???global.info.a_carregar???
Pedro Manuel Ponces Rodrigues de Castro Camanho. Publicou 154 artigos em revistas especializadas. Possui 2 capítulo(s) de livros e 12 livro(s). No seu currículo Ciência Vitae os termos mais frequentes na contextualização da produção científica, tecnológica e artístico-cultural são: Mecânica; Materiais; Composite materials; delamination; fatigue; cohesive models; Tecnologia de interface, Outras ciências da engenharia e tecnologias; Interface technology, Other engineering and technologies; Ciências da engenharia e tecnologias::Outras ciências da engenharia e tecnologias; Engineering and technology::Other engineering and technologies; Engenharia mecânica; Termoelasticidade; Engenharia, Engenharia mecânica; Engineering, Mechanical engineering; Ciências da engenharia e tecnologias::Engenharia mecânica; Engineering and technology::Mechanical engineering; .
Read full resume ↓
Identification

Personal identification

Full name
Pedro Manuel Ponces Rodrigues de Castro Camanho

Citation names

  • Camanho, Pedro

Author identifiers

Ciência ID
C819-B58A-3DC3
ORCID iD
0000-0003-0363-5207

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Intermediate (B1) Advanced (C1) Beginner (A1) Intermediate (B1)
Spanish; Castilian Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Catalan Beginner (A1) Intermediate (B1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2010
Concluded
 n/a (Título de Agregado)
Universidade do Porto Faculdade de Engenharia, Portugal
"n/a" (THESIS/DISSERTATION)
 n/a
1999
Concluded
 PhD (Doutoramento)
Imperial College London, United Kingdom
"Application of numerical methods to the strength prediction of mechanically fastened joints in composite laminates" (THESIS/DISSERTATION)
 N/A
1995
Concluded
 MSc in Mechanical Engineering (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Experimental stress analysis using the thermoelastic effect" (THESIS/DISSERTATION)
 Muito Bom
1993
Concluded
 Engenharia Mecânica (Licenciatura)
Universidade do Porto Faculdade de Engenharia, Portugal
 15
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2014/04/09 - 2020/07/12 Full Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
2008/03/01 - 2014/04/09 Associate Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
1998 - 1999 Assistant (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal

Positions / Appointments

Category
Host institution 		Employer
2018/01/01 - 2019/12/31 President Universidade do Porto Faculdade de Engenharia, Portugal

Others

Category
Host institution 		Employer
1999 - 2001 Director. Structural Integrity Unit Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Projects

Grant

Designation Funders
2025/01/01 - Current Linking the scales towards non-conventional polymer composite structures
101141273
Principal investigator
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 European Research Council
Ongoing

Contract

Designation Funders
2022 - Current DIDEAROT - DIgital DEsign strategies to certify and mAnufacture Robust cOmposite sTructures
HORIZON-CL5-2021-D5-01-06
Researcher
European Union
2019 - Current NEWFRAC - New strategies for multi-field fracture problems across scales in heterogeneous systems for energy, health and transport
Grant agreement ID: 861061
Researcher
European Commission Marie Sklodowska-Curie Actions
Ongoing
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/UIDB/50022/2020
10.54499/UIDP/50022/2020
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2025/12/31 Associate Laboratory of Energy, Transports and Aerospace.
LA/P/0079/2020
10.54499/LA/P/0079/2020
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2022/01/13 - 2025/01/12 Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos
PTDC/EME-EME/2728/2021
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2018 - 2022 OPTIMACS - European industrial doctorate for efficient multidisciplinary design Optimization of Multifunctional Aerospace Composite Structures
Grant agreement ID: 764650
Researcher
Horizon 2020
2018 - 2022 OPTIMACS - European industrial doctorate for efficient multidisciplinary design Optimization of Multifunctional Aerospace Composite Structures
Grant agreement ID: 764650
 Horizon 2020
2019/01/01 - 2019/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/01/01 - 2019/12/31 Science and Technology for Competitive and Sustainable Industries
NORTE-01-0145-FEDER-000022
Principal investigator
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 European Union
Concluded
2016/06/01 - 2019/12/01 Desenvolvimento de Compósitos de Matrix Polimérica não Convencionais baseados em Análise Multi Escala e Otimização
PTDC/EMS-PRO/4732/2014
Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/07/02 - 2018/12/31 VATOOL - Virtual Allowable Tool
INEGI/FEUP/2018-77066
Principal investigator
Airbus Deutschland GmbH
Concluded
2016/01/01 - 2018/12/31 INSCAPE - In situ manufactured carbon-thermoplast curved stiffened panel
Grant agreement ID: 686894
Researcher
Clean Sky Joint Technology Initiative
Concluded
2016/01/01 - 2018 Introduction of advanced materials technologies into new product development for the mobility industries
MITP-TB/PFM/0005/2013
Principal investigator
Concluded
2016/07/07 - 2017/01/06 CAEI - Simulation of compression after edge impact
CAEI
 Airbus France
Concluded
2015/10/01 - 2016/07/31 COMDAMOD - Composite Damage Models Improvements
ComDaMod
Principal investigator
Airbus Deutschland GmbH
Concluded
2013/01/01 - 2015/12/31 SHEFAE- Surface heat exchangers for aero-engines
FP7
Researcher
European Union
2012/12/01 - 2015/11/30 2GenComp- second generation composite materials for aircraft structures
Airbus PO 8202919946
Researcher
Airbus France
Concluded
2013 - 2014 Three-dimensional FE models methods for polymer composites used in automotive structures
Daimler PO 1059206183
Principal investigator
Daimler AG
2009/04/01 - 2013/03/31 ANÁLISE E DESENVOLVIMENTO DE SISTEMAS INTEGRADOS PARA VEÍCULOS ELÉCTRICOS
MIT-Pt/EDAM-SMS/0030/2008
MIT-Pt/EDAM-SI/0025/2008
Universidade do Minho, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012 - 2013 Methods for the characterization of the translaminar fracture toughness of polymer composites
Daimler PO 1059203795
Principal investigator
Daimler AG
Concluded
2011/01/01 - 2012/12/31 Strategic Project - LA 22 - 2011-2012
PEst-OE/EME/LA0022/2011
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/01/01 - 2012/12/31 DELAT - Delamination assessment tool for composite structures
AO/1-5590/08/NL/RA
Researcher
European Space Agency
Concluded
2009/01/01 - 2012/09/30 Desenvolvimento de modelos e critérios de rotura para materiais compósitos tecidos do tipo 5 Harness satin obtidos for RTM
PTDC-EME-PME-65099-2003
Principal investigator
Fundação para a Ciência e a Tecnologia
2009/04/01 - 2012/03/31 Compositos Multiestaveis para Aplicação em Estruturas Aeronauticas Morfologicas
PTDC/EME-PME/64819/2006
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011 - 2012 High strain rate effects on textile and unidirectional composites
AESI/11-052
 Aernnova
Concluded
2009/04/01 - 2012 Multistable composite structures for application in morphing aircraft structures
PTDC-EME-PME-64819-2006
Researcher
Fundação para a Ciência e a Tecnologia
Concluded
2009 - 2012 iComp- integrated method for structural design of Composite components
Airbus PO 2311292
Principal investigator
Airbus France
Concluded
2007/05/01 - 2010 Mechanical response of advanced composites under high strain rates
PTDC-EME-PME-64984-2006
Principal investigator
Fundação para a Ciência e a Tecnologia
2007/01/01 - 2008/12/31 Continuum damage models for 3-D textile composites
B-9/07
Principal investigator
Concluded
2006/09/30 - 2008 Progressive failure analysis of advanced composites
FA8655-06-1-3072
Principal investigator
NASA Langley Research Center
Concluded
2006/06/01 - 2008 Increase of bolted joint performance for CFRP using hybrid laminates
TEC-MCS/2005/1270/In/AO
Researcher
European Space Agency
2006/12/01 - 2007/11/30 EDAM - Engineering Design and Advanced Manufacturing Pilot Project
POCI-EDAM-2006
Researcher
Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2007 Physically-based continuum damage models for the design of advanced composite structures
PDCTA-CTA-50354-2003
Principal investigator
Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2006/12/31 Interlaminar fatigue of laminated composite materials
E-45/05
Principal investigator
Concluded
2005/01/01 - 2006/12/31 Physically-based continuum damage models for the design of advanced composite structures
PDCTA-CTA-50354-2003
Principal investigator
Fundação para a Ciência e a Tecnologia
Concluded
2003/01/01 - 2004/12/31 Inserts for CFRP structures
ESTEC 16813/02/NL/PA
Principal investigator
European Space Agency
Concluded
2001/09/01 - 2004 Increasing the efficiency of CFRP bolted joints using bonded inserts
POCTI-EME-43525-2000
Principal investigator
Concluded

Other

Designation Funders
2022/10 - 2022/12 Simulation of composite coupons with complex 3D stress cases
N/A
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Airbus Operations SAS
Concluded
Outputs

Publications

Book
  1. Camanho, P.P.; Arteiro, A.. Analysis models for polymer composites across different length scales. 2016.
    10.1007/978-3-319-46120-5_9
  2. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. A finite fracture mechanics model for the prediction of the notched response and large damage capability of composite laminates. 2015.
    10.4028/www.scientific.net/kem.627.13
  3. Camanho, P.P.; Arteiro, A.; Catalanotti, G.; Melro, A.R.; Vogler, M.. Three-dimensional invariant-based failure criteria for transversely isotropic fibre-reinforced composites. 2015.
    10.1016/b978-0-08-100332-9.00005-0
  4. Camanho, P.P.; Hallett, S.R.. Numerical Modelling of Failure in Advanced Composite Materials. 2015.
    10.1016/C2014-0-02677-9
  5. Camanho, P.P.; Tong, L.. Introduction. 2011.
    10.1016/B978-1-84569-990-1.50021-1
  6. Camanho, P.P.; Tong, L.. Composite joints and connections. 2011.
  7. Fink, A.; Camanho, P.P.. Reinforcement of composite bolted joints by means of local metal hybridization. 2011.
    10.1016/b978-1-84569-990-1.50001-6
  8. Camanho, P.P.; Turon, A.; Costa, J.. Delamination propagation under cyclic loading. 2008.
    10.1533/9781845694821.4.485
  9. Camanho, P.P.; Pinho, S.T.; Dávila, C.G.; Remmers, J.. Preface. 2008.
  10. Faculdade de Engenharia. Analytical and numerical investigation of the length of the cohesive zone in delaminated composite materials. 2008.
    10.1007/978-1-4020-8584-0_4
  11. Turon, A.; Costa, J.; Camanho, P.P.; Maimí, P.. Analytical and numerical investigation of the length of the cohesive zone in delaminated composite materials. 2008.
  12. Faculdade de Engenharia. A graphical user interface for the Fastcomp software. 2006.
Book chapter
  1. Camanho, PP; Catalanotti, G. "Mechanical fastening of composite and composite-metal structures". 2018.
    10.1002/9781119429807.ch7
  2. Turon, A; Soto, A; Gonzalez, EV; Camanho, PP. "Analysis of delamination damage in composite structures using cohesive elements". 2018.
    10.1016/b978-0-12-803581-8.09979-3
Conference paper
  1. Igor A. Rodrigues Lopes; Danzi, Federico; Camanho, Pedro; Francisco M. Andrade Pires; Arteiro, Albertino. Corresponding author: Danzi, Federico. "A three-dimensional viscous-damage model polymer composites undergoing finite strains". Paper presented in ECCM 2022, Lausanne, 2022.
    Published • 10.5075/epfl-298799_978-2-9701614-0-0
  2. Kopp, R.; Ni, X.; Furtado, C.; Lee, J.; Kalfon-Cohen, E.; Uesugi, K.; Kinsella, M.; et al. "In Situ Synchrotron X-ray Microtomography of Progressive Damage in Canted Notched Cross-Ply Composites with Interlaminar Nanoreinforcement". 2022.
    10.2514/6.2022-0375
  3. Lopes, I.A.R.; Danzi, F.; Camanho, P.P.; Pires, F.M.A.; Arteiro, A.. "A THREE-DIMENSIONAL VISCOUS-DAMAGE MODEL FOR POLYMER COMPOSITES UNDERGOING FINITE STRAINS". 2022.
  4. Machado, J.M.; Bodaghi, M.; Camanho, P.P.; Advani, S.G.; Correia, N.C.. "VOID TRANSPORT IN LIQUID RESIN TRANSFER FLOW THROUGH DUAL-SCALE FIBRE REINFORCEMENTS". 2022.
  5. Danzi, F.; Tavares, R.; Xavier, J.; Fanteria, D.; Camanho, P.P.. "EFFECTS OF HYBRIDIZATION AND PLY THICKNESS ON CARBON/CARBON COMPOSITE LAMINATES STRENGTH AND TOUGHNESS". 2022.
  6. Gerbaud, P.-W.; Otero, F.; Bussetta, P.; Camanho, P.P.. "Viscoelastic-viscoplastic constitutive model for unidirectional fibre reinforced polymers". 2020.
  7. Kopp, R; Ni, X; Kalfon Cohen, E; Furtado, C; Arteiro, A; Borstnar, G; Mavrogordato, MN; et al. "Damage micro-mechanisms in notched hierarchical nanoengineered thin-ply composite laminates studied by in situ synchrotron x-ray microtomography". 2019.
    10.2514/6.2019-1692
  8. Arteiro, A; Catalanotti, G; Xavier, J; Linde, P; Camanho, PP. "Structural response of aerospace-grade thin-ply woven and non-crimp fabrics". 2017.
  9. Furtado, C; Ni, X; Kalfon Cohen, E; Arteiro, A; Wardle, BL; Camanho, PP. "Damage modelling of thin-ply nano-reinforced composite laminates". 2017.
  10. Kalfon Cohen, E; Kopp, R; Furtado, C; Ni, X; Fritz, N; Arteiro, A; Borstnar, G; et al. "Synergetic effects of thin ply and nanostitching studied by synchrotron radiation computed tomography". 2017.
  11. Ni, X; Kalfon Cohen, E; Furtado, C; Kopp, R; Fritz, NK; Arterio, A; Valdes, GA; et al. "Interlaminar reinforcement of carbon fiber composites using aligned carbon nanotubes". 2017.
  12. Tavares, RP; Otero, F; Turon, A; Camanho, PP. "Spring element model for hybrid composites with a random fire packing". 2017.
  13. Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Analysis of transverse compression and in-plane shear in unidirectional composites by a progressive damage model in presence of fiber rotation". 2016.
  14. Tavares, R.P.; Melro, A.R.; Turon, A.; Camanho, P.P.. "Modelling the tensile failure of hybrid polymer composites". 2016.
  15. Arteiro, A.; Furtado, C.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Selective ply-level hybridisation for improved notched response". 2016.
  16. Kuhn, P.; Catalanotti, G.; Xavier, J.; Cidade, R.; Koerber, H.; Camanho, P.P.. "Measurement of fracture toughness for fiber compressive failure mode of UD composites under high rate loading". 2016.
  17. Lopes, J; Stefaniak, D; Reis, L; Camanho, PP. "Single lap shear stress in hybrid CFRP/Steel composites". 2016.
    10.1016/j.prostr.2016.02.009
  18. Eskandari, S; Andrade Pires, FM; Camanho, PP; Marques, AT. "Analysis of transverse compression and in-plane shear in unidirectional composites by a progressive damage model in presence of fiber rotation". 2016.
  19. Arteiro, A; Furtado, C; Catalanotti, G; Xavier, J; Camanho, PP. "Selective ply-level hybridisation for improved notched response". 2016.
  20. Chevalier, J.; Janssens, Y.-A.; Camanho, P.P.; Pardoen, T.; Lani, F.. "Characterization and multi-scale modeling of the transverse compression of thick RTM-processed unidirectional samples". 2016.
  21. Camanho, P; Arteiro, A. "STRENGTH ANALYSIS OF COMPOSITE STRUCTURES USING FINITE FRACTURE MECHANICS". 2015.
  22. Catalanotti, G; Xavier, J; Camanho, P. "FRACTURE TOUGHNESS AND CRACK RESISTANCE CURVES IN THE LONGITUDINAL COMPRESSIVE FAILURE OF POLYMER COMPOSITES". 2015.
  23. Scalici, T; Pitarresi, G; Valenza, A; Catalanotti, G; Camanho, PP. "Experimental evaluation of through-the-thickness stress distribution in transverse crack tension test samples". 2015.
  24. Vogler, M.; Koerber, H.; Kuhn, P.; Rolfes, R.; Camanho, P.. "Constitutive modeling and experimental characterization of the non-linear stress-strain behavior of unidirectional carbon-epoxy under high strain rates". 2015.
  25. Camanho, P.P.; Arteiro, A.; Vogler, M.. "Invariant-based failure criteria for composite laminates". 2014.
  26. Koerber, H.; Vogler, M.; Kuhn, P.; Camanho, P.P.. "Experimental characterisation and modelling of nonlinear stress-strain behaviour and strain rate effects for unidirectional carbon-epoxy". 2014.
  27. Pinto, R.R.; Camanho, P.P.. "Prediction of out-of-plane failure modes in CFRP". 2014.
  28. Catalanotti, G.; Camanho, P.P.. "Measurement of the intralaminar fracture toughness and R-curve of polymer composites laminates using the size effect law". 2014.
  29. Arteiro, A; Catalanotti, G; Xavier, J; Camanho, PP. "Notched response of non-crimp fabric thin-ply laminates". 2013.
  30. Sousa, CS; Camanho, PP; Andrade Pires, FM; Suleman, A. "Variable stiffness flexible matrix laminates with prescribed finite elastic deformation". 2013.
  31. Sabaleuski, A.; Pires, F.M.A.; Camanho, P.P.. "Product architecture and technology selection in dynamic business environment". 2013.
  32. Sabaleuski, A; Pires, FMA; Camnho, PMP. "A framework for product architecture and technology selection in competitive environment". 2013.
    10.1109/itmc.2013.7352693
  33. Tavares, SMO; Camanho, P; de Castro, PMST. "Assessment of Materials for Fuselage Panels Considering Fatigue Behavior". 2013.
    10.4028/www.scientific.net/msf.730-732.265
  34. Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Modelling the micromechanical behaviour of 5-harness satin weaves obtained by RTM". 2012.
  35. Erçin, G.H.; Camanho, P.P.; Mahdi, S.; Linde, P.; Xavier, J.; Bessa, M.. "Size effects on the tensile and compressive failure of notched composite laminates". 2012.
  36. González, E.V.; Maimí, P.; Camanho, P.P.; Turon, A.; Costa, J.. "Effects of ply clustering in laminated composite plates under low-velocity impact loading". 2011.
  37. Koerber, H; Camanho, PP. "Characterisation of unidirectional Carbon-Epoxy IM7-8552 in longitudinal compression under high strain rates". 2009.
    10.1051/dymat/2009025
  38. Lopes, C.S.; Gürdal, Z.; Camanho, P.P.; Tatting, B.F.. "Progressive failure analysis of tow-placed, variable-stiffness composite panels". 2007.
  39. Dávila, C.G.; Camanho, P.P.. "Analysis of the effects of residual strains and defects on skin/stiffener debonding using decohesion elements". 2003.
  40. Castro, MRA; Marques, AT; Camanho, PP. "Design and quality control of structures made with pultruded profile". 2001.
  41. Tavares, CML; Ribeiro, MCS; Monteiro, D; Camanho, PP; Ferreira, AJM. "Experimental investigation into the static and fatigue behavior of polymer concrete reinforced with GFRP rods". 2001.
  42. Dávila, CG; Camanho, PP; de Moura, MF. "Mixed-mode decohesion elements for analyses of progressive delamination". 2001.
    10.2514/6.2001-1486
  43. Dávila, C.G.; Camanho, P.P.; de Moura, M.F.. "Mixed-mode decohesion elements for analyses of progressive delamination". 2001.
  44. Matthews, FL; Camanho, PP. "Bonded metallic inserts for bolted joints in FRP". 1999.
Journal article
  1. E. Polyzos; I.A. Rodrigues Lopes; P.P. Camanho; D. Van Hemelrijck; L. Pyl. "Continuum damage modeling of unidirectional 3D-printed composites under longitudinal tension". Composites Part A: Applied Science and Manufacturing (2025): https://doi.org/10.1016/j.compositesa.2025.108850.
    10.1016/j.compositesa.2025.108850
  2. Maryam Niazi; Federico Danzi; Ricardo Carbas; Pedro P. Camanho. "Identification of mode I fracture toughness in GFRP/Al and GFRP/Cu joints for structural batteries". Composite Structures (2024): https://doi.org/10.1016/j.compstruct.2024.118509.
    10.1016/j.compstruct.2024.118509
  3. E. Polyzos; I.A. Rodrigues Lopes; P.P. Camanho; D. Van Hemelrijck; L. Pyl. "Probabilistic progressive damage modeling of hybrid composites". Mechanics of Materials (2024): https://doi.org/10.1016/j.mechmat.2024.105087.
    10.1016/j.mechmat.2024.105087
  4. P. Minigher; A. Arteiro; A. Turon; J. Fatemi; S. Guinard; L. Barrière; P.P. Camanho. "On an efficient global/local stochastic methodology for accurate stress analysis, failure prediction and damage tolerance of laminated composites". International Journal of Solids and Structures (2024): https://doi.org/10.1016/j.ijsolstr.2024.113026.
    10.1016/j.ijsolstr.2024.113026
  5. I.R. Cózar; J.J. Arbeláez-Toro; P. Maimí; F. Otero; E.V. González; A. Turon; P.P. Camanho. "A novel methodology to measure the transverse Poisson’s ratio in the elastic and plastic regions for composite materials". Composites Part B: Engineering (2024): https://doi.org/10.1016/j.compositesb.2023.111098.
    10.1016/j.compositesb.2023.111098
  6. João Machado; Masoud Bodaghi; Mostafa Nikzad; Pedro P. Camanho; Suresh Advani; Nuno Correia. "On the understanding of bubble dynamics through a calibrated textile-like porous medium using a machine learning based algorithm". Composites Part A: Applied Science and Manufacturing (2024): https://doi.org/10.1016/j.compositesa.2023.107955.
    10.1016/j.compositesa.2023.107955
  7. Juan Macías; Albertino Arteiro; Fermín Otero; Pedro P. Camanho; José Reinoso. "Micro-mechanical analysis of composite materials using Phase-Field models of brittle fracture". European Journal of Mechanics - A/Solids (2023): https://doi.org/10.1016/j.euromechsol.2023.105069.
    10.1016/j.euromechsol.2023.105069
  8. Mitrou, A; Arteiro, A; Reinoso, J; Camanho, PP. "Modeling fracture of multidirectional thin-ply laminates using an anisotropic phase field formulation at the macro-scale". International Journal of Solids and Structures (2023):
    10.1016/j.ijsolstr.2023.112221
  9. Yan, B.; Tong, M.; Furtado, C.; Danzi, F.; Arteiro, A.; Pan, S.; Pan, X.; Camanho, P.P.. "An Improved Semi-analytical Method for the strength prediction of composite bonded scarf repairs". Composite Structures 306 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85144459840&partnerID=MN8TOARS.
    10.1016/j.compstruct.2022.116537
  10. Danzi, F.; Campos, P.J.S.; Arteiro, A.; Dalli, D.; Furtado, C.; Chevalier, J.; Tavares, R.P.; Lani, F.; Camanho, P.P.. "Longitudinal failure mechanisms and crack resistance curves of unidirectional thermoplastic composites". Engineering Fracture Mechanics 282 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85150787477&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2023.109147
  11. Rodrigues Lopes, Igor A.; Camanho, Pedro P.; Andrade Pires, Francisco M.; Arteiro, Albertino. "An invariant-based elasto-visco-plastic model for unidirectional polymer composites at finite strains". International Journal of Solids and Structures 236-237 (2022): 111292. http://dx.doi.org/10.1016/j.ijsolstr.2021.111292.
    10.1016/j.ijsolstr.2021.111292
  12. Breite, C; Melnikov, A; Turon, A; de Morais, AB; Le Bourlot, C; Maire, E; Schoberl, E; et al. "Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites". COMPOSITE STRUCTURES (2022):
    10.1016/j.compstruct.2021.114828
  13. Machado, J.M.; Tavares, J.M.R.S.; Camanho, P.P.; Correia, N.. "Automatic void content assessment of composite laminates using a machine-learning approach". Composite Structures 288 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85125250838&partnerID=MN8TOARS.
    10.1016/j.compstruct.2022.115383
  14. Cózar, I.R.; Otero, F.; Maimí, P.; González, E.V.; Miot, S.; Turon, A.; Camanho, P.P.. "A three-dimensional plastic-damage model for polymer composite materials". Composites Part A: Applied Science and Manufacturing 163 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85140752080&partnerID=MN8TOARS.
    10.1016/j.compositesa.2022.107198
  15. Zhuang, F.; Arteiro, A.; Tavares, R.P.; Camanho, P.P.; Chen, P.. "Modelling damage in half-hole pin bearing cross-ply and angle-ply composite laminates". Composite Structures 300 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85136520327&partnerID=MN8TOARS.
    10.1016/j.compstruct.2022.116103
  16. Federico Danzi; Pedro Ponces Camanho; Maria Helena Braga. "An All-Solid-State Coaxial Structural Battery Using Sodium-Based Electrolyte". Molecules 26 17 (2021): 5226-5226. https://doi.org/10.3390/molecules26175226.
    10.3390/molecules26175226
  17. Rui Martim Salgado; Federico Danzi; Joana Espain Oliveira; Anter El-Azab; Pedro Ponces Camanho; Maria Helena Braga. "The Latest Trends in Electric Vehicles Batteries". Molecules 26 11 (2021): 3188-3188. https://doi.org/10.3390/molecules26113188.
    10.3390/molecules26113188
  18. Federico Danzi; Rui Martim Salgado; Joana Espain Oliveira; Albertino Arteiro; Pedro Ponces Camanho; Maria Helena Braga. "Structural Batteries: A Review". Molecules 26 8 (2021): 2203-2203. https://doi.org/10.3390/molecules26082203.
    10.3390/molecules26082203
  19. Furtado, C; Pereira, LF; Tavares, RP; Salgado, M; Otero, F; Catalanotti, G; Arteiro, A; Bessa, MA; Camanho, PP. "A methodology to generate design allowables of composite laminates using machine learning". INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021):
    10.1016/j.ijsolstr.2021.111095
  20. Catalanotti, G; Salgado, RM; Camanho, PP. "On the Stress Intensity Factor of cracks emanating from circular and elliptical holes in orthotropic plates". ENGINEERING FRACTURE MECHANICS (2021):
    10.1016/j.engfracmech.2021.107805
  21. Ni, XC; Kopp, R; Kalfon Cohen, E; Furtado, C; Lee, J; Arteiro, A; Borstnar, G; et al. "In situ synchrotron computed tomography study of nanoscale interlaminar reinforcement and thin-ply effects on damage progression in composite laminates". COMPOSITES PART B-ENGINEERING (2021):
    10.1016/j.compositesb.2021.108623
  22. Laux, T; Gan, KW; Tavares, RP; Furtado, C; Arteiro, A; Camanho, PP; Thomsen, OT; Dulieu Barton, JM. "Modelling damage in multidirectional laminates subjected to multi-axial loading: Ply thickness effects and model assessment". COMPOSITE STRUCTURES (2021):
    10.1016/j.compstruct.2021.113766
  23. Furtado, C; Tavares, RP; Arteiro, A; Xavier, J; Linde, P; Wardle, BL; Camanho, PP. "Effects of ply thickness and architecture on the strength of composite sub-structures". COMPOSITE STRUCTURES (2021):
    10.1016/j.compstruct.2020.113061
  24. Danzi, F.; Tavares, R.P.; Xavier, J.; Fanteria, D.; Camanho, P.P.. "Effects of hybridization and ply thickness on the strength and toughness of composite laminates". Journal of Composite Materials 55 30 (2021): 4601-4616. http://www.scopus.com/inward/record.url?eid=2-s2.0-85115622071&partnerID=MN8TOARS.
    10.1177/00219983211041762
  25. Pardoen, T.; Klavzer, N.; Gayot, S.; Van Loock, F.; Chevalier, J.; Morelle, X.; Destoop, V.; et al. "Nanomechanics serving polymer-based composite research". Comptes Rendus Physique 22 S3 (2021): 1-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-85104287572&partnerID=MN8TOARS.
    10.5802/CRPHYS.56
  26. Breite, C.; Melnikov, A.; Turon, A.; de Morais, A.B.; Bourlot, C.L.; Maire, E.; Schöberl, E.; et al. "A synchrotron computed tomography dataset for validation of longitudinal tensile failure models based on fibre break and cluster development". Data in Brief 39 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120978692&partnerID=MN8TOARS.
    10.1016/j.dib.2021.107590
  27. Breite, C.; Melnikov, A.; Turon, A.; de Morais, A.B.; Otero, F.; Mesquita, F.; Costa, J.; et al. "Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites". Composites Science and Technology 202 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85097068073&partnerID=MN8TOARS.
    10.1016/j.compscitech.2020.108555
  28. Conde, FM; Coelho, PG; Tavares, RP; Rodrigues, HC; Guedes, JM; Camanho, PP. "Optimization of the microstructure of unidirectional hybrid composites under uniaxial tensile loads". COMPOSITE STRUCTURES (2020):
    10.1016/j.compstruct.2019.111795
  29. Arteiro, A; Gray, PJ; Camanho, PP. "Simulation of edge impact and compression after edge impact in CFRP laminates". COMPOSITE STRUCTURES (2020):
    10.1016/j.compstruct.2020.112018
  30. Ni, XC; Furtado, C; Fritz, NK; Kopp, R; Camanho, PP; Wardle, BL. "Interlaminar to intralaminar mode I and II crack bifurcation due to aligned carbon nanotube reinforcement of aerospace-grade advanced composites". COMPOSITES SCIENCE AND TECHNOLOGY (2020):
    10.1016/j.compscitech.2020.108014
  31. Furtado, C; Arteiro, A; Linde, P; Wardle, BL; Camanho, PP. "Is there a ply thickness effect on the mode I intralaminar fracture toughness of composite laminates?". THEORETICAL AND APPLIED FRACTURE MECHANICS (2020):
    10.1016/j.tafmec.2020.102473
  32. Maimi, P; Wagih, A; Ortega, A; Xavier, J; Blanco, N; Camanho, PP. "On the experimental determination of the J-curve of quasi-brittle composite materials". INTERNATIONAL JOURNAL OF FRACTURE (2020):
    10.1007/s10704-020-00456-0
  33. Arteiro, A; Sharma, N; Melo, JDD; Ha, SK; Miravete, A; Miyano, Y; Massard, T; et al. "A case for Tsai's Modulus, an invariant-based approach to stiffness". COMPOSITE STRUCTURES (2020):
    10.1016/j.compstruct.2020.112683
  34. Fritz, NK; Kopp, R; Nason, AK; Ni, XC; Lee, J; Stein, IY; Kalfon Cohen, E; et al. "New interlaminar features and void distributions in advanced aerospace-grade composites revealed via automated algorithms using micro-computed tomography". COMPOSITES SCIENCE AND TECHNOLOGY (2020):
    10.1016/j.compscitech.2020.108132
  35. Xinchen Ni; Carolina Furtado; Estelle Kalfon-Cohen; Yue Zhou; Gabriel A. Valdes; Travis J. Hank; Pedro P. Camanho; Brian L. Wardle. "Static and fatigue interlaminar shear reinforcement in aligned carbon nanotube-reinforced hierarchical advanced composites". Composites Part A: Applied Science and Manufacturing 120 (2019): 106-115. https://doi.org/10.1016/j.compositesa.2019.02.023.
    10.1016/j.compositesa.2019.02.023
  36. C. Karch; A. Arteiro; P.P. Camanho. "Modelling mechanical lightning loads in carbon fibre-reinforced polymers". International Journal of Solids and Structures 162 (2019): 217-243. https://doi.org/10.1016/j.ijsolstr.2018.12.013.
    10.1016/j.ijsolstr.2018.12.013
  37. Rodrigo P. Tavares; Jose M. Guerrero; Fermin Otero; Albert Turon; Joan A. Mayugo; Josep Costa; Pedro P. Camanho. "Effects of local stress fields around broken fibres on the longitudinal failure of composite materials". International Journal of Solids and Structures 156-157 (2019): 294-305. https://doi.org/10.1016/j.ijsolstr.2018.08.027.
    10.1016/j.ijsolstr.2018.08.027
  38. Chevalier, J; Morelle, XP; Camanho, PP; Lani, E; Pardoen, T. "On a unique fracture micromechanism for highly cross-linked epoxy resins". JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019):
    10.1016/j.jmps.2018.09.028
  39. Chevalier, J; Camanho, PP; Lani, F; Pardoen, T. "Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2018.10.076
  40. Mehdipour, H; Camanho, PP; Belingardi, G. "Elasto-plastic constitutive equations for short fiber reinforced polymers". COMPOSITES PART B-ENGINEERING (2019):
    10.1016/j.compositesb.2018.11.106
  41. Tavares, RP; Otero, F; Baiges, J; Turon, A; Camanho, PP. "A dynamic spring element model for the prediction of longitudinal failure of polymer composites". COMPUTATIONAL MATERIALS SCIENCE (2019):
    10.1016/j.commatsci.2018.12.048
  42. Eskandari, S; Andrade Pires, FMA; Camanho, PP; Cui, H; Petrinic, N; Marques, AT. "Analyzing the failure and damage of FRP composite laminates under high strain rates considering visco-plasticity". ENGINEERING FAILURE ANALYSIS (2019):
    10.1016/j.engfailanal.2019.03.008
  43. Kupski, J; de Freitas, ST; Zarouchas, D; Camanho, PP; Benedictus, R. "Composite layup effect on the failure mechanism of single lap bonded joints". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2019.02.093
  44. Guerrero, JM; Tavares, RP; Otero, F; Mayugo, JA; Costa, J; Turon, A; Camanho, PP. "An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2018.12.044
  45. Cidade, RA; Castro, DSV; Castrodeza, EM; Kuhn, P; Catalanotti, G; Xavier, J; Camanho, PP. "Determination of mode I dynamic fracture toughness of IM7-8552 composites by digital image correlation and machine learning". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2018.11.089
  46. Zhuang, FJ; Chen, PH; Arteiro, A; Camanho, PP. "Mesoscale modelling of damage in half-hole pin bearing composite laminate specimens". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2019.01.062
  47. Zhuang, FJ; Arteiro, A; Furtado, C; Chen, PH; Camanho, PP. "Mesoscale modelling of damage in single- and double-shear composite bolted joints". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2019.111210
  48. Furtado, C; Catalanotti, G; Arteiro, A; Gray, PJ; Wardle, BL; Camanho, PP. "Simulation of failure in laminated polymer composites: Building-block validation". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2019.111168
  49. Gerbaud, PW; Otero, F; Bussetta, P; Camanho, PP. "An invariant based transversely-isotropic constitutive model for unidirectional fibre reinforced composites considering the matrix viscous effects". MECHANICS OF MATERIALS (2019):
    10.1016/j.mechmat.2019.103146
  50. Akterskaia, M; Camanho, PP; Jansen, E; Arteiro, A; Rolfes, R. "Progressive delamination analysis through two-way global-local coupling approach preserving energy dissipation for single-mode and mixed-mode loading". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2019.110892
  51. Arteiro, A; Pereira, LF; Bessa, MA; Furtado, C; Camanho, PP. "A micro-mechanics perspective to the invariant-based approach to stiffness". COMPOSITES SCIENCE AND TECHNOLOGY (2019):
    10.1016/j.compscitech.2019.04.002
  52. Vallmajo, O; Cozar, IR; Furtado, C; Tavares, R; Arteiro, A; Turon, A; Camanho, PP. "Virtual calculation of the B-value allowables of notched composite laminates". COMPOSITE STRUCTURES (2019):
    10.1016/j.compstruct.2018.12.049
  53. Hannes Koerber; Peter Kuhn; Marina Ploeckl; Fermin Otero; Paul-William Gerbaud; Raimund Rolfes; Pedro P. Camanho. "Experimental characterization and constitutive modeling of the non-linear stress–strain behavior of unidirectional carbon–epoxy under high strain rate loading". Advanced Modeling and Simulation in Engineering Sciences 5 1 (2018): https://doi.org/10.1186/s40323-018-0111-x.
    10.1186/s40323-018-0111-x
  54. Kalfon Cohen, E; Kopp, R; Furtado, C; Ni, XC; Arteiro, A; Borstnar, G; Mavrogordato, MN; et al. "Synergetic effects of thin plies and aligned carbon nanotube interlaminar reinforcement in composite laminates". COMPOSITES SCIENCE AND TECHNOLOGY (2018):
    10.1016/j.compscitech.2018.01.007
  55. Arteiro, A; Catalanotti, G; Xavier, J; Linde, P; Camanho, PP. "A strategy to improve the structural performance of non-crimp fabric thin-ply laminates". COMPOSITE STRUCTURES (2018):
    10.1016/j.compstruct.2017.11.072
  56. Areias, P; Reinoso, J; Camanho, PP; Cesar de Sa, JC; Rabczuk, T. "Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation". ENGINEERING FRACTURE MECHANICS (2018):
    10.1016/j.engfracmech.2017.11.017
  57. Conde, FM; Coelho, PG; Tavares, RP; Camanho, PC; Guedes, JM; Rodrigues, HC. "Optimization of hybrid polymer composites under uniaxial traction". ENGINEERING COMPUTATIONS (2018):
    10.1108/ec-11-2017-0427
  58. Soto, A; Gonzalez, EV; Maimi, P; Mayugo, JA; Pasquali, PR; Camanho, PP. "A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels". COMPOSITE STRUCTURES (2018):
    10.1016/j.compstruct.2018.07.081
  59. Rodrigo P. Tavares; Fermin Otero; Albert Turon; Pedro P. Camanho. "Effective simulation of the mechanics of longitudinal tensile failure of unidirectional polymer composites". International Journal of Fracture 208 1-2 (2017): 269-285. https://doi.org/10.1007/s10704-017-0252-9.
    10.1007/s10704-017-0252-9
  60. von H.P.F. Silva, M.T.; Camanho, P.P.; Marques, A.T.; Castro, P.M.S.T.. "3D-reinforcement techniques for co-bonded CFRP/CFRP and CFRP/metal joints: a brief review". Ciencia e Tecnologia dos Materiais 29 1 (2017): e102-e107. http://www.scopus.com/inward/record.url?eid=2-s2.0-85022083810&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.07.011
  61. Kuhn, P.; Catalanotti, G.; Xavier, J.; Camanho, P.P.; Koerber, H.. "Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading". Composite Structures 182 (2017): 164-175. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029598415&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.09.040
  62. Reinoso, J.; Arteiro, A.; Paggi, M.; Camanho, P.P.. "Strength prediction of notched thin ply laminates using finite fracture mechanics and the phase field approach". Composites Science and Technology 150 (2017): 205-216. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026769295&partnerID=MN8TOARS.
    10.1016/j.compscitech.2017.07.020
  63. Arteiro, A.; Catalanotti, G.; Xavier, J.; Linde, P.; Camanho, P.P.. "Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics". Composite Structures 179 (2017): 208-223. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026363503&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.06.047
  64. Furtado, C.; Arteiro, A.; Bessa, M.A.; Wardle, B.L.; Camanho, P.P.. "Prediction of size effects in open-hole laminates using only the Young's modulus, the strength, and the R-curve of the 0° ply". Composites Part A: Applied Science and Manufacturing 101 (2017): 306-317. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021970708&partnerID=MN8TOARS.
    10.1016/j.compositesa.2017.04.014
  65. Jürgens, M.; Kolb, M.; Kurtovic, A.; Camanho, P.P.; Ladstaetter, E.. "Interfacial phenomena in metallic z-reinforced CFRP joints after hygrothermal ageing | Grenzflächenphänomene metallisch z-verstärkter hydrothermal gealterter CFK-verbindungen". Zeitschrift Kunststofftechnik/Journal of Plastics Technology 2017 1 (2017): 67-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-85012173100&partnerID=MN8TOARS.
    10.3139/O999.03012017
  66. Catalanotti, G.; Furtado, C.; Scalici, T.; Pitarresi, G.; van der Meer, F.P.; Camanho, P.P.. "The effect of through-thickness compressive stress on mode II interlaminar fracture toughness". Composite Structures 182 (2017): 153-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029574448&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.09.014
  67. Reinoso, J.; Catalanotti, G.; Blázquez, A.; Areias, P.; Camanho, P.P.; París, F.. "A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion". International Journal of Solids and Structures 126-127 (2017): 37-53. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026742392&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2017.07.023
  68. Marín, L.; González, E.V.; Maimí, P.; Trias, D.; Camanho, P.P.. "Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms". Composites Science and Technology 122 (2016): 130-139. http://www.scopus.com/inward/record.url?eid=2-s2.0-84949844565&partnerID=MN8TOARS.
    10.1016/j.compscitech.2015.10.020
  69. Cichosz, J.; Wehrkamp-Richter, T.; Koerber, H.; Hinterhölzl, R.; Camanho, P.P.. "Failure and damage characterization of (±30°) biaxial braided composites under multiaxial stress states". Composites Part A: Applied Science and Manufacturing 90 (2016): 748-759. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986612943&partnerID=MN8TOARS.
    10.1016/j.compositesa.2016.08.002
  70. Areias, P.; Rabczuk, T.; Camanho, P.P.. "Finite-strain laminates: Bending-enhanced hexahedron and delamination". Composite Structures 139 (2016): 277-290. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957803349&partnerID=MN8TOARS.
    10.1016/j.compstruct.2015.12.007
  71. Furtado, C.; Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Selective ply-level hybridisation for improved notched response of composite laminates". Composite Structures 145 (2016): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959329273&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.02.050
  72. Bai, X.; Bessa, M.A.; Melro, A.R.; Camanho, P.P.; Guo, L.; Liu, W.K.. "Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))". Composite Structures 153 (2016): 724-727. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978254123&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.05.081
  73. Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Damage analysis of out of plane undulated fiber composites". Composite Structures 152 (2016): 464-476. http://www.scopus.com/inward/record.url?eid=2-s2.0-84969857938&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.05.062
  74. Liu, W.K.; Fish, J.; Chen, J.S.; Camanho, P.P.. "Preface: special issue of computational mechanics on “Connecting Multiscale Mechanics to Complex Material Design”". Computational Mechanics 57 3 (2016): 355-357. http://www.scopus.com/inward/record.url?eid=2-s2.0-84961166549&partnerID=MN8TOARS.
    10.1007/s00466-015-1244-0
  75. Chevalier, J.; Morelle, X.P.; Bailly, C.; Camanho, P.P.; Pardoen, T.; Lani, F.. "Micro-mechanics based pressure dependent failure model for highly cross-linked epoxy resins". Engineering Fracture Mechanics 158 (2016): 1-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959311682&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2016.02.039
  76. Pinto, R.F.; Catalanotti, G.; Camanho, P.P.. "Measuring the intralaminar crack resistance curve of fibre reinforced composites at extreme temperatures". Composites Part A: Applied Science and Manufacturing 91 (2016): 145-155. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991738390&partnerID=MN8TOARS.
    10.1016/j.compositesa.2016.10.004
  77. Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Intralaminar damage in polymer composites in the presence of finite fiber rotation: Part II – Numerical analysis and validation". Composite Structures 151 (2016): 127-141. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960076444&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.01.048
  78. Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Intralaminar damage in polymer composites in the presence of finite fiber rotation: Part I – Constitutive model". Composite Structures 151 (2016): 114-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84956860236&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.01.047
  79. Tavares, R.P.; Melro, A.R.; Bessa, M.A.; Turon, A.; Liu, W.K.; Camanho, P.P.. "Mechanics of hybrid polymer composites: analytical and computational study". Computational Mechanics 57 3 (2016): 405-421. http://www.scopus.com/inward/record.url?eid=2-s2.0-84961188676&partnerID=MN8TOARS.
    10.1007/s00466-015-1252-0
  80. Areias, P.; Reinoso, J.; Camanho, P.; Rabczuk, T.. "A constitutive-based element-by-element crack propagation algorithm with local mesh refinement". Computational Mechanics (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84930796384&partnerID=MN8TOARS.
    10.1007/s00466-015-1172-z
  81. Lopes, J.; Freitas, M.; Stefaniak, D.; Camanho, P.P.. "Inter-laminar shear stress in hybrid CFRP/austenitic steel". Frattura ed Integrita Strutturale 31 (2015): 67-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920443527&partnerID=MN8TOARS.
    10.3221/igf-esis.31.06
  82. Koerber, H.; Xavier, J.; Camanho, P.P.; Essa, Y.E.; Martín De La Escalera, F.. "High strain rate behaviour of 5-harness-satin weave fabric carbon-epoxy composite under compression and combined compression-shear loading". International Journal of Solids and Structures 54 (2015): 172-182. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919331429&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2014.10.018
  83. Lopes, C.S.; Sádaba, S.; González, C.; LLorca, J.; Camanho, P.P.. "Physically-sound simulation of low-velocity impact on fiber reinforced laminates". International Journal of Impact Engineering (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84931858055&partnerID=MN8TOARS.
    10.1016/j.ijimpeng.2015.05.014
  84. Camanho, P.P.; Arteiro, A.; Melro, A.R.; Catalanotti, G.; Vogler, M.. "Three-dimensional invariant-based failure criteria for fibre-reinforced composites". International Journal of Solids and Structures 55 (2015): 92-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920547867&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2014.03.038
  85. Bai, X.; Bessa, M.A.; Melro, A.R.; Camanho, P.P.; Guo, L.; Liu, W.K.. "High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites". Composite Structures 134 (2015): 132-141. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940387537&partnerID=MN8TOARS.
    10.1016/j.compstruct.2015.08.047
  86. Arteiro, A.; Catalanotti, G.; Melro, A.R.; Linde, P.; Camanho, P.P.. "Micro-mechanical analysis of the effect of ply thickness on the transverse compressive strength of polymer composites". Composites Part A: Applied Science and Manufacturing 79 (2015): 127-137. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943652446&partnerID=MN8TOARS.
    10.1016/j.compositesa.2015.09.015
  87. Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Measurement of the compressive crack resistance curve of composites using the size effect law". Composites Part A: Applied Science and Manufacturing 56 (2014): 300-307. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896531283&partnerID=MN8TOARS.
    10.1016/j.compositesa.2013.10.017
  88. Gomes, V.S.; Lopes, C.S.; Pires, F.F.M.A.; Gürdal, Z.; Camanho, P.P.. "Fibre steering for shear-loaded composite panels with cutouts". Journal of Composite Materials 48 16 (2014): 1917-1926. http://www.scopus.com/inward/record.url?eid=2-s2.0-84902438267&partnerID=MN8TOARS.
    10.1177/0021998313492356
  89. Catalanotti, G.; Arteiro, A.; Hayati, M.; Camanho, P.P.. "Determination of the mode I crack resistance curve of polymer composites using the size-effect law". Engineering Fracture Mechanics 118 (2014): 49-65. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896317504&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2013.10.021
  90. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Large damage capability of non-crimp fabric thin-ply laminates". Composites Part A: Applied Science and Manufacturing 63 (2014): 110-122. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900840169&partnerID=MN8TOARS.
    10.1016/j.compositesa.2014.04.002
  91. Maimí, P.; González, E.V.; Camanho, P.P.. "Comment to the paper 'Analysis of progressive matrix cracking in composite laminates ii. first ply failure' by george j dvorak and norman laws". Journal of Composite Materials 48 9 (2014): 1139-1141. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899010984&partnerID=MN8TOARS.
    10.1177/0021998313483986
  92. Arteiro, A.; Catalanotti, G.; Melro, A.R.; Linde, P.; Camanho, P.P.. "Micro-mechanical analysis of the in situ effect in polymer composite laminates". Composite Structures 116 1 (2014): 827-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904567940&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.06.014
  93. Areias, P.; Rabczuk, T.; Camanho, P.P.. "Finite strain fracture of 2D problems with injected anisotropic softening elements". Theoretical and Applied Fracture Mechanics 72 1 (2014): 50-63. http://www.scopus.com/inward/record.url?eid=2-s2.0-84912574598&partnerID=MN8TOARS.
    10.1016/j.tafmec.2014.06.006
  94. Cousigné, O.; Moncayo, D.; Coutellier, D.; Camanho, P.; Naceur, H.. "Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations". Composite Structures 115 1 (2014): 75-88. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901999817&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.04.017
  95. González, E.V.; Maimí, P.; Sainz de Aja, J.R.; Cruz, P.; Camanho, P.P.. "Effects of interply hybridization on the damage resistance and tolerance of composite laminates". Composite Structures 108 1 (2014): 319-331. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892996393&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.09.037
  96. Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part II-Micromechanical analyses". International Journal of Solids and Structures 50 11-12 (2013): 1906-1915. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876112027&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2013.02.007
  97. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Notched response of non-crimp fabric thin-ply laminates: Analysis methods". Composites Science and Technology 88 (2013): 165-171. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885076549&partnerID=MN8TOARS.
    10.1016/j.compscitech.2013.09.003
  98. Areias, P.; Rabczuk, T.; Camanho, P.P.. "Initially rigid cohesive laws and fracture based on edge rotations". Computational Mechanics 52 4 (2013): 931-947. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885306679&partnerID=MN8TOARS.
    10.1007/s00466-013-0855-6
  99. Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I-Constitutive modelling". International Journal of Solids and Structures 50 11-12 (2013): 1897-1905. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876120080&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2013.02.009
  100. Cousigné, O.; Moncayo, D.; Coutellier, D.; Camanho, P.; Naceur, H.; Hampel, S.. "Development of a new nonlinear numerical material model for woven composite materials accounting for permanent deformation and damage". Composite Structures 106 (2013): 601-614. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883370296&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.07.026
  101. Camanho, P.P.; Bessa, M.A.; Catalanotti, G.; Vogler, M.; Rolfes, R.. "Modeling the inelastic deformation and fracture of polymer composites-Part II: Smeared crack model". Mechanics of Materials 59 (2013): 36-49. http://www.scopus.com/inward/record.url?eid=2-s2.0-84872423260&partnerID=MN8TOARS.
    10.1016/j.mechmat.2012.12.001
  102. Erçin, G.H.; Camanho, P.P.; Xavier, J.; Catalanotti, G.; Mahdi, S.; Linde, P.. "Size effects on the tensile and compressive failure of notched composite laminates". Composite Structures 96 (2013): 736-744. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870423235&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.10.004
  103. Tavares, S.M.O.; Camanho, P.; De Castro, P.M.S.T.. "Assessment of materials for fuselage panels considering fatigue behavior". Materials Science Forum 730-732 (2013): 265-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870739196&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.265
  104. Vogler, M.; Rolfes, R.; Camanho, P.P.. "Modeling the inelastic deformation and fracture of polymer composites-Part I: Plasticity model". Mechanics of Materials 59 (2013): 50-64. http://www.scopus.com/inward/record.url?eid=2-s2.0-84872371958&partnerID=MN8TOARS.
    10.1016/j.mechmat.2012.12.002
  105. Sousa, C.S.; Camanho, P.P.; Suleman, A.. "Analysis of multistable variable stiffness composite plates". Composite Structures 98 (2013): 34-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84872027559&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.10.053
  106. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Notched response of non-crimp fabric thin-ply laminates". Composites Science and Technology 79 (2013): 97-114. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876058452&partnerID=MN8TOARS.
    10.1016/j.compscitech.2013.02.001
  107. Heidari-Rarani, M.; Shokrieh, M.M.; Camanho, P.P.. "Finite element modeling of mode i delamination growth in laminated DCB specimens with R-curve effects". Composites Part B: Engineering 45 1 (2013): 897-903. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869488073&partnerID=MN8TOARS.
    10.1016/j.compositesb.2012.09.051
  108. Catalanotti, G.; Camanho, P.P.. "A semi-analytical method to predict net-tension failure of mechanically fastened joints in composite laminates". Composites Science and Technology 76 (2013): 69-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-84873202390&partnerID=MN8TOARS.
    10.1016/j.compscitech.2012.12.009
  109. Catalanotti, G.; Camanho, P.P.; Marques, A.T.. "Three-dimensional failure criteria for fiber-reinforced laminates". Composite Structures 95 (2013): 63-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868098268&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.07.016
  110. Pinho, S.T.; Darvizeh, R.; Robinson, P.; Schuecker, C.; Camanho, P.P.. "Material and structural response of polymer-matrix fibre-reinforced composites". Journal of Composite Materials 46 19-20 (2012): 2313-2341. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867283422&partnerID=MN8TOARS.
    10.1177/0021998312454478
  111. González, E.V.; Maimí, P.; Camanho, P.P.; Turon, A.; Mayugo, J.A.. "Simulation of drop-weight impact and compression after impact tests on composite laminates". Composite Structures 94 11 (2012): 3364-3378. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863104620&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.05.015
  112. Camanho, P.P.; Erçin, G.H.; Catalanotti, G.; Mahdi, S.; Linde, P.. "A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates". Composites Part A: Applied Science and Manufacturing 43 8 (2012): 1219-1225. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861338240&partnerID=MN8TOARS.
    10.1016/j.compositesa.2012.03.004
  113. Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Numerical simulation of the non-linear deformation of 5-harness satin weaves". Computational Materials Science 61 (2012): 116-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860338488&partnerID=MN8TOARS.
    10.1016/j.commatsci.2012.04.010
  114. Portela, P.; Preller, F.; Wittke, H.; Sinnema, G.; Camanho, P.; Turon, A.. "Delamination assessment tool for spacraft composite structures". European Space Agency, (Special Publication) ESA SP 691 SP (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84871098946&partnerID=MN8TOARS.
  115. Melro, A.R.; Camanho, P.P.; Pinho, S.T.. "Influence of geometrical parameters on the elastic response of unidirectional composite materials". Composite Structures 94 11 (2012): 3223-3231. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863090681&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.05.004
  116. Lopes, C.S.; Gürdal, Z.; Camanho, P.P.; Gomes, V.S.. "In-plane stiffness tailoring for the improvement of buckling and strength of composite panels with cut-outs". European Space Agency, (Special Publication) ESA SP 691 SP (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84871083394&partnerID=MN8TOARS.
  117. Camanho, P.P.; Arteiro, A.; Turon, A.; Costa, J.; Guillamet, G.; Gonzalez, E.. "Structural integrity of thin-ply laminates". JEC Composites Magazine 49 71 (2012): 91-92. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879657144&partnerID=MN8TOARS.
  118. Camanho, P.P.; Catalanotti, G.. "Analytical model for the prediction of the fracture toughness of multidirectional laminates". ICCM International Conferences on Composite Materials (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-84875923612&partnerID=MN8TOARS.
  119. Catalanotti, G.; Camanho, P.P.; Ghys, P.; Marques, A.T.. "Experimental and numerical study of fastener pull-through failure in GFRP laminates". Composite Structures 94 1 (2011): 239-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053051145&partnerID=MN8TOARS.
    10.1016/j.compstruct.2011.06.021
  120. Koerber, H.; Camanho, P.P.. "High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in longitudinal compression". Composites Part A: Applied Science and Manufacturing 42 5 (2011): 462-470. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952520245&partnerID=MN8TOARS.
    10.1016/j.compositesa.2011.01.002
  121. Camanho, P.P.; Catalanotti, G.. "On the relation between the mode I fracture toughness of a composite laminate and that of a 0° ply: Analytical model and experimental validation". Engineering Fracture Mechanics 78 13 (2011): 2535-2546. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960845049&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2011.06.013
  122. Catalanotti, G.; Camanho, P.P.; Ghys, P.; Marques, A.T.. "Fastener pull-through failure in GFRP laminates". ICCM International Conferences on Composite Materials (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-84875964837&partnerID=MN8TOARS.
  123. Catalanotti, G.; Camanho, P.P.; Ghys, P.; Marques, A.T.. "An efficient design method for multi-material bolted joints used in the railway industry". Composite Structures 94 1 (2011): 246-252. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053053510&partnerID=MN8TOARS.
    10.1016/j.compstruct.2011.06.018
  124. Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Turon, A.. "Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delamination". Mechanics of Materials 43 4 (2011): 194-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952206102&partnerID=MN8TOARS.
    10.1016/j.mechmat.2011.01.002
  125. González, E.V.; Maimí, P.; Camanho, P.P.; Lopes, C.S.; Blanco, N.. "Effects of ply clustering in laminated composite plates under low-velocity impact loading". Composites Science and Technology 71 6 (2011): 805-817. http://www.scopus.com/inward/record.url?eid=2-s2.0-79953101879&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.12.018
  126. Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Turon, A.. "Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination". Mechanics of Materials 43 4 (2011): 169-185. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952219358&partnerID=MN8TOARS.
    10.1016/j.mechmat.2010.12.003
  127. Lopes, C.S.; Gürdal, Z.; Camanho, P.P.. "Tailoring for strength of composite steered-fibre panels with cutouts". Composites Part A: Applied Science and Manufacturing 41 12 (2010): 1760-1767. http://www.scopus.com/inward/record.url?eid=2-s2.0-77958104866&partnerID=MN8TOARS.
    10.1016/j.compositesa.2010.08.011
  128. Lopes, C.S.; Seresta, O.; Gürdal, Z.; Camanho, P.P.. "Damage tolerance of non-conventional laminates with dispersed stacking sequences". International SAMPE Symposium and Exhibition (Proceedings) (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-78649463760&partnerID=MN8TOARS.
  129. Catalanotti, G.; Camanho, P.P.; Xavier, J.; Dávila, C.G.; Marques, A.T.. "Measurement of resistance curves in the longitudinal failure of composites using digital image correlation". Composites Science and Technology 70 13 (2010): 1986-1993. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956930796&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.07.022
  130. De Castro, P.M.S.T.; Camanho, P.P.; Da Silva, L.F.M.; Moreira, P.M.G.P.. "IDMEC - Faculdade de Engenharia da Universidade do Porto Concise presentation with focus on aeronautics R&D". International Journal of Structural Integrity 1 2 (2010): 161-172. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955036402&partnerID=MN8TOARS.
    10.1108/17579861011053899
  131. Lopes, C.; Camanho, P.P.; Gürdal, Z.. "Tailoring for strength of steered-fibre composite panels with cutouts". Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-84855620412&partnerID=MN8TOARS.
  132. Fink, A.; Camanho, P.P.; Andrés, J.M.; Pfeiffer, E.; Obst, A.. "Hybrid CFRP/titanium bolted joints: Performance assessment and application to a spacecraft payload adaptor". Composites Science and Technology 70 2 (2010): 305-317. http://www.scopus.com/inward/record.url?eid=2-s2.0-72949099267&partnerID=MN8TOARS.
    10.1016/j.compscitech.2009.11.002
  133. Overgaard, L.C.T.; Lund, E.; Camanho, P.P.. "A methodology for the structural analysis of composite wind turbine blades under geometric and material induced instabilities". Computers and Structures 88 19-20 (2010): 1092-1109. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955775664&partnerID=MN8TOARS.
    10.1016/j.compstruc.2010.06.008
  134. Koerber, H.; Xavier, J.; Camanho, P.P.. "High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation". Mechanics of Materials 42 11 (2010): 1004-1019. http://www.scopus.com/inward/record.url?eid=2-s2.0-78049316794&partnerID=MN8TOARS.
    10.1016/j.mechmat.2010.09.003
  135. Mayugo, J.A.; Camanho, P.P.; Maimí, P.; Dávila, C.G.. "Analytical modelling of transverse matrix cracking of [±¿/ 90n]s composite laminates under multiaxial loading". Mechanics of Advanced Materials and Structures 17 4 (2010): 237-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952392398&partnerID=MN8TOARS.
    10.1080/15376490903056577
  136. Turon, A.; Camanho, P.P.; Costa, J.; Renart, J.. "Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness". Composite Structures 92 8 (2010): 1857-1864. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950368310&partnerID=MN8TOARS.
    10.1016/j.compstruct.2010.01.012
  137. Blom, A.W.; Lopes, C.S.; Kromwijk, P.J.; Gürdal, Z.; Camanho, P.P.. "A theoretical model to study the influence of tow-drop areas on the stiffness and strength of variable-stiffness laminates". Journal of Composite Materials 43 5 (2009): 403-425. http://www.scopus.com/inward/record.url?eid=2-s2.0-62449169540&partnerID=MN8TOARS.
    10.1177/0021998308097675
  138. González, E.V.; Maimí, P.; Turon, A.; Camanho, P.P.; Renart, J.. "Simulation of delamination by means of cohesive elements using an explicit finite element code". Computers, Materials and Continua 9 1 (2009): 51-92. http://www.scopus.com/inward/record.url?eid=2-s2.0-63349101914&partnerID=MN8TOARS.
  139. Dávila, C.G.; Rose, C.A.; Camanho, P.P.. "A procedure for superposing linear cohesive laws to represent multiple damage mechanisms in the fracture of composites". International Journal of Fracture 158 2 (2009): 211-223. http://www.scopus.com/inward/record.url?eid=2-s2.0-69249232068&partnerID=MN8TOARS.
    10.1007/s10704-009-9366-z
  140. Pierron, F.; Camanho, P.; Wisnom, M.R.. "CompTest2008". Composites Part A: Applied Science and Manufacturing 40 12 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-71649097934&partnerID=MN8TOARS.
    10.1016/j.compositesa.2009.09.012
  141. Lopes, C.S.; Seresta, O.; Coquet, Y.; Gürdal, Z.; Camanho, P.P.; Thuis, B.. "Low-velocity impact damage on dispersed stacking sequence laminates. Part I: Experiments". Composites Science and Technology 69 7-8 (2009): 926-936. http://www.scopus.com/inward/record.url?eid=2-s2.0-64849104136&partnerID=MN8TOARS.
    10.1016/j.compscitech.2009.02.009
  142. Lopes, C.S.; Camanho, P.P.; Gürdal, Z.; Maimí, P.; González, E.V.. "Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations". Composites Science and Technology 69 7-8 (2009): 937-947. http://www.scopus.com/inward/record.url?eid=2-s2.0-64849095552&partnerID=MN8TOARS.
    10.1016/j.compscitech.2009.02.015
  143. Moreira, P.M.G.P.; De Matos, P.F.P.; Pastrama, S.D.; Camanho, P.P.; De Castro, P.M.S.T.. "Fatigue life prediction of a cracked lap splice specimen using fracture mechanics parameters". UPB Scientific Bulletin, Series D: Mechanical Engineering 71 3 (2009): 51-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887631140&partnerID=MN8TOARS.
  144. Pinho, S.T.; Robinson, P.; Schuecker, C.; Camanho, P.P.. "Pressure-dependent constitutive and failure model for laminated composites". ICCM International Conferences on Composite Materials (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052067595&partnerID=MN8TOARS.
  145. Lopes, C.; Gürdal, Z.; Camanho, P.P.; Maimí; González, E.V.. "Simulation of low-velocity impact damage on composite laminates". Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-84855625147&partnerID=MN8TOARS.
  146. Camanho, P.P.; Fink, A.; Obst, A.; Pimenta, S.. "Hybrid titanium-CFRP laminates for high-performance bolted joints". Composites Part A: Applied Science and Manufacturing 40 12 (2009): 1826-1837. http://www.scopus.com/inward/record.url?eid=2-s2.0-71649100159&partnerID=MN8TOARS.
    10.1016/j.compositesa.2009.02.010
  147. Melro, A.R.; Camanho, P.P.; Pinho, S.T.. "Generation of random distribution of fibres in long-fibre reinforced composites". Composites Science and Technology 68 9 (2008): 2092-2102. http://www.scopus.com/inward/record.url?eid=2-s2.0-44149088288&partnerID=MN8TOARS.
    10.1016/j.compscitech.2008.03.013
  148. Maimi, P.; Mayugo, J.A.; Camanho, P.P.. "A three-dimensional damage model for transversely isotropic composite laminates". Journal of Composite Materials 42 25 (2008): 2717-2745. http://www.scopus.com/inward/record.url?eid=2-s2.0-57049170403&partnerID=MN8TOARS.
    10.1177/0021998308094965
  149. Dávila, C.G.; Camanho, P.P.; Turon, A.. "Effective simulation of delamination in aeronautical structures using shells and cohesive elements". Journal of Aircraft 45 2 (2008): 663-672. http://www.scopus.com/inward/record.url?eid=2-s2.0-42949130591&partnerID=MN8TOARS.
    10.2514/1.32832
  150. Lopes, C.S.; Gürdal, Z.; Camanho, P.P.. "Variable-stiffness composite panels: Buckling and first-ply failure improvements over straight-fibre laminates". Computers and Structures 86 9 (2008): 897-907. http://www.scopus.com/inward/record.url?eid=2-s2.0-40849084166&partnerID=MN8TOARS.
    10.1016/j.compstruc.2007.04.016
  151. Portela, P.; Camanho, P.; Weaver, P.; Bond, I.. "Analysis of morphing, multi stable structures actuated by piezoelectric patches". Computers and Structures 86 3-5 (2008): 347-356. http://www.scopus.com/inward/record.url?eid=2-s2.0-38949172771&partnerID=MN8TOARS.
    10.1016/j.compstruc.2007.01.032
  152. González, E.V.; Maimí, P.; Turon, A.; Camanho, P.; Mayugo, J.-A.; Costa, J.. "Composite skin-stiffener virtual testing". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960067124&partnerID=MN8TOARS.
  153. Melro, A.R.; Camanho, P.P.; Pinho, S.T.. "Generation of transversal material randomness in fibre reinforced composites". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960065302&partnerID=MN8TOARS.
  154. Camanho, P.P.; Maimí, P.. "Size effects on the strength of notched composites". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960064201&partnerID=MN8TOARS.
  155. Lopes, C.S.; Camanho, P.P.; Gürdal, Z.; Tatting, B.F.. "Progressive damage analysis of tow-steered composite panels in postbuckling". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960040716&partnerID=MN8TOARS.
  156. Lopes, C.S.; Camanho, P.P.; Gürdal, Z.; Tatting, B.F.. "Progressive failure analysis of tow-placed, variable-stiffness composite panels". International Journal of Solids and Structures 44 25-26 (2007): 8493-8516. http://www.scopus.com/inward/record.url?eid=2-s2.0-35448996568&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2007.06.029
  157. Camanho, P.P.; Maimí, P.; Dávila, C.G.. "Prediction of size effects in notched laminates using continuum damage mechanics". Composites Science and Technology 67 13 (2007): 2715-2727. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548083519&partnerID=MN8TOARS.
    10.1016/j.compscitech.2007.02.005
  158. Camanho, P.P.. "Erratum to "CompTest 2006 special issue" (DOI:10.1016/j.compositesa.2006.09.010)". Composites Part A: Applied Science and Manufacturing 38 11 (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-35548932870&partnerID=MN8TOARS.
    10.1016/j.compositesa.2007.09.005
  159. Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Dávila, C.G.. "A continuum damage model for composite laminates: Part II - Computational implementation and validation". Mechanics of Materials 39 10 (2007): 909-919. http://www.scopus.com/inward/record.url?eid=2-s2.0-34250729118&partnerID=MN8TOARS.
    10.1016/j.mechmat.2007.03.006
  160. Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Dávila, C.G.. "A continuum damage model for composite laminates: Part I - Constitutive model". Mechanics of Materials 39 10 (2007): 897-908. http://www.scopus.com/inward/record.url?eid=2-s2.0-34250738416&partnerID=MN8TOARS.
    10.1016/j.mechmat.2007.03.005
  161. Pinho, S.T.; Camanho, P.P.. "A smeared crack model for simulating damage in laminated composites". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960067379&partnerID=MN8TOARS.
  162. Turon, A.; Costa, J.; Camanho, P.P.; Mayugo, J.A.. "Simulation of delamination propagation in composites under high-cycle fatigue using cohesive-zone models". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960060073&partnerID=MN8TOARS.
  163. Turon, A.; Costa, J.; Camanho, P.P.; Dávila, C.G.. "Simulation of delamination in composites under high-cycle fatigue". Composites Part A: Applied Science and Manufacturing 38 11 (2007): 2270-2282. http://www.scopus.com/inward/record.url?eid=2-s2.0-35548929392&partnerID=MN8TOARS.
    10.1016/j.compositesa.2006.11.009
  164. Camanho, P.P.. "CompTest 2006". Composites Part A: Applied Science and Manufacturing 38 11 (2007): 2245-2246. http://www.scopus.com/inward/record.url?eid=2-s2.0-35549005904&partnerID=MN8TOARS.
    10.1016/j.compositesa.2007.09.003
  165. Turon, A.; Dávila, C.G.; Camanho, P.P.; Costa, J.. "An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models". Engineering Fracture Mechanics 74 10 (2007): 1665-1682. http://www.scopus.com/inward/record.url?eid=2-s2.0-33847744149&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2006.08.025
  166. Moreira, P.M.G.P.; de Matos, P.F.P.; Camanho, P.P.; Pastrama, S.D.; de Castro, P.M.S.T.. "Stress intensity factor and load transfer analysis of a cracked riveted lap joint". Materials and Design 28 4 (2007): 1263-1270. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751515704&partnerID=MN8TOARS.
    10.1016/j.matdes.2005.12.014
  167. Melo, F.J.Q.; Carneiro, J.A.O.; Tavares, C.L.; Camanho, P.P.; De Castro, P.T.. "A simplified method for the impact test of beams using a pseudo-dynamic (PSD) process". Mechanics Research Communications 33 2 (2006): 190-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-27744478091&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2005.05.003
  168. Turon, A.; Camanho, P.P.; Costa, J.; Dávila, C.G.. "A damage model for the simulation of delamination in advanced composites under variable-mode loading". Mechanics of Materials 38 11 (2006): 1072-1089. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745960897&partnerID=MN8TOARS.
    10.1016/j.mechmat.2005.10.003
  169. Camanho, P.P.; Dávila, C.G.; Pinho, S.T.; Iannucci, L.; Robinson, P.. "Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear". Composites Part A: Applied Science and Manufacturing 37 2 (2006): 165-176. http://www.scopus.com/inward/record.url?eid=2-s2.0-32344447110&partnerID=MN8TOARS.
    10.1016/j.compositesa.2005.04.023
  170. Camanho, P.P.; Lambert, M.. "A design methodology for mechanically fastened joints in laminated composite materials". Composites Science and Technology 66 15 (2006): 3004-3020. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748577180&partnerID=MN8TOARS.
    10.1016/j.compscitech.2006.02.017
  171. Camanho, P.P.; Portela, P.M.; Melro, A.R.; Lambert, M.. "Enhanced design methods for mechanically fastened joints in composite structures". European Space Agency, (Special Publication) ESA SP 581 (2005): 161-170. http://www.scopus.com/inward/record.url?eid=2-s2.0-28444484337&partnerID=MN8TOARS.
  172. Camanho, P.P.; Tavares, C.M.L.; De Oliveira, R.; Marques, A.T.; Ferreira, A.J.M.. "Increasing the efficiency of composite single-shear lap joints using bonded inserts". Composites Part B: Engineering 36 5 (2005): 372-383. http://www.scopus.com/inward/record.url?eid=2-s2.0-17444401739&partnerID=MN8TOARS.
    10.1016/j.compositesb.2005.01.007
  173. Pinho, S.T.; Martins, H.B.; Camanho, P.P.; Santare, M.H.; de Castro, P.M.S.T.. "Residual stress field and reduction of stress intensity factors in cold-worked holes". Theoretical and Applied Fracture Mechanics 44 2 (2005): 168-177. http://www.scopus.com/inward/record.url?eid=2-s2.0-26844539647&partnerID=MN8TOARS.
    10.1016/j.tafmec.2005.06.005
  174. De Matos, P.F.P.; Moreira, P.M.G.P.; Camanho, P.P.; De Castro, P.M.S.T.. "Numerical simulation of cold working of rivet holes". Finite Elements in Analysis and Design 41 9-10 (2005): 989-1007. http://www.scopus.com/inward/record.url?eid=2-s2.0-17644413570&partnerID=MN8TOARS.
    10.1016/j.finel.2005.01.001
  175. Dávila, C.G.; Camanho, P.P.; Rose, C.A.. "Failure criteria for FRP laminates". Journal of Composite Materials 39 4 (2005): 323-345. http://www.scopus.com/inward/record.url?eid=2-s2.0-17444383104&partnerID=MN8TOARS.
    10.1177/0021998305046452
  176. Moreira, P.M.G.P.; De Matos, P.F.P.; Pinho, S.T.; Pastrama, S.D.; Camanho, P.P.; De Castro, P.M.S.T.. "The residual stress intensity factors for cold-worked cracked holes: A technical note". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 879-886. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143109045&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00768.x
  177. Camanho, P.P.; Davila, C.G.; Pinho, S.S.. "Fracture analysis of composite co-cured structural joints using decohesion elements". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 745-757. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143063548&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00695.x
  178. Xavier, J.C.; Garrido, N.M.; Oliveira, M.; Morais, J.L.; Camanho, P.P.; Pierron, F.. "A comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait". Composites Part A: Applied Science and Manufacturing 35 7-8 (2004): 827-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-2342485996&partnerID=MN8TOARS.
    10.1016/j.compositesa.2004.01.013
  179. Pinho, S.T.; Camanho, P.P.; De Moura, M.F.. "Numerical simulation of the crushing process of composite materials". International Journal of Crashworthiness 9 3 (2004): 263-276. http://www.scopus.com/inward/record.url?eid=2-s2.0-3242690049&partnerID=MN8TOARS.
    10.1533/ijcr.2004.0287
  180. Pinho, ST; Camanho, PP; de Moura, MF. "Numerical simulation of the crushing process of composite materials". INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2004):
    10.1533/ijrc.2004.0287
  181. Melo, F.J.Q.; Carneiro, J.A.O.; Camanho, P.P.; Tavares, C.L.; Fernandes, A.A.. "The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure". Strain 40 1 (2004): 13-23. http://www.scopus.com/inward/record.url?eid=2-s2.0-1642299970&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2003.00104.x
  182. Carneiro, J.O.; De Melo, F.J.Q.; Jalali, S.; Camanho, P.P.. "Analytical dynamic analysis of earthquake base-isolation structures using time history modal superposition". Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 218 1 (2004): 39-49. http://www.scopus.com/inward/record.url?eid=2-s2.0-2542551285&partnerID=MN8TOARS.
    10.1243/146441904322926931
  183. De Morais, A.B.; De Moura, M.F.; Gonçalves, J.P.M.; Camanho, P.P.. "Analysis of crack propagation in double cantilever beam tests of multidirectional laminates". Mechanics of Materials 35 7 (2003): 641-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037411001&partnerID=MN8TOARS.
    10.1016/S0167-6636(02)00289-2
  184. de Morais, AB; de Moura, MF; Goncalves, JPM; Camanho, PP. "Analysis of crack propagation in double cantilever beam tests of multidirectional laminates". MECHANICS OF MATERIALS (2003):
    10.1016/s0167-6636(02)00289-2
  185. Camanho, PP; Davila, CG; de Moura, MF. "Numerical simulation of mixed-mode progressive delamination in composite materials". JOURNAL OF COMPOSITE MATERIALS (2003):
    10.1177/002199803034505
  186. Camanho, P.P.; Dávila, C.G.; De Moura, M.F.. "Numerical simulation of mixed-mode progressive delamination in composite materials". Journal of Composite Materials 37 16 (2003): 1415-1438. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042527223&partnerID=MN8TOARS.
    10.1177/0021998303034505
  187. Dávila, C.G.; Camanho, P.P.. "Analysis of the effects of residual strains and defects on skin/stiffener debonding using decohesion elements". Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 1 (2003): 600-608. http://www.scopus.com/inward/record.url?eid=2-s2.0-0043014728&partnerID=MN8TOARS.
  188. Ferreira, A.J.M.; Camanho, P.P.; Marques, A.T.; Fernandes, A.A.. "Modelling of concrete beams reinforced with FRP re-bars". Composite Structures 53 1 (2001): 107-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035399984&partnerID=MN8TOARS.
    10.1016/S0263-8223(00)00182-3
  189. Teixeira, L.M.; Camanho, P.P.; Fernandes, A.A.. "Static and fatigue behaviour of aluminium bonded joints". European Space Agency, (Special Publication) ESA SP 468 (2001): 547-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035024084&partnerID=MN8TOARS.
  190. Camanho, P.P.; Matthews, F.L.. "Bonded inserts for CFRP bolted joints". European Space Agency, (Special Publication) ESA SP 468 (2001): 207-212. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035007536&partnerID=MN8TOARS.
  191. Ferreira, AJM; Camanho, PP; Marques, AT; Fernandes, AA. "Modelling of concrete beams reinforced with FRP re-bars". COMPOSITE STRUCTURES (2001):
    10.1016/s0263-8223(00)00182-3
  192. Dávila, C.G.; Camanho, P.P.; De Moura, M.F.. "Mixed-mode decohesion elements for analyses of progressive delamination". Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 3 (2001): 2277-2288. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035000724&partnerID=MN8TOARS.
  193. Camanho, P.P.; Matthews, F.L.. "Bonded metallic inserts for bolted joints in composite laminates". Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials: Design and Applications 214 1 (2000): 33-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038151167&partnerID=MN8TOARS.
    10.1243/1464420001544717
  194. Camanho, P.P.; Matthews, F.L.. "Delamination onset prediction in mechanically fastened joints in composite laminates". Journal of Composite Materials 33 10 (1999): 906-927. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032633182&partnerID=MN8TOARS.
  195. Camanho, P.P.; Matthews, F.L.. "A progressive damage model for mechanically fastened joints in composite laminates". Journal of Composite Materials 33 24 (1999): 2248-2280. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033279903&partnerID=MN8TOARS.
  196. Camanho, P.P.; Bowron, S.; Matthews, F.L.. "Failure mechanisms in bolted CFRP". Journal of Reinforced Plastics and Composites 17 3 (1998): 205-233. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031702387&partnerID=MN8TOARS.
  197. Camanho, P.P.; Matthews, F.L.. "Stress analysis and strength prediction of mechanically fastened joints in FRP: A review". Composites Part A: Applied Science and Manufacturing 28 6 (1997): 529-547. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030644554&partnerID=MN8TOARS.
  198. Camanho, PP; Matthews, FL. "Stress analysis and strength prediction of mechanically fastened joints in FRP: A review". COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (1997):
    10.1016/s1359-835x(97)00004-3
Thesis / Dissertation
  1. Camanho, Pedro Manuel Ponces Rodrigues de Castro. "Application of numerical methods to the strength of mechanically fastened joints in composite laminates". PhD, 1999. oai:digitool.fe.up.pt:12555.
  2. Camanho, Pedro Manuel Ponces Rodrigues de Castro. "Aplicação do efeito termoelástico à análise experimental de tensões". Master, 1995. oai:digitool.fe.up.pt:11757.

Other

Other output
  1. Modeling Fracture of Multidirectional Thin-Ply Laminates Using an Anisotropic Phase Field Formulation at the Macro-Scale. 2022. Mitrou, A.; Arteiro, A.; Reinoso, J.; Camanho, P.P.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85140867874&partnerID=MN8TOARS.
  2. Thin-ply polymer composite materials: A review. 2020. Arteiro, A; Furtado, C; Catalanotti, G; Linde, P; Camanho, PP.
    10.1016/j.compositesa.2020.105777
  3. Simulation of the Mechanical Response of Thin-Ply Composites: From Computational Micro-Mechanics to Structural Analysis. 2019. Arteiro, A; Catalanotti, G; Reinoso, J; Linde, P; Camanho, PP.
    10.1007/s11831-018-9291-2
  4. Simulation of delamination growth under high cycle fatigue using cohesive zone models. A cohesive zone model is proposed for the simulation of delamination growth in composite materials under high-cycle fatigue loading. The basis for the formulation is an interfacial constitutive law that links fracture mechanics and damage mechanics relating the evolution of the damage variable, d, with the crack growth rate, da/dN. The cohesive zone model is implemented in ABAQUS finite element co. 2008. Camanho,Pedro P.; Turon,Albert; Costa,Josep. http://www.scielo.mec.pt/scielo.php?script=sci_arttext&pid=S0870-83122008000100006.
  5. The residual stress intensity factors for cold-worked cracked holes: a technical note. (vol 27, pg 879, 2004). 2007. Moreira, PM; De Matos, PFP; Pinho, ST; Pastrama, SD; Camanho, PP; De Castro, MST.
    10.1111/j.1460-2695.2006.01112.x
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2019/05/25 Hybrid titanium-CFRP laminates for high-performance bolted joints
Universitat de Girona (Spain)
2019/03/01 Non-conventional polymer composite materials: expanding the design envelope of aerospace structures
University of Cambridge (Cambridge, United Kingdom)
2017 The role of numerical tools in the development of a new generation of polymer composite materials
(Nantes, France)
2017 The role of numerical tools in the development of a new generation of polymer composite materials
(Eindhoven)
2016 Analysis models for polymer composites across different length scales
(Munique, Germany)
2015 Constitutive modeling and experimental characterization of the non-linear stress-strain behavior of unidirectional carbon-epoxy under hight strain rates
(Denmark)
2015 Analysis models for polymer composite laminates
MIT (United States)
2014 Analysis models for polymer composite laminates at different length scales
(Fortaleza, Brazil)
2013/07/01 Meso-mechanical analysis of the deformation and fracture of polymer composites
King Abdullah University of Science and Technology (Thuwal, Saudi Arabia)
2013/03/07 Analysis models for polymer composite laminates
University of Oxford (Oxford, United Kingdom)
2013/02/28 Analysis models for polymer composite laminates
Ecole Nationale Superieure de Cachan (ENS-Cachan) (Cachan, France)
2013 Towards lighter composite structures: from analysis models to new materials
(Nantes, France)
2013 Mechanics of ultra-thin ply laminates
(Aalborg, Denmark)
2013 Analysis models for polymer composite materials throughout the length scales
(Bilbau, Spain)
2013 Mechanics of thin-ply laminates
(Porto, Portugal)
2012/12/04 Analysis models for advanced composite laminates
École Polytechnique Fédérale de Lausanne (EPFL) (Lausanne, Switzerland)
2012/10/23 Composite materials and their contribution to energy efficiency in aeronautics NATO AVT-209 Energy efficient technologies and concepts of operation
Academia da Força Aérea
2012/06/14 Notched response of thin ply laminates Seminar: Advances in mechanical behavior of carbon composite laminates with focus on spread tow fabrics and thin non crimp fabrics
Airbus (Hamburg)
2012 Structural integrity of polymer composite materials
(Bilbao, Spain)
2011/11/14 Structural integrity of polymer composite laminates
General Electric Global Research (Niskayuna NY, United States)
2011/09/19 Simulation of fracture in polymer composites
Daimler AG (Sindelfingen, Germany)
2011/07/13 Simulation of inelastic deformation and fracture of composites at different length scales
Monash University (Melbourne, Australia)
2011 Non-conventional composite laminates for lightweight aerospace structures
(Girona, Spain)
2011 Simulation of deformation and fracture of composites at different length scales
(Germany)
2010/05/05 Analysis models for composite materials
Airbus (Madrid, Spain)
2010/05/04 Non-conventional laminates: expanding the design envelope of composite structures
IMDEA (Madrid, Spain)
2010/04/30 Non-conventional laminates: expanding the design envelope composites
University of Limerick (Ireland)
2009/09/18 Analysis models for advanced composites
Daimler AG, Structural Simulation Group Research and Advanced Engineering (Sindelfingen, Germany)
2009/06/17 Simulation of intralaminar and interlaminar failure mechanisms in polymer-based composites Computational Modeling of Concrete, Masonry and Fiber-Reinforced Composites
TU Delft (Delft, Netherlands)
2009/05/26 Non-conventional composite laminates: expanding the design envelope
Universitat de Girona (Spain)
2009/01/07 Simulation of delamination using cohesive zone models Stanford Composites Design Group Annual Review Meeting
Stanford University (United States)
2009 Advanced lightweight structures based non non-conventional composite laminates
(Lisboa, Portugal)
2009 Non-conventional composite laminates: expanding the design envelope towards lighter structures
(Porto, Portugal)
2008/09/24 Materiais compósitos avançados: integridade estrutural e conceitos inovadores
Universidade de S. Carlos (Brazil)
2008/09/23 Materiais compósitos avançados: integridade estrutural e conceitos inovadores
Instituto Tecnológico de Aeronáutica (Brazil)
2008/08/07 Numerical simulation of fracture of polymer-based laminated composites
NASA Langley Research Centre (United States)
2008/06/19 Damage models for composites
Universitat de Girona (Spain)
2008/06/18 Failure criteria for composites
Universitat de Girona (Spain)
2008 A transversely isotropic damage model for composite laminates 3rd Meeting of the Failure Criteria Group of the Spanish Association for Composite Materials (AEMAC)
(Sevilha, Spain)
2007/07/20 Simulação computacional do dano e da fractura em compósitos laminados
Unidade Mecânica Experimental e Novos Materiais, Faculdade de Engenharia da Universidade do Porto (Portugal)
2007/04/25 Computational fracture mechanics for advanced composites
Department of Aeronautics, Imperial College London (United Kingdom)
2007 Simulation of damage and fracture of polymer-based laminated composites
(Porto, Portugal)
2006/10/30 Analytical and numerical simulation of damage in composite laminates
Department of Civil Engineering, University of British Columbia (Canada)
2006/10/27 Simulation of damage in advanced composite laminates
Department of Mechanical Engineering, University of Victoria (Canada)
2006/09/20 Simulation of damage and fracture in advanced composites
DLR - German Aerospace Center - Institute of Structures and Design (Stuttgart, Germany)
2006/07/17 State-of-the-art of joint analysis
DLR - German Aerospace Center - Institute of Composite Structures and Adaptive Systems (Braunschweig, Germany)
2006/06/22 Computational damage and fracture mechanics for advanced composites Seminário NAFEMS - Ibéria em Portugal, A Simulação no Desenvolvimento de Produtos, Componentes e Equipamentos Práticas e perspectivas industriais com FEA, CFD e MBS
(Porto, Portugal)
2006/04/24 Criterios de fallo para materiales compuestos
Universidad Carlos III (Madrid, Spain)
2006 Finite element modelling of fracture in composites: current status and future developments
(Roskilde, Denmark)
2005/11/29 Advances on bolted joints for composites Interreg III- Materials Network for the Atlantic Area
(Porto, Portugal)
2005/09/21 Progressive damage analysis for composite aerospace structures: state-of-the-art and technology barriers Abaqus Fracture Review Team Meeting
(Providence, United States)
2005 Advances in the simulation of damage and fracture of composites structures
(Pamplona, Spain)
2004/10/25 Integridade estrutural de materiais compósitos utilizados na indústria aeroespacial 8º Workshop Actividade Aeronáutica e Aeroespacial em Portugal
Instituto Superior Técnico (Lisboa, Portugal)
2004/05/06 Critérios de rotura intralaminar para compósitos laminados DDVVDD Seminar
INEGI (Porto, Portugal)
2004/04/16 Failure criteria for advanced composite materials in plane stress Seminarul Stiinifical Catedrei, Catedra Rezisten a Materialelor
Universitatea Politehnica Bucureti (Romania)
2004/03/23 Projecto de estruturas compósitas para a indústria aeronáutica Seminário ao Curso de Mestrado em Transportes
FEUP (Porto, Portugal)
2004/02/23 Daño en uniones entre compuestos laminados Avances en la modelización del daño en materiales compuestos
Universitat de Girona (Spain)
2004/02/20 Uniones entre compuestos laminados - estado de la arte Reunião da Associação Espanhola de Materiais Compósitos (AEMC)
Universidad de Sevilla (Spain)
2004/02/20 Diseño de compuestos laminados
Escuela Superior de Ingenieros, Universidad de Sevilla (Spain)
2004 Numerical simulation of damage in composites: current status and future developments
(Roskilde, Denmark)
2004 Development and applications of decohesion elements for the simulation of delamination in composite structures
(Roskilde, Denmark)
2003/10/15 Critérios de fallo en compuestos laminados
Universitat de Girona (Spain)
2003/10/09 Sistemas compósitos: aplicações, desafios e oportunidades de negócio
Ordem dos Engenheiros (Porto, Portugal)
2003/01/31 Composite bolted joints- current technology
European Aeronautic Defence and Space Company (EADS-ASTRIUM SPACE) (Stevenage, United Kingdom)
2003/01/30 Composite bolted joints- current technology
European Aeronautic Defence and Space Company (EADS-CASA ESPACIO) (Madrid, Spain)
2003/01/30 Simulation of delamination in composite materials using decohesion finite elements
European Aeronautic Defence and Space Company (EADS-CASA ESPACIO) (Madrid, Spain)
2003/01/10 Integridade estrutural de materiais compósitos Workshop de Mecânica da Madeira
Departamento de Engenharias, Universidade de Trás-os-Montes e Alto Douro (Portugal)
2002/05/23 Investigação aeroespacial no DEMEGI-FEUP
Associação Portuguesa de Aeronáutica e Espaço (APAE) (Lisboa, Portugal)
2000/09 A progressive damage model for mechanically fastened joints in composite laminates
NASA Langley Research Centre (Hampton, United States)
1999/06/18 A progressive damage model for bolted joints in CFRP
Air Force Research Laboratory - Space Vehicles Directorate (Albuquerque, United States)
1999/06/15 Bonded metallic inserts for bolted joints in CFRP
Air Force Research Laboratory- Materials and Manufacturing Directorate (Dayton, United States)
1999/06/14 A progressive damage model for bolted joints in CFRP
Air Force Research Laboratory - Materials and Manufacturing Directorate (Dayton, United States)
1998/05/13 Predicting the strength of bolted joints Imperial College - DERA Seminars on Composite Materials
Defence Evaluation and Research Agency (DERA) (Farnborough, United Kingdom)
1997/06/26 Damage progression in CFRP bolted joints
Imperial College of Science, Technology and Medicine (London, United Kingdom)
1996/03/28 Finite element analysis of mechanically fastened joints in composite materials
Imperial College of Science, Technology and Medicine (London, United Kingdom)
1995/02/09 Stress analysis of a composite bumper using the thermoelastic effect
Composite Systems and Adhesion Research Group of the Free University of Brussels (Brussels, Belgium)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2016 - 2020 Damage and fracture in advanced composite laminates: thin-ply and nano-engineered composites
Supervisor of Carolina Furtado
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2020 Mechanics of deformation and failure of fibre hybrid composites
Supervisor of Rodrigo Tavares
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2013 - 2017 Analysis of composite bolted joints under out-of-plane loads and extreme temperatures
Supervisor of Ricardo Pinto
 Doctoral Program in Mechanical Engineering (PhD)
2012 - 2016 Hybrid carbon fibre/metal laminates for high performance bolted joints in aeronautical applications
Supervisor of João Lopes
2012 - 2016 Structural mechanics of thin-ply laminated composites
Supervisor of Albertino Arteiro
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2012 - 2016 Experimental characterization and numerical modeling of the mechanical response of biaxial braided composites
Co-supervisor of Jörg A. Cichosz
Technische Universität München Department of Mechanical Engineering, Germany
2010 - 2014 Anisotropic material models for fiber reinforced polymers
Co-supervisor of Matthias Vogler
Leibniz Universität Hannover Fakultät für Bauingenieurwesen und Geodäsie, Germany
2010 - 2014 Hybrid CFRP/titanium bolted joints
Supervisor of Cláudia Cardoso
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2009 - 2013 Stress gradient effects in laminated composites
Supervisor of Gulsum Hilal Ercin
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2007 - 2011 Analytical and numerical modelling of damage and fracture of advanced composites
Supervisor of António Melro
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2007 - 2011 Multi-material joints for high-speed train structures
Supervisor of Giuseppe Catalanotti
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2007 - 2011 Simulation of interlaminar and intralaminar damage in polymer-based composites for aeronautical applications under impact loading
Co-supervisor of Emili Juan
Universitat de Girona, Spain
2007 - 2011 Mechanical response of advanced composites under high strain rates
Supervisor of Hannes Koerber
 Doctoral Program in Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2004 - 2009 Damage and failure of non-conventional composite laminates
Co-supervisor of Claudio Saul Faria Lopes
Technische Universiteit Delft, Netherlands
2003 - 2007 Modelización constitutiva y computacional del daño y la fractura de materiales compuestos
Supervisor of Pere Maimi
Universitat de Girona, Spain
2002 - 2006 Simulation of delamination in composites under quasi-static and fatigue loading using cohesive zone models
Supervisor of Albert Turon
Universitat de Girona, Spain
Distinctions

Award

2024 Academie Medal
Académie de l'Air et de l'Espace, France
2024 Membro Efetivo
2020 Prémio de Excelência Científica da Universidade do Porto
Universidade do Porto, Portugal
2007 Prémio de Incentivo à Investigação
Universidade do Porto Faculdade de Engenharia, Portugal
2006 NASA H.J.E. Reid Award for Outstanding Scientific Paper
NASA, United States
2006 Jovem Investigador em Mecânica Aplicada e Computacional 2005

Title

2024 Honorary Professor
Nanjing University of Aeronautics and Astronautics, China
2023 Sócio Correspondente
Academia das Ciências de Lisboa, Portugal
2020 Fellow of the Royal Aeronautical Society
Royal Aeronautical Society, United Kingdom

Other distinction

2021 Member of Editorial Board, International Journal of Solids and Structures
Elsevier BV, Netherlands
2016 Member of the Council
2014 Member of the Engineering Panel of the European Research Council
European Research Council, Belgium
2014 Visiting Professor
2013 Membro do Corpo Editorial da revista European Journal of Computational Mechanics.
2012 Prémio de Incentivo à Investigação
Universidade do Porto Faculdade de Engenharia, Portugal
2012 Membro do corpo editorial da revista Composites Part A: Applied Science and Manufacturing.
2010 Member of the Council
Europen Mechanics Society, United Kingdom
2008 Visting Scientist
NASA Langley Research Center, United States
2007 Visiting Scientist
NASA Langley Research Center, United States
2007 Chairman of the ECCOMAS Thematic Conference Mechanical Response of Composites
2007 Membro do corpo editorial da revista Computers, Materials and Continua.
2006 Nominated for the NASA Richard T. Whitcomb Technology Transfer Award
NASA, United States
2006 Visiting Scientist
NASA Langley Research Center, United States
2006 Chairman of the CompTest 2006 International Conference
2005 Visiting Scientist
NASA Langley Research Center, United States
2005 Royal Society Visiting Professor
Imperial College London, United Kingdom
2004 Visiting Scientist
2003 Visitng Scientist
2002 Visiting Scientist
2001 Visiting Scientist
2000 Visiting Scientist
1999 Window-on-Science Visitor