???global.info.a_carregar???
Sara Guerreiro is a PhD student in Biomedical Engineering at the Faculty of Engineering of the University of Porto. In 2016, Sara was an intern in the Biomedical Electronics research group of Universitat Pompeu Fabra at Barcelona where she worked on numerical studies for the simulation of implantable neuroprosthetics behaviour. In 2018, she has received her integrated master's degree in Biomedical and Biophysics Engineering from the Faculty of Sciences of the University of Lisbon, with a master thesis titled "Automating daily Linac quality control using portal images". During this period, Sara Guerreiro worked in collaboration with the Radiation Oncology Department of Champalimaud Clinical Centre, developing image-based quantitative methods for radiotherapy quality control. In 2019, Sara joined the Biofabrication Group of Polytechnic of Leiria for the development of novel equipment for manufacturing drug-delivery systems for several medical applications. Nowadays, she works as a PhD student at the Faculty of Engineering of the University of Porto in collaboration with Polytechnic of Leiria and IPO-Porto to develop and optimize gastroretentive implantable materials for the local enhancement of the radiotherapy effect.
Identificação

Identificação pessoal

Nome completo
Sara Guerreiro
Data de nascimento
1995/05/13
Género
Feminino

Nomes de citação

  • Sara F. C. Guerreiro

Identificadores de autor

Ciência ID
7219-29B5-2DDF
ORCID iD
0000-0002-6652-2376

Endereços de correio eletrónico

  • sara.f.guerreiro@ipleiria.pt (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Nanotecnologia
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais
  • Ciências da Engenharia e Tecnologias - Engenharia Médica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês Utilizador independente (B2) Utilizador independente (B2) Utilizador independente (B2) Utilizador independente (B2)
Espanhol; Castelhano Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1)
Alemão Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1)
Formação
Grau Classificação
2020/09 - 2024/09
Em curso
Programa Doutoral em Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2021/03/19
Concluído
Advanced Drug Delivery (Curso de doutoramento (conclusão de unidades curriculares))
Universidade de Lisboa Faculdade de Farmácia, Portugal
2013/09 - 2018/12
Concluído
Biomedical and Biophysics Engineering (Mestrado integrado)
Especialização em Profile Clinical Engineering and Medical Instrumentation
Universidade de Lisboa Faculdade de Ciências, Portugal
"Automating daily Linac using portal images (Grade: 19/20)" (TESE/DISSERTAÇÃO)
16/20
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento
Empregador
2021/10/01 - Atual Estagiário de Investigação (Investigação) Universidade do Porto, Portugal
Universidade do Porto, Portugal
2019/06/05 - 2021/09/30 Estagiário de Investigação (Investigação) Instituto Politécnico de Leiria, Portugal
Instituto Politécnico de Leiria, Portugal

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
2017/10 - 2018/12 Intern Centro Champalimaud, Portugal
Centro Champalimaud, Portugal
2016/07 - 2016/09 Undergraduate Intern Universitat Pompeu Fabra, Espanha
Universitat Pompeu Fabra Departament de Tecnologies de la Informació i les Comunicacions, Espanha
2014/03 - 2014/03 Undergraduate Intern Hospital Garcia de Orta EPE, Portugal
Hospital Garcia de Orta EPE, Portugal
Projetos

Bolsa

Designação Financiadores
2020/10/01 - 2021/09/30 C.Orthopedics - Moulding Composites for Orthopedics Applications
POCI-01-0247-FEDER-039754
Bolseiro de Investigação
Instituto Politécnico de Leiria, Portugal
Agência Nacional de Inovação SA
Em curso
2019/06/05 - 2020/06/30 iFilm - Multifunctional Films for Intelligent and Active Applications
Bolseiro de Investigação
Instituto Politécnico de Leiria, Portugal
Agência Nacional de Inovação SA
Concluído

Outro

Designação Financiadores
2020/06/15 - Atual SpinningTNT - Linha de produção de TNT por electrospinning
POCI-01-02B7-FEDER-069285
Bolseiro de Investigação
Instituto Politécnico de Leiria, Portugal
Agência Nacional de Inovação SA
Em curso
Produções

Publicações

Artigo em conferência
  1. Carolina A. M. Ferreira; Sara F. C. Guerreiro; Nuno Alves; Artur Mateus; Juliana R. Dias. "Influence of MgO/CuO Nanoparticles Dispersion Methodology on the Electrospun Fiber’s Properties". 2022.
    10.3390/materproc2022008125
Artigo em revista
  1. Sara F. C. Guerreiro; Carolina A. M. Ferreira; Joana F. A. Valente; Tatiana M. F. Patrício; Nuno M. F. Alves; Juliana R. Dias. "Electrospun-Based Membranes as a Key Tool to Prevent Respiratory Infections". Polymers (2022): https://doi.org/10.3390/polym14183787.
    10.3390/polym14183787
  2. Carolina A. M. Ferreira; Sara F. C. Guerreiro; Joana F. A. Valente; Tatiana M. F. Patrício; Nuno Alves; Artur Mateus; Juliana R. Dias. "Advanced Face Mask Filters Based on PCL Electrospun Meshes Dopped with Antimicrobial MgO and CuO Nanoparticles". Polymers (2022): https://doi.org/10.3390/polym14163329.
    10.3390/polym14163329
  3. Sara F. C. Guerreiro; Anabela G. Dias; Pedro L. Granja; Juliana R. Dias. "Gastroretentive Electrospun Nanofibers Used in Gastric Wall Wound Healing". Materials Proceedings (2022): https://www.mdpi.com/2673-4605/8/1/48.
    10.3390/materproc2022008048
  4. Guerreiro, Sara F. C.; Joana F. A. Valente; Juliana R. Dias; ALVES, NUNO. "Box-Behnken Design a Key Tool to Achieve Optimized PCL/Gelatin Electrospun Mesh". Macromolecular Materials and Engineering (2021): http://dx.doi.org/10.1002/mame.202000678.
    Publicado • 10.1002/mame.202000678
  5. João Reboleira; Pedro Adão; Sara F. C. Guerreiro; Juliana R. Dias; Rui Ganhão; Susana Mendes; Mariana Andrade; et al. "Poultry Shelf-Life Enhancing Potential of Nanofibers and Nanoparticles Containing Porphyra dioica Extracts". Coatings 10 4 (2020): 315-315. https://doi.org/10.3390/coatings10040315.
    Publicado • 10.3390/coatings10040315
Poster em conferência
  1. Sara F. C. Guerreiro; Juliana R. Dias; Joana Valente; ALVES, NUNO. "A Design of Experiment methodology to study the influence of production conditions in the behaviour of PCL/gelatin electrospun skin wound dressings". Trabalho apresentado em 31st Conference of the European Society for Biomaterials (ESB), 2021.
  2. Juliana R. Dias; Alexandra I. F. Alves; Carolina A. Marzia-Ferreira; Sara F. C. Guerreiro; Nuno M. F. Alves. "Electrospun structures as a key tool to mimic the native skin ECM". Trabalho apresentado em World Biomaterials Congress 2020, 2020.
Resumo em conferência
  1. Sara F. C. Guerreiro; Juliana R. Dias; Fábio Gameiro; Vicente Caneiro; João Reboleira; Mariana Andrade; Pedro Adão; et al. "Polypropylene films coated with electrospun nanofibers of porphyra dioica/gelatin/PVA for food packaging applications". Trabalho apresentado em International Conference on Quality Innovation and Sustainability, 2021.
    Aceite para publicação
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2020/11/19 Polypropylene films coated with electrospun nanofibers of porphyra dioica/gelatin/PVA for food packaging applications International Conference on Quality Innovation and Sustainability
ESTG Polytechnic of Leiria (Leiria, Portugal)

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2016/09 - 2017/04 The Workshop on Biomedical Engineering (WBME) takes place during the 2nd semester, at the Faculty of Sciences of the University of Lisbon. Since 2009 the Nucleo of students of Biomedical Engineering (NE2B2) and the Institute of Biophysics and Biomedical Engineering (IBEB) organize the annual edition of WBME. The event has a full day of lectures by national and international speakers from the most diverse areas of Biomedical Engineering, and several workshops (more info: http://wbme.fc.ul.pt/). (2017/04)
Oficina (workshop) (Membro da Comissão Organizadora)
Universidade de Lisboa Faculdade de Ciências, Portugal

Participação em evento

Descrição da atividade
Tipo de evento
Nome do evento
Instituição / Organização
2020/11/06 - Atual Diabetic retinopathy grading in eye fundus images, conducted by Dr. Teresa Araujo
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/10/30 - Atual Computational Image Analysis in Biomedical Engineering, conducted by Prof. Dr. João Tavares
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/10/23 - Atual Detection of lung nodules in computed tomography images, conducted by Gulherme Aresta
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/10/20 - Atual Computational Mechanics Applied to Biomechanics, conducted by Prof. Dr. Marco Parente
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/10/16 - Atual Engineering graphene-containing materials for biomedical applications, conducted by Prof. Dr. Inês C. Gonçalves
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/10/09 - Atual The one step solution for chronic bone infections, conducted by Prof. Dr. Fernando Mendes Monteiro
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/10/02 - Atual State-of-the-art technologies to measure and modulate neuronal circuits dynamics, conducted by Prof. Dr. Paulo de Castro Aguiar
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2021/02/01 - 2021/02/02 Good Practices in In Vitro Research
Oficina (workshop)
i3S Course
Universidade do Porto Instituto de Investigação e Inovação em Saúde, Portugal
2021/01/27 - 2021/01/27 Scientific Writing and Publishing: Partical tips from an editor for you article to succeed, conducted by Maria J. Jerez, PhD (Ex-editor Nature)
Oficina (workshop)
CICS-UBI
Universidade da Beira Interior Centro de Investigação em Ciências da Saúde, Portugal
2020/11/27 - 2020/11/27 Microfluidics - A micro system of macro importance, conducted by Dr. Estrela Neto
Seminário
Seminars in Biomedical Engineering
Universidade do Porto Faculdade de Engenharia, Portugal
2020/04/04 - 2020/04/05 The symposium was organized with the purpose of presenting the most recent biomedical and biological advances (more info: https://www.symposium.nebfeupicbas.pt/)
Simpósio
XI Symposium on Bioengineering
Universidade do Porto, Portugal
2019/11/13 - 2019/11/13 Research Ethics for Integrity of Science, conducted by Siarhei Piashkun
Seminário
EACEA Agency - European Commission
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2019/10/10 - 2019/10/10 Maths for digital factory, conducted by Dietmar Homberg
Seminário
European Consortium for Mathematics in Industry
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2019/08/06 - 2019/08/06 Electric fields in the human central nervous system: computational models of new non-invasive techniques, conducted by Pedro Cavaleiro Miranda
Seminário
CDRSP Seminars 2019
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2019/07/31 - 2019/07/31 Ongoing R&D at ALLAB - Challenges & Opportunities, conducted by Prof. Ana Gouveia and Prof. Nuno Pombo
Seminário
CDRSP Seminars 2019
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2017/10/26 - 2017/10/27 Imaging Hallmarks of Cancer (Level III - ASKLEPIOS COURSE)
Conferência
European School of Radiology (ESOR)
European School of Radiology, Áustria

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2021/07/20 - Atual Macromolecular Materials and Engineering (1439-2054) Wiley-VCH GmbH, Weinheim
Distinções

Outra distinção

2021 PhD Research Scholarship
Fundação para a Ciência e a Tecnologia, Portugal