???global.info.a_carregar???
Paulo M. S. T. de Castro obtained a first degree in Mechanical Engineering from the Faculty of Engineering of the Universidade do Porto (FEUP) in 1973, a master's degree from Imperial College London in 1977 and a PhD from Cranfield Institute of Technology (now Cranfield University) in 1980. He is currently emeritus professor of the Universidade do Porto, after retiring as full professor of the Mechanical Engng. Depart. of FEUP in 2020. His research interests are mainly in the field of fatigue, fracture and structural integrity, particularly of aerostructures. Through a number of r&d projects funded by the European Union (EU), a part of his research in recent years is related to mechanical behaviour of structural connections, including adhesive, riveted and welded. Professor de Castro has been involved in several national and international scientific and professional associations, such as ASME where he was a member of the Board on Professional Practice and Ethics, EASN (European Aeronautics Science Network), TWI, IOM3, SEFI and Ordem dos Engenheiros, among others. He is a corresponding member of the Lisbon Academy of Sciences and a member of the editorial board of the journals Fatigue and Fracture of Engineering Materials and Structures, International Journal of Structural Integrity, Mechanika, UPB Scientific Bulletin Series D: Mechanical Engineering, among others. He had sabbaticals as Fulbright Scholar at the University of California at Berkeley, and as visiting scholar at Lehigh University, and presented invited lectures at Imperial College London, Lehigh University, Univ. California at Berkeley, Univ. of Maryland and Univs. Federal of Rio de Janeiro, Coimbra, Lille, Napoli, and Salerno, among others. He was professeur invité of the Université des Sciences et Technologies de Lille, and consultant for Univ. Eduardo Mondlane of Mozambique. He has a diversified experience as evaluator of R&D for the EU and several national organizations (Germany, Italy, South Africa, etc.), and of monitor for EU programmes or projects, including the recent large aeronautics project LOCOMACHS. He was a member of the Scientific Committee of the EU programme Clean Sky 2 in 2018-2021. His university management activities at FEUP included being director of the degree in Mechanical Engineering (pre-Bologna), of the doctoral program in Mechanical Engineering, and of the Department of Mechanical Engineering twice. He was a member of the board of directors of the Portuguese Innovation Agency (Agência de Inovação) since the creation of this organization in 1993 until 1996. Paulo M. S. T. de Castro is researcher ORCID http://orcid.org/0000-0003-3202-1343 and author ID: 57205718522 in the SCOPUS database which includes, as of today, 160 publications of which he is author or co-author, with an h index of 28.
Read full resume ↓
Identification

Personal identification

Full name
Paulo Manuel Salgado Tavares de Castro

Citation names

  • de Castro, Paulo
  • Paulo M. S. T. de Castro
  • Paulo T. de Castro
  • Paulo Tavares de Castro

Author identifiers

Ciência ID
F91C-6BFD-58D0
ORCID iD
0000-0003-3202-1343
Researcher Id
I-8164-2015
Scopus Author Id
57205718522

Knowledge fields

  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
French Intermediate (B1) Intermediate (B1) Beginner (A1) Intermediate (B1)
Spanish; Castilian Beginner (A1) Intermediate (B1) Beginner (A1) Beginner (A1)
Education
Degree Classification
1997
Concluded
 não aplicável ... (Título de Agregado)
Universidade do Porto Faculdade de Engenharia, Portugal
 unanimidade do juri
1980
Concluded
 não aplic (Doctor of Philosophy)
Cranfield University, United Kingdom
"Fracture mechanics of the elastic plastic crack growth in a structural steel" (THESIS/DISSERTATION)
 não aplic
1976
Concluded
 Master of Science in Applied Mechanics (Master)
Imperial College London Department of Mechanical Engineering, United Kingdom
"Elastic plastic crack growth" (THESIS/DISSERTATION)
 não aplic
1973
Concluded
 Engenharia Mecânica (Licenciatura)
Universidade do Porto Faculdade de Engenharia, Portugal
 16
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
1998 - 2020/08/04 Full Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
1984/08/17 - 1998 Associate Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
1981/05/11 - 1984 Assistant Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal

Others

Category
Host institution 		Employer
2020/08/04 - Current Professor Emérito Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
2009/05/01 - 2009/05/31 Invited Professor, May 2009; Université de Lille, France
2007/05 - 2007/05 Professeur Invité Université de Lille, France
2000/04 - 2000/07 Visiting Fulbright Scholar, University of California, Berkeley, USA (durante sabático) Universidade do Porto Faculdade de Engenharia, Portugal
1992/04 - 1992/07 Research Associate, University of California, Berkeley, USA, Apr.1992-Jul.1992 Universidade do Porto Faculdade de Engenharia, Portugal
1991/11 - 1992/04 Visiting Scholar, Lehigh University, USA, Nov 1991-Apr 1992 (durante sabático) Universidade do Porto Faculdade de Engenharia, Portugal
Projects

Contract

Designation Funders
2018/07/26 - 2021/07/25 Melhoria de propriedades mecânicas em componentes obtidos por fabrico aditivo
PTDC/EME-APL/31307/2017
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2012/04/01 - 2015/08/31 Metodologia numerico-experimental para determinação do factor intensidade de tensão
PTDC/EME-TME/120331/2010
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/04/01 - 2015/08/31 Técnica inovadora híbrida de soldadura por fricção linear com adesivo
PTDC/EME-TME/117596/2010
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013 - 2015 Cross car beam - CCB 360
contract: 23032
Researcher
2011/03/01 - 2014/05/31 SFL, optimização e previsão do comportamento mecânico de juntas através do método de Taguchi e Redes Neuronais
PTDC/EME-TME/114703/2009
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/03/01 - 2013/08/27 Railways - rolling contact fatigue
PTDC/EME-PME/100204/2008
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/03/01 - 2013/03/31 Aumento da tenacidade de adesivos com micro partículas de cortiça
PTDC/EME-TME/098752/2008
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012 - 2012 Estrado em alumínio para carruagens de passageiros
Proj. 21526
Researcher
2008/01/01 - 2011/06/30 Metodologias avançadas de avaliação do comportamento dinâmico de pontes ferroviárias em linhas de alta velocidade
PTDC/ECM/69697/2006
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Departamento de Engenharia Civil, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/08/01 - 2010/10/31 Comportamento à Fadiga de Ligações Rebitadas em Pontes Metálicas Antigas
PTDC/EME-PME/78833/2006
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007 - 2010 New design concepts for aeronautical products welded by friction stir
MIT-Portugal program
Principal investigator
Concluded
2007/07/01 - 2009/12/31 WELDING - Sensores de Bragg em fibra óptica para a modelação de fricition stir welding FSW e laser beam welding LBW
PTDC/EME-TME/66362/2006
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2008 - 2009 Damage tolerance of cryogenic pressure vessels
ESA
Researcher
Concluded
2005 - 2009 Innovative fatigue and damage tolerance methods for the application of new structural concepts - DATON
proposal number FP6-516053
 European Commission
Concluded
2007/11/01 - 2008/12/31 European Rail Research Network of Excellence EURNEX
POCI/V.5/C0006/2005
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2007/01/01 - 2008/12/31 Advanced Passive Safety Network
POCI/V.5/C0005/2005
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2005/06/01 - 2008/05/31 Avaliação da Integridade Estrutural de Pontes Metálicas Ferroviárias
POCI/ECM/57286/2004
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Departamento de Engenharia Civil, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2000 - 2005 Advanced Design Concepts and Maintenance by Integrated Risk Evaluation for Aerostructures - ADMIRE
contrato G4RD-CT-2000-00396
Researcher
European Commission
Concluded
1998 - 2000 Railcrack - Fatigue crack growth qualifying criteria of rails for railways
contract SMT4-CT98-2240
Researcher
European Commission
Concluded
1999 - 1999 Feasibility study for the introduction of credit system arrangement in the Universidade Eduardo Mondlane
contract RFP No. 010/TPCU/VRAC/UEM/1998
Principal investigator
Concluded
1996 - 1998 Structural maintenance of ageing aircraft - SMAAC
BRITE-EURAM project BE95-1053
Researcher
Concluded
1989 - 1994 Design of Aluminium Structures under Fatigue Loading
EUREKA project EU269
Researcher
Concluded
1988 - 1991 Fibre Reinforced Composite with Modified Cementitious Matrix
project RI 1B-0226-C(CD)
Researcher
European Commission
Concluded
1987 - 1990 Aplicação da Mecânica da Fractura aos Materiais Compósitos
JNICT contrato 848.86.52/MATR
Principal investigator
1988 - 1988 Aplicação da Mecânica da Fractura à caracterização do comportamento de compósitos
Contrato nº CI-12-86/87
Principal investigator
Universidade do Porto
1987 - 1987 Aplicação da Mecânica da Fractura à caracterização do comportamento de compósitos
Contrato nº CI-12/86
Principal investigator
Universidade do Porto
Concluded

Other

Designation Funders
1995 - 1998 Fracture toughness of steel in the ductile to brittle transition regime
EC M&T project no. MAT CT940080
Researcher
European Commission
Concluded
1987 - 1990 BCR - Community Bureau of Reference, 'Intercomparison of Fracture Toughness Measurements of Ductile Materials', round robin programme
3120/1/0/111/86/11-BCR-UK
Researcher
Concluded
1988 - 1988 round robin programme on the interlaminar fracture toughness of advanced composites
ESIS TC 4
Researcher
Concluded
Outputs

Publications

Book
  1. Tavares, Sérgio M. O.; de Castro, Paulo. Damage tolerance of metallic aircraft structures. Springer. 2019.
  2. Tavares, S.M.O.; de Castro, P.M.S.T.. Preface. 2019.
  3. Arteiro, Albertino; de Castro, Paulo. Mecânica da Fratura e Fadiga: Exemplos de cálculo e aplicação. Porto, Portugal: Edições FEUP. 2014.
    Published
  4. Branco, Carlos Augusto Moura; Fernandes, Antonio Augusto; de Castro, Paulo. Fadiga de Estruturas Soldadas. Portugal: Fundação Calouste Gulbenkian. 1986.
    Published
Book chapter
  1. de Castro, P.M.S.T.; de Castro, Paulo M. S. T.. "No Risk No Progress—A Quick Tour Focusing on Materials and Structures". In Materials Design and Applications V, 187-208. Springer Nature Switzerland, 2024.
    10.1007/978-3-031-73906-4_13
  2. Tavares, S.M.O.; de Castro, P.M.S.T.. "Materials". 29-42. 2019.
    10.1007/978-3-319-70190-5_4
  3. Tavares, S.M.O.; de Castro, P.M.S.T.. "Introduction". 3-16. 2019.
    10.1007/978-3-319-70190-5_1
  4. Tavares, S.M.O.; de Castro, P.M.S.T.. "Fatigue crack growth". 23-27. 2019.
    10.1007/978-3-319-70190-5_3
  5. Tavares, S.M.O.; de Castro, P.M.S.T.. "Residual stress". 67-90. 2019.
    10.1007/978-3-319-70190-5_7
  6. Tavares, S.M.O.; de Castro, P.M.S.T.. "Fatigue crack propagation of a structural detail". 91-102. 2019.
    10.1007/978-3-319-70190-5_8
  7. Tavares, S.M.O.; de Castro, P.M.S.T.. "Maintenance". 17-22. 2019.
    10.1007/978-3-319-70190-5_2
  8. Marques, J.B.; Tavares, S.M.O.; de Castro, P.M.S.T.. "Analysis of mode II and mixed mode I-II in fracture and fatigue: A numerical and experimental study". 403-423. 2019.
    10.1007/978-3-030-02257-0_28
  9. Shahabi, E.; de Castro, P.M.S.T.. "Analysis of the semi-circular bend (SCB) specimen: Finite element method determination of t-stress, KI and KII". 387-402. 2019.
    10.1007/978-3-030-02257-0_27
  10. Tavares, S.M.O.; de Castro, P.M.S.T.. "Widespread fatigue damage and limit of validity". 43-55. 2019.
    10.1007/978-3-319-70190-5_5
  11. Tavares, S.M.O.; de Castro, P.M.S.T.. "Alloys and fatigue crack propagation". 59-66. 2019.
    10.1007/978-3-319-70190-5_6
  12. Moreira, P.M.G.P.; Da Silva, R.A.M.; De Figueiredo, M.A.V.; De Oliveira, F.M.F.; De Castro, P.M.S.T.. "A Comparison of the Fatigue Behaviour of FSW and MIG Weldments of two Aluminium Alloys". 613-622. Wiley, 2007.
    Published • 10.1002/9780470610794.ch63
Conference abstract
  1. de Castro, Paulo. "Engineering and society: prospective remarks". Paper presented in 5th Meeting of the Young Researchers of LAETA - EJIL5, Lisbon, May 5-6, 2022, Lisboa, 2022.
    Published
  2. Graça, Nuno Miguel (0000-0003-1736-2182); de Castro, Paulo. "Fatigue of mechanical components: a case study". Paper presented in Livro de resumos do 14º encontro de jovens investigadores da U.PORTO, Porto, 2021.
    Published
  3. Sousa, Paulo A. da C. ; de Castro, Paulo. "Remarks on specific sliding and Hertzian contact on spur gears". Paper presented in Livro de resumos do 13.º encontro de jovens investigadores da U.PORTO, Porto, 2020.
    Published
  4. Salgado, Rui Martim Lopes Busto (0000-0001-8619-5731); de Castro, Paulo. "Specified values of addendum thickness in spur gears' teeth: relationship with profile shift x". Paper presented in Livro de resumos do 13.º encontro de jovens investigadores da U.PORTO, Porto, 2020.
    Published
  5. Shahabi, Ehsan ; Paulo M. S. T. de Castro. "The semi-circular bend (SCB) specimen: FEM analysis". Paper presented in Proceedings PCF 2018. XVI Portuguese Conference on Fracture 2018, Covilhã, April 23- 24, 2018, Covilhã, 2018.
    Published
  6. J. Baganha Marques; Sérgio M.O. Tavares; Paulo M. S. T. de Castro. "Analysis of mode II and mixed mode I-II in fracture and fatigue: a numerical and experimental study". Paper presented in Proceedings PCF 2018. XVI Portuguese Conference on Fracture 2018, PCF 2018, Covilhã, April 23- 24, 2018, Covilhã, 2018.
    Published
  7. Moreira, S.J.; Tavares, Sérgio M. O. (0000-0003-0054-0771); Paulo M. S. T. de Castro. "Computational analysis of mode II and mode III specimens for fatigue crack growth". Paper presented in XV Portuguese Conference on Fracture, PCF 2016, February 10-12, 2016, Paço de Arcos, 2016.
Conference paper
  1. Duarte, Joaquim; Ribeiro, João; Castro, Paulo M.S.T. de; Tavares, Sérgio M.O.. "Structural Assessment Based on Computational Models and Digital Twin Technologies". Kaunas, 2024.
    Published • 10.5755/e01.2351-7034.2024.p258-263
  2. Tavares, S.M.O.; Ribeiro, J.A.; Belinha, J.; P.M.S.T. de Castro. "Aircraft Structures Life-cycle Simulation through Digital Twins and Model Updating Techniques". Porto, 2023.
    Published
  3. Graça, Nuno (0000-0003-1736-2182); de Castro, Paulo. "Fatigue behaviour of a spring: a case study". Paper presented in MATEC Web Conf. - 6th International Conference of Engineering Against Failure (ICEAF-VI 2021), 2021.
    Published • 10.1051/matecconf/202134904009
  4. Ramalho, Luís D.C.; de Castro, Paulo. "Parametric study of fatigue crack growth". Paper presented in 1st Virtual Iberian Conference on Structural Integrity. 25, 26 y 27 de marzo de 2020. Anales de Mecánica de la Fractura, Nº 37. https://gef.es/wp-content/uploads/2024/03/Anales-de-Mecanica-de-la-Fractura-37-2020_compressed.pdf, Coimbra, 2020.
    Published
  5. da Silva, Lucas F. R. C; de Castro, Paulo. "Neuber's rule: a numerical analysis". Paper presented in 1st Virtual Iberian Conference on Structural Integrity. 25, 26 y 27 de marzo de 2020. Anales de Mecánica de la Fractura, Nº 37. https://gef.es/wp-content/uploads/2024/03/Anales-de-Mecanica-de-la-Fractura-37-2020_compressed.pdf, Coimbra, 2020.
    Published
  6. de Mendonça, Bernardo F. ; de Castro, Paulo. "Rupture of the girth gear / kiln shell connection at an expanded clay factory". Paper presented in 1st Virtual Iberian Conference on Structural Integrity. 25, 26 y 27 de marzo de 2020. Anales de Mecánica de la Fractura, Nº 37. https://gef.es/wp-content/uploads/2024/03/Anales-de-Mecanica-de-la-Fractura-37-2020_compressed.pdf, Coimbra, 2020.
    Published
  7. Seixas, L. M. C.; Tavares, Sérgio M. O. (0000-0003-0054-0771); de Castro, Paulo. "Finite element models for structural design of power transformers". Paper presented in 1st Virtual Iberian Conference on Structural Integrity. 25, 26 y 27 de marzo de 2020. Anales de Mecánica de la Fractura, Nº 37. https://gef.es/wp-content/uploads/2024/03/Anales-de-Mecanica-de-la-Fractura-37-2020_compressed.pdf, Coimbra, 2020.
    Published
  8. C. Castro; P. Bastardo; S. Tavares; Paulo M. S. T. de Castro. "Printed circuit boards experimental and numerical characterization". Paper presented in EUROMECH Colloquium 603, Dynamics of micro and nano electromechanical systems: multi-field modelling and analysis, Porto, 2018.
    Published
  9. Tavares, S. M. O.; Moreira, S. J.; de Castro, P. M. S. T.; Gamboa, P. V.. "Morphing Aeronautical Structures: Morphing Aeronautical Structures: A review focused on UAVs and durability assessment". 2017.
  10. Tavares, S.M.O.; Moreira, S.J.; De Castro, P.M.S.T.; Gamboa, P.V.. "Morphing aeronautical structures: A review focused on UAVs and durability assessment". 2017.
    10.1109/APUAVD.2017.8308774
  11. Peixoto, D.F.C.; Paulo M. S. T. de Castro; Peixoto, Daniel F. C.; de Castro, Paulo M. S. T.. "Mixed mode fatigue crack propagation in a railway wheel steel". Paper presented in XV Portuguese Conference on Fracture, PCF 2016, February 10-12, 2016, Paço de Arcos, 2016.
    Published • 10.1016/J.PROSTR.2016.02.021
  12. Tavares, Sérgio M. O. (0000-0003-0054-0771); Viriato, N.; Vaz, M.; Paulo M. S. T. de Castro; Tavares, S. M. O.; de Castro, P. M. S. T.. "Failure analysis of the rod of a hydraulic cylinder". Paper presented in XV Portuguese Conference on Fracture, PCF 2016, February 10-12, 2016, Paço de Arcos, 2016.
    Published • 10.1016/J.PROSTR.2016.02.024
  13. Pastrama, S.D.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Practical Applications of Numerical Procedures for Structural Integrity Assessment". Paper presented in 1st International Conference on Structural Integrity, Funchal, 2015.
    Published • 10.1016/j.proeng.2015.08.052
  14. Tavares, S.M.O.; De Castro, P.M.S.T.. "Calculation of load capacity of cylindrical gears: Review of different approaches and calculation tools". 2015.
    10.1007/978-3-319-09411-3_82
  15. Reis, L.; Infante, V.; De Freitas, M.; Duarte, F.F.; Moreira, P.M.G.; De Castro, P.M.S.T.. "Fatigue behaviour of aluminium lap joints produced by laser beam and friction stir welding". 2014.
    10.1016/j.proeng.2014.06.265
  16. Batista, A.C.; Nobre, J.P.; Peixoto, D.F.C.; Ferreira, L.A.A.; de Castro, P.M.S.T.; Coelho, L.. "X-ray diffraction residual stress measurements for assessment of rolling contact fatigue behaviour of railway steels". 2014.
    10.4028/www.scientific.net/AMR.996.782
  17. Peixoto, D.F.C.; Ramos, D.M.; De Castro, P.M.S.T.; Ferreira, L.A.A.. "Rolling contact fatigue tests on wheel and rail steels". 2013.
  18. Peixoto, Daniel; Ferreira, Lus; de Castro, Paulo M. S. T.. "FATIGUE CRACK GROWTH TESTS IN RAILWAY WHEEL AND RAIL STEELS". 2012.
  19. Castro, Paulo. "DESIGN OF COURSES AND ACTIVITIES TO EDUCATE EDUCATORS IN THE USE OF TECHNOLOGY". 2012.
  20. Pastrama, S.D.; Moreira, P.; Richter-Trummer, V.; Tavares De Castro, P.; Vaz, M.. "A digital image correlation methodology for obtaining fracture mechanics parameters". 2010.
  21. Moreira, P.M.G.P.; De Matos, P.F.P.; De Castro, P.M.S.T.. "Fatigue striation spacing and equivalent initial flaw size in Al 2024-T3 riveted specimens". Paper presented in Sixth International Conference for Mesomechanics, Patras, 2004.
    Published • 10.1016/j.tafmec.2004.12.005
  22. Gongalves, J.P.M.; Oliveira, F.M.F.; De Castro, P.M.S.T.; Fernandes, A.A.. "Application of the thermoelastic effect to the stress analysis of structural adhesive connections". 1995.
    10.1115/DETC1995-0162
Conference poster
  1. A. A. Fernandes; P. Gomes; N. Couto; A. Pinto; Paulo M. S. T. de Castro. "Early phases of a novel cross car beam development". Paper presented in 6th European Transport Research Conference - TRA, April 18-21, 2016, Warsaw, Poland, 2016.
Edited book
  1. --. Fatigue and Fracture Behaviour of Additively Manufactured Mechanical Components. Switzerland: MDPI. 2021.
    Published • 10.3390/books978-3-03943-666-8 • Editor
  2. --. Structural connections for lightweight metallic structures. Berlin / Heidelberg, Germany: Springer. 2012.
    Published • Editor
  3. --. Multiscale Behavior of Materials and Structures: Analytical, Numerical and Experimental Simulation. Publindústria. 2006.
    Editor
  4. --. Elementos para a Gestão da Ciência e Tecnologia. Lisboa, Portugal: JNICT. 1996.
Journal article
  1. de Castro, Paulo. "Engenharia e sociedade - uma visão baseada na prevenção de falhas". Memórias da Academia das Ciências de Lisboa. Classe de Ciências (2025): http://hdl.handle.net/10400.26/54246.
    Published
  2. Felipe Klein Fiorentin; Rita Dantas; Roya Darabi; Grzegorz Lesiuk; Miguel Figueiredo; Paulo Tavares de Castro; Abílio de Jesus. "Relation Between Striations Spacing and Fatigue Crack Growth Rates for Additive Manufactured Inconel 625". Fatigue & Fracture of Engineering Materials & Structures (2025): https://doi.org/10.1111/ffe.14493.
    10.1111/ffe.14493
  3. Paulo M. S. T. de Castro. "Image Transmission and Selenium: Adriano de Paiva and Initial Steps in the XIX Century". Encyclopedia (2024): https://doi.org/10.3390/encyclopedia4040128.
    10.3390/encyclopedia4040128
  4. Paulo Tavares De Castro. "Engineering and society – prospective remarks, with a focus on Portugal". U.Porto Journal of Engineering (2024): https://doi.org/10.24840/2183-6493_0010-003_002862.
    10.24840/2183-6493_0010-003_002862
  5. Paulo M. S. T. de Castro. "Clarification on Classical Fatigue Design for Biaxial Stress Fields". Designs (2024): https://doi.org/10.3390/designs8060125.
    10.3390/designs8060125
  6. Tavares, S.M.O.; Ribeiro, J.A.; Ribeiro, B.A.; de Castro, P.M.S.T.. "Aircraft Structural Design and Life-Cycle Assessment through Digital Twins". Designs 8 2 (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85191747339&partnerID=MN8TOARS.
    10.3390/designs8020029
  7. Sérgio M. O. Tavares; Paulo M. S. T. de Castro. "Equivalent Stress Intensity Factor: The Consequences of the Lack of a Unique Definition". Applied Sciences (2023): https://doi.org/10.3390/app13084820.
    10.3390/app13084820
  8. da Silva, F.A.C.; de Castro, P.M.S.T.. "Redesign of a Failed Hoisting Shaft of a Vertical Transfer Device". Eng 4 3 (2023): 1981-2002. http://www.scopus.com/inward/record.url?eid=2-s2.0-85166547886&partnerID=MN8TOARS.
    10.3390/eng4030112
  9. Tomás Carneiro; João Oliveira; António J. Baptista; Paulo M. S. T. de Castro. "Enhancement of the LeanDfX Product Development Framework and Application to the Design of an AGV Structure". Designs (2022): https://doi.org/10.3390/designs6060114.
    10.3390/designs6060114
  10. Paulo De Castro. "Bi-material Flywheels and Castigliano’s Theorems: a Case Study". Journal on Mechanics of Solids (2022): https://doi.org/10.24840/2975-8262_001-001_001818.
    10.24840/2975-8262_001-001_001818
  11. de Castro, Paulo. "Remarks on 40+ Years of Mechanical Engineering Teaching". Journal on Teaching Engineering 1 1 (2021): 2-39. https://doi.org/10.24840/2795-4005_001.001_0002.
    Open access • Published • 10.24840/2795-4005_001.001_0002
  12. Luís Ramalho; Raul D. S. G. Campilho; Jorge Belinha; Paulo M. S. T. De Castro. "Parametric Study of Fatigue Crack Growth in a Finite Plate". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.002_0004.
    10.24840/2183-6493_007.002_0004
  13. Beatriz Henriques; Mariana Carvalho; Sérgio Tavares; Paulo De Castro. "Comparison of Safety Factor Values for Soderberg and DIN 743 Fatigue Analyses". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.002_0003.
    10.24840/2183-6493_007.002_0003
  14. Paulo T. de Castro; Tavares, Sérgio M. O. (0000-0003-0054-0771). "Fadiga de materiais e de estruturas - com enfoque na aeronáutica". Memórias da Academia de Ciências de Lisboa TOMO XLVII volume 2 (2020): 313-324.
    Published
  15. roberto citarella; Paulo de Castro; Angelo Maligno. "Editorial on Special Issue - Fatigue and Fracture Behaviour of Additive Manufacturing Mechanical Components". Applied Sciences (2020): https://www.mdpi.com/2076-3417/10/5/1652.
    10.3390/app10051652
  16. Sérgio M.O. Tavares; Luis Reis; Manuel Freitas; Paulo M.S.T. Castro. "Mixed mode fatigue and fracture in planar geometries: Observations on K eq and crack path modelling". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2441-2456. https://doi.org/10.1111/ffe.13093.
    10.1111/ffe.13093
  17. Luís Reis; Manuel Freitas; Paulo M.S.T. Castro. "Guest editorial: Special issue - New trends in fatigue and fracture (NT2F18)". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2413-2413. https://doi.org/10.1111/ffe.13114.
    10.1111/ffe.13114
  18. Pereira, Sergio A. G.; Tavares, Sergio M. O.; de Castro, Paulo M. S. T.. "Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens". Frattura Ed Integrità Strutturale (2019): https://publons.com/wos-op/publon/18293312/.
    10.3221/IGF-ESIS.49.40
  19. Roberto G. Citarella; Filippo Berto; Paulo M. S. T. de Castro. "Modelling and Optimizing Structural Behavior of Advanced Materials for Aerospace". International Journal of Aerospace Engineering (2018): https://doi.org/10.1155/2018/6296145.
    10.1155/2018/6296145
  20. Pedro Freitas; António Francisco Tenreiro; Paulo M. S. T. De Castro. "Comparison between the AFNOR Method and the Imposition of Balanced Maximum Specific Sliding in the Imposed Centre Distance Problem". U.Porto Journal of Engineering (2018): https://doi.org/10.24840/2183-6493_003.003_0002.
    10.24840/2183-6493_003.003_0002
  21. Ramos, H.M.E.; Tavares, S.M.O.; de Castro, P.M.S.T.. "Numerical modelling of welded T-joint configurations using SYSWELD". Science and Technology of Materials 30 (2018): 6-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071929637&partnerID=MN8TOARS.
    10.1016/j.stmat.2018.08.002
  22. Daniel F.C. Peixoto; Paulo M.S.T. de Castro. "Fatigue crack growth of a railway wheel". Engineering Failure Analysis 82 (2017): 420-434. https://doi.org/10.1016/j.engfailanal.2017.07.036.
    10.1016/j.engfailanal.2017.07.036
  23. S. M. O. Tavares; P. M. S. T. de Castro. "An overview of fatigue in aircraft structures". Fatigue & Fracture of Engineering Materials & Structures (2017): https://doi.org/10.1111%2Fffe.12631.
    10.1111/ffe.12631
  24. Ferreira, M. A. C.; Tavares, S. M. O.; Belinha, J.; de Castro, P. M. S. T.. "MIXED MODE CRACK PROPAGATION: NUMERICAL AND EXPERIMENTAL STUDY". PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017) (2017): https://publons.com/wos-op/publon/33865851/.
  25. Silva, M. Tiago von H. P. F.; Camanho, Pedro P.; Marques, Antonio T.; Castro, Paulo M. S. T.. "3D-reinforcement techniques for co-bonded CFRP/CFRP and CFRP/metal joints: a brief review". Ciência & Tecnologia dos Materiais (2017): https://publons.com/wos-op/publon/42896108/.
    10.1016/J.CTMAT.2016.07.011
  26. Tavares, S. M. O.; de Castro, P. M. S. T.. "A comparison of methodologies for fatigue analysis of shafts: DIN 743 vs. approaches based on Soderberg criterion". Ciência & Tecnologia dos Materiais (2017): https://publons.com/wos-op/publon/33865850/.
    10.1016/J.CTMAT.2016.06.014
  27. Caputo, Francesco; Navarro, Carlos; de Castro, Paulo M. S. T.. "Failure Mechanisms and Damage Modelling for Advanced Materials". Advances in Materials Science and Engineering (2017): https://publons.com/wos-op/publon/44253966/.
    10.1155/2017/6910685
  28. Lima, Tiago R.; Tavares, Sergio M. O.; de Castro, Paulo M. S. T.. "Residual stress field and distortions resulting from welding processes: numerical modelling using Sysweld". Ciência & Tecnologia dos Materiais (2017): https://publons.com/wos-op/publon/33865849/.
    10.1016/J.CTMAT.2016.07.015
  29. Moreira, S. J.; Tavares, S. M. O.; de Castro, P. M. S. T.. "Morphing structures and fatigue: The case of an unmanned aerial vehicle wing leading edge". Fatigue & Fracture of Engineering Materials & Structures (2017): https://publons.com/wos-op/publon/33865848/.
    10.1111/FFE.12664
  30. Pantelakis, S.; de Castro, P.; Guagliano, M.; Berto, F.. "Special issue: Fatigue of aeronautical materials and structures". Fatigue and Fracture of Engineering Materials and Structures 40 10 (2017): 1509-1509. http://www.scopus.com/inward/record.url?eid=2-s2.0-85028678374&partnerID=MN8TOARS.
    10.1111/ffe.12691
  31. Infante, V.; Braga, D.F.O.; Duarte, F.; Moreira, P.M.G.; De Freitas, M.; De Castro, P.M.S.T.. "Study of the fatigue behaviour of dissimilar aluminium joints produced by friction stir welding". International Journal of Fatigue 82 (2016): 310-316. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959344964&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2015.06.020
  32. Braga, D.F.O.; Ramos, T.; Eslami, S.; Tavares, P.J.; Infante, V.; de Castro, P.M.S.T.; Moreira, P.M.G.P.. "Train passenger car floor panel testing using digital image correlation and strain gauges and comparison with finite element modelling". Engineering Failure Analysis 69 (2016): 108-121. http://www.scopus.com/inward/record.url?eid=2-s2.0-84961842069&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2016.03.015
  33. Peixoto, Daniel F. C.; de Castro, Paulo M. S. T.. "Modelling of the fracture of a railway wheel". Igf Workshop Fracture and Structural Integrity (2016): https://publons.com/wos-op/publon/44253978/.
    10.1016/J.PROSTR.2016.06.239
  34. Pinto, A.F.B.P.; Tavares, S.M.O.; De Sá, J.M.A.C.; De Castro, P.M.S.T.. "Structural analysis of a cross car beam using finite element models". International Journal of Structural Integrity 6 6 (2015): 759-774. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948431847&partnerID=MN8TOARS.
    10.1108/IJSI-01-2015-0004
  35. De Figueiredo, M.A.V.; De Castro, P.M.S.T.. "J resistance curve behaviour of S355NL structural steel using the unloading compliance technique". Ciencia e Tecnologia dos Materiais 27 1 (2015): 1-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947763616&partnerID=MN8TOARS.
    10.1016/j.ctmat.2015.04.002
  36. Peixoto, D.F.C.; de Castro, P.M.S.T.. "Near threshold fatigue crack propagation in railways' steels: Comparison of two testing techniques". Theoretical and Applied Fracture Mechanics 80 (2015): 73-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946492635&partnerID=MN8TOARS.
    10.1016/j.tafmec.2015.06.008
  37. Duarte, F.F.; Infante, V.I.V.; Moreira, P.M.G.; Freitas, M.D.; De Castro, P.M.S.T.. "The effect of welding direction in the fatigue life of aluminium FS welded lap joints". International Journal of Structural Integrity 6 6 (2015): 775-786. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948427220&partnerID=MN8TOARS.
    10.1108/IJSI-02-2015-0006
  38. Braga, D.F.O.; Tavares, S.M.O.; Da Silva, L.F.M.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Advanced design for lightweight structures: Review and prospects". Progress in Aerospace Sciences 69 (2014): 29-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903374272&partnerID=MN8TOARS.
    10.1016/j.paerosci.2014.03.003
  39. Batista, A.C.; Peixoto, D.F.C.; Nobre, J.P.; Coelho, L.; Ramos, D.M.; Ferreira, L.A.A.; de Castro, P.M.S.T.. "Wear and surface residual stress evolution on twin-disc tests of rail/wheel steels". Materials Science Forum 768-769 (2014): 707-713. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886071315&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.768-769.707
  40. Braga, D.F.O.; Coules, H.E.; Pirling, T.; Richter-Trummer, V.; Colegrove, P.; De Castro, P.M.S.T.. "Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction". Journal of Materials Processing Technology 213 12 (2013): 2323-2328. http://www.scopus.com/inward/record.url?eid=2-s2.0-84881180034&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2013.07.004
  41. Richter-Trummer, V.; Miranda, R.M.C.; Albuquerque, C.; De Castro, P.M.S.T.. "Fatigue crack striation spacing for welded and base material CT steel specimens". Materials Science Forum 730-732 (2013): 793-798. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870737774&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.793
  42. Moreira, P.M.G.P.; de Figueiredo, M.A.V.; de Castro, P.M.S.T.. "A contribution to the mechanical characterization of cu ETP used in the electric motors industry". Materials Science Forum 730-732 (2013): 679-684. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870759968&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.679
  43. Tavares, S.M.O.; Camanho, P.; De Castro, P.M.S.T.. "Assessment of materials for fuselage panels considering fatigue behavior". Materials Science Forum 730-732 (2013): 265-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870739196&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.265
  44. Peixoto, D.F.C.; Ferreira, L.A.A.; de Castro, P.M.S.T.. "The dang van criterion for fatigue design". Materials Science Forum 730-732 (2013): 555-560. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870735958&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.555
  45. Miranda, R.M.C.; Albuquerque, C.; Richter-Trummer, V.; De Figueiredo, M.A.V.; Calçada, R.; De Castro, P.M.S.T.. "Fatigue crack propagation behavior of the welded steel of a railway bridge". Materials Science Forum 730-732 (2013): 787-792. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870789798&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.787
  46. Richter-Trummer, V.; Koch, D.; Witte, A.; Dos Santos, J.F.; De Castro, P.M.S.T.. "Methodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determination". International Journal of Advanced Manufacturing Technology 68 9-12 (2013): 2271-2281. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887620040&partnerID=MN8TOARS.
    10.1007/s00170-013-4828-x
  47. Tavares, S.M.O.; dos Santos, J.F.; de Castro, P.M.S.T.. "Friction stir welded joints of Al-Li Alloys for aeronautical applications: Butt-joints and tailor welded blanks". Theoretical and Applied Fracture Mechanics 65 (2013): 8-13. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879783486&partnerID=MN8TOARS.
    10.1016/j.tafmec.2013.05.002
  48. Castro, P. M. S. T. de; Sergio, Tavares M. O.. "Special issue: 1st International Conference of the IJSI, Porto, Portugal, June 25-28, 2012". International Journal of Structural Integrity (2013): https://publons.com/wos-op/publon/44254081/.
    10.1108/IJSI-06-2013-0010
  49. Albuquerque, C.M.C.; Miranda, R.M.C.; Richter-Trummer, V.; Figueiredo, M.A.V.D.; Calçada, R.; Castro, P.M.S.T.D.. "Fatigue crack propagation behaviour in thick steel weldments". International Journal of Structural Integrity 3 2 (2012): 184-203. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861644171&partnerID=MN8TOARS.
    10.1108/17579861211235192
  50. Albuquerque, C.; Calçada, R.; De Castro, P.M.S.T.. "Fatigue assessment of a bowstring railway bridge". Civil-Comp Proceedings 99 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893968078&partnerID=MN8TOARS.
  51. Peixoto, D.F.C.; Ferreira, L.A.A.; De Castro, P.M.S.T.. "Fatigue crack propagation behavior in railway steels". Transport Means - Proceedings of the International Conference (2012): 21-24. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875667666&partnerID=MN8TOARS.
  52. Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Fatigue crack growth on FSW AA2024-T3 aluminum joints". Key Engineering Materials 498 (2012): 126-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856082859&partnerID=MN8TOARS.
    10.4028/www.scientific.net/KEM.498.126
  53. Richter-Trummer, V.; Suzano, E.; Beltrão, M.; Roos, A.; dos Santos, J.F.; de Castro, P.M.S.T.. "Influence of the FSW clamping force on the final distortion and residual stress field". Materials Science and Engineering A 538 (2012): 81-88. http://www.scopus.com/inward/record.url?eid=2-s2.0-84857115352&partnerID=MN8TOARS.
    10.1016/j.msea.2012.01.016
  54. Moreira, P.M.G.P.; de Jesus, A.M.P.; de Figueiredo, M.A.V.; Windisch, M.; Sinnema, G.; de Castro, P.M.S.T.. "Fatigue and fracture behaviour of friction stir welded aluminium-lithium 2195". Theoretical and Applied Fracture Mechanics 60 1 (2012): 1-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866501661&partnerID=MN8TOARS.
    10.1016/j.tafmec.2012.06.001
  55. Albuquerque, C.; de Castro, P.M.S.T.; Calçada, R.. "Efficient crack analysis of dynamically loaded structures using a modal superposition of stress intensity factors". Engineering Fracture Mechanics 93 (2012): 75-91. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865441654&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2012.06.009
  56. Moreira, P.M.G.P.; Richter-Trummer, V.; De Castro, P.M.S.T.. "Damage tolerance of stiffened aeronautical panels and residual stress effects". Transport Means - Proceedings of the International Conference (2012): 162-165. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875661771&partnerID=MN8TOARS.
  57. Peixoto, D. F. C.; Ferreira, L. A. A.; de Castro, P. M. S. T.. "Fatigue Crack Propagation Behavior in Railway Steels". PROCEEDINGS OF THE 20TH INTERNATIONAL SCIENTIFIC CONFERENCE TRANSPORT MEANS (2012): https://publons.com/wos-op/publon/44253987/.
  58. de Castro, Paulo M. S. T.; Moreira, Pedro M. G. P.; Ochsner, Andreas. "Fracture, fatigue and damage". International Journal of Structural Integrity (2012): https://publons.com/wos-op/publon/32611176/.
    10.1108/IJSI.2012.43603BAA.001
  59. Braga, Daniel F. O.; Richter-Trummer, Valentin; de Castro, Paulo M. S. T.. "RESIDUAL STRESS MEASUREMENT USING THE CONTOUR METHOD: PROCEDURE OPTIMIZATION". ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS (2012): https://publons.com/wos-op/publon/31162069/.
  60. Peixoto, D.F.C.; De Castro, P.M.S.T.; Ferreira, L.A.A.. "Fatigue crack growth in railway steel". Civil-Comp Proceedings 98 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84875643063&partnerID=MN8TOARS.
    10.4203/ccp.98.87
  61. Tavares, S.M.O.; De Castro, P.M.S.T.. "Stress intensity factor calibration for a longitudinal crack in a fuselage barrel and the bulging effect influence". Engineering Fracture Mechanics 78 17 (2011): 2907-2918. http://www.scopus.com/inward/record.url?eid=2-s2.0-80054851526&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2011.08.007
  62. Tavares, S.M.O.; Häusler, S.M.; Baiz, P.M.; De Castro, P.M.S.T.; Horst, P.; Aliabadi, M.H.. "Crack growth simulation in integrally stiffened structures including residual stress effects from manufacturing. Part II: Modelling and experiments comparison". SDHM Structural Durability and Health Monitoring 7 3 (2011): 191-209. http://www.scopus.com/inward/record.url?eid=2-s2.0-84555205738&partnerID=MN8TOARS.
  63. Häusler, S.M.; Baiz, P.M.; Tavares, S.M.O.; Brot, A.; Horst, P.; Aliabadi, M.H.; De Castro, P.M.S.T.; Peleg-Wolfin, Y.. "Crack growth simulation in integrally stiffened structures including residual stress effects from manufacturing. Part I: Model overview". SDHM Structural Durability and Health Monitoring 7 3 (2011): 163-190. http://www.scopus.com/inward/record.url?eid=2-s2.0-84555203845&partnerID=MN8TOARS.
  64. Tavares, S.M.O.; De Castro, P.M.S.T.. "Impact of integral structures in the design for manufacture and assembly of airframes". Key Engineering Materials 450 (2011): 279-282. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650747557&partnerID=MN8TOARS.
    10.4028/www.scientific.net/KEM.450.279
  65. Richter-Trummer, V.; De Castro, P.M.S.T.. "The through-the-thickness measurement of residual stress in a thick welded steel compact tension specimen by the contour method". Journal of Strain Analysis for Engineering Design 46 4 (2011): 315-322. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051945147&partnerID=MN8TOARS.
    10.1177/0309324711401780
  66. Richter-Trummer, V.; Marques, E.A.; Chaves, F.J.P.; Tavares, J.M.R.S.; Da Silva, L.F.M.; De Castro, P.M.S.T.. "Analysis of crack growth behavior in a double cantilever beam adhesive fracture test by different digital image processing techniques". Materialwissenschaft und Werkstofftechnik 42 5 (2011): 452-459. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955618435&partnerID=MN8TOARS.
    10.1002/mawe.201100807
  67. Richter-Trummer, V.; Moreira, P.M.G.P.; Ribeiro, J.; De Castro, P.M.S.T.. "The contour method for residual stress determination applied to an AA6082-T6 friction stir butt weld". Materials Science Forum 681 (2011): 177-181. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955531635&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.681.177
  68. De Jesus, A.M.P.; Figueiredo, M.A.V.; Ribeiro, A.S.; De Castro, P.M.S.T.; Fernandes, A.A.. "Residual lifetime assessment of an ancient riveted steel road bridge". Strain 47 SUPPL. 1 (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-79958846233&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2008.00596.x
  69. Moreira, P.M.G.P.; Richter-Trummer, V.; Tavares, S.M.O.; De Castro, P.M.S.T.. "Characterization of fatigue crack growth rate of AA6056 T651 and T6: Application to predict fatigue behaviour of stiffened panels". Materials Science Forum 636-637 (2010): 1511-1517. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649120046&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.1511
  70. Peixoto, D.F.C.; Ferreira, L.A.A.; De Castro, P.M.S.T.. "Application of the dang van fatigue criterion to the rail/wheel contact problem". Materials Science Forum 636-637 (2010): 1178-1185. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649115725&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.1178
  71. Tavares, S.M.O.; Richter-Trummer, V.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Fatigue crack growth modeling in stiffened panels considering residual stress effects". Materials Science Forum 636-637 (2010): 1172-1177. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649100865&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.1172
  72. Tavares, S.M.O.; Castro, R.A.S.; Richter-Trummer, V.; Vilaça, P.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Friction stir welding of T-joints with dissimilar aluminium alloys: Mechanical joint characterisation". Science and Technology of Welding and Joining 15 4 (2010): 312-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953851779&partnerID=MN8TOARS.
    10.1179/136217109X12562846839114
  73. Richter-Trummer, V.; Silva, S.O.; Peixoto, D.F.C.; Frazao, O.; Moreira, P.M.G.P.; Santos, J.L.; De Castro, P.M.S.T.. "Fibre Bragg grating sensors for monitoring the metal inert gas and friction stir welding processes". Measurement Science and Technology 21 8 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77957589675&partnerID=MN8TOARS.
    10.1088/0957-0233/21/8/085105
  74. De Castro, P.M.S.T.; Camanho, P.P.; Da Silva, L.F.M.; Moreira, P.M.G.P.. "IDMEC - Faculdade de Engenharia da Universidade do Porto Concise presentation with focus on aeronautics R&D". International Journal of Structural Integrity 1 2 (2010): 161-172. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955036402&partnerID=MN8TOARS.
    10.1108/17579861011053899
  75. Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Fractographic analysis of fatigue crack growth in lightweight integral stiffened panels". International Journal of Structural Integrity 1 3 (2010): 233-258. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955001741&partnerID=MN8TOARS.
    10.1108/17579861011092373
  76. Richter-Trummer, V.; Moreira, P.M.G.P.; Pastrama, S.D.; Vaz, M.A.P.; De Castro, P.M.S.T.. "Methodology for in situ stress intensity factor determination on cracked structures by digital image correlation". International Journal of Structural Integrity 1 4 (2010): 344-357. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955005748&partnerID=MN8TOARS.
    10.1108/17579861011099178
  77. de Castro, Paulo M. S. T.; Guinea, Gustavo V.. "Iberian Conference on Fracture and Structural Integrity - CIFIE'2010". International Journal of Structural Integrity (2010): https://publons.com/wos-op/publon/9365512/.
    10.1108/IJSI.2010.43601DAA.001
  78. Moreira, P.M.G.P.; De Matos, P.F.P.; Pastrama, S.D.; Camanho, P.P.; De Castro, P.M.S.T.. "Fatigue life prediction of a cracked lap splice specimen using fracture mechanics parameters". UPB Scientific Bulletin, Series D: Mechanical Engineering 71 3 (2009): 51-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887631140&partnerID=MN8TOARS.
  79. Tavares, S.M.O.; Richter-Trummer, V.; Azevedo, P.C.M.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Integral lightweight structures: Fatigue and damage tolerance". AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications (2009): 65-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856619499&partnerID=MN8TOARS.
  80. Richter-Trummer, V.; Tavares, S.M.O.; Peixoto, D.F.C.; Silva, S.F.; Frazão, O.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Welding monitoring using FBG sensors". AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications (2009): 73-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856614982&partnerID=MN8TOARS.
  81. Moreira, P.M.G.P.; Santos, T.; Tavares, S.M.O.; Richter-Trummer, V.; Vilaça, P.; de Castro, P.M.S.T.. "Mechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6". Materials and Design 30 1 (2009): 180-187. http://www.scopus.com/inward/record.url?eid=2-s2.0-48549103306&partnerID=MN8TOARS.
    10.1016/j.matdes.2008.04.042
  82. Moreira, P.M.G.P.; Pastrama, S.D.; de Castro, P.M.S.T.. "Three-dimensional stress intensity factor calibration for a stiffened cracked plate". Engineering Fracture Mechanics 76 14 (2009): 2298-2308. http://www.scopus.com/inward/record.url?eid=2-s2.0-69249212195&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.07.003
  83. Tavares, S.M.O.; Richter-Trummer, V.; Azevedo, P.C.M.; Figueiredo, M.A.V.; De Castro, P.M.S.T.; Emílio, B.; Vilaça, P.. "Friction stir welding of T-joints in dissimilar aluminium alloys". ASME International Mechanical Engineering Congress and Exposition, Proceedings 4 (2009): 265-273. http://www.scopus.com/inward/record.url?eid=2-s2.0-69949184510&partnerID=MN8TOARS.
    10.1115/IMECE2008-67522
  84. Moreira, P.M.G.P.; de Jesus, A.M.P.; Ribeiro, A.S.; de Castro, P.M.S.T.. "Fatigue crack growth in friction stir welds of 6082-T6 and 6061-T6 aluminium alloys: A comparison". Theoretical and Applied Fracture Mechanics 50 2 (2008): 81-91. http://www.scopus.com/inward/record.url?eid=2-s2.0-53349177468&partnerID=MN8TOARS.
    10.1016/j.tafmec.2008.07.007
  85. Moreira, P.M.G.P.; de Oliveira, F.M.F.; de Castro, P.M.S.T.. "Fatigue behaviour of notched specimens of friction stir welded aluminium alloy 6063-T6". Journal of Materials Processing Technology 207 1-3 (2008): 283-292. http://www.scopus.com/inward/record.url?eid=2-s2.0-50949108474&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2007.12.113
  86. Richter-Trummer, V.; Tavares, S.M.O.; Moreira, P.M.G.P.; de Castro, P.M.S.T.; Tavares, S. M. O.; Moreira, P. M. G. P.; de Castro, P. M. S. T.. "Friction stir welding of aluminium alloys and damage tolerance of integral monolithic structures". Mechanika 73 5 (2008): 18-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-57749204557&partnerID=MN8TOARS.
  87. Chaves, F.J.P.; Da Silva, L.F.M.; De Castro, P.M.S.T.. "Adhesively bonded T-joints in polyvinyl chloride windows". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 222 3 (2008): 159-174. http://www.scopus.com/inward/record.url?eid=2-s2.0-46349088201&partnerID=MN8TOARS.
    10.1243/14644207JMDA182
  88. Moreira, P. M. G. P.; Richter-Trummer, V.; de Castro, P. M. S. T.; Moreira, P.M.G.P.; De Castro, P.M.S.T.. "Fatigue Behaviour of FS, LB and MIG Welds of AA6061-T6 and AA6082-T6". Solid Mechanics and its Applications 152 (2008): 85-111. https://publons.com/wos-op/publon/10553854/.
    10.1007/978-1-4020-8520-8_5
  89. Moreira, P.M.G.P.; Santos, T.; Tavares, S.M.O.; Richter-Trummer, V.; Vilaça, P.; De Castro, P.M.S.T.. "Mechanical Characterization of Friction Stir Welds of Two Dissimilar Aluminium Alloys of the 6xxx Series". Materials Science Forum 587-588 (2008): 430-434. https://publons.com/wos-op/publon/4120721/.
    10.4028/WWW.SCIENTIFIC.NET/MSF.587-588.430
  90. Moreira, P.M.G.P.; de Matos, P.F.P.; Camanho, P.P.; Pastrama, S.D.; de Castro, P.M.S.T.. "Stress intensity factor and load transfer analysis of a cracked riveted lap joint". Materials and Design 28 4 (2007): 1263-1270. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751515704&partnerID=MN8TOARS.
    10.1016/j.matdes.2005.12.014
  91. de Matos, P.F.P.; McEvily, A.J.; Moreira, P.M.G.P.; de Castro, P.M.S.T.. "Analysis of the effect of cold-working of rivet holes on the fatigue life of an aluminum alloy". International Journal of Fatigue 29 3 (2007): 575-586. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845227844&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2006.04.004
  92. Moreira, P.M.G.P.; Frazão, O.; Tavares, S.M.O.; De Figueiredo, M.A.V.; Restivo, M.T.; Santos, J.L.; De Castro, P.M.S.T.. "Temperature field acquisition during gas metal arc welding using thermocouples, thermography and fibre Bragg grating sensors". Measurement Science and Technology 18 3 (2007): 877-883. http://www.scopus.com/inward/record.url?eid=2-s2.0-34247220964&partnerID=MN8TOARS.
    10.1088/0957-0233/18/3/041
  93. Moreira, P.M.G.P.; De Jesus, A.M.P.; Ribeiro, A.S.; De Castro, P.M.S.T.. "Assessment of the fatigue behaviour of friction stir welded joints: Aluminium alloy 6082-T6". Key Engineering Materials 348-349 (2007): 209-212. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547201996&partnerID=MN8TOARS.
    10.4028/WWW.SCIENTIFIC.NET/KEM.348-349.209
  94. Moreira, P.M.G.P.; de Figueiredo, M.A.V.; de Castro, P.M.S.T.. "Fatigue behaviour of FSW and MIG weldments for two aluminium alloys". Theoretical and Applied Fracture Mechanics 48 2 (2007): 169-177. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547578607&partnerID=MN8TOARS.
    10.1016/j.tafmec.2007.06.001
  95. de Castro, P.M.S.T.; de Matos, P.F.P.; Moreira, P.M.G.P.; da Silva, L.F.M.. "An overview on fatigue analysis of aeronautical structural details: Open hole, single rivet lap-joint, and lap-joint panel". Materials Science and Engineering A 468-470 SPEC. ISS. (2007): 144-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548124913&partnerID=MN8TOARS.
    10.1016/j.msea.2006.06.147
  96. Moreira, P.M.G.P.; Pastrama, S.D.; De Castro, P.M.S.T.. "Comparative three dimensional fracture analyses of cracked plates". UPB Scientific Bulletin, Series D: Mechanical Engineering 69 1 (2007): 43-58. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887250074&partnerID=MN8TOARS.
  97. Melo, F.J.Q.; Carneiro, J.A.O.; Tavares, C.L.; Camanho, P.P.; De Castro, P.T.. "A simplified method for the impact test of beams using a pseudo-dynamic (PSD) process". Mechanics Research Communications 33 2 (2006): 190-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-27744478091&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2005.05.003
  98. Monteiro, R.; De Castro, P.M.S.T.; Calhau, C.; Azevedo, I.. "Adipocyte size and liability to cell death". Obesity Surgery 16 6 (2006): 804-806. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745019170&partnerID=MN8TOARS.
    10.1381/096089206777346600
  99. Figueiredo, M.A.V.; Jesus, A.M.P.; Ribeiro, A.S.; De Castro, P.M.S.T.; Fernandes, A.A.. "Fatigue behaviour of riveted steel lap joints". Proceedings of the 3rd International Conference on Bridge Maintenance, Safety and Management - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost (2006): 479-481. http://www.scopus.com/inward/record.url?eid=2-s2.0-56749151325&partnerID=MN8TOARS.
  100. Jorge, R.M.N.; Fernandas, A.A.; De Castro, P.M.S.T.; Santos, N.E.; Fonseca, R.; Matos, A.C.O.. "Fatigue design of welded tubular steel bridge details". Proceedings of the 4th International Conference on Current and Future Trends in Bridge Design, Construction and Maintenance (2006): 139-148. http://www.scopus.com/inward/record.url?eid=2-s2.0-34249085376&partnerID=MN8TOARS.
  101. Valenca, Samuel Santos; Castro, Paulo; Pimenta, Wagner Alves; Lanzetti, Manuella; Silva, Simone Vargas; Barja-Fidalgo, Cristina; Goncalves Koatz, Vera Lucia; Porto, Luis Cristovao. "Light cigarette smoke-induced emphysema and NF kappa B activation in mouse lung". International Journal of Experimental Pathology (2006): https://publons.com/wos-op/publon/4931080/.
    10.1111/J.1365-2613.2006.00492.X
  102. De Matos, P.F.P.; Moreira, P.M.G.P.; Camanho, P.P.; De Castro, P.M.S.T.. "Numerical simulation of cold working of rivet holes". Finite Elements in Analysis and Design 41 9-10 (2005): 989-1007. http://www.scopus.com/inward/record.url?eid=2-s2.0-17644413570&partnerID=MN8TOARS.
    10.1016/j.finel.2005.01.001
  103. de Matos, P.F.P.; Moreira, P.M.G.P.; Nedbal, I.; de Castro, P.M.S.T.. "Reconstitution of fatigue crack growth in Al-alloy 2024-T3 open-hole specimens using microfractographic techniques". Engineering Fracture Mechanics 72 14 (2005): 2232-2246. http://www.scopus.com/inward/record.url?eid=2-s2.0-21844434929&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2005.02.005
  104. Pinho, S.T.; Martins, H.B.; Camanho, P.P.; Santare, M.H.; de Castro, P.M.S.T.. "Residual stress field and reduction of stress intensity factors in cold-worked holes". Theoretical and Applied Fracture Mechanics 44 2 (2005): 168-177. http://www.scopus.com/inward/record.url?eid=2-s2.0-26844539647&partnerID=MN8TOARS.
    10.1016/j.tafmec.2005.06.005
  105. Pina, J.C.P.; Dias, A.M.; de Matos, P.F.P.; Moreira, P.M.G.P.; de Castro, P.M.S.T.. "Residual stress analysis near a cold expanded hole in a textured Alclad sheet using X-ray diffraction". Experimental Mechanics 45 1 (2005): 83-88. http://www.scopus.com/inward/record.url?eid=2-s2.0-21844459881&partnerID=MN8TOARS.
    10.1177/0014485105051007
  106. Matos, P.; Moreira, P.; Pina, J.; Dias, A.M.; De Castro, P.M.S.T.. "Residual Stresses around an Expanded Hole in an Aluminum Clad Sheet". Materials Science Forum 490-491 (2005): 41-46. https://publons.com/wos-op/publon/10553868/.
    10.4028/WWW.SCIENTIFIC.NET/MSF.490-491.41
  107. Moreira, P.M.G.P.; De Matos, P.F.P.; Pinho, S.T.; Pastrama, S.D.; Camanho, P.P.; De Castro, P.M.S.T.. "The residual stress intensity factors for cold-worked cracked holes: A technical note". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 879-886. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143109045&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00768.x
  108. de Morais, A.B.; Rebelo, C.C.; de Castro, P.M.S.T.; Marques, A.T.; Davies, P.; de Morais, AB; Rebelo, CC; et al. "Interlaminar fracture studies in Portugal: Past, present and future". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 767-773. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143078054&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00744.x
  109. de Matos, P.F.P.; Moreira, P.M.G.P.; Pina, J.C.P.; Dias, A.M.; de Castro, P.M.S.T.. "Residual stress effect on fatigue striation spacing in a cold-worked rivet hole". Theoretical and Applied Fracture Mechanics 42 2 (2004): 139-148. http://www.scopus.com/inward/record.url?eid=2-s2.0-5144221406&partnerID=MN8TOARS.
    10.1016/j.tafmec.2004.08.003
  110. De Matos, P.F.P.; Moreira, P.M.G.P.; Pina, J.C.P.; Dias, A.A.M.; De Castro, P.M.S.T.. "Influence of residual stresses on fatigue striation spacing in cold-worked specimens". Multiscaling in Applied Science and Emerging Technology, Fundamentals and Applications in Mesomechanics: Proceedings of the Sixth International Conference for Mesomechanics (2004): 400-406. http://www.scopus.com/inward/record.url?eid=2-s2.0-6344280214&partnerID=MN8TOARS.
  111. Cojocaru, D.; Pastrama, S.D.; De Castro, P.M.S.T.. "Stress intensity factors for a radially cracked hollow disk subjected to different loadings". UPB Scientific Bulletin, Series D: Mechanical Engineering 66 2-4 (2004): 65-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-29244447169&partnerID=MN8TOARS.
  112. de Castro, P.M.S.T.; Fernandes, A.A.. "Methodologies for failure analysis: A critical survey". Materials and Design 25 2 (2004): 117-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-0345566293&partnerID=MN8TOARS.
    10.1016/j.matdes.2003.09.020
  113. De Matos, P.F.P.; Moreira, P.M.G.P.; Portela, A.; De Castro, P.M.S.T.. "Dual boundary element analysis of cracked plates: Post-processing implementation of the singularity subtraction technique". Computers and Structures 82 17-19 (2004): 1443-1449. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042737396&partnerID=MN8TOARS.
    10.1016/j.compstruc.2004.03.040
  114. Pereira, A.B.; de Morais, A.B.; Marques, A.T.; de Castro, P.T.. "Mode II interlaminar fracture of carbon/epoxy multidirectional laminates". Composites Science and Technology 64 10-11 (2004): 1653-1659. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442679503&partnerID=MN8TOARS.
    10.1016/j.compscitech.2003.12.001
  115. Tavares de Castro, P.M.S.. "Current fatigue and fracture research in Portugal". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): http://www.scopus.com/inward/record.url?eid=2-s2.0-4143122194&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00813.x
  116. De Jesus, A.M.P.; Ribeiro, A.S.; Portela, A.; de Castro, P.M.S.T.; Fernandas, A.A.. "Software development for the fatigue life prediction of structural components". Welding Research Abroad 49 1 (2003): 1-5. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037268861&partnerID=MN8TOARS.
  117. Gonçalves, J.P.M.; De Moura, M.F.S.F.; Magalhães, A.G.; De Castro, P.M.S.T.. "Application of interface finite elements to three-dimensional progressive failure analysis of adhesive joints". Fatigue and Fracture of Engineering Materials and Structures 26 5 (2003): 479-486. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038528578&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2003.00653.x
  118. Da Silva, L.F.M.; Stewardson, D.J.; De Oliveira, F.M.F.; De Castro, P.M.S.T.. "Fatigue crack growth of rails for railways". Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 217 2 (2003): 89-97. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038043546&partnerID=MN8TOARS.
    10.1243/095440903765762832
  119. DeCastro, P.M.S.T.; Pastrama, S.D.. "The compounding method for calculating stress intensity factors: Description and applications". UPB Scientific Bulletin, Series D: Mechanical Engineering 64 4 (2002): 35-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887500920&partnerID=MN8TOARS.
  120. Gonçalves, J.P.M.; De Moura, M.F.S.F.; De Castro, P.M.S.T.. "A three-dimensional finite element model for stress analysis of adhesive joints". International Journal of Adhesion and Adhesives 22 5 (2002): 357-365. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036036282&partnerID=MN8TOARS.
    10.1016/S0143-7496(02)00015-5
  121. De Morais, A.B.; Silva, J.F.; Marques, A.T.; De Castro, P.T.. "Mode II interlaminar fracture of filament wound angle-ply specimens". Applied Composite Materials 9 2 (2002): 117-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036498212&partnerID=MN8TOARS.
    10.1023/A:1013898312796
  122. De Morais, A.B.; De Moura, M.F.; Marques, A.T.; De Castro, P.T.. "Mode-I interlaminar fracture of carbon-epoxy cross-ply composites". Composites Science and Technology 62 5 (2002): 679-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036534675&partnerID=MN8TOARS.
    10.1016/S0266-3538(01)00223-8
  123. Cojocaru, D.; Pastram, S.D.; De Castro, P.M.S.T.. "Finite element weight function application for a cracked disk". International Journal of Fracture 116 1 (2002): http://www.scopus.com/inward/record.url?eid=2-s2.0-0036660398&partnerID=MN8TOARS.
  124. De Jesus, A.M.P.; Ribeiro, A.S.; Portela, A.; de Castro, P.M.S.T.; Fernandes, A.A.. "Software development for the fatigue life prediction of structural components". Welding in the World 45 11-12 (2001): 3-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950074695&partnerID=MN8TOARS.
  125. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Marques, A.T.; De Castro, P.M.S.T.. "Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model". Composite Structures 50 2 (2000): 151-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040952748&partnerID=MN8TOARS.
  126. Marques, A.T.; Balacó de Morais, A.; Francisco Silva, J.; Tavares de Castro, P.. "Fracture mechanics concepts and structural integrity of filament wound pipes". European Structural Integrity Society 26 C (2000): 253-261. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957082965&partnerID=MN8TOARS.
    10.1016/S1566-1369(00)80053-9
  127. Gonçalves, J.P.M.; De Moura, M.F.S.F.; De Castro, P.M.S.T.; Marques, A.T.. "Interface element including point-to-surface constraints for three-dimensional problems with damage propagation". Engineering Computations (Swansea, Wales) 17 1 (2000): 28-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342955781&partnerID=MN8TOARS.
  128. Silva, L.F.M.; Gonçalves, J.P.M.; Oliveira, F.M.F.; De Castro, P.M.S.T.. "Applicability of the SPATE technique to the detection of hidden cracks". NDT and E International 33 1 (2000): 7-13. http://www.scopus.com/inward/record.url?eid=2-s2.0-17144470672&partnerID=MN8TOARS.
    10.1016/S0963-8695(99)00012-2
  129. Silva, L.F.M.; Gonçalves, J.P.M.; Oliveira, F.M.F.; De Castro, P.M.S.T.. "Multiple-site damage in riveted lap-joints: experimental simulation and finite element prediction". International Journal of Fatigue 22 4 (2000): 319-338. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342626770&partnerID=MN8TOARS.
    10.1016/S0142-1123(99)00129-2
  130. Goncalves, J.P.M.; De Castro, P.M.S.T.. "Application of the line spring model to some complex geometries, and comparison with three-dimensional results". International Journal of Pressure Vessels and Piping 76 8 (1999): 551-560. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032856190&partnerID=MN8TOARS.
    10.1016/S0308-0161(99)00034-4
  131. Sabino Domingues, J.; Portela, A.; De Castro, P.M.S.T.. "Trefftz boundary element method applied to fracture mechanics". Engineering Fracture Mechanics 64 1 (1999): 67-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033184683&partnerID=MN8TOARS.
  132. Figueiredo, M.V.; Oliveira, F.M.; De Castro, P.T.; Fernandes, A.A.. "Failure analysis of a shaft belonging to a ship engine speed controller". American Society of Mechanical Engineers, Design Engineering Division (Publication) DE 102 (1999): 97-102. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033300320&partnerID=MN8TOARS.
    10.1115/imece1999-0648
  133. Figueiredo, MV; Oliveira, FMF; Goncalves, JPM; de Castro, PMST; Fernandes, AA; Figueiredo, M.V.; Oliveira, F.M.F.; et al. "Fracture analysis of forks of an heavy duty lift truck". Case Histories on Integrity and Failures in Industry 8 5 (1999): 411-421. https://publons.com/wos-op/publon/19359198/.
    10.1016/S1350-6307(00)00040-6
  134. Pastrama, S.-D.; De Castro, P.M.S.T.. "Weight functions from finite element displacements". International Journal of Pressure Vessels and Piping 75 3 (1998): 229-236. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032017301&partnerID=MN8TOARS.
  135. Melo, F.J.M.Q.; De Castro, P.M.S.T.. "The linear elastic stress analysis of curved pipes under generalized loads using a reduced integration finite ring element". Journal of Strain Analysis for Engineering Design 32 1 (1997): 47-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030646344&partnerID=MN8TOARS.
  136. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Marques, A.T.; De Castro, P.M.S.T.. "Modeling compression failure after low velocity impact on laminated composites using interface elements". Journal of Composite Materials 31 15 (1997): 1462-1479. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030688730&partnerID=MN8TOARS.
  137. Magalhães, A.G.; Marques, A.T.; Oliveira, F.M.F.; Soukatchoff, P.; De Castro, P.T.. "Mechanical behaviour of cementitious matrix composites". Cement and Concrete Composites 18 1 (1996): 9-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029733906&partnerID=MN8TOARS.
    10.1016/0958-9465(95)00035-6
  138. Goncalves, J.P.M.; Oliveira, F.M.F.; de Castro, P.M.S.T.; Fernandes, A.A.. "Application of the thermoelastic effect to the stress analysis of structural adhesive connections". American Society of Mechanical Engineers, Design Engineering Division (Publication) DE 83 2 Pt 1 (1995): 277-281. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029429006&partnerID=MN8TOARS.
  139. GONCALVES, JPM; OLIVEIRA, FMF; DECASTRO, PMS; FERNANDES, AA. "A CALIBRATION OF THE STRESS STATE MEASUREMENT TECHNIQUE USING THE THERMOELASTIC EFFECT". RECENT ADVANCES IN EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (1994): https://publons.com/wos-op/publon/44253999/.
  140. Simoes, J.A.O.; Marques, A.T.; de Castro, P.M.S.T.. "Simulation of the geodesic and non-geodesic trajectories of the filament winding". Proceedings of the International Conference on Advanced Composite Materials (1993): 449-453. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027870781&partnerID=MN8TOARS.
  141. de Melo, F.J.M.Q.; de Castro, P.M.S.T.. "A reduced integration mindlin beam element for linear elastic stress analysis of curved pipes under generalized in-plane loading". Computers and Structures 43 4 (1992): 787-794. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026856312&partnerID=MN8TOARS.
    10.1016/0045-7949(92)90523-3
  142. Oliveira, C.A.M.; de Melo, F.J.M.Q.; de Castro, P.M.S.T.. "The elastic analysis of arbitrary thin shells having part-through cracks, using the integrated line spring and the semiloof shell elements". Engineering Fracture Mechanics 39 6 (1991): 1027-1035. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025798397&partnerID=MN8TOARS.
    10.1016/0013-7944(91)90109-E
  143. de Melo, F.J.M.Q.; de Castro, P.M.S.T.. "The stress and flexibility analysis of thin-walled curved pipes under out-of-plane bending with the semi-membrane ring element". International Journal of Pressure Vessels and Piping 41 2 (1990): 159-167. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025210773&partnerID=MN8TOARS.
    10.1016/0308-0161(90)90038-J
  144. JORGE, LDA; MARQUES, AT; DECASTRO, PMST. "THE INFLUENCE OF PRESTRESSING ON THE MECHANICAL-BEHAVIOR OF UNIDIRECTIONAL COMPOSITES". Developments in the Science and Technology of Composite Materials (1990): https://publons.com/wos-op/publon/44254187/.
  145. DEMELO, FJMO; OLIVEIRA, CAM; DECASTRO, PMST. "THE CALCULATION OF STRESS INTENSITY FACTORS NEAR PART-THROUGH CRACKS USING THE INTEGRATED LINE SPRING ELEMENT". Numerical Methods in Fracture Mechanics (1990): https://publons.com/wos-op/publon/44254005/.
  146. de Melo, F.J.M.Q.; de Castro, P.M.S.T.. "A semi-membrane ring element for the linear elastic stress analysis of pipe elbows under in-plane bending". International Journal of Pressure Vessels and Piping 38 4 (1989): 309-319. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024881015&partnerID=MN8TOARS.
    10.1016/0308-0161(89)90080-X
  147. Rebelo, C.A.C.C.; Marques, A.T.; de Castro, P.M.S.T.. "FRACTURE CHARACTERIZATION OF COMPOSITES IN MIXED MODE LOADING.". (1986): 2195-2204. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022839393&partnerID=MN8TOARS.
  148. De Castro, P.M.S.T.. "R-curve behaviour of a structural steel". Engineering Fracture Mechanics 19 2 (1984): 341-357. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021120065&partnerID=MN8TOARS.
    10.1016/0013-7944(84)90028-6
  149. Duarte, J.A.O.F.; Oliveira, F.M.F.; de Castro, P.M.S.T.. "FAILURE ANALYSIS OF AN EYEBAR.". (1984): 569-580. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021730106&partnerID=MN8TOARS.
  150. Fernandes, A.A.; Antunes, V.T.A.; de Castro, P.M.S.T.. "STUDY ON THE FATIGUE FAILURE OF A COBALT HARDFACED STEEL SHAFT.". (1984): 581-590. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021666971&partnerID=MN8TOARS.
  151. De Castro, P.M.S.T.; Spurrier, J.; Hancock, P.. "Comparison of J testing techniques and correlation J-COD using structural steel specimens". International Journal of Fracture 17 1 (1981): 83-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-0019529883&partnerID=MN8TOARS.
    10.1007/BF00043122
  152. Radon, J.C.; de Castro, P.M.S.T.; Culver, L.E.. "CHARACTERISATION OF TOUGHNESS DURING SLOW CRACK GROWTH IN A MILD STEEL.". Periodica Polytechnica, Mechanical Engineering 24 1-2 (1980): 7-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-0019263790&partnerID=MN8TOARS.
  153. de Castro, P.M.S.T.; Spurrier, J.; Hancock, P.. "CORRELATION BETWEEN THICKNESS AND CRACK LENGTH AS A MEANS OF ACHIEVING PLANE STRAIN CONDITIONS.". (1980): 87-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-0019095506&partnerID=MN8TOARS.
  154. de Castro, P.M.S.T.; Radon, J.C.; Culver, L.E.. "J-resistance curve and ductile tearing of a mild steel". International Journal of Fatigue 1 3 (1979): 153-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-49249148467&partnerID=MN8TOARS.
    10.1016/0142-1123(79)90005-7
  155. de Castro, P.M.S.T.; Spurrier, J.; Hancock, P.. "EXPERIMENTAL STUDY OF THE CRACK LENGTH/SPECIMEN WIDTH (a/W) RATIO DEPENDENCE OF THE CRACK OPENING DISPLACEMENT (COD) TEST USING SMALL-SCALE SPECIMENS.". ASTM Special Technical Publication 677 (1979): 486-497. http://www.scopus.com/inward/record.url?eid=2-s2.0-0018768276&partnerID=MN8TOARS.
  156. Culver, L.E.; de Castro, P.; Radon, J.C.. "J INTEGRAL APPROACH TO SLOW CRACK GROWTH UNDER MONOTONIC LOADING OF A MILD STEEL.". Congr on Mater Test, 7th, Lect v 1 (1978): 63-65. http://www.scopus.com/inward/record.url?eid=2-s2.0-0018115314&partnerID=MN8TOARS.
Preface / Postscript
  1. Paulo M. S. T. de Castro. "Forward". Preface to Stefan Dan Pastrama, "Strength of materials 2", Bucuresti : Matrix Rom, 2019. Bucuresti, Romania: Matrix Rom. 2019.
    Published
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2012 - 2015 Advanced methodologies for the assessment of the fatigue behaviour of railway bridges
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2011 - 2014 Wheel/rail materials fatigue crack propagation behaviour
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2008 - 2012 Residual stress effects and damage tolerance behaviour of integral lightweight structures manufactured by FSW and HSM
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2008 - 2011 Design and Advanced Manufacturing of Aircraft Structures using Friction Stir Welding
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2005 - 2008 Lightweight Stiffened Panels: Mechanical Characterization of Emerging Fabrication Technologies
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
1997 - 2000 Contribuições para a Análise Numérica e Experimental do Comportamento de Juntas de Sobreposição Simples (title in the database RENATES is incorrect)
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
1996 - 1999 Aplicação de Técnicas de Emissão Acústica e Radiografia na Caracterização do Dano Produzido por Fluência em Juntas de Materiais Compósitos Sujeitas a Diferentes Condições Ambientais ( Please note that the record in https://renates2.dgeec.mec.pt/ppsqdet.asp contains several mistakes, including the title of this thesis)
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
1996 - 1999 Método dos Elementos Fronteira de Trefftz Aplicado à Mecânica da Fractura
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
1994 - 1997 Estudo do comportamento à compressão de materiais compósitos
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
1985 - 1988 Análise de Tensões em Acessórios Tubulares de Parede Fina Podendo Possuir Defeitos de Penetração Parcial
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2016 - 2016 Workshop on fatigue of aeronautical materials & structures, chaired by Paulo M.S.T. de Castro, within the 6th EASN International Conference on Innovation in European Aeronautics Research, October 18-21, 2016, Porto, Portugal. (2016 - 2016)
Congress (Member of the Organising Committee)
 European Aeronautics Science Network - EASN, Greece
2014 - 2014 XIV Portuguese Conference on Facture – PCF 2014, SPM-Portuguese Society of Materials-Fracture Division, University of Trás-os-Montes e Alto Douro-UTAD, Hotel Régua Douro, February 6-7, 2014. P.M.S.T. de Castro, membro da comissão científica. (2014 - 2014)
Congress (Member of the Scientific Committee)
 Universidade de Trás-os-Montes e Alto Douro, Portugal
2012 - 2012 1st International Conference of the Int. Journal of Structural Integrity IJSI-2012, FEUP, Porto, Portugal, June 25-28, 2012, under the sponsorship of EASN – European Aeronautics Science Network, SPM – Sociedade Portuguesa de Materiais et al.; organizing team: Chris Rodopoulos (Monash Univ.), Fernanda Fonseca, Lucas F.M. da Silva, Paulo M.S.T. de Castro (chair), Pedro M.G.P. Moreira, Sérgio M.O. Tavares, Valentin Richter-Trummer (2012 - 2012)
Congress (President of the Organising Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
2012 - 2012 XIII Portuguese Conference on Fracture, SPM, Coimbra, February 2-3, 2012 (P.M.S.T. de Castro, member of the Organizing Committee) (2012 - 2012)
Congress (Member of the Organising Committee)
 Universidade de Coimbra, Portugal
2010 - 2010 CIFIE 2010 – Iberian Conference on Fracture and Structural Integrity, FEUP, Portugal, March 17-19, 2010 (2010 - 2010)
Congress (President of the Organising Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
2006 - 2006 8th Mesomechanics Conference, Porto, Portugal, (co-organizador, com G. C. Sih), July 19-22, 2006 (2006 - 2006)
Conference (Co-organisor)
 Universidade do Porto Faculdade de Engenharia, Portugal
1998 - 1998 6as Jornadas de Fractura da SPM - Porto, (comissão organizadora: C A G Moura Branco, A A Fernandes, P M S T de Castro, J A Martins Ferreira), 10-11/2/1998. (1998 - 1998)
Congress (President of the Organising Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
1997 - 1997 Conferência 'Sistemas de Transportes Urbanos', Porto, INETI, 27-28/1/1997 (co-organizadores: A A Fernandes, A T Marques, M Rosado, P A G Castro). (1997 - 1997)
Seminar (Member of the Organising Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
1996 - 1996 3as Jornadas Ibéricas de Fractura, Luso, Portugal, (comissão: C A G Moura Branco, J A Martins Ferreira, P M S T de Castro, Manuel Elices Calafat, Javier Llorca, Manuel Fuentes Perez), 27-29 de Março de 1996 (1996 - 1996)
Congress (Member of the Organising Committee)
 Sociedade Portuguesa de Materiais, Portugal
1995 - 1995 Symposium on Risk and Economic Evaluation on Failure and Malfunction of Systems, Workshop on Cost and Insurance Assessment of Failures, ISTLI and SPM, (comissão: chairman L Faria; F Pina da Silva, P M S T de Castro, A Sousa e Brito), Lisbon, 30 October - 1 November 1995 (1995 - 1995)
Symposium (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal
1994 - 1994 5as Jornadas de Fractura da SPM - Lisboa, (comissão organizadora: C A G Moura Branco, A A Fernandes, P M S T de Castro, J A Martins Ferreira), 11-12/4/1994 (1994 - 1994)
Congress (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal
1991 - 1991 4as Jornadas de Fractura da SPM - Lisboa, (comissão organizadora: C A G Moura Branco-Presidente, L Faria, A A Fernandes, P M S T de Castro, J A Martins Ferreira), 1-2/10/1991 (1991 - 1991)
Congress (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal
1990 - 1990 Jornadas sobre Projecto, Manutenção e Gestão de Veículos de Transporte Colectivo de Passageiros, Porto, 28-30/5/1990 (co-organizadores: A A Fernandes, A T Marques, P A G Castro) (1990 - 1990)
Seminar (Member of the Organising Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
1989 - 1989 3as Jornadas de Fractura da SPM - Lisboa, (comissão organizadora: C A G Moura Branco, L Faria, A A Fernandes, P M S T de Castro, J A Martins Ferreira), 14-15/11/1989 (1989 - 1989)
Congress (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal
1986 - 1986 2as Jornadas de Fractura da SPM - Porto, (comissão local de organização: C A G Moura Branco, A A Fernandes, P M S T de Castro), 10-11/12/1986 (1986 - 1986)
Congress (President of the Organising Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
1984 - 1984 V European Conference on Fracture - ECF5, (comissão: chairman L Faria; C A G M Branco, P M S T de Castro, A A Fernandes, M M Freitas, A A Osório, A Pádua Loureiro, Luís Guerra Rosa, Antera Valeriana de Seabra), Lisboa, 17-21 de Setembro de 1984 (1984 - 1984)
Congress (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal
1983 - 1983 1as Jornadas de Fractura da SPM - Lisboa, com a designação: Colóquio sobre os Materiais e o Projecto Mecânico; comissão organizadora: L Faria, C A G Moura Branco, A A Fernandes, Antera Valeriana de Seabra, A Pádua Loureiro, António Osório, Manuel Freitas, Luís Guerra Rosa), 27-28/10/1983 (1983 - 1983)
Congress (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal

Committee member

Activity description
Role 		Institution / Organization
2018 - 2021 member of the Scientific Committee of the European Union Clean Sky programme, 2018-2021. https://innovair.org/wp-content/uploads/2018/01/Clean-Sky-Scientific-Committee-2018-2020.pdf
Member
 European Union, Belgium
Distinctions

Award

2008 Prémio de Incentivo à Investigação
Universidade do Porto Faculdade de Engenharia, Portugal

Other distinction

2018 Medal - Spanish Fracture Group
Grupo Español de Fractura , Spain
2017 Publons Peer Review Awards 2017, Engineering
2017 Publons Peer Review Awards 2017, Materials Science
2017 ‘Reviewer Certificate’ Fatigue & Fracture of Engineering Materials & Structures, 2016 (Youshi Hong, Chief Editor, 22 June 2017)
2017 FEUP mérito pedagógico - Pedagogical merit, awarded at FEUP on January 13, 2017 (‘dia da FEUP’).
Universidade do Porto Faculdade de Engenharia, Portugal
2016 FEUP mérito pedagógico - Pedagogical merit, awarded at FEUP on January 13, 2016 (‘dia da FEUP’).
Universidade do Porto Faculdade de Engenharia, Portugal
2016 SPM - Sociedade Portuguesa de Materiais - Scientific Merit, Scientific Merit medal, awarded 'in recognition of scientific contributions during his career', at PCF 2016 (Portuguese Conference on Fracture), February 11, 2016.
Sociedade Portuguesa de Materiais, Portugal
2016 journal Theoretical and Applied Fracture Mechanics, ‘Highly Cited Paper’ award on Dec. 20, 2016 to: S.M.O. Tavares, J.F. dos Santos, P.M.S.T. de Castro, ‘Friction stir welded joints of Al–Li alloys for aeronautical applications', 65, 2013, pp.8-13
2013 2013 'Highly Commended Paper Award', International Journal of Structural Integrity.
2012 Prémio Engª Cruz Azevedo 2011 para os melhores artigos publicados na Revista Mecânica Experimental da APAET em 2010 e 2011
2008 member of editorial board, International Journal of Structural Integrity
2004 eleição para membro correspondente / elected member of the Portuguese Academy of Sciences
2004 eleição para membro do / elected member of ASME Mech Eng Departments Heads Committee
The American Society of Mechanical Engineers, United States
2004 member of editorial board, Mechanika
2001 member of editorial board, Fatigue and Fracture of Engineering Materials and Structures
1998 eleição para membro do / elected member of ASME Board on Professional Practice and Ethics