???global.info.a_carregar???
Ana Senos is Associate Professor at University of Aveiro and member of CICECO-Aveiro Institute of Materials. She is involved in teaching topics of processing and characterization of materials for undergraduate, master and doctoral programs. Her research activity has been developed in the investigation of ceramics and nanocomposites processing, on the topics of sintering kinetics, constrained sintering, alternative sintering techniques, microstructural/grain boundary design and its relation with the electrical answer and mechanical behavior of materials. In terms of application areas, her activity covers the development of composite materials for structural applications, dielectric and semiconductor (2D, 3D) materials for electronics applications, and porous materials for medicine and nuclear industry. Current interests are focused on nanostructured materials for structural, electrical and nuclear applications, study of grain boundary phenomena in electronic functional materials and development of new processing technologies (as Electric Field Assisted Sintering and Joining techniques, among others) with potential for industrial application, namely in the cemented carbides and ceramics industries. She has led or collaborated in 25 research projects in the field of fundamental research, as well as applied research with industrial partnership. Has national and international collaborations with European, Brazilian, Indian and USA groups and participated in 6 cooperation projects. Until 2023 Ana Senos has (is) supervising 33 MSc students, 16 PhD students and 8 Post-docs (31 MSc thesis and 12 PhD thesis finished). She has actively contributed to the dissemination of the research results of her group either through scientific publications or through participation in conferences, seminars and workshops, with more than 200 presentations, including oral presentations, some as invited, and posters. Ana Senos has been acting as referee in the selection of national and international R&D projects (2 national and 6 international project panels) and acts regularly as referee for more than 40 international journals. She has been involved in the organization of 15 international and 2 national scientific meetings, various seminars and workshops. She is active member of six professional associations: Sociedade Portuguesa de Materiais (SPM), Sociedade Portuguesa de Microscopia (SPMic), Sociedade Portuguesa de Cerâmica e Vidro (SPCV), Associação dos Engenheiros de Cerâmica e Vidro (AECV), American Ceramic Society (ACERS) and European Powder Metallurgy Association (EPMA), belonging to the European Powder Metallurgy Institute work group since 2020 (by invitation). She has been board member of SPM (2019-21, 2022-24), SPMic (2010-11) and AECV (founding and boarding member, 1986-88) . Her Publications and Scientific Track Record contains 5 book editions, 5 book chapters, 158 scientific papers (being 139 from SCI) and 2 patents. Citation record 31st March 2023: 2882 citations, h-index=31 (from Scopus base); 3775 citations, h-index=34 (from Google Scholar).
Identification

Personal identification

Full name
Ana Maria Oliveira Rocha Senos

Citation names

  • Senos, Ana
  • Senos, A.M.R.
  • Senos, A.M.O.R.

Author identifiers

Ciência ID
5617-7F2C-EC74
ORCID iD
0000-0003-4784-9784

Telephones

Fax
  • 234370204 (Professional)
Telephone
  • 234370257 (Professional)

Addresses

  • Departamento de Engenharia de Materiais e Cerâmica/ CICECO, Universidade de Aveiro , 3810-193, Aveiro, Aveiro, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Materials Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Proficiency (C2) Proficiency (C2) Upper intermediate (B2) Proficiency (C2) Advanced (C1)
Spanish; Castilian Intermediate (B1) Advanced (C1) Elementary (A2) Advanced (C1) Elementary (A2)
Education
Degree Classification
1994
Concluded
Ciência e Engenharia de Materiais (Doutoramento)
Major in Outra:Cerâmicas Técnicas
Universidade de Aveiro, Portugal
"Cinética de Sinterização Nos Estágios de Porosidade Aberta do Óxido de Zinco" (THESIS/DISSERTATION)
Aprovada com Distinção e Louvor
1976/11/02 - 1981/11/18
Concluded
Engenharia de Cerâmica e do Vidro (Licenciatura)
Universidade de Aveiro, Portugal
""Influência de Algumas Variáveis de Sinterização nas Propriedades Eléctricas dos Varistores de ZnO"" (THESIS/DISSERTATION)
Dezasseis valores
Affiliation

Teaching in Higher Education

Category
Host institution
Employer
2009/08/02 - 2023/10/06 Associate Professor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro CICECO, Portugal
1994/03/24 - 2009/08/02 Assistant Professor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro CICECO, Portugal
1986/02/22 - 1994/03/23 Assistant (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro, Portugal
1981/12/05 - 1986/02/21 Trainee Assistant (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro, Portugal
1980/10/20 - 1981/12/04 Tutor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro, Portugal

Others

Category
Host institution
Employer
2023/10/07 - Current Retired and collaborator Universidade de Aveiro, Portugal
Universidade de Aveiro, Portugal
Projects

Contract

Designation Funders
2024/02/01 - 2028/01 Accelerate the design and Insertion of nonCRM hard Materials for Next generation EXTreme applications (AIM-NEXT)
AIM-NEXT - 101119897 - GAP-101119897
Co-Principal Investigator (Co-PI)
Universidade de Aveiro, Portugal
European Commission Third Framework Programme
Ongoing
2021/01/01 - 2023/06/30 FLASH COMO TECNOLOGIA ALTERNATIVA DE SINTERIZAÇÃO DA PORCELANA
POCI-17/SI/2019-FEDER-047190
Researcher
Universidade de Aveiro CICECO, Portugal
Ongoing
2020/10/01 - 2023/06/30 3DCompCer – Fabrico aditivo de compósitos de base cerâmica para componentes mecânicos
POCI-01-0247-FEDER-047060
Supervisor
Universidade de Aveiro CICECO, Portugal
Autoridade de Gestão do Programa Operacional Competitividade e Internacionalização
Ongoing
2018/08/15 - 2021/08/14 Sinterização FLASH de oxidos funcionais livres de chumbo para o processamento sustentável de materiais para aplicações em energia e relacionadas.
PTDC/CTM-CER/29078/2017
Universidade de Aveiro, Portugal

International Iberian Nanotechnology Laboratory, Portugal

Associação para a Inovação e Desenvolvimento da FCT, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2019/01/01 - 2021/01/31 EcoRods”-Valorização de resíduos de metal duro através do processamento de cilindros
POCI-01-0247-FEDER-038146
Principal investigator
Universidade de Aveiro CICECO, Portugal
Concluded
2015/07/01 - 2018/09/30 "HARDCorr – Desenvolvimento de metal duro com elevada resistência ao desgaste e à corrosão”.
I&DT POCI-01-0247-FEDER-003382
Principal investigator
Concluded
2015/06/01 - 2016/09/30 Exploração de tensões para desenvolver nanocerâmicos funcionais por sinterização TEM in-situ.
UTAP-EXPL/CTM-NAN/0018/2014
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/06/01 - 2013/12/31 Multiferroicos e magnetoeléctricos para spintrónica: barreiras e interfaces
PTDC/CTM/099415/2008
Universidade do Porto Instituto de Física dos Materiais-Instituto de Nanociência e Nanotecnologia, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book
  1. Davim, E.J.C.; Fernandes, M.H.V.; Senos, A.M.R.. Preparation of porous glass scaffolds by salt sintering technique. 2008.
  2. Khalyavin, D.D.; Senos, A.M.R.; Mantas, P.Q.. Microstructure characterization and dielectric properties of La 4Mg3W3O18 layered oxide. 2006.
  3. Fernandes, C.M.; Senos, A.M.R.; Castanho, J.M.; Vieira, M.T.. Effect of the Ni chemical distribution on the reactivity and densification of WC-(Fe/Ni/Cr) composite powders. 2006.
  4. Pérez, J.A.; Soares, M.R.; Mantas, P.Q.; Amorín, H.; Costa, M.E.V.; Senos, A.M.R.. Growth of lead zirconate titanate single crystals by the high temperature solution method. 2006.
  5. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.. Study of sintering variables of tungsten carbide particles sputter-deposited with stainless steel. 2004.
  6. Rolo, A.; Tavares, A.; Senos, A.M.R.; Almeida, M.. Effect of the enzyme concentration on the DIRECT coagulation casting of hydroxyapatite-alumina bodies. 2004.
  7. Khalyavin, D.D.; Han, J.P.; Senos, A.M.R.; Mantas, P.Q.. Structural and dielectric characteristics of Ba2MeWO6 (Me=Mg, NI, Zn) double perovskltes. 2004.
  8. Huang, Y.X.; Senos, A.M.R.; Baptista, J.L.. Dilatometric based analysis of the synthesis of Al2TiO5. 2001.
  9. Huang, Y.X.; Senos, A.M.R.; Baptista, J.L.. Aluminium titanate-25vol% mullite composite powder obtained by different processing methods. 1997.
Book chapter
  1. Ana Maria de Oliveira e Rocha Senos; Cristina Maria da Silva Fernandes. "Sintering of Hardmetals With Alternative Binders". 396-408. Elsevier, 2022.
    10.1016/b978-0-12-819726-4.00091-0
Conference paper
  1. Amaral, L.; Senos, A.M.R.; Jamin, C.; Guillon, O.; Vilarinho, P.M.. "Stress assisted grain growth and dielectric properties of BaLa 4Ti4O15 thick films". 2012.
  2. Fernandes, C.M.; Oliveira, F.J.; Senos, A.M.R.. "Reactive sintering of tungsten carbide-stainless steel hardmetals assessed by dilatometry". 2011.
  3. Salak, A.N.; Khalyavin, D.D.; Senos, A.M.R.; Mantas, P.Q.; Ferreira, V.M.. "Structure and dielectric behavior of the (1-x)La(Mg1/2Ti 1/2)O3xBa(Mg1/2W1/2)O3 microwave ceramics". 2006.
    10.1080/00150190600701277
  4. Ferreira, V.; Kholkin, A.; Mantas, P.; Vilarinho, P.; Senos, A.. "Ferroelectrics: Guest Editorial". 2003.
  5. Ferreira, V.; Kholkin, A.; Mantas, P.; Vilarinho, P.; Senos, A.. "Ferroelectrics: Guest editorial". 2003.
  6. Gaspar, C.; Pereira, L.; Costa, F.M.; Monteiro, T.; Han, J.; Senos, A.M.R.; Mantas, P.. "Optical and electrical characterisation of iron-doped ZnO". 2000.
    10.1109/SIM.2000.939254
Journal article
  1. Ojalvo, Cristina; Mineiro, Ricardo; Fernandes, Cristina M.; Senos, Ana M.R.; Ortiz, Angel L.. "Transient liquid-phase assisted low-temperature spark plasma sintering of TiCN with Si aids". Journal of the European Ceramic Society 44 3 (2024): 1511-1519. http://dx.doi.org/10.1016/j.jeurceramsoc.2023.10.010.
    10.1016/j.jeurceramsoc.2023.10.010
  2. Rocha, A.M. Ferro; Santos, A.M.; Mineiro, R.; Pereira, P.; Sacramento, J.; Senos, A.M.R.; Bastos, A.C.. "Prediction of hardmetal corrosion based on the binder response". International Journal of Refractory Metals and Hard Materials 118 (2024): 106480. http://dx.doi.org/10.1016/j.ijrmhm.2023.106480.
    10.1016/j.ijrmhm.2023.106480
  3. Pereira, P.; Sacramento, J.; Oliveira, F.J.; Malheiros, L.F.; Senos, A.M.R.. "Thermodynamic assessment of hardmetals with alternative binders and experimental validation". International Journal of Refractory Metals and Hard Materials 118 (2024): 106441. http://dx.doi.org/10.1016/j.ijrmhm.2023.106441.
    10.1016/j.ijrmhm.2023.106441
  4. Mineiro, Ricardo; Fernandes, C.M.; Silva, E.L.; Soares, M.R.; Figueiredo, D.; Ferrari, B.; Sanchez-Herencia, A.J.; Senos, A.M.R.. "Reaction behavior during Spark Plasma Sintering of cBN-TiCN-Ni powders". Journal of the European Ceramic Society 43 15 (2023): 6783-6792. http://dx.doi.org/10.1016/j.jeurceramsoc.2023.06.074.
    10.1016/j.jeurceramsoc.2023.06.074
  5. Oliveira, Gonçalo; Senos, Ana; Fernandes, Cristina; Figueiredo, Daniel; Vieira, Teresa. "Material Extrusion to Manufacture Carbide-Based Advanced Cutting Tools". Materials 16 21 (2023): 6902. http://dx.doi.org/10.3390/ma16216902.
    10.3390/ma16216902
  6. Ribeiro, Camila; Figueiredo, Luis; Serrazina, Ricardo; Almeida, José C.; Salgado, Joana; Santos, Regina; Jorge, Hélio; et al. "FLASH sintering of porcelain stoneware: Effect of composition modifications". Journal of the European Ceramic Society 43 9 (2023): 4189-4197. http://dx.doi.org/10.1016/j.jeurceramsoc.2023.03.008.
    10.1016/j.jeurceramsoc.2023.03.008
  7. P. Pereira; A.M. Ferro Rocha; A.C. Bastos; F.J. Oliveira; L.M. Vilhena; A. Ramalho; J. Sacramento; L.F. Malheiros; A.M.R. Senos. "Development of WC-NiCrMo hardmetals". International Journal of Refractory Metals and Hard Materials 112 (2023): 106147-106147. http://dx.doi.org/10.1016/j.ijrmhm.2023.106147.
    10.1016/j.ijrmhm.2023.106147
  8. P. Pereira; A.M. Ferro Rocha; J. Sacramento; F.J. Oliveira; L.F. Malheiros; A.M.R. Senos; A.C. Bastos. "Effect of different acidic media on the corrosion behaviour of hardmetals with Ni-based binders". International Journal of Refractory Metals and Hard Materials 110 (2023): 106019-106019. http://dx.doi.org/10.1016/j.ijrmhm.2022.106019.
    10.1016/j.ijrmhm.2022.106019
  9. Mariana Vassal; Cátia D. Pereira; Filipa Martins; Vera L. M. Silva; Artur M. S. Silva; Ana M. R. Senos; Maria Elizabete Costa; Maria de Lourdes Pereira; Sandra Rebelo. "Different Strategies to Attenuate the Toxic Effects of Zinc Oxide Nanoparticles on Spermatogonia Cells". Nanomaterials 12 20 (2022): 3561-3561. http://dx.doi.org/10.3390/nano12203561.
    10.3390/nano12203561
  10. P. Pereira; L.M. Vilhena; J. Sacramento; A.M.R. Senos; L.F. Malheiros; A. Ramalho. "Tribological behaviour of different formulations of WC composites". Wear 506-507 (2022): 204415-204415. http://dx.doi.org/10.1016/j.wear.2022.204415.
    10.1016/j.wear.2022.204415
  11. Ricardo Serrazina; Alexander Tkach; Luis Pereira; Ana M. O. R. Senos; Paula M. Vilarinho. "Flash Sintered Potassium Sodium Niobate: High-Performance Piezoelectric Ceramics at Low Thermal Budget Processing". Materials 15 19 (2022): 6603-6603. http://dx.doi.org/10.3390/ma15196603.
    10.3390/ma15196603
  12. Pedro Pereira; L.M.Vilhena; Joaquim Sacramento; Ana Senos; Luís Malheiros; A. Ramalho. "Influence of Different Binders and Severe Environmental Conditions on the Tribological and Electrochemical Behaviour of WC-Based Composites". Lubricants 10 7 (2022): 145-145. http://dx.doi.org/10.3390/lubricants10070145.
    10.3390/lubricants10070145
  13. Pereira, P.; Rocha, A.M. Ferro; Sacramento, J.; Oliveira, F.J.; Senos, A.M.R.; Malheiros, L.F.; Bastos, A.C.. "Corrosion resistance of WC hardmetals with different Co and Ni-based binders". International Journal of Refractory Metals and Hard Materials 104 (2022): 105799. http://dx.doi.org/10.1016/j.ijrmhm.2022.105799.
    10.1016/j.ijrmhm.2022.105799
  14. Vilhena, Luís; Domingues, Bruno; Fernandes, Cristina; Senos, Ana; Ramalho, Amílcar. "Mechanical and Tribological Characterization of WC-Co and WC-AISI 304 Composites by a Newly Developed Equipment". Materials 15 3 (2022): 1187. http://dx.doi.org/10.3390/ma15031187.
    10.3390/ma15031187
  15. Vilhena, Luis M.; Fernandes, Cristina M.; Sacramento, Joaquim; Senos, Ana M. R.; Ramalho, Amilcar. "Sliding wear and friction behaviour of WC -stainless steel and WC–Co composites". Lubrication Science (2022): http://dx.doi.org/10.1002/ls.1586.
    10.1002/ls.1586
  16. Ricardo Serrazina; Mariana Gomes; Rui Vilarinho; Luis Pereira; Julian S. Dean; Ian M. Reaney; Ana M. O. R. Senos; Paula Vilarinho; J. Agostinho Moreira. "Induced internal stresses and their relation to FLASH sintering of KNN ceramics". Journal of Materials Chemistry C 10 30 (2022): 10916-10925. http://dx.doi.org/10.1039/d2tc01680j.
    10.1039/d2tc01680j
  17. Pereira, P.; Vilhena, L.M.; Sacramento, J.; Senos, A.M.R.; Malheiros, L.F.; Ramalho, A.. "Abrasive wear resistance of WC-based composites, produced with Co or Ni-rich binders". Wear 482-483 (2021): 203924. http://dx.doi.org/10.1016/j.wear.2021.203924.
    10.1016/j.wear.2021.203924
  18. Serrazina, Ricardo; Ribeiro, Camila; Costa, Maria Elisabete; Pereira, Luis; Vilarinho, Paula M.; Senos, Ana M. O. R.. "Particle Characteristics’ Influence on FLASH Sintering of Potassium Sodium Niobate: A Relationship with Conduction Mechanisms". Materials 14 5 (2021): 1321. http://dx.doi.org/10.3390/ma14051321.
    10.3390/ma14051321
  19. Santos, R.F.; Rocha, A.M. Ferro; Bastos, A.C.; Cardoso, J.P.; Rodrigues, F.; Fernandes, C.M.; Sacramento, J.; et al. "The effect of Cr content on the corrosion resistance of WC-Ni-Cr-Mo composites". International Journal of Refractory Metals and Hard Materials 95 (2021): 105434. http://dx.doi.org/10.1016/j.ijrmhm.2020.105434.
    10.1016/j.ijrmhm.2020.105434
  20. Ricardo Serrazina; Ana M. O. R. Senos; Luis Pereira; Julian S. Dean; Ian M. Reaney; Paula M. Vilarinho. "Front Cover: The Role of Particle Contact in Densification of FLASH Sintered Potassium Sodium Niobate (Eur. J. Inorg. Chem. 39/2020)". European Journal of Inorganic Chemistry (2020): https://doi.org/10.1002/ejic.202000870.
    10.1002/ejic.202000870
  21. Ricardo Serrazina; Ana M. O. R. Senos; Luis Pereira; Julian S. Dean; Ian M. Reaney; Paula M. Vilarinho. "The Role of Particle Contact in Densification of FLASH Sintered Potassium Sodium Niobate". European Journal of Inorganic Chemistry (2020): https://doi.org/10.1002/ejic.202000458.
    10.1002/ejic.202000458
  22. Ricardo Serrazina; Paula M. Vilarinho; Ana M.O.R. Senos; Luis Pereira; Ian M. Reaney; Julian S. Dean. "Modelling the particle contact influence on the Joule heating and temperature distribution during FLASH sintering". Journal of the European Ceramic Society 40 4 (2020): 1205-1211. https://doi.org/10.1016/j.jeurceramsoc.2019.12.015.
    10.1016/j.jeurceramsoc.2019.12.015
  23. C.M. Fernandes; J. Puga; A.M.R. Senos. "Nanometric WC-12¿wt% AISI 304 powders obtained by high energy ball milling". Advanced Powder Technology 30 5 (2019): 1018-1024. https://doi.org/10.1016/j.apt.2019.02.016.
    10.1016/j.apt.2019.02.016
  24. A.M. Ferro Rocha; A.C. Bastos; J.P. Cardoso; F. Rodrigues; C.M. Fernandes; E. Soares; J. Sacramento; A.M.R. Senos; M.G.S. Ferreira. "Corrosion behaviour of WC hardmetals with nickel-based binders". Corrosion Science 147 (2019): 384-393. https://doi.org/10.1016/j.corsci.2018.11.015.
    10.1016/j.corsci.2018.11.015
  25. Ricardo Serrazina; Julian S. Dean; Ian M. Reaney; Luis Pereira; Paula M. Vilarinho; Ana M. O. R. Senos. "Mechanism of densification in low-temperature FLASH sintered lead free potassium sodium niobate (KNN) piezoelectrics". Journal of Materials Chemistry C (2019): https://doi.org/10.1039/C9TC03117K.
    10.1039/C9TC03117K
  26. C.M. Fernandes; A. Rocha; J.P. Cardoso; A.C. Bastos; E. Soares; J. Sacramento; M.G.S. Ferreira; A.M.R. Senos. "WC-stainless steel hardmetals". International Journal of Refractory Metals and Hard Materials 72 (2018): 21-26. https://doi.org/10.1016/j.ijrmhm.2017.11.046.
    10.1016/j.ijrmhm.2017.11.046
  27. Fernandes, C.M.; Oliveira, F.J.; Senos, A.M.R.. "Reactive sintering and microstructure development of tungsten carbide-AISI 304 stainless steel cemented carbides". Materials Chemistry and Physics 193 (2017): 348-355. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016156647&partnerID=MN8TOARS.
    10.1016/j.matchemphys.2017.02.030
  28. Ramos, J.P.; Senos, A.M.R.; Stora, T.; Fernandes, C.M.; Bowen, P.. "Development of a processing route for carbon allotrope-based TiC porous nanocomposites". Journal of the European Ceramic Society (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85018284801&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2017.04.016
  29. Fernandes, M.A.C.; Bóia, J.P.; Selvaraj, N.B.; Abrantes, J.C.C.; Senos, A.M.R.; Vilarinho, P.M.. "Statistical analysis of grain size distributions in pressure-assisted BaLa4Ti4O15 microstructures". Microscopy and Microanalysis 22 (2016): 36-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992568289&partnerID=MN8TOARS.
    10.1017/S1431927616000374
  30. Fernandes, C.M.; Almeida, B.A.; Soares, E.; Sacramento, J.; Senos, A.M.R.. "EBSD microstructural analysis of WC-AISI 304 cemented carbides with carbon addition". Microscopy and Microanalysis 22 (2016): 34-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014569960&partnerID=MN8TOARS.
    10.1017/S1431927616000362
  31. Ramos, J.P.; Gottberg, A.; Augusto, R.S.; Mendonca, T.M.; Riisager, K.; Seiffert, C.; Bowen, P.; Senos, A.M.R.; Stora, T.. "Target nanomaterials at CERN-ISOLDE: Synthesis and release data". Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 376 (2016): 81-85. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007400463&partnerID=MN8TOARS.
    10.1016/j.nimb.2016.03.003
  32. Vilhena, L.M.; Fernandes, C.M.; Soares, E.; Sacramento, J.; Senos, A.M.R.; Ramalho, A.. "Abrasive wear resistance of WC-Co and WC-AISI 304 composites by ball-cratering method". Wear 346-347 (2016): 99-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947975771&partnerID=MN8TOARS.
    10.1016/j.wear.2015.11.005
  33. Silva, V.L.; Fernandes, C.M.; Senos, A.M.R.. "Copper wettability on tungsten carbide surfaces". Ceramics International 42 1 (2016): 1191-1196. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946607161&partnerID=MN8TOARS.
    10.1016/j.ceramint.2015.09.050
  34. Amaral, Luis; Vilarinho, Paula M.; Senos, Ana M. R.. "Electrophoretic deposition and constrained sintering of strontium titanate thick films". (2015): http://hdl.handle.net/10773/20771.
    10.1016/j.matchemphys.2014.10.043
  35. Senos, Ana. "Microstructure evaluation of titanate based layered perovskites: constrained vs. free sintering". Microscopy and Microanalysis (2015): http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=9946997&fileId=S1431927614014160.
    doi:10.1017/S1431927614014160
  36. Oliveira, A.B.; Bastos, A.C.; Fernandes, C.M.; Pinho, C.M.S.; Senos, A.M.R.; Soares, E.; Sacramento, J.; Zheludkevich, M.L.; Ferreira, M.G.S.. "Corrosion behaviour of WC-10% AISI 304 cemented carbides". Corrosion Science 100 (2015): 322-331. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943454064&partnerID=MN8TOARS.
    10.1016/j.corsci.2015.08.006
  37. Ramos, J.P.; Fernandes, C.M.; Stora, T.; Senos, A.M.R.. "Sintering kinetics of nanometric calcium oxide in vacuum atmosphere". Ceramics International 41 6 (2015): 8093-8099. http://www.scopus.com/inward/record.url?eid=2-s2.0-84927581228&partnerID=MN8TOARS.
    10.1016/j.ceramint.2015.03.007
  38. Selvaraj, N.B.; Fernandes, M.; Denneulin, T.; Snoeck, E.; Vilarinho, P.M.; Senos, A.M.R.. "HRTEM Studies of Stress Assisted Sintered BaLa4Ti4O15". Microscopy and Microanalysis 21 (2015): 47-48. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944050407&partnerID=MN8TOARS.
    10.1017/S143192761501404X
  39. Fernandes, C.M.; Vieira, M.T.; Senos, A.M.R.. "EBSD Characterization of WC-AISI304 Cemented Carbides". Microscopy and Microanalysis 21 (2015): 25-26. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944067508&partnerID=MN8TOARS.
    10.1017/S1431927615013938
  40. Senos, Ana. "Microstructural inspection of the M6C phase in heat-treated WC-AISI 304 stainless". Microscopy and Microanalysis (2015): http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=9947035&fileId=S1431927614014251.
    doi:10.1017/S1431927614014251
  41. Senos, A.M.R.; Amaral, L.; Selvaraj, N.B.; Fernandes, M.; Jamin, C.; Guillon, O.; Reaney, I.; Vilarinho, P.M.. "Microstructure evaluation of titanate based layered perovskites: Constrained vs. free sintering". Microscopy and Microanalysis 21 (2015): 92-93. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992626413&partnerID=MN8TOARS.
    10.1017/S1431927614014160
  42. Pérez, J.A.; Soares, M.R.; Paz, F.A.A.; Klinowski, J.; Senos, A.M.R.; Mantas, P.Q.. "Structural and electrical characteristics of rhombohedral lead zirconate titanate single crystals". Journal of Materials Science 50 12 (2015): 4232-4243. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937759962&partnerID=MN8TOARS.
    10.1007/s10853-015-8974-4
  43. Senos, Ana. "Microstructural characterization of WC-AISI304 composites obtained by selective laser sintering". Microscopy and Microanalysis (2015): http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=9947026&fileId=S1431927614014226.
    doi:10.1017/S1431927614014226
  44. Davim, E.J.C.; Fernandes, M.H.V.; Senos, A.M.R.. "Increased surface area during sintering of calcium phosphate glass and sodium chloride mixtures". Journal of the European Ceramic Society 35 1 (2015): 329-336. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908067420&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2014.08.009
  45. Fernandes, C.M.; Vilhena, L.M.; Pinho, C.M.S.; Oliveira, F.J.; Soares, E.; Sacramento, J.; Senos, A.M.R.. "Mechanical characterization of WC-10wt% AISI 304 cemented carbides". Materials Science and Engineering A 618 (2014): 629-636. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908352095&partnerID=MN8TOARS.
    10.1016/j.msea.2014.09.064
  46. Ramos, J.P.; Gottberg, A.; Mendonça, T.M.; Seiffert, C.; Senos, A.M.R.; Fynbo, H.O.U.; Tengblad, O.; et al. "Intense 31-35Ar beams produced with a nanostructured CaO target at ISOLDE". Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 320 (2014): 83-88. http://www.scopus.com/inward/record.url?eid=2-s2.0-84891709883&partnerID=MN8TOARS.
    10.1016/j.nimb.2013.12.009
  47. Mota, D.A.; Romaguera Barcelay, Y.; Senos, A.M.R.; Fernandes, C.M.; Tavares, P.B.; Gomes, I.T.; Sá, P.; et al. "Unravelling the effect of SrTiO3antiferrodistortive phase transition on the magnetic properties of La0.7Sr0.3MnO3thin films". Journal of Physics D: Applied Physics 47 43 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84907898459&partnerID=MN8TOARS.
    10.1088/0022-3727/47/43/435002
  48. Davim, E.J.C.; Senos, A.M.R.; Fernandes, M.H.V.. "Non-isothermal crystallization kinetics of a Si-Ca-P-Mg bioactive glass". Journal of Thermal Analysis and Calorimetry 117 2 (2014): 643-651. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904513015&partnerID=MN8TOARS.
    10.1007/s10973-014-3786-3
  49. Amaral, Luis; Jamin, Christine; Senos, Ana M. R.; Vilarinho, Paula M.; Guillon, Olivier. "Constrained sintering of BaLa4Ti4O15 thick films: Pore and grain anisotropy". (2013): http://hdl.handle.net/10773/20216.
    10.1016/j.jeurceramsoc.2013.01.031
  50. Amaral, Luis; Fernandes, Manuela; Reaney, Ian M.; Harmer, Martin P.; Senos, Ana M. R.; Vilarinho, Paula M.. "Grain Growth Anomaly and Dielectric Response in Ti-rich Strontium Titanate Ceramics". (2013): http://hdl.handle.net/10773/20677.
    10.1021/jp4035437
  51. Marques, B.J.; Fernandes, C.M.; Senos, A.M.R.. "Sintering, microstructure and properties of WC-AISI304 powder composites". Journal of Alloys and Compounds 562 (2013): 164-170. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874943494&partnerID=MN8TOARS.
    10.1016/j.jallcom.2013.02.013
  52. Amaral, L.; Fernandes, M.; Senos, A.M.R.; Vilarinho, P.M.; Harmer, M.P.. "Grain growth anomaly in ti-rich strontium titanate as revealed by electron microscopy". Microscopy and Microanalysis 18 SUPPL.5 (2012): 123-124. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894647687&partnerID=MN8TOARS.
    10.1017/S143192761201327X
  53. Fernandes, C.M.; Willinger, M.-G.; Vieira, M.T.; Senos, A.M.R.. "Interface exploring of tungsten carbide-stainless steel composites through HRTEM". Microscopy and Microanalysis 18 SUPPL.5 (2012): 109-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876125026&partnerID=MN8TOARS.
    10.1017/S1431927612013207
  54. De Sousa, P.; Panwar, N.; Bdikin, I.; Kholkin, A.L.; Fernandes, C.M.; Senos, A.M.R.. "Effect of the grain size on the magnetic phase separation in La 0.8Sr0.2MnO3 by magnetic force microscopy". Microscopy and Microanalysis 18 SUPPL.5 (2012): 101-102. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894645503&partnerID=MN8TOARS.
    10.1017/S1431927612013165
  55. Amaral, L.; Jamin, C.; Senos, A.M.R.; Vilarinho, P.M.; Guillon, O.. "Effect of the substrate on the constrained sintering of BaLa 4 Ti 4 O 15 thick films". Journal of the American Ceramic Society 95 12 (2012): 3781-3787. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870910263&partnerID=MN8TOARS.
    10.1111/j.1551-2916.2012.05466.x
  56. Tomczyk, M.; Senos, A.M.O.R.; Reaney, I.M.; Vilarinho, P.M.. "Reduction of microcracking in YMnO 3 ceramics by Ti substitution". Scripta Materialia 67 5 (2012): 427-430. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864283658&partnerID=MN8TOARS.
    10.1016/j.scriptamat.2012.04.042
  57. Tomczyk, M.; Senos, A.M.; Vilarinho, P.M.; Reaney, I.M.. "Origin of microcracking in YMnO 3 ceramics". Scripta Materialia 66 5 (2012): 288-291. http://www.scopus.com/inward/record.url?eid=2-s2.0-84655162064&partnerID=MN8TOARS.
    10.1016/j.scriptamat.2011.11.014
  58. Souza, A.E.; Santos, G.T.A.; Barra, B.C.; MacEdo, W.D.; Teixeira, S.R.; Santos, C.M.; Senos, A.M.O.R.; Amaral, L.; Longo, E.. "Photoluminescence of SrTiO 3: Influence of particle size and morphology". Crystal Growth and Design 12 11 (2012): 5671-5679. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868682277&partnerID=MN8TOARS.
    10.1021/cg301168k
  59. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.. "Versatility of the sputtering technique in the processing of WC-Fe-Ni-Cr composites". Surface and Coatings Technology 206 23 (2012): 4915-4921. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863782740&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2012.05.093
  60. Bdikin, I.K.; Pérez, J.A.; Coondoo, I.; Senos, A.M.R.; Mantas, P.Q.; Kholkin, A.L.. "Ferroelectric domain structure of PbZr0.35Ti 0.65O3 single crystals by piezoresponse force microscopy". Journal of Applied Physics 110 5 (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052949424&partnerID=MN8TOARS.
    10.1063/1.3623768
  61. Fernandes, C.M.; Senos, A.M.R.. "Cemented carbide phase diagrams: A review". International Journal of Refractory Metals and Hard Materials 29 4 (2011): 405-418. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955530115&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2011.02.004
  62. Ramalhete, P.S.; Senos, A.M.R.; Aguiar, C.. "Digital tools for material selection in product design". Materials and Design 31 5 (2010): 2275-2287. http://www.scopus.com/inward/record.url?eid=2-s2.0-76549122531&partnerID=MN8TOARS.
    10.1016/j.matdes.2009.12.013
  63. Fernandes, C.M.; Guisbiers, G.; Pereira, S.; Barradas, N.P.; Alves, E.; Senos, A.M.R.; Vieira, M.T.. "Annealing Ni nanocrystalline on WC-Co". Journal of Alloys and Compounds 482 1-2 (2009): 131-136. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349086276&partnerID=MN8TOARS.
    10.1016/j.jallcom.2009.04.106
  64. Veríssimo, M.I.S.; Mantas, P.Q.; Senos, A.M.R.; Oliveira, J.A.B.P.; Gomes, M.T.S.R.. "Preparation of PZT discs for use in an acoustic wave sensor". Ceramics International 35 2 (2009): 617-622. http://www.scopus.com/inward/record.url?eid=2-s2.0-57749105607&partnerID=MN8TOARS.
    10.1016/j.ceramint.2008.01.016
  65. Amaral, L.; Senos, A.M.R.; Vilarinho, P.M.. "Sintering kinetic studies in nonstoichiometric strontium titanate ceramics". Materials Research Bulletin 44 2 (2009): 263-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-57749200673&partnerID=MN8TOARS.
    10.1016/j.materresbull.2008.06.002
  66. Fernandes, C.M.; Popovich, V.; Matos, M.; Senos, A.M.R.; Vieira, M.T.. "Carbide phases formed in WC-M (M = Fe/Ni/Cr) systems". Ceramics International 35 1 (2009): 369-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-55949115372&partnerID=MN8TOARS.
    10.1016/j.ceramint.2007.11.001
  67. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.; Fernandes, J.V.. "Composites from WC powders sputter-deposited with iron rich binders". Ceramics International 35 4 (2009): 1617-1623. http://www.scopus.com/inward/record.url?eid=2-s2.0-61449146054&partnerID=MN8TOARS.
    10.1016/j.ceramint.2008.09.009
  68. Castanho, J.M.; Vieira, M.T.; Fernandes, C.M.; Senos, A.M.R.; Matos, M.. "Coated WC powders by sputtered nanostructured Ni and stainless steel". Vacuum 82 12 (2008): 1404-1406. http://www.scopus.com/inward/record.url?eid=2-s2.0-49349115808&partnerID=MN8TOARS.
    10.1016/j.vacuum.2008.03.040
  69. Amaral, L.; Senos, A.M.R.; Vilarinho, P.M.. "Nonstoichiometry effects in SrTiO3 ceramics assessed by transmission electron microscopy". Microscopy and Microanalysis 14 SUPPL. 3 (2008): 5-6. http://www.scopus.com/inward/record.url?eid=2-s2.0-53349175792&partnerID=MN8TOARS.
    10.1017/S1431927608089216
  70. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.; Antunes, J.M.. "Mechanical characterization of composites prepared from WC powders coated with Ni rich binders". International Journal of Refractory Metals and Hard Materials 26 5 (2008): 491-498. http://www.scopus.com/inward/record.url?eid=2-s2.0-44549086544&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2007.12.001
  71. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.. "Microscopic characterization of the thermal evolution of stainless steel coatings sputter-deposited onto WC particles". Microscopy and Microanalysis 14 SUPPL. 3 (2008): 39-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-53349107705&partnerID=MN8TOARS.
    10.1017/S1431927608089320
  72. Khalyavin, D.D.; Senos, A.M.R.; Mantas, P.Q.; Argyriou, D.N.; Tarroso Gomes, I.; Vieira, L.G.; Ribeiro, J.L.. "Structure and dielectric characterization of a new A-site deficient La5/3MgTaO6 perovskite". Journal of Solid State Chemistry 180 1 (2007): 41-48. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846211492&partnerID=MN8TOARS.
    10.1016/j.jssc.2006.09.016
  73. Khalyavin, D.D.; Senos, A.M.R.; Mantas, P.Q.. "6H hexagonal structure of low loss Ba3MTiWO9 (M = Mg, Zn) dielectrics". Materials Research Bulletin 42 1 (2007): 126-130. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845453319&partnerID=MN8TOARS.
    10.1016/j.materresbull.2006.05.005
  74. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.. "Control of eta carbide formation in tungsten carbide powders sputter-coated with (Fe/Ni/Cr)". International Journal of Refractory Metals and Hard Materials 25 4 (2007): 310-317. http://www.scopus.com/inward/record.url?eid=2-s2.0-34147143584&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2006.07.004
  75. Khalyavin, D.D.; Lopes, A.B.; Senos, A.M.R.; Mantas, P.Q.. "Crystal structure of la6Mg4Ta2W 2O24 Oxide: A representative of a novel A 3nB'2nB¿2nO12n homologous series with n = 2". Chemistry of Materials 18 16 (2006): 3843-3849. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748265314&partnerID=MN8TOARS.
    10.1021/cm060916q
  76. Khalyavin, D.D.; Salak, A.N.; Seabra, M.P.; Senos, A.M.R.; Mantas, P.Q.; Ferreira, V.M.. "Structure evolution in the La2MgTiO6-Ba 2MgWO6 system". Materials Research Bulletin 41 1 (2006): 167-176. http://www.scopus.com/inward/record.url?eid=2-s2.0-28944444815&partnerID=MN8TOARS.
    10.1016/j.materresbull.2005.07.020
  77. Khalyavin, D.D.; Salak, A.N.; Senos, A.M.R.; Mantas, P.Q.; Ferreira, V.M.. "Structure sequence in the CaTiO3-LaAlO3 microwave ceramics - Revised". Journal of the American Ceramic Society 89 5 (2006): 1721-1723. http://www.scopus.com/inward/record.url?eid=2-s2.0-33646701412&partnerID=MN8TOARS.
    10.1111/j.1551-2916.2006.00929.x
  78. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.. "Particle surface properties of stainless steel-coated tungsten carbide powders". Powder Technology 164 3 (2006): 124-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745028618&partnerID=MN8TOARS.
    10.1016/j.powtec.2006.03.005
  79. Tkach, A.; Vilarinho, P.M.; Senos, A.M.R.; Kholkin, A.L.. "Effect of nonstoichiometry on the microstructure and dielectric properties of strontium titanate ceramics". Journal of the European Ceramic Society 25 12 SPEC. I (2005): 2769-2772. http://www.scopus.com/inward/record.url?eid=2-s2.0-20444438760&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2005.03.137
  80. Pérez, J.A.; Soares, M.R.; Mantas, P.Q.; Senos, A.M.R.. "Microstructural design of PZT ceramics". Journal of the European Ceramic Society 25 12 SPEC. I (2005): 2207-2210. http://www.scopus.com/inward/record.url?eid=2-s2.0-20444435918&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2005.03.031
  81. Khalyavin, D.D.; Senos, A.M.R.; Mantas, P.Q.. "Crystal structure of la4Mg3W3O 18 layered oxide". Journal of Physics Condensed Matter 17 17 (2005): 2585-2595. http://www.scopus.com/inward/record.url?eid=2-s2.0-24144466490&partnerID=MN8TOARS.
    10.1088/0953-8984/17/17/006
  82. Han, J.; Mantas, P.Q.; Senos, A.M.R.. "Sintering kinetics of undoped and Mn-doped zinc oxide in the intermediate stage". Journal of the American Ceramic Society 88 7 (2005): 1773-1778. http://www.scopus.com/inward/record.url?eid=2-s2.0-27644534826&partnerID=MN8TOARS.
    10.1111/j.1551-2916.2005.00360.x
  83. Salak, A.N.; Khalyavin, D.D.; Mantas, P.Q.; Senos, A.M.R.; Ferreira, V.M.. "Structure-dependent microwave dielectric properties of (1-x)La(Mg 1/2Ti 1/2)O 3-xLa 2/3TiO 3 ceramics". Journal of Applied Physics 98 3 (2005): http://www.scopus.com/inward/record.url?eid=2-s2.0-23944440931&partnerID=MN8TOARS.
    10.1063/1.1989428
  84. Khalyavin, D.D.; Senos, A.M.R.; Mantas, P.Q.. "Crystal structure of Sr2MgWO6 and Ba 2SrWO6 determined by powder X-ray diffraction". Powder Diffraction 19 3 (2004): 280-283. http://www.scopus.com/inward/record.url?eid=2-s2.0-4944219687&partnerID=MN8TOARS.
    10.1154/1.1757449
  85. Khalyavin, D.D.; Han, J.; Senos, A.M.R.; Mantas, P.Q.. "Synthesis and dielectric properties of tungsten-based complex perovskites". Journal of Materials Research 18 11 (2003): 2600-2607. http://www.scopus.com/inward/record.url?eid=2-s2.0-0242552199&partnerID=MN8TOARS.
  86. Han, J.; Shen, M.; Cao, W.; Senos, A.M.R.; Mantas, P.Q.. "Hopping conduction in Mn-doped ZnO". Applied Physics Letters 82 1 (2003): 67-69. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037421408&partnerID=MN8TOARS.
    10.1063/1.1535262
  87. Fernandes, C.M.; Senos, A.M.R.; Vieira, M.T.. "Sintering of tungsten carbide particles sputter-deposited with stainless steel". International Journal of Refractory Metals and Hard Materials 21 3-4 (2003): 147-154. http://www.scopus.com/inward/record.url?eid=2-s2.0-0043029700&partnerID=MN8TOARS.
    10.1016/S0263-4368(03)00029-5
  88. Han, J.; Senos, A.M.R.; Mantas, P.Q.; Cao, W.. "Dielectric relaxation of shallow donor in polycrystalline Mn-doped ZnO". Journal of Applied Physics 93 7 (2003): 4097-4103. http://www.scopus.com/inward/record.url?eid=2-s2.0-0344089058&partnerID=MN8TOARS.
    10.1063/1.1557781
  89. Fernandes, C.M.; Ferreira, V.M.; Senos, A.M.R.; Vieira, M.T.. "Stainless steel coatings sputter-deposited on tungsten carbide powder particles". Surface and Coatings Technology 176 1 (2003): 103-108. http://www.scopus.com/inward/record.url?eid=2-s2.0-0242498781&partnerID=MN8TOARS.
    10.1016/S0257-8972(03)00021-5
  90. Veríssimo, M.I.S.; Mantas, P.Q.; Senos, A.M.R.; Oliveria, J.A.B.P.; Gomes, M.T.S.R.. "Suitability of PZT ceramics for mass sensors versus widespread used quartz crystals". Sensors and Actuators, B: Chemical 95 1-3 (2003): 25-31. http://www.scopus.com/inward/record.url?eid=2-s2.0-18544398017&partnerID=MN8TOARS.
    10.1016/S0925-4005(03)00397-6
  91. Huang, Y.X.; Senos, A.M.R.. "Effect of the powder precursor characteristics in the reaction sintering of aluminum titanate". Materials Research Bulletin 37 1 (2002): 99-111. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036174525&partnerID=MN8TOARS.
    10.1016/S0025-5408(01)00802-9
  92. Bao, Y.; Senos, A.M.R.; Almeida, M.; Gauckler, L.J.. "Rheological behavior of aqueous suspensions of hydroxyapatite (HAP)". Journal of Materials Science: Materials in Medicine 13 7 (2002): 639-643. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036301478&partnerID=MN8TOARS.
    10.1023/A:1015773322821
  93. Han, J.; Senos, A.M.R.; Mantas, P.Q.. "Deep donors in polycrystalline Mn-doped ZnO". Materials Chemistry and Physics 75 1-3 (2002): 117-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037188143&partnerID=MN8TOARS.
    10.1016/S0254-0584(02)00063-9
  94. Han, J.; Mantas, P.Q.; Senos, A.M.R.. "Defect chemistry and electrical characteristics of undoped and Mn-doped ZnO". Journal of the European Ceramic Society 22 1 (2002): 49-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036133112&partnerID=MN8TOARS.
    10.1016/S0955-2219(01)00241-2
  95. Han, J.; Senos, A.M.R.; Mantas, P.Q.. "Varistor behaviour of Mn-doped ZnO ceramics". Journal of the European Ceramic Society 22 9-10 (2002): 1653-1660. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036722295&partnerID=MN8TOARS.
    10.1016/S0955-2219(01)00484-8
  96. Han, J.; Mantas, P.Q.; Senos, A.M.R.. "Densification and grain growth of Al-doped ZnO". Journal of Materials Research 16 2 (2001): 459-468. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035262048&partnerID=MN8TOARS.
  97. Han, J.; Mantas, P.Q.; Senos, A.M.R.. "Effect of A1 and Mn doping on the electrical conductivity of ZnO". Journal of the European Ceramic Society 21 10-11 (2001): 1883-1886. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034883663&partnerID=MN8TOARS.
    10.1016/S0955-2219(01)00136-4
  98. Han, J.; Mantas, P.Q.; Senos, A.M.R.. "Grain growth in Mn-doped ZnO". Journal of the European Ceramic Society 20 16 (2000): 2753-2758. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034507667&partnerID=MN8TOARS.
  99. Huang, Y.X.; Senos, A.M.R.; Baptista, J.L.. "Thermal and mechanical properties of aluminum titanate-mullite composites". Journal of Materials Research 15 2 (2000): 357-363. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034142468&partnerID=MN8TOARS.
  100. Soares, M.R.; Senos, A.M.R.; Mantas, P.Q.. "Phase coexistence region and dielectric properties of PZT ceramics". Journal of the European Ceramic Society 20 3 (2000): 321-334. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034158832&partnerID=MN8TOARS.
  101. Han, J.; Senos, A.M.R.; Mantas, P.Q.. "Nonisothermal sintering of Mn doped ZnO". Journal of the European Ceramic Society 19 6-7 (1999): 1003-1006. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032689877&partnerID=MN8TOARS.
  102. Soares, M.R.; Senos, A.M.R.; Mantas, P.Q.. "Phase coexistence in PZT ceramics". Journal of the European Ceramic Society 19 10 (1999): 1865-1871. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032629249&partnerID=MN8TOARS.
  103. Huang, Y.X.; Senos, A.M.R.; Baptista, J.L.. "Effect of Excess SiO2 on the Reaction Sintering of Aluminium Titanate-25 vol% Mullite Composites". Ceramics International 24 3 (1998): 223-228. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031675513&partnerID=MN8TOARS.
  104. Huang, Y.X.; Senos, A.M.R.; Rocha, J.; Baptista, J.L.. "Gel formation in mullite precursors obtained via tetraethylorthosilicate (TEOS) pre-hydrolysis". Journal of Materials Science 32 1 (1997): 105-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030834876&partnerID=MN8TOARS.
  105. Huang, Y.X.; Senos, A.M.R.; Baptista, J.L.. "Preparation of an aluminium titanate-25 vol% mullite composite by sintering of gel-coated powders". Journal of the European Ceramic Society 17 10 (1997): 1239-1246. http://www.scopus.com/inward/record.url?eid=2-s2.0-0001704892&partnerID=MN8TOARS.
  106. Correia, R.N.; Magalhães, M.C.F.; Marques, P.A.A.P.; Senos, A.M.R.. "Wet synthesis and characterization of modified hydroxyapatite powders". Journal of Materials Science: Materials in Medicine 7 8 (1996): 501-505. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030220349&partnerID=MN8TOARS.
  107. Mantas, P.Q.; Senos, A.M.R.; Baptista, J.L.. "Varistor-capacitor characteristics of ZnO ceramics". Journal of Materials Science 21 2 (1986): 679-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022659774&partnerID=MN8TOARS.
    10.1007/BF01145541
  108. Senos, A.M.R.; Baptista, J.L.. "Atmosphere effects in the grain boundary region of ZnO varistors". Journal of Materials Science Letters 3 3 (1984): 213-216. http://www.scopus.com/inward/record.url?eid=2-s2.0-1842594314&partnerID=MN8TOARS.
    10.1007/BF00726797
Thesis / Dissertation
  1. Figueiredo, Luis Filipe Santos. "Sinterização FLASH como tecnologia alternativa de sinterização do grés porcelânico". Master, 2019. http://hdl.handle.net/10773/27572.
  2. Alves, Bernardo da Silva. "Novas aproximações para o fabrico por via aditiva de componentes multimaterial". Master, 2018. http://hdl.handle.net/10316/86012.
  3. Durão, Ana Filipa Gomes. "Processamento e caracterização de cermetos à base de Ti(CN) com ligantes de Ni/Co". Master, 2018. http://hdl.handle.net/10773/25150.
  4. Paulo, João António Bóia. "Caracterização de fibras de aço como reforço num betão refratário". Master, 2017. http://hdl.handle.net/10773/22587.
  5. Henriques, Luís Pedro Alves. "Valorização de resíduos de pó de metal duro". Master, 2017. http://hdl.handle.net/10773/21833.
  6. Serrazina, Ricardo Nazaré. "Emulsion Detonation Synthesis (EDS) zirconia-based CERMETs". Master, 2016. http://hdl.handle.net/10773/21884.
  7. Silva, Fernando José Pinheiro Nunes da. "Desenvolvimento de compósitos de WC com ligantes martensíticos". Master, 2016. http://hdl.handle.net/10773/26431.
  8. Almeida, Bibiana Patrícia Simão de. "Análise de defeitos na produção de grés porcelânico". Master, 2016. http://hdl.handle.net/10773/21886.
  9. Almeida, Joel Alexandre Santiago. "Desenvolvimento de um cerâmico Al2O3/TI(C,N) para uso em maquinação". Master, 2015. http://hdl.handle.net/10773/15707.
  10. Davim, Erika Judith Cardoso Rodrigues. "Surface reactivity enhancement of silica-based glass-ceramic scaffolds". PhD, 2015. http://hdl.handle.net/10773/14478.
  11. Fernandes, Manuela Alexandra Coelho. "Estudos de fronteira de grão em titanatos". Master, 2014. http://hdl.handle.net/10773/13635.
  12. Pinho, Carla Maria da Silva. "Desenvolvimento de compósitos de WC com ligantes intermetálicos". Master, 2014. http://hdl.handle.net/10773/12559.
  13. Silva, Vera Liliana Ferreira. "Estudos de molhabilidade de metais no carboneto de tungsténio". Master, 2014. http://hdl.handle.net/10773/12266.
  14. Antunes, Raquel João Fialho. "Práticas de gestão do design para o subsetor nacional de cerâmica utilitária e decorativa". PhD, 2013. http://hdl.handle.net/10773/10236.
  15. Ramalhete, Pedro Miguel Barata de Sousa. "Metodologia de selecção de materiais em design: base de dados nacional". PhD, 2013. http://hdl.handle.net/10773/10669.
  16. Puga, Joel Bento. "WC-(Cu, Fe, Cr, Ni) composites attained by mechanosynthesis". Master, 2013. http://hdl.handle.net/10773/12263.
  17. Amaral, Luís Miguel de Almeida. "Microstructure design of Titanate-based electroceramics". PhD, 2012. http://hdl.handle.net/10773/9877.
  18. Marques, Bruno José Jordão. "O aço inoxidável como ligante no metal duro". Master, 2010. http://hdl.handle.net/10773/2301.
  19. Pérez de la Torre, José Antonio. "Obtaining and characterization of single crystals and ceramics of PZT". PhD, 2009. http://hdl.handle.net/10773/2318.
  20. Mendes, Susana Manuel Soares. "Preparação de argilas para nanocompósitos de polímero/silicatos em camadas". Master, 2009. http://hdl.handle.net/10773/2296.
  21. Davim, Erika Judith Cardoso Rodrigues. "Suportes porosos vítreos do sistema Si-Ca-P-Mg para aplicações biomédicas". Master, 2008. http://hdl.handle.net/10773/2241.
  22. Fernandes, Cristina Maria da Silva. "Sputtering on the production of tungsten carbide based composites". PhD, 2008. http://hdl.handle.net/10773/2316.
  23. Amaral, Luís Miguel de Almeida. "Estudos de sinterização de cerâmicos de titanato de estrôncio não estequiométrico". Master, 2007. http://hdl.handle.net/10773/2244.
  24. Ramalhete, Pedro Miguel Barata de Sousa. "Design e selecção de materiais: novos contributos digitais para uma escolha fundamentada". Master, 2006. http://hdl.handle.net/10773/4954.
  25. Fernandes, Cristina Maria da Silva. "Caracterização e processamento de pós de carboneto de tungsténio revestidos com aço inoxidável". Master, 2002. http://hdl.handle.net/10773/23036.
  26. Fernandes, Cristina Maria da Silva. "Caracterização e processamento de pós de carboneto de tungsténio revestidos com aço inoxidável". Master, 2002. http://hdl.handle.net/10773/4374.
  27. Jiaping Han. "Sintering and electrical properties of Mn-doped and Al-doped ZnO ceramics". Master, 2001. http://hdl.handle.net/10773/24986.
  28. Senos, Ana Maria de Oliveira e Rocha. "Cinética de sinterização nos estágios de porosidade aberta do óxido de zinco". PhD, 1993. http://hdl.handle.net/10773/27514.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2019/03/29 “WC-AISI 304 stainless steel hardmetals: from nanostructured powders to hard materials with enlarged range of properties” 11th International Conference on the Science of Hard Materials- ICSHM11
(Khao Lak, Thailand)
2017/09/07 “Design of nanostructured powders and mechanical properties in WC-AISI 304 stainless steel composites, 11th International conference on Advanced Materials & Processing 11th International conference on Advanced Materials & Processing
(Edimburgo, United Kingdom)
2017/07/06 “Exploring stresses to develop functional nanoceramics by in-situ TEM sintering” Ciência 2017
FCT (Lisboa, Portugal)
2016/01/21 Triggering abnormal grain growth by pressure assisted sintering in BaLa4Ti4O15 EMA 2016 – Electronic Materials Applications
American Ceramic Society (Orlando, United States)
2015/10/10 “Analysis of the Stress Assisted Sintering Effects on the Microstructure of BaLa4Ti4O15” (Plenary session) WCM 2015 – World Congress on Microscopy
(Kottayam, India)
2015/04/22 “Design of grain boundary characteristics in functional titanates” CICMT 2015 - IMAPS/ACerS International Conference and Exhibition on Ceramic Interconnect & Ceramic Microsystems Technologies
(Dresden, Germany)
2013/10/28 “Design of grain boundary characteristics in titanates by using sintering variables” MS&T’13 - Materials Science & Technology 2013
ASM-American Society for Metals (Monreal, Canada)
2013/04/24 “Modulating TC¿r by substrate induced texturization in BaO-Ln2O3-TiO2 thick films” CICMT 2013 - IMAPS/ACerS International Conference and Exhibition on Ceramic Interconnect & Ceramic Microsystems Technologies
(Orlando, United States)
2012/11/28 “Constrained sintering of ceramic layers on rigid substrates”, AMR Senos, Colloquium Series on Sintering and Microstructure Development, Aveiro. Portugal. 28th November 2012. Colloquium Series on Sintering and Microstructure Development
University of Aveiro (Aveiro, Portugal)
2012/10/03 “Interface transitions and retrograde solubility in Ti-rich strontium titanate” Workshop on Interfaces
(Bear Creek Mountain, United States)

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2021/12/10 Aqueous colloidal processing of W and WC-based composites, sintering and mechanical properties at high temperature
(Thesis) Main arguer
Esperanza Macarena Ayala (PhD)
Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos, Spain
2021/07/15 Mechanical integrity of ceramic-metal composite materials: influence of microstructure and processing route
(Thesis) Main arguer
Maria de Nicolás Morillas (PhD)
Universidad Carlos III de Madrid, Spain
2021/01/21 Uranium Carbide nanofibers targets for increased stability and extraction yield of alpha-emitting radioisotopes
(Thesis) Main arguer
SANJIB CHOWDHURY (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/07/21 Caracterização Tribológica de Carboneto de Tungsténio Sinterizado: Influência da Fase Ligante
(Thesis) Main arguer
Jorge Miguel Nobre Sequeira (Master)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2020/01/20 Laser assisted printing of micro communication systems for smart implants
(Thesis) Main arguer
Caroline Gomes Moura (PhD)
Universidade do Minho, Portugal