???global.info.a_carregar???
Mariano Alvarez, graduated in Electronic Engineering at National Technological University - Cordoba regional faculty (UTN-FRC) and recived the Master's degree in Industrial Engineering - Electrotechnical branch, from the Polytechnic Institute of Bragança (IPB). Currently he is a researcher at the Research Centre in Digitalization and Intelligent Robotics (CeDRI). Working on the project STC 4.0 HP (New Generation of Stoneware Tableware in Ceramic 4.0 by High Pressure Casting Robot work cell). His main research focus is on control and automation.
Identification

Personal identification

Full name
Mariano Alvarez

Citation names

  • Alvarez, Mariano
  • Mariano J. Alvarez
  • Alvarez, Mariano J.
  • Alvarez, Mariano José

Author identifiers

Ciência ID
BC16-6ADC-AFC4
ORCID iD
0000-0001-8680-885X

Knowledge fields

  • Engineering and Technology - Electrotechnical Engineering, Electronics and Informatics - Automation and Control Systems
  • Engineering and Technology - Electrotechnical Engineering, Electronics and Informatics - Robotics and Automatic Control
  • Engineering and Technology - Electrotechnical Engineering, Electronics and Informatics - Electrical and Electronic Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Spanish; Castilian (Mother tongue)
English Upper intermediate (B2) Advanced (C1) Intermediate (B1) Intermediate (B1) Upper intermediate (B2)
Portuguese Upper intermediate (B2) Upper intermediate (B2) Intermediate (B1) Upper intermediate (B2) Intermediate (B1)
German Elementary (A2) Elementary (A2) Beginner (A1) Elementary (A2) Elementary (A2)
Education
Degree Classification
2022/06 - 2023/07
Concluded
Pós-Graduação em Investigação Aplicada (Pós-Graduação)
Instituto Politécnico de Bragança Escola Superior de Tecnologia e Gestão, Portugal
2021/02 - 2022/03
Concluded
Mestrado em Engenharia Industrial, Especialização em Engenheria Electrotécnica (Mestrado)
Major in Electrotécnia
Instituto Politécnico de Bragança Escola Superior de Tecnologia e Gestão, Portugal
"Prototyping and control of an automatic ceramic tableware finishing device" (THESIS/DISSERTATION)
16
2007/03 - 2019/12
Concluded
Ingenieria en electrónica (Licence)
Universidad Tecnológica Nacional Facultad Regional Córdoba, Argentina
"Amplificador de Audio Clase D " (THESIS/DISSERTATION)
16
2017/07 - 2017/11
Concluded
Curso maestral en energia solar (Curso de Especialização Tecnológica)
Curso maestral en energia solar, Argentina
2017/03
Concluded
Taller de energias renovables (Curso Técnico Superior Profissional)
ColectandoSol, Argentina
Affiliation

Science

Category
Host institution
Employer
2022/04 - Current Researcher (Research) Instituto Politécnico de Bragança Centro de Investigação em Digitalização e Robótica Inteligente, Portugal
Instituto Politécnico de Bragança Centro de Investigação em Digitalização e Robótica Inteligente, Portugal
2019/03 - 2019/11 Researcher (Research) CIII - Centro de investigación en informática para la ingeniería, Argentina
Projects

Grant

Designation Funders
2022 - 2023/06/30 STC 4.0 HP (New Generation of Stoneware Tableware in Ceramic 4.0 by High Pressure Casting Robot work cell) Project
BD.IPB/STC 4.0 HP
Research Fellow
Instituto Politécnico de Bragança Centro de Investigação em Digitalização e Robótica Inteligente, Portugal
Fundo Europeu de Desenvolvimento Regional (FEDER)
Concluded
Outputs

Publications

Book chapter
  1. Alvarez, Mariano; Brancalião, Laiany; Gomes, Diogo; Pinto, Vítor; Carneiro, Jorge; Santos, José; Coelho, João Paulo; Gonçalves, José. Corresponding author: Alvarez, Mariano. "Prototyping and Control of an Automatic Ceramic Tableware Finishing Device". In Lecture Notes in Electrical Engineering, 167-178. Springer International Publishing, 2022.
    10.1007/978-3-031-10047-5_15
  2. Alvarez, Mariano. "Automated Ceramics Tableware Finishing: A Laboratory Prototype for Concept Validation". In Proceedings TEEM 2022: Tenth International Conference on Technological Ecosystems for Enhancing Multiculturality. Salamanca, Spain: Springer, 2022.
    Accepted
Conference paper
  1. Alvarez, Mariano; Brancalião, L.. "Integration of an automated work cell for an industrial process". Paper presented in The Sixth Iberian Robotics Conference, Coimbra, 2023.
    Accepted
  2. Alvarez, Mariano; Brancaliao, L.. Corresponding author: Alvarez, Mariano. "Robustness increase of a ceramics finishing prototype: Towards meeting industry requisites". Paper presented in Technological Ecosystems for Enhancing Multiculturality TEEM 2023, Bragança, 2023.
    Accepted
  3. Alvarez, Mariano José; Brancalião, L.. Corresponding author: Alvarez, Mariano José. "Automated Ceramics Tableware Finishing: Non-Circular Geometries Case Study". Paper presented in IEEE International Conference on Emerging Technologies and Factory Automation ETFA 2023, Sinaia, 2023.
    Accepted
Journal article
  1. Gomes, Diogo; Alvarez, Mariano; Brancalião, Laiany; Carneiro, Jorge; Gonçalves, Gil; Costa, Paulo; Gonçalves, José; Pinto, Vítor H.. Corresponding author: Gomes, Diogo. "Data Analysis for Trajectory Generation for a Robot Manipulator Using Data from a 2D Industrial Laser". Machines 10 10 (2022): 907. http://dx.doi.org/10.3390/machines10100907.
    10.3390/machines10100907
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/06/29 The workshop presentations have the goal of disseminating the results of a research project that had as goal to introduce new methodologies and technologies in the traditional sector of Ceramics. The referred project aimed to establish the production conditions that will allow GRESTEL to worldwide launch a range of innovative products in fine stoneware tableware as a result of the combination of different Ceramics 4.0 technologies of the industrial value chain. STC 4.0 HP – New Generation of Stoneware Tableware in Ceramic 4.0 by High Pressure Casting Robot work cell
KIOS Research and Innovation Center of Excellence (Limassol, Cyprus)

Event participation

Activity description
Type of event
Event name
Institution / Organization
2023/06/26 - 2023/06/29 The 31st Mediterranean Conference on Control and Automation (MED2023) will be hosted at the Grand Resort in Limassol, Cyprus, from June 26 – 29, 2023. The conference will include tutorials and workshops, a technical program of presentations, and keynote lectures covering a wide range of topics on intelligent systems, control, automation, communication, optimization, robotics, etc.
Conference
The 31st Mediterranean Conference on Control and Automation (MED2023)
KIOS Research and Innovation Center of Excellence, Cyprus
2023/06 - 2023/06 MED 2023 offers workshops and tutorials addressing current and future topics in the areas of intelligent systems, control, and automation, delivered by experts from academia, research institutes, and the industry.
Workshop
STC 4.0 HP – New Generation of Stoneware Tableware in Ceramic 4.0 by High Pressure Casting Robot work cell
KIOS Research and Innovation Center of Excellence, Cyprus
2022/08/19 - 2022/11/21 The conference was held in Salamanca, Spain, on October 19-21, 2022 and organized by the Research GRoup in InterAction and eLearning (GRIAL) and Research Institute for Educational Science (IUCE) at the University of Salamanca.
Conference
10th International Conference on Technological Ecosystems for Enhancing Multiculturality
Instituto Universitario de Ciencias de la Educación, Spain
2022/07/08 - 2022/07/09 Present the paper entitled “Prototyping and Control of an Automatic Ceramic Tableware Finishing Device” in the 15th APCA International Conference on Automatic Control and Soft Computing (Controlo 2022) held in Caparica / Lisbon, Portugal, which took place from the 6th to the 8th of July 2022.
Conference
15th APCA International Conference on Automatic Control and Soft Computing
Associação Portuguesa do Controlo Automático, Portugal
2014/07/19 - 2014/07/26 Advanced Digital Design using Synopsys Synthesis Tools
Congress
EAMTA 2014
EAMTA - Escuela Argentina de Micro-Nanoelectrónica, Tecnologías y Aplicaciones, Argentina