???global.info.a_carregar???
Identification

Personal identification

Full name
António Torres Marques

Citation names

  • Marques, António
  • A. T. Marques
  • A. Torres Marques
  • António Torres Marques

Author identifiers

Ciência ID
DC12-D290-FCFA
ORCID iD
0000-0001-9388-2724
Education
Degree Classification
1977/10 - 1981/06
Concluded
 PhD (Doktor (PhD))
Cranfield University, United Kingdom
"Creep behaviour of glass fibre reinforced polyester laminates in air and liquid environments" (THESIS/DISSERTATION)
1976/10 - 1977/09
Concluded
 Materials (Master)
Major in Polymers
Cranfield University, United Kingdom
"Effect of aggressive environments in the mechanical properties of GRP pipes and observation of crack propagation under high - stress conditions in GRP pipes - Determination of stress/strain relationship to GRP pipe" (THESIS/DISSERTATION)
1967/10 - 1972/07
Concluded
 Mechanical Engineering (Licenciatura)
Major in Mechanical Construction
Universidade do Porto Departamento de Engenharia Mecânica, Portugal
 15
Affiliation

Science

Category
Host institution 		Employer
2021/03 - Current Science and Technology Management Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2002/12/26 - 2021/09/12 Full Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
1994/03/05 - 2002/12/26 Associate Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
1989/12/29 - 1994/03/05 Associate Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
1983/01/03 - 1989/12/29 Assistant Professor (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
1975/06/03 - 1983/01/03 Assistant (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
1972/11/21 - 1975/06/03 Trainee Assistant (University Teacher) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal

Positions / Appointments

Category
Host institution 		Employer
2004 - 2005 Manager of Laboratory, Institute, Museum, Centre or Observatory Institute of Industrial Engineering and Industrial Management - INEGI: Porto, PT, Portugal
Institute of Industrial Engineering and Industrial Management - INEGI: Porto, PT, Portugal
1997/04/01 - 2000/04/07 Manager of Laboratory, Institute, Museum, Centre or Observatory Institute of Industrial Engineering and Industrial Management - INEGI: Porto, PT, Portugal
1991/03 - 1997/03 Manager of Laboratory, Institute, Museum, Centre or Observatory Institute of Industrial Engineering and Industrial Management - INEGI: Porto, PT, Portugal

Others

Category
Host institution 		Employer
2021/03/22 - Current Professor Emérito Universidade do Porto Faculdade de Engenharia, Portugal
Projects

Contract

Designation Funders
2018/07 - Current POCI-01-0145-FEDER-031041, A sustainable and nearly waste-zero technology for recycling waste printed circuit boards
POCI-01-0145-FEDER-031041
 Fundação para a Ciência e a Tecnologia
2020/01/01 - 2023/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UIDB/50022/2020
10.54499/UIDB/50022/2020
Researcher
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/05/07 - 2022/10/31 • OPTIMACS - European industrial doctorate for efficient multidisciplinary design Optimization of Multifunctional Aerospace Composite Structures
MSCA-ITN-2017
Researcher
2018/07/25 - 2022/06/30 Uma tecnologia sustentável e praticamente não geradora de resíduos para reciclagem de placas de circuito impresso
PTDC/EAM-MIN/31041/2017
Universidade do Porto, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2016/09/01 - 2021/02/28 Processos híbridos baseados em Fabrico Aditivo de compósitos de matriz termoplástica reforçados com fibras longas ou contínuas
SAICTPAC/0036/2015
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Universidade NOVA de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho, Portugal

Associação para a Inovação e Desenvolvimento da FCT, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/09 - 2021/02 FIBR3D - Hybrid processes based on Additive Manufacture of thermoplastic matrix composites reinforced with long or continuous fibers
POCI-01-0145-FEDER-016414
 Fundação para a Ciência e a Tecnologia
2016/01/01 - 2019/12/31 Introdução de tecnonogias baseadas em materiais avançados nas indústrias da mobilidade.
MITP-TB/PFM/0005/2013
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/01/01 - 2019/12/31 SciTech - Science and Technology for Competitive and Sustainable Industries
NORTE-01-0145-FEDER-000022
Researcher
INEGI – Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal
Concluded
2011/04/01 - 2014/10/31 ModTOP - Modelação Numérica do Processo de Tow Placement
PTDC/EME-TME/115472/2009
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/04/01 - 2013/09/30 Sistemas de Protecção ao Fogo para Perfis Pultrudidos de GFRP - FIRE-FRP
PTDC/ECM/100779/2008
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2009/04/01 - 2013/03/31 ANÁLISE E DESENVOLVIMENTO DE SISTEMAS INTEGRADOS PARA VEÍCULOS ELÉCTRICOS
MIT-Pt/EDAM-SMS/0030/2008
MIT-Pt/EDAM-SI/0025/2008
Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal

Universidade do Minho, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/04/01 - 2012/09/30 SensEFil - Monitorização de Reservatórios Produzidos por Enrolamento Filamentar Usando Sensores Ópticos Embebidos no Reforço em Compósito
PTDC/EME-PME/102806/2008
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2009/04/01 - 2012/03/31 Compositos Multiestaveis para Aplicação em Estruturas Aeronauticas Morfologicas
PTDC/EME-PME/64819/2006
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2009/10/01 - 2011/12/31 “Implantes inteligentes utilizando bionanocompósitos-SIMBIO”
NANO/NMed-SD/0156/2007
Universidade do Minho Centro de Física, Portugal

Universidade do Minho, Portugal

Universidade do Porto Faculdade de Medicina, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Universidade de Aveiro, Portugal

Universidade de Évora, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Ciências, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2006/09/01 - 2011/08/31 FEUP Activities Plan under the Engineering Design and Advanced Manufacturing Focus Area of the MIT-Portugal Program
MIT-Pt/EDAM/0006/2006
Universidade do Porto Faculdade de Engenharia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2007/05/02 - 2010/10/31 HIP FEMORAL PROSTHESIS FOR IN VIVO LOOSENING DATA ACQUISITION
PTDC/EME-PME/70824/2006
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Universidade de Évora, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/06/01 - 2010/09/30 Avaliação experimental dos efeitos da humidade no envelhecimento ena durabilidade de polímeros termoendurecíveis
PTDC/EME-PME/67791/2006
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/06/01 - 2010/09/30 Desenvolvimento de reforços para tecidos ligamentosos em material compósito biodegradável
PTDC/EME-PME/70155/2006
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Universidade do Porto Faculdade de Medicina, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/08/13 - 2010/08/12 Furação de estruturas em compósitos de matriz polimérica
PTDC/EME-TME/66207/2006
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/06/01 - 2010/03/31 Modelação Numérica do Processo de Enrolamento Filamentar usando o Método dos Elementos Finitos
PTDC/EME-PME/73528/2006
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2007/06/30 Influencia dos parâmetros de fabrico no desempenho dos sensores ópticos embebidos em materiais compósitos
POCI/EME/62147/2004
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2003 - 2005 ACÚSTICA-Detection of Acoustic Emission in Composite Materials using embedded fibre optics sensors
POCTI/EME/48574/2002
 Fundação para a Ciência e a Tecnologia
2002 - 2004 Health monitoring of composite structures under dynamic loads
SAPIENS / 42032 / EME / 2001
 Fundação para a Ciência e a Tecnologia
2001 - 2004 Behaviour and design of FRP reinforced concree structures considering ageing effects
PCTI/1999/ECM/36059
 Fundação para a Ciência e a Tecnologia
1998 - 2001 PRAXIS XXI /P/EME/12304/1998 - “Monitoring and control of RTM process using optical fibres”
PRAXIS XXI /P/EME/12304/1998
 Fundação para a Ciência e a Tecnologia
1993 - 1995 Motorway separators in composite materials
STRD/CTM/0063
 Fundação para a Ciência e a Tecnologia
1993 - 1993 Development of composite materials
0058/C/91
 Fundação para a Ciência e a Tecnologia
1988 - 1990 Study of the behaviour of structural adhesives
87317MATR
 Fundação para a Ciência e a Tecnologia
1988 - 1990 Rationalization of the manufacturing technologies and optimization of mechanical properties polymeric matrix composites
87535/MATR
 Fundação para a Ciência e a Tecnologia
Outputs

Publications

Book chapter
  1. Gairo Garreto; J. Santos Baptista; Antônia Mota; A. Torres Marques. "Hand Tools Characteristics in Slave and Modern Slave Labour". 2020.
    10.1007/978-3-030-41486-3_74
  2. Gairo Garreto; João S. Baptista; Antônia Mota; A. Torres Marques. "Occupational Hygiene in Slave Work as a Potential Indicator for Typifying the Neo-Slavery". 181-189. Springer International Publishing, 2019.
    10.1007/978-3-030-14730-3_20
  3. J. Duarte; João S. Baptista; A. Torres Marques. "Occupational Accidents in the Mining Industry—A Short Review". 61-69. Springer International Publishing, 2019.
    10.1007/978-3-030-14730-3_7
  4. R. P. Martins; J. Duarte; A. Torres Marques. "How to Prevent the Risk of Slipping in Kitchens?—A Short Review". 89-96. Springer International Publishing, 2019.
    10.1007/978-3-030-14730-3_10
Conference paper
  1. António Torres Marques; M Inês Barros; M João Rodrigues; G Melo; Crainic, N.; Vékás, L.; Raquel Santos; Nuno Correia; NC Popa. Corresponding author: António Torres Marques. "Challenges to nanomagnetic composite systems". Paper presented in NanoBioMat 2023, Bucareste, 2023.
  2. Ana C. Madeira; António Torres Marques; Carla Gomes; Carlos Alves; Carlos A. V. Costa; Joana Maia Dias; João Costa; et al. Corresponding author: Ana C. Madeira. "O CONCURSO MAIS IS - UM AGENTE DE MUDANÇA NA IMPLEMENTAÇÃO DE UMA CULTURA DE SUSTENTABILIDADE NA FEUP". Paper presented in CCS2023 5ª Conferência Campus Sustentável, Viana do CAstelo, 2023.
  3. António Torres Marques; Carlos M Fernandes; Alexandre B Santos; Ana Rita Silva; Esfandiari, Puria; Parente, Marco; João Francisco MG da Silva; Alexandre Afonso; Tomás Schuller. Corresponding author: António Torres Marques. "4D-Printing with Shape-Memory Composite Filaments". Paper presented in ICSAAM 2023 - 10th International Conference on “Structural Analysis of Advanced Materials”, Zakynthos, 2023.
  4. Carlos M Silva; António Torres Marques; Vasco Alves; Arteiro, Albertino; Paulo Nóvoa; Miguel Figueiredo. Corresponding author: António Torres Marques. "Durable Composites Inspired by nature". Paper presented in ICSAAM 2023 - 10th International Conference on ¿Structural Analysis of Advanced Materials¿, Zakynthos, 2023.
  5. Marques, António; Paulo Nóvoa. Corresponding author: Marques, António. "Fittness of glass fiber reinforced cellulose acetate behaviour to classic viscoelasticity models". Paper presented in ICCS26 - 26th International Conference on Composite Structures & MECHCOMP8 - 8th International Conference on Mechanics of Composites, Porto, 2023.
  6. António Torres Marques; Marco Parente; Alexandre B Santos. Corresponding author: António Torres Marques. "Finite element analysis of shape memory polymers – application to emergency shelters". Paper presented in ICCS26 - 26th International Conference on Composite Structures & MECHCOMP8 - 8th International Conference on Mechanics of Composites, Porto, 2023.
    Published
  7. António Torres Marques; Diana Reboledo Grau; Oscar Gonzalez; Belmira Neto. Corresponding author: António Torres Marques. "Analysis of fiber-reinforced thermoplastic composite/metal sheets for the automative sector". Paper presented in MATCOMP2023 XV Congreso Nacional de Materiales Compuestos, Gijon, 2023.
  8. António Torres Marques; CAV Costa; da Silva, Lucas F. M.; Jorge Lino Alves. Corresponding author: António Torres Marques. "Materials and Sustainability". Paper presented in MATERIAIS2023 XXI Congresso da Sociedade Portuguesa de Materiais and XII International Symposium on Materials, Guimarães, 2023.
  9. António Torres Marques; Susana PB Sousa; António J Baptista. Corresponding author: António Torres Marques. "Material design-for-excellence (or m-dfx) – A new holistic analysis for bio-composite materials". Paper presented in MATERIAIS2023 XXI Congresso da Sociedade Portuguesa de Materiais and XII International Symposium on Materials, Guimarães, 2023.
  10. Marques, António; Paulo Nóvoa. Corresponding author: Marques, António. "Modelling the dynamic viscoelastic behaviour of composite systems with frequency and temperature variables". Paper presented in DMRS2023 – 1ST INTERNATIONAL CONFERENCE ON DURABILITY, REPAIR AND MAINTENANCE OF STRUCTURES 2023, Porto, 2023.
  11. Marques, António; Arteiro, Albertino; Carlos M Silva. Corresponding author: Marques, António. "Enhancing durability of composite systems". Paper presented in DMRS2023 – 1ST INTERNATIONAL CONFERENCE ON DURABILITY, REPAIR AND MAINTENANCE OF STRUCTURES 2023, Porto, 2023.
  12. Márcia Silva; Raimundo Silva; Paulo Nóvoa; Helena M. V. M. Soares; Margarida M. S. M. Bastos; António Marques. "Development and Characterization of Bulk and Epoxy Molding Compounds from Non-Metallic Fractions Recovered from Printed Circuit Boards". 2022.
    10.3390/materproc2022008073
  13. Márcia Silva; Raimundo Silva; Paulo Nóvoa; Helena M. V. M. Soares; Margarida M. S. M. Bastos; António Marques. "Development and Characterization of Composite Mortar from Non-Metallic Fractions Recovered from Printed Circuit Boards under Thermal Fatigue". 2022.
    10.3390/materproc2022008064
Journal article
  1. A. Torres Marques; D. E. Reboledo Grau; Oscar Gonzalez; Neto, B.. Corresponding author: A. Torres Marques. "Analysis of fiber-reinforced thermoplastic composite/metal sheets for the automative sector". Revista de Materiales Compuestos (2023):
    Published
  2. L Alice Costa; Bárbara Rangel Carvalho; Jorge Lino Alves; António T Marques; André Filipe BM da Silva; Puria Esfandiari; João Francisco MG da Silva; Ana Rita Silva; Marco Parente. "4D structures for the short-time building of emergency shelters". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022): https://doi.org/10.1177/14644207221086496.
    10.1177/14644207221086496
  3. Natacha Rosa; Marcelo F. S. F. Moura; Susana Olhero; Ricardo Simoes; Fernão D. Magalhães; António Torres Marques; João P. S. Ferreira; et al. "Bone: An Outstanding Composite Material". Applied Sciences 12 7 (2022): 3381-3381. https://doi.org/10.3390/app12073381.
    10.3390/app12073381
  4. "Towards an effective sensing technology to monitor micro-scale interface loosening of bioelectronic implants". Scientific Reports 11 1 (2021): http://dx.doi.org/10.1038/s41598-021-82589-3.
    10.1038/s41598-021-82589-3
  5. Filipe Ferreira; Pedro Fernandes; Nuno Correia; António Torres Marques. "Development of a Pultrusion Die for the Production of Thermoplastic Composite Filaments to Be Used in Additive Manufacture". Journal of Composites Science (2021): https://doi.org/10.3390/jcs5050120.
    10.3390/jcs5050120
  6. J. Duarte; A. Torres Marques; J. Santos Baptista. "Occupational Accidents Related to Heavy Machinery: A Systematic Review". Safety (2021): https://doi.org/10.3390/safety7010021.
    10.3390/safety7010021
  7. Pedro Duarte Menezes; Tomás De Meireles Carneiro; António Torres Marques. "Composites for Life". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.002_0006.
    10.24840/2183-6493_007.002_0006
  8. Susana P.B. Sousa; Tânia Peixoto; Raquel M. Santos; Ascensão Lopes; Maria da Conceição Paiva; António T. Marques. "Health and Safety Concerns Related to CNT and Graphene Products, and Related Composites". Journal of Composites Science 4 3 (2020): 106-106. https://doi.org/10.3390/jcs4030106.
    10.3390/jcs4030106
  9. J. Duarte; J. Santos Baptista; A. Torres Marques. "Evidence of occupational accidents with equipment in mining – a systematic review protocol". International Journal of Occupational and Environmental Safety 2 2 (2018): 84-88. https://doi.org/10.24840/2184-0954_002.002_0009.
    10.24840/2184-0954_002.002_0009
  10. Sara Maheronnaghsh; Joana Santos; António Torres Marques; Mário Vaz. "Methods for Measuring Association between Intervention for Increasing Movement and Productivity". U.Porto Journal of Engineering (2018): https://doi.org/10.24840/2183-6493_004.001_0003.
    10.24840/2183-6493_004.001_0003
  11. L.R. de Souza; A.T. Marques; J.R.M. d'Almeida. "Effects of aging on water and lubricating oil on the creep behavior of a GFRP matrix composite". Composite Structures 168 (2017): 285-291. https://doi.org/10.1016%2Fj.compstruct.2017.02.041.
    10.1016/j.compstruct.2017.02.041
  12. "Load sharing ability of the liner in type III composite pressure vessels under internal pressure". Journal of Reinforced Plastics and Composites (2014): http://dx.doi.org/10.1177/0731684414560221.
    10.1177/0731684414560221
  13. Pereira, G.; Frias, C.; Faria, H.; Frazão, O.; Marques, A.T.. "Study of strain-transfer of FBG sensors embedded in unidirectional composites". Polymer Testing 32 6 (2013): 1006-1010. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879803975&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2013.05.006
  14. Faria, H.; Pires, F.A.; Marques, A.T.. "Modeling the rheology of SR1500 and LY556 epoxies under manufacturer's recommended cure cycles after viscosimetry and rheometry characterization". Polymer Engineering and Science (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84879267648&partnerID=MN8TOARS.
    10.1002/pen.23607
  15. Fernández, M.V.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Marques, A.T.. "Characterization of composite bonded joints under pure mode II fatigue loading". Composite Structures 95 (2013): 222-226. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868152902&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.07.031
  16. Pereira, G.; Frias, C.; Faria, H.; Frazão, O.; Marques, A.T.. "On the improvement of strain measurements with FBG sensors embedded in unidirectional composites". Polymer Testing 32 1 (2013): 99-105. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868566666&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2012.09.010
  17. Vieira, A.C.; Medeiros, R.; Guedes, R.M.; Marques, A.T.; Tita, V.. "Visco-elastic-plastic properties of suture fibers made of PLA-PCL". Materials Science Forum 730-732 (2013): 56-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870752994&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.56
  18. Fernández, M.V.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Marques, A.T.. "Mixed-mode i + II fatigue/fracture characterization of composite bonded joints using the Single-Leg Bending test". Composites Part A: Applied Science and Manufacturing 44 1 (2013): 63-69. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866984654&partnerID=MN8TOARS.
    10.1016/j.compositesa.2012.08.009
  19. Catalanotti, G.; Camanho, P.P.; Marques, A.T.. "Three-dimensional failure criteria for fiber-reinforced laminates". Composite Structures 95 (2013): 63-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868098268&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.07.016
  20. Ponmozhi, J.; Frias, C.; Marques, T.; Frazão, O.. "Smart sensors/actuators for biomedical applications: Review". Measurement: Journal of the International Measurement Confederation 45 7 (2012): 1675-1688. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861795027&partnerID=MN8TOARS.
    10.1016/j.measurement.2012.02.006
  21. Durão, L.M.P.; Gonçalves, D.J.S.; Tavares, J.M.R.S.; De Albuquerque, V.H.C.; Marques, A.T.. "Comparative analysis of drills for composite laminates". Journal of Composite Materials 46 14 (2012): 1649-1659. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863702225&partnerID=MN8TOARS.
    10.1177/0021998311421690
  22. Reis, J.; Frias, C.; Canto E Castro, C.; Botelho, M.L.; Marques, A.T.; Simões, J.A.O.; Capela E Silva, F.; Potes, J.. "A new piezoelectric actuator induces bone formation in vivo: A preliminary study". Journal of Biomedicine and Biotechnology 2012 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84862271550&partnerID=MN8TOARS.
    10.1155/2012/613403
  23. Catalanotti, G.; Camanho, P.P.; Ghys, P.; Marques, A.T.. "Fastener pull-through failure in GFRP laminates". ICCM International Conferences on Composite Materials (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-84875964837&partnerID=MN8TOARS.
  24. Voinescu, M.; Soares, D.P.; Castro, M.P.; Marques, A.T.; Natal Jorge, R.M.. "The use of muscle recruitment algorithms to better assess problems for children with gait deficiency". Technology and Medical Sciences, TMSi 2010 - Proceedings of the 6th International Conference on Technology and Medical Sciences (2011): 285-287. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856718265&partnerID=MN8TOARS.
  25. Catalanotti, G.; Camanho, P.P.; Ghys, P.; Marques, A.T.. "An efficient design method for multi-material bolted joints used in the railway industry". Composite Structures 94 1 (2011): 246-252. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053053510&partnerID=MN8TOARS.
    10.1016/j.compstruct.2011.06.018
  26. Catalanotti, G.; Camanho, P.P.; Ghys, P.; Marques, A.T.. "Experimental and numerical study of fastener pull-through failure in GFRP laminates". Composite Structures 94 1 (2011): 239-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053051145&partnerID=MN8TOARS.
    10.1016/j.compstruct.2011.06.021
  27. Vieira, A.C.; Marques, A.T.; Guedes, R.M.; Tita, V.. "Material model proposal for biodegradable materials". Procedia Engineering 10 (2011): 1597-1602. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052926811&partnerID=MN8TOARS.
    10.1016/j.proeng.2011.04.267
  28. Ramos, C.A.; De Oliveira, R.; Marques, A.T.; Frazao, O.. "Design and experimental evaluation of a composite strain rosette using fiber Bragg grating". Microwave and Optical Technology Letters 53 8 (2011): 1853-1857. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960689452&partnerID=MN8TOARS.
    10.1002/mop.26098
  29. Fernández, M.V.; De Moura, M.F.S.F.; Da Silva, L.F.M.; Marques, A.T.. "Composite bonded joints under mode i fatigue loading". International Journal of Adhesion and Adhesives 31 5 (2011): 280-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956156079&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.10.003
  30. Ramos, C.A.; De Oliveira, R.; Marques, A.T.; Frazão, O.. "Measurement of dynamic strain using an optic fibre system in adaptive composite laminates with an integrated piezoelectric sensor/actuator". Optica Applicata 41 1 (2011): 79-88. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956075479&partnerID=MN8TOARS.
  31. Vieira, A.C.; Vieira, J.C.; Ferra, J.M.; Magalhães, F.D.; Guedes, R.M.; Marques, A.T.. "Mechanical study of PLA-PCL fibers during in vitro degradation". Journal of the Mechanical Behavior of Biomedical Materials 4 3 (2011): 451-460. http://www.scopus.com/inward/record.url?eid=2-s2.0-79751525788&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2010.12.006
  32. Durão, L.M.P.; Tavares, J.M.R.S.; De Albuquerque, V.H.C.; Marques, A.T.; Magalhães, A.G.; Vieira, A.A.. "Tool effects on hybrid laminates drilling". Materials and Manufacturing Processes 25 6 (2010): 476-481. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953636513&partnerID=MN8TOARS.
    10.1080/10426910903229354
  33. Ramantani, D.A.; Campilho, R.D.S.G.; de Moura, M.F.S.F.; Marques, A.T.. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". Journal of Sandwich Structures and Materials 12 3 (2010): 369-390. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952144546&partnerID=MN8TOARS.
    10.1177/1099636209104520
  34. Frias, C.; Reis, J.; Capela e Silva, F.; Potes, J.; Simões, J.; Marques, A.T.. "Polymeric piezoelectric actuator substrate for osteoblast mechanical stimulation". Journal of Biomechanics 43 6 (2010): 1061-1066. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950692226&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2009.12.010
  35. Gonçalves, D.J.S.; Durão, L.M.P.; Tavares, J.M.R.S.; Albuquerque, V.H.C.; Marques, A.T.. "Evaluation of tools and cutting conditions on carbon fibre reinforced laminates". Materials Science Forum 638-642 (2010): 944-949. http://www.scopus.com/inward/record.url?eid=2-s2.0-75849137162&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.638-642.944
  36. Durão, L.M.P.; Gonçalves, D.J.S.; Tavares, J.M.R.S.; Albuquerque, V.H.C.; Marques, A.T.; Baptista, A.M.. "Drilling of carbon fibre reinforced laminates - A comparative analysis of five different drills on thrust force, roughness and delamination". Materials Science Forum 636-637 (2010): 206-213. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649092986&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.206
  37. Vieira, A.C.; Vieira, J.C.; Guedes, R.M.; Marques, A.T.. "Degradation and viscoelastic properties of PLA-PCL, PGA-PCL, PDO and PGA fibres". Materials Science Forum 636-637 (2010): 825-832. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649119690&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.825
  38. Torres, L.M.; Silva, J.F.; Marques, A.T.; Nunes, J.P.; Marques, R.P.. "Glass/polyvinyl chloride composites". Materials Science Forum 636-637 (2010): 214-219. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649145884&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.214
  39. Velosa, J.C.; Nunes, J.P.; Silva, J.F.; Bernardo, C.A.; Marques, A.T.. "Production of thermoplastic towpregs". Materials Science Forum 636-637 (2010): 220-225. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649148545&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.220
  40. Ribeiro, M.C.S.; Juvandes, L.F.P.; Rodrigues, J.D.; Ferreira, A.J.M.; Marques, A.T.. "Behaviour of cement and polymer mortar materials to rapid freeze-thaw cycling". Materials Science Forum 636-637 (2010): 1329-1335. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649110808&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.1329
  41. Ribeiro, M.C.S.; Vogt, J.C.; Marques, A.T.; Ferreira, A.J.M.. "Mechanical behaviour analysis of polymer mortars reinforced with jute and piassava natural fibres under alkaline environments". Materials Science Forum 636-637 (2010): 239-244. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649091494&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.239
  42. Faria, H.; Frias, C.; Frazão, O.; Vieira, P.; Marques, A.T.. "Development and validation of online monitoring techniques for composite overwrapped pressure vessels". American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6 (2010): 263-268. http://www.scopus.com/inward/record.url?eid=2-s2.0-80155147665&partnerID=MN8TOARS.
    10.1115/PVP2010-25812
  43. Catalanotti, G.; Camanho, P.P.; Xavier, J.; Dávila, C.G.; Marques, A.T.. "Measurement of resistance curves in the longitudinal failure of composites using digital image correlation". Composites Science and Technology 70 13 (2010): 1986-1993. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956930796&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.07.022
  44. Frias, C.; Reis, J.; Capela e Silva, F.; Potes, J.; Simões, J.; Marques, A.T.. "Piezoelectric actuator: Searching inspiration in nature for osteoblast stimulation". Composites Science and Technology 70 13 (2010): 1920-1925. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956914513&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.06.011
  45. Ramantani, D.A.; de Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Fracture characterization of sandwich structures interfaces under mode I loading". Composites Science and Technology 70 9 (2010): 1386-1394. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953705429&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.04.018
  46. Frias, C.; Faria, H.; Frazão, O.; Vieira, P.; Marques, A.T.. "Manufacturing and testing composite overwrapped pressure vessels with embedded sensors". Materials and Design 31 8 (2010): 4016-4022. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953286153&partnerID=MN8TOARS.
    10.1016/j.matdes.2010.03.022
  47. Crainic, N.; Bica, D.; Popa, N.C.; Vékás, L.; Marques, T.; Nóvoa, P.J.; Correia, N.; De Sá, C.P.M.. "Magnetic nanocomposite materials obtained using magnetic nano fluids and resins". International Journal of Nanomanufacturing 6 1-4 (2010): 350-361. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956034937&partnerID=MN8TOARS.
    10.1504/IJNM.2010.034796
  48. Silva, J.F.; Nunes, J.P.; Velosa, J.C.; Bernardo, C.A.; Marques, A.T.. "Thermoplastic matrix towpreg production". Advances in Polymer Technology 29 2 (2010): 80-85. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955651615&partnerID=MN8TOARS.
    10.1002/adv.20174
  49. Durão, L.M.P.; Gonçalves, D.J.S.; Tavares, J.M.R.S.; de Albuquerque, V.H.C.; Aguiar Vieira, A.; Torres Marques, A.. "Drilling tool geometry evaluation for reinforced composite laminates". Composite Structures 92 7 (2010): 1545-1550. http://www.scopus.com/inward/record.url?eid=2-s2.0-76349085404&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.10.035
  50. Ribeiro, M.C.S.; Ferreira, A.J.M.; Marques, A.T.. "Effect of natural and artificial weathering on the long-term flexural performance of polymer mortars". Mechanics of Composite Materials 45 5 (2009): 515-526. http://www.scopus.com/inward/record.url?eid=2-s2.0-75149123376&partnerID=MN8TOARS.
    10.1007/s11029-009-9104-7
  51. Ramos, C.A.; de Oliveira, R.; Marques, A.T.. "Design of an optical fibre sensor patch for longitudinal strain measurement in structures". Materials and Design 30 7 (2009): 2323-2331. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349131263&partnerID=MN8TOARS.
    10.1016/j.matdes.2008.11.008
  52. Velosa, J.C.; Nunes, J.P.; Antunes, P.J.; Silva, J.F.; Marques, A.T.. "Development of a new generation of filament wound composite pressure cylinders". Composites Science and Technology 69 9 (2009): 1348-1353. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349169142&partnerID=MN8TOARS.
    10.1016/j.compscitech.2008.09.018
  53. Pereira, C.M.C.; Herrero, M.; Labajos, F.M.; Marques, A.T.; Rives, V.. "Preparation and properties of new flame retardant unsaturated polyester nanocomposites based on layered double hydroxides". Polymer Degradation and Stability 94 6 (2009): 939-946. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349207091&partnerID=MN8TOARS.
    10.1016/j.polymdegradstab.2009.03.009
  54. Frias, C.; Frazão, O.; Tavares, S.; Vieira, A.; Marques, A.T.; Simões, J.. "Mechanical characterization of bone cement using fiber Bragg grating sensors". Materials and Design 30 5 (2009): 1841-1844. http://www.scopus.com/inward/record.url?eid=2-s2.0-60249092813&partnerID=MN8TOARS.
    10.1016/j.matdes.2008.07.035
  55. Vieira, A.; de Oliveira, R.; Frazão, O.; Baptista, J.M.; Marques, A.T.. "Effect of the recoating and the length on fiber Bragg grating sensors embedded in polymer composites". Materials and Design 30 5 (2009): 1818-1821. http://www.scopus.com/inward/record.url?eid=2-s2.0-60249102270&partnerID=MN8TOARS.
    10.1016/j.matdes.2008.08.005
  56. Nunes, J.P.; Silva, J.F.; Velosa, J.C.; Bernardo, C.A.; Marques, A.T.. "New thermoplastic matrix composites for demanding applications". Plastics, Rubber and Composites 38 2-4 (2009): 167-172. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649223764&partnerID=MN8TOARS.
    10.1179/174328909X387946
  57. Ionita, D.; Tihan, G.; Marques, A.T.. "Water absorption and mechanical properties of cements based on poly (methyl methacrylate) (PMMA) as function of hydroxyapatite (HA) content". Key Engineering Materials 396-398 (2009): 493-496. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849131616&partnerID=MN8TOARS.
    10.4028/0-87849-353-0.493
  58. Frias, C.; Reis, J.; Silva, F.; Potes, J.; Simões, J.; Marques, A.T.. "Experimental and numerical simulation of mechanical actuators coated with PMMA and bonelike micro particles". ICCM International Conferences on Composite Materials (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052073086&partnerID=MN8TOARS.
  59. Faria, H.; Zmijewska Rocha, A.E.; Miranda, H.D.; Pires, F.M.A.; Marques, A.T.. "Numerical modelling of the filament winding process". ICCM International Conferences on Composite Materials (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052070476&partnerID=MN8TOARS.
  60. Nunes, J.P.; Silva, J.F.; Ferreira, J.C.; Marques, A.T.. "New composite poles for electrical lighting, transport and distribution". ICCM International Conferences on Composite Materials (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052055792&partnerID=MN8TOARS.
  61. Silva, J.F.; Nunes, J.P.; Velosa, J.C.; Bernardo, C.A.; Marques, A.T.. "Thermoplastic matrix towpreg production". ICCM International Conferences on Composite Materials (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052051606&partnerID=MN8TOARS.
  62. Vieira, A.C.; Guedes, R.M.; Marques, A.T.. "Development of ligament tissue biodegradable devices: A review". Journal of Biomechanics 42 15 (2009): 2421-2430. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350431196&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2009.07.019
  63. Marques, A.T.; Durão, L.M.; Magalhães, A.G.; Silva, J.F.; Tavares, J.M.R.S.. "Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill". Composites Science and Technology 69 14 (2009): 2376-2382. http://www.scopus.com/inward/record.url?eid=2-s2.0-70349485875&partnerID=MN8TOARS.
    10.1016/j.compscitech.2009.01.025
  64. Marques, M.A.; Monteiro, J.; Ramos, C.A.; Vaz, M.A.; Marques, A.T.. "Actuator capabilities of piezoelectric devices embedded in composite laminate". Materials Science Forum 587-588 (2008): 237-240. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349089072&partnerID=MN8TOARS.
  65. Vieira, A.C.; Vieira, J.C.; Guedes, R.M.; Marques, A.T.. "Degradation characterization of aliphatic polyesters - In vitro study". AIP Conference Proceedings 1042 (2008): 309-311. http://www.scopus.com/inward/record.url?eid=2-s2.0-52249089429&partnerID=MN8TOARS.
    10.1063/1.2989044
  66. Durão, L.M.P.; de Moura, M.F.S.F.; Marques, A.T.. "Numerical prediction of delamination onset in carbon/epoxy composites drilling". Engineering Fracture Mechanics 75 9 (2008): 2767-2778. http://www.scopus.com/inward/record.url?eid=2-s2.0-40649106914&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2007.03.009
  67. Silva, J.F.; Nunes, J.P.; Vieira, P.; Marques, A.T.. "GF/PP towpregs production, testing and processing". International Journal of Mechanics and Materials in Design 4 2 (2008): 205-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-43249116713&partnerID=MN8TOARS.
    10.1007/s10999-007-9050-2
  68. Durão, L.M.P.; Tavares, J.M.R.S.; De Magalhães, A.G.; Marques, A.T.; Baptista, A.P.M.. "Damage analysis of carbon/epoxy plates after drilling". International Journal of Materials and Product Technology 32 2-3 (2008): 226-242. http://www.scopus.com/inward/record.url?eid=2-s2.0-46449086806&partnerID=MN8TOARS.
    10.1504/IJMPT.2008.018983
  69. Marques, A.T.; de Morais, A.B.. "Forward to special issue". Engineering Fracture Mechanics 75 9 (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-40649121756&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2007.03.006
  70. Alpuim, P.; Filonovich, S.A.; Costa, C.M.; Rocha, P.F.; Vasilevskiy, M.I.; Lanceros-Mendez, S.; Frias, C.; et al. "Fabrication of a strain sensor for bone implant failure detection based on piezoresistive doped nanocrystalline silicon". Journal of Non-Crystalline Solids 354 19-25 (2008): 2585-2589. http://www.scopus.com/inward/record.url?eid=2-s2.0-42649090773&partnerID=MN8TOARS.
    10.1016/j.jnoncrysol.2007.09.094
  71. de Oliveira, R.; Ramos, C.A.; Marques, A.T.. "Health monitoring of composite structures by embedded FBG and interferometric Fabry-Pérot sensors". Computers and Structures 86 3-5 (2008): 340-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-38949130474&partnerID=MN8TOARS.
    10.1016/j.compstruc.2007.01.040
  72. de Oliveira, R.; Marques, A.T.. "Health monitoring of FRP using acoustic emission and artificial neural networks". Computers and Structures 86 3-5 (2008): 367-373. http://www.scopus.com/inward/record.url?eid=2-s2.0-38949209879&partnerID=MN8TOARS.
    10.1016/j.compstruc.2007.02.015
  73. Torres, L.; Nunes, J.P.; Silva, J.F.; Marques, A.T.. "New PVC matrix towpregs and composites". Materials Science Forum 587-588 (2008): 241-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349123458&partnerID=MN8TOARS.
  74. Silva, R.F.; Silva, J.F.; Nunes, J.P.; Bernardo, C.A.; Marques, A.T.. "New powder coating equipment to produce continuous fibre thermoplastic matrix towpregs". Materials Science Forum 587-588 (2008): 246-250. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349118878&partnerID=MN8TOARS.
  75. Marques, A.T.; Silva, A.F.; Baptista, A.P.M.; Sá, C.; Alves, F.J.L.; Malheiros, L.F.; Vieira, M.. "Materials Science Forum: Foreword". Materials Science Forum 587-588 (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-60349110022&partnerID=MN8TOARS.
  76. Ramos, C.A.; De Oliveira, R.; Marques, A.T.. "Implementation and testing of smart composite laminates with embedded piezoelectric sensors/actuators". Materials Science Forum 587-588 (2008): 645-649. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349107031&partnerID=MN8TOARS.
  77. Ribeiro, M.C.S.; Rodrigues, J.A.; Ferreira, A.J.M.; Marques, A.T.. "Fire behaviour enhancement of epoxy polymer mortars modified with flame retardant systems". Materials Science Forum 587-588 (2008): 903-907. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349114356&partnerID=MN8TOARS.
  78. Durão, L.M.P.; Magalhães, A.G.; Marques, A.T.; Baptista, A.M.; Figueiredo, M.. "Drilling of fibre reinforced plastic laminates". Materials Science Forum 587-588 (2008): 706-710. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349131732&partnerID=MN8TOARS.
  79. Pereira, C.M.C.; Nóvoa, P.; Marques, A.T.. "Dynamic mechanical thermal analysis of flame-retardant unsaturated polyester nanocomposites: The effect of Aluminum Hydroxide (ATH) and nanoclays". Materials Science Forum 587-588 (2008): 232-236. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349085904&partnerID=MN8TOARS.
  80. Pereira, C.M.C.; Marques, A.T.. "Kinetic studies of flame-retardant unsaturated polyester nanocomposites: The effect of aluminum hydroxide (ATH), ammonium polyphospahte (APP) and nanoclays". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960073212&partnerID=MN8TOARS.
  81. Silva, J.F.; Correia, S.; Monteiro, J.; Nunes, P.J.; Marques, A.T.. "Study of the filament wound composite pipes damage". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960062634&partnerID=MN8TOARS.
  82. Durão, L.M.; Magalhães, A.G.; Tavres, J.M.R.S.; Marques, A.T.. "Analyzing objects in images for estimating the delamination influence on load carrying capacity of composite laminates". Proceedings of the International Symposium CompIMAGE 2006 - Computational Modelling of Objects Represented in Images: Fundamentals, Methods and Applications (2007): 169-174. http://www.scopus.com/inward/record.url?eid=2-s2.0-60749123965&partnerID=MN8TOARS.
  83. Nunes, J.P.; Velosa, J.C.; Antunes, P.J.; Silva, J.F.; Marques, A.T.. "Studying the production of filament wound composite pressure vessels". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960067135&partnerID=MN8TOARS.
  84. Marques, A.T.; Durão, L.M.; Magalhães, A.G.; Tavares, J.M.. "Delamination analysis of carbon fibre reinforced laminates". ICCM International Conferences on Composite Materials (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-79960041860&partnerID=MN8TOARS.
  85. Silva, J.F.; Correia, S.M.; Monteiro, J.; Nunes, J.P.; Marques, A.T.. "Study of damage in filament wound thermoplastic matrix composite pipes". Annual Technical Conference - ANTEC, Conference Proceedings 3 (2007): 1823-1827. http://www.scopus.com/inward/record.url?eid=2-s2.0-34648823598&partnerID=MN8TOARS.
  86. De Oliveira, R.; Frazão, O.; Santos, J.L.; Marques, A.T.. "Development of an optic fibre sensor system for acoustic emission sensing in FRP". Materials Science Forum 514-516 PART 1 (2006): 794-798. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849044840&partnerID=MN8TOARS.
  87. De Oliveira, R.; Marques, A.T.. "Damage mechanisms identification in FRP using acoustic emission and artificial neural networks". Materials Science Forum 514-516 PART 1 (2006): 789-793. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849043325&partnerID=MN8TOARS.
  88. Ramos, C.A.; Frazão, O.; Dias, I.; Marques, A.T.. "The signal characteristics of the spectral response of bragg grating sensor embedded in composite laminated after the cure process". Materials Science Forum 514-516 PART 1 (2006): 629-632. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849034036&partnerID=MN8TOARS.
  89. Silva, J.F.; Nunes, J.P.; Marques, A.T.. "Consolidation of glass fibre-polypropylene towpregs by compression moulding". Materials Science Forum 514-516 PART 1 (2006): 677-681. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849013235&partnerID=MN8TOARS.
  90. Nóvoa, P.J.R.O.; Ferreira, A.J.M.; Marques, A.T.. "Mechanical performance of unsaturated polyester resins modified with powder from scrap tyre rubber". Materials Science Forum 514-516 PART 1 (2006): 662-665. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849045818&partnerID=MN8TOARS.
  91. Durão, L.M.P.; de Moura, M.F.S.F.; Marques, A.T.. "Numerical simulation of the drilling process on carbon/epoxy composite laminates". Composites Part A: Applied Science and Manufacturing 37 9 (2006): 1325-1333. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746731075&partnerID=MN8TOARS.
    10.1016/j.compositesa.2005.08.013
  92. Ramos, C.A.; Esteves, J.L.; Silva, R.A.; Marques, A.T.. "Analyses of composite structures behaviour with embedded bragg grating sensors". Materials Science Forum 514-516 PART 1 (2006): 614-618. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849050906&partnerID=MN8TOARS.
  93. Nunes, J.P.; Silva, J.F.; Marques, A.T.. "Using additives to improve the properties of composites made from towpregs". Annual Technical Conference - ANTEC, Conference Proceedings 4 (2005): 309-313. http://www.scopus.com/inward/record.url?eid=2-s2.0-33644933321&partnerID=MN8TOARS.
  94. Nunes, J.P.; Silva, J.F.; Marques, A.T.. "Consolidation of glass-fiber/polypropylene towpregs by compression molding". Annual Technical Conference - ANTEC, Conference Proceedings 4 (2005): 304-308. http://www.scopus.com/inward/record.url?eid=2-s2.0-33644940872&partnerID=MN8TOARS.
  95. Frazão, O.; Ramos, C.A.; Pinto, N.M.P.; Baptista, J.M.; Marques, A.T.. "Simultaneous measurement of pressure and temperature using single mode optical fibres embedded in a hybrid composite laminated". Composites Science and Technology 65 11-12 (2005): 1756-1760. http://www.scopus.com/inward/record.url?eid=2-s2.0-21644474574&partnerID=MN8TOARS.
    10.1016/j.compscitech.2005.03.002
  96. Simões, J.A.; Marques, A.T.. "Design of a composite hip femoral prosthesis". Materials and Design 26 5 (2005): 391-401. http://www.scopus.com/inward/record.url?eid=2-s2.0-15344345067&partnerID=MN8TOARS.
    10.1016/j.matdes.2004.07.024
  97. Camanho, P.P.; Tavares, C.M.L.; De Oliveira, R.; Marques, A.T.; Ferreira, A.J.M.. "Increasing the efficiency of composite single-shear lap joints using bonded inserts". Composites Part B: Engineering 36 5 (2005): 372-383. http://www.scopus.com/inward/record.url?eid=2-s2.0-17444401739&partnerID=MN8TOARS.
    10.1016/j.compositesb.2005.01.007
  98. Lima, A.M.V.; Marques, A.T.. "Fatigue simulation of GFR composites in 3-point bending tests". Science and Engineering of Composite Materials 12 1-2 (2005): 159-165. http://www.scopus.com/inward/record.url?eid=2-s2.0-19844383207&partnerID=MN8TOARS.
  99. Faria, H.; Vieira, A.; Reis, J.; Marques, A.T.; Guedes, R.M.; Ferreira, A.J.M.. "Long-term behaviour of GRP pipes". Science and Engineering of Composite Materials 12 1-2 (2005): 55-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-19844367060&partnerID=MN8TOARS.
  100. Landolt, J.H.; Magalhães, P.H.; Nóvoa, P.R.; Viana, J.; Marques, A.T.. "Low velocity impact of thermosetting composite systems modified with rubber and cork powders". Science and Engineering of Composite Materials 12 1-2 (2005): 103-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-19844367539&partnerID=MN8TOARS.
  101. Ribeiro, M.C.S.; Nóvoa, P.R.; Ferreira, A.J.M.; Marques, A.T.. "Flexural performance of polyester and epoxy polymer mortars under severe thermal conditions". Cement and Concrete Composites 26 7 (2004): 803-809. http://www.scopus.com/inward/record.url?eid=2-s2.0-3843097089&partnerID=MN8TOARS.
    10.1016/S0958-9465(03)00162-8
  102. Nóvoa, P.J.R.O.; Ribeiro, M.C.S.; Ferreira, A.J.M.; Marques, A.T.. "Mechanical characterization of lightweight polymer mortar modified with cork granulates". Composites Science and Technology 64 13-14 (2004): 2197-2205. http://www.scopus.com/inward/record.url?eid=2-s2.0-17944393787&partnerID=MN8TOARS.
    10.1016/j.compscitech.2004.03.006
  103. de Morais, A.B.; Rebelo, C.C.; de Castro, P.M.S.T.; Marques, A.T.; Davies, P.. "Interlaminar fracture studies in Portugal: Past, present and future". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 767-773. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143078054&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00744.x
  104. Pereira, A.B.; de Morais, A.B.; Marques, A.T.; de Castro, P.T.. "Mode II interlaminar fracture of carbon/epoxy multidirectional laminates". Composites Science and Technology 64 10-11 (2004): 1653-1659. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442679503&partnerID=MN8TOARS.
    10.1016/j.compscitech.2003.12.001
  105. Rodrigues, J.A.; Marques, A.T.. "The influence of flame retardant agents in the fire performance of SMC". Materials Science Forum 455-456 (2004): 849-852. http://www.scopus.com/inward/record.url?eid=2-s2.0-3142705799&partnerID=MN8TOARS.
  106. Vieira, P.; Pinho, S.T.; Marques, A.T.; Vieira, A.; Nicolau, A.; Oliveira, P.. "Manufacture of a fin-box made by RTM". Materials Science Forum 455-456 (2004): 890-894. http://www.scopus.com/inward/record.url?eid=2-s2.0-3142752666&partnerID=MN8TOARS.
  107. Sousa, M.; Novo, C.; Costa, A.N.; Marques, A.T.; Justo, J.. "Use of composite materials to renovate a steel water pipe". Materials Science Forum 455-456 (2004): 853-856. http://www.scopus.com/inward/record.url?eid=2-s2.0-3142767524&partnerID=MN8TOARS.
  108. De Oliveira, R.; Frazão, O.; Santos, J.L.; Marques, A.T.. "Optic fibre sensor for real-time damage detection in smart composite". Computers and Structures 82 17-19 (2004): 1315-1321. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042818820&partnerID=MN8TOARS.
    10.1016/j.compstruc.2004.03.028
  109. Nunes, J.P.; Silva, J.F.; Van Hattum, F.W.J.; Marques, A.T.. "Filament winding processing conditions to produce thermoplastic composites from towpregs". Annual Technical Conference - ANTEC, Conference Proceedings 2 (2004): 1588-1592. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442429673&partnerID=MN8TOARS.
  110. Romão, C.; Vieira, P.; Peito, F.; Marques, A.T.; Esteves, J.L.. "Single filament mechanical characterisation of hemp fibres for reinforcing composite materials". Molecular Crystals and Liquid Crystals 418 (2004): http://www.scopus.com/inward/record.url?eid=2-s2.0-10044260847&partnerID=MN8TOARS.
    10.1080/15421400490479172
  111. Nunes, J.P.; Van Hattum, F.W.J.; Bernardo, C.A.; Silva, J.F.; Marques, A.T.. "Advances in thermoplastic matrix towpregs processing". Journal of Thermoplastic Composite Materials 17 6 (2004): 523-544. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442489063&partnerID=MN8TOARS.
    10.1177/0892705704038470
  112. Ribeiro, M.C.S.; Ferreira, A.J.M.; Marques, A.T.. "Analysis and experiments on FRP-polymer concrete hybrid beams". Journal of Polymer Engineering 23 5 (2003): 337-351. http://www.scopus.com/inward/record.url?eid=2-s2.0-0347129901&partnerID=MN8TOARS.
  113. Ribeiro, M.C.S.; Reis, J.M.L.; Ferreira, A.J.M.; Marques, A.T.. "Thermal expansion of epoxy and polyester polymer mortars - Plain mortars and fibre-reinforced mortars". Polymer Testing 22 8 (2003): 849-857. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141951918&partnerID=MN8TOARS.
    10.1016/S0142-9418(03)00021-7
  114. Ribeiro, M.C.S.; Ferreira, A.J.M.; Marques, A.T.. "Assessment of thermal degradation on polymer mortars". Journal of Polymer Engineering 23 5 (2003): 299-313. http://www.scopus.com/inward/record.url?eid=2-s2.0-0345868669&partnerID=MN8TOARS.
  115. Ferrejra, A.J.M.; Sa, J.M.; Marques, A.T.. "Nonlinear finite-element analysis of rubber composite shells". Problemy Prochnosti 3 (2003): 15-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-0142085808&partnerID=MN8TOARS.
  116. Justo, J.; Marques, A.T.. "High velocity impact resistance of composite materials". Journal De Physique. IV : JP 110 (2003): 651-656. http://www.scopus.com/inward/record.url?eid=2-s2.0-0242664129&partnerID=MN8TOARS.
  117. Reis, J.M.L.; De Oliveira, R.; Ferreira, A.J.M.; Marques, A.T.. "A NDT assessment of fracture mechanics properties of fiber reinforced polymer concrete". Polymer Testing 22 4 (2003): 395-401. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037409601&partnerID=MN8TOARS.
    10.1016/S0142-9418(02)00120-4
  118. Nunes, J.P.; Silva, J.F.; Marques, A.T.; Crainic, N.; Cabral-Fonseca, S.. "Production of powder-coated towpregs and composites". Journal of Thermoplastic Composite Materials 16 3 (2003): 231-248. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038679542&partnerID=MN8TOARS.
    10.1177/0892705703016003003
  119. Crainic, N.; Marques, A.T.. "Nanocomposites: A state-of-the-art review". Key Engineering Materials 230-232 (2002): 656-659. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036436002&partnerID=MN8TOARS.
  120. Ribeiro, M.C.S.; Tavares, C.M.L.; Ferreira, A.J.M.; Marques, A.T.. "Static flexural performance of GFRP-polymer concrete hybrid beams". Key Engineering Materials 230-232 (2002): 148-151. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036430548&partnerID=MN8TOARS.
  121. Costa, A.N.; Novo, C.; Correia, N.; Marques, A.T.; De Araújo, M.; Fangueiro, R.; Hong, H.; Ciobanu, L.. "Structural composite parts production from textile preforms". Key Engineering Materials 230-232 (2002): 36-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-17144448418&partnerID=MN8TOARS.
  122. Pinho, S.T.; Novo, C.; Nicolau, A.; Vieira, A.; Correia, N.; Marques, A.T.. "Permeability tests of carbon fibre preforms". Key Engineering Materials 230-232 (2002): 331-334. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036430685&partnerID=MN8TOARS.
  123. Lafuente, T.; Nowacki, J.; Mitschang, P.; Torres Marques, A.; Neitzel, M.. "Tailored blank technology: A one-step-process". Journal of Thermoplastic Composite Materials 15 4 (2002): 355-371. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036648329&partnerID=MN8TOARS.
    10.1177/0892705702015004734
  124. De Morais, A.B.; De Moura, M.F.; Marques, A.T.; De Castro, P.T.. "Mode-I interlaminar fracture of carbon-epoxy cross-ply composites". Composites Science and Technology 62 5 (2002): 679-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036534675&partnerID=MN8TOARS.
    10.1016/S0266-3538(01)00223-8
  125. De Moura, M.F.S.F.; Marques, A.T.. "Prediction of low velocity impact damage in carbon-epoxy laminates". Composites - Part A: Applied Science and Manufacturing 33 3 (2002): 361-368. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036497729&partnerID=MN8TOARS.
    10.1016/S1359-835X(01)00119-1
  126. De Morais, A.B.; Silva, J.F.; Marques, A.T.; De Castro, P.T.. "Mode II interlaminar fracture of filament wound angle-ply specimens". Applied Composite Materials 9 2 (2002): 117-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036498212&partnerID=MN8TOARS.
    10.1023/A:1013898312796
  127. Ferreira, A.J.M.; Camanho, P.P.; Marques, A.T.; Fernandes, A.A.. "Modelling of concrete beams reinforced with FRP re-bars". Composite Structures 53 1 (2001): 107-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035399984&partnerID=MN8TOARS.
    10.1016/S0263-8223(00)00182-3
  128. De Oliveira Simões, J.A.; Marques, A.T.. "Determination of stiffness properties of braided composites for the design of a hip prosthesis". Composites Part A: Applied Science and Manufacturing 32 5 (2001): 655-662. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035341768&partnerID=MN8TOARS.
    10.1016/S1359-835X(00)00157-3
  129. Ferreira, A.J.M.; Barbosa, J.T.; Marques, A.T.; De Sá, J.C.. "Non-linear analysis of sandwich shells: the effect of core plasticity". Computers and Structures 76 1 (2000): 337-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033901415&partnerID=MN8TOARS.
    10.1016/S0045-7949(99)00156-X
  130. Simões, J.A.; Marques, A.T.; Jeronimidis, G.. "Design of a controlled-stiffness composite proximal femoral prosthesis". Composites Science and Technology 60 4 (2000): 559-567. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033874840&partnerID=MN8TOARS.
  131. Gonçalves, J.P.M.; De Moura, M.F.S.F.; De Castro, P.M.S.T.; Marques, A.T.. "Interface element including point-to-surface constraints for three-dimensional problems with damage propagation". Engineering Computations (Swansea, Wales) 17 1 (2000): 28-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342955781&partnerID=MN8TOARS.
  132. Marques, A.T.; Balacó de Morais, A.; Francisco Silva, J.; Tavares de Castro, P.. "Fracture mechanics concepts and structural integrity of filament wound pipes". European Structural Integrity Society 26 C (2000): 253-261. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957082965&partnerID=MN8TOARS.
    10.1016/S1566-1369(00)80053-9
  133. Novo, C.; Frazao, O.; Costa, A.N.; Vieira, A.; Correia, N.; Dias, I.; Araujo, F.M.; Marques, A.Torres. "Progression monitoring of the flow front in RTM process using fibre Bragg grating sensors". Proceedings of SPIE - The International Society for Optical Engineering 4185 (2000): 808-811. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034462907&partnerID=MN8TOARS.
  134. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Marques, A.T.; De Castro, P.M.S.T.. "Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model". Composite Structures 50 2 (2000): 151-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040952748&partnerID=MN8TOARS.
  135. Mendes Ferreira, A.J.; Torres Marques, A.; César De Sá, J.. "Analysis of reinforced concrete with external composite strengthening". Composites Part B: Engineering 31 6-7 (2000): 527-534. http://www.scopus.com/inward/record.url?eid=2-s2.0-0343774109&partnerID=MN8TOARS.
    10.1016/S1359-8368(99)00054-2
  136. Miranda Guedes, R.; Morais, J.J.L.; Marques, A.T.; Cardon, A.H.. "Prediction of long-term behaviour of composite materials". Computers and Structures 76 1 (2000): 183-194. http://www.scopus.com/inward/record.url?eid=2-s2.0-0343168064&partnerID=MN8TOARS.
    10.1016/S0045-7949(99)00178-9
  137. Guedes, R.M.; Marques, A.T.; Cardon, A.. "Creep/creep-recovery response of fibredux 920C-TS-5-42 composite under flexural loading". Applied Composite Materials 6 2 (1999): 71-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032669147&partnerID=MN8TOARS.
    10.1023/A:1008800816557
  138. Sirnoes, J.A.O.; Taylor, M.; Marques, A.T.; Jeronimidis, G.. "Preliminary investigation of a novel controlled stiffness proximal femoral prosthesis". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 212 3 (1998): 165-175. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031626714&partnerID=MN8TOARS.
  139. Guedes, R.M.; Marques, A.T.; Cardon, A.. "Analytical and Experimental Evaluation of Nonlinear Viscoelastic-Viscoplastic Composite Laminates under Creep, Creep-Recovery, Relaxation and Ramp Loading". Mechanics Time-Dependent Materials 2 2 (1998): 113-128. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040542460&partnerID=MN8TOARS.
  140. Guedes, R.M.; Marques, A.T.; Cardon, A.. "Creep or relaxation master curves calculated from experimental dynamic viscoelastic function". Science and Engineering of Composite Materials 7 3 (1998): 259-267. http://www.scopus.com/inward/record.url?eid=2-s2.0-0039949597&partnerID=MN8TOARS.
  141. De Morais, A.B.; Marques, A.T.. "A micromechanical model for the prediction of the lamina longitudinal compression strength of composite laminates". Journal of Composite Materials 31 14 (1997): 1397-1412. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030703346&partnerID=MN8TOARS.
  142. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Marques, A.T.; De Castro, P.M.S.T.. "Modeling compression failure after low velocity impact on laminated composites using interface elements". Journal of Composite Materials 31 15 (1997): 1462-1479. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030688730&partnerID=MN8TOARS.
  143. Magalhães, A.G.; Marques, A.T.; Oliveira, F.M.F.; Soukatchoff, P.; De Castro, P.T.. "Mechanical behaviour of cementitious matrix composites". Cement and Concrete Composites 18 1 (1996): 9-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029733906&partnerID=MN8TOARS.
    10.1016/0958-9465(95)00035-6
  144. Conceicao António, C.A.; Torres Marques, A.; Gonçalves, J.F.. "Reliability based design with a degradation model of laminated composite structures". Structural and Multidisciplinary Optimization 12 1 (1996): 16-28. http://www.scopus.com/inward/record.url?eid=2-s2.0-53349120928&partnerID=MN8TOARS.
  145. António, C.A.C.; Marques, A.T.; Soeiro, A.V.. "Optimization of laminated composite structures using a bilevel strategy". Composite Structures 33 4 (1995): 193-200. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029542347&partnerID=MN8TOARS.
  146. Esteves, Jose L.; Aivazzadeh, Shahram; Marques, Antonio T.. "Joint design: finite element aided design of adhesive joints". ASTM Special Technical Publication 1227 (1994): 109-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028530744&partnerID=MN8TOARS.
  147. Soeiro, A.V.; Conceição António, C.A.; Marques, A.T.. "Multilevel optimization of laminated composite structures". Structural Optimization 7 1-2 (1994): 55-60. http://www.scopus.com/inward/record.url?eid=2-s2.0-9544226018&partnerID=MN8TOARS.
    10.1007/BF01742505
  148. Simoes, J.A.O.; Marques, A.T.; de Castro, P.M.S.T.. "Simulation of the geodesic and non-geodesic trajectories of the filament winding". Proceedings of the International Conference on Advanced Composite Materials (1993): 449-453. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027870781&partnerID=MN8TOARS.
  149. Davies, P.; Kausch, H.H.; Williams, J.G.; Kinloch, A.J.; Charalambides, M.N.; Pavan, A.; Moore, D.R.; et al. "Round-robin interlaminar fracture testing of carbon-fibre-reinforced epoxy and PEEK composites". Composites Science and Technology 43 2 (1992): 129-136. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026627232&partnerID=MN8TOARS.
  150. Rebelo, C.A.C.C.; Marques, A.T.; de Castro, P.M.S.T.. "FRACTURE CHARACTERIZATION OF COMPOSITES IN MIXED MODE LOADING.". (1986): 2195-2204. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022839393&partnerID=MN8TOARS.
  151. Marques, A.T.. "DESIGN AND TEST OF GRP PANELS.". (1984): 661-673. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021699017&partnerID=MN8TOARS.
  152. Darlington, M.W.; Marques, A.T.. "CREEP BEHAVIOUR OF REINFORCED AND NON-REINFORCED RESINS.". 1 (1984): 497-505. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021293023&partnerID=MN8TOARS.
Preprint
  1. Susana P.B. Sousa; António J. Baptista; António Torres Marques. "Material Design-for-Excellence (M-DFX) – A New Holistic Analysis for Glass and Basalt Composite Materials". 2023. https://doi.org/10.20944/preprints202309.0954.v1.
    10.20944/preprints202309.0954.v1

Intellectual property

Patent
  1. BARROS MATOS, João Rui; DE GALHANO TENREIRO, António Francisco; HENRIQUES CAMÕES SOBRAL, João Pedro; GERALDES TOURO PEREIRA, João Paulo; DA QUINTA E COSTA NEVES DE OLIVEIRA, Luis Miguel; Rodrigues Dias Esteves, Sílvia Alexandra; António Torres Marques. 2022. "DEVICE AND METHOD FOR ADAPTIVE CONTROL OF A FUSED DEPOSITION MODELING PRINTER USING THERMOGRAPHY".
    Pending
  2. Helena M.V.M. Soares; António Torres Marques; Margarida M.S.M. Bastos; Liliana M. Martelo; Paulo M.S. Sousa; Ana C. R.V. Dias; Luís M.G.A. Arroja. 2022. "Eco-friendly method for recycling gold fingers from electronic wastes".
    Pending
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2019/09/01 - Current Multi-scale modelling of mechanical relaxation processes in composites and nanocomposites
Supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2023/02/01 - 2023/09/28 Cutting tool for forest vegetation applicable to robots
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2022/02/01 - 2023/09/27 Nanomagnetic Composite Systems
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2023/02/01 - 2023/09/22 Evaluation of Fitness Dynamic Mechanical Data to Classic Polymer Relaxation Models to Predict Creep Behaviour of Thermoset Composites
Co-supervisor
2023/02/01 - 2023/07/03 4D Printing in the Development of a Composite Refugee Shelter
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal
2018/09/01 - 2023/07/03 Development of extended and advanced failure models and design criteria for aerospace composites
Co-supervisor
Universidade do Porto Faculdade de Engenharia, Portugal

Ad Hoc journal article review

Journal title (ISSN) Publisher
2022/12/01 - Current COMPOSTES COMMUNICATIONS (2452-2139) Elsevier
2017 - Current COMPOSTES STRUCTURES (0263-8223) Elsevier
2014/10/10 - Current COMPOSTES B (1359-8368) Elsevier
2006 - Current Composites Science and Technology (0266-3538) Elsevier
2006 - Current Polymers & Polymer Composites (0967-3911) SAGE
2004 - Current Computers and Structures (0045-7949) Elsevier

Association member

Society Organization name Role
2012 - Current Associação Portuguesa de Adesão e Adesivos Member
1985 - Current European Society for Composite Materials Member and Council Member Membership
1982 - Current Associação Portuguesa de Análise Experimental de Tensões Founder member and member Membership
1981 - Current Sociedade Portuguesa de Materiais Member and President during one mandate
1973 - Current Ordem dos Engenheiros Effective member

Journal scientific committee

Journal title (ISSN) Publisher
2012/08/25 - Current COMPOSTES A (ISSN: 1359-835X) Elsevier
Distinctions

Award

2015 Carrer Prize awarded by the Portuguese Society of Biomechanics
Sociedade Portuguesa de Biomecânica, Portugal
2005 SPECIAL AWARD “SPIRIT OF CONQUEST” to The Gas Bottle Project
JEC World – Journées Européennes des Composites, France

Title

2000 Hononary Member of Senate of University Politechnical of Bucareste
University Politechnical of Bucareste, Romania