???global.info.a_carregar???
Parisa Amir khizi. Completed the Doutoramento in Ciência e Engenharia de Materiais in 2025/03/25 by Universidade de Aveiro, Master in Biomedical Engineering in 2013/02/16 by Islamic Azad University Science and Research Branch and Bachelor in Material Engineering in 2006/10/22 by Islamic Azad University Saveh Branch. Is Ph.D student in Universidade de Aveiro. Published 14 articles in journals. Has 1 section(s) of books. Participated in 8 event(s). Participates and/or participated as PhD Student Fellow in 1 project(s). Works in the area(s) of Engineering and Technology with emphasis on Materials Engineering with emphasis on Ceramics and Engineering and Technology with emphasis on Materials Engineering with emphasis on Composites. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: Synthesis; Power Factor; Seebeck; Perovskite; n-type; Sintering; TE performance; Alumina-glass composite; Dental restoration; In-Ceram technique; glass infiltration; Thermoelectric Ca cobaltite; Rare-earth substitutions; Ceramic route; Electrical performance; Calcium cobaltite; Electrical properties; Composite; Redox tuning; Thermoelectric oxide; Barium titanate; Calcium manganite; Solid-state method; Hot uniaxial pressing; Laser floating zone; Thermal conductivity; High-temperature thermoelectric module; Module performance; Power output; Power density; Stability; Thermoelectric calcium cobaltite; Rock salt-type layers; Rare-earth substitutions; Ceramic route; Electrical performance; MAX-phase; MXene; TE module; SPS; Ultra fast high temperature sintering; SEM; XRD; .
Read full resume ↓
Identification

Personal identification

Full name
Parisa Amir khizi

Citation names

  • Amirkhizi, Parisa

Author identifiers

Ciência ID
7611-2B3F-BF2D
ORCID iD
0000-0003-2764-4108

Email addresses

  • parisa.amirkhizi@ua.pt (Professional)

Addresses

  • University of Aveiro, 3810-193, Aveiro, Gloria, Portugal (Professional)

Knowledge fields

  • Engineering and Technology - Materials Engineering - Ceramics
  • Engineering and Technology - Materials Engineering - Composites

Languages

Language Speaking Reading Writing Listening Peer-review
Persian (Mother tongue)
Turkish (Mother tongue)
English Upper intermediate (B2) Advanced (C1) Upper intermediate (B2) Upper intermediate (B2) Upper intermediate (B2)
Portuguese Elementary (A2) Elementary (A2) Elementary (A2) Elementary (A2) Elementary (A2)
Spanish; Castilian Elementary (A2) Elementary (A2) Elementary (A2) Elementary (A2) Elementary (A2)
Education
Degree Classification
2021
Concluded
 Ciência e Engenharia de Materiais (Doutoramento)
Major in Sem especialidade
Universidade de Aveiro, Portugal
"A procura de módulos termoelétricos cerâmicos de alto rendimento" (THESIS/DISSERTATION)
2008/09/01 - 2013/02/16
Concluded
 Biomedical Engineering (Master)
Major in Biomaterials
Islamic Azad University Science and Research Branch, Iran
"Preparation of Alumina Dental Core through glass phase infiltration " (THESIS/DISSERTATION)
 15,83
2002/09/01 - 2006/10/22
Concluded
 Material Engineering (Bachelor)
Major in Ceramics
Islamic Azad University Saveh Branch, Iran
 15,69
Affiliation

Science

Category
Host institution 		Employer
2025/10/01 - Current Contracted Researcher (Research) Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro CICECO, Portugal

Others

Category
Host institution 		Employer
2019/09/20 - 2025/03/25 Ph.D student Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
Projects

Grant

Designation Funders
2020/11/01 - 2024/10/31 A quest for high performance ceramic thermoelectric modules
2020.08051.BD
PhD Student Fellow
Fundação para a Ciência e a Tecnologia, Portugal
Concluded
2020/11/01 - 2024/10/31 A Quest for High Performance Ceramic Thermoelectric Modules
2020.08051.BD
10.54499/2020.08051.BD
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2022 - 2023 Waste-heat harvesting Unileg-type thermoelectric generators made from titanate-based ceramic composites
2021.09690.CBM
Researcher
Fundação para a Ciência e a Tecnologia

Deutscher Akademischer Austauschdienst
Concluded

Contract

Designation Funders
2025/10/01 - Current Multiscale design of sustainable MXene-Boosted Ceramic Composites for Efficient Thermoelectric Harvesting and Cooling
CDL-CTTRI-161-SGRH/2025
Researcher
Universidade de Aveiro CICECO, Portugal
Ongoing
Outputs

Publications

Conference paper
  1. Amirkhizi, Parisa; Sotelo, Andres; Madre, Maria A.; Miguel Ángel Torres Portero; Sh. Rasekh; Kovalevsky, Andrei. Corresponding author: Sotelo, Andres. "Fabrication of thermoelectric legs and their integration into a prototype thermoelectric generator". Paper presented in International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2024), Ankara, 2024.
    Published
  2. Amirkhizi, Parisa; Sh. Rasekh; Mehdi Hedayati; Kovalevsky, Andrei. Corresponding author: Sh. Rasekh. "Towards High Temperature Thermoelectrics: Effect of simultaneous doping and defect chemistry engineering on perovskite materials". Paper presented in International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2024), Ankara, 2024.
    Published
  3. Kovalevsky, Andrei; Constantinescu, Gabriel; Lopes, Diogo; Ferreira, Nuno M.; Zakharchuk, Kiryl; Paulino, Tiago; Zúquete, Joana; et al. "Exploring the strategies towards enhancing the thermoelectric performance in oxide materials". AVEIRO, 2022.
  4. Amirkhizi, Parisa; Gabriel Constantinescu; Lopes, Daniela V.; Miguel A. Vieira; Kovalevsky, Andrei. Corresponding author: Gabriel Constantinescu. "Exploring the High-Temperature Thermoelectric Performance of La-Substituted Ca3Co4O9 Bulk Ceramics". Marinha Grande, 2022.
    Published
  5. Constantinescu, Gabriel; Lopes, Daniela V.; Amir Khizi, Parisa; Vieira, Miguel A.; Kavaleuski, Andrei; Constantinescu, Gabriel; Lopes, Daniela V.; et al. Corresponding author: Constantinescu, Gabriel. "Exploring the high-temperature thermoelectric performance of la-substituted Ca3Co4O9 bulk ceramics". Paper presented in Materiais 2022 Congress, 2022.
    10.3390/materproc2022008068
  6. Constantinescu, Gabriel; Lopes, Daniela V.; Amir Khizi, Parisa; Vieira, Miguel A.; Kavaleuski, Andrei. "Exploring the high-temperature thermoelectric performance of la-substituted Ca3Co4O9 bulk ceramics". 2022.
    10.3390/materproc2022008068
  7. Kovalevsky, Andrei; Constantinescu, Gabriel; Lopes, Diogo; Ferreira, Nuno M.; Zakharchuk, Kiryl; Paulino, Tiago; Zúquete, Joana; et al. "Exploring the strategies towards enhancing the thermoelectric performance in oxide materials". 2022.
  8. Amirkhizi, Parisa; Behnam Ghader, Ali Asghar. "Determination of optimal time and temperature through Archimedes law for infiltrating glass phase into alumina block". Paper presented in 4th international conference on Research in science and technology, Saint Petersburg, 2016.
Conference poster
  1. Amirkhizi, Parisa; Maria A. Madre; Dura Oscar; Miguel Ángel Torres Portero; Sotelo, Andres; Kovalevsky, Andrei; Sh. Rasekh. Corresponding author: Maria A. Madre. "Improving thermoelectric properties of calcium manganites using co-doping strategy". Paper presented in 18th European Congress and Exhibition on Advanced Materials and Processes – FEMS EUROMAT 2025, 2025.
  2. Amirkhizi, Parisa; Maria A. Madre; Dura Oscar; Sotelo, Andres; Kovalevsky, Andrei; Sh. Rasekh. "Enhancement of thermoelectric performances of CaMnO3 through multiple doping in A- and B-sites". Paper presented in XIX th ECerS Conference / CERAMICS 2025 / 100th DKG Annual Meeting, 2025.
  3. Amirkhizi, Parisa; Maria A. Madre; Wang, H. C.; Miguel Ángel Torres Portero; Sotelo, Andres; Kovalevsky, Andrei; Sh. Rasekh. Corresponding author: Maria A. Madre. "Microstructure and thermoelectric properties of Ca3Co4O9/Ag multilayer composites". Paper presented in 4th Iberian Thermoelectric Workshop, 2025.
  4. Amirkhizi, Parisa; Maria A. Madre; Hongchao Wng; Miguel Ángel Torres Portero; Sotelo, Andres; Kovalevsky, Andrei; Sh. Rasekh. Corresponding author: Maria A. Madre. "Fabrication of multilayer textured Sr-doped Ca3Co4O9/Ag laminar composites". Paper presented in Eectroceramics XIX (2024), 2024.
  5. Amirkhizi, Parisa; Kovalevsky, Andrei; Sh. Rasekh. Corresponding author: Amirkhizi, Parisa. "Oxide-based Thermoelectric Modules for Waste Heat Harvesting". Paper presented in CICECO Jornadas (2023), 2023.
  6. Amirkhizi, Parisa; María A. Madre; Miguel Ángel Torres Portero; Sotelo, Andres; Kovalevsky, Andrei; Sh. Rasekh. Corresponding author: Amirkhizi, Parisa. "Fabrication and Characterization of Calcium Cobaltite and Calcium Manganite-Based Thermoelectric Module for Sustainable Energy Generation". Paper presented in AMATS (2023), 2023.
  7. Amirkhizi, Parisa; Sh. Rasekh; Kovalevsky, Andrei. Corresponding author: Amirkhizi, Parisa. "Enhancing Thermoelectric Properties of BaTiO3 Through Doping and Defect Chemistry Engineering". Paper presented in CICECO Jornadas (2022), 2022.
  8. Amirkhizi, Parisa. "Optimizing the thermoelectric properties via Doping and Processing by Taguchi plan". Paper presented in Jornadas CICECO, (2021), 2021.
Journal article
  1. P. Amirkhizi; M.A. Torres; M. Depriester; M. Hedayati; A. Sotelo; M.A. Madre; A.V. Kovalevsky; Sh. Rasekh. "Enhanced power factor in CaMnO3-based thermoelectric ceramics via co-doping". Materials Research Bulletin (2025): https://doi.org/10.1016/j.materresbull.2025.113529.
    10.1016/j.materresbull.2025.113529
  2. P. Amirkhizi; Sh. Rasekh; O.J. Dura; S.M. Mikhalev; J.R. Frade; A.V. Kovalevsky. "Exploring the potential for enhancing the thermoelectric properties of barium titanate-based materials through the B-site-specific doping and nominal A-site deficiency". Ceramics International (2025): https://doi.org/10.1016/j.ceramint.2025.05.282.
    10.1016/j.ceramint.2025.05.282
  3. P. Amirkhizi; M. A. Madre; G. Constantinescu; M. A. Torres; A. Sotelo; A. V. Kovalevsky; Sh. Rasekh. "Enhancing electrical properties in CaMnO3-based ceramics: The impact of single doping with different elements". Journal of the American Ceramic Society (2025): https://doi.org/10.1111/jace.20372.
    10.1111/jace.20372
  4. Amirkhizi, P.; Hedayati, M.; Madre, M.A.; Dura, O.J.; Torres, M.A.; Sotelo, A.; Kovalevsky, A.V.; Rasekh, Sh.. Corresponding author: Amirkhizi, P.. "Fabrication and testing of ceramic thermoelectric multi-leg module for high-temperature energy conversion". Journal of Alloys and Compounds 1013 (2025): 178628. https://doi.org/10.1016/j.jallcom.2025.178628.
    Open access • Published • 10.1016/j.jallcom.2025.178628
  5. P. Amirkhizi; M.A. Madre; O.J. Dura; M.A. Torres; A. Sotelo; A.V. Kovalevsky; Sh. Rasekh. "Enhancing thermoelectric performance of CaMnO3 through a Y- and La- dual-doping strategy". Ceramics International (2024): https://doi.org/10.1016/j.ceramint.2024.12.375.
    10.1016/j.ceramint.2024.12.375
  6. P. Amirkhizi; M.A. Madre; H.C. Wang; Z.H. Li; M.A. Torres; A. Sotelo; M. Hedayati; A.V. Kovalevsky; Sh. Rasekh. "Fabrication and thermoelectric properties of multilayer textured Sr-doped Ca3Co4O9/Ag laminar composites". Ceramics International (2024): https://doi.org/10.1016/j.ceramint.2024.09.030.
    10.1016/j.ceramint.2024.09.030
  7. Amirkhizi, P.; Madre, M. A.; Dura, O. J.; Torres, M. A.; Sotelo, A.; Kovalevsky, A.; Rasekh, Sh.. "Effect of laser wavelength on the thermoelectric properties of Bi1.6Pb0.4Sr2Co2O8 textured ceramics processed by LFZ". Ceramics International (2024): https://publons.com/wos-op/publon/66217657/.
    10.1016/J.CERAMINT.2024.02.281
  8. Amirkhizi, P.; Torres, M. A.; Dura, O. J.; Sotelo, A.; Madre, M. A.; Kovalevsky, A.; Rasekh, Sh.. "Effect of B-site doping on the thermoelectric performances of Ca0.97Y0.01 La0.01 Yb0.01Mn1-2xNbxMoxO3 thermoelectric ceramics". Journal of the European Ceramic Society (2024): https://publons.com/wos-op/publon/66075345/.
    10.1016/J.JEURCERAMSOC.2023.12.067
  9. Sotelo, A.; Amirkhizi, P.; Dura, O. J.; Garcia, G.; Asensio, A. C.; Torres, M. A.; Madre, M. A.; Kovalevsky, A.; Rasekh, Sh. "Significant reduction in processing time for Ca0.95Ce0.05MnO3 thermoelectric ceramics". Ceramics International (2023): https://publons.com/wos-op/publon/64890637/.
    10.1016/J.CERAMINT.2023.09.107
  10. Hedayati, Mehdi; Taheri-Nassaj, Ehsan; Yourdkhani, Amin; Borlaf, Mario; Rasekh, Shahed; Amirkhizi, Parisa; Sebastian, Tutu; et al. "Characterization and estimation of dielectric constant of electrospun BaTiO3 nanofibers at different calcination temperatures using theoretical models". Journal of the European Ceramic Society 41 2 (2021): 1299-1309. http://dx.doi.org/10.1016/j.jeurceramsoc.2020.09.072.
    10.1016/J.JEURCERAMSOC.2020.09.072
  11. Constantinescu, Gabriel; Rasekh, Shahed; Amirkhizi, Parisa; Lopes, Daniela V.; Vieira, Miguel A.; Kovalevsky, Andrei V.; Diez, Juan C.; et al. "Exploring the high-temperature electrical performance of Ca3-xLaxCo4O9 thermoelectric ceramics for moderate and low substitution levels". Symmetry 13 5 (2021): 782-782. http://hdl.handle.net/10773/31329.
    10.3390/sym13050782
  12. Constantinescu, Gabriel; Sarabando, Artur R.; Rasekh, Shahed; Lopes, Diogo; Sergiienko, Sergii; Amirkhizi, Parisa; Frade, Jorge R.; Kovalevsky, Andrei, V. "Redox-Promoted Tailoring of the High-Temperature Electrical Performance in Ca3Co4O9 Thermoelectric Materials by Metallic Cobalt Addition". Materials (2020): https://publons.com/wos-op/publon/29268696/.
    10.3390/MA13051060
Thesis / Dissertation
  1. Amirkhizi, Parisa. "A quest for high performance ceramic thermoelectric modules". PhD, 2025. http://hdl.handle.net/10773/45047.

Other

Dataset
  1. Amirkhizi, Parisa. Powder X-ray diffraction dataset for Ca0.98Y0.01La0.01MnO3. International Centre for Diffraction Data (ICDD) PDF Database. 2025.
  2. Amirkhizi, Parisa. Powder X-ray diffraction dataset for Ca0.94Y0.03La0.03MnO3. International Centre for Diffraction Data (ICDD) PDF Database. 2025.
  3. Amirkhizi, Parisa. Powder X-ray diffraction dataset for Ca0.9Y0.05La0.05MnO3. International Centre for Diffraction Data (ICDD) PDF Database. 2025.
Other output
  1. Next Generation Evolved Gas Analysis. 2021. Amirkhizi, Parisa.
  2. Xpert Highscore plus software for XRD Analysis. 2020. Amirkhizi, Parisa.
  3. IELTS. 2019. Amirkhizi, Parisa. http://ielts.ucles.org.uk.
  4. EPT. English Proficiency Test (680). 2018. Amirkhizi, Parisa. http://english.iau.ac.ir/ept.
  5. Matlab - Advanced. 2017. Amirkhizi, Parisa.
  6. Matlab - Fundamental. 2017. Amirkhizi, Parisa.
  7. TOLIMO. The national educational test. 2016. Amirkhizi, Parisa.
  8. Article writing workshop. 2014. Amirkhizi, Parisa.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2025/09/14 Use of fast preparation method to produce n- and p- thermoelectric legs and their integration into a thermoelectric module for power generation 18th European Congress and Exhibition on Advanced Materials and Processes – FEMS EUROMAT 2025
2025/08/31 Microstructural and thermoelectric properties modification induced by the laser wavelength on the Bi1.6Pb0.4Sr2Co2O8 textured ceramics produced by directional solidification XIX th ECerS Conference / CERAMICS 2025 / 100th DKG Annual Meeting
(Dresden, Germany)
2025/05/22 Fabrication and characterization of thermoelectric modules for power generation 4th Iberian Thermoelectric Workshop
(Castelló de la Plana , Spain)
2024 Enhancing Electrical Properties of Barium Titanate-based Ceramic Thermoelectrics: Comparing Solid State Technique and Spark Plasma Sintering ICNMSME (2024)
university of Aveiro (Aveiro, Portugal)
2024 Fabrication of thermoelectric module using legs produced through economic and easily scalable processes Eectroceramics XIX (2024)
Vilnius University (Lithuania)
2023 Drastic decrease of processing time in Ca0.95Ce0.05MnO3 thermoelectric ceramics ECXVI, (2023)
(Jaca, Spain)
2023 Fabrication and Characterization of Ceramics-based Thermoelectric Module for Renewable Energy Applications Research Summit 2023
university of Aveiro (Aveiro, Portugal)
2023 Waste Heat Harvesting Using Calcium Cobaltite and Calcium Manganite-Based Thermoelectric Modules
(Aveiro, Portugal)
2022 Tunning the Thermoelectric properties via Substitution and Defect Chemistry engineering by Taguchi plan 5th ICNMSME-(2022)
2022 Tunning the Thermoelectric properties via Substitution and Defect Chemistry engineering by Taguchi approach Research summit 2022
university of Aveiro (Aveiro, Portugal)
2021/07/08 A Quest for High Performance Ceramic Thermoelectric Modules
(Aveiro, Portugal)
2016/07/28 Determination of optimal time and temperature through Archimedes law for infiltrating glass phase into alumina block 4th international conference on Research in science and technology
Karin institute (saint petersburg, Russia)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2025/10/01 - Current Harvesting waste heat with ceramic thermoelectric composites towards sustainable energy conversion
Co-supervisor
Universidade de Aveiro CICECO, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2025/10/09 - 2025/10/10 Voluntary contribution to the organisation of CICECO Jornadas 2025, the annual scientific meeting of CICECO – Institute of Materials of Aveiro, supporting coordination of scientific sessions and participant interactions. (2025/10/09 - 2025/10/09)
Symposium (Other)
 Universidade de Aveiro CICECO, Portugal

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2026/02/02 - 2026/02/06 Participation in the MXene Certificate Course (2–6 February 2026), a specialised virtual training focused on MXene synthesis, advanced characterisation techniques (including Raman spectroscopy, electron microscopy, and XPS), electrochemical analysis, and materials applications.
Workshop
 MXene course
Drexel University College of Engineering, United States
2025/11/06 - 2025/11/07 Workshop on Energy Research
Workshop
Universidade de Aveiro, Portugal
2022/09/14 - 2022/09/16 An open innovation initiative designed to foster co-creation and the translation of scientific research into potential products and business ideas.
Workshop
 The CICECO Hackathon 2022
Universidade de Aveiro CICECO, Portugal
2021/03/04 - 2021/03/04 This webinar took place on 4th of March 2021, by Senol Gezgin entitled “Thermal Analysis under Humid Atmosphere”.
Seminar
NETZSCH-Gerätebau GmbH, Germany
2021/02/25 - 2021/02/25 This webinar took place on 25th of February 2021 entitled “Linseis THB Improved technology”.
Seminar
Linseis Messgeräte GmbH, Germany
2021/02/24 - 2021/02/24 This webinar took place on 24th of February 2021 entitled “TEM Sample Preparation”. In this tutorial Dr Sam Marks, who is the TEM product manager, presented the different approaches to TEM sample preparation, highlighting the advantages and disadvantages of the most common preparation techniques, providing useful hints and tips along the way.
Seminar
Oxford Instruments NanoAnalysis, United Kingdom
2021/02/23 - 2021/02/23 This webinar took place on 23rd of February 2021, by Ramon Arauz entitled “Simultaneous thermal analysis, Technique, Tips and Tricks”, this webinar had 3 part which I attended to part 1 measuring principal, Instrumentation + application.
Seminar
NETZSCH-Gerätebau GmbH, Germany
2021/02/16 - 2021/02/16 This webinar was presented on 16th of February 2021, by Professor Alicia Duran entitled “Towards an International Year of Glass in 2022”.
Seminar
2021/01/28 - 2021/01/28 This webinar took place on 28th of January 2021, by Dr. Juergen Blumm entitled “Next Generation Evolved Gas Analysis”, that was introduced state-of-the-art techniques which is combination of some analysis techniques with evolved gas analysis.
Seminar
NETZSCH-Gerätebau GmbH, Germany
2021/01/28 - 2021/01/28 This webinar was presented on 28th of January 2021, by Remi Andre entitled “Thermal Analysis and Calorimetry for the Characterization of Batteries”, explaining why thermal safety of batteries are important.
Seminar
SETARAM Instrumentation UK, United Kingdom
2020/09/02 - 2020/09/02 The webinar about how to use Ciencia Vitae en platform
Workshop
 Webinar CienciaVitae

Committee member

Activity description
Role 		Institution / Organization
2017/02 - 2018/12/23 Member of the editorial board of scientific and specialized journals and jury committee of conferences of Iran science and technology international academy.
Member
 Iran science and technology international academy, Iran

Scientific expedition

Activity description Institution / Organization
2023/10/15 - 2023/12/29 International research stay at University of Zaragoza Universidad de Zaragoza, Spain
2023/02/27 - 2023/06/11 International research stays, including two visits of approximately six months in total at the University of Zaragoza in the group of Andrés Sotelo Universidad de Zaragoza, Spain
Distinctions

Other distinction

2025 PhD degree with distinction and merit
Universidade de Aveiro, Portugal