???global.info.a_carregar???
Ana Sofia Figueira Ramos is Assistant Professor at the Department of Mechanical Engineering (DEM) of the Faculty of Sciences and Technology of the University of Coimbra (FCTUC), since September 2019. She belongs to the Centre for Mechanical Engineering, Materials and Processes - CEMMPRE (ex CEMUC). Since April 2022 intregrates CEMMPRE board as vice-coordinator. A.S. Ramos completed her 5 year degree in Chemical Engineering by the University of Coimbra (UC) in 1994. In 1997 she finished the MSc in Materials Engineering and in 2002 she completed a PhD in Mechanical Engineering with full honour (MSc and PhD FCT studentship). Later, she received a Post-Doc grant. From June 2008 to May 2013 she was Auxiliary Researcher (Ciência 2007) at the Centre for Mechanical Engineering of UC (CEMUC). From June 2013 to September 2015 A.S. Ramos was Auxiliary Researcher under the project "MT4MOBI - Materials and Technologies for Greener Manufacturing & Products Applied to Mobility". From October 2015 to December 2018 she was FCT Post-doc fellow. From September 2017 to December 2018 she was also Invited Assistant Professor. Between January and September 2019 she was Researcher at DEM-FCTUC. A.S. Ramos participated in several R&D projects, e.g.: PTDC/EME/TME/100990/2008 (Microbond), PTDC/CTM/69645/2006 (Nanobrazing), POCTI/CTM/55970/2004, ALMOULD G5ST-CT-2001-00403 (European Project), PRAXIS XXI 3/3.1/CTAE/1904/95. After approval-funded she conducted experiments at renowned synchrotron facilities (ESRF - European Synchrotron Research Facilities and DESY - Deutsch Electron Synchrotron). She was Principal Investigator of Project "CrackFree - Towards self-repairing metallic materials" - PTDC/CTM-CTM/29101/2017 (2018-2021). She was also the responsible at UC of the Project "NanoTiC - Nanojoining of Titanium to Ceramics" - PTDC/CTM-CTM/31579/2017 (2018-2021) leaded by the University of Porto. Currently she participates in three Mobilizing Agendas for Business Innovation within the scope of the PRR - Portuguese Recovery and Resilience Facility (DRIVOLUTION/ AM2R/ INOV.AM), being responsible at UC for two Workpackges and co-responsible for a Workpage. A.S. Ramos edited 1 book and published 1 book chapter, 76 papers in international peer-review journals, 3 in national journals and 12 in conf. proceedings with refereeing. 69 papers were published in ISI journals, most belonging to top quartile (h index=22, Scopus). A.S. Ramos reviews papers on a regular basis (https://www.webofscience.com/wos/author/record/K-8450-2012) and has been recognized as Elsevier Reviewer. A.S. Ramos is Editorial Board Member of the MDPI journal Coatings. She was Guest Editor of "Intermetallics 2016" special issue of Metals open access journal, and currently she guest edits the "Nanoscale Multilayer Thin Films/Foils" special issue of the open access journal Coatings. AS. Ramos attended 47 International Conferences (33 oral communications from which 4 were invited, 10 posters). In September 2016 she gave a keynote lecture at PSE 2016 - 15th International Conference on Plasma Surface Engineering. She was invited to WEDB - Symposium of World Experts in Diffusion Bonding, and opened it with the oral presentation "Reaction-assisted diffusion bonding of dissimilar materials" (UK, June 2017). As co-author she has 46 oral communications and 22 posters. She was on the organizing committee of Materiais 2013 - XVI Conference of Sociedade Portuguesa dos Materiais, VII International Materials Symposium and of the International Conference Junior Euromat 2022. She is member of International Institute of Welding (IIW) Commission XVII (Brazing, Soldering and Diffusion Bonding), Commission VII (Nano and Microjoining) and European Community Joining Sub-Platform. She completed the (co)supervision of 19 MSc theses, one of which the student won the 1st prize of the 2009 contest of the Portuguese Materials Society. She supervised a PhD student and participated as Jury of 8 PhD academic degrees.
Identification

Personal identification

Full name
Ana Sofia Figueira Ramos

Citation names

  • A.S. Ramos
  • S. Ramos
  • Ramos, Ana Sofia

Author identifiers

Ciência ID
BB12-8051-02F2
ORCID iD
0000-0002-8486-5436
Researcher Id
K-8450-2012
Scopus Author Id
7401770170

Addresses

  • Faculdade de Ciências e Tecnologia da Universidade de Coimbra. R. Luís Reis Santos, Dep. Eng. Mecânica, Polo II Universidade de Coimbra, 3030-788, Coimbra, Coimbra, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Materials Engineering
  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering
  • Engineering and Technology - Materials Engineering - Coating and Films

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Proficiency (C2) Advanced (C1) Advanced (C1) Advanced (C1)
French Intermediate (B1) Advanced (C1) Beginner (A1) Advanced (C1)
Portuguese (Mother tongue)
Spanish; Castilian Upper intermediate (B2) Upper intermediate (B2)
Italian Beginner (A1) Beginner (A1)
Education
Degree Classification
2002/05/27
Concluded
Mechanical Engineering (Doutoramento)
Major in Materials Science
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Comportamento Mecânico e Químico do Sistema Ti-Al-(M)" (THESIS/DISSERTATION)
Summa cum laude
1997/03/25
Concluded
National Master in Materials Engineering (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Produção e Caracterização de Revestimentos Multicamada de Cerâmica/Metal" (THESIS/DISSERTATION)
Very Good
1994/07/13
Concluded
Chemical Engineering (Licenciatura)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Good (15/20, the best grade of that year)
Affiliation

Science

Category
Host institution
Employer
2019/01/02 - 2019/08/31 Contracted Researcher (Research) Universidade de Coimbra, Portugal
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
2013/06/01 - 2015/09/30 Auxiliary Researcher (Research) Universidade de Coimbra, Portugal
2008/06/01 - 2013/05/31 Auxiliary Researcher (Research) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Teaching in Higher Education

Category
Host institution
Employer
2019/09/01 - Current Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2017/09/01 - 2018/12/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
2017/09/01 - 2018/12/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal

Others

Category
Host institution
Employer
2015/10/01 - 2018/12/31 Post-Doc Fellowship Fundação para a Ciência e a Tecnologia, Portugal
2002/06/01 - 2008/05/31 Post-Doc Fellowship Fundação para a Ciência e a Tecnologia, Portugal
2001/08/01 - 2002/05/31 Project Fellowship Associação para a Inovação e Desenvolvimento em Ciência e Tecnologia, Portugal
1997/04/01 - 2001/07/31 PhD Studentship Fundação para a Ciência e a Tecnologia, Portugal
1995/01/01 - 1996/12/31 MSc Studentship JNICT - Junta Nacional de Investigação Científica e Tecnológica, Portugal
Projects

Grant

Designation Funders
2016/01/01 - 2017/12/31 Challenges in joining of titanium alloys
PT-SL 3365
Researcher
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluded

Contract

Designation Funders
2023/07/01 - 2025/12/31 INOV.AM - Innovation in Additive Manufacturing
Projeto nº 79999
Researcher
Universidade de Coimbra, Portugal
Ongoing
2023/01/01 - 2025/12/31 AM2R - AM2R - Mobilizing Agenda for business innovation in the two-wheel sector
Projeto nº 7253
Researcher
Universidade de Coimbra, Portugal
Ongoing
2023/01/01 - 2025/12/31 Drivolution - Transition to the Factory of the Future
1. Projeto nº 7141
Researcher
Universidade de Coimbra, Portugal
Ongoing
2021/03/01 - 2023/06/30 I9LOGO - Innovation in the development and production of logos for the automotive industry
POCI-01-0247-FEDER-072607
Researcher
Agência Nacional de Inovação SA
Concluded
2021/01/01 - 2023/06/30 Highlight - New solutions for ultra high gloss injection moulds
POCI-01-0247-FEDER-047156
Researcher
Agência Nacional de Inovação SA
Concluded
2020/09/30 - 2023/06/30 3DCompecer - Additive manufacturing of ceramic-based composites for mechanical components
POCI-01-0247-FEDER-047060
Researcher
Ongoing
2019/08/01 - 2022/07/31 Add.Powder - Development of metallic materials adapted to additive manufacturing (FDMet)
CENTRO-01-0247-FEDER-039910
Researcher
Universidade de Coimbra, Portugal
Agência Nacional de Inovação SA
Ongoing
2018/07/16 - 2022/07/15 CrackFree - Towards self-repairing metallic materials
POCI-01-0145-FEFER-029101
PTDC/CTM-CTM/29101/2017
Principal investigator
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
COMPETE2020 and FCT
Ongoing
2018/07/23 - 2022/02/28 NanoTiC - Nanojoining of Titanium to Ceramics
POCI-01-0145-FEDER-031579
PTDC/CTM-CTM/31579/2017
Researcher
Universidade do Porto Faculdade de Engenharia, Portugal
COMPETE2020 and FCT
Ongoing
2013/06/01 - 2015/09/30 MT4MOBI - Materials and Technologies for Greener Manufacturing & Products Applied to Mobility
CENTRO-07-0224-FEDER-002001
Researcher
Universidade de Coimbra, Portugal
European Regional Development Fund
Concluded
2010/01/01 - 2013/06/30 Joining micro to small scale systems in shape memory alloys using last generation infrared lasers
PTDC-EME-TME-100990-2008
Researcher
Fundação para a Ciência e a Tecnologia
Concluded
2007/11/01 - 2011/04/30 Nano-brazing of advanced materials
PTDC/CTM/69645/2006
Researcher
Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
1997 - 2010 Production of new intermetallic matrix materials for the aeronautical industry
PRAXIS XXI 3/3.1/CTAE/1904/95
Other
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/05/01 - 2008/04/30 Making bridges between 2D and 3D nc-materials
POCTI/CTM/55970/2004
Researcher
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2001/08/01 - 2002/05/31 EFRIC Development of new environment friendly industrial ceramics
G5ST-CT-2001-00244
Research Fellow
European Commission
Concluded
Outputs

Publications

Conference paper
  1. Francisco Cruz; Daniel Gatões; Nanci Alves; Sofia Ramos; Teresa Vieira. "Powder Bed Fusion For Chemical Composition Optimization Of Tool Steels". Paper presented in Euro PM2023, Lisboa, 2023.
    Published • 10.59499/ep235765450
  2. S. Simões; F. Viana; A.S. Ramos; M.T. Vieira; M.F. Vieira. "Diffusion bonding of TiAl alloys to steel using Ni/Al nanolayers". Paper presented in International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems, 2011.
    Published
  3. Vieira, M.F.; Vieira, M.T.; Ramos, A.S.; Simões, S.; Viana, F.. "Developments in diffusion bonding and brazing of advanced materials". 2010.
  4. Simões, S.; Viana, F.; Ventzke, V.; Koçak, M.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Solid-state diffusion bonding of TiAl by nanostructured materials". 2010.
  5. P. Gordo; M.D. Naia; A.S. Ramos; M.T. Vieira; Z. Kajcsos. "Positron studies on nanocrystalline copper thin films doped with nitrogen". Paper presented in ICPA15-15th International Conference on Positron Annihilation, 2009.
    Published
  6. F. Viana; A.S. Ramos; M.F. Vieira; M.T. Vieira. "Solid-state diffusion bonding using reactive multilayers". Paper presented in Eurojoin 6, 2006.
    Published
  7. M.F. Vieira; A.M.P. Pinto; F. Viana; A. Guedes; A.S. Ramos; L.I. Duarte. "Processos de Ligação de Aluminetos de Titânio". Paper presented in 61º Congresso Anual da Associação Brasileira de Metalurgia, 2006.
    Published
  8. M.T. Vieira; A.S. Ramos; L.I. Duarte; M.F. Vieira; F. Viana. "Thermal stability of nanometric Ti/Al multilayers". Paper presented in Microscopy in Motion 2005 - XLth Meeting of the Portuguese Society of Electron Microscopy and Cell Biology, Lisboa, 2005.
    Published
  9. J.M. Antunes; L.F. Menezes; M.F. Vieira; J.V. Fernandes; B. Trindade; A.S. Ramos; M.T. Vieira. "Numerical study on the ductility of thin films in tension". Paper presented in Plasticity 2000, 2000.
    Published
  10. M.T. Vieira; B. Trindade; J.V. Fernandes; M.F. Vieira; A.S. Ramos. "Synthesis and optimisation by sputtering of new intermetallic compounds for foundry". Paper presented in Materiais'99, Guimarães, 1999.
    Published
  11. M.T. Vieira; B. Trindade; A.S. Ramos; C. Coelho. "Intermetallic thin films: from production to characterisation in salt environment". Paper presented in Euromat'98, Lisboa, 1998.
    Published
  12. J.M. Castanho; A.S. Ramos. "Mechanical Properties of sputtered multilayer coatings". Paper presented in International Conference on Industrial Tribology, 1997.
    Published
Edited book
  1. Ramos, A.S.. Intermetallics 2016. Basel, Switzerland: MDPI. 2017.
    Published • 10.3390/books978-3-03842-631-8 • Editor
Journal article
  1. Zohra Benzarti; Sandesh Itani; Castro, Jose David; Carvalho, Sandra; Ramos, Ana Sofia. Corresponding author: Zohra Benzarti. "Design multifunctional Mg-Zr coatings regulating Mg alloy bioabsorption". Journal of Magnesium and Alloys (2024): https://doi.org/10.1016/j.jma.2024.04.009.
    Accepted
  2. Resendes, Tomás; Freitas Rodrigues, Patrícia; Cruz, Francisco; Gatões, Daniel; Santos, Vítor Miguel; Ramos, Ana Sofia; Vieira, Maria Teresa. "Advanced medical monitoring: 3D printed prosthetics with integrated strain sensor". Progress in Additive Manufacturing (2024): http://dx.doi.org/10.1007/s40964-024-00615-y.
    Published • 10.1007/s40964-024-00615-y
  3. André V. Fontes; Patrícia Freitas Rodrigues; Daniela Santo; Ana Sofia Ramos. "Exploring the Influence of the Deposition Parameters on the Properties of NiTi Shape Memory Alloy Films with High Nickel Content". Coatings 14 (2024): 138-138. https://doi.org/10.3390/coatings14010138.
    Open access • Published • 10.3390/coatings14010138
  4. Pedro Carreira; Daniel Gatões; Nuno Alves; Ana Sofia Ramos; Maria Teresa Vieira. "Searching New Solutions for NiTi Sensors through Indirect Additive Manufacturing". Materials 15 (2022): 5007. https://doi.org/10.3390/ma15145007.
    Open access • Published • 10.3390/ma15145007
  5. Marcionilo Silva, Jr.; Ana Sofia Ramos; Maria Teresa Vieira; Sónia Simões. "Joining of Ti6Al4V to Al2O3 Using Nanomultilayers". Nanomaterials (2022): https://doi.org/10.3390/nano12040706.
    Open access • Published • 10.3390/nano12040706
  6. Gabriel Santos Silva; Lukasz Maj; Jerzy Morgiel; Maria Teresa Vieira; Ana Sofia Ramos. "Development of Actuators for Repairing Cracks by Coating W Wires with Reactive Multilayers". Materials 15 3 (2022): 869-869. https://doi.org/10.3390/ma15030869.
    10.3390/ma15030869
  7. Marcionilo Silva, Jr.; Ana S. Ramos; Sónia Simões. "Joining Ti6Al4V to Alumina by Diffusion Bonding Using Titanium Interlayers". Metals 11 11 (2021): 1728-1728. https://doi.org/10.3390/met11111728.
    10.3390/met11111728
  8. Madalena Belmar da Costa; António HS Delgado; Tomás Amorim Afonso; L. Proença; A.S. Ramos; Ana Mano Azul. "Investigating a Commercial Functional Adhesive with 12-MDPB and Reactive Filler to Strengthen the Adhesive Interface in Eroded Dentin". Polymers (2021): https://www.mdpi.com/2073-4360/13/20/3562.
    10.3390/polym13203562
  9. Pedro Cunha Lima; Patrícia Freitas Rodrigues; Ana Sofia Ramos; José D. M. da Costa; Francisco Manuel Braz Fernandes; Maria Teresa Vieira. "Experimental Analysis of NiTi Alloy during Strain-Controlled Low-Cycle Fatigue". Materials 14 16 (2021): 4455-4455. https://doi.org/10.3390/ma14164455.
    10.3390/ma14164455
  10. Marcionilo Silva, Jr.; Ana S. Ramos; M. Teresa Vieira; Sónia Simões. "Diffusion Bonding of Ti6Al4V to Al2O3 Using Ni/Ti Reactive Multilayers". Metals 11 4 (2021): 655-655. https://doi.org/10.3390/met11040655.
    10.3390/met11040655
  11. Ana Sofia Ramos; Sónia Simões; Lukasz Maj; Jerzy Morgiel; Maria Teresa Vieira. "Effect of Deposition Parameters on the Reactivity of Al/Ni Multilayer Thin Films". Coatings 10 8 (2020): 721-721. https://doi.org/10.3390/coatings10080721.
    10.3390/coatings10080721
  12. A.J. Cavaleiro; A.S. Ramos; F.M. Braz Fernandes; N. Schell; M.T. Vieira. "Follow-up structural evolution of Ni/Ti reactive nano and microlayers during diffusion bonding of NiTi to Ti6Al4V in a synchrotron beamline". Journal of Materials Processing Technology 275 (2020): 116354-8p.. https://doi.org/10.1016/j.jmatprotec.2019.116354.
    Published • 10.1016/j.jmatprotec.2019.116354
  13. Hodulova, Erika; Ramos, Ana S.; Kolenak, Roman; Kostolny, Igor; Simekova, Beata; Kovarikova, Ingrid. "Characterization of ultrasonic soldering of Ti and Ni with Ni/Al reactive multilayer deposition". Welding Technology Review 91 9 (2019): 51-57. http://dx.doi.org/10.26628/wtr.v91i9.1073.
    Published • 10.26628/wtr.v91i9.1073
  14. M. Dias; N. Pinhão; R. Faustino; R.M.S. Martins; A.S. Ramos; M.T. Vieira; J.B. Correia; et al. "New WC-Cu composites for the divertor in fusion reactors". Journal of Nuclear Materials 521 (2019): 31-37. https://doi.org/10.1016/j.jnucmat.2019.04.026.
    Published • 10.1016/j.jnucmat.2019.04.026
  15. André João Cavaleiro; A.S. Ramos; Francisco Braz Fernandes; Carsten Baehtz; Teresa Vieira. "Interaction between Ni/Ti Nanomultilayers and Bulk Ti-6Al-4V during Heat Treatment". Metals 8 878 (2018): 1-10. http://www.mdpi.com/2075-4701/8/11/878.
    Open access • Published • 10.3390/met8110878
  16. Sónia Simões; Filomena Viana; A.S. Ramos; M. Teresa Vieira; M.F. Vieira. "Microstructural Characterization of Dissimilar Titanium Alloys Joints Using Ni/Al Nanolayers". Metals 8 715 (2018): 1-13. http://www.mdpi.com/2075-4701/8/9/715.
    Open access • Published • 10.3390/met8090715
  17. Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Diffusion Bonding of TiAl to Ti6Al4V Using Nanolayers". Journal of Materials Engineering and Performance 27 10 (2018): 5064-5068. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045145140&partnerID=MN8TOARS.
    Published • 10.1007/s11665-018-3207-z
  18. Ramos, A.S.; Maj, L.; Morgiel, J.; Vieira, M.T.. "Coating of tungsten wire with Ni/Al multilayers for self-healing applications". Metals 7 754 (2017): 1-10. http://www.scopus.com/inward/record.url?eid=2-s2.0-85039957496&partnerID=MN8TOARS.
    Open access • Published • 10.3390/met7120574
  19. Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Braz Fernandes, F.M.; Vieira, M.T.. "The effect of heating rate on the phase transformation of Ni/Ti multilayer thin films". Vacuum 139 (2017): 23-25. http://www.scopus.com/inward/record.url?eid=2-s2.0-85012110475&partnerID=MN8TOARS.
    Published • 10.1016/j.vacuum.2017.02.004
  20. Simões, S.; Sofia Ramos, A.; Viana, F.; Teresa Vieira, M.; Vieira, M.F.. "TiAl diffusion bonding using Ni/Ti multilayers". Welding in the World 61 6 (2017): 1267-1273. http://www.scopus.com/inward/record.url?eid=2-s2.0-85031773513&partnerID=MN8TOARS.
    Published • 10.1007/s40194-017-0507-0
  21. Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Reaction-assisted diffusion bonding of TiAl alloy to steel". Materials Chemistry and Physics 171 (2016): 73-82. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957848888&partnerID=MN8TOARS.
    Published • 10.1016/j.matchemphys.2015.11.032
  22. Simões, S.; Ramos, A.S.; Viana, F.; Emadinia, O.; Vieira, M.T.; Vieira, M.F.. "Ni/Al Multilayers Produced by Accumulative Roll Bonding and Sputtering". Journal of Materials Engineering and Performance 25 10 (2016): 4394-4401. http://www.scopus.com/inward/record.url?eid=2-s2.0-84983468917&partnerID=MN8TOARS.
    Published • 10.1007/s11665-016-2304-0
  23. Emadinia, O.; Simões, S.; Viana, F.; Vieira, M.F.; Cavaleiro, A.J.; Ramos, A.S.; Vieira, M.T.. "Cold rolled versus sputtered Ni/Ti multilayers for reaction-assisted diffusion bonding". Welding in the World 60 2 (2016): 337-344. http://www.scopus.com/inward/record.url?eid=2-s2.0-84958817813&partnerID=MN8TOARS.
    Published • 10.1007/s40194-015-0282-8
  24. Simões, S.; Ramos, A.S.; Viana, F.; Vieira, M.T.; Vieira, M.F.. "Joining of TiAl to steel by diffusion bonding with Ni/Ti reactive multilayers". Metals 6 5 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84964900850&partnerID=MN8TOARS.
    Open access • Published • 10.3390/met6050096
  25. Simões, S.; Viana, F.; Sofia Ramos, A.; Teresa Vieira, M.; Vieira, M.F.. "Microstructural Characterization of Diffusion Bonds Assisted by Ni/Ti Nanolayers". Journal of Materials Engineering and Performance 25 8 (2016): 3245-3251. http://www.scopus.com/inward/record.url?eid=2-s2.0-84976617742&partnerID=MN8TOARS.
    Published • 10.1007/s11665-016-2135-z
  26. Ramos, Ana Sofia. "Characterization of TiAl diffusion bonds using Ni/Ti nanolayers". Microscopy and Microanalysis 22 S4 (2016): 54-55.
    Published
  27. Caiano, A.; Ramos, A.S.; Vieira, M.T.. "NiTi Wires Coated by Nanomultilayers - A Solution for Self-healing?". Microscopy and Microanalysis 21 (2015): 11-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944076849&partnerID=MN8TOARS.
    Accepted • 10.1017/S1431927615013860
  28. Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Fernandes, F.M.B.; Morgiel, J.; Baehtz, C.; Vieira, M.T.. "Phase transformations in Ni/Ti multilayers investigated by synchrotron radiation-based x-ray diffraction". Journal of Alloys and Compounds 646 (2015): 1165-1171. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937598317&partnerID=MN8TOARS.
    Published • 10.1016/j.jallcom.2015.06.037
  29. Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "TEM and HRTEM Characterization of TiAl Diffusion Bonds Using Ni/Al Nanolayers". Microscopy and Microanalysis 21 1 (2015): 132-139. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925248499&partnerID=MN8TOARS.
    Published • 10.1017/S1431927614013087
  30. S. Simões; F. Viana; A.S. Ramos; M.T. Vieira; M.F. Vieira. "Characterization of nanolayers at TiAl diffusion bonds". Microscopy and Microanalysis 21 S6 (2015): 96-97.
    Published
  31. Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Baetz, C.; Vieira, M.T.; Braz Fernandes, F.M.. "In situ phase evolution of Ni/Ti reactive multilayers". Journal of Materials Engineering and Performance 23 7 (2014): 2446-2449. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904791376&partnerID=MN8TOARS.
    Published • 10.1007/s11665-014-1072-y
  32. Ramos, A.S.; Cavaleiro, A.J.; Vieira, M.T.; Morgiel, J.; Safran, G.. "Thermal stability of nanoscale metallic multilayers". Thin Solid Films 571 P2 (2014): 268-274. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919875441&partnerID=MN8TOARS.
    Published • 10.1016/j.tsf.2014.05.065
  33. Cavaleiro, A.J.; Santos, R.J.; Ramos, A.S.; Vieira, M.T.. "In-situ thermal evolution of Ni/Ti multilayer thin films". Intermetallics 51 (2014): 11-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897835724&partnerID=MN8TOARS.
    Published • 10.1016/j.intermet.2014.02.019
  34. Cavaleiro, A.J.; Ramos, A.S.; Braz Fernandes, F.M.; Schell, N.; Vieira, M.T.. "In situ characterization of NiTi/Ti6Al4V joints during reaction-assisted diffusion bonding using Ni/Ti multilayers". Journal of Materials Engineering and Performance 23 5 (2014): 1625-1629. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901035140&partnerID=MN8TOARS.
    Published • 10.1007/s11665-014-0930-y
  35. Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Reaction zone formed during diffusion bonding of TiNi to Ti6Al4V using Ni/Ti nanolayers". Journal of Materials Science 48 21 (2013): 7718-7727. http://www.scopus.com/inward/record.url?eid=2-s2.0-84882615206&partnerID=MN8TOARS.
    Accepted • 10.1007/s10853-013-7592-2
  36. Ramos, A.S.; Vieira, M.T.. "An efficient strategy to detect latent fingermarks on metallic surfaces". Forensic Science International 217 1-3 (2012): 196-203. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858798775&partnerID=MN8TOARS.
    Published • 10.1016/j.forsciint.2011.10.047
  37. Ramos, A.S.; Vieira, M.T.. "Intermetallic compound formation in Pd/Al multilayer thin films". Intermetallics 25 (2012): 70-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858112829&partnerID=MN8TOARS.
    Published • 10.1016/j.intermet.2012.02.014
  38. Simões, S.; Viana, F.; Koç Ak, M.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Microstructure of reaction zone formed during diffusion bonding of TiAl with Ni/Al multilayer". Journal of Materials Engineering and Performance 21 5 (2012): 678-682. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862186284&partnerID=MN8TOARS.
    Published • 10.1007/s11665-012-0144-0
  39. Duarte, L.I.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Leinenbach, C.; Klotz, U.E.; Vieira, M.F.. "Diffusion bonding of gamma-TiAl using modified Ti/Al nanolayers". Journal of Alloys and Compounds 536 SUPPL.1 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84865698228&partnerID=MN8TOARS.
    Published • 10.1016/j.jallcom.2011.12.037
  40. Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Anisothermal solid-state reactions of Ni/Al nanometric multilayers". Intermetallics 19 3 (2011): 350-356. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650519283&partnerID=MN8TOARS.
    Published • 10.1016/j.intermet.2010.10.021
  41. Simões, S.; Viana, F.; Koak, M.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Diffusion bonding of TiAl using reactive Ni/Al nanolayers and Ti and Ni foils". Materials Chemistry and Physics 128 1-2 (2011): 202-207. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955841436&partnerID=MN8TOARS.
    Published • 10.1016/j.matchemphys.2011.02.059
  42. Pinto, E.M.; Ramos, A.S.; Vieira, M.T.; Brett, C.M.A.. "A corrosion study of nanocrystalline copper thin films". Corrosion Science 52 12 (2010): 3891-3895. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957676072&partnerID=MN8TOARS.
    Published • 10.1016/j.corsci.2010.08.001
  43. Simes, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "TEM characterization of as-deposited and annealed Ni/Al multilayer thin film". Microscopy and Microanalysis 16 6 (2010): 662-669. http://www.scopus.com/inward/record.url?eid=2-s2.0-79451473169&partnerID=MN8TOARS.
    Accepted • 10.1017/S143192761009392X
  44. Simões, S.; Viana, F.; Ventzke, V.; Koçak, M.; Sofia Ramos, A.; Teresa Vieira, M.; Vieira, M.F.. "Diffusion bonding of TiAl using Ni/Al multilayers". Journal of Materials Science 45 16 (2010): 4351-4357. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955473677&partnerID=MN8TOARS.
    Published • 10.1007/s10853-010-4303-0
  45. Ramos, A.S.; Vieira, M.T.; Simões, S.; Viana, F.; Vieira, M.F.. "Reaction-assisted diffusion bonding of advanced materials". Defect and Diffusion Forum 297-301 (2010): 972-977. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952304218&partnerID=MN8TOARS.
    Published • 10.4028/www.scientific.net/DDF.297-301.972
  46. Ramos, A.S.; Vieira, M.T.; Morgiel, J.; Grzonka, J.; Simões, S.; Vieira, M.F.. "Production of intermetallic compounds from Ti/Al and Ni/Al multilayer thin films-A comparative study". Journal of Alloys and Compounds 484 1-2 (2009): 335-340. http://www.scopus.com/inward/record.url?eid=2-s2.0-69949099837&partnerID=MN8TOARS.
    Published • 10.1016/j.jallcom.2009.04.098
  47. Simões, S.; Viana, F.; Ventzke, V.; Koçak, M.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Joining of TiAl alloys using Ni/Al multilayers". Microscopy and Microanalysis 15 SUPPL.3 (2009): 73-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888239509&partnerID=MN8TOARS.
    Published • 10.1017/S1431927609990821
  48. Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.. "Intermixing in Ni/Al multilayer thin films". Microscopy and Microanalysis 15 SUPPL.3 (2009): 75-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650521125&partnerID=MN8TOARS.
    Published • 10.1017/S1431927609990833
  49. Ramos, D.A.S.; Vieira, M.T.; Serra, C.. "Ti/AI nanolayered thin films". Journal of Nanoscience and Nanotechnology 9 6 (2009): 3627-3632. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649183312&partnerID=MN8TOARS.
    Published • 10.1166/jnn.2009.NS41
  50. Ramos, A.S.; Vieira, M.T.; Simões, S.; Viana, F.; Vieira, M.F.. "Joining of superalloys to intermetallics using nanolayers". Advanced Materials Research 59 (2009): 225-229. http://www.scopus.com/inward/record.url?eid=2-s2.0-69949099234&partnerID=MN8TOARS.
    Published • 10.4028/3-908454-01-8.225
  51. Noro, J.; Ramos, A.S.; Vieira, M.T.. "Intermetallic phase formation in nanometric Ni/Al multilayer thin films". Intermetallics 16 9 (2008): 1061-1065. http://www.scopus.com/inward/record.url?eid=2-s2.0-50249182792&partnerID=MN8TOARS.
    Accepted • 10.1016/j.intermet.2008.06.002
  52. Ramos, A.S.; Simões, S.; Calinas, R.; Viana, F.. "Effect of temperature in the evolution of Ni/Al nanolayers". Microscopy and Microanalysis 14 SUPPL. 3 (2008): 41-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-53349172136&partnerID=MN8TOARS.
    Published • 10.1017/S1431927608089332
  53. Duarte, L.I.; Viana, F.; Vieira, M.F.; Ramos, A.S.; Vieira, M.T.; Klotz, U.E.. "Bonding g-TiAl alloys using Ti/Al nanolayers doped with Ag". Materials Science Forum 587-588 (2008): 488-491. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349131134&partnerID=MN8TOARS.
    Published
  54. Vieira, M.T.; Noro, J.; Ramos, A.S.. "From nanometric Ni/Ai multilayers to intermetallic thin films". Structural Aluminides for Elevated Temperatures - Gamma Titanium and Other Metallic Aluminides (2008): 391-398.
    Published
  55. Vieira, M.T.; Ramos, A.S.; Castanho, J.M.; Oliveira, J.C.; Cavaleiro, A.. "From Ti-Al- to Ti-Al-N-sputtered 2D materials". Journal of Materials Science 42 22 (2007): 9145-9153. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548544190&partnerID=MN8TOARS.
    10.1007/s10853-007-1933-y
  56. Vieira, S.C.; Ramos, A.S.; Vieira, M.T.. "Mullitization kinetics from silica- and alumina-rich wastes". Ceramics International 33 1 (2007): 59-66. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750683086&partnerID=MN8TOARS.
    Published • 10.1016/j.ceramint.2005.07.015
  57. Ramos, A.S.; Calinas, R.; Vieira, M.T.. "The formation of g-TiAl from Ti/Al multilayers with different periods". Surface and Coatings Technology 200 22-23 (2006): 6196-6200. http://dx.doi.org/10.1016/j.surfcoat.2005.11.023.
    Published • 10.1016/j.surfcoat.2005.11.023
  58. Duarte, L.I.; Ramos, A.S.; Vieira, M.F.; Viana, F.; Vieira, M.T.; Koçak, M.. "Solid-state diffusion bonding of gamma-TiAl alloys using Ti/Al thin films as interlayers". Intermetallics 14 10-11 (2006): 1151-1156. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746738144&partnerID=MN8TOARS.
    Published • 10.1016/j.intermet.2005.12.011
  59. Ramos, A.S.; Vieira, M.T.; Duarte, L.I.; Vieira, M.F.; Viana, F.; Calinas, R.. "Nanometric multilayers: A new approach for joining TiAl". Intermetallics 14 10-11 (2006): 1157-1162. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746715571&partnerID=MN8TOARS.
    Published • 10.1016/j.intermet.2005.12.012
  60. Ramos, A.S.; Vieira, M.T.; Vieira, M.F.; Viana, F.. "Joining of gamma-based titanium aluminides - A review". Materials Science Forum 514-516 (2006): 483-489. http://www.scopus.com/inward/record.url?eid=2-s2.0-38049073864&partnerID=MN8TOARS.
    Published
  61. Duarte, L.I.; Ramos, A.S.; Vieira, M.F.; Viana, F.; Vieira, M.T.. "Joining of TiAl using a thin multilayer". Materials Science Forum 514-516 (2006): 1323-1327. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746722098&partnerID=MN8TOARS.
    Published
  62. Ramos, A.S.; Vieira, M.T.. "Kinetics of the thin films transformation Ti/Al multilayer - g-TiAl". Surface and Coatings Technology 200 1-4 (2005): 326-329. http://dx.doi.org/10.1016/j.surfcoat.2005.01.080.
    Published • 10.1016/j.surfcoat.2005.01.080
  63. Ramos, A.S.; Vieira, M.T.. "Properties of g-TiAl-M (M = Ag, Cr) sputtered films". Materials Science Forum 426-432 (2003): 1843-1848. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038606002&partnerID=MN8TOARS.
    Published
  64. Vieira, M.T.; Trindade, B.; Ramos, A.S.; Fernandes, J.V.; Vieira, M.F.. "Mechanical characterisation of g-TiAl thin films obtained by two different sputtering routes". Materials Science and Engineering A 329-331 (2002): 147-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036601461&partnerID=MN8TOARS.
    Published • 10.1016/S0921-5093(01)01550-7
  65. Antunes, J.M.; Menezes, L.F.; Vieira, M.F.; Fernandes, J.V.; Trindade, B.; Ramos, A.S.; Vieira, M.T.. "On the evaluation of the ductility of thin films". Materials Science and Engineering A 337 1-2 (2002): 97-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037176108&partnerID=MN8TOARS.
    Published • 10.1016/S0921-5093(01)01991-8
  66. Guedes, A.; Pinto, A.M.P.; Vieira, M.; Viana, F.; Ramos, A.S.; Vieira, M.T.. "Microstructural characterisation of y-TiAi joints". Key Engineering Materials 230-232 (2002): 27-30. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036430590&partnerID=MN8TOARS.
    Published
  67. Ramos, A.S.; Vieira, M.T.; Louro, C.; Cavaleiro, A.. "Oxidation behaviour of (TiAl)-based intermetallics doped with silver". Key Engineering Materials 230-232 (2002): 60-63. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036429171&partnerID=MN8TOARS.
    Published
  68. Ramos, Ana Sofia. "The effect of a titanium-based interlayer on the adhesion of ceramic coatings". Adhesion Aspects of Thin Films 1 (2001): 171-180.
    Published
  69. Vieira, M.T.; Ramos, A.S.; Trindade, B.; Fernandes, J.V.; Vieira, M.F.. "An approach using thin films as a predictive way to produce new bulk materials". Surface and Coatings Technology 131 1-3 (2000): 162-166. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034532241&partnerID=MN8TOARS.
    Published • 10.1016/S0257-8972(00)00755-6
  70. Coelho, C.; Ramos, A.S.; Trindade, B.; Vieira, M.T.; Fernandes, J.V.; Vieira, M.. "Characterisation of modified sputtered (TiAI)-based intermetallic materials doped with silver and chromium". Key Engineering Materials 188 (2000): 37-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033657787&partnerID=MN8TOARS.
    Published
  71. Coelho, C.; Ramos, A.S.; Trindade, B.; Vieira, M.T.; Fernandes, J.V.; Vieira, M.. "Structure and properties of sputtered TiAl-M (M=Ag, Cr) thin films". Surface and Coatings Technology 120-121 (1999): 297-302. http://www.scopus.com/inward/record.url?eid=2-s2.0-4243936139&partnerID=MN8TOARS.
    Published
  72. Tavares, C.J.; Rebouta, L.; Andritschky, M.; Ramos, S.. "Mechanical characterisation of TiN/ZrN multi-layered coatings". Journal of Materials Processing Technology 92-93 (1999): 177-183. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342756764&partnerID=MN8TOARS.
    Published • 10.1016/S0924-0136(99)00126-0
  73. Vieira, M.T.; Trindade, B.; Ramos, A.S.; Femandes, J.V.; Vieira, M.F.. "The influence of silver on the structure and mechanical properties of (TiAl)-based intermetallics". Thin Solid Films 343-344 1-2 (1999): 43-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032685966&partnerID=MN8TOARS.
    Published
  74. Vieira, M.T.; Ramos, A.S.. "Influence of ductile interlayers on the mechanical performance of tungsten nitride coatings". Journal of Materials Processing Technology 92-93 (1999): 156-161. http://www.scopus.com/inward/record.url?eid=2-s2.0-0343168027&partnerID=MN8TOARS.
    Published • 10.1016/S0924-0136(99)00235-6
  75. Vaz, F.; Rebouta, L.; Ramos, S.; Cavaleiro, A.; Da Silva, M.F.; Soares, J.C.. "Physical and mechanical properties of Ti1-xSixN films". Surface and Coatings Technology 100-101 1-3 (1998): 110-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032027068&partnerID=MN8TOARS.
    Published
  76. Vaz, F.; Rebouta, L.; Ramos, S.; Da Silva, M.F.; Soares, J.C.. "Physical, structural and mechanical characterization of Ti1-xSixNy films". Surface and Coatings Technology 108-109 (1998): 236-240. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038832585&partnerID=MN8TOARS.
    Published
Thesis / Dissertation
  1. A.S. Ramos. "Mechanical and Chemical Behaviour of Ti-Al-(M) Thin Films". PhD, Universidade de Coimbra, 2002.
  2. A.S. Ramos. "Production and characterization of ceramic/metal multilayer coatings". Master, Universidade de Coimbra, 1997.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/09/03 A review on the use of reactive multilayer thin films to enhance the diffusion bonding process of similar and dissimilar materials FEMS Euromat23 – Materials Science and Technology in Europe
(Frankfurt, Germany)
2021/07 Diffusion bonding of Ti6Al4V to Al2O3 using different interlayer materials IIW2021 - 74th International Institute of Welding Annual Assembly and International Conference.
International Institute of Welding (Virtual)
2019/09 Microstructure of as-deposited and ignited Ni/Me (Me = Al, Ti) reactive multilayer thin films sputtered onto W wires Euromat 2019 – European Congress and Exhibition on Advanced Materials and Processes
(Estocolmo, Sweden)
2018/10/08 Advanced Research in Reactive Multilayer Thin Films for Joining Applications 6th Intermediate meeting of International Institute of Welding commission XVII "Brazing, diffusion bonding and soldering"
(Trnava, Slovakia)
2017/06/21 Reaction-assisted diffusion bonding of dissimilar materials WEDB – Symposium of World Experts in Diffusion Bonding
(Milton Keynes)
2016/09/13 Ni/Al multilayer nano films with increased reactivity PSE 2016 – 15th International Conference on Plasma Surface Engineering
(Garmish-Partenkirchen, Germany)
2016/09 Phase transitions in Ni/Ti nanomultilayers under different heating cycles NANOSMAT 2016 - 11th International Conference on Surfaces, Coatings and Nanostructured Materials
(Aveiro)
2014/12 From Ni/Me Nanomultilayer to Intermetallic Thin Films Materials Research Society 2014 Fall Meeting & Exhibit
(Boston)
2014/11 NiTi Wires Coated by Nanomultilayers - A Solution for Self-healing? INCOMAM’14 – International Conference on Microscopy and Microanalysis
(Portugal, Portugal)

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2023 - 2023 Production and characterization of shape memory films for microeletromechanical systems
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023 - 2023 Mg-Zr sputtered coatings: Towards biodegradable material for temporary bone implants
Co-supervisor
Tribologia de Superfícies e Interfaces (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/01 - 2022/06 Ligação por difusão no estado sólido entre a liga Ti6Al4V e o cerâmico Al2O3 revestidos com filmes monolíticos e multicamada
Co-supervisor of Marcionilo Neri da Silva Júnior
Doctoral Program in Metallurgical and Materials Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2022 - 2022 Mechanical and tribological behavior of 3D parts manufactured by additive processes
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Utilização de multicamadas reativas no desenvolvimento de atuadores para reparação de fissuras
Co-supervisor
Engenharia de Materiais (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Fabricação Aditiva por FFF de Provetes de Fadiga da Liga AA7050
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Otimização da deposição de filmes multicamada reativos sobre fios de tungsténio
Supervisor
Engenharia de Materiais (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Deteção da propagação de fendas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Ligação por difusão dissimilar de ligas de titânio assistida por multicamadas Ni/Al
Co-supervisor
Engenharia Metalúrgica e de Materiais (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2016 Caracterização de multicamadas reativas e a sua aplicação na ligação por difusão
Co-supervisor
Engenharia Metalúrgica e de Materiais (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2015 - 2015 Desenvolvimento de superfícies para sistemas fotovoltaicos de elevado rendimento
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Desenvolvimento de novos sistemas de deteção de fissuras para autorreparação (Self-Healing)
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2014 Revestimento de fios de Nitinol - uma aproximação para a reparação de dispositivos médicos
Supervisor
Engenharia de Materiais (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Event organisation

Event name
Type of event (Role)
Institution / Organization
2022/07/19 - 2022/07/22 Organizing Committee of Junior Euromat 2022, Coimbra, Portugal (2022/07/19 - 2022/07/22)
Conference (Member of the Organising Committee)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2013/03/25 - 2013/03/27 Local Organizing Committee of the International Materials Symposium, Materiais 2013, Coimbra, Portugal, 2013. (2013/03/25 - 2013/03/27)
Congress (Member of the Organising Committee)
Universidade de Coimbra, Portugal
2010 - 2010 Workshop "Microjoining by Nanostructured Materials" (2010/04/12 - 2010/04/12)
Workshop (Member of the Organising Committee)
Universidade do Porto Faculdade de Engenharia, Portugal

Event participation

Activity description
Type of event
Event name
Institution / Organization
2023/09/29 - 2023/09/29 Activity "Sustainability and Inclusion CEMMPRE" in European Researchers' Night 2023
Other
European Researchers' Night 2023
Universidade de Coimbra, Portugal
2022/09/30 - 2022/09/30 Activity "CEMMPRE for the Future" in European Researchers' Night 2022.
Other
European Researchers' Night 2022
Universidade de Coimbra, Portugal
2021/09/24 - 2021/09/24 CEMMPRE activity "#Materials4Climate" in European Researchers' Night 2021.
Other
European Researchers' Night 2021
Universidade de Coimbra, Portugal
2020/07/22 - 2020/07/25 Participation in the Meetings of Commissions VII "Microjoining and Nanojoining" and XVII "Brazing, Soldering and Diffusion Bonding".
Congress
IIW2020 – 73rd International Institute of Welding Annual Assembly and International Conference (Online), 22-25 julho 2020.

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2023 Improvement And Tailoring Of Parts Fabricated With Wire And Arc Additive Manufacturing Tiago Miguel André Rodrigues (PhD)
Universidade NOVA de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2023 Si-Sn and Si-Sn-X (X = Ti, Cu, and Zn) systems for humidity sensing applications fabricated by non-equilibrium techniques Neeraj Kumar (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 Processing NiTi Shape Memory Alloy Powder by Material Extrusion (MEX) Pedro José da Silva Carreira (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 Low Friction, High Wear Resistant Nickel-Based Coatings for Sliding Rubber Contacts Obtained by Electroless Maria Beatriz Nunes Medeiros Vasconcelos (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 Design of new biocompatible osseointegrated and antimicrobial dental implant. Luísa Isabel Serra da Glória Fialho (PhD)
Universidade do Minho, Portugal
2020 Implementação à escala semi-industrial da deposição por pulverização catódica de filmes finos de DMT com adição de carbono para aplicações tribológicas Todor Vuchkov (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Association member

Society Organization name Role
2023 - Current SPM - Sociedade Portuguesa de Materiais Member
2017/10/01 - Current International Institute of Welding, Commission VII "Microjoining and Nanojoining" Member
2013/11/01 - Current Joining Sub-platform of the Manufuture platform (created from European Commission initiative) Member
2010/07/01 - Current International Institute of Welding, Commission XVII "Brazing, Soldering and Diffusion Bonding" Member
2008/01/01 - Current Portuguese Society of Microscopy Member

Committee member

Activity description
Role
Institution / Organization
2022/04/11 - Current Vice-Coordinator of the R&D Unit CEMMPRE - Centre for Mechanical Engineering, Materials and Processes.
Other
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 - 2022/04/10 Coordinating Committee of CEMMPRE R&D Unit
Member
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Interview (tv / radio show)

Program Topic
2023/06/01 - 2023/06/01 90 Segundos de Ciência CrackFree Project
2023/05 - 2023/05 Podcast Equal.Steam project, which aims to attract and retain girls and women in Higher Education in Technological and Engineering Areas. This activity intended to create a series of 10 podcast interviews about University of Coimbra researchers who contributed/contribute to invention, innovation and knowledge.

Journal scientific committee

Journal title (ISSN) Publisher
2002 - Current Surface and coatings Technology Elsevier
2002 - Current Journal of Alloys and Compounds Elsevier
2002 - Current Intermetallics Elsevier
2002 - Current Materials & Design Elsevier
2002 - Current Vacuum Elsevier
2002 - Current Applied Surface Science Elsevier
2002 - Current Journal of Materials Processing Technology Elsevier
2002 - Current Micron Elsevier
2002 - Current Materials Chemistry and Physics Elsevier
2002 - Current Welding in the World Springer
2002 - Current Optical and Quantum Electronics Springer
2002 - Current Journal of Materials Engineering and Performance ASM International
2002 - Current Applied Sciences MDPI
2002 - Current Metals MDPI
2002 - Current Journal of Vacuum Science & Technology B AVS Science and Technology Society
2002 - Current Plasma Processes & Polymers Wiley
2002 - Current AIMS Materials Science AIMS Press
Distinctions

Other distinction

2015 Post-Doc Fellowship (BPD/109788/2015)
2002 Post-Doc Fellowship (BPD/6771/2001)
1997 PhD Fellowship (BD/3623)
1995 MSc Fellowship