virtual reality to architectonic visualization
Presidente do júri
Madalena Palmeira (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/10 Numerical simulation of tracheal stents
Orientador
João Pinto (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/07 Statistical modeling of the shoulder for the reconstruction of bone shapes based on anatomical landmarks
Arguente principal
Frederico Picado (Mestrado)
Universidade de Lisboa, Portugal
2022/05 3D printing on a large scale for the construction
Presidente do júri
Ludmila Vago Gomes (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/05 Product innovation for food packaging industry
Presidente do júri
Pramol Jain Mandya Nagesh (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/01 Large-scale additive manufacturing for composites
Presidente do júri
Patricio Alejandro Banda Vargas (Mestrado)
Instituto Politécnico de Leiria, Portugal
2022/01 Structural design of a particle detector for aerospace use
Presidente do júri
Nuno Miguel Martinho Roque (Mestrado)
Instituto Politécnico de Leiria, Portugal
2021/11 Damage-based assessment of the risk of cut-out in trochanteric fractures for different PFNA blade positions
Arguente principal
Francisco Rebelo de Andrade (Mestrado)
Universidade de Lisboa, Portugal
2021/11 Sustainability communications and the ceramic tile industry
Presidente do júri
Nazanin Sabet (Mestrado)
Instituto Politécnico de Leiria, Portugal
2021/10 Design and product development for human prosthesis manufacturing
Presidente do júri
Victor Ramos (Mestrado)
Instituto Politécnico de Leiria, Portugal
2020/12 Automatic volume inspection for glass blow moulds
Presidente do júri
Tiago Ferreira (Mestrado)
Instituto Politécnico de Leiria, Portugal
2020/12 Determination of properties of composite materials through the homogenization method
Orientador
João Rodrigues (Mestrado)
Instituto Politécnico de Leiria, Portugal
2020/12 Large scale Binder jet printing using waste materials
Presidente do júri
João Caldeira (Mestrado)
Instituto Politécnico de Leiria, Portugal
2020/12 Automatic volume inspection for glass blow moulds
Presidente do júri
Tiago Ferreira (Mestrado)
Instituto Politécnico de Leiria, Portugal
2020/10 Towards echocardiographic strain imaging of the mitral valve leaflets using block matching approaches
Arguente principal
Ana Barriga (Mestrado)
Universidade de Lisboa, Portugal
2019/12 Multi-objective optimization of curved composite laminated plates
Arguente principal
Fábio Aguincha (Mestrado)
Universidade de Lisboa, Portugal
2019/12 Industrial Project on Hot Runner Systems
Presidente do júri
Chethan Srinivasappa (Mestrado)
Instituto Politécnico de Leiria, Portugal
2019/12 Microinjection - case studies
Presidente do júri
António Lopes (Mestrado)
Instituto Politécnico de Leiria, Portugal
2019/11 Optimization of metallic supports in additive manufacturing
Orientador
Ricardo da Silva Lopes (Mestrado)
Instituto Politécnico de Leiria, Portugal
2019/11 Parametrização do Fabrico Aditivo em Grande Escala
Presidente do júri
Eduardo Crespo (Mestrado)
Instituto Politécnico de Leiria, Portugal
2019/10 Computational fluid dynamics simulation of TPMS scaffolds for bone tissue engineering
Arguente principal
Tiago Pires (Mestrado)
Universidade de Lisboa, Portugal
2019/07 Numerical Evaluation of Bone Fixation Systems for Long Bones
Arguente principal
Sara Neves (Mestrado)
Universidade de Coimbra, Portugal
2019/07 Biomechanical Evaluation in Basketball Practice
Arguente principal
Ana Catarina Amaro (Mestrado)
2019/06 Computational analysis of scapular notching in the shoulder arthroplasty with reverse prosthesis
Arguente principal
Inês Agulheiro (Mestrado)
Universidade de Lisboa, Portugal
2019/02 Characterization of the Properties of Porous Microstructures Produced by 3D Printing for Bone Substitutes
Arguente principal
Ana Laranjeira (Mestrado)
Universidade de Lisboa, Portugal
2019/02 Structural Optimization of a Landing Gear
Arguente principal
Filipa Leal (Mestrado)
Universidade de Lisboa, Portugal
2018/11 Design of Metallic Structures
Presidente do júri
Dhilipkumar Ganapathi (Mestrado)
Instituto Politécnico de Leiria, Portugal
2018/10 Structural Analysis and Optimization of a UAV Wing
Arguente principal
João Ferreira (Mestrado)
Universidade de Lisboa, Portugal
2018/10 Design and Multi-objective Optimization of a Composite Impact Attenuator for a Formula Student Car
Arguente principal
José Castro (Mestrado)
Universidade de Lisboa, Portugal
2018/09 Influence of the Geometry of Stemless Implants on the Bone Adaptation Process of the Humerus: a Computational Analysis
Arguente principal
Manuel Comenda (Mestrado)
Universidade de Lisboa, Portugal
2018/05 Analysis and Preliminary Design of a Walkable Mobile pool Flooring Cover
Arguente principal
Nuno Silva (Mestrado)
Universidade de Lisboa, Portugal
2018/05 Manufacturing Technologies in Mold Industry and Future Challenges
Presidente do júri
Hemeswar Narayanaswamy (Mestrado)
Instituto Politécnico de Leiria, Portugal
2017/12 Shape and Topologic Simultaneous Optimization of Shell Structures
Orientador
Rafael Sanches (Mestrado)
Instituto Politécnico de Leiria, Portugal
2017/11 Analysis of Bone Cement Loosening
Orientador
Paulo Oliveira (Mestrado)
Instituto Politécnico de Leiria, Portugal
2017/07 Design and Optimization of a Wing Structure for a UAS CLASS I 145 kg
Arguente principal
João Silva (Mestrado)
Academia da Força Aérea, Portugal
2016/12 Contribution à la modèlisation biofièle de l’être humain par la prise en compte des interactions fluide-structure
Arguente principal
Benoît Fontenier (Doutoramento)
Université Polytechnique Hauts-de-France, França
2016/09 The Role of Additive Manufacturing in Patient Specific Solutions
Orientador
João Leite (Mestrado)
Instituto Politécnico de Leiria, Portugal
2016 Jury of student Benoît Fontenier with the work “Contribution à la modèlisation biofièle de l’être humain par la prise en compte des interactions fluide-structure”, as examiner, in December 2016, at University of Valenciennes and Hainaut Cambresis.
Arguente principal
Benoît Fontenier (Doutoramento)
2015/10 Jury of student Nelson Souto with the work “Computational design of a mechanical test for material characterization by inverse analysis”, as examiner, in October 2015, at University of Aveiro.
Arguente
Nelson Souto (Doutoramento)
Universidade de Aveiro, Portugal
2015/10 Computational design of a mechanical test for material characterization by inverse analysis
Arguente
Nelson Souto (Doutoramento)
Universidade de Aveiro, Portugal
2015/04 Development and characterization of carbon composite materials with piezoelectric materials to a bicycle fork
Orientador
Luís Miguel Frade (Mestrado)
Instituto Politécnico de Leiria, Portugal
2014/12 Jury of student João Matias with the work “Infrared stereolithography”, as examiner, in December 2014, at University of Minho.
Arguente
João Matias (Doutoramento)
Universidade do Minho, Portugal
2014/12 Infrared stereolithography
Arguente
João Matias (Doutoramento)
Universidade do Minho, Portugal
2014/12 Study of shoulder joint, comparative analysis of inverted prosthesis
Arguente principal
Carlos Sousa (Mestrado)
Universidade de Aveiro, Portugal
2014/12 Experimental and numerical study of anckle joint
Arguente principal
David Coelho (Mestrado)
Universidade de Aveiro, Portugal
2014/11 Application of algorithms for automatic generation of hexahedral finite element meshes
Orientador
Luis Reis (Mestrado)
Universidade de Lisboa, Portugal
2012/12 Influence of Flanges in Cemented Hip Prosthesis
Orientador
Ângela Pedrosa (Mestrado)
Instituto Politécnico de Leiria, Portugal
2012/07 Design of Substitution Structures for the Intervertebral disc
Arguente principal
António Rodrigues (Mestrado)
Universidade Nova de Lisboa, Portugal
2011/12 Computational Analysis of Bone Healing
Orientador
Joana Filipa Pereira Gaspar (Mestrado)
Instituto Politécnico de Leiria, Portugal
2011/12 Mechanical Behavior of a Triflanged Acetabular compared with a normal one
Orientador
Diogo Henriques Teixeira (Mestrado)
Instituto Politécnico de Leiria, Portugal

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2020 - Atual Frontiers in Bioengineering and Biotechnology (2296-4185) Frontiers

Comissão de avaliação

Descrição da atividade
Tipo de assessoria
Instituição / Organização Entidade financiadora
2020/06 - 2020/06 Jury of student Maria de Fátima Paulino with the work “Desenvolvimento de Metodologias de Consolidação do Calo Ósseo e de Reabsorção Óssea Recorrendo a Sistemas de Fixação Externa e Fixação Interna”, as examiner, in June 2020, at University of Coimbra.
Avaliador
Universidade de Coimbra, Portugal
2017/02 - 2017/02 Jury of student Diogo Ferreira de Almeida with the work “A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis”, as supervisor, in February 2017, at University of Ghent.
Outro
Universiteit Gent, Bélgica

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2009/09 - Atual Master in Automotive Engineering Project of Automotive Vehicles (Mestrado) Instituto Politécnico de Leiria, Portugal
2009/09 - Atual Master in Product Development Engineering Modeling and Simulation of Products (Mestrado) Instituto Politécnico de Leiria, Portugal
2005/09 - Atual Biomechanics Biophysics I; Biophysics II; Computational Biomechanics; Tissue Engineering; Mechanics of Materials; Image Processing (Licenciatura) Instituto Politécnico de Leiria, Portugal
2001/09 - Atual Automotive Engineering Automotive Structures; Mechanics of Materials; Computational Mechanics (Licenciatura) Instituto Politécnico de Leiria, Portugal
2001/01 - Atual Mechanical Engineering Computational Mechanics; Physics; Drawing of Mechanical Constructions; Introduction to the Finite Element Method (Licenciatura) Instituto Politécnico de Leiria, Portugal
2023/11 - 2023/11 Seminar: “Engineering Tools for Personalized Medicine”, University of Coimbra, 24 of November 2023. (Doutoramento) Universidade de Coimbra, Portugal
2017/02 - 2017/07 Mechanical Engineering (at University of Coimbra) Mechanics of Materials I (Mestrado integrado) Universidade de Coimbra, Portugal
2014/04 - 2014/06 “Introduction to Advanced Abaqus”, 10 hours course, location: ISEL, Lisbon, June, 2014. “Introduction to Abaqus”, 10 hours course, location: ISEL, Lisbon, April, 2014. (Diploma de especialização)

Membro de associação

Nome da associação Tipo de participação
2023/05 - Atual Portuguese Society of Biomechanics President of Executive Board
2017/02 - 2019/02 Sociedade Portuguesa de Biomecânica Secretário Adjunto da Direção
2015/02 - 2017/02 Sociedade Portuguesa de Biomecânica Relator do Conselho Fiscal
Distinções

Outra distinção

2011 Young Researcher Prof. João Martins