???global.info.a_carregar???
Tomás, since an early stage of his academic path, was curious about manufacturing process. As such, on his 3rd year, he was part of an internship at CENIMAT under the supervison of Dr. Elvira Fortunato, where he developed a biossensor for glucose detection. He gained interest in microelectronics on solar cells. Such interest, lead him to develop his master thesis at INL, under the supervision of Dr.Pedro Salomé. Tomás was responsible for developing a novel structure for ultrathin CIGS, that is currently for a new patent at INL. The current interest of Tomás are the following: solar cells, renewable energy, microfabrication, nanotechnology and microelectronics.
Identificação

Identificação pessoal

Nome completo
Tomás Lopes

Nomes de citação

  • Lopes, Tomás
  • Tomás Sousa Lopes
  • T.S.Lopes

Identificadores de autor

Ciência ID
DA1B-E199-40AF
ORCID iD
0000-0002-1266-386X

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Nanotecnologia

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2019/06/03 - 2023/06/03
Em curso
Doctor in Enginnering Technology (Doktor (PhD))
Universiteit Hasselt, Bélgica
2018/10/09
Concluído
Mestrado Integrado em Micro e Nanotecnologia (Mestrado)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
"Metal layer of enhancing optical reflection in passivation layers in thin film solar cels " (TESE/DISSERTAÇÃO)
16
2017
Concluído
Mestrado Integrado em Micro e Nanotecnologias (Licenciatura)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
"NA" (TESE/DISSERTAÇÃO)
13
Percurso profissional

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
2019/11/01 - Atual MPA - PHD student International Iberian Nanotechnology Laboratory, Portugal
2018/12/03 - 2019/10/31 Reasearch Associate with the project "Development of Passivation Interface Strategies for Semiconductors" International Iberian Nanotechnology Laboratory, Portugal
Produções

Publicações

Artigo em conferência
  1. Lopes, Tomás. "Ultrathin CIGS Solar Cells with Passivated and Highly Reflective Back Contacts – : Results from the ARCIGS-M Consortium". 2019.
    10.4229/EUPVSEC20192019-3AO.8.1
Artigo em revista
  1. Tomás S. Lopes; Jessica de Wild; Célia Rocha; André Violas; José M.V. Cunha; Jennifer P. Teixeira; Marco A. Curado; et al. "On the Importance of Joint Mitigation Strategies for Front, Bulk, and Rear Recombination in Ultrathin Cu(In,Ga)Se2 Solar Cells". ACS Applied Materials & Interfaces 13 23 (2021): 27713-27725. https://doi.org/10.1021/acsami.1c07943.
    10.1021/acsami.1c07943
  2. Lopes, Tomás. "High-Performance and Industrially Viable Nanostructured SiOx Layers for Interface Passivation in Thin Film Solar Cells". Solar RRL n/a n/a (2021): 2000534-2000534. https://onlinelibrary.wiley.com/doi/abs/10.1002/solr.202000534.
    https://doi.org/10.1002/solr.202000534
  3. Lopes, Tomás. "Encapsulation of Nanostructures in a Dielectric Matrix Providing Optical Enhancement in Ultrathin Solar Cells". Solar RRL 4 11 (2020): 2000310-2000310. https://onlinelibrary.wiley.com/doi/abs/10.1002/solr.202000310.
    https://doi.org/10.1002/solr.202000310
  4. Lopes, Tomás. "Front passivation of Cu(In,Ga)Se2 solar cells using Al2O3: Culprits and benefits". Applied Materials Today 21 (2020): 100867-100867. https://www.sciencedirect.com/science/article/pii/S2352940720303152.
    https://doi.org/10.1016/j.apmt.2020.100867
  5. Jose M. V. Cunha; Paulo A. Fernandes; Pedro M. P. Salome; Tomas S. Lopes; Sourav Bose; Adam Hultqvist; Wei-Chao Chen; et al. "Decoupling of Optical and Electrical Properties of Rear Contact CIGS Solar Cells". IEEE Journal of Photovoltaics 9 6 (2019): 1857-1862. https://doi.org/10.1109%2Fjphotov.2019.2933357.
    10.1109/jphotov.2019.2933357
  6. Lopes, Tomás. "Rear Optical Reflection and Passivation Using a Nanopatterned Metal/Dielectric Structure in Thin-Film Solar Cells". IEEE Journal of Photovoltaics (2019): http://dx.doi.org/10.1109/jphotov.2019.2922323.
    10.1109/jphotov.2019.2922323
  7. Sourav Bose; José M. V. Cunha; Sunil Suresh; Jessica De Wild; Tomás S. Lopes; João R. S. Barbosa; Ricardo Silva; et al. "Optical Lithography Patterning of SiO2 Layers for Interface Passivation of Thin Film Solar Cells". Solar RRL 2 12 (2018): 1800212-1800212. https://doi.org/10.1002%2Fsolr.201800212.
    10.1002/solr.201800212
Poster em conferência
  1. Song, Min; Yin, Guanchao; Fumagalli, Paul; Schmid, Martina. "Local characterization of light trapping effects of metallic and dielectric nanoparticles in ultra-thin Cu(In,Ga)Se2 solar cells via scanning near-field optical microscopy". Trabalho apresentado em EMRS, 2019.
    10.1117/12.2253223
  2. Lopes, Tomás. "Sub-micrometre Line Contacts on SiO2 Layers for Interface Passivation of Ultra-Thin Film Solar Cells". Trabalho apresentado em EMRS, 2019.
  3. Lopes, Tomás. "Novel strategies to enhance the rear optical and electrical properties of ultrathin Cu(In,Ga)Se2solar cells,". 2019.
  4. Lopes, Tomás. "Novel rear architecture for enhancing light trapping in Cu(In,Ga)Se2 ultrathin solar cells". Trabalho apresentado em Materiais 2019, 2019.
  5. Herguth, Axel. "New Solar Cell Architectures". 2018.
    10.1063/1.5123891
  6. Lopes, Tomás. "Advanced Optoelectronic Characterization and Novel Materials". 2018.
  7. Lopes, Tomás; J.M.V.Cunha; Pedro Manuel Parracho Salomé; Sourav Bose; Paulo A. Fernandes. "Comparison of several deposition methods, including ALD, for metal-insulator-semiconductor structures to be used in thin film solar cells". Trabalho apresentado em Herald Summit, 2018.
  8. Lopes, Tomás; José M. V. Cunha; Pedro M. P. Salomé; Jerome Borne; Paulo A. Fernandes; Sourav Bose. "Interface Passivation of ultrathin Cu(In,Ga)Se2 solar cell by ALD deposited Al2O3". Trabalho apresentado em Herald Summit, 2018.
Atividades

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2018/06/02 - Atual During Tomás Lopes stay at INL, he was able to get autonomous quickly in the manufacturing process. Thus, he was able to be the practical supervisor of 2 summers students ( June- August) and 4 students that did the internship at in INL. Such activities gave him hand on experience at guiding students during the process that we apply at the INL cleanroom.
Coorientador

Expedição científica

Descrição da atividade Instituição / Organização
2020/01/13 - 2020/01/24 For two weeks, Tomás stayed at Obducat AB, leading company for Nanoimprint servies, to learn processes and implement them for this PhD project at INL and UHasselt. During his stay, Tomás was able to learn about thermal, uv and simultaneous thermal and UV nanoimprint processes- Obducat AB, Suécia