???global.info.a_carregar???
I have been a Researcher at "Instituto de Engenharia Mecanica e Gestao Industrial" (INEGI). I am a member of the Advanced Joining Process Unit (AJPU) of INEGI. My main research areas are joining, welding and metallurgy. I have conducted several academic researches as well as industrial projects in the field of welding, failure analysis of materials and materials engineering. Working as a professor at the university of Arak since 2015, and serving as a principal investigator at INEGI during the period of 2020-2023, several MSc theses have been carried out under my supervision. I have taught main courses in the fields of welding, physical metallurgy and materials science.
Read full resume ↓
Identification

Personal identification

Full name
Reza Beygi

Citation names

  • Beygi, Reza

Author identifiers

Ciência ID
C31B-F727-C5FC
Google Scholar ID
https://scholar.google.com/citations?user=HhsTP2YAAAAJ&hl=en&oi=sra

Email addresses

  • r-beygi@araku.ac.ir (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Materials Engineering - Materials Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Spanish; Castilian Intermediate (B1) Upper intermediate (B2) Intermediate (B1) Intermediate (B1) Intermediate (B1)
German Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Persian (Mother tongue)
Education
Degree Classification
2009/09/23 - 2014/09/21
Concluded
 Materials science and engineering (Doktor (PhD))
Sharif University of Technology, Iran
"Microstructure and mechanical properties of friction Stir welded Al-Cu laminated composites produced by cold roll bonding" (THESIS/DISSERTATION)
2007/09/23 - 2009/09/20
Concluded
 Materials science and engineering/welding (Master)
Sharif University of Technology, Iran
"Energy Absorption during Wedge Tearing of Al-Fe Bilayer Composites Produced by Cold Roll Welding" (THESIS/DISSERTATION)
2002/09/01 - 2007/09/01
Concluded
 Materials science and engineering (Bachelor)
Sharif University of Technology, Iran
Affiliation

Science

Category
Host institution 		Employer
2020/11/25 - Current Principal Investigator (Research) Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2015/03/02 - Current Assistant Professor (University Teacher) Arak University, Iran
Arak University, Iran
Projects

Grant

Designation Funders
2017/05/01 - 2019/06/01 Design and fabrication of dedicated friction stir welding machine
98/678
Principal investigator
Ministry of Science, Research, and Technology of Iran, Iran
Concluded
2017/04/01 - 2019/04/01 Development of Mg-Ti and Al-Ti alloys
97/1773
Co-Principal Investigator (Co-PI)
Korea Institute of Industrial Technology (KITECH), South Korea
Concluded
2017/05/01 - 2018/05/01 Production of aluminum-matrix composite by friction stir processing with Monel particles
99/1744
Principal investigator
Concluded
2015/08/01 - 2016/08/01 The effect of Calcium on oxidation behavior of AZ91 magnesium alloy
98/9862
Co-Principal Investigator (Co-PI)
Concluded
2015/03/01 - 2016/03/01 Particle-reinforced aluminium matrix composite production by friction stir processing
95/13806
Principal investigator
Concluded

Contract

Designation Funders
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/UIDB/50022/2020
10.54499/UIDP/50022/2020
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2023/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UIDB/50022/2020
10.54499/UIDB/50022/2020
LA/P/0079/2020
10.54499/LA/P/0079/2020
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/01 - 2019/03 Repair Welding of Cast Iron Compressor
98/01
Principal investigator
Machine Sazi Arak (MSA)
Concluded
2018/03 - 2018/06 Repair welding of the body of a heavy Pneumatic forging hammer with 50 tons of force-capacity in Machin Sazi Arak
98/02
Principal investigator
Machine Sazi Arak (MSA), Iran
 Machine Sazi Arak (MSA)
Concluded
2015/03 - 2017/03 Failure analysis of ball bearing used in butane and propane pumps
306185
Principal investigator
Iran ministry of petroleum, Iran
Concluded
Outputs

Publications

Book
  1. Beygi, Reza; Eduardo A. de Sousa Marques; Carbas, Ricardo J.C.; da Silva, Lucas F. M.. Welding Metallurgy of Aluminium Alloys. Design, Processes and Simulations. United States: Wiley. 2024.
    Under revision
  2. Mohammad Mehdi Kasaei; Beygi, Reza; Marques, EAS; Carbas, Ricardo; da Silva, Lucas F. M.. Mechanical Joining by Plastic Deformation. Netherlands: Elsevier. 2024.
    Submitted
  3. Beygi, Reza; Marques, Eduardo; da Silva, Lucas F.M.. Computational Concepts in Simulation of Welding Processes. Springer International Publishing. 2022.
    10.1007/978-3-030-97910-2
Edited book
  1. KHALFALLAH, ALI; Mahmoud, Moradi; Beygi, Reza. Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties. Basel, Switzerland: Multidisciplinary Digital Publishing Institute (MDPI). 2024.
    Published • 10.3390/books978-3-7258-2496-0
Journal article
  1. Beygi, Reza; Talkhabi, Amir Abbas; Mehrizi, Majid Zarezadeh; Marques, Eduardo A. S.; Carbas, Ricardo J. C.; da Silva, Lucas F. M.. "A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior". Metals 13 6 (2023): 1027. http://dx.doi.org/10.3390/met13061027.
    10.3390/met13061027
  2. Beygi, Reza; Galvão, Ivan; Akhavan-Safar, Alireza; Pouraliakbar, Hesam; Fallah, Vahid; da Silva, Lucas F. M.. "Effect of Alloying Elements on Intermetallic Formation during Friction Stir Welding of Dissimilar Metals: A Critical Review on Aluminum/Steel". Metals 13 4 (2023): 768. http://dx.doi.org/10.3390/met13040768.
    10.3390/met13040768
  3. Beygi, R.; Carbas, R.J.C.; Barbosa, A.Q.; Marques, E.A.S.; da Silva, L.F.M.. "Buttering for FSW: Enhancing the fracture toughness of Al-Fe intermetallics through nanocrystallinity and suppressing their growth". Journal of Manufacturing Processes 90 (2023): 233-241. http://dx.doi.org/10.1016/j.jmapro.2023.02.001.
    10.1016/j.jmapro.2023.02.001
  4. Akhavan-Safar, Alireza; Eisaabadi Bozchaloei, Ghasem; Jalali, Shahin; Beygi, Reza; Ayatollahi, Majid R.; da Silva, Lucas F. M.. "Impact Fatigue Life of Adhesively Bonded Composite-Steel Joints Enhanced with the Bi-Adhesive Technique". Materials 16 1 (2023): 419. http://dx.doi.org/10.3390/ma16010419.
    10.3390/ma16010419
  5. Nonnenmann, Timo; Beygi, R; Carbas, RJC; da Silva, LFM; Öchsner, Andreas. "Feasibility study on hybrid weld-bonding between dissimilar material for automotive industry". International Journal of Adhesion and Adhesives 121 (2023): 103316. http://dx.doi.org/10.1016/j.ijadhadh.2022.103316.
    10.1016/j.ijadhadh.2022.103316
  6. Beygi, Reza; Zarezadeh Mehrizi, Majid; Akhavan-Safar, Alireza; Mohammadi, Sajjad; da Silva, Lucas F. M.. "A Parametric Study on the Effect of FSW Parameters and the Tool Geometry on the Tensile Strength of AA2024–AA7075 Joints: Microstructure and Fracture". Lubricants 11 2 (2023): 59. http://dx.doi.org/10.3390/lubricants11020059.
    10.3390/lubricants11020059
  7. Nonnenmann, Timo; Beygi, Reza; Carbas, Ricardo J.C.; da Silva, Lucas F.M.; Öchsner, Andreas. "Synergetic effect of adhesive bonding and welding on fracture load in hybrid joints". Journal of Advanced Joining Processes 6 (2022): 100122. http://dx.doi.org/10.1016/j.jajp.2022.100122.
    10.1016/j.jajp.2022.100122
  8. Beygi, R; Akhavan-Safar, A; Carbas, R; Barbosa, AQ; Marques, EAS; da Silva, LFM. "Utilizing a ductile damage criterion for fracture analysis of a dissimilar aluminum/steel joint made by friction stir welding". Engineering Fracture Mechanics 274 (2022): 108775. http://dx.doi.org/10.1016/j.engfracmech.2022.108775.
    10.1016/j.engfracmech.2022.108775
  9. Moradi, Mahmoud; Beygi, Reza; Mohd. Yusof, Noordin; Amiri, Ali; da Silva, L. F. M.; Sharif, Safian. "3D Printing of Acrylonitrile Butadiene Styrene by Fused Deposition Modeling: Artificial Neural Network and Response Surface Method Analyses". Journal of Materials Engineering and Performance 32 4 (2022): 2016-2028. http://dx.doi.org/10.1007/s11665-022-07250-0.
    10.1007/s11665-022-07250-0
  10. Akhavan-Safar, Alireza; Eisaabadi B., Ghasem; Jalali, Shahin; Beygi, Reza; Silva, Lucas F. M.. "Impact fatigue life improvement of bonded structures using the bi-adhesive technique". Fatigue & Fracture of Engineering Materials & Structures (2022): http://dx.doi.org/10.1111/ffe.13666.
    10.1111/ffe.13666
  11. Pouraliakbar, Hesam; Beygi, Reza; Fallah, Vahid; Hosseini Monazzah, Asal; Reza Jandaghi, Mohammad; Khalaj, Gholamreza; da Silva, Lucas F.M.; Pavese, Matteo. "Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution". Materials Letters 308 (2022): 131157. http://dx.doi.org/10.1016/j.matlet.2021.131157.
    10.1016/j.matlet.2021.131157
  12. Alikhani, A.; Beygi, R.; Zarezadeh Mehrizi, M.; Nematzadeh, F.; Galvão, I.. "Effect of Mg and Si on intermetallic formation and fracture behavior of pure aluminum-galvanized carbon-steel joints made by weld-brazing". Journal of Central South University 28 11 (2021): 3626-3638. http://dx.doi.org/10.1007/s11771-021-4880-x.
    10.1007/s11771-021-4880-x
  13. Beygi, R.; Pouraliakbar, H.; Torabi, K.; Eisaabadi B., G.; Fallah, V.; Kim, S.K.; Shi, R.; da Silva, L.F.M.. "The inhibitory effect of stir zone liquefaction and eutectic-phase formation on the growth of ¿/ß intermetallics during dissimilar FSW of Al/Mg alloys". Journal of Manufacturing Processes 70 (2021): 152-162. http://dx.doi.org/10.1016/j.jmapro.2021.08.049.
    10.1016/j.jmapro.2021.08.049
  14. Beygi, R.; Carbas, R.; Queiros, A.; Marques, E. A. S.; Shi, R.; da Silva, L. F. M.. "Comparative Study Between Stainless Steel and Carbon Steel During Dissimilar Friction Stir Welding with Aluminum: Kinetics of Al–Fe Intermetallic Growth". Metals and Materials International (2021): http://dx.doi.org/10.1007/s12540-021-01070-y.
    10.1007/s12540-021-01070-y
  15. Beygi, R.; Carbas, R.J.C; Barbosa, A.Q.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of ¿ and steel in aluminum/steel joints made by FSW: Microstructure and fracture behavior". Materials Science and Engineering: A 824 (2021): 141812. http://dx.doi.org/10.1016/j.msea.2021.141812.
    10.1016/j.msea.2021.141812
  16. Akhavan-Safar, A; Beygi, R; Delzendehrooy, F; da Silva, LFM. "Fracture energy assessment of adhesives – Part I: Is GIC an adhesive property? A neural network analysis". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235 6 (2021): 1461-1476. http://dx.doi.org/10.1177/14644207211002763.
    10.1177/14644207211002763
  17. Delzendehrooy, F.; Beygi, R.; Akhavan-Safar, A.; da Silva, L.F.M.. "Fracture energy assessment of adhesives Part II: Is G an adhesive material property? (A neural network analysis)". Journal of Advanced Joining Processes 3 (2021): 100049. http://dx.doi.org/10.1016/j.jajp.2021.100049.
    10.1016/j.jajp.2021.100049
  18. Kamalvand, Ezatolah; Jabbari, Ali; Sheykholeslami, Mohammad Reza; Mazdak, Siamak; Beygi, Reza; Mohammadi, Sajad. "Effect of friction stir welding parameters on the deep drawing of tailor-welded blanks (TWBs)". CIRP Journal of Manufacturing Science and Technology 33 (2021): 91-99. http://dx.doi.org/10.1016/j.cirpj.2021.02.011.
    10.1016/j.cirpj.2021.02.011
  19. Beygi, R.; Zarezadeh Mehrizi, M.; Akhavan-Safar, A.; Safaei, S.; Loureiro, A.; da Silva, L. F. M.. "Design of friction stir welding for butt joining of aluminum to steel of dissimilar thickness: heat treatment and fracture behavior". The International Journal of Advanced Manufacturing Technology 112 7-8 (2021): 1951-1964. http://dx.doi.org/10.1007/s00170-020-06406-3.
    10.1007/s00170-020-06406-3
  20. Mehrizi, M Zarezadeh; Jalali, H; Beygi, R; Velashjerdi, M. "Synthesis of NiAl-TiC nanocomposite during mechanical alloying of Ni–Ti–Al–C powder mixture". Materials Research Express 6 12 (2019): 125063. http://dx.doi.org/10.1088/2053-1591/ab57cd.
    10.1088/2053-1591/ab57cd
  21. Goudarzi, A.; Lalianpour, A.; Zarezadeh Mehrizi, M.; Beygi, R.; Eisaabadi B, G.. "Fabrication of NiAl–Al2O3-WC nanocomposite by mechanical alloying and subsequent heat treatment". Ceramics International 45 15 (2019): 19049-19054. http://dx.doi.org/10.1016/j.ceramint.2019.06.147.
    10.1016/j.ceramint.2019.06.147
  22. Zarezadeh Mehrizi, M.; Momeni, M.R.; Beygi, R.; Eisaabadi B., G.; Kim, Bong-Hwan; Kim, Shae-Kwan. "Reaction pathway of NiAl/WC nanocomposite synthesized from mechanical activated Ni Al W C powder system". Ceramics International 45 9 (2019): 11833-11837. http://dx.doi.org/10.1016/j.ceramint.2019.03.062.
    10.1016/j.ceramint.2019.03.062
  23. Beygi, Reza; Mehrizi, Majid Zarezadeh; Mostaan, Hossein; Rafiei, Mahdi; Abbasian, Ahmadreza. "Synthesis of a NiTi2-AlNi-Al2O3 nanocomposite by mechanical alloying and heat treatment of Al-TiO2-NiO". International Journal of Minerals, Metallurgy, and Materials 26 3 (2019): 345-349. http://dx.doi.org/10.1007/s12613-019-1743-7.
    10.1007/s12613-019-1743-7
  24. Zarezadeh Mehrizi, M.; Beygi, R.; Eisaabadi B, Gh.; Velashjerdi, M.; Nematzadeh, F.. "Mechanically activated combustion synthesis of Ti3AlC2/Al2O3 nanocomposite from TiO2/Al/C powder mixtures". Advanced Powder Technology 30 2 (2019): 311-316. http://dx.doi.org/10.1016/j.apt.2018.11.007.
    10.1016/j.apt.2018.11.007
  25. Eisaabadi B., Ghasem; Tiryakioglu, Murat; Yeom, G.Y.; Netto, Nelson; Beygi, R.; Mehrizi, M.Z.; Kim, S.K.. "The effect of solution treatment time on the tensile deformation characteristics of naturally-aged A383 alloy die castings". Materials Science and Engineering: A 731 (2018): 80-84. http://dx.doi.org/10.1016/j.msea.2018.06.028.
    10.1016/j.msea.2018.06.028
  26. Mostafaei, Mohammad; Ghobadi, Mahdi; Beygi, Reza; Zarezadeh Mehrizi, Majid; Eisaabadi B., Ghasem. "New numerical/experimental model for prediction of tensile properties in aluminum A357 castings: the effect of microstructure and microshrinkages". International Journal of Cast Metals Research 31 6 (2018): 332-345. http://dx.doi.org/10.1080/13640461.2018.1483480.
    10.1080/13640461.2018.1483480
  27. Beygi, R.; Mehrizi, M. Zarezadeh; Verdera, D.; Loureiro, A.. "Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals". Journal of Materials Processing Technology 255 (2018): 739-748. http://dx.doi.org/10.1016/j.jmatprotec.2018.01.033.
    10.1016/j.jmatprotec.2018.01.033
  28. Zarezadeh Mehrizi, M.; Beygi, R.. "Direct synthesis of Ti3AlC2-Al2O3 nanocomposite by mechanical alloying". Journal of Alloys and Compounds 740 (2018): 118-123. http://dx.doi.org/10.1016/j.jallcom.2018.01.039.
    10.1016/j.jallcom.2018.01.039
  29. Eisaabadi B., G.; Yeom, GY; Tiryakioglu, Murat; Netto, Nelson; Beygi, R.; Mehrizi, M.Z.; Kim, SK. "The effect of solution treatment time on the microstructure and ductility of naturally-aged A383 alloy die castings". Materials Science and Engineering: A 722 (2018): 1-7. http://dx.doi.org/10.1016/j.msea.2018.02.103.
    10.1016/j.msea.2018.02.103
  30. Zarezadeh Mehrizi, M.; Ahmadi, S.; Beygi, R.; Asadi, M.. "Fabrication of Cerium Oxide Nanoparticles by Solution Combustion Synthesis and Their Cytotoxicity Evaluation". Russian Journal of Non-Ferrous Metals 59 1 (2018): 111-116. http://dx.doi.org/10.3103/s1067821218010170.
    10.3103/s1067821218010170
  31. Zarezadeh Mehrizi, Majid; Mostaan, Hossein; Beygi, Reza; Rafiei, Mahdi; Abbasian, Ahmad Reza. "Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture". Russian Journal of Non-Ferrous Metals 59 1 (2018): 117-122. http://dx.doi.org/10.3103/s1067821218010108.
    10.3103/s1067821218010108
  32. Mostaan, Hossein; Mehrizi, Majid Zarezadeh; Beygi, Reza; Rafiei, Mahdi; Abbasian, Ahmad Reza. "Response to comments from M. Sharifitabar on the paper “Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al 2 O 3 hybrid nanocomposite”". Ceramics International 43 11 (2017): 8544. http://dx.doi.org/10.1016/j.ceramint.2017.03.107.
    10.1016/j.ceramint.2017.03.107
  33. Eisaabadi, G.; Nouri, A.. "Effect of Sr on the Microstructure of Electromagnetically Stirred Semi-solid Hypoeutectic Al–Si Alloys". International Journal of Metalcasting 12 2 (2017): 292-297. http://dx.doi.org/10.1007/s40962-017-0161-8.
    10.1007/s40962-017-0161-8
  34. Beygi, R.; Mehrizi, M. Zarezadeh; Eisaabadi B, G.. "Friction Stir Processing of Al with Mechanically Alloyed Al-TiO2-Graphite Powder: Microstructure and Mechanical Properties". Journal of Materials Engineering and Performance 26 3 (2017): 1455-1462. http://dx.doi.org/10.1007/s11665-017-2552-7.
    10.1007/s11665-017-2552-7
  35. Mostaan, Hossein; Mehrizi, Majid Zarezadeh; Rafiei, Mahdi; Beygi, Reza; Abbasian, Ahmad Reza. "Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite". Ceramics International 43 2 (2017): 2680-2685. http://dx.doi.org/10.1016/j.ceramint.2016.11.082.
    10.1016/j.ceramint.2016.11.082
  36. Mehrizi, M. Zarezadeh; Beygi, Reza. "THERMODYNAMIC ANALYSIS OF SOLID SOLUTION FORMATION IN THE NANOCRYSTALLINE W-CO-SI TERNARY SYSTEM BY MECHANICAL ALLOYING". JOURNAL OF ADVANCED MATERIALS AND PROCESSING (JOURNAL OF MATERIALS SCIENCE) 5 (2017):
    Published
  37. Mehrizi, M. Zarezadeh; Beygi, Reza. "Thermodynamic analysis of nanocrystalline solid solution formation in the W-Co-Si ternary system by mechanical alloying". Journal of Advanced Materials and Processing (2017):
    Published
  38. Mehrizi, M. Zarezadeh; Beygi, R.; Mostaan, H.; Raoufi, M.; Barati, A.. "Mechanical activation-assisted combustion synthesis of in situ aluminum matrix hybrid (TiC/Al2O3) nanocomposite". Ceramics International 42 15 (2016): 17089-17094. http://dx.doi.org/10.1016/j.ceramint.2016.07.219.
    10.1016/j.ceramint.2016.07.219
  39. Mehrizi, M. Zarezadeh; Beygi, R.; Eisaabadi, Gh.. "Synthesis of Al/TiC–Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment". Ceramics International 42 7 (2016): 8895-8899. http://dx.doi.org/10.1016/j.ceramint.2016.02.144.
    10.1016/j.ceramint.2016.02.144
  40. Beygi, R.; Kazeminezhad, M.; Mehrizi, M. Zarezadeh; B, G. Eisaabadi; Loureiro, A.. "Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature". The International Journal of Advanced Manufacturing Technology 88 1-4 (2016): 393-400. http://dx.doi.org/10.1007/s00170-016-8778-y.
    10.1007/s00170-016-8778-y
  41. Mehrizi, M. Zarezadeh; Eisaabadi, Gh.; Beygi, R.. "Hot corrosion behavior of CoWSi/WSi2 coating exposed to Na2SO4+NaCl salt at 900 °C". Ceramics International 42 3 (2016): 3959-3964. http://dx.doi.org/10.1016/j.ceramint.2015.11.064.
    10.1016/j.ceramint.2015.11.064
  42. Beygi, R.; Kazeminezhad, M.; Kokabi, A. H.; Loureiro, A.. "Friction Stir Welding of Al-Cu Bilayer Sheet by Tapered Threaded Pin: Microstructure, Material Flow, and Fracture Behavior". Metallurgical and Materials Transactions A 46 6 (2015): 2544-2553. http://dx.doi.org/10.1007/s11661-015-2859-7.
    10.1007/s11661-015-2859-7
  43. Beygi, R.; Kazeminezhad, Mohsen; Kokabi, A.H.; Alvani, S. Mohammad Javad; Verdera, D.; Loureiro, Altino. "Influence of Tool Geometry and Contact Condition on Friction Stir Welding of Al-Cu Laminated Composites". Advanced Materials Research 856 (2013): 16-21. http://dx.doi.org/10.4028/www.scientific.net/amr.856.16.
    10.4028/www.scientific.net/amr.856.16
  44. Beygi, R.; Kazeminezhad, Mohsen; Kokabi, A. H.. "Microstructural Evolution and Fracture Behavior of Friction-Stir-Welded Al-Cu Laminated Composites". Metallurgical and Materials Transactions A 45 1 (2013): 361-370. http://dx.doi.org/10.1007/s11661-013-1989-z.
    10.1007/s11661-013-1989-z
  45. Beygi, R.; Kazeminezhad, Mohsen; Kokabi, A. H.. "Microstructural Evolution and Fracture Behavior of Friction-Stir-Welded Al-Cu Laminated Composites". Metallurgical and Materials Transactions A 45 1 (2013): 361-370. http://dx.doi.org/10.1007/s11661-013-1989-z.
    10.1007/s11661-013-1989-z
  46. BEYGI, R.; KAZEMINEZHAD, M.; KOKABI, A.H.. "Butt joining of Al–Cu bilayer sheet through friction stir welding". Transactions of Nonferrous Metals Society of China 22 12 (2012): 2925-2929. https://www.sciencedirect.com/science/article/abs/pii/S1003632611615550.
    Accepted • 10.1016/s1003-6326(11)61555-0
  47. Beygi, R.; Kazeminezhad, M.. "Tearing energy of an annealed bilayer sheet through multiple and single tensile tests". Materials Science and Engineering: A 528 29-30 (2011): 8800-8803. http://dx.doi.org/10.1016/j.msea.2011.08.029.
    10.1016/j.msea.2011.08.029
  48. Beygi, R.; Kazeminezhad, M.. "Energy absorption mechanism of Al–steel bilayer sheets produced by cold roll welding during wedge tearing". International Journal of Mechanical Sciences 52 12 (2010): 1613-1619. http://dx.doi.org/10.1016/j.ijmecsci.2010.08.002.
    10.1016/j.ijmecsci.2010.08.002
  49. Beygi, R.; Kazeminezhad, M.. "The effects of annealing phenomena on the energy absorption of roll-bonded Al–steel sheets during wedge tearing". Materials Science and Engineering: A 527 27-28 (2010): 7329-7333. http://dx.doi.org/10.1016/j.msea.2010.07.096.
    10.1016/j.msea.2010.07.096
  50. ALVANI, S.M.J.; AASHURI, H.; KOKABI, A.; BEYGI, R.. "Semisolid joining of aluminum A356 alloy by partial remelting and mechanical stirring". Transactions of Nonferrous Metals Society of China 20 9 (2010): 1792-1798. http://dx.doi.org/10.1016/s1003-6326(09)60376-9.
    10.1016/s1003-6326(09)60376-9
Journal issue
  1. KHALFALLAH, ALI; Beygi, Reza. "Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 2nd Edition". Crystals (2025): https://www.mdpi.com/journal/crystals/special_issues/F11TPDY50B.
    Accepted
  2. KHALFALLAH, ALI; Moradi, Mahmoud; Beygi, Reza. "Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 1st Edition". Crystals (2024): https://www.mdpi.com/journal/crystals/special_issues/D36F0198NS.
    Published
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2024/05/10 Numerical analysis of FSW of Aluminum to steel with dissimilar thicknesses 2nd International Conference on Engineering Manufacture 2024 (EM 2024)
University of Porto (Porto, Portugal)
2024/05/09 Joining of aluminium/steel sheets with dissimilar thicknesses by FSW: Joint design and mechanism of welding 2nd International Conference on Engineering Manufacture 2024 (EM 2024)
University of Porto (Porto, Portugal)
2024/05/09 Development of novel welding processes for high performance multi-material applications 2nd International Conference on Engineering Manufacture 2024 (EM 2024)
University of Porto (Porto, Portugal)
2023/10/20 Modification of Al-Fe Intermetallic Structure with Cr and Ni and a Tremendous Enhancement of the Joint Strength: A Comprehensive Characterization 3RD INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES
University of Porto (Portugal)
2023/10/20 The Effect of Preheating Temperature on Joint Improvement in Friction Drilling of Dissimilar Sheet Metals (AA6061/AISI304L) 3RD INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES
University of Porto (Porto, Portugal)
2023/10/19 A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee- Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behaviour 3RD INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES
University of Porto (Portugal)
2023/09/19 Study on Formability of Similar and Dissimilar FSW Joints of AA2024 and AA7075 Aluminum Sheets during Biaxial Tension 3RD INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES
University of Porto (Porto, Portugal)
2023/06/08 A novel procedure for friction stir welding aluminium to copper by using an aluminium run-on plate The 11th Asia Conference on Mechanical and Materials Engineering (ACMME 2023)
Asian Conference on Mechanical and Materials Engineering (Japan)
2022/07/08 Effect of tool design on the joint strength of Al2024-Al7075 welds made by FSW: A response surface analysis 4th international conference on machine design and application
University of Porto (Porto, Portugal)
2022/07/07 Mechanical properties and ductile damage of magnesium alloy processed by friction stir processing 4th international conference on machine design and application
University of Porto (Porto, Portugal)
2022/05/06 Analysis of joints between thin dissimilar sheets produced by FSW and subsequent rolling 1st international conference on engineering manufacture
University of Porto (Porto, Portugal)
2022/05 Buttering of steel before friction stir welding for improving the joint strength of aluminium-steel joints: Fracture behaviour and interface characterization 1st international conference on engineering manufacture
University of Porto (Porto, Portugal)
2021/10/22 Role of SiC Powder in Reducing the Porosity and Increasing the Carbon Content in Wire Arc Additive Manufacturing of Carbon Steel 2nd International Conference on Advanced Joining Processes
(Sintra, Portugal)
2021/10/21 Utilizing a Ductile Damage Criterion for Fracture Analysis of a Dissimilar Aluminum/Steel Joint Made by FSW 2nd International Conference on Advanced Joining Processes
University of Porto (Sintra, Portugal)
2020/11/06 Fracture energy assessment of adhesives – Part I: Is GIC an adhesive property? A neural network analysis 3rd International Conference on Materials Design and Applications 2020
INEGI (Porto, Portugal)
2020/11/05 Fracture energy assessment of adhesives Part II: Is GIIc an adhesive material property? (A neural network analysis) 3rd International Conference on Materials Design and Applications 2020
University of Porto (Porto, Portugal)
2018/02 Improvement of joint strength between aluminum and copper by multi-pass friction stir welding 18th Conference on Welding and Non-destructive testing
Iranian Institute of Welding & NDT (IWNT) (Arak, Iran)
2018/02 The effect of surface contact on the joint strength of aluminum to magnesium made by friction stir lap welding 18th Conference on Welding and Non-destructive testing
Iranian Institute of Welding & NDT, (IWNT) (Arak, Iran)
2017/11 The effect of heat treatment on weld strength of Al-Steel joints with different thicknesses IMAT
Iranian Metallurgical and Materials Engineering Society (Tehran, Iran)
2009/07 Energy absorption mechanism during tearing of aluminum-steel bi-metals joined by cold roll bonding International conference on welding and non-destructive tests
Iranian Institute of Welding & NDT (IWNT) (Tehran, Iran)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2024/01 - Current The effect of buttering operation on the thermal stability of aluminum to steel joints at high temperature by FSW process
Supervisor
 Welding engineering (Master)
Arak University, Iran
2024/01 - Current The effect of buttering on the microstructure of dual-phase steel
Supervisor
 Materials science and engineering (Master)
Arak University, Iran
2024/01 - Current Comparison of microstructure and mechanical properties of aluminum-dual phase steel welds with and without buttering
Supervisor
 Materials science and engineering (Master)
Arak University, Iran
2022/03 - Current Pretreatment of copper surface by brazing before FSW of aluminum to copper for improvement of electrical conduction
Supervisor
 Welding and Joining (Master)
Arak University, Iran
2022/01 - Current Dynamic behavior of car body structure by using light weight structures
Co-supervisor
 Mechanical engineering (PhD)
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
2022/03 - 2024/09 The effect of magnesium alloying elements on the intermetallic formation during friction stir welding of aluminum to magnesium in lap configuration
Supervisor
 Welding engineering (Master)
Arak University, Iran
2024/02 - 2024/08 Characterization of electrical and mechanical properties of aluminum/copper joints made by FSW
Co-supervisor
 Mechanical engineering (Master)
Universidade do Porto Departamento de Engenharia Mecânica, Portugal
2024/02 - 2024/08 Hybrid joining of aluminum-magnesium (AB plus FSW): characterization of mechanical properties
Co-supervisor
 Mechanical engineering (Master)
Universidade do Porto Departamento de Engenharia Mecânica, Portugal
2022/01 - 2024/07 Numerical simulation of heat transfer during friction stir welding process of dissimilar metals
Supervisor
 Welding engineering (Master)
Arak University, Iran
2023/08 - 2024/03 The effect of heat treatment on the joint characteristics of aluminum-steel joints used in transportation industries
Supervisor
 Mechacial engineering (Master)
Universidade do Porto Departamento de Engenharia Mecânica, Portugal
2022/03 - 2023/08 Dual-Pass friction stir welding of aluminum to magnesium in lap configuration
Supervisor
 Welding engineering (Master)
Arak University, Iran
2023/01 - 2023/07 Simulation of friction stir welding of aluminum to magnesium by FSW in lap configuration
Co-supervisor
 Mechanical engineering (Degree)
Universidade do Porto, Portugal
2022/01 - 2022/11 Failure analysis of a container of LPG
Supervisor
 Inspection engineering (Master)
Arak University, Iran
2020/09 - 2022/09 Aluminum matrix composite reinforced with Monel powder production by friction stir processing: Material characterization and mechanical properties
Supervisor
 Materials characterization and selection (Master)
Arak University, Iran
2019/09 - 2022/09 T-joining of aluminum to steel by friction stir welding
Supervisor
 Welding and Joining (Master)
Arak University, Iran
2019/09 - 2022/07 T-joining of aluminum to steel by weld-brazing technique: effect of filler material on the microstructure and joint quality
Supervisor
 Welding and joining (Master)
Arak University, Iran
2021/09/01 - 2022/02/01 Characterization of the aluminum-steel dissimilar joints produced by advanced hybrid joining technology.
Supervisor
Universidade do Porto Departamento de Engenharia Mecânica, Portugal
2019/09 - 2021/09 T-joining of aluminum to magnesium alloys by friction stir welding
Supervisor
 Welding engineering (Master)
Arak University, Iran
2018/09 - 2020/09 The effect of friction stir welding on formability of friction stir welded AA2024-AA7075 aluminum alloys during deep drawing
Co-supervisor
Arak University, Iran
2018/09 - 2020/09 Roll forming of friction stir welded aluminum-copper bimetallic material
Supervisor
Arak University, Iran
2017/09 - 2020/09 The effect of tool geometry on the joint quality between 2024 and 7075 aluminum alloys made by friction stir welding
Supervisor
Arak University, Iran
2017/09 - 2020/09 Hybrid TIG/FSW welding of AA1050-AA5083 aluminum alloys: micro structure and mechanical properties
Supervisor
Arak University, Iran
2017/09 - 2019/09 Effect of ultrasonic vibration during friction stir welding on the joint quality of AA6061-AA1050 aluminum alloys
Co-supervisor
Arak University, Iran
2017 - 2019 Comparison between weld-brazing and friction stir welding for joining of aluminum to steel
Supervisor
Arak University, Iran
2016/09 - 2018/09 Friction stir lap welding of aluminum to magnesium: effect of material configuration
Supervisor
Arak University, Iran
2015/09 - 2017/09 Friction stir welding of aluminum to copper using an aluminum run-on plate
Supervisor
Arak University, Iran
2014/09 - 2016/09 TIG welding of an Inconel super-alloy with various filler materials: Microstructure and mechanical properties
Supervisor
 Welding and Joining (Master)
Islamic Azad University, Iran

Conference scientific committee

Conference name Conference host
2024/05/09 - 2024/05/10 2nd International Conference on Engineering Manufacture 2024 (EM 2024) University of Porto
2023/10/19 - 2023/10/20 3rd International Conference on Advanced Joining Processes University of Porto
2022/07/07 - 2022/07/08 4th International Conference on Materials Design and Applications University of Porto
2022/05/05 - 2022/05/06 1st International Conference on Engineering Manufacture University of Porto
2021/10/21 - 2021/10/22 2nd International Conference on Advanced Joining Processes University of Porto
2018/02 - 2018/02 18th Conference on Welding and Non-destructive testing International and national conference on inspection and welding (IWNT)

Consulting

Activity description Institution / Organization
2014/07 - 2020/03 Consulting of the research and development section of the company producing bolts and screws. Active in material selection, forming and joining. Behin Foolad Company, Iran

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2021/04 - 2021/04 Online Course on Advanced Joining Processes Welding and Joining (Curso médio) Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2019 - 2021 Advanced Welding Metallurgy Welding and Joining (Master) Arak University, Iran
2017 - 2021 Advanced Welding Technologies Welding and joining (Master) Arak University, Iran
2016 - 2021 Characterization of Materials Materials Science and Metallurgy (Bachelor) Arak University, Iran
2016 - 2021 Advanced Materials Materials Science and Metallurgy (Bachelor) Arak University, Iran
2015 - 2021 Phase Transformations in Metals and Alloys (Master) Arak University, Iran
2015 - 2021 Physical Metallurgy Materials Science and Metallurgy (Bachelor) Arak University, Iran
2016 - 2017 Manufacturing Processes Mechanical Engineering (Bachelor) Arak University, Iran
2013 - 2015 Non-destructive Testing of Welded Joints Welding (Master) Islamic Azad University, Iran
2011 - 2012 Welding Technologies Materials Science and Engineering (Bachelor) Sharif University of Technology, Iran
2010 - 2012 Physical Metallurgy Materials Science and Engineering (Bachelor) Sharif University of Technology, Iran

Interview (tv / radio show)

Program Topic
2016/11 - Current A program about young researchers with great success and achievement. I presented my invention on development of novel procedure for production of aluminum-copper transition joints. As CEO of a startup company, we could attain the eligibility to become a scientific-based company.

Journal scientific committee

Journal title (ISSN) Publisher
2021 - Current Journal of Advanced Joining Processes (26663309) Elsevier
Distinctions

Other distinction

2007 Ranked as 1st at the national entrance exam for master graduation