???global.info.a_carregar???
José Pedro Sousa is an architect graduated from the FAUP at the University of Porto (UP, 1999), Master in Genetic Architectures from the ESARQ at the International University of Catalunya (UIC, 2002), and PhD in Architecture from the IST at the University of Lisbon (UL, 2010). During his doctoral studies, he was a Special Student at MIT (Cambridge, MA, 2003) and a Visiting Scholar at the UPenn (Philadelphia, PA, 2005). He is currently an Associate Professor at FAUP, teaching courses related with geometry, design computation and digital fabrication in the Master and Doctoral programs. At FAUP, he founded and directs the DFL (Digital Fabrication Lab), which is a research group of CEAU-FAUP dedicated to explore the impact of advanced digital technologies in architectural design thinking and practice. Among other research achievements, he was the PI of an FCT Research project that pioneered the use of robotic technologies in architecture in Portugal, and has been the coordinator of several collaborations with major industrial companies like Amorim, Mota Engil or DST, which generated innovative commercial products and building applications. Involving a FAUP + ISCTE/IUL collaboration, he was Co-Director of the Advanced Studies Program in Digital Architecture (CEAAD), and of the Professional Master in Digital Innovation for Design Practices (MDI) to start in Sep 2024. At FAUP he is also a Member of its Executive Board (in charge of Innovation, Entrepreneurship, Internationalization and ICT), and a Member of the Scientific Council of FAUP´s Research Center CEAU. Prior to FAUP, he was a Faculty Professor at the FCTUC (Coimbra), ESARQ-UIC (Barcelona) and IAAC (Barcelona). In the last 2 decades, his professional activity has combined the realms of teaching, research and practice, exploring the new conceptual and material opportunities emerging from the use of digital technologies in architecture. His work at all these levels has been regularly presented in international conferences and invited lectures (e.g., Europe, USA, Singapore, Hong Kong, Brazil or Australia) and has been published in major international magazines and peer-reviewed publications. Among other activities, he was the Co-Chair of the joint Conference between two international Scientific Associations -the eCAADe (European) and the SIGraDi (Iberoamerican) -, which took place in September 2019 at FAUP under the topic of 'Architecture in the Age of the 4th Industrial Revolution', and Co-Editor of two Special Issues of the International Journal of Architectural Computing (IJAC) on that same topic. He also co-founded and run two companies in the past: the ReD, Research+Design Studio which received design awards such as the 2005 FEIDAD Award (Taiwan) or the OutrosMercadus 06 or the NEOTEC grant 07, and the OPOLab in Porto, which was the first FabLab working in Portugal. At a personal level, he received the Young Research Award from the University of Lisbon (2009) during his PhD studies and the Pedagogic Innovation Project Award from the University of Porto (2017 and 2018). In March 2021, the European Commission appointed him as a member of the High-Level Roundtable for the New European Bauhaus movement, and he has been serving in this capacity ever since.
Read full resume ↓
Identification

Personal identification

Full name
JOSÉ PEDRO OVELHEIRO MARQUES DE SOUSA

Citation names

  • Sousa, Jose Pedro
  • Sousa, JP
  • Sousa, J P

Author identifiers

Ciência ID
AD15-8E4E-7372
ORCID iD
0000-0003-0024-4622
Google Scholar ID
RDhIyjkAAAAJ&hl
Researcher Id
A-1477-2015
Scopus Author Id
55358683300

Websites

  • FAUP - https://sigarra.up.pt/faup/en/func_geral.formview?p_codigo=463797 (Professional)
  • DFL - http://dfl.arq.up.pt (Professional)
  • Linkedin - https://www.linkedin.com/in/jose-pedro-sousa-026b196/ (Social media)
  • New European Bauhaus - https://europa.eu/new-european-bauhaus/about/high-level-roundtable_en (Professional)
  • eCAADe - http://ecaade.org/organisation/council/ (Professional)

Knowledge fields

  • Humanities - Arts - Architectural design

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Spanish; Castilian Proficiency (C2) Proficiency (C2) Upper intermediate (B2) Proficiency (C2) Advanced (C1)
French Elementary (A2) Intermediate (B1) Elementary (A2) Intermediate (B1) Elementary (A2)
Education
Degree Classification
2010/06
Concluded
 PhD in Architecture (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"From Digital to Material: Rethinking Cork in Architecture Through the Use of CAD/CAM Technologies" (THESIS/DISSERTATION)
2005
Concluded
 Visiting Scholar - Architecture (Outros)
University of Pennsylvania School of Design, United States
2003
Concluded
 Special Student - Design and Computation (Outros)
Major in Design and Computation
Massachusetts Institute of Technology School of Architecture and Planning, United States
 A
2002
Concluded
 Master in Genetic Architectures (Pós-Graduação)
Universitat Internacional de Catalunya, Spain
 Sobresaliente
1999
Concluded
 Graduation in Architecture (Licenciatura)
Universidade do Porto Faculdade de Arquitectura, Portugal
"A Arquitectura no Ecrã" (THESIS/DISSERTATION)
 16
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2022 - Current Associate Professor (University Teacher) Universidade do Porto, Portugal
Universidade do Porto Faculdade de Arquitectura, Portugal
2011 - 2022 Assistant Professor (University Teacher) Universidade do Porto, Portugal
Universidade do Porto Faculdade de Arquitectura, Portugal
2009 - 2014 Invited Assistant Professor (University Teacher) Universidade de Coimbra Departamento de Arquitectura, Portugal
Universidade de Coimbra Departamento de Arquitectura, Portugal
2011 - 2012 Visiting Professor (University Teacher) Institut d'Arquitectura Avançada de Catalunya, Spain
Institut d'Arquitectura Avançada de Catalunya, Spain
2009 - 2011 Invited Assistant Professor (University Teacher) Universidade do Porto Faculdade de Arquitectura, Portugal
Universidade do Porto Faculdade de Arquitectura, Portugal
2006 - 2008 Invited Assistant Professor (University Teacher) Institut d'Arquitectura Avançada de Catalunya, Spain
Institut d'Arquitectura Avançada de Catalunya, Spain
2004 - 2004 Lecturer (University Teacher) Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
2003 - 2003 Tutor (University Teacher) Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
1999 - 2001 Tutor (University Teacher) Universidade do Porto Faculdade de Arquitectura, Portugal
Universidade do Porto Faculdade de Arquitectura, Portugal

Positions / Appointments

Category
Host institution 		Employer
2021/03 - Current Member of the High-Level Roundtable of the New European Bauhaus New European Bauhaus, Belgium
European Commission Joint Research Centre, Belgium
2020/07 - Current Member of the eCAADe Council Education and Research in Computer-Aided Architectural Design in Europe (eCAADe), Belgium
Education and Research in Computer-Aided Architectural Design in Europe (eCAADe), Belgium
2008 - 2010 Member of the Direction Board Ordem dos Arquitectos Portugueses - Secção Regional Norte, Portugal
Ordem dos Arquitectos Portugueses - Secção Regional Norte, Portugal

Others

Category
Host institution 		Employer
2010 - Current Integrated Researcher Centro de Estudos em Arquitectura e Urbanismo (CEAU), Portugal
Universidade do Porto Faculdade de Arquitectura, Portugal
2011 - 2015 Founder & Partner OPOFABLAB, Lda (OPO'LAB), Portugal
OPOFABLAB, Lda (OPO'LAB), Portugal
2004 - 2008 Founder & Director ReD, Research + Design Lda, Portugal
ReD, Research + Design Lda, Portugal
2003 - 2005 FCT PhD Scholarhip Fundação para a Ciência e a Tecnologia, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
Projects

Contract

Designation Funders
2022 - Current R2U Technologies - Modular System
PRR - Agendas Mobilizadoras
Principal Researcher of FAUP
Universidade do Porto Faculdade de Arquitectura, Portugal

DST Group, Portugal
European Union
2020 - 2020 Archi-Scapes. Pedagogical approaches through emerging technologies in architectural design education (Erasmus +)
Submission ID: E10208851
Not funded
Principal investigator
Universidade do Porto Faculdade de Arquitectura, Portugal

Istanbul Teknik Üniversitesi, Turkey
Erasmus Plus
Not funded
2020 - 2020 PrintCof - Design and development of modular formwork of variable and/or complex geometry, with digitally assisted fabrication (Portugal 2020)
Not-Funded
Principal investigator
Universidade do Porto Faculdade de Arquitectura, Portugal

Instituto de Investigação e Desenvolvimento Tecnológico para a Construção Energia Ambiente e Sustentabilidade, Portugal
Not funded
2019/01/01 - 2019/12/31 Centro de Estudos de Arquitectura e Urbanismo
UID/AUR/00145/2019
Universidade do Porto Faculdade de Arquitectura, Portugal

Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2017 - 2017 BUILT-UP, Advanced fibre reinforced cementitious materials for existing and future built environment
Non-Funded
Researcher
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Arquitectura, Portugal

École Polytechnique Fédérale de Lausanne, Switzerland

Technische Universiteit Delft, Netherlands

Universitat Politècnica de Catalunya, Spain

Loughborough University, United Kingdom
EU Framework Programme for Research and Innovation Spreading Excellence and Widening Participation
Not funded
2013/07/01 - 2015/11/30 Robotic Technologies for Non-Standard Design and Construction in Architecture
Provided by PTCRIS: 132355
132355
PTDC/ATP-AQI/5124/2012
Principal investigator
Universidade do Porto Faculdade de Arquitectura, Portugal

Instituto de Engenharia de Sistemas e Computadores Tecnologia e Ciência, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Centro de Estudos em Arquitectura e Urbanismo (CEAU), Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013 - 2015 Industrial Contract for the Research Project - MD Fachada, MD Cobertura. Cork panels for Customized and Sustainable Facades and Roofs
Portugal 2020
Principal investigator
Amorim Insulation Cork, Portugal

Instituto de Investigação e Desenvolvimento Tecnológico para a Construção Energia Ambiente e Sustentabilidade, Portugal
Concluded
2014 - 2014 Printing Architecture
PTDC/ATP-AQ1/4189/2014
Non-Funded
Principal investigator
Universidade do Porto Faculdade de Arquitectura, Portugal

Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Cancelled
2012 - 2013 Robotic Construction in Architecture
PP-IJUP2011-234
Principal investigator
Universidade do Porto Faculdade de Arquitectura, Portugal

Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto
Concluded

Other

Designation Funders
2024 - Current Havelar - 3D Construction Printing
(N.A.)
Principal investigator
Universidade do Porto Faculdade de Arquitectura, Portugal
 European Union - PRR, Resilience and Recovery Plan
Ongoing
2021/05 - Current NEB goes South / New European Bauhaus - NEB LAB
NEB LAB
Consultant Member - High-level roundtable of the New European Bauhaus
Universidade do Porto Faculdade de Arquitectura, Portugal

National Technical University of Athens - School of Architecture, Greece

Universitat Politècnica de València Escuela Técnica Superior de Arquitectura, Spain

Università di Bologna - Università di Bologna, Italy

Sveucili¿te u Zagrebu Arhitektonski fakultet, Croatia

École nationale supérieure d'architecture de Toulouse, France
Ongoing
Outputs

Publications

Book
  1. Sousa, JP; Xavier, João Pedro; Gonçalo Castro Henriques. Architeture in the Age of the 4th Industrial Revolution, Proceedings of the eCAADe SIGraDi 2019 Conference. Porto, Portugal: FAUP. 2019.
    Published
  2. Sousa, JP. RobTech - Robotic Technologies for a Non-Standard Design in Architecture.. Portugal: FAUP. 2015.
    Published
  3. Sousa, JP; Xavier, João Pedro. Future Traditions. Rethinking traditions and envisioning the future in architecture through te use of digital technologies. Proceedings of the 1st eCAADe Regional International Workshop.. Portugal: FAUP Publications. 2013.
    Published
Book chapter
  1. B01A-BE8A-2E3D; Sousa, JP; 6716-0B08-451C. Corresponding author: B01A-BE8A-2E3D. "The Question of Housing in the Scope of NEB Goes South". In Towards a New European Bauhaus—Challenges in Design Education, 157-164. Springer Nature Switzerland, 2024.
    Published • 10.1007/978-3-031-40188-6_17
  2. Alexandra Castro; João Luís Marques; José Maria Lopes; Sousa, JP; Pedro Varela. "Vilanova’s Porto. Didactic Experiments on Drawing". In Graphic Horizons, 21-28. Springer, 2024.
    Published • 10.1007/978-3-031-57575-4_3
  3. 6716-0B08-451C; Sousa, JP; 3214-A512-B688; 5913-8A35-2037. "An Introduction to Solid Tessellations with Students of Architecture". In Polyhedra and Beyond. Trends in Mathematics, 137-147. Springer International Publishing. Birkhauser, 2022.
    Published • 10.1007/978-3-030-99116-6_10
  4. Sousa, JP. "My experience on SIGraDi Conferences". In SIGraDi #25 Sociedad Iberoamericana de Gráfica Digital 1997-2021, edited by Pablo C Herrera; David M Sperling; Gonçalo Castro Henriques; Simone Helena T Vizioli, 63-63. SIGraDi, 2022.
    Published • 10.11606/9786586810288
  5. Sousa, JP; F91A-DFB0-11D6; 2511-2205-587D; 7216-2985-2DB9; 261E-B6EA-9C7B; Mateus Pimenta. "Flying Earth". In Emerging voices on new architectural ecologies, edited by Cristina Veríssimo; Diogo Burnay, 83-90. Portugal: Circo de Ideias + Trienal de Arquitectura de Lisboa 2022, 2022.
    Published
  6. Sousa, JP; Gonzalez, Nohelia; 091C-8D8C-0910. "Juvarra digitale. L’esperienza della modellazione digitale di un teatro di Filippo Juvarra.". In Filippo Juvarra, Domenico Scarlatti. E il ruollo delle donne nella promozione dell'opera in Portogallo,, edited by D51C-C652-27F7, 101-114. Rome, Italy: Artemide, 2021.
    Published
  7. Sousa, JP. "Calculated Geometries. Experiments in Architectural Education and Research". In Thinking, Drawing, Modeling, 131-143. Springer, 2020.
    Published
  8. Sousa, JP; Gonzalez, Nohelia; Moreira, Eduardo; Pinto, Andry Maykol; Lima, José; Costa, Pedro; Costa, Paulo; VEIGA, GERMANO; Moreira, António Paulo. "SPIDERobot. A Cable-Robot System for On-site Construction in Architecture". In Towards a Robotic Architecture., edited by Mahesh Daas; Andrew John Witt, 166-177. United States: ORO Editions, 2019.
    Published
  9. Martins, Pedro Filipe; de Campos, Paulo Fonseca; Nunes, Sandra; Sousa, José Pedro. "The Tectonics of Digitally Fabricated Concrete. A Case for Robotic Hot Wire Cutting". In First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, 311-322. Springer International Publishing, 2018.
    10.1007/978-3-319-99519-9_29
  10. Xavier, João Pedro; Sousa, José Pedro; Castro, Alexandra. "Didactic Experiences on Digital Modeling. Anamorphosis". In ICGG 2018 - Proceedings of the 18th International Conference on Geometry and Graphics, 1789-1800. Springer International Publishing, 2018.
    Published • 10.1007/978-3-319-95588-9_160
  11. Sousa, JP; Gonzalez, Nohelia; Moreira, Eduardo; Maykol Pinto, Andry; Lima, José; Costa, Pedro; Veiga, Germano; Moreira, António Paulo. "SPIDERobot: Autonomous Robot for Building Construction". In Towards a Robotic Architecture, edited by Mahesh Daas; Andrew John Witt, 166-177. United States: ORO Editions, 2018.
    Published
  12. Sousa, JP. "When Architecture meets Nature". In Anuário de Cortiça 2016, 4-11. Portugal: Amorim, 2016.
    Published
  13. Sousa, JP. "Digital experiencies in teaching, research and practice". In Arquitecturas Genéticas IV, edited by Alberto T. Estévez, 134-139. ESARQ-UIC, 2011.
    Published
  14. Marta Malé-Alemany; Sousa, JP. "Computation and Materiality". In Manufacturing Material Effects, Rethinking Design and Making in Architecture, 129-144. United States: Routledge, 2008.
    Published
Conference paper
  1. Lacroix, Igor; Güzelci, Orkan Zeynel; Sousa, Jose Pedro. Corresponding author: Lacroix, Igor. "Evolutive Dataset for Social Housing Design Projects through Artificial Intelligence: From pixel to BIM through deep learning". Paper presented in 41st International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) - Digital Design Reconsidered, Graz, 2023.
    Published • 10.52842/conf.ecaade.2023.2.629
  2. F91A-DFB0-11D6; Sousa, JP. "Stereotomic BIM – a plugin for designing low carbon architecture". Paper presented in XXVII Congress of the Sociedad Iberoamericana de Gráfica Digital (SIGraDI) 2023 - Accelerated Landscapes, Punta del Este, 2023.
    Published
  3. Varela, P.A.; Lacroix, I.; Guzelci, O.Z.; Sousa, J.P.. "Democratizing Stereotomic Construction through AR Technologies: A reusable mold methodology to the production of customized voussoirs using HoloLens". 2022.
  4. Azevedo, M.I.; Pinho Da Costa, J.; Pombo, P.M.; De Azambuja Varela, P.; Sousa, J.P.. "Holographic art applications in new architectural practices". 2022.
    10.1117/12.2626625
  5. Lacroix, Igor; Gonçalo Lopes; Sousa, Jose Pedro. "Integrating sociological survey and algorithmic modelling for low-cost housing.". Paper presented in 39th eCAADe Conference - Towards a new, configurable architecture, Novi Sad, 2021.
    Published
  6. Krezlik, Adrian; Güzelci, Orkan Zeynel; Sousa, Jose Pedro. "Rob-LCA. An assessment method to support environmental sensitive material selection in robotic fabrication.". Paper presented in 39th eCAADe Conference - Towards a new, configurable architecture, Novi Sad, 2021.
    Published
  7. Azambuja Varela, Pedro; Sousa, Jose Pedro. "Drawing-to-factory process – using freehand drawing to drive robotic assembly of brick walls". Paper presented in 39th eCAADe Conference - Towards a new, configurable architecture, Novi Sad, 2021.
    Published
  8. Lacroix, I.; Lopes, G.F.; Sousa, J.P.. "Integrating Sociological Survey and Algorithmic Modelling for Low-Cost Housing". 2021.
  9. Krezlik, A.; Güzelci, O.Z.; Sousa, J.P.. "Rob-LCA An assessment method to support environmental sensitive material selection in robotic fabrication". 2021.
  10. Varela, P.A.; Sousa, J.P.; Dias, J.S.. "Drawing-to-Factory Process Using freehand drawing to drive robotic assembly of brick walls". 2021.
  11. de Azambuja Varela, Pedro; Sousa, JP. "Liquid Stereotomy - the Tamandua Vault". Paper presented in 38th eCAADe Conference - Anthropologic: Architecture and fabrication in the cognitive age, Berlin, 2020.
    Published
  12. Varela, P.A.; Sousa, J.P.. "Liquid Stereotomy-the Tamandua Vault". 2020.
  13. Sousa, J.P.. "Calculated Geometries. Experiments in Architectural Education and Research". 2020.
    10.1007/978-3-030-46804-0_10
  14. Pedro Martins; Paulo Fonseca de Campos; Sandra Nunes; Sousa, JP. "Rethinking the Philips Pavilion through robotic hot wire cutting – an experimental prototype". Paper presented in eCAADe SIGraDi Conference 2019, Porto, 2019.
    Published
  15. Azambuja Varela, Pedro; Sousa, JP. "Digital expansion of stereotomy – a semantic classification". Paper presented in eCAADe SIGraDi 2019 Conference, 2019.
    Published
  16. Martins, P.F.; Nunes, S.; de Campos, P.F.; Sousa, J.P.. "RETHINKING THE PHILIPS PAVILION THROUGH ROBOTIC HOT WIRE CUTTING. An experimental prototype". 2019.
    10.5151/proceedings-ecaadesigradi2019_660
  17. Silva, D.; Paio, A.; Sousa, J.P.. "Reprogramming Practice Revising design thinking through digital fabrication". 2019.
    10.5151/proceedings-ecaadesigradi2019_327
  18. Sousa, J.P.; Henriques, G.C.; Xavier, J.P.. "PREFACE". 2019.
    10.5151/proceedings-000
  19. Varela, P.A.; Sousa, J.P.. "Digital Expansion of Stereotomy A semantic classification". 2019.
    10.5151/proceedings-ecaadesigradi2019_340
  20. Shah, Anand; Sousa, JP. "A robotically fabricated connection system as a possible solution for a free-form ROBO-WEB gridshell which takes inspiration from English fan vaulted Cathedrals". Paper presented in 36th eCAADe Conference, Lodz, 2018.
    Published
  21. de Azambuja Varela, Pedro; Sousa, JP. "Reinforced, reusable, reconfigurable molds for cast voussoirs". Paper presented in 36th eCAADe Conference, Lodz, 2018.
    Published
  22. Azenha, Miguel; Lino, José Carlos; Caires, Bruno; Campos, Marta; Costa, António Aguiar; Lacerda, Nuno; Martins, João Poças; et al. "Curso BIM: uma abordagem eficiente através de aprendizagem orientada por projetos, dirigida para a indústria da AEC". 2018.
  23. Shah, Anand; Sousa, JP. "Robo-Web: design and assembly of a free-form gridshell". Paper presented in IASS Symposium 2018 – Creativity in Structural Design, Cambridge, MA, 2018.
    Published
  24. Sousa, J.P.; Varela, P.A.; Carvalho, J.; Santos, R.; Oliveira, M.. "Mass-customization of Joints for Non-Standard Structures through Additive Manufacturing The Trefoil and the TriArch projects". 2018.
  25. Shah, A.; Sousa, J.P.. "A Robotically Fabricated Connection System as a Possible Solution for a Free-form “ROBO-WEB” Gridshell which Takes Inspirations from English Fan Vaulted Cathedrals". 2018.
  26. Varela, P.A.; Sousa, J.P.. "Reinforced, Reusable, Reconfigurable Molds for Cast Voussoirs". 2018.
  27. Sousa, J.P.; Ferreira, B.M.; Cruz, N.A.. "Guidance of an Autonomous Surface Vehicle for Underwater Navigation Aid". 2018.
    10.1109/AUV.2018.8729815
  28. Daniela Silva; Alexandra Paio; José Pedro Sousa. "How digital fabrication can enable new methods in the architectural practice?". 2017.
    10.5151/sigradi2017-039
  29. Sousa, JP; de Azambuja Varela, Pedro; Martins, Pedro. "The CorkCrete Arch". Paper presented in 37th Annual Conference of the Association for Computer Aided Design in Architecture, ACADIA 2017, Cambridge, MA, 2017.
    Published
  30. Almeida, Daniel; Sousa, JP. "Tradition and innovation in digital architecture. Reviewing the Serpentine Gallery pavilion 2005". Paper presented in 35th eCAADe Conference, Rome, 2017.
    Published
  31. de Azambuja Varela, Pedro; Sousa, JP. "Fabricating stereotomy. Variable molds for cast voussoirs". Paper presented in 35th eCAADe Conference,, Rome, 2017.
    Published
  32. Varela, P.D.A.; Sousa, J.P.. "Fabricating Stereotomy Variable moulds for cast voussoirs". 2017.
  33. Almeida, D.; Sousa, J.P.. "Tradition and Innovation in Digital Architecture Reviewing the Serpentine Gallery Pavilion 2005". 2017.
  34. Sousa, J.P.; Martins, P.; De Varela, P.A.. "The corkcrete arch project: The digital design and robotic fabrication of a novel building system made out of cork and glass-fibre reinforced concrete". 2016.
  35. Oliveira, Rui; Sousa, JP. "Building Traditions with Digital Research – Reviewing the Brick Architecture of Raúl Hestnes Ferreira through Robotic Fabrication". Paper presented in 34th eCAADe Conference, Oulu, 2016.
    Published
  36. Martins, Pedro; Sousa, JP. "The Robotic Production of the GRC Panels in the CorkCrete Arch Project – A stratified strategy for the fabrication of customized molds". Paper presented in 34th eCAADe Conference, Oulu, 2016.
    Published
  37. de Azambuja Varela, Pedro; Sousa, JP. "Revising Stereotomy through Digital Technology". Paper presented in 34th eCAADe Conference, Oulu, 2016.
    Published
  38. Sousa, J.P.; Martins, P.F.. "The Robotic Production of the GRC Panels in the CorkCrete Arch Project A stratified strategy for the fabrication of customized molds". 2016.
  39. Varela, P.A.; Sousa, J.P.. "Revising Stereotomy through Digital Technology". 2016.
  40. Oliveira, R.; Sousa, J.P.. "Building Traditions with Digital Research Reviewing the Brick Architecture of Raúl Hestnes Ferreira through Robotic Fabrication". 2016.
  41. José Pedro Sousa; João Pedro Xavier. "A Fabricação Robótica no Ensino da Arquitetura: Uma Experiência Sobre o Projecto e Construção de Estruturas em Tijolo". 2015.
    10.5151/despro-sigradi2015-30345
  42. Eduardo Moreira; Andry Maykol Pinto; Paulo Costa; A. Paulo Moreira; Germano Veiga; Jose Lima; Jose Pedro Sousa; et al. "Cable robot for non-standard architecture and construction: A dynamic positioning system". 2015.
    10.1109/icit.2015.7125568
  43. Sousa, J.P.; Veiga, G.; Paulo Moreira, A.. "RObotic fabrication with cork: Emerging opportunities in architecture and building construction". 2015.
  44. de Azambuja Varela, Pedro; Sousa, JP. "Digital Flow in Stone Heritage Buildings. The Nasoni Keystone Experiment". Paper presented in 33rd eCAADe Conferenc, Vienna, 2015.
    Published
  45. Martins, Pedro; Fonseca de Campos, Paulo E.; Nunes, Sandra; Sousa, JP. "Expanding the Material Possibilities of Lightweight Prefabrication in Concrete Through Robotic Hot-Wire Cutting - Form, Texture and Composition". Paper presented in 33rd eCAADe Conference, Vienna, 2015.
    Published
  46. Sousa, JP; de Azambuja Varela, Pedro; Martins, Pedro. "Between Manual and Robotic Approaches to Brick Construction in Architecture". Paper presented in 33rd eCAADe Conference, Vienna, 2015.
    Published
  47. Martins, P.F.; de Campos, P.F.; Nunes, S.; Sousa, J.P.. "Expanding the Material Possibilities of Lightweight Prefabrication in Concrete Through Robotic Hot-Wire Cutting Form, Texture and Composition". 2015.
  48. Varela, P.A.; Sousa, J.P.. "Digital Flow in Stone Heritage Buildings: The Nasoni Keystone Experiment". 2015.
  49. Sousa, J.P.; Varela, P.A.; Martins, P.F.. "Between Manual and Robotic Approaches to Brick Construction in Architecture Expanding the Craft of Manual Bricklaying with the Help of Video Projection Techniques". 2015.
  50. Martins, Pedro; Nunes, Sandra; Sousa, Jose Pedro. "Elementos Compósitos em Betão com Geometria Complexa por Processos de Fabrico Automatizado". Paper presented in 5as Jornadas Portuguesas de Engenharia de Estruturas, Lisboa, 2014.
    Published
  51. Lopes, J.V.; Paio, A.C.; Sousa, J.P.. "Parametric urban models based on Frei Otto's generative form-finding processes". 2014.
  52. Sousa, JP. "Cork as a Digital Material". Paper presented in What’s the Matter – Materiality and Materialism in the age of Computation, 2014.
    Published
  53. Azambuja Varela, Pedro; paio, alexandra; Sousa, JP. "The Cork Vault Pavilion. A Design Research through Practice". Paper presented in 8th International Conference of the Architectural Science Association, Genoa, 2014.
    Published
  54. Martins, P.F.; Sousa, J.P.. "Digital Fabrication Technology in Concrete Architecture". 2014.
  55. Sousa, J.P.; Xavier, J.P.. "Symmetry-based generative design: A teaching experiment". 2013.
  56. Sousa, Jose Pedro. "On Ornamentation. A Digital Perspective.". 2005.
    10.13140/RG.2.1.3231.7281
  57. Sousa, J.P.; Duarte, J.P.. "Digital Desires, Material Realities Perceiving the technological gap". 2005.
  58. Malé-Alemany, M.; Sousa, J.P.. "Hyper [d-m] process emerging conditions for digital design and manufacturing in architecture". 2003.
Conference poster
  1. Azevedo, Maria Isabel; Joana Pinho da Costa; Azambuja Varela, Pedro; Sousa, JP; Pombo, Pedro. "Holographic art applications in new architectural practices". Paper presented in Photonics West 2022, 2022.
Dictionary entry
  1. Sousa, JP. "Countour Crafting". In 101 Conceitos de Arquitectura e Urbanismo na Era Digital. ProBooks, 2016.
    Published
  2. Sousa, JP. "NURBS". In 101 Conceitos de Arquitectura e Urbanismo na Era Digital. ProBooks, 2016.
    Published
  3. Sousa, JP. "Simulação Estrutural". In 101 Conceitos de Arquitectura e Urbanismo na Era Digital. ProBooks, 2016.
    Published
Edited book
  1. Luis Hermida González; 6716-0B08-451C; Sousa, JP; Vicente López-Chao. Graphic Horizons. Volume 1 - Graphics for analysis and thought. Springer Series in Design and Innovation. Springer Nature Switzerland. 2024.
    Published • 10.1007/978-3-031-57583-9 • Editor
Journal article
  1. 0910-5F8E-F100; Sousa, JP. Corresponding author: 0910-5F8E-F100. "The Architecture of Slicing. Balancing Automation, Design and Sustainability in Digitally Fabricated Concrete through RHWC". Joelho Revista de Cultura Arquitectonica - Digital Culture. What's Next? 14 (2023): 71-90. http://dx.doi.org/10.14195/1647-8681_14_4.
    Published • 10.14195/1647-8681_14_4
  2. Lacroix, I.; Güzelci, O.Z.; Lopes, G.F.; Sousa, J.P.. "Connecting the Portuguese system of evolutive housing with building information modeling: From analogical to digital methods". International Journal of Architectural Computing 20 4 (2022): 801-816. http://www.scopus.com/inward/record.url?eid=2-s2.0-85142190418&partnerID=MN8TOARS.
    10.1177/14780771221138954
  3. Orkan Zeynel Güzelci; Sousa, Jose Pedro; Xavier, João Pedro. "Integrated Structural and Environmental Form-Finding: A Teaching Experiment". Nexus Network Journal (2021): https://doi.org/10.1007/s00004-021-00582-9.
    Published • 10.1007/s00004-021-00582-9
  4. Henriques, G.C.; Sousa, J.P.; Gomez-Zamora, P.; Achten, H.. "Editorial - Architecture in the Age of the fourth Industrial Revolution (Special Issue 2)". International Journal of Architectural Computing 19 2 (2021): 119-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-85106968961&partnerID=MN8TOARS.
    10.1177/14780771211016677
  5. Henriques, G.C.; Sousa, J.P.; Gomez-Zamora, P.; Achten, H.. "Editorial - Architecture in the age of the 4th industrial revolution (Special Issue 1)". International Journal of Architectural Computing 18 4 (2020): 317-319. http://www.scopus.com/inward/record.url?eid=2-s2.0-85097422373&partnerID=MN8TOARS.
    10.1177/1478077120950939
  6. de Azambuja Varela, Pedro; Sousa, José Pedro. "Variable Casting of Voussoirs for a Stereotomic Shell". Nexus Network Journal 20 3 (2018): 627-644. http://dx.doi.org/10.1007/s00004-018-0382-z.
    Published • 10.1007/s00004-018-0382-z
  7. Pinto, A.M.; Moreira, E.; Lima, J.; Sousa, J.P.; Costa, P.. "A cable-driven robot for architectural constructions: a visual-guided approach for motion control and path-planning". Autonomous Robots 41 7 (2017): 1487-1499. https://link.springer.com/article/10.1007/s10514-016-9609-6.
    10.1007/s10514-016-9609-6
  8. Sousa, J.P.. "Robotic Technologies for Non-Standard Design and Construction in Architecture". Nexus Network Journal 19 1 (2017): 73-83. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986254036&partnerID=MN8TOARS.
    10.1007/s00004-016-0312-x
  9. Filipe Jorge da Silva Brandão; Alexandra Paio; José Pedro Sousa; Vasco Rato. "Cork Re-Wall: Computational Methods of Automatic Generation and Digital Fabrication of Cork Partition Walls for Building Renovation". Gestão & Tecnologia de Projetos (2016): https://doi.org/10.11606/gtp.v11i2.114602.
    10.11606/gtp.v11i2.114602
  10. José Pedro Sousa; João Pedro Xavier. "Symmetry-based generative design and fabrication: A teaching experiment". Automation in Construction 51 (2015): 113-123. http://dx.doi.org/10.1016/j.autcon.2014.11.001.
    10.1016/j.autcon.2014.11.001
  11. Sousa, Jose Pedro; Varela, Pedro Azambuja; Martins, Pedro Filipe; Martens, B; Wurzer, G; Grasl, T; Lorenz, WE; Schaffranek, R. "Between Manual and Robotic Approaches to Brick Construction in Architecture Expanding the Craft of Manual Bricklaying with the Help of Video Projection Techniques". Ecaade 2015: Real Time - Extending the Reach of Computation, Vol 2 (2015): 361-370. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000372316000042&KeyUID=WOS:000372316000042.
  12. Varela, Pedro de Azambuja; Sousa, Jose Pedro; Martens, B; Wurzer, G; Grasl, T; Lorenz, WE; Schaffranek, R. "Digital Flow in Stone Heritage Buildings The Nasoni Keystone Experiment". Ecaade 2015: Real Time - Extending the Reach of Computation, Vol 1 (2015): 717-726. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000372317300078&KeyUID=WOS:000372317300078.
  13. Martins, Pedro Filipe; de Campos, Paulo Fonseca; Nunes, Sandra; Sousa, Jose Pedro; Martens, B; Wurzer, G; Grasl, T; Lorenz, WE; Schaffranek, R. "Expanding the Material Possibilities of Lightweight Prefabrication in Concrete Through Robotic Hot-Wire Cutting Form, Texture and Composition". Ecaade 2015: Real Time - Extending the Reach of Computation, Vol 2 (2015): 341-351. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000372316000040&KeyUID=WOS:000372316000040.
  14. Martins, Pedro Filipe; Sousa, Jose Pedro; Thompson, EM. "Digital Fabrication Technology in Concrete Architecture". Fusion: Data Integration At Its Best, Vol 1 (2014): 475-484. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000361384700047&KeyUID=WOS:000361384700047.
  15. Sousa, Jose Pedro; Xavier, Joao Pedro; Stouffs, R; Janssen, P; Roudavski, S; Tuncer, B. "SYMMETRY-BASED GENERATIVE DESIGN: A TEACHING EXPERIMENT". Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (Caadria 2013) (2013): 303-312. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000351496100030&KeyUID=WOS:000351496100030.
  16. Sousa, J.P.. "Material Customization: Digital Fabrication Workshop at ISCTE/IUL". Nexus Network Journal 14 3 (2012): 573-578. https://link.springer.com/article/10.1007%2Fs00004-012-0123-7.
    Published • 10.1007/s00004-012-0123-7
Journal issue
  1. Gonçalo Castro Henriques; Sousa, JP; Paula Gomez-Zamora; Henri Achten. "Special Issue: Architecture in the Age of the 4th revolution 2(2)". IJAC, International Journal of Architectural Computing 19 2 (2021): https://journals.sagepub.com/toc/jaca/19/2.
    Published • Coeditor
  2. Gonçalo Castro Henriques; Sousa, JP; Paula Gomez-Zamora; Henri Achten. "Special Issue : Architecture in the Age of the 4th Industrial Revolution - 1(2)". IJAC, International Journal of Architectural Computing 18 4 (2020): https://journals.sagepub.com/toc/jaca/18/4.
    Published • Coeditor
Magazine article
  1. Sousa, Jose Pedro. "“The circular economy associated to cork is an absolutely extraordinary story – interview to Jose Pedro Sousa”", Amorim News, Year 38, N.2, 2021, ps://issuu.com/amorimnews/docs/uk_amorim_news_2_web.
Newsletter article
  1. Barros, Diana; Sousa, Jose Pedro. "Investigadores U.Porto – José Pedro Sousa. Membro da New European Bauhaus", Science @U.Porto , 2021, https://mkt.up.pt/reitoria/sip/sip-newsletter-entrevistajosepedrosousa.
Newspaper article
  1. Cunha, Rui Vieira; Sousa, Jose Pedro. "Professor da FAUP contribui para o Novo Bauhaus Europeu - Interview", JPN - Jornalismo Porto Net , 2021, https://www.jpn.up.pt/2021/03/17/professor-da-faup-contribui-para-o-novo-bauhaus-europeu/.
Report
  1. Ban, Shigeru; Bria, Francesca; Dávida, Eszter; Eliasson, Olafur ; Gylver, Gina; Heilbron, Thiemo; Ingels, Bjarke; et al. 2021. New European Bauhaus Concept Paper - Paper presented to the President of the European Commission Ursula von der Leyen by the New European Bauhaus High-Level Roundtable. https://europa.eu/new-european-bauhaus/system/files/2021-07/2021-06-30_New_European_Bauhaus_Concept_Paper_HLRT_FINAL.pdf.
  2. Sousa, JP. 2014. RobTech – Task 1.1 – Survey in computational design. Report of the Research Project “Robotic Technologies for a Non-Standard Design and Construction in Architecture”.
  3. Sousa, JP; Moreira, A. Paulo; VEIGA, GERMANO. 2014. RobTech – Task 1.2 – Survey in robotic technologies. Report of the Research Project “Robotic Technologies for a Non-Standard Design and Construction in Architecture.
  4. Sousa, JP; Xavier, João Pedro; Póvoas, Rui. 2014. RobTech – Task 1.3 – Survey in architectural design and construction. Report of the Research Project “Robotic Technologies for a Non-Standard Design and Construction in Architecture.

Artistic / Performance

Artistic exhibition
  1. Habitar Portugal 2003-05 - Exhibition design project for the Venice Architecture Biennale 2006. Featured in "Radar Veneza - Portuguese Architects in the Biennale 1975-2021". 2021.

Other

Other output
  1. Erratum to: The SPIDERobot: A Cable-Robot System for On-site Construction in Architecture. 2016. José Pedro Sousa; Cristina Gassó Palop; Eduardo Moreira; Andry Maykol Pinto; José Lima; Paulo Costa; Pedro Costa; Germano Veiga; A. Paulo Moreira. https://doi.org/10.1007%2F978-3-319-26378-6_40.
    10.1007/978-3-319-26378-6_40
  2. WAVE Panels (market product for building construction). Collection of decorative panels in cork, designed for the company Amorim Cork Insulation. 2016. Sousa, JP. https://www.amorimcorkinsulation.com/en/applications/Exterior-cladding-cork-at-sight-WAVE-FACADE-S1/304/.
  3. The SPIDERobot: A Cable-Robot System for On-site Construction in Architecture. 2016. José Pedro Sousa; Cristina Gassó Palop; Eduardo Moreira; Andry Maykol Pinto; José Lima; Paulo Costa; Pedro Costa; Germano Veiga; A. Paulo Moreira. https://doi.org/10.1007%2F978-3-319-26378-6_17.
    10.1007/978-3-319-26378-6_17
  4. Material Customization: Digital Fabrication Workshop at ISCTE/IUL. 2012. José Pedro Sousa. http://dx.doi.org/10.1007/978-3-0348-0582-7_12.
    10.1007/978-3-0348-0582-7_12
  5. MCity Exhibition Design. Design project supporting the MCity Exhibition (curator: Marco de Michelis) and consisting in two installations: FLUOScape and ConePLEX. (Project by own architecture studio - ReD, Research+Design). 2005. Sousa, JP; Marta Malé-Alemany.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2024/04/12 Moderator - Masterclass with the Masterpieces architects, with ENORME Studio, bkvv Architecten and Caterpillars The Festival of the New European Bauhaus
Art & History Museum (Brussels, Belgium)
2024/03/12 New European Bauhaus. Sustainability, beauty, inclusion.
Escola Artística de Soares dos Reis (Porto, Portugal)
2024/02/21 Desafios da IA ao ensino da Arquitectura (Challenges of AI in the teaching of Architecture). Semana FCT '24 - Dia da Arquitectura & Urbanismo.
Universidade Fernando Pessoa (Porto, Portugal)
2024/01/24 O Novo Bauhaus Europeu: o contributo das artes para a transição verde. Arte e Tecnologia pela Sustentabilidade
CEiiA (Matosinhos, Portugal)
2023/11/04 Arquitectura, Educação de Infância e a NEB (Sessão de Encerramento) Arquitectura e Educação de Infância. Construindo o Presente... e o Futuro
Faculdade de Arquitectura da Universidade do Porto + Associação de Profissionais de Educação de Infância (Porto, Portugal)
2023/10/27 Desafios éticos da IA aplicados à aprendizagem. Uma contextualização do ensino da arquitectura. Jornadas da Comissão de Ética da Universidade do Porto - Ética e Inteligência Artificial. Novas perspectivas para o Ensino e a Investigação,.
Universidade do Porto (Porto, Portugal)
2023/10/23 Six ideas for the future Forum 2050. Utopia - Foresight - Politics
Universidade do Porto (Porto, Portugal)
2023/09/26 From Cork to NEB (online) Digital Building Design - Seminar
École des Ponts Paris Tech (Paris, France)
2023/09/15 Roundtable - Perspectivas globais de sustentabilidade em Portugal Build - From High to Low Tech (II Edição)
Casa da Arquitectura (Matosinhos, Portugal)
2023/06/23 Roundtable - NEB in Buildings and Construction European Panel Federation - Annual General Meeting
ANFTA - Associacion Nacional de Fabricantes de Tableros (Porto, Portugal)
2023/05/26 Emergent architectures for climate justice and an inclusive digital future Radical yet Possible Future Space Solutions - New European Bauhaus
La Biennale di Venezia - 18 Mostra Internazionale di Architettura (Venice, Italy)
2023/05/11 Roundtable - Construir um futuro sustentável e inclusivo Forum de Sustentabilidade e Sociedade
Global Media Group + Camara Municipal de Matosinhos (Matosinhos, Portugal)
2023/05/09 Design e Sustentabilidade: Novo Bauhaus Europeu Conferência sobre o Futuro da Europa
Europe Direct - Baixo Alentejo (Beja, Portugal)
2023/04/13 The New European Bauhaus - (online) International Workshop - Online Talks on New European Bauhaus and AI applied to Interior Architecture
Istanbul Technical University - Department of Interior Architecture (Istanbul, Turkey)
2023/02/27 Moderator - Second "Think and Do" session on the NEB Academy New European Bauhaus @ CERN
CERN IdeaSquare Event (Geneve, Switzerland)
2022/11/19 Roundtable: Architecture in the Age of Artificial Intelligence Digital Futures Talks - Architecture in the Age of Artificial Intelligence
Digital Futures
2022/10/27 Nova Bauhaus Europeia - projectos inspiradores Fórum Arquitectura e Paisagem. Sessão 05 - Olhares de fora. Ao encontro da qualidade na Europa (online event)
PNAP, Política Nacional de Arquitectura e Paisagem, DGT, DGPC, OA, APAP (Portugal)
2022/10/13 Moderator: NEB - Beyond human ecosystem Aveiro Tech Week
Aveiro Municipality (Aveiro, Portugal)
2022/10/04 The Digital Factory Reasons Offsite
Casa da Arquitectura (Matosinhos, Portugal)
2022/09/26 Apresentação de João Reis - Conferência de Abertura do ano lectivo 2022/23 Sessão de abertura do ano lectivo 2022/23
Faculty of Architecture, University of Porto (FAUP) (Porto, Portugal)
2022/09/24 The cork effect 8th International Insulation Cork Conference
Amorim Cork Insulation + Centro Cultural de Belém (CCB) (Lisbon, Portugal)
2022/09/15 Democratizing stereotomic construction through AR technologies. A reusable mold methodology to the production of customized voussoirs using HoloLens eCAADe 2022 - Co-creating the Future: Inclusion in and through Design
KU Leuven, Gent (Gent, Belgium)
2022/08/31 The Question of Housing in the scope of the NEB goes South (NEBgS) EAAE 2022 Conference - Towards a New European Bauhaus
Universidad Politécnica de Madrid (UPM), ETS de Arquitectura de Madrid (ETSAM) (Madrid, Spain)
2022/06/16 Wrap-up of the "Looking forward" panel discussion CA2RE Conference - Collective evaluation of artistic and design-driven doctoral training (online event)
ELIA + EAAE European Association for Architecture Education
2022/06/06 Moderator: Beautiful, sustainable, together. What on Earth is this NEB? New European Bauhaus Festival
New European Bauhaus / Gare Maritime (Brussels, Belgium)
2022/05/26 New European Bauhaus 5ª Semana da Economia de Braga
University of Minho + DST group (Braga, Portugal)
2022/05/03 Formação - Da linha ao círculo. Análise da Sustentabilidade na Arquitetura e Construção Formação - Da linha ao círculo. Análise da Sustentabilidade na Arquitetura e Construção
Ordem dos arquitectos (Portugal)
2022/04/28 Roundtable: European New Bauhaus - How to change a construction syllabus REBUILD 2022 - Transformando la edificación
REBUILD, IFEMA (Madrid, Spain)
2022/04/23 Geometria e Arquitectura na FAUP Mostra UP
Universidade do Porto (Gondomar, Portugal)
2022/04/09 O modelo digital e a investigação histórica Apresentação do Projecto FCT Santa Cruz
Universidade de Coimbra, Faculdade de Ciências e Tecnologia, DArq (Coimbra, Portugal)
2022/03/24 The DFL - Research and Education Reception of UC Berkeley at FAUP
Faculdade de Arquitectura da Universidade do Porto (FAUP) + UC Berkeley (Porto, Portugal)
2022/02/26 Tecnologia digital em arquitectura Formação - Da linha ao círculo. Análise da Sustentabilidade na Arquitetura e Construção
Ordem dos arquitectos (Portugal)
2022/02/23 Robotic experimentations at DFL (videoconference) LAMO Sessions
LAMO, Faculdade de Arquitectura e Urbanismo da Universidade Federal do Rio de Janeiro (FAU UFRJ) (Rio de Janeiro, Brazil)
2021/11/29 Roundtable - Novo Bauhaus Europeu: Cidades sustentáveis, belas e inclusivas. Workshop Novo Bauhaus Europeu: Cidades Sustentáveis (New European Bauhaus Workshop: Sustainable Cities)
Direcção-Geral do Território (DGT) (Lisbon, Portugal)
2021/11/18 Roundtable: Smart Cities. Buildings - transforming the past. Portugal Smart Cities Summit 2021 - Fundação AIP
FIL, International Fair of Lisbon (Lisbon, Portugal)
2021/10/21 Roundtable: O Novo Bauhaus Europeu. Aproximar o Green Deal da vida das pessoas. Portugal Mobi Summit 2021
Global Media Group, EDP, CEiiA (Cascais, Portugal)
2021/10/16 Tecnologia digital em arquitectura Formação - Da linha ao círculo. Análise da Sustentabilidade na Arquitetura e Construção
Ordem dos arquitectos (Portugal)
2021/10/06 Construção e Economia Circular Ciclo de Conferências 2021 - Competitividade, Sustentabilidade e Resiliência na Construção
Tektónica 2021 - Feira Internacional da Construção (Lisbon, Portugal)
2021/09/28 Talk sobre a New European Bauhaus Conferência sobre o Futuro da Europa - Feira Virtual de Cidadania Europeia
Europe Direct Baixo Alentejo (Portugal)
2021/09/23 The New European Bauhaus y la formación hacia la sostenibilidad, digitalización e industrialización REBUILD 2021 - Transformando la Edificación
Madrid IFEMA / REBUILD (Madrid, Spain)
2021/09/15 Roundtable: Getting involved in the New European Bauhaus New European Bauhaus: Get Involved
PERIN, Portugal in Europe Research and Innovation Network + ANI Agência Nacional de Inovação (Portugal)
2021/09/10 eCAADe and the New European Bauhaus + Roundtable eCAADe 2021 - Towards a new, configurable architecture
University of Novi Sad (Novi Sad, Serbia)
2021/08/26 How the New European Bauhaus can contribute for a more sustainable built environment European Forum Alpbach 2021 - CLimate and Energy Fund - Green Deal and the City
European Forum Alpbach (Alpbach, Austria)
2021/07/21 New European Bauhaus. Desafios, aprendizagens e estratégias para um ambiente construído mais sustentável Sustainable Living Innovators - 2021
CEiiA - Centro de Engenharia e Desenvolvimento (Matosinhos, Portugal)
2021/06/28 Materials and design for circularity - Roundtable moderation Bauhaus for Circularity
INL - Iberian Nanotechnology Laboratory (Braga, Portugal)
2021/06/09 Como é que a New European Bauhaus pode promover um ambiente construído mais sustentável? From Bauhaus to the New House - CEPA 2021 - European Conference of Architectural Policies
Ordem dos Arquitectos / Fundação Calouste Gulbenkian (Portugal)
2021/06/07 NEB Goes South - Roundtable moderation and Wrap-up conclusions NEB Goes South - Kick Off Event
University of Porto, Faculty of Architecture (Porto, Portugal)
2021/05/20 Bauhaus of the Sea Conference - Summary of the Roundtable Discussions Bauhaus of the Sea Conference
MAAT, Museu de Arquitectura, Arte e Tecnologia (Lisbon, Portugal)
2021/04/30 How the New European Bauhaus can foster a sustainable built environment EUROCITIES - Climate Forum
EUROCITIES + Covenant of Mayors for Climate & Energy (Guimarães, Portugal)
2020/11/02 (digital) experimentation at the DFL
University of Sydney, Faculty of Architecture, Design and Planning (Australia)
2020/06/04 Some thoughts and experiments on the new cybernetic-digital architectural design BIODIG 2020 - Conference for BIodigital Architecture and Genetics
ESARQ, Universitat Internacional de Catalunya (Barcelona, Spain)
2020/02/22 3D modeling and visualization of the theatre drawings of Filippo Juvarra International Colloquium: Filippo Juvarra - Domenico Scarlatti an the role of women in the promotion of Opera and Theatre in Portugal
Fundacao Calouste Gulbenkian (Lisbon, Portugal)
2019/10/19 Digital fabrication. Experiments at DFL/FAUP Ciclo de Conferências - Gravitações,
Mordavaga (Portugal)
2019/10/02 Digital fabrication and wood. Opportunities and experiments Digital fabrication with Wood
FINSA (Portugal)
2019/07/18 Robótica na Arquitectura. A experiência do DFL ISEP BIM Summer School
ISEP (Portugal)
2019/05/17 Projecto e Construção 4.0 – A experiência do DFL/FAUP Let’s Talk
360 Tech Industry Fair, Exponor (Portugal)
2019/03/06 Research by design. Experiences in education and research at FAUP/DFL Making Architecture: Dialogues between Oslo and Porto
FAUP, University of Porto (Porto, Portugal)
2019 From drawing to computation. On the role of geometry in architecture in the digital age Diderot Mathematical Forum: Mathematics and Architecture
University of Porto + Praha + Helsinki
2018/10/15 Architectural Research on Cork, Robotics and 3D Printing Design Studio Guest Lecture (Skype)
Rhode Island School of Design, RISD (Providence, United States)
2018/09/29 Endless Innovation. Researching Cork in Architecture 7th International Insulation Cork Conference
Amorim Isolamentos / CCB, Centro Cultural de Belém (Lisbon, Portugal)
2018/09/21 Mass-customization of Joints for Non-Standard Structures through Additive Manufacturing eCAADe Conference 2018 – Computing for a Better Tomorrow
Lodz University of Technology (Lodz, Poland)
2018/09/19 A Robotically Fabricated Connection System: a Possible Solution for a Free-Form “Robo-Web” Gridshell which takes inspirations from English Fan Vaulted Cathedrals eCAADe Conference 2018 – Computing for a Better Tomorrow
Technology University of Lodz (Lodz, Poland)
2018/07/06 Calculated Geometries. Design, Research and Teaching Experiments (Keynote) Mogeometrija 2018 - 6th International Conference on Geometry and Graphics
Faculty of Technical Sciences, University of Novi Sad (Novi Sad, Serbia)
2018/05/17 Personalização da Cortiça em Arquitectura através de Tecnologias Digitais Tektonica 2018 Construction Fair
International Fair of Lisbon (FIL) (Lisbon, Portugal)
2018/02/15 Personalização da Cortiça em Arquitectura através de Tecnologias Digitais Congresso Luso-Brasileiro de Materiais de Construção Sustentáveis
Department of Mathematics, University of Coimbra (Coimbra, Portugal)
2018 O Ensino da Geometria no MIArq da FAUP Geometria – Práticas no Ensino da Arquitectura
University of Coimbra (Coimbra, Portugal)
2017/11/10 Robotic Fabrication in Architecture. The DFL experience Guest Lectures
NYIT, New York Institute of Technology (Old Westbury, NY, United States)
2017/11/06 Architectural research on cork & robotic fabrication Lunch Talk Time Series
RPI, Ressenlaer Polytechnic Institute (Troy, NY, United States)
2017/11 Calculated Geometries: From manual to digital experiments in Architectural research and education SCDC Lectures
Stuckeman School, Penn State University (State College, PA, United States)
2017/10/16 Ceramic Tile. “What do you want to be?” Ceramic Tile. “What do you want to be?”
Revigres, Hotel Tivoli (Lisbon, Portugal)
2017/05/09 Robotics in Architecture. Research at the DFL nternational Colloquium. Architecture and Identity
ISCTE-IUL (Lisbon, Portugal)
2016/09/23 The DFL. Paths for innovation and collaboration BD Credai Pune Metro - Business Meeting
BD Credai Pune Metro - Sheraton Hotel Lisbon (Lisbon)
2016/07/07 Fabricação robótica na Arquitectura Archi Summit 2016
Archi Summit, Edifício do antigo Matadouro do Porto (Porto, Portugal)
2016/03/03 Robotic technologies for non-standard design and construction in architecture. The case of cork. Green Business Week
FIL Congress Center of Lisbon (Lisbon, Portugal)
2016/01/28 Experiências Digitais; Realidades Materiais Ciclo de Conferências - Espaços Comuns
Universidade Lusófona do Porto (Porto, Portugal)
2015/07/05 Fair faced cork. New technologies and applications of cork in architecture International Workshop on Cork¿
University of Lisbon, Faculty of Architecture (Lisbon, Portugal)
2013/09 Digital fabrication with(out) digital fabrication 3rd International Workshop: Digital Fabrication applied to contemporary Design and Architecture
University of São Paulo, Faculty of Architecture and Urbanism (FAU USP) (Sao Paulo, Brazil)
2013 Contributions of the Digital for Teaching the Design Studio 3rd International Workshop: Digital Fabrication applied to contemporary Design and Architecture
University of São Paulo, Faculty of Architecture and Urbanism (FAU USP) (Sao Paulo, Brazil)
2012/09 igital Experiments; material realities. Practice, research and education 2nd International Workshop: Digital Fabrication applied to contemporary Design and Architecture
University of São Paulo, Faculty of Architecture and Urbanism (FAU USP) (Sao Paulo, Brazil)
2011/09 1st International Workshop: Digital Fabrication applied to contemporary Design and Architecture University of São Paulo, Faculty of Architecture and Urbanism (FAU USP=
University of São Paulo, Faculty of Architecture and Urbanism (FAU USP) (Sao Paulo, Brazil)
2011/03/13 J.P.Sousa. Recent Work PechaKuchaNight Porto V.4
Municipal Library of Porto (Porto, Portugal)
2009/04/27 7x7 Crossing notes on architectural installation projects ESAD Lecture Series
ESAD, Superior School of Art and Design (Matosinhos, Portugal)
2007/12/11 Computation and Materiality – Recent work by ReD Lecture Series
Hong Kong University, Department of Architecture (Hong Kong, Hong Kong SAR China)
2007/09/24 Computation and Materiality – Recent work by ReD
IAAC, Institute for Advanced Architecture in Catalonia (Barcelona, Spain)
2006/04/28 Computation and Materiality – Recent work by ReD Lecture Series
Clemson University, School of Architecure (Clemson, SC, United States)
2005/10/26 Recent Work by ReD Recent work by ReD
MAK Center, LA Forum (Los Angeles, CA, United States)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2024 - Current Do Artesão à Máquina. A construção modular em madeira a partir da obra de Carlos Castanheira / From Craftsman to Machine. Modular construction in wood based on the work of Carlos Castanheira
Co-supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2024 - Current A evolução da construção em altura em madeira / The evolution of high-rise timber construction
Co-supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2024 - Current Arquitectura a 220 mm/s - prácticas modulares em 3DCP / Architecture at 220 mm/sec - Modular practices in 3DCP
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2024 - Current Entre o Projeto e a Execução. Um resposta concreta às exigências da promoção inclusiva de Habitação do século XXI / Between Project and Execution. A concrete response to the demands of inclusive promotion of 21st century Housing
Co-supervisor of Ana Sofia Santana Ribeiro Loureiro
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2024 - Current 3D Printing for sustainable design and construction of affordable housing. Technology and methodology in the Portuguese context.
Supervisor of Marco André da Silva Rosa
 Architecture (PhD)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - Current Sistematização, automação e inteligência artificial. Condições emergentes para a prática da arquitectura / Sistematization, automation and artificial intelligence. Emerging conditions for architectural practice
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - Current Modularidade e variação digital. Uma abordagem computacional à arquitetura modular / Modularity and digital variation. A computational approach to modular construction
Supervisor of Nuno Alexandre Carmezim Xavier
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - Current Fotogrametria e arquitectura / Photogrametry and architecture
Co-supervisor of Francisco Scotti Campos Belo Afonso
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - Current Arquiteto, BIM e os desafios atuais. Uma reflexão a partir de uma experiência profissional / The Architect, BIM and current challenges. A reflection from a professional experience.
Supervisor of Tiago Tasca Mendes
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2022 - Current Transformações geométricas de projecto: Três obras de Bjarke Ingels Group (BIG) / Geometric transformations in design: three works by Bjarke Ingels Group (BIG)
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2020 - Current Energy, Materials and Health in regenerative processes of common architecture for Sustainable Cities
Supervisor
 Architecture (PhD)
Universidade do Porto Faculdade de Arquitectura, Portugal
2019 - Current Continuous forms in architecture originated by digital emergent systems
Co-supervisor of Joana Pinho da Costa
 Biodigital Architecture (PhD)
Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
2019 - Current O impacto da fabricação digital como metodologia no contexto da prática de projecto
Co-supervisor of Daniela Silva
 Architecture (PhD)
ISCTE-Instituto Universitário de Lisboa Escola de Tecnologias e Arquitectura, Portugal
2015 - Current Digital design and constructive possibilities with brick departing from the work of Raul Hestnes Ferreira
Supervisor of Rui Miguel dos Santos Oliveira
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2011 - 2024 Tectonics and material transformations. Exploring concrete in architecture through the use of digital fabrication processes – form, texture and porosity.
Supervisor of Pedro Martins
 Arquitectura (PhD)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - 2023 Neurociência, inteligência artificial e a criatividade na arquitetura / Neuroscience, artificial intelligence and creativity in architecture
Supervisor of Luisa Alvim Figueiredo
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2022 - 2023 Arquitectura fotorealista / Photorealistic architecture
Co-supervisor of Mateus Santana Pimenta
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2022 - 2023 (Post-Doctoral Research) Projecto arquitectónico orientado por dados sociológicos para habitação de baixo custo. De métodos analógicos a métodos digitais / Architectural design guided by sociological data for low-cost housing. From analogue methods to digital methods
Supervisor of Igor Lacroix
 Architecture (Other)
Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal
2021 - 2023 Arquitetura em cartão: linguagem e tecnologia / Architecture with cardboard: linguagem e tecnologia
Supervisor of Vasco Moreira da Silva Calheiros
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2021 - 2023 Smart Cities. A interferência do digital no planeamento e experiência / Smart cities. The digital interference in the planning and experience
Supervisor of Nuno Rangel Gameiro
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2021 - 2022 Arquitetura (in)tangível: da representação ao metaverso / (In)tangible Architecture: from representation to the metaverse.
Supervisor of Isabella Cristina de Farias Goulart
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2021 - 2022 Realidade virtual e arquitetura. A experimentação do não construído: ensaio sobre o Restaurante da Piscina de Marés (1965 - 1995) por Álvaro Siza / Virtual reality and architecture. The experimentation of the unbuilt: essay on the Piscina de MArés restaurant (1965-1995) by Álvaro Siza
Supervisor of Jonas Carlos de Oliveira Barbosa
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2020 - 2022 Supra-Arquitetura: Influências da inteligência artificial na arquitetura / Supra-architecture: Influences of Artificial intelligence in architecture)
Supervisor of Beatriz da Silva Rosendo
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2020 - 2022 Analogico vs digital. Especificidades e complementaridades a partir de uma experiência pessoal. / Analogic vs digital. Specificities and complementarities from a personal experience.
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2020 - 2021 (Post-Doctoral Research) Advanced Applications of Digital Fabrication in Architectural Education in the Context of Flexibility
Supervisor of Orkan Zeynel Gu¨zelci
Universidade do Porto Faculdade de Arquitectura, Portugal
2020 - 2021 Sobre a plasticidade na obra de Norman Foster: uma perspectiva digital / On the plasticity of Norman Foster's work: a digital perspective.
Supervisor of Ana Beatriz dos Santos Lacerda
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2017 - 2020 Digital Concrete. New materialization possibilities in contemporary architecture.
Co-supervisor of Eduardo Ignacio Lopes
 Arquitectura (PhD)
Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, Brazil
2014 - 2020 Reconstruction of a Stereotomy. For a Multi-Semantic Stereotomic Approach.
Supervisor of Pedro de Azambuja Varela
 Arquitectura (PhD)
Universidade do Porto Faculdade de Arquitectura, Portugal
2018 - 2019 Revestimento cerâmico em fachadas – o contributo do desenho e fabricação digital
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2017 - 2018 Projectar com o invisível: integrando desenho e performance no processo de projecto
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2017 - 2018 Reconstruir (n)o Nepal. Por entre as montanhas até à escola
Supervisor of Susana Ferreira
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2016 - 2018 Additive Fabrication. Emerging opportunities in Architecture
Supervisor of João Carvalho
 Arquitetura (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2016 - 2018 A caminho de uma arquitectura interactiva: da cibernética à inteligência artificial
Supervisor of Catarina Brites
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2016 - 2018 Arquitectura e realidade virtual
Supervisor of Gabriel Correia
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2016 - 2017 Cork and new digital technologies. Possibilities for application in ephemeral architecture.
Supervisor of Rafael Santos
Universidade do Porto Faculdade de Arquitectura, Portugal
2012 - 2016 Robotic fabrication in Architecture. Principles, processes and applications
Supervisor
 Architecture (Master)
2014 - 2015 Tradition and innovation: the use of digital technologies in the Serpentine Gallery 2005
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2014 - 2015 The Installation in the public space as a means to promote consciousness of environmental problems.
Supervisor
 Arte e Design para o Espaço Público (Master)
Universidade do Porto Faculdade de Belas Artes, Portugal
2013 - 2014 Architecture and customization. The impact of CADCAM technologies.
Supervisor of Manuel Oliveira
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2013 - 2014 Adaptive rigid roofs in Architecture. Possibilities for transformation and mobility.
Supervisor
 Architecture (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2021 - Current NEB Goes SOUTH - Kick-off Event - Launching the international platform of discussion and co-design the Southern European vision for New European Bauhaus. (2021/06/07)
Conference (Member of the Organising Committee)
 Universidade do Porto Faculdade de Arquitectura, Portugal

Universitat Politècnica de València Escuela Técnica Superior de Arquitectura, Spain

Sveucili¿te u Zagrebu Arhitektonski fakultet, Croatia

École nationale supérieure d'architecture de Toulouse, France

Università di Bologna, Italy

National Technical University of Athens - School of Architecture, Greece
2024/02/26 - 2024/11 Workshop - Printable morphologies. Harness the 3D printing potential of generative distinct forms. (2024/02/26 - 2024/03/11)
Workshop (Co-organisor)
 Istanbul Teknik Üniversitesi, Turkey
2022 - 2022 (Workshop) Drawing in Dialogue | A day of drawing and dialogue between The Bartlett School of Architecture and FAUP (2022/11/18 - 2022/11/18)
Workshop (Co-organisor)
 Universidade do Porto Faculdade de Arquitectura, Portugal

University College London Bartlett Faculty of the Built Environment, United Kingdom
2016/08/26 - 2019/09/13 The 37th eCAADe Conference and the XXIII SIGraDi Conference (Joint Event) - Architecture in the Age of the 4th Industrial Revolution (2019/09 - 2019/09/13)
Congress (Co-organisor)
 Universidade do Porto Faculdade de Arquitectura, Portugal

Education and Research in Computer-Aided Architectural Design in Europe (eCAADe), Belgium

Sociedade Iberoamericana de Gráfica Digital (SIGraDi), Brazil
2013/04/04 - 2013/04/05 Future Traditions. Rethinking traditions and envisioning the future in architecture through the use of digital technologies. The 1st eCAADe Regional International Workshop. (2013/04/04 - 2013/04/05)
Congress (Co-organisor)
 Universidade do Porto Faculdade de Arquitectura, Portugal

Education and Research in Computer-Aided Architectural Design in Europe (eCAADe), Belgium

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2016 - 2016 Short Course - KUKA Programming Level 1
Other
Kuka Robots Iberica - Portugal, Portugal

ESI - Engenharia, Soluções e Inovação, Portugal
2016 - 2016 Workshop - Interactive 3D Printing
Workshop
 Rob|Arch2016 Conference
The University of Sydney School of Architecture Design and Planning, Australia

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2024/02/15 Biomódulo Bimetal:módulo cinético bioinspirado para fachadas adaptativas
(Thesis) Arguer
 Tarciana Araújo Brito de Andrade (PhD)
Universidade de Lisboa Faculdade de Arquitectura, Portugal

Universidade Federal de Pernambuco, Brazil
2024 Biomódulo Bimetal:módulo cinético bioinspirado para fachadas adaptativas.
(Thesis) Arguer
 Tarciana Araújo Brito de Andrade (PhD)
Universidade de Lisboa Faculdade de Arquitectura, Portugal

Universidade Federal de Pernambuco, Brazil
2023/10/25 The hidden geometry of the architecture of Herzog & de Meuron. Digital tools and design practice
(Thesis) Arguer
 Alexandra Castro (PhD)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023/09/28 Arquitectura doméstica em diálogo. O papel da colonização portuguesa na forma de construir e habitar o espaço doméstico contemporâneo na Guiné-Bissau.
President of the jury
 Francesca Vita (PhD)
Universidade do Porto Faculdade de Arquitectura, Portugal
2023/03/21 An algorithmic Framework for the design, optimization and fabrication of facades
(Thesis) Arguer
 Inês Alexandra do Côrro Caetano (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02/15 Open reWall: Survey-to-Production Workflow for Building Renovation
(Thesis) Arguer
 Filipe Brandão (PhD)
ISCTE-Instituto Universitário de Lisboa Centro de Investigação em Ciências da Informação Tecnologias e Arquitetura, Portugal
2022/07/20 (PhD Thesis project) Mass customisation of the domestic space through affordable and sustainable modular construction
(Thesis) Arguer
 Carolina Martín (PhD)
ISCTE-Instituto Universitário de Lisboa Centro de Investigação em Ciências da Informação Tecnologias e Arquitetura, Portugal
2022/04/18 O sistema modular como paradigma de reabilitação. Aplicação à casa burguesa do Porto.
(Thesis) Main arguer
 Catarina Sofia Meireles da Silva (Master)
Universidade Fernando Pessoa, Portugal
2021/07/06 Memórias e experiências do espaço: Práticas fotográficas na Arquitectura.
President of the jury
 Inês Lourenço Azevedo (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2021/06/04 Distância entre Conhecimento e Experiência. A pertinência de Inception no ensino de Arquitectura
(Thesis) Main arguer
 Jorge Louro de Almeida (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2020/12/14 Mind, Tool & Matter. Synergies in digital fabrication and bamboo craftmanship.
(Thesis) Main arguer
 Ricardo Assis Rosa (PhD)
Oxford Brookes University School of Architecture, United Kingdom
2020/11/09 Projecto baseado em energia: projecto digital de envelopes de edifícios
(Thesis) Arguer
 Daniel Mateus (PhD)
Universidade Autónoma de Lisboa Departamento de Arquitectura, Portugal
2020/07/10 Green roofs containing Insulation Cork Board. Design and Characterization.
(Thesis) Arguer
 Ricardo Alexandre Santos Almeida (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 A rejeição do real ou o pós-digital como caso de estudo.
(Thesis) Main arguer
 Rita Sampaio Brandão de Sá (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2019 Plataforma digital de arquitectura: o repensar da tradição e promoção da arquitectura através do uso das novas tecnologias
(Thesis) Main arguer
 Lucas Rafael Belinha Pereira (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2019 Casa de guarda-florestal – património em risco.
President of the jury
 David Nuno Correia Rodrigues (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2019 Viagem ao princípio do mundo
President of the jury
 Bruna Costeira Ruela (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2019 Brasão de la Espada – proposta de expansão e requalificação de uma unidade fabril.
President of the jury
 Jorge Fernando Moreira Monteiro (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2018 Do virtual, a experiência da simulação em arquitectura.
(Thesis) Main arguer
 Gonçalo Oliveira (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2018 What I’m going to do with this house? A rehabilitation in Leiria
President of the jury
 Cláudia Inês Pedrosa (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2018 Designing the invisible: a space for contemplation in the Scandinavian Landscape
President of the jury
 Eunice Isabel Soares (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2018 Entrelaçar / cestaria Portuguesa: intersecções entre artesanato e arquitectura
President of the jury
 Natacha Filipa Batista (Master)
Universidade do Porto Faculdade de Arquitectura, Portugal
2017/12/17 Industrial Applicability of Single Point Incremental Forming: Functional and Energetic Approach
(Thesis) Arguer
 Daniel Gil Afonso (PhD)
Universidade de Aveiro, Portugal
2017 Prototyping models for climate change
(Thesis) Arguer
 Katherine Dunn (PhD)
University of New South Wales, Australia
2017 Natural processes applied to Architecture through Computation
(Thesis) Main arguer
 Diego Navarro (PhD)
Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
2017 Tower-House in the Italian Hills. Rehabilitation project of an historical structure
President of the jury
 Cristiana Belloni (Master)
2016 Shape grammar of the Alberti’s system of Column
(Thesis) Arguer
 Filipe Coutinho (PhD)

Committee member

Activity description
Role 		Institution / Organization
2024 - Current Local Committee for Continuous Improvement at FAUP (Comissão Local para a Melhoria Contínua)
Member
 Universidade do Porto Faculdade de Arquitectura, Portugal
2024 - Current Comissão de Acompanhamento da Revisão do Plano de Estudos de MIArq (Commission for Monitoring the Revision of the Curriculum of the MIArq)
Member
 Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - Current Executive Board - Faculty of Architecture, University of Porto (2nd mandate)
Member
 Universidade do Porto Faculdade de Arquitectura, Portugal
2019 - Current Council Member of eCAADe - Association for Education and Research in COmputer-Aided Architectural Design in Europe
Member
 Education and Research in Computer-Aided Architectural Design in Europe (eCAADe), Belgium
2018 - Current Continuum Education Course - Training in ArchiCAD
Coordinator
 Universidade do Porto Faculdade de Arquitectura, Portugal
2013 - Current Research Group - Digital Fabrication Laboratory (DFL)
Coordinator
 Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal

Universidade do Porto Faculdade de Arquitectura, Portugal
2011 - Current Scientific Council - Center for Studies in Architecture and Urbanism
Member
 Centro de Estudos em Arquitectura e Urbanismo (CEAU), Portugal

Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - 2024 Local Committee for Continuous Improvement at FAUP (Comissão Local para a Melhoria Contínua)
Member
 Universidade do Porto Faculdade de Arquitectura, Portugal
2019 - 2023 Scientific Committee - Doctoral Program in Architecture
Member
 Universidade do Porto Faculdade de Arquitectura, Portugal
2019 - 2023 Executive Board - Faculty of Architecture, University of Porto (1st mandate)
Member
 Universidade do Porto Faculdade de Arquitectura, Portugal
2012 - 2015 Advanced Studies Program in Digital Architecture
Director
 Universidade do Porto Faculdade de Arquitectura, Portugal

ISCTE-Instituto Universitário de Lisboa Escola de Tecnologias e Arquitectura, Portugal
2012 - 2013 Informatics Center
Director
 Universidade do Porto Faculdade de Arquitectura, Portugal
2011 - 2013 Research Group - Architecture: Theory, Design and History (ATPH)
Member
 Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal

Universidade do Porto Faculdade de Arquitectura, Portugal

Conference scientific committee

Conference name Conference host
2020 - Current eCAADe 2020 - Anthropologic Architecture and Fabrication in the Cognitive Age TU Berlin
2019 - Current S2M – Smart and Sustainable Manufacturing Conference The University of Manchester
2019 - Current UDESIGN: Industria del Futuro Universidad de Monterrey, Mexico
2019 - Current eCAADe SIGraDi 2019 - Architecture in the Age of the 4th Industrial Revolution FAUP, University of Porto
2018 - Current ACADIA 2018 – Recalibration: on imprecision and infidelity Universidad Iberoamericana, Cidade do México
2018 - Current UHWB 18 – Urban Health & Wellbeing Building Collaborative Intelligence for Better Lives in Cities Beirut Arab University, Lebanon
2018 - Current CAADRIA 2018 – Computer Aided Architectural Design Research in Asia Tshingua University + DADA, Beijing
2018 - Current eCAADe RIW 2018 – eCAADe Regional Internation Simposium University of Cyprus
2018 - Current PTBIM 2, 2o Congresso Português de Building Information Modeling University of Minho, Portugal
2018 - Current RCA 2018 – Research Culture in Architecture Technical University of Kaiserslautern
2018 - Current SIGraDi 2018 – Sociedad Iberoamericana de Gráfica Digital, Universidade de São Paulo, São Carlos, Brasil.
2023 - 2023 eCAADe 2023 - Digital Design Reconsidered Graz University of Technology (Austria)
2022 - 2022 eCAADe 2022 - Co-creating the Future: Inclusion in and through Design KU Leuven, Gent (Belgium)
2021 - 2021 eCAADe 2021 - Towards a New, Configurable Architecture University of Novi Sad (Serbia)
2018 - 2018 eCAADe 2018 - Computer for a Better Tomorrow Lodz University of Technology

Consulting

Activity description Institution / Organization
2022/10 - Current digiNEB.eu, Digital Ecosystem for the New European Bauhaus (ref: 101083743) - Member of the External Advisory Group
2021/12 - Current Comissão Técnica para a Transição Digital - Ordem dos Arquitectos Ordem dos Arquitectos, Portugal
2018 - 2018 Consulting (DFL) and development of a 1:1 digitally fabricated model of a car for Behind company in the scope of a collaboration with Bosch. BEHIND, Portugal
2017 - 2018 Consulting on digital design and fabrication systems for a Portugal 2020 project developed by Amorim Insulation Cork and ITeCons on the topic of "gren roof systems using cork as a substracte". Amorim Insulation Cork, Portugal

Instituto de Investigação e Desenvolvimento Tecnológico para a Construção Energia Ambiente e Sustentabilidade, Portugal

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2021 - Current Architecture, Project and Digital Technologies Architecture (Doutoramento) Universidade do Porto Faculdade de Arquitectura, Portugal
2018 - Current Continuum Education Course - Training in ArchiCAD (Outros) Universidade do Porto Faculdade de Arquitectura, Portugal
2011/09 - Current Constructive Geometry 1 Arquitetura (Mestrado integrado) Universidade do Porto Faculdade de Arquitectura, Portugal
2011/09 - Current Geometry and Architecture Arquitetura (Mestrado integrado) Universidade do Porto Faculdade de Arquitectura, Portugal
2011/09 - Current Constructive Geometry 2 Arquitetura (Mestrado integrado) Universidade do Porto Faculdade de Arquitectura, Portugal
2013/02 - 2015/06 Research Studio in Digital Architecture Advanced Studies Program in Digital Architecture (Pós-Graduação) Universidade do Porto Faculdade de Arquitectura, Portugal

ISCTE-Instituto Universitário de Lisboa Escola de Tecnologias e Arquitectura, Portugal
2013/02 - 2015/06 Performative Architecture Advanced Studies Program in Digital Architecture (Pós-Graduação) Universidade do Porto Faculdade de Arquitectura, Portugal

ISCTE-Instituto Universitário de Lisboa Escola de Tecnologias e Arquitectura, Portugal
2012/09 - 2015/01 Digital Fabrication Advanced Studies Program in Digital Architecture (Pós-Graduação) Universidade do Porto Faculdade de Arquitectura, Portugal

ISCTE-Instituto Universitário de Lisboa Escola de Tecnologias e Arquitectura, Portugal
2012/09 - 2015/01 Research Methods in Digital Architecture Advanced Studies Program in Digital Architecture (Pós-Graduação) Universidade do Porto Faculdade de Arquitectura, Portugal

ISCTE-Instituto Universitário de Lisboa Escola de Tecnologias e Arquitectura, Portugal
2009 - 2014 Architecture and Digital Project 2 Mestrado Integrado em Arquitectura (Mestrado integrado) Universidade de Coimbra Departamento de Arquitectura, Portugal
2009 - 2014 Architectural and Digital Project 2 Mestrado Integrado em Arquitectura (Mestrado integrado) Universidade de Coimbra Departamento de Arquitectura, Portugal
2011 - 2012 Digital Fabrication Master in Advanced Architecture (Master) Institut d'Arquitectura Avançada de Catalunya, Spain
2009 - 2011 Constructive Geometry Arquitetura (Mestrado integrado) Universidade do Porto Faculdade de Arquitectura, Portugal
2009 - 2011 Geometry Arquitetura (Mestrado integrado) Universidade do Porto Faculdade de Arquitectura, Portugal
2008 - 2008 Design Studio: Digital Tectonics Master in Advanced Architecture (Master) Institut d'Arquitectura Avançada de Catalunya, Spain
2007 - 2008 Digital Technologies in Architecture: Principles and Applications Master in Advanced Architecture (Master) Institut d'Arquitectura Avançada de Catalunya, Spain
2006 - 2007 Digital Technologies in Architecture: Principles and Applications Post-Graduation in Digital Tectonics (Postgraduate Certificate) Institut d'Arquitectura Avançada de Catalunya, Spain
2004 - 2004 Geometry Arquitectura (Graduado) Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
2003 - 2003 Design Studio - Parametric CAD/CAM Master in Genetic Architectures (Master) Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
1999 - 2001 Computer Aided Design 1 Arquitectura (Licenciatura) Universidade do Porto Faculdade de Arquitectura, Portugal
1999 - 2001 Computer Aided Design 2 Arquitectura (Licenciatura) Universidade do Porto Faculdade de Arquitectura, Portugal

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2023 - Current External Expert in Architecture, design and urbanism - FCT Call for PhD Scholarships 2023
Evaluator
 Fundação para a Ciência e a Tecnologia, Portugal Fundação para a Ciência e a Tecnologia

Interview (newspaper / magazine)

Activity description Newspaper / Forum
2021/06/16 Investigadores U.Porto - Jose Pedro Sousa. Membro da New European Bauhaus Science @ U.Porto - Newsletter
2021/03/17 Professor da FAUP contribui para o Novo Bauhaus Europeu JPN - Jornalismo Porto Net

Interview (tv / radio show)

Program Topic
2021/04/22 - 2021/04/22 Europa Consigo Sobre o movimento da New European Bauhaus
2021/03/14 - 2021/03/14 U.Porto Cultura - Casa Comum - Em Off Jose Pedro Sousa – sobre a New European Bauhaus (#5)

Journal scientific committee

Journal title (ISSN) Publisher
2018 - Current Creative Sustainable Development Journal Beirut Arab University
2018 - Current Automation in Construction Elsevier
2018 - Current NEXUS Network Journal Springer
2017 - Current Architecture & Planning Journal Beirut Arab University, Lebanon
2011 - Current Revista PARC– Pesquisa em Arquitectura e Construção University of Campinas, Department of Architecture and Construction, Brazil

Other jury / evaluation

Activity description Institution / Organization
2019/05/28 - Current Jury of Academic Promotion of Dr. Kate Dunn University of New South Wales, Australia
2012 - Current Juri of the Special Call for graduates in other fields for access to the Integrated Master in Architecture (MIArq). Responsible of the geometry / representation exam Universidade do Porto Faculdade de Arquitectura, Portugal
2023 - 2023 President of the Jury - Sustainability and Research Prizes 2023 - (Research category) Ordem dos Arquitectos, Portugal
2023 - 2023 President of the Jury - Recruitment and selection of a Senior Technician for the Academic and International Services of the FAUP (Pr. 26) Universidade do Porto Faculdade de Arquitectura, Portugal
2022/07/01 - 2022/07/01 Design Critic - Master in Bio-Integrated Design (BIO ID), Studio by Prof.s Marcos Cruz and Brenda Parker University College London Bartlett School of Graduate Studies, United Kingdom
2022/05/26 - 2022/05/26 PhD Thesis Critic - 7ª Edição do Colóquio Arquitectura dos Territórios Metropolitanos ISCTE-Instituto Universitário de Lisboa Centro de Investigação em Ciências da Informação Tecnologias e Arquitetura, Portugal
2022/03/28 - 2022/03/28 Design Critic - Master in Advanced Architecture, Thesis Studio by Profs. Marcos Cruz and Ricardo Mayor Institut d'Arquitectura Avançada de Catalunya, Spain
2022 - 2022 Jury of the ptBIM Dissertation Award - Architecture 4th Portuguese Congress "Building Information Modeling" - ptBIM 2022, Portugal
2021/06/25 - 2021/06/25 Design Critic - Master in Biodigital Architecture - Alberto T. Estévez Studio, Universitat Internacional de Catalunya - Escola Superior d'Arquitectura, Spain
2020 - 2020 Jury of the 30th Edition - Building Solutions with Pladur Competition - Selection from FAUP Consejo Superior de los Colegios de Arquitectos de España, Spain
Distinctions

Award

2018 Pedagogic Innovation Project Award
Universidade do Porto, Portugal
2017 Pedagogic Innovation Project Award
Universidade do Porto, Portugal
2009 Prémio Jovem Investigador UTL/CGD
Universidade de Lisboa, Portugal

Caixa Geral de Depositos, Portugal
2005 Far Eastern International Digital Architecture Design (FEIDAD) Award
Far Eastern Memorial Foundation of the Far Eastern Group, Taiwan
2002 Digital Design Media Student Competition
Association for Computer Aided Design in Architecture (ACADIA), United States

Title

2021 Member of the High-Level Roundtable and Community Ambassador of the New European Bauhaus
European Commission, Belgium