???global.info.a_carregar???
Felipe Klein Fiorentin. Completed the Master in Mechanical Engineering in 2018/03/18 by Universidade do Estado de Santa Catarina (UDESC), Bachelor in Marine Engineering in 2018/01/20 by Universidade Federal de Santa Catarina (UFSC) and Bachelor in Mechanical Engineering in 2015/10/15 by Universidade do Estado de Santa Catarina (UDESC). Felipe was an exchange student at University of Calgary (UofC) for 18 months, where he attended 3 curricular semesters and was a undergraduate research fellow for 5 months. He attends the Doctoral Program in Mechanical Engineering (PRODEM) by Faculdade de Engenharia da Universidade do Porto (FEUP) since 2019/09/01. He is a research fellow in Instituto de Engenharia Mecanica e Gestao Industrial (INEGI). Published 6 articles in journals, participated as Master Student Fellow in 1 project, he was Scientific Initiation Fellow (BIC) at other 2 projects. He works in the areas of Engineering and Technology with emphasis on Mechanical Engineering, on the fields of vibration, fatigue and metallic additive manufacturing (MAM). In his professional activities interacted with 15 collaborators on co-authorship of scientific papers. In his curriculum Ciência Vitae the most frequent terms in the context of scientific and technological output are: Fatigue; Metallic Additive Manufacturing; Inconel; Model Updating; Modal Analysis; Ultra High Cycle Fatigue; High Cycle Fatigue; Fixturing System; Optimization; Mode Shape; FEM; Numerical Simulation; Vibrations; FEM; Milling; Time-domain Analysis; Surface Finish; Natural Frequencies; Roughness; Resonance; Dynamic Behaviour; PSO.
Read full resume ↓
Identification

Personal identification

Full name
Felipe Klein Fiorentin

Citation names

  • Fiorentin, Felipe Klein

Author identifiers

Ciência ID
6C13-A9AF-1456
ORCID iD
0000-0002-7352-8637

Email addresses

  • ffiorentin@inegi.up.pt (Professional)

Addresses

  • rua Dr. Roberto Frias , campus da FEUP , nº 400, 4200-465, Porto, Porto, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Environmental Engineering - Marine Engineering, Sea Vessels

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Education
Degree Classification
2019/09/01 - 2023/04/26
Concluded
 Engenharia Mecânica (Doutoramento)
Major in Fadiga / Fabrico Aditivo Metálico
Universidade do Porto Faculdade de Engenharia, Portugal
2015/01/07 - 2018/03/18
Concluded
 Mestrado Académico em Engenharia Mecânica (Master)
Major in Simulação Numérica
Universidade do Estado de Santa Catarina, Brazil
"A NUMERICAL STUDY OF SUPPORT POSITIONING FOR A MILLING PROCESS FOR A WORKPIECE WITH LOW STIFFNESS" (THESIS/DISSERTATION)
 17/20
2009/08/01 - 2018/01/20
Concluded
 Engenharia Naval (Bachelor)
Major in Engenharia Naval
Universidade Federal de Santa Catarina, Brazil
"SIMULAÇÃO NUMÉRICA DO COMPORTAMENTO DINÂMICO DE PEÇAS DELGADAS NO PROCESSO DE FRESAMENTO" (THESIS/DISSERTATION)
 8.0/10
2008/07/16 - 2015/10/15
Concluded
 Engenharia Mecânica (Bachelor)
Major in Engenharia Mecânica
Universidade do Estado de Santa Catarina, Brazil
"INFLUÊNCIA DA FREQUÊNCIA DE RESSONÂNCIA NA RUGOSIDADE DE UMA PEÇA FRESADA" (THESIS/DISSERTATION)
 8.1/10
2012/09/01 - 2013/12/30
Attended
 Bachelor of Science in Mechanical Engineering (Bachelor)
Major in Engenharia Mecânica
University of Calgary, Canada
 2.37/3.5
Affiliation

Science

Category
Host institution 		Employer
2018/03/19 - Current Researcher (Research) Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2014/03/01 - 2014/08/31 Research Trainee (Research) Universidade Federal de Santa Catarina, Brazil
2013/05/02 - 2013/09/30 Visiting Researcher (Research) University of Calgary, Canada
2011/02/07 - 2012/08/01 Research Trainee (Research) Universidade do Estado de Santa Catarina, Brazil

Teaching in Higher Education

Category
Host institution 		Employer
2010/02/01 - 2010/12/31 Tutor (University Teacher) Universidade do Estado de Santa Catarina, Brazil

Others

Category
Host institution 		Employer
2014/08/01 - 2015/01/31 Estagio em Desenvolvimento de produto Embraco, Brazil
2010/07/01 - 2011/12/31 Membro da Equipa UDESC Baja SAE (Velociraptor) Universidade do Estado de Santa Catarina, Brazil
Projects

Grant

Designation Funders
2017/08 - 2017/12 Programa Institucional de Bolsas de Estágio
00000
PIBE UFSC
Scientific Initiation Fellow
Universidade Federal de Santa Catarina, Brazil
 PIBE UFSC
2015/08 - 2017/07 Programa de Bolsas de Monitoria de Pós-Graduação
PROMOP
Master Student Fellow
Universidade do Estado de Santa Catarina, Brazil
Concluded
2012/09/01 - 2013/12/31 Ciencias sem Fronteiras - Graduação Sanduíche
ABA: 026003557.
Other
University of Calgary, Canada
 Conselho Nacional de Desenvolvimento Científico e Tecnológico
Concluded
2012/09 - 2013/12 Sandwich graduation (Science Without Borders)
302762
 Conselho Nacional de Desenvolvimento Científico e Tecnológico
2011/02 - 2012/08 Análise Estática de Sistemas de Fixação de Peças Empregando Posicionadores Flexíveis
000
ISSN 1983-8301
Scientific Initiation Fellow
Programa de Bolsas de Iniciação Científica da UDESC
Concluded
2010/02 - 2010/12 Monitoria de Cálculo 1 (UDESC)
N° 223/2005 -CONSUNI
Other
Universidade do Estado de Santa Catarina, Brazil
 UDESC CCT
Concluded
2010/02 - 2010/10 Tutor of Calculus 1 (UDESC)
0000
 Universidade do Estado de Santa Catarina Centro de Ciências Tecnológicas

Contract

Designation Funders
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Researcher
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book chapter
  1. Jorge Gil; Felipe Fiorentin; J. C. R. Pereira; A. M. P. de Jesus; Ana Reis. "Finite Element Analysis of Distortions, Residual Stresses and Residual Strains in Laser Powder Bed Fusion-Produced Components". 2022.
    10.1007/978-3-030-91847-7_14
Conference paper
  1. Fiorentin, Felipe Klein; Negri, Doglas; Joel Martins Crichigno Filho. "MODEL UPDATING USING SUPPORT STIFFNESS VARIATION APPLYING PARTICLE SWARM OPTIMIZATION (PSO)". Paper presented in 6 th International Symposium on Solid Mechanics, Joinville, 2017.
    Published
  2. Fiorentin, Felipe Klein; Joel Martins Crichigno Filho. "Estudo Analítico e Numérico de um Sistema de Fixação Ótimo para o Fresamento de Topo". Paper presented in CONEM 2016 (IX Congresso Nacional de Engenharia Mecânica), Fortaleza, 2016.
    Accepted
  3. Fiorentin, Felipe Klein; Joel Martins Crichigno Filho. "ANÁLISE ESTÁTICA DE SISTEMAS DE FIXAÇÃO DE PEÇAS FEMPREGANDO POSICIONADORES FLEXÍVEIS". Paper presented in 7º CONGRESSO BRASILEIRO DE ENGENHARIA DE FABRICAÇÃO, Itatiaia, 2013.
    Published
Journal article
  1. Felipe Klein Fiorentin; Luis Reis; Grzegorz Lesiuk; Ana Reis; Abílio de Jesus. "A Predictive Methodology for Temperature, Heat Generation and Transfer in Gigacycle Fatigue Testing". Metals (2023): https://doi.org/10.3390/met13030492.
    10.3390/met13030492
  2. "Fatigue Assessment of Inconel 625 Produced by Directed Energy Deposition from Miniaturized Specimens". Metals 12 1 (2022): 156-156. http://dx.doi.org/10.3390/met12010156.
    10.3390/met12010156
  3. "Numerical Modeling and Prediction of Residual Stresses in AISI 316L and 18Ni300 Steels Produced by Selective Laser Melting". Procedia Structural Integrity 34 (2021): 6-12. http://dx.doi.org/10.1016/j.prostr.2021.12.002.
    10.1016/j.prostr.2021.12.002
  4. Darabi, R.; Azinpour, E.; Fiorentin, F.K.; Abarca, M.J.; Cesar de Sá, J.; Dzugan, J.. "Experimental and computational analysis of additively manufactured tensile specimens: Assessment of localized-cooling rate and ductile fracture using the Gurson– Tvergaard–Needleman damage model". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85100522614&partnerID=MN8TOARS.
    10.1177/1464420721990049
  5. Fiorentin, F.K.; Oliveira, B.; Pereira, J.C.R.; Correia, J.A.F.O.; de Jesus, A.M.P.; Berto, F.. "Fatigue behaviour of metallic components obtained by topology optimization for additive manufacturing". Frattura ed Integrita Strutturale 15 55 (2021): 119-135. http://www.scopus.com/inward/record.url?eid=2-s2.0-85099517491&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.55.09
  6. Fiorentin, Felipe. "Experimental Study of a Hybrid Wave Energy Converter Integrated in a Harbor Breakwater". Journal of Marine Science and Engineering (2019): http://www.mdpi.com/2077-1312/7/2/33.
    10.3390/jmse7020033
  7. Negri, Doglas; Fiorentin, Felipe Klein; Crichigno Filho, Joel Martins. "A Model Updating Method for Plate Elements Using Particle Swarm Optimization (PSO), Modeling the Boundary Flexibility, Including Uncertainties on Material and Dimensional Properties". Latin American Journal of Solids and Structures 15 10 (2018): http://dx.doi.org/10.1590/1679-78254342.
    Open access • Published • 10.1590/1679-78254342
Thesis / Dissertation
  1. "Development of an Ultrasonic Frequency Equipment for Fatigue Testing". 2022. https://repositorio-aberto.up.pt/handle/10216/144559.
  2. "Fatigue behaviour of Inconel 625 produced by Directed Energy Deposition". 2021. https://repositorio-aberto.up.pt/handle/10216/134949.
  3. "Finite Element Analysis of Residual Stresses in Parts Manufactured by Laser Powder-Bed Fusion". 2020. https://repositorio-aberto.up.pt/handle/10216/128280.
  4. "Fatigue behaviour of Miniature Specimens Produced by Additive Manufacturing". 2019. https://repositorio-aberto.up.pt/handle/10216/122457.
  5. "Fatigue Behaviour of Metallic Components Obtained by Topology Optimization for Additive Manufacturing". 2019. https://repositorio-aberto.up.pt/handle/10216/122446.
  6. Fiorentin, Felipe Klein. "A NUMERICAL STUDY OF SUPPORT POSITIONING FOR A MILLING PROCESS FOR A WORKPIECE WITH LOW STIFFNESS". Master, Universidade do Estado de Santa Catarina, 2018. http://udesc.br/arquivos/cct/id_cpmenu/814/Disserta__o___Vers_o_Final___Felipe_Klein_Fiorentin_15235282049307_814.pdf.
  7. Fiorentin, Felipe Klein. "SIMULAÇÃO NUMÉRICA DO COMPORTAMENTO DINÂMICO DE PEÇAS DELGADAS NO PROCESSO DE FRESAMENTO". Degree, Universidade Federal de Santa Catarina, 2017. https://repositorio.ufsc.br/xmlui/handle/123456789/176962.
  8. Fiorentin, Felipe Klein. "INFLUÊNCIA DA FREQUÊNCIA DE RESSONÂNCIA NA RUGOSIDADE DE UMA PEÇA FRESADA". Degree, Universidade do Estado de Santa Catarina, 2015. http://sistemabu.udesc.br/pergamumweb/vinculos/000003/00000387.pdf.