???global.info.a_carregar???
My name is Rui Manuel Gonçalves and I finished my Integrated Master's Degree in Mechanical Engineering in October 2021 with an avarage of 17/20. During my academic career I had the opportunity to do an internship at Sqédio SA and part-time jobs in companies where I held the positions of HVAC Construction Supervisor at Team4Cooling and Design Engineer in the company Metalubrava. I was also one of the funders members of Innova Junior Technology Consulting as Presidente of the supervisory board. I made my master's thesis in glass fiber reinforced composite recycling where I sucessufly established a way to reuse waste of these materials by integrating them in a gypsum matrix, with more competitive results when compared with conventional plaster. During the dissertation it was necessary to develop a high-precision three-point bending machine and advanced processes of test characterization as Digital Image Correlation and SEM were used. I finnished with a score of 19/20 values. Currently I am member of DEMI, as a Phd student with the 2022.11133.BD scholarship entitled "Recycling strategies for Glass Fibers Reinforced Polymers and their use as reinforcement material in additively manufactured components" As first author I have two publications: "Evaluating the potential use of recycled glass fibers for the development of gypsum-based composites" and "Recycling of Reinforced Glass Fibers Waste: Current Status".
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Rui Manuel Gonçalves

Nomes de citação

  • R.M. Gonçalves

Identificadores de autor

Ciência ID
4214-1793-86AC
ORCID iD
0000-0002-1205-4415

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2016/09 - 2021/10/22
Concluído
 Mechanical Engineering (Mestrado integrado)
Especialização em Project Engineering
Universidade NOVA de Lisboa Faculdade de Ciências e Tecnologia, Portugal
"Avaliação da potencial utilização de fibras de vidro recicladas para o desenvolvimento de compósitos à base de gesso" (TESE/DISSERTAÇÃO)
 17
Percurso profissional

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2021/01/03 - 2021/05/31 Part-time Team4Cooling, Portugal
2020/01 - 2020/09/30 Product designer - freelance SNVG, França
2018/06/01 - 2018/09/30 Internship Metalubrava, Portugal
2018/01/01 - 2018/03/31 Curricular internship Sqédio, Portugal
Projetos

Bolsa

Designação Financiadores
2022/01/03 - 2022/09/30 OZENDEAU
57833678543
Bolseiro de Mestrado
Em curso
Produções

Publicações

Artigo em revista
  1. J.P. Oliveira; A. Shamsolhodaei; Jiajia Shen; J.G. Lopes; R.M. Gonçalves; Mariana de Brito Ferraz; Lourenço Piçarra; et al. "Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel". Materials & Design 219 (2022): 110717-110717. http://dx.doi.org/10.1016/j.matdes.2022.110717.
    10.1016/j.matdes.2022.110717
  2. "Recycling of Reinforced Glass Fibres Waste: Current Status". Materials 15 4 (2022): 1596-1596. http://dx.doi.org/10.3390/ma15041596.
    10.3390/ma15041596
  3. "Evaluating the potential use of recycled glass fibers for the development of gypsum-based composites". Construction and Building Materials 321 (2022): 126320-126320. http://dx.doi.org/10.1016/j.conbuildmat.2022.126320.
    10.1016/j.conbuildmat.2022.126320
Tese / Dissertação
  1. "Avaliação da potencial utilização de fibras de vidro recicladas para o desenvolvimento de compósitos à base de gesso". Mestrado, 2021.

Outros

Outra produção
  1. Project and construction of a rotary sieving device. A rotary sieving machine has been designed and built using additive manufacturing processes. It is made up of three consecutively larger circular sieves that enable a granulometric classification of elements that tend to be slender and have an irregular geometry. The equipment has a transmission system with a worm screw and a circular gear. 2021.
  2. Machine Elements 1 - class handbook. In this output a new version of the Machine Elements 1 class manual has been made with new re-drawn technical drawings using AutoCAD. The drawings have a thorough explanation of the mechanical and physical working principles. In addition, all tables have also been restructured. 2021. Alberto José Antunes Marques Martinho; Rui Manuel Gonçalves; Henrique Viera da Silva.
  3. High precision bending machine for low loads. The machine features a load cell that takes readings up to 200N with an accuracy of 0.25%. Different fixtures can be integrated for 3 or 4 point flexural test. It is driven by a stepper motor with a 15:1 ratio gearbox, controlled with an arduino board.. 2021.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2020/11/10 SolidWorks Flow Simulation Seminar Computer-aided manufacturing discipline
(Lisbon, Portugal)

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2022/09/01 - Atual Mechanical Design Certificate by Dassault Systèmes
2022/02/01 - 2022/02/28 Python Bootcamp From Zero to Hero in Python (Curso médio) Udemy Inc, Estados Unidos
2020/12/29 - 2020/12/30 Commercial approach for junior enterprises (Curso médio) Speak and Lead, Portugal

Membro de associação

Nome da associação Tipo de participação
2020/09 - 2021/07/31 Innova Junior Technology Consulting Presidente of the supervisory board