???global.info.a_carregar???
João Pedro Lourenço Gil Nunes. Publicou 36 artigos em revistas especializadas. Possui 1 capítulo(s) de livros e 7 livro(s). No seu currículo Ciência Vitae os termos mais frequentes na contextualização da produção científica, tecnológica e artístico-cultural são: FEM; Carbon fibre; Composite; Laser cutting equipment; Finite element analysis; Thermoplastic matrix composite; Composite gas cylinder; Mechanical behavior; Filament winding; glass/polypropylene commingled tapes; Science & Technology; Carbon fibres; Thermoplastic; Towpreg; Pultrusion; Compression moulding; Engenharia e Tecnologia::Engenharia dos Materiais; Engenharia e Tecnologia::Outras Engenharias e Tecnologias; Engenharia e Tecnologia::Engenharia Mecânica; E. Pultrusion; A. Thermoplastic resin; A. Polymer-matrix composites (PMCs); B. Mechanical properties; Primospire®; Primospire; Powder coating; Composites; Compression; Thermoplastics; Polar filament winding; Optimisation; Fibre reinforced epoxy composite; Composite granty; Vacuum infusion; CFRP; Compósitos de matriz termoplástica; Pultrusão; Fibras de carbono; Polipropileno; Propriedades mecânicas; Thermoplastic matrix composites; Towpregs; Polypropylene; Mechanical properties; Braided composite rods; Braidtrusion; Pseudo-ductile; Long fibre thermoplastics; LFT; Glass-fibre; Natural fibres reinforced composites; Sisal fibres; Fax fibres; Unsaturated polyesters; Epoxy resin; Mechanical behaviour; Fabrics/textiles; Polymer-matrix composites; Textile composites; A. Fabrics/textiles; A. Polymer-matrix composites; A. Textile composites; Woven fabric; Glass fiber; Pre-impregnated; Commigled fibres; Tapes; Composite mechanical properties; Glass fibres; Polymers; FEA; Rotational moulding; A. Glass fibres; A. Polymers; C. FEA; E. Filament winding; E. Rotational moulding; PCT; Pre-impregnated materials; Thermoplastic composites; Thermoplastic resin; Polymer-matrix composites (PMCs); Vacuum-infusion; CRFP; Advanced composites; Life Cycle Thinking; Life Cycle Assessment; Life Cycle Costing; Polymer Composite; Water Storage Tanks; Composite materials; Laser cutting; Continuous reinforced composites; Continuous carbon and glass fibres; Optimization; Mechanical tests; Anisotropic composite plates; Flexural stiffness; Three-point bending test; Polyester and vinylester thermoset matrices; Vinylester resin; Thermosetting matrices; Heated die; Polyester; Vinylester thermoset matrices; Modelling; Isothermal consolidation; Powder coating process; C. Micro-mechanics; E. Compression moulding; mechanical properties; micro-mechanics; compression moulding; Natural fibers; Composite maeterials; Jute; Flax; Sisal; Thermoplastic matrix co mposites; Processing; Continuous fibre reinforced composites; Compression molding; Glass fibers; Compressing molding; PVC; Glass fibre reinforced pipes; Pipe repairing; Reinforced thermoplastics; Long fiber composites; Carbon fibre reinforced polymer; Concrete structures; Durability; Rehabilitation; Composite vessels; Pressure vessels; Thermoplastic liner; FEM analysis; Internal pressure tests; Carbon ¿bres; Carbon composites; Surface treatment; Interfacial properties; 678.073; Jute fibres; Unsaturated polyester; Fibreglass composites; .
Identification

Personal identification

Full name
João Pedro Lourenço Gil Nunes
Gender
Male

Citation names

  • Nunes, J. P.
  • J. P. Nunes
  • Joao Pedro Nunes

Author identifiers

Ciência ID
FB13-B8F0-AE60
ORCID iD
0000-0002-1716-5165

Email addresses

  • jpn@dep.uminho.pt (Professional)

Telephones

Fax
  • 253510339 (Professional)
Telephone
  • 253510320 (Professional)

Addresses

  • Universidade do Minho. Departamento de Engenharia de polímeros-Campus de Azurém-Universidade do Minho, 4800-058, Guimarães, Guimarães, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Materials Engineering - Composites

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Intermediate (B1) Advanced (C1) Intermediate (B1) Intermediate (B1)
Spanish; Castilian Intermediate (B1) Advanced (C1) Beginner (A1) Intermediate (B1)
Italian Intermediate (B1) Beginner (A1) Beginner (A1) Intermediate (B1)
Education
Degree Classification
1998/12/02
Concluded
Ciência e Engenharia de Polímeros (Doutoramento)
Major in Especialidade: Projecto e Processamento de Polímeros
Universidade do Minho, Portugal
Muito Bom
1998
Concluded
N/A (Doutoramento)
Major in Ciência e Engenharia de Polímeros
Universidade do Minho Escola de Engenharia, Portugal
"A Study of the Processing and Properties of Sheet Molding Compounds and Unidirectional Carbon Fibre Towpregs" (THESIS/DISSERTATION)
Unanimidade
1992
Concluded
N/A (Mestrado)
Universidade do Minho Escola de Engenharia, Portugal
"Compostos de Moldação (SMC). Propriedades e Moldação por Compressão." (THESIS/DISSERTATION)
Muito Bom
1981
Concluded
Engenharia Mecânica (Licenciatura)
Universidade do Porto Faculdade de Engenharia, Portugal
"N/A" (THESIS/DISSERTATION)
14 valores
Affiliation

Teaching in Higher Education

Category
Host institution
Employer
1998/12/02 - Current Assistant Professor (University Teacher) Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
1992/06/01 - 1998/12/02 Assistant (University Teacher) Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
1988/11/01 - 1992/05/31 Trainee Assistant (University Teacher) Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal

Other Careers

Category
Host institution
Employer
1981/09/01 - 1981/12/31 Professor do ensino básico e secundário (Professor do ensino básico e secundário) Escola Secundária da Trofa, Portugal
Escola Secundária da Trofa, Portugal

Others

Category
Host institution
Employer
1982/01/02 - 1988/10/31 Diretor Técnico Vidropol, SA, Portugal
1982/06/01 - 1984/06/01 Técnico especialista da Marinha Portuguesa Marinha Portuguesa, Portugal
Direção de Manutenção do Ministério da Marinha, Portugal
Projects

Grant

Designation Funders
2021/01 - 2025/12 Laboratório Associado de Sistemas Inteligentes
168241UID
LA/P/0104/2020
Universidade Nova de Lisboa Centro de Tecnologias e Sistemas, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Instituto Politécnico do Porto Centro de Investigação em Sistemas Computacionais Embebidos e de Tempo-Real, Portugal

Universidade do Minho, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Universidade do Porto Centro de Matemática, Portugal

Universidade Nova de Lisboa, Portugal

Universidade do Porto Laboratório de Inteligência Artificial e Ciência de Computadores, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade de Aveiro, Portugal

Universidade de Aveiro Instituto de Engenharia Eletrónica e Informática de Aveiro, Portugal

Universidade do Minho Centro ALGORITMI, Portugal

Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade de Coimbra Departamento de Engenharia Civil, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade de Coimbra, Portugal

Instituto Politécnico do Porto Grupo de Investigação em Engenharia e Computação Inteligente para a Inovação e o Desenvolvimento, Portugal

Instituto Politécnico do Cávado e do Ave, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2016/09 - 2021/02 Processos híbridos baseados em Fabrico Aditivo de compósitos de matriz termoplásticareforçados com fibras longas ou contínuas
Provided by PTCRIS: SAICTPAC/0036/2015
SAICTPAC/0036/2015
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade do Minho, Portugal

Universidade de Aveiro, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
Fundação para a Ciência e a Tecnologia
Concluded

Contract

Designation Funders
2019/01/01 - Current WF-NBIOT - Wall Fit – Narrowband Internet of Things
39396
Researcher
Pólo de Inovação em Engenharia de Polímeros, Portugal
Agência Nacional de Inovação SA
Ongoing
2017/12/01 - Current Smart Composite Parts with Multifunctional Properties Ready to Fly
ESA-TEC-QEE-555
Supervisor
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
European Space Agency
Ongoing
2016/09/01 - Current FIBR3D IPC- Additive Manufacturing-Based Hybrid Process for Long or Continuous Fibre Reinforced Thermoplastic Matrix Composites
16414
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
2016/06/01 - Current TSSiPRO-Techonologies for Sustainable And Smart Innovative Products
NORTE-01-0145-FEDER-000015
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Comissao de Coordenacao e Desenvolvimento Regional do Norte
Ongoing
2021/07/01 - 2026/06/30 BE.Neutral – Agenda de Mobilidade para a neutralidade carbónica nas cidades
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Agência para a Competitividade e Inovação IP
Ongoing
2023/01/01 - 2025/12/31 HI_MOV- Via de Mobilidade Tecnológica Transfronteiriça com Hidrogénio Renovável
0160_HI_MOV_1_E
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Comissao de Coordenacao e Desenvolvimento Regional do Norte
Ongoing
2022/01/01 - 2025/12/31 NGS-NEW GENERATION STORAGE
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Agência para a Competitividade e Inovação IP
Ongoing
2021/07/01 - 2023/09/30 ZeroSkin+ - Deveçopment of 3D printed modular panel for holistic renovation of residential buildings based on recycled plastics and natural materials
NORTE 01-0145-FEDER-000058
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Comissao de Coordenacao e Desenvolvimento Regional do Norte
Concluded
2021/12/01 - 2023/06/30 Protech Mask - Desenvolvimento duma Nova Geração de Máscaras Ativas Reutilizáveis para Proteção Contra Agentes Biológicos
POCI-01-0247-FEDER-070021
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Agência Nacional de Inovação SA
Concluded
2019/08/01 - 2023/01/31 TOP4ICT - Tooling Optimization for ICT Systems
PTDC/QUI-OUT/3143/2021
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/07/01 - 2023/01/01 HYPROP
39862
Researcher
Pólo de Inovação em Engenharia de Polímeros, Portugal
Agência Nacional de Inovação SA
Ongoing
2019/07/01 - 2023/01/01 ACE
39863
Researcher
Pólo de Inovação em Engenharia de Polímeros, Portugal
Agência Nacional de Inovação SA
Ongoing
2019/01/28 - 2022/01/27 HybridPlás - Produção de produtos de valor acrescentado usando processo de moldação hibrida
NORTE-01-0247-FEDER-042954
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Agência Nacional de Inovação SA
Concluded
2019/01 - 2022/01 HybridPlás - Produção de produtos de valor acrescentado usando processo de moldação hibrida
NORTE-01-0247-FEDER-042954
Agência Nacional de Inovação SA
2018/07/01 - 2021/12/31 Sensores Inteligentes para a Condução Autónoma; Sensible Car - POCI-01-0247-FEDER-037902 ; de 2018/07/01 a 2021/12/31
POCI-01-0247-FEDER-037902
POCI-01-0247-FEDER-037902
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Agência Nacional de Inovação SA
Concluded
2019/01/01 - 2019/12/31 Institute of Nanostructures, Nanomodelling and Nanofabrication
UID/CTM/50025/2019
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Universidade do Minho, Portugal

UNINOVA Instituto de Desenvolvimento de Novas Tecnologias, Portugal

Universidade Nova de Lisboa, Portugal

Universidade de Aveiro, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal

Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/09/01 - 2019/12/31 Eco Sustainable Rail – Valorização de Plásticos Mistos no Desenvolvimento de Travessas de Caminhos de Ferro Eco Sustentável
017972
Researcher
Pólo de Inovação em Engenharia de Polímeros, Portugal
Agência Nacional de Inovação SA
Concluded
2016/05/01 - 2019/12/31 IAMAT – INTRODUCTION OF ADVANCED MATERIALS TECHNOLOGIES INTO NEW PRODUCT DEVELOPMENT FOR THE MOBILITY INDUSTRIES
MITP-TB/PFM/0005/2013
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/07/01 - 2019/06/30 DESENVOLVIMENTO DE MATERIAIS COMPÓSITOS AUXÉTICOS PARA PROTEÇÃO PESSOAL
PTDC/CTM-POL/5814/2014
Universidade do Minho, Portugal

Polícia de Segurança Pública, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/05/01 - 2019/04/30 AUXPROTECH Desenvolvimento De Materiais Compósitos Auxéticos para Proteção Pessoal
PTDC/CTMPOL/ 5814/2014
Researcher
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/01/01 - 2015/03/31 THERMOCOMPRESS - Reservatórios em Compósito para Acumulação e Transferência de Energia
2011 / 021538
Principal investigator
Vidropol, SA, Portugal
Agência Nacional de Inovação SA
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - LA 25 - 2011-2012
PEst-C/CTM/LA0025/2011
Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book
  1. Pinto, R.; Silva, H.; Duarte, F.; Nunes, J.; Gaspar-Cunha, A.. Neuroevolutionary multiobjective methodology for the optimization of the injection blow molding process. 2019.
    10.1007/978-3-030-12598-1_59
  2. Torres, L.; Nunes, J.P.; Silva, J.F.; Marques, A.T.. New PVC matrix towpregs and composites. 2008.
  3. Silva, R.F.; Silva, J.F.; Nunes, J.P.; Bernardo, C.A.; Marques, A.T.. New powder coating equipment to produce continuous fibre thermoplastic matrix towpregs. 2008.
  4. Fangueiro, R.; Nunes, J.P.; Silva, J.; Araujo, M.; Novais, F.; Fangueiro, Raúl; Nunes, J. P.; et al. Development of GF/PP towpreg woven fabrics for composite reinforcements. Trans Tech Publications Ltd. 2006.
  5. Silva, J.F.; Nunes, J.P.; Marques, A.T.. Consolidation of glass fibre-polypropylene towpregs by compression moulding. 2006.
  6. Nunes, J. P.; Hattum, F. W. J. van; Bernardo, C. A.; Brito, A. M.; Pouzada, A. S.; Silva, J. F.; Marques, A. T.; et al. Production of thermoplastic towpregs and towpreg-based composites. Springer. 2005.
Book chapter
  1. Nunes, J. P.; Costa, Artur José Teixeira; Rodrigues, Daniela Sofia Sousa; Covas, J. A.; Viana, J. C.; Pontes, A. J.; Duarte, F. M.; et al. "New material concepts". Springer, 2020.
    10.1007/978-3-030-44522-5_3
  2. Malheiro, Joana M.; Nunes, J. P.; Malheiro, Joana. Corresponding author: Malheiro, Joana M.. "Simulation of Vacuum Assisted Resin Infusion (VARI) Process for the Production of Composite Material Parts". In Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences, edited by Gaspar-Cunha A., Periaux J., Giannakoglou K.C., Gauger N.R., Quagliarella D., Greiner D., 319-340. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-57422-2_21
  3. Denysiuk, R.; Duarte, F. M. ; Nunes, J. P.; Gaspar-Cunha, A.; Duarte, F.M.; Nunes, J.P.; Denysiuk, Roman; Duarte, Fernando M.; Gaspar-Cunha, António. Corresponding author: Denysiuk, R.. "Evolving Neural Networks To Optimize Material Usage in Blow Molded Containers". In Evolutionary and Deterministic Methods for Design Optimization and Control with Applications to Industrial and Societal Problems. Computational Methods in Applied Sciences, edited by Andrés-Pérez E., González L., Periaux J., Gauger N., Quagliarella D., Giannakoglou K., 501-511. Springer International Publishing, 2019.
    Published • 10.1007/978-3-319-89890-2_32
  4. Novo, J. P.; Esfandiari, P.; Silva, J. F.; Nunes, J. P.; Marques, A. T.. "Pultrusion and compression moulding of thermoplastic pre-impregnated materials reinforced by continuous glass fibres". In Automated Composites Manufacturing (ACM4), Fourth International Symposium. DEStech Publications, Inc., 2019.
    Published
  5. Nunes, J. P.; Silva, J. F.. "Sandwiched composites in aerospace engineering". In Advanced Composite Materials for Aerospace Engineering: Processing, Properties and Applications, edited by Sohel Rana & Raul Fangueiro, 129-173. Elsevier, 2016.
    Published
  6. Silva, J. F.; Nunes, J. P.; Bernardo, C. A.; Marques, A. T.; Nunes, J. P.. "Thermoplastic Matrix Composites from Towpregs". In Advances in Composite Materials - Analysis of Natural and Man-Made Materials, 307-324. InTech, 2011.
    Published • 10.5772/18015
Conference abstract
  1. Rocha, H.; Lafont, Ugo; Nunes, J. P.. Corresponding author: Rocha, H.. "Through-Thickness Embedding Location of Optical Fibre Bragg Grating Sensors on CFRP Composites for SHM". Paper presented in 9th Annual World Congress of Advanced Materials, Tokyo, 2023.
    Published
  2. Rocha, H.; Antunes, P.; Lafont, Ugo; Nunes, J. P.. Corresponding author: Rocha, H.. "Process and Structural Health Monitoring of a Composite Overwrapped Pressure Vessel". Paper presented in Materiais 2023 – XII International Material Symposium on Materials / XXI Congresso da Sociedade Portuguesa de Materiais (SPM), Guimarães, 2023.
    Published
  3. Correia, J. M. C.; Nunes, J. P.; Viana, J. C.. Corresponding author: Correia, J. M. C.. "Novel Smart Layer Concept for Real Time Monitoring of Composite Structures". Paper presented in Materiais 2023 – XII International Material Symposium on Materials / XXI Congresso da Sociedade Portuguesa de Materiais (SPM), Guimarães, 2023.
    Published
  4. Malheiro, M. J. A; Nunes, J. P.. Corresponding author: Malheiro, M. J. A. "Multilayer Composites for Application in Bulletproof Vests". Paper presented in Multilayer Composites for Application in Bulletproof Vests, Materiais 2023 – XII International Material Symposium on Materials / XXI Congresso da Sociedade Portuguesa de Materiais (SPM), Guimarães, 2023.
    Published
  5. Fernandes, T. F.; Pontes, A. J.; Nunes, J. P.. Corresponding author: Fernandes, T. F.. "Integration of Multi-Material and Advanced Processing Concepts on a Single Moulding Step". Paper presented in Materiais 2023 – XII International Material Symposium on Materials / XXI Congresso da Sociedade Portuguesa de Materiais (SPM), Guimarães, 2023.
    Published
  6. J. P. Nunes; A. S. Pouzada; J. F. Silva; P. J. Novo; A. T. Marques. Corresponding author: J. P. Nunes. "Desenvolvimento de uma Máquina para Produção de Towpregs de Matriz Termoplástica". Paper presented in Seminário do Departamento de Polímeros, UMinho - Guimarães, 2000.
    Published
Conference paper
  1. Figueirêdo De Sá, R.; Vaz, A. I. F.; van Hattum, FWJ; César de Sá, J. M. A; Nunes, J. P.. Corresponding author: Figueirêdo De Sá, R.. "Dynamic FE Model Updating Using Particle Swarm Optimization Method: A Methodology To Design Critical Mechanical". Paper presented in 20th European Conference on Composite Materials –ECCM 20, Lausanne, 2022.
    Published
  2. Rocha, H.; Antunes, P.; Lafont, U.; Nunes, J. P.. Corresponding author: Rocha, H.. "FBG sensors for Process and Structural Health Monitoring of a Small Type III Composite Overwrapped Pressure Vessel for Unmanned Aerial Vehicle". Paper presented in 20th European Conference on Composite Materials –ECCM 20, Lausanne, 2022.
    Published
  3. Rocha, H; Christophe, F. N. F; Lafont, U.; Nunes, J. P.. Corresponding author: Rocha, H. "Electrical Impedance Tomography for Damage Detection and Localization on Carbon Fibre Reinforced Polymer Composites". Paper presented in 20th European Conference on Composite Materials –ECCM 20, Lausanne, 2022.
    Published
  4. Mucha, W.; Viana, J. C.; Nunes, J. P.. "Smart operational load monitoring using decision trees and artificial neural networks: A comparative study". Milovy, 2022.
    Published • 10.21495/51-2-269
  5. Mucha, Waldemar; Kus, Waclaw; Viana, Júlio C.; Nunes, J. P.; Mucha, W.; Kus, W.; Viana, J.C.. Corresponding author: Mucha, W.. "Comparison of numerical and experimental strain distributions in composite panel for aerospace applications". Paper presented in VI ECCOMAS Young Investigators Conference YIC2021, Valencia, 2021.
    Published • 10.4995/yic2021.2021.12572
  6. Kumar, M.; Rocha, H.; Nunes, J.P.; Pugazhenthi, G.. "Mechanical, thermal and morphological characteristics of poly(methyl methacrylate) (PMMA) nanocomposites reinforced with Cu-Cr layered double hydroxide". 2020.
  7. Novo, P.J.; Nunes, J.P.; Silva, J.F.; Marques, A.T.. "Compression molding of pultruded carbon reinforced thermoplastic composites". 2020.
  8. Rocha, H.; Kumar, M.; Nunes, J. P.. Corresponding author: Rocha, H.. "Influence of optical fiber sensor placement on CFRP laminates for process and Structural Health Monitoring". Paper presented in 22nd International Conference on Composite Materials – ICCM 22, Melbourne, 2019.
    Published
  9. Amorim, L.; Santos, A.; Nunes, J. P.; Viana, J.C.. Corresponding author: Amorim, L.. "Bioinspired Architectures Toward Improving Damage Resistance on CFRP Laminates". Paper presented in 22nd International Conference on Composite Materials – ICCM 22, Melbourne, 2019.
  10. Gonçalves, C.; Magalhães, R.; Fangueiro, Raul; Nunes, J. P.; Dias, G.R.. Corresponding author: Gonçalves, C.. "Novel Auxetic Thermoset and Thermoplastic Composites for Energy Absorption". Paper presented in 22nd International Conference on Composite Materials – ICCM 22, Melbourne, 2019.
  11. Santos, Ana; Amorim, Luís Manuel Machado; Nunes, J. P.; Rocha, Luis; Silva, A. F.; Viana, Júlio César. Corresponding author: Santos, Ana. "Strain sensors based on knocked down carbon nanotubes and bucky papers thin films". Paper presented in 8th Annual World Congress of Advanced Materials - Japan 2019, Osaka, 2019.
    Published
  12. Amorim, L.; Santos, A.; Nunes, J. P.; Viana, J.C.. Corresponding author: Amorim, L.. "A New Approach To Attenuate Low Velocity Impact Damages on CFRP Structures". Paper presented in MATCOMP’19 – Composites para la Industria 4.0,, Vigo, 2019.
  13. Amorim, Luís Manuel Machado; Santos, A; Nunes, J. P.; Viana, J.C.. Corresponding author: Amorim, Luís Manuel Machado. "Thin Veils Strategically Interleaved To Reduce Low Velocity Damages on CFRP". Paper presented in 12th International Conference on Composite Science and Technology – ICCST/12, Sorrento, 2019.
    Published
  14. de Bruijn, T.A.; Vincent, G.A.; Meuzelaar, J.; Nunes, J.P.; van Hattum, F.W.J.. "Design, manufacturing and testing of a rotorcraft access panel door from recycled carbon fiber reinforced polyphenylenesulfide". 2019.
  15. Amorim, L.; Santos, A.; Branco, M.; Infante, V.; Nunes, J.P.; Viana, J.C.. "Impact damage mitigation using bioinspired CFRP laminate architectures". 2019.
  16. Magalhães, Rui Miguel Pires; Rana, Sohel; Fangueiro, Raúl; Gonçalves, Clara Catarina Pereira; Nunes, J. P.; Dias, Gustavo R.. "Mechanical performance of composite materials developed using novel re-entrant star auxetic fibrous architectures". 2019.
  17. Magalhães, Rui; Gonçalves, Clara; Nunes, J. P.; Dias, Gustavo R.; Fangueiro, Raúl. "Impact behaviour of hybrid carbon/flax fiber reinforced composites". 2019.
  18. Gonçalves, Clara Catarina Pereira; Magalhães, Rui Miguel Pires; Rana, Sohel; Fangueiro, Raúl; Nunes, J. P.; Dias, Gustavo R.. "Characterization of auxetic and mechanical behaviours of auxetic composites developed using star knitted structures". Paper presented in Auxdefense - 1st World Conference on Advanced Materials for Defense, Lisboa, 2018.
  19. Novo, P. J.; Nunes, J. P.; Silva, João; Marques, A. T.; Silva, J. F.; Nunes, J.P.; Silva, J.F.; Marques, A.T.; Silva, João F.. "Processing of carbon reinforced thermoplastic composites". Paper presented in ICCM21 - 21th International Conference on Composite Materials, Xi´an, 2017.
    Published
  20. Keizer, Jacob; Abrantes, N. ; Alves, A.; Arroja, L.; Coelho, C.; Dias, A. C.; Gonçalves, F.; et al. "Sustainable forest management at CESAM". Paper presented in Encontro Ciência FCT, Lisboa, 2017.
    Published
  21. Sá, R. Figueirêdo de; Ferreira, R.; Gonçalves, N.; Vieira, N.; Nunes, J. P.; Hattum, F. W. J. van. Corresponding author: Sá, R. Figueirêdo de. "Finite elements versus experimental for a CFRP structure". Paper presented in 17th European Conference on Composite Materials –ECCM 17, Munich, 2016.
    Published
  22. Correia, Luís; Cunha, Fernando Eduardo Macedo; Mota, Carlos; Fangueiro, Raúl; Nunes, J. P.; Correia, L.; Cunha, F.; et al. "Pseudo-ductile Braided Composite Rods (BCRs) produced by braidtrusion". 2016.
  23. Figueirêdo De Sá, R.; Ferreira, R.; Gonçalves, N.; Vieira, N.; Nunes, J.P.; Van Hattum, F.W.J.. "Finite elements analysis versus experimental testing for a CFRP structure". 2016.
  24. P. J. Novo; J. F. Silva; J. P. Nunes; Francisco Pires; Sayed Moshen; A. Torres Marques; Nuno Correia; Ricardo Simões. "Thermoplastic composites: from raw materials and semi-products to final parts through modelling". Paper presented in 14th Japanese-European Symposium on Composite Materials, Kanazawa, 2015.
    Published
  25. Nunes, J. P.; Rodrigues, F. M.; Novo, P. J.; Silva, J. F.. "Producing LFT composite parts for large consumption markets from thermoplastic powder-coated towpregs". 2015.
  26. Novo, P. J.; Silva, J. F.; Nunes, J. P.; Marques, A. T.; Novo, P.J.; Silva, J.F.; Nunes, J.P.; Marques, A.T.. "Advances in thermoplastic pultruded composites". 2015.
  27. Melo, David Emanuel Vale; Nunes, J. P.; Vasconcelos, M.. "Development of a new U 200 pultrusion die to produce GRP composite profiles using different thermosetting resins". 2015.
  28. Nunes, J.P.; Melo, D.; Vasconcelos, M.; Nunes, J. P.; Melo, David Emanuel Vale. "Using a new developed die and different types of thermosetting resins to produce U200 profiles by pultrusion". 2015.
  29. Novo, P. J.; Silva, J. F.; Nunes, J. P.; Marques, A. T.; Novo, P.J.; Silva, J.F.; Nunes, J. P.; Marques, A.T.. "Optimizing the production and processing of fibre reinforced thermoplastic pre-impregnated materials". Paper presented in 16th European Conference on Composite Materials, Seville, 2014.
    Published
  30. Nunes, J. P.; Novo, P.J.; Silva, J.F.; Marques, A.T.; Nunes, J. P.; Novo, P. J.; Silva, J. F.; Marques, A. T.. Corresponding author: Nunes, J. P.. "Production and processing of thermoplastic based towpregs for commercial and advanced markets". Paper presented in 16th European Conference on Composite Materials, Seville, 2014.
    Published
  31. P. J. Novo; J. P. Nunes; J F. Silva; A. T. Marques. Corresponding author: P. J. Novo. "Processing by pultrusion of fibre reinforced thermoplastic pre impregnated materials". Paper presented in 12th World Pultrusion Conference, EPTA, Lisbon, 2014.
  32. Barros, B.; Oliveira, L.; Nunes, J. P.. "Development of a laboratorial robotized filament winding equipment". 2014.
  33. Sá, Ricardo; Nunes, J. P.; Oliveira, L.; Hattum, F. W. J. van; Sá, J. M. A. César de. "Redesign of machine component in polymeric matrix composite towards increased productivity". 2014.
  34. Novo, P. J.; Silva, J. F.; Nunes, J. P.; Marques, A. T.. "Advanced thermoplastic carbon fibre reinforced pultruded composites". 2014.
  35. Oliveira, Luís; Nunes, J. P.; Ferreira, F.. "Improving the vacuum-infusion process to manufacture high quality structural composite for the aeronautic market". 2014.
  36. Simões, Carla L.; Nunes, J. P.; Bernardo, C. A.; Vasconcelos, M.. "Using a glass-fibre reinforced polymer composite in the production of sustainable water storage vessels". 2014.
  37. Figueirêdo De Sá, R.; Van Hattum, F.W.J.; Césarde Sá, J.M.A.; Oliveira, L.; Nunes, J.P.; Sá, Ricardo; Hattum, F. W. J. van; Sá, J. M. A. César de; Nunes, J. P.. "Redesign of an industrial laser cutting machine's gantry in composite material". 2014.
  38. Oliveira, L.; Fazenda, R.; Santos, I.; Vasconcelos, M.; Barros, B.; Amorim, L.; Nunes, J.P.; Silva, J.F.. "Producing filament wound composite pressure vessels for commercial applications". 2014.
  39. Tinoco, V.; Novo, Paulo; Nunes, J. P.; Silva, J. F.; Marques, A. T.. "Production of thermoplastic matrix pre-impregnated materials to manufacture composite pultruded profiles". 2013.
  40. Duro, A. C.; Castro, B. F.; Silva, J. F.; Nunes, J. P.. "Processing and properties of composites obtained from natural fibres and thermosetting matrices". 2013.
  41. Santos, M. S.; Nunes, J. P.; Silva, J. F.; Novo, Paulo; Marques, A. T.. "Comparing the performance of different thermoplastic matrix pre-impregnated materials". 2013.
  42. Silva, J. F.; Nunes, J. P.; Duro, A. C.; Castro, B. F.; Silva, J.F.; Nunes, J.P.; Duro, A.C.; Castro, B.F.. "Processing and properties of natural fibers reinforced thermoplastic and thermosseting composites". 2013.
  43. Nunes, J. P.; Silva, J. F.; Novo, Paulo; Marques, A. T.; Nunes, J.P.; Silva, J.F.; Santos, M.S.; Novo, P.J.; Marques, A.T.. "Processing conditions and properties of continuous fiber reinforced GF/PP thermoplastic matrix composites manufactured from different pre-impregnated materials". 2013.
  44. Nunes, J. P.; Oliveira, Luís; Silva, J. F.; Barros, B.; Amorim, Luís Manuel Machado; Vasconcelos, M.; Oliveira, L.; et al. "Composite pressure vessels for commercial applications". 2013.
  45. Nunes, J. P.; Castro, B. F.; Duro, A. C.; Silva, J. F.; Oliveira, Luís. "Development and assessment to environmentally friendly natural fiber composites". 2013.
  46. Camboa, André; Ribeiro, Bernardo Sousa; Nunes, J. P.; Alves, Jorge Lino. "A mechanical analysis of polydicyclopentadiene with metal inserts through flexural load". 2013.
  47. Silva, J. F.; Nunes, J. P.; Marques, A. T.; Silva, J.F.; Nunes, J.P.; Marques, A.T.. "Filament wound products made with thermoplastic matrix towpregs". 2012.
  48. Novo, P.J.; Silva, J.F.; Nunes, J.P.; Van Hattum, F.W.J.; Marques, A.T.; Novo, P. J.; Silva, J. F.; et al. "Development of a new pultrusion equipment to manufacture thermoplastic matrix composite profiles". 2012.
  49. Vieira, D. G.; Meireles, José F.; Nunes, J. P.. "Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame". 2011.
    10.4028/www.scientific.net/MSF.730-732.349
  50. Vieira, D. G.; Meireles, José F.; Nunes, J. P.; Silva, Lucas F.. "Substituting conventional steel alloys by carbon fibre composites in structural parts of an existing laser cutting equipment". 2011.
  51. Nunes, J. P.; Silva, J. F.. "Production of thermoplastic matrix towpregs for higly demanding and cost - effective commercial applications". 2011.
    10.4028/www.scientific.net/MSF.730-732.1030
  52. Velosa, J. C.; Nunes, J. P.; Silva, J. F.; Bernardo, C. A.; Marques, A. T.. "Production of thermoplastic towpregs". 2010.
    10.4028/www.scientific.net/MSF.636-637.220
  53. Nunes, J.P.; Silva, J.F.; Antunes, P.J.. "Domestic gas cylinders manufactured by using a composite hybrid steel glass reinforced thermoplastic matrix solution". 2010.
    10.1115/PVP2010-25822
  54. Silva, J.F.; Nunes, J.P.; Velosa, J.C.. "Using thermoplastic (HDPE) liners and glass fiber reinforced thermosetting and thermoplastic structural wall matrices to produce filament wound pressure vessels". 2010.
    10.1115/PVP2010-25826
  55. Torres, L. M.; Silva, J. F.; Marques, A. T.; Nunes, J. P.; Marques, R. P.. Corresponding author: Torres, L. M.. "Glass/polyvinyl chloride composites". Paper presented in V International Symposium MATERIAIS 2009, Lisbon, 2009.
    Published • 10.4028/www.scientific.net/MSF.636-637.214
  56. Cabral-Fonseca, S.; Nunes, J.P.; Rodrigues, M.P.; Eusébio, M.I.. "Durability of epoxy adhesives used to bond CFRP laminates to concrete structures". 2009.
  57. Silva, J.F.; Nunes, J.P.; Velosa, J.C.; Bernardo, C.A.; Marques, A.T.. "Thermoplastic matrix towpreg production". 2009.
  58. Nunes, J.P.; Silva, J.F.; Ferreira, J.C.; Marques, A.T.. "New composite poles for electrical lighting, transport and distribution". 2009.
  59. Silva, J.F.; Nunes, J.P.; Velosa, J.C.; Bernardo, C.A.; Marques, A.T.. "Thermoplastic matrix towpreg production". 2009.
  60. Nunes, J.P.; Velosa, J.C.; Antunes, P.J.; Silva, J.F.; Marques, A.T.. "Studying the production of filament wound composite pressure vessels". 2007.
  61. Silva, J.F.; Correia, S.M.; Monteiro, J.; Nunes, J.P.; Marques, A.T.. "Study of damage in filament wound thermoplastic matrix composite pipes". 2007.
  62. Fazenda, R.; Silva, J.F.; Nunes, J.P.; Bernardo, C.A.. "New coating equipment to produce long fibre thermoplastic matrix towpregs at industrial scale". 2007.
  63. Nunes, J.P.; Antunes, P.; Dias, G.R.; Silva, J.F.. "Design of thermoplastic matrix hybrid composite gas cylinders for domestic applications". 2007.
  64. Eires, R.; Nunes, J. P.; Fangueiro, Raúl; Jalali, Said; Camões, Aires. "New eco-friendly hybrid composite materials for civil construction". 2006.
  65. Silva, J. F.; Nunes, J. P.; Marques, A. T.. "Consolidation of glass fiber-polypropylene towpregs by compression moulding". 2006.
  66. Fangueiro, Raul; Nunes, J. P.; Silva, J. F.; Araújo, M.; Novais, F.. "Development of GF/PP towpreg woven fabrics for composite reinforcement". Paper presented in XII Portuguese Materials Society Meeting and III International Materials Symposium - Materiais 2005, Aveiro, 2005.
  67. Nunes, J.P.; Silva, J.F.; Marques, A.T.. "Using additives to improve the properties of composites made from towpregs". 2005.
  68. Nunes, J.P.; Silva, J.F.; Marques, A.T.. "Consolidation of glass-fiber/polypropylene towpregs by compression molding". 2005.
  69. Fangueiro, Raul; Novais, F.; Nunes, J. P.; Silva, J. F.; Hattum, F.; Vieira, P.; Araújo, M.. "GF/PP Woven Fabrics Produced with Powder Coated Thermoplastic Matrix Towpregs". Paper presented in AUTEX 2004 ¿ 4th World Textile Conference, Roubix, 2004.
  70. Nunes, J.P.; Silva, J.F.; Van Hattum, F.W.J.; Marques, A.T.. "Filament winding processing conditions to produce thermoplastic composites from towpregs". 2004.
Journal article
  1. Amorim, L.; Santos, A.; Nunes, J. P.; Viana, J. C.. "Low velocity impact study of vacuum bag infused bouligand inspired composites". Polymer Composites (2024): http://dx.doi.org/10.1002/pc.28982.
    10.1002/pc.28982
  2. Amorim, Luís; Santos, A.; Nunes, J. P.; Dias, G.; Viana, J. C.. "A Novel Strategical Approach to Mitigate Low Velocity Impact Damage in Composite Laminates". Polymer Composites (2024): https://doi.org/10.1002/pc.28463.
    Open access • Published • https://doi.org/10.1002/pc.28463
  3. Rocha, Helena; Antunes, Paulo; Lafont, Ugo; Nunes, J. P.. "Processing and structural health monitoring of a composite overwrapped pressure vessel for hydrogen storage". Structural Health Monitoring (2023): http://dx.doi.org/10.1177/14759217231204242.
    Published • 10.1177/14759217231204242
  4. Mucha, W; Kokot, G; Viana, J C; Nunes, J. P.. "New Operational Load Monitoring Approach Using Digital Image Correlation and Image Classification Networks". Journal of Physics: Conference Series 2512 1 (2023): 012015. http://dx.doi.org/10.1088/1742-6596/2512/1/012015.
    Published • 10.1088/1742-6596/2512/1/012015
  5. Santos, A.; Amorim, L.; Nunes, J. P.; Silva, A.F.; Viana, J.C.. "Carbon nanotubes based multi-directional strain sensor". Materials Science and Engineering: B 285 (2022): 115937. http://dx.doi.org/10.1016/j.mseb.2022.115937.
    Published • 10.1016/j.mseb.2022.115937
  6. Rocha, Helena; Fernandes, Christophe; Ferreira, Nelson; Lafont, Ugo; Nunes, J. P.. "Damage localization on CFRP composites by electrical impedance tomography". Materials Today Communications 32 (2022): 104164. http://dx.doi.org/10.1016/j.mtcomm.2022.104164.
    Open access • 10.1016/j.mtcomm.2022.104164
  7. Esfandiardi, P.; Silva, J. F.; Novo, P. J.; Nunes, J. P.; Marques, A. T.; Esfandiari, Puria; Silva, João Francisco; Novo, Paulo Jorge; Marques, Antonió Torres. Corresponding author: Esfandiardi, P.. "Production and Processing of Pre-impregnated Thermoplastic Tapes by Pultrusion and Compression Moulding". Journal of Composite Materials 56 11 (2022): 1667-1676. http://dx.doi.org/10.1177/00219983221083841.
    Accepted • 10.1177/00219983221083841
  8. Helena Rocha; Ugo Lafont; João P. Nunes; Rocha, H.; Lafont, U.; Nunes, J. P.. Corresponding author: Rocha, H.. "Optimisation of Through-Thickness Embedding Location of Fibre Bragg Grating Sensor in CFRP for Impact Damage Detection". Polymers 13 18 (2021): 3078-3078. https://doi.org/10.3390/polym13183078.
    Published • 10.3390/polym13183078
  9. Amorim, L.; Santos, A.; Nunes, J. P.; Dias, G.R.; Viana, J.C.. Corresponding author: Amorim, L.. "Quasi static mechanical study of vacuum bag infused bouligand inspired composites". Polymer Testing 100 (2021):
    Published
  10. Ana Raquel Santos; Luis Amorim; Joao Pedro Nunes; Alexandre F. Silva; Julio C. Viana. "Aligned Carbon Nanotube-Based Sensors for Strain Monitoring of Composites". IEEE Sensors Journal 21 13 (2021): 14718-14725. https://doi.org/10.1109/JSEN.2021.3070927.
    10.1109/JSEN.2021.3070927
  11. Rocha, H.; Semprimoschnig, C.; Nunes, J. P.. Corresponding author: Rocha, H.. "Sensors for Process and Structural Health Monitoring of Aerospace Composites: A review". Engineering Structures (2021):
    Published
  12. Rocha, H.; Semprimoschnig, C.; Nunes, J. P.. Corresponding author: Rocha, H.. "Small-Diameter Optical Fibre Sensor Embedment for Ambient Temperature Cure Monitoring and Residual Strain Evaluation of CFRP Composite Laminates Produced by Vacuum Assisted Resin Infusion". CEAS Space Journal (2021): https://doi.org/10.1007/s12567-021-00357-5.
  13. Amorim, L.; Santos, A.; Nunes, J. P.; Viana, J.C.. Corresponding author: Amorim, L.. "Bioinspired Approaches for Toughening of Fibre Reinforced Polymer Composites". Materials & Design 199 (2021): https://doi.org/10.1016/j.matdes.2020.109336.
    Published
  14. Mucha, W.; Kus, W.; Viana, J.C.; Nunes, J. P.. Corresponding author: Mucha, W.. "Operational Load Monitoring of a Composite Panel Using Artificial Neural Networks". Sensors 20 9 (2020): 2534. https://doi.org/10.3390/s20092534.
    Published
  15. de Bruijn, T.A.; Vincent, G.A.; Meuzelaar, J.; Nunes, J. P.; Van Hattum, F.W.J.. Corresponding author: de Bruijn, T.A.. "Design, Manufacturing and Testing of a Rotorcraft Access Panel Door from Recycled Carbon Fiber Reinforced Polyphenylenesulfide". SAMPE Journal Mar/April (2020):
    Published
  16. Nunes, João; Santos, Ana; Amorim, Luís; Nunes, João Pedro; Rocha, Luís Alexandre; Silva, Alexandre Ferreira; Viana, Júlio César. "A Comparative Study between Knocked-Down Aligned Carbon Nanotubes and Buckypaper-Based Strain Sensors". Materials 12 12 (2019): 2013. http://dx.doi.org/10.3390/ma12122013.
    10.3390/ma12122013
  17. Nunes, João. "Aligned carbon nanotube based sensors for strain sensing applications". Sensors and Actuators A: Physical (2019): http://dx.doi.org/10.1016/j.sna.2019.02.026.
    10.1016/j.sna.2019.02.026
  18. Denysiuk, R.; Gonçalves, N.; de Souza Pinto, R.; Silva, H.; Duarte, F.; Nunes, J.; Gaspar-Cunha, A.; Pinto, R.; Nunes, J. P.. "Optimization of injection stretch blow molding: Part I – Defining part thickness profile". International Polymer Processing 34 3 (2019): 314-323. http://www.scopus.com/inward/record.url?eid=2-s2.0-85069812881&partnerID=MN8TOARS.
    10.3139/217.3746
  19. Gonçalves, C; Magalhães, R; Rana, S; Fangueiro, R; Nunes, J. P.; Dias, G. "Novel high performance auxetic fibrous structures for composite reinforcement". IOP Conference Series: Materials Science and Engineering 406 (2018): 012046. http://dx.doi.org/10.1088/1757-899x/406/1/012046.
    10.1088/1757-899x/406/1/012046
  20. Novo, P. J; Silva, J. S.; Nunes, J. P.; Marques, A. T.; Novo, P.J.; Silva, J.F.; Nunes, J.P.; Marques, A.T.; Silva, João. "Pultrusion of fibre reinforced thermoplastic pre-impregnated materials". (2016): http://hdl.handle.net/1822/39419.
    10.1016/j.compositesb.2015.12.026
  21. Nunes, João; Simões, C.L.; Vasconcelos, M.; Nunes, J.P.; Bernardo, C.A.. "Using a glass-fibre reinforced polymer composite in the production of sustainable water storage tanks". International Journal of Materials and Product Technology 52 1-2 (2016): 162-175. http://dx.doi.org/10.1504/ijmpt.2016.073628.
    10.1504/ijmpt.2016.073628
  22. Novo, P. J.; Silva, J. F.; Nunes, J. P.; Marques, A. T.. "Compósitos avançados de matriz termoplástica reforçada com fibras de carbono obtidos por pultrusão". (2014): http://hdl.handle.net/1822/53340.
  23. Novo, P.J.; Nunes, J.P.; Silva, J.F.; Tinoco, V.; Marques, A.T.. "Production of thermoplastics matrix preimpregnated materials to manufacture composite pultruded profiles". Ciencia e Tecnologia dos Materiais 25 2 (2013): 85-91. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901435125&partnerID=MN8TOARS.
    10.1016/j.ctmat.2014.03.004
  24. Nunes, J.P.; Silva, J.F.; Novo, P.J.. "Processing thermoplastic matrix towpregs by pultrusion". Advances in Polymer Technology 32 SUPPL.1 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84875512524&partnerID=MN8TOARS.
    10.1002/adv.21279
  25. Camboa, A.; Silva, H.; Teixeira, A.; Ribeiro, B.; Nunes, J.. "Hybrid design for automotive body panels". SAE Technical Papers (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84877180234&partnerID=MN8TOARS.
    10.4271/2012-01-0746
  26. Vieira, D.G.P.; Meireles, J.F.; Nunes, J.P.; Da Silva, L.F.M.. "Substituting conventional steel alloys by carbon fibre composites in structural parts of an existing laser cutting equipment". Materialwissenschaft und Werkstofftechnik 43 5 (2012): 468-478. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861618857&partnerID=MN8TOARS.
    10.1002/mawe.201200983
  27. Cabral-Fonseca, S.; Nunes, J. P.; Rodrigues, M. P.; Eusébio, M. I.; Nunes, J.P.; Rodrigues, M.P.; Eusébio, M.I.. "Durability of carbon fibre reinforced polymer laminates used to reinforced concrete structures". Science and Engineering of Composite Materials 18 4 (2011): 201-207. http://repositorio.lnec.pt:8080/jspui/handle/123456789/1003276.
    10.1515/SECM.2011.041
  28. Silva, J. F.; Nunes, J. P.; Velosa, J. C.; Bernardo, C. A.; Marques, A. T.. "Thermoplastic matrix towpreg production". (2010): http://hdl.handle.net/1822/13263.
    10.1002/adv.20174
  29. Fangueiro, Raúl; Nunes, J. P.; Soutinho, Hélder Filipe Cunha; Araújo, Mário Duarte de. "Development of fibrous preforms for frp tube connections". (2009): http://hdl.handle.net/1822/17949.
    10.1016/j.compscitech.2008.09.020
  30. Velosa, J. C.; Nunes, J. P.; Antunes, P. J.; Silva, J. F.; Marques, A. T.. "Development of a new generation of filament wound composite pressure cylinders". (2009): http://hdl.handle.net/1822/13287.
    10.1016/j.compscitech.2008.09.018
  31. Nunes, J.P.; Silva, J.F.; Velosa, J.C.; Bernardo, C.A.; Marques, A.T.. "New thermoplastic matrix composites for demanding applications". Plastics, Rubber and Composites 38 2-4 (2009): 167-172. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649223764&partnerID=MN8TOARS.
    10.1179/174328909X387946
  32. Antunes, P. J.; Dias, Gustavo R.; Nunes, J. P.; Hattum, F. W. J. van; Oliveira, T.. "Finite element modelling of thermoplastic matrix composite gas cylinders". (2008): http://hdl.handle.net/1822/18126.
    10.1177/0892705708089484
  33. Silva, J. F.; Nunes, J. P.; Marques, A. T.; Bernardo, C. A.; Vieira, P.; Vasconcelos, M.. "Novos termoplásticos reforçados com fibras longas". (2008): http://hdl.handle.net/1822/17673.
  34. Silva, J.F.; Nunes, J.P.; Vieira, P.; Marques, A.T.. "GF/PP towpregs production, testing and processing". International Journal of Mechanics and Materials in Design 4 2 (2008): 205-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-43249116713&partnerID=MN8TOARS.
    10.1007/s10999-007-9050-2
  35. Cruz, P.J.S.; Diaz De Léon, A.; Nunes, J.P.; Leung, C.K.Y.. "Design and mechanical characterization of fibre optic plate sensor for crack monitoring". Sensors and Materials 18 6 (2006): 283-299. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846159783&partnerID=MN8TOARS.
  36. Hattum, F. W. J. van; Nunes, J. P.; Bernardo, C. A.. "A theoretical and experimental study of new towpreg-based long fibre thermoplastic composites". (2005): http://hdl.handle.net/1822/12564.
    10.1016/j.compositesa.2004.06.031
  37. Montes-Morán, M. A.; Hattum, F. W. J. van; Nunes, J. P.; Martínez-Alonso, A.; Tascón, J. M. D.; Bernardo, C. A.; Montes-Morán, M.A.; et al. "A study of the effect of plasma treatment on the interfacial properties of carbon ¿bre–thermoplastic composites". Carbon 43 8 (2005): 1795-1799. http://hdl.handle.net/1822/3607.
    10.1016/j.carbon.2005.02.005
  38. Nunes, J.P.; Van Hattum, F.W.J.; Bernardo, C.A.; Silva, J.F.; Marques, A.T.. "Advances in thermoplastic matrix towpregs processing". Journal of Thermoplastic Composite Materials 17 6 (2004): 523-544. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442489063&partnerID=MN8TOARS.
    10.1177/0892705704038470
  39. Nunes, J. P.; Silva, J. F.; Marques, A. T.; Crainic, N.; Fonseca, S. Cabral; Nunes, J.P.; Silva, J.F.; Marques, A.T.; Cabral-Fonseca, S.. "Production of powder coated towpregs and composites". Journal of Thermoplastic Composite Materials 16 3 (2003): 231-248. http://hdl.handle.net/1822/106.
    10.1177/089270503025872
  40. Cabral-Fonseca, S.; Paiva, M.C.; Nunes, J.P.; Bernardo, C.A.. "A novel technique for the interfacial characterisation of glass fibre-polypropylene systems". Polymer Testing 22 8 (2003): 907-913. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141986508&partnerID=MN8TOARS.
    10.1016/S0142-9418(03)00039-4
  41. Nunes, J. P.; Pouzada, A. S.; Bernardo, C. A.. "The use of a three-point support flexural test to predict the stiffness of anisotropic composite plates in bending". (2002): http://hdl.handle.net/1822/239.
    10.1016/S0142-9418(01)00040-X
  42. Nunes, J.P.; Pouzada, A.S.; Bernardo, C.A.. "Erratum: The use of a three-point support flexural text to predict the stiffness of anisotropic composit plares in bending (Polymer Testing PII: S014294180100040X)". Polymer Testing 21 7 (2002): http://www.scopus.com/inward/record.url?eid=2-s2.0-0036298047&partnerID=MN8TOARS.
    10.1016/S0142-9418(02)00040-5
  43. Nunes, J.P.; Brito, A.M.; Pouzada, A.S.; Bernardo, C.A.. "Isothermal and non-isothermal consolidation of carbon fiber towpregs". Polymer Composites 22 1 (2001): 71-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035244930&partnerID=MN8TOARS.
    10.1002/pc.10518
  44. Nunes, J.P.; Bernardo, C.A.; Pouzada, A.S.; Edie, D.D.. "Modeling of the consolidation of polycarbonate/carbon fiber towpregs". Polymer Composites 20 2 (1999): 260-268. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033116690&partnerID=MN8TOARS.
  45. Nunes, J.P.; Bernardo, C.A.; Pouzada, A.S.; Edie, D.D.. "Formation and characterization of carbon/polycarbonate towpregs and composites". Journal of Composite Materials 31 17 (1997): 1758-1777. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031370197&partnerID=MN8TOARS.
Thesis / Dissertation
  1. Vieira, Abílio José Araújo. "Pultrusão de perfis para aplicações avançadas a partir de towpregs de elevado desempenho". Master, 2015. http://hdl.handle.net/1822/36653.
Working paper
  1. Nunes, J. P.; Silva, J. F.; Novo, Paulo. 2011. "Processing thermoplastic matrix towpregs by pultrusion". http://hdl.handle.net/1822/14833.

Intellectual property

Patent
  1. Correia, Pedro; Nunes, J. P.; Brito, A. M.; Freitas, Luís Miguel Capela Pereira Leite; Pimentel, Anthony Michael Fernandes; Noversa, João Tiago Gomes; Alves, Tiago Samuel Freitas. 2020. "Assembly workstation and installation method thereof". Portugal.
    Granted/Issued
  2. Brito, A. M.; Correia, P.; Freitas, L. M.; Pimentel, A. M.; Noversa, J. T.; Nunes, J. P.; Alves, T. S.; et al. 2020. "Impregnation Device to Produce Continuous Reinforced Thermoplastic Filaments for 3D Printing and Impregnation Method Thereof".
    Granted/Issued
  3. Ferreira, J. C.; Nunes, J. P.; Silva, J. F.; Marques, A. T.. 2010. "Pole in Thermoplastic Matrix Composite".
    Granted/Issued
  4. Ferreira, J. C.; Nunes, J. P.; Silva, J. F.; Marques, A. T.. 2008. "Postes Inteligentes em Compósito de Matriz Termoplástica ou Termoendurecível". Portugal.
    Granted/Issued
  5. Mota, J. N.; Nunes, J. P.; Pouzada, A. S.. 2001. "Pultrusion Head to Produce Long Fibre Reinforced Thermoplastic Matrix Profiles".
    Granted/Issued
  6. Nunes, J. P.; Silva, J. F.; Silva, L.; Novo, P. J.; Marques, A. T.. 2001. "Equipment to Produce Continuously Powder Coated Thermoplastic Matrix Prepregs (Towpregs)".
    Granted/Issued
  7. Nunes, J. P.; Silva, J. F.; Silva, L.; Novo, P. J.; Marques, A. T.. 2000. "Máquina para Produção em Contínuo de Mechas de Fibras Pré impregnadas com Termoplástico em Pó". Portugal.
    Granted/Issued
  8. Mota, J. N.; Nunes, J. P.; Pouzada, A. S.. 2000. "Cabeça de Pultrusão de Perfis em Termoplástico Reforçado com Fibras Longas". Portugal.
    Granted/Issued
Distinctions

Award

2022 Reconhecimento de Elevado Mérito Científico de Publicação Científica em Revistas de Qualidade Internacional no biénio 2021-2022
Universidade do Minho Escola de Engenharia, Portugal
2018 “Best Poster Award” na 18th European Conference on Composite Materials
ESCM- European Society for Composite Materials, Greece
2005 Prémio "THE SPIRIT OF CONQUEST" atribuído mas Jornadas Europeias de Materiais Compósitos de 2005 “2005 JEC-COMPOSITES”
JEC Group, France