???global.info.a_carregar???
Andrea CAVAGNINO. Completed the Doutoramento in Electrical Engineering in 2020 by Politecnico di Torino. Is Full Professor in Politecnico di Torino. Prof Cavagnino’s researches include the innovative electromagnetic and thermal design and energetic behavior of electric machines, with the development of advanced design schemes, magnetic material characterization, and loss modeling for specific and innovative applications (e.g. industrial induction motors, axial-flux IPM motor for in-wheel motor applications, multi-phase electrical machines, high speed machines, permanent magnet brushless generators for aircraft, 48V automotive starters/generators) During his career, prof Cavagnino published more than 250 papers in peer-reviewed international journals (84), international conference proceedings (167), and chapter books (3). The Scopus H-index and citations of prof. Cavagnino are h-index = 42, citations = 7890.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Andrea CAVAGNINO

Nomes de citação

  • CAVAGNINO, Andrea

Identificadores de autor

Ciência ID
D511-4316-61E5
ORCID iD
0000-0003-0636-9012

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Eletrotécnica, Eletrónica e Informática - Engenharia Eletrotécnica e Eletrónica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Italiano (Idioma materno)
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Formação
Grau Classificação
2020
Concluído
 Electrical Engineering (Doutoramento)
Especialização em Energy
Politecnico di Torino, Itália
"“Interior permanent magnet axial flux motor for light traction applications: Realization and characterization of the prototype"" (TESE/DISSERTAÇÃO)
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2016 - Atual Professor Catedrático (Docente Universitário) Politecnico di Torino, Itália
Politecnico di Torino, Itália
2011 - 2016 Professor Associado (Docente Universitário) Politecnico di Torino, Itália
2001 - 2011 Professor Auxiliar (Docente Universitário) Politecnico di Torino, Itália
Produções

Publicações

Artigo em conferência
  1. Biasion, M.; Fernandes, J.F.P.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.. "Superconductivity and its Application in the Field of Electrical Machines". 2021.
    10.1109/IEMDC47953.2021.9449545
  2. Darmani, M.A.; Vaschetto, S.; Cavagnino, A.; Popescu, M.. "Electromagnetic and Thermal Evaluation of Surface-Mounted PM Vernier Machines". 2021.
    10.1109/ECCE47101.2021.9595723
  3. Graffeo, F.; Stiscia, O.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.. "Doubly Excitated Synchronous Machines for Traction Applications". 2021.
    10.1109/ISIE45552.2021.9576244
  4. Darmani, M.A.; Vaschetto, S.; Cavagnino, A.. "Multiphysic Design and Modeling of Rotating Electrical Machines". 2021.
    10.1109/IECON48115.2021.9589145
  5. Wockinger, D.; Bramerdorfer, G.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.; Amrhein, W.; Jeskey, F.. "Approaches for Improving Lumped Parameter Thermal Networks for Outer Rotor SPM Machines". 2021.
    10.1109/ECCE47101.2021.9594930
  6. Vaschetto, S.; Agamloh, E.; Graffeo, F.; Cavagnino, A.. "Comparison of Superposition Equivalent Loading Methods for Induction Machine Temperature Tests". 2021.
    10.1109/ECCE47101.2021.9595325
  7. Gmyrek, Z.; Cavagnino, A.. "Analytical Model of the Ferromagnetic Properties in Laminations Damaged by Cutting". 2021.
    10.1109/ECCE47101.2021.9595736
  8. Biasion, M.; Joao Fernandes, F.P.; Branco, P.J.D.C.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.. "A Comparison of Cryogenic-Cooled and Superconducting Electrical Machines". 2021.
    10.1109/ECCE47101.2021.9595182
  9. Gmyrek, Z.; Vaschetto, S.; Cavagnino, A.. "FEM Modeling of Surface Losses in Accordance with Their Nature". 2021.
    10.1109/IEMDC47953.2021.9449596
  10. Darmani, M.A.; Poskovic, E.; Franchini, F.; Ferraris, L.; Cavagnino, A.. "Multiple layer magnetic materials for variable flux permanent magnet machines". 2020.
    10.1109/ICEM49940.2020.9270754
  11. Agamloh, E.; Vaschetto, S.; Cavagnino, A.; Von Jouanne, A.; Yokochi, A.. "Alternative methods for electric machine rated load temperature tests". 2020.
    10.1109/ECCE44975.2020.9235365
  12. Bailey, L.; Jara, W.; Madariaga, C.; Riedemann, J.; Tapia, J.; Bramerdorfer, G.; Cavagnino, A.. "Semi-analytical finite element study of the slot leakage inductance of double-layer windings". 2020.
    10.1109/ICEM49940.2020.9270794
  13. Stiscia, O.; Rubino, S.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.. "Off-Line Efficiency Mapping of Induction Motors Operated in Wide Torque-Speed Ranges". 2020.
    10.1109/ECCE44975.2020.9236081
  14. Scelba, G.; Camuglia, D.; De Donato, G.; Vaschetto, S.; Cavagnino, A.; Agamloh, E.. "On the Effects of Ultra-High Switching Frequency on PWM-Inverter-Fed Induction Motors". 2020.
    10.1109/ECCE44975.2020.9235437
  15. Gmyrek, Z.; Cavagnino, A.; Vaschetto, S.; Bramerdorfer, G.. "Loss Modeling for Interlocked Magnetic Cores". 2020.
    10.1109/ECCE44975.2020.9235682
  16. Wockinger, D.; Bramerdorfer, G.; Drexler, S.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.; Amrhein, W.; Jeske, F.. "Measurement-Based Optimization of Thermal Networks for Temperature Monitoring of Outer Rotor PM Machines". 2020.
    10.1109/ECCE44975.2020.9236388
  17. Darmani, M.A.; Poskovic, E.; Vaschetto, S.; Franchini, F.; Ferraris, L.; Cavagnino, A.. "Multilayer Bonded Magnets in Surface-Mounted PM Synchronous Machines". 2020.
    10.1109/ECCE44975.2020.9235742
  18. Graffeo, F.; Vaschetto, S.; Cossale, M.; Kerschbaumer, M.; Bortoni, E.C.; Cavagnino, A.. "Cylindrical wound-rotor synchronous machines for traction applications". 2020.
    10.1109/ICEM49940.2020.9270992
  19. Darmani, M.A.; Poškovic, E.; Ferraris, L.; Cavagnino, A.. "Multiple Layer Compression of SMC and PM Powdered Materials". 2019.
    10.1109/IECON.2019.8927574
  20. Darmani, M.A.; Poskovic, E.; Bramerdorfer, G.; Vaschetto, S.; Cavagnino, A.; Tenconi, A.. "Surface-mounted and flux-switching PM structures trade-off for automotive smart actuators". 2019.
    10.1109/ECCE.2019.8912915
  21. Agamloh, E.; Cavagnino, A.; Vaschetto, S.. "Induction machine efficiency at variable frequencies". 2019.
    10.1109/ECCE.2019.8912969
  22. Stiscia, O.; Slunjski, M.; Levi, E.; Cavagnino, A.. "Sensorless Control of a Nine-phase Surface Mounted Permanent Magnet Synchronous Machine with Highly Non-Sinusoidal Back-EMF". 2019.
    10.1109/IECON.2019.8926989
  23. Darmani, M.A.; Bramerdorfer, G.; Vaschetto, S.; Cavagnino, A.; Carabelli, S.. "Analysis of PM machines with sectored-stator". 2019.
    10.1109/IEMDC.2019.8785205
  24. Cavagnino, A.; Vaschetto, S.; Gmyrek, Z.. "Hybrid Method for Measuring Rotor Bar-Lamination Contact Resistances". 2019.
    10.1109/ECCE.2019.8912647
  25. Vaschetto, S.; Darmani, M.A.; Cavagnino, A.; Tenconi, A.. "Nanofluids for rotating electrical machines cooling: Perspectives and challenges". 2019.
    10.23919/EPE.2019.8915554
  26. Gmyrek, Z.; Cavagnino, A.; Vaschetto, S.. "FEM analysis of the inter-bar currents in induction motors aimed at estimating contact resistance". 2019.
    10.1109/IEMDC.2019.8785101
  27. Cavagnino, A.; Vaschetto, S.; Ferraris, L.; Gmyrek, Z.; Agamloh, E.; Bramerdorfer, G.. "Spatial MMF harmonic mitigation in aluminum-cage induction motors". 2019.
    10.1109/ECCE.2019.8913113
  28. Vaschetto, S.; Bramerdorfer, G.; Cavagnino, A.; Tenconi, A.. "Analytically-based optimization of SMPM machines for sizing validation purposes". 2019.
    10.1109/IEMDC.2019.8785195
  29. Poskovic, E.; Ferraris, L.; Franchini, F.; Cavagnino, A.; Grande, M.A.. "SMC materials in electrical machine prototypes". 2019.
    10.1109/IEMDC.2019.8785066
  30. Vaschetto, S.; Cavagnino, A.; Agamloh, E.B.; Tenconi, A.. "A new Zig-Zag Variable Load Test Approach for Enhanced Stray-Load Loss Measurements". 2019.
    10.1109/ECCE.2019.8912272
  31. Cavagnino, A.; Vaschetto, S.; Dorrell, D.G.. "Fast characterization of AC windings". 2018.
    10.1109/IECON.2018.8591724
  32. Agamloh, E.; Cavagnino, A.; Vaschetto, S.. "Applicability of superposition equivalent loading method for induction machine temperature tests". 2018.
    10.1109/IECON.2018.8591721
  33. Poskovic, E.; Ferraris, L.; Pallavicini, E.; Cavagnino, A.. "Compaction of SMC Materials by Applying External Magnetic Fields to the Mold". 2018.
    10.1109/ECCE.2018.8557600
  34. Cavagnino, A.; Pellegrino, G.; Estebsari, A.; Armando, E.; Bojoi, R.. "A New Laboratory for Hands-on Teaching of Electrical Engineering". 2018.
    10.1109/ISIE.2018.8433848
  35. Cavagnino, A.; Vaschetto, S.; Ferraris, L.; Gmyrek, Z.; Agamloh, E.; Bramerdorfer, G.. "Towards an IE4 Efficiency Class for Induction Motors with Minimal Manufacturer Impact". 2018.
    10.1109/ECCE.2018.8557586
  36. Agamloh, E.; Cavagnino, A.; Vaschetto, S.. "Induction machine efficiency measurement using a variable frequency drive source". 2017.
    10.1109/ECCE.2017.8095862
  37. Yulong, P.; Cavagnino, A.; Vaschetto, S.; Feng, C.; Tenconi, A.. "Flywheel energy storage systems for power systems application". 2017.
    10.1109/ICCEP.2017.8004733
  38. Yulong, P.; Feng, C.; Cavagnino, A.; Vaschetto, S.; Tenconi, A.. "Equivalent permeability method for multiple machine analysis by a single 2d-FEA model". 2017.
    10.1109/IECON.2017.8216327
  39. Franchini, F.; Poskovic, E.; Ferraris, L.; Cavagnino, A.; Bramerdorfer, G.. "Application of new magnetic materials for axial flux machine prototypes". 2017.
    10.1109/IEMDC.2017.8002212
  40. Gamba, M.; Pellegrino, G.; Cavagnino, A.; Gmyrek, Z.; Lefik, M.. "Rotor end effects on FEM-based flux mapping of synchronous reluctance motors". 2017.
    10.1109/IEMDC.2017.8002220
  41. Bramerdorfer, G.; Cavagnino, A.; Vaschetto, S.. "Importance of thermal modeling for design optimization scenarios of induction motors". 2017.
    10.1109/ECCE.2017.8096796
  42. Bramerdorfer, G.; Cavagnino, A.; Vaschetto, S.. "Cost-optimal machine designs fulfilling efficiency requirements: A comparison of IMs and PMSMs". 2017.
    10.1109/IEMDC.2017.8002044
  43. Cavagnino, A.; Vaschetto, S.; Agamloh, E.. "Practical considerations on the off-line measurements ofPMSM and SyRM inductances". 2017.
    10.1109/ECCE.2017.8095922
  44. Gmyrek, Z.; Cavagnino, A.. "Assembly effects on stator cores of small synchronous reluctance motors". 2017.
    10.1109/ECCE.2017.8096578
  45. Gmyrek, Z.; Lefik, M.; Cavagnino, A.; Ferraris, L.. "Comparison of the fractional power LSSR motor with cores made of various magnetic materials". 2017.
    10.1109/ISEF.2017.8090709
  46. Odhano, S.A.; Cavagnino, A.; Bojoi, R.; Tenconi, A.. "Induction motor magnetizing characteristic identification at standstill with single-phase tests conducted through the inverter". 2016.
    10.1109/IEMDC.2015.7409177
  47. Bramerdorfer, G.; Cavagnino, A.; Vaschetto, S.. "Impact of IM pole count on material cost increase for achieving mandatory efficiency requirements". 2016.
    10.1109/IECON.2016.7793940
  48. Cavagnino, A.; Gmyrek, Z.. "Stator lamination geometry influence on the building factor of synchronous reluctance motor cores". 2016.
    10.1109/ECCE.2016.7855467
  49. Agamloh, E.; Cavagnino, A.; Vaschetto, S.. "Accurate determination of induction machine torque and current versus speed characteristics". 2016.
    10.1109/ECCE.2016.7854812
  50. Cavagnino, A.. "On the accuracy of the slot leakage inductance analytical computation". 2016.
    10.1109/ICELMACH.2016.7732788
  51. Cavagnino, A.; Cossale, M.; Tenconi, A.; Vaschetto, S.. "Prototyping experiences on 48V starter-alternators". 2016.
    10.1109/ICELMACH.2016.7732799
  52. Rubino, S.; Bojoi, R.; Cavagnino, A.; Vaschetto, S.. "Asymmetrical twelve-phase induction starter/generator for more electric engine in aircraft". 2016.
    10.1109/ECCE.2016.7854889
  53. Gmyrek, Z.; Cavagnino, A.. "Modified single sheet tester system for engineering measurements". 2016.
    10.1109/ICELMACH.2016.7732783
  54. Bojoi, R.; Cavagnino, A.; Gmyrek, Z.; Lefik, M.. "Post-annealing behaviors of small-size synchronous reluctance motors". 2016.
    10.1109/IECON.2016.7793739
  55. Parvin, F.; Nasiri-Zarandi, R.; Mirsalim, M.; Cavagnino, A.. "General design algorithm for a hybrid hysteresis motor based on mathematical modeling". 2016.
    10.1109/IECON.2016.7793627
  56. Bojoi, R.; Cavagnino, A.; Gmyrek, Z.; Lefik, M.. "Experimental assessment of the annealing effects on magnetic core of fractional power synchronous reluctance motors". 2016.
    10.1109/ICELMACH.2016.7732752
  57. Odhano, S.; Cavagnino, A.; Bojoi, R.. "Theoretical analysis of the synchronous reactance influence on the speed regulation of PM motors". 2016.
    10.1109/ISIE.2016.7744893
  58. Tinazzi, F.; Zigliotto, M.; Boglietti, A.; Cavagnino, A.; Cossale, M.. "Energy efficiency assessment for inverter-fed induction motors". 2016.
    10.1049/cp.2016.0356
  59. Agamloh, E.; Cavagnino, A.; Vaschetto, S.. "Impact of number of poles on the steady-state performance of induction motors". 2015.
    10.1109/ECCE.2015.7309698
  60. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Cossale, M.; Tenconi, A.. "Analysis of different forced convection cooling systems for belt-driven starter-generator". 2015.
    10.1109/IECON.2015.7392796
  61. Bojoi, R.; Cavagnino, A.; Tenconi, A.; Tessarolo, A.; Vaschetto, S.. "Multiphase electrical machines and drives in the transportation electrification". 2015.
    10.1109/RTSI.2015.7325099
  62. Popescu, M.; Staton, D.; Boglietti, A.; Cavagnino, A.; Hawkins, D.; Goss, J.. "Modern heat extraction systems for electrical machines - A review". 2015.
    10.1109/WEMDCD.2015.7194542
  63. Bojoi, R.; Cavagnino, A.; Odhano, S.A.; Tenconi, A.; Vaschetto, S.. "Experimental fault assessment on multiphase PM generators with fractional-slot concentrated windings". 2015.
    10.1109/IECON.2015.7392875
  64. Bojoi, R.; Cavagnino, A.; Cossale, M.; Tenconi, A.; Vaschetto, S.. "Design Trade-off and Experimental Validation of multiphase starter generators for 48V mini-hybrid powertrain". 2015.
    10.1109/IEVC.2014.7056179
  65. Armando, E.; Boglietti, A.; Bojoi, R.; Cavagnino, A.; Tenconi, A.. "Test rig for induction motor quasi-static electromechanical characteristic determination". 2014.
    10.1109/IECON.2014.7048611
  66. Cavagnino, A.; Tenconi, A.; Vaschetto, S.. "Experimental characterization of a belt-driven multi-phase induction machine for 48 v automotive applications: Losses and temperatures assessments". 2014.
    10.1109/ICELMACH.2014.6960329
  67. Bojoi, R.; Cavagnino, A.; Cossale, M.; Tenconi, A.. "Multiphase starter generator for 48V mini-hybrid powertrain: Design and testing". 2014.
    10.1109/SPEEDAM.2014.6872029
  68. Krings, A.; Cossale, M.; Soulard, J.; Boglietti, A.; Cavagnino, A.. "Manufacturing influence on the magnetic properties and iron losses in cobalt-iron stator cores for electrical machines". 2014.
    10.1109/ECCE.2014.6954167
  69. Bojoi, R.; Cavagnino, A.; Cossale, M.; Vaschetto, S.. "Methodology for the IPM motor magnetic model computation based on finite element analysis". 2014.
    10.1109/IECON.2014.7048580
  70. Cavagnino, A.; Tenconi, A.; Rizzoli, G.; Mengoni, M.; Serra, G.. "Multiphase induction machine for aero-engine shaft-line-embedded starter/generator: Scaled prototypes testing". 2014.
    10.1109/ICELMACH.2014.6960475
  71. Cossale, M.; Krings, A.; Soulard, J.; Boglietti, A.; Cavagnino, A.. "Practical investigations on cobalt-iron laminations for electrical machines". 2014.
    10.1109/ICELMACH.2014.6960363
  72. Hafner, M.; Popescu, M.; Boglietti, A.; Cavagnino, A.. "Analytic modeling of inverter-fed induction machines - A practical approach for matching measurement and simulation data". 2014.
    10.1109/ICELMACH.2014.6960159
  73. Agamloh, E.B.; Cavagnino, A.. "High efficiency design of induction machines for industrial applications". 2013.
    10.1109/WEMDCD.2013.6525163
  74. Agamloh, E.B.; Boglietti, A.; Cavagnino, A.. "Interchanging induction motors for fifty Hertz and sixty Hertz operation". 2013.
    10.1109/IECON.2013.6699599
  75. Boglietti, A.; Cavagnino, A.; Cossale, M.; Tenconi, A.; Vaschetto, S.. "Efficiency determination of converter-fed induction motors: Waiting for the IEC 60034-2-3 standard". 2013.
    10.1109/ECCE.2013.6646705
  76. Tosetti, M.; Maggiore, P.; Cavagnino, A.; Vaschetto, S.. "Conjugate heat transfer analysis of integrated brushless generators for more electric engines". 2013.
    10.1109/ECCE.2013.6646885
  77. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Vaschetto, S.. "Influence of the sinusoidal supply frequency on the induction motor stray load losses". 2012.
    10.1109/IECON.2012.6388920
  78. Boglietti, A.; Cavagnino, A.; Saied, S.; Vaschetto, S.. "Experimental identification and reduction of acoustic noise in small brushed DC motors". 2012.
    10.1109/ICElMach.2012.6350106
  79. Boglietti, A.; Cavagnino, A.; Popescu, M.; Staton, D.. "Thermal model and analysis of wound rotor induction machine". 2012.
    10.1109/ECCE.2012.6342387
  80. Bojoi, R.; Cavagnino, A.; Tenconi, A.; Vaschetto, S.. "Multiphase PM machine for More Electric Aircraft applications: Prototype for design validation". 2012.
    10.1109/IECON.2012.6389315
  81. Gmyrek, Z.; Cavagnino, A.; Ferraris, L.. "Estimation of magnetic properties and damaged area width due to punching process: Modeling and experimental research". 2012.
    10.1109/ICElMach.2012.6350045
  82. Boglietti, A.; Cavagnino, A.; Tenconi, A.. "Low cost solutions to reduce cogging torque and acoustic noise of small brushed DC motors for automotive radiator Cooling Fan Modules". 2012.
    10.1109/IECON.2012.6388916
  83. Cavagnino, A.; Li, Z.; Tenconi, A.; Vaschetto, S.. "Integrated generator for more electric engine: Design and testing of a scaled size prototype". 2012.
    10.1109/ECCE.2012.6342774
  84. Agamloh, E.; Boglietti, A.; Cavagnino, A.. "The incremental design efficiency improvement of commercially manufactured induction motors". 2012.
    10.1109/ECCE.2012.6342829
  85. Alberti, L.; Bianchi, N.; Boglietti, A.; Cavagnino, A.. "Core axial lengthening as effective solution to improve the induction motor efficiency classes". 2011.
    10.1109/ECCE.2011.6064227
  86. Gmyrek, Z.; Cavagnino, A.. "Analytical method for determining the damaged area width in magnetic materials due to punching process". 2011.
    10.1109/IECON.2011.6119573
  87. Gmyrek, Z.; Boglietti, A.; Cavagnino, A.. "No-load loss separation in induction motors operated by PWM inverters: Numerical and experimental approaches". 2011.
    10.1109/IECON.2011.6119603
  88. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Guglielmi, P.; Miotto, A.. "Analysis and modeling of rotor slot enclosure effects in high speed induction motors". 2011.
    10.1109/ECCE.2011.6063763
  89. Boglietti, A.; Cavagnino, A.; Lazzari, M.; Miotto, A.; Vaschetto, S.. "Induction motor design methodology based on rotor diameter progressive growth". 2011.
    10.1109/ECCE.2011.6064187
  90. Cavagnino, A.; Lazzari, M.; Miotto, A.; Tenconi, A.; Vaschetto, S.. "Impact of the rotor back-iron resistivity on the rotor eddy-current losses in fractional-slot concentrated windings PM machines". 2011.
    10.1109/ECCE.2011.6063974
  91. Boglietti, A.; Cavagnino, A.; Vaschetto, S.. "Induction motor EU standards for efficiency evaluation: The scenario after IEC 60034-2-1". 2011.
    10.1109/IECON.2011.6119753
  92. Popescu, M.; Staton, D.; Boglietti, A.; Cavagnino, A.; Jennings, S.; Barucki, T.. "Experimental validation of a simple multiphysics model for drum roller driven by induction motor". 2011.
    10.1109/IECON.2011.6119587
  93. Guglielmi, P.; Bojoi, R.; Pellegrino, G.; Cavagnino, A.; Pastorelli, M.; Boglietti, A.. "High speed sensorless control for induction machines in vacuum pump application". 2011.
    10.1109/IECON.2011.6119591
  94. Cavagnino, A.; Miotto, A.; Tenconi, A.; Vaschetto, S.. "Eddy current losses reduction in fractional slot concentrated winding PM generators for more electric engine application". 2011.
    10.1109/ICCEP.2011.6036336
  95. Boglietti, A.; Cavagnino, A.; Jennings, S.; Popescu, M.; Staton, D.A.. "Assessment of fractional and small power three phase induction motors for conveyor applications". 2010.
    10.1109/ICELMACH.2010.5607722
  96. Staton, D.A.; Popescu, M.; Hawkins, D.; Boglietti, A.; Cavagnino, A.. "Influence of different end region cooling arrangements on end-winding heat transfer coefficients in electrical machines". 2010.
    10.1109/ECCE.2010.5617810
  97. Bojoi, R.; Pellegrino, G.; Cavagnino, A.; Guglielmi, P.. "Direct Flux Vector Control of Axial Flux IPM motors for in-wheel traction solutions". 2010.
    10.1109/IECON.2010.5674955
  98. Bojoi, R.; Cavagnino, A.; Miotto, A.; Tenconi, A.; Vaschetto, S.. "Radial flux and axial flux PM machines analysis for more electric engine aircraft applications". 2010.
    10.1109/ECCE.2010.5618110
  99. Boglietti, A.; Cavagnino, A.; Tenconi, A.; Vaschetto, S.. "Key design aspects of electrical machines for high-speed spindle applications". 2010.
    10.1109/IECON.2010.5675417
  100. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Ferraris, L.. "No-load operations of induction motors under PWM supply". 2010.
    10.1109/ISIE.2010.5637208
  101. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Lazzari, M.. "Core loss estimation method for PWM inverter fed induction motors". 2010.
    10.1109/IECON.2010.5675180
  102. Grande, M.A.; Bidulsky, R.; Cavagnino, A.; Ferraris, L.; Ferraris, P.. "New lines of investigation on the effects of processing conditions on soft magnetic composite materials behaviour for electromagnetic applications". 2010.
    10.1109/ECCE.2010.5617880
  103. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Impact of the supply voltage on the stray load losses in induction motors". 2009.
    10.1109/ECCE.2009.5316512
  104. Actis Grande, M.; Boglietti, A.; Cavagnino, A.; Ferraris, L.; Ferraris, P.. "Experimental analysis of materials for electromagnetic converters obtainable by powder pressing". 2009.
    10.1109/IECON.2009.5414683
  105. Boglietti, A.; Cavagnino, A.; Tenconi, A.; Vaschetto, S.. "The safety critical electric machines and drives in the more electric aircraft: A survey". 2009.
    10.1109/IECON.2009.5415238
  106. Boglietti, A.; Cavagnino, A.; Ionel, D.M.; Popescu, M.; Staton, D.A.; Vaschetto, S.. "A general model to predict the iron losses in inverter fed induction motors". 2009.
    10.1109/ECCE.2009.5316538
  107. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Fast method for the iron losses prediction in inverter fed induction motors". 2009.
    10.1109/IEMDC.2009.5075181
  108. Boglietti, A.; Cavagnino, A.; Staton, D.A.; Popescu, M.. "Impact of different end region cooling arrangements on endwinding heat transfer coefficients in electric motors". 2009.
    10.1109/IECON.2009.5414657
  109. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Modelling of the closed rotor slot effects in the induction motor equivalent circuit". 2008.
    10.1109/ICELMACH.2008.4799834
  110. Boglietti, A.; Cavagnino, A.; Knight, A.M.. "Isolating the impact of PWM modulation on motor iron losses". 2008.
    10.1109/08IAS.2008.50
  111. Gmyrek, Z.; Boglietti, A.; Cavagnino, A.. "Estimation and analysis of iron losses in induction motors under sinusoidal and PWM excitation". 2008.
    10.1109/ICELMACH.2008.4800065
  112. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Algorithms for the computation of the induction motor equivalent circuit parameters - Part II". 2008.
    10.1109/IECON.2008.4758268
  113. Cavagnino, A.; Ferraris, L.; Ferraris, P.. "Adoption of cast copper squirrel cages for small induction motors: Considerations on a prototype". 2008.
    10.1109/IECON.2008.4758266
  114. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Algorithms for the computation of the induction motor equivalent circuit parameters - Part I". 2008.
    10.1109/IECON.2008.4758267
  115. Ionel, D.; Popescu, M.; Cossar, C.; McGilp, M.I.; Boglietti, A.; Cavagnino, A.. "A general model of the laminated steel losses in electric motors with PWM voltage supply". 2008.
    10.1109/08IAS.2008.46
  116. Boglietti, A.; Cavagnino, A.; Staton, D.A.; Popescu, M.; Cossar, C.; McGilp, M.I.. "End space heat transfer coefficient determination for different induction motor enclosure types". 2008.
    10.1109/08IAS.2008.49
  117. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Skin effect experimental validations of induction motor squirrel cage parameters". 2008.
    10.1109/ICELMACH.2008.4799971
  118. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Induction motor equivalent circuit including the stray load losses in the machine power balance". 2007.
    10.1109/IECON.2007.4459901
  119. Marignetti, F.; Colli, V.D.; Di Stefano, R.; Cavagnino, A.. "Design issues of a fractional-slot windings axial flux PM machine with soft magnetic compound stator". 2007.
    10.1109/IECON.2007.4460217
  120. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Energetic considerations about the use of cast copper squirrel cage induction motors". 2007.
    10.1109/IECON.2007.4459928
  121. Boglietti, A.; Cavagnino, A.. "Iron loss prediction with PWM supply: An overview of proposed methods from an engineering application point of view". 2007.
  122. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Geometrical approach to induction motor design". 2007.
    10.1109/IECON.2007.4459894
  123. Boglietti, A.; Cavagnino, A.; Staton, D.. "Determination of critical parameters in electrical machine thermal models". 2007.
    10.1109/07ias.2007.60
  124. Boglietti, A.; Cavagnino, A.; Knight, A.M.; Zhan, Y.. "Factors affecting losses in induction motors with non-sinusoidal supply". 2007.
    10.1109/IAS.2007.187
  125. Staton, D.A.; Cavagnino, A.. "Convection heat transfer and flow calculations suitable for analytical modelling of electric machines". 2006.
    10.1109/IECON.2006.348143
  126. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Tenconi, A.. "Efficiency analysis of PWM inverter fed three-phase and dual three-phase induction machines". 2006.
    10.1109/IAS.2006.256557
  127. Cavagnino, A.; Tenconi, A.; Campanile, P.; Anzioso, F.. "Thermally integrated induction generator for adjustable speed reciprocating cogeneration systems". 2006.
    10.1109/ISEIMA.2006.344951
  128. Lamine, A.; Levi, E.; Cavagnino, A.. "Compensation of stray load loss induced detuning in rotor flux oriented induction machines". 2006.
    10.1109/UPEC.2006.367566
  129. Aroquiadassou, G.; Henao, H.; Capolino, G.A.; Boglietti, A.; Cavagnino, A.. "A simple circuit-oriented model for predicting six-phase induction machine performances". 2006.
    10.1109/IECON.2006.347469
  130. Boglietti, A.; Cavagnino, A.. "Analysis of the endwinding cooling effects in TEFC induction motors". 2006.
    10.1109/IAS.2006.256617
  131. Gmyrek, Z.; Boglietti, A.; Cavagnino, A.. "Iron losses prediction with PWM supply using low and high frequency measurements: Analysis and results comparison". 2006.
    10.1109/IECON.2006.347608
Artigo em revista
  1. Federica Graffeo; Silvio Vaschetto; Alessio Miotto; Fabio Carbone; Alberto Tenconi; Andrea Cavagnino. "Lumped-Parameters Thermal Network of PM Synchronous Machines for Automotive Brake-by-Wire Systems". Energies (2021): https://doi.org/10.3390/en14185652.
    10.3390/en14185652
  2. Zbigniew Gmyrek; Silvio Vaschetto; Mostafa Ahmadi Darmani; Andrea Cavagnino. "Errata to “Noninvasive Measurements and FEM Analyses for Estimating the Rotor Bar-Lamination Contact Resistance” [Jan/Feb 21 208-217]". IEEE Transactions on Industry Applications 57 4 (2021): 4347-4347. https://doi.org/10.1109/TIA.2021.3080435.
    10.1109/TIA.2021.3080435
  3. Zbigniew Gmyrek; Silvio Vaschetto; Mostafa Ahmadi Darmani; Andrea Cavagnino. "Noninvasive Measurements and FEM Analyses for Estimating the Rotor Bar-Lamination Contact Resistance". IEEE Transactions on Industry Applications 57 1 (2021): 208-217. https://doi.org/10.1109/TIA.2020.3028347.
    10.1109/TIA.2020.3028347
  4. Silvio Vaschetto; Andrea Cavagnino; Emmanuel B. Agamloh; Alberto Tenconi. "Enhanced Stray-Load Loss Measurements Through a Zigzag Variable Load Test Approach". IEEE Transactions on Industry Applications 57 1 (2021): 226-235. https://doi.org/10.1109/TIA.2020.3029757.
    10.1109/TIA.2020.3029757
  5. Edson da Costa Bortoni; Roberto Teixeira Siniscalchi; Silvio Vaschetto; Mostafa Ahmadi Darmani; Andrea Cavagnino. "Efficiency Mapping and Weighted Average Efficiency for Large Hydrogenerators". IEEE Open Journal of Industry Applications 2 (2021): 11-20. https://doi.org/10.1109/OJIA.2020.3048989.
    10.1109/OJIA.2020.3048989
  6. Gerd Bramerdorfer; Gang Lei; Andrea Cavagnino; Yongchang Zhang; Jan Sykulski; David A. Lowther. "More Robust and Reliable Optimized Energy Conversion Facilitated through Electric Machines, Power Electronics and Drives, and Their Control: State-of-the-Art and Trends". IEEE Transactions on Energy Conversion 35 4 (2020): 1997-2012. https://doi.org/10.1109/TEC.2020.3013190.
    10.1109/TEC.2020.3013190
  7. Andrea Cavagnino; Silvio Vaschetto; Luca Ferraris; Zbigniew Gmyrek; Emmanuel B. Agamloh; Gerd Bramerdorfer. "Striving for the Highest Efficiency Class With Minimal Impact for Induction Motor Manufacturers". IEEE Transactions on Industry Applications (2020): 1-1. https://doi.org/10.1109/TIA.2019.2949262.
    10.1109/TIA.2019.2949262
  8. Bramerdorfer, G.; Cavagnino, A.; Choi, S.; Lei, G.; Lowther, D.; Stipetic, S.; Sykulski, J.; Zhang, Y.; Zhu, J.G.. "Guest Editorial: Robust Design and Analysis of Electric Machines and Drives". IEEE Transactions on Energy Conversion 35 4 (2020): 1995-1996. http://www.scopus.com/inward/record.url?eid=2-s2.0-85097218309&partnerID=MN8TOARS.
    10.1109/TEC.2020.3035940
  9. Andrea Cavagnino; Gianmario Pellegrino; Silvio Vaschetto; Emmanuel B. Agamloh. "Contribution to Offline Measurements of PMSM and SyRM Inductances". IEEE Transactions on Industry Applications 55 1 (2019): 407-416. https://doi.org/10.1109/TIA.2018.2869100.
    10.1109/TIA.2018.2869100
  10. Emmanuel B. Agamloh; Andrea Cavagnino; Silvio Vaschetto. "Standard Efficiency Determination of Induction Motors With a PWM Inverter Source". IEEE Transactions on Industry Applications (2019): 1-1. https://doi.org/10.1109/TIA.2018.2869118.
    10.1109/TIA.2018.2869118
  11. Gerd Bramerdorfer; Juan A. Tapia; Juha J. Pyrhonen; Andrea Cavagnino. "Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices". IEEE Transactions on Industrial Electronics 65 10 (2018): 7672-7684. https://doi.org/10.1109/TIE.2018.2801805.
    10.1109/TIE.2018.2801805
  12. Zbigniew Gmyrek; Andrea Cavagnino. "Influence of Punching, Welding, and Clamping on Magnetic Cores of Fractional KiloWatt Motors". IEEE Transactions on Industry Applications 54 5 (2018): 4123-4132. https://doi.org/10.1109/TIA.2018.2829769.
    10.1109/TIA.2018.2829769
  13. Matteo Gamba; Gianmario Pellegrino; Andrea Cavagnino; Zbigniew Gmyrek; Marcin Lefik. "Impact of Rotor End Effects on FEM-Based Flux Mapping of Synchronous Reluctance Motors". IEEE Transactions on Industry Applications 54 5 (2018): 4114-4122. https://doi.org/10.1109/TIA.2018.2829775.
    10.1109/TIA.2018.2829775
  14. Pei Yulong; Andrea Cavagnino; Silvio Vaschetto. "Virtual Material Method for Enabling a Single 2D-FEA Simulation of Electrical Machine Sets". IEEE Transactions on Energy Conversion 33 3 (2018): 1354-1362. https://doi.org/10.1109/TEC.2018.2806567.
    10.1109/TEC.2018.2806567
  15. Cavagnino, A.; Bramerdorfer, G.; Tapia, J.A.. "Optimization of electric machine Designs-Part II". IEEE Transactions on Industrial Electronics 65 2 (2017): 1700-1703. http://www.scopus.com/inward/record.url?eid=2-s2.0-85048230339&partnerID=MN8TOARS.
    10.1109/TIE.2017.2770758
  16. Andrea Cavagnino; Radu Bojoi; Zbigniew Gmyrek; Marcin Lefik. "Stator Lamination Geometry Influence on the Building Factor of Synchronous Reluctance Motor Cores". IEEE Transactions on Industry Applications (2017): 1-1. https://doi.org/10.1109%2Ftia.2017.2683439.
    10.1109/TIA.2017.2683439
  17. Cavagnino, A.; Bramerdorfer, G.; Tapia, J.A.. "Optimization of Electric Machine Designs-Part I". IEEE Transactions on Industrial Electronics 64 12 (2017): 9716-9720. http://www.scopus.com/inward/record.url?eid=2-s2.0-85033234091&partnerID=MN8TOARS.
    10.1109/TIE.2017.2753359
  18. Krings, A.; Cossale, M.; Tenconi, A.; Soulard, J.; Cavagnino, A.; Boglietti, A.. "Magnetic materials used in electrical machines: A comparison and selection guide for early machine design". IEEE Industry Applications Magazine 23 6 (2017): 21-28. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029147972&partnerID=MN8TOARS.
    10.1109/MIAS.2016.2600721
  19. Boglietti, A.; Cavagnino, A.; Krings, A.. "New Magnetic Materials for Electrical Machines and Power Converters". IEEE Transactions on Industrial Electronics 64 3 (2017): 2402-2404. http://www.scopus.com/inward/record.url?eid=2-s2.0-85015052479&partnerID=MN8TOARS.
    10.1109/TIE.2016.2630021
  20. Krings, A.; Boglietti, A.; Cavagnino, A.; Sprague, S.. "Soft Magnetic Material Status and Trends in Electric Machines". IEEE Transactions on Industrial Electronics 64 3 (2017): 2405-2414. http://www.scopus.com/inward/record.url?eid=2-s2.0-85015095901&partnerID=MN8TOARS.
    10.1109/TIE.2016.2613844
  21. Gmyrek, Z.; Lefik, M.; Cavagnino, A.; Ferraris, L.. "Comparison of the fractional power motor with cores made of various magnetic materials". Open Physics 15 1 (2017): 827-832. http://www.scopus.com/inward/record.url?eid=2-s2.0-85040862562&partnerID=MN8TOARS.
    10.1515/phys-2017-0097
  22. Andrea Cavagnino. "Accuracy-Enhanced Algorithms for the Slot Leakage Inductance Computation of Double-Layer Windings". IEEE Transactions on Industry Applications (2017): 1-1. https://doi.org/10.1109%2Ftia.2017.2712687.
    10.1109/TIA.2017.2712687
  23. Emmanuel Agamloh; Andrea Cavagnino; Silvio Vaschetto. "Accurate Determination of Induction Machine Torque and Current versus Speed Characteristics". IEEE Transactions on Industry Applications (2017): 1-1. https://doi.org/10.1109%2Ftia.2017.2675984.
    10.1109/TIA.2017.2675984
  24. Bojoi, R.; Cavagnino, A.; Tenconi, A.; Vaschetto, S.. "Control of shaft-line-embedded multiphase starter/generator for aero-engine". IEEE Transactions on Industrial Electronics 63 1 (2016): 641-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960967931&partnerID=MN8TOARS.
    10.1109/TIE.2015.2472637
  25. Popescu, M.; Staton, D.A.; Boglietti, A.; Cavagnino, A.; Hawkins, D.; Goss, J.. "Modern Heat Extraction Systems for Power Traction Machines - A Review". IEEE Transactions on Industry Applications 52 3 (2016): 2167-2175. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973294751&partnerID=MN8TOARS.
    10.1109/TIA.2016.2518132
  26. Agamloh, E.B.; Cavagnino, A.; Vaschetto, S.. "Impact of Number of Poles on the Steady-State Performance of Induction Motors". IEEE Transactions on Industry Applications 52 2 (2016): 1422-1430. http://www.scopus.com/inward/record.url?eid=2-s2.0-84963815479&partnerID=MN8TOARS.
    10.1109/TIA.2015.2502555
  27. Hafner, M.; Popescu, M.; Boglietti, A.; Cavagnino, A.. "Analytic Modeling of Inverter-Fed Induction Machines-A Practical Approach for Matching Measurement and Simulation Data". IEEE Transactions on Industry Applications 52 6 (2016): 4710-4718. http://www.scopus.com/inward/record.url?eid=2-s2.0-84999836880&partnerID=MN8TOARS.
    10.1109/TIA.2016.2594039
  28. Cossale, M.; Krings, A.; Soulard, J.; Boglietti, A.; Cavagnino, A.. "Practical Investigations on Cobalt-Iron Laminations for Electrical Machines". IEEE Transactions on Industry Applications 51 4 (2015): 2933-2939. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937939405&partnerID=MN8TOARS.
    10.1109/TIA.2015.2394404
  29. Nasiri-Zarandi, R.; Mirsalim, M.; Cavagnino, A.. "Analysis, Optimization, and Prototyping of a Brushless DC Limited-Angle Torque-Motor with Segmented Rotor Pole Tip Structure". IEEE Transactions on Industrial Electronics 62 8 (2015): 4985-4993. http://www.scopus.com/inward/record.url?eid=2-s2.0-84934326177&partnerID=MN8TOARS.
    10.1109/TIE.2015.2402115
  30. Bojoi, R.; Cavagnino, A.; Cossale, M.; Tenconi, A.. "Multiphase starter generator for 48V mini-hybrid powertrain: Design and testing". IEEE Transactions on Industry Applications 2015 (2015): 1750-1758. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944144969&partnerID=MN8TOARS.
    10.1109/TIA.2015.2487351
  31. Andrea Cavagnino; Alberto Tenconi; Silvio Vaschetto. "Experimental Characterization of a Belt-Driven Multi-Phase Induction Machine for 48 V Automotive Applications: Losses and Temperatures Assessments". IEEE Transactions on Industry Applications (2015): 1-1. http://dx.doi.org/10.1109/TIA.2015.2487456.
    10.1109/TIA.2015.2487456
  32. Alberti, L.; Bianchi, N.; Boglietti, A.; Cavagnino, A.. "Core axial lengthening as effective solution to improve the induction motor efficiency classes". IEEE Transactions on Industry Applications 50 1 (2014): 218-225. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893216908&partnerID=MN8TOARS.
    10.1109/TIA.2013.2266632
  33. Capolino, G.-A.; Cavagnino, A.. "New trends in electrical machines technology - Part II". IEEE Transactions on Industrial Electronics 61 9 (2014): 4931-4936. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897395476&partnerID=MN8TOARS.
    10.1109/TIE.2014.2301740
  34. Capolino, G.-A.; Cavagnino, A.. "New trends in electrical machines technology-part I". IEEE Transactions on Industrial Electronics 61 8 (2014): 4281-4285. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896470961&partnerID=MN8TOARS.
    10.1109/TIE.2013.2295770
  35. Boglietti, A.; Gerada, C.; Cavagnino, A.. "High-speed electrical machines and drives". IEEE Transactions on Industrial Electronics 61 6 (2014): 2943-2945. http://www.scopus.com/inward/record.url?eid=2-s2.0-84891818339&partnerID=MN8TOARS.
    10.1109/TIE.2013.2286778
  36. Gerada, D.; Mebarki, A.; Brown, N.L.; Gerada, C.; Cavagnino, A.; Boglietti, A.. "High-speed electrical machines: Technologies, trends, and developments". IEEE Transactions on Industrial Electronics 61 6 (2014): 2946-2959. http://www.scopus.com/inward/record.url?eid=2-s2.0-84891823429&partnerID=MN8TOARS.
    10.1109/TIE.2013.2286777
  37. Tosetti, M.; Maggiore, P.; Cavagnino, A.; Vaschetto, S.. "Conjugate heat transfer analysis of integrated brushless generators for more electric engines". IEEE Transactions on Industry Applications 50 4 (2014): 2467-2475. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904598535&partnerID=MN8TOARS.
    10.1109/TIA.2013.2296657
  38. Cavagnino, A.; Saied, S.; Vaschetto, S.. "Experimental identification and reduction of acoustic noise in small brushed DC motors". IEEE Transactions on Industry Applications 50 1 (2014): 317-326. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893317007&partnerID=MN8TOARS.
    10.1109/TIA.2013.2271215
  39. Cavagnino, A.; Li, Z.; Tenconi, A.; Vaschetto, S.. "Integrated generator for more electric engine: Design and testing of a scaled-size prototype". IEEE Transactions on Industry Applications 49 5 (2013): 2034-2043. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884573388&partnerID=MN8TOARS.
    10.1109/TIA.2013.2259785
  40. Agamloh, E.B.; Boglietti, A.; Cavagnino, A.. "The incremental design efficiency improvement of commercially manufactured induction motors". IEEE Transactions on Industry Applications 49 6 (2013): 2496-2504. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890108653&partnerID=MN8TOARS.
    10.1109/TIA.2013.2263212
  41. Gmyrek, Z.; Cavagnino, A.; Ferraris, L.. "Estimation of the magnetic properties of the damaged area resulting from the punching process: Experimental research and FEM modeling". IEEE Transactions on Industry Applications 49 5 (2013): 2069-2077. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884557559&partnerID=MN8TOARS.
    10.1109/TIA.2013.2261041
  42. Boglietti, A.; Cavagnino, A.; Popescu, M.; Staton, D.. "Thermal model and analysis of wound-rotor induction machine". IEEE Transactions on Industry Applications 49 5 (2013): 2078-2084. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884661284&partnerID=MN8TOARS.
    10.1109/TIA.2013.2261444
  43. Boglietti, A.; Bojoi, R.I.; Cavagnino, A.; Guglielmi, P.; Miotto, A.. "Analysis and modeling of rotor slot enclosure effects in high-speed induction motors". IEEE Transactions on Industry Applications 48 4 (2012): 1279-1287. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864145875&partnerID=MN8TOARS.
    10.1109/TIA.2012.2199270
  44. Boglietti, A.; Cavagnino, A.; Lazzari, M.; Vaschetto, S.. "Preliminary induction motor electromagnetic sizing based on a geometrical approach". IET Electric Power Applications 6 9 (2012): 583-592. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868321099&partnerID=MN8TOARS.
    10.1049/iet-epa.2012.0037
  45. Grande, M.A.; Bidulsky, R.; Cavagnino, A.; Ferraris, L.; Ferraris, P.. "Investigations on different processing conditions on soft magnetic composite material behavior at low frequency". IEEE Transactions on Industry Applications 48 4 (2012): 1335-1343. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864129832&partnerID=MN8TOARS.
    10.1109/TIA.2012.2199951
  46. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Computational algorithms for induction motor equivalent circuit parameter determination-Part II: Skin effect and magnetizing characteristics". IEEE Transactions on Industrial Electronics 58 9 (2011): 3734-3740. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051732991&partnerID=MN8TOARS.
    10.1109/TIE.2010.2084975
  47. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Computational algorithms for induction-motor equivalent circuit parameter determination-Part I: Resistances and leakage reactances". IEEE Transactions on Industrial Electronics 58 9 (2011): 3723-3733. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051759620&partnerID=MN8TOARS.
    10.1109/TIE.2010.2084974
  48. Boglietti, A.; Cavagnino, A.; Staton, D.A.; Popescu, M.. "Experimental assessment of end region cooling arrangements in induction motor endwindings". IET Electric Power Applications 5 2 (2011): 203-209. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956316886&partnerID=MN8TOARS.
    10.1049/iet-epa.2010.0176
  49. Dorrell, D.G.; Cavagnino, A.. "Guest editorial". IEEE Transactions on Industrial Electronics 58 9 (2011): 3720-3722. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051771813&partnerID=MN8TOARS.
    10.1109/TIE.2011.2159673
  50. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Impact of the supply voltage on the stray-load losses in induction motors". IEEE Transactions on Industry Applications 46 4 (2010): 1374-1380. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954871805&partnerID=MN8TOARS.
    10.1109/TIA.2010.2049721
  51. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Skin effect experimental validations of induction motor squirrel cage parameters". COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 29 5 (2010): 1257-1265. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957015283&partnerID=MN8TOARS.
    10.1108/03321641011061461
  52. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Fast method for the iron loss prediction in inverter-fed induction motors". IEEE Transactions on Industry Applications 46 2 (2010): 806-811. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949883189&partnerID=MN8TOARS.
    10.1109/TIA.2010.2040055
  53. Gmyrek, Z.; Boglietti, A.; Cavagnino, A.. "Estimation of iron losses in induction motors: Calculation method, results, and analysis". IEEE Transactions on Industrial Electronics 57 1 (2010): 161-171. http://www.scopus.com/inward/record.url?eid=2-s2.0-72749113104&partnerID=MN8TOARS.
    10.1109/TIE.2009.2024095
  54. Boglietti, A.; Cavagnino, A.. "Iron loss prediction with PWM supply: An overview of proposed methods from an engineering application point of view". Electric Power Systems Research 80 9 (2010): 1121-1127. http://www.scopus.com/inward/record.url?eid=2-s2.0-81055155515&partnerID=MN8TOARS.
    10.1016/j.epsr.2010.03.003
  55. Popescu, M.; Ionel, D.M.; Boglietti, A.; Cavagnino, A.; Cossar, C.; McGilp, M.I.. "A general model for estimating the laminated steel losses under PWM voltage supply". IEEE Transactions on Industry Applications 46 4 (2010): 1389-1396. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954870403&partnerID=MN8TOARS.
    10.1109/TIA.2010.2049810
  56. Boglietti, A.; Cavagnino, A.; Ionel, D.M.; Popescu, M.; Staton, D.A.; Vaschetto, S.. "A general model to predict the iron losses in PWM inverter-fed induction motors". IEEE Transactions on Industry Applications 46 5 (2010): 1882-1890. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956942921&partnerID=MN8TOARS.
    10.1109/TIA.2010.2057393
  57. Boglietti, A.; Cavagnino, A.; Staton, D.; Shanel, M.; Mueller, M.; Mejuto, C.. "Evolution and modern approaches for thermal analysis of electrical machines". IEEE Transactions on Industrial Electronics 56 3 (2009): 871-882. http://www.scopus.com/inward/record.url?eid=2-s2.0-63149168028&partnerID=MN8TOARS.
    10.1109/TIE.2008.2011622
  58. Boglietti, A.; Cavagnino, A.; Staton, D.A.; Popescu, M.; Cossar, C.; McGilp, M.I.. "End space heat transfer coefficient determination for different induction motor enclosure types". IEEE Transactions on Industry Applications 45 3 (2009): 929-937. http://www.scopus.com/inward/record.url?eid=2-s2.0-66949149850&partnerID=MN8TOARS.
    10.1109/TIA.2009.2018967
  59. Staton, D.A.; Cavagnino, A.. "Convection heat transfer and flow calculations suitable for electric machines thermal models". IEEE Transactions on Industrial Electronics 55 10 (2008): 3509-3516. http://www.scopus.com/inward/record.url?eid=2-s2.0-54249158797&partnerID=MN8TOARS.
    10.1109/TIE.2008.922604
  60. Boglietti, A.; Cavagnino, A.; Staton, D.. "Determination of critical parameters in electrical machine thermal models". IEEE Transactions on Industry Applications 44 4 (2008): 1150-1159. http://www.scopus.com/inward/record.url?eid=2-s2.0-49249126133&partnerID=MN8TOARS.
    10.1109/TIA.2008.926233
  61. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Induction motor equivalent circuit including the stray load losses in the machine power balance". IEEE Transactions on Energy Conversion 23 3 (2008): 796-803. http://www.scopus.com/inward/record.url?eid=2-s2.0-50649114866&partnerID=MN8TOARS.
    10.1109/TEC.2008.921467
  62. Aroquiadassou, G.; Cavagnino, A.; Henao, H.; Boglietti, A.; Capolino, G.-A.. "A new circuit-oriented model for the analysis of six-phase induction machine performances". Electric Power Systems Research 78 10 (2008): 1798-1805. http://www.scopus.com/inward/record.url?eid=2-s2.0-45449086649&partnerID=MN8TOARS.
    10.1016/j.epsr.2008.03.008
  63. Boglietti, A.; Cavagnino, A.; Ferraris, L.; Lazzari, M.. "Energy-efficient motors". IEEE Industrial Electronics Magazine 2 4 (2008): 32-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-58149136412&partnerID=MN8TOARS.
    10.1109/MIE.2008.930360
  64. Gmyrek, Z.; Boglietti, A.; Cavagnino, A.. "Iron loss prediction with PWM supply using low- and high-frequency measurements: Analysis and results comparison". IEEE Transactions on Industrial Electronics 55 4 (2008): 1722-1728. http://www.scopus.com/inward/record.url?eid=2-s2.0-42549142134&partnerID=MN8TOARS.
    10.1109/TIE.2008.917067
  65. Boglietti, A.; Bojoi, R.; Cavagnino, A.; Tenconi, A.. "Efficiency analysis of PWM inverter fed three-phase and dual three-phase high frequency induction machines for low/medium power applications". IEEE Transactions on Industrial Electronics 55 5 (2008): 2015-2023. http://www.scopus.com/inward/record.url?eid=2-s2.0-44349173686&partnerID=MN8TOARS.
    10.1109/TIE.2008.918489
  66. Boglietti, A.; Cavagnino, A.; Lazzari, M.. "Experimental high-frequency parameter identification of ac electrical motors". IEEE Transactions on Industry Applications 43 1 (2007): 23-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-33947196836&partnerID=MN8TOARS.
    10.1109/TIA.2006.887313
  67. Boglietti, A.; Cavagnino, A.. "Analysis of the endwinding cooling effects in TEFC induction motors". IEEE Transactions on Industry Applications 43 5 (2007): 1214-1222. http://www.scopus.com/inward/record.url?eid=2-s2.0-35348825648&partnerID=MN8TOARS.
    10.1109/TIA.2007.904399
  68. Boglietti, A.; Cavagnino, A.; Parvis, M.; Vallan, A.. "Evaluation of radiation thermal resistances in industrial motors". IEEE Transactions on Industry Applications 42 3 (2006): 688-693. http://www.scopus.com/inward/record.url?eid=2-s2.0-33744543106&partnerID=MN8TOARS.
    10.1109/TIA.2006.873655
  69. Levi, E.; Lamine, A.; Cavagnino, A.. "Impact of stray load losses on vector control accuracy in current-fed induction motor drives". IEEE Transactions on Energy Conversion 21 2 (2006): 442-450. http://www.scopus.com/inward/record.url?eid=2-s2.0-33744545845&partnerID=MN8TOARS.
    10.1109/TEC.2006.874241
Capítulo de livro
  1. Cavagnino, A.; Lazzari, M.. "AC Machine windings". 2.1-2.33. 2016.

Outros

Outra produção
  1. Coordinator/co-Coordinator of 26 contracts and consultancies on electrical machine design. Coordinator/co-Coordinator of 26 contracts and consultancies on electrical machine design, testing and optimization for Italian/International electromechanical factories (list of the contracts available on request). Most of Professor Cavagnino's work outcomes are used in the companies currently manufactured products with very good results, including the full satisfaction of the costumers. 2002.
Atividades

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2019 - 2022 IEEE Power&Energy Society (IEEE TEC) - Associate Editor IEEE
2007 - 2017 IEEE Industry Applications Society - Associate Editor IEEE
2011 - 2016 IEEE Industrial Electronics Society - Associate Editor IEEE

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2018 - Atual COMET K2 CENTER FOR SYMBIOTIC MECHATRONICS (01/01/2018, 4 years, 75,000 Euros), founded by the Austrian Federal Ministry for Transport, Innovation and Technology and the Austrian Federal Ministry of Science, Research and Economy and the State of Upper Austria Scientific coordinator of the Politecnico di Torino (scientific partner) for developing theoretical and applied research in the field of electric machine design and thermal machine analysis Politecnico di Torino, Itália
2013 - 2015 BIOMETHAIR - REGIONAL RESEARCH PROGRAM (01/03/2013, 28 months, 112,900 Euros) Scientific Coordinator of the Task 22 Task 22 “Study and development of high efficiency electrical machines”: WP 2 was to develop high-speed, high-efficiency electric machines for the mild hybrid vehicle Task 22 was focused on the design and prototyping of a 10 kW, 20,000 rpm belt-driven starter/generator, also targeted to new technologies suitable for hybrid vehicle

Membro de comissão

Descrição da atividade
Tipo de participação 		Instituição / Organização
2014 - Atual LABORATORIO INTERDIPARTIMENTALE MAKELAB (48,000 Euros) – POLITECNICO DI TORINO FUNDING PROGRAM (01/01/2014, 36 months) Scientific Coordinators of the Section 7 “Electrical Motors” focused on the themes of linear electrical motors for high dynamics (able to impose accelerations of up to 5 g), and the Very High Speed (VHS) electrical motors with rated power above 50 kW capable of rotating at speeds of up to 100000 rpm
Coordenador
 Politecnico di Torino, Itália
2020 - 2020 Member of the board of examiners for the open competition for a full professor position at the University of Bologna ‘Alma Master Studiorum’
Membro
 Università degli Studi di Bologna, Itália
2014 - 2020 Coordination Member of the Electrical, Electronics and Communications Engineering PhD Course
Coordenador
 Politecnico di Torino, Itália
2012 - 2020 Coordination Member of Electrical Engineering Bachelors Master Science Course
Coordenador
 Politecnico di Torino, Itália
2012 - 2020 Chairman of the “Laboratory Commission” (Commissione Laboratori) of the Department of Energy (DENERG)
Presidente / Vice-presidente
 Politecnico di Torino, Itália
2019 - 2019 Member of the board of examiners for the open competition for an associate professor position at the University of Rome ‘La sapienza’
Membro
 Università degli Studi di Roma La Sapienza, Itália
2013 - 2014 Electrical Machine Committee Chair of the Industrial Electronics Society
Presidente / Vice-presidente
 IEEE, Estados Unidos
2007 - 2007 Member of the board of examiners for the open competition for a researcher position at the Politecnico di Milano
Membro
 Politecnico di Milano, Itália
2002 - 2002 Member of the board of examiners for the open competition for a researcher position at the University of Pavia
Membro
 Università degli Studi di Pavia, Itália
Distinções

Prémio

2016 Premio pubblicazioni
Politecnico di Torino, Itália
2009 Paper award, third prize, “Impact of different end region cooling arrangements on endwinding heat transfer coefficients in electric motors”
IEEE Industrial Electronics Society, Estados Unidos
2008 Paper award, first prize, “A General Model of the Laminated Steel Losses in Electric Motors with PWM Voltage Supply “
IEEE Industrial Electronics Society, Estados Unidos
2007 Paper award, third prize, “Energetic Considerations about the Use of Cast Copper Squirrel Cage Induction Motors”
IEEE Industrial Electronics Society, Estados Unidos

Título

2020 Fellow IEEE
IEEE, Estados Unidos