???global.info.a_carregar???
Identification

Personal identification

Full name
Fernando Ventura Antunes
Date of birth
1967/03/14
Gender
Male

Citation names

  • Antunes, Fernando
  • FV Antunes

Author identifiers

Ciência ID
5213-7E6E-95EC
ORCID iD
0000-0002-0336-4729
Education
Degree Classification
2021/07/23
Concluded
 Engenharia Mecânica (Título de Agregado)
Major in Integridade estrutural
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
 Aprovado
1999/11
Concluded
 Engenharia Mecânica (Doutoramento)
Major in Especialidade: Construção Mecânica
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Propagação de Fendas por Fadiga a Alta Temperatura em Inconel 718" (THESIS/DISSERTATION)
 Muito Bom, com distinção e louvor
1990/11/01 - 1993/11/25
Concluded
 Ciências da Engenharia (Mestrado)
Major in Não Aplicável
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Utilização do Método dos Elementos Finitos na Determinação de Factores de Intensidade de Tensão" (THESIS/DISSERTATION)
 Muito Bom
1985/10/01 - 1990/11/01
Concluded
 Engenharia Mecânica (Licenciatura)
Major in Não Aplicável
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
 17 valores
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2020/12/17 - Current Associate Professor (University Teacher) Universidade de Coimbra, Portugal
1999/11/02 - 2025 Assistant Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1993/11/25 - 1999/11/01 Assistant (University Teacher) Universidade de Coimbra, Portugal
1990/11/30 - 1993/11/25 Trainee Assistant (University Teacher) Universidade de Coimbra, Portugal

Positions / Appointments

Category
Host institution 		Employer
2016/01/01 - 2020/09/01 Coordenador de mobilidade do departamento de engenharia mecânica Universidade de Coimbra, Portugal
2014/01/01 - 2015/12/31 Coordenador de doutoramentos Universidade de Coimbra, Portugal
2000/07/01 - 2004/09/01 Comissão de equivalências do departamento de engenharia mecânica Universidade de Coimbra, Portugal
Projects

Contract

Designation Funders
2018/07/01 - Current Crack-Free - Para materiais metálicos autorreparáveis
POCI-01-0145-FEDER-029101
Researcher
2018/06/01 - Current Improvements on the fatigue behavior of additive manufacturing titanium alloy components
SAICT / 2017, PROJECT NO. 028789
Researcher
2010/03/01 - Current EMEPNANOC - ENHACEMENT OF MECHANICAL PROPERTIES ON SPECIAL MODIFIED NANOCLAYED COMPOSITES
info:eu-repo/grantAgreement/FCT/5876-PPCDTI/103622/PT
 Universidade do Algarve Faculdade de Ciências e Tecnologia
Concluded
2007/05/01 - Current Linking the macro and micro phenomenological scales of the mechanical behaviour of syntactic foams
info:eu-repo/grantAgreement/FCT/3599-PPCDT/66549/PT
 Universidade do Algarve Faculdade de Ciências e Tecnologia
Concluded
2000/09/01 - Current FATIGUE BEHAVIOUR OF LIGHT STRUCTURES COMPONENTS SUBJECTED TO COMPLEX LOADING
info:eu-repo/grantAgreement/FCT/POCI/32984/PT
Researcher
Universidade do Algarve Faculdade de Ciências e Tecnologia
Concluded
2016/12/30 - 2019/12/29 Evaluation tridimensional del effecto de la plasticidad en el crecimiento de grieta mediante tecnicas numericas y experimentales
MAT2016-76951-C2-2-P
Researcher
Concluded
2016/06/01 - 2019/06/30 Melhoria do comportamento mecânico de componentes funcionais híbridos obtidos por sinterização a laser
PTDC/EMS-PRO/1356/2014
Researcher
2013/07/01 - 2015/10/31 Safe Crack - Damage Tolerance Analysis in Lightweight Aeronautical alloys
PTDC/EMS-PRO/3148/2012
Researcher
2011/01/01 - 2014/12/31 Melhoramento das propriedades mecânicas de compósitos híbridos nano-reforçados
PTDC/EME-PME/113695/2009
Researcher
2011/04/01 - 2014/03/31 CPM3D - 3D Crack propagation modelling
PTDC/EME-PME/114892/2009
Principal investigator
2005/04/01 - 2007/12/31 A soldadura por deposição laser - uma ferramenta de reparação de moldes
POCTI/EME/55918/2004
Concluded
2003/01/01 - 2004/12/31 Improvement of Fracture toughness tests
POCTI/EME/47022/2002
Principal investigator
Universidade de Coimbra, Portugal
Concluded
Outputs

Publications

Book
  1. Santos, L.M.S.; Capela, C.; Antunes, F.V.; Ferreira, J.A.M.; Costa, J.D.; Branco, R.. A Novel Specimen Geometry for Fatigue Crack Growth in Vacuum. 2020.
    10.1007/978-3-030-29041-2_27
  2. Camas, D.; Loureiro, P.; Prates, P.; Antunes, F.. Numerical determination of fatigue threshold from CTOD. 2017.
    10.4028/www.scientific.net/SSP.258.290
Book chapter
  1. Branco, R.; Costa, J. D.; Berto, F.; Kotousov, A.; Antunes, F. V.. "Prediction of Fatigue Crack Initiation Life in Notched Cylindrical Bars Under Multiaxial Cycling Loading". In Mechanical Fatigue of Metals, 271-277. Springer International Publishing, 2019.
    10.1007/978-3-030-13980-3_35
  2. Camas, D.; Garcia-Manrique, J.; Antunes, F.V.; Gonzalez-Herrera, A.. "Numerical analysis of the influence of crack growth scheme on plasticity induced crack closure results". 155-160. 2019.
    10.1007/978-3-030-13980-3_20
  3. Branco, R.; Costa, J.D.; Antunes, F.V.. "Multiaxial fatigue life prediction for lateral notched round bars made of 34CRNIMO6 high strength steel". 273-292. 2012.
  4. Branco, R.; Antunes, F.V.; Ferreira, J.A.M.; Silva, J.M.. "Effect of residual stresses on crack shape of corner cracks at holes in nickel base superalloys". 1-24. 2011.
  5. Gaspar, M. C.; Ventura, F.; Pereira, C.; Santos, C. M.. "Continuous Fitness at Home: Designing Exercise Equipment for the Daily Routine". In IFIP International Federation for Information Processing, 147-160. Springer US, 2006.
    Published • 10.1007/978-0-387-36792-7_9
  6. Pereira, C.; Malça, J.; Gaspar, M. C.; Ventura, F.. "Human Motion Analysis in Treadle Pump Devices". In IFIP International Federation for Information Processing, 135-145. Springer US, 2006.
    Published • 10.1007/978-0-387-36792-7_8
Conference paper
  1. Borges, M.F.; Antunes, F.V.; Prates, P.; Branco, R.; Vasco-Olmo, J.M.; Díaz, F.A.. "Model for fatigue crack growth analysis". 2020.
    10.1016/j.prostr.2020.04.030
  2. Marques, B.; Borrego, L.P.; Ferreira, J.M.; Antunes, F.V.; Branco, R.. "A numerical analysis of fatigue crack closure using CTOD". 2019.
    10.1016/j.prostr.2019.08.211
  3. Borrego, L.F.P.; Antunes, F.V.; Ferreira, J.A.M.; Costa, J.D.; Capela, C.. "Analysis of fatigue crack propagation in laser sintering metal". 2017.
    10.1016/j.prostr.2017.07.123
  4. Branco, R.; Costa, J.D.; Antunes, F.V.. "Influence of loading pattern in fatigue life for notched round bars subjected to bending-torsion". 2014.
    10.1051/matecconf/20141208004
  5. Borrego, L.P.; Antunes, F.V.; Costa, J.D.; Ferreira, J.M.. "A numerical study of plasticity induced crack closure under overloads and Hi-Lo blocks". 2010.
    Published
  6. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.; Capela, C.. "Analysis of the initial delamination size on the mode i interlaminar fracture of carbon/epoxy composites". Paper presented in ICCM International Conferences on Composite Materials, 2009.
    Published
  7. Branco, R.; Antunes, F.. "Educational software developed by students in classroom environment". 2008.
  8. Pereira, A.M.; Bártolo, P.J.; Ferreira, J.M.; Antunes, F.. "Laminated Object Manufacturing with aluminium bonded sheets". Paper presented in 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping, 2007.
    Published
  9. Bolrão, J.; Capela, C.; Antunes, F.; Camaño, P.. "Study of a composite material with metallic particles for application in an automobile component". Paper presented in 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping, Leiria, 2007.
  10. Branco, R.; Antunes, F.. "Educational engineering software for Statics". 2007.
  11. Pereira, C.; Antunes, F.V.; Gaspar, M.C.; Mateus, A.; Foruria De Diego, A.; Carrascal Morillo, M.T.. "Numerical modelling of the mechanical behaviour of a PHILOS plate and a PHN nail in the treatment of a proximal humeral fracture". Paper presented in 5th International Conference on Engineering Computational Technology, 2006.
  12. Gaspar, M.C.; Mateus, A.; Pereira, C.; Antunes, F.V.. "Biomechanical modeling of hip joint prosthesis". Paper presented in World Tribology Congress III - 2005, Washington, 2005.
    Published • 10.1115/wtc2005-64276
Journal article
  1. E.R. Sérgio; F.V. Antunes; D. Kujawski; D.M. Neto. "Fatigue crack growth: Validation of the Kmax-¿K approach using the GTN damage model". International Journal of Fatigue (2023): https://doi.org/10.1016/j.ijfatigue.2023.107888.
    10.1016/j.ijfatigue.2023.107888
  2. G.L. Gómez Gonzáles; F.V. Antunes; E.R. Sérgio; J.M. Vasco-Olmo; F.A. Díaz; D.M. Neto. "A comparison between FEM predictions and DIC results of crack tip displacement field in CT specimens made of titanium". Theoretical and Applied Fracture Mechanics (2023): https://doi.org/10.1016/j.tafmec.2023.104055.
    10.1016/j.tafmec.2023.104055
  3. D.M. Neto; N. Cavaleiro; E.R. Sérgio; J. Jesus; A. Camacho-Reyes; F.V. Antunes. "Effect of crack flank holes on fatigue crack growth". International Journal of Fatigue (2023): https://doi.org/10.1016/j.ijfatigue.2023.107505.
    10.1016/j.ijfatigue.2023.107505
  4. Edmundo R. Sérgio; Fernando V. Antunes; Diogo M. Neto. "Fatigue crack growth modeling considering a hybrid propagation strategy". Fatigue & Fracture of Engineering Materials & Structures (2023): https://doi.org/10.1111/ffe.13950.
    10.1111/ffe.13950
  5. D. M. Neto; J. Pedro; M. F. Borges; L. F. P. Borrego; E. R. Sérgio; F. V. Antunes. "Numerical prediction of fatigue crack growth based on cumulative plastic strain versus experimental results for AA6082-T6". International Journal of Fracture (2023): https://doi.org/10.1007/s10704-022-00680-w.
    10.1007/s10704-022-00680-w
  6. Diogo M. Neto; Edmundo R. Sérgio; Francisco Jesus; James C. Newman, Jr.; Fernando V. Antunes. "Fatigue Crack Propagation under Christmas Tree Load Pattern". Applied Sciences (2023): https://doi.org/10.3390/app13031284.
    10.3390/app13031284
  7. Fernando Ventura Antunes. "Fatigue Crack Growth in Metallic Materials". Materials (2022): https://doi.org/10.3390/ma16010011.
    10.3390/ma16010011
  8. Diogo M. Neto; Micael F. Borges; Edmundo R. Sérgio; Fernando V. Antunes. "Effect of Residual Stresses on Fatigue Crack Growth: A Numerical Study Based on Cumulative Plastic Strain at the Crack Tip". Materials 15 6 (2022): 2156-2156. https://doi.org/10.3390/ma15062156.
    10.3390/ma15062156
  9. Jose M. Vasco-Olmo; Francisco A. Díaz; Alonso Camacho-Reyes; Neil James; Fernando V. Antunes. "Experimental evaluation of plastic wake on growing fatigue cracks from the analysis of residual displacement fields". Fatigue & Fracture of Engineering Materials & Structures (2022): https://doi.org/10.1111/ffe.13681.
    10.1111/ffe.13681
  10. Patricio G. Riofrío; Fernando Antunes; José Ferreira; António Castanhola Batista; Carlos Capela. "Fatigue Performance of Thin Laser Butt Welds in HSLA Steel". Metals (2021): https://doi.org/10.3390/met11101499.
    10.3390/met11101499
  11. Edmundo R. Sérgio; Fernando V. Antunes; Micael F. Borges; Diogo M. Neto. "FCG Modelling Considering the Combined Effects of Cyclic Plastic Deformation and Growth of Micro-Voids". Materials 14 15 (2021): 4303-4303. https://doi.org/10.3390/ma14154303.
    10.3390/ma14154303
  12. Edmundo R. Sérgio; Fernando V. Antunes; Diogo M. Neto; Micael F. Borges. "Study on the Influence of the Gurson–Tvergaard–Needleman Damage Model on the Fatigue Crack Growth Rate". Metals 11 8 (2021): 1183-1183. https://doi.org/10.3390/met11081183.
    10.3390/met11081183
  13. Joel de Jesus; Micael Borges; Fernando Antunes; José Ferreira; Luis Reis; Carlos Capela. "A Novel Specimen Produced by Additive Manufacturing for Pure Plane Strain Fatigue Crack Growth Studies". Metals 11 3 (2021): 433-433. https://doi.org/10.3390/met11030433.
    10.3390/met11030433
  14. Bruno Marques; Diogo Neto; Fernando Antunes; Jose Vasco-Olmo; Francisco Díaz. "Numerical tool for the analysis of CTOD curves obtained by DIC or FEM". Fatigue & Fracture of Engineering Materials & Structures (2020): https://doi.org/10.1111/ffe.13350.
    10.1111/ffe.13350
  15. Camas, D.; Garcia-Manrique, J.; Antunes, F.V.; Gonzalez-Herrera, A.. "Three-dimensional fatigue crack closure numerical modelling: Crack growth scheme". Theoretical and Applied Fracture Mechanics 108 (2020): 102623. http://dx.doi.org/10.1016/j.tafmec.2020.102623.
    10.1016/j.tafmec.2020.102623
  16. Borges, M.F.; Neto, D.M.; Antunes, F.V.. "Numerical simulation of fatigue crack growth based on accumulated plastic strain". Theoretical and Applied Fracture Mechanics 108 (2020): 102676. http://dx.doi.org/10.1016/j.tafmec.2020.102676.
    10.1016/j.tafmec.2020.102676
  17. Branco, R.; Costa, J.D.; Borrego, L.P.; Wu, S.C.; Long, X.Y.; Antunes, F.V.. "Effect of tensile pre-strain on low-cycle fatigue behaviour of 7050-T6 aluminium alloy". Engineering Failure Analysis 114 (2020): 104592. http://dx.doi.org/10.1016/j.engfailanal.2020.104592.
    10.1016/j.engfailanal.2020.104592
  18. Borges, Micael; Caldas, Manuel; Antunes, Fernando; Branco, Ricardo; Prates, Pedro. "Fatigue Crack Growth from Notches: A Numerical Analysis". Applied Sciences 10 12 (2020): 4174. http://dx.doi.org/10.3390/app10124174.
    10.3390/app10124174
  19. Borges, M.F.; Antunes, F.V.; Prates, P.A.; Branco, R.; Cruces, A.S.; Lopez-Crespo, P.. "Effect of kinematic hardening parameters on fatigue crack growth". Theoretical and Applied Fracture Mechanics 106 (2020): 102501. http://dx.doi.org/10.1016/j.tafmec.2020.102501.
    Published • 10.1016/j.tafmec.2020.102501
  20. André Prates, Pedro; Eusébio Marques, Armando; Frias Borges, Micael; Madeira Branco, Ricardo; Antunes, Fernando Ventura. "Numerical Study on the Variability of Plastic CTOD". Materials 13 6 (2020): 1276. http://dx.doi.org/10.3390/ma13061276.
    Open access • Published • 10.3390/ma13061276
  21. José Manuel Vasco-Olmo; Francisco Alberto Díaz Garrido; Fernando Ventura Antunes; M.N. James; Vasco-Olmo, José Manuel; Díaz Garrido, Francisco Alberto; Antunes, Fernando Ventura; James, M.N.. "Plastic CTOD as fatigue crack growth characterising parameter in 2024-T3 and 7050-T6 aluminium alloys using DIC". Fatigue & Fracture of Engineering Materials & Structures (2020): https://doi.org/10.1111/ffe.13210.
    Published • 10.1111/ffe.13210
  22. Borges, M. F.; Antunes, F. V.; Prates, P. A.; Branco, R.. "A Numerical Study of the Effect of Isotropic Hardening Parameters on Mode I Fatigue Crack Growth". Metals 10 2 (2020): 177. http://dx.doi.org/10.3390/met10020177.
    Open access • Published • 10.3390/met10020177
  23. Sandra Perdigão; Jorge Cunha; Filipe Nogueira; Ricardo Branco; Fernando Ventura Antunes. "3D-FE automatic procedure to evaluate the fatigue life extension by overloading". Material Design & Processing Communications (2020): https://doi.org/10.1002/mdp2.110.
    Published • 10.1002/mdp2.110
  24. Ferreira, F.F.; Neto, D.M.; Jesus, J.S.; Prates, P.A.; Antunes, F.V.. "Numerical prediction of the fatigue crack growth rate in SLM Ti-6Al-4V based on crack tip plastic strain". Metals 10 9 (2020): 1-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-85089846104&partnerID=MN8TOARS.
    10.3390/met10091133
  25. Borges, M.; Caldas, M.; Antunes, F.; Branco, R.; Prates, P.. "Fatigue crack growth from notches: A numerical analysis". Applied Sciences (Switzerland) 10 12 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85087768535&partnerID=MN8TOARS.
    10.3390/APP10124174
  26. M.F. Borges; F.V. Antunes; P.A. Prates; R. Branco; T. Vojtek. "Effect of Young’s modulus on Fatigue Crack Growth". International Journal of Fatigue (2019): https://doi.org/10.1016/j.ijfatigue.2019.105375.
    Accepted • 10.1016/j.ijfatigue.2019.105375
  27. Oliveira, P.I.; Antunes, F.V.; Loureiro, A.; Costa, J.M.. "Effect of the angular misalignment of laser welded T-joints on fatigue curves". International Journal of Fatigue 128 (2019): 105180. http://dx.doi.org/10.1016/j.ijfatigue.2019.06.040.
    Published • 10.1016/j.ijfatigue.2019.06.040
  28. Antunes, Fernando; Santos, Luís; Capela, Carlos; Ferreira, José; Costa, José; Jesus, Joel; Prates, Pedro. "Fatigue Crack Growth in Maraging Steel Obtained by Selective Laser Melting". Applied Sciences 9 20 (2019): 4412. http://dx.doi.org/10.3390/app9204412.
    Open access • Published • 10.3390/app9204412
  29. Ricardo Branco; Fernando Antunes; José Costa; Andrei Kotousov. "On the stress state transition in notched cracked plates under tension loading". Material Design & Processing Communications e85 (2019): 1-6. https://doi.org/10.1002/mdp2.85.
    Published • 10.1002/mdp2.85
  30. R. Branco; J.D. Costa; F. Berto; A. Kotousov; F.V. Antunes. "Fatigue crack initiation behaviour of notched 34CrNiMo6 steel bars under proportional bending-torsion loading". International Journal of Fatigue 130 (2019): https://doi.org/10.1016/j.ijfatigue.2019.105268.
    Published • 10.1016/j.ijfatigue.2019.105268
  31. Antunes, F.V.; Prates, P.A.; Camas, D.; Sarrazin-Baudoux, C.; Gardin, C.. "Numerical prediction of fatigue threshold of metallic materials in vacuum". Engineering Fracture Mechanics 216 (2019): 106491. http://dx.doi.org/10.1016/j.engfracmech.2019.106491.
    Published • 10.1016/j.engfracmech.2019.106491
  32. Branco, R.; Prates, P.A.; Costa, J.D.; Borrego, L.P.; Berto, F.; Kotousov, A.; Antunes, F.V.. "Rapid assessment of multiaxial fatigue lifetime in notched components using an averaged strain energy density approach". International Journal of Fatigue 124 (2019): 89-98. http://dx.doi.org/10.1016/j.ijfatigue.2019.02.005.
    Published • 10.1016/j.ijfatigue.2019.02.005
  33. Ricardo Branco; Pedro Prates; Filippo Berto; José Costa; Fernando Antunes. "Mixed numerical-experimental method for generation of energy-life fatigue master curves". Material Design & Processing Communications 1 (2019): e37-e37. https://doi.org/10.1002/mdp2.37.
    Published • 10.1002/mdp2.37
  34. J.M. Vasco-Olmo; F.A. Díaz; F.V. Antunes; M.N. James. "Characterisation of fatigue crack growth using digital image correlation measurements of plastic CTOD". Theoretical and Applied Fracture Mechanics 101 (2019): 332-341. https://doi.org/10.1016/j.tafmec.2019.03.009.
    Published • 10.1016/j.tafmec.2019.03.009
  35. Antunes, F.V.; Ferreira, M.S.C.; Branco, R.; Prates, P.; Gardin, C.; Sarrazin-Baudoux, C.. "Fatigue crack growth versus plastic CTOD in the 304L stainless steel". Engineering Fracture Mechanics 214 (2019): 487-503. http://dx.doi.org/10.1016/j.engfracmech.2019.04.013.
    Published • 10.1016/j.engfracmech.2019.04.013
  36. Fernando Antunes; Pedro Prates; Daniel Camas; Jose Costa. "Elastic correction of fatigue crack growth laws". Fatigue & Fracture of Engineering Materials & Structures 42 5 (2019): 1052-1061. https://doi.org/10.1111/ffe.12968.
    Published • 10.1111/ffe.12968
  37. Antunes, F. V.; Paiva, L.; Branco, R.; Borrego, L. P.. "Effect of Underloads on Plasticity-Induced Crack Closure: A Numerical Analysis". Journal of Engineering Materials and Technology 141 3 (2019): http://dx.doi.org/10.1115/1.4042865.
    Published • 10.1115/1.4042865
  38. Antunes, Fernando; Branco, Ricardo; Ferreira, José; Borrego, Luís. "Stress Intensity Factor Solutions for CTS Mixed Mode Specimen". Frattura ed Integrità Strutturale 13 48 (2019): 676-692. http://dx.doi.org/10.3221/igf-esis.48.64.
    Published • 10.3221/igf-esis.48.64
  39. James, M.N.; Vasco-Olmo, J.M.; Díaz, F.A.; Antunes, F.V.; Bing, Yang; Huang, Yongfang. "Characterisation of fatigue crack growth using the CJP model of crack tip fields or plastic CTOD". Procedia Structural Integrity 23 (2019): 613-619. http://dx.doi.org/10.1016/j.prostr.2020.01.154.
    Published • 10.1016/j.prostr.2020.01.154
  40. Branco, R.; Silva, J.; Ferreira, J. Martins; Costa, J.D.; Capela, C.; Berto, F.; Santos, L.; Antunes, F.V.. "Fatigue behaviour of maraging steel samples produced by SLM under constant and variable amplitude loading". Procedia Structural Integrity 22 (2019): 10-16. http://dx.doi.org/10.1016/j.prostr.2020.01.002.
    Published • 10.1016/j.prostr.2020.01.002
  41. Antunes, F.V.; Borges, M.F.; Marques, B.; Prates, P.; Branco, R.. "Crack tip mechanisms: a numerical analysis". Procedia Structural Integrity 23 (2019): 571-576. http://dx.doi.org/10.1016/j.prostr.2020.01.147.
    10.1016/j.prostr.2020.01.147
  42. Branco, R.; Borrego, L.P.; Costa, J.D.; Antunes, F.V.. "Effect of pre-strain on cyclic plastic behaviour of 7050-T6 aluminium alloy". Procedia Structural Integrity 17 (2019): 177-182. http://dx.doi.org/10.1016/j.prostr.2019.08.024.
    10.1016/j.prostr.2019.08.024
  43. Camas, D.; Antunes, F.; Moreno, B.; Gonzalez-Herrera, A.. "Numerical analysis of the influence of the last cycle scheme on plasticity induced crack closure". Procedia Structural Integrity 17 (2019): 894-899. http://dx.doi.org/10.1016/j.prostr.2019.08.119.
    10.1016/j.prostr.2019.08.119
  44. Vasco-Olmo, J.M.; Díaz, F.A.; Antunes, F.V.; James, M.N.. "Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC". Frattura ed Integrita Strutturale 13 50 (2019): 658-666. http://www.scopus.com/inward/record.url?eid=2-s2.0-85073432986&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.50.56
  45. Antunes, F.V.; Branco, R.; Ferreira, J.A.M.; Borrego, L.P.. "Stress intensity factor solutions for CTS mixed mode specimen". Frattura ed Integrita Strutturale 13 48 (2019): 676-692. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064246781&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.48.64
  46. Antunes, F.V.; Branco, R.; Prates, P.; Costa, J.D.M.. "Fatigue crack growth in notched specimens: A numerical analysis". Frattura ed Integrita Strutturale 13 48 (2019): 666-675. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064264662&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.48.63
  47. Borges, M.F.; Antunes, F.V.; Prates, P.; Branco, R.; Oliveira, M.C.. "Effect of yield stress on fatigue crack growth". Frattura ed Integrita Strutturale 13 50 (2019): 9-19. http://www.scopus.com/inward/record.url?eid=2-s2.0-85073446827&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.50.02
  48. Cruces, Alejandro; Lopez-Crespo, Pablo; Moreno, Belen; Antunes, Fernando. "Multiaxial Fatigue Life Prediction on S355 Structural and Offshore Steel Using the SKS Critical Plane Model". Metals 8 12 (2018): 1060. http://dx.doi.org/10.3390/met8121060.
    Open access • Published • 10.3390/met8121060
  49. Antunes, F.V.; Serrano, S.; Branco, R.; Prates, P.. "Fatigue crack growth in the 2050-T8 aluminium alloy". International Journal of Fatigue 115 (2018): 79-88. http://dx.doi.org/10.1016/j.ijfatigue.2018.03.020.
    Published • 10.1016/j.ijfatigue.2018.03.020
  50. Branco, Ricardo; Costa, J.D.; Berto, Filippo; Antunes, F.V.. "Fatigue life assessment of notched round bars under multiaxial loading based on the total strain energy density approach". Theoretical and Applied Fracture Mechanics 97 (2018): 340-348. http://dx.doi.org/10.1016/j.tafmec.2017.06.003.
    Published • 10.1016/j.tafmec.2017.06.003
  51. F.V. Antunes; F.A. Díaz; J.M. Vasco-Olmo; P. Prates. "Numerical determination of plastic CTOD". Fatigue & Fracture of Engineering Materials & Structures (2018): 1-11. https://doi.org/10.1111/ffe.12869.
    Published • 10.1111/ffe.12869
  52. Branco, Ricardo; Costa, José; Berto, Filippo; Razavi, Seyed; Ferreira, José; Capela, Carlos; Santos, Luís; Antunes, Fernando. "Low-Cycle Fatigue Behaviour of AISI 18Ni300 Maraging Steel Produced by Selective Laser Melting". Metals 8 1 (2018): 32. http://dx.doi.org/10.3390/met8010032.
    Published • 10.3390/met8010032
  53. Lopez-Crespo, P.; Camas, D.; Antunes, F.V.; Yates, J.R.. "A study of the evolution of crack tip plasticity along a crack front". Theoretical and Applied Fracture Mechanics 98 (2018): 59-66. http://www.scopus.com/inward/record.url?eid=2-s2.0-85054040645&partnerID=MN8TOARS.
    10.1016/j.tafmec.2018.09.012
  54. F. V. Antunes; R. Branco; P. A. Prates; L. Borrego. "Fatigue crack growth modelling based on CTOD for the 7050-T6 alloy". Fatigue & Fracture of Engineering Materials & Structures 40 8 (2017): 1309-1320. https://doi.org/10.1111%2Fffe.12582.
    Published • 10.1111/ffe.12582
  55. Baptista, J.B.; Antunes, F.V.; Correia, L.; Branco, R.. "A numerical study of the effect of single overloads on plasticity induced crack closure". Theoretical and Applied Fracture Mechanics 88 (2017): 51-63. http://dx.doi.org/10.1016/j.tafmec.2016.12.001.
    Published • 10.1016/j.tafmec.2016.12.001
  56. Branco, R.; Costa, J.D.; Berto, F.; Antunes, F.V.. "Effect of loading orientation on fatigue behaviour in severely notched round bars under non-zero mean stress bending-torsion". Theoretical and Applied Fracture Mechanics 92 (2017): 185-197. http://www.scopus.com/inward/record.url?eid=2-s2.0-85025432064&partnerID=MN8TOARS.
    10.1016/j.tafmec.2017.07.015
  57. Vasco-Olmo, J.M.; Díaz, F.A.; Antunes, F.V.; James, M.N.. "Experimental evaluation of CTOD in constant amplitude fatigue crack growth from crack tip displacement fields". Frattura ed Integrita Strutturale 11 41 (2017): 157-165. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021884570&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.41.22
  58. Antunes, F.V.; Simões, R.; Branco, R.; Prates, P.. "Effect of numerical parameters on plastic CTOD". Frattura ed Integrita Strutturale 11 41 (2017): 149-156. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021935373&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.41.21
  59. Camas, Daniel; Loureiro, Pedro; Prates, Pedro; Antunes, Fernando. "Numerical Determination of Fatigue Threshold from CTOD". Solid State Phenomena 258 (2016): 290-293. http://dx.doi.org/10.4028/www.scientific.net/ssp.258.290.
    Published • 10.4028/www.scientific.net/ssp.258.290
  60. Antunes, F.V.; Rodrigues, S.M.; Branco, R.; Camas, D.. "A numerical analysis of CTOD in constant amplitude fatigue crack growth". Theoretical and Applied Fracture Mechanics 85 (2016): 45-55. http://dx.doi.org/10.1016/j.tafmec.2016.08.015.
    Published • 10.1016/j.tafmec.2016.08.015
  61. F.V. Antunes; F.A. Castanheira; R. Branco. "A numerical analysis of the mechanisms behind plasticity induced crack closure: Application to variable amplitude loadings". International Journal of Fatigue 89 (2016): 43-52. https://doi.org/10.1016%2Fj.ijfatigue.2015.12.006.
    Published • 10.1016/j.ijfatigue.2015.12.006
  62. Maia, Rúben; Branco, Ricardo; Antunes, F. V.; Oliveira, M. C.; Kotousov, Andrei. "Three-Dimensional Computational Analysis of Stress State Transition in Through-Cracked Plates". Mathematics in Computer Science 10 3 (2016): 343-352. http://dx.doi.org/10.1007/s11786-016-0267-z.
    Published • 10.1007/s11786-016-0267-z
  63. Antunes, FV; Branco, R; Correia, L; Ramalho, AL; Mesquita, S. "Numerical validation of crack closure concept using non-linear crack tip parameters". Procedia Structural Integrity 1 (2016): 90-97. http://dx.doi.org/10.1016/j.prostr.2016.02.013.
    10.1016/j.prostr.2016.02.013
  64. Branco, R.; Costa, J.D.M.; Antunes, F.V.; Perdigão, S.. "Monotonic and cyclic behavior of DIN 34CrNiMo6 tempered alloy steel". Metals 6 5 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84964842654&partnerID=MN8TOARS.
    10.3390/met6050098
  65. Antunes, F.V.; Correia, L.; Camas, D.; Branco, R.. "Effect of compressive loads on plasticity induced crack closure". Theoretical and Applied Fracture Mechanics 80 (2015): 193-204. http://dx.doi.org/10.1016/j.tafmec.2015.09.001.
    Published • 10.1016/j.tafmec.2015.09.001
  66. Antunes, F.V.; Camas, D.; Correia, L.; Branco, R.. "Finite element meshes for optimal modelling of plasticity induced crack closure". Engineering Fracture Mechanics 142 (2015): 184-200. http://dx.doi.org/10.1016/j.engfracmech.2015.06.007.
    Published • 10.1016/j.engfracmech.2015.06.007
  67. Branco, Ricardo; Antunes, F.V.; Costa, J.D.. "A review on 3D-FE adaptive remeshing techniques for crack growth modelling". Engineering Fracture Mechanics 141 (2015): 170-195. http://dx.doi.org/10.1016/j.engfracmech.2015.05.023.
    Published • 10.1016/j.engfracmech.2015.05.023
  68. Antunes, F. V.; Chegini, A. G.; Camas, D.; Correia, L. "Empirical model for plasticity-induced crack closure based onKmaxand ¿K". Fatigue & Fracture of Engineering Materials & Structures 38 8 (2015): 983-996. http://dx.doi.org/10.1111/ffe.12298.
    Published • 10.1111/ffe.12298
  69. Antunes, F.V.; Sousa, T.; Branco, R.; Correia, L.. "Effect of crack closure on non-linear crack tip parameters". International Journal of Fatigue 71 (2015): 53-63. http://dx.doi.org/10.1016/j.ijfatigue.2014.10.001.
    Published • 10.1016/j.ijfatigue.2014.10.001
  70. Minea, Alina Adriana; Amaro, Ana Martins; Antunes, Fernando Ventura; Neto, Maria Augusta; Reis, Paulo Nobre Balbis. "RESONANT TECHNIQUES AS NON-DESTRUCTIVE TECHNIQUES (NDT) APPLIED TO COMPOSITE MATERIALS: CASE STUDY ON LOW VELOCITY IMPACTS DETECTION". Environmental Engineering and Management Journal 14 5 (2015): 1045-1052. http://dx.doi.org/10.30638/eemj.2015.115.
    Published • 10.30638/eemj.2015.115
  71. Antunes, F.V.; Chegini, A.G.; Branco, R.; Camas, D.. "A numerical study of plasticity induced crack closure under plane strain conditions". International Journal of Fatigue 71 (2015): 75-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-84915754107&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2014.03.016
  72. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.. "Initial crack length on the interlaminar fracture of woven carbon/epoxy laminates". Fibers and Polymers 16 4 (2015): 894-901. http://www.scopus.com/inward/record.url?eid=2-s2.0-84931268480&partnerID=MN8TOARS.
    10.1007/s12221-015-0894-z
  73. Antunes, F.V.; Branco, R.; Correia, L.; Ramalho, A.L.. "A numerical study of non-linear crack tip parameters". Frattura ed Integrita Strutturale 9 33 (2015): 199-208. http://www.scopus.com/inward/record.url?eid=2-s2.0-84934294405&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.33.25
  74. Antunes, F.V.; Chegini, A.G.; Correia, L.; Branco, R.. "Numerical study of contact forces for crack closure analysis". International Journal of Solids and Structures 51 6 (2014): 1330-1339. http://dx.doi.org/10.1016/j.ijsolstr.2013.12.026.
    Published • 10.1016/j.ijsolstr.2013.12.026
  75. Branco, R.; Costa, J.D.; Antunes, F.V.. "Fatigue behaviour and life prediction of lateral notched round bars under bending–torsion loading". Engineering Fracture Mechanics 119 (2014): 66-84. http://dx.doi.org/10.1016/j.engfracmech.2014.02.009.
    Published • 10.1016/j.engfracmech.2014.02.009
  76. Branco, Ricardo; Costa, Jose; Antunes, Fernando. "Influence of Errors in Young’s Modulus on Fatigue Life Predictions of Notched Round Bars Under Bending-Torsion Loading". Recent Patents on Mechanical Engineering 7 1 (2014): 63-76. http://dx.doi.org/10.2174/2212797606666140107233109.
    Published • 10.2174/2212797606666140107233109
  77. Branco, R.; Antunes, F.V.; Costa, J.D.. "Notched M(T) specimen for plane strain studies". International Journal of Fatigue 58 (2014): 28-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887228871&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2013.01.011
  78. Branco, R.; Costa, J.D.; Antunes, F.V.; Bento, P.. "Comparative analysis of fatigue life predictions in lateral notched round bars under multiaxial loading". Technische Mechanik 34 3-4 (2014): 128-141. http://www.scopus.com/inward/record.url?eid=2-s2.0-84905265376&partnerID=MN8TOARS.
  79. Antunes, F. V.; Marques, G. A. S.; Chegini, A. G.; Correia, L.. "Transient behaviour in the numerical analysis of plasticity induced crack closure". Fatigue & Fracture of Engineering Materials & Structures 37 5 (2013): 526-538. http://dx.doi.org/10.1111/ffe.12134.
    Published • 10.1111/ffe.12134
  80. Reis, P. N. B.; Ferreira, J. A. M.; Pereira, A. M.; Antunes, F. J. V.. "Influence of Superposition Length on Transverse Impact Response of Single-Strap Adhesive Joints". The Journal of Adhesion 90 1 (2013): 65-79. http://dx.doi.org/10.1080/00218464.2013.797341.
    Published • 10.1080/00218464.2013.797341
  81. Antunes, F.V.; Correia, L.; Ramalho, A.L.. "A parameter for quantitative analysis of plasticity induced crack closure". International Journal of Fatigue 71 (2013): 87-97. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884392375&partnerID=MN8TOARS.
    Published • 10.1016/j.ijfatigue.2013.08.026
  82. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.. "Effect of saline environment on mechanical properties of adhesive joints". International Journal of Adhesion and Adhesives 47 (2013): 99-104. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888307917&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2013.08.002
  83. Branco, R.; Antunes, F.V.; Costa, J.D.. "Extent of the surface region in notched Middle Cracked Tension specimens". Key Engineering Materials 560 (2013): 107-127. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884271343&partnerID=MN8TOARS.
    10.4028/www.scientific.net/KEM.560.107
  84. Antunes, F.V.; Chegini, A.G.; Correia, L.M.; Ramalho, A.L.. "Effect of crack propagation on crack tip fields". Frattura ed Integrita Strutturale 7 25 (2013): 54-60. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883264999&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.25.09
  85. Pereira, A.M.; Ferreira, J.A.M.; Antunes, F.V.; Bártolo, P.J.. "Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints". Journal of Adhesion Science and Technology 28 14-15 (2012): 1432-1450. http://dx.doi.org/10.1080/01694243.2012.698107.
    Published • 10.1080/01694243.2012.698107
  86. Branco, R.; Antunes, F.V.; Costa, J.D.; Yang, F.P.; Kuang, Z.B.. "Determination of the Paris law constants in round bars from beach marks on fracture surfaces". Engineering Fracture Mechanics 96 (2012): 96-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869507973&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2012.07.009
  87. Branco, R.; Antunes, F.V.; Ricardo, L.C.H.; Costa, J.D.. "Extent of surface regions near corner points of notched cracked bodies subjected to mode-I loading". Finite Elements in Analysis and Design 50 (2012): 147-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-84155170865&partnerID=MN8TOARS.
    10.1016/j.finel.2011.09.006
  88. Branco, R.; Costa, J.D.; Antunes, F.V.. "Low-cycle fatigue behaviour of 34CrNiMo6 high strength steel". Theoretical and Applied Fracture Mechanics 58 1 (2012): 28-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860457245&partnerID=MN8TOARS.
    10.1016/j.tafmec.2012.02.004
  89. Borrego, L.P.; Antunes, F.V.; Costa, J.D.; Ferreira, J.M.. "Numerical simulation of plasticity induced crack closure under overloads and high-low blocks". Engineering Fracture Mechanics 95 (2012): 57-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868193879&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2012.07.016
  90. Branco, R.; Antunes, F. V.; Costa, J. D.. "Lynx: A user-friendly computer application for simulating fatigue growth of planar cracks using FEM". Computer Applications in Engineering Education 22 3 (2011): 529-540. http://dx.doi.org/10.1002/cae.20578.
    Published • 10.1002/cae.20578
  91. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.. "Effect of adherend's rigidity on the shear strength of single lap adhesive joints". International Journal of Adhesion and Adhesives 31 4 (2011): 193-201. http://dx.doi.org/10.1016/j.ijadhadh.2010.12.003.
    Published • 10.1016/j.ijadhadh.2010.12.003
  92. Antunes, F.V.; Branco, R.; Rodrigues, D.M.. "Plasticity induced crack closure under plane strain conditions". Key Engineering Materials 465 (2011): 548-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952850009&partnerID=MN8TOARS.
    Published • 10.4028/www.scientific.net/KEM.465.548
  93. Antunes, F.V.; Ferreira, J.A.M.; Capela, C.. "Numerical modelling of the Young's modulus of syntactic foams". Finite Elements in Analysis and Design 47 2 (2011): 78-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-78049503984&partnerID=MN8TOARS.
    10.1016/j.finel.2010.09.007
  94. Pereira, A.M.; Ferreira, J.M.; Antunes, F.V.; Bártolo, P.J.. "Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints". Journal of Materials Processing Technology 210 4 (2010): 610-617. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349114944&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2009.11.006
  95. Antunes, F.V.; Rodrigues, D.M.; Branco, R.. "An analytical model of plasticity induced crack closure". Procedia Engineering 2 1 (2010): 1005-1014. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954102175&partnerID=MN8TOARS.
    10.1016/j.proeng.2010.03.109
  96. Borrego, L.P.; Costa, J.M.; Antunes, F.V.; Ferreira, J.M.. "Fatigue crack growth in heat-treated aluminium alloys". Engineering Failure Analysis 17 1 (2010): 11-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350712481&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.11.007
  97. Costa, J.M.; Pires, J.T.B.; Antunes, F.; Nobre, J.P.; Borrego, L.P.. "Residual stresses analysis of ND-YAG laser welded joints". Engineering Failure Analysis 17 1 (2010): 28-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449526840&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.11.001
  98. Capela, C.; Bolrão, J.; Antunes, F.V.; Camaño, P.. "Multiphase numerical modelling of metallic particle composites". Innovative Developments in Design and Manufacturing - Advanced Research in Virtual and Rapid Prototyping (2010): 269-274. http://www.scopus.com/inward/record.url?eid=2-s2.0-78649821124&partnerID=MN8TOARS.
  99. Branco, R.; Silva, J.M.; Infante, V.; Antunes, F.; Ferreira, F.. "Using a standard specimen for crack propagation under plain strain conditions". International Journal of Structural Integrity 1 4 (2010): 332-343. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955041547&partnerID=MN8TOARS.
    10.1108/17579861011099169
  100. Antunes, F.V.; Branco, R.; Costa, J.D.; Rodrigues, D.M.. "Plasticity induced crack closure in Middle-Crack Tension specimen: Numerical versus experimental". Fatigue and Fracture of Engineering Materials and Structures 33 10 (2010): 673-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956317806&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2010.01479.x
  101. Rodrigues, D.M.; Antunes, F.V.; Branco, R.. "Influence of material parameters on plasticity induced crack closure". Key Engineering Materials 417-418 (2010): 113-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350316423&partnerID=MN8TOARS.
    10.4028/www.scientific.net/KEM.417-418.113
  102. Capela, C.; Cerva, A.; Camaño, P.; Antunes, F.V.. "Design of ergonomic leisure chair". Innovative Developments in Design and Manufacturing - Advanced Research in Virtual and Rapid Prototyping (2010): 719-724. http://www.scopus.com/inward/record.url?eid=2-s2.0-78649809104&partnerID=MN8TOARS.
  103. Rodrigues, D.M.; Antunes, F.V.. "Finite element simulation of plasticity induced crack closure with different material constitutive models". Engineering Fracture Mechanics 76 9 (2009): 1215-1230. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349130773&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.01.014
  104. Branco, R.; Antunes, F.V.; Martins Ferreira, J.A.; Silva, J.M.. "Determination of Paris law constants with a reverse engineering technique". Engineering Failure Analysis 16 2 (2009): 631-638. http://www.scopus.com/inward/record.url?eid=2-s2.0-57649238414&partnerID=MN8TOARS.
    Published • 10.1016/j.engfailanal.2008.02.004
  105. Amaro, A.M.; Antunes, F.V.; Ramalho, A.. "Influence of ply sequence on the elastic properties of laminated composites". Advanced Composites Letters 18 5 (2009): 157-161. http://www.scopus.com/inward/record.url?eid=2-s2.0-77149157827&partnerID=MN8TOARS.
  106. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Richardson, M.O.W.. "Effect of interlayer delamination on mechanical behavior of carbon/epoxy laminates". Journal of Composite Materials 43 22 (2009): 2609-2621. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350478411&partnerID=MN8TOARS.
    10.1177/0021998309344649
  107. Pereira, A.M.; Ferreira, J.M.; Antunes, F.V.; Bártolo, P.J.. "Study on the fatigue strength of AA 6082-T6 adhesive lap joints". International Journal of Adhesion and Adhesives 29 6 (2009): 633-638. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349239350&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.02.009
  108. Ferreira, J.A.M.; Amaral, M.A.P.; Antunes, F.V.; Costa, J.D.M.. "A study on the mechanical behaviour of WC/Co hardmetals". International Journal of Refractory Metals and Hard Materials 27 1 (2009): 1-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-53549103585&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2008.01.013
  109. COSTA, J. D. M.; ANTUNES, F. J. V.; SILVA, V. R.; FERREIRA, J. A. M.. "Comparative analysis of fatigue life predictions in central notched specimens of Al-Mg-Si alloys". Fatigue & Fracture of Engineering Materials & Structures 27 9 (2008): 837-848. http://dx.doi.org/10.1111/j.1460-2695.2004.00735.x.
    Published • 10.1111/j.1460-2695.2004.00735.x
  110. Antunes, F.; Ramalho, A.; Ferreira, J.A.M.; Capela, C.; Reis, P.. "Determination of elastic properties by resonant technique: A sensitivity analysis". Journal of Testing and Evaluation 36 1 (2008): 89-99. http://www.scopus.com/inward/record.url?eid=2-s2.0-38549135459&partnerID=MN8TOARS.
  111. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.; Capela, C.. "A study of the mode i and mode II interlaminar fracture of carbon/epoxy bi-directional composites". 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures 2 (2008): 1454-1461. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866132080&partnerID=MN8TOARS.
  112. Branco, R.; Antunes, F.V.; Martins, R.F.. "Modelling fatigue crack propagation in CT specimens". Fatigue and Fracture of Engineering Materials and Structures 31 6 (2008): 452-465. http://www.scopus.com/inward/record.url?eid=2-s2.0-48249117521&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2008.01241.x
  113. Branco, R.; Antunes, F.V.. "Finite element modelling and analysis of crack shape evolution in mode-I fatigue Middle Cracked Tension specimens". Engineering Fracture Mechanics 75 10 (2008): 3020-3037. http://www.scopus.com/inward/record.url?eid=2-s2.0-40849137669&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2007.12.012
  114. Antunes, F.V.; Rodrigues, D.M.. "Numerical simulation of plasticity induced crack closure: Identification and discussion of parameters". Engineering Fracture Mechanics 75 10 (2008): 3101-3120. http://www.scopus.com/inward/record.url?eid=2-s2.0-40849120537&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2007.12.009
  115. Branco, R.; Rodrigues, D.M.; Antunes, F.V.. "Influence of through-thickness crack shape on plasticity induced crack closure". Fatigue and Fracture of Engineering Materials and Structures 31 2 (2008): 209-220. http://www.scopus.com/inward/record.url?eid=2-s2.0-42149172279&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2008.01216.x
  116. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.. "Flexural behaviour of hybrid laminated composites". Composites Part A: Applied Science and Manufacturing 38 6 (2007): 1612-1620. http://www.scopus.com/inward/record.url?eid=2-s2.0-34147160244&partnerID=MN8TOARS.
    10.1016/j.compositesa.2006.11.010
  117. Antunes, F.V.; Pereira, C.; Gaspar, M.C.. "Experimental evaluation of physical properties of bone structures". Applied Mechanics and Materials 5-6 (2006): 71-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-33749322538&partnerID=MN8TOARS.
    10.4028/www.scientific.net/AMM.5-6.71
  118. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.J.; Costa, J.D.M.. "Fatigue notch sensibility of thermoplastic glass fibres composites". Materials Science Forum 514-516 PART 1 (2006): 653-656. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849014255&partnerID=MN8TOARS.
  119. Borrego, L.P.; Antunes, F.V.; Costa, J.M.; Ferreira, J.M.. "Mixed-mode fatigue crack growth behaviour in aluminium alloy". International Journal of Fatigue 28 5-6 (2006): 618-626. http://www.scopus.com/inward/record.url?eid=2-s2.0-30844458842&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2005.07.047
  120. Reis, P.N.B.; Antunes, F.J.V.; Ferreira, J.A.M.. "Influence of superposition length on mechanical resistance of single-lap adhesive joints". Composite Structures 67 1 (2005): 125-133. http://dx.doi.org/10.1016/j.compstruct.2004.01.018.
    Published • 10.1016/j.compstruct.2004.01.018
  121. Abreu, L.M.P.; Costa, José Domingos M.; Ferreira, José A. Martins; Antunes, Fernando. "In-Phase Multiaxial Fatigue Analysis of Tubular AlMgSi Welded Specimens". Materials Science Forum 455-456 (2004): 303-306. http://dx.doi.org/10.4028/www.scientific.net/msf.455-456.303.
    Published • 10.4028/www.scientific.net/msf.455-456.303
  122. Capela, C.; Costa, J.D.; Antunes, F.; Ferreira, J.M.. "Thermal fatigue assessment of components made with particulate polymer composites". Theoretical and Applied Fracture Mechanics 42 2 (2004): 171-181. http://www.scopus.com/inward/record.url?eid=2-s2.0-5144233644&partnerID=MN8TOARS.
    10.1016/j.tafmec.2004.08.008
  123. Antunes, F.V.; Borrego, L.F.P.; Costa, J.D.; Ferreira, J.M.. "A numerical study of fatigue crack closure induced by plasticity". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 825-835. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042604662&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00738.x
  124. Antunes, F.J.V.; Costa, J.D.M.; Ferreira, J.A.M.. "Improvement of the mechanical response of an electrical component". Engineering Failure Analysis 10 5 (2003): 511-519. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141680213&partnerID=MN8TOARS.
    10.1016/S1350-6307(03)00038-4
  125. Antunes, F.V.; Ferreira, J.M.; Costa, J.D.; Capela, C.. "Fatigue life predictions in polymer particle composites". International Journal of Fatigue 24 10 (2002): 1095-1105. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036778784&partnerID=MN8TOARS.
    10.1016/S0142-1123(02)00016-6
  126. Antunes, F.V.; Ferreira, J.M.; Branco, C.M.; Byrne, J.. "Influence of stress state on high temperature fatigue crack growth in Inconel 718". Fatigue and Fracture of Engineering Materials and Structures 24 2 (2001): 127-135. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035245075&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2001.00375.x
  127. Antunes, F.V.; Ramalho, A.; Ferreira, J.M.. "Identification of fatigue crack propagation modes by means of roughness measurements". International Journal of Fatigue 22 9 (2000): 781-788. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034291126&partnerID=MN8TOARS.
    10.1016/S0142-1123(00)00048-7
  128. Antunes, F.V.; Ferreira, J.M.; Branco, C.M.; Byrne, J.. "Stress intensity factors for tunnelling corner cracks under mode I loading". Fatigue and Fracture of Engineering Materials and Structures 23 1 (2000): 81-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034429169&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2000.00215.x
  129. Antunes, F.V.; Ferreira, J.M.; Branco, C.M.; Byrne, J.. "High temperature fatigue crack growth in Inconel 718". Materials at High Temperatures 17 4 (2000): 439-448. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034480044&partnerID=MN8TOARS.
  130. Antunes, F.V.; Ferreira, J.M.; Byrne, J.. "Stress intensity factor calculation based on the work of external forces". International Journal of Fracture 98 1 (1999): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033319938&partnerID=MN8TOARS.
Preprint
  1. E.R. Sérgio; Fernando Antunes; Diogo Neto. "Fatigue crack growth modelling considering a damage regularization approach". 2023. https://doi.org/10.22541/au.168810696.65219888/v1.
    10.22541/au.168810696.65219888/v1
Thesis / Dissertation
  1. Santos, Joao Pedro dos. "Melhoria de um processo de aprovisionamento por AGV: Um caso de estudo na indústria automóvel". Master, 2019. http://hdl.handle.net/10316/86745.
  2. FV Antunes. "Análise de propagação de fendas de fadiga nas ligas de alumínio 7050 T7451 e 2050 T8". Master, Universidade de Coimbra, 2018.
  3. Cruz, Mauro Daniel Carvalho. "Efeito das propriedades elasto-plásticas na propagação de fendas por fadiga". Master, 2018. http://hdl.handle.net/10316/86073.
  4. Martins, Miguel Alexandre de Almeida. "Análise da propagação de fendas por fadiga em materiais metálicos baseada no CTOD.". Master, 2018. http://hdl.handle.net/10316/86028.
  5. Espada, Claudio Emanuel Teixeira. "Análise do Processo de Lixamento de Anéis de Pistão". Master, 2018. http://hdl.handle.net/10316/86037.
  6. Branco, Miguel Ângelo Ferreira. "Desenvolvimento e otimização do processo de escovamento externo em anéis de óleo com PVD". Master, 2018. http://hdl.handle.net/10316/86054.
  7. Alves, Pedro Rafael Lages. "Desenvolvimento de ferramenta numérica para o estudo de propagação de fendas por fadiga usando software comercial de elementos finitos". Master, 2017. http://hdl.handle.net/10400.26/18849.
  8. Ferreira, Mariana Santos de Campos. "Análise da propagação de fendas por fadiga baseada no CTOD para o aço inoxidável 304L". Master, 2017. http://hdl.handle.net/10316/82874.
  9. Simões, Rafael Ferreira. "Análise da propagação de fendas por fadiga com base no CTOD: efeito dos parâmetros numéricos". Master, 2017. http://hdl.handle.net/10316/83185.
  10. Santos, Nelson André Silvestre dos. "Melhoria do Alinhador de Placas LIS". Master, 2017. http://hdl.handle.net/10316/83184.
  11. Serrano, Samuel Morgado. "Análise da propagação de fendas por fadiga baseada no CTOD para a liga 2050-T8 AA". Master, 2017. http://hdl.handle.net/10316/83046.
  12. Duarte, Filipe Alexandre Zabelo. "Determinação da extensão da camada superficial em geometrias com entalhes severos". Master, 2016. http://hdl.handle.net/10316/37001.
  13. Almeida, André Lopes. "Estudo numérico de propagação de fendas por fadiga em juntas soldadas em T". Master, 2016. http://hdl.handle.net/10316/37020.
  14. Loureiro, Pedro Manuel Bastos. "Determinação numérica do limiar de fadiga". Master, 2016. http://hdl.handle.net/10316/36683.
  15. Rodrigues, Salomé Mesquita. "Propagação de fendas por fadiga: estudo numérico de CTOD". Master, 2016. http://hdl.handle.net/10316/38918.
  16. Marques, Hugo Jesus. "Desenvolvimento de ferramenta numérica para propagação de fendas por fadiga usando software comercial". Master, 2016. http://hdl.handle.net/10316/36919.
  17. Perdigão, Sandra Maria Gonçalves. "Extensão da vida à fadiga utilizando sobrecargas". Master, 2015. http://hdl.handle.net/10400.26/15296.
  18. Castanheira, Fábio Abrantes. "Propagação de fendas por fadiga: efeitos de blocos de carga". Master, 2015. http://hdl.handle.net/10316/39004.
  19. Paiva, Luís Filipe Ribeiro. "Propagação de fendas por fadiga: efeito de subcargas". Master, 2015. http://hdl.handle.net/10316/39006.
  20. Silva, Henrique Pereira da. "Comportamento mecânico de compósitos de fibra de vidro/epoxy nano-reforçados". PhD, Universidade de Coimbra, 2014. http://hdl.handle.net/10316/28115.
  21. Baptista, Joao Filipe Bandeira. "Propagação de fendas por fadiga: Efeitos transientes associados a variações de carga". Master, 2014. http://hdl.handle.net/10316/38970.
  22. Santos, Miguel Lino Diogo dos. "Relógio com turbilhão tri-axial de força constante.". Master, 2014. http://hdl.handle.net/10316/39023.
  23. Oliveira, Liliana Raquel Trindade. "Modelação numérica de delaminação em compósitos". Master, 2014. http://hdl.handle.net/10316/38847.
  24. Sousa, Tiago Daniel Braz de. "Propagação de fendas por fadiga: Influência do contacto nos parâmetros de extremidade de fenda". Master, 2014. http://hdl.handle.net/10316/38883.
  25. Bolrão, José António da Palma. "Reengenharia de uma polia de um sistema de ar condicionado". Master, 2013. http://hdl.handle.net/10400.8/3130.
  26. Marques, Goncalo Antonio Simoes. "Efeito transiente na análise numérica de fecho de fenda induzido por deformação plástica". Master, 2013. http://hdl.handle.net/10316/38884.
  27. Freire, Tiago J.B. Martins Gomes. "Modelação Numérica de Tensões Residuais de Origem Térmica". Master, 2011. http://hdl.handle.net/10316/20191.
  28. Antunes, Fernando Jorge Ventura. "Propagação de fendas por fadiga a alta temperatura em Inconel 718". PhD, 1999. http://hdl.handle.net/10316/1696.
  29. FV Antunes. "Utilização do Método dos Elementos Finitos na Determinação de Factores de Intensidade de Tensão". Master, Universidade de Coimbra, 1993.

Intellectual property

Patent
  1. FV Antunes. 2009. "Dispositivo para caracterização in-vitro de propriedades biomecânicas de ossos". Portugal.
    Granted/Issued
  2. FV Antunes. 2006. "Roda de velocípede com sistema de amortecimento integrado". Portugal.
    Granted/Issued
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2019/02/01 - 2019/07/05 Análise de propagação de fendas por fadiga utilizando o CTOD
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019/02/01 - 2019/07/05 Effect of elasto-plastic properties on fatigue crack growth
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/09/01 - 2019/02/25 Melhoria de um processo de aprovisionamento por AGV: Um caso de estudo na indústria automóvel
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/02/01 - 2018/09/24 Análise do Processo de Lixamento de Anéis de Pistão
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/02/01 - 2018/07/19 Análise da propagação de fendas de fadiga nas ligas de alumínio 7050-T7451 e 2050-T8
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/02/01 - 2018/07/19 Análise da propagação de fendas por fadiga em materiais metálicos baseada no CTOD.
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/02/01 - 2018/07/13 Efeito das propriedades elasto-plásticas na propagação de fendas por fadiga
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2012/09/01 - 2018/06/06 Previsão da vida de propagação à fadiga
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017/09/01 - 2018/02/22 Desenvolvimento e otimização do processo de escovamento externo em anéis de óleo com PVD
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2017/02/01 - 2017/07/06 Análise da propagação de fendas por fadiga baseada no CTOD para o aço inoxidável 304L
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2016/09/01 - 2017/02/01 Melhoria do Alinhador de Placas LIS
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2016/09/01 - 2017/02/01 Análise da propagação de fendas por fadiga com base no CTOD: efeito dos parâmetros numéricos
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2016/09/01 - 2017/02/01 Análise da propagação de fendas por fadiga baseada no CTOD para a liga 2050-T8 AA
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015/09/01 - 2016/02/01 Propagação de fendas por fadiga: estudo numérico de CTOD
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015/02/01 - 2015/09/01 Propagação de fendas por fadiga: efeito de subcargas
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015/02/01 - 2015/07/21 Propagação de fendas por fadiga: efeitos de blocos de carga
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014/02/01 - 2014/09/18 Propagação de fendas por fadiga: Efeitos transientes associados a variações de carga
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014/02/01 - 2014/07/21 Modelação numérica de delaminação em compósitos
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014/02/01 - 2014/07/02 Propagação de fendas por fadiga: Influência do contacto nos parâmetros de extremidade de fenda
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014/02/01 - 2014/07/01 Relógio com turbilhão tri-axial de força constante.
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2013/02/01 - 2013/09/16 Efeito transiente na análise numérica de fecho de fenda induzido por deformação plástica
Supervisor
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2010/09/01 - 2013/04/23 FATIGUE LIFE PREDICTION OF NOTCHED COMPONENTS SUBJECTED TO COMPLEX LOADING
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Distinctions

Award

2022 Scientific Merit
Portuguese Structural Integrity Society, Portugal
2018 Prémio Accesit melhor poster
Grupo Español de Fractura, Spain
2005 1º Lugar no 1º Concurso Nacional de Inventos e Protótipos – INVENTUMINHO 2005
Universidade do Minho - Campus de Azurém, Portugal
2004 1º Lugar no 1º Concurso de Ideias de Negócio
RODI, Portugal
2004 Certificado empreendedor- Concurso de Ideias de Negócio FIVE
Agência de Inovação, Portugal
2003 3º Lugar no concurso “Ideias sobre rodas”
Universidade de Coimbra, Portugal

Clube de Empresários de Coimbra , Portugal