| Artigo em revista |
- H.F.M. de Queiroz; N.V. dos Santos; J.S.S. Neto; M.D. Banea. "Mechanical characterization of novel natural fibre-reinforced composites via a three-dimensional fibre architecture". Composites Science and Technology (2025): https://doi.org/10.1016/j.compscitech.2024.110996.
10.1016/j.compscitech.2024.110996
- F. P. Berardi; P. H. A. Costa; V. B. Mendes; M. D. Banea. "Dimensional Evaluation of Additively Manufactured Parts for Autonomous Vehicles". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology (2024): https://doi.org/10.35219/awet.2024.03.
10.35219/awet.2024.03
- Ranulfo Neto; Bernardo Mendes; Bernardo Borges; Carolina Moreira; Eduardo Sampaio; Mariana Banea. "Assessment of Shear Fracture Energy in Hybrid Composites with Natural and Synthetic Fibers". Materials (2024): https://doi.org/10.3390/ma17153794.
10.3390/ma17153794
- H.F.M. de Queiroz; V. Pastor; A.C. de Mendonça; J.S.S. Neto; D.K.K. Cavalcanti; M.D. Banea. "Effect of hybridization and composite architecture symmetry in the bonded joint performance of jute/carbon fibre-reinforced composites". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2024.103745.
10.1016/j.ijadhadh.2024.103745
- Matilde Oliveira; Vitor Neves; Mariana D. Banea. "Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites". Materials (2024): https://doi.org/10.3390/ma17081777.
10.3390/ma17081777
- Henrique Queiroz; Vitor Pastor; Jorge Neto; Daniel Cavalcanti; Mariana D Banea. "Mechanical characterization of jute/carbon hybrid epoxy composites". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207241233947.
10.1177/14644207241233947
- H.F.M. de Queiroz; J.S.S. Neto; D.K.K. Cavalcanti; M.D. Banea. "A novel 3D fibre-reinforcement architecture for high performance natural fibre reinforced composite adhesively bonded joints". The Journal of Adhesion (2024): https://doi.org/10.1080/00218464.2023.2200173.
10.1080/00218464.2023.2200173
- Duarte, C.T.; de Queiroz, H.F.M.; Neto, J.S.S.; Cavalcanti, D.K.K.; Banea, M.D.. "Evaluation of durability of 3D-printed multi-material parts for potential applications in structures exposed to marine environments". Procedia Structural Integrity 53 (2024): 299-308. http://dx.doi.org/10.1016/j.prostr.2024.01.037.
10.1016/j.prostr.2024.01.037
- D. K. K. Cavalcanti; M. Medina; H. F. M. de Queiroz; J. S. S. Neto; F. J. P. Chaves; M. D. Banea. "Recent Advances in Adhesive Bonding of 3D-Printed Parts and Methods to Increase their Mechanical Performance". Annals of Dunarea de Jos University of Galati. Fascicle XII, Welding Equipment and Technology (2023): https://doi.org/10.35219/awet.2023.02.
10.35219/awet.2023.02
- Jorge S. S. Neto; Daniel K. K. Cavalcanti; Luiz E. da Cunha Ferro; Henrique F. M. de Queiroz; Ricardo A. A. Aguiar; Mariana D. Banea. "Effect of Multi-Walled Carbon Nanotubes on the Mechanical and Thermal Properties of Curauá Natural-Fiber-Reinforced Composites". C (2023): https://doi.org/10.3390/c9040102.
10.3390/c9040102
- H. F. M de Queiroz; R. H. A Rosa; J. S. S. Neto; D. K. K. Cavalcanti; M. D Banea. "Mechanical characterization of short Curauá/glass fiber-reinforced interlaminar hybrid composite adhesive joints". Journal of Adhesion Science and Technology (2023): https://doi.org/10.1080/01694243.2023.2261263.
10.1080/01694243.2023.2261263
- D.K.K. Cavalcanti; H.F.M. de Queiroz; M.D. Banea. "Performance enhancement of adhesive joints of additive manufactured parts by using different types of fibre reinforcements". International Journal of Adhesion and Adhesives (2023): https://doi.org/10.1016/j.ijadhadh.2023.103371.
10.1016/j.ijadhadh.2023.103371
- GB de Seixas; HFM de Queiroz; JSS Neto; MD Banea. "Effect of water on the mechanical and thermal properties of natural fibre reinforced hybrid composites". Journal of Composite Materials (2023): https://doi.org/10.1177/00219983231166570.
10.1177/00219983231166570
- Mariana Doina Banea. "Natural Fibre Composites and Their Mechanical Behaviour". Polymers (2023): https://doi.org/10.3390/polym15051185.
10.3390/polym15051185
- A. C. de Mendonça; D. K. K. Cavalcanti; H. F. M. de Queiroz; J. S. S. Neto; F. J. P. Chaves; M. D. Banea. "Mechanical Characterization of Filler Modified ABS 3D Printed Composites Made via Fused Filament Fabrication". Annals of Dunarea de Jos University of Galati. Fascicle XII, Welding Equipment and Technology (2022): https://doi.org/10.35219/awet.2022.02.
10.35219/awet.2022.02
- Daniel K. K. Cavalcanti; Jorge S. S. Neto; Henrique F. M. de Queiroz; Yiyun. Wu; Victor F. S. Neto; Mariana D. Banea. "Development and Mechanical Characterization of Short Curauá Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling". Polymers (2022): https://doi.org/10.3390/polym14225047.
10.3390/polym14225047
- Daniel K. K. Cavalcanti; Henrique F. M. de Queiroz; Jorge S. S. Neto; Mariana D. Banea. "Strengthening of additive manufactured parts by using different type of fibre reinforcements". The International Journal of Advanced Manufacturing Technology (2022): https://doi.org/10.1007/s00170-022-10327-8.
10.1007/s00170-022-10327-8
- Henrique F.M de Queiroz; Mariana D. Banea. "Methods to increase the mechanical performance of composite adhesive joints: An overview with focus on joints with natural fibre composite adherends". Journal of Composite Materials (2022): https://doi.org/10.1177/00219983221125906.
10.1177/00219983221125906
- Jorge S. S. Neto; Henrique F. M. de Queiroz; Ricardo A. A. Aguiar; Mariana D. Banea. "A Review on the Thermal Characterisation of Natural and Hybrid Fiber Composites". Polymers (2021): https://doi.org/10.3390/polym13244425.
10.3390/polym13244425
- H. F. M. de Queiroz; M. D. Banea; D. K. K. Cavalcanti. "Adhesively bonded joints of jute, glass and hybrid jute/glass fibre-reinforced polymer composites for automotive industry". Applied Adhesion Science 9 1 (2021): https://doi.org/10.1186/s40563-020-00131-6.
10.1186/s40563-020-00131-6
- Sofia Maggiore; Mariana D. Banea; Paola Stagnaro; Giorgio Luciano. "A Review of Structural Adhesive Joints in Hybrid Joining Processes". Polymers (2021): https://doi.org/10.3390/polym13223961.
10.3390/polym13223961
- Jorge S. S. Neto; Henrique Queiroz; Daniel Cavalcanti; Ricardo Aguiar; António Pereira; Mariana Doina Banea. "Effect of ultraviolet radiation and water spraying on the mechanical properties of multi-walled carbon nanotubes reinforced natural fiber and hybrid composites". Journal of Applied Polymer Science (2021): 51915-51915. https://doi.org/10.1002/app.51915.
10.1002/app.51915
- Henrique Queiroz; Mariana Doina Banea; Daniel Cavalcanti; Jorge Neto. "The effect of multiscale hybridization on the mechanical properties of natural fiber-reinforced composites". Journal of Applied Polymer Science 138 41 (2021): 51213-51213. https://doi.org/10.1002/app.51213.
10.1002/app.51213
- D. K. K. Cavalcanti; M. D. Banea; H. F. M. de Queiroz. "Effect of Material on the Mechanical Properties of Additive Manufactured Thermoplastic Parts". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology (2020): https://doi.org/10.35219/awet.2020.01.
10.35219/awet.2020.01
- S. Budhe; M. D. Banea; S. de Barros. "Analysis of Failure Pressure of Defective Pipes Repaired with Composite Systems Considering the Plastic Deformation of Pipe". Journal of The Institution of Engineers (India): Series C (2020): https://doi.org/10.1007/s40032-020-00612-4.
10.1007/s40032-020-00612-4
- JSS Neto; MD Banea; DKK Cavalcanti; HFM Queiroz; RAA Aguiar. "Analysis of mechanical and thermal properties of epoxy multiwalled carbon nanocomposites". Journal of Composite Materials (2020): 002199832093923-002199832093923. https://doi.org/10.1177/0021998320939232.
10.1177/0021998320939232
- DKK Cavalcanti; MD Banea; JSS Neto; RAA Lima. "Comparative analysis of the mechanical and thermal properties of polyester and epoxy natural fibre-reinforced hybrid composites". Journal of Composite Materials (2020): https://doi.org/10.1177/0021998320976811.
10.1177/0021998320976811
- A. L. Pereira; M. D. Banea; A. B. Pereira. "Effect of intralaminar hybridization on mode I fracture toughness of natural fiber-reinforced composites". Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 9 (2020): https://doi.org/10.1007/s40430-020-02525-w.
10.1007/s40430-020-02525-w
- G Viana; RJC Carbas; M Costa; MD Banea; LFM da Silva. "A new cohesive element to model environmental degradation of adhesive joints in the rail industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): https://doi.org/10.1177/0954406220948901.
10.1177/0954406220948901
- HFM de Queiroz; MD Banea; DKK Cavalcanti. "Experimental analysis of adhesively bonded joints in synthetic- and natural fibre-reinforced polymer composites". Journal of Composite Materials (2020): 002199831987697-002199831987697. https://doi.org/10.1177/0021998319876979.
10.1177/0021998319876979
- Alexandre L. Pereira; Mariana D. Banea; Jorge S.S. Neto; Daniel K.K. Cavalcanti. "Mechanical and Thermal Characterization of Natural Intralaminar Hybrid Composites Based on Sisal". Polymers 12 4 (2020): 866-866. https://doi.org/10.3390/polym12040866.
10.3390/polym12040866
- M. D. Banea; L. F. M. Da Silva; R. J. C. Carbas; D.K.K Cavalcanti; L.F.G. De Souza. "The effect of environment and fatigue loading on the behaviour of TEPs-modified adhesives". The Journal of Adhesion (2020): https://doi.org/10.1080/00218464.2019.1680546.
10.1080/00218464.2019.1680546
- Rosemere de Araujo Alves Lima; Daniel Kawasaki Cavalcanti; Jorge de Souza e Silva Neto; Hector Meneses da Costa; Mariana Doina Banea. "Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites". Polymer Composites (2020): https://doi.org/10.1002/pc.25371.
10.1002/pc.25371
- D. K. K. Cavalcanti; M. D. Banea; H. F. M. de Queiroz. "Mechanical Characterization of Bonded Joints Made of Additive Manufactured Adherends". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology (2019): https://doi.org/10.35219/awet.2019.04.
10.35219/awet.2019.04
- P. A. Zugliani; M. D. Banea; S. Budhe; R. J. Carbas; L. F. M. da Silva; N. R. F. Rohem; S. de Barros. "Bonded composite repair of metallic pipeline using energy release rate method". Journal of Adhesion Science and Technology (2019): 1-16. https://doi.org/10.1080/01694243.2019.1632537.
10.1080/01694243.2019.1632537
- M. Q. dos Reis; M. D. Banea; L. F. M. da Silva; R. J. C. Carbas. "Mechanical characterization of a modern epoxy adhesive for automotive industry". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 8 (2019): https://doi.org/10.1007/s40430-019-1844-2.
10.1007/s40430-019-1844-2
- J. S. S. Neto; R. A. A. Lima; D. K. K. Cavalcanti; J. P. B. Souza; R. A. A. Aguiar; M. D. Banea. "Effect of chemical treatment on the thermal properties of hybrid natural fiber-reinforced composites". Journal of Applied Polymer Science (2019): 47154-47154. https://doi.org/10.1002/app.47154.
10.1002/app.47154
- Rosemere de A. A. Lima; Daniele Rocca; Hector R. M. Da Costa; Juliana P. B. de Sousa; Paolo Bettini; Giuseppe Sala; Mariana D. Banea. "Interfacial adhesion between embedded fibre optic sensors and epoxy matrix in composites". Journal of Adhesion Science and Technology (2018): https://doi.org/10.1080/01694243.2018.1537053.
10.1080/01694243.2018.1537053
- G. Viana; J. Machado; R. Carbas; M. Costa; L. F. M. da Silva; M. Vaz; M. D. Banea. "Strain rate dependence of adhesive joints for the automotive industry at low and high temperatures". Journal of Adhesion Science and Technology (2018): 1-18. https://doi.org/10.1080/01694243.2018.1464635.
10.1080/01694243.2018.1464635
- M.D. Banea; M. Rosioara; R.J.C. Carbas; L.F.M. da Silva. "Multi-material adhesive joints for automotive industry". Composites Part B: Engineering 151 (2018): 71-77. https://doi.org/10.1016/j.compositesb.2018.06.009.
10.1016/j.compositesb.2018.06.009
- Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Barbosa, A.Q.; de Barros, S.; Viana, G.. "Effect of water on the behaviour of adhesives modified with thermally expandable particles". International Journal of Adhesion and Adhesives 84 (2018): 250-256. http://dx.doi.org/10.1016/j.ijadhadh.2018.04.002.
10.1016/j.ijadhadh.2018.04.002
- J. Bonaldo; M.D. Banea; R.J.C. Carbas; L.F.M. Da Silva; S. De Barros. "Functionally graded adhesive joints by using thermally expandable particles". The Journal of Adhesion (2018): https://doi.org/10.1080/00218464.2018.1456338.
10.1080/00218464.2018.1456338
- BANEA, Mariana. "Effect of Babassu Natural Filler on PBAT/PHB Biodegradable Blends: An Investigation of Thermal, Mechanical, and Morphological Behavior". Materials (2018): http://www.mdpi.com/1996-1944/11/5/820.
10.3390/ma11050820
- G. Viana; M. Costa; M. D. Banea; L. F. M. da Silva. "Cohesive Properties of Environmentally Degraded Epoxy Adhesives". U.Porto Journal of Engineering (2018): https://doi.org/10.24840/2183-6493_003.002_0005.
10.24840/2183-6493_003.002_0005
- Arouche, M.M.; Budhe, S.; Alves, L.A.; Teixeira de Freitas, S.; Banea, M.D.; de Barros, S.. "Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests". Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 1 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85040367446&partnerID=MN8TOARS.
10.1007/s40430-017-0959-6
- Arouche, M.M.; Budhe, S.; Banea, M.D.; Teixeira de Freitas, S.; de Barros, S.. "Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85045050142&partnerID=MN8TOARS.
10.1177/1464420718766626
- De Barros, S.; Budhe, S.; Banea, M.D.; Rohem, N.R.F.; Sampaio, E.M.; Perrut, V.A.; Lana, L.D.M.. "An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe". Frattura ed Integrita Strutturale 12 44 (2018): 151-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045734934&partnerID=MN8TOARS.
10.3221/IGF-ESIS.44.12
- M. D. Banea; L. F. M. da Silva; R. J. C. Carbas; S. de Barros. "Debonding on command of multi-material adhesive joints". The Journal of Adhesion 93 10 (2017): 756-770. https://doi.org/10.1080%2F00218464.2016.1199963.
10.1080/00218464.2016.1199963
- Banea, M.D.; da Silva, L.F.M.; Carbas, R.; Campilho, R.D.S.G.. "Effect of material on the mechanical behaviour of adhesive joints for the automotive industry". Journal of Adhesion Science and Technology 31 6 (2017): 663-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986203538&partnerID=MN8TOARS.
10.1080/01694243.2016.1229842
- Viana, G.; Costa, M.; Banea, M.D.; da Silva, L.F.M.. "Behaviour of environmentally degraded epoxy adhesives as a function of temperature". Journal of Adhesion 93 1-2 (2017): 95-112. http://www.scopus.com/inward/record.url?eid=2-s2.0-84980344061&partnerID=MN8TOARS.
10.1080/00218464.2016.1179118
- De Barros, S.; Banea, M.D.; Budhe, S.; De Siqueira, C.E.R.; Lobão, B.S.P.; Souza, L.F.G.. "Experimental analysis of metal-composite repair of floating offshore units (FPSO)". Journal of Adhesion 93 1-2 (2017): 147-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-84980407338&partnerID=MN8TOARS.
10.1080/00218464.2016.1177514
- Santos, F.C.D.; Banea, M.D.; Carlo, H.L.; De Barros, S.. "Test methods for bond strength of glass fiber posts to dentin: A review". Journal of Adhesion 93 1-2 (2017): 159-186. http://www.scopus.com/inward/record.url?eid=2-s2.0-84989237209&partnerID=MN8TOARS.
10.1080/00218464.2016.1184094
- Teixeira de Freitas, S.; Banea, M.D.; Budhe, S.; de Barros, S.. "Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests". Composite Structures 164 (2017): 68-75. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008215955&partnerID=MN8TOARS.
10.1016/j.compstruct.2016.12.058
- Fernandes, P.; Viana, G.; Carbas, R.J.C.; Costa, M.; da Silva, L.F.M.; Banea, M.D.. "The influence of water on the fracture envelope of an adhesive joint". Theoretical and Applied Fracture Mechanics 89 (2017): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009788288&partnerID=MN8TOARS.
10.1016/j.tafmec.2017.01.001
- Domingues, N.R.E.; Trojan, J.C.; Campilho, R.D.S.G.; Carbas, R.J.C.; Banea, M.D.; da Silva, L.F.M.. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Ciencia e Tecnologia dos Materiais 29 1 (2017): e114-e118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021952151&partnerID=MN8TOARS.
10.1016/j.ctmat.2016.04.009
- Budhe, S.; Banea, M.D.; de Barros, S.; da Silva, L.F.M.. "An updated review of adhesively bonded joints in composite materials". International Journal of Adhesion and Adhesives 72 (2017): 30-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992522068&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2016.10.010
- Viana, G.; Costa, M.; Banea, M.D.; Da Silva, L.F.M.. "A review on the temperature and moisture degradation of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231 5 (2017): 488-501. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021923122&partnerID=MN8TOARS.
10.1177/1464420716671503
- Budhe, S.; Banea, M.D.; Rohem, N.R.F.; Sampaio, E.M.; de Barros, S.. "Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines". Composite Structures 176 (2017): 1013-1019. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021416774&partnerID=MN8TOARS.
10.1016/j.compstruct.2017.06.044
- Viana, G.; Costa, M.; Banea, M.D.; da Silva, L.F.M.. "Moisture and temperature degradation of double cantilever beam adhesive joints". Journal of Adhesion Science and Technology 31 16 (2017): 1824-1838. http://www.scopus.com/inward/record.url?eid=2-s2.0-85011306632&partnerID=MN8TOARS.
10.1080/01694243.2017.1284640
- Viana, G.; Costa, M.; Banea, M.D.; da Silva, L.F.M.. "Water diffusion in double cantilever beam adhesive joints". Latin American Journal of Solids and Structures 14 2 (2017): 188-201. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013639066&partnerID=MN8TOARS.
10.1590/1679-78253040
- Rohem, N.R.F.; Pacheco, L.J.; Budhe, S.; Banea, M.D.; Sampaio, E.M.; de Barros, S.. "Development and qualification of a new polymeric matrix laminated composite for pipe repair". Composite Structures 152 (2016): 737-745. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973109228&partnerID=MN8TOARS.
10.1016/j.compstruct.2016.05.091
- Ghumatkar, A.; Budhe, S.; Sekhar, R.; Banea, M.D.; De Barros, S.. "Influence of adherend surface roughness on the adhesive bond strength". Latin American Journal of Solids and Structures 13 13 (2016): 2356-2370. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984813660&partnerID=MN8TOARS.
10.1590/1679-78253066
- Nunes, S.L.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.; De Sousa, C.C.R.G.; Fernandes, T.A.B.; Banea, M.D.; Da Silva, L.F.M.. "Comparative failure assessment of single and double lap joints with varying adhesive systems". Journal of Adhesion 92 7-9 (2016): 610-634. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962468952&partnerID=MN8TOARS.
10.1080/00218464.2015.1103227
- Barbosa, A.Q.; Da Silva, L.F.M.; Banea, M.D.; Öchsner, A.. "Methods to increase the toughness of structural adhesives with micro particles: An overview with focus on cork particles". Materialwissenschaft und Werkstofftechnik 47 4 (2016): 307-325. http://www.scopus.com/inward/record.url?eid=2-s2.0-84963628416&partnerID=MN8TOARS.
10.1002/mawe.201600498
- Costa, M.; Viana, G.; Canto, C.; Da Silva, L.F.M.; Banea, M.D.; Chaves, F.; Campilho, R.D.S.G.; Fernandes, A.A.. "Effect of the size reduction on the bulk tensile and double cantilever beam specimens used in cohesive zone models". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 5 (2016): 968-982. http://www.scopus.com/inward/record.url?eid=2-s2.0-84988419036&partnerID=MN8TOARS.
10.1177/1464420715610248
- Marques, E.A.S.; Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Sato, C.. "Effect of low temperature on tensile strength and mode i fracture energy of a room temperature vulcanizing silicone adhesive". Journal of Testing and Evaluation 44 3 (2016): 1284-1293. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984578001&partnerID=MN8TOARS.
10.1520/JTE20140208
- Campilho, R.D.S.G.; Leitão, A.C.C.; Fernandes, R.L.; Azevedo, J.C.S.; Banea, M.D.. "Cohesive law estimation in mode II of a ductile adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 26 (2015): 27-32. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984535678&partnerID=MN8TOARS.
- Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". Frattura ed Integrita Strutturale 31 (2015): 1-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920404080&partnerID=MN8TOARS.
10.3221/IGF-ESIS.31.01
- Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Structural adhesives modified with thermally expandable particles". Journal of Adhesion 91 10-11 (2015): 823-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922825124&partnerID=MN8TOARS.
10.1080/00218464.2014.985785
- Fernandes, T.A.B.; Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction". Journal of Adhesion 91 10-11 (2015): 841-862. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937031747&partnerID=MN8TOARS.
10.1080/00218464.2014.994703
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "A Study on Microstructure Characteristics of TEPs-modified Adhesives". Microscopy and Microanalysis 21 (2015): 7-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944063937&partnerID=MN8TOARS.
10.1017/S1431927615013847
- Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Adhesive thickness effects of a ductile adhesive by optical measurement techniques". International Journal of Adhesion and Adhesives 57 (2015): 125-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919608228&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2014.12.004
- Budhe, S.; Ghumatkar, A.; Birajdar, N.; Banea, M.D.. "Effect of surface roughness using different adherend materials on the adhesive bond strength". Applied Adhesion Science 3 1 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-85014137521&partnerID=MN8TOARS.
10.1186/s40563-015-0050-4
- Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". International Journal of Adhesion and Adhesives 54 (2014): 191-199. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903983437&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2014.06.008
- Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method". International Journal of Adhesion and Adhesives 53 (2014): 15-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901986334&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2014.01.015
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive". Journal of Adhesion 91 5 (2014): 331-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-84910090965&partnerID=MN8TOARS.
10.1080/00218464.2014.903802
- Marques, E.A.S.; Da Silva, L.F.M.; Banea, M.D.; Carbas, R.J.C.. "Adhesive joints for low- and high-temperature use: An overview". Journal of Adhesion 91 7 (2014): 556-585. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919489787&partnerID=MN8TOARS.
10.1080/00218464.2014.943395
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications". Journal of Adhesion Science and Technology 28 14-15 (2014): 1367-1381. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899440602&partnerID=MN8TOARS.
10.1080/01694243.2012.697388
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.; Sato, C.. "Smart adhesive joints: An overview of recent developments". Journal of Adhesion 90 1 (2014): 16-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886678032&partnerID=MN8TOARS.
10.1080/00218464.2013.785916
- Banea, M.D.; Silva, L.F.M.D.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921290337&partnerID=MN8TOARS.
- Campilho, R.D.S.G.; Fernandes, T.A.B.; Banea, M.D.; Silva, L.F.M.D.. "Cohesive Zone and Extended Finite Element modelling for bonded joint strength prediction". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921310067&partnerID=MN8TOARS.
- Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method". Journal of Adhesion 89 7 (2013): 529-547. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876114008&partnerID=MN8TOARS.
10.1080/00218464.2013.768106
- Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.B.P.; Da Silva, L.F.M.. "Modelling adhesive joints with cohesive zone models: Effect of the cohesive law shape of the adhesive layer". International Journal of Adhesion and Adhesives 44 (2013): 48-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874908653&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2013.02.006
- Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Fracture toughness determination of adhesive and co-cured joints in natural fibre composites". Composites Part B: Engineering 50 (2013): 120-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877688451&partnerID=MN8TOARS.
10.1016/j.compositesb.2013.01.025
- Campilho, R.D.S.G.; Banea, M.D.. "Selection of the most suitable CZM conditions in the finite element strength prediction of adhesive joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 33-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896497139&partnerID=MN8TOARS.
- Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "An overview of the technologies for adhesive debonding on command". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 11-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896503151&partnerID=MN8TOARS.
- Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Chaves, F.J.P.; da Silva, L.F.M.. "Feasibility of the extended finite element method for the simulation of composite bonded joints". 730-732 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84880983808&partnerID=MN8TOARS.
10.4028/www.scientific.net/MSF.730-732.513
- Campilho, Raul D.S.G.; Chaves, Filipe J.P.; Pinto, Arnaldo M.G.; Banea, Mariana D.; da Silva, Lucas F.M.. "Influence of the Cohesive Law Parameters on the Strength Prediction of Adhesively-Bonded Joints". Materials Science Forum 730-732 (2012): 1000-1005. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.1000.
10.4028/www.scientific.net/msf.730-732.1000
- Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.B.P.; Da Silva, L.F.M.. "Modelling of single-lap joints using cohesive zone models: Effect of the cohesive parameters on the output of the simulations". Journal of Adhesion 88 4-6 (2012): 513-533. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861122382&partnerID=MN8TOARS.
10.1080/00218464.2012.660834
- Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Innovative finite element techniques for strength prediction of bonded joints | Tehnici inovative de analiza cu elemente finite a rezistentei îmbinarilor lipite". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 26-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874208180&partnerID=MN8TOARS.
- Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Optimization study of hybrid spot-welded/bonded single-lap joints". International Journal of Adhesion and Adhesives 37 (2012): 86-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861591998&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2012.01.018
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on tensile strength and mode i fracture toughness of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 26 7 (2012): 939-953. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864683421&partnerID=MN8TOARS.
10.1163/156856111X593649
- Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "High temperature adhesives for aerospace applications,Adezivi rezistenti la temperaturi ridicate utilizati în aplicatii aerospatiale". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 16-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874217795&partnerID=MN8TOARS.
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". Journal of Adhesion 88 4-6 (2012): 534-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861131754&partnerID=MN8TOARS.
10.1080/00218464.2012.660835
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Moulds design for adhesive bulk and joint specimens manufacturing". Assembly Automation 32 3 (2012): 284-292. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870263974&partnerID=MN8TOARS.
10.1108/01445151211244456
- Banea, M.D.; De Sousa, F.S.M.; Da Silva, L.F.M.; Campilho, R.D.S.G.; De Pereira, A.M.B.. "Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 25 18 (2011): 2461-2474. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052615334&partnerID=MN8TOARS.
10.1163/016942411X580144
- Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Silva, R.F.; Da Silva, L.F.M.. "Strength improvement of adhesively-bonded joints using a reverse-bent geometry". Journal of Adhesion Science and Technology 25 18 (2011): 2351-2368. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052646241&partnerID=MN8TOARS.
10.1163/016942411X580081
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode i fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". International Journal of Adhesion and Adhesives 31 5 (2011): 273-279. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956128948&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2010.09.005
- Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Comparative evaluation of bonded, welded and weldbonded structural joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 5-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859352202&partnerID=MN8TOARS.
- Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mechanical characterization of a high temperature epoxy adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 58-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859324938&partnerID=MN8TOARS.
- Campilho, R.D.S.G.; Banea, M.D.; Chaves, F.J.P.; Silva, L.F.M.D.. "EXtended Finite Element Method for fracture characterization of adhesive joints in pure mode i". Computational Materials Science 50 4 (2011): 1543-1549. http://www.scopus.com/inward/record.url?eid=2-s2.0-79151484108&partnerID=MN8TOARS.
10.1016/j.commatsci.2010.12.012
- Campilho, R.D.S.G.; Banea, M.D.; Pinto, A.M.G.; Da Silva, L.F.M.; De Jesus, A.M.P.. "Strength prediction of single- and double-lap joints by standard and extended finite element modelling". International Journal of Adhesion and Adhesives 31 5 (2011): 363-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956136790&partnerID=MN8TOARS.
10.1016/j.ijadhadh.2010.09.008
- Banea, M.D.; Da Silva, L.F.M.. "Static and fatigue behaviour of room temperature vulcanising silicone adhesives for high temperature aerospace applications". Materialwissenschaft und Werkstofftechnik 41 5 (2010): 325-335. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953569344&partnerID=MN8TOARS.
10.1002/mawe.201000605
- Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Testing of RTV silicone adhesives for high temperature applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 21 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-79951686784&partnerID=MN8TOARS.
- Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature dependence of the fracture toughness of adhesively bonded joints". Journal of Adhesion Science and Technology 24 11-12 (2010): 2011-2026. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956562666&partnerID=MN8TOARS.
10.1163/016942410X507713
- Banea, M.D.; Da Silva, L.F.M.. "The effect of temperature on the mechanical properties of adhesives for the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 224 2 (2010): 51-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951684567&partnerID=MN8TOARS.
10.1243/14644207JMDA283
- Banea, M.D.; da Silva, L.F.M.. "Mechanical characterization of flexible adhesives". Journal of Adhesion 85 4-5 (2009): 261-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349105063&partnerID=MN8TOARS.
10.1080/00218460902881808
- Banea, M.; Da Silva, L.. "Experiments on single lap joints with flexible adhesives". Metalurgia International 14 SPEC. ISS. (2009): 139-142. http://www.scopus.com/inward/record.url?eid=2-s2.0-62749159003&partnerID=MN8TOARS.
- Banea, M.D.; Da Silva, L.F.M.. "Adhesively bonded joints in composite materials: An overview". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 223 1 (2009): 1-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649742908&partnerID=MN8TOARS.
10.1243/14644207JMDA219
- Mircea, O.; Banea, M.D.; Visan, D.. "Thermal fields and residual stresses in numerically modelled and experimentally determined welded joints". Welding in the World 52 SPEC. ISS. (2008): 579-584. http://www.scopus.com/inward/record.url?eid=2-s2.0-49249085891&partnerID=MN8TOARS.
- Mircea, O.; Banea, D.M.; Constantin, E.; Visan, D.. "A numerical/experimental study of temperature fields in the X52 steel butt weld". Welding in the World 51 SPEC. ISS. (2007): 385-394. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547670477&partnerID=MN8TOARS.
|
| Capítulo de livro |
- Neto, Jorge S. S.; Queiroz, Henrique F. M. de; Banea, Mariana D.. "4 Recent developments in nanofillermodified natural fiber composites". In Cellulose Composites, 115-136. De Gruyter, 2023.
10.1515/9783110768787-004
- Banea, M. D.; H.F.M. de Queiroz. Autor correspondente: Banea, M. D.. "Application of Structural Adhesives in Composite Connections". In Structural Adhesives: Properties, Characterizations and Applications, 375-396. 2023.
Publicado
- Banea, Mariana D.; Neto, Jorge S. S.; Queiroz, Henrique F. M.. "Thermal Characterisation of Bio Fibre Composites". In Bio-Fiber Reinforced Composite Materials, 281-298. Springer Nature Singapore, 2022.
10.1007/978-981-16-8899-7_16
- Banea, Mariana D.; Neto, Jorge S. S.; Cavalcanti, Daniel K. K.. "Thermal Analysis of Hybrid Epoxy/Synthetic/Natural Fiber Composites". In Handbook of Epoxy/Fiber Composites, 1-32. Springer Singapore, 2022.
9789811581410
- Banea, Mariana D.; Neto, Jorge S. S.; Cavalcanti, Daniel K. K.. "Recent Trends in Surface Modification of Natural Fibres for Their Use in Green Composites". In Materials Horizons: From Nature to Nanomaterials, 329-350. Springer Singapore, 2021.
Publicado • 10.1007/978-981-15-9643-8_12
- Banea, Mariana D.. "Dissimilar Joining of PMCs to Metals – Adhesive Bonding". In Encyclopedia of Materials: Composites, 324-333. Elsevier, 2021.
10.1016/b978-0-12-819724-0.00061-6
- Banea, Mariana D.; Budhe, Sandip. "Water Sorption and Solvent Sorption Techniques of Epoxy/Synthetic/Natural Fiber Composites". In Handbook of Epoxy/Fiber Composites, 1-30. Springer Singapore, 2021.
10.1007/978-981-15-8141-0_40-1
- Banea, M. D.. "Debonding of Structural Adhesive Joints". In Structural Adhesive Joints: Design, Analysis and Testing, K.L. Mittal and S. K. Panigrahi (eds.), 133-156. John Wiley & Sons (Scrivener Publishing LLC),, 2020.
Publicado
- da Silva, Lucas F. M.; Carbas, Ricardo J. C.; Banea, Mariana D.. "Failure Strength Tests". In Handbook of Adhesion Technology, 489-521. Springer International Publishing, 2018.
10.1007/978-3-319-55411-2_19
- Banea, M.D.. "Recent developments in modelling of adhesive bonded joints". 49-71. Nova Publishers, 2017.
Publicado
- Banea, Mariana D.; da Silva, Lucas F. M.; Campilho, Raul D. S. G.. "Principles of Adhesive Bonding". In Joining of Polymer-Metal Hybrid Structures, 3-27. John Wiley & Sons, Inc, 2017.
Publicado • 10.1002/9781119429807.ch1
- Campilho, Raul D. S. G.; da Silva, Lucas F. M.; Banea, Mariana D.. "Adhesive Bonding of Polymer Composites to Lightweight Metals". In Joining of Polymer-Metal Hybrid Structures, 29-59. John Wiley & Sons, Inc, 2017.
Publicado • 9781119429807
|