???global.info.a_carregar???
Rui Miguel Barreiros Ruben has a BS.C (5 years), a BS.C and also a Ph.D degree in Mechanical Engineering, all three in Instituto Superior Técnico. Rui Ruben is Professor at Polytechnic of Leiria since 2001, where he has been responsible for several disciplines on Computational Mechanics and Biomechanics. Rui also has 1 Ph.D supervision already concluded, in Biomedical Engineering. It is a partnership between the University of Lisbon and the University of Ghent. Nowadays, Rui has 2 more Ph.D students. Rui B. Ruben was the first coordinator of the BS.c. degree in Biomechanics in 2005/06. Rui B. Ruben was Mechanical Engineering Department director from 2014 to 2016. Nowadays he is also member of Ethical Committee of Polytechnic of Leiria. He is member of Centre for Rapid and Sustainable Product Development (CDRsp) and contributing member of Laboratório Associado de Energia, Transportes e Aeronáutica (LAETA). His main research areas are Biomechanics, leading two projects: Software development for arthroplasty preparation (concluded) and Design and manufacturing of tracheal stents (on going). He also is part of other projects as team member. Rui Ruben has 22 documents in Scopus (h-index 9).
Identification

Personal identification

Full name
RUI MIGUEL BARREIROS RÚBEN

Citation names

  • Ruben, Rui B.

Author identifiers

Ciência ID
0A14-A279-7C05
ORCID iD
0000-0002-5407-0579

Knowledge fields

  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Upper intermediate (B2) Advanced (C1) Intermediate (B1) Upper intermediate (B2) Upper intermediate (B2)
Education
Degree Classification
2009/01/09
Concluded
PhD in Mechanical Engineering (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Optimal Design of Hip Prostheses" (THESIS/DISSERTATION)
approved by unanimity
2003/05/14
Concluded
Master in Mechanical Engineering (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Shape optimization of hip prostheses" (THESIS/DISSERTATION)
approved by unanimity
1994/09 - 1999
Concluded
Mechanical Engineering (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
15
Affiliation

Teaching in Higher Education

Category
Host institution
Employer
2023/07 - Current Teacher Coordinator (Polytechnic Teacher) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2009/02/01 - 2023/06 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019/02/01 - 2019/06/30 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
2016 - 2019 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal
2013 - 2016 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2001/09/01 - 2009/04/30 Assistant (Polytechnic Teacher) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Positions / Appointments

Category
Host institution
Employer
2024/01/10 - Current Organic Unit Director Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2018 - Current Coordinator of Biomechanics Bachelor degree Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017/07 - 2023/02 Member of Ethics Commission Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015/07 - 2021/11 Scientific and Technical Council Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015 - 2021 Member of Scientific and Technical Council Instituto Politécnico de Leiria, Portugal
2014 - 2016 Head of Mechanical Engineering Department Instituto Politécnico de Leiria, Portugal
2009 - 2012 Coordinator of Biomechanics Bachelor degree Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2004 - 2010 Member of Pedagogic Council Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2005 - 2007 Coordinator of Biomechanics Bachelor degree Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Projects

Contract

Designation Funders
2022/12/31 - 2025 EFEU: Emission Free European Universities
Co-Principal Investigator (Co-PI)
Instituto Politécnico de Leiria, Portugal
Erasmus Plus
Ongoing
2021/01/01 - 2023/12/31 Advanced Production and Intelligent Systems
LA/P/0112/2020
Researcher
Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2023/12/31 Centre for Rapid and Sustainable Product Development
UIDB/04044/2020
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/07/01 - 2023/06/30 SaFe – Development and Manufacturing of Tracheal Stents
Projeto 31/SI/2017
Co-Principal Investigator (Co-PI)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Agência Nacional de Inovação SA
Concluded
2018/10/20 - 2022/10/19 Development of "in vivo" experimental techniques and modeling methodologies for the evaluation of 4D scaffolds on bone defect in sheep model: an integrative research approach.
PTDC/CVT-CVT/31146/2017
Researcher
Instituto Politécnico de Leiria, Portugal

Universidade de Lisboa Faculdade de Motricidade Humana, Portugal

Universidade do Porto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2020 - 2021 Design of Cold Formed Steel Element with Omega-type Section for Secondary Frame Panels
Coberfer
Researcher
Concluded
2016/01/13 - 2020/10/12 Soft and Stretchable Mechatronics for Wearable Devices: Fabrication, Implementation and Applications
CMUP-ERI/TIC/0021/2014
Researcher
Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra, Portugal

Universidade de Coimbra Instituto de Sistemas e Robótica, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/01/01 - 2019/12/31 Centre for Rapid and Sustainable Product Development
UID/Multi/04044/2019
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019 - 2019 Table hospital FisioStation
FisioStation
Principal investigator
Concluded
2016 - 2016 Bending performance of cold formed omega beams (XBEAM)
Perfitec
Researcher
Concluded
2016 - 2016 Ultralight fire extinguisher
MR Martins e Reis
Principal investigator
Concluded
2016 - 2016 PVC pallet
Tucab
Researcher
Concluded
2014 - 2014 Development of a trochanteric plate for oblique fractures of the hip
University of Coimbra
Principal investigator
2010/04/01 - 2013/09/30 Development of Scaffolds with Controlled Microstructure for Bone Tissue Engineering
PTDC/EME-PME/104498/2008
Instituto de Engenharia Mecânica, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/04/01 - 2013/09/30 Software development for arthroplasty preparation
PTDC/SAU-BEB/103408/2008
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - LA 22 - 2011-2012
PEst-OE/EME/LA0022/2011
Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 4044 - 2011-2012
PEst-OE/EME/UI4044/2011
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/05/01 - 2010/10/31 Computational Modelling of Bone Structure - Application to Bone Tissue Engineering
PTDC/EME-PME/71436/2006
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/10/01 - 2008/06/30 OPTIMISATION AND RAPID FABRICATION OF ENGINEERING SCAFFOLDS FOR BONE INGROWTH
POCI/SAU-BMA/60287/2004
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Universidade de Aveiro, Portugal

Universidade de Évora, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Évora, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2006 - 2007 New Solutions to Guardrails Coating
Cabopol
Researcher
Cabopol Polymer Compounds SA, Portugal
Outputs

Publications

Book
  1. Ruben, Rui B.. Corresponding author: Ruben, Rui B.. Progress in Digital and Physical Manufacturing. Springer International Publishing. 2023.
    10.1007/978-3-031-33890-8
  2. Capela, Carlos; Correia, Mário Simões; Ruben, Rui. Proceedings of CNB 2015. Politécnico de Leiria - Escola Superior de Tecnologia e Gestão. 2020.
    https://doi.org/10.25766/vnbn-a964
  3. Ruben, Rui B.; Correia, Mário; CAPELA, CARLOS. Corresponding author: Ruben, Rui B.. Proceedings Book of 12th Portuguese Congress on Experimental Mechanics, CNME2020. Leiria, Portugal: ESTG. 2020.
    Published • Editor
  4. Almeida, Henrique; Vasco, Joel; Marto, Anabela; Capela, Carlos; Freitas, Dino; Craveiro, Flávio; Bártolo, Helena; et al. International Conference on Progress in Digital and Physical Manufacturing ProDPM'19 - Book of Abstracts. Instituto Politécnico de Leiria. 2019.
    https://doi.org/10.25766/2SGV-K049
  5. Fernandes, Paulo R; Tavares, João Manuel R. S.; Folgado, João; Quental, Carlos; Ruben, Rui. Book of Abstracts 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization. IDMEC - Instituto de Engenharia Mecânica. 2018.
  6. Almeida, Henrique; Paulo Rui Alves Fernandes; H. C. Rodrigues; Folgado, João; Ruben, Rui B.. ICTE 2011 – II INTERNATIONAL CONFERENCE ON TISSUE ENGINEERING. Lisboa, Portugal: IST-press. 2011.
    Published • Editor
  7. Fernandes, P.R.; Ruben, R.B.; Folgado, J.; Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. Corresponding author: Ruben, Rui B.. Bone Implant Design Using Optimization Methods. Wiley. 2010.
    10.1002/9783527632732.ch10
Book chapter
  1. Ruben, Rui B.; Dinis, Jairson; João Brites Pinto; Carlos A. Campos; Mário S. Correia; Henrique Almeida. "Tracheal Automatic Hexahedral Mesh Generation". In Proceedings of the 10th Congress of the Portuguese Society of Biomechanics. Springer, 2024.
    Published
  2. Ruben, Rui B.; MIRANDA-OLIVEIRA, PAULO; FLÁVIA COSTA; Diogo Correia; Milena Vieira; Orlando Fernandes. Corresponding author: MIRANDA-OLIVEIRA, PAULO. "Influence of the gender in the javelin throw, in athletics' high-level athletes". In Proceedings of the 10th Congress of the Portuguese Society of Biomechanics. Springer, 2024.
    Published
  3. Ruben, Rui B.; ricardo batista; a moreira; p mesquita. "Deformation of retaining screws on implants: Preliminary study using microCT". In Advances and Current Trends in Biomechanics. CRC press, 2021.
    Published
  4. Miranda-Oliveira, P.; Correia, D.; Vieira, M.M.; Ruben, R.B.; Fernandes, O.. "Influence of the gender in the rotational shot-put, in Athletics' elite athletes". In Advances and Current Trends in Biomechanics, 139-143. CRC Press, 2021.
    10.1201/9781003217152-32
  5. Almeida, Henrique A.; Vasco, Joel; Correia, Mário; Ruben, Rui. "Layer Thickness Evaluation Between Medical Imaging and Additive Manufacturing". In Lecture Notes in Computational Vision and Biomechanics, 693-701. Springer International Publishing, 2019.
    10.1007/978-3-030-32040-9_71
  6. Ruben, Rui; Fernandes, Paulo R.; Folgado, João. "Bone Implant Design Using Optimization Methods". In Biomechanics of Hard Tissues: Modelling-Testing-Materials, 263-295. Wiley, 2008.
    Published
Conference abstract
  1. Francesca Todescato; Ruben, Rui B.; Fernandes, Paulo R.; Pasquale Vena; André P.G. Castro. "Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering". Paper presented in ICCB2023 – X International Conference on Computational Bioengineering, Vienna, Austria, Vienna, 2023.
    Published
  2. MIRANDA-OLIVEIRA, PAULO; FLÁVIA COSTA; DIOGO CORREIA; MILENA VIEIRA; Ruben, Rui B.; Fernandes, Orlando. Corresponding author: MIRANDA-OLIVEIRA, PAULO. "INFLUENCE OF THE GENDER IN THE JAVELIN THROW, IN ATHLETICS' HIGH-LEVEL ATHLETES". Paper presented in X CONGRESSO DA SOCIEDADE PORTUGUESA BIOMECÂNICA - CNB 2023, Figueira da Foz, 2023.
    Published
  3. Jud, L.; Castro, A. P. G.; Ruben, Rui B.; Feijóo, B.; Ribeiro, F.; Fernandes, Paulo R.. "Biomechanical Modelling of the Pseudoexfoliation Syndrome Impact in the Lenticular System's Accommodative". Paper presented in ESCRS Winter Meeting, (online), 2022.
  4. Miranda-Oliveira, Paulo; Diogo Correia; Milena Vieira; Ruben, Rui B.; Fernandes, Orlando. Corresponding author: Miranda-Oliveira, Paulo. "Influência do género no Lançamento do Peso de rotação, em atletas de elite". Paper presented in 9º Congresso Nacional de Biomecânica, Porto, 2021.
    Published
  5. Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Finite Element Modelling of TPMS Scaffolds for Bone Tissue Engineering". Paper presented in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2019), Nova York, 2019.
    Published
  6. Castro, A. P. G.; Ruben, Rui; Fernandes, Paulo R.; Perry Gouveia, Bárbara. "On The Permeability of 3D Printed TPMS Scaffolds". Paper presented in ESB2019, 25th Congress of the European Society of Biomechanics, Viena, 2019.
    Published
  7. Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Numerical Modelling of TPMS Scaffolds for Bone Tissue Engineering". Paper presented in Congresso de Métodos Numéricos em Engenharia (CMN 2019), Guimarães, 2019.
    Published
  8. Pinheiro, Júlia; Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Computational and Experimental assessment of mechanical properties for TPMS based scaffolds". Paper presented in 8th World Congress of Biomechanics (WCB 2018), Dublin, 2018.
    Published
  9. Almeida, Diogo F.; Ruben, Rui; Folgado, João; Fernandes, Paulo R.; Verhegghe, Benedict; De Beule, Matthieu. "Hexahedral Finite Element Mesh Generation for Total Hip Arthroplasty Analysis". Paper presented in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisboa, 2018.
    Published
  10. Pinheiro, Júlia; Ruben, Rui; Castro, A. P. G.; Guedes, José; Fernandes, Paulo R.. "Numerical and Experimental characterization of TPMS based scaffolds". Paper presented in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisboa, 2018.
    Published
  11. Almeida, Diogo; Ruben, Rui; Folgado, João; Fernandes, Paulo R.; De Beule, Matthieu; Verhegghe, Benedict. "A Total hip replacement toolbox: from CT-scan to patient-specific FE analysis". Paper presented in ESB2015, 21th Congress of the European Society of Biomechanics, Praga, 2015.
    Published
  12. Almeida, Diogo F.; Ruben, Rui; Folgado, João; Fernandes, Paulo R.; De Beule, Matthieu; Verhegghe, Benedict. "Hip Arthroplasty preparation: From CT-Scan to Patient-Specific FE Analysis". Paper presented in WCB 2014, World Congress of Biomechanics, Boston, 2014.
    Published
  13. Miranda-Oliveira, Paulo; Morouço, Pedro; Ruben, Rui B.. Corresponding author: Miranda-Oliveira, Paulo. "ANÁLISE CINEMÁTICA 3D DA TÉCNICA FOSBURY FLOP". Paper presented in 5º Congresso Nacional de Biomecânica, Espinho, 2013.
    Published
Conference paper
  1. Ruben, Rui B.; Coelho, L.; Vieira, Judite; Marcelo Calvete Gaspar. "Developing Sustainability Competencies in Engineering and Management Students: A Strategic Approach". Paper presented in ICSR 2023, Bucareste, 2023.
    Published
  2. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Carvalho, Marta; Correia, Mário S.; Almeida, Henrique; A. Campos, Carlos; Cordeiro, Helder; Feijó, Salvato. "Materials simplification in tracheo-stent analysis". Paper presented in CMBBE2023 - 18th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Paris, 2023.
    Accepted
  3. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Carvalho, Marta S.; Almeida, Henrique; Correia, Mário S.; A. Campos, Carlos. "Simplificação da definição dos materiais na análise do implante traqueobrônquico". Paper presented in CNB2023 - X Congresso da Sociedade Portuguesa de Biomecânica, Figueira da Foz, 2023.
    Accepted
  4. Prola, Luis; Gala, Pedro Emanuel Alves Flores de Oliveira; Ruben, Rui B.; Cristiano Monteiro; Simões, Ana. "Effective Modulus Method (EMM) concept applied to thin-walled steel beams affected by local-distortional interaction". Paper presented in XIV Congresso de Construção Metálica e Mista, Coimbra, 2023.
    Published
  5. Prola, Luis; Gala, Pedro Emanuel Alves Flores de Oliveira; Ruben, Rui B.; Cristiano Monteiro; Simões, Ana. "Effective Modulus Method (EMM) concept applied to thin-walled steel members". Paper presented in 10th Eurosteel Conference, Amesterdão, 2023.
    Published
  6. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Almeida, Henrique; Correia, Mário S.; A. Campos, Carlos. "Automatic hexaedral mesh generation of a trachea with a stent". Paper presented in CMN2022 - Congress on Numerical Methods in Engineering, Las Palmas, 2022.
    Accepted
  7. Brites Pinto, João; Ruben, Rui B.; Jairson C. Dinis; Almeida, Henrique; Correia, Mário S.; A. Campos, Carlos. "Tracheobronchial materials computation definition". Paper presented in ESB2022 - 27th Congress of the European Society of Biomechanics, Porto, 2022.
    Accepted
  8. Dinis, Jairson C.; João Brites Pinto; Correia, Mário S.; Henrique Almeida; Carlos A. Campos; Ruben, Rui B.. "TRACHEOBRONCHIAL STENTS PERFORMANCE ANALYSIS". Paper presented in International Conference on Computational Bioengineering, Lisboa, 2022.
    Published
  9. Ferreira de Almeida, Diogo; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.; Benedict Verhegghe; Matthieu De Beule. "From CT-scan to finite element analysis for a patient specific hip arthroplasty". Paper presented in 8th World Congress of Biomechanics (WCB 2018), Dublin, 2018.
    Published
  10. Pinheiro, Júlia; Castro, A. P. G.; Ruben, Rui; Guedes, José; Fernandes, Paulo R.. "Mechanical Properties Assessment for TPMS Based Scaffolds Using Homogenization Methods". Paper presented in 6th European Conference on Computational Mechanics (ECCM 6), Glasgow, 2018.
    Published
  11. Diogo F. Almeida; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.; Benedict Verhegghe; Matthieu De Beule. "Hexahedral Finite Element Mesh Generation for Total Hip Arthroplasty". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Published
  12. Prola, Luis; Carvalho, C. F.G.J.; Pereira, João P. V.; Ruben, Rui B.. "Estudos do Comportamento à Flexão de Vigas de Perfis de Aço Enformado a Frio Tipo Omega - XBeam". Paper presented in XI Congresso de Construção Metálica e Mista, Coimbra, 2017.
    Published
  13. Diogo Almeida; Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; João Gamelas; Benedict Verhegghe; Matthieu De Beule. "Automated femoral landmark extraction for implant placement in hip arthroplasty". Paper presented in 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, 2016.
    Published
  14. Cruz, Pedro; Vaz, Daniela C.; Ruben, Rui B.; Avelelas, Francisco; Silva, Susana; Campos, Maria. "Chemical characterization of fungal chitosan for industrial applications". 2016.
    10.1186/s12913-016-1423-5
  15. Dinis, J.C.; Kemmoku, D.T.; Noritomi, P.Y.; Silva, J.V.L.; Ruben, R.B.. "Comparative analysis of mandibular symphysis plates". 2014.
  16. Ferreira de Almeida, Diogo; Folgado, João; Fernandes, Paulo R.; Ruben, Rui. "3D shape prior active contours for an automatic segmentation of a patient specific femur from a CT scan". Paper presented in 4th Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VIPIMAGE 2013, 2013.
    Published
  17. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "Histogram based threshold segmentation of the human femur body for patient specific acquired CT scan images". 2012.
  18. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "Development of an automated procedure for a patient specific segmentation of the human femur body from CT scan images". 2012.
  19. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. "Optimum Design of Cementless Hip Prostheses Considering Stem Alignment Effect on Long-Term Performance". Paper presented in IV European Conference on Computational Mechanics (ECCM 2010), Paris, 2010.
    Published
  20. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "The Effect of Varus and Valgus Alignment on Hip Stem Long-Term Performance". Paper presented in 17th Congress of the European Society of Biomechanics (ESB 2010), Edimburgo, 2010.
    Published
  21. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. "Shape Optimization of Cemented Hip Implants". Paper presented in 2nd International Conference on Engineering Optimization (EngOpt2010), Lisbon, 2010.
    Published
  22. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimum Design of Uncemented Hip Implants". Paper presented in 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisbon, 2009.
    Published
  23. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimização Geométrica da Prótese da Anca para Maximizar a Estabilidade Inicial e o Desempenho a Longo Prazo". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, 2009.
    Published
  24. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Análise de próteses não cimentadas: Estabilidade inicial e remodelação óssea". Paper presented in Métodos Numéricos e Computacionais em Engenharia- CMNE/CILAMCE2007, Porto, 2007.
    Published
  25. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Hip prosthesis design for optimal stability and a minimum of bone remodeling". Paper presented in ICCB2007 - III International Congress on Computational Bioengineering, Isla Margarita, 2007.
  26. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Rodrigues, Helder. "Hip Prosthesis Design Using a Multi-Criteria Formulation". Paper presented in III European Conference on Computational Mechanics ¿ Solids, Structures and Coupled Problems in Engineering (ECCM2006), 2006.
    Published
  27. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "A Three-Dimensional Model for Shape Optimization of Hip Prostheses Using a Multi-Criteria Formulation". Paper presented in Sixth World Congress on Structural and Multidisciplinary Optimization (WCSMO-6), Rio Janeiro, 2005.
    Published
  28. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimização Multi-objectivo da Geometria de Próteses da Articulação da Anca". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2005, Granada, 2005.
    Published
  29. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Rodrigues, Helder. "A 3D Multi-criteria optimization model for hip prosthesis design". Paper presented in ICCB2005 - II International Conference on Computational Bioengineering, Lisboa, 2005.
    Published
  30. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "A 3D Model for Uncemented Hip Prosthesis Design". Paper presented in 2nd International Conference on Advance Research in Virtual and Rapid Prototyping (VRAP2005), Leiria, 2005.
  31. Matias, João; Ruben, Rui B.; Bartolo, Paulo. "Modelação do Processo Directo e Inverso em Estereolitografia". Paper presented in SEMNI/APMTAC, 2005.
    Published
  32. Fernandas, P.R.; Ruben, R.B.. "Shape optimization of a cementless hip stem". 2003.
  33. Fernandes, Paulo R.; Ruben, Rui B.. "A computational procedure to optimize the shape of a cementless hip stem". Paper presented in 13th Conference of the European Society of Biomechanics, Wroclaw, 2002.
    Published
Edited book
  1. Fernandes, Paulo R.; Bártolo, Paulo; Folgado, João; Ruben, Rui B.; Almeida, Henrique. ICTE 2015, IV International Conference on Tissue Engineering ¿ Book of Abstracts. 2015.
  2. Ruben, Rui B.; Vieira, Milena; Campos, Carlos; Almeida, Henrique A.; Siopa, Jorge; Bártolo, Paulo; Folgado, João. Actas do 6º Congresso Nacional de Biomecânica / Proceedings of the 6th Portuguese Congress on Biomechanics. 2015.
  3. Bártolo, Paulo J.; Fernandes, Paulo R.; Ruben, Rui B.; Folgado, J.; Almeida, H.; Alves, N.; Mendes, A.. Proceeding of ICTE2009, International Conference on Tissue Engineering. Lisbon, Portugal: IST Press. 2009.
Journal article
  1. Prola, Luis; Gala, P.; Ruben, Rui B.; Simões, A.. "Effective Modulus Method (EMM) concept applied to thin-walled steel columns.". ce/papers 6 3-4 (2023): 1893-1898. http://dx.doi.org/10.1002/cepa.2488.
    10.1002/cepa.2488
  2. Ruben, Rui B.; Simões Correia, Mário António. "Evaluation of the effect of the building position on the mechanical behaviour of components produced by additive manufacturing - material extrusion". Revista Mecânica Experimental, APAET 36 75 (2023): http://www-ext.lnec.pt/APAET/paginas/Revista/revista.html.
    Published
  3. Jud, Leonor; Castro, André P. G.; Ruben, Rui B.; Feijóo, Bernardo; Ribeiro, Filomena J.; Fernandes, Paulo R.. "3D Modeling of the Crystalline Lens Complex under Pseudoexfoliation". Bioengineering 9 5 (2022): 212. http://dx.doi.org/10.3390/bioengineering9050212.
    10.3390/bioengineering9050212
  4. Tiago Pires; Jorge Santos; Rui B. Ruben; Bárbara P. Gouveia; André P.G. Castro; Paulo R. Fernandes. "Numerical-experimental analysis of the permeability-porosity relationship in triply periodic minimal surfaces scaffolds". Journal of Biomechanics 117 (2021): 110263-110263. https://doi.org/10.1016/j.jbiomech.2021.110263.
    10.1016/j.jbiomech.2021.110263
  5. Amorim, Paulo H. J.; Moraes, Thiago F.; Silva, Jorge V. L.; Pedrini, Helio; Ruben, Rui B.; Silva, Jorge V.L.. "Reconstruction of Panoramic Dental Images Through Bézier Function Optimization". Frontiers in Bioengineering and Biotechnology 8 (2020): http://dx.doi.org/10.3389/fbioe.2020.00794.
    10.3389/fbioe.2020.00794
  6. V Infante; JFA Madeira; Rui B Ruben; F Moleiro; Sofia Teixeira de Freitas; Infante, Virginia; Madeira, JFA; et al. "Characterization and optimization of hybrid carbon–glass epoxy composites under combined loading". Journal of Composite Materials (2019): 002199831983467-002199831983467. https://doi.org/10.1177/0021998319834673.
    10.1177/0021998319834673
  7. A. P. G. Castro; R. B. Ruben; S. B. Gonçalves; J. Pinheiro; J. M. Guedes; P. R. Fernandes. "Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering". Computer Methods in Biomechanics and Biomedical Engineering (2019): 1-7. https://doi.org/10.1080/10255842.2019.1569638.
    10.1080/10255842.2019.1569638
  8. Henrique A Almeida; Rui B Ruben. "Medical devices: from design to production". Advances in Mechanical Engineering 9 9 (2017): 168781401772989-168781401772989. https://doi.org/10.1177%2F1687814017729895.
    10.1177/1687814017729895
  9. Dinis, J.C.; Moraes, T.F.; Amorim, P.H.J.; Amorim, O.H.J.; Silva, J.V.L.; Ruben, Rui B.. "An open-source GUI application for segment foetal ultrasound images". International Journal of Signal and Imaging Systems Engineering 10 5 (2017): 271. http://dx.doi.org/10.1504/ijsise.2017.087770.
    10.1504/ijsise.2017.087770
  10. Diogo F. Almeida; Rui B. Ruben; João Folgado; Paulo R. Fernandes; Emmanuel Audenaert; Benedict Verhegghe; Matthieu De Beule. "Fully automatic segmentation of femurs with medullary canal definition in high and in low resolution CT scans". Medical Engineering & Physics 38 12 (2016): 1474-1480. https://doi.org/10.1016%2Fj.medengphy.2016.09.019.
    10.1016/j.medengphy.2016.09.019
  11. de Almeida DF; Ruben RB; Folgado J; Fernandes PR; Gamelas J; Verhegghe B; De Beule M. "Automated femoral landmark extraction for optimal prosthesis placement in total hip arthroplasty.". International journal for numerical methods in biomedical engineering (2016): http://europepmc.org/abstract/med/27781402.
    10.1002/cnm.2844
  12. Ruben, Rui. "Proceedings of the 3rd IPLeiria's International Health Congress : Leiria, Portugal. 6-7 May 2016.". BMC health services research (2016): http://europepmc.org/abstract/med/27409075.
    10.1186/s12913-016-1423-5
  13. Dinis, J.C.; Morais, T.F.; Amorim, P.H.J.; Ruben, R.B.; Almeida, H.A.; Inforçati, P.N.; Bártolo, P.J.; Silva, J.V.L.. "Open Source Software for the Automatic Design of Scaffold Structures for Tissue Engineering Applications". Procedia Technology 16 (2014): 1542-1547. http://dx.doi.org/10.1016/j.protcy.2014.10.176.
    10.1016/j.protcy.2014.10.176
  14. Almeida, Diogo; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "DEVELOPMENT OF AN AUTOMATED PROCEDURE FOR A PATIENT SPECIFIC SEGMENTATION OF THE FEMUR BODY". Journal of Biomechanics 45 (2012): S458. http://dx.doi.org/10.1016/s0021-9290(12)70459-1.
    10.1016/s0021-9290(12)70459-1
  15. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Madeira, J.F.A.. "OPTIMUM DESIGN OF CEMENTED HIP PROSTHESES". Journal of Biomechanics 45 (2012): S272. http://dx.doi.org/10.1016/s0021-9290(12)70273-7.
    10.1016/s0021-9290(12)70273-7
  16. Ruben, R.B.; Fernandes, P.R.; Folgado, J.. "On the optimal shape of hip implants". Journal of Biomechanics 45 2 (2012): 239-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-84455205555&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2011.10.038
  17. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "STEM GEOMETRY DESIGN TO OPTIMIZE THE STABILITY AND THE STRESS SHIELDING EFFECT AFTER A THA". Journal of Biomechanics 41 (2008): S67. http://dx.doi.org/10.1016/s0021-9290(08)70067-8.
    10.1016/s0021-9290(08)70067-8
  18. Ruben, R.B.; Folgado, J.; Fernandes, P.R.. "Three-dimensional shape optimization of hip prostheses using a multicriteria formulation". Structural and Multidisciplinary Optimization 34 3 (2007): 261-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547518851&partnerID=MN8TOARS.
    10.1007/s00158-006-0072-4
  19. Ruben, R.B.; Folgado, J.; Fernandes, P.R.. "Shape optimization of uncemented hip prostheses". Virtual and Physical Prototyping 1 3 (2006): 147-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956323731&partnerID=MN8TOARS.
    10.1080/17452750600942285
  20. Fernandes, P.R.; Folgado, J.; Ruben, R.B.. "Shape optimization of a cementless hip stem for a minimum of interface stress and displacement". Computer Methods in Biomechanics and Biomedical Engineering 7 1 (2004): 51-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-4544227014&partnerID=MN8TOARS.
    10.1080/10255840410001661637
Thesis / Dissertation
  1. "Mechanical properties characterization of Nylon 12CF used in MEX process". Master, Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, 2023.
  2. "Modeling and simulation of trachea with stent". Master, Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, 2023.
  3. Pinto, João Miguel Brites. "Numerical simulation of tracheal stents". Master, Instituto Politécnico de Leiria, 2022. http://hdl.handle.net/10400.8/8098.
  4. "Relation between porosity and cortical bone properties using homogenization". Master, Université Polytechnique Hauts-de-France, 2022.
  5. "Development of an electric concept-motorbike: frame design and numerical analysis". Master, Universiteit Gent, 2022.
  6. Lopes, Ricardo Narciso. "Determinação de propriedades de materiais não homogéneos através do método de homogeneização". Master, 2021. http://hdl.handle.net/10400.8/5825.
  7. Ameixas, Miguel Ângelo Oliveira. "Desenvolvimento de um modelo numérico para a simulação de traqueias com implantes". Master, Universidade Nova de Lisboa, 2021. http://hdl.handle.net/10362/139565.
  8. Rodrigues, João Filipe Veríssimo. "Determinação de Propriedades de materiais compósitos através do método de homogeneização". Master, 2020. http://hdl.handle.net/10400.8/5422.
  9. Lopes, Ricardo da Silva Simões. "OTIMIZAÇÃO DE SUPORTES NA PRODUÇÃO DE COMPONENTES METÁLICOS POR PROCESSOS ADITIVOS". Master, 2019. http://hdl.handle.net/10400.8/4775.
  10. Moroz, Ivan. "Estudo e comparação das propriedades do produto do processo de fabrico aditivo com o material convencional". Master, 2019. http://hdl.handle.net/10400.8/4204.
  11. Quelal, Romeo Sebastián Rivadeneira. "Processing, characterization and simulation of extrusion process". Master, 2019. http://hdl.handle.net/10400.8/4136.
  12. Nanjunda, Sachin. "Multi-branched tubular components using water-assisted injection moulding". Master, 2018. http://hdl.handle.net/10400.8/3709.
  13. Sanches, Rafael Eugénio Martins. "Otimização simultânea de forma e topologia de estruturas casca". Master, 2017. http://hdl.handle.net/10400.8/3048.
  14. Leite, João Pedro da Silva Correia. "The role of additive manufacturing in patient specific solutions". Master, 2016. http://hdl.handle.net/10400.8/2359.
  15. Frade, Luis Miguel de Almeida. "Desenvolvimento e caracterização de materiais compósitos em fibra de carbono com amortecimento piezoelétrico em forqueta de bicicleta de estrada". Master, 2015. http://hdl.handle.net/10400.8/2534.
  16. Lopes, Tiago Filipe Rodrigues. "Análise estrutural de telhas de aço autoportante". Master, 2015. http://hdl.handle.net/10400.8/3102.
  17. Areia, João Carlos Portela. "Análise e otimização de viagens rodoviária". Master, 2014. http://hdl.handle.net/10400.8/2238.
  18. Gomes, Daniel Monteiro. "Avaliação da resistência de vigas de madeira lamelada colada de pinheiro bravo". Master, 2013. http://hdl.handle.net/10400.8/3116.
  19. Pedrosa, Ângela Soares. "Análise de Próteses da Anca Cimentadas". Master, 2013. http://hdl.handle.net/10400.8/4902.

Other

Other output
  1. Sebenta de Biofísica. Biomecânica é a mecânica aplicada à biologia. Por outras palavras, é o estudo de fenómenos biológicos através das teorias da mecânica. A palavra “mecânica” foi usada pela primeira vez por Galileu Galilei no livro Discorsi e dimostrazioni, intorno à due scienze attenenti alla mecanica & movimenti local (1638), para descrever força, movimento e resistência dos materiais. Com o decorrer dos anos o se. 2022. Macedo, Cidália; Ruben, Rui B.. http://hdl.handle.net/10400.8/7197.
    https://doi.org/10.25766/4p21-xg41
  2. Sebenta de Biomecânica dos Tecidos. O esqueleto é uma estrutura vital já que garante funções essenciais: • de protecção dos órgãos; • de suporte ao sistema muscular; • de reservatório de compostos minerais; • de produção de glóbulos brancos e vermelhos na cavidade medular. O esqueleto é formado por ossos que estão ligados entre si por articulações. A mineralização do tecido ósseo confere-lhe dureza. Saliente-se que as reservas de cá. 2022. Ruben, Rui Barreiros. http://hdl.handle.net/10400.8/7199.
    https://doi.org/10.25766/5gj4-1d29
  3. Sebenta de Simulação Computacional - Projeto Mecânico. Nos dias de hoje, o método dos elementos finitos está bastante divulgado e é utilizado, de uma forma generalizada, nas análises de engenharia. Nos próximos anos é expectável um crescimento do número de análises de engenharia realizadas através do método dos elementos finitos. O seu desenvolvimento começou com o advento do computador. A solução da análise por elementos finitos é obtida resolvendo u. 2022. Ruben, Rui Barreiros. http://hdl.handle.net/10400.8/7198.
    https://doi.org/10.25766/9mxk-1t46
  4. Automatic reconstruction of dental CT images using optimization. 2014. Paulo Amorim; Thiago de Moraes; Jorge da Silva; Helio Pedrini; Rui Ruben; Amorim, P.H.J.; De Moraes, T.F.; et al. https://doi.org/10.1201%2Fb17071-12.
    10.1201/b17071-12
Activities

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2023 - 2026 biodegradable scaffolds
Co-supervisor
Universidade do Minho - Campus de Azurém, Portugal
2021/01 - 2025/01 Tracheal Implants
Supervisor
Universidade Nova de Lisboa, Portugal
2021/01 - 2025/01 Adaptative Meshes
Supervisor
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2019 Estudo e Comparação das Propriedades Mecânicas do Material entre os Processos do Fabrico Rápido e Convencional
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019 - 2019 Processing, Characterization and Simulation of Extrusion Process
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019 - 2019 Multi-Branched Tubular Components Using Water-Assisted Injection Moulding
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2014 - 2017/06 A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis
Supervisor
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universiteit Gent, Belgium
2017 - 2017 Otimização Simultânea de Forma e Topologia de Estruturas Casca
Supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017 - 2017 Estudo da Perda de Fixação do Cimento Ósseo
Supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017 - 2017 Dimensionamento Estrutural de Moldes de Injeção
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2013 - 2017 A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis
Supervisor
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016 The Role of Additive Manufacturing in Patient Specific Solutions
Supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015 - 2015 Desenvolvimento e caracterização de materiais compósitos em fibra de carbono com amortecimento piezoelétrico em forqueta de bicicleta de estrada
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2015 - 2015 Análise estrutural de telhas de aço autoportantes
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2014 - 2014 Aplicação de algoritmos para geração automática de malhas de elementos finitos hexaédricas
Co-supervisor
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014 Análise e otimização de viagens rodoviárias
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2013 - 2013 Avaliação da resistência de vigas de madeira lamelada colada de pinheiro bravo
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2012 - 2012 Processamento e caracterização de compósitos com fibras de carbono
Co-supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2012 - 2012 Influência das flanges nas próteses da anca cimentadas
Supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2011 - 2011 Análise computacional da consolidação óssea
Supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2011 - 2011 Comportamento mecânico de um acetábulo com abas versus sem abas
Supervisor
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Event organisation

Event name
Type of event (Role)
Institution / Organization
2019/01/24 - Current Member of the Organization Committee of “RedÉtica - Ética Translacional: do Pensamento Filosófico à Prática”, Leiria, 24 January, 2019 (2019 - 2019/01/24)
2023/09 - 2023/09 Member of Scientific Committee of “ICCB2023 – X International Conference on Computational Bioengineering”, Vienna, Austria, 20-22 September, 2023. (2023 - 2023)
Conference (Member of the Scientific Committee)
Technische Universität Wien Atominstitut, Austria
2023/05 - 2023/05 2. Member of Scientific Committee of “CNB 2023 – 10th Portuguese Congress on Biomechanics”, Figueira da Foz, Portugal, 5-6 May, 2023. (2023 - 2023)
Congress (Member of the Scientific Committee)
Universidade de Coimbra, Portugal
2022/04 - 2022/04 Member of Scientific Committee of “ICCB2022 – IX International Conference on Computational Bioengineering”, Lisbon, Portugal, 11-13 April, 2022. (2022 - 2022)
Conference (Member of the Scientific Committee)
Universidade de Lisboa, Portugal
2021/10 - 2021/10 Member of the Organization Committee of “ProDPM 2021 – Progress in Digital and Physical Manufacturing”, Leiria, 27-29 October, 2021. (2021/10 - 2021/10)
Conference (Member of the Organising Committee)
Instituto Politécnico de Leiria, Portugal
2021/09 - 2021/10 Co-chair of the Organization Committee of ¿CNME 2020 ¿ 12th Portuguese Congress on Experimental Mechanics¿, Monte Real, Leiria, 29 September - 1 October, 2021. (2021/09 - 2021/10)
Conference (Co-organisor)
Instituto Politécnico de Leiria, Portugal
2021/02 - 2021/02 Member of Scientific Committee of “CNB 2021 – 9th Portuguese Congress on Biomechanics”, Porto, Portugal (online version), 19-20 February, 2021. (2021 - 2021)
Congress
Universidade do Porto, Portugal
2021/02 - 2021/02 Member of Scientific Committee of “CNB 2019 – 8th Portuguese Congress on Biomechanics”, Unhais da Serra, Covilhã, Portugal, 15-16 February, 2019. (2021 - 2021)
Congress (Member of the Scientific Committee)
Universidade de Aveiro, Portugal
2019/09/02 - 2019/09/04 Member of the Organization Committee of “ProDPM 2019 – Progress in Digital and Physical Manufacturing”, Leiria, 2-4 October, 2019. (2019/09/02 - 2019/09/04)
2018/03/26 - 2018/03/29 Member of the Organization Committee of “CMBBE 2018 – 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization”, Lisbon, 26-29 March, 2018. (2018/03/26 - 2018/03/29)
2017/02 - 2017/02 Member of Scientific Committee of “CNB 2017 – 7th Portuguese Congress on Biomechanics”, Guimarães, Portugal, 10-11 February, 2017. (2017 - 2017)
Congress (Member of the Scientific Committee)
Universidade do Minho, Portugal
2016/09 - 2016/09 Member of Scientific Committee of “Symposium Integrated Computational Tools for Advanced Manufactuting 2016 – ICT4AM”, Rhodes, Greece, 19-25 September, 2016. (2016 - 2016)
Symposium
Instituto Politécnico de Leiria, Portugal
2016/06 - 2016/06 Member of Scientific Committee of “5th International Conference on Engineering Optimization – EngOpt 2016”, Iguassu, Brazil, 19-23 June, 2016. (2016 - 2016)
Conference (Member of the Scientific Committee)
2015/06/25 - 2015/06/27 Member of the Organization Committee of “ICTE 2015 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Lisbon, 25-27 June, 2015. (2015/06/25 - 2015/06/27)
2015/06 - 2015/06 Member of Scientific Committee of “BioMedWomen – International Conference on Clinical and BioEngineering for Women’s Health”, Porto, Portugal, 20-23 June, 2015. (2015 - 2015)
Conference (Member of the Scientific Committee)
Universidade do Porto, Portugal
2015/02/06 - 2015/02/07 Chair of the Organization Committee of “CNB 2015 – 6th Portuguese Conference on Biomechanics”, Monte Real, Leiria, 6-7 February, 2015. (2015/02/06 - 2015/02/07)
2015/02 - 2015/02 Member of Scientific Committee of “2015 IEEE 4th Portuguese Meeting on Bioengineering – ENBENG”, Porto, Portugal, 26-28 February, 2015. (2015 - 2015)
Meeting (Member of the Scientific Committee)
Universidade do Porto, Portugal
2014/10 - 2014/10 Member of Scientific Committee of “CNME 2014 – 9th Portuguese Congress on Experimental Mechanics”, Aveiro, Portugal, 15-17 October, 2014. (2014 - 2014)
Congress
Universidade de Aveiro, Portugal
2013/10 - 2013/10 Member of Scientific Committee of “ICCEBS 2013 – International Conference on Computational and Experimental Biomedical Sciences”, Ponta Delgada, Portugal, 20-22 October, 2013. (2013 - 2013)
Conference
Universidade de Lisboa, Portugal
2013/06/06 - 2013/06/08 Member of the Organization Committee of “ICTE 2013 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Leiria, 6-8 June, 2013. (2013/06/06 - 2013/06/08)
2013/02 - 2013/02 Member of Scientific Committee of “CNB 2013 – 5th Portuguese Congress on Biomechanics”, Espinho, Portugal, 8-9 February, 2013. (2013 - 2013)
Congress (Member of the Scientific Committee)
Universidade do Porto, Portugal
2011/06/02 - 2011/06/04 Member of the Organization Committee of “ICTE 2011 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Lisbon, 2-4 June, 2011. (2011/06/02 - 2011/06/04)
2011/02 - 2011/02 Member of Scientific Committee of “CNB 2011 – 4th Portuguese Congress on Biomechanics”, Coimbra, Portugal, 4-5 February, 2011. (2011 - 2011)
Congress (Member of the Scientific Committee)
Centro Hospitalar e Universitario de Coimbra EPE Centro de Simulação Biomédica dos Hospitais da Universidade de Coimbra, Portugal
2009/07/09 - 2009/07/11 Member of the Organization Committee of “ICTE 2009 – International Conference on Tissue Engineering – an ECCOMAS Thematic Conference”, Leiria, 9-11 July, 2009. (2009/07/09 - 2009/07/11)

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2023/11 Reconstruction of scapula bone shapes from skin landmarks using statistical shape modeling
(Thesis) Main arguer
Augusto Marques (Master)
Universidade de Lisboa, Portugal
2023/05 Development and construction of a quick maintenance macro drill
President of the jury
João Silvestre (Master)
Instituto Politécnico de Leiria, Portugal
2022/12 Concept study of bio-inspired implant for bone fixation
(Thesis) Main arguer
Gabriel Ribeiro (Master)
Universidade de Aveiro, Portugal
2022/12 Experimental and numerical analysis of bioinspired implant for small interface lesions
(Thesis) Main arguer
Jorge Monteiro (Master)
Universidade de Aveiro, Portugal
2022/12 Design of an adrenaline autoinjector apparatus
(Thesis) Main arguer
Clara Serrano (Master)
Universidade de Aveiro, Portugal
2022/11 Additive manufacturing of foamed structures
President of the jury
Abhishek Mistry (Master)
Instituto Politécnico de Leiria, Portugal
2022/11 Development and validation of a 3D finite element model of the foot for the biomechanical analysis of the tibiotalar joint
(Thesis) Main arguer
Beatriz Correia (Master)
Universidade de Lisboa, Portugal
2022/11 Optimization of passive shunted damping configurations for displacement amplitude reduction of a plate
(Thesis) Main arguer
Beatriz Luís (Master)
Universidade de Lisboa, Portugal
2022/11 Tridimensional representation and virtual reality to architectonic visualization
President of the jury
Madalena Palmeira (Master)
Instituto Politécnico de Leiria, Portugal
2022/10 Numerical simulation of tracheal stents
Supervisor
João Pinto (Master)
Instituto Politécnico de Leiria, Portugal
2022/07 Statistical modeling of the shoulder for the reconstruction of bone shapes based on anatomical landmarks
(Thesis) Main arguer
Frederico Picado (Master)
Universidade de Lisboa, Portugal
2022/05 3D printing on a large scale for the construction
President of the jury
Ludmila Vago Gomes (Master)
Instituto Politécnico de Leiria, Portugal
2022/05 Product innovation for food packaging industry
President of the jury
Pramol Jain Mandya Nagesh (Master)
Instituto Politécnico de Leiria, Portugal
2022/01 Large-scale additive manufacturing for composites
President of the jury
Patricio Alejandro Banda Vargas (Master)
Instituto Politécnico de Leiria, Portugal
2022/01 Structural design of a particle detector for aerospace use
President of the jury
Nuno Miguel Martinho Roque (Master)
Instituto Politécnico de Leiria, Portugal
2021/11 Damage-based assessment of the risk of cut-out in trochanteric fractures for different PFNA blade positions
(Thesis) Main arguer
Francisco Rebelo de Andrade (Master)
Universidade de Lisboa, Portugal
2021/11 Sustainability communications and the ceramic tile industry
President of the jury
Nazanin Sabet (Master)
Instituto Politécnico de Leiria, Portugal
2021/10 Design and product development for human prosthesis manufacturing
President of the jury
Victor Ramos (Master)
Instituto Politécnico de Leiria, Portugal
2020/12 Automatic volume inspection for glass blow moulds
President of the jury
Tiago Ferreira (Master)
Instituto Politécnico de Leiria, Portugal
2020/12 Determination of properties of composite materials through the homogenization method
Supervisor
João Rodrigues (Master)
Instituto Politécnico de Leiria, Portugal
2020/12 Large scale Binder jet printing using waste materials
President of the jury
João Caldeira (Master)
Instituto Politécnico de Leiria, Portugal
2020/12 Automatic volume inspection for glass blow moulds
President of the jury
Tiago Ferreira (Master)
Instituto Politécnico de Leiria, Portugal
2020/10 Towards echocardiographic strain imaging of the mitral valve leaflets using block matching approaches
(Thesis) Main arguer
Ana Barriga (Master)
Universidade de Lisboa, Portugal
2019/12 Multi-objective optimization of curved composite laminated plates
(Thesis) Main arguer
Fábio Aguincha (Master)
Universidade de Lisboa, Portugal
2019/12 Industrial Project on Hot Runner Systems
President of the jury
Chethan Srinivasappa (Master)
Instituto Politécnico de Leiria, Portugal
2019/12 Microinjection - case studies
President of the jury
António Lopes (Master)
Instituto Politécnico de Leiria, Portugal
2019/11 Optimization of metallic supports in additive manufacturing
Supervisor
Ricardo da Silva Lopes (Master)
Instituto Politécnico de Leiria, Portugal
2019/11 Parametrização do Fabrico Aditivo em Grande Escala
President of the jury
Eduardo Crespo (Master)
Instituto Politécnico de Leiria, Portugal
2019/10 Computational fluid dynamics simulation of TPMS scaffolds for bone tissue engineering
(Thesis) Main arguer
Tiago Pires (Master)
Universidade de Lisboa, Portugal
2019/07 Numerical Evaluation of Bone Fixation Systems for Long Bones
(Thesis) Main arguer
Sara Neves (Master)
Universidade de Coimbra, Portugal
2019/07 Biomechanical Evaluation in Basketball Practice
(Thesis) Main arguer
Ana Catarina Amaro (Master)
2019/06 Computational analysis of scapular notching in the shoulder arthroplasty with reverse prosthesis
(Thesis) Main arguer
Inês Agulheiro (Master)
Universidade de Lisboa, Portugal
2019/02 Characterization of the Properties of Porous Microstructures Produced by 3D Printing for Bone Substitutes
(Thesis) Main arguer
Ana Laranjeira (Master)
Universidade de Lisboa, Portugal
2019/02 Structural Optimization of a Landing Gear
(Thesis) Main arguer
Filipa Leal (Master)
Universidade de Lisboa, Portugal
2018/11 Design of Metallic Structures
President of the jury
Dhilipkumar Ganapathi (Master)
Instituto Politécnico de Leiria, Portugal
2018/10 Structural Analysis and Optimization of a UAV Wing
(Thesis) Main arguer
João Ferreira (Master)
Universidade de Lisboa, Portugal
2018/10 Design and Multi-objective Optimization of a Composite Impact Attenuator for a Formula Student Car
(Thesis) Main arguer
José Castro (Master)
Universidade de Lisboa, Portugal
2018/09 Influence of the Geometry of Stemless Implants on the Bone Adaptation Process of the Humerus: a Computational Analysis
(Thesis) Main arguer
Manuel Comenda (Master)
Universidade de Lisboa, Portugal
2018/05 Analysis and Preliminary Design of a Walkable Mobile pool Flooring Cover
(Thesis) Main arguer
Nuno Silva (Master)
Universidade de Lisboa, Portugal
2018/05 Manufacturing Technologies in Mold Industry and Future Challenges
President of the jury
Hemeswar Narayanaswamy (Master)
Instituto Politécnico de Leiria, Portugal
2017/12 Shape and Topologic Simultaneous Optimization of Shell Structures
Supervisor
Rafael Sanches (Master)
Instituto Politécnico de Leiria, Portugal
2017/11 Analysis of Bone Cement Loosening
Supervisor
Paulo Oliveira (Master)
Instituto Politécnico de Leiria, Portugal
2017/07 Design and Optimization of a Wing Structure for a UAS CLASS I 145 kg
(Thesis) Main arguer
João Silva (Master)
Academia da Força Aérea, Portugal
2016/12 Contribution à la modèlisation biofièle de l’être humain par la prise en compte des interactions fluide-structure
(Thesis) Main arguer
Benoît Fontenier (PhD)
Université Polytechnique Hauts-de-France, France
2016/09 The Role of Additive Manufacturing in Patient Specific Solutions
Supervisor
João Leite (Master)
Instituto Politécnico de Leiria, Portugal
2016 Jury of student Benoît Fontenier with the work “Contribution à la modèlisation biofièle de l’être humain par la prise en compte des interactions fluide-structure”, as examiner, in December 2016, at University of Valenciennes and Hainaut Cambresis.
(Thesis) Main arguer
Benoît Fontenier (PhD)
2015/10 Jury of student Nelson Souto with the work “Computational design of a mechanical test for material characterization by inverse analysis”, as examiner, in October 2015, at University of Aveiro.
(Thesis) Arguer
Nelson Souto (PhD)
Universidade de Aveiro, Portugal
2015/10 Computational design of a mechanical test for material characterization by inverse analysis
(Thesis) Arguer
Nelson Souto (PhD)
Universidade de Aveiro, Portugal
2015/04 Development and characterization of carbon composite materials with piezoelectric materials to a bicycle fork
Supervisor
Luís Miguel Frade (Master)
Instituto Politécnico de Leiria, Portugal
2014/12 Jury of student João Matias with the work “Infrared stereolithography”, as examiner, in December 2014, at University of Minho.
(Thesis) Arguer
João Matias (PhD)
Universidade do Minho, Portugal
2014/12 Infrared stereolithography
(Thesis) Arguer
João Matias (PhD)
Universidade do Minho, Portugal
2014/12 Study of shoulder joint, comparative analysis of inverted prosthesis
(Thesis) Main arguer
Carlos Sousa (Master)
Universidade de Aveiro, Portugal
2014/12 Experimental and numerical study of anckle joint
(Thesis) Main arguer
David Coelho (Master)
Universidade de Aveiro, Portugal
2014/11 Application of algorithms for automatic generation of hexahedral finite element meshes
Supervisor
Luis Reis (Master)
Universidade de Lisboa, Portugal
2012/12 Influence of Flanges in Cemented Hip Prosthesis
Supervisor
Ângela Pedrosa (Master)
Instituto Politécnico de Leiria, Portugal
2012/07 Design of Substitution Structures for the Intervertebral disc
(Thesis) Main arguer
António Rodrigues (Master)
Universidade Nova de Lisboa, Portugal
2011/12 Computational Analysis of Bone Healing
Supervisor
Joana Filipa Pereira Gaspar (Master)
Instituto Politécnico de Leiria, Portugal
2011/12 Mechanical Behavior of a Triflanged Acetabular compared with a normal one
Supervisor
Diogo Henriques Teixeira (Master)
Instituto Politécnico de Leiria, Portugal

Association member

Society Organization name Role
2023/05 - Current Portuguese Society of Biomechanics President of Executive Board
2017/02 - 2019/02 Sociedade Portuguesa de Biomecânica Secretário Adjunto da Direção
2015/02 - 2017/02 Sociedade Portuguesa de Biomecânica Relator do Conselho Fiscal

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2009/09 - Current Master in Automotive Engineering Project of Automotive Vehicles (Mestrado) Instituto Politécnico de Leiria, Portugal
2009/09 - Current Master in Product Development Engineering Modeling and Simulation of Products (Mestrado) Instituto Politécnico de Leiria, Portugal
2005/09 - Current Biomechanics Biophysics I; Biophysics II; Computational Biomechanics; Tissue Engineering; Mechanics of Materials; Image Processing (Licenciatura) Instituto Politécnico de Leiria, Portugal
2001/09 - Current Automotive Engineering Automotive Structures; Mechanics of Materials; Computational Mechanics (Licenciatura) Instituto Politécnico de Leiria, Portugal
2001/01 - Current Mechanical Engineering Computational Mechanics; Physics; Drawing of Mechanical Constructions; Introduction to the Finite Element Method (Licenciatura) Instituto Politécnico de Leiria, Portugal
2023/11 - 2023/11 Seminar: “Engineering Tools for Personalized Medicine”, University of Coimbra, 24 of November 2023. (Doutoramento) Universidade de Coimbra, Portugal
2017/02 - 2017/07 Mechanical Engineering (at University of Coimbra) Mechanics of Materials I (Mestrado integrado) Universidade de Coimbra, Portugal
2014/04 - 2014/06 “Introduction to Advanced Abaqus”, 10 hours course, location: ISEL, Lisbon, June, 2014. “Introduction to Abaqus”, 10 hours course, location: ISEL, Lisbon, April, 2014. (Diploma de especialização)

Evaluation committee

Activity description
Role
Institution / Organization Funding entity
2020/06 - 2020/06 Jury of student Maria de Fátima Paulino with the work “Desenvolvimento de Metodologias de Consolidação do Calo Ósseo e de Reabsorção Óssea Recorrendo a Sistemas de Fixação Externa e Fixação Interna”, as examiner, in June 2020, at University of Coimbra.
Evaluator
Universidade de Coimbra, Portugal
2017/02 - 2017/02 Jury of student Diogo Ferreira de Almeida with the work “A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis”, as supervisor, in February 2017, at University of Ghent.
Other
Universiteit Gent, Belgium

Journal scientific committee

Journal title (ISSN) Publisher
2020 - Current Frontiers in Bioengineering and Biotechnology (2296-4185) Frontiers
Distinctions

Other distinction

2011 Young Researcher Prof. João Martins