???global.info.a_carregar???
Ana Queirós Barbosa is an experienced professional with a strong background in Materials Engineering, holding an MSc from FEUP (2008) and a PhD (2017) with an FCT individual grant. Her doctoral research focused on using cork powder as a reinforcement material for brittle adhesives, work that was awarded the best presentation prize at the AB2011 conference. Since completing her PhD, she has dedicated herself to research and development, resulting in two patents in partnership with Spanish universities (Comillas and Carlos III). As a member of LAETA/INEGI, she continued to deepen her expertise in the mechanical properties of adhesives and advanced joining processes within INEGI's Advanced Joining Processes Unit (AJPU), where she has served as Business Development Coordinator since 2019. Her extensive experience in this capacity allows her to represent INEGI in European meetings (EARPA) focused on optimization in the automotive sector and to actively participate in educational projects and scientific dissemination activities, including involvement in scientific committees of materials and adhesive bonding conferences and invited lectures on adhesive bonding. She recently secured an employment contract with FCT under the Scientific Employment Incentive program. With a distinguished and growing publication record, including 39 documents indexed in Scopus, over 950 citations, and an h-index of 19 (as of July 29, 2025), she demonstrates a solid and impactful scientific contribution. She has also authored 2 books and 2 book chapters. In addition to research, in the last three years, she has also acted as a project manager and project consultant. She was also the Principal Investigator of a project funded by FCT aimed at developing functionally graded adhesive joints using magnetized micro-particles. Since 2024, she has been a Project Manager at EWF (European Federation for Welding, Joining and Cutting), where she leads initiatives in Additive Manufacturing (AM), laser texturing, and welding.
Read full resume ↓
Identification

Personal identification

Full name
Ana Sofia Oliveira Queirós Ferreira Barbosa

Citation names

  • Barbosa, Ana

Author identifiers

Ciência ID
F110-513A-74B1
ORCID iD
0000-0002-1661-9989

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Materials Engineering - Materials Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Upper intermediate (B2) Proficiency (C2) Upper intermediate (B2) Proficiency (C2) Advanced (C1)
Spanish; Castilian Intermediate (B1) Advanced (C1) Intermediate (B1) Advanced (C1) Advanced (C1)
French Beginner (A1) Beginner (A1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2025/04/11
Concluded
 CU 00: Additive Manufacturing Process Overview (Curso de Especialização Tecnológica)
International Additive Manufacturing Qualification System, Portugal
 100
2021/03/17 - 2021/05/26
Concluded
 Technology and Innovation Management (Postgraduate Certificate)
University of Cambridge, United Kingdom
2019/05/07 - 2019/05/22
Concluded
 Essential Project Management (Curso de Especialização Tecnológica)
Associação Portuguesa de Gestão e Engenharia Indutrial, Portugal
2017
Concluded
 Programa Doutoral em Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
"Improved toughness of adhesives filled with cork micro particles" (THESIS/DISSERTATION)
 aprovada
2014 - 2014
Concluded
 Selecção e Ensaio de Materiais (Curso de doutoramento (conclusão de unidades curriculares))
Faculdade de Engenharia da Universidade do Porto, Portugal
2010 - 2011
Concluded
 Fadiga e Mecânica da Fractura (Curso de doutoramento (conclusão de unidades curriculares))
Major in Mecânica
Faculdade de Engenharia da Universidade do Porto, Portugal
2010 - 2011
Concluded
 Juntas Adesivas Estruturais (Curso de doutoramento (conclusão de unidades curriculares))
Faculdade de Engenharia da Universidade do Porto, Portugal
 16
2010 - 2011
Concluded
 Mecânica Experimental (Curso de doutoramento (conclusão de unidades curriculares))
Major in Mecânica
Faculdade de Engenharia da Universidade do Porto, Portugal
2010 - 2011
Concluded
 Métodos de Aproximação em Engenharia (Curso de doutoramento (conclusão de unidades curriculares))
Faculdade de Engenharia da Universidade do Porto, Portugal
2010 - 2010
Concluded
 Simulação de Processos Tecnológicos (Curso de doutoramento (conclusão de unidades curriculares))
Faculdade de Engenharia da Universidade do Porto, Portugal
2009 - 2009
Concluded
 CAD 2D – Peças e Conjuntos com Geometria Simples (Curso de Especialização Tecnológica)
Idit-instituto De Desenvolvimento E Inovação Tecnológica, Portugal
2009 - 2009
Concluded
 NAFEMS Awareness Seminar – Finite Elements and NUmerical Optimization in Engeneering (Curso de Especialização Tecnológica)
Universidade de Aveiro, Portugal
2008 - 2008
Concluded
 Formação inicial de formadores (Curso de Especialização Tecnológica)
Fundação para a Divulgação das Tecnologias de Informação Delegação Distrital do Porto, Portugal
2008
Concluded
 Mestrado Integrado em Engenharia Metalúrgica e Materiais (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Efeito do crómio na microestrutura e no comportamento ao desgaste abrasivo de ferros fundidos" (THESIS/DISSERTATION)
 13
2007 - 2007
Concluded
 Solidworks (Curso de Especialização Tecnológica)
CINFU - Centro de Formação Profissional da Indústria de Fundição, Portugal
Affiliation

Science

Category
Host institution 		Employer
2024/01/01 - Current Science and Technology Management European Federation for Welding, Joining And Cutting (EWF), Portugal
European Federation for Welding, Joining And Cutting (EWF), Portugal
2018/06/27 - Current Auxiliary Researcher (Research) Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2018/07/01 - 2021/06/01 Science and Technology Management Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2017/04/01 - 2018/06/30 Researcher (Research) Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2013 - 2017 Researcher (Research) Associated Laboratory for Energy Transports and Aeronautics, Portugal
2010 - 2013 Researcher (Research) Associated Laboratory for Energy Transports and Aeronautics, Portugal
2006/09/01 - 2008/09/01 Researcher (Research) Universidade do Porto, Portugal
2005/09/01 - 2006/09/01 Researcher (Research) Universidade do Porto Faculdade de Engenharia, Portugal

Other Careers

Category
Host institution 		Employer
2009/09/01 - 2010/01/01 Técnico Superior (Técnico Superior) CINFU - Centro de Formação Profissional da Indústria de Fundição, Portugal
2008/07/01 - 2009/07/01 Técnico Superior (Técnico Superior) Grohe Portugal - Componentes Sanitários, Lda, Portugal
Projects

Grant

Designation Funders
2024/01/01 - 2026/12/31 DIgital LAser PROduction: Digital Twins of Laser Processing for Multi-Capability Manufacturing of Complex Components and Certification
101138859
Science and Technology Management Fellow
European Federation for Welding, Joining And Cutting (EWF), Portugal
Ongoing
2022/10/01 - 2026/03/31 Boosting the adoption of Ultrashort Pulsed Laser large scale structuring with an agile, dexterous and efficient manufacturing platform
101058409
Science and Technology Management Fellow
European Federation for Welding, Joining And Cutting (EWF), Portugal
Ongoing
2021/12/01 - 2023/11/30 Boosting Knowledge of Adhesive Bonding Personnel
2021 1 PT01 KA220 VET 000033229
Science and Technology Management Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Ongoing
2021/08/01 - 2022/08/30 A smart and eco-friendly adhesively bonded structure for the next generation mobility platforms (SmartEcoStruct)
PTDC/EME-EME/6442/2020
Post-doc Fellow
Ongoing
2013/04/01 - 2017/03/31 Improved toughness of adhesives filled with cork micro particles
Bolsa SFRH/BD/88173/2012
PhD Student Fellow
Associação para a Inovação e Desenvolvimento da FCT
2005/10/01 - 2006/09/30 Tratamento de tumores sólidos por Termoterapia Altamente Focalizada
UP/CGD/08
Scientific Initiation Fellow
Universidade do Porto / Caixa Geral de Depósitos
Concluded

Contract

Designation Funders
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/UIDB/50022/2020
10.54499/UIDP/50022/2020
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2023/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UIDB/50022/2020
10.54499/UIDB/50022/2020
LA/P/0079/2020
10.54499/LA/P/0079/2020
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/07/02 - 2021/12/31 Juntas adesivas graduadas com aplicação de micro partículas de cortiça
PTDC/EME-EME/28035/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2018/07/02 - 2021/07/01 MagAdhesive .: Juntas adesivas graduadas com aplicação de micro partículas de cortiça
POCI-01-0145-FEDER-028035
Principal investigator
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Ongoing
2010/03/01 - 2013/02/28 AUMENTO DA TENACIDADE DE ADESIVOS COM MICRO PARTÍCULAS DE CORTIÇA
PTDC/EME-TME/098752/2008
PhD Student Fellow
Faculdade de Engenharia da Universidade do Porto, Portugal
Concluded
2006/09/01 - 2008/09/01 Projecto DECOLA - Efeito do crómio na microestrutura e no comportamento ao desgaste abrasivo de ferros fundidos
POCI 2010-IDEIA Nº 13-05-04 FDR00015 Agência Inovação
Research Fellow
Faculdade de Engenharia da Universidade do Porto, Portugal
 Agência Nacional de Inovação SA
Concluded

Other

Designation Funders
2021/01/01 - 2023/12/31 FIBRE composite manufacturing technologies FOR the automation and modular construction in shipYARDS
101006860
Research Technician Fellow
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 European Commission
Ongoing
Outputs

Publications

Book
  1. Lucas Filipe Martins da Silva; Barbosa, Ana; Carbas, Ricardo; Eduardo André Sousa Marques; Akhavan-Safar, Alireza. Adhesive Bonding Technology and Testing. Wiley. 2023.
    Published
  2. Barbosa, Ana. Introduction to Adhesive Bonding. Wiley. 2021.
    In press
  3. Barbosa, A.Q.; da Silva, L.F.M.; Öchsner, A.; Marques, E.A.S.; Abenojar, J.. Micro cork particles as adhesive reinforcement material for brittle resins. 2017.
    10.1007/978-3-319-50784-2_30
Book chapter
  1. da Silva, Catarina I.; Barbosa, Ana Q.; Marques, José B.; Carbas, Ricardo J. C.; Marques, Eduardo A. S.; Abenojar, Juana; da Silva, Lucas F. M.. "Mechanical Characterisation of Graded Single Lap Joints Using Magnetised Cork Microparticles". In Advanced Structured Materials, 153-174. Springer Singapore, 2020.
    10.1007/978-981-15-2957-3_11
  2. Barbosa, A. Q.; da Silva, L. F. M.; Öchsner, A.; Marques, E. A. S.; Abenojar, J.. "Micro Cork Particles as Adhesive Reinforcement Material for Brittle Resins". In Materials Design and Applications, 399-418. Springer International Publishing, 2017.
    10.1007/978-3-319-50784-2_30
Conference paper
  1. Barbosa, A.Q.; Da Silva, L.F.M.; Carbas, R.C.; Abenojar, J.; Del Real, J.C.. "Influence of the size and amount of cork particles on the toughness of a structural adhesive". 2011.
Journal article
  1. Castro Sousa, Fernando; Akhavan-Safar, Alireza; Carbas, Ricardo J.C.; Marques, Eduardo A.S.; Barbosa, Ana Q.; da Silva, Lucas F.M.. "Experimental study on the influence of environmental conditions on the fatigue behaviour of adhesive joints". International Journal of Fatigue 175 (2023): 107752. http://dx.doi.org/10.1016/j.ijfatigue.2023.107752.
    10.1016/j.ijfatigue.2023.107752
  2. Beygi, R.; Carbas, R.J.C.; Barbosa, A.Q.; Marques, E.A.S.; da Silva, L.F.M.. "Buttering for FSW: Enhancing the fracture toughness of Al-Fe intermetallics through nanocrystallinity and suppressing their growth". Journal of Manufacturing Processes 90 (2023): 233-241. http://dx.doi.org/10.1016/j.jmapro.2023.02.001.
    10.1016/j.jmapro.2023.02.001
  3. Abenojar, J.; Lopez de Armentia, S.; Barbosa, A. Q.; Martinez, M. A.; del Real, J. C.; da Silva, L. F. M.; Velasco, F.. "Magnetic cork particles as reinforcement in an epoxy resin: effect of size and amount on thermal properties". Journal of Thermal Analysis and Calorimetry 148 5 (2022): 1981-1995. http://dx.doi.org/10.1007/s10973-022-11868-6.
    10.1007/s10973-022-11868-6
  4. Beygi, R; Akhavan-Safar, A; Carbas, R; Barbosa, AQ; Marques, EAS; da Silva, LFM. "Utilizing a ductile damage criterion for fracture analysis of a dissimilar aluminum/steel joint made by friction stir welding". Engineering Fracture Mechanics 274 (2022): 108775. http://dx.doi.org/10.1016/j.engfracmech.2022.108775.
    10.1016/j.engfracmech.2022.108775
  5. Delzendehrooy, F.; Akhavan-Safar, A.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Investigation of the mechanical performance of hybrid bolted-bonded joints subjected to different ageing conditions: Effect of geometrical parameters and bolt size". Journal of Advanced Joining Processes 5 (2022): 100098. http://dx.doi.org/10.1016/j.jajp.2022.100098.
    10.1016/j.jajp.2022.100098
  6. Delzendehrooy, F.; Akhavan-Safar, A.; Barbosa, A.Q.; Beygi, R.; Cardoso, D.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive review on structural joining techniques in the marine industry". Composite Structures 289 (2022): 115490. http://dx.doi.org/10.1016/j.compstruct.2022.115490.
    10.1016/j.compstruct.2022.115490
  7. Akhavan-Safar, A.; Salamat-Talab, M.; Delzendehrooy, F.; Barbosa, A. Q.; da Silva, L. F. M.. "Mode II fracture energy of laminated composites enhanced with micro-cork particles". Journal of the Brazilian Society of Mechanical Sciences and Engineering 43 11 (2021): http://dx.doi.org/10.1007/s40430-021-03220-0.
    10.1007/s40430-021-03220-0
  8. Beygi, R.; Carbas, R.; Queiros, A.; Marques, E. A. S.; Shi, R.; da Silva, L. F. M.. "Comparative Study Between Stainless Steel and Carbon Steel During Dissimilar Friction Stir Welding with Aluminum: Kinetics of Al–Fe Intermetallic Growth". Metals and Materials International (2021): http://dx.doi.org/10.1007/s12540-021-01070-y.
    10.1007/s12540-021-01070-y
  9. Beygi, R.; Carbas, R.; Queiros, A.; Marques, E. A. S.; Shi, R.; da Silva, L. F. M.. "Comparative Study Between Stainless Steel and Carbon Steel During Dissimilar Friction Stir Welding with Aluminum: Kinetics of Al–Fe Intermetallic Growth". Metals and Materials International 28 8 (2021): 1948-1959. http://dx.doi.org/10.1007/s12540-021-01070-y.
    10.1007/s12540-021-01070-y
  10. Beygi, R.; Carbas, R.J.C; Barbosa, A.Q.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of ¿ and steel in aluminum/steel joints made by FSW: Microstructure and fracture behavior". Materials Science and Engineering: A 824 (2021): 141812. http://dx.doi.org/10.1016/j.msea.2021.141812.
    10.1016/j.msea.2021.141812
  11. da Silva, C.I.; Cunha, M.R.O.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Functionally graded adhesive joints using magnetic microparticles with a polyurethane adhesive". Journal of Advanced Joining Processes 3 (2021): 100048. http://dx.doi.org/10.1016/j.jajp.2021.100048.
    10.1016/j.jajp.2021.100048
  12. da Silva, C.I.; Cunha, M.R.O.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Functionally graded adhesive joints using magnetic microparticles with a polyurethane adhesive". Journal of Advanced Joining Processes 3 (2021): 100048. http://dx.doi.org/10.1016/j.jajp.2021.100048.
    10.1016/j.jajp.2021.100048
  13. Barbosa, Ana. "Mode II fracture energy of laminated composites enhanced with micro cork particles". Journal of Reinforced Plastics and Composites (2021):
    Under revision
  14. Barbosa, Ana. "European Adhesive Bonder A Targeted Training for Portuguese Professionals Harmonized with European Directives". U.Porto Journal of Engineering 7 1 (2021): 37-47. https://journalengineering.fe.up.pt/article/view/2183-6493_007.001_0006/474.
    Published
  15. Barbosa, Ana; Da Silva, Lucas; Loureiro, Ana; Marques, Eduardo; Carbas, Ricardo; De Barros, Sílvio. "European Adhesive Bonder". U.Porto Journal of Engineering 7 1 (2021): 37-47. http://dx.doi.org/10.24840/2183-6493_007.001_0006.
    10.24840/2183-6493_007.001_0006
  16. Shang, X.; Marques, E.A.S.; Carbas, R.J.C.; Barbosa, A.Q.; Jiang, D.; da Silva, L.F.M.; Chen, D.; Ju, S.. "Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension". Composite Structures 251 (2020): 112639. http://dx.doi.org/10.1016/j.compstruct.2020.112639.
    10.1016/j.compstruct.2020.112639
  17. da Silva, CI; Barbosa, AQ; Carbas, RJC; Marques, EAS; Akhavan-Safar, A; da Silva, LFM. "Influence of cork microparticles on the fracture type in single lap joints". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622093672. http://dx.doi.org/10.1177/0954406220936729.
    10.1177/0954406220936729
  18. Abenojar, J.; López de Armentia, S.; Barbosa, A. Q.; Martínez, M. A.; Velasco, F.; da Silva, L. F. M.; del Real Romero, J. C.. "Coating cork particles with iron oxide: effect on magnetic properties". Wood Science and Technology 54 4 (2020): 869-889. http://dx.doi.org/10.1007/s00226-020-01191-4.
    10.1007/s00226-020-01191-4
  19. Barbosa, Ana. "Influence of micro cork particles on the lap shear strength of an epoxy adhesive subjected to fatigue loading and different environmental conditions". Part L: Journal of Materials: Design and Applications (2020):
    Submitted
  20. Barbosa, Ana. "Magnetizing cork particles through a co-precipitated coating". Wood Science and Technology (2020): DOI: 10.1007/s00226-020-01191-4.
    Submitted
  21. Machado, J. J. M.; Marques, E. A. S.; Barbosa, A. Q.; da Silva, Lucas F. M.. "Influence of hygrothermal aging on the quasi-static and impact behavior of single lap joints using CFRP and aluminum substrates". Mechanics of Advanced Materials and Structures (2019): 1-12. http://dx.doi.org/10.1080/15376494.2019.1675104.
    10.1080/15376494.2019.1675104
  22. Marques, J.B.; Barbosa, A.Q.; da Silva, C.I.; Carbas, R.J.C.; da Silva, L.F.M.. "An overview of manufacturing functionally graded adhesives – Challenges and prospects". The Journal of Adhesion (2019): 1-35. http://dx.doi.org/10.1080/00218464.2019.1646647.
    10.1080/00218464.2019.1646647
  23. Machado, J. J. M.; Marques, E. A. S.; Barbosa, A. Q.; Silva, L. F. M.. "Fatigue performance of single lap joints with CFRP and aluminium substrates prior and after hygrothermal aging". Fatigue & Fracture of Engineering Materials & Structures (2019): http://dx.doi.org/10.1111/ffe.13067.
    10.1111/ffe.13067
  24. Machado, J.J.M.; Marques, E.A.S.; Barbosa, A.Q.; da Silva, Lucas F.M.. "Effect of hygrothermal aging on the quasi-static behaviour of CFRP joints varying the overlap length". Composite Structures (2019): http://dx.doi.org/10.1016/j.compstruct.2019.02.035.
    10.1016/j.compstruct.2019.02.035
  25. Barbosa, Ana. "Influence of hygrothermal ageing on the quasi-static and impact behaviour of single lap joints using CFRP and aluminium substrates". Mechanics of Advanced Materials and Structures (2019):
    Submitted
  26. Barbosa, Ana. "Influence of temperature and fatigue loading on the lap shear strength of an epoxy adhesive enhanced with micro cork particles". International Journal of Composite Materials (2019):
    Submitted
  27. Akhavan-Safar, Alireza; Barbosa, Ana Queirós; da Silva, Lucas Filipe Martins; Ayatollahi, Majid Reza. "Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction". Frattura ed Integrità Strutturale 12 46 (2018): 266-274. http://dx.doi.org/10.3221/igf-esis.46.24.
    Published • 10.3221/igf-esis.46.24
  28. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Barbosa, A.Q.; de Barros, S.; Viana, G.. "Effect of water on the behaviour of adhesives modified with thermally expandable particles". International Journal of Adhesion and Adhesives 84 (2018): 250-256. http://dx.doi.org/10.1016/j.ijadhadh.2018.04.002.
    10.1016/j.ijadhadh.2018.04.002
  29. Rodrigues, Tânia A. F.; Chaves, Filipe J. P.; Silva, Lucas F. M. da; Costa, Marcelo; Barbosa, Ana Q.. "Determination of the fracture envelope of an adhesive joint as a function of moisture". Materialwissenschaft und Werkstofftechnik 48 11 (2017): 1181-1190. http://dx.doi.org/10.1002/mawe.201700571.
    10.1002/mawe.201700571
  30. Barbosa, A.Q.; da Silva, L.F.M.; Abenojar, J.; Figueiredo, M.. "Analysis of the effect of size, amount and surface treatment on the tensile strain of a brittle adhesive reinforced with micro cork particles". Applied Adhesion Science 5 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85032967717&partnerID=MN8TOARS.
    10.1186/s40563-017-0088-6
  31. Barbosa, A.Q.; da Silva, L.F.M.; Abenojar, J.; Figueiredo, M.; Öchsner, A.. "Toughness of a brittle epoxy resin reinforced with micro cork particles: Effect of size, amount and surface treatment". Composites Part B: Engineering 114 (2017): 299-310. http://www.scopus.com/inward/record.url?eid=2-s2.0-85012965403&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.10.072
  32. Barbosa, A.Q.; Da Silva, L.F.M.; Banea, M.D.; Öchsner, A.. "Methods to increase the toughness of structural adhesives with micro particles: An overview with focus on cork particles". Materialwissenschaft und Werkstofftechnik 47 4 (2016): 307-325. http://www.scopus.com/inward/record.url?eid=2-s2.0-84963628416&partnerID=MN8TOARS.
    10.1002/mawe.201600498
  33. Barbosa, A.Q.; Da Silva, L.F.M.; Abenojar, J.; Figueiredo, M.; Öchsner, A.. "Tensile Strength of a Brittle Epoxy Resin Reinforced with Micro Cork Particles: Effect of Size, Amount and Surface Treatment". Microscopy and Microanalysis 21 (2015): 9-10. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944047331&partnerID=MN8TOARS.
    10.1017/S1431927615013859
  34. Barbosa, A.Q.; Da Silva, L.F.M.; Abenojar, J.; Del Real, J.C.; Paiva, R.M.M.; Öchsner, A.. "Kinetic analysis and characterization of an epoxy/cork adhesive". Thermochimica Acta 604 (2015): 52-60. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922236556&partnerID=MN8TOARS.
    10.1016/j.tca.2015.01.025
  35. Barbosa, A.Q.; Da Silva, L.F.M.; Öchsner, A.. "Hygrothermal aging of an adhesive reinforced with microparticles of cork". Journal of Adhesion Science and Technology 29 16 (2015): 1714-1732. http://www.scopus.com/inward/record.url?eid=2-s2.0-84930078886&partnerID=MN8TOARS.
    10.1080/01694243.2015.1041358
  36. Barbosa, A.Q.; Da Silva, L.F.M.; Öchsner, A.. "Effect of the amount of cork particles on the strength and glass transition temperature of a structural adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 228 4 (2014): 323-333. http://www.scopus.com/inward/record.url?eid=2-s2.0-84930064378&partnerID=MN8TOARS.
    10.1177/1464420713493581
  37. Abenojar, J.; Barbosa, A.Q.; Ballesteros, Y.; Del Real, J.C.; Da Silva, L.F.M.; Martínez, M.A.. "Effect of surface treatments on natural cork: Surface energy, adhesion, and acoustic insulation". Wood Science and Technology 48 1 (2014): 207-224. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893709791&partnerID=MN8TOARS.
    10.1007/s00226-013-0599-7
  38. Barbosa, A.Q.; Da Silva, L.F.M.; Öchsner, A.; Abenojar, J.; Del Real, J.C.. "Utilization of microparticles of cork as reinforcing material for fragile structural adhesives | Utilização de micro partículas de cortiça como material de reforço em adesivos estruturais fràgeis". Ciencia e Tecnologia dos Materiais 25 1 (2013): 42-49. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901448753&partnerID=MN8TOARS.
    10.1016/j.ctmat.2013.12.004
  39. Barbosa, A.Q.; Da Silva, L.F.M.; Öchsner, A.; Abenojar, J.; Del Real, J.C.. "Influence of the size and amount of cork particles on the impact toughness of a structural adhesive". Journal of Adhesion 88 4-6 (2012): 452-470. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861142891&partnerID=MN8TOARS.
    10.1080/00218464.2012.660811
  40. Ribeiro, L.; Barbosa, A.; Viana, F.; Baptista, A. Monteiro; Dias, C.; Ribeiro, C.A.. "Abrasion wear behaviour of alloyed and chilled cast irons". Wear 270 7-8 (2011): 535-540. http://dx.doi.org/10.1016/j.wear.2011.01.008.
    10.1016/j.wear.2011.01.008
Thesis / Dissertation
  1. Barbosa, Ana. "Improved toughness of adhesives filled with cork micro particles". PhD, Faculdade de Engenharia da Universidade do Porto, 2017. https://repositorio-aberto.up.pt/handle/10216/103840.
  2. Barbosa, Ana Sofia Oliveira Queirós Ferreira. "Efeito do crómio na microestrutura e no comportamento ao desgaste abrasivo de ferros fundidos". Master, 2008. http://hdl.handle.net/10216/60144.

Intellectual property

Patent
  1. Barbosa, Ana. 2017. "Magnetization of cork particles for manufacturing components or composite materials". Spain.
    Granted/Issued
Provisional application for patent
  1. 2019. "Method and apparatus to manufacture functionally graded joints using magnetized micro particles".
    Protected
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2021/10/21 Mechanical performance of hybrid bolt bonded joints subjected to ageing conditions: Effects of leakage, ageing level, and overlap length AJP2021
FEUP (Sintra)
2021/10/07 Teaching adhesive bonding in mechanical engineering courses STE2021
FEUP (Porto)
2021/10/07 Women in Mechanical Engineering: a case study of the Faculty of Engineering of the University of Porto in the last 20 years STE2021
FEUP (Porto, Portugal)
2021/06 A comprehensive review on structural joining techniques in the marine industries AB2021
FEUP (Porto, Portugal)
2021/06 Effect of the amount of magnetized cork particles on the strength and glass transition temperature of a structural adhesive AB2021
FEUP (Porto, Portugal)
2020/11/05 Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension MDA 2020
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2020/03/06 Mechanical characterization of graded single lap joints using magnetised cork microparticles 1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL APPLICATIONS OF ADHESIVES 2020
FEUP (Funchal, Portugal)
2020/03/06 Study of the influence of microparticles of cork on the fracture type in single lap joints 1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL APPLICATIONS OF ADHESIVES 2020
FEUP (Funchal, Portugal)
2019/12/11 Palestra sobre processos de ligação de metais Juntas adesivas estruturais
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2019/09/17 Characterization of the mechanical behaviour of an epoxy filled with micro particles of magnetized cork xx Congress on Adhesion and Adhesives
Tecnalia (San sebastian, Spain)
2019/09/02 Effect of temperature and fatigue loading condition on shear lap strength of an epoxy adhesive reinforced with micro cork particles International Conference on Structural Integrity
Faculdade de Engenharia da Universidade do Porto (Funchal, Portugal)
2019/07/12 Development of an apparatus to manufacture graded joints using magnetized particles AB2019
FEUP (Porto, Portugal)
2019/07/11 Performance under fatigue loads of single lap joints using CFRP and aluminium substrates prior and after hygrothermal aging AB2019
FEUP (Porto, Portugal)
2019/07/11 The effect of size and amount of micro particles of magnetized cork on the mechanical properties of an epoxy AB2019
FEUP (Porto, Portugal)
2019/04/03 PhD feitos na indústria e faculdade. Vantagens e desvantagens. Casting Clinic CITNM
CITNM (Porto, Portugal)
2018/09/19 Effect of a particle oxidation surface treatment in the mechanical properties of epoxy adhesive reinforced of cork XIX Congresso Internacional de Adhesion Y Adhesivos
Universidade Carlos III de Madrid (Madrid, Spain)
2018/07/06 Fatigue behaviour of an epoxy reinforced with micro particles of cork: effect of the amount MDA 2018
faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2017/09/21 Strength of adhesive filled with micro natural cork particles: Effect of temperature and particles volume fraction XVIII CAA
Associacion enpañola de fabricantes de colas y adhesivos (Barcelona, Spain)
2017/09/20 Strength of adhesive filled with micro natural cork particles: Effect of temperature and particles volume fraction XVIII Congresso Nacional de Engenharia Mecânica e Industrial
Galoa (Barcelona, Spain)
2017/07/08 Influence of size, amount and surface treatment on a brittle epoxy toughened with micro cork pa Proceedings of the 2nd World Congress on Momentum, Heat and Mass Transfer
Faculdade de Engenharia do Porto (Porto, Portugal)
2017/07/06 Strength of adhesive filled with micro natural cork particles: Effect of temperature and particles volume fraction AB2017
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2017/07/06 Strength of adhesive filled with micro natural cork particles: Effect of temperature and particles volume fraction AB2017
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2017/06/08 Influence of size, amount and surface treatment on a brittle epoxy toughened with micro cork particles Doctoral Congress in Engineering
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2016/09/15 Influence of size, amount and surface treatment on a brittle epoxy toughened with micro cork particles XVII Congresso Internacional de Adhesion y Adhesivos
Escuela Técnica superior de Ingeniería y diseno industrial (Madrid, Spain)
2016/07/24 Overview of methods to increase the toughness of structural adhesives with micro particles: an with focus on cork particles IRF2016
faculdade de engenharia da Universidade do Porto (porto, Portugal)
2016/06/30 Characterization of a brittle epoxy toughened with micro cork particles: effect of size, amount and surface treatment MDA2016
faculdade de engenharia da universodade do porto (porto, Portugal)
2016/06/29 Influence of size, amount and surface treatment on toughness of a brittle epoxy resin reinforced with micro cork particles: an analysis of the fracture surfaces Microscopy and microanalysis in materials and life sciences
Universidade do Porto (porto, Portugal)
2016/06/01 BRITTLE STRUCTURAL ADHESIVES REINFORCED WITH MICROPARTICLES OF CORK CEM2016-Mechanical Engineering Conference
INEGI (Porto, Portugal)
2015/09/24 Taguchi analysis to the effect of size, amount and surface treatment of micro particles of cork on the strain of a brittle epoxy XVI Congresso de Adhesion y adhesivos
INESCOP Footwear Technological Institute (Elda, Spain)
2015/07/28 MICROPARTICLES OF CORK AS REINFORCEMENT MATERIAL IN BRITTLE STRUCTURAL ADHESIVES M2D2015
(Ponta Delgada, Portugal)
2015/06/12 Microparticles of cork as reinforcement material in brittle structural adhesive 1st Doctoral Congress in Engineering
faculdade de Engenharia da Universidade do Porto (porto, Portugal)
2014/11/07 The effect of size, amount and surface treatment of micro particles of cork on the tensile strength of a brittle epoxy INCOMAN'14
Sociedade Portuguesa de Microscopia (Porto, Portugal)
2014/10/24 Utilização de micro partículas de cortiça como material de reforço em adesivos estruturais frágeis Jornadas Cientificas sobre a cortiça e suas aplicações
(porto, Portugal)
2012/11 Influence of the amount of cork particles on the tensile strength of a structural adhesive CLBA 2012
Associação Brasileira de Adesão e Adesivos – ABAA (Rio de janeiro, Brazil)
2012/09 Influence of the amount of cork particles on the tensile strength and Tg of a structural adhesive XVIII Congresso de Adhesion y adhesivos
GEAA (Zaragoza, Spain)
2011/10/26 Influence of the size and amount of cork particles on the toughness of a structural adhesive Particles 2011
Eccomas (Barcelona, Spain)
2011/07/07 Influence of the size and amount of cork particles on the toughness of a structural adhesive 1st International Conference of Structural Adhesive Bonding
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2011/06/30 INFLUENCE OF CORK PARTICLES ON THE IMPACT STRENGTH OF ADHESIVES 16th International Conference on Composite Structures
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2011 Aplicación de la tecnología de plasma a materiales naturales MATCOMP-2011
(Girona, Spain)
2008/09/21 The effect of process conditions on the abrasion wear behaviour of alloy cast irons 1st International Conference on Abrasive Processes
Churchill College, Cambridge (Cambridge, United Kingdom)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2019/02/01 - 2019/07/30 Development of a process to obtain a graded distribution of particles along the overlap of adhesive single lap joints
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Faculdade de Engenharia da Universidade do Porto, Portugal
2017/05/01 - 2017/07/30 Étude du comportement mécanique d'adhésifs renforcés par des micro-particules de liège. Applications principalement dans le secteur automobile
Co-supervisor
Polytech Lille, France
2013/02/01 - 2013/07/30 The effect of moisture in adhesives reinforced with micro particles of cork
Supervisor
 Engenharia Mecânica (Scientific initiation)
Faculdade de Engenharia da Universidade Federal de Juiz de Fora, Brazil
2013/02/01 - 2013/07/30 The effect of moisture in adhesives reinforced with micro particles of cork
Supervisor
 Engenharia Mecânica (Scientific initiation)
Faculdade de Engenharia da Universidade federal da Bahia, Brazil

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2022/06/03 Desenvolvimento de Bio-Laminados Eco-eficientes em fibra de carbono para a reabilitação e reforço de estruturas
(Thesis) Arguer
 Marina Machado Leal dos Santos (PhD)
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
2020/11 CARACTERIZAÇÃO DAS PROPRIEDADES MECÂNICAS DE UM ADESIVO ESTRUTURAL REFORÇADO COM PARTÍCULAS DE CORTIÇA EXPANDIDA
(Thesis) Main arguer
 Miguel Ângelo Pinheiro Figueiras (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020/11 CARATERIZAÇÃO DAS PROPRIEDADES MECÂNICAS DE UM ADESIVO ESTRUTURAL MODIFICADO COM PÓ DE CORTIÇA EXPANDIDA
(Thesis) Main arguer
 Pedro Jorge de Jesus Monteiro (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020/07/20 Uso de métodos sem malha para a previsão de resistência de juntas adesivas
(Thesis) Main arguer
 Rúben Filipe Pinho Resende (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020/01/17 Aplicacion de la tecnologia de adesivos en estruturas multimaterial: Empleo de adesivos Tenaces
(Thesis) Main arguer
 Pedro Gálvez Villarino (PhD)
Universidad Carlos III de Madrid, Spain
2019/11/04 Estudo experimental e numérico de juntas adesivas em degrau com dois adesivos
(Thesis) Main arguer
 Tiago Oliveira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018/11/07 Estudo experimental e numérico de juntas adesivas em degrau com dois adesivos
(Thesis) Main arguer
 CELSO LOPES FERREIRA (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Association member

Society Organization name Role
2012/01/03 - Current Associação Portuguesa de Adesão e Adesivos (APAA) Sócio Ordinário e Tesoureira

Conference scientific committee

Conference name Conference host
2019/12/19 - Current A Conferência Luso-Brasileira de Adesão e Adesivos Associação Brasileira de Adesão e Adesivos
2019/06/24 - Current International Conference on Science and technology education Porto
2017/09/01 - Current XVIII Congress of Adhesion and Adhesives Barcelona
2016/09/01 - Current XVII Congress of Adhesion and Adhesives Madrid
2019/01/01 - 2019/09/30 XX Congresso Internacional de Adhesion y Adhesivos
2018/02/18 - 2018/10/01 XIX Congress of Adhesion and Adhesives Madrid

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2019/01/27 - Current Benefits and Limitation of Adhesive Bonding Technology (Curso de Especialização Tecnológica)
2016/07/01 - Current Surface Treatments Técnico Europeu de Adesão (Curso de Especialização Tecnológica)
2021/06 - 2031/06 Aula de Juntas adesivas estruturais no Mestrado em Design Industrial e de Produto CSC (Mestrado integrado) Universidade do Porto Faculdade de Belas Artes, Portugal
2020/05/14 - 2020/05/14 Ligações Adesivas Conceção de Soluções Construtivas (Mestrado) Universidade do Porto Faculdade de Belas Artes, Portugal
2019/12/11 - 2019/12/11 Ligações Adesivas Técnologias de Ligação (Mestrado integrado) Faculdade de Engenharia da Universidade do Porto, Portugal

Journal scientific committee

Journal title (ISSN) Publisher
2019/12/17 - Current Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering (2041-3009) SAGE Publications
2018/09/24 - Current Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2041-3076) SAGE Publications
2017/10/01 - Current Microscopy and Microanalysis (1435-8115) Cambridge University Press
2017/08/30 - Current Applied Adhesion Science (2196-4351) SpringerOne
2017/07/31 - Current International Journal of Adhesion and Adhesives (0143-7496) Elsevier
2017/07/18 - Current European Journal of Environmental and Civil engineering (2116-7214) Informa UK (Taylor & Francis)
2017/04/06 - Current African Journal of Pure and Applied Chemistry (1996-0840) Academic journals
2017/04/01 - Current Journal of Chemical Engineering and Materials Science (2141-6605) Academic Journals
2017/03/01 - Current Scientific Research and Essays (1992-2248) Academic Journals
2017/01/17 - Current Frattura ed Integrità Strutturale (1971-8993)
2016/10/12 - Current U.Porto Journal of Engineering (2183-6493) Faculdade de Engenharia da Universidade do Porto
2016/09/01 - Current International Journal of the Physical Sciences (1992-1950) Academic Journals
2019/09/16 - 2019/09/30 Journal of Materials Research and Technology (2238-7854) Elsevier
2019/01/31 - 2019/02/21 Progress in Organic Coatings (0300-9440) Science direct

Other jury / evaluation

Activity description Institution / Organization
2020/10/01 - 2020/10/30 Elaboration on International Mention report on the PhD thesis of Maria Alvarés intitled "Recubrimientos orgánicos en polvo funcionalizados con nanosílice" Universidad Carlos III de Madrid - Campus de Leganés, Spain
Distinctions

Award

2023 INNOVATIVE TEACHING PRACTICE AWARD
Universidade do Porto, Portugal

Other distinction

2011 Best oral presentation with the work "Influence of the size and amount of cork particles on the toughness of a structural adhesive"