???global.info.a_carregar???
Luis Reis, graduated in Mechanical Engineering at the Faculty of Science and Technology, New University of Lisbon, 1994, and obtained a Master's and Doctor's degree in Mechanical Engineering from Instituto Superior Técnico (IST) - University of Lisbon (UL ), in 1996 and 2004, respectively. He is an Associate Professor in the Mechanical Engineering Department of IST - UL since 2009 and is an integrated member of the research centre IDMEC (Institute of Mechanical Engineering). Member of the Scientific Commission of the Integrated master’s in Mechanical Engineering (MEMec) of IST-UL. Integrates the Scientific Area of Mechanical Design and Materials in Engineering and participates in research activities related to the design and development of products, the analysis of failures in mechanical systems, the mechanical behaviour of materials and the additive manufacture of parts and components. To date, he has supervised 8 Doctoral Dissertations in Mechanical Engineering and in Leaders for Technological Industries, 115 Master's Dissertations in Mechanical Engineering and Aerospace Engineering. He is the author of more than 150 scientific articles published in scientific journals and in national and international conference proceedings, 6 book chapters, having been a guest speaker at seminars and short courses held in Portugal and abroad, and he frequently reviews scientific articles for international magazines and for national and international conferences. He has been member of Organizing Commissions and Scientific Commissions of several national and international conferences and edited several publications - Special Issues - of National and International conferences. He is also a member of the editorial board of 4 international scientific journals. He is member of the Technical Commission for National Standardization CT 115 / SC9 - Structural Eurocodes since 2010. As an expert-evaluator, he has prepared several technical-scientific opinions of candidate projects for the Incentive System for R&D Centres and R&D projects in Co-promotion of Innovation Agency. He has participated in several national and international research projects. He is a member of the Order of Engineers and vice-president of Portuguese Society of Fracture and Structural Integrity.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Luis Reis

Nomes de citação

  • Reis, Luis

Identificadores de autor

Ciência ID
C314-AC5A-16D2
ORCID iD
0000-0001-9848-9569
Researcher Id
B-4723-2013
Scopus Author Id
7006497004

Endereços de correio eletrónico

  • luis.g.reis@tecnico.ulisboa.pt (Profissional)

Telefones

Telemóvel
  • 966415585 (Pessoal)

Moradas

  • Instituto Superior Tecnico - DEM - Av. Rovisco Pais, 1, 1049-001, Lisboa, Lisboa, Portugal (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Projetos

Projeto

Designação Financiadores
2025/01/01 - 2029/12/31 Laboratório Associado de Energia, Transportes e Aeroespacial
UID/50022/2025
10.54499/UID/50022/2025
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2021/01/01 - 2025/12/31 Associate Laboratory of Energy, Transports and Aerospace.
LA/P/0079/2020
10.54499/LA/P/0079/2020
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/01/01 - 2024/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UIDP/50022/2020
10.54499/UIDP/50022/2020
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Sampaio, Rui F.V.; Pragana, J.P.M; Reis, Luis; Bragança, I.M.F.; Silva, Carlos; Martins, P.A.F.. Autor correspondente: Sampaio, Rui F.V.. "Electro-mechanical performance of double-flushed riveted joints". Trabalho apresentado em ICMR2024 - 5th International Conference on Manufacturing Research, Glasgow, 2024.
  2. Simões, Alda Maria Pereira; Canut, Felipe; Reis, Luis; Napoleão Bastos, Ivan; Mamiya, Edgar. "Electrochemical assessment of corrosion-fatigue degradation stages". 2022.
    10.34637/zz27-pa50
Artigo em revista
  1. Francisco Pina; Carlos M. S. Vicente; Joaquim Justino Netto; Luís Reis. "Static and Cyclic Mechanical Behavior of 3D-Printed PEEK Under Tensile and Compressive Loads". Polymers (2026): https://doi.org/10.3390/polym18060748.
    10.3390/polym18060748
  2. Rafael Eringer Cubi; Rodolfo Luiz Prazeres Gonçalves; Marcos Massi; Gleicy de Lima Xavier Ribeiro; Luis Reis; Antonio Augusto Couto. "Comparison of Microstructure and Fatigue Life of Laser Powder Bed Fusion and Forging/Rolling Inconel 718 Alloy After Solution Heat Treatment and Double Aging". Metals (2026): https://doi.org/10.3390/met16010057.
    10.3390/met16010057
  3. Bruno Caetano dos Santos Silva; Luã Fonseca Seixas; Bruna Callegari; Rodolfo Lisboa Batalha; Luis Reis; Andersan dos Santos Paula; Leonardo Barbosa Godefroid; Gilmar Ferreira Batalha; Rodrigo Santiago Coelho. "Influence of build orientation and thermal treatment on the fracture toughness of LPBF-manufactured 18Ni300 maraging steel". Journal of Materials Research and Technology (2026): https://doi.org/10.1016/j.jmrt.2025.12.134.
    10.1016/j.jmrt.2025.12.134
  4. Haselibozchaloee, Danial; Correia, José A. F. O.; Manuel, Lance; Reis, Luis; Braga, Daniel F. O.; Zavvar, Esmaeil; Moreira, Pedro M. G. P.. "Fatigue Crack Growth Evaluation in SLM C300 Margining Steel Using Data-Driven Predictive Models". Fatigue & Fracture of Engineering Materials & Structures (2025): https://doi.org/10.1111/ffe.70161.
    10.1111/ffe.70161
  5. Nogueira, Pedro; Magrinho, João P. G.; Batalha, Rodolfo L.; Rosa, Maria J.; Cabral, Ana; Morais, Paulo; Reis, Luis; et al. "Selection of Processing Parameters in Laser Powder Bed Fusion for the Production of Iron Cellular Structures". Metals 15 12 (2025): 1355. https://doi.org/10.3390/met15121355.
    10.3390/met15121355
  6. Alex Fukunaga Gomes; Henrique Correa dos Santos; Roberto Seno; Adriano Francisco; Nelson Batista de Lima; Gisele Fabiane Costa Almeida; Luis Reis; Marcos Massi; Antonio Augusto Couto. "Laser Cladding of Iron Aluminide Coatings for Surface Protection in Soderberg Electrolytic Cells". Metals (2025): https://doi.org/10.3390/met15121337.
    10.3390/met15121337
  7. Sina Safari; Diogo Montalvão; Pedro R. da Costa; Luís Reis; Manuel Freitas. "Statistical calibration of ultrasonic fatigue testing machine and probabilistic fatigue life estimation". International Journal of Fatigue (2025): https://doi.org/10.1016/j.ijfatigue.2025.109028.
    10.1016/j.ijfatigue.2025.109028
  8. Denis Benasciutti; Luis Reis; Julian Marcell Enzveiler Marques. "Mechanical Behaviors and Damage Mechanisms of Metallic Materials". Metals (2025): https://doi.org/10.3390/met15090979.
    10.3390/met15090979
  9. Gleicy de Lima Xavier Ribeiro; Luis Reis; Rene de Oliveira; Marcos Massi; Rodolfo Luiz Gonçalves; Antônio Augusto Couto. "The Influence of Manufacturing Parameters and Heat Treatments on the Properties of AlSi10Mg Alloy Produced Using L-PBF". Metals (2025): https://doi.org/10.3390/met15090941.
    10.3390/met15090941
  10. Pedro Tomé; Manuel Sardinha; M Fátima Vaz; Luís Reis. "Design and stiffness assessment of non-pneumatic bicycle tyres with latticed cores produced by fused filament fabrication". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025): https://doi.org/10.1177/14644207251345056.
    10.1177/14644207251345056
  11. Francisco Bumba; Vitor Anes; Luis Reis. "An Innovative Algorithm for Damage Mapping in Multiaxial Fatigue Using the Stress Scale Factor (SSF) Concept". Metals (2025): https://doi.org/10.3390/met15030281.
    10.3390/met15030281
  12. J. Henrique Lopes; Pedro R. da Costa; Manuel Freitas; Luís Reis. "Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue". Fatigue & Fracture of Engineering Materials & Structures (2025): https://doi.org/10.1111/ffe.14532.
    10.1111/ffe.14532
  13. Manuel Sardinha; Joana Pinto; Frederico Alves; Tânia RP Ramos; Luís Reis; M Fátima Vaz. "Vertical stiffness of functionally graded hexagonal honeycomb structures for non-pneumatic tyres produced by fused filament fabrication". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025): https://doi.org/10.1177/14644207251320835.
    10.1177/14644207251320835
  14. Martin Matušu; Jan Šimota; Jan Papuga; Jakub Rosenthal; Libor Beránek; Pedro Costa; Francisco Bumba; Luis Reis. "S–N curves established from limiting energy in the case of specimens additively manufactured from AlSi10Mg". Fatigue & Fracture of Engineering Materials & Structures (2024): https://doi.org/10.1111/ffe.14442.
    10.1111/ffe.14442
  15. Pedro Nogueira; João Magrinho; Luis Reis; Augusto Moita de Deus; Maria Beatriz Silva; Pedro Lopes; Luís Oliveira; et al. "Mechanical and Corrosion Behaviour in Simulated Body Fluid of As-Fabricated 3D Porous L-PBF 316L Stainless Steel Structures for Biomedical Implants". Journal of Functional Biomaterials (2024): https://doi.org/10.3390/jfb15100313.
    10.3390/jfb15100313
  16. Pedro Nogueira; Maria Beatriz Silva; Augusto Moita de Deus; Ricardo Cláudio; Maria Carmezim; Catarina Santos; João Magrinho; et al. "Evaluation of the roughness of lattice structures of AISI 316 stainless steel produced by laser powder bed fusion". Engineering Manufacturing Letters (2024): https://doi.org/10.24840/2795-5168_002-001_2682.
    10.24840/2795-5168_002-001_2682
  17. Manuel Sardinha; Luís Ferreira; Tânia Ramos; Luís Reis; M. Fátima Vaz. "Challenges on extrusion-based additive manufacturing of thermoplastic polyurethane". Engineering Manufacturing Letters (2024): https://doi.org/10.24840/2795-5168_002-001_2675.
    10.24840/2795-5168_002-001_2675
  18. Danial Haselibozchaloee; José A. F. O. Correia; Daniel F. O. Braga; Gonçalo Cipriano; Luis Reis; Lance Manuel; Pedro M. G. P. Moreira. "Quantifying uncertainty in fatigue crack growth of SLM 316L through advanced predictive modeling". Fatigue & Fracture of Engineering Materials & Structures (2024): https://doi.org/10.1111/ffe.14361.
    10.1111/ffe.14361
  19. Alda MP Simões; Felipe A Canut; Edgar N Mamiya; Luis Reis. "Corrosion susceptibility of mooring chain steel under cyclic stress". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207241270782.
    10.1177/14644207241270782
  20. Inês Mendes; J. Henrique Lopes; Eduardo Matos Almas; Luís Reis. "Failure Analysis of the Half-Shafts Belonging to a Three-Wheeled Electric Vehicle". Metals (2024): https://doi.org/10.3390/met14060727.
    10.3390/met14060727
  21. Henrique Videira; Vitor Anes; Luis Reis. "Stress-Based Model for Calculating the Opening Angle of Notch Cracks in a Magnesium Alloy under Multiaxial Fatigue". Crystals (2024): https://doi.org/10.3390/cryst14030211.
    10.3390/cryst14030211
  22. MC Salama; F Alves; L Reis; AM Deus; MB Silva; C Santos; MJ Carmezim; MF Vaz. "Mechanical and corrosion performance of biodegradable iron porous structures". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207231188709.
    10.1177/14644207231188709
  23. Pedro R. Costa; Luís Reis; Manuel Freitas. "Very High Cycle Fatigue and Ultrasonic Testing in Multiaxial Loading". Materials Performance and Characterization (2023): https://doi.org/10.1520/MPC20220110.
    10.1520/MPC20220110
  24. Manuel Sardinha; M Fátima Vaz; Tânia RP Ramos; Luís Reis. "Design, properties, and applications of non-pneumatic tires: A review". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023): https://doi.org/10.1177/14644207231177302.
    10.1177/14644207231177302
  25. Francisco Bumba; Paulo Morais; Rodolfo Batalha; Vitor Anes; Luis Reis. "Review on Laser Shock Peening Effect on Fatigue of Powder Bed Fusion Materials". Metals (2023): https://doi.org/10.3390/met13101762.
    10.3390/met13101762
  26. Alexandra A. Arbex; Luis Reis; Gisele F.C. Almeida; Abrão C. Merij; Marcos Massi; Antônio A. Couto. "Cracking failure analysis due to fatigue of the Ti-6Al-4V alloy coated with SiC layer and Cr interlayer deposited by magnetron sputtering". Engineering Failure Analysis (2023): https://doi.org/10.1016/j.engfailanal.2023.107325.
    10.1016/j.engfailanal.2023.107325
  27. Vitor Anes; Cristina B. Neves; Valeria Bostan; Sérgio B. Gonçalves; Luís Reis. "Evaluation of the Retentive Forces from Removable Partial Denture Clasps Manufactured by the Digital Method". Applied Sciences (2023): https://doi.org/10.3390/app13148072.
    10.3390/app13148072
  28. Mario Vieira; Brian Snyder; Elsa Henriques; Craig White; Luis Reis. "Economic Viability of Implementing Structural Health Monitoring Systems on the Support Structures of Bottom-Fixed Offshore Wind". Energies (2023): https://doi.org/10.3390/en16134885.
    10.3390/en16134885
  29. Vitor Anes; Rogério Moreira; Luís Reis; Manuel Freitas. "Simulation of the Cyclic Stress–Strain Behavior of the Magnesium Alloy AZ31B-F under Multiaxial Loading". Crystals (2023): https://doi.org/10.3390/cryst13060969.
    10.3390/cryst13060969
  30. Vitor Anes; Francisco Bumba; Luís Reis; Manuel Freitas. "Determination of the Relationship between Proportional and Non-Proportional Fatigue Damage in Magnesium Alloy AZ31 BF". Crystals (2023): https://doi.org/10.3390/cryst13040688.
    10.3390/cryst13040688
  31. Mário Vale; Sofia Orišková; António Mariquito; Luís Reis; Moisés Pinto; Ana C. Marques. "Multicomponent oxide microspheres with designed macroporosity (MICROSCAFS®): a customized platform for chemicals immobilization". RSC Advances (2023): https://doi.org/10.1039/D3RA00895A.
    10.1039/D3RA00895A
Poster em conferência
  1. Carlos M. S. Vicente; Branco, Ana Catarina; Leite, Marco; Reis, Luis. Autor correspondente: Carlos M. S. Vicente. "Physical and Mechanical properties of Optical Components produced by Additive Manufacturing". Trabalho apresentado em European Conference on Fracture 2022 (ECF23), 2022.
Pré-impressão
  1. Martin Matušu; Jan Šimota; Jan Papuga; Jakub Rosenthal; Libor Beránek; Pedro R. da Costa; Francisco Bumba; Luis Reis. "Estimation of the S-N curve from limiting energy for additively manufactured specimens from AlSi10Mg". 2024. https://doi.org/10.22541/au.171783141.12775708/v1.
    10.22541/au.171783141.12775708/v1
Atividades

Arbitragem científica em conferência

Nome da conferência Local da conferência
2026/06/28 - 2026/07/03 14th International Fatigue Congress https://ifc14.tecnico.ulisboa.pt/
2024/06/26 - 2024/06/28 9th International Conference on Very High Cycle Fatigue https://vhcf9.tecnico.ulisboa.pt/