???global.info.a_carregar???
Tatiana MF Patrício is PhD Integrated Researcher and member of the scientific board of the Centre for Rapid and Sustainable Product Development (CDRSP-PL), PT. She is the PI of the project ‘‘BioRobotBeads, ERDF/Portugal 2020/COMPETE, No. 47081”, is member team of several IDI projects and she is responsible of Materials Chemistry and Materials Characterisation Laboratory. She has a first degree in Biomechanics and Master´s degree in Engineering Design and Product Development, both obtained in the School of Technology and Management of the Polytechnic Institute of Leiria. From 2009 to 2014, she carried out research activities in CDRSP-Polytechnic Leiria, with the focus on scaffolds fabrication by additive manufacturing; IDI projects development; writing projects applications and she was also responsible of the characterisation materials laboratory. In 2014, she received a Marie Curie Research Fellowship denominated as ¿Development of superparamagnetic scaffolds for Bone Tissue Engineering¿ of the European Project Bio inspired Bone Regeneration, G.A. Nº 607051. The best-in-class strategies to obtain bio-inspired superparamagnetic hybrid microspheres for bone tissue engineering were investigated in the Institute of Science and Technology for Ceramics, (Faenza, IT). In 2017, she was awarded the PhD degree in Biomedical Sciences, and she has successfully accomplished all the requirements for the label ¿Doctor Europaeus¿ as stated in the UNIBO Internal regulation (Università di Bologna). She has been the opportunity to collaborate with multi-disciplinary partners (industrial and academic) with high reputation on bone regeneration approaches, and she developed research work in Fujifilm Europe B.V. (Tilburg, NL), in Rizzoli Orthopaedic Institute (Bologna, IT) and in Erasmus Medical Center (Rotterdam, NL). She has been participated in several National and European projects funded by Portuguese Foundation for Science and Technology, Portuguese National Innovation Agency, FP7, H2020, among others. She has been attended to numerous international conferences, as oral speaker, she is author or co-author of several scientific papers, chapters, co-author of 3 national patents and 1 international patent, invited as reviewer of scientific journals and tutoring several young researchers. SCIENTIFIC SKILLS: Synthesis of biomaterials: polymers, ceramics, composites, magnetic composites. Characterisations: Chemical (FT-IR, UV-vis, X-ray diffraction, ICP-OES); Thermal (DSC-TGA); Physical (DLS, zeta-potential, contact angle); Magnetic (Susceptometer balance); Morphological (µ-CT, SEM, Optical and fluorescence microscopy); Biological studies (cell culture (mouse cells; human mesenchymal stem cells); XTT, MTT, Annexin V/PI, ROS, Live&Dead; H&E, thionin, phalloidin staining¿s, western blot, qPCR, microtome). Scaffolds/ prototypes fabrication: bioextrusion, micro-stereolithography, Freeze-drying process. Micro/ nano spheres production: Emulsification (water/oil) & Biomineralisation process. Software: MagicPlot; GraphPad; Image J; Photoshop; SolidWorks. MAIN INTEREST AREAS are biomimetics, synthesis and characterisation of biomaterials, magnetic biomaterials, handling of mouse and human cells, tissue engineering, biomedical devices for bone tissue regeneration, additive biomanufacturing, IDI projects and industry 4.0. MAJOR COLLABORATIONS: Dr. Antonio Gloria, Bone tissue engineering, - National Research Council of Italy (IPCB-CNR); Dr. Lino Ferreira, IDI Projects, in vitro and in vivo studies, Center for Neuroscience and Cell Biology of the University of Coimbra (CNC), Portugal; Dr. Eric Farrell, Bone Tissue Engineering, Erasmus Medical Center, Rotterdam, The Netherlands; Dr. Simone Sprio, Biomaterials, Institute of Science and Technology for Ceramics, Faenza, Italy; Dr. Monica Montesi and Dr. Silvia Panseri, In vitro studies, Institute of Science and Technology for Ceramics, Faenza, Italy; Dr. Gloria Rodríguez, Chemical Engineering, Un. Granada, ES
Identificação

Identificação pessoal

Nome completo
Tatiana Marisa Fernandes Patrício

Nomes de citação

  • Fernandes Patrício, Tatiana Marisa

Identificadores de autor

Ciência ID
EF1C-430E-9F29
ORCID iD
0000-0003-0672-9014
Google Scholar ID
https://scholar.google.com/citations?user=JpUSB40AAAAJ&hl=en
Researcher Id
L-2781-2015
Scopus Author Id
55749853300

Endereços de correio eletrónico

  • tatiana.patricio@ipleiria.pt (Profissional)

Telefones

Telemóvel
  • 912955664 (Pessoal)

Moradas

  • Rua do Vale, n 214, Várzeas, Souto da Carpalhosa, 2425-900, Leiria, Leiria, Portugal (Pessoal)

Domínios de atuação

  • Ciências Médicas e da Saúde - Biotecnologia Médica - Biomateriais
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais
  • Ciências da Engenharia e Tecnologias - Outras Ciências da Engenharia e Tecnologias
  • Ciências da Engenharia e Tecnologias - Outras Ciências da Engenharia e Tecnologias
  • Ciências da Engenharia e Tecnologias - Nanotecnologia - Nanomateriais
  • Ciências Naturais - Ciências Biológicas - Biologia Celular
  • Ciências da Engenharia e Tecnologias

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Italiano Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1)
Formação
Grau Classificação
2017
Concluído
Dottorato di Ricerca in Scienze Biomediche / PhD in Biomedical Sciences (Doutoramento)
Especialização em Magnetic scaffolds for bone regeneration
Università degli Studi di Bologna, Itália
"NOVEL, BIO-INSPIRED SUPERPARAMAGNETIC HYBRID MICROSPHERES FOR BONE TISSUE ENGINEERING" (TESE/DISSERTAÇÃO)
Merit award as Doctor Europaeus
2015/05 - 2015/06
Concluído
English course in biomedical area (Outros)
ALMA MATER STUDIORUM UNIVERSITÀ DI BOLOGNA, Itália
2014/10 - 2014/12
Concluído
English course (Outros)
Today School of English, Itália
2012 - 2012
Concluído
English course (Outros)
Eurolínguas, Portugal
2011
Concluído
Master’s degree in Engineering Design and Product Development (Mestrado)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
"Fabrication and characterization of 3D structures of PCL and PCL/PLA for applications in Tissue Engineering " (TESE/DISSERTAÇÃO)
19/20
2010/01 - 2010/03
Concluído
Pedagogical Training of Trainers (CAP) (Diploma de especialização)
Instituto de Emprego e Desenvolvimento Profissional, Portugal
2009/05 - 2009/11
Concluído
English course (Outros)
InEnglish, Portugal
2005 - 2008
Concluído
Biomechanics (Licenciatura)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
"Hydrogels: Characterisation and Drug Delivery system" (TESE/DISSERTAÇÃO)
15/20
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento
Empregador
2021/07/05 - Atual Investigador Contratado (Investigação) Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2019/06/30 - 2021 Pós-doutorado (Investigação) Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2014/03/01 - 2017/02/28 Investigador Contratado (Investigação) Institute of Science and Technology for Ceramics - National Research Council, Itália
Institute of Science and Technology for Ceramics - National Research Council, Itália
2013/04/01 - 2014/02/14 Estagiário de Investigação (Investigação) Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2011/06/01 - 2013/03/01 Investigador (Investigação) Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2009/03/01 - 2011/06/01 Investigador (Investigação) Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal

Cargos e Funções

Categoria Profissional
Instituição de acolhimento
Empregador
2021/09 - Atual Responsible of the Materials Chemistry Laboratory Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2021/09 - Atual Responsible of Materials Characterisation Laboratory Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2016/09/26 - 2016/12/09 PhD activity: to evaluate the effect of polymeric and hybrid magnetic microspheres on the viability and differentiation of human mesenchymal stem cells; rhBMP-2 release and bioactivity studies. Erasmus Medical Centre, Países Baixos
2016/06/01 - 2016/07/31 PhD activity: to evaluate the mechanical properties of hybrid magnetic scaffolds and regenerated tissue by using nanoindentation. Rizzoli Orthopaedic Institute, Itália
Rizzoli Orthopaedic Institute, Itália
2014/07/01 - 2014/07/31 PhD activity: to develop new biomaterials and microspheres production through emulsification process Fujifilm Manufacturing Europe B.V., Países Baixos
Fujifilm Manufacturing Europe B.V., Países Baixos
2011/01/01 - 2014/02/14 Co-Responsible of Materials Characterisation Laboratory Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2010/09 - 2010/10 Master thesis activity: Chemical characterisation of PCL and PCL/PLA scaffolds Blackwell's Reading University, Reino Unido

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
2018/02/01 - Atual PhD Integrated Researcher Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2017/10/02 - 2019/03/31 R&D Project Coordinator ATT - Advanced Tool Technology, Portugal
ATT - Advanced Tool Technology, Portugal
Projetos

Bolsa

Designação Financiadores
2022 - Atual PREDICTOS: Strengthening excellence for advanced osteosarcoma's predictive models (Submitted)
Submitted
Investigador responsável
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2021 - Atual BioRobotBeads: Robotic system for biomaterials and particles production, Principal investigator
47081, 4.64/5
Investigador responsável
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Agência Nacional de Inovação SA
Em curso
2021 - Atual Mag-joint: New tailored therapy composed of magnetically activated gradient scaffold and magnetic stimulation for subchondral bone disorders
Not Funding
Investigador responsável
2021 - Atual OP-SMARTherapy: Stimuli-responsive injectable bone-like magnetic scaffolds for prevention of osteoporosis related fractures
Not Funding
Investigador responsável
2021 - Atual 3D-OsteoMagtherapy: From healthy bone tissue to osteosarcoma on chip: 3D bone-like magnetic scaffolds with chemotherapeutic and osteoimmunomodulatory features
Not Funding, 7.98/10
Investigador responsável
2019 - Atual MATIS – Materials and Sustainable Industrial Technologies
CENTRO-01-0145-FEDER-000014 - 3362
Bolseiro de Pós-Doutoramento
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Agência Nacional de Inovação SA
Em curso
2019 - Atual S4Plast | Sustainable Plastics Advanced Solutions
46089
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Agência Nacional de Inovação SA
Em curso
2019 - Atual FLY.PT
46079
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Agência Nacional de Inovação SA
Em curso
2020 - 2020/05/16 INTUBATION SHIELD: Sistemas de escudos para blocos operatórios e unidades de cuidados intensivos (UCI)
613745408, Not Funding
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2020 - 2020/04/28 Magnetically-driven therapeutic agents from bio-inspired 4D magnetic platforms for bone tissue regeneration
PTDC/CTM-CTM/3703/2020, Not Funding, 6.45/10
Investigador responsável
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2020 - 2020/04/28 Fabricação aditiva aplicada ao desenvolvimento de ferramentas cromatográficas avançadas
PTDC/EME-SIS/2651/2020 (team member), rejected
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2020 - 2020/04/28 Sistema integrado para o fabrico de estruturas 3D multiescala e multifuncionais para electrospinning simultâneo convencional ao electrospinning assistido por ar
PTDC/EME-SIS/1138/2020 (team member), Not Funding
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2020 - 2020/04/28 JointBiomas - Novo sistema de biofabricação aditiva para produção de scaffolds hierárquicos multi-tecido aplicados no tratamento de doenças articulares
PTDC/EME-SIS/1018/2020 (team member), Not Funding
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2020 - 2020/04/05 INTUBATION SHIELD: Sistemas de escudos para blocos operatórios
596887372, Not Funding
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2020 - 2020/02/20 Mag-OstInspire: Tailored MAGnetic bio-INSPIREd 4D micro and nano platforms for BONE diseases
Not Funding, 7.44/10
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2020 - 2020/01/14 MAGnetic field-responsive nanoTHERapeutics for OSteosarcoma
956513, Not Funding, 82.4/100
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
EU Framework Programme for Research and Innovation Marie Sklodowska-Curie Actions
Em curso
2019 - 2019/10/16 V3NUS - Bio-inspired and biosensing theranostics for breast cancer and tissue regeneration
Not Funding, 66/100
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
European Research Council
Desativado
2019 - 2019/05/01 MagTherOs - MAGnetic field-responsive nanoTHERapeutics for OSteosarcoma
Not Funding, 73/100
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
European Commission
Em curso
2019 - 2019/02/16 Mag-OstInspire: Tailored MAGnetic bio-INSPIREd 4D micro and nano platforms for BONE diseases
Not Funding, 8.1/10
Investigador Pós-doutorado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
2016 - 2017/02/28 Cardio Ultraefficient nanoParticles for Inhalation of Drug prOducts - CUPIDO
720834
Desenvolvimento técnico
Istituto di Scienza e Tecnologia dei Materiali Ceramici Consiglio Nazionale delle Ricerche, Itália
EU Framework Programme for Research and Innovation Nanotechnologies Advanced Materials Advanced Manufacturing and Processing and Biotechnology
Em curso
2013 - 2017/02/28 BIO INSPIRED BONE REGENERATION
info:eu-repo/grantAgreement/EC/FP7/607051/EU
Bolseiro de Doutoramento
Istituto di Scienza e Tecnologia dei Materiali Ceramici Consiglio Nazionale delle Ricerche, Itália
European Commission
Concluído
2014 - 2016/12/31 Italian Flagship Project NANOMAX – miRnano
Progetto Bandiera MIUR PNR 2011–2013
Desenvolvimento técnico
Istituto di Scienza e Tecnologia dei Materiali Ceramici Consiglio Nazionale delle Ricerche, Itália
Programma Nazionale della Ricerca 2011-2013
Concluído
2010 - 2014/02/14 Materializa! da Ideia ao Real
na
Bolseiro de Mestrado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Ciência Viva
Concluído
2011 - 2013/03/01 Micro stereo-thermo-litography multimaterial
PTDC/EME-PME/098037/2008
Bolseiro de Investigação
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2009 - 2011/06/01 Scaffolds Fabrication and Optimization for tissue engineering
na
Bolseiro de Mestrado
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído

Projeto

Designação Financiadores
2021 - Atual TAILORED.COOLING - Add rapid hot&cooling strategies to additive and subtractive manufacturing of ultra efficient metallic inserts for injection moulding of high quality tailored thermoplastic parts
032436
Investigador
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2017 - 2019/04/06 ARTTE
37457
Coordination
ATT – Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Em curso

Outro

Designação Financiadores
2021 - Atual Plano de Recuperação e Resiliência
To be defined
Investigador
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2018 - 2019/04/06 On-surf
24521
Coordination
ATT - Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Em curso
2018 - 2019/04/06 BEE2B
33812
Coordination
ATT - Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Em curso
2018 - 2019/04/06 Add.Additive
24533
Coordination
ATT - Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Em curso
2018 - 2019/04/06 Tooling 4G
24516
Coordination
ATT - Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Em curso
2017 - 2019/04/06 Insitu.BIOMAS
17771
Coordination
ATT - Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Concluído
2017 - 2019/04/06 Next.Parts
17963
Coordination
ATT - Advanced Tool Technology, Portugal
Agência Nacional de Inovação SA
Concluído
2013 - 2014/02/14 SafetyGreen
na
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
National Strategic Reference Framework (IAPMEI)
Concluído
2013 - 2014/02/14 HybridCork
na
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
National Strategic Reference Framework (IAPMEI)
Concluído
2012 - 2014/02/14 Biomas II - Bio Additive Manufacturing & Engineering of Heterogeneous 3D Structures
23147
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Portuguese Agency for Innovation
Concluído
2012 - 2013/12/31 mmBioextruder4blends - Mini Extrusora para misturas de materiais
na
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
National Strategic Reference Framework (IAPMEI)
Concluído
2012 - 2013/12/31 RE2OP - Research to Optimal Product
na
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
National Strategic Reference Framework (IAPMEI)
Concluído
2012 - 2013/12/31 InnovCom - Engenharia e Fabrico de componentes de elevado desempenho
na
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
National Strategic Reference Framework (IAPMEI)
Concluído
2011 - 2012/12/31 Strategic Project UI 4044
Pest-OE/EME/UI4044/2011
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010 - 2011/12/31 TOOLINGEDGE
na
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Portuguese Agency for Innovation
Concluído
2009 - 2011/12/31 Biomas – Bio Manufacturing & Engineering of Scaffolds
3088
Desenvolvimento técnico
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
Portuguese Agency for Innovation
Concluído
Produções

Publicações

Artigo em conferência
  1. Fernandes Patrício, Tatiana Marisa; Domingos, M.; Gloria, A.; Bártolo, P.J.. "Morphological and Mechanical behaviour of PCL/PLA scaffolds: the effect of the blend preparation method". Trabalho apresentado em 5th International Conference on Polymer Behavior (ICPB5), Multiphysics Approaches for the behavior of polymer and polymer-based nanomaterials, Aveiro, 2012.
    Aceite para publicação
  2. Fernandes Patrício, Tatiana Marisa; Domingos, M.; Coelho, J.; Gloria, A.; Bártolo, P.J.. "Physical blending for produce scaffolds for tissue engineering applications". Trabalho apresentado em International Conference on Additive Technologies – ICAT 2012, Maribor, 2012.
    Publicado
  3. Fernandes Patrício, Tatiana Marisa; Domingos, M.; Coelho, J.; Gloria, A.; Bártolo, P.J.. "Biocell printing: scaffold characterisation for cell growth". Trabalho apresentado em 1st International Conference on Design and Processes for Medical Devices, Brescia, 2012.
    Publicado
  4. Fernandes Patrício, Tatiana Marisa; Domingos, M.; Gloria, A.; Geoffrey M.; Bártolo, P.J.. "PCL and PCL/PLA scaffolds for tissue engineering applications". Trabalho apresentado em European Forum on Rapid Prototyping – Rapid Prototyping & Manufacturing, Paris, 2011.
  5. Fernandes Patrício, Tatiana Marisa; Domingos, M.; Glória, A.; Geoffrey M.; Bártolo, P.J.. "Morphological and physical characterisation of PCL and PCL/PLA scaffolds for tissue engineering". Trabalho apresentado em ECCOMAS – International conference on Tissue Engineering, Lisbon, 2011.
  6. Fernandes Patrício, Tatiana Marisa; Domingos, M.; Bártolo, P.J.. "PCL/PLA scaffolds to bone tissue regeneration". Trabalho apresentado em 4º National Congress of Biomechanics, Coimbra, 2011.
    Publicado
  7. Domingos, M.; Fernandes Patrício, Tatiana Marisa; Bártolo, P.J.; Coelho, J.F.; Gloria, A.. "IMPROVED BIOMECHANICAL PROPERTIES OF PCL BASED SCAFFOLDS FOR TISSUE ENGINEERING". Trabalho apresentado em 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, 2011.
Artigo em revista
  1. Fernandes Patrício, Tatiana Marisa. "3D printed Poly(-caprolactone)/Hydroxyapatite scaffolds for Bone Tissue Engineering: A comparative study on composite preparation by melt blending or solvent casting techniques and influence of bioceramic content on scaffold properties". International Journal of Molecular Sciences, Materials Science, Interactions of Cells with Biomaterials for Regenerative Medicine 2.0, ijms-1577642 (2022): https://www.mdpi.com/1422-0067/23/4/2318.
    Acesso aberto • Publicado
  2. Rai, Akhilesh; Ferrão, Rafaela; Palma, Paulo; Patricio, Tatiana; Parreira, Paula; Anes, Elsa; Tonda-Turo, Chiara; et al. "Antimicrobial peptide-based materials: opportunities and challenges". Journal of Materials Chemistry B (2022): http://dx.doi.org/10.1039/d1tb02617h.
    Aceite para publicação • 10.1039/d1tb02617h
  3. Fernandes Patrício, Tatiana Marisa. "Bio-inspired polymeric iron-doped hydroxyapatite microspheres as a tunable carrier of rhBMP-2". Materials Science and Engineering: C , https://doi.org/10.1016/j.msec.2020.111410 119 (2021): https://www.sciencedirect.com/science/article/abs/pii/S0928493120333282.
    Publicado
  4. Tatiana M. Fernandes Patrício; Silvia Panseri; Monica Montesi; Michele Iafisco; Monica Sandri; Anna Tampieri; Simone Sprio. "Superparamagnetic hybrid microspheres affecting osteoblasts behaviour". Materials Science and Engineering: C 96 (2019): 234-247. https://doi.org/10.1016/j.msec.2018.11.014.
    10.1016/j.msec.2018.11.014
  5. Michele Miragoli; Paola Ceriotti; Michele Iafisco; Marco Vacchiano; Nicolò Salvarani; Alessio Alogna; Pierluigi Carullo; et al. "Inhalation of peptide-loaded nanoparticles improves heart failure". Science Translational Medicine 10 424 (2018): eaan6205-eaan6205. https://doi.org/10.1126/scitranslmed.aan6205.
    10.1126/scitranslmed.aan6205
  6. Fernandes Patrício, T.M.; Panseri, S.; Sandri, M.; Tampieri, A.; Sprio, S.. "New bioactive bone-like microspheres with intrinsic magnetic properties obtained by bio-inspired mineralisation process". Materials Science and Engineering C 77 (2017): 613-623. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017021695&partnerID=MN8TOARS.
    10.1016/j.msec.2017.03.258
  7. Di Mauro, V.; Iafisco, M.; Salvarani, N.; Vacchiano, M.; Carullo, P.; Ramírez-Rodríguez, G.B.; Patrício, T.; et al. "Bioinspired negatively charged calcium phosphate nanocarriers for cardiac delivery of MicroRNAs". Nanomedicine 11 8 (2016): 891-906. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962198324&partnerID=MN8TOARS.
    10.2217/nnm.16.26
  8. Sandhöfer, B.; Meckel, M.; Delgado-López, J.M.; Patrício, T.; Tampieri, A.; Rösch, F.; Iafisco, M.. "Synthesis and preliminary in vivo evaluation of well-dispersed biomimetic nanocrystalline apatites labeled with positron emission tomographic imaging agents". ACS Applied Materials and Interfaces 7 19 (2015): 10623-10633. http://www.scopus.com/inward/record.url?eid=2-s2.0-84930224962&partnerID=MN8TOARS.
    10.1021/acsami.5b02624
  9. Patrício, T.; Domingos, M.; Gloria, A.; D'Amora, U.; Coelho, J.F.; Bártolo, P.J.. "Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering". Rapid Prototyping Journal 20 2 (2014): 145-156. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897911326&partnerID=MN8TOARS.
    10.1108/RPJ-04-2012-0037
  10. Patrício, T.; Domingos, M.; Gloria, A.; Bártolo, P.. "Characterisation of PCL and PCL/PLA scaffolds for tissue engineering". Procedia CIRP (2013): 110-114. DOI: 10.1016/j.procir.2013.01.022.
    Publicado • 10.1016/j.procir.2013.01.022
  11. Patrício, T.; Bártolo, P.. "Thermal stability of PCL/PLA blends produced by physical blending process". Procedia Engineering 59 (2013): 292-297. https://doi.org/10.1016/j.proeng.2013.05.124.
    Publicado • 10.1016/j.proeng.2013.05.124
  12. Patrício, T.; Glória, A.; Bártolo, P.. "PCL and PCL/PLA scaffolds for bone tissue regeneration". 683 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84878313500&partnerID=MN8TOARS.
    10.4028/www.scientific.net/AMR.683.168
  13. Patrício, T.; Pereira, R.; Oliveira, L.; Bártolo, P.. "Polyethylene glycol and polyethylene glycol/hydroxyapatite constructs produced through stereo-thermal-lithography". Advanced Materials Research 749 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84884754955&partnerID=MN8TOARS.
    10.4028/www.scientific.net/AMR.749.87
Capítulo de livro
  1. Patrício, Tatiana. "8 - Natural polymers for bone repair". editado por Kendell M. Pawelec; Josep A. Planell, 199-232. Woodhead Publishing, 2019.
    https://doi.org/10.1016/B978-0-08-102451-5.00008-1
  2. Patrício, Tatiana. "3 - Biomineralization process generating hybrid nano- and micro-carriers". editado por Maria Letizia Focarete; Anna Tampieri, 19-42. Woodhead Publishing, 2018.
    https://doi.org/10.1016/B978-0-08-102198-9.00003-X
  3. Patrício, T.F.; Pereira, R.F.; Cerva, A.; Bártolo, P.J.. "Vat polymerization techniques for biotechnology and medicine". In High Value Manufacturing – VRAP 2013, 203-207. CRC Press, (ISBN 9781138001374), 2013.
    Publicado
  4. Videira, A.C.; Patrício, T.; Pereira, R.; Ferreira, J.M.F.; Bártolo, P.. "Effect of TCP20/Bioglass addition on the morphological and mechanical properties of 3D Bioextruded poly (e-caprolactone) scaffolds". In High Value Manufacturing – VRAP 2013, 199-202. CRC Press, (ISBN 9781138001374), 2013.
    Publicado
  5. Patrício, T.; Glória, A.; Bártolo, P.. "Mechanical and biological behaviour of PCL and PCL/PLA scaffolds for tissue engineering applications". 2013.
    10.3303/CET1332275
  6. Bártolo, P.J.; Domingos, M.; Patrício, T.; Cometa, S.; Mironov, V.. "Biofabrication strategies for tissue engineering". In Advances on Modeling in Tissue Engineering. Springer Netherlands, 2011.
    10.1007/978-94-007-1254-6_8
Livro
  1. P.J. Bártolo, A.C. de Lemos, A.P. Tojeira, A. Pereira, A. Mateus, A. Mendes, C. dos Santos, D.M. Freitas, H. Bártolo, H.; Fernandes Patrício, Tatiana Marisa; Ferreira, T.. Innovative Research in Virtual and Physical Prototyping. CRC Press, (ISBN 978-0-415-68418-7), London, 2012. 2012.
    Editor
Poster em conferência
  1. Iafisco, M.; Di Mauro, V.; Salvarani, N.; Ramírez-Rodríguez, G.B.; Fernandes Patrício, Tatiana Marisa; Miragoli, M.; Catalucci, D.; Tampieri, A.. "Bio-inspired negatively-charged calcium phosphate nanocarriers for cardiac delivery of therapeutic molecules". Trabalho apresentado em 10th World Biomaterials Congress, Frontiers in Bioengineering and Biotechnology, 2016.
  2. Fernandes Patrício, Tatiana Marisa; Sprio, S.; Sandri, M.; Gostynska, N.; Montesi, M.; Panseri, S.; Kluijtmans, B.; Tampieri, A.. "Bio-inspired superparamagnetic microspheres for bone tissue engineering applications". Trabalho apresentado em 10th World Biomaterials Congress, Frontiers in Bioengineering and Biotechnology, 2016.
  3. Fernandes Patrício, Tatiana Marisa; Sprio, S.; Sandri, M.; Panseri, S.; Tampieri, A.. "Hybrid Superparamagnetic Collagen-like Peptide - Microparticles applied on Bone Tissue Regeneration". Trabalho apresentado em 4th TERMIS World Congress, Tissue engineering: Part A, V. 21, Supplement 1-152, 2015.
Resumo em conferência
  1. "Customised superparamagnetic bone-like substitutes". Trabalho apresentado em International Conference on Direct Digital Manufacturing and Polymers | 2021, 2021.
  2. Fernandes Patrício, Tatiana Marisa; Montesi, M.; Panseri, S.; Alves, N.; Sprio, S.. "Smart magnetically active hybrid microspheres for delivery of therapeutic agents for bone defects". Trabalho apresentado em World Biomaterials Congress WBC 2020 11-15 December 2020, 2020.
  3. Fernandes Patrício, Tatiana Marisa. "Bio-inspired superparamagnetic microspheres for bone tissue engineering applications. Frontiers in Bioengineering and Biotechnology, (2734).". Trabalho apresentado em 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016, 2016.
    Publicado
  4. Fernandes Patrício, Tatiana Marisa. "Bio-inspired negatively-charged calcium phosphate nanocarriers for cardiac delivery of therapeutic molecules. Front. Bioeng. Biotechnol". Trabalho apresentado em 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016, 2016.
    Publicado
  5. Fernandes Patrício, Tatiana Marisa. "Hybrid Superparamagnetic Collagen-like Peptide - Microparticles applied on Bone Tissue Regeneration". Trabalho apresentado em 4th TERMIS World Congress, Tissue engineering: Part A, 2015.
    Publicado
  6. Fernandes Patrício, Tatiana Marisa; Dias J., Sousa I., Sousa J.. "Automatização do Sistema Multifuncional para a Reabilitação Humana – Rehabstairs". Trabalho apresentado em 1as Jornadas do Curso de Mestrado em Concepção e Desenvolvimento de Produto, 2009.
  7. Fernandes Patrício, Tatiana Marisa; Ferreira, F., Bártolo, P., Almeida, H.. "Efeito das condições de processamento sobe a cristalinidade e anisotropia em biomateriais poliméricos". Trabalho apresentado em 1as Jornadas do Curso de Mestrado em Concepção e Desenvolvimento de Produto, 19 Dezembro, 2009.
  8. Fernandes Patrício, Tatiana Marisa; Ferreira F.; Bártolo, P.J.; Almeida H.. "Avaliação da cristalinidade e anisotropia em biomateriais poliméricos para bioextrusão". Trabalho apresentado em Conferência de Engenharia 2009 (inovação e desenvolvimento), Covilhã, 2009.
    Publicado
Tese / Dissertação
  1. Fernandes Patrício, Tatiana Marisa. "NOVEL, BIO-INSPIRED SUPERPARAMAGNETIC HYBRID MICROSPHERES FOR BONE TISSUE ENGINEERING". Doutoramento, ALMA MATER STUDIORUM UNIVERSITÀ DI BOLOGNA, 2017.
  2. Fernandes Patrício, Tatiana Marisa. "Fabrication and characterization of 3D structures of PCL and PCL/PLA for applications in Tissue Engineering". Mestrado, Instituto Politécnico de Leiria, 2011.
  3. Fernandes Patrício, Tatiana Marisa. "Hydrogels: Characterisation and Drug Delivery system". Licenciatura, Instituto Politécnico de Leiria, 2008.

Propriedade Intelectual

Patente
  1. Fernandes Patrício, Tatiana Marisa. 2021. "European patent: EP21188159.4 (INTELLIGENT BIOMIMETIC BIODEVICE AND USE THEREOF) (28/07/2021).".
    Pendente
  2. Fernandes Patrício, Tatiana Marisa. 2021. "National patent: PT 117287 (BIODISPOSITIVO BIOMIMÉTICO INTELIGENTE E SEU USO) (14/06/2021)".
  3. Fernandes Patrício, Tatiana Marisa; P.J. Bártolo, L. Oliveira, A. Mateus, E. Pinto, H.A. Almeida, N. Martins-Ferreira, N. Alves, R. Pereira. 2016. "Sistema de estéreo termo litografia multimaterial e respectivo processo". Portugal.
    Concedida/Emitida
  4. Fernandes Patrício, Tatiana Marisa; I. Sousa, J. de Sousa, J. Dias, T. Patrício, P.J. Bártolo, N.M. Alves, C. Capela, A. Mendes, H.A. Almeida. 2012. "Sistema Multifuncional para Reabilitação Humana". Portugal.
    Concedida/Emitida
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2021/05/21 Customised superparamagnetic bone-like substitutes International Conference on Direct Digital Manufacturing and Polymers | 2021
Centre for Rapid and Sustainable Product Development, Polytechnic Leiria
2018/10/02 Bio-inspired superparamagnetic hybrid microspheres for bone tissue engineering
Center for Neuroscience and cell biology of the University of Coimbra (Coimbra, Portugal)
2017 Novel, Bio-inspired superparamagnetic hybrid microspheres for bone tissue engineering European Chapter Meeting of the Tissue Engineering and Regenerative Medicine International Society 2017 26 - 30 June, 2017, Davos, Switzerland
Bioinspire Meeting (Davos, Suiça)
2016/12/16 New magnetic microspheres obtained by bio-inspired synthesis, for controlled release of BMP-2 in bone tissue engineering Materials.it
National Research Council, Italy (Catania, Itália)
2016/11/17 ESR3: Development of new superparamagnetic bone scaffolds BIOINSPIRE 36-months Meeting
(Gosselies, Bélgica)
2016/04/14 ESR3: Development of new superparamagnetic bone scaffolds BIOINSPIRE 30-months Meeting, Bologna, 13/14/15 April 2016
Rizzoli Hospital (Bologna, Itália)
2016/01/06 Biomimetic superparamagnetic materials for bone tissue regeneration
Centre for Rapid and Sustainable Product Development of IPLeiria (Marinha Grande, Portugal)
2015/11/04 ESR3: Development of new superparamagnetic bone scaffolds BIOINSPIRE 24-months meeting, EMC, Rotterdam, The Netherlands, 4/5 November 2015
Erasmus Medical Center (Rotterdam, Países Baixos)
2015/04/16 ESR3: Development of new superparamagnetic bone scaffolds BIOINSPIRE 18-months Meeting, HEIDELBERG, GERMANY, 15-17 APRIL 2015
(HEIDELBERG, Alemanha)
2014/10/23 ESR3: Development of new superparamagnetic bone scaffolds BIOINSPIRE 12-months Meeting, Faenza, Italy, 23/24 October 2014
ISTEC-CNR (Faenza, Itália)
2014/04/07 ESR3: Development of new superparamagnetic bone scaffolds BIOINSPIRE 06-months Meeting, WURZBURG, GERMANY, 7/8 APRIL 2014
Fraunhofer Institute Würzburg (Würzburg, Alemanha)
2013/03/05 Characterisation of PCL and PCL/PLA scaffolds for tissue engineering First CIRP Conference on BioManufacturing 2013 : Tokyo, Japan, 4 - 6 March 2013
(Tokyo, Japão)
2013 Vat polymerization techniquesfor biotechnology and medicine In High Value Manufacturing – VRAP 2013
2013 Mechanical and biological behaviour of PCLand PCL/PLA scaffolds for tissue engineering applications Chemical Engineering Transactions (CET), Milan
2012/10/16 Morphological and Mechanical behaviour of PCL/PLA scaffolds: the effect of the blend preparation method 5th International Conference on Polymer Behavior (ICPB5), Multiphysics Approaches for the behavior of polymer and polymer-based nanomaterials
Aveiro University (Aveiro, Portugal)
2012/09/20 Physical blending for produce scaffolds for tissue engineering applications International Conference on Additive Technologies – ICAT 2012
(Maribor, Eslovénia)
2012/05/03 Biocell printing: scaffold characterisation for cell growth 1st International Conference on Design and Processes for Medical Devices
(Brescia, Itália)
2011/09/29 Improved biomechanical properties of PCL based scaffolds for tissue engineering International Conference – Advanced Research in Virtual and Rapid Prototyping (VR@P)
Polytechnic Institute of Leiria (Leiria, Portugal)
2011/06/22 PCL and PCL/PLA scaffolds for tissue engineering applications European Forum on Rapid Prototyping – Rapid Prototyping & Manufacturing
École Centrale Paris – Châtenay-Malabry (Paris, França)
2011/06/03 Morphological and physical characterisation of PCL and PCL/PLA scaffolds for tissue engineering ECCOMAS – International conference on Tissue Engineering
(Lisbon, Portugal)
2011/02/04 PCL/PLA scaffolds to bone tissue regeneration 4º National Congress of Biomechanics
(Coimbra, Portugal)
2009/11/28 Avaliação da cristalinidade e anisotropia em biomateriais poliméricos para bioextrusão Conferência de Engenharia 2009 (inovação e desenvolvimento)
(Covilhã, Portugal)
2009 Efeito das condições de processamento sobe a cristalinidade e anisotropia embiomateriais poliméricos 1as Jornadas do Curso deMestrado em Concepção e Desenvolvimento de Produto
2009 Automatização doSistema Multifuncional para a Reabilitação Humana – Rehabstairs 1as Jornadas do Curso de Mestrado em Concepção e Desenvolvimento de Produto
Polytechnic Leiria

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2021/12/01 - Atual Master Thesis under the project BioRobotBeads, (ERDF/Portugal 2020/COMPETE, No. 47081).
Orientador
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2021/10/01 - 2021/12/31 Not graduated course from School of Tourism and Maritime Technology, in the area of Novel therapies for regeneration of osteochondral deffects and bone tissues. The project was supported by “UIDB/04044/2020”, BI2, financiado pela Fundação para a Ciência e a Tecnologia, I.P, FCT/MCTES através de fundos nacionais (PIDDAC).
Orientador
Not graduated course (Iniciação científica)
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2012 - 2014 Master thesis in “Fabrication of three-dimensional structures with Polycaprolactone and Polycaprolactone/bioglass for tissue engineering applications”
Coorientador
Universidade de Aveiro, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2018/06/01 - 2018/10/01 Public demonstration: BePIM III: Microdispositivos médicos com capacidades osteointegradoras por microPIM, https://www.3dtech.pt/bepim/ (2018/10/01 - 2018/10/01)
Seminário (Membro da Comissão Organizadora)
Vangest, ATT - Advanced Tool Technology, Portugal
2012/01/01 - 2014/02/14 Seminars CDRSP 2012 - http://cdrsp.ipleiria.pt/cdrspseminarios/oradores-convidados/, Marinha Grande, Portugal (2012/01/01)
Seminário (Presidente da Comissão Organizadora)
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal

Participação em evento

Descrição da atividade
Tipo de evento
Nome do evento
Instituição / Organização
2021/02/18 - 2021/02/18 3D tissue models for preclinical in vitro assays
Seminário
3D tissue models for preclinical in vitro assays
React4life, Itália
2021/02/09 - 2021/02/09 Cell Culture Under Flow: Setup and Applications
Seminário
Cell Culture Under Flow: Setup and Applications
IBIDI, Alemanha
2021/02/02 - 2021/02/03 Towards replacement of animals for scientific purpose
Conferência
Towards replacement of animals for scientific purpose
European Commission, Bélgica
2021/01/27 - 2021/01/27 Scientific writing and publishing: practical tips from an editor for you article to succeed
Seminário
Universidade da Beira Interior Centro de Investigação em Ciências da Saúde, Portugal
2020/12/11 - 2020/12/15 11th World Biomaterials Congress, 2020
Conferência
https://wbc2020.org/
2019/12/11 - 2019/12/11 I4.0 Impacts and case studies
Seminário
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2019/11/13 - 2019/11/13 Research Ethics for Integrity of Science
Seminário
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2019/09/25 - 2019/09/27 1st Discoveries Forum on Regenerative and Precision Medicine Porto, PT
Simpósio
Universidade do Minho, Portugal
2019/08/06 - 2019/08/06 Electric fields in the human central nervous system: computational models of new non-invasive techniques
Seminário
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2015/06/29 - 2015/07/03 Summer School The nano / medicine interface
Outro
Summer school, http://www.summerschool2015.ineb.up.pt/
Universidade do Porto Instituto de Investigação e Inovação em Saúde, Portugal
2014/12/02 - 2014/12/02 Novel technologies and applications of In situ nanoindentation on SEM, TEM, FIB-SEM for the mechanical Characterisation of materials in the nanoscale
Seminário
Consiglio Nazionale delle Ricerche Area della Ricerca di Bologna, Itália
2014/11/18 - 2014/11/18 Extract calcium phosphate of marine sources
Seminário
Institute of Science and Technology for Ceramics - National Research Council, Itália
2014/10/28 - 2014/10/28 Nanoparticles for magnetic hyperthermia: characterisation and applications in nanomedicine and new materials
Seminário
Istituto dei Materiali per l'Elettronica ed il Magnetismo Consiglio Nazionale delle Ricerche, Itália
2014/10/16 - 2014/10/17 Symposium “New Frontiers in Regenerative Medicine”
Simpósio
Radboud Universiteit Radboud Institute for Molecular Life Sciences, Países Baixos
2014/10/02 - 2014/10/02 How to exploit the porosity of geopolymers?
Seminário
Institute of Science and Technology for Ceramics - National Research Council, Itália
2014/09/24 - 2014/09/24 Federchimica – La formazione post lauream e il mondo del lavoro. Nell’industria chimica, chi fa ricerca.fa carriera?
Seminário
Università degli Studi di Bologna, Itália
2014/09/17 - 2014/09/17 Role of IP3 receptor signalling in cell functions and diseases
Seminário
Rizzoli Orthopaedic Institute, Itália
2014/06/06 - 2014/06/07 Writing scientific publications
Oficina (workshop)
PhD program
Julius-Maximilians-Universität Würzburg Universitätsbibliothek, Alemanha

Júri de grau académico

Tema
Tipo de participação
Nome do candidato (Tipo de grau)
Instituição / Organização
2020/02/13 Incorporating Undaria pinnatifida bioactive extracts in electrospun wound dressings
Arguente
Carolina Alexandra Marzia Ferreira (Mestrado)
Instituto Politécnico de Leiria Escola Superior de Turismo e Tecnologia do Mar de Peniche, Portugal

Arbitragem científica em conferência

Nome da conferência Local da conferência
2021 - Atual Organizing Committee Conference of "Materiais 2022", https://congressomateriais.pt/ Centre for Rapid and Sustainable Product Development, Polytechnic Leiria
2013/01/01 - 2013/12/31 International Conference on Tissue Engineering Centre for Rapid and Sustainable Product Development, Polytechnic Leiria
2013/06/01 - 2013/06/30 11th International Conference on Chemical & Process Engineering, Milano, Italy The Italian Association of Chemical Engineering
2011/01/01 - 2011 5th International Conference on Advanced Research in Virtual and Rapid Prototyping (VR@P2011) Centre for Rapid and Sustainable Product Development, Polytechnic Leiria
2010/01/01 - 2010 Advanced Course on Regenerative Medicine - Cells, Biomaterials and Strategies for Bone and Cartilage Regeneration Centre for Rapid and Sustainable Product Development, Polytechnic Leiria

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2022/01 - Atual Review Editor in Biomaterials Manufacturing and Technology Frontiers
2021/10 - Atual Guest editor: Polymers, Special issue "Biobased Polymers: Design, Synthesis and Applications", MDPI MDPI
2021/10 - Atual Guest associator editor: Frontiers in Bioengineering and Biotechnology Frontiers
2021/10 - Atual Biomaterials Science Royal Society of Chemistry
2021/07 - Atual Regenerative Biomaterials Oxford Academy
2020/04/17 - Atual Biology — Open Access Journal (2079-7737) MDPI
2019/11 - Atual Progress in Natural Science: Materials International Elsevier
2019/01/01 - Atual Journal of Biomedical Materials Research: Part A (1552-4965) Wiley Periodicals, Inc.
2019/01/01 - Atual Theranostics (1838-7640) Ivyspring International Publisher
2019/01/01 - Atual Journal of Materials Chemistry B (2050-7518) The Royal Society of Chemistry

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2018/01/01 - 2018/01/15 Website development for the project ARTTE, nº 37457: https://attartte.wordpress.com/ Vangest, ATT - Advanced Tool Technology, Portugal
2013/01/01 - 2014/02/14 Development of website of the project, Materializa! da Ideia ao Real, Ciência Viva Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2012/01/01 - 2014/02/14 Development of website, Seminars CDRSP 2012 - http://cdrsp.ipleiria.pt/cdrspseminarios/oradores-convidados/ (2012) Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal

Membro de associação

Nome da associação Tipo de participação
2022/03 - Atual Submitted a proposal to be part of the Stakeholders Group - National Cancer Hub Stakeholders Group

Membro de comissão

Descrição da atividade
Tipo de participação
Instituição / Organização
2018/02/28 - Atual Scientific board of the Centre for Rapid and Sustainable Product Development, CDRSP-Polytechnic Leiria
Membro
Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal

Outro júri / avaliação

Descrição da atividade Instituição / Organização
2021/09 - 2021/11 Jury of evaluation of Master Research Fellow for the project, “BioRobotBeads - Sistema robotizado para a produção de biomateriais e partículas, (POCI-01-0247-FEDER047081)”, cofinanciado pelo FEDER – Fundo Europeu de Desenvolvimento Regional, no âmbito do Programa Portugal 2020, através do COMPETE 2020 – Programa Operacional Competitividade e Internacionalização. Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal
2021/07 - 2021/09 Jury of evaluation of Research fellow for the project, MATIS- Materiais e Tecnologias Industriais Sustentáveis (CENTRO-01-0145-FEDER-000014). Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal

Revisão ad hoc de artigos em revista

Nome da revista (ISSN) Editora
2022 - Atual Materials Science and Engineering C Elsevier
2022 - Atual Frontiers Molecular Biosciences Frontiers

Tutoria

Tópico Nome do aluno
2021/12 - Atual Development of system for biomaterials synthesis Francisco Diz
2021/05/24 - 2021/07/02 Biomimetic and magnetic scaffold with multiple ions release for bone regeneration Miguel Forte Caetano
2021/05/11 - 2021/06/23 Biomimetic and magnetic gradient scaffold with multiple ions release for osteochondral defects João Tomás da Silva e Fonseca
2020 - 2021 Hybrid bone substitutes Cristiana Fernandes
2019 - 2019 Financial issues of IDI projects Inês Pires, trainee of projects management
2016 - 2016 Production and characterisation of calcium phosphate nanoparticles Lorenzo Degli Esposti, PhD student
2014 - 2015 Synthesis and characterisation of calcium phosphate nanoparticles Simone Pezzi, degree student
2013 - 2013 Thermal and chemical characterisation of polymers Alejandra - IAESTE student
2013 - 2013 Morphological and chemical characterisation of polymers Laura - IAESTE student
2012 - 2012 Thermal and chemical characterisation of polymers Henna - IAESTE student
2011/01/01 - 2011/12/31 Fabrication of composite materials films; injection of polycaprolactone and polycaprolactone / hydroxyapatite to produce screws to biomedical applications and thermal characterisation of the samples Carina Carreira, master student, IPLeiria
2011/01/01 - 2011/12/31 Fabrication of composite materials films; fabrication of polycaprolactone/ hydroxyapatite scaffolds, with different percentages in fused deposition modeling equipment, named as Bioextruder; and thermal characterization of the scaffolds Cátia Sousa, master student, IPLeiria
2011/01/01 - 2011/12/31 Fabrication of 3D polycaprolactone structures through fused deposition modeling equipment, named as Dual-bioextruder; and mechanical characterisation Pedro Gonçalves, master student - ISEC Coimbra
2011 - 2011 Fabrication of polycaprolactone scaffolds with fused deposition modeling equipment, called Bioextruder Celine, IAESTE student
Distinções

Prémio

2014 Marie Curie Research Fellow
European Commission Seventh Framework Programme for Research and Technological Development, Bélgica

Título

2017 Doctor Europaeus
ALMA MATER STUDIORUM UNIVERSITÀ DI BOLOGNA, Itália