???global.info.a_carregar???
I am Associate Professor at the Faculty of Architecture and Urbanism of the University of São Paulo (FAUUSP), where I founded and coordinated the digital manufacturing laboratory FAB LAB SP and the Research Group DIGI-FAB - Digital manufacturing technologies applied to the production of Contemporary Design and Architecture. I was the coordinator of the Design and Architecture Area at the FAUUSP Post-Graduation Program. Visiting professor at the Department of Architecture of the University of Coimbra, Portugal, with a Post-Doctoral fellowship (BPE) granted by FAPESP (2018-2019). Visiting researcher at the School of Architecture, Planning and Landscape of Newcastle University, in the United Kingdom, where I developed a Post-Doctorate with a Post-Doctoral fellowship (BPE) granted by FAPESP (2014-2015). I hold a degree in Architecture and Urbanism from the Pontifical Catholic University of Campinas (1981). I obtained a Master degree in Civil and Urban Construction Engineering from the Polytechnic School of the University of São Paulo (1989). My PhD degree is in Architecture and Urbanism from the University of São Paulo (2002). Since 2016 I am Associate Professor in undergraduate and graduate courses at FAUUSP. I coordinated the FAUUSP Design Course (2011-2013). Other activities: superintendent of the Brazilian Committee on Civil Construction (CB-02) of the Brazilian Association of Technical Standards (ABNT) (2012-2015). I worked in the Brazilian Quality and Productivity Habitat Program (PBQP-H) of the Ministry of Cities, where I was a full member of the National Committee for Technological Development of Housing (CTECH). I was Technical Director of ABCIC-Brazilian Association of Industrialized Concrete Construction (Biennium 2003-2004). International Housing Technology Consultant of UNDP-United Nations Development Program (2006). International coordinator of the MicroCAD Research Project of the Ibero-American Cooperation Programme CYTED (2008-2013). Corresponding member of the Prefabrication Working Group of FIB-Fédération Internationale du Béton. I have experience in the area of Architecture and Urbanism, with an emphasis on industrialized building systems, acting mainly on the following themes: prefabricated buildings, housing, high-performance concrete, digital fabrication, urbanization and sanitation.
Read full resume ↓
Identification

Personal identification

Full name
Paulo Eduardo Fonseca de Campos

Citation names

  • Fonseca de Campos, Paulo
  • Fonseca de Campos, Paulo E.

Author identifiers

Ciência ID
4A1B-FE61-C719
ORCID iD
0000-0001-9132-3072
Google Scholar ID
https://scholar.google.com/citations?hl=en&user=Z4yvT5cAAAAJ

Knowledge fields

  • Humanities - Arts - Architectural design
  • Engineering and Technology - Civil Engineering - Architecture Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
Spanish; Castilian Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2016/01/02 - 2016/08
Concluded
 Associate Professor (Outros)
Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, Brazil
2014/09/01 - 2015/03/01
Concluded
 Post-Doctorate - School of Architecture, Planning and Landscape at Newcastle University (Pós-doutoramento)
Newcastle University School of Architecture Planning and Landscape, United Kingdom
1997/03/01 - 2002/08/12
Concluded
 Doctorate in Architecture and Urbanism (Doctor of Philosophy)
Universidade de São Paulo, Brazil
"From reinforced mortar to high-performance microconcrete: perspectives of development for lightweight prefabrication" (THESIS/DISSERTATION)
1984/03/01 - 1989/12/10
Concluded
 Graduate degree (MSc) in Civil Construction and Urban Engineering (Master)
Universidade de São Paulo, Brazil
"Building industrialization and reinforced mortar; perspectives of development" (THESIS/DISSERTATION)
1977/01/02 - 1981/12/20
Concluded
 Faculdade de Arquitetura e Urbanismo (Bachelor)
Pontifícia Universidade Católica de Campinas, Brazil
Affiliation

Science

Category
Host institution 		Employer
2011/12/10 - 2018/10/10 Science and Technology Management Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, Brazil

Teaching in Higher Education

Category
Host institution 		Employer
2008/03/01 - Current Associate Professor (University Teacher) Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, Brazil

Positions / Appointments

Category
Host institution 		Employer
2016/06/01 - Current Vice Head of the Design Department Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, Brazil
1994 - 1996 Municipal Secretary responsible for the Administration of the Northwest Zone of Santos and coordinator of the housing program in the period from 1994 to 1996 Prefeitura Municipal de Santos, Brazil
Prefeitura Municipal de Santos, Brazil

Others

Category
Host institution 		Employer
1989 - 1992 Chief of the Technology Department of CEDEC - Development Centre for Urban and Community Equipment - the Municipal Company of Urbanization of São Paulo (EMURB) The Municipal Company of Urbanization of São Paulo (EMURB), Brazil
The Municipal Company of Urbanization of São Paulo (EMURB), Brazil
Projects

Grant

Designation Funders
2018/09/09 - 2019/03/08 Sensitive mediations of inhabiting the city: participatory architecture and the echoes of the SAAL- Local Ambulatory Support Service (Portugal, 1975 - 1976)
2018/11546-8
Post-doc Fellow
Universidade de Coimbra Departamento de Arquitectura, Portugal
 Fundação de Amparo à Pesquisa do Estado de São Paulo
Concluded
2018/09 - 2019/03 Sensitive mediations of inhabiting the city: participatory architecture and the echoes of the SAAL- Local Ambulatory Support Service (Portugal, 1975 - 1976)
2018/11546-8
 Fundação de Amparo à Pesquisa do Estado de São Paulo
2014/09/01 - 2015/03/01 The User as protagonist and agent of design: from the Uruguayan housing cooperatives to the Byker Wall of Newcastle
2014/06102-2
Post-doc Fellow
Newcastle University School of Architecture Planning and Landscape, United Kingdom
 Fundação de Amparo à Pesquisa do Estado de São Paulo
Concluded
2014/09 - 2015/03 The User as protagonist and agent of design: from the Uruguayan housing cooperatives to the Byker Wall of Newcastle
2014/06102-2
 Fundação de Amparo à Pesquisa do Estado de São Paulo

Contract

Designation Funders
2013/07/01 - 2015/11/30 Robotic technologies for non-standard design and construction in architecture
PTDC/ATP- AQI/5124/2012
Invited Scientist Fellow
Universidade do Porto Faculdade de Arquitectura, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
2008/03/01 - 2013/09/10 High-performance micro-concrete for the lightweight prefabrication development
490003/2008-7
Supervisor
Ciencia y Tecnología para el Desarrollo, Spain

Conselho Nacional de Desenvolvimento Científico e Tecnológico, Brazil
Conselho Nacional de Desenvolvimento Científico e Tecnológico
Outputs

Publications

Book
  1. Faculdade de Engenharia; Faculdade de Arquitectura; Martins, Pedro Filipe; Campos, Paulo Fonsecade; Nunes, Sandra; Sousa, Jose Pedro. Expanding the material possibilities of lightweight prefabrication in concrete through robotic hot-wire cutting - form, texture and composition. 2015.
  2. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo. Industrialized production: applications and manufacturing process with welded mesh. 1994.
Book chapter
  1. Fonseca de Campos, Paulo E.. "A Robotic Production of GRC Panels". 155-157. 2015.
Conference paper
  1. Soares, Juliana Maria Moreira; Fonseca de Campos, Paulo. "Printable Assistive Technologies in online repositories: aspects regarding projects based on three-dimensional printing in this context". Paper presented in 7th Meeting of Research in Music, Arts and Design, EIMAD 2020, Castelo Branco, 2020.
    Published
  2. BACKHEUSER, Luiz Alberto Fresl; FONSECA DE CAMPOS, Paulo Eduardo. "ALGORITMO PARTICIPATIVO E FABRICAÇÃO DIGITAL: FERRAMENTA DIGITAL PARA ADEQUAÇÃO ARQUITETÔNICA/PARTICIPATIVE ALGORITHM AND DIGITAL MANUFACTURING: DIGITAL TOOL FOR ARCHITECTURAL FITNESS". Paper presented in VI SIMPOSIO BRASILEIRO DE QUALIDADE DO PROJETO NO AMBIENTE CONSTRUIDO, Uberlândia, 2019.
    Published • 10.14393/sbqp19004
  3. Martins, Pedro Filipe; Nunes, Sandra; Campos, Paulo Fonseca de; Sousa, José Pedro. "RETHINKING THE PHILIPS PAVILION THROUGH ROBOTIC HOT WIRE CUTTING. An experimental prototype". Paper presented in eCAADe + SIGraDi 2019 Conference, Porto, 2019.
    Published • 10.5151/proceedings-ecaadesigradi2019_660
  4. Fonseca de Campos, Paulo. "The user as a protagonist and project agent: from Uruguayan housing cooperatives to Newcastle's "Byker Wall"". Paper presented in 4th CIHEL – International Congress of Housing on Lusophone Space, 2017.
  5. Gaspar, Natália; Taralli, Cibele; Fonseca de Campos, Paulo E; Barbosa, Lara; Salata, Robinson. "An architect, a building and its constructive system". 2016.
  6. Garcia, Alex; Henno, Juliana; Fonseca de Campos, Paulo; Fleury, André Leme. "Design and digital manufacturing concepts applied to a digital inclusion program for young people in the outskirts of Guarulhos, in Brazil". 2015.
  7. Fonseca de Campos, Paulo E; Lara, Arthur H; Magri, Paulo HG. "Digitally manufactures a purposeful study for furniture with medium density wood fiber boards (MDF)". 2013.
  8. Garcia, Alex; Henno, Juliana; Fonseca de Campos, Paulo E. "Fab Social Project: introduction to programming in a free course applied on the outskirts of Guarulhos". 2013.
  9. Angelo, Alex; Neves, Heloisa; de Campos, Paulo Eduardo Fonseca. "Fab Lab Kids: Oficina de projetos socioambientais para crianças de escolas públicas fazendo uso da eletrônica e da fabricação digital[Fab Lab Kids: Workshop for environmental projects public school children making use of electronics and digital fabrication]". 2012.
  10. Gaspar, Natália M; Fonseca de Campos, Paulo E. "O Banheiro, a cozinha e a lavanderia na produção da habitação: unidade hidráulica para reabilitação de edifícios". 2012.
  11. Fonseca de Campos, Paulo E; Fonseca de Campos, Paulo. "Technologies for the construction of social habitat; the contribution of the high performance microconcrete to the development of lightweight prefabrication". 2011.
  12. Fonseca de Campos, Paulo E. "Urban improvements, technological alternatives and citizenship". 2006.
  13. Fonseca de Campos, Paulo E. "High-performance microconcrete: a contribution to the development of lightweight prefabrication". 2005.
  14. Fonseca de Campos, Paulo E. "Technology: for what and for whom?". 2001.
  15. Fonseca de Campos, Paulo E. "Da argamassa armada ao microconcreto de alto desempenho: um estudo de elementos pré-fabricados delgados". 2000.
  16. Fonseca de Campos, Paulo E. "Rural housing in Brazil and Technology: quantitative deficit and qualitative deficiencies". 1999.
  17. Fonseca de Campos, Paulo E. "Tecnologias para vencer os desafios da escassez". 1998.
  18. YAMAGUTI, Alexander S; KENCHIAN, Alexandre; Fonseca de Campos, Paulo E. "Pré-fabricação por Ajuda-Mútua I Prefabrication by Mutual-Aid". 1993.
  19. Hanai, JB; Ballarin, AW; Campos, PEF. "Prefabricated construction systems designed by architect João Filgueiras Lima". 1988.
Journal article
  1. Yamana, Daniella Naomi; Medeiros, Jady; Lopes, Eduardo Ignacio; Fonseca de Campos, Paulo Eduardo. "Calçadas Drenantes: intervenções físicas com desenvolvimento social/Draining sidewalks: physical interventions with social development". Gestão & Tecnologia de Projetos 14 1 (2019): 9-24. http://dx.doi.org/10.11606/gtp.v14i1.147900.
    Open access • Published • 10.11606/gtp.v14i1.147900
  2. Fonseca de Campos, Paulo Eduardo; Dias, Henrique José dos Santos. "A insustentável neutralidade da tecnologia: o dilema do Movimento Maker e dos Fab Labs | The unsustainable neutrality of technology: the dilemma of Maker Movement and Fab Labs". (2018): http://revista.ibict.br/liinc/article/view/4152.
  3. Fonseca de Campos, Paulo; Lopes, Eduardo I.. "Digital manufacturing applied to industrialized construction: state of the art and development perspectives". Concrete & Construction Journal 85 XLIV (2017): 22-29.
    Open access • Published
  4. Fonseca de Campos, Paulo. "A fabricação digital aplicada à construção industrializada: estado da arte e perspectivas de desenvolvimento". Revista Concreto & Contrução 43 nº 85 (2017): p. 54 – 61-p. 54 – 61.
  5. Garcia, Alex; Henno, Juliana; Fleury, Andre´; Alex Garcia; Juliana Henno; Paulo Eduardo Fonseca Campos; Andre´ Fleury. "Approach of design and fabrication concepts in a digital inclusion learning environment". DATJournal Design Art and Technology 1 2 (2016): 51-61. https://doi.org/10.29147/2526-1789.DAT.2016v1i2p51-61.
    10.29147/2526-1789.DAT.2016v1i2p51-61
  6. Fonseca de Campos, Paulo E. "Review of architectural technical standards: a fundamental step towards consolidating the Building Performance Standard". Revista Concreto & Contrução 42 (2014): p.39-40.
  7. Fonseca de Campos, Paulo E. "Design da embalagem". 1º Seminário do Curso de Design da FAUUSP, 2008 - Design: Quo Vadis? 1 1 (2011): p.171 – 176-p.171 – 176.
  8. Fonseca de Campos, Paulo E. "Technologies to overcome the challenges of scarcity". Tercer Seminario Foro Internacional; Tecnologías Sostenibles para el Hábitat en América Latina 1 1 (2008):
  9. Fonseca de Campos, Paulo E. "Civil construction: Without technological restrictions, prefabricated buildings must break cultural barriers". Revista Painel 11 nº 163 (2008): p.10-11.
  10. Fonseca de Campos, Paulo E. "Prefabricated panels require a new design focus". Anuário da Construção 3 3 (2006):
  11. CAMPOS, Paulo Eduardo Fonseca de; CAMPOS, PE. "Sem restrições tecnológicas os pré-fabricados devem romper obstáculos culturais". Texto extraído da página do Prof. Luis Fernando de Ávila Santos (2006):
  12. Fonseca de Campos, Paulo E. "New paradigms of the open cycle: components with added value". Revista Obras On Line 2 15 (2005):
  13. Fonseca de Campos, Paulo E. "Pré-fabricados". Revista Obras On Line 2 13 (2005):
  14. Fonseca de Campos, Paulo E. "MICROCONCRETO DE ALTO DESEMPENHO: Uma Contribuição para o Desenvolvimento da Pré-fabricação Leve". (2005):
  15. Fonseca de Campos, Paulo E. "Technology: urban improvements and better habitat". Vivienda Popular 14 (2004):
  16. Serra, GG; de Campos, PEF. "Precast High Performance Concrete". Special Publication 207 (2002): 327-338.
  17. Fonseca de Campos, Paulo E; Tango, Carlos E de S. "From reinforced mortar to high-performance microconcrete; a study of thin wall prefabricated elements". Téchne 54 (2001):
  18. CYTED, GILL NESSI. "El hábitat ibero-americano en la mira I The Ibero-American habitat in focus". (1999):
  19. Serra, Geraldo G.; Fonseca de Campos, Paulo E.. "Prefabricated, concrete and architecture; the objectives of research in architecture technology". Directorios de integración de mercados (1999):
  20. Fonseca de Campos, Paulo E. "Tecnologia: para que e para quem?". Téchne 43 (1999):
  21. Campos, Paulo Eduardo F; Hanai, JB. "Building Industrialization and reinforced mortar: prospects for development". São Paulo, Departamento de Construção Civil da Escola Politécnica da Universidade de São Paulo, EPUSP (1989):
Magazine article
  1. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo. "Fablab SP Laboratory inspires growth of the digital manufacturing network in Brazil [Interview to Laura H. Capelhuchnik]", 2016
Thesis / Dissertation
  1. Fonseca de Campos, Paulo. "ConcreSystem". Degree, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2020.
  2. Fonseca de Campos, Paulo. "Desenvolvimento de uma chuteira para o futebol profissional feminino com enfoque em prevenir lesões de tornozelo / Development of professional soccer cleats for women with a focus on preventing ankle injuries". Degree, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2020.
  3. Fonseca de Campos, Paulo. "A CASA DO PESQUISADOR: Base de apoio à pesquisa de campo em Unidades de Conservação / THE RESEARCHER'S HOUSE: Support base for field research in Conservation Units". Degree, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2020.
  4. Fonseca de Campos, Paulo. "CONCRETO DIGITAL: novas possibilidades de materialização na arquitetura contemporânea / DIGITAL CONCRETE: new possibilities for materialization in contemporary architecture". PhD, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2020.
  5. Fonseca de Campos, Paulo. "O Desenho Urbano e a Habitação no Centro Expandido da Cidade de São Paulo / Urban Design and Housing in the Expanded Center of the City of São Paulo". PhD, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2020.
  6. Fonseca de Campos, Paulo. "Algoritimos participativos: uma ferramenta computacional de produtividade / Participatory algorithms: a computational productivity tool". PhD, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2020.
  7. Barone, Edison. "Escritório forma função: design como instrumento de soberania e desenvolvimento/Form-Function Office: design as an instrument of sovereignty and development". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2019. http://dx.doi.org/10.11606/d.16.2020.tde-19122019-114827.
    10.11606/d.16.2020.tde-19122019-114827
  8. Amaral, Laura Regina. "As casas de Oswaldo Arthur Bratke: uma análise gráfica da obra/Oswaldo Arthur Bratke's houses: a graphic analysis of the work". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2019. http://dx.doi.org/10.11606/d.16.2019.tde-26112019-154721.
    10.11606/d.16.2019.tde-26112019-154721
  9. Souto, Ivan Custódio dos Santos. "Navegando na cidade intangível. Representação da informação urbana em ambientes virtuais / Navigating the intangible city. Representation of urban information in virtual environments". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2017. http://dx.doi.org/10.11606/d.16.2018.tde-18122017-145450.
    10.11606/d.16.2018.tde-18122017-145450
  10. Silva, Jose Augusto Marinho. "O design de calçados na (re)evolução digital. Proposta de uma metodologia para análise de desempenho de calçados femininos com foco no conforto do usuário, utilizando a modelagem virtual e a impressão 3D / The design of footwear in (digital) evolution. Proposal of a methodology for analyzing the performance of women's shoes focused on user comfort, using virtual modeling and 3D printing". PhD, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2016. http://dx.doi.org/10.11606/t.16.2017.tde-16122016-170644.
    10.11606/t.16.2017.tde-16122016-170644
  11. Gaspar, Natalia Maria. "O debate sobre a industrialização da arquitetura na FAUUSP durante as décadas de 1950 e 1960 / The debate over the industrialization of architecture at FAUUSP during the 1950s and 1960s". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2016. http://dx.doi.org/10.11606/d.16.2017.tde-20122016-150512.
    10.11606/d.16.2017.tde-20122016-150512
  12. Moraes, Rodrigo Agostini de. "ABC da arquitetura. Fundamentos conceituais para uma gramática de projeto / ABC of architecture. Conceptual Fundamentals for a Project Grammar". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2016. http://dx.doi.org/10.11606/d.16.2017.tde-16022017-105213.
    10.11606/d.16.2017.tde-16022017-105213
  13. Angelo, Alex Garcia Smith. "Considerações sobre um campo conceitual comum entre a formação básica escolar, projeto e as tecnologias digitais de modelagem e fabricação / Considerations about a common conceptual field among basic school education, design and digital modeling and manufacturing technologies". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2015. http://dx.doi.org/10.11606/d.16.2016.tde-07032016-155459.
    10.11606/d.16.2016.tde-07032016-155459
  14. Neves, Heloisa Maria Domingues. "Maker innovation; Do open design e fab labs... às estratégias inspiradas no movimento maker / Maker Innovation; From Open Design and FabLabs ... to the strategies inspired by the Maker Movement". PhD, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2014. http://dx.doi.org/10.11606/t.16.2014.tde-14072015-112909.
    10.11606/t.16.2014.tde-14072015-112909
  15. Monteiro, Marcelo. "O design, a interação com o marketing e a conjuntura socioeconômica, cultural e ambiental / Design and interaction with marketing and conjuncture socioeconomic, cultural and environmental". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2014. http://dx.doi.org/10.11606/d.16.2014.tde-29072014-102716.
    10.11606/d.16.2014.tde-29072014-102716
  16. Zompero, Eric Fernando Teixeira. "Produção industrial de refeições em cozinhas profissionais: um estudo dos equipamentos tradicionais e digitais sob o ponto de vista da ergonomia cognitiva / Industrial food production in professional kitchens: a study of traditional and digital equipments from cognitive ergonomics". Master, Universidade de São Paulo Faculdade de Arquitetura e Urbanismo, 2014. http://dx.doi.org/10.11606/d.16.2014.tde-07072014-150706.
    10.11606/d.16.2014.tde-07072014-150706

Other

Other output
  1. Tecnologias para a construção do habitat social o microconcreto de alto desempenho para o desenvolvimento da pré-fabricação leve. 2017. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  2. Tecnologias para a construção do habitat social o microconcreto de alto desempenho para o desenvolvimento da pré-fabricação leve. 2017. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  3. Architectural Design: A design approach focused on the user, as protagonist and project agent, or ... From Uruguayan housing cooperatives to the modernist dissent of Byker Wall. 2016. Fonseca de Campos, Paulo E.
  4. The Footwear Design in the Digital (Re)Evolution' It’s the proposal of a methodology for performance analysis of women's footwear focused on user comfort, using virtual modeling and 3D printing. The women's high heels shoes design has features of project focused on styling rather than the user, since the aesthetic overcomes comfort issues. In this present research, a methodological approach has been developed, focused on the best adaptation to the user ´s foot on the Tailor- made characteristics, manly on comfort.. 2016. José Augusto Marinho, Silva.
  5. Informational layers of the urban space: non-linear readings of the complex city. 2016. Ivan Custódio dos Santos, Souto; Souto, Ivan Custódio dos Santos.
  6. Fab Labs democratizam tecnologias avançadas. [Depoimento a Bianca Bellucci]. 2016. Cláudia, Bär; Bär, Cláudia.
  7. Laboratório Fablab SP inspira crescimento da rede de fabricação digital no Brasil. [Depoimento a Laura H. Capelhuchnik]. 2016. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  8. Memorial circunstanciado. 2016. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  9. Design arquitetônico uma abordagem projetual com foco no usuário, como protagonista e agente de projeto, ou... Das cooperativas de habitação uruguauias ao disseno modernista do "Byker Wall". 2016. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  10. Memorial circunstanciado. 2016. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  11. O debate sobre a industrialização da arquitetura na FAUUSP durante as décadas de 1950 e 1960. 2016. Natália Maria, Gaspar; Gaspar, Natália Maria.
  12. O design de calçados na (re)evolução digital. Proposta de uma metodologia para análise de desempenho de calçados femininos com foco no conforto do usuário, utilizando a modelagem virtual e a impressão 3D. 2016. José Augusto Marinho, Silva; Silva, José Augusto Marinho.
  13. Considerations on a common conceptual field between school basic training, design and digital modeling and manufacturing technologies. 2015. Alex Garcia Smith, Angelo; Angelo, Alex Garcia Smith.
  14. Não são todos os trabalhos finais de graduação... [Prefácio]. 2015. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  15. Perspectivas de desempenho. [Entrevista]. 2015. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  16. Não são todos os trabalhos finais de graduação... [Prefácio]. 2015. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  17. Industrial food production in professional kitchens: a study of traditional and digital equipments from cognitive ergonomics. 2014. Eric Fernando Teixeira, Zompero; Zompero, Eric Fernando Teixeira.
  18. Design and interaction with marketing and conjuncture socio-economic, cultural and environmental. 2014. Marcelo, Monteiro; Monteiro, Marcelo; Marcelo Monteiro. http://www.teses.usp.br/teses/disponiveis/16/16134/tde-29072014-102716/.
  19. Maker innovation. From open design and fab labs ... to strategies inspired by the maker movement. 2014. Heloisa Maria Domingues, Neves; Neves, Heloisa Maria Domingues.
  20. From reinforced mortar to high-performance microconcrete. 2014. Fonseca de Campos, Paulo E..
  21. High performance microconcrete: MicroCAD technology applied in social habitat construction. 2013. Fonseca de Campos, Paulo E.; al., et; Fonseca de Campos, Paulo Eduardo.
  22. Building performance standard: a contribution to the development of the concept of demanding standards applied to civil construction. 2013. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  23. Siempre que me refiero... [Apresentação]. 2013. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  24. Fabrica digital um estudo propositivo para movelaria com placas de fibras de madeira de média densidade (MDF). 2013. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  25. Incentivo e qualidade. [Entrevista a Gisele C. Cichinelli]. 2013. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  26. The bathroom, the kitchen and the laundry in the production of the housing hydraulic unit for rehabilitation of buildings. 2º Congresso Internacional: Sustentabilidade e Habitação de Interesse Social CHIS 2012. 2012. Natália Maria, Gaspar; Gaspar, Natália Maria; Fonseca de Campos, Paulo Eduardo.
  27. Packaging design: for what and for whom?. 2011. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  28. Prefabrication for affordable housing. 2011. Fernández-Órdoñez, David; al., et.
  29. Espaço lúdico de morar a interação entre o morador e o processo construtivo. 2011. Camila Motoike, Paim; Paim, Camila Motoike.
  30. Suprindo uma necessidade emergencial de moradia a habitação pode ser desmontada e remontada no futuro. 2011. Guilherme, A. Mejias; Mejias, Guilherme A..
  31. Prontas para obra. [Depoimento a Simone Sayech]. 2011. Sidônio, Porto; Porto, Sidônio.
  32. A disciplina AUP448. 2011. Cibele Haddad, Taralli; Taralli, Cibele Haddad.
  33. High-performance microconcrete for the development of lightweight prefabrication. 2010. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  34. MicroCAD microstructure and mix design. 2010. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  35. MicroCAD technologies for building social habitat. 2010. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  36. Tecnologia construtiva desenvolvida em laboratórios da FAU dá suporte a programas governamentais. [Depoimento a Luiza Caires]. 2010. Cibele Haddad, Taralli; Taralli, Cibele Haddad.
  37. O criador dos prédios espetaculares. [Depoimento a Marcelo Bortoloti e Silva Rogar]. 2010. Santiago, Calatrava; Calatrava, Santiago.
  38. Microconcreto de alto desempenho para o desenvolvimento da pré-fabricação leve. 2010. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  39. Arquitetura inclusiva. [Depoimento a Silvana Maria Rosso]. 2009. Silvana Serafino, Cambiaghi; Cambiaghi, Silvana Serafino.
  40. Habitação econômica. [Debate/Depoimento]. 2009. Carlos Alberto, Tauil; Tauil, Carlos Alberto.
  41. Pré-fabricação a limpo [Depoimento a Simone Sayegh]. 2005. Roberto, Inaba; Inaba, Roberto.
  42. From reinforced mortar to high-performance microconcrete: development prospects for lightweight prefabrication. 2002. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  43. Da argamassa armada ao microconcreto de alto desempenho perspectivas de desenvolvimento para a pré-fabricação leve. 2002. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
  44. Mejor hábitat y ciudad para todos I Best habitat and city for everyone. 2001. Fonseca de Campos, Paulo E.; al., et.
  45. Towards a diagnosis of popular housing in Latin America. 1999. Sepúlveda O., Rubén; al., et.
  46. Reinforced mortar; industrialized production with welded mesh. 1995. Fonseca de Campos, Paulo E..
  47. Industrializacao da construcao e argamassa armada perspectivas de desenvolvimento. 1991. Paulo Eduardo Fonseca de, Campos; Fonseca de Campos, Paulo Eduardo.
Activities

Association member

Society Organization name Role
2012 - 2015 Elected Superintendent of ABNT / CB-02 - Brazilian Committee on Civil Construction of the Brazilian Association of Technical Standards – from April / 2012 to October / 2015 Superintendent of ABNT / CB-02 - Brazilian Committee on Civil Construction of the Brazilian Association of Technical Standards
2003 - 2004 Technical Director of ABCIC - Brazilian Association of Industrialized Concrete Building - Biennium 2003-2004 Technical Director of ABCIC - Brazilian Association of Industrialized Concrete Building - Biennium 2003-2004

Committee member

Activity description
Role 		Institution / Organization
2007 - 2015 Ministry of Cities of Brazil - Full member of the National Committee for Technological Development for Housing (CTECH) – from 2007 to October / 2015
Member
 Ministry of Cities of Brazil , Brazil
2008 - 2013 International coordinator of the Project “High performance micro-concrete for the development of lightweight prefabrication (MicroCAD)” in the Ibero-American Programme on Science and Technology for Development (CYTED) / CNPq – from 2008 to 2013
Coordinator
 Ciencia y Tecnología para el Desarrollo, Spain
2004 - 2007 Corresponding member of the “Affordable house” Working Group on Prefabrication of FIB-Fédération Internationale du Béton (Switzerland) – from 2004 to 2007
Member
 Fédération Internationale du Béton (FIB), Switzerland

Conference scientific committee

Conference name Conference host
2019 - 2020 16th Participatory Design Conference PDC2020: “Participation(s) otherwise” Caldas University - Manizales, Colombia
2019 - 2019 eCAADe + SIGraDi conference “Architecture in the age of the 4th Industrial Revolution” Faculty of Architecture of Porto University
2018 - 2018 XXII International Conference of Sociedad Iberoamericana de Gráfica Digital Architecture and Urbanism Institute – University of São Paulo/São Carlos
2017 - 2017 XXI International Conference of Sociedad Iberoamericana de Gráfica Digital Universidad de Bio Bio, Concepción, Chile
2015 - 2015 Future Traditions Conference - 1st eCAADe Regional International Workshop Faculty of Architecture at Porto University
2015 - 2015 Robot 2015: Robotic Applications in Art and Architecture Faculty of Architecture at Porto University

Consulting

Activity description Institution / Organization
2014 - 2015 International consultant for the project “Robotic technology for non-standard design and construction in architecture” funded by FCT - Foundation for Science and Technology of Portugal Universidade do Porto Centro de Estudos de Arquitectura e Urbanismo, Portugal
2006 - 2007 UNDP International Housing Technology Consultant - United Nations Development Programme – from 2006 to 2007 Ministerio de Vivienda Ordenamiento Territorial y Medio Ambiente, Uruguay
Distinctions

Award

2010 IDEA-International Design Excellence Award / Brazil SILVER for the supervision of student project of Natália Maria Gaspar - IDSA – Industrial Designers Society of America / Objeto Brazilian Association
Objeto Brazilian Association, Brazil

IDSA – Industrial Designers Society of America, United States

Other distinction

2019 Honorable mentions for participation as judge in the Work of the Year Award in Prefabricated Concrete from the Brazilian Association of Industrialized Concrete Building (ABCIC) - 6th Edition/2016 - 7th Edition/2017 - 8th Edition/2018 - 9th Edition/2019
Brazilian Association of Industrialized Concrete Building (ABCIC) , Brazil
2015 Honorable mentions for participation as judge in the Work of the Year Award in Prefabricated Concrete from the Brazilian Association of Industrialized Concrete Building (ABCIC) - 3rd Edition / 2013 - 4th Edition / 2014 - 5th Edition / 2015
Brazilian Association of Industrialized Concrete Building (ABCIC) , Brazil
2001 Distinction granted by the Ibero-American Programme on Science and Technology for Development (CYTED) – Recognition for the contribution to the scientific and technological development of the Ibero-American Community of Nations
Ciencia y Tecnología para el Desarrollo, Spain