???global.info.a_carregar???
Fatih Toptan. Completed the Doutoramento in Materials Science in 2011 by Yildiz Teknik Üniversitesi, Mestrado in Materials Science in 2006 by Yildiz Teknik Üniversitesi and Licenciatura in Metallurgical and Material Engineering in 2002 by Yildiz Teknik Üniversitesi. Is Invited Scientist in Universidade do Minho Centro de Sistemas Microeletromecânicos. Published 45 articles in journals. Has 1 section(s) of books and 5 book(s). Organized 2 event(s). Co-supervised 4 PhD thesis(es). Supervised 7 MSc dissertation(s) e co-supervised 4. Participates and/or participated as Master Student Fellow in 1 project(s), PhD Student Fellow in 3 project(s), Pos-doc (no fellowship) in 1 project(s), Pos-doctoral Fellow in 3 project(s) and Principal investigator in 3 project(s). Works in the area(s) of Engineering and Technology with emphasis on Materials Engineering. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: metal matrix composites; surface functionalization; biomaterials; wear; corrosion; tribocorrosion; processing; .
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Fatih Toptan

Nomes de citação

  • Toptan, Fatih
  • Toptan, F.

Identificadores de autor

Ciência ID
8B1C-0F90-9C64
ORCID iD
0000-0001-9138-9119
Google Scholar ID
http://scholar.google.pt/citations?user=G1nbc4sAAAAJ&hl=en
Researcher Id
L-2739-2013
Scopus Author Id
23398312700

Telefones

Telefone
  • (+90) 2327507611 (Profissional)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Turco (Idioma materno)
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Português Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1)
Formação
Grau Classificação
2011
Concluído
 Materials Science (Doutoramento)
Yildiz Teknik Üniversitesi, Turquia
"Production of High Wear Resistant B4C Particle Reinforced Aluminium Matrix Composites" (TESE/DISSERTAÇÃO)
 19/20
2006
Concluído
 Materials Science (Mestrado)
Yildiz Teknik Üniversitesi, Turquia
"Processing of B4C-Reinforced Al Matrix Composites By Casting Technique" (TESE/DISSERTAÇÃO)
 16/20
2002
Concluído
 Metallurgical and Material Engineering (Licenciatura)
Yildiz Teknik Üniversitesi, Turquia
"Aluminium Matrix Composites for Automotive Industry and Production Methods" (TESE/DISSERTAÇÃO)
 14/20
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2007/11/01 - 2010/05/01 Investigador (Investigação) Yildiz Teknik Üniversitesi Kimya Metalurji Fakültesi, Turquia

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2020/11 - Atual Professor Associado (Docente Universitário) Izmir Yüksek Teknoloji Enstitüsü, Turquia
Izmir Yüksek Teknoloji Enstitüsü Mühendislik Fakültesi, Turquia
2013/05/21 - 2016/05/27 Professor Auxiliar Convidado (Docente Universitário) Universidade do Minho Departamento de Engenharia Mecânica, Portugal

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2017/11/01 - 2020/01 Invited Scientist Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/05/28 - 2018/09/27 Invited Assistant Professor (Part-Time) Universidade do Minho Departamento de Engenharia Mecânica, Portugal
2016/08/01 - 2017/06/30 Post-Doc Researcher Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2011/11/01 - 2013/05/01 Post-Doc Researcher Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal
2010/09/01 - 2011/08/01 Exchange PhD Student and Researcher Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal
Projetos

Bolsa

Designação Financiadores
2021/01 - 2025/12 Laboratório Associado em Biotecnologia, Bioengenharia e Sistemas microELetromecânicos
168158UID
 Fundação para a Ciência e a Tecnologia
2016/06 - 2020/05 Desenvolvimento de superfícies hibridas biofuncionalizadas resistentes à trbocorrosão de novas ligas de Ti
148204PRJ
 Fundação para a Ciência e a Tecnologia
2018 - 2020 A new concept for producing graded bio- functionalized materials for orthopaedic implants
2017/24300-4
Investigador Pós-doutorado
Fundação de Amparo à Pesquisa do Estado de São Paulo
Em curso
2019/01 - 2019/12 Unidade de Investigação em Microssistemas Eletromecânicos
154722UID
 Fundação para a Ciência e a Tecnologia
2016/06 - 2019/05 Development of bio-functionalized and tribocorrosion resistant hybrid surfaces on novel Ti-based alloys
M-ERA-NET/0001/2015
Investigador responsável
The Foundation for Science and Technology (FCT)
Em curso
2016/02 - 2019/02 Bio-functionalization of new titanium alloys with low elastic modulus
Proc.º 4.4.1.00
Investigador responsável
The Foundation for Science and Technology (FCT)
Concluído
2016/01 - 2017/12 Biofuncionalização de novas ligas de Ti com baixo módulo de elasticidade
688273476765806983472892472016DRI
 Fundação para a Ciência e a Tecnologia
2014/05 - 2016/05 Biofunctionalization of porous titanium implants with porosity gradient
TC-12_14, 2014
Investigador responsável
O Conselho de Reitores das Universidades Portuguesas (CRUP)
Concluído
2013/01 - 2015/12 Multi-material laser sintering for the production of Functional Graded Structures
grant.Provided by PTCRIS: 129123
Bolseiro de Pós-Doutoramento
Fundação para a Ciência e a Tecnologia
2013/01 - 2015/12 Sinterização laser multi-material para produção de estruturas com gradiente de propriedades
129123PRJ
 Fundação para a Ciência e a Tecnologia
2011/11 - 2012/03 Metal/porcelain interfaces for restorative dentistry
PTDC/CTM/67500/2006
Bolseiro de Pós-Doutoramento
Fundação para a Ciência e a Tecnologia
Concluído
2008/03 - 2010/11 Production of Al-Ti-C grain refiners by elemental carbon addition and investigation of grain refining performance
28-07-02-02
Bolseiro de Doutoramento
Yildiz Teknik Üniversitesi
Concluído
2007/11 - 2010/11 Development of wear resistant B4C reinforced (min 15%) lightweight aluminum matrix composites
107M338
Bolseiro de Doutoramento
Turkish Scientific and Research Council (TUBITAK)
Concluído
2007/07 - 2009/06 Production of Al-B4C composites with high particle ratios as a wear resistant material by developing matrix-reinforcement interface properties
27-07-02-01
Bolseiro de Doutoramento
Yildiz Teknik Üniversitesi
Concluído
2004/07 - 2006/05 Production and characterisation of aluminium matrix B4C reinforced composite automobile brake pads
24-07-02-08
Bolseiro de Mestrado
Yildiz Teknik Üniversitesi
Concluído

Projeto

Designação Financiadores
2012/05 - 2015/01 BIOFGM – Exploring the Functionally Graded Materials (FGM) concept to improve tribocorrosion behaviour and osseointegration capabilities of titanium implants
Fundação Calouste Gulbenkian Project
Bolseiro de Pós-Doutoramento
Fundação Calouste Gulbenkian
Concluído
Produções

Publicações

Artigo em conferência
  1. J. Ureña; R.G. Neves; S. Tsipas; A.C. Alves; A.M. Pinto; Toptan, Fatih; B. Ferrari; A. Jiménez-Morales; E. Gordo. "Strategies for improvement the wear and tribocorrosion behaviour of titanium alloys". Trabalho apresentado em IBERTRIB 2017 – IX Iber. Conf. Tribol, Guimarães, 2017.
    Publicado
  2. Gordo, E.; Ureña, J.; Toptan, F.; Pinto, A.M.; Ferrari, B.; Tsipas, S.; Jiménez-Morales, A.. "Design and evaluation of PM Ti surfaces modified by colloidal techniques and diffusion processes for biomedical applications". 2016.
  3. Toptan, F.; Kerti, I.; Daglilar, S.; Sagin, A.; Hacioglu, T.. "Effect of particle size particle surface modification pressing pressure and sintering temperature on microstructure and mechanical properties P/M Al-B 4C composites". 2011.
  4. Toptan, F.; Kerti, I.; Sagin, A.; Cigdem, M.; Daglilar, S.; Yuksel, F.. "Microstructural properties and wear behaviour of AlSi9Mg matrix B 4Cp reinforced composites". 2011.
  5. Toptan, F.; Kerti, I.; Daglilar, S.; Sagin, A.; Karadeniz, O.F.; Ambarkutuk, A.. "Production of Al-Ti-C grain refiners with the addition of elemental carbon and K2TiF6". 2011.
  6. A. Kiliçarslan; Toptan, Fatih; I. Kerti. "Modification of Surface Properties of Boron Carbide (B4C) Particles via Electroless Nickel Coating Technique (In Turkish)". Trabalho apresentado em IV International Boron Symposium, Eskisehir, 2009.
    Publicado
  7. T. Hacioglu; Toptan, Fatih; S. Daglilar; I. Kerti. "Production and Characterization of Al-B4Cp Composites by Powder Metallurgy Method (In Turkish)". Trabalho apresentado em IV International Boron Symposium, Eskisehir, 2009.
    Publicado
  8. Toptan, Fatih; A. Kiliçarslan; A. Karaaslan; I. Kerti. "Microstructural Characterisation of Matrix/Reinforcement Interface in Al-B4C Composites Produced with Ti Addition (In Turkish)". Trabalho apresentado em 5th International Advanced Technologies Symposium, Karabuk, 2009.
    Publicado
  9. Toptan, Fatih; A. Kiliçarslan; A. Karaaslan; M. Cigdem; I. Kerti. "Optimisation of Particle Addition Conditions in Production of Al-B4C Composites by Casting Route (In Turkish)". Trabalho apresentado em 14th Int. Metall. Mater. Congr., 2008.
    Publicado
  10. A. Kiliçarslan; Toptan, Fatih; I. Kerti. "Oxidation of Boron Carbide Powder (In Turkish)". Trabalho apresentado em 12th Int. Mater. Symp., Denizli, 2008.
    Publicado
  11. I. Kerti; Toptan, Fatih. "Microstructural and Wear Behaviour Investigations of Cast Al-B4C MMCs (In Turkish)". Trabalho apresentado em 3rd Int. Boron Symp., 2006.
    Publicado
  12. I. Kerti; Toptan, Fatih. "Processing of B4C-Reinforced Al Matrix Composites by Casting Technique (In Turkish)". Trabalho apresentado em 12th International Metallurgy-Materials Congress, Istanbul, 2005.
    Publicado
Artigo em jornal
  1. Sousa, Luís; Toptan, Fatih; Alves, Alexandra C.; Simões, Sónia; A.L. Rossi; N.A. Costa; S. Gemini-Piperni; Ribeiro, Ana R.. "Preliminary tribo-electrochemical and biological responses of the Ti-TiB-TiCx in-situ composites intended for load-bearing biomedical implants", 2022, https://www.sciencedirect.com/science/article/abs/pii/S0925838821043759.
    https://doi.org/10.1016/j.jallcom.2021.162965
  2. Sousa, Luís; Toptan, Fatih; Alves, Alexandra C.; Guedes, Aníbal José Reis. "Corrosion and tribocorrosion behaviour of Ti-B4C composites processed by conventional sintering and hot-pressing technique", 2021, https://www.sciencedirect.com/science/article/abs/pii/S0925838821025184.
    https://doi.org/10.1016/j.jallcom.2021.161109
  3. Sousa, Luís; Toptan, Fatih; Alves, Alexandra C.. "Tribocorrosion-resistant biofunctionalized Ti-Al2O3 composites", 2021, https://www.sciencedirect.com/science/article/abs/pii/S025789722100503X.
    https://doi.org/10.1016/j.surfcoat.2021.127329
Artigo em revista
  1. Ogur, Ezgi; Alves, Alexandra C.; Toptan, Fatih. "Advancing titanium-based surfaces via micro-arc oxidation with solid substance incorporation: A systematic review". Materials Today Communications 41 (2024): 110343. http://dx.doi.org/10.1016/j.mtcomm.2024.110343.
    10.1016/j.mtcomm.2024.110343
  2. Lima, Ana R.; Pinto, Ana M.P.; Toptan, Fatih; Alves, Alexandra C.. "Impact of simulated inflammation and food breakdown on the synergistic interaction between corrosion and wear on titanium". Corrosion Science 228 (2024): 111839. http://dx.doi.org/10.1016/j.corsci.2024.111839.
    10.1016/j.corsci.2024.111839
  3. Çaha, Ihsan; Türü, Irem Cemre; Erdogan, Ece; Pinto, Ana Maria; Cansever, Nurhan; Deepak, Francis Leonard; Toptan, Fatih; Alves, Alexandra C.. "Crystallization and additional oxide interlayers improve the tribocorrosion resistance of TiO2 nanotubular surfaces formed on Ti6Al4V". Applied Surface Science 635 (2023): 157755. http://dx.doi.org/10.1016/j.apsusc.2023.157755.
    10.1016/j.apsusc.2023.157755
  4. Sousa, Luís; Antunes, Rui D.M.; Fernandes, JCS; Alves, Alexandra C.; Toptan, Fatih. "Influence of Al2O3 reinforcements and Ti-Al intermetallics on corrosion and tribocorrosion behavior of titanium". Surface and Coatings Technology 470 (2023): 129835. http://dx.doi.org/10.1016/j.surfcoat.2023.129835.
    10.1016/j.surfcoat.2023.129835
  5. Rocha, Letícia Oliveira; Camarinha, Maria Gabriela Galvão; Martins, Gislene Valdete; Çaha, Ihsan; Alves, Alexandra; Takahashi, Renata Jesuina; Toptan, Fatih; Reis, Danieli Aparecida Pereira. "Corrosion and tribocorrosion behavior of plasma nitrided AA7075 - T651". Tecnologia em Metalurgia, Materiais e Mineração 20 (2023): e2866. http://dx.doi.org/10.4322/2176-1523.20232866.
    Publicado • 10.4322/2176-1523.20232866
  6. Caha, Ihsan; Alves, Alexandra C.; Chirico, Caterina; Pinto, Ana Maria; Tsipas, Sophia; Gordo, Elena; Bondarchuk, Oleksandr; Deepak, Francis Leonard; Toptan, Fatih. "Atomic-scale investigations of passive film formation on Ti-Nb alloys". Applied Surface Science (2023): https://publons.com/wos-op/publon/60220284/.
    10.1016/J.APSUSC.2022.156282
  7. Pontes, Joana R.; Toptan, Fatih; Pinto, Ana M. P.; Ariza, Edith; Alves, Alexandra C.. "Influence of processing method of CoCrMo dental alloy on the corrosion behavior in artificial saliva". Materials and Corrosion 74 4 (2022): 576-584. http://dx.doi.org/10.1002/maco.202213562.
    10.1002/maco.202213562
  8. Gonçalves, Vinícius Richieri Manso; Çaha, Ihsan; Alves, Alexandra Cruz; Toptan, Fatih; Rocha, Luís Augusto. "Improved Tribocorrosion Behavior Obtained by In-Situ Precipitation of Ti2C in Ti-Nb Alloy". Metals 12 6 (2022): 908. http://dx.doi.org/10.3390/met12060908.
    10.3390/met12060908
  9. Çaha, Ihsan; Alves, Alexandra C.; Chirico, Caterina; Pinto, Ana Maria; Tsipas, Sophia; Gordo, Elena; Toptan, Fatih. "Tribocorrosion-Resistant Ti40Nb–TiN Composites Having TiO2-Based Nanotubular Surfaces". ACS Biomaterials Science & Engineering 8 5 (2022): 1816-1828. http://dx.doi.org/10.1021/acsbiomaterials.1c01446.
    10.1021/acsbiomaterials.1c01446
  10. Sousa, L.; Alves, A.C.; Costa, N.A.; Gemini-Piperni, S.; Rossi, A.L.; Ribeiro, A.R.; Simões, S.; Toptan, F.. "Preliminary tribo-electrochemical and biological responses of the Ti-TiB-TiCx in-situ composites intended for load-bearing biomedical implants". Journal of Alloys and Compounds 896 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120888579&partnerID=MN8TOARS.
    10.1016/j.jallcom.2021.162965
  11. Luís Sousa; Ana Rita Mendes; Ana Maria Pires Pinto; Fatih Toptan; Alexandra Cruz Alves. "Influence of Calcium Acetate Concentration in Electrolyte on Tribocorrosion Behaviour of MAO Treated Titanium". Metals (2021): https://doi.org/10.3390/met11121985.
    10.3390/met11121985
  12. N. A. Costa; A. L. Rossi; A. C. Alves; A. M. P. Pinto; F. Toptan; L. A. Rocha. "Growth Mechanisms and Tribocorrosion Behavior of Bio-Functionalized ZrO2 Nanoparticles-Containing MAO Coatings Formed on Ti-40Nb Alloy". Journal of Bio- and Tribo-Corrosion 7 2 (2021): https://doi.org/10.1007/s40735-021-00488-6.
    10.1007/s40735-021-00488-6
  13. Costa, A.I.; Viana, F.; Toptan, F.. "Preliminary tribocorrosion evaluation of bio-functionalized Ti doped with Ca-P-Sr". Materials Letters 283 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85092091467&partnerID=MN8TOARS.
    10.1016/j.matlet.2020.128775
  14. Çaha, I.; Alves, A.C.; Chirico, C.; Pinto, A.M.P.; Tsipas, S.; Gordo, E.; Toptan, F.. "A promising method to develop TiO2-based nanotubular surfaces on Ti-40Nb alloy with enhanced adhesion and improved tribocorrosion resistance". Applied Surface Science 542 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85097572608&partnerID=MN8TOARS.
    10.1016/j.apsusc.2020.148658
  15. Sousa, L.; Basilio, L.; Alves, A.C.; Toptan, F.. "Tribocorrosion-resistant biofunctionalized Ti-Al2O3 composites". Surface and Coatings Technology 420 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85107118376&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2021.127329
  16. MARINHO, C.; TOPTAN, F.; GUEDES, A.; ALVES, A.C.. "Electrochemical response of Ti joints vacuum brazed with TiCuNi, AgCu, and Ag fillers". Transactions of Nonferrous Metals Society of China (English Edition) 31 4 (2021): 999-1011. http://www.scopus.com/inward/record.url?eid=2-s2.0-85105261716&partnerID=MN8TOARS.
    10.1016/S1003-6326(21)65556-5
  17. Costa, A.I.; Viana, F.; Toptan, F.; Geringer, J.. "Highly porous Ti as a bone substitute: Triboelectrochemical characterization of highly porous Ti against Ti alloy under fretting-corrosion conditions". Corrosion Science 190 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85111220681&partnerID=MN8TOARS.
    10.1016/j.corsci.2021.109696
  18. Çaha, I.; Alves, A.C.; Affonço, L.J.; da Silva, J.H.D.; Rodrigues, I.R.; Grandini, C.R.; Rocha, L.A.; et al. "Degradation behaviour of Ti-12Nb alloy coated with ZnO/TiN double layer". Surface and Coatings Technology 413 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85103292661&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2021.127104
  19. Sousa, L.; Alves, A.C.; Guedes, A.; Toptan, F.. "Corrosion and tribocorrosion behaviour of Ti-B4C composites processed by conventional sintering and hot-pressing technique". Journal of Alloys and Compounds 885 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85110605172&partnerID=MN8TOARS.
    10.1016/j.jallcom.2021.161109
  20. Çaha, I.; Alves, A.C.; Chirico, C.; Pinto, A.M.; Tsipas, S.; Gordo, E.; Toptan, F.. "Improved tribocorrosion behavior on bio-functionalized ß-type titanium alloy by the pillar effect given by TiN reinforcements". Surface and Coatings Technology 415 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85103752558&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2021.127122
  21. Almeida, Tiago; Alves, Alexandra; Toptan, Fatih; Herrero, Mariano; Vaz, Paula; Sampaio-Fernandes, João. "Titanium implant surfaces characterization after different surface treatments". Clinical Oral Implants Research 31 S20 (2020): 145-145. http://dx.doi.org/10.1111/clr.87_13644.
    10.1111/clr.87_13644
  22. Fatih TOPTAN. "Corrosion and wear behaviour of highly porous Ti-TiB-TiNxin situ composites in simulated physiological solution". TURKISH JOURNAL OF CHEMISTRY (2020): https://doi.org/10.3906/kim-2001-40.
    10.3906/kim-2001-40
  23. Çaha, Ihsan; Alves, Alexandra; Chirico, Caterina; Pinto, Ana; Tsipas, Sophia; Gordo, Elena; Toptan, Fatih. "Corrosion and Tribocorrosion Behavior of Ti-40Nb and Ti-25Nb-5Fe Alloys Processed by Powder Metallurgy". Metallurgical and Materials Transactions A (2020): http://dx.doi.org/10.1007/s11661-020-05757-6.
    No prelo • 10.1007/s11661-020-05757-6
  24. Costa, A.I.; Sousa, L.; Alves, A.C.; Toptan, F.. "Tribocorrosion behaviour of bio-functionalized porous Ti surfaces obtained by two-step anodic treatment". Corrosion Science 166 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079880344&partnerID=MN8TOARS.
    10.1016/j.corsci.2020.108467
  25. Alves, A.C.; Costa, A.I.; Toptan, F.; Alves, J.L.; Leonor, I.; Ribeiro, E.; Reis, R.L.; Pinto, A.M.P.; Fernandes, J.C.S.. "Effect of bio-functional MAO layers on the electrochemical behaviour of highly porous Ti". Surface and Coatings Technology 386 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079651124&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2020.125487
  26. Çaha, I.; Alves, A.C.; Kuroda, P.A.B.; Grandini, C.R.; Pinto, A.M.P.; Rocha, L.A.; Toptan, F.. "Degradation behavior of Ti-Nb alloys: Corrosion behavior through 21 days of immersion and tribocorrosion behavior against alumina". Corrosion Science 167 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85078284499&partnerID=MN8TOARS.
    10.1016/j.corsci.2020.108488
  27. Costa, A.I.; Gemini-Piperni, S.; Alves, A.C.; Costa, N.A.; Checca, N.R.; Leite, P.E.; Rocha, L.A.; et al. "TiO2 bioactive implant surfaces doped with specific amount of Sr modulate mineralization". Materials Science and Engineering C (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85096444576&partnerID=MN8TOARS.
    10.1016/j.msec.2020.111735
  28. Çaha, I.; Alves, A.C.; Chirico, C.; Tsipas, S.A.; Rodrigues, I.R.; Pinto, A.M.P.; Grandini, C.R.; et al. "Interactions between wear and corrosion on cast and sintered Ti-12Nb alloy in comparison with the commercial Ti-6Al-4V alloy". Corrosion Science 176 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85089727744&partnerID=MN8TOARS.
    10.1016/j.corsci.2020.108925
  29. Rodrigues, S.A.; Alves, A.C.; Silva, F.S.; Barão, V.A.R.; Mesquita, M.F.; Rocha, L.A.; Toptan, F.. "Corrosion Behavior of Titanium Frameworks under Laser and Tungsten Inert Gas Weldings: Applications in Dentistry". Surface Engineering and Applied Electrochemistry 56 3 (2020): 358-364. http://www.scopus.com/inward/record.url?eid=2-s2.0-85087328609&partnerID=MN8TOARS.
    10.3103/S106837552003014X
  30. Çaha, I.; Alves, A.C.; Rocha, L.A.; Toptan, F.. "A Review on Bio-functionalization of ß-Ti Alloys". Journal of Bio- and Tribo-Corrosion 6 4 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85092343203&partnerID=MN8TOARS.
    10.1007/s40735-020-00432-0
  31. Fatih Toptan; Alexandra C. Alves; Óscar Carvalho; Flávio Bartolomeu; Ana M.P. Pinto; Filipe Silva; Georgina Miranda. "Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy". Journal of Materials Processing Technology 266 (2019): 239-245. https://doi.org/10.1016/j.jmatprotec.2018.11.008.
    10.1016/j.jmatprotec.2018.11.008
  32. Cristina Frazão; Belén Díaz; Joaquim Barros; J. Alexandre Bogas; Fatih Toptan. "An experimental study on the corrosion susceptibility of Recycled Steel Fiber Reinforced Concrete". Cement and Concrete Composites 96 (2019): 138-153. https://doi.org/10.1016/j.cemconcomp.2018.11.011.
    10.1016/j.cemconcomp.2018.11.011
  33. Oliveira, A.F.F.; Toptan, F.. "Wear Behavior of Ti-Al2O3 Biocomposites in 9 g/L NaCl Solution". Journal of Materials Engineering and Performance 28 10 (2019): 6000-6010. http://www.scopus.com/inward/record.url?eid=2-s2.0-85073977686&partnerID=MN8TOARS.
    10.1007/s11665-019-04352-0
  34. COSTA, M.M.; DANTAS, T.A.; BARTOLOMEU, F.; ALVES, N.; SILVA, F.S.; MIRANDA, G.; TOPTAN, F.. "Corrosion behaviour of PEEK or ß-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications". Transactions of Nonferrous Metals Society of China (English Edition) 29 12 (2019): 2523-2533. http://www.scopus.com/inward/record.url?eid=2-s2.0-85077038282&partnerID=MN8TOARS.
    10.1016/S1003-6326(19)65160-5
  35. Sousa, J.M.; Alves, A.C.; Toptan, F.; Ariza, E.; Guedes, A.. "Corrosion and Tribocorrosion Behavior of Ti-B4C Composites Joined with TiCuNi Brazing Alloy". Journal of Materials Engineering and Performance 28 8 (2019): 4972-4982. http://www.scopus.com/inward/record.url?eid=2-s2.0-85070733514&partnerID=MN8TOARS.
    10.1007/s11665-019-04217-6
  36. Alves, A.C.; Thibeaux, R.; Toptan, F.; Pinto, A.M.P.; Ponthiaux, P.; David, B.. "Influence of macroporosity on NIH/3T3 adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 over bio-functionalized highly porous titanium implant material". Journal of Biomedical Materials Research - Part B Applied Biomaterials 107 1 (2019): 73-85. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043380945&partnerID=MN8TOARS.
    10.1002/jbm.b.34096
  37. Çaha, I.; Alves, A.C.; Affonço, L.J.; Lisboa-Filho, P.N.; da Silva, J.H.D.; Rocha, L.A.; Pinto, A.M.P.; Toptan, F.. "Corrosion and tribocorrosion behaviour of titanium nitride thin films grown on titanium under different deposition times". Surface and Coatings Technology 374 (2019): 878-888. http://www.scopus.com/inward/record.url?eid=2-s2.0-85068111019&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2019.06.073
  38. Chirico, C.; Tsipas, S.; Toptan, F.; Gordo, E.. "Development of Ti–Nb and Ti–Nb–Fe beta alloys from TiH 2 powders". Powder Metallurgy 62 1 (2019): 44-53. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059690544&partnerID=MN8TOARS.
    10.1080/00325899.2018.1563953
  39. Costa, B.C.; Alves, A.C.; Toptan, F.; Pinto, A.M.; Grenho, L.; Fernandes, M.H.; Petrovykh, D.Y.; Rocha, L.A.; Lisboa-Filho, P.N.. "Exposure effects of endotoxin-free titanium-based wear particles to human osteoblasts". Journal of the Mechanical Behavior of Biomedical Materials 95 (2019): 143-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064198160&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2019.04.003
  40. Fatih Toptan; Alexandra C. Alves; Margarida A. Ferreira; Catarina I. da Silva Oliveira; Ana M.P. Pinto. "Effect of HAP decomposition on the corrosion behavior of Ti-HAP biocomposites". Materials and Corrosion 69 9 (2018): 1292-1299. https://doi.org/10.1002/maco.201810049.
    10.1002/maco.201810049
  41. J. Ureña; S. Tsipas; A.M. Pinto; F. Toptan; E. Gordo; A. Jiménez-Morales. "Corrosion and tribocorrosion behaviour of ß-type Ti-Nb and Ti-Mo surfaces designed by diffusion treatments for biomedical applications". Corrosion Science 140 (2018): 51-60. https://doi.org/10.1016/j.corsci.2018.06.024.
    10.1016/j.corsci.2018.06.024
  42. Alves, S.A.; Rossi, A.L.; Ribeiro, A.R.; Toptan, F.; Pinto, A.M.; Shokuhfar, T.; Celis, J.-P.; Rocha, L.A.. "Improved tribocorrosion performance of bio-functionalized TiO 2 nanotubes under two-cycle sliding actions in artificial saliva". Journal of the Mechanical Behavior of Biomedical Materials 80 (2018): 143-154. http://www.scopus.com/inward/record.url?eid=2-s2.0-85041484458&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2018.01.038
  43. Boztepe, E.; Alves, A.C.; Ariza, E.; Rocha, L.A.; Cansever, N.; Toptan, F.. "A comparative investigation of the corrosion and tribocorrosion behaviour of nitrocarburized, gas nitrided, fluidized-bed nitrided, and plasma nitrided plastic mould steel". Surface and Coatings Technology 334 (2018): 116-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-85034414205&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2017.11.033
  44. N.R. Rodrigues; A.C. Alves; F. Toptan; L.A. Rocha. "Preliminary investigation on the tribocorrosion behaviour of nanotubular structured Ti6Al4V surfaces". Materials Letters (2017): https://doi.org/10.1016/j.matlet.2017.11.067.
    10.1016/j.matlet.2017.11.067
  45. Moraes, M.R.; Alves, A.C.; Toptan, F.; Martins, M.S.; Vieira, E.M.F.; Paleo, A.J.; Souto, A.P.; et al. "Glycerol/PEDOT:PSS coated woven fabric as a flexible heating element on textiles". Journal of Materials Chemistry C 5 15 (2017): 3807-3822. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017660554&partnerID=MN8TOARS.
    10.1039/C7TC00486A
  46. Silva, J.I.; Alves, A.C.; Pinto, A.M.; Toptan, F.. "Corrosion and tribocorrosion behavior of Ti-TiB-TiNx in-situ hybrid composite synthesized by reactive hot pressing". Journal of the Mechanical Behavior of Biomedical Materials 74 (2017): 195-203. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020404329&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2017.05.041
  47. Alves, S.A.; Rossi, A.L.; Ribeiro, A.R.; Toptan, F.; Pinto, A.M.; Celis, J.-P.; Shokuhfar, T.; Rocha, L.A.. "Tribo-electrochemical behavior of bio-functionalized TiO2 nanotubes in artificial saliva: Understanding of degradation mechanisms". Wear 384-385 (2017): 28-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019445095&partnerID=MN8TOARS.
    10.1016/j.wear.2017.05.005
  48. Toptan, F.; Alves, A.C.; Pinto, A.M.P.; Ponthiaux, P.. "Tribocorrosion behavior of bio-functionalized highly porous titanium". Journal of the Mechanical Behavior of Biomedical Materials 69 (2017): 144-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008670855&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2017.01.006
  49. Toptan, F.; Rego, A.; Alves, A.C.; Guedes, A.. "Corrosion and tribocorrosion behavior of Ti-B4C composite intended for orthopaedic implants". Journal of the Mechanical Behavior of Biomedical Materials 61 (2016): 152-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957582616&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2016.01.024
  50. Silva, J.I.; Alves, A.C.; Pinto, A.M.; Silva, F.S.; Toptan, F.. "Dry sliding wear behaviour of Ti-TiB-TiNx in-situ composite synthesised by reactive hot pressing". International Journal of Surface Science and Engineering 10 4 (2016): 317-329. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978370282&partnerID=MN8TOARS.
    10.1504/IJSURFSE.2016.077533
  51. Alves, A.C.; Sendão, I.; Ariza, E.; Toptan, F.; Ponthiaux, P.; Pinto, A.M.P.. "Corrosion behaviour of porous Ti intended for biomedical applications". Journal of Porous Materials 23 5 (2016): 1261-1268. http://www.scopus.com/inward/record.url?eid=2-s2.0-84964304796&partnerID=MN8TOARS.
    10.1007/s10934-016-0185-0
  52. Pontes, J.R.; Alves, A.C.; Toptan, F.; Galo, R.; Ariza, E.. "Effect of commercial mouthwashes on the corrosion and tribocorrosion behaviour of a Co-Cr dental casting alloy". Materials and Corrosion 67 3 (2016): 305-311. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959541718&partnerID=MN8TOARS.
    10.1002/maco.201508396
  53. Tuan, N.Q.; Alves, A.C.; Toptan, F.; Lopes, A.B.; Pinto, A.M.P.. "The effect of Sc and Yb microalloying additions and aged-hardening heat treatment on corrosion behavior of Al-Mg alloys". Materials and Corrosion 67 1 (2016): 60-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84955340008&partnerID=MN8TOARS.
    10.1002/maco.201508404
  54. Correa, D.R.N.; Kuroda, P.A.B.; Grandini, C.R.; Rocha, L.A.; Oliveira, F.G.M.; Alves, A.C.; Toptan, F.. "Tribocorrosion behavior of ß-type Ti-15Zr-based alloys". Materials Letters 179 (2016): 118-121. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008616026&partnerID=MN8TOARS.
    10.1016/j.matlet.2016.05.045
  55. Boztepe, E.; Alves, A.C.; Ramalho, A.; Ariza, E.; Rocha, L.A.; Cansever, N.; Toptan, F.. "A comparative study on the dry sliding wear behaviour of nitrocarburised, gas nitrided, fluidised-bed nitrided, and plasma nitrided plastic mould steel". International Journal of Surface Science and Engineering 10 5 (2016): 468-484. http://www.scopus.com/inward/record.url?eid=2-s2.0-84987761341&partnerID=MN8TOARS.
    10.1504/IJSURFSE.2016.079044
  56. Sendão, I.A.; Alves, A.C.; Galo, R.; Toptan, F.; Silva, F.S.; Ariza, E.. "The effect of thermal cycling on the shear bond strength of porcelain/Ti-6Al-4V interfaces". Journal of the Mechanical Behavior of Biomedical Materials 44 (2015): 156-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921924553&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2015.01.004
  57. Ribeiro, A.M.; Alves, A.C.; Rocha, L.A.; Silva, F.S.; Toptan, F.. "Synergism between corrosion and wear on CoCrMo-Al2O3 biocomposites in a physiological solution". Tribology International 91 (2015): 198-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-84923872739&partnerID=MN8TOARS.
    10.1016/j.triboint.2015.01.018
  58. Ribeiro, A.M.; Alves, A.C.; Silva, F.S.; Toptan, F.. "Electrochemical characterization of hot pressed CoCrMo-HAP biocomposite in a physiological solution". Materials and Corrosion 66 8 (2015): 790-795. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938523568&partnerID=MN8TOARS.
    10.1002/maco.201407885
  59. Toptan, Fatih. "Tribocorrosion behaviour of hot pressed CoCrMo-HAP biocomposites". Tribology International (2015):
    10.1016/j.triboint.2015.04.009
  60. Toptan, Fatih. "Effects of substituting ytterbium for scandium on corrosion behaviour of Al–Sc alloy". Materials and Corrosion (2015):
    10.1002/maco.201508360
  61. Toptan, Fatih. "Microstructural Characterization of Biofunctionalized Titanium Foams". Microscopy and Microanalysis (2015):
    10.1017/S1431927615014087
  62. Toptan, Fatih. "Microstructure of Discontinuously B4C Reinforced Ti Metal Matrix Composites Processed by Hot-Pressing". Microscopy and Microanalysis (2015):
    10.1017/S1431927615014014
  63. Doni, Z.; Alves, A.C.; Toptan, F.; Pinto, A.M.; Rocha, L.A.; Buciumeanu, M.; Palaghian, L.; Silva, F.S.. "Tribocorrosion behaviour of hot pressed CoCrMo–Al2O3 composites for biomedical applications". Tribology - Materials, Surfaces and Interfaces 8 4 (2014): 201-208. http://www.scopus.com/inward/record.url?eid=2-s2.0-84918551753&partnerID=MN8TOARS.
    10.1179/1751584X14Y.0000000078
  64. Toptan, Fatih. "Oxidation of Boron Carbide Particles at Low Temperatures". Materials Letters (2014):
    10.1016/j.matlet.2014.04.138
  65. Doni, Z.; Alves, A. C.; Toptan, F.; Gomes, J. R.; Ramalho, A.; Buciumeanu, M.; Palaghian, L.; Silva, F. S.. "Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys". Materials & Design 52 (2013): 47-57.
    10.1016/j.matdes.2013.05.032
  66. Toptan, F.; Alves, A.C.; Henriques, B.; Souza, J.C.M.; Coelho, R.; Silva, F.S.; Rocha, L.A.; Ariza, E.. "Influence of the processing route of porcelain/Ti-6Al-4V interfaces on shear bond strength". Journal of the Mechanical Behavior of Biomedical Materials 20 (2013): 327-337. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875871869&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2013.02.003
  67. Toptan, F.; Alves, A.C.; Kerti, I.; Ariza, E.; Rocha, L.A.. "Corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites reinforced with B4C particles in 0.05M NaCl solution". Wear 306 1-2 (2013): 27-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880683109&partnerID=MN8TOARS.
    10.1016/j.wear.2013.06.026
  68. Toptan, F.; Kerti, I.; Rocha, L. A.. "Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites". Wear 290 (2012): 74-85.
    10.1016/j.wear.2012.05.007
  69. Kilicarslan, A.; Toptan, F.; Kerti, I.. "Electroless nickel-phosphorus coating on boron carbide particles". Materials Letters 76 (2012): 11-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84857670826&partnerID=MN8TOARS.
    10.1016/j.matlet.2012.02.037
  70. Toptan, F.; Kilicarslan, A.; Kerti, I.; Rosa, LG; Margarido, F. "The Effect of Ti Addition on the Properties of Al-B(4)C Interface: A Microstructural Study". Advanced Materials Forum V, Pt 1 and 2 636-637 (2010): 192-197.
    10.4028/www.scientific.net/MSF.636-637.192
  71. Toptan, F.; Kilicarslan, A.; Karaaslan, A.; Cigdem, M.; Kerti, I.. "Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites". Materials and Design 31 SUPPL. 1 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77953812033&partnerID=MN8TOARS.
    10.1016/j.matdes.2009.11.064
  72. Gezer, B.T.; Toptan, F.; Daglilar, S.; Kerti, I.. "Production of Al-Ti-C grain refiners with the addition of elemental carbon". Materials and Design 31 SUPPL. 1 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77953807220&partnerID=MN8TOARS.
    10.1016/j.matdes.2009.09.002
  73. A. Kiliçarslan; Toptan, Fatih; I. Kerti. "Electroless Nickel Coating Method and Application of Ceramic Particulates (In Turkish)". Metalurji 154 (2010): 33-37.
    Publicado
  74. Kerti, I.; Toptan, F.. "Microstructural variations in cast B4C-reinforced aluminium matrix composites (AMCs)". Materials Letters 62 8-9 (2008): 1215-1218. http://www.scopus.com/inward/record.url?eid=2-s2.0-38149068940&partnerID=MN8TOARS.
    10.1016/j.matlet.2007.08.015
  75. Toptan, Fatih; F. Kumdali; I. Kerti. "Al-B4C Composites as a Brake Disc Material – An Overview (In Turkish)". Metalurji 145 (2006): 11-18.
    Publicado
Capítulo de livro
  1. "Bio-Functionalized Porous Ti". {CRC, 2021.
    10.1201/9781003096443
Livro
  1. Toptan, F.; Rocha, L.A.; Toptan, Fatih. Tribocorrosion in metal matrix composites. 2017.
    10.4018/978-1-5225-1798-6.ch032
  2. Gordo, E.; Das Neves, R.G.; Ferrari, B.; Jimenez-Morales, A.; Lima, A.; Alves, A.C.; Pinto, A.M.; Toptan, F.. Corrosion and tribocorrosion behavior of Ti-Alumina composites. 2016.
    10.4028/www.scientific.net/KEM.704.28
  3. Toptan, F.; Kerti, I.; Daglilar, S.; agin, A.S.; Karadeniz, O.F.; Ambarkutuk, A.. Production of Al-Ti-C Grain Refiners with the Addition of Elemental Carbon and K2TiF6. 2011.
    10.1002/9781118061992.ch141
  4. Toptan, F.; Kerti, I.; Sagin, A.; Cigdem, M.; Daglilar, S.; Yuksel, F.. Microstructural Properties and Wear Behaviour of AlSi9Mg Matrix B4Cp Reinforced Composites. 2011.
    10.1002/9781118062142.ch101
Poster em conferência
  1. Burak Küçükelyas; Cantekin Kaykilarli; çaha, ihsan; Alves, Alexandra C.; Toptan, Fatih; Sebahattin Gürmen; Deniz Uzunsoy. "Comparison Of Microstructure And Mechanical Properties Of CoCrFeNiMn High-Entropy Alloys By Uniaxially Pressing sintering And Vacuum Hot Pressing-Sintering Methods". Trabalho apresentado em IMMC’2022 International Metallurgy & Materials Congress, 2022.
  2. C. Melo; A. Guedes; C.J. Tavares; Toptan, Fatih; S. Simões. "Characterization of Ti6Al4V to Ti-B4C composite joints brazed with Ti foil coated with Ag and Cu sputtered layers". Trabalho apresentado em EUROMAT 2019, 1-5 September 2019, Stockholm, Sweden., 2019.
  3. A.C. Alves; A.I. Costa; Toptan, Fatih; A.M. Pinto; J.C. Fernandes; R. Thibeaux; B. David; et al. "Corrosion, tribocorrosion and biological response of bio-functionalized highly porous titanium intended for biomedical applications". Trabalho apresentado em 4th International Conference on BioTribology (ICoBT 2018), 2018.
  4. B. Costa; C. Xavier; N. Costa; A. Alves; P. Lisboa-Filho; Toptan, Fatih; A.M. Pinto; L. Rocha. "Influence of heat treatment and surface modification on the tribocorrosion behavior of new beta titanium alloys designed for medical implants: the case of Ti-15Zr-15Mo". Trabalho apresentado em 43rd international Conference on Micro and Nanoengineering, MNE2017, 2017.
  5. J.M. Sousa; A.C. Alves; Toptan, Fatih; E. Ariza; A. Guedes. "Corrosion and tribocorrosion behaviour of Ti-B4C composites joined by brazing". Trabalho apresentado em 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices, Universidade do Minho, Guimarães, 22 June 2017., 2017.
  6. E.R. Santos; A.C. Alves; Toptan, Fatih; A.M.P. Pinto. "Processing titanium foams obtained by powder metallurgy for biomedical applications". Trabalho apresentado em 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices, Universidade do Minho, Guimarães, 22 June 2017., 2017.
  7. L. Sousa; Toptan, Fatih; A.C. Alves; A. Guedes. "Effect of reinforcement content on wear and corrosion resistance of Ti-B4C composites obtained by sintering". Trabalho apresentado em 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices, Universidade do Minho, Guimarães, 22 June 2017., 2017.
  8. A.I. Costa; A.C. Alves; Toptan, Fatih; A.M.P. Pinto. "Surface Modification of Titanium Foams for Biomedical Applications". Trabalho apresentado em 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices, Universidade do Minho, Campus de Azurém, in Guimarães, 22 June 2017., 2017.
  9. P. Corrêa; N.F.A. Neto; C.A.F. Pintão; A.M. Pinto; Toptan, Fatih; J.H.D da Silva; L.A. Rocha. "Preliminary study of surface modification of commercial titanium by deposition of TiO2 thin films and the sputtering technique: applications as biomaterials". Trabalho apresentado em XIV Brazil MRS Meeting, 2015.
  10. D.R.N. Correa; P.A.B. Kuroda; C.R. Grandini; F. Oliveira; A.C. Alves; Toptan, Fatih; L.A. Rocha. "Tribocorrosion behaviour of biomedical ß-type Ti-15Zr-based alloys". Trabalho apresentado em XIV Brazil MRS Meeting, 2015.
  11. E. Gordo; R.G. das Neves; B. Ferrari; A. Jimenez-Morales; A. Alves; A.M. Pinto; Toptan, Fatih. "Corrosion and tribocorrosion behavior of Ti-alumina composites". Trabalho apresentado em PM Titanium 2015, Lüneburg, Germany., 2015.
    10.4028/www.scientific.net/KEM.704.28
  12. Toptan, Fatih; F. Yuksel; I. Kerti. "Production and Characterization of AlSi9Mg Matrix B4C Particulate Reinforced Composites". Trabalho apresentado em 11th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, 26-29 September 2010, Guimarães, Portugal., 2010.
  13. Toptan, Fatih; I. Kerti. "Microstructural Charactarisation of Al-B4C Interface". Trabalho apresentado em Seres'09, I. International Ceramic, Glass, Porcelain, Enamel, Glaze and pigment Congress, 12-14 October 2009, Eskisehir, Turkey., 2009.
  14. A. Kiliçarslan; Toptan, Fatih; I. Kerti. "Oxidation of Boron Carbide Powder". Trabalho apresentado em 12th International Materials Symposium (IMSP’2008), October 15-17, 2008, Denizli, Turkey., 2008.
  15. F. Kumdali; Toptan, Fatih; I. Kerti. "Effect of Pressing and Sintering Conditions on Microstructure and Properties of P/M Al-B4C Composites". Trabalho apresentado em 13th International Metallurgy & Materials Congress, 9-11 November 2006., 2006.
Resumo em conferência
  1. V.R.M Gonçalves; çaha, ihsan; Alves, A.C.; Toptan, Fatih; Luís Augusto Rocha. "Corrosion and tribocorrosion mechanisms of novel Ti-Nb-based matrix composites for biomedical applications". Trabalho apresentado em EUROCORR21, 2021.
  2. çaha, ihsan; Alves, A.C.; Affonço, L.J.; Lisboa-Filho, P.N.; da Silva, J.H.D.; Rocha, L.A.; Pinto, A.M.P.; Toptan, Fatih. "Corrosion and tribocorrosion behavior of TiN coating film on Ti-Nb alloys for biomedical implant applications". Trabalho apresentado em EUROCORR 2019, sevilla, 2019.
  3. çaha, ihsan; Alves, A.C.; Chirico, C.; Pinto, A.M.P.; Tsipas, S.A.; Gordo, E.; Toptan, F.. "Corrosion and tribocorrosion behavior of anodic treated Ti-Nb and Ti-Nb-Fe alloys for biomedical implant applications". Trabalho apresentado em EUROCORR 2019, 2019.
  4. çaha, ihsan; Chirico, C.; Alves, A.C.; Affonço, L.J.; Lisboa-Filho, P.N.; da Silva, J.H.D.; Rocha, L.A.; et al. "Corrosion and tribocorrosion behavior of Ti-Nb based alloys". Trabalho apresentado em DCE2019, Porto, 2019.
  5. çaha, ihsan; Alves, A.C.; Chirico, C.; A.M.P. Pinto; Tsipas, S.A.; Gordo, E.; Toptan, F.. "Morphological variations on the nanotubular layers grown on Ti-Nb alloys". Trabalho apresentado em Materials2019, Lisbon, 2019.
Tese / Dissertação
  1. Toptan, Fatih. "Production of high wear resistant B4C particle reinforced aluminium matrix composites (In Turkish)". Doutoramento, Yildiz Teknik Üniversitesi, 2011.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2019/09/11 Corrosion and tribocorrosion behavior of TiN coating film on Ti-Nb alloys for biomedical implant applications EUROCORR 2019
(Seville, Espanha)
2019/09/10 Corrosion and tribocorrosion behavior of anodic treated Ti-Nb and Ti-Nb-Fe alloys for biomedical implant applications EUROCORR 2019
(Seville, Espanha)
2019/09/10 Tribocorrosion behavior of bio-functionalized in-situ Ti-TiB-TiC composites by anodic treatment EUROCORR 2019
(Seville, Espanha)
2019/09 Tribocorrosion evaluation of TiO2 bioactive surfaces doped with Sr intended for orthopaedic applications EUROCORR 2019
(Seville, Espanha)
2019/06 Corrosion and tribocorrosion behavior of Ti-Nb based alloys 3rd Doctoral Congress in Engineering
(Porto, Portugal)
2019/06 Diffusion brazing Ti6Al4V to Ti-B4C composite using different Ti-based fillers 3rd Doctoral Congress in Engineering
(Porto, Portugal)
2019/06 Tribocorrosion behavior of bio-functionalized Ti-Al2O3 composites 3rd Doctoral Congress in Engineering
(Porto, Portugal)
2019/04 TiO2 bioactive surfaces doped with Sr intended for orthopaedic applications X International Symposium on Materials (MATERIAIS 2019)
(Lisbon, Portugal)
2019/04 Corrosion and tribocorrosion behavior of Ti-Al2O3 composites processed by powder metallurgy X International Symposium on Materials (MATERIAIS 2019)
(Lisbon, Portugal)
2019/04 Morphological variations on the nanotubular layers grown on Ti-Nb alloys X International Symposium on Materials (MATERIAIS 2019)
(Lisbon, Portugal)
2018/10 Development of Ti-Nb and Ti-Nb-Fe beta alloys from TiH2 powders Euro PM2018 Congress & Exhibition
(Bilbao, Espanha)
2018/09 Exposure effects of titanium implants’ wear products to bone tissue cells XVII Brazilian MRS meeting (SBPMat)
(Natal, Brasil)
2018/06/06 Routes to bio-functionalize ß-Ti alloys 7th IBTN Research Symposium on Advancements in Functionalized Biomaterials
(Guimarães, Portugal)
2018/06/06 Effect of macro-porosity on electrochemical behaviour of bio-functionalized highly porous Ti 7th IBTN Research Symposium on Advancements in Functionalized Biomaterials
(Guimarães, Portugal)
2018/06/06 Tribocorrosion behaviour of bio-functionalized porous Ti surfaces obtained by a two-step anodic treatment 7th IBTN Research Symposium on Advancements in Functionalized Biomaterials
(Guimarães, Portugal)
2018/06/06 Corrosion resistance of a Ti-15Zr-15Mo alloy functionalized by particle-containing micro-arc oxidation 7th IBTN Research Symposium on Advancements in Functionalized Biomaterials
(Guimarães, Portugal)
2018/06/06 Corrosion and tribocorrosion behaviour of titanium nitride thin films grown on titanium under different deposition times 7th IBTN Research Symposium on Advancements in Functionalized Biomaterials
(Guimarães, Portugal)
2017/06/22 Tribocorrosion-resistant composite and highly porous surfaces for biomedical applications 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices
(Guimarães, Portugal)
2017/06/22 Biological response of biofunctionalized highly porous Ti 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices
(Guimarães, Portugal)
2017/06 Strategies for improvement the wear and tribocorrosion behaviour of titanium alloys IBERTRIB 2017 – IX Iberian Conference on Tribology
(Guimarães, Portugal)
2017/06 Brazing of Ti6Al4V to B4C Reinforced Ti Metal Matrix Composite 2nd Doctoral Congress in Engineering
(Porto, Portugal)
2016/10 Design and Evaluation of PM Ti Surfaces Modified by Colloidal Techniques and Diffusion Processes for Biomedical Applications Powder Metallurgy World Congress, WorldPM 2016
(Hamburg, Alemanha)
2016/08/27 Tribocorrosion behaviour of composite and bio-functionalized porous surfaces for biomedical implant applications 9th Latin American Congress on Artificial Organs and Biomaterials, COLAOB
(Foz do Iguaçu, Brasil)
2015/09/25 Metal matrix composites for biomedical applications 2nd IBTN day
(Rio de Janeiro, Brasil)
2015/09 Tribocorrosion resistant dense and porous surfaces for biomedical applications XIV Brazil MRS Meeting
(Rio de Janeiro, Brasil)
2015/09 Tribocorrosion behaviour of Ti-TiB-TiNx in-situ hybrid composite XIV Brazil MRS Meeting
(Rio de Janeiro, Brasil)
2015/09 Corrosion and tribocorrosion behavior of Ti-alumina composites The 3rd Conference on Powder Processing, Consolidation and Metallurgy of Titanium
(Lüneburg, Alemanha)
2015/09 Biofunctionalization of porous titanium, PM Titanium 2015, The 3rd Conference on Powder Processing The 3rd Conference on Powder Processing, Consolidation and Metallurgy of Titanium
(Lüneburg, Alemanha)
2015/09 Corrosion behavior of welded structures by laser and TIG Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica
(Campinas, Brasil)
2015/09 The mechanical behavior of welded structures by laser and TIG Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica
(Campinas, Brasil)
2014/11 Microstructure of Discontinuously B4C Reinforced Ti Metal Matrix Composites Processed by Hot-Pressing INCOMAM'14 - International Conference on Microscopy and Microanalysis, XLVIII Congress of the Portuguese Microscopy Society
(Porto, Portugal)
2014/11 Microstructural characterization of biofunctionalized titanium foams INCOMAM'14 - International Conference on Microscopy and Microanalysis, XLVIII Congress of the Portuguese Microscopy Society
(Porto, Portugal)
2014/04 Corrosion and tribocorrosion behaviour of hot-pressed CoCrMo-Al2O3 composites for acetabular cup applications Tribocorrosion 2014 symposium
(Glasgow, Reino Unido)
2014/04 Corrosion and tribocorrosion behaviour of hot-pressed CoCrMo-HAP biocomposites Tribocorrosion 2014 symposium
(Glasgow, Reino Unido)
2013/03 The effect of alumina particle geometry on wear resistance of hot pressed CoCrMo-Al2O3 composites Materiais 2013
(Coimbra, Portugal)
2013/03 Corrosion and tribocorrosion behavior of hot pressed CoCrMo-Al2O3 biocomposites Materiais 2013
(Coimbra, Portugal)
2011/10 Production and Characterisation of AA2024-B4Cp Composites 5th Aluminium Symposium (ALUS’05)
(Istanbul, Turquia)
2011 Microstructural properties and wear behaviour of AlSi9Mg matrix B4Cp reinforced composites TMS 2011 Annual Meeting & Exhibition
(San Diego, Estados Unidos)
2011 Effect of particle size particle surface modification pressing pressure and sintering temperature on microstructure and mechanical properties P/M Al-B4C composites TMS 2011 Annual Meeting & Exhibition
(San Diego, Estados Unidos)
2011 Production of Al-Ti-C Grain Refiners with the Addition of Elemental Carbon and K2TiF6 TMS 2011 Annual Meeting & Exhibition
(San Diego, Estados Unidos)
2010/11 The Effect of Ti Addition on the Wettability and Particle Addition Yield in AlSi9Mg-B4Cp Composites 15th International Metallurgy & Materials Congress
(Istanbul, Turquia)
2009/10 Modification of Surface Properties of Boron Carbide (B4C) Particles via Electroless Nickel Coating Technique IV International Boron Symposium
(Eskisehir, Turquia)
2009/10 Production and Characterization of Al-B4Cp Composites by Powder Metallurgy Method IV International Boron Symposium
(Eskisehir, Turquia)
2009/06 Microstructural Characterization of Matrix/Reinforcement Interfaces in Al-B4C Composites Produced by Ti Addition 19th National Electron Microscopy Congress with International Participation
(Trabzon, Turquia)
2009/06 Microstructural Characterization of Electroless Nickel Plated B4C Particles 19th National Electron Microscopy Congress with International Participation
(Trabzon, Turquia)
2009/05 Microstructural Characterisation of Matrix/Reinforcement Interface in Al-B4C Composites Produced with Ti Addition 5th International Advanced Technologies Symposium (IATS'09)
(Karabük, Turquia)
2009/04 The effect of Ti addition on the properties of Al-B4C interface: A microstructural study The V International Materials Symposium, MATERIAIS 2009
(Lisbon, Portugal)
2009 Processing and microstructural charactarisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites 5th International Conference on Materials for Advanced Technologies (ICMAT2009)
(Singapore, Singapura)
2009 Production of Al-Ti-C Grain Refiners with the Addition of Elemental Carbon 5th International Conference on Materials for Advanced Technologies (ICMAT2009)
(Singapore, Singapura)
2006/11 Microstructural and Wear Behaviour Investigations of Cast Al-B4C MMCs 3rd International Boron Symposium
(Ankara, Turquia)

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2021 - Atual Recycling of critical metals from hard disk drives
Orientador
 Materials Science and Engineering (Doutoramento)
Izmir Yüksek Teknoloji Enstitüsü, Turquia
2019 - Atual Tribological study of metal attachments used on an Ackerman bar
Coorientador
 Doctoral Programme in Dental Medicine (Doutoramento)
Universidade do Porto, Portugal
2017 - 2022/02/18 Development of multifunctionalized tribocorrosion-resistant bio-FGMs
Coorientador
 PhD Program in Advanced Materials and Processing (AdvaMTech) (Doutoramento)
Universidade do Porto, Portugal
2018 - 2021/10 Microstructure and mechanical behaviour of Ti/Ti-Al2O3 metal matrix composite bonding obtained by brazing
Coorientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2017 - 2021 Development of bio-functionalized and tribocorrosion resistant hybrid surfaces on novel Ti-based alloys
Coorientador
 Biomedical Engineering Doctoral Program (Doutoramento)
Universidade do Minho, Portugal
2016 - 2021 TiO2 bioactive surfaces doped with Sr intended for orthopaedic applications
Coorientador
 PhD Program in Advanced Materials and Processing (AdvaMTech) (Doutoramento)
Universidade do Porto, Portugal
2017 - 2018 Development of functionally graded porous titanium surfaces on ß-titanium alloy
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2017 - 2018 Tribocorrosion behaviour of Ti-Al2O3 composites
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2017 - 2018 Synergism between corrosion and wear on hot-pressed Ti-B4C composites
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2015 - 2016 Evaluation of the effect of reinforcement content on wear and corrosion resistance of Ti-B4C composites obtained by sintering
Coorientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2014 - 2015 Tribological behaviour of titanium based biocomposites
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2014 - 2015 Mechanical properties of open-cellular porous titanium implant materials
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2012 - 2015 Comparison of Different Nitriding Methods on Surface Properties of 1.2738 Steel
Coorientador
 MSc on Materials Science (Mestrado)
Yildiz Teknik Üniversitesi, Turquia
2013 - 2014 Tribocorrosion behaviour of in-situ Ti-TiB-TiNx hybrid composites
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2012 - 2013 Development of CoCrMo based FGM implants
Orientador
 Integrated Master on Materials Engineering (Mestrado)
Universidade do Minho, Portugal
2011 - 2012 Production of magnesium matrix B4C reinforced composite materials
Coorientador
 MSc on Materials Science (Mestrado)
Yildiz Teknik Üniversitesi, Turquia

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2022/01/28 - Atual 9th IBTN Research Symposium on Past and future of testing tribocorrosion in biomaterials (2022/01/28) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2019 - Atual VII Spanish Congress of Powder Metallurgy and the II Ibero-American Conference on Powder Metallurgy, in Madrid, Spain (2019/06/24 - 2019/06/26)
Congresso (Membro da Comissão Científica)
2011 - Atual VI International Materials Symposium, MATERIAIS 2011, in Guimarães, Portugal (2011/04/18 - 2011/04/20)
Simpósio (Membro da Comissão Organizadora)
 Universidade do Minho, Portugal
2018/07/06 - 2018/07/06 7th IBTN Research Symposium on Advancements in Functionalized Biomaterials (2018/07/06 - 2018/07/06)
Simpósio (Presidente da Comissão Organizadora)
 Universidade do Minho, Portugal
2017/06/22 - 2017/06/22 5th IBTN Research Symposium on New Frontiers in Biomaterials and Degradation Phenomena in Medical Devices (2017/06/22 - 2017/06/22)
Simpósio (Presidente da Comissão Organizadora)
 Universidade do Minho, Portugal

Júri de grau académico

Tema
Tipo de participação 		Nome do candidato (Tipo de grau)
Instituição / Organização
2021/12/13 Preparation of drug loaded albumin nanoparticles in water / ionic liquids microemulsion systems
Arguente
 Baris Yildirim (Mestrado)
Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/12/07 Investigation of mechanical and tribological behaviour of graphene nanoplatelet reinforced ZE10 magnesium alloy
Arguente
 Sibel Yöyler (Mestrado)
Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/07/13 Comparison of powder synthesis methods for the production of potassium sodium niobate (KNN)
Arguente
 Cerem Piskin (Mestrado)
Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/07/13 Formation of SrTiO3[TiO2] ceramic composites at low temperatures
Arguente
 Esin Karatas (Mestrado)
Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/07/07 Optimization of organic phase pre-neutralisation stage in purification studies with solvent extraction for MHP (mixed hydroxide precipitate) produced from Gördes laterite ore and investigation of its effect on extraction
Arguente
 Ezgi Kaya (Mestrado)
Izmir Yüksek Teknoloji Enstitüsü, Turquia
2020 Functionalization of the Ti-15Zr-15Mo alloy by micro-arc oxidation
Arguente
 Caio Castanho Xavier (Doutoramento)
Universidade Estadual Paulista Júlio de Mesquita Filho, Brasil
2020 Estudo do efeito do jateamento em superfícies de tântalo
Arguente
 Isabel Augusta Pereira de Magalhães Torres (Mestrado)
Universidade do Porto, Portugal
2016 Interactions between bio-tribocorrosion phenomena and cellular response of titanium-based femoral stems
Arguente
 Maria João Carvalho Runa (Doutoramento)
Universidade do Minho, Portugal
2013 Influence of hydrogen peroxide on the tribocorrosion of titanium
Arguente principal
 José Augusto Santos Sequeiros (Mestrado)
Universidade do Minho, Portugal
2013 Tribocorrosion behavior of nanostructured Ti6Al4V alloy as a femoral stem of hip joint prosthesis
Arguente principal
 Natacha Rivera (Mestrado)
Universidade do Minho, Portugal

Arbitragem científica em conferência

Nome da conferência Local da conferência
2013 - Atual The 2nd international Conference on Biomedical Engineering and Biotechnology China
2011/04/18 - 2011/04/20 VI International Materials Symposium, MATERIAIS 2011 Universidade do Minho

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2022 - Atual ACS Biomaterials Science & Engineering
2021 - Atual Corrosion
2020/04 - Atual Materials Science and Engineering C (0928-4931) Elsevier
2020/02 - Atual Journal of Laser Applications (1938-1387) Laser Institute of America
2019/09 - Atual Composites Part B Engineering (1359-8368) Elsevier
2019/02 - Atual Acta Biomaterialia (1742-7061) Elsevier
2018/09 - Atual Tribology Transactions (1547-397X) Informa UK (Taylor & Francis)
2018/06 - Atual Vacuum (0042-207X) Elsevier
2018/06 - Atual Electrochimica Acta (0013-4686) Elsevier
2018/04 - Atual JoVE-journal of visualized experiments
2018/04 - Atual Materials and Corrosion/Werkstoffe und Korrosion (1521-4176) Wiley (John Wiley & Sons)
2017/01 - Atual Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Springer-Verlag
2017/01 - Atual Corrosion Science (0010-938X) Elsevier
2016/10 - Atual Friction (2223-7704) Springer-Verlag
2016/02 - Atual Journal of Materials: Design and Applications Sage Journals
2015/12 - Atual Results in Physics (2211-3797) Elsevier
2015/12 - Atual Metals MDPI
2015/10 - Atual Journal of Bio- and Tribo-Corrosion (2198-4239) Springer-Verlag
2015/06 - Atual Physica E Low-dimensional Systems and Nanostructures (1386-9477) Elsevier
2014/11 - Atual International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) (2195-8556) Carl Hanser Verlag GMBH & Co KG
2014/11 - Atual Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Sage Journals
2014/11 - Atual Arabian Journal of Chemistry (1878-5352) Elsevier
2014/09 - Atual Journal of Materials Processing Technology (0924-0136) Elsevier
2014/07 - Atual Journal of Materials Engineering and Performance (1544-1024) Springer-Verlag
2014/04 - Atual Tribology International (0301-679X) Elsevier
2014/03 - Atual Materials Chemistry and Physics (0254-0584) Elsevier
2013/11 - Atual Cell Proliferation (1365-2184) Wiley (Blackwell Publishing)
2013/09 - Atual Ceramics International (0272-8842) Elsevier
2013/06 - Atual Applied Surface Science (0169-4332) Elsevier
2013/04 - Atual Materials Characterization (1044-5803) Elsevier
2013/04 - Atual Materials Research (1980-5373) SciELO
2013/04 - Atual Indian Journal of Engineering and Materials Sciences
2012/12 - Atual Journal of Alloys and Compounds (0925-8388) Elsevier
2012/07 - Atual Journal of Applied Mechanical Engineering Longdom Group
2011/12 - Atual International Journal of Engineering Science and Technology (0975-5462) ENGG Journals Publications
2009/11 - Atual Materials & Design (0264-1275) Elsevier

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2022/02 - Atual Powder Metallurgy (Licence) Izmir Yüksek Teknoloji Enstitüsü Kimya Mühendisligi Bölümü, Turquia
2022/02 - Atual Graduation Project (Licence) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/09 - Atual Materials Degradation (Licence) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/09 - Atual Materials Design (Licence) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/09 - Atual Introduction to Materals Science and Engineering (Licence) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/02 - Atual Materials Lab II (Licence) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2021/02 - 2021/06 Materials Science and Engineering (Licence) Izmir Yüksek Teknoloji Enstitüsü, Turquia
2013 - 2018 Degradation of Material Materials Engineering Integrated Master Program (Mestrado integrado) Universidade do Minho, Portugal
2013 - 2018 Introduction to Nanotechnologies and Fabrication Techniques Micro/Nano Technologies Master Program (Mestrado) Universidade do Minho, Portugal
2013 - 2018 Stability and Degradation of Materials Biomedical Engineering Integrated Master Program (Mestrado integrado) Universidade do Minho, Portugal
2016 - 2017 Degradation Mechanisms in Biomaterials Biomedical Engineering Doctoral Program (Doutoramento) Universidade do Minho, Portugal
2016 - 2017 Degradation and Protection of Materials PhD Program in Advanced Materials and Processing (Doutoramento) Universidade do Minho, Portugal
2013 - 2017 Composite Materials Materials Engineering Integrated Master Program (Mestrado integrado) Universidade do Minho, Portugal
2013 - 2017 Nanomaterials and Nanosystems Micro/Nano Technologies Master Program (Mestrado) Universidade do Minho, Portugal

Membro de associação

Nome da associação Tipo de participação
2019 - Atual Federation of the European Materials Societies Membership
2019 - Atual European Federation of Corrosion Membership
2019 - Atual Portuguese Materials Society Membership
2010 - Atual European Microscopy Society Membership
2010 - Atual Turkish Society for Electron Microscopy Membership
2005 - Atual Union of Chambers of Turkish Engineers and Architects, Chamber of Metallurgical Engineers Membership

Outro júri / avaliação

Descrição da atividade Instituição / Organização
2014 - Atual Sofia Afonso Alves. A new concept of nanostructured bio-multifunctional surfaces for dental implants: tribocorrosion resistant, osseoconductive and antimicrobial surfaces. 2014. Qualification exam, PhD program in Biomedical Engineering, University of Minho, Portugal. Universidade do Minho, Portugal
2013 - Atual Maria João Carvalho Runa. Interactions between bio-tribocorrosion phenomena and cellular response of titanium-based femoral stems. 2013. Qualification exam, PhD program in Biomedical Engineering, University of Minho, Portugal. Universidade do Minho, Portugal

Tutoria

Tópico Nome do aluno
2019/09/01 - 2020/08/30 In-situ synthesis of functionally graded Ti-based matrix composites by low-cost liquid metallurgical route Vinícius R. Manso Gonçalves
2019/05/01 - 2019/10/30 Development of new titanium oxide films biofunctionalized with structural and chemical gradient on the Ti-40Nb alloy for osseointegrable implants Natália de Araújo da Costa
2019/02 - 2019/06 Effect of bio-functionalization on the corrosion behavior of Ti-Al2O3 composites, Liudmila Patrícia Guimarães Basíliio
2018/10 - 2019/01 Surface Modification of Ti-Al2O3 Bio- Composites Rui Monteiro and Hélder Teixeira
2018 - 2019 Development of bio-functionalized and tribocorrosion resistant hybrid surfaces on novel Ti-based alloys Dr. Alexandra C. Alves
2017/07/24 - 2018/07/23 Surface functionalization of Ti- 15Zr-15Mo alloy: micro-arc oxidation vs. powder metallurgy Caio Castanho Xavier
2018/06 - 2018/07 Corrosion and tribocorrosion behaviour of Al-Cu matrix graphene reinforced composites Bünyamin Kiroglu
2018/06 - 2018/07 Corrosion and tribocorrosion behaviour of Al-Cu matrix graphene reinforced composites Irem Sapmaz
2017/09/07 - 2018/06/30 Investigation of Dry Sliding, Corrosion and Tribocorrosion Properties for Cu Alloys and Co-Cr-Mo Alloys Subjected to High Pressure Torsion Hasan Köklü
2017/10 - 2018/01 Synthesis of in-situ composites on titanium surfaces Carina Branco Gomes
2017/09/01 - 2017/12/01 Tribocorrosion behavior of nitrided 7075 - T651 aluminum alloy Letícia Oliveira Rocha
2016/11 - 2017/12 Tribocorrosion mechanisms and wear products toxicity of titanium alloys applied as biomaterials Ti-6Al-4V vs. Ti-15Zr-15Mo Bruna Caroliona Costa
2017/02 - 2017/07/04 Biofunctionalization of new Ti alloys with low elastic modulus Ana Maria Rodrigues Lima
2016/02 - 2016/07/04 Corrosion behaviour of Ti-Al2O3 biocomposites Liliana Dias
2016/07 - 2016/07 Corrosion behaviour of in-situ Ti-TiC composites Ezgi Akbulut
2015/05 - 2016/02 Tribocorrosion behaviour of biomedical ß-type Ti-based alloys Dr. Carlos Alberto Fonzar Pintão
2015/10 - 2015/11 Wear and tribocorrosion behavior of different surfaces of Titanium for biomedical applications Julia Ureña Alcázar
2015/02 - 2015/07/14 Mechanical characterization of Ti-HAP biocomposites João Alberto da Costa Miranda
2014/04 - 2015/03 Tribocorrosion of steel SAE 4140 with a TRIPLEX superficial treatment Marcos Soares
2014/10 - 2015/01/30 Optimization of reinforcement homogeneity in Ti-TiO2p composites Carlos Eduardo Gomes Fernandes and João Alberto da Costa Miranda
2014/09 - 2014/12 Tribocorrosion of NiCrTi dental alloys Denise Pupim
2014/02 - 2014/07/22 Tribocorrosion behaviour of titanium based composites Andreia Bastos Pires de Lima
2014/02 - 2014/07/22 Processing of Ti-HAP composites for biomedical applications Catarina Isabel da Silva Oliveira
2014/01/02 - 2014/03/02 Electrochemical techniques for dental materials characterization Adriel Henrique Peixoto da Silva Geraldo
2014/01/02 - 2014/03/02 Electrochemical techniques for dental materials characterization Beatriz Carlos Corrêa
2013/10 - 2014/02/19 Processing and characterization of Ti/TiO2/HAP hybrid composites Andreia Lima and Catarina Oliveira
2013/02 - 2013/07/24 Processing of Ti-TiB2-TiN in-situ hybrid composites by hot pressing Joana Silva
2012/10 - 2012/12/24 Optimization of the processing parameters for titanium biomedical implant materials André Oliveira and Joana Silva
2012/10 - 2012/12/24 Development of porous implant materials by powder metallurgy Mara Teixeira and Andreia Araujo