???global.info.a_carregar???
Jose Outeiro is Full Professor of Digital and Sustainable Manufacturing at the Department of Mechanical Engineering and Engineering Science of the University of North Carolina (UNC) at Charlotte (USA); Associate Professor, outstanding class with habilitation (tenure) at the Laboratory of Materials and Processes of Arts et Metiers Institute of Technology (France); Visiting Professor of the Institute for Production Engineering (wbk) of the Karlsruhe Institute of technology (Germany); Visiting Professor of the Institute for Sustainable Manufacturing of the University of Kentucky (USA); Assistant Professor at the Catholic University of Portugal (Portugal). Dr. Outeiro is a Fellow member of CIRP (The International Academy for Production Engineering), serving the Academy as Chairman of CIRP Conferences and of the CIRP Collaborative Working Groups. Dr. Outeiro is also a member of the Society of Manufacturing Engineers (SME). He is also a member of the Strategic Planning Committee (SPC) of the Charlotte Artificial Intelligence (AI) Institute (CLT AI Institute), and a member of the UNC Charlotte’s AI Research Council. Dr. Outeiro was a member of the Franco-German Institute of Industry of the Future, serving at the Scientific Board and as a French coordinator on Advanced Manufacturing Processes. He was also (Co)Vice-President for research at the University of Burgundy-Franche-Comté, member of the French Manufacturing 21 association, member of the French Intercut network, member of the French Titanium Association, member of the Scientific Boards of the Faculty of Engineering and of Beiras Regional Center of Catholic University of Portugal, and Director of Undergraduate Studies in Mechanical Engineering of the same university. Dr. Outeiro develops his research activities on manufacturing processes. His research topics are on: Digital Manufacturing; Sustainable Manufacturing; Multi-physical/multi-scale modeling, simulation, and optimization of manufacturing processes; Digital Twin; Surface integrity and its influence on the functional performance and lifespan of components; Development of advanced manufacturing processes including hybrid processes. Dr. Outeiro was the chairman/ co-chairman of the 13th and 16th CIRP Conferences on Modelling of Machining Operations (CMMO), and of the 6th CIRP Conference on Surface Integrity (CSI). He also organized several sessions on conferences, and a seminar series on “Engineering at XXI Century” at the Faculty of Engineering of Catholic University of Portugal. Dr. Outeiro is member of several evaluation panels, including the National Science Foundation (NSF), the European Science Foundation (ESF), the National Research Agency (ANR), and the Foundation for Science and Technology (FCT). He is Associate Technical Editor of the journals “Advances in Industrial and Manufacturing Engineering” and “Machining Science and Technology”, and member of the Editorial Board of several international journals. He has also been a member of several Scientific Committees of conferences. He has published more than 200 scientific publications, including papers in journals, conference proceedings, books, and chapters. He has also delivered presentations, lectures and seminars in Europe and the USA. Dr. Outeiro has coordinated and participated in national and international projects in cooperation with academic and industrial partners in Europe, USA, and Asia. Full CV available at: https://webpages.charlotte.edu/jmart405/JC_Outeiro_CV.pdf
Read full resume ↓
Identification

Personal identification

Full name
Jose Carlos Martins do Outeiro

Citation names

  • Outeiro, Jose

Author identifiers

Ciência ID
AE15-0BC0-3F41
ORCID iD
0000-0003-0931-4973
Google Scholar ID
https://scholar.google.com/citations?user=__yDb3QAAAAJ&hl=fr

Email addresses

  • jc.outeiro@charlotte.edu (Professional)

Telephones

Telephone
  • (1) 7046877213 (Professional)

Addresses

  • 164 Duke Centennial Hall, 9201 University City Blvd., 28223, Charlotte, North Carolina, United States (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Advanced (C1) Advanced (C1) Advanced (C1) Upper intermediate (B2) Advanced (C1)
French Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2017/06/26
Concluded
 Mechanical Engineering (Título de Agregado)
University of Grenoble Alpes, France
1997 - 2003
Concluded
 Engenharia Mecânica (Doutoramento)
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
1994 - 1996
Concluded
 Engenharia Mecânica (Mestrado)
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
1988 - 1993
Concluded
 Engenharia Mecânica (Licenciatura)
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2023 - Current Full Professor (University Teacher) UNC Charlotte, United States
UNC Charlotte The William States Lee College of Engineering, United States
2012 - 2023 Associate Professor (University Teacher) École Nationale Supérieure d'Arts et Métiers, France
École Nationale Supérieure d'Arts et Métiers - Campus de Cluny, France
2007 - 2012 Assistant Professor (University Teacher) Universidade Católica Portuguesa, Portugal
Universidade Católica Portuguesa Campus Sintra, Portugal
2003 - 2007 Assistant Professor (University Teacher) Universidade Católica Portuguesa, Portugal
Universidade Católica Portuguesa Centro Regional de Viseu, Portugal
1995 - 2003 Assistant (University Teacher) Universidade Católica Portuguesa, Portugal
Universidade Católica Portuguesa Centro Regional de Viseu, Portugal
Projects

Contract

Designation Funders
2025 - 2029 Lithium Metal Anode for Advanced Batteries
DOE 3099-1504
Co-Principal Investigator (Co-PI)
UNC Charlotte, United States
 US Department of Energy
Ongoing
Outputs

Publications

Book
  1. Caruso, S.; Outeiro, J.C.; Umbrello, D.; Batista, A.C.. Residual stresses in machining of AISI 52100 steel under dry and cryogenic conditions: A brief summary. 2014.
    10.4028/www.scientific.net/KEM.611-612.1236
  2. Outeiro, J.C.; Batista, A.C.; Marques, M.J.. Residual stresses induced by dry and cryogenic cooling during machining of AZ31B magnesium alloy. 2014.
    10.4028/www.scientific.net/AMR.996.658
  3. Outeiro, J.C.. Preface. 2011.
  4. Astakhov, V.P.; Outeiro, J.C.. Metal cutting mechanics, finite element modelling. 2008.
    10.1007/978-1-84800-213-5_1
  5. Outeiro, J.C.; Umbrello, D.; M'Saoubi, R.. Experimental and FEM analysis of cutting sequence on residual stresses in machined layers of AISI 316L steel. 2006.
  6. Marques, M.J.; Outeiro, J.; Dias, A.M.; Saoubi, R.M.; Chandrasekaran, H.. Surface integrity of H13 ESR mould steel milled by carbide and CBN tools. 2006.
  7. Outeiro, J.C.; Dias, A.M.. Influence of work material properties on residual stresses and work hardening induced by machining. 2006.
  8. Outeiro, J.C.; Dias, A.M.; Lebrun, J.-L.; Astakhov, V.P.. Residual stresses induced by machining of a plain carbon steel using coated and uncoated commercial tungsten carbide tools. 2002.
Book chapter
  1. J.C. Outeiro. "Residual stresses in machining". 297-360. Elsevier, 2020.
    10.1016/b978-0-12-818232-1.00011-4
Conference paper
  1. Denguir, L.A.; Outeiro, J.C.; Fromentin, G.; Vignal, V.; Besnard, R.. "Orthogonal Cutting Simulation of OFHC Copper Using a New Constitutive Model Considering the State of Stress and the Microstructure Effects". 2016.
    10.1016/j.procir.2016.03.208
  2. Poulachon, G.; Outeiro, J.; Ramirez, C.; André, V.; Abrivard, G.. "Hole Surface Topography and Tool Wear in CFRP Drilling". 2016.
    10.1016/j.procir.2016.02.348
  3. Nobre, J.P.; Outeiro, J.C.. "Evaluating residual stresses induced by drilling of Ti-6Al-4V alloy by using an experimental-numerical methodology". 2015.
    10.1016/j.procir.2015.03.062
  4. Zhang, Y.; Outeiro, J.C.; Mabrouki, T.. "On the selection of Johnson-Cook constitutive model parameters for Ti-6Al-4V using three types of numerical models of orthogonal cutting". 2015.
    10.1016/j.procir.2015.03.052
  5. Nasr, M.N.A.; Outeiro, J.C.. "Sensitivity analysis of cryogenic cooling on machining of magnesium alloy AZ31B-O". 2015.
    10.1016/j.procir.2015.03.030
  6. Denguir, L.; Outeiro, J.; Fromentin, G.; Vignal, V.; Besnard, R.. "Influence of cutting process mechanics on surface integrity and electrochemical behavior of OFHC copper". 2014.
    10.1016/j.procir.2014.04.032
  7. Giraud, E.; Rossi, F.; Germain, G.; Outeiro, J.C.. "Constitutive modelling of AZ31B-O magnesium alloy for cryogenic machining". 2013.
    10.1016/j.procir.2013.06.144
  8. Outeiro, J.C.; Rossi, F.; Fromentin, G.; Poulachon, G.; Germain, G.; Batista, A.C.. "Process mechanics and surface integrity induced by dry and cryogenic machining of AZ31B-O magnesium alloy". 2013.
    10.1016/j.procir.2013.06.138
  9. Outeiro, J.C.; Costes, J.-P.; Kornmeier, J.R.. "Cyclic variation of residual stress induced by tool vibration in machining operations". 2013.
    10.1016/j.procir.2013.06.139
  10. Deshpande, A.; Yang, S.; Puleo, D.; Pienkowski, D.; Dillon Jr., O.; Outeiro, J.; Jawahir, I.S.. "Minimized wear and debris generation through optimized machining of Co-Cr-Mo alloys for use in metal-on-metal hip implants". 2012.
    10.1115/MSEC2012-7260
  11. Umbrello, D.; Pu, Z.; Caruso, S.; Outeiro, J.C.; Jayal, A.D.; Dillon Jr., O.W.; Jawahir, I.S.. "The effects of cryogenic cooling on surface integrity in hard machining". 2011.
    10.1016/j.proeng.2011.11.127
  12. Pu, Z.; Outeiro, J.C.; Batista, A.C.; Dillon Jr., O.W.; Puleo, D.A.; Jawahir, I.S.. "Surface integrity in dry and cryogenic machining of AZ31B Mg alloy with varying cutting edge radius tools". 2011.
    10.1016/j.proeng.2011.11.113
  13. Caruso, S.; Umbrello, D.; Outeiro, J.C.; Filice, L.; Micari, F.. "An experimental investigation of residual stresses in hard machining of AISI 52100 steel". 2011.
    10.1016/j.proeng.2011.11.081
  14. Outeiro, J.C.; Dillon, O.W.; Jawahir, I.S.. "On designing for enhanced product sustainability by considering the induced residual stresses in machining operations". 2008.
    10.1115/IMECE2007-43519
  15. Umbrello, D.; Rizzuti, S.; Outeiro, J.C.; Shivpuri, R.. "Modeling of the flow stress for AISI H13 tool steel during hard machining processes". 2007.
  16. Outeiro, J.C.; Umbrello, D.; Pina, J.C.; Rizzuti, S.. "Modelling of tool wear and residual stress during machining of AISI H13 tool steel". 2007.
    10.1063/1.2740966
Journal article
  1. Xiang Xu; José Outeiro; Jun Zhang; Xiaojie Li; Wanhua Zhao. "A framework to efficiently simulate the cyclic variation of the residual stresses induced by chip formation in machining of Ti-6Al-4 V alloy". CIRP Journal of Manufacturing Science and Technology (2024): http://dx.doi.org/10.1016/j.cirpj.2024.03.008.
    10.1016/j.cirpj.2024.03.008
  2. Necati Uçak; José Outeiro; Adem Çiçek; Kubilay Aslantas. "Comparative analysis of micro-milling performances of conventionally and additively manufactured Ti6Al4V alloys: Experimental investigation and 3D modelling". CIRP Journal of Manufacturing Science and Technology (2024): http://dx.doi.org/10.1016/j.cirpj.2024.05.003.
    10.1016/j.cirpj.2024.05.003
  3. Cheng HU; Jose Carlos Martins do Outeiro; Kejia Zhuang; Hélène L. Elias-Birembaux. "Selection of the numerical formulation for modeling the effect of tool cutting edge microgeometries in machining of Ti6Al4V titanium alloy". Simulation Modelling Practice and Theory 129 (2023): 102816-102816. http://dx.doi.org/10.1016/j.simpat.2023.102816.
    10.1016/j.simpat.2023.102816
  4. Yutao ZHANG; Jose Carlos Martins do Outeiro; Corinne NOUVEAU; Bertrand Marcon; Lamice A. Denguir. "Tribological Analysis of Several Coatings under Flood and Cryogenic Cooling Conditions". Applied Sciences (2023): http://dx.doi.org/10.3390/app132111743.
    10.3390/app132111743
  5. Necati Uçak; Adem Çiçek; José Outeiro; Kubilay Aslantas; Baris Çetin. "Constitutive modelling of Ti6Al4V alloy fabricated by laser powder bed fusion and its application to micro cutting simulation". Mechanics of Materials 185 (2023): 104756-104756. http://dx.doi.org/10.1016/j.mechmat.2023.104756.
    10.1016/j.mechmat.2023.104756
  6. Navneet Khanna; Jay Airao; Pratham Maheshwari; Chandrakant K. Nirala; Jose Outeiro. "Life cycle assessment to reduce environmental and carbon footprints of ultrasonic-assisted turning". Sustainable Materials and Technologies 37 (2023): e00674-e00674. http://dx.doi.org/10.1016/j.susmat.2023.e00674.
    10.1016/j.susmat.2023.e00674
  7. Wenyu Cheng; Jose Outeiro; Jean-Philippe Costes; Habib Karouni; Theo Dorlin; Rachid M’Saoubi. "3D modeling of turning of Ti-6Al-4V titanium alloy using a constitutive model considering the state of stress". Machining Science and Technology 27 4 (2023): 422-451. http://dx.doi.org/10.1080/10910344.2023.2241140.
    10.1080/10910344.2023.2241140
  8. Mohamed Ali Louhichi; Gerard Poulachon; Philippe Lorong; José Outeiro; Eric Monteiro; Dominique Cotton. "Modeling and validation of residual stresses induced by heat treatment of AA 7075-T6 samples toward the prediction of part distortion". Machining Science and Technology 27 3 (2023): 247-267. http://dx.doi.org/10.1080/10910344.2023.2215309.
    10.1080/10910344.2023.2215309
  9. Abedalkader Alkhouzaam; Marwan Khraisheh; Jose Outeiro. "Remanufacturing and reuse of thin film composite (TFC) membranes through surface modification using bio-inspired eco-friendly coating". CIRP Annals 72 1 (2023): 481-484. http://dx.doi.org/10.1016/j.cirp.2023.04.016.
    10.1016/j.cirp.2023.04.016
  10. Guang-Chao Nie; Xiao-Ming Zhang; Zheng-Yan Yang; Dong Zhang; José Outeiro; Hai-Gen Liu; Han Ding. "Effects of Cutting Edge Radius on Surface Integrity in Machining of Nickel-Based Cast Superalloy: An In Situ Imaging Approach". Journal of Manufacturing Science and Engineering 144 12 (2022): http://dx.doi.org/10.1115/1.4055148.
    10.1115/1.4055148
  11. José Outeiro; Wenyu Cheng; Francisco Chinesta; Amine Ammar. "Modelling and Optimization of Machining of Ti-6Al-4V Titanium Alloy Using Machine Learning and Design of Experiments Methods". Journal of Manufacturing and Materials Processing (2022): https://doi.org/10.3390/jmmp6030058.
    10.3390/jmmp6030058
  12. Wenyu Cheng; Jose Carlos Martins do Outeiro. "Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress". The International Journal of Advanced Manufacturing Technology 119 7-8 (2022): 4329-4347. http://dx.doi.org/10.1007/s00170-021-08446-9.
    10.1007/s00170-021-08446-9
  13. Guangchao Nie; Zhengyan Yang; Dong Zhang; Xiaoming Zhang; José Outeiro; Han Ding. "Dynamics of chip formation during the cutting process using imaging techniques: A review". International Journal of Mechanical System Dynamics 2 1 (2022): 27-49. http://dx.doi.org/10.1002/msd2.12032.
    10.1002/msd2.12032
  14. Cheng HU; Jue Wang; Liangliang Lin; Jian Weng; José Outeiro; Kejia Zhuang. "Characterization of material flow mechanism for chamfered tools utilizing coupled slip-line-slab method". Journal of Materials Processing Technology 300 (2022): 117424-117424. http://dx.doi.org/10.1016/j.jmatprotec.2021.117424.
    10.1016/j.jmatprotec.2021.117424
  15. Karuna Dhale; Nilanjan Banerjee; José Outeiro; Ramesh Kumar Singh. "Investigation of the softening behavior in severely deformed micromachined sub-surface of Zr-based bulk metallic glass via nanoindentation". Journal of Non-Crystalline Solids 576 (2022): 121280-121280. http://dx.doi.org/10.1016/j.jnoncrysol.2021.121280.
    10.1016/j.jnoncrysol.2021.121280
  16. Mohamed Ali Louhichi; Gerard Poulachon; Philippe Lorong; José Outeiro; Eric Monteiro. "Experimental and simulative determination of residual stress during heat treatment of 7075-T6 aluminum". Procedia CIRP 108 (2022): 82-87. http://dx.doi.org/10.1016/j.procir.2022.03.018.
    10.1016/j.procir.2022.03.018
  17. Xiang Xu; José Outeiro; Jun Zhang; Binbin Xu; Wanhua Zhao; Viktor Astakhov. "Machining simulation of Ti6Al4V using coupled Eulerian-Lagrangian approach and a constitutive model considering the state of stress". Simulation Modelling Practice and Theory 110 (2021): 102312-102312. http://dx.doi.org/10.1016/j.simpat.2021.102312.
    10.1016/j.simpat.2021.102312
  18. L.A. Denguir; J.C. Outeiro; G. Fromentin. "Multi-physical analysis of the electrochemical behaviour of OFHC copper surfaces obtained by orthogonal cutting". Corrosion Engineering, Science and Technology 56 2 (2021): 189-198. http://dx.doi.org/10.1080/1478422x.2020.1836879.
    10.1080/1478422x.2020.1836879
  19. Francesco Careri; Stano Imbrogno; Domenico Umbrello; Moataz M. Attallah; José Outeiro; António C. Batista. "Machining and heat treatment as post-processing strategies for Ni-superalloys structures fabricated using direct energy deposition". Journal of Manufacturing Processes 61 (2021): 236-244. http://dx.doi.org/10.1016/j.jmapro.2020.11.024.
    10.1016/j.jmapro.2020.11.024
  20. Jun Zhang; Zhechao Liu; Hongguang Liu; Xiang Xu; José Outeiro; Wanhua Zhao. "Fragmented chip formation mechanism in high-speed cutting from the perspective of stress wave effect". CIRP Annals 70 1 (2021): 53-56. http://dx.doi.org/10.1016/j.cirp.2021.03.016.
    10.1016/j.cirp.2021.03.016
  21. Xiang Xu; Jun Zhang; José Outeiro; Binbin Xu; Wanhua Zhao. "Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining". Journal of Materials Processing Technology 286 (2020): 116834-116834. http://dx.doi.org/10.1016/j.jmatprotec.2020.116834.
    10.1016/j.jmatprotec.2020.116834
  22. A. Attanasio; E. Ceretti; J. Outeiro; G. Poulachon. "Numerical simulation of tool wear in drilling Inconel 718 under flood and cryogenic cooling conditions". Wear 458-459 (2020): 203403-203403. http://dx.doi.org/10.1016/j.wear.2020.203403.
    10.1016/j.wear.2020.203403
  23. Jun Zhang; Xiang Xu; José Outeiro; Hongguang Liu; Wanhua Zhao. "Simulation of Grain Refinement Induced by High-Speed Machining of OFHC Copper Using Cellular Automata Method". Journal of Manufacturing Science and Engineering 142 9 (2020): http://dx.doi.org/10.1115/1.4047431.
    10.1115/1.4047431
  24. Guang-Chao Nie; Ke Zhang; Jose Outeiro; Serafino Caruso; Domenico Umbrello; Han Ding; Xiao-Ming Zhang. "Plastic Strain Threshold Determination for White Layer Formation in Hard Turning of AISI 52100 Steel Using Micro-Grid Technique and Finite Element Simulations". Journal of Manufacturing Science and Engineering 142 3 (2020): http://dx.doi.org/10.1115/1.4045798.
    10.1115/1.4045798
  25. Iheb Cherif; Dominique Cotton; Gerard Poulachon; Jose Outeiro; Alexandre Brosse; Joana Rebelo Kornmeier. "Instrumented clamping device and numerical simulations to study machining distortion". The International Journal of Advanced Manufacturing Technology 105 7-8 (2019): 3093-3103. http://dx.doi.org/10.1007/s00170-019-04510-7.
    10.1007/s00170-019-04510-7
  26. Tristan Régnier; Bertrand Marcon; José Outeiro; Guillaume Fromentin; Alain D’Acunto; Arnaud Crolet. "Investigations on exit burr formation mechanisms based on digital image correlation and numerical modeling". Machining Science and Technology 23 6 (2019): 925-950. http://dx.doi.org/10.1080/10910344.2019.1636274.
    10.1080/10910344.2019.1636274
  27. Xiao-Ming Zhang; Ke Zhang; Dong Zhang; Jose Outeiro; Han Ding. "New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process". Journal of Manufacturing Science and Engineering 141 10 (2019): http://dx.doi.org/10.1115/1.4044251.
    10.1115/1.4044251
  28. Wenyu Cheng; Jose Outeiro; Jean-Philippe Costes; Rachid M'Saoubi; Habib Karaouni; Viktor Astakhov. "A constitutive model for Ti6Al4V considering the state of stress and strain rate effects". Mechanics of Materials 137 (2019): 103103-103103. http://dx.doi.org/10.1016/j.mechmat.2019.103103.
    10.1016/j.mechmat.2019.103103
  29. Karuna Dhale; Nilanjan Banerjee; Ramesh Kumar Singh; José C. Outeiro. "Investigation on chip formation and surface morphology in orthogonal machining of Zr-based bulk metallic glass". Manufacturing Letters 19 (2019): 25-28. http://dx.doi.org/10.1016/j.mfglet.2019.01.002.
    10.1016/j.mfglet.2019.01.002
  30. Iheb Cherif; José Outeiro; Dominique Cotton; Gérard Poulachon; Guillaume Charrondiere; Alexandre Brosse. "Effects of toolpath and clamping strategies in machining distortion of stainless-steel parts". Procedia CIRP 82 (2019): 427-431. http://dx.doi.org/10.1016/j.procir.2019.04.065.
    10.1016/j.procir.2019.04.065
  31. Tristan Régnier; Guillaume Fromentin; Alain D'Acunto; José Outeiro; Bertrand Marcon; Arnaud Crolet. "Phenomenological Study of Multivariable Effects on Exit Burr Criteria During Orthogonal Cutting of AlSi Alloys Using Principal Components Analysis". Journal of Manufacturing Science and Engineering 140 10 (2018): http://dx.doi.org/10.1115/1.4040623.
    10.1115/1.4040623
  32. Tristan Régnier; Guillaume Fromentin; Bertrand Marcon; José Outeiro; Alain D’Acunto; Arnaud Crolet; Timothée Grunder. "Fundamental study of exit burr formation mechanisms during orthogonal cutting of AlSi aluminium alloy". Journal of Materials Processing Technology 257 (2018): 112-122. http://dx.doi.org/10.1016/j.jmatprotec.2018.02.037.
    10.1016/j.jmatprotec.2018.02.037
  33. P. Lequien; G. Poulachon; J.C. Outeiro; J. Rech. "Hybrid experimental/modelling methodology for identifying the convective heat transfer coefficient in cryogenic assisted machining". Applied Thermal Engineering 128 (2018): 500-507. http://dx.doi.org/10.1016/j.applthermaleng.2017.09.054.
    10.1016/j.applthermaleng.2017.09.054
  34. L.A. Denguir; J.C. Outeiro; G. Fromentin; V. Vignal; R. Besnard. "A physical-based constitutive model for surface integrity prediction in machining of OFHC copper". Journal of Materials Processing Technology 248 (2017): 143-160. http://dx.doi.org/10.1016/j.jmatprotec.2017.05.009.
    10.1016/j.jmatprotec.2017.05.009
  35. ismail lazoglu; Gérard Poulachon; Christophe Ramirez; Mohammad Akmal; Bertrand Marcon; Frédéric Rossi; José C. Outeiro; MICHAEL KREBS. "Thermal analysis in Ti-6Al-4V drilling". CIRP Annals 66 1 (2017): 105-108. http://dx.doi.org/10.1016/j.cirp.2017.04.020.
    10.1016/j.cirp.2017.04.020
  36. Campocasso, S.; Poulachon, G.; Bissey-Breton, S.; Costes, J.P.; Outeiro, J.C.. "Towards cutting force evaluation without cutting tests". CIRP Annals - Manufacturing Technology (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85018696027&partnerID=MN8TOARS.
    10.1016/j.cirp.2017.04.023
  37. Shreyes N. Melkote; Wit Grzesik; Jose Outeiro; Joel Rech; Volker Schulze; Helmi Attia; Pedro-J. Arrazola; Rachid M’Saoubi; Christopher Saldana. "Advances in material and friction data for modelling of metal machining". CIRP Annals 66 2 (2017): 731-754. http://dx.doi.org/10.1016/j.cirp.2017.05.002.
    10.1016/j.cirp.2017.05.002
  38. Baizeau, T.; Rossi, F.; Poulachon, G.; Outeiro, J.C.. "Prediction of surface integrity using Flamant–Boussinesq analytical model". CIRP Annals - Manufacturing Technology 65 1 (2016): 81-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-84971611895&partnerID=MN8TOARS.
    10.1016/j.cirp.2016.04.043
  39. Outeiro, J.C.; Umbrello, D.; M'Saoubi, R.; Jawahir, I.. "Evaluation of present numerical models for predicting metal cutting performance and residual stresses". Machining Science and Technology 19 2 (2015): 183-216. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929146969&partnerID=MN8TOARS.
    10.1080/10910344.2015.1018537
  40. Outeiro, J.C.; Campocasso, S.; Denguir, L.A.; Fromentin, G.; Vignal, V.; Poulachon, G.. "Experimental and numerical assessment of subsurface plastic deformation induced by OFHC copper machining". CIRP Annals - Manufacturing Technology 64 1 (2015): 53-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-84933673472&partnerID=MN8TOARS.
    10.1016/j.cirp.2015.04.080
  41. Outeiro, J.C.; Lenoir, P.; Bosselut, A.. "Thermo-mechanical effects in drilling using metal working fluids and cryogenic cooling and their impact in tool performance". Production Engineering 9 4 (2015): 551-562. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943665983&partnerID=MN8TOARS.
    10.1007/s11740-015-0619-6
  42. Outeiro, J.C.. "Surface integrity predictions and optimisation of machining conditions in the turning of AISI H13 tool steel". International Journal of Machining and Machinability of Materials 15 1-2 (2014): 122-134. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893949343&partnerID=MN8TOARS.
    10.1504/IJMMM.2014.059189
  43. Nobre, J.P.; Stiffel, J.-H.; Nau, A.; Outeiro, J.C.; Batista, A.C.; Van Paepegem, W.; Scholtes, B.. "Induced drilling strains in glass fibre reinforced epoxy composites". CIRP Annals - Manufacturing Technology 62 1 (2013): 87-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878892273&partnerID=MN8TOARS.
    10.1016/j.cirp.2013.03.089
  44. Pu, Z.; Song, G.-L.; Yang, S.; Outeiro, J.C.; Dillon, O.W.; Puleo, D.A.; Jawahir, I.S.. "Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy". Corrosion Science 57 (2012): 192-201. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862828298&partnerID=MN8TOARS.
    10.1016/j.corsci.2011.12.018
  45. Pu, Z.; Outeiro, J.C.; Batista, A.C.; Dillon Jr., O.W.; Puleo, D.A.; Jawahir, I.S.. "Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components". International Journal of Machine Tools and Manufacture 56 (2012): 17-27. http://www.scopus.com/inward/record.url?eid=2-s2.0-84855819033&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2011.12.006
  46. M'Saoubi, R.; Larsson, T.; Outeiro, J.; Guo, Y.; Suslov, S.; Saldana, C.; Chandrasekar, S.. "Surface integrity analysis of machined Inconel 718 over multiple length scales". CIRP Annals - Manufacturing Technology 61 1 (2012): 99-102. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861630874&partnerID=MN8TOARS.
    10.1016/j.cirp.2012.03.058
  47. Jawahir, I.S.; Brinksmeier, E.; M'Saoubi, R.; Aspinwall, D.K.; Outeiro, J.C.; Meyer, D.; Umbrello, D.; Jayal, A.D.. "Surface integrity in material removal processes: Recent advances". CIRP Annals - Manufacturing Technology 60 2 (2011): 603-626. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051673337&partnerID=MN8TOARS.
    10.1016/j.cirp.2011.05.002
  48. Umbrello, D.; Outeiro, J.C.; M'Saoubi, R.; Jayal, A.D.; Jawahir, I.S.. "A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel". CIRP Annals - Manufacturing Technology 59 1 (2010): 113-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955341870&partnerID=MN8TOARS.
    10.1016/j.cirp.2010.03.061
  49. Outeiro, J.C.; Kandibanda, R.; Pina, J.C.; Dillon Jr., O.W.; Jawahir, I.S.. "Size-effects and surface integrity in machining and their influence on product sustainability". International Journal of Sustainable Manufacturing 2 1 (2010): 112-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956283777&partnerID=MN8TOARS.
    10.1504/IJSM.2010.031623
  50. Caruso, S.; Outeiro, J.C.; Umbrello, D.; M'Saoubi, R.. "Modeling and experimental validation of the surface residual stresses induced by hard machining of AISI H13 tool steel". International Journal of Material Forming 3 SUPPL. 1 (2010): 515-518. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651568290&partnerID=MN8TOARS.
    10.1007/s12289-010-0820-2
  51. M'Saoubi, R.; Outeiro, J.C.; Chandrasekaran, H.; Dillon Jr., O.W.; Jawahir, I.S.. "A review of surface integrity in machining and its impact on functional performance and life of machined products". International Journal of Sustainable Manufacturing 1 1-2 (2008): 203-236. http://www.scopus.com/inward/record.url?eid=2-s2.0-73449110054&partnerID=MN8TOARS.
    10.1504/IJSM.2008.019234
  52. Outeiro, J.C.; Pina, J.C.; M'Saoubi, R.; Pusavec, F.; Jawahir, I.S.. "Analysis of residual stresses induced by dry turning of difficult-to-machine materials". CIRP Annals - Manufacturing Technology 57 1 (2008): 77-80. http://www.scopus.com/inward/record.url?eid=2-s2.0-43649083995&partnerID=MN8TOARS.
    10.1016/j.cirp.2008.03.076
  53. Umbrello, D.; Rizzuti, S.; Outeiro, J.C.; Shivpuri, R.; M'Saoubi, R.. "Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel". Journal of Materials Processing Technology 199 1 (2008): 64-73. http://www.scopus.com/inward/record.url?eid=2-s2.0-37549026477&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2007.08.018
  54. Umbrello, D.; M'Saoubi, R.; Outeiro, J.C.. "The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steel". International Journal of Machine Tools and Manufacture 47 3-4 (2007): 462-470. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845395756&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2006.06.006
  55. Outeiro, J.C.. "Influence of tool sharpness on the thermal and mechanical phenomena generated during machining operations". International Journal of Machining and Machinability of Materials 2 3-4 (2007): 413-432. http://www.scopus.com/inward/record.url?eid=2-s2.0-48549104948&partnerID=MN8TOARS.
  56. Outeiro, J.C.; Umbrello, D.; M'Saoubi, R.. "Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel". International Journal of Machine Tools and Manufacture 46 14 (2006): 1786-1794. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746807280&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2005.11.013
  57. Outeiro, J.C.; Dias, A.M.; Jawahir, I.S.. "On the effects of residual stresses induced by coated and uncoated cutting tools with finite edge radii in turning operations". CIRP Annals - Manufacturing Technology 55 1 (2006): 111-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750054420&partnerID=MN8TOARS.
    10.1016/S0007-8506(07)60378-3
  58. Astakhov, V.P.; Outeiro, J.C.. "Modeling of the contact stress distribution at the tool-chip interface". Machining Science and Technology 9 1 (2005): 85-99. http://www.scopus.com/inward/record.url?eid=2-s2.0-17044398608&partnerID=MN8TOARS.
    10.1081/MST-200051372
  59. Outeiro, J.C.; Dias, A.M.; Lebrun, J.L.. "Experimental Assessment of Temperature Distribution in Three-Dimensional Cutting Process". Machining Science and Technology 8 3 (2004): 357-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-9744273335&partnerID=MN8TOARS.
    10.1081/LMST-200038984
  60. Outeiro, J.C.; Dias, A.M.; Lebrun, J.L.; Astakhov, V.P.. "Machining residual stresses in AISI 316L steel and their correlation with the cutting parameters". Machining Science and Technology 6 2 (2002): 251-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036391024&partnerID=MN8TOARS.
    10.1081/MST-120005959
  61. M'Saoubi, R.; Outeiro, J.C.; Changeux, B.; Lebrun, J.L.; Morão Dias, A.. "Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels". Journal of Materials Processing Technology 96 1-3 (1999): 225-233. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033225559&partnerID=MN8TOARS.
    10.1016/S0924-0136(99)00359-3
Activities

Association member

Society Organization name Role
2023 - Current Society of Manufacturing Engineers (SME)
2019 - Current Fellow, International Academy for Production Engineering (CIRP) Fellow
2013 - 2023 French Titanium Association
2017/01/01 - 2022/12/31 Member of the Scientific Board of the French-German Institute for Industry of the Future French coordinator of the Advanced Manufacturing Processes
2008 - 2018 Associate Member, International Academy for Production Engineering (CIRP) Associate Member

Committee member

Activity description
Role 		Institution / Organization
2025/04/01 - Current Member of the Strategic Planning Committee (SPC) of the Charlotte Artificial Intelligence (AI) Institute (CLT AI Institute)
Member
 UNC Charlotte, United States
2025/01/01 - Current Member of the Artificial Intelligence (AI) Research Council
Member
 UNC Charlotte, United States
2019/01/01 - 2022/12/31 (Co)Vice-President for research at the University of Burgundy-Franche-Comté (UBFC)
Member
 École Nationale Supérieure d'Arts et Métiers, France

Université de Bourgogne, France
2009 - 2012 Member of the Scientific Board of Faculty of Engineering, Catholic University of Portugal
Member
 Universidade Católica Portuguesa, Portugal
2004 - 2007 Member of the Academic Board of Beiras Regional Centre, Catholic University of Portugal
Member
 Universidade Católica Portuguesa, Portugal
2003 - 2007 Member of the Scientific Board of Beiras Regional Centre, Catholic University of Portugal
Member
 Universidade Católica Editora, Portugal
2000 - 2001 Member of the Pedagogical Board of Beiras Regional Centre, Catholic University of Portugal
Member
 Universidade Católica Portuguesa, Portugal

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2024 - Current Member of the panelist on Advanced Manufacturing of the National Sceince Foundation (NSF) National Science Foundation, United States
2017 - 2023 Member of the evaluation panel of the European Science Foundation (ESF) European Science Foundation, France
2013 - 2023 Member of the evaluation panel of the National Research Agency (ANR) Agence nationale de la recherche, France
2010 - 2012 Member of the evaluation panel of the Portuguese Foundation for Science and Technology (FCT) Fundação para a Ciência e a Tecnologia, Portugal
2010 - 2012 Member of the evaluation panel of the Council of Rectors of Portuguese Universities (CRUP) Conselho de Reitores das Universidades Portuguesas, Portugal

Journal scientific committee

Journal title (ISSN) Publisher
2022 - Current Associate Editor, Advances in Industrial and Manufacturing Engineering Elsevier
2008 - Current Machining Science & Technology Taylor & Francis Publishers
Distinctions

Award

2018 4-years Awarded premium of doctoral supervision and research (PEDR), French Ministry of Higher Education and Research, France.
2015 4-years Awarded premium of doctoral supervision and research (PEDR), French Ministry of Higher Education and Research, France.
2015 Award sabbatical leave by French Council of the Universities (CNU), France.

Title

2017 Habilitation à Diriger des Recherche/Habilitation

Other distinction

2018 Fellowship from German Academic Exchange Service (DAAD)