???global.info.a_carregar???
M. Augusta Neto received the Mechanical Engineering Degree with the final grade of 16/20 from the Faculty of Sciences and Technology at the University of Coimbra (FCTUC) in July of 1995 and in the month of Jun of the year 1998 finished the Master’s degree in Mechanical Engineering with the final grade of Very Good, in the same University. She received the PhD degree in Mechanical Engineering from the same institution in March of 2006, in the field of Structural Mechanics, under the scientific supervision of Profs R.P. Leal and J.A.C. Ambrósio. The research study received the prize awarded of the best PhD Thesis on Computational Mechanics 2006 given by the Portuguese Association of Theoretical, Applied and Computational Mechanics (APMTAC). Later in 2013, she made part of student team that won the regional competition and got in second in the national competition Poliempreende. After received the PhD, M. Augusta Neto becomes an integrated member of the research unit Centre for Mechanical Engineering, Materials and Processes (CEMMPRE) and received a Postdoctoral fellowship to perform research at the Mechanical and Aerospace Engineering Department of the Utah State University. the Postdoctoral (SFRH/BPD/32272/2006) Research fellow was supported by the Foundation for Science and Technology (FCT) under competitive research grants. The topic addressed in that research work lead to the development of a software able to perform analysis and optimization of heterogeneous materials using the variational asymptotic method for unit cell homogenization and was developed under the scientific supervision of Prof. Wenbin Yu., https://engineering.purdue.edu/AAE/people/ptProfile?resource_id=93761, actually he is Professor on the School of Aeronautics and Astronautics at the Purdue University. She was the Principal Investigator of a national project in Co-Promotion with the industry, T.P.C. - ANCA – Implant for trochanteric fractures, especially for reverse obliquity fractures, supported by QREN-I&D in Co-promotion under the supervision of National Innovation Agency, which started in Jun of 2013 and ended in 2015. Between 2011 and 2013, she also participated as investigator of the national research project, PTDC/SAL-BEB/108658/2008 – Clinical and Biomechanical Evaluation of Dental Implants Subject to Platform Switching, supported by the national Foundation for Science and Technology. Additionally to the research activity, she performed works of consultancy and/or provision of specialized services: 1) in 2006/2007, she was member of the multifunctional technological development team of the, SODECIA-Technologic Center; 2) in 2008/2009, she was member of the multifunctional technological development team integrated in the Project FLOW (Future Lives in Ocean Waves), MARTIFER ENERGY; 3) in 2010/2011, she was member of the consultancy team for the LIFT STANDARDS (Elevadores Padrão); 4) in 2012 she was member of the consultancy team for the XRW company. Even though she performed research activity, she wrote and published some considerable work and in 2015 published on international book with the title Engineering Computation of Structures: the Finite Element Method, https://link.springer.com/book/10.1007/978-3-319-17710-6#about, that has more than 19k downloads. Published also more than 40 papers on International Journal with Scientific Referees, seven International chapter books, 2 papers in International Journal without referees, 5 papers in National Journals with referees, 63 papers on proceedings of international conferences, 24 paper on proceedings of national conferences. Since March of 2006, Augusta Neto is Assistant Professor at the Department of Mechanical Engineering, FCTUC and has been teaching several classes: Solid Mechanics; Automatic Computation of Structures; Structural Mechanics; Strength of Materials. Beside classes, she was involved on the supervision of several Mechanical Engineering MSc and PhD students and one PhD Dentistery.
Identification

Personal identification

Full name
Maria Augusta Neto

Citation names

  • Neto, Maria
  • Neto, M. A.
  • M.A. Neto
  • M. A. Neto
  • Augusta Neto

Author identifiers

Ciência ID
611C-06B0-2C0C
ORCID iD
0000-0003-3030-0146
Researcher Id
A-9625-2010
Scopus Author Id
12645865200

Languages

Language Speaking Reading Writing Listening Peer-review
French Elementary (A2) Upper intermediate (B2) Elementary (A2) Intermediate (B1)
English Upper intermediate (B2) Upper intermediate (B2) Upper intermediate (B2) Upper intermediate (B2) Upper intermediate (B2)
Spanish; Castilian Upper intermediate (B2) Upper intermediate (B2) Elementary (A2) Upper intermediate (B2) Upper intermediate (B2)
Education
Degree Classification
2006 - 2007
Concluded
SFRH/BPD/32272/2006 at the Mechanical and Aerospace Engineering Departement (Pós-doutoramento)
Utah State University, United States
2002 - 2006
Concluded
Mechanical Engineering (Doutoramento)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Optimization of a complex flexible multibody systems with composite materials" (THESIS/DISSERTATION)
Distinção e Louvor
1995/10 - 1998/06
Concluded
Ciências de Engenharia Mecânica (Mestrado)
Major in Mecânica Estrutural
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Muito Bom
1989/10 - 1995/06
Concluded
Engenharia Mecânica (Licenciatura)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
16/20
Affiliation

Teaching in Higher Education

Category
Host institution
Employer
2023/12/05 - Current Associate Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2006 - 2023/12/04 Assistant Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1998 - 2006 Assistant (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1995 - 1998 Trainee Assistant (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Projects

Grant

Designation Funders
2012 - 2018 Clinical study and finite element analysis of the use of dental implants in the posterior mandibular areas for support on distal-extension removable partial dentures SFRH/BD/82442/2011
SFRH/BD/82442/2011
PhD Student Fellow
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded

Contract

Designation Funders
2019/01/01 - 2019/12/31 Centre for Mechanical Engineering
UID/EMS/00285/2019
Universidade de Coimbra, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013/06 - 2015/06 QREN- SI I&DT em Co-Promoção – Projeto 30146_T.P.C. - ANCA – Implant for trochanteric fractures, especially for reverse obliquity fractures.
QREN T.P.C – Anca 30146.
Principal investigator
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Concluded
2010/03 - 2013/03 PTDC/SAL-BEB/108658/2008-Clinical and Biomechanical Evaluation of Dental Implants Subject to Platform Switching
PTDC/SAL-BEB/108658/2008
PTDC/SAL-BEB/108658/2008
Researcher
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Strategic Project - UI 285 - 2011-2012
PEst-C/EME/UI0285/2011
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book
  1. Neto, M. A.; Amaro, A.M.; Roseiro, L.M.; Cirne, J.S.; Leal, R.P.; Neto, Maria. Engineering computation of Structures: the finite element method. 2015.
    10.1007/978-3-319-17710-6
Book chapter
  1. P. N. B. Reis; A. Messias; J. C. Ramos; M. A. Neto; A. Amaro. "Impact Response of Materials for Use in Mouthguards". 2023.
    10.1007/978-3-031-47790-4_5
  2. Maria A. Neto; Luis M. Roseiro; Maria F. Paulino; Ana M. Amaro. "Finite Element Comparison of Two Implants for the Treatment of Unstable Trochanteric Femur Fractures". 2020.
    10.1007/978-3-030-31635-8_178
  3. Ana M. Amaro; Luis Roseiro; Maria F. Paulino; Maria A. Neto. "Experimental Assessment of Knee Arthrodesis". 2020.
    10.1007/978-3-030-31635-8_174
  4. Maria A. Neto; Luis M. Roseiro; Maria F. Paulino; Ana M. Amaro. "Numerical Evaluation of the Knee Arthrodesis Using a Modified External Fixator". 2020.
    10.1007/978-3-030-31635-8_177
  5. Ana Messias; Pedro Nicolau; Fernando Guerra; Ana Amaro; Luís Roseiro; Maria Augusta Neto. "Residual Ridge Resorption in Mandibular Kennedy Class I Denture Wearers: Proposal of a Pressure-Induced Mechanism Based on a Finite Element Analysis". 2020.
    10.1007/978-3-030-31635-8_176
  6. Ana Messias; Pedro Nicolau; Fernando Guerra; Ana Amaro; Luís Roseiro; Maria Augusta Neto. "Implant-Assisted Removable Partial Dentures in Mandibular Kennedy Class I Patients: The Impact of Implant Positioning". 2020.
    10.1007/978-3-030-31635-8_175
  7. Messias, A; Rocha, S; Calha, N; Nicolau, P; Guerra, F; Neto, M. A.. "Effect of repeated tightening and loosening cycles of prosthetic screws in the micromovements of the abutment-implant assembly: A pilot study". In Biodental Engineering III, 27-32. CRC Press, 2014.
    10.1201/b17071-7
  8. Roseiro, Luis; Neto, M.A.. "Optimal Configuration of Uniplanar-Unilateral External Fixators in Tibia Fractures". In Intelligent Systems, Control and Automation: Science and Engineering, 461-468. Springer Netherlands, 2012.
    10.1007/978-94-007-4722-7_43
  9. Rodrigues, A.T.; Neto, M.A.; Nicolau, C.P.. "Micromovement measurements of endosseous dental implants with 3D Digital Image Correlation (DIC) method". In Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, 273-278. 2011.
  10. Neto, M. A.; Ambrósio, J.A.C.; Ambrósio, J.. "Flexible Multibody dynamics or large rotations in finite element analysis". In Proceedings of the Tenth International Conference on Computational Structures Technology. Civil-Comp Press, 2010.
    Published • 10.4203/csets.25.7
Conference abstract
  1. Lopes, V. M.; Roseiro, L.M.; Amaro, A. M.. "Digital images correlation of two internal fixation implants during treatment of femur neck fractures". Paper presented in 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 5th Conference on Image and Visualization, Bonn, 2021.
    Published
  2. Amaro, A.M.; Neto, M. A.; Reis, P.N.B.; Amaro, A. M.. "Mechanical characterization of different types of aluminium foams at high strain rates". Paper presented in 5th International Conference on Mechanics of Composites, Madrid, 2019.
    Published
  3. Messias, A.; Roseiro, L.M.; Neto, M. A.; Amaro, A. M.; Guerra, F.; Nicolau, P.. "Experimental evaluation of implant-assisted mandibular kennedy class I removable partial denture". Paper presented in 27th Annual Scientific Meeting of the European Association for Osseointegration, Vienna, 2018.
  4. Amaro, A. M.; Paulo, N.B.R.; Neto, M. A.; Loureiro, A.J.R.. "Repair delamination in composite laminates by screw". Paper presented in 3rd International Conference on Mechanics of Composites, 2017.
    Published
  5. Cruz, R.; Paulino, M. F.; Roseiro, L.M.; Moita, F.; Neto, M. A.; Amaro, A. M.. "Avaliação Experimental Da Indução De Micromovimentos Para Estimulação óssea, Promovidos Por Um Sistema Eletromecânico Acoplado a Um Fixador Externo". Paper presented in 37º Congresso da Sociedade Portuguesa de Ortopedia e Traumatologia, 2017.
  6. Messias, A.; Calha, N.; Martinho, B.; Neto, M. A.; Nicolau, P.; Guerra, F.. "Comparison of displacements and strain distribution in curved and straight implant-supported 4-unit zirconia frameworks". Paper presented in 25th Annual scientific meeting of the European Association for Osseointegration, Paris, 2016.
  7. Dias, B.S.M.; Amaro, A.M.; Cirne, J.S.; Reis, P.N.B.; Neto, M. A.. "Mechanical response of composite laminates at high strain rates: Effect of hostile solutions". Paper presented in 18th International Conference on Composite Structures, Lisboa, 2015.
  8. Maranha, V.; Martins, J. C.; Roseiro, L.M.; Amaro, A.M.; Neto, M. A.. "Numerical and Experimental Analysis of a Trochanteric Plate of Contention in Standard and Osteoporotic Bone". Paper presented in International Conference on Tissue Engineering, 2015.
  9. Paulino, M. F.; Amaro, A. M.; Roseiro, L.M.; Carvalhais, P.; Neto, M. A.. "Influence of External Fixator Material in Micromovements of the Bone Callus". Paper presented in VI International Conference on Computational Bioengineering, 2015.
    Published
  10. Lopes, J.M.; Messias, A.; Roseiro, L.M.; Neto, M. A.; Nicolau, P.. "Elaboração de modelo numérico e experimental individualizado em classes I de Kennedy". Paper presented in XXXV Congresso Anual SPEMD, 2015.
  11. Nogueira, T. F. C. S; Amaro, A.M.; Reis, P.N.B.; Louro, C.; Neto, M. A.; Reis, R. A. S.. "Composite laminates aged by oil solutions: Impact strength". Paper presented in 1st International Conference on Mechanics of Composites, 2014.
  12. Neto, M. A.; Ambrósio, J. A. C; Roseiro, L.M.; Amaro, A.M.. "Active vibration control of SAR antena". Paper presented in New Advances in the Nonlinear Dynamics and Control of Composites for Smart Engineering Design, Senigallia, 2013.
  13. Amaro, A.M.; Reis, P.N.B.; Neto, M. A.. "Effects of hostiles solutions on glass/epoxy composites". Paper presented in 17th International Conference on Composite Structures ICCS17, 2013.
  14. Amaro, A.M.; Reis, P.N.B.; De Moura, M.F.S.F.; Neto, M. A.; Neto, M.A.. "Influence of open holes on composites subjected to low velocity impacts". Paper presented in 17th International Conference on Composite Structures ICCS17, Porto, 2013.
    10.1016/j.compstruct.2012.09.041
  15. Neto, M. A.; Ambrósio, J. A. C; Amaro, A.M.; Roseiro, L.M.. "Active Vibration Control of Satellite Panels". Paper presented in ECCOMAS Multibody Dynamics, Zagreb, 2013.
  16. Neto, M. A.; Yu, W.; Leal, R.P.. "Composite Material Design of one and two-dimensional structures using the variational asymptotic method for unit cell homogenization,". Paper presented in 2nd International Conference on Engineering Optimization, 2010.
  17. Neto, M. A.; Ambrósio, J.A.C.; Leal, R. P.; Yu, Wenbin. "Blades Design of a Wind Turbine using Flexible Multibody Modelling, International Conference on Renewable Energies and Power Quality". Paper presented in International Conference on Renewable Energies and Power Quality- ICREPQ, Valencia, 2009.
  18. Neto, M. A.; Ambrósio, J. A. C; Leal, R. P.. "Body reference frames and mass matrix diagonalization on Modelling flexible multibody systems". Paper presented in III International Conference on Advances in Computational Multibody Dynamics, Milão, 2007.
Conference paper
  1. Vidinha, H.; Branco, R.; Neto, M.A.; Amaro, A.M.; Reis, P.N.B.; Costa, J.D.. "Failure mechanisms of GRFP after long term exposure to seawater". 2023.
    10.1016/j.prostr.2023.07.139
  2. Luís Cacho; Bernardo Alves; Amílcar Ramalho; Augusta Neto; Teresa Vieira; Gonçalo Rodrigues. "Micromechanical Modeling of the Material Impact in the Feedstock Filament Properties for Indirect Additive Manufacturing (MEX)". 2022.
    10.3390/materproc2022008038
  3. Pinto, M. L. R.; Lopes, V.M.; Neto, M.A.; Roseiro, L.M.; Amaro, A. M.. "Experimental Comparison of two Internal Fixation Implants in the Treatment of Femur Neck Fractures". Paper presented in 9º Congresso Nacional de Biomecânica, Porto, 2021.
  4. Nolasco, S.; Roseiro, L.M.; Neto, M. A.; Castro, M.A.; Amaro, A.M.. "Análise de Vibrações Induzidas ao Sistema Mão-Braço Na prática de Badminton". Paper presented in 9º Congresso Nacional de Biomecânica, Porto, 2021.
  5. A.M.Amaro; Reis, P.N.. "Mechanical characterization of different types of aluminium foams at high strain rates". Paper presented in 5th International Conference on Mechanics of Composites, Lisboa, 2019.
  6. Paulino, M.F.; Roseiro, L.M.; Balacó, I.; Alves, C.; Neto, M. A.; A. M. Amaro. "Análise experimental do uso de 1 ou 2 placas de osteossíntese na estabilização de osteotomias do fémur". Paper presented in 8º Congresso Nacional de Biomecânica, 2019.
    10.14488/enegep2017_tn_sto_247_427_33060
  7. Paulino, M.F.; Pinto, L.; Roseiro, L.M.; Dias, J.P.; Neto, M. A.; Amaro, Ana. "Avaliação da pressão plantar em ginastas com diferentes superfícies de contacto". Paper presented in 8º Congresso Nacional de Biomecânica, 2019.
  8. Amaro, A. M.; Neto, M. A.; Loureiro, A.J.R.; Silva, M.P.; Reis, P.N.B.. "Repair Delaminations in Carbon/epoxy Laminates". Paper presented in International Conference on Materials Science and Manufacturing Engineering, 2018.
  9. Kamocka,; Amaro, A.M.; Reis, P.N.B.; Neto, M. A.; Cirne, J.S.. "Effect of hostile solutions on the viscoelastic behaviour of carbon/epoxy laminates". Paper presented in 6th International Conference on Integrity - Reliability – Failure, Lisboa, 2018.
  10. Messias, A.; Neto, M. A.; Nicolau, P.; Guerra, F.; Roseiro, L.M.; Amaro, A.M.. "Rehabilitation of Kennedy Class I patients with implant-assisted removable partial dentures: a finite element study". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Lisboa, 2018.
  11. Neto, M. A.; Samarra, M.C.; Garruço, A.; Roseiro, L.M.; Amaro, A.M.. "Numerical assessment of knee arthrodesis using external fixation". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Lisboa, 2018.
  12. Amaro, Ana; Neto, M. A.; Reis, P.N.B.; Loureiro, A.J.R.. "Effect of friction stir spot welding on the mechanical strength of weld-bonded joints". Paper presented in XVI Portuguese Conference on Fracture, 2018.
  13. Amaro, Ana; Roseiro, L.M.; Paulino, M.F.; Alcobia, C.; Neto, M. A.. "Avaliação das Vibrações Induzidas ao Sistema Mão-Braço na Prática de Basquetebol – Estudo de caso numa Equipa Feminina Sub-16". Paper presented in 7º Congresso Nacional de Biomecânica, 2017.
  14. Paulino, M.F.; Almeida, D.R.; Roseiro, L.M.; Neto, M. A.; Amaro, Ana. "Influence of the fixator distance in the transfer load to the bone fracture- a simplified study". Paper presented in 7º Congresso Nacional de Biomecânica, 2017.
  15. Paulino, M.F.; Amaro, A. M.; Roseiro, L.M.; Neto, M. A.; Balacó, I.; Alves, C.. "Análise comparativa do efeito da utilização de uma ou duas placas de osteossíntese em fraturas da tíbia". Paper presented in 7º Congresso Nacional de Biomecânica,, 2017.
  16. Adão, J.; Samarra, M.C.; Garruço, A.; Roseiro, L.M.; Neto, M. A.; A. M. Amaro. "Avaliação numérica da artrodese do joelho utilizando um fixador externo". Paper presented in 7º Congresso Nacional de Biomecânica, 2017.
  17. Paulino, M.F.; Amaro, A.M.; Roseiro, L.M.; Neto, M. A.; Carvalhais, P.. "Influence of External Fixator Material in Micromovements of the Bone Callus". Paper presented in VI International Conference on Computational Bioengineering, 2015.
  18. Maranha, V.; Martins, , J. C.; Roseiro, L.M.; Amaro, A.M.; Neto, M. A.. "biomechanical properties of a new trochanteric plate of contention: TPC". Paper presented in 4th International Conference on Computational & Mathematical Biomedical Engineering, Paris, 2015.
  19. Amaro, A.M.; Reis, P.N.B.; Neto, M. A.; Cirne, J.S.. "Effect of Damages Promoted by Bending Loads on the Impact Strength". Paper presented in 6th International Conference on Mechanics and materials In Design, 2015.
  20. Maranha, V.; Martins, J.C.; Neto, M. A.; A. M. Amaro; Roseiro, L.M.. "Análise estrutural de placa trocantérica de contenção para fixação de fraturas da cabeça do fémur". Paper presented in 6º Congresso Nacional de Biomecânica, 2015.
  21. Paulino, M. F.; A. M. Amaro; Roseiro, L.M.; Neto, M. A.. "Análise numérica de componentes mecânicos associados a fixadores externos para estimulação do calo ósseo". Paper presented in 6º Congresso Nacional de Biomecânica, 2015.
  22. Ferreira, J.; Neto, M.A.; Nobre, J.P.; Amaro, A.M.; Roseiro, L.M.. "Multibody dynamic modelling and simulation of a three-wheeled electric car". Paper presented in IX International Conference on Structural Dynamics, 2014.
  23. Messias, A.; Rocha, S.; Calha, N.; Nicolau, P.; Guerra, F.; Neto, M.A.. "Effect of repeated tightening and loosening cycles of prosthetic screws in the micromovements of the abutment-implant assembly: A pilot study". 2014.
  24. Rodrigues, T.; Moreira, F.; Guerra, F.; Nicolau, P.; Neto, M.A.; Moreira, F.; Neto, M. A.. "Clinical trial-in vivo endosseous implants micromovements measuring with 3D Digital Image Correlation method". Paper presented in III International Conference on Biodental Engineering, 2014.
  25. Roseiro, L.M.; Maranha, V.; Alcobia, C.; Amaro, A. M.; Neto, M. A.. "Human Vibration Induced in the Hand-Arm System Using a Bush Trimmer". Paper presented in Congresso Nacional de Mecânica Experimental, 2014.
  26. Santos, P.M.; A. M. Amaro; Roseiro, L.M.; Neto, M. A.; Alcobia, C.. "Estudo das Vibrações Induzidas no Sistema Mão-Braço de Atletas de Basquetebol". Paper presented in Congresso Nacional de Mecânica Experimental, 2014.
  27. Calha, N.; Rodrigues, T.; Messias, A.; Roseiro, L.; Nicolau, P.; Neto, M.A.. "Effects of micromovement on the strain distribution of an implant supported zirconia dental bridge structure during loading: A 3D digital image correlation and 3D finite element analysis". 2014.
  28. Neto, M. A.; Ambrósio, J.A.C.; A.M.Amaro; Roseiro, L.M.. "Active Control of Structural Elements made of Composite Materials Exhibiting Large Rotations". Paper presented in IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, 2013.
  29. Samarra, M.C.; Roseiro, L.M.; Maranha, V.; Neto, M. A.; Alves, J.; Alcobia, C.. "Optimize the position of mechanical components of an external fixator using neural networks and genetic algorithms". Paper presented in International Conference on Algebraic and Symbolic Computation, Lisboa, 2013.
  30. Ambrósio, J.; Neto, M.A.. "Dynamics of structural components subjected to large rotations using a flexible multibody approach". 2013.
  31. Alcobia, C.; Roseiro, L.M.; Carvalhais, P.; Neto, M. A.. "Termografia infravermelha em artroplastias do joelho". Paper presented in 5º Congresso Nacional de Biomecânica, 2013.
  32. Messias, A.; Neto, M. A.; Nicolau, P.; Guerra, F.. "Estudo clínico e numérico das modificações de Classes I e II de Kennedy com recurso a implantes endósseos na região mandibular posterior". Paper presented in I Simpósio Inter-Universitário de Investigação em Medicina Dentária, 2013.
  33. Samarra, M.C.; Roseiro, L.M.; Neto, M. A.; Botelho, T. S.; Botelho, T.S.. "Use of Artificial Neural Networks for Identifying Forces on a Bulldozer Ripper". Paper presented in 3rd International Conference on Mathematical Models for Engineering Science, Paris, 2012.
  34. Rodrigues, A.T.; Moreira, F.; Neto, M. A.; Guerra, F.; Nicolau, P.. "In Vivo dental implant micromovements measuring with 3d digital image correlation method". Paper presented in II International Conference on Biodental Engineering, 2012.
  35. Neto, M. A.; Ambrósio, J.A.C.; Roseiro, L.M.; Amaro, A.M.; Vasques, C.M.A.. "Flexible Multibody Systems with Active Vibration Control". Paper presented in The Eighth International Conference on Engineering Computational Technology, Dubrovnik, 2012.
  36. Neto, M. A.; Nicolau, P.; Rocha, S.; Leal, R.P.. "Finite Element Comparison of Dental Implants: Static and Dynamic Analysis". Paper presented in The Eighth International Conference on Engineering Computational Technology, 2012.
  37. Amaro, A.M.; Reis, P.N.B.; Neto, M. A.. "Repeated impact characterization of glass/epoxy composite laminates". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino, 2012.
  38. Amaro, A.M.; Reis, P.N.B.; Neto, M. A.; de Moura, M.F.S.F.. "Repeated impact on glass Fiber/Epoxy laminates damaged". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino, 2012.
  39. Neto, M. A.; Ambrósio, J. A. C; Roseiro, L.M.; Amaro, A.M.. "Active vibration control of a flexible slider crank". Paper presented in the second Joint International Conference on Multibody System Dynamics, 2012.
  40. Neto, M.A.; Nicolau, P.; Rocha, S.; Leal, R.P.. "Finite element comparison of dental implants: Static and dynamic analysis". 2012.
  41. Neto, M.A.; Ambrósio, J.A.C.; Roseiro, L.M.; Amaro, A. M.; Vasques, C.M.A.. "Flexible multibody systems with active vibration control". 2012.
  42. Neto, M. A.; A. M. Amaro; Roseiro, L.M.; Cirne, J.S.; Leal, R.P.. "Numerical and Experimental Evaluation of Critical Bending Buckling of Composite Cantiliver Beams". Paper presented in XIII Portuguese Conference on Fracture, 2012.
    10.3850/978-981-08-6218-3_cc-th038
  43. A.M.Amaro; Reis, P.N.B.; Neto, M. A.. "The Effect of Holes on the Impact Strength of Glass Epoxy Composites". Paper presented in XIII Portuguese Conference on Fracture, 2012.
  44. Roseiro, L.M.; Neto, M. A.. "Optimizing the configuration of tibia fractures external fixators with Genetic Algorithms". Paper presented in International Symposium on Computational Intelligence for Engineering Systems ISCIES2011, Coimbra, 2011.
  45. Neto, M. A.; Rodrigues, T.; Nicolau, C.P.. "Micromovement measurements of endosseous dental implants with 3D Digital Image Correlation (DIC) method". Paper presented in ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, Olhão, 2011.
    Published
  46. Neto, M. A.; Nicolau, P.; Rocha, S.; Leal, R. P.. "Finite element comparison of dental implants with standard and platform switching prosthetic components". Paper presented in 2nd International Conference on Mathematical and Computational Biomedical Engineering – CMBE2011, Washington, 2011.
  47. Neto, M. A.; Tomaz, J.; Nicolau, P.. "Lod-bearing capacity of all-ceramic zirconia anterior bridge frameworks with different geometries". Paper presented in quarto Congresso Nacional de Biomecânica, 2011.
  48. Pedro, N.; Rocha, S.; Neto, M. A.; Guerra, F.; Leal, R. P.. "Dental implants with standard and platform switching prosthetic components: finite element comparision". Paper presented in 4º Congresso Nacional de Biomecânica, 2011.
  49. Roseiro, L.M.; Neto, M. A.. "optimização da configuração uniplanar-unilateral dos fixadores externos em fracturas da tíbia". Paper presented in 4º Congresso Nacional de Biomecânica, 2011.
  50. Rodrigues, T.; Moreira, F.; Neto, M. A.; Guerra, F.; Nicolau, P.. "Medição de Micromovimentos em implantes endósseos por correlação de imagem". Paper presented in XX Reunião Anual de Medicina Dentária e Estomatologia da Universidade de Coimbra, 2011.
  51. Neto, M. A.; Roseiro, L.M.; Leal, R.P.; Amaro, A. M.; Cirne, J.S.. "Numerical analysis and experimental validation of na elevator portic". Paper presented in Congresso de Métodos Numéricos em Engenharia, 2011.
  52. Neto, M. A.; Leal, R. P.; Yu, Wenbin. "A smart triangular finite element with drilling degrees of freedom". Paper presented in CST2010: The Tenth International Conference on Computational Structures Technology, Valencia, 2010.
  53. Neto, M. A.; Yu, W.; Leal, R.P.. "Desenvolvimento de materiais compósitos para estrutural uni e bidimensionais utilizando o método assintótico de homogeneização, Encontro Nacional de Materiais e Estruturas Compósitas". Paper presented in Encontro Nacional de Materiais e Estruturas Compósitas, 2010.
  54. Ambrósio, J. A. C; Neto, M. A.. "Critical overview on the choice of reference conditions and coordinate reduction methods in flexible Multibody dynamics". Paper presented in The First Joint International Conference on Multibody Systems Dynamics, 2010.
  55. Neto, M.A.; Leal, R.P.; Yu, W.. "A smart triangular finite element with drilling degrees of freedom". 2010.
  56. Neto, M. A.; Yu, Wenbin; Tang, T.; Leal, R. P.. "Sensitivity analysis of heterogeneous materials using the variational asymptotic method for unit cell homogenezitation". Paper presented in 7th EUROMECH Solid Mechanics Conference, 2009.
  57. Neto, M. A.; Yu, Wenbin; Ambrósio, J.A.C.; Leal, R. P.. "Optimization of a Wind Turbine by Flexible Multibody Modelling". Paper presented in ECCOMAS Thematic Conference Multibody Dynamics 2009, 2009.
  58. Neto, M. A.; Cardoso, N.; Morais, T.; Rilo, N. F.; Oliveira, M. C.; Loureiro, A.. "Numerical Analysis of Weld Configurations of Stiffened Panels under Compression". Paper presented in MARINE 2009 3th International Conference on Computing Methods in Marine Engineering, 2009.
  59. Neto, Maria; Yu, Wenbin; Ambrósio, Jorge. "Composite Rotor Blades Design of a Wind Turbine Using Flexible Multibody Modelling". 2008.
    10.2514/6.2008-2066
  60. Neto, M. A.; Yu, W.; Ambrósio, J. A. C. "Rotor blades design of a wind turbine". Paper presented in Conferência Nacional de Dinâmica de Sistemas Multicorpo, Guimarães, 2007.
  61. Neto, M. A.; Ambrósio, J. A. C; Leal, R. P.. "Optimization of a satellite with composite materials,". Paper presented in 6th European Solid Mechanics Conference, 2006.
  62. Neto, M.A.; Leal, R.P.; Ambrósio, J.. "Sensivity analysis of flexible multibody systems". 2006.
  63. Neto, M. A.; Leal, R. P.; Ambrósio, J.A.C.. "Optimization of Flexible Multibody Systems with Composite Materials: Sensitivity Analysis and Optimization Procedures". Paper presented in 6th European Conference on Structural Dynamics, Paris, 2005.
  64. Neto, M. A.; Ambrósio, J.A.C.; Leal, R. P.. "Optimization of Flexible Multibody Systems with Composite Materials: Application to the study of a Slider-crank mechanism". Paper presented in 6th European Conference on Structural Dynamics, Paris, 2005.
  65. Neto, M. A.; Ambrósio, J.A.C.; Leal, R.P.. "Optimization of Flexible Multibody Systems Using Composite Material Components". Paper presented in 5th EUROMECH nonlinear dynamics conference, Eindhoven, 2005.
  66. Neto, M. A.; Ambrósio, J.A.C.; Leal, R.P.. "Optimization of Flexible Multibody Systems Using Composite Materials Components". Paper presented in ECCOMAS Thematic Conference, International Conference on Advances in Computational Multibody Dynamics, Madrid, 2005.
  67. Neto, M.A.; Ambrósio, J.A.C.; Leal, R.P.. "Composite materials in flexible multibody systems". 2004.
  68. Neto, M. A.; Ambrósio, J.A.C.; Leal, R. P.. "Flexible Multibody Systems Models Using Composite Materials Components". Paper presented in ECCOMAS 2003, International Conference on Advances in Computational Multibody Dynamics, Lisboa, 2003.
  69. Neto, M. A.; Ambrósio, J.A.C.. "Stabilization Methods for the Integration of DAE in the Presence of Redundant Constraints". Paper presented in Virtual Nonlinear Multibody Systems, Praga, 2002.
  70. Neto, M. A.; Ambrósio, J.A.C.. "Stabilization Methods for the Integration of DAE in the Presence of Redundant Constraints". Paper presented in V Congresso de Métodos Numéricos em Engenharia, Madrid, 2002.
  71. Neto, M. A.; Rilo, N. F.; Roseiro, L.M.; Leal, R.P.. "Analysis of Laminated Composite Plates by First Order Shear Deformation Theory Finite Elements". Paper presented in Fourth World Congress on Computational mechanics, Buenos Aires, 1998.
    Published
Journal article
  1. Vidinha, H.; Branco, R.; Amaro, A.M.; Neto, M.A.; Reis, P.N.B.; Costa, J.D.M.. "Monotonic and fatigue behaviour of notched glass fibre-reinforced polymer laminates immersed in seawater". Theoretical and Applied Fracture Mechanics 126 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85162116375&partnerID=MN8TOARS.
    10.1016/j.tafmec.2023.103977
  2. Hugo Vidinha; Ricardo Branco; Maria Augusta Neto; Ana M. Amaro; Paulo Reis. "Numerical Modeling of Damage Caused by Seawater Exposure on Mechanical Strength in Fiber-Reinforced Polymer Composites". Polymers (2022): https://doi.org/10.3390/polym14193955.
    10.3390/polym14193955
  3. P.N.B. Reis; M.A. Neto; A.M. Amaro. "Multi-impact behaviour of composite laminates under constant and different energy levels". Composite Structures 294 (2022): 115788-115788. http://dx.doi.org/10.1016/j.compstruct.2022.115788.
    10.1016/j.compstruct.2022.115788
  4. Maria F. Paulino; Luis M. Roseiro; Inês Balacó; Maria A. Neto; Ana M. Amaro. "Evaluation of Bone Consolidation in External Fixation with an Electromechanical System". Applied Sciences (2022): https://doi.org/10.3390/app12052328.
    10.3390/app12052328
  5. Ricardo Branco; Paulo N. B. Reis; Maria A. Neto; José D. Costa; Ana M. Amaro. "Seawater Effect on Fatigue Behaviour of Notched Carbon/Epoxy Laminates". Applied Sciences (2021): https://doi.org/10.3390/app112411939.
    10.3390/app112411939
  6. Ana Messias; Inês J. Gomes; Paulo N. B. Reis; Ana M. Amaro; Maria A. Neto. "The Effectiveness of Dental Protection and the Material Arrangement in Custom-Made Mouthguards". Applied Sciences 11 20 (2021): 9363-9363. https://doi.org/10.3390/app11209363.
    10.3390/app11209363
  7. Maria A. Neto; Luis Roseiro; Ana Messias; Rui I. Falacho; Paulo J. Palma; Ana M. Amaro. "Influence of Cavity Geometry on the Fracture Strength of Dental Restorations: Finite Element Study". Applied Sciences 11 9 (2021): 4218-4218. https://doi.org/10.3390/app11094218.
    10.3390/app11094218
  8. Ana Messias; Maria A. Neto; Ana M. Amaro; Vítor M. Lopes; Pedro Nicolau. "Mechanical Evaluation of Implant-Assisted Removable Partial Dentures in Kennedy Class I Patients: Finite Element Design Considerations". Applied Sciences (2021): https://doi.org/10.3390/app11020659.
    10.3390/app11020659
  9. Moreira, M.; Ramos, J.C.; Messias, A.; Neto, M.A.; Amaro, A.; Reis, P.N.B.. "Impact response of different materials for sports mouthguards". Frattura ed Integrita Strutturale 15 57 (2021): 63-69. http://www.scopus.com/inward/record.url?eid=2-s2.0-85109214603&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.57.06
  10. Catarina M. Amaro; Maria A. Castro; Luis Roseiro; Maria A. Neto; Ana M. Amaro. "Plantar Pressure Evaluation during the Season in Five Basketball Movements". Applied Sciences 10 23 (2020): 8691-8691. https://doi.org/10.3390/app10238691.
    10.3390/app10238691
  11. M.F. Paulino; L.M. Roseiro; J.P. Dias; M.A. Neto; A.M. Amaro. "Differences among plantar pressure of acrobatic gymnasts when they jump over two competition floors. Does the presence of mattresses affect the gymnasts’ performance?". Science & Sports (2020): https://doi.org/10.1016/j.scispo.2020.05.006.
    10.1016/j.scispo.2020.05.006
  12. João Parente; Paulo N. B. Reis; M. Neto; A. M. Amaro. "Mechanical Properties of Sandwich Composites Reinforced by Nanoclays: An Overview". Applied Sciences 10 7 (2020): 2637-2637. https://doi.org/10.3390/app10072637.
    10.3390/app10072637
  13. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Santos, M.; Santos, J.B.. "Effect of the electric current on the stress relaxation behaviour of CFRP composites". Thin-Walled Structures 149 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079318150&partnerID=MN8TOARS.
    10.1016/j.tws.2020.106659
  14. Amaro, A.M.; Loureiro, A.J.R.; Neto, M.A.; Reis, P.N.B.. "Residual impact strength of glass/epoxy composite laminates after solid particle erosion". Composite Structures 238 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85078892581&partnerID=MN8TOARS.
    10.1016/j.compstruct.2020.112026
  15. Paulo Nobre Balbis dos Reis; Maria Augusta Neto. "Effect of Fibre Orientation and Hostile Solutions on Stress Relaxation of Glass/Polyamide Composites". Polymers 12 1 (2019): 20-20. https://doi.org/10.3390/polym12010020.
    Open access • Published • 10.3390/polym12010020
  16. Ana Martins Amaro; Maria Fátima Paulino; Luis Manuel Roseiro; Maria Augusta Neto. "The Effect of External Fixator Configurations on the Dynamic Compression Load: An Experimental and Numerical Study". Applied Sciences 10 1 (2019): 3-3. https://doi.org/10.3390/app10010003.
    10.3390/app10010003
  17. Ana M. Amaro; Maria F. Paulino; Maria A. Neto; Luis Roseiro. "Hand-Arm Vibration Assessment and Changes in the Thermal Map of the Skin in Tennis Athletes during the Service". International Journal of Environmental Research and Public Health (2019): https://doi.org/10.3390/ijerph16245117.
    10.3390/ijerph16245117
  18. Ana M. Amaro; Maria A. Neto; José S. Cirne; Paulo N.B. Reis. "Mechanical Characterization of Different Aluminium Foams at High Strain Rates". Materials 12 9 (2019): 1428-1428. https://doi.org/10.3390/ma12091428.
    10.3390/ma12091428
  19. Reis, P.N.B.; Amaro, A.M.; Neto, M.A.; Cirne, J.S.. "Effect of Hostile Solutions on Composites Laminates Subjected to Low and High Velocity Impact Loads". Fibers and Polymers 20 1 (2019): 158-164. http://www.scopus.com/inward/record.url?eid=2-s2.0-85061660691&partnerID=MN8TOARS.
    10.1007/s12221-019-8477-z
  20. Reis, P.N.B.; Neto, M.A.; Amaro, A.M.. "Effect of hostile solutions on stress relaxation of carbon/epoxy composites". Polymer Degradation and Stability 165 (2019): 60-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-85065099173&partnerID=MN8TOARS.
    10.1016/j.polymdegradstab.2019.04.026
  21. Amaro, A.M.; Neto, M.A.; Reis, P.N.B.. "Mechanical characterization of AlSi12 foams at high strain rates". Material Design and Processing Communications 1 3 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85065744332&partnerID=MN8TOARS.
    10.1002/mdp2.55
  22. Reis, P.N.B.; Neto, M.A.; Amaro, A.M.. "Effect of the extreme conditions on the tensile impact strength of GFRP composites". Composite Structures 188 (2018): 48-54. http://www.scopus.com/inward/record.url?eid=2-s2.0-85039998912&partnerID=MN8TOARS.
    10.1016/j.compstruct.2018.01.001
  23. Roseiro, L.M.; Paulino, M.F.; Neto, M.A.; Amaro, A.M.. "Analysis of hand-arm vibration syndrome in drummers". International Journal of Industrial Ergonomics 66 (2018): 110-118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042641023&partnerID=MN8TOARS.
    10.1016/j.ergon.2018.02.014
  24. Amaro, A.M.; Pinto, M.I.M.; Reis, P.N.B.; Neto, M.A.; Lopes, S.M.R.. "Structural integrity of glass/epoxy composites embedded in cement or geopolymer mortars". Composite Structures 206 (2018): 509-516. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052862833&partnerID=MN8TOARS.
    10.1016/j.compstruct.2018.08.060
  25. Amaro, A.M.; Neto, M.A.; Loureiro, A.; Reis, P.N.B.. "Taper's angle influence on the structural integrity of single-lap bonded joints". Theoretical and Applied Fracture Mechanics 96 (2018): 231-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047056655&partnerID=MN8TOARS.
    10.1016/j.tafmec.2018.05.006
  26. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Multi-impact response of composite laminates with open holes". Polymer Composites 39 7 (2018): 2490-2498. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016584653&partnerID=MN8TOARS.
    10.1002/pc.24235
  27. Vitor M.M. Lopes; Maria A. Neto; Ana M. Amaro; Luis M. Roseiro; M.F. Paulino. "FE and experimental study on how the cortex material properties of synthetic femurs affect strain levels". Medical Engineering & Physics 46 (2017): 96-109. https://doi.org/10.1016/j.medengphy.2017.06.001.
    10.1016/j.medengphy.2017.06.001
  28. Calha, N.; Messias, A.; Guerra, F.; Martinho, B.; Neto, M.A.; Nicolau, P.. "Effect of geometry on deformation of anterior implant-supported zirconia frameworks: An in vitro study using digital image correlation". Journal of Prosthodontic Research 61 2 (2017): 139-148. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994530391&partnerID=MN8TOARS.
    10.1016/j.jpor.2016.08.004
  29. Amaro, A.M.; Reis, P.N.B.; Santos, J.B.; Santos, M.J.; Neto, M.A.. "Effect of the electric current on the impact fatigue strength of CFRP composites". Composite Structures 182 (2017): 191-198. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029679505&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.09.032
  30. Messias, A.; Rocha, S.; Calha, N.; Neto, M.A.; Nicolau, P.; Guerra, F.. "Effect of intentional abutment disconnection on the micro-movements of the implant–abutment assembly: a 3D digital image correlation analysis". Clinical Oral Implants Research 28 1 (2017): 9-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946163687&partnerID=MN8TOARS.
    10.1111/clr.12607
  31. Messias, A.; Neto, M.A.; Amaro, A.M.; Nicolau, P.; Roseiro, L.M.. "Effect of round curvature of anterior implant-supported zirconia frameworks: finite element analysis and in vitro study using digital image correlation". Computer Methods in Biomechanics and Biomedical Engineering 20 11 (2017): 1236-1248. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021822552&partnerID=MN8TOARS.
    10.1080/10255842.2017.1348501
  32. Roseiro, L.M.; Neto, M.A.; Amaro, A.M.; Alcobia, C.J.; Paulino, M.F.. "Hand-arm and whole-body vibrations induced in cross motorcycle and bicycle drivers". International Journal of Industrial Ergonomics 56 (2016): 150-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994029459&partnerID=MN8TOARS.
    10.1016/j.ergon.2016.10.008
  33. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Cirne, J.M.. "Residual impact strength of carbon/epoxy laminates after flexural loadings". Composite Structures 146 (2016): 69-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960884491&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.03.006
  34. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.. "Experimental study of temperature effects on composite laminates subjected to multi-impacts". Composites Part B: Engineering 98 (2016): 23-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-84969160178&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.05.021
  35. Amaro, A.M.; Antunes, F.V.; Neto, M.A.; Reis, P.N.B.; Minea, A.A.. "Resonant techniques as non-destructive techniques (NDT) applied to composite materials: Case study on low velocity impacts detection". Environmental Engineering and Management Journal 14 5 (2015): 1045-1052. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944581982&partnerID=MN8TOARS.
  36. Roseiro, L.M.; Neto, M.A.; Amaro, A.; Leal, R.P.; Samarra, M.C.. "External fixator configurations in tibia fractures: 1D optimization and 3D analysis comparison". Computer Methods and Programs in Biomedicine 113 1 (2014): 360-370. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887823411&partnerID=MN8TOARS.
    10.1016/j.cmpb.2013.09.018
  37. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Buckling analysis of laminated composite plates submitted to compression after impact". Fibers and Polymers 15 3 (2014): 560-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899978398&partnerID=MN8TOARS.
    10.1007/s12221-014-0560-x
  38. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Louro, C.. "Effect of different commercial oils on mechanical properties of composite materials". Composite Structures 118 1 (2014): 1-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-84910632903&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.07.017
  39. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Influence of open holes on composites delamination induced by low velocity impact loads". Composite Structures 97 (2013): 239-244. http://dx.doi.org/10.1016/j.compstruct.2012.09.041.
    10.1016/j.compstruct.2012.09.041
  40. Santos, M.J.; Santos, J.B.; Amaro, A.M.; Neto, M.A.. "Low velocity impact damage evaluation in fiber glass composite plates using PZT sensors". Composites Part B: Engineering 55 (2013): 269-276. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880517165&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.06.036
  41. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Louro, C.. "Effect of different acid solutions on glass/epoxy composites". Journal of Reinforced Plastics and Composites 32 14 (2013): 1018-1029. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879770785&partnerID=MN8TOARS.
    Published • 10.1177/0731684413483886
  42. Amaro, A.M.; Reis, P.N.B.; De Moura, M.F.S.F.; Neto, M.A.. "Influence of multi-impacts on GFRP composites laminates". Composites Part B: Engineering 52 (2013): 93-99. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878537278&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.03.041
  43. Neto, M.A.; Ambrósio, J.A.C.; Roseiro, L.M.; Amaro, A.; Vasques, C.M.A.. "Active vibration control of spatial flexible multibody systems". Multibody System Dynamics 30 1 (2013): 13-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877587655&partnerID=MN8TOARS.
    10.1007/s11044-013-9341-3
  44. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Louro, C.. "Effects of alkaline and acid solutions on glass/epoxy composites". Polymer Degradation and Stability 98 4 (2013): 853-862. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875237324&partnerID=MN8TOARS.
    10.1016/j.polymdegradstab.2012.12.029
  45. Neto, M.A.; Leal, R.P.; Yu, W.. "A triangular finite element with drilling degrees of freedom for static and dynamic analysis of smart laminated structures". Computers and Structures 108-109 (2012): 61-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865755105&partnerID=MN8TOARS.
    10.1016/j.compstruc.2012.02.014
  46. Neto, M.A.; Yu, W.; Tang, T.; leal, R.. "Analysis and optimization of heterogeneous materials using the variational asymptotic method for unit cell homogenization". Composite Structures 92 12 (2010): 2946-2954. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954145329&partnerID=MN8TOARS.
    10.1016/j.compstruct.2010.05.006
  47. Neto, M.A.; Ambrósio, J.A.C.; Leal, R.P.. "Sensitivity analysis of flexible multibody systems using composite materials components". International Journal for Numerical Methods in Engineering 77 3 (2009): 386-413. http://www.scopus.com/inward/record.url?eid=2-s2.0-60949096377&partnerID=MN8TOARS.
    10.1002/nme.2417
  48. Augusta Neto, M.; Yu, W.; Roy, S.. "Two finite elements for general composite beams with piezoelectric actuators and sensors". Finite Elements in Analysis and Design 45 5 (2009): 295-304. http://www.scopus.com/inward/record.url?eid=2-s2.0-61849145785&partnerID=MN8TOARS.
    10.1016/j.finel.2008.10.010
  49. Neto, M.A.; Yu, W.; Ambrósio, J.A.C.; Leal, R.P.. "Design blades of a wind turbine using flexible multibody modelling". Renewable Energy and Power Quality Journal 1 7 (2009): 569-576. http://www.scopus.com/inward/record.url?eid=2-s2.0-85073366417&partnerID=MN8TOARS.
    Open access • 10.24084/repqj07.433
  50. Neto, M.A.; Yu, W.; Leal, R.P.. "Generalized Timoshenko modelling of composite beam structures: Sensitivity analysis and optimal design". Engineering Optimization 40 10 (2008): 891-906. http://www.scopus.com/inward/record.url?eid=2-s2.0-51849127959&partnerID=MN8TOARS.
    10.1080/03052150802086821
  51. Ambrósio, J.A.C.; Neto, M.A.; Leal, R.P.. "Optimization of a satellite with composite materials". Journal of Mechanics of Materials and Structures 2 8 (2007): 1397-1419. http://www.scopus.com/inward/record.url?eid=2-s2.0-70349732885&partnerID=MN8TOARS.
    10.2140/jomms.2007.2.1397
  52. Ambrósio, J.A.C.; Neto, M.A.; Leal, R.P.. "Optimization of a complex flexible multibody systems with composite materials". Multibody System Dynamics 18 2 (2007): 117-144. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548246036&partnerID=MN8TOARS.
    10.1007/s11044-007-9086-y
  53. Neto, M.A.; Ambrósio, J.A.C.; Leal, R.P.. "Composite materials in flexible multibody systems". Computer Methods in Applied Mechanics and Engineering 195 50-51 (2006): 6860-6873. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748066676&partnerID=MN8TOARS.
    10.1016/j.cma.2005.08.009
  54. Neto, M.A.; Ambr'Osio, J.A.C.; Leal, R.P.. "Flexible multibody systems models using composite materials components". Multibody System Dynamics 12 4 (2004): 385-405. http://www.scopus.com/inward/record.url?eid=2-s2.0-17444421572&partnerID=MN8TOARS.
    10.1007/s11044-004-0911-2
  55. Neto, M.A.; Ambrôsio, J.. "Stabilization methods for the integration of DAE in the presence of redundant constraints". Multibody System Dynamics 10 1 (2003): 81-105. http://www.scopus.com/inward/record.url?eid=2-s2.0-0041695338&partnerID=MN8TOARS.
    10.1023/A:1024567523268
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2021/09/06 Digital images correlation of two internal fixation implants during treatment of femur neck fractures 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 5th Conference on Imaging and Visualization
(Bonn, Germany)
2019 Numerical evaluation of the knee arthrodesis using a modified external fixator XV Mediterranean Conference on Medical and Biological Engineering and Computing,
(Coimbra)
2019 Finite element comparison of two implants for the treatment of unstable trochanteric femur fractures XV Mediterranean Conference on Medical and Biological Engineering and Computing
2018 Numerical Assessment of Knee Arthrodesis using External Fixation 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization
(Lisboa)
2018 Numerical Assessment of Knee Arthrodesis using External Fixation PCF2018, Universidade da Beira Interior
(Covilhã)
2018 Rehabilitation of Kennedy Class I Patients with Implant-Assisted Partial Dentures: A Finite Element Study PCF2018, Universidade da Beira Interior,
(Covilhã)
2015 Numerical and experimental analysis of a trochanteric plate of contention in standard and osteoporotic bone ICTE 2015, International conference on tissue engineering
(Lisboa)
2015 biomechanical properties of a new trochanteric plate of contention: TPC Computational & Mathematical biomedical engineering
(Cachan)
2015 Propriedades Biomecânicas da Placa Trocantérica de Contenção T.P.C VI Congresso da Sociedade Ortopédica de Língua Portuguesa
(Ilha do Sal, Cabo Verde)
2014 Multibody Dynamic Modelling and Simulation of a Three-wheeled Electric Car EURODYN 2014, IX International Conference on Structural Dynamics
(Porto)
2013 Active Vibration Control of a SAR Antenna Euromech Colloquium 541: New Advances in the Nonlinear Dynamics and Control of Composites for Smart Engineering Design
(Senigallia)
2012 Active vibration control of a flexible slider crank the second Joint International Conference on Multibody System Dynamics, IMSD2012
2011 Finite element comparison of dental implants with standard and platform switching prosthetic components 2nd International Conference on Mathematical and Computational Biomedical Engineering
(Washington D.C)
2011 Lod-bearing capacity of all-ceramic zirconia anterior bridge frameworks with different geometries 4º Congresso Nacional de Biomecânica
(Coimbra)
2011 Análise Numérica e Validação Experimental de uma Bancada de Elevador Congresso de Métodos Numéricos em Engenharia
2010 A smart triangular finite element with drilling degrees of freedom The Tenth International Conference on Computational Structures Technology
(Valencia)
2009 Blades Design of a Wind Turbine using Flexible Multibody Modelling International Conference on Renewable Energies and Power Quality
(Valencia)
2009 Optimization of a Wind Turbine by Flexible Multibody Modelling ECCOMAS Thematic Conference Multibody Dynamics 2009
(Warsaw)
2009 Sensitivity analysis of heterogeneous materials using the variational asymptotic method for unit cell homogenezitation 7th EUROMECH Solid Mechanics Conference
2008 Composite Rotor Blades Design of a Wind Turbine Using Flexible Multibody Modelling 49th AIAA/ASME/ASCE/AHS/ASC structures, structural Dynamics and Materials Conference
2007 Rotor blades design of a wind turbine Conferência Nacional de Dinâmica de Sistemas Multicorpo, DSM2007
2005 Optimization of Flexible Multibody Systems Using Composite Materials Components Intrnational Conference on Advances in Computational Multibody Dynamics
2005 Optimization of Flexible Multibody Systems with Composite Materials: Sensitivity Analysis and Optimization Nonlinear deformations in multibody dynamics: application to structural crashworthenes- EURODYN-2005
2005 Optimization of Flexible Multibody Systems with Composite Materials: Application to the study of a Slider-crank mechanism Nonlinear deformations in multibody dynamics: application to structural crashwortheness, EURODYN-2005
(Paris)
2002 Stabilization Methods for the Integration of DAE in the Presence of Redundant Constraints Virtual Nonlinear Multibody Systems
(Praga)

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2023 - 2023 Biomechanical evaluation of teeth subjected to apicoectomy with different levels of periodontal supports
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023 - 2023 Aplicações Industriais com Robôs Colaborativos
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 - 2022 AVALIAÇÃO ESTRUTURAL DO QUADRO E BRAÇO OSCILANTE DE UM MOTOCICLO ELÉTRICO
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 - 2022 NUMERICAL EVALUATION OF THE EFFECTS OF SEAWATER ON THE STRENGTH OF GLASS FIBER REINFORCED POLYMERS
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 - 2022 Implementação de simulação em elementos finitos em carroçaria de referência virtual
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 - 2022 Modelação e Simulação de um Salto Vertical em uma Plataforma de Forças
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022 - 2022 Avaliação Numérica da Resistência Mecânica de juntas Coladas de Materiais Dissimilares
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/02 - 2021/11 Análise do Estado de Deformação em Laminados Vidro/Epóxido Imersos em água Salgada Sujeitos a Cragas Cíclicas; Deformation analysis of immersed in a saltwater environment glass/epoxy laminates subject to cyclic loads,
Co-supervisor
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020/10 - 2021/10 Application od Additive Manufacturing Polymers in Frameworks of Full-Arch Implant-Supported Fixed protheses
Co-supervisor
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/02 - 2021/07 Desenvolvimento e impressão 3D de Estruturas poliméricas com coeficiente de Poisson unitário; Development and 3D Printing of polymeric structures with unity Poisson ratio
Co-supervisor
Master (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Desenvolvimento e Impressão 3D de Estruturas Poliméricas com Coeficiente de Poisson Unitário.
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 ANÁLISE DO ESTADO DE DEFORMAÇÃO EM LAMINADOS VIDRO/EPÓXIDO IMERSOS EM ÁGUA SALGADA SUJEITOS A CARGAS CÍCLICAS
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Application of additive manufactured polymers in frameworks of full-arch implant-supported fixed prostheses
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020/02/03 - 2020/11/04 Evaluation of Vehicle Comfort: Influence of the Type of Suspension and Type of Tread
Co-supervisor
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020/02/04 - 2020/09/14 Experimental Evaluation of Bone Fixation Systems for Long Bones
Co-supervisor
Mestrado integrado (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020 - 2020 Avaliação do conforto de um veículo automóvel: Influência do tipo de suspensão e do tipo de pavimento.
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020 - 2020 Avaliação Experimental de Sistemas de Fixação Óssea para Ossos Longos
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Modelo constitutivo para previsão do comportamento cíclico da liga 7050-T6
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2019 - 2019 Avaliação da influência da geometria da cavidade retentiva na resistência mecânica das obturações dentárias (restauração do dente)
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Modelo constitutivo para previsão do comportamento cíclico da liga 7050-T6
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Avaliação numérica da resistência ao impacto de diferentes protetores bucais para uso desportivo
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Avaliação do Comportamento Mecânico do Uso de Duas Placas de Osteossintese na Estabilização de Aloenxertos
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Avaliação numérica de sistemas de fixação óssea para ossos longos
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2019 Avaliação numérica da resistência ao impacto de diferentes protetores bucais para uso desportivo
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra, Portugal
2018 - 2019 Avaliação do comportamento mecânico do uso de duas placas de osteossíntese na estabilização de aloenxertos
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra, Portugal
2018 - 2019 Avaliação numérica de sistemas de fixação óssea para ossos longos
Co-supervisor
Engenharia Biomédica
Universidade de Coimbra, Portugal
2012 - 2019 Clinical study and finite element analysis of the use of dental implants in the posterior mandibular areas for support on distal-extention removable partial denture
Co-supervisor
Ciências da Saúde (PhD)
Universidade de Coimbra Faculdade de Medicina, Portugal
2018 - 2018 Efeito da orientação das fibras no comportamento viscoelástico de GFRP sujeitos a ambientes hostis
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2018 - 2018 Avaliação numérica da utilização de uma ou duas placas de osteossíntese na estabilização de ossos longos
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2018 - 2018 Desenvolvimento, simulação e otimização de um chassi automóvel tubular
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2018 - 2018 Avaliação da influência da geometria da cavidade retentiva na resistência mecânica das obturações dentárias
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2018 - 2018 Desenvolvimento, simulação e otimização de um chassi automóvel tubular.
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Efeito da orientação das fibras no comportamento viscoelástico de GFRP sujeitos a ambientes hostis
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Avaliação numérica do uso de uma ou duas placas de osteossíntese na estabilização de ossos longos
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Avaliação do comportamento biomecânico de uma placa trocantérica de contenção em fraturas da zona proximal do fémur
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2017 - 2017 Avaliação numérica da artrodese do joelho utilizando o fixador externo SimpleFix,
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2017 - 2017 Avaliação do comportamento biomecânico de uma placa trocantérica de contenção em fraturas da zona proximal do fémur
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017 - 2017 Avaliação numérica da artrodese do joelho utilizando o fixador externo SimpleFix
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2016 - 2016 Análise numérica da influência do Taper na resistência de juntas coladas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2016 - 2016 Avaliação numérica da artrodese do joelho utilizando fixadação externa
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2016 - 2016 Análise Estrutural de um Molde para Injeção de Componentes Plástico
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2016 - 2016 Caracterização Numérica de um fixador externo para faturas da tíbia
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2016 - 2016 Estudo e otimização da tampa de reforço de um cárter diferencial com engrenagem espiral cónica hipóide
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2016 - 2016 Análise numérica da influência do Taper na resistência de juntas coladas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Estudo do Comportamento mecânico de pontes dentárias
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2015 - 2015 Extended Biomechanical Model of the Ankle-foot Complex: incorporation of muscles and ligments,
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra, Portugal
2015 - 2015 Extended Biomechanical Model of the Ankle-Foot Complex: Incorporation of Muscles and Ligaments
Co-supervisor
Engenharia Biomédica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Avaliação do comportamento estrutural de um espigão de selim em material compósito
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Reabilitação de pacientes classe I de Kennedy com próteses parciais removíveis: estudo clínico retrospetivo e análise biomecânica de soluções assistidas por implantes
Co-supervisor
Ciências da Saúde (PhD)
Universidade de Coimbra Faculdade de Medicina, Portugal
2014 - 2014 Análise do Comportamento Dinâmico de um Veículo Automóvel de Rali
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2014 - 2014 Avaliação numérica do alongamento ósseo de uma mandíbula humana
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2014 - 2014 Análise e desenvolvimento de uma estrutura monocoque para um veículo de elevada eficiência energética
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2014 - 2014 Avaliação do comportamento estrutural de um espigão de selim em material compósito
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2014 - 2014 Análise do Comportamento Dinâmico de um Veículo Automóvel de Rali
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2014 Análise e desenvolvimento de uma estrutura monocoque para um veiculo de elevada eficiência energética
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2014 Avaliação numérica do alongamento ósseo de uma mandíbula humana
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2013 - 2013 Modelação numérica pelo método dos elementos finitos de uma telha cerâmica
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2013 - 2013 Projeto e análise computacional da suspensão de um veículo de três rodas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2012 - 2012 Desenvolvimento e concepção de um sistema de medida para avaliação do equilíbrio humano
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2012 - 2012 Modelação numérica do índice de Tinetti e de Berg
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2011 - 2011 Avaliação pelo método dos elementos finitos das cargas críticas de Bending-Buckling
Co-supervisor
Engenharia Mecânica
Universidade de Coimbra, Portugal
2011 - 2011 Análise numérica do comportamento da estrutura de um eco veículo
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2011 - 2011 Avaliação experimental de uma bancada de um elevador sem casa de máquinas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2011 - 2011 Modelação e avaliação numérica de uma bancada de um elevador sem casa de máquinas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2010 - 2010 Obtenção de materiais com propriedades térmicas extremas
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Coimbra, Portugal
2010 - 2010 Análise do comportamento dinâmico de um veículo utilitário citadino
Co-supervisor
Engenharia Automóvel (Master)
Universidade de Coimbra, Portugal

Event organisation

Event name
Type of event (Role)
Institution / Organization
2010 - 2011 CNB2011, 4º Congresso Nacional de Biomecânica (2010 - 2011)
Congress (Co-organisor)

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2021/12 Conceção e validação de equipamento experimental para avaliar a resistência ao impacto de protetores bucais para o uso desportivo; Conception and validation of experimental equipment to evaluate the impact resistance of mouthguards for sports use
President of the jury
Hugo Oliveira macedo Teixeira (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/11 Comparação Experimental de Dispositivos para Avaliação da Pressão Plantar; Experimental Comparison of Plantar Pressure Devices.
President of the jury
Ana Filipa dos Santos Pastilha (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/11 Efeito do tempo de imersão em ambiente salino na resposta à fadiga de laminados vidro/epóxido; Effect of immersion time in a saline environment in response to the fatigue of glass/epoxide laminates.
President of the jury
David Manuel de Campos Aguiar (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/10 Estudo da Dinâmica de Receções em Pares/Grupos de Ginástica Acrobática; Study of the dynamics of Receptions in Pairs/Groups of Acrobatic Gymnastics,
President of the jury
Maria Beatriz Cavaca Santos (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/10 Application od Additive Manufacturing Polymers in Frameworks of Full-Arch Implant-Supported Fixed protheses
Supervisor
Rafaela Lourenço Graça Antunes (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/07 Desenvolvimento e impressão 3D de Estruturas poliméricas com coeficiente de Poisson unitário; Development and 3D Printing of polymeric structures with unity Poisson ratio
Supervisor
61. Joana Almeida Silva (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 Avaliação de técnicas de intervenção percutânea em modelos de impressão 3D; Evaluation of percutaneous intervention techniques in 3D-printed models.
President of the jury
Beatriz Maria das Neves Barros Lourenço Graça Antunes (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Committee member

Activity description
Role
Institution / Organization
2019 - 2019 Comissão Científica do 8º Congresso Nacional de Biomecânica
Member
2017 - 2017 Comissão Científica do 7º Congresso Nacional de Biomecânica
Member
2017 - 2017 Comissão Científica da 5th Portuguese Meeting on Bioengineering
Member
2015 - 2015 Comissão Científica do 6º Congresso Nacional de Biomecânica
Member

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2021 - 2022 Mechanic of Structures (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2019 Resitência de Materiais II Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2014 - 2019 Cálculo Automático de Estruturas Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2013 - 2019 Mecânica dos Sólidos Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2016 - 2017 Resistência de Materiais II Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2015 - 2016 Resistência Materiais I Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2013 - 2014 Resitência de Materiais II Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2008 - 2013 Dinâmica Comportamento e Simulação de Veículos Engenharia Automóvel (Mestrado) Universidade de Coimbra, Portugal
2010 - 2012 Cálculo Automático de Estruturas Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2009 - 2012 Mecânica Estrutural Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2005 - 2012 Mecânica dos Sólidos Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2007 - 2010 Introdução ao Projeto Mecânico Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2005 - 2007 Mecânica Estrutural Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
1998 - 2002 Mecânica Sólidos I Engenharia Mecânica (Licenciatura) Universidade de Coimbra, Portugal
1998 - 2002 Mecânica dos Sólidos II Engenharia Mecânica (Licenciatura) Universidade de Coimbra, Portugal
1996 - 1998 Mecânica dos Sólidos Engenharia Mecânica (Licenciatura) Universidade de Coimbra, Portugal
1995 - 1996 Resitência dos MAteriais Engenharia Mecânica (Licenciatura) Universidade de Coimbra, Portugal

Journal scientific committee

Journal title (ISSN) Publisher
2019 - Current Journal of Prosthodontics (1532-849X) Wiley (Blackwell Publishing)
2018 - Current Part H: Journal of Engineering in Medicine SAGE Journals
2017 - Current International Journal of Aerospace Engineering (1687-5974) Hindawi Limited
2016 - Current Advances in Engineering Software (0965-9978) Elsevier
2016 - Current International Journal of Environmental Research and Public Health (1660-4601) MDPI AG
2014 - Current International Journals for Numerical Methods in Engineering (1097-0207) John Wiley
2013 - Current Journal of Mechanical Science and Technology (1976-3824) Springer-Verlag
2013 - Current Engineering Computations (0264-4401) Emerald (MCB UP )
2013 - Current Medical Engineering & Physics (1350-4533) Elsevier
2011 - Current International Journals of Solids and Structures (0020-7683) Elsevier
2011 - Current International Journal for Numerical Methods in Biomedical Engineering (2040-7947) Wiley (John Wiley & Sons)
2009 - Current Composite Structures (0263-8223) Elsevier
2009 - Current Finite Elements in Analysis and Design (0168-874X) Elsevier
2009 - Current Composites Part B: Engineering (1359-8368) Elsevier
2009 - Current Applied Mechanics Reviews (2379-0407) ASME International
2008 - Current Computer Methods in Applied Mechanics and Engineering (0045-7825) Elsevier
2008 - Current Nonlinear Dynamics (0924-090X) Springer
2008 - Current Smart Materials and Structures (1361-665X) IOP Publishing
2006 - Current Journal Multibody Systems Dynamics (1384-5640) Springer
Distinctions

Award

2013 Winner of the regional competition Poliempreende
2013 Second on the National competition Poliempreende
2007 Best PhD. Portuguese Thesis in Applied and Computational Mechanics in 2006