???global.info.a_carregar???
Tiago Santos is a Researcher at the Centre for Rapid and Sustainable Product Development (CDRSP) at the Polytechnic Institute of Leiria, PT. CDRSP is dedicated either to biomedical applications and tissue regeneration, and to the transformation of the manufacturing industry through the development and implementation of novel Additive Manufacturing (AM) technologies. He completed his PhD in Physics Engineering in 2020 from the University of Aveiro Department of Physics, Master in Physics Engineering in 2008 from the University of Aveiro Department of Physics. His PhD is entitled "Método alternativo baseado em radiação de micro-ondas para processamento térmico de materiais" (Alternative method based on microwave radiation for thermal processing of materials). He has published several articles in specialized peer-reviewed journals, published 2 book chapters, has 3 registered patent(s), participated as a Research Fellow in 4 scientific and industrial projects, in 2 short-term postdoc projects, and as a Junior Researcher in 1 project. He has co-supervision of the graduation project entitled "Imagiologia de fenómenos térmicos com câmara de infravermelhos" (Imaging of thermal phenomena with infrared camera). He participated in the research project "Facing the challenges of characterizing novel thermal materials and processes (Heat@UA)", having carried out modeling and computational simulation of fluidic, magnetic, and thermal processes and systems. The simulation results were complemented with those obtained by the analysis of thermal processes, using infrared thermography. Within the scope of the SGH - SMART GREEN HOMES project, reference SGH/CICECO-UA/139-02/2017, n.º7678, skills were acquired in magnetic heat pumps, more specifically in the area of simulation using the COMSOL Multiphysics software. He carried out complementary work on thermal characterization of materials with thermomagnetic properties. His main research activity and interests focus mostly on microwave processing of materials, with emphasis on clay-based ceramics like porcelain and stoneware. He had participated as a research fellow in two industrial projects (Greenwave and CerWave research projects) aiming at the construction of a microwave hybrid furnace for porcelain firing. He was responsible for several tasks, including simulation studies and construction of a laboratory microwave furnace for porcelain firing; cooperation in the development of a tunnel industrial kiln (that uses a hybrid firing system (gas + microwave)) for porcelain firing. Among other tasks, he was responsible for the optimization of the tunnel kiln control automaton system and firing tests. Regarding the application of microwave heating technology in materials processing, his interests are currently synchronized with the field of microwave sintering of bioceramics for bone tissue regeneration. Currently, his interests are mainly focused on numerical simulation and modeling of electrospinning processes for scaffolding/biophysical applications.
Read full resume ↓
Identification

Personal identification

Full name
Tiago André César dos Santos

Citation names

  • T. Santos
  • Tiago Santos

Author identifiers

Ciência ID
BC16-20FE-1A71
ORCID iD
0000-0002-6748-5589
Google Scholar ID
https://scholar.google.com.hk/citations?view_op=list_works&hl=pt-PT&user=CWM1EXwAAAAJ
Researcher Id
JRX-2230-2023
Scopus Author Id
57224690752

Email addresses

  • tiago.a.santos@ipleiria.pt (Professional)

Knowledge fields

  • Engineering and Technology - Materials Engineering - Ceramics
  • Exact Sciences - Physical Sciences - Chemical Physics
  • Engineering and Technology - Chemical Engineering - Chemical Process Engineering
  • Engineering and Technology - Mechanical Engineering - Thermodynamics
  • Natural sciences - Earth and Environmental Sciences - Mineralogy
  • Medical and Health Sciences - Medical Biotechnology - Biomaterials

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Advanced (C1) Proficiency (C2) Upper intermediate (B2) Advanced (C1)
French Beginner (A1) Beginner (A1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2020/10/01 - 2021/03/31
Concluded
 MATIS - Materiais e Tecnologias Industriais Sustentáveis (CENTRO-01-0145-FEDER-000014) (Pós-doutoramento)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2020/03/01 - 2020/09/30
Concluded
 Project SGH - SMART GREEN HOMES; reference SGH/CICECO-UA/137B-02/2019, n.º7678 (Pós-doutoramento)
Universidade de Aveiro CICECO, Portugal
2011/11/06 - 2020/01/16
Concluded
 Physics Engineering (Doutoramento)
Major in Microwave materials processing
Universidade de Aveiro Departamento de Física, Portugal
"Método alternativo baseado em radiação de micro-ondas para processamento térmico de materiais / Alternative method based on microwave radiation for thermal processing of materials" (THESIS/DISSERTATION)
2007/09/25 - 2008/12/18
Concluded
 Physics Engineering (Mestrado)
Universidade de Aveiro Departamento de Física, Portugal
"Robô autónomo para extinção de incêndios em edifícios" (THESIS/DISSERTATION)
 14
2001/09/24 - 2008/09/01
Concluded
 Physics Engineering (Licenciatura)
Universidade de Aveiro Departamento de Física, Portugal
"Sistema de navegação autónoma de robôs miniatura para execução de tarefas" (THESIS/DISSERTATION)
 12
Affiliation

Science

Category
Host institution 		Employer
2021/04/01 - Current Contracted Researcher (Research) Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2020/10/01 - 2021/03/31 Postdoc (Research) Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2018/04/09 - 2020/09/30 Postdoc (Research) Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro CICECO, Portugal
(...)

Others

Category
Host institution 		Employer
2016/05/09 - 2018/04/08 Engineer under the CerWave project - Demonstration of porcelain gas-microwave sintering process, nº6410 Porcelanas da Costa Verde S.A., Portugal
Porcelanas da Costa Verde S.A., Portugal
2011/07/01 - 2013/03/31 Engineer functions within the scope of the Greenwave project's continuation work Induzir - Indústria e Comércio de Equipamentos, Lda., Portugal
2009/03/01 - 2011/06/30 Research under the scope of the Greenwave project Universidade de Aveiro Departamento de Física, Portugal
Universidade de Aveiro Departamento de Física, Portugal
2000/08/01 - 2000/10/31 Professional internship (High-school associated) The Navigator Company, Portugal
Complexo Industrial de Cacia, Portugal
Projects

Grant

Designation Funders
2020/10/01 - 2021/03/31 MATIS - Materiais e Tecnologias Industriais Sustentáveis (CENTRO-01-0145-FEDER-000014)
CENTRO-01-0145-FEDER-000014
Post-doc Fellow
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2020/03/01 - 2020/09/30 SGH - SMART GREEN HOMES - Project Nº 7678
BPD - SGH/CICECO-UA/137B-02/2019
Post-doc Fellow
Universidade de Aveiro CICECO, Portugal
Concluded
2018/04/09 - 2019/12/15 SGH - SMART GREEN HOMES - Project Nº 7678
BI(M) - SGH/CICECO-UA/139-02/2017
Research Fellow
Concluded
2013/06/25 - 2015/12/15 Facing the challenges of characterizing novel thermal materials and processes (Heat@UA)
info:eu-repo/grantAgreement/FCT/COMPETE/128712/PT
Research Fellow
Universidade de Aveiro CICECO, Portugal
Concluded
2009/03/01 - 2011/06/30 Greenwave - Sinterização assistida por micro-ondas de porcelana / Microwave-assisted firing of porcelain, nº 3410
Greenwave nº3410
Research Fellow
Universidade de Aveiro Departamento de Física, Portugal
Concluded

Contract

Designation Funders
2021/02/01 - 2024/01/31 Demagnetizing-based magnetocaloric refrigeration
PTDC/EME-TED/3099/2020
10.54499/PTDC/EME-TED/3099/2020
Other
Universidade do Porto Instituto de Física dos Materiais-Instituto de Nanociência e Nanotecnologia, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2021/04/01 - 2022/07/31 FCT Stimuli2BioScaffold (PTDC/EME-SIS/32554/2017) - Stimuli optimization for BioScaffolds: from numerical modelling to in vitro tests
PTDC/EME-SIS/32554/2017
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Ongoing
2021/10/01 - 2021/12/09 SoftAware: International Cooperation in the Field of Higher Education for Developing Software Talents
2019-1-BG01-KA203-062553
project team member
Agence Europe SA, Belgium
Concluded
2016/05/09 - 2018/04/08 CerWave - Demonstração do processo de cozedura de porcelana por gás & micro-ondas / Demonstration of porcelain gas-microwave sintering process
POCI-01-0247-FEDER-006410
Researcher
Porcelanas da Costa Verde S.A., Portugal
Concluded
Outputs

Publications

Book chapter
  1. T. Santos; Devesa, S.; V. A. F. Costa; L. C. Costa. "Permittivity Measurements of Ceramic Materials for Using and Firing in Microwave Furnaces". In An Introduction to Permittivity, edited by Parveen Saini, 77-109. Nova Science Publishers (NOVA), 2022.
    Published
  2. Santos, Tiago; Henry, François; Costa, Luís C.. "Microwave Radiation: Applications in Metrology and Materials Synthesis". In Proceedings of the Sixth International Symposium on Dielectric Materials and Applications (ISyDMA’6), 19-29. Springer International Publishing, 2022.
    Published • 10.1007/978-3-031-11397-0_2
Conference abstract
  1. T. Santos; J. S. Amaral; V. S. Amaral; V. A. F. Costa. "Thermal Anisotropy of Natural Cork". Paper presented in CSA2023 - Book of Abstracts: Cork in Science and Applications Conference, Espinho, 2023.
    Published
  2. Santos, Tiago; Ramani, Melinda; Devesa, Susana; Batista, Catarina; Franco, Margarida; Duarte, Isabel; Costa, Luís; et al. "Additive Manufactured Stoneware Fired in Microwave Furnace". Paper presented in Materiais 2022, Marinha Grande, 2022.
    Published • 10.3390/materproc2022008145
Conference paper
  1. T. Santos; J. S. Amaral; V. S. Amaral; V. A. F. Costa. "Thermal Anisotropy of Natural Cork". Paper presented in CSA2023 – Cork in Science and Applications, Espinho, 2023.
    Published
  2. T. Santos; N. F. Santos; C. S. F. Gomes; L. Hennetier; V. A. F. Costa; L. C. Costa. "Features of utilitarian stoneware fired with microwave radiation". Paper presented in AMPERE 2019, Valência, 2019.
    Published • 10.4995/ampere2019.2019.9913
  3. T. Santos; V. A. F. Costa; L. C. Costa. "Ovalization and other porcelain flaws when fired using microwave technology". Paper presented in 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials/11th National Congress on Experimental Mechanics, Porto, 2018.
    Published
  4. T. Santos; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Thermal Conductivity of Agglomerate Cork". 2017.
    Published • 10.21741/9781945291418-1
  5. C. V. X. Bessa; L. D. R. Ferreira; S. Gama; T. Santos; J. S. Amaral; V. A. F. Costa; V. S. Amaral; O. Horikawa. "Optimization of heat exchange in magnetic refrigerators and thermomagnetic motors". Paper presented in 7th International Conference on Magnetic Refrigeration at Room Temperature (Thermag VII), Turin, 2016.
    Published
  6. T. Santos; L. Hennetier; V. A. F. Costa; L. C. Costa. "Using microwave radiation for porcelain tableware sintering". Paper presented in Progress In Electromagnetics Research Symposium Proceedings, Praga, 2015.
    Published
  7. C. S. Ferreira; M. P. F. Graca; T. Santos; L. C. Costa. "Microwave dielectric properties of BiNbO4 ceramics". Paper presented in Progress In Electromagnetics Research Symposium Proceedings, Praga, 2015.
    Published
  8. Monteiro, J.; Valente, M. A.; T. Santos; Costa, L. C.; Sousa, J.. "Microwave radiation: An alternative method to sinter utilitarian porcelain". Paper presented in IMOC 2011, Natal, 2011.
    Published • 10.1109/imoc.2011.6169259
  9. Monteiro, J.; Costa, L. C.; Valente, M. A.; T. Santos; Sousa, J.. "Simulating the electromagnetic field in microwave ovens". Paper presented in IMOC 2011, Natal, 2011.
    Published • 10.1109/imoc.2011.6169274
  10. T. Santos; L. C. Costa; M. A. Valente; J. Monteiro; J. Sousa. "3D electromagnetic field simulation in microwave ovens: a tool to control thermal runaway". Paris, 2010.
    Published
Conference poster
  1. T. Santos; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Thermal properties of porcelain during its manufacturing". Paper presented in Jornadas do CICECO 2019, 2019.
  2. A. P. Lopes; T. Santos; D. J. Silva; C. M. Roque; V. S. Amaral; V. A. Costa; J. S. Amaral. "Interactive modelling of non-conventional thermal processes using COMSOL Multiphysics and Matlab LiveLink". Paper presented in Jornadas do CICECO 2019, 2019.
  3. T. Santos; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Thermal Conductivity of Agglomerate Cork". Paper presented in Jornadas do CICECO 2018, 2018.
  4. A. P. Lopes; T. Santos; D. J. Silva; V. S. Amaral; V. A. F. Costa; J. S. Amaral. "Improving speed and flexibility of COMSOL simulations". Paper presented in Jornadas CICECO 2018, 2018.
  5. T. Santos; D. Furtado; J. Marinheiro; F. Proença; L. C. Costa. "CerWave - Microwave/gas oven Project to fire industrial porcelain". Paper presented in Materiais 2017, XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International Symposium on Materials, 2017.
  6. T. Santos; D. Furtado; J. Marinheiro; F. Proença; L. C. Costa. "CerWave - Demonstração do processo de cozedura de porcelana por gás-micro-ondas". Paper presented in Green Business week, 2017.
  7. T. Santos; L. Hennetier; V. A. F. Costa; L. C. Costa. "Using microwave radiation for porcelain tableware sintering". Paper presented in PIERS - Progress In Electromagnetics Research Symposium Proceedings, 2015.
  8. T. Santos; L. Hennetier; V. A. F. Costa; L. C. Costa. "Using microwave radiation to process materials". Paper presented in 1st Doctoral Congress in Engineering, 2015.
  9. T. Santos; C. V. X. Bessa; S. Gama; L. D. R. Ferreira; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Infrared and simulation studies on emulated thermomagnetic motor heat exchangers". Paper presented in Jornadas do CICECO 2015, 2015.
  10. T. Santos; R. Niemann; A. Waske; J. S. Amaral; V. S. Amaral; V. A. F. Costa. "Infrared microscopy: challenges in the study of magnetocaloric materials". Paper presented in Jornadas do CICECO 2015, 2015.
  11. T. Santos; J. Pino; V. A. F. Costa; J. S. Amaral; V. S. Amaral. "Infrared thermography of Materials and Processes". Paper presented in Jornadas do CICECO 2015, 2015.
  12. T. Santos; L. C. Costa; L. Hennetier; V. A. F. Costa; M. A. Valente; J. Monteiro; J. Sousa. "Modelization and development of microwave sintering cavities". Paper presented in V annual meeting I3N, 2015.
  13. T. Santos; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Infrared microscopy at the HEAT@UA lab". Paper presented in 4th Joint Congress "Microscopy at the Frontiers of Science", 2015.
  14. T. Santos; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Desenho e optimização de um refrigerador magnético". Paper presented in 19 conferência nacional de Física e 24º encontro Ibérico para o ensino da Física, 2014.
  15. T. Santos; L. Ferreira; L. C. Gomes; J. S. Amaral; V. A. F. Costa; V. S. Amaral. "Thermal imaging with infra-red camera". Paper presented in Research Day of Aveiro University, 2014.
  16. T. Santos; M. A. Valente; J. Monteiro; J. Sousa; L. C. Costa. "Simulação do campo electromagnético em fornos de microondas". Paper presented in 18ª conferência nacional de Física – CNF, 2012.
  17. T. Santos; J. Monteiro; L. C. Costa; M. A. Valente; J. Sousa. "Multi magnetron microwave oven to process utilitarian porcelain". Paper presented in I3N 2012 Conference, 2012.
  18. T. Santos; L. C. Costa; M. A. Valente; J. Monteiro; J. Sousa. "Microwave sintering of utilitarian porcelain". Paper presented in IV CLECV - Congresso Luso-Espanhol de Cerâmica e Vidro, 2011.
  19. J. Monteiro; M. A. Valente; T. Santos; L. C. Costa; J. Sousa. "Microwave radiation: an alternative method to sinter utilitarian porcelain". Paper presented in International Microwave and Optoelectronics Conference (IMOC), 2011.
  20. J. Monteiro; L. C. Costa; M. A. Valente; T. Santos; J. Sousa. "Simulating the electromagnetic field in microwave ovens". Paper presented in International Microwave and Optoelectronics Conference (IMOC), 2011.
  21. T. Santos; L. C. Costa; M. A. Valente; J. Monteiro; J. Sousa. "Electromagnetic field simulation in microwave cavities". Paper presented in I3N Conference, 2011.
  22. T. Santos; L. C. Costa; M. A. Valente; J. Monteiro; J. Sousa. "3D electromagnetic field simulation in microwave ovens: a tool to control thermal runaway". Paper presented in COMSOL Conference, 2010.
Journal article
  1. Santos, Tiago; Belbut, Miguel; Amaral, João; Amaral, Vitor; Ferreira, Nelson; Alves, Nuno; Pascoal-Faria, Paula. "Insights into Temperature Simulation and Validation of Fused Deposition Modeling Processes". Journal of Manufacturing and Materials Processing 7 6 (2023): 189. http://dx.doi.org/10.3390/jmmp7060189.
    10.3390/jmmp7060189
  2. Santos, Tiago; Ramani, Melinda; Devesa, Susana; Batista, Catarina; Franco, Margarida; Duarte, Isabel; Costa, Luís; et al. "A 3D-Printed Ceramics Innovative Firing Technique: A Numerical and Experimental Study". Materials 16 18 (2023): 6236. http://dx.doi.org/10.3390/ma16186236.
    Open access • 10.3390/ma16186236
  3. Maria J Pereira; Tiago Santos; Rafael Correia; João S Amaral; Vitor S Amaral; Simone Fabbrici; Franca Albertini. "Mapping the magnetocaloric effect at the microscale on a ferromagnetic shape memory alloy with infrared thermography". Journal of Physics: Materials 6 (2023): 024002.
    Open access • Published • 10.1088/2515-7639/acc13b
  4. Santos, Tiago A. C.; Costa, Vítor A. F.; Costa, Luís M. C. M.. "Microstructure analysis of microwave and conventionally fired porcelain". Fire and Materials 47 3 (2022): 375-385. http://dx.doi.org/10.1002/fam.3103.
    Published • 10.1002/fam.3103
  5. Santos, T.; Gomes, C.S.F.; Santos, N.F.; Costa, V.A.F.; Costa, L.C.. "Global insight into microwave stoneware firing: Crystallochemical transformations". Ceramics International 48 15 (2022): 21492-21501. http://dx.doi.org/10.1016/j.ceramint.2022.04.117.
    Published • 10.1016/j.ceramint.2022.04.117
  6. Santos, T.; Hennetier, L.; Costa, V.A.F.; Costa, L.C.. "Microwave versus conventional porcelain firing: Colour analysis". Materials Chemistry and Physics 275 (2022): 125265. http://dx.doi.org/10.1016/j.matchemphys.2021.125265.
    Published • 10.1016/j.matchemphys.2021.125265
  7. Pereira, Maria J.; Santos, Tiago; Correia, Rafael; Amaral, João S.; Amaral, Vitor S.; Fabbrici, Simone; Albertini, Franca. "Direct measurement and imaging of magnetocaloric effect inhomogeneities at the microscale in Ni44Co6Mn30Ga20 with infrared thermography". Journal of Magnetism and Magnetic Materials 538 (2021): 168283. http://dx.doi.org/10.1016/j.jmmm.2021.168283.
    10.1016/j.jmmm.2021.168283
  8. Santos, T.; Gomes, C. S. F.; Costa, V. A. F.; Costa, L. C.. "Microwave Versus Conventional Porcelain Firing: Greenware to Biscuit Crystallochemical Transformations". Journal of Manufacturing Science and Engineering 143 12 (2021): http://dx.doi.org/10.1115/1.4051130.
    10.1115/1.4051130
  9. Santos, Tiago; Gomes, Celso S. F.; Hennetier, Luc; Costa, Vítor A. F.; Costa, Luís C.. "Global insight into microwave stoneware firing: Macro and microstructural changes". International Journal of Applied Ceramic Technology 18 5 (2021): 1801-1813. http://dx.doi.org/10.1111/ijac.13736.
    Published • 10.1111/ijac.13736
  10. Santos, Tiago; Hennetier, Luc; Costa, Vítor A. F.; Costa, Luis C.. "Microwave vs conventional porcelain firing: Macroscopic properties". International Journal of Applied Ceramic Technology 17 5 (2020): 2277-2285. http://dx.doi.org/10.1111/ijac.13569.
    10.1111/ijac.13569
  11. Marques, A. C.; Miglietta, Davide; Gaspar, G.; Baptista, A. C.; Gaspar, A.; Perdigão, P.; Soares, I.; et al. "Synthesis of thermoelectric magnesium-silicide pastes for 3D printing, electrospinning and low-pressure spray". Materials for Renewable and Sustainable Energy 8 4 (2019): http://dx.doi.org/10.1007/s40243-019-0159-7.
    10.1007/s40243-019-0159-7
  12. T. Santos; Hennetier, L.; Costa, V.A.F.; Costa, L.C.. "Microwave versus conventional porcelain firing: Temperature measurement". Journal of Manufacturing Processes 41 (2019): 92-100. http://dx.doi.org/10.1016/j.jmapro.2019.03.038.
    Published • 10.1016/j.jmapro.2019.03.038
  13. Soares dos Santos, Marco P.; Marote, Ana; T. Santos; Torrão, João; Ramos, A.; Simões, José A. O.; da Cruz e Silva, Odete A. B.; et al. "New cosurface capacitive stimulators for the development of active osseointegrative implantable devices". Scientific Reports 6 1 (2016): 1-15. http://dx.doi.org/10.1038/srep30231.
    Published • 10.1038/srep30231
  14. Pereira, Daniel; T. Santos; Nogueira, Rogério; Costa, Luís C.; Alberto, Nélia. "High temperatures (>1000 °C) monitoring during the sintering process in microwave oven using RFBGs". Optical and Quantum Electronics 48 5 (2016): 1-9. http://dx.doi.org/10.1007/s11082-016-0573-3.
    Published • 10.1007/s11082-016-0573-3
  15. Santos, N. F.; Holz, T.; T. Santos; Fernandes, A. J. S.; Vasconcelos, T. L.; Gouvea, C. P.; Archanjo, B. S.; et al. "Heat Dissipation Interfaces Based on Vertically Aligned Diamond/Graphite Nanoplatelets". ACS Applied Materials & Interfaces 7 44 (2015): 24772-24777. http://dx.doi.org/10.1021/acsami.5b07633.
    10.1021/acsami.5b07633
  16. T. Santos; Costa, L.C.; Hennetier, L.; Valente, M.A.; Monteiro, J.; Sousa, J.. "Microwave processing of porcelain tableware using a multiple generator configuration". Applied Thermal Engineering 50 1 (2013): 677-682. http://dx.doi.org/10.1016/j.applthermaleng.2012.07.010.
    10.1016/j.applthermaleng.2012.07.010
  17. T. Santos; Valente, M.A.; Monteiro, J.; Sousa, J.; Costa, L.C.. "Electromagnetic and thermal history during microwave heating". Applied Thermal Engineering 31 16 (2011): 3255-3261. http://dx.doi.org/10.1016/j.applthermaleng.2011.06.006.
    10.1016/j.applthermaleng.2011.06.006
Magazine article
  1. Luc Hennetier; Vítor Costa; Luís Manuel Cadillon Martins Costa. "Microwave versus conventional porcelain firing: the effect on the colour", Research@ua, 2022
Newsletter article
  1. Alves, Nuno; M. Belbut; Pascoal-Faria, Paula; J. Fatelo; P. Ferreira; T. Santos; Martins-Ferreira, Nelson. "A multi-link finite-element modellation of heat conduction", Scripta-Ingenia, 2022
Thesis / Dissertation
  1. Santos, Tiago. "Método alternativo baseado em radiação de micro-ondas para processamento térmico de materiais / Alternative method based on microwave radiation for thermal processing of materials". PhD, Universidade de Aveiro Departamento de Física, 2020.
  2. Santos, Tiago. "Robô autónomo para extinção de incêndios em edifícios". Master, Universidade de Aveiro Departamento de Física, 2008.
  3. Santos, Tiago. "Sistema de navegação autónoma de robôs miniatura para execução de tarefas". Degree, Universidade de Aveiro Departamento de Física, 2008.

Intellectual property

Patent
  1. T. Santos; Santos, Mario; Silva, Estelina; Eliana do Carmo Lima Correia; José Claudino de Pinho Cardoso. 2022. "Combustão e Pirólise de Biomassa Assistida por Radiação Eletromagnética". Portugal.
    Granted/Issued
  2. T. Santos; Mário Jorge César dos Santos; Silva, Estelina; João Pedro Pinto; Marco Molinari; YANG, TAO. 2019. "Reduction of toxic gases through catalysis effects of tobacco burning". China.
    Pending
  3. Gil César dos Santos; Carla Maria Batista Gonçalves; Santos, Tiago. 2019. "Método de detecção, localização e eliminação de espécies invasoras não endémicas". Portugal.
    Granted/Issued
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/09/08 Thermal Anisotropy of Natural Cork CSA2023 – Cork in Science and Applications
TEMA (Espinho, Portugal)
2023/07/19 Case studies of droplet formation in incompressible Newtonian fluids: water example PRISM Technological University of the Shannon: Midlands and CDRSP Polytechnic of Leiria - Joint Research Symposium
TUS - Technological University of the Shannon ( Athlone, Ireland)
2022/04/11 Additive Manufactured Stoneware Fired in Microwave Furnace Materiais 2022
CDRSP - Centro para o Desenvolvimento Rápido e Sustentável do Produto, Politécnico de Leiria, Portugal (Marinha Grande, Portugal)
2021/12/09 SoftAware Soft Skills Toolkit Software conference "Creating Talent in Software Engineering"
CDRSP - Centro para o Desenvolvimento Rápido e Sustentável do Produto, Politécnico de Leiria, Portugal (Marinha Grande, Portugal)
2021/05/22 3D printed ceramics innovative firing technique International Conference on Direct Digital Manufacturing and Polymers ICDDMAP 2021
CDRSP - Centro para o Desenvolvimento Rápido e Sustentável do Produto, Politécnico de Leiria, Portugal (Marinha Grande, Portugal)
2021/05/22 Temperature simulation and validation of FDM processes International Conference on Direct Digital Manufacturing and Polymers ICDDMAP 2021
CDRSP - Centro para o Desenvolvimento Rápido e Sustentável do Produto, Politécnico de Leiria, Portugal (Marinha Grande, Portugal)
2021/01/07 Thermal mechanisms of 3D printing International Manufacturing Forum Series (IMFS) - The Universal Printer
Centro para o Desenvolvimento Rápido e Sustentado do Produto (CDRsp) (Marinha Grande, Portugal)
2020/12/07 Direct measurement and imaging of magnetocaloric effect inhomogeneities at the microscale in Ni44Co6Mn30Ga20 with infrared thermography JEMS 2020 – Joint European Magnetic Symposia
(Lisbon)
2020/01/23 Microwave Porcelain Firing: Material properties TEchMA2020 – 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
Mechanical Department of the University of Aveiro (Aveiro, Portugal)
2019/09/10 Features of microwave fired utilitarian stoneware Ampere 2019 - 17th International Conference on Microwave and High Frequency Heating
Science Park of the Universitat Politècnica de València (Valência, Spain)
2018/11/05 Ovalization and other porcelain flaws when fired using microwave technology 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials/11th National Congress on Experimental Mechanics
Hotel Vila-Galé (Porto, Portugal)
2017/06/08 Porcelain sintering using microwave radiation 2nd Doctoral Congress in Engineering
FEUP (Porto, Portugal)
2017/04/10 Macro and microstructure properties of microwave fired porcelain Materiais 2017, XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International Symposium on Materials
University of Aveiro (Aveiro, Portugal)
2015/09/11 Infrared Thermography Microscopy at the Heat@ua Lab mfs2015 – microscopy at the frontiers of science, 4th joint congress of the Portuguese and Spanish microscopy science
FEUP (Porto, Portugal)
2014/09/03 Imagiologia de infra-vermelhos: do betão à nanotecnologia 19 conferência nacional de Física e 24º encontro Ibérico para o ensino da Física
Instituto superior Técnico (Lisboa, Portugal)
2014/09/03 Avaliação da performance térmica de materiais: Hot Disk 19 conferência nacional de Física e 24º encontro Ibérico para o ensino da Física
Instituto superior Técnico (Lisboa, Portugal)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2015 - 2015/07/21 Imagiologia de fenómenos térmicos com câmara de infravermelhos
Co-supervisor
 Physics Engineering (Degree)
Universidade de Aveiro Departamento de Física, Portugal

Universidade de Aveiro CICECO, Portugal

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2016/12/07 - 2016/12/07 "Termografia de infravermelhos ao serviço da indústria de moldes e plásticos" - Presentation and discussion on the potential of using thermographic methods in the diagnosis of equipment, processes and products in the molds and plastics industry, a lecture open to the general public, with particular focus on the industrial sector.
Workshop
 Ciclo de Jornadas Técnicas - A indústria de Moldes e Plásticos em debate: "Termografia de infravermelhos ao serviço da indústria de moldes e plásticos"
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2015 - 2016 Laboratórios de Elementos de Física Physics Engineering (Licenciatura) Universidade de Aveiro Departamento de Física, Portugal
2014 - 2015 Laboratórios de Elementos de Física (Licenciatura) Universidade de Aveiro Departamento de Física, Portugal
2014 - 2015 Laboratórios de Física Quântica Physics Engineering (Licenciatura) Universidade de Aveiro Departamento de Física, Portugal
2013 - 2014 Laboratórios de Elementos de Física (Licenciatura) Universidade de Aveiro Departamento de Física, Portugal
2013 - 2014 Laboratórios de Mecânica (Licenciatura) Universidade de Aveiro Departamento de Física, Portugal

Interview (newspaper / magazine)

Activity description Newspaper / Forum
2014/06/04 In the context of the research day 2014, a demonstration was made, to the scientific community and to the community in general, showing the potential of the infrared camera in the analysis and observation of thermal phenomena. Jornal de Noticias
Distinctions

Award

2011 Investigação e desenvolvimento em gestão do desporto Prof. Albino Maria
Instituto Politécnico de Santarém Escola Superior de Desporto de Rio Maior, Portugal