???global.info.a_carregar???
Maria Cristina dos Santos Ribeiro is graduated in Civil Engineering (1999/FEUP), Ph.D. in Mechanical Engineering (2006/FEUP), and post-graduated in Advanced Studies in Building Rehabilitation (2010/FEUP) by Faculty of Engineering of University of Porto. She is research fellow as integrated member at ‘CERENA - Natural Resources and Environment Research Center’ under FEUP (Faculty of engineering of University of Porto), and collaborate member at ‘LAETA - Associated Laboratory for Energy, Transports and Aeronautics’ under INEGI (Institute of Science and Innovation in Mechanical and Industrial Engineering). She is also a collaborate researcher at Mining Engineering Department and invited professor at Civil Engineering Department of FEUP (Faculty of Engineering of University of Porto). Her main research fields concern mix-design of concrete-polymer composites materials according to end-use applications, hybrid composite systems, nanocomposites, composite materials flame retardancy processes and waste management solutions for fibre reinforced thermoset polymers. Published 45 articles in journals. Has 4 section(s) of books. Organized 3 event(s). Supervised 1 PhD thesis(es) e co-supervised 1. Supervised 1 MSc dissertation(s). Has received 2 awards and/or honors. Participates and/or participated as PhD Student Fellow in 3 project(s), Post-doc in 4 project(s), Post-doc Fellow in 2 project(s), Principal investigator in 2 project(s), Research Fellow in 3 project(s) and Technical development in 2 project(s).
Identification

Personal identification

Full name
Maria Cristina dos Santos Ribeiro

Citation names

  • MCS Ribeiro
  • Ribeiro MCS
  • MC Ribeiro
  • Cristina Ribeiro

Author identifiers

Ciência ID
4D16-0456-CC3B
ORCID iD
0000-0003-4008-3720
Researcher Id
J-4061-2013
Scopus Author Id
7201715506

Email addresses

  • cribeiro@inegi.up.pt (Professional)

Addresses

  • INEGI-Institute of Science and Innovation in Mechanical and Industrial Engineering / FEUP-Faculty of Engineering of University of Porto . Rua Dr. Roberto Frias, Campus da FEUP. 400, 4200-465, Porto, Porto, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Materials Engineering - Composites
  • Engineering and Technology - Nano-technology - Nano-materials
  • Engineering and Technology - Environmental Engineering
  • Engineering and Technology - Environmental Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Advanced (C1) Proficiency (C2) Advanced (C1) Advanced (C1) Proficiency (C2)
French Advanced (C1) Proficiency (C2) Advanced (C1) Advanced (C1) Proficiency (C2)
Italian Intermediate (B1) Upper intermediate (B2) Elementary (A2) Intermediate (B1) Upper intermediate (B2)
Catalan Beginner (A1) Upper intermediate (B2) Beginner (A1) Intermediate (B1) Upper intermediate (B2)
Education
Degree Classification
2014/05/01 - 2018/01/15
Attended
SFRH/BPD/98869/2013: Development of cost-effective waste management solutions for thermoset based GFRP scrap materials as reinforcement for concrete-polymer composites (Suspended grant due to long-term illness) (Pós-doutoramento)
Fundação para a Ciência e a Tecnologia, Portugal
2009 - 2010
Concluded
Estudos Avançados de Reabilitação do Património Edificado / Advanced Studies in Building Rehabilitation (Pós-Graduação)
Universidade do Porto Faculdade de Engenharia, Portugal
15
2007/01/01 - 2008/06/30
Concluded
SFRH/BPD/25394/2005: Nanomodification of binder matrixes of Concrete-Polymer composites. (Pós-doutoramento)
Fundação para a Ciência e a Tecnologia, Portugal
2001/01/01 - 2006
Concluded
Ph.D. Mechanical Engineering - Materials (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
"New Polymer Mortar Formulations: Development, Characterization and Application Forms" (THESIS/DISSERTATION)
Approved with unanimity
1999
Concluded
Civil Engineering (Licenciatura)
Universidade do Porto Faculdade de Engenharia, Portugal
"(Not applicable)" (THESIS/DISSERTATION)
13
Affiliation

Science

Category
Host institution
Employer
2022/07/12 - 2023/06/30 Auxiliary Researcher (Research) Universidade do Porto Faculdade de Engenharia, Portugal
2014/05/01 - 2018/01/15 Postdoc (Research) Fundação para a Ciência e a Tecnologia, Portugal
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
(...)
2012/01/01 - 2014/01/24 Postdoc (Research) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2010/09/20 - 2011/09/19 Postdoc (Research) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
2008/07/01 - 2010/06/30 Auxiliary Researcher (Research) Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2007/01/01 - 2008/06/30 Postdoc (Research) Fundação para a Ciência e a Tecnologia, Portugal
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Others

Category
Host institution
Employer
2018/01/15 - 2022/05 Long-term sick leave Fundação para a Ciência e a Tecnologia, Portugal
2001/01/01 - 2005/12/31 Doctoral research grant holder (FPA). Work Program: Optimization process of Polymer Mortars reinforced with GFRP fibres. Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
1999/10/01 - 2000/12/31 Research grant holder. Work Program: Durability assessment of Polymer Concrete Materials. Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Projects

Contract

Designation Funders
2022/07/12 - 2023/06/30 CAVALI - Cadeia de Valor do Lítio / Lithium Value Chain
POCI-01-0247-FEDER-047728
Post-doc Fellow
Universidade do Porto Faculdade de Engenharia, Portugal
Concluded
2011/04/01 - 2014/03/31 NANOCRETE - Development and optimization of polymer concrete nanocomposites with enhanced behaviour under fire and high service temperatures
Principal investigator
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Innovnano Materiais Avançados SA, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/01/01 - 2014/01/24 HybridPultrusion - Produção de Perfis Híbridos Pultrudidos / Production of Pultruded Hybrid Profiles
QREN Ref: co-promoção 21557
Post-doc Fellow
Universidade do Porto Faculdade de Engenharia, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Concluded
2010/09/20 - 2011/09/19 PultrEficaz - Optimização da Eficiência do Processo de Pultrusão / Efficiency Optimization of Pultrusion Process
PultrEficaz/5488/005/2010
Post-doc Fellow
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Agência Nacional de Inovação SA
Concluded
2008/01 - 2010/06 NoProMat - Novos Processos e Materiais / New Processes and Materials (CIFIAL/INEGI)
I&DT Empresas em Co-Promoção (CIFIAL-INEGI)
Post-doc
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2007/10/01 - 2008/03/31 SlogBetumes -Desenvolvimento de Sistema logístico de Betumes / Development of Bitumen Logisticals Chain (GALP/INEGI)
Proj. IDEIA (GALP-INEGI) funded by ADI
Post-doc
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Agência Nacional de Inovação SA
Concluded
2004/01/01 - 2006/12/31 MNAA - Materials Network for the Atlantic Arc
INTERREG
PhD Student Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
European Commission
Concluded
2004/01/01 - 2005/12/31 Desenvolvimento e endogeneização de tecnologias de betão polimérico / Development and endogeneisation of polymer concrete technologies
PRIME 70/2004/00116/296
PhD Student Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Agência Nacional de Inovação SA
Concluded
2002 - 2004 Desenvolvimento de estruturas hibridas betão polimérico/compósitos / Hybrid structures development of FRP-Polymer Concrete
POCTI/EME/2001/42820
PhD Student Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2000/10/01 - 2003/09/30 Long term properties of polymer concrete
Research Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
1999/10/02 - 2002/08/31 Highly durable precast special concrete reinforced with non-metallic rebars
BRITE-EURAM BRPR CT97-0708
Research Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
European Commission
Concluded
1999/10/01 - 2001 Desenvolvimento de Novos Betões Poliméricos / Development of new polymer concretes
PRAXISXXI/P/ECM/12277/1998
Research Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2009/11/01 - 2010/06/30 Desenvolvimento de sistemas modulares para pontes pedonais / Modular Systems Development for Pedestrian Bridges (INDUSE/INEGI)
Vale I&DT (INEGI/Induse)
Principal investigator
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Concluded
2010/03/01 - 2010/06/01 Desenvolvimento de novos conceitos de caixilharias em materiais compósitos / New concepts development of window frames made of composite materials (JOFEBAR/INEGI)
Vale I&DT -JOFEBAR/INEGI-
Post-doc
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Concluded
2007/01/01 - 2008/08/31 Desenvolvimento de produto direccionado à TNL -Sociedade de Equipamentos Ecológicos e Sistemas Ambientais / Product development addressed to TNL -Society of Environmental Equipments and Systems (TNL/INEGI)
TNL-UMEC
Technical development
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2002 - 2005 Impacto sobre placas de materiais compósitos aramídicas com protecção de argamassa polimérica
POCTI/EME/43228/2001
Technical development
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
Fundação para a Ciência e a Tecnologia

Instituto de Engenharia Mecanica e Gestao Industrial
Concluded
Outputs

Publications

Book chapter
  1. Ribeiro MCS; Fiúza, A.; Ferreira, A.J.M.. "Recycling and Reuse of Fiber Reinforced Polymer Wastes in Concrete Composite Materials". In Handbook of Composites from Renewable Materials (Vol 3: Physico-Chemical and Mechanical Characterization / Chapter 7)), edited by V.K. Thakur, M.K. Thakur and M.R. Kessler, 155-174. Beverly, United States: John Wiley & Sons and Scrivener Publishing, 2017.
    Published
  2. Ribeiro MCS; Sousa, S.P.B.; Baptista, João Manuel Abreu dos Santos. "Potential risks related to the polymer mortars production with nano ZrO2". In Occupational Safety and Hygiene III, edited by Arezes et al., 331-334. London, United Kingdom: Taylor & Francis Group, 2015.
    Published
  3. Ribeiro MCS; Sousa SPB; Baptista JS. "Polymeric nanocomposites production risk assessment using different qualitative analyses". In Occupational Safety and Hygiene II, edited by Arezes et al., 25-30. Taylor & Francis Group, 2014.
    Published
  4. Ribeiro MCS; Sousa, S.P.B.; Baptista, João Manuel Abreu dos Santos. "Risk assessment in processing polymer nanocomposites". In Occupational Safety and Hygiene, edited by Arezes et al., 187-190. London, United Kingdom: Taylor & Francis Group, 2013.
    Published
Conference abstract
  1. Ribeiro MCS; Ferreirra, AJM; Fiúza, António. "Updated Review on Recycling and Reuse of Fibre Reinforced Polymer Wastes into Concrete Based Materials". Paper presented in FIBRE CONCRETE 2015 - 8th International Conference (Technology, Design, application), Prague, 2015.
    Published
  2. Afonso, AT; Nóvoa, JPRO; Ribeiro MCS; Esteves, JLS; Marques, AT. "The use of natural resins, fibres and adobe for irrigation systems". Paper presented in Materiais 2013 - 7th International Materials Symposium of the Portuguese Materials Society, Coimbra, 2013.
    Published
  3. Ribeiro MCS; Castro, ACM; Silva, FG; Fiúza, A; Dinis, ML; Meixedo, JP. "A case study on the improvement of eco-efficiency ratios: Application to a composite processing industry". Paper presented in 1st International Conference and Exhibition - WASTES: Solutions, Treatments and Opportunities, Guimarães, 2011.
    Published
  4. Ribeiro MCS; Meixedo, JP; Fiúza, A; Dinis, ML; Castro, ACM; Costa, Carlos; Ferreira, Frederico; Alvim, MR. "Mechanical Behavior Analysis of Polyester Polymer Mortars Modified with Recycled GFRP Waste Material". Paper presented in ICECE 2011 - International Conference on Environment and Civil Engineering, Bangkok, 2011.
    Published
  5. Ferreira, Frederico; Costa, Carlos; Silva, FG; Castro, ACM; Ribeiro MCS; Meixedo, JP; Fiúza, A; Dinis, ML. "Finite Element Analysis (FEA) Applied to Heat Transfer Optimization Process of Pultrusion Die Systems". Paper presented in ICCAM 2011 - International Conference on Computational and Applied Mathematics, Bangkok, 2011.
    Published
  6. Ribeiro MCS; Nóvoa, PJR; Ferreira, AJM; Marques, AT. "Mechanical behaviour of polymer concrete modified with light organic aggregates". Paper presented in 2nd International Conference on Eco-Composites, London, 2003.
    Published
Conference paper
  1. Ribeiro MCS; Fiúza, A.; Ferreira, AJM. "Updated Review on Recycling and Reuse of Fibre Reinforced Polymer Wastes into Concrete Based Materials". Paper presented in FIBRE CONCRETE 2015 - 8th International Conference (Technology, Design, application), Prague, 2015.
    Published
  2. Ribeiro MCS; Susana, PBS; Baptista, JS. "Eficiência dos Equipamentos de Proteção Individual Perante a Exposição a Nanomateriais". Paper presented in CICOT 2015 - 3nd Working Conditions International Congress, Oporto, 2015.
    Published
  3. Ribeiro MCS; Fiuza, A.; Castro, ACM; Silva, FG; Meixedo, JP; Dinis, ML; Alvim, MR. "Sustainability Improvement of a Composites Materials' Industry through Recycling and Re-Engineering Process Approaches". Paper presented in M2D’ 2015 - 6th International Conference on Mechanics and Materials in Design, Ponta Delgada, Azores, 2015.
    Published
  4. Ribeiro MCS; Susana, PBS; Cruz, EM; Barrera, GM. "Mechanical Behaviour Analysis of Polyester Polymer Mortars Reinforced With Tire Rubber Fibres". Paper presented in Materiais 2015 – VII International Materials Symposium | XVII Conference of Sociedade Portuguesa dos Materiais, Porto, 2015.
    Published
  5. Ribeiro MCS; Susana, PBS; Nóvoa, PRO; Pereira, CM; Ferreira, AJM. "Mechanical Behaviour Assessment of Unsaturated Polyester Polymer Mortars Filled With Nano-Sized Al2O3 And ZrO2 Particles". Paper presented in Materiais 2015: VII International Materials Symposium | XVII Conference of Sociedade Portuguesa dos Materiais, Porto, 2015.
    Published
  6. Ribeiro MCS; Susana, PBS; Baptista, JS. "Potential risks related to the polymer mortars production with nano ZrO2". Paper presented in SHO 2015- International Symposium on Occupational Safety and Hygiene, Guimarães, 2015.
    Published
  7. Ribeiro MCS; Susana, PBS; Baptista, JS. "Risk Assessment of Polymer Mortars Modified with Nano Al2O3 and Phosphinates". Paper presented in DCE 2015 - 1 st Doctoral Congress in Engineering, Porto, 2015.
    Published
  8. Sousa, SPB; Ribeiro MCS; Nóvoa, PJR; Pereira, CM; Ferreira, AJM. "Argamassas poliméricas modificadas com nano-óxidos". Paper presented in PATORREB'15 - 5ª Conferência sobre Patologia e Reabilitação de Edifícios, Porto, 2015.
    Published
  9. Ribeiro MCS; Silva, Francisco; Arezes, P; Swuste, P; Susana, PBS; Baptista, JS. "Qualitative Risk Assessment during Polymer Mortar Test Specimens Preparation: Methods Comparison". Paper presented in NanoSafe 2014 - 4th International Conference, Grenoble, 2014.
    Published
  10. Ribeiro MCS; Susana, PBS; Baptista, JS. "R&D of Polymer Composite Materials Modified with Nano-Oxides and Phosphinates: Related Risk Assessment". Paper presented in ICEH 2014 - International Congress on Environmental Health, Porto, 2014.
    Published
  11. Ribeiro MCS; Castro, AMC; Silva, JFG; Dinis, ML; Fiúza, A. "An experimental study on recycling and reuse of pultruded composite material wastes". Paper presented in CRETE 2014 - 4th Industrial and Hazardous Waste Management Conference, Creete, 2014.
    Published
  12. Ribeiro MCS; Sousa, SPB; Nóvoa, P.R.O.. "An Investigation on Fire and Flexural Mechanical Behaviors of Nano and Micro Polyester Composites". Paper presented in ANM2014 - 5th International Conference on Advanced Nanomaterials, Aveiro, 2014.
    Published
  13. Ribeiro MCS; Castro, AMC; Silva, JFG; Meixedo, JP; Fiuza, A.; Dinis, ML. "A case study undertaken recycling & reuse of glass fiber reinforced thermoset polymer wastes of composite materials industry". Paper presented in Symbiosis 2014 - International Conference (under the framework of the eSYMBIOSIS project (www.esymbiosis.eu), which was co-financed by the LIFE+ Programme of the European Commission)19 th –21 st June 2014, Athenes, 2014.
    Published
  14. Ribeiro MCS; Sousa, SPB; Nóvoa, P.J.R.O; Ferreira, AJM; Pereira, CM. "Fire retardancy enhancement of unsaturated polyester polymer matrices filled with nano and micro oxides particles". Paper presented in MOIME 2014 - International Conference on Manufacturing, Optimization, Industrial and Material Engineering, Jakarta, 2014.
    Published
  15. Ribeiro MCS; Sousa, SPB; López, MM; Barrera, GM; Ferreira, AJM. "Mechanical behaviour analysis of polyester polymer mortars reinforced with luffa fibres". Paper presented in CLB-MCS 2014 – Congresso Luso-Brasileiro de Materiais de Construção Sustentáveis, Guimarães, 2014.
    Published
  16. Ribeiro MCS; Sousa, SPB; Nóvoa, JPRO; Pereira, CM. "Concrete-polymer composite materials modified with nano-oxides and phosphinates hybrid flame retardant systems". Paper presented in CLB-MCS 2014 – Congresso Luso-Brasileiro de Materiais de Construção Sustentáveis, Guimarães, 2014.
    Published
  17. Ribeiro MCS; Sousa, SPB; Baptista, JS. "Occupational issues of cementitious materials with nano-oxides". Paper presented in SHO 2014-International Symposium on Occupational Safety and Hygiene, Guimarães, 2014.
    Published
  18. Ribeiro MCS; Sousa, SPB; Nóvoa, JPRO; Pereira, CM; Ferreira, AJM. "Análise experimental do comportamento térmico e mecânico de compósitos poliméricos modificados com nano-óxidos metálicos e fosfinatos". Paper presented in CIBEM 2013 - XI Congreso Ibero-americano de Ingenieria Mecânica, La Plata, 2013.
    Published
  19. Ribeiro MCS; Sousa, SPB; Baptista, JS. "Polymer nano and submicro composites risk assessment". Paper presented in CICOT 2013- 2nd Working Conditions International Congress, Porto, 2013.
    Published
  20. Castro, ACM; Ribeiro MCS; Meixedo, JP; Silva, FJG; Fiúza, A; Dinis, ML; Alvim, MR. "PLSR models for mechanical strengths of concrete composite materials reinforced with pultrusion wastes". Paper presented in MME 2013 - The Mathematical Methods in Engineering International Conference, Porto, 2013.
    Published
  21. Ribeiro MCS; Sousa, SPB; Pereira, CM; Nóvoa, PJRO; Ferreira, AJM. "Thermal stability analysis of polyester based polymer mortars modified with Al2O3 nanoparticles and phosphinates hybrid flame retardant systems". Paper presented in ICCE21 - 21th Annual International Conference on Composites or Nano Engineering, Tenerife, 2013.
    Published
  22. Sousa, SPB; Nóvoa, PR; Pereira, MC; Rodrigues, J; Ferreira, AJM; Ribeiro MCS. "Fire Safety Analysis of Nanocomposites". Paper presented in ICCS17 - 17th International Conference on Composite Structures, Porto, 2013.
    Published
  23. Fiúza, A; Ribeiro MCS; Castro, ACM; Silva, FG; Meixedo, JP; Dinis, ML; Alvim, MR; Oliveira, Luís. "Eco-Efficiency approaches towards a sustainable Composite Materials Manufacturing Industry". Paper presented in 1st International Conference on Energy, Environment and Sustainability, Porto, 2012.
    Published
  24. Ribeiro MCS; Sousa, SPB; Ferreira, AJM. "An Experimental Study on the Reuse of Jute and Piassava Natural Fibers as Reinforcement for Polymer Mortar Materials". Paper presented in ISWA 2012 Word Congress (International Solid Waste Association), Florence, 2012.
    Published
  25. Ribeiro MCS; Castro, ACM; Silva, JG; Meixedo, JP; Fiuza, A.; Dinis, ML. "Assessing the Eco-Efficiency of a Composite Processing Industry: Evaluation and Quantification of Potential Improvements". Paper presented in WasteEng 2012 - 4th International Conference on Engineering for Waste and Biomass Valorisation, Porto, 2012.
    Published
  26. Ribeiro MCS; Castro, ACM; Fiúza, A; Dinis, ML; Silva, FG; Meixedo, JP. "New End-Use Application for GFRP Recyclates as Reinforcement for Concrete-Polymer Materials". Paper presented in ISWA 2012 Word Congress (International Solid Waste Association), Florence, 2012.
    Published
  27. Sousa, SPB; Cruz, Elisa; Lopez, Miguel; Martinez, GB; Ferreira, AJM; Ribeiro MCS. "Effects of Gamma Irradiated Fibres Reinforcement on Mechanical Behaviour of Polyester Polymer Mortars". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composites, Torino, 2012.
    Published
  28. Ribeiro MCS; Sousa, SPB; Ferreira, AJM. "Thermal and Mechanical Behaviour Analysis of Micro and Nano Oxide Particles modified Thermoset Polymers". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composites, Torino, 2012.
    Published
  29. Silva, FJG; Ferreira, Frederico; Costa, Carlos; Castro, ACM; Ribeiro MCS. "Optimizing the embedded heaters position in the pultrusion process". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composites, Torino, 2012.
    Published
  30. Ribeiro MCS; Fiúza, A; Dinis, ML; Castro, ACM; Silva, FG; Meixedo, JP. "Design of experiments applied to the optimization process of polymer concrete materials modified with GFRP recyclates". Paper presented in ASEM 11 - The 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, 2011.
    Published
  31. Ribeiro MCS; Fiúza, A; Castro, ACM; Dinis, ML; Silva, FG; Meixedo, JP. "New recycling approaches for thermoset polymeric composite wastes - An experimental study on polyester based concrete materials filled with fibre reinforced plastic recyclates". Paper presented in 1st International Conference and Exhibition - WASTES: Solutions, Treatments and Opportunities, Guimarães, 2011.
    Published
  32. Ferreira, Frederico; Costa, Carlos; Silva, FJG; Castro, ACM; Ribeiro MCS; Alvim, MR. "Poupança de energia na pultrusão". Paper presented in CIBEM 10 - 10º Congresso Ibero Americano de Engenharia Mecânica, Porto, 2011.
    Published
  33. Costa, Carlos; Ferreira, Frederico; Silva, FJG; Castro, ACM; Ribeiro MCS; Alvim, MR. "Optimização do processo de pultrusão". Paper presented in CIBEM 10 - 10º Congresso Ibero Americano de Engenharia Mecânica, Porto, 2011.
    Published
  34. Ribeiro MCS; Dinis, ML; Fiúza, A; Castro, ACM; Silva, FG; Meixedo, JP; Costa, Carlos; Ferreira, Frederico. "Reusability Assessment of Thermoset Polymeric Composite Waste as Reinforcement and Filler Replacement for Polymer Concrete Materials". Paper presented in ICCM18 - 18th International Conference on Composite Materials, Jeju, 2011.
    Published
  35. Ferreira, Frederico; Castro, ACM; Costa, Carlos; Silva, FG; Meixedo, JP; Fiúza, A; Dinis, ML; Ribeiro MCS; Alvim, MR. "Mathematical Modeling and Optimization of Heat Flow through Pultrusion Die Assembly System for Thermoset Composites". Paper presented in 9th AES-ATEMA'2011 International Conference, Montreal, 2011.
    Published
  36. Ribeiro MCS; Castro, ACM; Fiúza, A; Silva, FG; Dinis, ML; Meixedo, JP; Ferreira, Frederico; Costa, Carlos; Alvim, MR. "Experiments on New Polymer based Mortars filled with FRP Waste Recyclates - A Quantitative Analysis -". Paper presented in 9th AES-ATEMA'2011 International Conference, Montreal, 2011.
    Published
  37. Ribeiro MCS; Fiúza, A; Castro, ACM; Silva, FG; Meixedo, JP; Dinis, ML; Costa, Carlos; Ferreira, Frederico; Alvim, MR. "Recycling of Pultrusion Production Waste into Innovative Concrete-Polymer Composite Solutions". Paper presented in AEMT11 - International Conference on Advanced Engineering Materials and Technology, Sanya, 2011.
    Published
  38. Ribeiro MCS; Fiúza, A; Dinis, ML; Castro, ACM; Silva, FG; Meixedo, JP; Costa, Carlos; Ferreira, Frederico. "Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates - Application of Factorial Experimental Design". Paper presented in ICCS16 - 16th International Conference on Composite Structures, Porto, 2011.
    Published
  39. Ribeiro MCS; Fiúza, A; Dinis, ML; Castro, ACM; Silva, FG; Meixedo, JP; Alvim, MR. "Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates - A contribution to composite materials sustainability". Paper presented in ICCE 19 - 19th Annual Conference on Composites or Nano Engineering, Shangai, 2011.
    Published
  40. Ribeiro MCS; Castro, ACM; Fiúza, A; Silva, FG; Meixedo, JP; Dinis, ML; Costa, Carlos; Ferreira, Frederico. "GFRP waste reinforced polymer mortars: A new waste management solution for GFRP scrap material". Paper presented in ELCAS2 - 2nd International Exergy Life Cycle Assessment and Sustainability Workshop & Symposium, Nisyros, 2011.
    Published
  41. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Argamassas Poliméricas – Uma proposta de matriz de caracterização da durabilidade". Paper presented in CINCOS'10 - Congresso de Inovação na Construção Sustentável, Curia, 2010.
    Published
  42. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Aplicação do Método Factorial na Previsão do Ciclo de Vida Útil de Argamassas Poliméricas". Paper presented in ENMEC 2010 - Encontro Nacional de Materiais e Estruturas Compósitas, Porto, 2010.
    Published
  43. Ribeiro MCS; Pereira, CMC; Martins, MSS; Marques, AT; Ferreira, AJM. "Processamento e análise do comportamento mecânico de argamassas de epoxy modificadas com micro e nanopartículas de alumina". Paper presented in ENMEC 2010 - Encontro Nacional de Materiais e Estruturas Compósitas, Porto, 2010.
    Published
  44. Ribeiro MCS. "Effects of micro and nano-sized Al2O3 particles on mechanical behaviour and fire reaction properties of epoxy polymer mortars". Paper presented in ICPIC 2010 - 13th International Conference on Polymers in Concrete, Funchal, Madeira Islands, 2010.
    Published
  45. Ribeiro MCS; Ferreira, AJM; Marques, ATM. "Composite Assembly Systems of GFRP and Polymer Based Concrete Materials". Paper presented in FRPRCS'09 - 9th International Symposium on Fibre Reinforced Polymer Reinforcement for Concrete Structures, Sydney, 2009.
    Published
  46. Ribeiro MCS; Vogt, Jordanna C.; Marques, AT; Ferreira, AJM. "Mechanical Behaviour of Polymer Mortars Reinforced with Jute and Piassava Natural Fibres under Alkaline Environments". Paper presented in Materials' 2009 - V International Materials Symposium, Lisbon, 2009.
    Published
  47. Ribeiro MCS; Juvandes, L; Rodrigues, JD; Ferreira, AJM; Marques, AT. "Investigating Resistance of Cement and Polymer Mortar Materials to Rapid Freeze-Thaw Cycling: Comparative Study and Evaluation of Test Methodologies". Paper presented in Materials' 2009 - V International Materials Symposium, Lisbom, 2009.
    Published
  48. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Natural and artificial weathering effects on long-term performance of polymer mortars". Paper presented in MCM 2008 - XV International Conference on Mechanics of Composite Materials, Riga, 2008.
    Published
  49. Ribeiro MCS; Rodrigues, JA; Ferreira, AJM; Marques, AT. "Fire reaction behaviour of flame retardant epoxy polymer mortars". Paper presented in CCC 2008 - Challenges for Civil Construction, Porto, 2008.
    Published
  50. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Weatherability of epoxy and polyester polymer mortars under maritime environments". Paper presented in CCC 2008 - Challenges for Civil Construction, Porto, 2008.
    Published
  51. Ribeiro MCS; Rodrigues, JA; Ferreira, AJM; Marques, AT. "Fire Behaviour Enhancement of Epoxy Polymer Mortars Modified with Flame Retardant Systems". Paper presented in Materials' 2007 - IV International Materials Symposium, Porto, 2007.
    Published
  52. Ribeiro MCS; Rodrigues, JA; Ferreira, AJM; Marques, AT. "Fire Reaction Assessment of Epoxy Polymer Mortars Modified with Flame Retardant Systems". Paper presented in ECCM 12 - 12th European Conference on Composite Materials, Biarritz, 2006.
    Published
  53. Ribeiro MCS; Nóvoa, PRO; Ferreira, AJM; Marques, AT. "Mechanical behaviour of lightweight wood fibre-modified polymer concrete". Paper presented in CompTest 2006 - 3rd International Conference on Composites Testing and Model Identification, Porto, 2006.
    Published
  54. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Behaviour of hybrid polymer concrete-composite materials". Paper presented in INTERREG III - Workshop on Advances on Composite and Polymer Mechanics and Process Simulation, Porto, 2005.
    Published
  55. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Development of composite hybrid structures based on polymer concrete – GFRP pultrusion profiles assembly system". Paper presented in CCC 2005 - 3rd International Conference on Composites in Construction, Lyon, 2005.
    Published
  56. Nóvoa, PRO; Ribeiro MCS; Ferreira, AJM. "Development of lightweight polymer mortars based on binary aggregate compositions". Paper presented in CCC 2005 - 3rd International Conference on Composites in Construction, Lyon, 2005.
    Published
  57. Novo, C; Nóvoa, PRO; Ribeiro MCS; Ramos, C; Ferreira, AJM; Marques, AT. "Health monitoring with FRG sensors applied on polymer concrete structures". Paper presented in CCC 2005 - 3rd International Conference on Composites in Construction, Lyon, 2005.
    Published
  58. RIBEIRO, M. C. S.; FERREIRA, A. J. M.; MARQUES, A. T.. "Flexural Behaviour of GFRP-Polymer Concrete Hybrid Structural Systems". Paper presented in FRPRCS 6 - 6th International Symposium on FRP Reinforcement for Concrete Structures (FRPRCS-6), Singapore, 2003.
    Published • 10.1142/9789812704863_0065
  59. Nóvoa, JPR; Ribeiro MCS; Ferreira, AJM. "Mechanical behaviour of cork-modified polymer concrete". Paper presented in Materials'2003 - II International Materials Symposium, Caparica, 2003.
    Published
  60. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Durability assessment of unsaturated polyester and epoxy polymer mortars". Paper presented in ARQUIMACOM '02 - IV Conferência Internacional de Compósitos na Arquitetura e Construção Civil, São Paulo, 2002.
    Published
  61. Ribeiro MCS; Ferreira, AJM; Marques, AT. "Analysis and experiments on GFRP-Polymer concrete hybrid beams". Paper presented in International Conference on Polymer Concretes, Mortars and Asphalts, Porto, 2002.
    Published
  62. Tavares, CML; Ribeiro MCS; Ferreira, AJM; Marques, AT. "Flexural analysis of polymer concrete beams reinforced with steel and pultruded rebars". Paper presented in ECCM10 - 10th European Conference on Composite Materials, Bruges, 2002.
    Published
  63. Ferreira, AJM; Marques, AT; Tavares, CML; Ribeiro MCS. "Polymer concrete under severe conditions". Paper presented in ORGAGEC'02 - Organic materials: A future in the field of civil engineering? Environmental uncertainties?, Poitiers, 2002.
    Published
  64. Ribeiro MCS; Tavares, CML; Ferreira, AJM; Marques, AT. "Static flexural performance of GFRP-polymer concrete Hybrid beams". Paper presented in CICE 2001 - International Conference on FRP Composites in Civil Engineering, Hong-Kong, 2001.
    Published
  65. Tavares, CML; Ribeiro MCS; Ferreira, AJM; Guedes, RM. "Creep Behaviour of frp-reinforced polymer concrete". Paper presented in ICCS - 11th International Conference on Composite Structures, Melbourne, 2001.
    Published
  66. Tavares, CML; Ribeiro MCS; Monteiro, Delfim; Camanho, PP; Ferreira, AJM. "Experimental investigation into the static and fatigue behaviour of polymer concrete reinforced with GFRP rods". Paper presented in CCC 2001 - International Conference on Composites in Construction, Porto, 2001.
    Published
  67. Ribeiro MCS; Tavares, CML; Ferreira, AJM; Paulo, AMC; Silva, MAG. "Mechanical behaviour of degraded polymer concrete". Paper presented in CCC 2001 - International Conference on Composites in Construction, Porto, 2001.
    Published
  68. Ribeiro MCS; Tavares, MCL; Ferreira, AJM; Marques, AT. "Static flexural performance of GFRP-polymer concrete Hybrid beams". Paper presented in Materials' 2001 - I International Symposium Materials, Coimbra, 2001.
    Published
  69. Tavares, CML; Ribeiro MCS; Figueiredo, Miguel; Ferreira, AJM; Fernandes, AA. "Caracterização mecânica em flexão de betões de resina poliéster e epóxida". Paper presented in Encontro Nacional Betão Estrutural 2000, Porto, 2000.
    Published
  70. Tavares, CML; Ribeiro MCS; Figueiredo, Miguel; Ferreira, AJM; Fernandes, AA. "Influence of Material Parameters in the Mechanical Behaviour of Polymer Concrete". Paper presented in MMD3 - Mechanical and Materials in Design 3, Orlando, 2000.
    Published
Conference poster
  1. MCS Ribeiro; Fiuza, A.; Dinis, ML; Meira-Castro, A.C.. "Life Cycle Impact Assessment of Lithium Mineral Concentrates Production for FEB Applications". Paper presented in IRTC Conference on Raw Materials for a Sustainable Future, 2023.
  2. Afonso, AT; Nóvoa, PJRO; Ribeiro MCS; Esteves, JLS; Marques, AT. "The use of natural resins, fibres and adobe for irrigation systems". Paper presented in Materiais 2013 - 7th International Materials Symposium of the Portuguese Materials Society, 2013.
  3. Ribeiro MCS; Castro, ACM; Silva, FG; Fiúza, A; Dinis, ML; Meixedo, JP. "A case study on the improvement of eco-efficiency ratios: Application to a composite processing industry". Paper presented in 1st International Conference and Exhibition - WASTES: Solutions, Treatments and Opportunities,, 2011.
  4. Ribeiro MCS; Juvandes, L; Rodrigues, JD; Ferreira, AJM; Marques, AT. "Evaluation of ASTM C666 Test Methodology for the Assessment of Freeze-Thaw Resistance of High Performance Polymer Mortar Materials". Paper presented in ICCS 15 - 15th International Conference on Composite Structures, 2009.
  5. Ribeiro MCS; Nóvoa, PJR; Ferreira, AJM; Marques, AT. "Mechanical behaviour of polymer concrete modified with light organic aggregates". Paper presented in 2nd International Conference on Eco-Composites, London, UK, 2003.
Edited book
  1. Ribeiro MCS. Recent Advances in Mechanics and Materials in Design: Proceedings of M2D'2015: 6th International Conference on Mechanics and Materials in Design (Associate Editor under Symposium 22: Recycling and Re-use of Industrial and Household Wastes into New Composite Materials). 2015.
    Published • Editor
Journal article
  1. Martínez-Barrera, Gonzalo; del Coz-Díaz, Juan José; Martínez-Cruz, Elisa; Martínez-López, Miguel; Ribeiro, Maria C.S.; Velasco-Santos, Carlos; Lobland, Haley E. Hagg; Brostow, Witold. "Modified recycled tire fibers by gamma radiation and their use on the improvement of polymer concrete". Construction and Building Materials 204 (2019): 327-334. http://dx.doi.org/10.1016/j.conbuildmat.2019.01.177.
    Published • 10.1016/j.conbuildmat.2019.01.177
  2. Martínez-López, Miguel; Martínez-Barrera, Gonzalo; del Coz-Díaz, Juan José; Martínez-Martínez, Juan Enrique; Gencel, Osman; Ribeiro, Maria C.S.; Varela-Guerrero, Víctor. "Polymer waste materials as fillers in polymer mortars: experimental and finite elements simulation". Case Studies in Construction Materials 9 (2018): e00178. http://dx.doi.org/10.1016/j.cscm.2018.e00178.
    Published • 10.1016/j.cscm.2018.e00178
  3. Silva, F.J.G.; Baptista, A.; Pinto, G.; Campilho, R.D.S.G.; Ribeiro, M.C.S.. "Characterization of hybrid pultruded structural products based on preforms". Composites Part B: Engineering 140 (2018): 16-26. http://dx.doi.org/10.1016/j.compositesb.2017.12.019.
    Published • 10.1016/j.compositesb.2017.12.019
  4. Sousa, S.P.B.; Ribeiro, M.C.S.; Nóvoa, P.R.O.; Pereira, C.M.; Ferreira, A.J.M.. "Mechanical behaviour assessment of unsaturated polyester polymer mortars filled with nano-sized Al2O3 and ZrO2 particles". Ciência & Tecnologia dos Materiais 29 1 (2017): e167-e171. http://dx.doi.org/10.1016/j.ctmat.2016.08.002.
    Published • 10.1016/j.ctmat.2016.08.002
  5. Sousa, S.P.B.; Ribeiro, M.C.S.; Cruz, E.M.; Barrera, G.M.; Ferreira, A.J.M.. "Mechanical behaviour analysis of polyester polymer mortars reinforced with tire rubber fibres". Ciência & Tecnologia dos Materiais 29 1 (2017): e162-e166. http://dx.doi.org/10.1016/j.ctmat.2016.07.009.
    Published • 10.1016/j.ctmat.2016.07.009
  6. Ribeiro, Maria; Fiúza, António; Ferreira, António; Dinis, Maria; Meira Castro, Ana; Meixedo, João; Alvim, Mário. "Recycling Approach towards Sustainability Advance of Composite Materials' Industry". Recycling 1 1 (2016): 178-193. http://dx.doi.org/10.3390/recycling1010178.
    Published • 10.3390/recycling1010178
  7. Ribeiro, MCS; Dinis, ML; Castro, ACM; Fiúza, A; Ferreira, AJM; Meixedo, JP; Alvim, MR. "On the Recyclability of Glass Fiber Reinforced Thermoset Polymeric Composites towards the Sustainability of Polymers' Industry". International Journal of Waste Resources 6 3 (2016): http://dx.doi.org/10.4172/2252-5211.1000250.
    Published • 10.4172/2252-5211.1000250
  8. Ribeiro, M.C.S.; Meira-Castro, A.C.; Silva, F.G.; Santos, J.; Meixedo, J.P.; Fiúza, A.; Dinis, M.L.; Alvim, M.R.. "Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: A case study regarding GFRP pultrusion wastes". Resources, Conservation and Recycling 104 (2015): 417-426. http://dx.doi.org/10.1016/j.resconrec.2013.10.001.
    Published • 10.1016/j.resconrec.2013.10.001
  9. Silva, F; Sousa, S P B; Arezes, P; Swuste, P; Ribeiro, M C S; Baptista, J S. "Qualitative risk assessment during polymer mortar test specimens preparation - methods comparison". Journal of Physics: Conference Series 617 (2015): 012037. http://dx.doi.org/10.1088/1742-6596/617/1/012037.
    Published • 10.1088/1742-6596/617/1/012037
  10. Ribeiro, M.C.S.; Sousa, S.P.B.; Nóvoa, P.R.O.. "An Investigation on Fire and Flexural Mechanical Behaviors of Nano and Micro Polyester Composites Filled with SiO2 and Al2O3 Particles". Materials Today: Proceedings 2 1 (2015): 8-19. http://dx.doi.org/10.1016/j.matpr.2015.04.002.
    Published • 10.1016/j.matpr.2015.04.002
  11. Sousa, Susana P.B.; Ribeiro, Maria C.S.; Nóvoa, Paulo R.O.; Pereira, Celeste M.; Ferreira, António J.M.. "Polymer Composite Materials Modified with Nano-Oxides and Phosphinates Hybrid Flame Retardant Systems". Key Engineering Materials 634 (2014): 527-536. http://dx.doi.org/10.4028/www.scientific.net/kem.634.527.
    Published • 10.4028/www.scientific.net/kem.634.527
  12. Ribeiro, M. C. S.; Sousa, S. P. B.; Nóvoa, P. R. O.. "The Combined Effect of Phosphinates with Al2O3, Mg(OH)2 or SiO2 Nano/Micro Particles on Mechanical and Fire Reaction Properties of Unsaturated Polyester Composites". Advanced Science Letters 20 10 (2014): 2291-2298. http://dx.doi.org/10.1166/asl.2014.5724.
    Published • 10.1166/asl.2014.5724
  13. Ribeiro, M C S; Sousa, S P B; Nóvoa, P R O; Pereira, C M; Ferreira, A J M. "Fire retardancy enhancement of unsaturated polyester polymer resin filled with nano and micro particulate oxide additives". IOP Conference Series: Materials Science and Engineering 58 (2014): 012020. http://dx.doi.org/10.1088/1757-899x/58/1/012020.
    Published • 10.1088/1757-899x/58/1/012020
  14. Meira Castro, Ana C.; Carvalho, Joao P.; Ribeiro, Maria C.S.; Meixedo, João P.; Silva, Francisco J.G.; Fiúza, António; Dinis, Maria L.. "An integrated recycling approach for GFRP pultrusion wastes: recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets". Journal of Cleaner Production 66 (2014): 420-430. http://dx.doi.org/10.1016/j.jclepro.2013.10.030.
    Published • 10.1016/j.jclepro.2013.10.030
  15. Silva, F.J.G.; Ferreira, F.; Ribeiro, M.C.S.; Castro, Ana C.M.; Castro, M.R.A.; Dinis, M.L.; Fiúza, A.. "Optimising the energy consumption on pultrusion process". Composites Part B: Engineering 57 (2014): 13-20. http://dx.doi.org/10.1016/j.compositesb.2013.09.035.
    Published • 10.1016/j.compositesb.2013.09.035
  16. Ribeiro MCS; Sousa, SPB; Baptista, JS. "Polymer nano and submicro composites risk assessment". International Journal of Working Conditions 7 June 2014 (2014): 103-119. http://ricot.com.pt/artigos/1/IJWC.7_SSousa%20et%20al_103.119.pdf.
    Published
  17. Ribeiro, M.C.S.; Fiúza, A.; Castro, A.C.M.; Silva, F.G.; Dinis, M.L.; Meixedo, J.P.; Alvim, M.R.. "Mix design process of polyester polymer mortars modified with recycled GFRP waste materials". Composite Structures 105 (2013): 300-310. http://dx.doi.org/10.1016/j.compstruct.2013.05.023.
    Published • 10.1016/j.compstruct.2013.05.023
  18. Martínez-Barrera, Gonzalo; Vigueras-Santiago, Enrique; Martínez-López, Miguel; Ribeiro, Maria C.S.; Ferreira, Antonio J.M.; Brostow, Witold. "Luffa fibers and gamma radiation as improvement tools of polymer concrete". Construction and Building Materials 47 (2013): 86-91. http://dx.doi.org/10.1016/j.conbuildmat.2013.05.038.
    Published • 10.1016/j.conbuildmat.2013.05.038
  19. Meira Castro, A.C.; Ribeiro, M.C.S.; Santos, J.; Meixedo, J.P.; Silva, F.J.G.; Fiúza, A.; Dinis, M.L.; Alvim, M.R.. "Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry". Construction and Building Materials 45 (2013): 87-94. http://dx.doi.org/10.1016/j.conbuildmat.2013.03.092.
    Published • 10.1016/j.conbuildmat.2013.03.092
  20. Ribeiro, M. C. S.; Pereira, C. M. C.; Sousa, S. P. B.; Nóvoa, P. R. O.; Ferreira, A. J. M.. "Fire Reaction and Mechanical Performance Analyses of Polymer Concrete Materials Modified with Micro and Nano Alumina Particles". Restoration of Buildings and Monuments 19 2-3 (2013): 195-202. http://dx.doi.org/10.1515/rbm-2013-6595.
    Published • 10.1515/rbm-2013-6595
  21. Silva, FJS; Ribeiro, MCS; Castro, ACM; Alvim, MR; Meixedo, JP; Fiúza, A; Dinis, ML. "Saving Energy in the GFRP Pultrusion Process". Journal of Research Updates in Polymer Science 2 (2013): 132-141. http://dx.doi.org/10.6000/1929-5995.2013.02.02.7.
    Published • 10.6000/1929-5995.2013.02.02.7
  22. Ribeiro, MCS; Castro, ACM; Silva, FJS; Meixedo, JP; Alvim, MR; Fiúza, A; Dinis, ML. "A Case Study on the Eco-Efficiency Performance of a Composite Processing Industry: Evaluation and Quantification of Potential Improvements". Journal of Research Updates in Polymer Science 2 (2013): 79-84. http://dx.doi.org/10.6000/1929-5995.2013.02.01.9.
    Published • 10.6000/1929-5995.2013.02.01.9
  23. Silva, F.J.G.; Ferreira, F.; Costa, C.; Ribeiro, M.C.S.; Meira Castro, A.C.. "Comparative study about heating systems for pultrusion process". Composites Part B: Engineering 43 4 (2012): 1823-1829. http://dx.doi.org/10.1016/j.compositesb.2012.01.057.
    Published • 10.1016/j.compositesb.2012.01.057
  24. Ribeiro, Maria Cristina S.; Fiúza, António; Castro, Ana Cristina; Silva, Francisco G.; Meixedo, João Paulo; Dinis, Maria Lurdes; Costa, Carlos; Ferreira, Frederico; Alvim, Mário Rui. "Recycling of Pultrusion Production Waste into Innovative Concrete-Polymer Composite Solutions". Advanced Materials Research 295-297 (2011): 561-565. http://dx.doi.org/10.4028/www.scientific.net/amr.295-297.561.
    Published • 10.4028/www.scientific.net/amr.295-297.561
  25. Ribeiro MCS; Meixedo, JP; Fiúza, A; Dinis, ML; Castro, ACM; Silva, AJS; Alvim, MR. "Mechanical Behavior Analysis of Polyester Polymer Mortars Modified with Recycled GFRP Waste Material". World Academy of Science, Engineering and Technology 75 (2011): 365-371.
    Published
  26. Silva, FJS; Castro, ACM; Ribeiro MCS; Meixedo, JP; Fiuza, A.; Dinis, ML. "Finite Element Analysis (FEA) Applied to Heat Transfer Optimization Process of Pultrusion Die Systems". World Academy of Science, Engineering and Technology 75 (2011): 270-276.
    Published
  27. Ribeiro, M.C.S.; Juvandes, L.F.P.; Rodrigues, J.D.; Ferreira, António J.M.; Marques, António Torres. "Behaviour of Cement and Polymer Mortar Materials to Rapid Freeze-Thaw Cycling". Materials Science Forum 636-637 (2010): 1329-1335. http://dx.doi.org/10.4028/www.scientific.net/msf.636-637.1329.
    Published • 10.4028/www.scientific.net/msf.636-637.1329
  28. Ribeiro, M.C.S.; Vogt, Jordanna C.; Marques, António Torres; Ferreira, António J.M.. "Mechanical Behaviour Analysis of Polymer Mortars Reinforced with Jute and Piassava Natural Fibres under Alkaline Environments". Materials Science Forum 636-637 (2010): 239-244. http://dx.doi.org/10.4028/www.scientific.net/msf.636-637.239.
    Published • 10.4028/www.scientific.net/msf.636-637.239
  29. Ribeiro, M. C. S.; Ferreira, A. J. M.; Marques, A. T.. "Effect of natural and artificial weathering on the long-term flexural performance of polymer mortars". Mechanics of Composite Materials 45 5 (2009): 515-526. http://dx.doi.org/10.1007/s11029-009-9104-7.
    Published • 10.1007/s11029-009-9104-7
  30. Ribeiro, M.C.S.; Rodrigues, J.A.; Ferreira, António J.M.; Marques, António Torres. "Fire Behaviour Enhancement of Epoxy Polymer Mortars Modified with Flame Retardant Systems". Materials Science Forum 587-588 (2008): 903-907. http://dx.doi.org/10.4028/www.scientific.net/msf.587-588.903.
    Published • 10.4028/www.scientific.net/msf.587-588.903
  31. Nóvoa, P.J.R.O; Ribeiro, M.C.S; Ferreira, A.J.M; Marques, A.T. "Mechanical characterization of lightweight polymer mortar modified with cork granulates". Composites Science and Technology 64 13-14 (2004): 2197-2205. http://dx.doi.org/10.1016/j.compscitech.2004.03.006.
    Published • 10.1016/j.compscitech.2004.03.006
  32. Ribeiro, M.C.S; Nóvoa, P.R; Ferreira, A.J.M; Marques, A.T. "Flexural performance of polyester and epoxy polymer mortars under severe thermal conditions". Cement and Concrete Composites 26 7 (2004): 803-809. http://dx.doi.org/10.1016/s0958-9465(03)00162-8.
    Published • 10.1016/s0958-9465(03)00162-8
  33. Nóvoa, Paulo J.R.O.; Ribeiro, M.C.S.; Ferreira, António J.M.. "Mechanical Behaviour of Cork-Modified Polymer Concrete". Materials Science Forum 455-456 (2004): 805-809. http://dx.doi.org/10.4028/www.scientific.net/msf.455-456.805.
    Published • 10.4028/www.scientific.net/msf.455-456.805
  34. Ferreira, A.J. Mendes; Ribeiro, M.C.S.; Marques, A. Torres. "Analysis of hybrid beams composed of GFRP profiles and polymer concrete". International Journal of Mechanics and Materials in Design 1 2 (2004): 143-155. http://dx.doi.org/10.1007/s10999-004-1493-0.
    Published • 10.1007/s10999-004-1493-0
  35. Ribeiro MCS; Nóvoa, P.J.R.O; Marques, AT; Ferreira, AJM. "Mechanical characterization of lightweight wood-modified polymer concrete". Science and Technology of Materials 16 2-3 (2004): 81-87.
    Published
  36. Ribeiro, M.C.S.; Reis, J.M.L.; Ferreira, A.J.M.; Marques, A.T.. "Thermal expansion of epoxy and polyester polymer mortars—plain mortars and fibre-reinforced mortars". Polymer Testing 22 8 (2003): 849-857. http://dx.doi.org/10.1016/s0142-9418(03)00021-7.
    Published • 10.1016/s0142-9418(03)00021-7
  37. Ribeiro, M.C.S.; Ferreira, A.J.M.; Marques, A.T.. "Analysis and Experiments on FRP-Polymer Concrete Hybrid Beams". Journal of Polymer Engineering 23 5 (2003): http://dx.doi.org/10.1515/polyeng.2003.23.5.337.
    Published • 10.1515/polyeng.2003.23.5.337
  38. Ribeiro, M.C.S.; Ferreira, A.J.M.; Marques, A.T.. "Assessment of Thermal Degradation on Polymer Mortars". Journal of Polymer Engineering 23 5 (2003): http://dx.doi.org/10.1515/polyeng.2003.23.5.299.
    Published • 10.1515/polyeng.2003.23.5.299
  39. Ribeiro, Maria Cristina Santos; Tavares, Cassilda Maria Lopes; Figueiredo, Miguel; Ferreira, António Joaquim Mendes; Fernandes, António Augusto. "Bending characteristics of resin concretes". Materials Research 6 2 (2003): 247-254. http://dx.doi.org/10.1590/s1516-14392003000200021.
    Published • 10.1590/s1516-14392003000200021
  40. Ribeiro, M.C.S.; Tavares, C.M.L.; Ferreira, António J.M.; Marques, António Torres. "Static Flexural Performance of GFRP-Polymer Concrete Hybrid Beams". Key Engineering Materials 230-232 (2002): 148-151. http://dx.doi.org/10.4028/www.scientific.net/kem.230-232.148.
    Published • 10.4028/www.scientific.net/kem.230-232.148
  41. Tavares, C.M.L.; Ribeiro, M.C.S.; Ferreira, A.J.M.; Guedes, R.M.. "Creep behaviour of FRP-reinforced polymer concrete". Composite Structures 57 1-4 (2002): 47-51. http://dx.doi.org/10.1016/s0263-8223(02)00061-2.
    Published • 10.1016/s0263-8223(02)00061-2
  42. Ribeiro, M.C.S.; Tavares, C.M.L.; Ferreira, A.J.M.. "Chemical Resistance of Epoxy and Polyester Polymer Concrete to Acids and Salts". Journal of Polymer Engineering 22 1 (2002): 27-44. http://dx.doi.org/10.1515/polyeng.2002.22.1.27.
    Published • 10.1515/polyeng.2002.22.1.27
  43. Ribeiro MCS; Ferreira, AJM; Tavares, CML. "Resistência química dos betões de resina aos ácidos e aos sais". Revista Portuguesa de Engenharia de Estruturas 49 Julho (2001): 49-54.
    Published
  44. Ribeiro MCS; Ferreira, AJM; Tavares, CML; Vieira, André. "Caracterização mecânica em flexão de betões de resina". Revista Portuguesa de Engenharia de Estruturas 48 Dezembro (2000): 71-76.
    Published
  45. Ferreira, A.J.M.; Tavares, C.; Ribeiro, C.. "Flexural Properties of Polyester Resin Concretes". Journal of Polymer Engineering 20 6 (2000): 459-468. http://dx.doi.org/10.1515/polyeng.2000.20.6.459.
    Published • 10.1515/polyeng.2000.20.6.459
Thesis / Dissertation
  1. Ribeiro MCS. "New polymer mortar formulations: Development, Characterization and Application Forms'". PhD, Universidade do Porto Faculdade de Engenharia, 2006.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2016/05/19 Potencial de Retorno: Materias Compósitos de FRP (Invited Oral Presentation) 2ª Eco Jornada do Ambiente – Retorno € do Resíduo
Instituto Politécnico do Porto, ISEP - Instituto superior de Engenharia do Porto (Porto, Portugal)
2014/03/07 Hybrid thermoset polymeric composites: An Innovation towards sustainability (Invited Oral Presentation) 12th World Pultrusion Conference
European Pultrusion Technology Association (EPTA) (Lisbon, Portugal)
2008/05/23 Durability assessment of polymer concrete materials (Plenary Session) IV Simpósio Internacional sobre Concretos Especiais - SINCO 2008
UVA -Universidade Estadual Vale do Acaraú / IBRACON -Instituto Brasileiro do Concreto / IEMAC -Instituto de Estudo dos Materiais de Construção – IBRACON / (Fortaleza, Brazil)

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2012/11 - 2016/06 Análise da segurança ao fogo de argamassas poliméricas modificadas com nano óxidos / Fire reaction analysis of polymer mortars modified with nano-oxides:
Supervisor of Susana Patrícia Bastos de Sousa
Segurança e Saúde Ocupacionais / Occupational Health and Safety (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2010 - 2012/10 Análise da Segurança de Nanocompósitos Poliméricos ao Fogo / Reaction to fire of polymeric nanocomposites
Supervisor of Susana Patrícia Bastos de Sousa
Engenharia da Segurança e Higiene Ocupacionais (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2011/08 - 2011/11 Efeito das radiações gama no comportamento mecânico de argamassas poliméricas reforçadas com fibras de lufa / Gamma radiations effect on the mechanical behavior of polymer mortars reinforced with loofah fibers
Co-supervisor of Miguel Lopez
Materials Science - Cooperation Program CONACYT (Consejo Nacional de Ciência e Tecnologia do Gobierno Federal do Mexico (Other)
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2011/08 - 2011/11 Efeito das radiações gama no comportamento mecânico de argamassas poliméricas reforçadas com fibras de reciclados de borracha de pneus / Gamma radiations effect on the mechanical behavior of polymer mortars reinforced with recycled tire fibers
Co-supervisor of Elisa Cruz
-Materials Science- under Cooperation Program CONACYT (Consejo Nacional de Ciência e Tecnologia do Gobierno Federal do Mexico); (Other)
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2008/01 - 2008/08 Natural fibres reinforced polymer concrete materials
Co-supervisor of Jordana Voght
Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2004 - 2005 Reacção ao fogo de argamassas poliméricas modificadas com agentes ignifugantes / Fire reaction of polymer mortars modified with fire retardant agents (Co-work of 2 students)
Supervisor of Sara Alexandra Lima and Maria João Angélico
Ciências de Engenharia, orientação em Engenharia Civil (Scientific initiation)
Universidade do Porto Faculdade de Engenharia, Portugal

Event organisation

Event name
Type of event (Role)
Institution / Organization
2015/07/26 - 2015/07/30 Symposium 'Recycling & Reuse of Industrial and Household Wastes into New Composite Materials', under the 6th International Conference on Mechanics and Materials in Design - M2D 2015. (2015 - 2015)
Symposium (Co-organisor)
Universidade do Porto Faculdade de Engenharia, Portugal
2011/10/21 - 2011/10/21 'Optimização da Eficiência do Processo de Pultrusão' - Seminário de encerramento do Projecto PultrEficaz/5488/005/2010 / 'Efficiency Optimization of Pultrusion Process' - Closing seminar of PultrEficaz/5488/005/2010 Project (2011/10/21 - 2011/10/21)
Seminar (Co-organisor)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
2011/06/28 - 2011/06/30 Symposium 'Concrete-Polymer Composites: Novelty Approaches', under the 16th International Conference on Composite Structures - ICCS16- (2011/06/28 - 2011/06/30)
Symposium (Co-organisor)
Universidade do Porto Faculdade de Engenharia, Portugal

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2016/07/13 Production of a New Concept of Housing Panels made with Waste Composite Systems
(Thesis) Main arguer
José Diogo Cardoso Coelho (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2016/06/23 Análise da Segurança ao fogo de argamassas poliméricas modificadas com nano-óxidos / Fire safety analysis of polymer concrete materials modified with metal oxide nanoparticles
Supervisor
Susana Patrícia Bastos de Sousa (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2014/10/28 Análise e Classificação de Indicadores de Gestão de Riscos Ocupacionais Sectoriais: Laboratórios Académicos
(Thesis) Main arguer
Carlos Emanuel Pereira Bernardo (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2014/10/28 Avaliação de Riscos Em Trabalhos de Manutenção Num Edifício do Tipo Hospitalar
(Thesis) Main arguer
Venâncio Eduardo Carvalho da Rocha (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2013/07/12 Fire safety analysis of polymer concrete materials modified with metal oxide nanoparticles (Thesis Project Proof)
Supervisor
Susana Patrícia Bastos de Sousa (Other)
Universidade do Porto Faculdade de Engenharia, Portugal
2012/10 Análise da Segurança de Nanocompósitos Poliméricos ao Fogo
Supervisor
Susana Patrícia Bastos de Sousa (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2010/12/06 Durabilidade de argamassas poliméricas de agregados leves
(Thesis) Main arguer
Alexandre Padrão Neves Alves (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2010/12/06 Estudo dos efeitos da composição e das dimensões no comportamento mecânico das argamassas poliméricas de agregados leves
(Thesis) Main arguer
Edmar Feliz Borges Martins (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Ad Hoc journal article review

Journal title (ISSN) Publisher
2011/07 - 2024/01 Construction & Building Materials (20 Articles)
2016/02 - 2023/12 Fibers (3 Articles)
2015/04 - 2022/04 Resources, Conservation & Recycling (4 Articles)
2016/08 - 2020/11 Journal of Cleaner Production (6 Articles)
2019/12 - 2020/02 Journal of Environmental Management (2 Articles)
2019/12 - 2020/02 Materials Today: Proceedings (4 Articles)
2015/02 - 2019/09 Materials&Design (4 Articles)
2016/01 - 2019/03 Advances in Materials Science and Engineering (5 Articles)
2016/03 - 2018/12 Recycling (8 Articles)
2018/10 - 2018/11 Journal of Composite Science (2 Articles)
2018/09 - 2018/11 Journal of Mechanical Engineering Science (2 Articles)
2018/07 - 2018/11 Journal of Natural Fibers (4 Articles)
2009/07 - 2018/07 Composite Structures (12 Articles)
2014/12 - 2018/05 Composites - Part A (9 Articles)
2017/04 - 2018/04 Advances in Concrete Construction (4 Articles)
2018/02 - 2018/02 Advances in Civil Engineering (1 Article)
2017/05 - 2018/02 Polymer Composites (4 Articles)
2014/04 - 2018/02 Polymers (6 Articles)
2017/03 - 2017/03 Journal of Material Cycles and Waste Management (1 Article)
2016/11 - 2017/01 International Journal of Polymer Science (2 Articles)
2016/10 - 2016/10 Environmental Engineering Science (1 Article)
2016/06 - 2016/06 Particulate Science and Engineering (1 Article)
2016/06 - 2016/06 The Open Journal in Civil Engineering (1 Article)
2014/11 - 2016/06 Journal of Hazardous Materials (2 Articles)
2016/05 - 2016/05 Journal of Residuals Science & Technology (1 Article)
2016/02 - 2016/03 Royal Society of Chemistry Advances (2 Articles)
2011/10 - 2015/11 International Journal of Environmental Technology (3 Articles)
2015/08 - 2015/08 Progress in Color, Colorants and Coatings (1 Article)
2015/07 - 2015/07 Journal of Polymer Engineering (1 Article)
2014/10 - 2014/10 Materials Research Innovations (1 Article)
2014/10 - 2014/10 Open Engineering Science Journal (1 Article)
2014/09 - 2014/09 Journal of Composite Materials (1 Article)
2014/08 - 2014/08 Environment Protection Engineering (1 Article)
2008/07 - 2014/07 Materials Research (4 Articles)
2008/10 - 2014/05 Journal of Applied Polymer Science (14 Articles)
2014/03 - 2014/03 Composite Science and Technology (1 Article)
2014/03 - 2014/03 Journal of Petroleum & Environmental Biotechnology (1 Article)
2013/09 - 2014/02 International Journal of Materials Engineering Innovation (2 Articles)
2013/12 - 2013/12 Environmental Engineering and Management Journal (1), Dez 2013
2010/03 - 2013/12 Composites - Part B (4 Articles)
2012/03 - 2012/05 Journal of Reinforced Plastics and Composites (2 Articles)
2010/10 - 2012/04 Cold Regions Science and Technology (3 Articles)
2012/02 - 2012/02 Structural Engineering and Mechanics (1 Article)
2010/12 - 2010/12 International Journal of Sustainable Engineering (1 Article)
2010/01 - 2010/01 Engineering of Fracture Mechanics (1 Article)
2009/04 - 2009/08 Journal of Materials in Civil Engineering –ASCE- (2 Articles)
2009/05 - 2009/05 Journal of Polymer Research (1 Article)
2009/05 - 2009/05 Materials Science Forum (1 Article)
2008/02 - 2008/02 Advanced Materials Forum (1 Article) Trans Tech Publications

Association member

Society Organization name Role
2020 - Current CERENA - Centro de Recursos Naturais e Ambiente / Natural Resources and Environment Research Center Researcher
2008/05/16 - Current LAETA - Grupo de Investigação do Laboratório Associado em Energia, Transportes e Aeronáutica / Associated Laboratory for Energy, Transports and Aeronautics Researcher
2010/12/31 - 2018 CIGAR - Centro de Investigação em Geo-Ambiente e Recursos / Geo-Environmental and Resources Research Center Collaborate member - Researcher

Committee member

Activity description
Role
Institution / Organization
2023/02/15 - 2023/06/30 Council member of Mine Engineering Department of Faculty of Engineering of University of Porto
Member
Universidade do Porto Faculdade de Engenharia, Portugal

Conference scientific committee

Conference name Conference host
2015/07/26 - 2015/07/30 6th International Conference on Mechanics and Materials in Design - M2D 2015, Azores, Portugal S. Miguel, Açores, Portugal
2014/12/10 - 2014/12/20 International Conference on Polymer Composites, Surathkal, India National Institute of Technology Karnataka,
2013/06/12 - 2013/06/14 1º Encontro Luso-Brasileiro de Engenharia de Compósitos, under '17th International Conference on Composite Structures - ICCS17, Porto, Portugal Universidade do Porto, Faculadade de Engenharia
2011/07/24 - 2011/07/30 19th Annual Conference on Composites or Nano Engineering - ICCE 19, Shanghai, China. Sahangai, China
2011/06/28 - 2011/06/30 16th International Conference on Composite Structures - ICCS 16, Porto, Portugal Faculty of Engineering of University of Porto
2010/09/06 - 2010/09/08 1º Encontro Nacional de Materiais e Estruturas Compósitas - ENMEC 2010, Porto, Portugal Faculty of Engineering of University of Porto
2009/06/15 - 2009/06/17 15th International Conference on Composite Structures - ICCS 15, Porto, Portugal Faculty of Engineering of University of Porto
2007/04/01 - 2007/04/04 IV International Materials Symposium, MATERIALS 2007, Porto, Portugal Porto, Portugal

Consulting

Activity description Institution / Organization
2009 - 2009 Structural stability analysis of homogenizing tank of sewage treatment plant of Ecobarcelos - Tratamento de Efluentes Ace (Inspection and Technical advice) Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2008 - 2008 Technical Report: Potential branch market for precast concrete polymer composite based products TechPitch - Tecnologia e Inovação, Portugal

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2020 - 2021 Materiais na Engenharia Civil / Civil Engineering - Materials Engenharia Civil (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2007 - 2020 Construção com Novos Materiais / Construction with New Materials Ciências de Engenharia, orientação em Engenharia Civil (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2005 - 2006 Novos Materiais de Construção / New Construction Materials Ciências de Engenharia, orientação em Engenharia Civil (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2005/11 - 2005/11 Compósitos Betão-Polímero / Concrete Polymer Composites Certificação Ambiental - Instrumento para alcançar um desenvolvimento sustentável (Curso Técnico Superior Profissional) Universidade de Aveiro Associação para a Formação Profissional e Investigação, Portugal
2005 - 2005 Novos Materiais / New Materials Estruturas de Engenharia Civil (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2004 - 2004 Materiais e Processos de Construção / Construction Materials and Processes Engenharia Civil (Licenciatura) Universidade do Porto Faculdade de Engenharia, Portugal

Journal scientific committee

Journal title (ISSN) Publisher
2017/07 - Current International Journal of Materials Science and Applications (2327-2635) Science Publishing Group
2017/05 - Current Journal of Waste Recycling (prior title: Resources, Recycling and Waste Management) Insight Medical Publishing
Distinctions

Other distinction

2014 Merit of Scientific Publication / Mérito de Publicação Científica
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 Merit of Scientific Publication / Mérito de Publicação Científica
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal