???global.info.a_carregar???
João Miguel Serras Dias holds a PhD in Mechanical Engineering (2022) and a Master’s degree in Engineering Physics (2016), both from the University of Aveiro. His expertise spans Applied Energy, Thermodynamics, Fluid Mechanics, and Heat and Mass Transfer, with a strong focus on adsorption technologies and heat pump systems. He began his professional career in 2016 as an R&D Engineer at Indisol S.A., where he was responsible for the development and testing of medium and high voltage sensors. In 2017, he joined the Centre for Mechanical Technology and Automation (TEMA) as a Research Fellow, later becoming a full member in 2023. In 2019, he was awarded a PhD scholarship by the Portuguese Foundation for Science and Technology (FCT), dedicating his doctoral research to adsorption heat pumps for space and water heating. During his career, João Miguel Serras Dias has been actively engaged in both research and teaching. He has participated in the research projects Smart Green Homes, Illiance Agenda, and SensorGrid, where he contributed to the development of innovative technologies with contributions for industry and society. His research has led to multiple scientific publications in international journals and presentations at scientific conferences. In addition to his research activities, he has served as an Invited Professor at the Department of Mechanical Engineering at the University of Aveiro, where he lectured Fluid Mechanics, Computational Fluid Mechanics, and Technical Drawing. From 2017 to 2019, he also assisted in teaching Thermal Engineering and Thermal Systems Project. His primary research interests include Applied Energy, Engineering Thermodynamics, Energy Systems, Renewable & Sustainable Energy, Heat and Mass Transfer, Heat Pumps, and Refrigeration, with a particular focus on developing sustainable and efficient thermal energy solutions.
Identificação

Identificação pessoal

Nome completo
João Miguel Serras Dias
Género
Masculino

Nomes de citação

  • Dias, João M.S.

Identificadores de autor

Ciência ID
E719-2555-339C
ORCID iD
0000-0002-7071-2439
Researcher Id
C-5469-2019
Scopus Author Id
57203974871

Endereços de correio eletrónico

  • joaomdias@ua.pt (Profissional)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Termodinâmica
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Aeroespacial
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Mecânica Aplicada

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Espanhol; Castelhano Utilizador independente (B1) Utilizador independente (B2) Utilizador independente (B1) Utilizador independente (B2) Utilizador independente (B1)
Formação
Grau Classificação
2022
Concluído
Doctoral Program in Mechanical Engineering (Doutoramento)
Universidade de Aveiro, Portugal
"Adsorption heat pumps for space and domestic water heating" (TESE/DISSERTAÇÃO)
2016/07
Concluído
Physics Engineering (Mestrado integrado)
Universidade de Aveiro, Portugal
"Monitorização remota com sensores de fibra ótica" (TESE/DISSERTAÇÃO)
2006
Concluído
Cambridge English First (Outros)
Cambridge English Language Assessment Spain and Portugal, Espanha
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento
Empregador
2023/08 - Atual Investigador (Investigação) Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2019/11 - 2022/12 Investigador (Investigação) Fundação para a Ciência e a Tecnologia, Portugal
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2017/08 - 2019/10 Investigador (Investigação) Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
Universidade de Aveiro, Portugal

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2023/01 - 2023/08 Professor Auxiliar Convidado (Docente Universitário) Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
Universidade de Aveiro, Portugal
2020/02 - 2020/08 Assistente Convidado (Docente Universitário) Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
Universidade de Aveiro, Portugal

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
2016/07/18 - 2017/07/31 R&D Engineer Indisol, S.A., Portugal
Projetos

Projeto

Designação Financiadores
2023 - Atual Agenda ILLIANCE
Investigador
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
European Union
Em curso
2017/08/08 - 2020/09 SGH - Smart Green Homes
Bolseiro de Doutoramento
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal

Bosch Termotecnologia, S.A., Portugal
European Regional Development Fund
Concluído
2019/01/01 - 2019/12/31 Centro de Tecnologia Mecânica e Automação
UID/EMS/00481/2019
Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2016/07/18 - 2017/07/31 SENSORGRID
POCI-01-0247-FEDER-009547
Desenvolvimento técnico
Indisol, S.A., Portugal

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
European Regional Development Fund
Concluído
Produções

Publicações

Artigo em conferência
  1. João M.S., Dias; Vítor A.F., Costa. "Adsorption cooler design, modeling, and dynamics and performance analyses". Trabalho apresentado em CYTEF 2022 - XI Congreso Ibérico | IX Congreso Iberoamericano de Ciencias y Técnicas del Frío, Cartagena, 2022.
    10.31428/10317/11528
  2. Dias, João M.S.; Costa, Vítor A.F.. "A 2D TRANSIENT PHYSICAL MODEL OF A COATED TUBE ADSORBER FOR ADSORPTION HEAT PUMPS". Trabalho apresentado em CMN 2019 - Congress on Numerical Methods in Engineering, Guimarães, 2019.
    Publicado
Artigo em revista
  1. Eyuel A. Lemma; João M.S. Dias; António A. Bastos; Bernardo Mascate; Ana Horovistiz. "Advances in induction brazing of copper and dissimilar metals: Challenges and emerging trends". Journal of Advanced Joining Processes (2025): https://doi.org/10.1016/j.jajp.2025.100302.
    10.1016/j.jajp.2025.100302
  2. António B. Pereira; João M. S. Dias; José P. Rios; Nélia M. Silva; Sathishkumar Duraisamy; Ana Horovistiz. "Brazing of Copper Pipes for Heat Pump and Refrigeration Applications". Metals (2024): https://doi.org/10.3390/met14020171.
    10.3390/met14020171
  3. Vítor A.F. Costa; João M.S. Dias. "On the best coefficient of performance and specific heating or cooling power combination for adsorption refrigerators and heat pumps". International Journal of Refrigeration (2023): https://doi.org/10.1016/j.ijrefrig.2023.04.009.
    10.1016/j.ijrefrig.2023.04.009
  4. João M. S. Dias; Vítor A. F. Costa. "Adsorption Cooler Design, Dynamic Modeling, and Performance Analyses". Clean Technologies (2022): https://doi.org/10.3390/cleantechnol4040070.
    Publicado • 10.3390/cleantechnol4040070
  5. João M.S. Dias; Vítor A.F. Costa. "Modelling and analysis of a complete adsorption heat pump system". Applied Thermal Engineering (2022): https://doi.org/10.1016/j.applthermaleng.2022.118782.
    10.1016/j.applthermaleng.2022.118782
  6. João M. S. Dias; Vítor A. F. Costa. "Modeling and Analysis of a Coated Tube Adsorber for Adsorption Heat Pumps". Energies (2021): https://doi.org/10.3390/en14216878.
    10.3390/en14216878
  7. João M.S. Dias; Vítor A.F. Costa. "Evaluating the performance of a coated tube adsorber for adsorption cooling". International Journal of Refrigeration 118 (2020): 21-30. https://doi.org/10.1016/j.ijrefrig.2020.06.023.
    10.1016/j.ijrefrig.2020.06.023
  8. Dias, João M.S.; Costa, Vítor A.F.. "Which dimensional model for the analysis of a coated tube adsorber for adsorption heat pumps?". Energy (2019): https://doi.org/10.1016/j.energy.2019.03.028.
    10.1016/j.energy.2019.03.028
  9. Dias, J.M.S.; Costa, V.A.F.. "Adsorption heat pumps for heating applications: A review of current state, literature gaps and development challenges". Renewable and Sustainable Energy Reviews 98 (2018): 317-327. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053844378&partnerID=MN8TOARS.
    10.1016/j.rser.2018.09.026
  10. Antunes, P.; Dias, J.; Paixão, T.; Mesquita, E.; Varum, H.; André, P.. "Liquid level gauge based in plastic optical fiber". Measurement: Journal of the International Measurement Confederation 66 (2015): 238-243. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924054150&partnerID=MN8TOARS.
    10.1016/j.measurement.2015.01.030
  11. Antunes, P.C.; Dias, J.M.; Varum, H.; André, P.. "Dynamic structural health monitoring of a civil engineering structure with a POF accelerometer". Sensor Review 34 1 (2014): 36-41. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892401308&partnerID=MN8TOARS.
    10.1108/SR-04-2013-656
  12. Antunes, Paulo; Dias, João; Varum, Humberto; André, P. S.. "A Plastic Optical Fiber Accelerometer Suitable for Marine Applications". Marine Engineering Frontiers 1 4 (2013): 69-74. https://www.academia.edu/27933106/A_Plastic_Optical_Fiber_Accelerometer_Suitable_for_Marine_Applications.
    Publicado
Artigo em revista (magazine)
  1. Dias, João M.S.; Costa, Vítor A.F.. "Modelling and analysis of a complete adsorption heat pump system", Research@ua, 2022, https://proa.ua.pt/index.php/researchua/issue/view/1159/397.
Poster em conferência
  1. Lemma, eyuel; Dias, João M.S.; Pereira, Antonio; Horovistiz, Ana. "Induction brazing of copper pipes for the manufacturing of heat pumps". Trabalho apresentado em Ciência 2024, 2024.
  2. Duraisamy, Sathishkumar; Horovistiz, Ana; Pereira, Antonio; Dias, João M.S.. "Electron beam welding for heat pump manufacturing". Trabalho apresentado em Ciências 2024, 2024.
  3. Dias, João M.S.; Costa, Vítor A.F.. "A 2D transient physical model of a coated tube adsorber for adsorption heat pumps". Trabalho apresentado em Congress on Numerical Methods in Engineering, 2019.
  4. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption Heat Pumps for Central and Domestic Water Heating". Trabalho apresentado em Ciência 2018 - Encontro de Ciência e Tecnologia em Portugal, 2018.
Resumo em conferência
  1. Torres, Diogo; Rafael, Sandra; Quintã, André; Dias, João M.S.. "Development of a real-time monitoring system for gas emissions from industrial chimneys". Trabalho apresentado em TEchMA 2024 – 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Publicado
  2. Silva, Alexandra; Costa, Vitor; Dias, João M.S.; Calisto, Hugo; Henriques, Mafalda. "Heat pumps evaporators frosting and defrosting numerical models implementation and adjustment". Trabalho apresentado em TEchMA 2024 – 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Publicado
  3. Sousa, Nuno; Costa, Vítor; Dias, João M.S.; Calisto, Hugo; Henriques, Mafalda. "Development of a software application for heat pumps heat exchangers performance evaluation and analysis". Trabalho apresentado em TEchMA 2024 – 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Publicado • https://doi.org/10.48528/mehv-z227
  4. Lemma, eyuel; Dias, João M.S.; Pereira, Antonio; Fonseca, Pedro; Horovistiz, Ana. "Induction brazing of copper pipes for the manufacturing of heat pumps". Trabalho apresentado em TEchMA 2024 - 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Publicado
  5. Duraisamy, Sathishkumar; Horovistiz, Ana; Pereira, Antonio; Ferreira, Nelson; Dias, João M.S.. "Electron Beam Welding for Heat Pump Manufacturing". Trabalho apresentado em TEchMA 2024 - 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Publicado
  6. Dias, João M.S.; Pereira, Antonio; Horovistiz, Ana; Silva, Nélia; Duraisamy, Sathishkumar; Lemma, eyuel; Batista, Joana; Mascate, Bernardo; Costa, Diogo. "Advancements in Welding Techniques for Copper Pipes in Heat Pump Systems: A Comparative Analysis". Trabalho apresentado em 77th IIW – Annual Assembly and International Conference on Welding and Joining 2024, 2024.
    Publicado
  7. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption technologies for heating or/and cooling". Trabalho apresentado em TEchMA 2022– 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2022.
    10.48528/2smr-sn15
  8. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption heat pumps for space and domestic water heating". Trabalho apresentado em Research Summit 2022, 2022.
    10.48528/6dz9-d129
  9. Dias, João M.S.; Costa, Vítor A.F.. "Development of an adsorption heat pump prototype for domestic water heating". Trabalho apresentado em TEchMA 2021– 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2021.
    10.34624/7q83-ay77
  10. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption heat pumps: Towards modeling and simulation of the complete system". Trabalho apresentado em TEchMA 2020– 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2020.
  11. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption heat pumps for space and water heating". Trabalho apresentado em Research Summit 2020, 2020.
  12. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption heat pumps for space and water heating: from component to complete system". Trabalho apresentado em 2nd International Conference of TEMA: Mobilizing Projects, 2019.
  13. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption Heat Pumps for Domestic Water Heating and Central Heating". Trabalho apresentado em O TEMA em questão: Investigação, Aveiro, 2018.
    Publicado
  14. Dias, João M.S.; Costa, Vítor A.F.. "Adsorption Heat Pumps for Domestic Water Heating and Central Heating". Trabalho apresentado em O TEMA em questão: Investigação, 2018.
Tese / Dissertação
  1. "Adsorption heat pumps for space and domestic water heating". Doutoramento, Universidade de Aveiro, 2022. http://hdl.handle.net/10773/35634.
  2. Dias, João Miguel Serras. "Monitorização remota com sensores de fibra ótica". Mestrado, 2016. http://hdl.handle.net/10773/17319.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2022 Adsorption cooler design, modeling, and dynamics and performance analyses CYTEF 2022 - XI Congreso Ibérico | IX Congreso Iberoamericano de Ciencias y Técnicas del Frío
Universidad Politécnica de Cartagena (Cartagena, Espanha)
2022 Adsorption technologies for heating or/and cooling TEchMA 2022 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
Universidade de Aveiro (Aveiro, Portugal)
2022 Adsorption heat pumps for space and domestic water heating (5' pitch) Research Summit 2022
Universidade de Aveiro (Aveiro, Portugal)
2021 Development of an adsorption heat pump prototype for domestic water heating TEchMA 2021 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
Universidade de Aveiro (Aveiro, Portugal)
2020 Adsorption heat pumps for space and water heating (5' pitch) Research Summit 2020
Universidade de Aveiro (Aveiro, Portugal)
2019/07/04 Adsorption heat pumps for space and water heating (5' pitch) Research Summit 2019
University of Aveiro (Aveiro, Portugal)
2019/07/02 A 2D TRANSIENT PHYSICAL MODEL OF A COATED TUBE ADSORBER FOR ADSORPTION HEAT PUMPS Congress on Numerical Methods in Engineering
University of Minho (Guimarães, Portugal)
2019 Adsorption heat pumps for space and water heating: from component to complete system 2nd International Conference of TEMA: Mobilizing Projects
Universidade de Aveiro (Aveiro, Portugal)
2019 Adsorption heat pumps for space and water heating Third International Workshop on Advances in Engineering of Heating, Ventilating, Air Conditioning and Refrigeration
Universidade de Coimbra (Coimbra, Portugal)
2018/11/29 Adsorption heat pumps for central and domestic water heating (5' pitch) Research Summit 2018
Universidade de Aveiro (Aveiro, Portugal)
2018/06/11 Adsorption Heat Pumps for Domestic Water Heating and Central Heating O TEMA em questão: Investigação
Universidade de Aveiro (Aveiro, Portugal)

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2024 - Atual Electron beam welding of copper and stainless-steel pipes for the manufacturing of heat pumps
Orientador
Engenharia Mecânica (Doutoramento)
Universidade de Aveiro, Portugal
2024 - Atual Optimization of induction brazing parameters for joining copper pipes and similar metals in heat pump manufactures
Coorientador
Engenharia Mecânica (Doutoramento)
Universidade de Aveiro, Portugal
2024 - Atual Modelação por CFD de um Condensador de Microcanais para Aplicação em Bombas de Calor
Orientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2024 - Atual Sistemas de acumulação de energia na forma de ar comprimido
Coorientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2024 - Atual Brasagem por indução de tubos de cobre para o fabrico de bombas de calor
Coorientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2024 - Atual Optimization of Cooling Channel Geometry for Enhanced Regenerative Cooling in Liquid Propellant Rocket Engines
Orientador
Engenharia Mecânica (Doutoramento)
Universidade de Aveiro, Portugal
2023 - Atual Modelação por CFD do sistema de ventilação do evaporador de bombas de calor para aquecimento de águas domésticas
Orientador
Engenharia Computacional (Mestrado)
Universidade de Aveiro, Portugal
2023 - Atual Desenvolvimento de uma câmara climática passiva controlada remotamente
Orientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2023 - 2024 Development and Automation of the Interface Process Between Gaseous Effluent Measurement Equipment and Data Reporting
Orientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2023 - 2024 Development of Liquid Propellant Rocket Engine
Coorientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2023 - 2024 Development of a software application for calculation and analysis of the performance of heat exchangers in heat pumps
Orientador
Universidade de Aveiro, Portugal
2023 - 2024 Ajuste e implementação de modelos numéricos para previsão de congelamento e descongelamento em evaporadores de bombas de calor
Coorientador
Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal

Participação em evento

Descrição da atividade
Tipo de evento
Nome do evento
Instituição / Organização
2024/04/08 - 2024/04/10 Online course - Simulink Fundamentals
Oficina (workshop)
Simulink Fundamentals
Mathworks Inc, Estados Unidos
2020/12/09 - 2020/12/10 Advancing the Blue Economy through Intercontinental Collaboration
Seminário
WavEC Offshore Renewables, Portugal
2019 - 2019 Introduction to Computational Fluid Dynamics
Oficina (workshop)
Universidade de Aveiro, Portugal
2018/10/11 - 2018/10/13 Scientific monitor
Exposição
TECHDAYS 2018
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2018/08/08 - 2018/08/20 Scientific Monitor
Exposição
Academia de Verão UA 2018
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2015/11/23 - 2015/11/27 Scientific monitor
Exposição
2015 Open Week of Science and Technology
Universidade de Aveiro Departamento de Física, Portugal

Júri de grau académico

Tema
Tipo de participação
Nome do candidato (Tipo de grau)
Instituição / Organização
2024/12/20 Implementação e Ajuste de Modelos Numéricos de Congelamento e Descongelamento em Evaporadores de Bombas de Calor
Orientador
Alexandra Sofia Gabriel Vieira da Silva (Mestrado)
Universidade de Aveiro, Portugal
2024/12/20 Utilização de elementos de aquecimento Thick Film em sistemas elétricos de aquecimento de água instantâneo
Presidente do júri
António Rafael Mendes Oliveira (Mestrado)
Universidade de Aveiro, Portugal
2024/12/18 Development and Automation of the interface process between gaseous effluent measurement equipment and data reporting
Orientador
Diogo Alexandre Neves Torres (Mestrado)
Universidade de Aveiro, Portugal
2024/11/25 Desenvolvimento e conceção de um sistema de lamelas seccionadas que incorporam materiais de mudança de fase
Presidente do júri
Bruno José Mirra Guimarães (Mestrado)
2024 Development of a software application for calculation and analysis of the performance of heat exchangers in heat pumps
Orientador
Nuno Alves Sousa (Mestrado)
Universidade de Aveiro, Portugal
2024 Development of Liquid Propellant Rocket Engine
Orientador
Tiago Vaz Gândara (Mestrado)
Universidade de Aveiro, Portugal
2023/12/05 Caracterização e melhoria do rendimento de caldeiras a vapor
Presidente do júri
João Pedro Santos Almeida (Mestrado)
Universidade de Aveiro, Portugal
2023/11/28 Sustentabilidade no setor transportador: utilização de energia eólica como fonte energética para o Metropolitano de Lisboa
Presidente do júri
Diogo Filipe de Sousa Esteves (Mestrado)
Universidade de Aveiro, Portugal

Arbitragem científica em conferência

Nome da conferência Local da conferência
2024 - 2024 TEchMA 2024 - 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2019/01/11 - Atual Symmetry (2073-8994) MDPI

Comissão de avaliação

Descrição da atividade
Tipo de assessoria
Instituição / Organização Entidade financiadora
2024 - Atual Evaluator of the Portugal 2030 Projects, Productive Innovation (calls MPr–2023 –1 and MPr–2023 –2).
Avaliador
Agência para a Competitividade e Inovação IP, Portugal
2016/01 - 2016/06 Member of external evaluation committees of the Higher Education Assessment and Accreditation Agency (A3ES)
Membro
A3ES - Agência de Avaliação e Acreditação do Ensino Superior, Portugal

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2019 - Atual Performance tests for adsorption heat pumps in collaboration with Bosch Thermotechnology.

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2022/02 - 2022/08 Mecânica dos Fluidos Engenharia Mecânica (Mestrado integrado) Universidade de Aveiro, Portugal
2022/02 - 2022/08 Mecânica de Fluidos Computacional Engenharia Mecânica (Mestrado) Universidade de Aveiro, Portugal
2020/02 - 2022/08 Desenho Técnico Engenharia Mecânica (Mestrado integrado) Universidade de Aveiro, Portugal
2018/02 - 2019/07/31 Engenharia Térmica Engenharia Mecânica (Mestrado integrado) Universidade de Aveiro, Portugal
2017/09 - 2019/02 Projeto de Sistemas Térmicos Engenharia Mecânica (Mestrado integrado) Universidade de Aveiro, Portugal

Revisão ad hoc de artigos em revista

Nome da revista (ISSN) Editora
2025 - Atual Energy (1873-6785) Elsevier
2024/04 - Atual Applied Thermal Engineering (1873-5606) Elsevier
2021 - Atual Processes (2227-9717) MDPI
2021 - Atual Journal of Environmental Chemical Engineering (2213-3437) Elsevier
2020 - Atual Energy Conversion and Management (0196-8904) Elsevier
2019/03/08 - Atual Energies (1996-1073) MDPI AG
2019/01/11 - Atual Symmetry (2073-8994) MDPI AG
2018/11/23 - Atual Applied Sciences (2076-3417) MDPI AG
Distinções

Prémio

2018 Best Pitch Award at Research Summit 2018
Universidade de Aveiro, Portugal