???global.info.a_carregar???
Carla Moura obtained her PhD from the MIT-Portugal Program in Bioengineering (2016). In addition, she has a Master's Degree in Product Development (2011) and a degree in Biomechanics (2008), both from the Polytechnic Institute of Leiria. Her research activities started in 2009 when she became a member of the Centre for Rapid and Sustainable Product Development of the Polytechnic of Leiria (CDRSP-PLeiria). In her master, she developed a selector of biomaterials for biomedical applications. During this time, she had the opportunity to participate in and organise several international scientific conferences, such as VR@P and ICTE conferences, and be part of the BioFab network (thematic Network on Biomanufacturing: Materials, Processes and Simulation. After her master, she was accepted in the MIT-Portugal PhD Program in Bioengineering and won a FCT grant [SFRH/BD/73970/2010] to develop the work entitled "Design and fabrication of zonal cartilage constructs". She focussed her work on medical biotechnology, bioengineering, and biomaterials, particularly interested in the manipulation of biomaterials using mainly Additive Manufacturing Techniques combined with cells, such as mesenchymal stem cells, for the regeneration of cartilage. Afterwards, she returned to CDRSP-PLeiria as a post-doc in the MATIS project [CENTRO-01-0145-FEDER-000014 –3362], became part of the scientific council of the CDRSP-PLeiria and helped in the management of science of the research centre. From 2017 to 2022, she was a Guest Professor in the Physiotherapy Degree of the School of Health (PLeiria); from 2021-2022, she was a junior researcher of the CDRSP-PLeiria and responsible for the Biofabrication Lab of the CDRSP-PLeiria. Over the last years, she was part of several research projects, such as Biodiscus project [CENTRO-01-0247-FEDER-039969], Stimuli2Bioscaffolds [PTDC/EME-SIS/32554/2017], OptiBioScaffold [PTDC/EME-SIS/4446/2020] and InSilico4OCReg [PTDC/EME-SIS/0838/2021]. Since November 2022, she has been an assistant researcher at the Institute of Applied Research (I2A) of the Polytechnic Institute of Coimbra. She is the author of 1 awarded Portuguese Utility Model, 1 awarded national patent and 2 others submitted, in which one of them is under revision to internationalisation. She is the editor of 1 book, published 3 book chapters, 29 scientific papers, 21 conference proceedings, and she was Chair of a Session of the RESIM2022 international conference. Moreover, she was a reviewer for the Acta Biomaterialia journal and Biocybernetics & Biomedical Engineering journal and she was also part of the jury of 3 research grants. She has (co-)supervised 5 masters, 13 undergraduate and 4 PhD students.
Read full resume ↓
Identification

Personal identification

Full name
Carla Sofia Monteiro de Moura

Citation names

  • Moura, Carla

Author identifiers

Ciência ID
671C-8FEC-A14A
ORCID iD
0000-0003-2610-1005

Email addresses

  • carla.moura@ipc.pt (Professional)

Knowledge fields

  • Medical and Health Sciences - Medical Biotechnology - Biomaterials

Languages

Language Speaking Reading Writing Listening Peer-review
English Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2016
Concluded
 MIT-Portugal em Bioengenharia (Doutoramento)
Instituto Politécnico de Lisboa, Portugal
"Design and fabrication of zonal cartilage constructs" (THESIS/DISSERTATION)
 Pass with Distinction
2011
Concluded
 Programa Doutoral MIT-Portugal em Bioengenharia (Curso de doutoramento (conclusão de unidades curriculares))
Instituto Politécnico de Lisboa, Portugal

Universidade Nova de Lisboa, Portugal

Universidade do Minho, Portugal

Universidade de Coimbra, Portugal

Massachusetts Institute of Technology, United States
17 valores
2010
Concluded
 Mestrado em Engenharia da Concepção e Desenvolvimento de Produto (Mestrado)
Instituto Politécnico de Leiria, Portugal
"Expert System for Medical Applications" (THESIS/DISSERTATION)
 19 valores
2008
Concluded
 Biomecânica (Licenciatura)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
"Cadeiras de Rodas" (THESIS/DISSERTATION)
 15 Valores
Affiliation

Science

Category
Host institution 		Employer
2022/11/24 - Current Researcher (Research) Instituto Politécnico de Coimbra, Portugal
2021/07/01 - 2022/11/23 Contracted Researcher (Research) Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2017 - 2022 Invited Assistant (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal

Others

Category
Host institution 		Employer
2009/01/07 - 2021/06/30 Bolseiro do Investigação. Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2011/04/01 - 2016/01/04 Bolseiro de Investigação no âmbito do Projecto com a referência SFRH/BD/73970/2010. Fundação para a Ciência e a Tecnologia, Portugal
Projects

Grant

Designation Funders
2016 - 2020 MATIS: Materials and Sustainable Industrial Technologies
CENTRO-01-0145-FEDER-000014 –3362
Research Fellow
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Agência Nacional de Inovação SA
2016 - 2020 MATIS: Materials and Sustainable Industrial Technologies
CENTRO-01-0145-FEDER-000014 3362
 Agência Nacional de Inovação SA
2009 - 2010 Computacional modelling of bone structure - application to bone tissue engineering
PTDC/EME-PME/71436/2006
Research Fellow
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia

Contract

Designation Funders
2022/11/24 - Current "Não disponível"
DOI:10.54499/CEECINST/00077/2021/CP2798/CT0004
2022 - 2025 InSilico4OCReg - In silico models guiding in vitro biophysical stimulation of biomimetic hierarchical scaffolds: a computational modelling approach towards functional osteochondral regeneration
PTDC/EME-SIS/0838/2021
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia
2021 - 2024 OptiBioScaffold: Stimuli optimization in bi-tissue scaffolds: from mathematical and computational modelling to experimental validation
PTDC/EME-SIS/4446/2020
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2018/08/01 - 2022 Stimuli2Bioscaffolds: Stimuli optimization for BioScaffolds - from numerical modelling to in vitro tests
PTDC/EME-SIS/32554/2017
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2018/08/01 - 2021/07/31 Optimização de estímulos em BioScaffolds: da modelação numérica aos testes in vitro
PTDC/EME-SIS/32554/2017
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/06 - 2020/12/31 Stimuli2BioScaffolds - Stimuli modelling for BioScaffolds: from numerical modelling to in vitro tests
C492074784-00085914
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2011 - 2012 Internacional Research Exchange for Biomedical Devices Design and Prototyping (IREBID)
Grant agreement ID: 247476
Other
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Universitat de Girona, Spain

Rutgers The State University of New Jersey, United States

Instituto Tecnológico y de Estudios Superiores de Monterrey, Mexico

Università degli Studi di Brescia, Italy
Concluded
2009 - 2010 Rede IberoAmericana de Biofabricação: Materiais, Processos e Simulação / Thematic Network on Biomanufacturing: Materials, Processes and Simulation
208RT0340
Other
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro Tecnológico da Indústria de Moldes Ferramentas Especiais e Plásticos, Portugal

Centro de Investigaciones Ópticas, Argentina

Universidade Estadual de Campinas, Brazil

Centro de Tecnologia da Informação Renato Archer, Brazil

Universidade de São Paulo, Brazil

Instituto Nacional de Tecnologia, Brazil

Centro Brasileiro de Pesquisas Físicas, Brazil

Universidade de São Paulo Instituto de Ortopedia e Traumatologia, Brazil

Universidade Federal de São Paulo, Brazil

Universidad de la Habana, Cuba

Universidade de Santiago de Compostela, Spain

Instituto de Ciencia y Tecnología de Polímeros, Spain

Centro de Investigación en Materiales Avanzados Unidad Monterrey, Mexico

Universidad Nacional de Asunción, Paraguay

Universidad de Oriente, Venezuela

Universidad Simón Bolivar, Venezuela
Concluded

Other

Designation Funders
2019 - Current Biodiscus: Design and development of bioactive discs for the treatment of temporomandibular joint disorders
CENTRO-01-0247-FEDER-039969
Other
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Agência Nacional de Inovação SA
Ongoing
2016 - 2020 Stretchtronics: Soft and Stretchable Mechatronics for Wearable Devices: Fabrication, Implementation and Applications
CMUP-ERI/TIC/0021/2014
Other
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia

Carnegie Mellon Portugal Program
2017 - 2019 2Bio4cartilage: Integrated intervention programme for the prevention and treatment of cartilage damage
POCI-01-0145-FEDER-023423
Other
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Fundação para a Ciência e a Tecnologia
Outputs

Publications

Book
  1. Reddy, J. N.. Innovative Developments in Design and Manufacturing. Portugal: CRC Press. 2009.
    Published • 10.1201/9780203859476
Book chapter
  1. Cristiana Fernandes; Moura, Carla; Rita M.T. Ascenso; Sandra Amado; Nuno Alves; Paula Pascoal-Faria. "Comprehensive Review on Full Bone Regeneration through 3D Printing Approaches". In Design Engineering and Manufacturing. IntechOpen, 2020.
  2. Daniela Trindade; Moura, Carla; David Ângelo; Nuno Alves. "Functional Organisation and Associated Dysfunctions of the Temporomandibular Joint". In The Temporomandibular Joint: Structure, function and clinical significance. Nova Science Publishers, Inc, 2020.
  3. Cordeiro, Rachel; Mariana C. S. Vallejo; Marta Henriques; Filipe Antunes; Carla Moura (671C-8FEC-A14A); Cândida Malça; Morouço, Pedro. "Extração de fibras de celulose a partir de resíduos agroindustriais e a sua caracterização para aplicações na área da saúde". In Estratégias de Ensino e Sucesso Académico: Boas Práticas no Ensino Superior. 2020.
  4. Moura, C.S.; Bártolo, P.J.; Almeida, H.A.. "Knowledge based system for medical applications". 327-327. 2011.
  5. Moura, Carla. "Scaffolds para Engenharia de Tecidos". In Processos de Biofabricação, Rede IberoAmericana de Biofabricação: Materiais, Processes e Simulação. 2009.
  6. Moura, Carla. "Processos Estereolitográficos". In Processos de Biofabricação, Rede IberoAmericana de Biofabricação: Materiais, Processes e Simulação. 2009.
Conference abstract
  1. Oliveira, Beatriz; Moura, Carla; C. Malça; Henriques, Marta. Corresponding author: Moura, Carla. "Hybrid hydrogel as a delivery vehicle for bioactive ions to enhance bone regeneration". Paper presented in 12th International Conference Mechanical Technologies and Structural Materials (MTSM¿23), Split, 2023.
    Published
  2. Cordeiro, Rachel; ALVES, NUNO; Maurício, Ana Colette; Moura, Carla. "Muli-layer hybrid scaffolds for articular cartilage repair". Paper presented in 33rd Annual Conference of the European Society for Biomaterials - ESB2023, Davos, 2023.
  3. Cordeiro, R.; Maurício, Ana Colette; ALVES, NUNO; Moura, Carla. "Structural biomimicry of the deep zone of articular cartilage". Paper presented in Third Meeting PhD in Biomedical Sciences, 2023.
  4. Oliveira, Beatriz; Moura, Carla; Cândida Malça; Coutinho, Joana T.; Henriques, Marta. Corresponding author: Moura, Carla. "Magnesium-based biodegradable scaffolds for bone tissue regeneration". Paper presented in X Congress of the Portuguese Society of Biomechanics (CNB'23), Figueira da Foz, 2023.
    Published
  5. Fábio Filipe Ferreira Garrudo; Silva, João C.; Rodrigues, Carlos A.V.; Meneses, João; Moura, Carla; Nogueira, Diogo E.S.; Carvalho, Marta S.; et al. "Electroconductive platforms for the electrical stimulation of stem cells - an approach to the design of artificial human tissue microenvironments.". Paper presented in Polymer Connect 2022, Rome, 2022.
  6. Fernandes, Cristiana; Trindade, Daniela; Silva, Rui; Moura, Carla; Morouço, Pedro; Veloso, António; Alves, Nuno. "The New Era of Additive Manufactured Orthopaedic Devices: Materials and Their Mechanical Performance". Paper presented in Materiais 2022, 2022.
    10.3390/materproc2022008006
  7. Cordeiro, Rachel; Meneses, João; Dourado, Fernando; Veloso, Ana C.; Pascoal-Faria, Paula; Alves, Nuno; Moura, Carla. "Multifunctional Bacterial Cellulose–Chitosan Tape: An Innovative Substitute for PVC". Paper presented in Materiais 2022, 2022.
    10.3390/materproc2022008001
  8. Pascoal-Faria, Paula; Meneses, João; Marcelino, Pedro; Silva, João Carlos; Moura, Carla; Abhishek Datta; Frederico Castelo Ferreira; ALVES, NUNO. Corresponding author: Pascoal-Faria, Paula. "Numerical Modelling Impact in the Design and Development of Tissue Engineering Systems". Paper presented in RESIM Conference 2022, Marinha Grande, 2022.
    Published
  9. João F. Gil; Moura, Carla; Vania Silverio; Gil Gonçalves. "Engineering self-regulating construct-bioreactor to model de the dynamic microenvironments of realistic tumors". Paper presented in 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2021.
    Published
  10. Cordeiro, Rachel; Meneses, João; Carla Moura (671C-8FEC-A14A); Ana Veloso; Pascoal-Faria, Paula; ALVES, NUNO. "Bacterial Cellulose-Chitosan Eco-tapes". Paper presented in International Conference on Direct Digital Manufacturing and Polymers (ICDDMAP2021), 2021.
  11. João Carlos Silva; Carvalho, Marta; Moura, Carla; GARRUDO, F F F; Cláudia L. da Silva; Joaquim M.S. Cabral; Linhardt, Robert J.; Frederico Castelo Ferreira. "Estratégias de bioengenharia baseadas em células estaminais e "scaffolds" para a regeneração da cartilagem articular". Paper presented in Encontro Ciência 20, Lisboa (online), 2020.
    Accepted
  12. Trindade, Daniela; Carla Moura (671C-8FEC-A14A); Ângelo, David Faustino; ALVES, NUNO. "Development of a Biocompatible Hydrogel based on Native TMJ Disc Extracellular Matrix". Paper presented in International Conference on Advanced Research on Sustainable Intelligent Manufacturing (RESIM 2020), 2020.
  13. Cordeiro, Rachel; Meneses, João; Pascoal-Faria, Paula; Carla Moura (671C-8FEC-A14A); ALVES, NUNO. "Eco-friendly flagging tape". Paper presented in International Conference on Advanced Research on Sustainable Intelligent Manufacturing (RESIM 2020), 2020.
    10.1504/wrstsd.2021.10040395
  14. Trindade, Daniela; Moura, Carla; Francisco, Luís; Campos, Carlos; Vieira, Milena; Morouço, Pedro; Ângelo, David Faustino; ALVES, NUNO. "Multi-material Scaffolds for Temporomandibular Joint Disc Implants". Paper presented in 6th IEEE Portuguese Meeting on Bioengineering (ENBENG-2019), Lisboa, 2019.
  15. Cordeiro, Rachel; Mariana C. S. Vallejo; Paulo Dias; Carla Moura (671C-8FEC-A14A); Inês Vicente; Cristina Galhano; Marta Henriques. "Extration and evaluation of industrial-waste derived cellulose for novel bioapplications". Paper presented in International Conference on Natural Fibers, Porto, 2019.
Conference paper
  1. Mafalda S. Santos; Rachel Cordeiro; Carla S. Moura; Cláudia L. da Silva; Frederico Castelo Ferreira; João C. Silva; Marta S. Carvalho. "Decellularized Extracellular Matrix Polycaprolactone/Chitosan Composite Nanofibrous Scaffolds for Periodontal Tissue Engineering". 2023.
    10.3390/IOCN2023-14495
  2. Geoffrey R. Mitchell; Nuno Alves; Carla Moura; Joana Coutinho. "Statement of Peer Review". 2022.
    10.3390/materproc2022008154
  3. Paula Pascoal-Faria; João Meneses; Abhishek Datta; João Silva; Frederico Ferreira; Carla Moura; Nuno Alves. "Cell Culture Bioreactor Manufacturing, from Material Selection to Numerical Models". 2022.
    10.3390/materproc2022008050
  4. Joana T. Coutinho; João Curado; Ricardo Marques; Cândida Pereira; Carla Moura; Nuno Alves. "Magnesium Biodegradable Scaffolds: A Preliminary Study". 2022.
    10.3390/materproc2022008027
  5. Daniela Trindade; Cecília R. C. Calado; Nuno Alves; Carla Moura. "Ovine Model as a Temporomandibular Disc Substitute: Characterisation and the Outcomes of Freezing Storage". 2022.
    10.3390/materproc2022008017
  6. Pedro Marcelino; João Carlos Silva; Carla Moura; João Meneses; Nuno Alves; Paula Pascoal-Faria; Frederico Castelo Ferreira. "Development of 3D-Printed Scaffolds with Mathematically Defined Curvature for Osteochondral Defect Repair Applications". 2022.
    10.3390/materproc2022008011
  7. Marcelino, Pedro ; Silva, João C.; Moura, Carla; Meneses, João ; Garrudo, Fábio ; Alves, Nuno; Pascoal-Faria, Paula; Ferreira, Frederico Castelo. "Design and Fabrication of Curvature-Featuring Scaffolds for Osteochondral Regeneration". Paper presented in 7th Edition of the Symposium on Computational Tools for Direct Digital Manufacturing (CT4DDM); 19th International Conference of Numerical Analysis ans Applied Mathematics (ICNAAM 2021), 2021.
  8. Morouço, P.; Moura, Carla; Francisco, L.; Ângelo, D.; Alves, N.. "Biodegradable multi-material implants for temporomandibular joint disc repair". Paper presented in 8º Congresso Nacional de Biomecânica, Covilhã, 2019.
    Published
  9. Moura, Carla; Biscaia, S.; Viana, T.; Bártolo, P.J.; Da Silva, C.L.; Cabral, J.S.; Ferreira, F.C.. "Adhesion, proliferation and distribution of human mesenchymal stem/stromal cells (MSCs) in Poly(e-caprolactone) (PCL) scaffolds with different pore sizes". 2013.
  10. Moura, Carla; Bártolo, P.J.; Almeida, H.A.. "Biomaterials Selector for Biomanufacturing". 2011.
  11. Moura, C.S.; Bártolo, P.J.; Almeida, H.A.. "Intelligent biopolymer selector system for medical applications". 2010.
  12. Moura, Carla; Bastos, C.; Videira, C.; Bento, R.; Bártolo, P.J.; Alves, N.; Capela, C.; Mendes, A.; Almeida, H.A.. "InsulJet: estojo diabético". Paper presented in 1as Jornadas do Curso de Mestrado em Concepção e Desenvolvimento de Produto, 2009.
  13. Moura, Carla; Bártolo, P.J.; Almeida, H.A.. "Selector de biomateriais poliméricos para aplicações médicas". Paper presented in Selector de biomateriais poliméricos para aplicações médicas, 2009.
  14. Moura, Carla; Bártolo, P.J.; Almeida, H.A.. "Ferramenta computacional de apoio à decisão em Aplicações Médicas". Paper presented in Engenharia 2009 - Inovação e Desenvolvimento, Covilhã, 2009.
Conference poster
  1. Bicho, Joel; Magalhães, Simão; Cordeiro, R.; Moura, Carla; Malça, Cândida Maria. "Impact of the Processing Technique on Polylactic acid/hydroxyapatite scaffolds". Paper presented in IV Congresso Digital de Nanobiotecnologia e Bioengenharia, 2023.
  2. Oliveira, Beatriz; C. Malça; Moura, Carla. Corresponding author: Oliveira, Beatriz. "Impact of the addition of magnesium oxide and magnesium sulphate on scaffolds to Bone Tissue Engineering". Paper presented in IV Digital Conference on Nanobiotechnology and Bioengineering, 2023.
  3. Trindade, Daniela; Calado, Cecília; Maurício, Ana Colette; Alves, Nuno; Moura, Carla. "Impact of freezing storage in the properties of the ovine temporomadibular disc". Paper presented in Third Meeting of the PhD in Biomedical Sciences, 2023.
  4. Silva, João Carlos; Marcelino, Pedro; Meneses, João; Barbosa, Frederico; Moura, Carla; Joaquim M.S. Cabral; Morgado, Jorge; et al. "Electroconductive PCL-PEDOT:PSS 3D-extruded scaffolds for electrical stimulation of bone cells". Paper presented in TERMIS - European Chapter Meeting 2023, 2023.
  5. Marcelino, Pedro; Silva, João Carlos; Moura, Carla; Meneses, João; ALVES, NUNO; Pascoal-Faria, Paula; Frederico Castelo Ferreira. Corresponding author: Silva, João Carlos. "Design, fabrication and computer modelling of curvature-featuring scaffolds for osteochondral repair". Paper presented in 2nd iBB Workshop, 2022.
  6. Curado, João; Trindade, Daniela; Cordeiro, Rachel; Coutinho, Joana ; Moura, Carla; Malça, Cândida Maria. "Magnesium: novel strategy for 3D osteo-scaffold". Paper presented in Jornadas de Engenharia Biomédica 2022, 2022.
  7. Moura, Carla. "Production of hybrid 3D scaffolds: reinforcing poly(¿-caprolactone)-graphene printed scaffolds with bacterial cellulose based hydrogel". Paper presented in 6th International Conference on Multifunctional, Hybrid and Nanomaterials, 2019.
  8. Trindade, Daniela; Moura, Carla; Francisco, Luís; Campos, Carlos; Vieira, Milena; Morouço, Pedro; Ângelo, David; ALVES, NUNO. "Multi-material scaffolds for temporomandibular joint disc implants". Paper presented in ENBENG 2019, 2019.
  9. Moura, Carla. "Reinforcing extruded-bases poly(¿-caprolactone) scaffolds with cellulose nanofibers". Paper presented in 8th World Congress of Biomechanics, 2018.
  10. Moura, Carla. "Poly(ethylene glycol) diacrylate-poly(E-caprolactone) as a multi-material structure for TMJ repair". Paper presented in 14th World Congress of the International Cartilage Repair Society, 2018.
  11. Moura, Carla. "Extracellular matrix decorated porous polycaprolactone scaffolds for bone tissue engineering". Paper presented in 26th Annual Meeting of the European Orthopaedic Research Society, 2018.
  12. Moura, Carla. "Poly (e-caprolactone) scaffolds combined with extruded perfusion bioreactor prototypes as an integrated platform for articular cartilage tissue engineering". Paper presented in TERMIS EU 2016 Meeting – Tissue Engineering and Regenerative Medicine International Society, 2016.
  13. Moura, Carla. "Computational biopolymer selector system for tissue engineering applications". Paper presented in TERMIS EU 2010 Meeting – Tissue Engineering and Regenerative Medicine International Society, 2010.
  14. Moura, Carla. "Selector de Biomateriais Poliméricos e Biocerâmicos para Aplicações Médicas Específicas". Paper presented in V Congresso Internacional de Biomateriais, 2010.
  15. Moura, Carla. "Ferramenta computacional de apoio à decisão em Aplicações Médicas". Paper presented in Engenharia 2009 - Inovação e Desenvolvimento, 2009.
Journal article
  1. Marcelino, Pedro; Silva, João Carlos; Moura, Carla; Meneses, João; Cordeiro, Rachel; Alves, Nuno; Pascoal-Faria, Paula; Ferreira, Frederico Castelo. "A Novel Approach for Design and Manufacturing of Curvature-Featuring Scaffolds for Osteochondral Repair". Polymers 15 9 (2023): 2129. http://dx.doi.org/10.3390/polym15092129.
    10.3390/polym15092129
  2. Gil, João Ferreira; Moura, Carla; Silverio, Vania; Gonçalves, Gil; Santos, Hélder A.. "Cancer Models on Chip: Paving the Way to Large-Scale Trial Applications". Advanced Materials (2023): http://dx.doi.org/10.1002/adma.202300692.
    Published • 10.1002/adma.202300692
  3. Rachel Cordeiro; Rui D. Alvites; Ana C. Sousa; Bruna Lopes; Patrícia Sousa; Ana C. Maurício; Nuno Alves; Carla Moura. "Cellulose-Based Scaffolds: A Comparative Study for Potential Application in Articular Cartilage". Polymers (2023): https://doi.org/10.3390/polym15030781.
    10.3390/polym15030781
  4. Rachel Cordeiro; Marta Henriques; João C. Silva; Filipe Antunes; Nuno Alves; Carla Moura. "Corncob Cellulose Scaffolds: A New Sustainable Temporary Implant for Cartilage Replacement". Journal of Functional Biomaterials (2022): https://doi.org/10.3390/jfb13020063.
    10.3390/jfb13020063
  5. Daniela Trindade; Nuno Alves; Carla Moura. "From Animal to Human: (Re)using Acellular Extracellular Matrices for Temporomandibular Disc Substitution". Journal of Functional Biomaterials (2022): https://doi.org/10.3390/jfb13020061.
    10.3390/jfb13020061
  6. Sara Biscaia; João C. Silva; Carla Moura; Tânia Viana; Ana Tojeira; Geoffrey R. Mitchell; Paula Pascoal-Faria; Frederico Castelo Ferreira; Nuno Alves. "Additive Manufactured Poly(e-caprolactone)-graphene Scaffolds: Lamellar Crystal Orientation, Mechanical Properties and Biological Performance". Polymers 14 9 (2022): 1669-1669. https://doi.org/10.3390/polym14091669.
    10.3390/polym14091669
  7. Biscaia, Sara; Silva, João C.; Moura, Carla; Viana, Tânia; Tojeira, Ana ; Mitchell, Geoffrey R.; Pascoal-Faria, Paula; Ferreira, Frederico Castelo; Alves, Nuno. "Additive manufactured poly(e-caprolactone)-graphene scaffolds: lamellar crystal orientation, mechanical properties and biological performance". Polymers - Special Issue "Polymeric Materials for Biomedical Applications" (2022):
    Accepted • 10.3390/polym14091669
  8. Trindade, Daniela; Moura, Carla; Calado, Cecília; Ângelo, David; Alves, Nuno. "Development of a biocompatible hydrogel based on native temporomandibular joint extracellular matrix powder". World Review of Science, Technology and Sustainable Development 1 1 (2022): 1. http://dx.doi.org/10.1504/wrstsd.2022.10044167.
    10.1504/wrstsd.2022.10044167
  9. Cordeiro, Rachel; Meneses, João; Dourado, Fernando; Pascoal Faria, Paula; Moura, Carla; Alves, Nuno. "Eco-friendly flagging tape". World Review of Science, Technology and Sustainable Development 1 1 (2022): 1. http://dx.doi.org/10.1504/wrstsd.2021.10040395.
    10.1504/wrstsd.2021.10040395
  10. Ângelo, David Faustino; Wang, Yadong; Morouc¸o, Pedro; Monje, Florencio; Mónico, Lisete; González-Garcia, Raúl; Moura, Carla; et al. "A randomized controlled preclinical trial on 3 interposal temporomandibular joint disc implants: TEMPOJIMS—Phase 2". Journal of Tissue Engineering and Regenerative Medicine 15 10 (2021): 852-868. http://dx.doi.org/10.1002/term.3230.
    10.1002/term.3230
  11. Daniela Trindade; Rachel Cordeiro; Henrique Cardoso José; David Faustino Ângelo; Nuno Alves; Carla Moura. "Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue Engineering". Biomolecules 11 7 (2021): 933-933. https://doi.org/10.3390/biom11070933.
    10.3390/biom11070933
  12. Vallejo, Mariana; Cordeiro, Rachel; Dias, Paulo A. N.; Moura, Carla; Henriques, Marta; Seabra, Inês J.; Malça, Cândida Maria; Morouço, Pedro. "Recovery and evaluation of cellulose from agroindustrial residues of corn, grape, pomegranate, strawberry-tree fruit and fava". Bioresources and Bioprocessing 8 1 (2021): http://dx.doi.org/10.1186/s40643-021-00377-3.
    10.1186/s40643-021-00377-3
  13. Silva, João C.; Moura, Carla S.; Borrecho, Gonçalo; Alves de Matos, António P.; Cabral, Joaquim M. S.; Linhardt, Robert J.; Ferreira, Frederico Castelo. "Effects of glycosaminoglycan supplementation in the chondrogenic differentiation of bone marrow- and synovial- derived mesenchymal stem/stromal cells on 3D-extruded poly (e-caprolactone) scaffolds". International Journal of Polymeric Materials and Polymeric Biomaterials 70 3 (2021): 207-222. http://dx.doi.org/10.1080/00914037.2019.1706511.
    Published • 10.1080/00914037.2019.1706511
  14. Moura, Carla; Trindade, Daniela; Vieira, Milena; Francisco, Luís; Ângelo, David Faustino; Alves, Nuno. "Multi-Material Implants for Temporomandibular Joint Disc Repair: Tailored Additive Manufacturing Production". Frontiers in Bioengineering and Biotechnology 8 (2020): http://dx.doi.org/10.3389/fbioe.2020.00342.
    10.3389/fbioe.2020.00342
  15. Meneses, João ; Silva, João C.; Fernandes, Sofia R. ; Datta, Abhishek; Ferreira, Frederico Castelo; Moura, Carla; Amado, Sandra; Alves, Nuno; Pascoal-Faria, Paula. "A Multimodal Stimulation Cell Culture Bioreactor for Tissue Engineering: A Numerical Modelling Approach". Polymers 12 4 (2020): 940-940. https://doi.org/10.3390/polym12040940.
    10.3390/polym12040940
  16. Moura, Carla Sofia; Silva, João Carlos; Faria, Sofia; Fernandes, Paulo Rui; da Silva, Cláudia Lobato; Cabral, Joaquim Manuel Sampaio; Linhardt, Robert; Bártolo, Paulo Jorge; Ferreira, Frederico Castelo. "Chondrogenic differentiation of mesenchymal stem/stromal cells on 3D porous poly (e-caprolactone) scaffolds: Effects of material alkaline treatment and chondroitin sulfate supplementation". Journal of Bioscience and Bioengineering (2020): http://dx.doi.org/10.1016/j.jbiosc.2020.01.004.
    10.1016/j.jbiosc.2020.01.004
  17. Silva, João C.; Carvalho, Marta S.; Udangawa, Ranodhi N.; Moura, Carla S.; Cabral, Joaquim M. S.; L. da Silva, Cláudia; Ferreira, Frederico Castelo; Vashishth, Deepak; Linhardt, Robert J.. "Extracellular matrix decorated polycaprolactone scaffolds for improved mesenchymal stem/stromal cell osteogenesis towards a patient-tailored bone tissue engineering approach". Journal of Biomedical Materials Research Part B: Applied Biomaterials (2020): http://dx.doi.org/10.1002/jbm.b.34554.
    10.1002/jbm.b.34554
  18. Pattanashetti, Nandini A.; Biscaia, Sara; Moura, Carla; Mitchell, Geoffrey R.; Kariduraganavar, Mahadevappa Y.. "Development of novel 3D scaffolds using BioExtruder by the incorporation of silica into polycaprolactone matrix for bone tissue engineering". Materials Today Communications 21 (2019): 100651. http://dx.doi.org/10.1016/j.mtcomm.2019.100651.
    10.1016/j.mtcomm.2019.100651
  19. Silva, João C.; Moura, Carla S.; Borrecho, Gonçalo; Matos, António P. Alves; da Silva, Cláudia L.; Cabral, Joaquim M. S.; Bártolo, Paulo J.; Linhardt, Robert J.; Ferreira, Frederico Castelo. "Extruded Bioreactor Perfusion Culture Supports the Chondrogenic Differentiation of Human Mesenchymal Stem/Stromal Cells in 3D Porous Poly(¿-Caprolactone) Scaffolds". Biotechnology Journal (2019): 1900078. http://dx.doi.org/10.1002/biot.201900078.
    10.1002/biot.201900078
  20. Moura, Carla; Santos-Rocha, Rita; Franco, Susana; Malça, Cândida; Galhano, Cristina; Henriques, Marta; Morouço, Pedro. "A Brief Review on Processes for Cartilage Repair". Applied Mechanics and Materials 890 (2019): 229-236. http://dx.doi.org/10.4028/www.scientific.net/amm.890.229.
    10.4028/www.scientific.net/amm.890.229
  21. Pascoal-Faria, Paula; Castelo Ferreira, Pedro; Datta, Abhishek; Amado, Sandra; Moura, Carla; Alves, Nuno. "Electrical Stimulation Optimization in Bioreactors for Tissue Engineering Applications". Applied Mechanics and Materials 890 (2019): 314-323. http://dx.doi.org/10.4028/www.scientific.net/amm.890.314.
    10.4028/www.scientific.net/amm.890.314
  22. Lopes, João; Fonseca, Rita; Viana, Tânia; Fernandes, Cristiana; Morouço, Pedro; Moura, Carla; Biscaia, Sara. "Characterization of Biocompatible Poly(Ethylene Glycol)-Dimethacrylate Hydrogels for Tissue Engineering". Applied Mechanics and Materials 890 (2019): 290-300. http://dx.doi.org/10.4028/www.scientific.net/amm.890.290.
    10.4028/www.scientific.net/amm.890.290
  23. Ângelo, D.F.; Gil, F.M.; González-García, R.; Mónico, L.; Sousa, R.; Neto, L.; Caldeira, I.; et al. "Effects of bilateral discectomy and bilateral discopexy on black Merino sheep rumination kinematics: TEMPOJIMS – phase 1 – pilot blinded, randomized preclinical study". Journal of Cranio-Maxillofacial Surgery 46 2 (2018): 346-355. http://www.scopus.com/inward/record.url?eid=2-s2.0-85038831000&partnerID=MN8TOARS.
    10.1016/j.jcms.2017.11.022
  24. Ângelo, D.F.; Morouço, P.; Monje Gil, F.; Mónico, L.; González-Gárcia, R.; Sousa, R.; Neto, L.; et al. "Preclinical randomized controlled trial of bilateral discectomy versus bilateral discopexy in Black Merino sheep temporomandibular joint: TEMPOJIMS - Phase 1- histologic, imaging and body weight results". Journal of Cranio-Maxillofacial Surgery (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85042598654&partnerID=MN8TOARS.
    10.1016/j.jcms.2018.01.006
  25. Ângelo DF; Monje FG; González-García R; Little CB; Mónico L; Pinho M; Santos FA; et al. "Bioengineered Temporomandibular Joint Disk Implants: Study Protocol for a Two-Phase Exploratory Randomized Preclinical Pilot Trial in 18 Black Merino Sheep (TEMPOJIMS).". JMIR research protocols (2017): http://europepmc.org/abstract/med/28254733.
    10.2196/resprot.6779
  26. Silva, J.C.; Moura, C.S.; Alves, N.; Cabral, J.M.S.; Ferreira, F.C.. "Effects of Different Fibre Alignments and Bioactive Coatings on Mesenchymal Stem/Stromal Cell Adhesion and Proliferation in Poly (¿-caprolactone) Scaffolds towards Cartilage Repair". Procedia Manufacturing 12 (2017): 132-140. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029844276&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.08.034
  27. Francisco, L.; Moura, C.; Viana, T.; Ângelo, D.; Morouço, P.; Alves, N.. "Poly(¿-caprolactone) and Polyethylene Glycol Diacrylate-based Scaffolds for TMJ Bioengineered Disc Implants". Procedia Manufacturing 12 (2017): 291-297. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029865481&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.08.032
  28. Morouço, P.; Biscaia, S.; Viana, T.; Franco, M.; Malça, C.; Mateus, A.; Moura, C.; et al. "Fabrication of poly(¿-caprolactone) scaffolds reinforced with cellulose nanofibers, with and without the addition of hydroxyapatite nanoparticles". BioMed Research International 2016 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84996790728&partnerID=MN8TOARS.
    10.1155/2016/1596157
  29. Moura, Carla Sofia; Ferreira, Frederico Castelo; Bártolo, Paulo Jorge. "Comparison of Three-dimensional Extruded Poly (¿-Caprolactone) and Polylactic acid Scaffolds with Pore size Variation". Procedia CIRP 49 (2016): 209-212. http://dx.doi.org/10.1016/j.procir.2015.11.018.
    10.1016/j.procir.2015.11.018
  30. Moura, Carla; Silva, Cláudia Lobato da; Bártolo, Paulo Jorge; Ferreira, Frederico Castelo. "Combination of 3D Extruded-based Poly (¿-caprolactone) Scaffolds with Mesenchymal Stem/Stromal Cells: Strategy Optimization". Procedia Engineering 110 (2015): 122-127. http://dx.doi.org/10.1016/j.proeng.2015.07.019.
    10.1016/j.proeng.2015.07.019
  31. Figueiredo, Lígia; Moura, Carla; Pinto, Luís F.V.; Ferreira, Frederico Castelo; Rodrigues, Alexandra. "Processing and Characterization of 3D Dense Chitosan Pieces, for Orthopedic Applications, by Adding Plasticizers". Procedia Engineering 110 (2015): 175-182. http://dx.doi.org/10.1016/j.proeng.2015.06.182.
    10.1016/j.proeng.2015.06.182

Intellectual property

Patent
  1. Moura, Carla; Trindade, Daniela; Cordeiro, Rachel; Alves, Nuno; Pascoal-Faria, Paula; Meneses João. 2022. "Biorreator de Perfusão de Câmara Dupla. Número INPI: 117857".
    Pending
  2. Moura, Carla; Trindade, Daniela; Cordeiro, Rachel; ALVES, NUNO; Pascoal-Faria, Paula; Meneses, João. 2022. "Biorreator de Perfusão de Câmara Dupla". Portugal.
    Pending
  3. Moura, Carla. 2021. "Dispositivo para Avaliação de Compatibilidade Transfusional e de Reação Antigénio-Anticorpo".
    Granted/Issued
  4. Moura, Carla. 2021. "Sistema integrado de bioreactor e processo de controlo, aprendizagem e monitorização da cultura celular utilizando o mesmo".
    Pending
  5. 2021. "Integrated Bioreactor System and Process for Control, Learning and Monitoring of Cell Culture using the same".
    Pending
  6. Moura, Carla. 2010. "Modelo de Utilidade Nacional: "Estojo diabético com sistema integrado de determinação de glicemia capilar, caneta motorizada para administração e refrigeração"".
    Granted/Issued
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/09/21 Biomanufacturing strategies towards bone and cartilage tissue regeneration International Conference on Mechanical Technologies and Structural Materials
(Split, Croatia)
2022/03/25 Additive Manufacturing for Temporomandibular Joint Tissue Engineering Stem Cell Bioengineering Research Group
2017/04/19 Aplicação da Engenharia de Tecidos na reparação e regeneração de cartilagem, communication presented at the VI Jornadas de Biomecânica 2017, Escola Superior de Tecnologia e Gestão, Instituto Politécnico de Leiria,Leiria
2015 Comparison of three-dimensional extruded poly (e-caprolactone) and polylactic acid scaffolds with pore size variation The Second CIRP Conference on Biomanufacturing
(Manchester, United Kingdom)
2014/11/22 Supporting stem cells towards cartilage regeneration, communication presented at the 3as Jornadas do GECA e no 6º Curso teórico-prático de Cartilagem Articular, organized by Grupo de Estudo da Cartilagem, Prevenção e Tratamento da Artrose – GECA,Teatro Aberto, Lisbon
2014 Strategy optimization of the combination of 3D extruded-based poly(¿-caprolactone) scaffolds with Mesenchymal Stem Cells towards Cartilage Regeneration 3rd International Conference on Tissue Science & Regenerative Medicine
(Valência, Spain)
2013 Adhesion, proliferation and distribution of human mesenchymal stem/stromal cells (MSCs) in poly(¿-caprolactone) (PCL) scaffolds with different pore sizes International Conference on Advanced Research in Virtual and Rapid Prototyping
(Leiria, Portugal)
2009/12/19 InsulJet: estojo diabético 1as Jornadas do Curso de Mestrado em Concepção e Desenvolvimento de Produto
(Leiria, Portugal)
2009/12/19 Selector de biomateriais poliméricos para aplicações médicas 1as Jornadas do Curso de Mestrado em Concepção e Desenvolvimento de Produto
(Leiria, Portugal)
2009/12/18 Ferramenta computacional de apoio à decisão de selecção de biomateriais para aplicações médicas, communication presented at the course of Biomateriais: Caracterização, Processamento e Simulação organized by the Centre for Rapid and Sustainable Product Development supported by the Thematic Network on Biomanufacturing: Materials, Processes and Simulation financed by CYTED – Ciencia Y Tecnologia Para El Desarrollo, Marinha Grande, Portugal
2009/11/27 Ferramenta computacional de apoio à decisão em Aplicações Médicas Engenharia 2009 - Inovação e Desenvolvimento
(Covilhã)
2009/06/29 Design Biomimético de Scaffolds para a Engenharia de Tecidos, H.A. Almeida and P.J. Bártolo, paper presented at the Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, Spain

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2022/01 - Current Multiphase co-culture on multi-layer hybrid scaffolds for articular cartilage repair
Supervisor
 Ciências Biomédicas (PhD)
Universidade do Porto Instituto de Ciências Biomédicas Abel Salazar, Portugal
2022/01 - Current In situ Injectable Decellularized-based Hydrogel for Temporomandibular Disc Repair
Supervisor
 Ciências Biomédicas (PhD)
Universidade do Porto Instituto de Ciências Biomédicas Abel Salazar, Portugal
2021/06/01 - Current Engineering self-regulating construct-bioreactor to model the dynamic microenvironments of realistic tumors
Co-supervisor
 Nanociências e Nanotecnologia (PhD)
Universidade de Aveiro, Portugal
2022/03 - 2022/06 Biomaterials for bone regeneration
Supervisor
 Engenharia Biomédica - Bioeletrónica (Degree)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2022/03 - 2022/06 Perfusion bioreactor optimization for cartilage regeneration
Supervisor
 Instrumentação Biomédica (Other)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2019/09 - 2021/06/01 Development of tissue-engineered temporomandibular discs based on xenogeneic extracellular matrices
Supervisor
 Engenharia Biomédica (Master)
2020/03 - 2020/06 Novel scaffolds design inspired in nature for bone applications
Supervisor
 Bioengenharia (Degree)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2020/03 - 2020/06 Otimização do desenho de scaffolds para substituição do disco da articulação temporomandibular
Supervisor
 Bioengenharia (Degree)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2020/03 - 2020/06 Celulose Bacteriana em função de uma sociedade mais ecológica
Supervisor
 Bioengenharia (Degree)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2020/01/21 - 2020/02/19 Introdução à Gestão de Projetos Científicos
Supervisor
 Engenharia e Gestão Industrial (Other)
2018/11/05 - 2019/09 Biopolímeros para otimização de scaffolds em aplicações biomédicas: extração e caracterização
Co-supervisor
2018/09 - 2019/09 Scaffolds and bioreactor characterization towards bone regeneration: proposal of a computer-aided design model
Co-supervisor
 Mestrado em Gestão de Sistemas de Informação Médica (Master)
2019/03/04 - 2019/07/19 Relatório do Estágio desenvolvido no âmbito da Componente de Formação em Contexto de Trabalho
Supervisor
 Curso Técnico Superior Profissional em Instrumentação Biomédica (Other)
2019/02 - 2019/06 Produção e avaliação de propriedades de scaffolds fotopolimerizávels
Supervisor
2019/02 - 2019/06 Caracterização de celulose vegetal para aplicação em bioscaffolds
Supervisor
2019/02/11 - 2019/03/01 Introduction to additive Manufacturing of Biomaterials and its characterization
Supervisor
2018/05/07 - 2018/07/10 Características mecânicas e morfológicas do Osso
Supervisor
2018/05/07 - 2018/07/10 Desenvolvimento de implantes temporários para TMJ
Supervisor
2018 - 2018 Polyethylene glycol diacrylate-based hydrogels: monitorization of its mechanical properties for optimal storing conditions, a new optimization and introductory tests under native conditions
Supervisor
2017 - 2017/09/18 Research and development of implants for temporomandibular joint disc repair
Supervisor

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2021/03 - 2022/04 Organizing committee of the Materiais 2022 conference (2022/04/10 - 2022/04/13)
Conference (Member of the Organising Committee)
 Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2017/05/15 - 2017/05/18 International Conference on Direct Digital Manufacturing and Polymers (ICDDMAP2017), CDRSP-IPLeiria, Portugal (2017/05/15 - 2017/05/18)
2016/12/14 - 2016/12/17 International Conference on Advanced Research in Sustainable Intelligent Manufacturing (RESIM2016), ESTG-IPLeiria, Portugal (2016/12/14 - 2016/12/17)
2016/07/20 - 2016/07/20 Direct Digital Manufacturing from Forests (DDMfForest), Edíficio da Resinagem, Marinha Grande, Portugal (2016/07/20 - 2016/07/20)
2016/05/18 - 2016/05/18 Direct Digital Manufacturing for Medicine (DDM4Med), Edíficio da Resinagem, Marinha Grande, Portugal (2016/05/18 - 2016/05/18)
2015/12/11 - 2015/12/11 5th Advanced Course on Regenerative Medicine, CDRsp-IPLeiria, Marinha Grande, Portugal (2015/12/11 - 2015/12/11)
2013/06/06 - 2013/06/08 3rd International Conference on Tissue Engineering (ICTE 2013), Image in Movement Museum (m|i|mo), Leiria, Portugal (2013/06/06 - 2013/06/08)
2009/12/17 - 2009/12/18 International Course of “Biomateriais: Caracterização, Processamento e Simulação”, supported by the Thematic Network on Biomanufacturing: Materials, Processes and Simulation financed by CYTED – Ciencia Y Tecnologia Para El Desarrollo, Marinha Grande, Portugal (2009/12/17 - 2009/12/18)
2009/10/06 - 2009/10/10 4th International Conference on Advanced Research in Virtual and Rapid Prototyping (VR@P2009), Leiria, Portugal (2009/10/06 - 2009/10/10)
2009/07/09 - 2009/07/11 ICTE 2009 International Conference on Tissue Engineering An ECCOMAS Thematic Conference, Leiria, Portugal (2009/07/09 - 2009/07/11)

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2017/06/05 - 2017/06/09 Regenerative medicine essentials: from the fundamentals to the future Annual one-week summer course, taught by prominent experts, provides attendees a foundation in this exciting field through lectures, presentations and special hands-on workshops.
Other
 Regenerative medicine essentials: from the fundamentals to the future
Wake Forest University School of Medicine, United States
2013/11/22 - 2013/11/23 2as Jornadas do GECA e no 5º Curso Teórico-Prático (organized by the Grupo de Estudo da Cartilagem, Prevenção e Tratamento da Artrose – GECA, Teatro Aberto, Lisboa, Portugal)
2013/06/26 - 2013/06/26 E3 Forum - Education, Employment & Entrepreneurship Conference (Pavilhão do Conhecimento – Ciência Viva, Lisboa, Portugal)
2012/11/22 - 2012/11/23 Biomedical Engineering Workshop (organized by the International Research Exchange for Biomedical Devices Design and Prototyping (IREBID) e Instituto Nacional de Biofabricação (INCT-Biofabris), Campinas, Brasil)
2012/06/28 - 2012/06/28 E3 Forum - Education, Employment & Entrepreneurship (Pavilhão do Conhecimento – Ciência Viva, Lisboa, Portugal)
2012/02/16 - 2012/02/16 Tecnologias Avançadas de Fabrico Aditivo workshop (organized by the Centre for Rapid and Sustainable Product Development, Leiria, Portugal)
2012/02/08 - 2012/02/09 2nd Advanced Course on Regenerative Medicine (organized by the Centre for Rapid and Sustainable Product Development, Leiria, Portugal)
2011/09/28 - 2011/10/01 5th International Conference on Advanced Research in Virtual and Rapid Prototyping (VR@P2011) (organized by the Centre for Rapid and Sustainable Product Development, Leiria, Portugal)
2011/06/02 - 2011/06/04 2nd International Conference on Tissue Engineering an ECCOMAS Thematic Conference (ICTE2011) (organized by the Centre for Rapid and Sustainable Product Development, and by Instituto Superior Técnico, Lisboa, Portugal)
2010/10/28 - 2010/10/29 Medicina Regenerativa: Células, Biomateriais e Estratégias para Regeneração Óssea e Cartilaginosa (organized by the Centre for Rapid and Sustainable Product Development, Polythecnic Institue of Leiria, Marinha Grande, Portugal)
2010/05/14 - 2010/05/15 Biomaterials e Regenerative Medicine (organized by Sociedade Portuguesa de Materiais (Divisão de Biomateriais) and by Núcleo de Estudantes de Materiais da Universidade de Aveiro, Aveiro University, Portugal)
2010/05/06 - 2010/05/06 Workshop Anual do CDRSP (Marinha Grande, Portugal)
2010/04/22 - 2010/04/22 NanoMedicine: the way for the future (organized by the Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Marinha Grande, Portugal)
2010/04/15 - 2010/04/15 Porta Aberta ao Cientista/Empresário (organized by the Portuguese Institute of Industrial Property and by the Polytechnic Institute of Leiria, School of Technology and Management, Portugal)
2010/04/15 - 2010/04/15 Redacção de Reinvindicações (organized by the Portuguese Institute of Industrial Property and by the Polytechnic Institute of Leiria, School of Technology and Management, Portugal)
2009/12/03 - 2009/12/03 Requisitos de Patenteabilidade (organized by the Portuguese Institute of Industrial Property and by the Polytechnic Institute of Leiria, School of Technology and Management, Portugal)
2009/12/03 - 2009/12/03 Pesquisa: Informação Tecnológica (organized by the Portuguese Institute of Industrial Property and by the Polytechnic Institute of Leiria, School of Technology and Management, Portugal)
2009/11/12 - 2009/11/12 Pedido Provisório de Patente e a sua Conversão em Pedido Definitivo (organized by the Portuguese Institute of Industrial Property and the Polytechnic Institute of Leiria, Schoold of Technology and Management, Portugal)
2009/11/12 - 2009/11/12 Fundamentos em PI – Direitos Tecnológicos (organized by the Portuguese Institute of Industrial Property and by the Polytechnic Institute of Leiria, School of Technology and Management, Portugal)
2009/11/06 - 2009/11/07 I Jornadas de enfermagem perioperatório do Norte (Vila Nova de Gaia, Portugal)
2008/12/18 - 2008/12/19 Projecto e Fabrico de Implantes para Aplicações Médicas (organized by the Instituto Politécnico de Leiria)
2007/03/22 - 2007/03/22 Empreendedorismo-Integrado (seminar under the initiative of the road - Show Escolas, organized by Academia dos Empreendedores, Leiria, Portugal)
2007/02/08 - 2007/02/09 2º Encontro Nacional de Biomecânica
Congress

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2023/12/04 PH-Sensitive Multifunctional Coatings for Metallic Implants
(Thesis) Main arguer
 Cristiana Simões Lourenço (Master)
Universidade Nova de Lisboa, Portugal
2023/12/04 Magnesium-Based Biodegradable Scaffolds for Bone Tissue Regeneration
Supervisor
 Beatriz Catarino Oliveira (Master)
Universidade Nova de Lisboa, Portugal
2023/02/13 Tissue Engineering: development of biomaterials and celular therapies in clinical practice
Thesis Member
 Fernando Guedes (PhD)
Universidade do Porto, Portugal
2020/11/27 Prova probatória
(Thesis) Arguer
 Ana Catarina Soares de Sousa (PhD)
Universidade do Porto Instituto de Ciências Biomédicas Abel Salazar, Portugal
2017/07/11 Novel Nanocomposite Biomaterials to Control Cell Adhesion Constança Caldeira Rodrigues Júnior (Master)

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2017 - 2022 Biofísica, Licenciatura em Fisioterapia (Assistente Convidado, Escola Superior de Saúde, IPLeiria)
2017 - 2022 Estudo do Movimento Humano, Licenciatura em Fisioterapia (Assistente Convidado, Escola Superior de Saúde, IPLeiria)
2015 - 2016 Tecnologias de Materiais, Mestrado em Engenharia Biomédica (docente, Instituto Superior Técnico, Universidade de Lisboa)

Journal scientific committee

Journal title (ISSN) Publisher
2022/03 - 2022/09/25 Guest-Editor of the Special Issue "Polymer-Based Materials for Tissue Engineering and Regenerative Medicine" (2073-4360) Polymers
Distinctions

Award

2019 Winner of "Os melhores do Portugal Tecnológico" with Easy Blood Crossmatch, of Exame Informática, in the category: Innovation
2011 Bolsa de Doutoramento FCT (SFRH/BD/73970/2010)
Fundação para a Ciência e a Tecnologia, Portugal
2010 Menção Honrosa of the 2nd Edition of the Contest "Mais vale perder um minuto na vida, do que a vida num minuto" regarding the following thematic areas "Impacto da Prevenção Rodoviária" and "Legislação"