???global.info.a_carregar???
José Martins Ferreira. Concluiu o(a) Título de Agregado em Ciências da Engenharia Mecânica em 2000 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia e Doutoramento em Engenharia Mecânica em 1985 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia. É Professor Catedrático no(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia. Publicou 157 artigos em revistas especializadas. Possui 1 livro(s). Coorientou 4 tese(s) de doutoramento. Orientou 1 dissertação(ões) de mestrado e coorientou 17. Participa e/ou participou como Investigador responsável em 6 projeto(s). Atua na(s) área(s) de Ciências da Engenharia e Tecnologias com ênfase em Engenharia Mecânica com ênfase em Engenharia Mecânica.
Read full resume ↓
Identification

Personal identification

Full name
José Martins Ferreira
Date of birth
1953/03/23
Gender
Male

Citation names

  • Ferreira, José AM

Author identifiers

Ciência ID
981A-510D-0C8A
ORCID iD
0000-0002-0295-1841

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering
Education
Degree Classification
2000
Concluded
 Ciências da Engenharia Mecânica (Título de Agregado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1985
Concluded
 Engenharia Mecânica (Doutoramento)
Major in Outra:Construção Metalomecânica
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Aplicação da Mecânica da Fractura ao Estudo da Resistência a Fadiga de Juntas Soldadas" (THESIS/DISSERTATION)
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2002 - Current Full Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2016 - 2019 Full Professor (University Teacher) Universidade de Coimbra, Portugal
2013 - 2016 Full Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Positions / Appointments

Category
Host institution 		Employer
2016 - 2019 Conselho científico/técnico-científico ou orgão correspondente Universidade de Coimbra, Portugal
2016 - 2019 Coordenação ou direção de centro de investigação, departamento ou equivalente Universidade de Coimbra, Portugal
2015 - 2016 Conselho científico/técnico-científico ou orgão correspondente Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2016 Coordenação ou direção de centro de investigação, departamento ou equivalente Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Projects

Contract

Designation Funders
2018/06/22 - Current Comportamento à fadiga de componentes em ligas de titânio produzidas por fabricação aditiva
PTDC/EME-EME/28789/2017
Principal investigator
Ongoing
2018/07/26 - 2022/07/25 Produção de componentes para veículos aéreos não tripulados (UAVs) por manufatura aditiva
PTDC/EME-ESP/31296/2017
Universidade da Beira Interior, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/06/22 - 2022/06/21 Comportamento à fadiga de componentes em ligas de titânio produzidas por fabricação aditiva
PTDC/EME-EME/28789/2017
Universidade de Coimbra, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2016/06/01 - 2019/06/01 Melhoraria do comportamento mecânico de componentes funcionais híbridos obtidos por sinterização a laser
PTDC/EMS-PRO/1356/2014
Principal investigator
Concluded
2016/06/01 - 2019/06/01 Melhoraria do comportamento mecânico de componentes funcionais hibridos obtidos por sinterização a laser
PTDC/EMS-PRO/1356/2014
Universidade de Coimbra, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2013/07/01 - 2015/10/31 Análise da tolerância de dano em ligas leves aeronáuticas
PTDC/EMS-PRO/3148/2012
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/04/01 - 2014/03/31 Melhoria da resistência à fadiga de juntas soldadas MIG pós-processadas por fricção linear
PTDC/EME-PME/114605/2009
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Universidade de Coimbra Centro de Física, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/03/01 - 2013/12/31 Melhoramento das propriedades mecânicas de compósitos híbridos nano reforçados
PTDC/EME-PME/113695/2009
Principal investigator
Concluded
2011/03/01 - 2013/12/31 Melhoramento das propriedades mecânicas de compósitos híbridos nano reforçados
PTDC/EME-PME/113695/2009
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 285 - 2011-2012
PEst-C/EME/UI0285/2011
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2010/03/01 - 2012/12/31 Optimização das propriedades mecânicas de compósitos reforçados com “nanoclays” especialmente modificados
PTDC/EME-PME/103622/2008
Principal investigator
Concluded
2010/03/01 - 2012/12/31 OPTIMIZAÇÃO DAS PROPRIEDADES MECÂNICAS DE COMPÓSITOS REFORÇADOS COM “NANOCLAYS” ESPECIALMENTE MODIFICADOS
PTDC/EME-PME/103622/2008
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Universidade da Beira Interior, Portugal

Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Universidade de Coimbra Centro de Investigação em Engenharia dos Processos Químicos e dos Produtos da Floresta, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2008/01/01 - 2010/12/31 HISTWIN - Torres Eólicas Metálicas em Aço de Alta Resistência
PTDC/ECM/64217/2006
Universidade de Coimbra, Portugal

Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/05/01 - 2009/12/31 Ligação entre micro e macro escalas do comportamento mecânico de espumas sintácticas
PTDC/EME-PME/66549/2006
Universidade de Coimbra, Portugal

Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/04/01 - 2008/06/30 A SOLDADURA POR DEPOSIÇÃO LASER - UMA FERRAMENTA DE REPARAÇÃO DE MOLDES
POCI/EME/55918/2004
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2003/05/01 - 2006/12/31 Comportamento à fadiga e fluência de superligas de níquel sinterizadas
POCTI/EME/46195/2002
Principal investigator
Concluded
2000/09/01 - 2004/11/30 Comportamento à fadiga de componentes de estruturas leves sujeitas a carregamentos complexos
POCTI/EME/32984/2000
Principal investigator
Concluded
Outputs

Publications

Book
  1. Silva, H.; Ferreira, J.A.M.; Costa, J.D.M.; Capela, C.. Mixed mode interlaminar fracture of carbon nanotubes enhanced epoxy/glass fiber composites. 2014.
    10.4028/www.scientific.net/KEM.592-593.283
Book chapter
  1. Wojciech Macek; Ricardo Branco; Jaroslaw Trembacz; José Domingos Costa; J. A. M. Ferreira; Carlos Capela. "Three-Dimensional Fractography for Conventional and Additive Manufactured Steels After Bending-Torsion Fatigue". 127-135. Springer International Publishing, 2022.
    10.1007/978-3-030-91847-7_13
  2. R. Branco; J. D. Costa; J. A. M. Ferreira; C. Capela; F. Berto; W. Macek. "Multiaxial Fatigue Behaviour of SLM 18Ni300 Steel". 161-168. Springer International Publishing, 2022.
    10.1007/978-3-030-91847-7_16
Conference paper
  1. Mário Pereira; Paulo N. B. Reis; Miguel Silva; Martins Ferreira. "Stress Relaxation and Creep Behaviour of Material Jetting Parts". 2022.
    10.3390/materproc2022008097
  2. Santos, L.M.S.; Ferreira, J.A.M.; Costa, J.D.; Capela, C.. "Fatigue Performance of Hybrid Steel Samples with Laser Sintered Implants". 2016.
    10.1016/j.proeng.2016.08.874
  3. Ferreira, N.; Ferreira, J.A.M.; Antunes, P.V.; Costa, J.D.; Capela, C.. "Fatigue Crack Propagation in Shot Peened al 7475-t7351 Alloy Specimens". 2016.
    10.1016/j.proeng.2016.08.888
  4. Borrego, L.P.; Costa, J.D.; Ferreira, J.A.M.. "Crack Propagation of 7050 Aluminum alloy under Constant Amplitude Loading and Peak Overloads". 2015.
    10.1016/j.proeng.2015.08.112
  5. Borrego, L.P.; Costa, J.D.; Ferreira, J.A.M.. "Crack growth behavior of AA6082 and AA6061 aluminum alloys". 2014.
    10.1016/j.proeng.2014.06.245
  6. Borrego, L.P.; Ferreira, J.A.M.; Costa, J.D.M.. "Assessment of the fatigue behaviour on nanofilled epoxy composites". 2012.
Journal article
  1. Georgino C. G. Serra; José A. M. Ferreira; Paulo N. B. Reis. "Static and Fatigue Characterization of Adhesive T-Joints Involving Different Adherends". Processes (2023): https://doi.org/10.3390/pr11092640.
    10.3390/pr11092640
  2. Rui F. Fernandes; Joel de Jesus; Luís Borrego; Luís Vilhena; Amílcar Ramalho; José A. M. Ferreira. "Influence of Deposition Plane Angle and Saline Corrosion on Fatigue Crack Growth in Maraging Steel Components Produced by Laser Powder Bed Fusion". Metals 12 3 (2022): 433-433. https://doi.org/10.3390/met12030433.
    10.3390/met12030433
  3. Patricio G. Riofrío; Fernando Antunes; José Ferreira; António Castanhola Batista; Carlos Capela. "Fatigue Performance of Thin Laser Butt Welds in HSLA Steel". Metals (2021): https://doi.org/10.3390/met11101499.
    10.3390/met11101499
  4. Patricio G. Riofrío; Joel de Jesus; José A. M. Ferreira; Carlos Capela. "Influence of Local Properties on Fatigue Crack Growth of Laser Butt Welds in Thin Plates of High-Strength Low-Alloy Steel". Applied Sciences 11 16 (2021): 7346-7346. https://doi.org/10.3390/app11167346.
    10.3390/app11167346
  5. Luís Santos; Joel de Jesus; Luís Borrego; José A. M. Ferreira; Rui F. Fernandes; José D. M. da Costa; Carlos Capela. "Fatigue Behavior of Hybrid Components Containing Maraging Steel Parts Produced by Laser Powder Bed Fusion". Metals 11 5 (2021): 835-835. https://doi.org/10.3390/met11050835.
    10.3390/met11050835
  6. Joel de Jesus; Micael Borges; Fernando Antunes; José Ferreira; Luis Reis; Carlos Capela. "A Novel Specimen Produced by Additive Manufacturing for Pure Plane Strain Fatigue Crack Growth Studies". Metals 11 3 (2021): 433-433. https://doi.org/10.3390/met11030433.
    10.3390/met11030433
  7. Joel de Jesus; José António Martins Ferreira; Luís Borrego; José D. Costa; Carlos Capela. "Fatigue Failure from Inner Surfaces of Additive Manufactured Ti-6Al-4V Components". Materials (2021): https://doi.org/10.3390/ma14040737.
    10.3390/ma14040737
  8. Patricio G. Riofrío; José A. M. Ferreira; Carlos A. Capela. "Imperfections and Modelling of the Weld Bead Profile of Laser Butt Joints in HSLA Steel Thin Plate". Metals 11 1 (2021): 151-151. https://doi.org/10.3390/met11010151.
    10.3390/met11010151
  9. Hirulkar, N.S.; Jaiswal, P.R.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of hygrothermal aging and cyclic thermal shocks on the mechanical performance of single-lap adhesive joints". International Journal of Adhesion and Adhesives 99 (2020): 102584. http://dx.doi.org/10.1016/j.ijadhadh.2020.102584.
    10.1016/j.ijadhadh.2020.102584
  10. Ferreira, N.; Jesus, J.S.; Ferreira, J.A.M.; Capela, C.; Costa, J.M.; Batista, A.C.. "Effect of bead characteristics on the fatigue life of shot peened Al 7475-T7351 specimens". International Journal of Fatigue 134 (2020): 105521. http://dx.doi.org/10.1016/j.ijfatigue.2020.105521.
    10.1016/j.ijfatigue.2020.105521
  11. Luís M. Vilhena; Ahmad Shumayal; Amílcar Ramalho; José António Martins Ferreira. "Tribocorrosion Behaviour of Ti6Al4V Produced by Selective Laser Melting for Dental Implants". Lubricants 8 2 (2020): 22-22. https://doi.org/10.3390/lubricants8020022.
    10.3390/lubricants8020022
  12. Jesus, J. S.; Borrego, L. P.; Ferreira, J. A. M.; Costa, J. D.; Capela, C.. "Fatigue crack growth behaviour in Ti6Al4V alloy specimens produced by selective laser melting". International Journal of Fracture (2019): http://dx.doi.org/10.1007/s10704-019-00417-2.
    10.1007/s10704-019-00417-2
  13. Hirulkar, N.S.; Jaiswal, P.R.; Reis, P.N.B.; Ferreira, J.A.M.. "Bending strength of single-lap adhesive joints under hygrothermal aging combined with cyclic thermal shocks". The Journal of Adhesion (2019): 1-15. http://dx.doi.org/10.1080/00218464.2019.1681981.
    10.1080/00218464.2019.1681981
  14. Fernando Antunes; Luís Santos; Carlos Capela; José Ferreira; José Costa; Joel Jesus; Pedro Prates. "Fatigue Crack Growth in Maraging Steel Obtained by Selective Laser Melting". Applied Sciences 9 20 (2019): 4412-4412. https://doi.org/10.3390/app9204412.
    10.3390/app9204412
  15. Santos, L.M.S.; Borrego, L.P.; Ferreira, J.A.M.; de Jesus, J.; Costa, J.D.; Capela, C.. "Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel". Theoretical and Applied Fracture Mechanics 102 (2019): 10-15. http://dx.doi.org/10.1016/j.tafmec.2019.04.005.
    10.1016/j.tafmec.2019.04.005
  16. Santos, Luis M.S.; Ferreira, José A.M.; Borrego, Luis P.; Costa, Jose D.; Capela, Carlos; Jesus, Joel. "Fatigue crack propagation along interfaces of selective laser melting steel hybrid parts". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2431-2440. http://dx.doi.org/10.1111/ffe.13072.
    10.1111/ffe.13072
  17. Oliveira, P.I.; Loureiro, A.; Costa, J.M.; Ferreira, J.; Borrego, L.. "Fatigue strength assessment of misaligned laser beam welded T-joints by effective stress method". International Journal of Pressure Vessels and Piping 173 (2019): 68-78. http://dx.doi.org/10.1016/j.ijpvp.2019.05.001.
    10.1016/j.ijpvp.2019.05.001
  18. Capela, C.; Oliveira, S.E.; Ferreira, J.A.M.. "Fatigue behavior of short carbon fiber reinforced epoxy composites". Composites Part B: Engineering 164 (2019): 191-197. http://dx.doi.org/10.1016/j.compositesb.2018.11.035.
    10.1016/j.compositesb.2018.11.035
  19. Ferreira, José; Febra, Tiago; Costa, José; Capela, Carlos. "Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact". Frattura ed Integrità Strutturale 13 48 (2019): 242-248. http://dx.doi.org/10.3221/igf-esis.48.25.
    10.3221/igf-esis.48.25
  20. Antunes, Fernando; Branco, Ricardo; Ferreira, José; Borrego, Luís. "Stress Intensity Factor Solutions for CTS Mixed Mode Specimen". Frattura ed Integrità Strutturale 13 48 (2019): 676-692. http://dx.doi.org/10.3221/igf-esis.48.64.
    10.3221/igf-esis.48.64
  21. Ferreira, José; Oliveira, Sergio; Silva, Joel; Capela, Carlos. "Effect of machining parameters on the mechanical properties of high dosage short –carbon- fiber reinforced composites". Frattura ed Integrità Strutturale 13 48 (2019): 249-256. http://dx.doi.org/10.3221/igf-esis.48.26.
    10.3221/igf-esis.48.26
  22. Luis M. S. Santos; Joel Alexandre da Silva de Jesus; J.A.M. Ferreira; COSTA JDM; Carlos Capela. "Fracture Toughness of Hybrid Components with Selective Laser Melting 18Ni300 Steel Parts". Applied Sciences (2018): http://www.mdpi.com/2076-3417/8/10/1879.
    10.3390/app8101879
  23. Jesus, J.S.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Assessment of friction stir welding aluminium T-joints". Journal of Materials Processing Technology 255 (2018): 387-399. http://dx.doi.org/10.1016/j.jmatprotec.2017.12.036.
    10.1016/j.jmatprotec.2017.12.036
  24. Ferreira, José. "Effects of Shot-Peening and Stress Ratio on the Fatigue Crack Propagation of AL 7475-T7351 Specimens". Applied Sciences (2018): http://www.mdpi.com/2076-3417/8/3/375.
    10.3390/app8030375
  25. Branco, R.; Costa, J.D.M.; Berto, F.; Razavi, S.M.J.; Ferreira, J.A.M.; Capela, C.; Santos, L.; Antunes, F.. "Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting". Metals 8 1 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85040613508&partnerID=MN8TOARS.
    10.3390/met8010032
  26. Capela, C.; Oliveira, S. E.; Ferreira, J. A. M.. "Mechanical behavior of high dosage short carbon fiber reinforced epoxy composites". Fibers and Polymers 18 6 (2017): 1200-1207. http://dx.doi.org/10.1007/s12221-017-7246-0.
    10.1007/s12221-017-7246-0
  27. Jesus, J.S.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Fatigue strength improvement of GMAW T-welds in AA 5083 by friction-stir processing". International Journal of Fatigue 97 (2017): 124-134. http://dx.doi.org/10.1016/j.ijfatigue.2016.12.034.
    10.1016/j.ijfatigue.2016.12.034
  28. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of the mean stress on the fatigue behaviour of single lap joints". Journal of Adhesion 93 6 (2017): 504-513. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979996102&partnerID=MN8TOARS.
    10.1080/00218464.2015.1110699
  29. Reis, P.N.B.; Pereira, A.M.; Ferreira, J.A.M.; Costa, J.D.M.. "Cyclic creep response of adhesively bonded steel lap joints". Journal of Adhesion 93 9 (2017): 704-715. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978958241&partnerID=MN8TOARS.
    10.1080/00218464.2016.1146880
  30. Coelho, S.R.M.; Reis, P.N.B.; Ferreira, J.A.M.; Pereira, A.M.. "Effects of external patch configuration on repaired composite laminates subjected to multi-impacts". Composite Structures 168 (2017): 259-265. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013652178&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.02.069
  31. Branquinho, T.; Capela, C.; Ferreira, J.A.M.; Costa, J.D.. "Assessment of acoustic, thermal and mechanical properties of epoxy composites reinforced with expanded clay particles". Ciencia e Tecnologia dos Materiais 28 1 (2016): 34-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-84990984069&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.02.001
  32. Santos, L.M.S.; Ferreira, J.A.M.; Jesus, J.S.; Costa, J.M.; Capela, C.. "Fatigue behaviour of selective laser melting steel components". Theoretical and Applied Fracture Mechanics 85 (2016): 9-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991244856&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.011
  33. Ramos, R.; Ferreira, N.; Ferreira, J.A.M.; Capela, C.; Batista, A.C.. "Improvement in fatigue life of Al 7475-T7351 alloy specimens by applying ultrasonic and microshot peening". International Journal of Fatigue 92 (2016): 87-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-84977638408&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2016.06.022
  34. Reis, P.N.B.; Monteiro, J.F.R.; Pereira, A.M.; Ferreira, J.A.M.; Costa, J.D.M.. "Fatigue behaviour of epoxy-steel single lap joints under variable frequency". International Journal of Adhesion and Adhesives 63 (2015): 66-73. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940520025&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2015.08.008
  35. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.. "Initial crack length on the interlaminar fracture of woven carbon/epoxy laminates". Fibers and Polymers 16 4 (2015): 894-901. http://www.scopus.com/inward/record.url?eid=2-s2.0-84931268480&partnerID=MN8TOARS.
    10.1007/s12221-015-0894-z
  36. Reis, P.N.B.; Soares, J.R.L.; Pereira, A.M.; Ferreira, J.A.M.. "Effect of adherends and environment on static and transverse impact response of adhesive lap joints". Theoretical and Applied Fracture Mechanics 80 (2015): 79-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946088607&partnerID=MN8TOARS.
    10.1016/j.tafmec.2015.07.004
  37. Ferreira, J.A.M.; Santos, D.S.C.; Capela, C.; Costa, J.D.M.. "Impact response of nano reinforced mat glass/epoxy laminates". Fibers and Polymers 16 1 (2015): 173-180. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924078986&partnerID=MN8TOARS.
    10.1007/s12221-015-0173-z
  38. Borrego, L.P.; Costa, J.D.M.; Ferreira, J.A.M.; Silva, H.. "Fatigue behaviour of glass fibre reinforced epoxy composites enhanced with nanoparticles". Composites Part B: Engineering 62 (2014): 65-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896385780&partnerID=MN8TOARS.
    10.1016/j.compositesb.2014.02.016
  39. Ferreira, J.A.M.; Reis, P.N.B.; Costa, J.D.M.; Capela, C.. "Assessment of the mechanical properties of nanoclays enhanced low Tgepoxy resins". Fibers and Polymers 15 8 (2014): 1677-1684. http://www.scopus.com/inward/record.url?eid=2-s2.0-84906826101&partnerID=MN8TOARS.
    10.1007/s12221-014-1677-7
  40. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Pereira, A.M.. "Interlaminar fracture in woven carbon/epoxy laminates". Frattura ed Integrita Strutturale 30 (2014): 431-437. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907985579&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.30.52
  41. Mortas, N.; Reis, P.N.B.; Ferreira, J.A.M.. "Impact response of balsa core sandwiches". Frattura ed Integrita Strutturale 30 (2014): 403-408. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907970978&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.30.48
  42. Costa, J.D.M.; Jesus, J.S.; Loureiro, A.; Ferreira, J.A.M.; Borrego, L.P.. "Fatigue life improvement of mig welded aluminium T-joints by friction stir processing". International Journal of Fatigue 61 (2014): 244-254. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893739435&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2013.11.004
  43. Silva, H.; Ferreira, J.A.M.; Capela, C.; Richardson, M.O.W.. "Mixed Mode interlayer fracture of glass fiber/nano-enhanced epoxy composites". Composites Part A: Applied Science and Manufacturing 64 (2014): 211-222. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903172706&partnerID=MN8TOARS.
    10.1016/j.compositesa.2014.05.011
  44. Mortas, N.; Er, O.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of corrosive solutions on composites laminates subjected to low velocity impact loading". Composite Structures 108 1 (2014): 205-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896975385&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.09.032
  45. Capela, C.; Ferreira, J.A.M.; Febra, T.; Costa, J.D.. "Fatigue strength of tubular carbon fibre composites under bending/torsion loading". International Journal of Fatigue 70 (2014): 216-222. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908383963&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2014.09.008
  46. Pereira, A.M.; Ferreira, J.A.M.; Antunes, F.V.; Bártolo, P.J.. "Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints". Journal of Adhesion Science and Technology 28 14-15 (2014): 1432-1450. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899421626&partnerID=MN8TOARS.
    10.1080/01694243.2012.698107
  47. Silva, H.; Ferreira, J.A.M.; Costa, J.D.M.; Capela, C.. "Interlaminar adhesive strength of nano-reinforced glass/epoxy laminates". Journal of Adhesion 90 1 (2014): 3-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886710506&partnerID=MN8TOARS.
    10.1080/00218464.2013.784867
  48. Reis, P.N.B.; Ferreira, J.A.M.; Zhang, Z.Y.; Benameur, T.; Richardson, M.O.W.. "Impact strength of composites with nano-enhanced resin after fire exposure". Composites Part B: Engineering 56 (2014): 290-295. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884127665&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.08.048
  49. Reis, P.N.B.; Ferreira, J.A.M.; Pereira, A.M.; Antunes, F.J.V.. "Influence of superposition length on transverse impact response of single-strap adhesive joints". Journal of Adhesion 90 1 (2014): 65-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886648526&partnerID=MN8TOARS.
    10.1080/00218464.2013.797341
  50. Capela, C.; Ferreira, J.A.M.; Costa, J.D.. "Effect of the foam core density on the bending response on sandwich composites". Fibers and Polymers 14 4 (2013): 597-602. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878658483&partnerID=MN8TOARS.
    10.1007/s12221-013-0597-2
  51. Silva, H.; Ferreira, J.A.M.; Costa, J.D.M.; Capela, C.. "A study of mixed mode interlaminar fracture on nanoclay enhanced epoxy/glass fiber composites". Ciencia e Tecnologia dos Materiais 25 2 (2013): 92-97. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901458728&partnerID=MN8TOARS.
    10.1016/j.ctmat.2014.03.005
  52. da Silva, J.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing". Materials and Design 51 (2013): 315-322. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877797868&partnerID=MN8TOARS.
    10.1016/j.matdes.2013.04.026
  53. Reis, P.N.B.; Silva, A.P.; Santos, P.; Ferreira, J.A.M.. "Hygrothermal effect on the impact response of carbon composites with epoxy resin enhanced by nanoclays". Mechanics of Composite Materials 49 4 (2013): 429-436. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885481906&partnerID=MN8TOARS.
    10.1007/s11029-013-9359-x
  54. Ferreira, J.A.M.; Borrego, L.P.; Costa, J.D.M.; Capela, C.. "Fatigue behaviour of nanoclay reinforced epoxy resin composites". Composites Part B: Engineering 52 (2013): 286-291. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878539072&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.04.003
  55. Reis, P.N.B.; Santos, P.; Ferreira, J.A.M.; Richardson, M.O.W.. "Impact response of sandwich composites with nano-enhanced epoxy resin". Journal of Reinforced Plastics and Composites 32 12 (2013): 898-906. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878887819&partnerID=MN8TOARS.
    10.1177/0731684413478993
  56. Ferreira, J.A.M.; Reis, P.N.B.; Costa, J.D.M.; Richardson, M.O.W.. "A study of the mechanical behaviour on injection moulded nanoclay enhanced polypropylene composites". Journal of Thermoplastic Composite Materials 26 6 (2013): 721-732. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879826261&partnerID=MN8TOARS.
    10.1177/0892705711428658
  57. Ferreira, J.A.M.; Reis, P.N.B.; Costa, J.D.M.; Richardson, M.O.W.. "Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin". Journal of Composite Materials 47 15 (2013): 1885-1895. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879496880&partnerID=MN8TOARS.
    10.1177/0021998312452024
  58. Esteves, M.; Ramalho, A.; Ferreira, J.A.M.; Nobre, J.P.. "Tribological and mechanical behaviour of epoxy/nanoclay composites". Tribology Letters 52 1 (2013): 1-10. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880736938&partnerID=MN8TOARS.
    10.1007/s11249-013-0174-2
  59. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.. "Effect of saline environment on mechanical properties of adhesive joints". International Journal of Adhesion and Adhesives (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84883660742&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2013.08.002
  60. Reis, P.N.B.; Ferreira, J.A.M.; Santos, P.; Richardson, M.O.W.; Santos, J.B.. "Impact response of Kevlar composites with filled epoxy matrix". Composite Structures 94 12 (2012): 3520-3528. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864753446&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.05.025
  61. Borrego, L.P.; Antunes, F.V.; Costa, J.D.; Ferreira, J.M.. "Numerical simulation of plasticity induced crack closure under overloads and high-low blocks". Engineering Fracture Mechanics 95 (2012): 57-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868193879&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2012.07.016
  62. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Santos, M.J.. "Fatigue performance of Kevlar/epoxy composites with filled matrix by cork powder". Fibers and Polymers 13 10 (2012): 1292-1299. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871838716&partnerID=MN8TOARS.
    10.1007/s12221-012-1292-4
  63. Costa, J.D.; Ferreira, J.A.M.; Borrego, L.P.; Abreu, L.P.. "Fatigue behaviour of AA6082 friction stir welds under variable loadings". International Journal of Fatigue 37 (2012): 8-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-84655170139&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2011.10.001
  64. Reis, P.N.B.; Ferreira, J.M.; Richardson, M.O.W.. "Effect of the surface preparation on PP reinforced glass fiber adhesive lap joints strength". Journal of Thermoplastic Composite Materials 25 1 (2012): 3-13. http://www.scopus.com/inward/record.url?eid=2-s2.0-84857319075&partnerID=MN8TOARS.
    10.1177/0892705711408161
  65. Reis, P.N.B.; Ferreira, J.A.M.; Rodrigues, N.F.S.. "Impact behaviour of panels for automotive applications". Strain 47 SUPPL. 2 (2011): 79-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-84555203137&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2010.00735.x
  66. Ramalho, A.L.; Ferreira, J.A.M.; Branco, C.A.G.M.. "Fatigue behaviour of T welded joints rehabilitated by tungsten inert gas and plasma dressing". Materials and Design 32 10 (2011): 4705-4713. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960923463&partnerID=MN8TOARS.
    10.1016/j.matdes.2011.06.051
  67. Costa, J.D.; Ferreira, J.A.M.; Borrego, L.P.. "Influence of spectrum loading on fatigue resistance of AA6082 friction stir welds". International Journal of Structural Integrity 2 2 (2011): 122-134. http://www.scopus.com/inward/record.url?eid=2-s2.0-79957837127&partnerID=MN8TOARS.
    10.1108/17579861111135888
  68. Ferreira, J.A.M.; Capela, C.; Costa, J.D.. "Dynamic mechanical analysis of hybrid fibre/glass microspheres composites". Strain 47 3 (2011): 275-280. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955745790&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2009.00681.x
  69. Reis, P.N.B.; Ferreira, J.A.M.; Richardson, M.O.W.. "Fatigue damage characterization by NDT in polypropylene/glass fibre composites". Applied Composite Materials 18 5 (2011): 409-419. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052958801&partnerID=MN8TOARS.
    10.1007/s10443-010-9172-9
  70. Ferreira, J.A.M.; Reis, P.N.B.; Costa, J.D.M.; Richardson, B.C.H.; Richardson, M.O.W.. "A study of the mechanical properties on polypropylene enhanced by surface treated nanoclays". Composites Part B: Engineering 42 6 (2011): 1366-1372. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960021776&partnerID=MN8TOARS.
    10.1016/j.compositesb.2011.05.038
  71. Reis, P.N.B.; Ferreira, J.A.M.; Silva, P.A.A.. "Mechanical behaviour of composites filled by agro-waste materials". Fibers and Polymers 12 2 (2011): 240-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-79953730304&partnerID=MN8TOARS.
    10.1007/s12221-011-0240-z
  72. Antunes, F.V.; Ferreira, J.A.M.; Capela, C.. "Numerical modelling of the Young's modulus of syntactic foams". Finite Elements in Analysis and Design 47 2 (2011): 78-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-78049503984&partnerID=MN8TOARS.
    10.1016/j.finel.2010.09.007
  73. Costa, J.D.M.; Capela, C.; Ferreira, J.A.M.. "Mechanical behaviour of pvc/caco 3 particulate composites - Influence of temperature". Strain 47 SUPPL. 1 (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-79958780670&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2009.00624.x
  74. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.. "Effect of adherends rigidity on the shear strength of single lap adhesive joints". International Journal of Adhesion and Adhesives 31 4 (2011): 193-201. http://www.scopus.com/inward/record.url?eid=2-s2.0-79953043585&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.12.003
  75. Ferreira, J.A.M.; Salviano, K.; Costa, J.D.; Capela, C.. "Fatigue behaviour in hybrid hollow microspheres/fibre reinforced composites". Journal of Materials Science 45 13 (2010): 3547-3553. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952092349&partnerID=MN8TOARS.
    10.1007/s10853-010-4397-4
  76. Pereira, A.M.; Ferreira, J.M.; Loureiro, A.; Costa, J.D.M.; Bártolo, P.J.. "Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy". Materials and Design 31 5 (2010): 2454-2463. http://www.scopus.com/inward/record.url?eid=2-s2.0-76749090555&partnerID=MN8TOARS.
    10.1016/j.matdes.2009.11.052
  77. Ferreira, J.A.M.; Capela, C.; Costa, J.D.. "A study of the mechanical properties of natural fibre reinforced composites". Fibers and Polymers 11 8 (2010): 1181-1186. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650621446&partnerID=MN8TOARS.
    10.1007/s12221-010-1181-7
  78. Borrego, L.P.; Antunes, F.V.; Costa, J.D.; Ferreira, J.M.. "A numerical study of plasticity induced crack closure under overloads and Hi-Lo blocks". 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-84870972640&partnerID=MN8TOARS.
  79. Ferreira, J.A.M.; Capela, C.; Costa, J.D.. "A study of the mechanical behaviour on fibre reinforced hollow microspheres hybrid composites". Composites Part A: Applied Science and Manufacturing 41 3 (2010): 345-352. http://www.scopus.com/inward/record.url?eid=2-s2.0-74149090588&partnerID=MN8TOARS.
    10.1016/j.compositesa.2009.10.018
  80. Pereira, A.M.; Ferreira, J.M.; Antunes, F.V.; Bártolo, P.J.. "Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints". Journal of Materials Processing Technology 210 4 (2010): 610-617. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349114944&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2009.11.006
  81. Silva, J.M.; Cláudio, R.A.; Branco, C.M.; Ferreira, J.M.. "Creep-fatigue behavior of a new generation Ni-base superalloy for aeroengine usage". Procedia Engineering 2 1 (2010): 1865-1875. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954107904&partnerID=MN8TOARS.
    10.1016/j.proeng.2010.03.201
  82. Costa, J.D.M.; Ferreira, J.A.M.; Abreu, L.P.M.. "Fatigue behaviour of butt welded joints in a high strength steel". Procedia Engineering 2 1 (2010): 697-705. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954134331&partnerID=MN8TOARS.
    10.1016/j.proeng.2010.03.075
  83. Borrego, L.P.; Costa, J.M.; Antunes, F.V.; Ferreira, J.M.. "Fatigue crack growth in heat-treated aluminium alloys". Engineering Failure Analysis 17 1 (2010): 11-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350712481&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.11.007
  84. Capela, C.; Ferreira, J.A.M.; Costa, J.D.. "Viscoelastic properties assessment of syntactic foams by dynamic mechanical analysis". Materials Science Forum 636-637 (2010): 280-286. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649099789&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.280
  85. Pernica, D.; Reis, P.N.B.; Ferreira, J.A.M.; Louda, P.. "Effect of test conditions on the bending strength of a geopolymer- reinforced composite". Journal of Materials Science 45 3 (2010): 744-749. http://www.scopus.com/inward/record.url?eid=2-s2.0-76649113081&partnerID=MN8TOARS.
    10.1007/s10853-009-3994-6
  86. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.; Capela, C.. "Analysis of the initial delamination size on the mode i interlaminar fracture of carbon/epoxy composites". ICCM International Conferences on Composite Materials (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-80052056315&partnerID=MN8TOARS.
  87. Abreu, L.M.P.; Costa, J.D.; Ferreira, J.A.M.. "Fatigue behaviour of AlMgSi tubular specimens subjected to bending-torsion loading". International Journal of Fatigue 31 8-9 (2009): 1327-1336. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349284101&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2009.03.004
  88. Costa, J.M.; Ferreira, J.M.; Capela, C.. "Fracture toughness of the heat affected zone on Nd-YAG laser welded joints". Engineering Failure Analysis 16 4 (2009): 1245-1251. http://www.scopus.com/inward/record.url?eid=2-s2.0-62649124661&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.08.002
  89. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Richardson, M.O.W.. "Effect of interlayer delamination on mechanical behavior of carbon/epoxy laminates". Journal of Composite Materials 43 22 (2009): 2609-2621. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350478411&partnerID=MN8TOARS.
    10.1177/0021998309344649
  90. Pereira, A.M.; Ferreira, J.M.; Antunes, F.V.; Bártolo, P.J.. "Study on the fatigue strength of AA 6082-T6 adhesive lap joints". International Journal of Adhesion and Adhesives 29 6 (2009): 633-638. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349239350&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.02.009
  91. Ferreira, J.A.M.; Amaral, M.A.P.; Antunes, F.V.; Costa, J.D.M.. "A study on the mechanical behaviour of WC/Co hardmetals". International Journal of Refractory Metals and Hard Materials 27 1 (2009): 1-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-53549103585&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2008.01.013
  92. Borrego, L.P.; Pires, J.T.B.; Costa, J.M.; Ferreira, J.M.. "Mould steels repaired by laser welding". Engineering Failure Analysis 16 2 (2009): 596-607. http://www.scopus.com/inward/record.url?eid=2-s2.0-57749187666&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.02.010
  93. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.. "Fatigue life evaluation for carbon/epoxy laminate composites under constant and variable block loading". Composites Science and Technology 69 2 (2009): 154-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-57749105234&partnerID=MN8TOARS.
    10.1016/j.compscitech.2008.09.043
  94. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.; Capela, C.. "A study of the mode i and mode II interlaminar fracture of carbon/epoxy bi-directional composites". 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures 2 (2008): 1454-1461. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866132080&partnerID=MN8TOARS.
  95. Antunes, F.; Ramalho, A.; Ferreira, J.A.M.; Capela, C.; Reis, P.. "Determination of elastic properties by resonant technique: A sensitivity analysis". Journal of Testing and Evaluation 36 1 (2008): 89-99. http://www.scopus.com/inward/record.url?eid=2-s2.0-38549135459&partnerID=MN8TOARS.
  96. Borrego, L.P.; Ferreira, J.M.; Costa, J.M.. "Partial crack closure under block loading". International Journal of Fatigue 30 10-11 (2008): 1787-1796. http://www.scopus.com/inward/record.url?eid=2-s2.0-44749090291&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2008.02.004
  97. Capela, C.; Costa, J.D.; Ferreira, J.A.M.. "Test conditions effect on the fracture toughness of hollow glass micro-sphere filled composites". Strain 44 2 (2008): 141-146. http://www.scopus.com/inward/record.url?eid=2-s2.0-40749089954&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2007.00357.x
  98. Borrego, L.P.; Pires, J.T.B.; Costa, J.M.; Ferreira, J.M.. "Fatigue behaviour of laser repairing welded joints". Engineering Failure Analysis 14 8 SPEC. IS (2007): 1586-1593. http://www.scopus.com/inward/record.url?eid=2-s2.0-34250866743&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2006.11.054
  99. Ferreira, J.M.; Pires, J.T.B.; Costa, J.D.; Errajhi, O.A.; Richardson, M.. "Fatigue damage and environment interaction of polyester aluminized glass fiber composites". Composite Structures 78 3 (2007): 397-401. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845305008&partnerID=MN8TOARS.
    10.1016/j.compstruct.2005.10.011
  100. Pereira, A.M.; Bártolo, P.J.; Ferreira, J.M.; Antunes, F.. "Laminated Object Manufacturing with aluminium bonded sheets". Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping (2007): 597-601. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049085556&partnerID=MN8TOARS.
  101. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.. "Flexural behaviour of hybrid laminated composites". Composites Part A: Applied Science and Manufacturing 38 6 (2007): 1612-1620. http://www.scopus.com/inward/record.url?eid=2-s2.0-34147160244&partnerID=MN8TOARS.
    10.1016/j.compositesa.2006.11.010
  102. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.J.; Costa, J.D.M.. "Fatigue notch sensibility of thermoplastic glass fibres composites". Materials Science Forum 514-516 PART 1 (2006): 653-656. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849014255&partnerID=MN8TOARS.
  103. Ferreira, J.M.; Errajhi, O.A.Z.; Richardson, M.O.W.. "Thermogravimetric analysis of aluminised E-glass fibre reinforced unsaturated polyester composites". Polymer Testing 25 8 (2006): 1091-1094. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750951709&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2006.07.012
  104. Borrego, L.P.; Antunes, F.V.; Costa, J.M.; Ferreira, J.M.. "Mixed-mode fatigue crack growth behaviour in aluminium alloy". International Journal of Fatigue 28 5-6 (2006): 618-626. http://www.scopus.com/inward/record.url?eid=2-s2.0-30844458842&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2005.07.047
  105. Reis, P.N.B.; Ferreira, J.M.; Silva, H.; Costa, J.D.; Richardson, M.. "Stacking laminate effects on adhesive lap joints strength". 11th International Conference on Fracture 2005, ICF11 2 (2005): 859-864. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869799678&partnerID=MN8TOARS.
  106. Ferreira, J.M.; Pires, J.T.B.; Costa, J.D.; Zhang, Z.Y.; Errajhi, O.A.; Richardson, M.. "Fatigue damage analysis of aluminized glass fiber composites". Materials Science and Engineering A 407 1-2 (2005): 1-6. http://www.scopus.com/inward/record.url?eid=2-s2.0-27144504942&partnerID=MN8TOARS.
    10.1016/j.msea.2005.07.009
  107. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.. "Creep behaviour of adhesive lap joints in thermoplastics composites". Journal of Strain Analysis for Engineering Design 40 3 (2005): 287-294. http://www.scopus.com/inward/record.url?eid=2-s2.0-17544370261&partnerID=MN8TOARS.
    10.1243/030932405X7700
  108. Costa, J.D.M.; Abreu, L.M.P.; Pinho, A.C.M.; Ferreira, J.A.M.. "Fatigue behaviour of tubular AlMgSi welded specimens subjected to bending-torsion loading". Fatigue and Fracture of Engineering Materials and Structures 28 4 (2005): 399-407. http://www.scopus.com/inward/record.url?eid=2-s2.0-15944423617&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2005.00875.x
  109. Silva, J.M.A.; Devezas, T.C.; Silva, A.P.; Ferreira, J.A.M.. "Mechanical characterization of composites with embedded optical fibers". Journal of Composite Materials 39 14 (2005): 1261-1281. http://www.scopus.com/inward/record.url?eid=2-s2.0-23244437078&partnerID=MN8TOARS.
    10.1177/0021998305050423
  110. Borrego, L.P.; Costa, J.M.; Ferreira, J.M.. "Fatigue crack growth in thin aluminium alloy sheets under loading sequences with periodic overloads". Thin-Walled Structures 43 5 (2005): 772-788. http://www.scopus.com/inward/record.url?eid=2-s2.0-14944359188&partnerID=MN8TOARS.
    10.1016/j.tws.2004.11.001
  111. Ferreira, J.M.; Silva, H.; Costa, J.D.; Richardson, M.. "Stress analysis of lap joints involving natural fibre reinforced interface layers". Composites Part B: Engineering 36 1 (2005): 1-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-4444246204&partnerID=MN8TOARS.
    10.1016/j.compositesb.2004.04.011
  112. Reis, P.N.B.; Antunes, F.J.V.; Ferreira, J.A.M.. "Influence of superposition length on mechanical resistance of single-lap adhesive joints". Composite Structures 67 1 (2005): 125-133. http://www.scopus.com/inward/record.url?eid=2-s2.0-6444227322&partnerID=MN8TOARS.
    10.1016/j.compstruct.2004.01.018
  113. Borrego, L.P.; Costa, J.M.; Silva, S.; Ferreira, J.M.. "Microstructure dependent fatigue crack growth in aged hardened aluminium alloys". International Journal of Fatigue 26 12 (2004): 1321-1331. http://www.scopus.com/inward/record.url?eid=2-s2.0-6344287244&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2004.04.004
  114. Capela, C.; Costa, J.D.; Antunes, F.; Ferreira, J.M.. "Thermal fatigue assessment of components made with particulate polymer composites". Theoretical and Applied Fracture Mechanics 42 2 (2004): 171-181. http://www.scopus.com/inward/record.url?eid=2-s2.0-5144233644&partnerID=MN8TOARS.
    10.1016/j.tafmec.2004.08.008
  115. Antunes, F.V.; Borrego, L.F.P.; Costa, J.D.; Ferreira, J.M.. "A numerical study of fatigue crack closure induced by plasticity". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 825-835. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042604662&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00738.x
  116. Abreu, L.M.P.; Costa, J.D.M.; Ferreira, J.A.M.; Antunes, F.J.V.. "In-phase multiaxial fatigue analysis of tubular AlMgSi welded specimens". Materials Science Forum 455-456 (2004): 303-306. http://www.scopus.com/inward/record.url?eid=2-s2.0-17044449604&partnerID=MN8TOARS.
  117. Borrego, L.P.; Abreu, L.M.; Costa, J.M.; Ferreira, J.M.. "Analysis of low cycle fatigue in AlMgSi aluminium alloys". Engineering Failure Analysis 11 5 (2004): 715-725. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042549599&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2003.09.003
  118. Costa, J.D.M.; Antunes, F.J.V.; Silva, V.R.; Ferreira, J.A.M.. "Comparative analysis of fatigue life predictions in central notched specimens of Al-Mg-Si alloys". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 837-848. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143069058&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00735.x
  119. Silva, H.; Costa, J.D.; Ferreira, J.M.; Richardson, M.. "Residual strength in adhesive joints with a natural fibber reinforcement interface layer". Materials Science Forum 455-456 (2004): 472-475. http://www.scopus.com/inward/record.url?eid=2-s2.0-17044447735&partnerID=MN8TOARS.
  120. Pinho-da-Cruz, J.A.M.; Ferreira, J.A.M.; Costa, J.D.M.; Borrego, L.F.P.. "Fatigue analysis of thin AlMgSi welded joints under constant and variable amplitude block loadings". Thin-Walled Structures 41 5 (2003): 389-402. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037403934&partnerID=MN8TOARS.
    10.1016/S0263-8231(03)00005-3
  121. Capela, C.; Costa, J.D.; Ferreira, J.M.; Raimundo, A.M.. "Thermal stress analysis in participate composite components". Strain 39 2 (2003): 49-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037591553&partnerID=MN8TOARS.
    10.1046/j.1475-1305.2003.00053.x
  122. Borrego, L.P.; Ferreira, J.M.; Pinho da Cruz, J.M.; Costa, J.M.. "Evaluation of overload effects on fatigue crack growth and closure". Engineering Fracture Mechanics 70 11 (2003): 1379-1397. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037411309&partnerID=MN8TOARS.
    10.1016/S0013-7944(02)00119-4
  123. Silva, J.M.A.; Ferreira, J.A.M.; Devezas, T.C.. "Fatigue damage of carbon-epoxy laminates with embedded optical fibres". Materials Science and Technology 19 6 (2003): 809-814. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038376121&partnerID=MN8TOARS.
    10.1179/026708303225002127
  124. Antunes, F.J.V.; Costa, J.D.M.; Ferreira, J.A.M.. "Improvement of the mechanical response of an electrical component". Engineering Failure Analysis 10 5 (2003): 511-519. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141680213&partnerID=MN8TOARS.
    10.1016/S1350-6307(03)00038-4
  125. Reis, P.N.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.. "Creep behaviour of PP/glass-fibre composite adhesive lap joints". Key Engineering Materials 230-232 (2002): 315-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036431290&partnerID=MN8TOARS.
  126. Ramalho, A.; Costa, J.D.M.; Ferreira, J.A.M.; Capela, C.. "Fracture toughness and wear analysis of PMMA/SiO2 acrylic casting dispersions". Key Engineering Materials 230-232 (2002): 222-225. http://www.scopus.com/inward/record.url?eid=2-s2.0-18744433477&partnerID=MN8TOARS.
  127. Antunes, F.V.; Ferreira, J.M.; Costa, J.D.; Capela, C.. "Fatigue life predictions in polymer particle composites". International Journal of Fatigue 24 10 (2002): 1095-1105. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036778784&partnerID=MN8TOARS.
    10.1016/S0142-1123(02)00016-6
  128. Ferreira, J.A.M.; Reis, P.N.; Costa, J.D.M.; Richardson, M.O.W.. "Fatigue behaviour of composite adhesive lap joints". Composites Science and Technology 62 10-11 (2002): 1373-1379. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036676742&partnerID=MN8TOARS.
    10.1016/S0266-3538(02)00082-9
  129. Costa, J.D.; Ferreira, J.M.; Capela, C.. "Fatigue behaviour of PMMA/silica acrylic casting dispersions". Materials Science and Technology 17 12 (2001): 1657-1663. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035660124&partnerID=MN8TOARS.
  130. Borrego, L.P.; Ferreira, J.M.; Costa, J.M.. "Fatigue crack growth and crack closure in an AIMgSi alloy". Fatigue and Fracture of Engineering Materials and Structures 24 4 (2001): 255-265. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035300869&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2001.00383.x
  131. Antunes, F.V.; Ferreira, J.M.; Branco, C.M.; Byrne, J.. "Influence of stress state on high temperature fatigue crack growth in Inconel 718". Fatigue and Fracture of Engineering Materials and Structures 24 2 (2001): 127-135. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035245075&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2001.00375.x
  132. Costa, J.D.; Ferreira, J.M.; Ramalho, A.L.. "Fatigue and fretting fatigue of ion-nitrated 34CrNiMo6 steel". Theoretical and Applied Fracture Mechanics 35 1 (2001): 69-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035103982&partnerID=MN8TOARS.
    10.1016/S0167-8442(00)00050-1
  133. Antunes, F.V.; Ferreira, J.M.; Branco, C.M.; Byrne, J.. "Stress intensity factors for tunnelling corner cracks under mode I loading". Fatigue and Fracture of Engineering Materials and Structures 23 1 (2000): 81-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034429169&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2000.00215.x
  134. Antunes, F.V.; Ferreira, J.M.; Branco, C.M.; Byrne, J.. "High temperature fatigue crack growth in Inconel 718". Materials at High Temperatures 17 4 (2000): 439-448. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034480044&partnerID=MN8TOARS.
  135. Antunes, F.V.; Ramalho, A.; Ferreira, J.M.. "Identification of fatigue crack propagation modes by means of roughness measurements". International Journal of Fatigue 22 9 (2000): 781-788. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034291126&partnerID=MN8TOARS.
    10.1016/S0142-1123(00)00048-7
  136. Pinho Da Cruz, J.A.M.; Costa, J.D.M.; Borrego, L.F.P.; Ferreira, J.A.M.. "Fatigue life prediction in AlMgSi1 lap joint weldments". International Journal of Fatigue 22 7 (2000): 601-610. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034250931&partnerID=MN8TOARS.
    10.1016/S0142-1123(00)00023-2
  137. Antunes, F.V.; Ferreira, J.M.; Byrne, J.. "Stress intensity factor calculation based on the work of external forces". International Journal of Fracture 98 1 (1999): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033319938&partnerID=MN8TOARS.
  138. Ferreira, J.A.M.; Costa, J.D.M.; Reis, P.N.B.; Richardson, M.O.W.. "Analysis of fatigue and damage in glass-fibre-reinforced polypropylene composite materials". Composites Science and Technology 59 10 (1999): 1461-1467. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033180220&partnerID=MN8TOARS.
    10.1016/S0266-3538(98)00185-7
  139. Ferreira, J.A.M.; Costa, J.D.M.; Reis, P.N.B.. "Static and fatigue behaviour of glass-fibre-reinforced polypropylene composites". Theoretical and Applied Fracture Mechanics 31 1 (1999): 67-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033082556&partnerID=MN8TOARS.
    10.1016/S0167-8442(98)00068-8
  140. Costa, J.D.M.; Ferreira, J.A.M.. "Effect of stress ratio and specimen thickness on fatigue crack growth of CK45 steel". Theoretical and Applied Fracture Mechanics 30 1 (1998): 65-73. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032173162&partnerID=MN8TOARS.
    10.1016/S0167-8442(98)00044-5
  141. Richardson, M.O.W.; Branco, C.M.; Ferreira, J.A.M.. "The effect of test conditions on the fatigue properties of a phenolic composite". Journal of Composite Materials 31 18 (1997): 1826-1837. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030681614&partnerID=MN8TOARS.
  142. Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.. "Effect of notch and test conditions on the fatigue of a glass-fibre-reinforced polypropylene composite". Composites Science and Technology 57 9-10 (1997): 1243-1248. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031225081&partnerID=MN8TOARS.
  143. Ferreira, J.A.M.; Costa, J.D.M.; Lapa, V.. "Fatigue behaviour of 42Cr Mo4 steel with PVD coatings". International Journal of Fatigue 19 4 (1997): 293-299. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031118397&partnerID=MN8TOARS.
  144. Ferreira, J.M.; Costa, J.D.; Capela, C.. "Fracture assessment of PMMA/Si kitchen sinks made from acrylic casting dispersion". Theoretical and Applied Fracture Mechanics 26 2 (1997): 105-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031096416&partnerID=MN8TOARS.
  145. Ferreira, J.A.M.; Borrego, L.F.P.; Costa, J.D.M.. "Effects of surface treatments on the fatigue of notched bend specimens". Fatigue and Fracture of Engineering Materials and Structures 19 1 (1996): 111-117. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029770898&partnerID=MN8TOARS.
  146. Moura Branco, C.; Ferreira, J.M.; Fael, P.; Richardson, M.O.W.. "A comparative study of the fatigue behaviour of GRP hand lay-up and pultruded phenolic composites". International Journal of Fatigue 18 4 (1996): 255-263. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030146130&partnerID=MN8TOARS.
    10.1016/0142-1123(95)00059-3
  147. Ferreira, J.A.M.; Costa, J.D.M.; Reis, P.N.B.. "Fatigue and creep in titanium grade 2". International Journal of Fatigue 18 4 (1996): 227-233. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030149417&partnerID=MN8TOARS.
    10.1016/0142-1123(96)00001-1
  148. Ferreira, J.M.; Pereira, A.H.; Branco, C.M.. "A fracture mechanics based fatigue life prediction for welded joints of square tubes". Thin-Walled Structures 21 2 (1995): 107-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028992851&partnerID=MN8TOARS.
  149. Branco, C.M.; Eichler, K.; Ferreira, J.M.. "Fatigue behavior of E-glass fiber reinforced phenolic composites: effect of temperature, mean stress and fiber surface treatment". Theoretical and Applied Fracture Mechanics 20 2 (1994): 75-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028448512&partnerID=MN8TOARS.
  150. Costa, J.D.; Ferreira, J.M.. "Fatigue crack initiation in notched specimens of 17Mn4 steel". International Journal of Fatigue 15 6 (1993): 501-507. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027696230&partnerID=MN8TOARS.
  151. Branco, C.M.; Ferreira, J.M.; Richardson, M.O.W.; Fael, P.. "Fatigue behaviour of a phenolic matrix composite". International Journal of Fatigue 14 6 (1992): 367-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042514595&partnerID=MN8TOARS.
  152. Ferreira, J.M.; Branco, C.M.. "Influence of misalignment on the fatigue strength of butt welds". International Journal of Fatigue 13 5 (1991): 405-409. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026227128&partnerID=MN8TOARS.
  153. Ferreira, J.M.; Branco, C.M.. "Influence of fillet weld joint geometry on fatigue crack growth". Theoretical and Applied Fracture Mechanics 15 2 (1991): 131-142. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026190811&partnerID=MN8TOARS.
  154. Branco, C.Moura; Ferreira, J.A.. "Fatigue analysis of T joints in plates". (1991): 458-463. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026394353&partnerID=MN8TOARS.
  155. Ferreira, J.A.; Branco, C.M.. "Fatigue analysis and prediction in fillet welded joints in the low thickness range". Fatigue and Fracture of Engineering Materials and Structures 13 3 (1990): 201-212. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025636579&partnerID=MN8TOARS.
  156. Ferreira, J.M.; Branco, C.M.. "Fatigue behaviour of welded nodes of square tubes". PROC. 8TH INT. CONF. ON OFFSHORE MECHANICS & ARCTIC ENGINEERING, THE HAGUE, MAR. 19-23, 1989 III - Mate (1989): 369-374. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024548422&partnerID=MN8TOARS.
  157. Ferreira, J.M.; Branco, C.M.. "Fatigue behavior of welded nodes of square tubes". Proceedings of the International Offshore Mechanics and Arctic Engineering Symposium 3 8 th (1989): 369-374. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024860480&partnerID=MN8TOARS.
  158. Ferreira, J.M.; Branco, C.M.. "Influence of weld and plate geometry on the fatigue strength of cruciform joints". Theoretical and Applied Fracture Mechanics 9 1 (1988): 23-32. http://www.scopus.com/inward/record.url?eid=2-s2.0-0023964258&partnerID=MN8TOARS.
  159. Ferreira, J.M.; Branco, Moura C.. "FATIGUE LIFE ASSESSMENT IN CRUCIFORM JOINTS.". (1986): 1049-1061. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022847347&partnerID=MN8TOARS.
  160. Branco, C.M.; Ferreira, J.A.. "FATIGUE ANALYSIS OF BUS STRUCTURES.". (1984): 643-658. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021726103&partnerID=MN8TOARS.
  161. Ferreira, J.A.; Branco, C.M.; Radon, J.C.. "DEFECT TOLERANCE ANALYSIS OF CRUCIFORM WELDED JOINTS SUBJECTED TO FATIGUE LOADING.". (1984): 181-195. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021696738&partnerID=MN8TOARS.
  162. Ferreira, J.A.; Branco, C.M.; Radon, J.C.. "FATIGUE LIFE ASSESSMENT IN WELDED RECTANGULAR HOLLOW SECTIONS USING FRACTURE MECHANICS.". (1984): 749-761. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021595271&partnerID=MN8TOARS.
  163. Ferreira, J.A.; Branco, C.M.; Radon, J.C.. "FATIGUE CRACK GROWTH IN WELDED STEEL RECTANGULAR HOLLOW SECTIONS.". (1983): 463-473. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020922327&partnerID=MN8TOARS.
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2019 - 2019 Análise do efeito do tratamento térmico na resistência à fadiga de provetes de titânio produzidos por fabricação aditiva
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Efeito ambiental e do HIP na propagação de fendas por fadiga em Ti6Al4V produzido por Fabricação Aditiva
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Análise da propagação de fendas por fadiga em provetes de titânio obtidos por Fusão Seletiva por Laser
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Análise da resposta ao impacto de compósitos fabricados por sobremoldação
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Efeito do tratamento térmico e do substrato na propagação de fendas por fadiga em provetes de aço obtidos por fusão seletiva a laser
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Influência dos parâmetros de "shot-peening" na melhoria da vida à fadiga em ligas de alumínio
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Estudo do efeito da percentagem de fibra na resistência à fadiga de compósitos de fibra curta carbono / epóxi
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Análise do comportamento mecânico de compósitos de fibras curtas de carbono/epóxi
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Propagação de fendas de fadiga em elementos híbridos de aço com implante por sinterização a laser
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Estudo da resistência à fadiga de componentes metálicos reparados por soldadura a laser
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Análise do desempenho mecânico de componentes obtidos por tecnologia MuCell
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Comportamento à fadiga de componentes de aço produzidos por sinterização laser
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Comportamento à fluência de ligas de alumínio usadas em permutadores de calor de automóveis
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Melhoria da vida à fadiga de ligas aeronáuticas de alumínio por Ultrasonic peening e microshot peening
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Efeito do “micro-shot-peening” na propagação de fendas por fadiga na liga aeronáutica Al 7475-T7351
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Desenvolvimento e maquinagem em compósito com fibra curta de carbono
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2014 Comportamento à fadiga de amplitude variável em juntas soldadas MIG pós processadas por fricção linear (FSP) na liga de alumínio 5083-H111
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2014 Melhoria de vida à fadiga em ligas aeronáuticas de alumínio por micro shot peening
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2014 Estudo do comportamento da resistência de laminado em fibra de carbono submetido a fadiga térmica
Co-supervisor
 Engenharia Mecânica - Produção Industrial (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2009 - 2009 Comportamento mecânico de compósitos de fibra de vidro/epoxy nano-reforçados
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1999 - 1999 Propagação de Fendas por Fadiga a Alta Temperatura em Inconel 718
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1999 - 1999 Projecto para o Teste e Depuração com Base Nos Arquitectruras 1149.1 e P1149.4
Co-supervisor
 Outro ramo (PhD)
Universidade do Porto, Portugal