???global.info.a_carregar???
J. Xavier holds the position of Associate Professor at the Department of Mechanical and Industrial Engineering (DEMI) at NOVA School of Science and Technology | NOVA FCT of Universidade NOVA de Lisboa. J. Xavier is a researcher at the Research and Development Unit for Mechanical and Industrial Engineering (UNIDEMI). UNIDEMI received an 'EXCELLENT' evaluation from the FCT-MCTES. Besides, he is a member of the board of directors of UNIDEMI, Coordinator of the Master's program in Advanced Digital Manufacturing Engineering, and a Member of the Scientific Committee of the Doctoral Program in Mechanical Engineering at DEMI. Since obtaining the PhD degree, J. Xavier has participated, as a researcher, in 10 projects with industry and 11 projects funded by national government agencies (e.g. FCT, Portugal2020, Ministerio de Economía y Competitividad, ES, EPSRC Fellowship, UK). He is currently a principal investigator (PI) of an IC&DT project (DOI: 10.54499/PTDC/EMD-EMD/1230/2021) and Co-PI in PeX project (DOI: 10.54499/2022.06903.PTDC), both supported by FCT. J. Xavier has published 106 papers in international peer-reviewed journals with an accumulated h-factor of 34. Among them, 55 articles were published in Q1 journals. J. Xavier has published 5 book chapters and contributed to 1 didactic publication, among other academic resources for students. J. Xavier completed the supervision/co-supervision of 4 PhD (3nd cycle), 42 MSc students (2nd cycle) and 3 MSc ERASMUS students. Moreover, he is carrying out the supervision/co-supervision of 7 PhD and 5 MSc students. He has been invited as a member of juries of PhD and MSc thesis in Portugal, and Europe (France, Spain, Italy and Brazil). He has also been invited to international visits in the framework of research and projects. He is also a regular reviewer of international and national peer-reviewed journals. J. Xavier has been collaborating as membership of scientific and organising committees and courses. He has been invited as chairman in sections at different international and national conferences and in scientific and organisation committees. Moreover, he has been participating in COST Actions dealing with wood, timber, wood-based products and X-ray computed tomography. Furthermore, efforts were actively engaged in transferring technology from the research promoted or in which he has been involved.
Read full resume ↓
Identification

Personal identification

Full name
José Xavier

Citation names

  • Xavier, José

Author identifiers

Ciência ID
4819-3BA8-9244
ORCID iD
0000-0002-7836-4598
Google Scholar ID
https://scholar.google.pt/citations?user=DRHkVokAAAAJ&hl=pt-PT&authuser=1
Researcher Id
A-4348-2013
Scopus Author Id
57216077399

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Medical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Upper intermediate (B2) Advanced (C1) Elementary (A2) Advanced (C1) Upper intermediate (B2)
Italian Intermediate (B1) Upper intermediate (B2) Beginner (A1) Proficiency (C2) Advanced (C1)
Education
Degree Classification
2007
Concluded
 Mechanical Engineering (Doutoramento)
Arts et Métiers ParisTech - Campus de Châlons-en-Champagne, France
"Characterisation of the wood stiffess variability within the stem by the virtual fields method: application to P. pinaster in the LR plane" (THESIS/DISSERTATION)
 "trés honorable"
2003
Concluded
 Engineering Technology (Mestrado)
Universidade de Trás-os-Montes e Alto Douro, Portugal
"Characterization of the shear behaviour of wood using the Iosipescu test" (THESIS/DISSERTATION)
 "aprovado com muito bom"
1999
Concluded
 Mechanical Engineering (Licenciatura)
Universidade de Trás-os-Montes e Alto Douro, Portugal
""Trigeração a gás natural"" (THESIS/DISSERTATION)
 15 out of 20
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2023/09/28 - Current Associate Professor (University Teacher) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2018/09/10 - 2023/09/27 Assistant Professor (University Teacher) Universidade Nova de Lisboa Departamento de Engenharia Mecânica e Industrial, Portugal

Others

Category
Host institution 		Employer
2015/02/23 - 2018/07/31 Invited lecturer (Professor Auxiliar Convidado a Tempo Integral) Universidade de Trás-os-Montes e Alto Douro Escola de Ciências e Tecnologia, Portugal
2014/04/14 - 2015/02/21 Post-Doc Research Assistant (Program RES2IN: RT1 Biomechanics contributions to healthcare) Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2009/06/21 - 2014/04/11 Post-Doc Research Assistants (program Ciência2008) Universidade de Trás-os-Montes e Alto Douro Centro de Investigação e de Tecnologias Agro-Ambientais e Biologicas, Portugal
2008/01/01 - 2009/06/20 Researcher fellowship at INEGI in the research project: "Experimental assessment of moisture effects on aging and durability of thermosetting polymers" (FTC: PTDC/EME-PME/67791/2006). Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2003/11/01 - 2007/11/30 1: Ph.D. student at LMPF/Arts et Métiers Châlons-en-Champagne. 2: Collaboration in the teaching service at Arts et Métiers Châlons-en-Champagne. Arts et Métiers ParisTech - Campus de Châlons-en-Champagne, France
1999/09/01 - 2003/10/31 1: Guest assistant lecture in Engineering Department/UTAD. 2: M.Sc. student at UTAD. 3: Scholarship in the research project: "Non-linear mechanical behaviour of wood" (FCT: POCTI/36270/EME/2000). Universidade de Trás-os-Montes e Alto Douro Escola de Ciências e Tecnologia, Portugal
Projects

Contract

Designation Funders
2021/12 - Current Development of methods for the identification of mechanical properties in tissues of plant origin
EXPL/EME-APL/0587/2021
Researcher
Fundação para a Ciência e a Tecnologia
Concluded
2025/09/01 - 2027/09/01 Enhancing Computational Modelling of Fluid-Structure Interaction in Ascending Thoracic Aortic Aneurysms Using Machine Learning, In Vivo and Ex Vivo Data
2024.07108.CBM
Principal investigator
Ongoing
2023/01/02 - 2026/03/31 Drivolution – Transição para a fábrica do futuro
C644913740-00000022
Researcher
2021/01/01 - 2025/12/31 Associate Laboratory of Energy, Transports and Aerospace.
LA/P/0079/2020
10.54499/LA/P/0079/2020
UIDB/50022/2020
10.54499/UIDB/50022/2020
10.54499/UIDB/50022/2020
10.54499/UIDP/50022/2020
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2021/01 - 2025/12 Laboratório Associado de Sistemas Inteligentes
168241UID
LA/P/0104/2020
10.54499/LA/P/0104/2020
Researcher
Universidade Nova de Lisboa Centro de Tecnologias e Sistemas, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Instituto Politécnico do Porto Centro de Investigação em Sistemas Computacionais Embebidos e de Tempo-Real, Portugal

Universidade do Minho, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Universidade do Porto Centro de Matemática, Portugal

Universidade Nova de Lisboa, Portugal

Universidade do Porto Laboratório de Inteligência Artificial e Ciência de Computadores, Portugal

Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade de Aveiro Instituto de Engenharia Eletrónica e Informática de Aveiro, Portugal

Universidade do Minho Centro ALGORITMI, Portugal

Universidade de Coimbra Departamento de Engenharia Civil, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade de Coimbra, Portugal

Instituto Politécnico do Porto Grupo de Investigação em Engenharia e Computação Inteligente para a Inovação e o Desenvolvimento, Portugal

Instituto Politécnico do Cávado e do Ave, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2022/01/04 - 2025/01/03 Fluid-structure interaction for functional assessment of ascending aortic aneurysms: a biomechanical-based approach toward clinical practice
PTDC/EMD-EMD/1230/2021
Principal investigator
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2021/07/01 - 2024/08/31 Construction system for strained gridshells based on new high-performance timber products and digital fabrication
EP/L026910/1 (ES)
Researcher
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
 España Ministerio de Ciencia e Innovación
Ongoing
2023/02/01 - 2024/08/01 Topology optimization and metal additive manufacturing unified to obtain functionally graded material structures (TOP&AM4FGM)
2022.06903.PTDC
Co-Principal Investigator (Co-PI)
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
2023/01/02 - 2023/12/31 Design and development of a biaxial testing device for material characterisation
UNIDEMI-IDT-10
Principal investigator
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2019/01/02 - 2022/08/01 Machinability of Additive Manufactured Parts for Tooling Industry
PTDC/EME-EME/31895/2017
10.54499/PTDC/EME-EME/31895/2017
Instituto de Engenharia Mecânica, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/01/02 - 2021/12/31 MAMTool - Machinability of Additive Manufactured Parts for Tooling Industry
02/SAICT/2017 - SAICT - 031895
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2018/06/01 - 2021/12/31 Avaliação e Resistência à Fadiga de Pontes Metálicas Ferroviárias usando Polímeros de Fibras reforçadas
PTDC/ECI-EST/30103/2017
Universidade do Porto, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2018/06/01 - 2021/05/31 FiberBridge - Fatigue strengthening and assessment of railway metallic bridges using fiber-reinforced polymers
02/SAICT/2017 - SAICT - 030103
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
2008/01/02 - 2019/12/31 Experimental assessment of moisture effects on aging and durability of thermosetting polymers
PTDC/EME-PME/67791/2006
Post-doc Fellow
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/01/01 - 2019/10/31 Innovative photomechanical approaches in identification of the dynamic mechanical behaviour of materials (Photodyn),
EP/L026910/1
Researcher
Universidade de Trás-os-Montes e Alto Douro Centro de Investigação e de Tecnologias Agro-Ambientais e Biologicas, Portugal
Concluded
2017/10/01 - 2017/12/22 AIRNET
Airbus RSC17020
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2016/01/02 - 2016/12/31 Advanced identification of fracture properties of composite materials
Daimler PO 1059247748
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2014/01/02 - 2015/12/31 Stabilo Twin Arch Shoes (STAR Shoes)
ROPAR - FABRICO DE CALÇADO ORTOPÉDICO, S.A.
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2014/01/02 - 2015/12/31 Definição de critérios para a determinação da fadiga de um militar em contextos de emprego climáticos diversos
ESE-INEGI-FEUP-LABIOMEP-CPAE
Researcher
Concluded
2012/01/02 - 2015/12/31 Fracture behaviour of cortical bone under mixed-mode I+II loading
PTDC/EME-PME/119093/2010
Researcher
Universidade de Trás-os-Montes e Alto Douro Centro de Investigação e de Tecnologias Agro-Ambientais e Biologicas, Portugal
 Fundação para a Ciência e a Tecnologia
2012/01/02 - 2015/12/31 2genComp – second generation Composites
Airbus PO 8202919946
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2011/01/02 - 2014/12/31 Numerical and experimental study of cohesive laws in bonded wood joints
PTDC/EME-PME/114443/2009
Researcher
Universidade de Trás-os-Montes e Alto Douro Centro de Investigação e de Tecnologias Agro-Ambientais e Biologicas, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2013/01/02 - 2013/12/31 High strain rate characterization of polymer composites - Project II
Aernnova Aerospace S.A. UMEC-AERN-2012-11-24
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2012/01/02 - 2013/12/31 Methods for the characterization of the translaminar fracture toughness of polymer composites.
Daimler PO 1059203795
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2011/01/01 - 2013/12/31 Projecto Estratégico - UI 4016 - 2011-2012
PEst-OE/CED/UI4016/2011
PEst-C/AGR/UI4033/2011
Instituto Politécnico de Viseu, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal

Universidade de Trás-os-Montes e Alto Douro Centro de Investigação e de Tecnologias Agro-Ambientais e Biologicas, Portugal

Instituto Politécnico de Viseu Centro de Estudos em Educação Tecnologia e Saúde, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/02 - 2012/12/31 High strain rate effects on textile and unidirectional composites
Aernnova AESI/11-052
Researcher
Concluded
2009/01/02 - 2012/12/31 iComp- integrated method for structural design of Composite components.
Airbus PO 2311292
Researcher
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Concluded
2001/01/02 - 2003/12/31 Non-linear mechanical behaviour of wood
POCTI/36270/EME/2000
Research Fellow
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book chapter
  1. João C. A D. Filho; Luiz C. S. Nunes; José Xavier. "An Open-Source 2D Digital Image Correlation Software: Case Study on the Hyperelastic Behaviour of Silicone-Based Material". 2023.
    10.1007/978-3-031-29191-3_33
  2. Mourato, André; Valente, Rodrigo; Xavier, José; Brito, Moisés; Avril, Stéphane; Tomás, António; Fragata, José. "On the Importance of Modelling the Interplay Between the Blood Flow and the Aortic Wall in Ascending Thoracic Aortic Aneurysms". In Proceedings of the 10th Congress of the Portuguese Society of Biomechanics, 233-243. Springer Nature Switzerland, 2023.
    Published • 10.1007/978-3-031-47790-4_22
  3. Valente, Rodrigo; Mourato, André; Xavier, José; Brito, Moisés; Avril, Stéphane; Tomás, António; Fragata, José. "CFD Model of the Ascending Thoracic Aortic Aneurysms with Patient Wall Deformation". In Proceedings of the 10th Congress of the Portuguese Society of Biomechanics, 69-77. Springer Nature Switzerland, 2023.
    Published • 10.1007/978-3-031-47790-4_7
  4. Guedes, R.M.; Xavier, J.. "Understanding and predicting stiffness in advanced fiber-reinforced polymer (FRP) composites for structural applications". 189-270. 2022.
  5. Mourato, André; Brito, Moisés; Xavier, José; António Cruz Tomás. "On the RANS modelling of the patient-specific thoracic aortic aneurysm". In Advances and Current Trends in Biomechanics. Taylor & Francis, 2021.
    Published
  6. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "A finite fracture mechanics model for the prediction of the notched response and large damage capability of composite laminates". 2015.
    10.4028/www.scientific.net/KEM.627.13
  7. Guedes, R.M.; Xavier, J.. "Understanding and predicting stiffness in advanced fibre-reinforced polymer (FRP) composites for structural applications". 2013.
    10.1533/9780857098641.3.298
Conference paper
  1. Xavier, José. "Development of a novel test design incorporating strain path changes for the inverse calibration of elastoplastic models". Paper presented in Digital Twins in Engineering & Artificial Intelligence and Computational Methods in Applied Science, DTE - AICOMAS 2025, 2025.
  2. Xavier, José. "Understanding the behaviour of a Cu-CuAl functionally-graded alloy using DIC". Paper presented in 18th PhotoMechanics -- 7th IDICs Conferences, 2024.
  3. Xavier, José. "Functionally graded composite structures designed by topology optimization and fabricated by T-WAAM". Paper presented in 17th International Symposium on Functionally Graded Materials (ISFGM 2024), 2024.
  4. Xavier, José. "On the design of a modified Arcan test setup with strain path changes for the inverse calibration of elastoplastic constitutive models". Paper presented in Congress on Numerical Methods in Engineering (CMN 2024), 2024.
  5. Xavier, José. "Using Simple Unidimensional Networks to Estimate Pressure Field in Ascending Thoracic Aortic Aneurysms". Paper presented in Congress on Numerical Methods in Engineering (CMN 2024), 2024.
  6. Xavier, José. "Computational Fluid Dynamics with mesh morphing in comparison with Fluid-Structure Interaction in Ascending Thoracic Aortic Aneurysm". Paper presented in Congress on Numerical Methods in Engineering (CMN 2024), 2024.
  7. Xavier, José. "Comparison of zero pressure geometry and prestress methodology in cardiovascular in-silico analysis". Paper presented in 29th Congress of the European Society of Biomechanics (ESB2024), 2024.
  8. Xavier, José. "CFD and FEA models of the Ascending Thoracic Aorta Aneurysm with patient-specific wall displacement". Paper presented in 29th Congress of the European Society of Biomechanics (ESB2024), 2024.
  9. Xavier, José. "Fluid-structure interaction analysis of ascending thoracic aortic aneurysms: a comparison of prestressing algorithms". Paper presented in 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2024), 2024.
  10. Xavier, José. "Mesh Morphing in Computational Fluid Dynamics and Fluid-Structure interaction comparison in the Ascending Thoracic Aortic Aneurysms". Paper presented in 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2024), 2024.
  11. Xavier, José. "Direct identification of fracture parameters of wood by digital image correlation". Paper presented in Portuguese Conference on Fracture (PCF2024), 2024.
  12. Xavier, José. "Numerical fatigue crack growth on CT specimens under Mode{-I}, Mode {II} and Mixed-mode I+II loading". Paper presented in Portuguese Conference on Fracture (PCF2024), 2024.
  13. Cochet, O.; Xavier, J.; Martins, R.F.; Moutou Pitti, R.. "Direct Assessment of Mode I Fracture Properties in Silver Fir Using MMCG Specimen and Digital Image Correlation". 2024.
    10.1016/j.prostr.2024.01.093
  14. Mesquita, H.; Azevedo, D.; Valente, R.; Sousa, P.J.; Domingues, T.; Tavares, P.J.; Xavier, J.; Moreira, P.M.G.J.. "Inflation Mechanics of Aortic Phantoms: An Experimental Study". 2024.
    10.1016/j.prostr.2024.01.116
  15. F.G. Cunha; T.G. Santos; Xavier, José; F. Pierron. "Numerical simulation and experimental work of a tensile test of Cu-CuAl alloy FGMs using DIC and VFM". Paper presented in 17th International Conference on Advances in Experimental Mechanics (BSSM2023), 2023.
  16. A. Mourato; R. Valente; Xavier, José; M. Brito; S. Avril; A. Tomás; J. Fragata. "Is Fluid-Structure Interaction the gold-standard method to perform patient-specific in-silico analysis on ascending thoracic aortic aneurysms?". Paper presented in 5th International Conference on Structural Integrity (ICSI2023), 2023.
  17. R. Valente; A. Mourato; Xavier, José; M. Brito; S. Avril; A. Tomás; J. Fragata. "Patient-specific wall displacement analysis: A comparative study of fluid-structure interaction, computation fluid dynamic, and computation solid mechanics on ascending thoracic aorta aneurysm". Paper presented in 5th In- ternational Conference on Structural Integrity (ICSI2023), 2023.
  18. O. Cochet; Xavier, José; R. Martins; R. Moutou-Pitti. "Direct identification of fracture parameters of wood in mode i by digital image correlation". Paper presented in 5th International Conference on Struc- tural Integrity (ICSI2023), 2023.
  19. J. Henriques; A. Andrade-Campos; Xavier, José. "On the identifiability of sheet metal anisotropic plasticity constitutive parameters using the arcan test and full-field measurements". Paper presented in 5th In- ternational Conference on Structural Integrity (ICSI2023), 2023.
  20. A. Majano-Majano; L. Gonzalo-Calderón; A.J. Lara-Bocanegra; J.R. Aira-Zunzunegui; Xavier, José. "Experimental investigation of the bending behavior of Spanish Eucalyptus globu- lus LVL". Paper presented in 5th International Conference on Structural Integrity (ICSI2023), 2023.
  21. H. Mesquita; R. Valente; D. Azevedo; P. Sousa; T. Domingues; P. Tavares; Xavier, José; P. Moreira. "Experimental characterization of inflation mechanical properties of aortic wall". Paper presented in 5th Inter- national Conference on Structural Integrity (ICSI2023), 2023.
  22. R. Araújo; F. Pereira; Xavier, José; N. Dourado; J. Morais. "Experimental characterization of apple skin". Paper presented in 5th International Conference on Structural Integrity (ICSI2023), 2023.
  23. R. Valente; A. Mourato; M. Brito; Xavier, José; S. Avril; A. Tomás; J. Fragata. "CFD and FEA models of the ascending thoracic aorta aneurysm with patient-specific wall displacement". Paper presented in 28th Congress of the European Society of Biomechanics (ESB2023), 2023.
  24. A. Mourato; R. Valentes; Xavier, José; M. Brito; S. Avril; A. Tomás; J. Fragata. "Comparison of zero pressure geometry and prestress methodology in cardiovascular in-silico analysis". Paper presented in 28th Con- gress of the European Society of Biomechanics (ESB2023), 2023.
  25. R. Araújo; F. Pereira; Xavier, José; J. Morais. "Mechanical beahaviour of apple skin". Paper presented in 20th International Conference on Experimental Mechanics: Applications in Materials Science, Engineering and Biomechanics (ICEM20)20th International Conference on Experimental Mechanics: Applications in Materials Science, Engineering and Biomechanics, 2023.
  26. D.J. Cruz; Xavier, José; R.L. Amaral; A.D. Santos. "Mechanical characterization of metallic sheets by experimental mini tensile testing". Paper presented in 20th International Conference on Experimen- tal Mechanics: Applications in Materials Science, Engineering and Biomechanics, 2023.
  27. J. Henriques; A. Andrade-Campos; Xavier, José. "On the inverse calibration of sheet metal aniso- tropic plasticity constitutive models using the arcan test and full-field measurements". Paper presented in VII ECCOMAS Young Investigators Conference (YIC2023), 2023.
  28. J. Henriques; A. Andrade-Campos; Xavier, José. "On the identifiability of sheet metal constitutive parameters using the arcan test". Paper presented in 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions (TEchMA2023)6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions (TEchMA2023), 2023.
  29. J. Henriques; A. Andrade-Campos; Xavier, José. "On the inverse identification of sheet metal mecha- nical behaviour using a heterogeneous arcan virtual experiment.". Paper presented in Conference in Material Forming (ESAFORM 2023), 2023.
  30. Henriques, J.; Andrade-Campos, A.; Xavier, J.. "On the inverse identification of sheet metal mechanical behaviour using a heterogeneous Arcan virtual experiment". 2023.
    10.21741/9781644902479-124
  31. F.G. Cunha; L.C. Fletcher; Xavier, José; Pierron, F.. "On material identification of Pinus pinaster ait. at high strain rate loading by the image-based inertial impact test". Paper presented in 16th International Conference on Advances in Experimental Mechanics (BSSM2022). BSSM’s Young Stress Analyst Competition (YSA22), 2022.
  32. F.G. Cunha; R.D. Valdemar; T.G. Santos; Xavier, José; Pierron, F.. "Fabrication of copper- aluminium fgms through wire and arc additive manufacturing". Paper presented in 16th International Confe- rence on Advances in Experimental Mechanics (BSSM2022), 2022.
  33. R. Valente; A. Mourato; M. Brito,; Xavier, José; S. Avril; J. César de Sá; A. Tomás. "A fluid-structure interaction approach for patient-specific thoracic aortic wall stress analysis using simvascular". Paper presented in 27th Congress of the European Society of Biomechanics (ESB 2022), 2022.
  34. F. Danzi; R. Tavares; Xavier, José; D. Fanteria; P.P. Camanho. "Effects of hybridization and ply thickness on carbon/carbon composite laminates strength and toughness". Paper presented in Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Mate- rials (ECCM20), 2022.
  35. H. Biscaia; Xavier, José; J.C.A.D. Filho; C. Chastre.. "Identificação da lei coesiva de ligações CFRP/Madeira com recurso à correlação de imagem digital". Paper presented in 3rd Conference on Testing and Experimentation in Civil Engineering (TEST&E2022), 2022.
  36. J.C.A.D. Filho; Xavier, J.; H. Biscaia. "On the direct identification of mode I cohesive law of wood based on digital image correlation". Paper presented in 3rd Conference on Testing and Experimentation in Civil Engineering (TEST&E2022), 2022.
  37. J.C.A.D. Filho; L.C.S. Nunes; Xavier, José. "ICorrVision-2D: An open-source digital image correla- tion software". Paper presented in 3rd Conference on Testing and Experimentation in Civil Engineering (TEST&E2022), 2022.
  38. Mourato, André; Valente, Rodrigo; Xavier, José; Brito, Moisés; Cruz Tomás, António; Stéphane Avril. Corresponding author: Mourato, André. "Numerical modeling of ascending aorta aneurysms: a systematic review on computational approaches and challenges towards the clinical practices". Paper presented in IX International Conference on Computational Bioengineering, Lisboa, 2022.
    Accepted
  39. Xavier, José. "On the inverse identification of DP600- steel constitutive parameters by a synthetic image approach based on digital image correlation". Paper presented in 41th International Deep Drawing Research Group Conference 2022, 2022.
  40. Xavier, José. "Architectured and additively manufactured double-negative index metamaterials". Paper presented in 8th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS, 2022.
  41. Xavier, José. "Identification of Swift law and Yld2000- 2s parameters using FEMU by a synthetic image approach based on digital image correlation". Paper presented in 25th International Conference in Material Forming (ESAFORM 2022), 2022.
  42. Xavier, José. "Numerical modeling of the ascending thoracic aorta: a systematic review on computational approaches and challenges towards the clinical practices". Paper presented in 9th International Conference on Computational Bioengineering (ICCB2022), 2022.
  43. Xavier, José. "A study on the computational fluid dynamics and fluid structure interaction models for the hemodynamic of ascending thoracic aorta aneurysm". Paper presented in 9th International Conference on Computational Bioengineering (ICCB2022), 2022.
  44. Danzi, F.; Tavares, R.; Xavier, J.; Fanteria, D.; Camanho, P.P.. "EFFECTS OF HYBRIDIZATION AND PLY THICKNESS ON CARBON/CARBON COMPOSITE LAMINATES STRENGTH AND TOUGHNESS". 2022.
  45. Almeida, C.J.; Cardoso, J.O.; Coelho, P.G.; Velhinho, A.; Xavier, J.; Borges, J.P.. "ARCHITECTURED AND ADDITIVELY MANUFACTURED DOUBLE-NEGATIVE INDEX METAMATERIALS". 2022.
    10.23967/eccomas.2022.056
  46. Henriques, J.; Conde, M.; Andrade-Campos, A.; Xavier, J.. "Identification of Swift Law Parameters Using FEMU by a Synthetic Image DIC-Based Approach". 2022.
    10.4028/p-33un7m
  47. J.D. Henriques; J. Xavier; A. Andrade-Campos.. "Identification of orthotropic elastic properties of wood by a synthetic image approach based on digital image correlation". Paper presented in Photomechanics- iDICs 2021, 2021.
  48. Xavier, José. "On material identification of Pinus pinaster Ait. at high strain rate loading by the image-based inertial impact test". Paper presented in 4th International Conference on Structural Integrity (ICSI2021), 2021.
  49. Xavier, José. "Impact of moisture content on tropical wood under opening mode". Paper presented in 4th International Conference on Structural Integrity (ICSI2021), 2021.
  50. Xavier, José. "Direct evaluation of Mode I cohesive law of Eucalyptus globulus L. bonded joints". Paper presented in 4th International Conference on Structural Integrity (ICSI2021), 2021.
  51. Xavier, José. "In situ monitoring of wire and arc additive manufacturing by digital image correlation: a case study". Paper presented in 4th International Conference on Structural Integrity (ICSI2021), 2021.
    https://doi.org/10.1016/j.prostr.2022.01.056
  52. Xavier, José. "Identification of orthotropic elastic properties of wood by digital image correlation and finite element model updating techniques". Paper presented in 4th International Conference on Structural Integrity (ICSI2021), 2021.
    https://doi.org/10.1016/j.prostr.2022.02.047
  53. Xavier, José. "Minisample tensile-compression testing for sheet metal mechanical characterization". Paper presented in 3rd International Conference on Materials Design and Applications (MDA 2020), 2020.
  54. Xavier, José. "Intralaminar fracture toughness and crack resistance curves for FRPs under high rate loading". Paper presented in 3 rd International Conference on Struc- tural Integrity (ICSI2019), 2019.
  55. Xavier, José. "High strain rate compressive behaviour of wood on the transverse plane". Paper presented in 3 rd International Conference on Structural Integrity (ICSI2019), 2019.
    https://doi.org/10.1016/j.prostr.2019.08.120
  56. Xavier, José. "Identification of high strain rate behaviour of wood based on an inertial impact test". Paper presented in 3 rd International Conference on Structural Integrity (ICSI2019), 2019.
  57. Xavier, José. "Experimental characterization of FFF printed parts under tensile, shear and mixed loads via Arcan-based test". Paper presented in EUROMAT2019, 2019.
  58. Xavier, José. "Intralaminar fracture toughness of UD glass fiber composite under high rate fiber tension and fiber compression loading". Paper presented in 12 th International DYMAT Conference, 2018.
    10.1051/epjconf/201818302018
  59. Xavier, José. "Methodology for ULCF data reduction using local boundary conditions provided by digital image correlation". Paper presented in 19 th Inter- national Colloquium on Mechanical Fatigue of Metals (ICMFM XIX), 2018.
  60. Xavier, José. "Applicability of critical distances theory to extreme-low-cycle fatigue". Paper presented in 19 th International Colloquium on Mechanical Fatigue of Metals (ICMFM XIX), 2018.
  61. Xavier, José. "Splitting capacity of eucalyptus globulus connections loaded perpendicular to the grain". Paper presented in 2018 World Conference on Timber Engineering, 2018.
  62. Xavier, José. "AlSi9Cu3 cast alloy mechanical characterization using Astakhov test specimens". Paper presented in 8 th International Conference on Engineering Failure Analysisg, 2018.
  63. Xavier, José. "Improving intralaminar fracture toughness of composite laminates by changing the orientation of the mid-plane clustered plies". Paper presented in International Conference on Composite Materials Science and Technology (ICCMST 2018), 2018.
  64. Majano-Majano, A.; Lara-Bocanegra, A.J.; Xavier, J.; Morais, J.. "Experimental research on hardwood connections loaded perpendicular to the grain". 2018.
  65. Xavier, José. "Measuring wood bending stiffness components by the virtual fields method: an integrated image-based approach". Paper presented in 2 nd International Conference on Structural Integrity (ICSI), 2017.
  66. Xavier, José. "Efficiency of approximation methods for obtaining the strain fields from digital image correlation". Paper presented in 2 nd International Conference on Structural Integrity (ICSI), 2017.
  67. Xavier, José. "Application of digital image correlation and high speed photography to determine the fiber failure fracture toughness of composites under high rate loading". Paper presented in 12 th International Conference on Advances in Experimental Mechanics (BSSM), 2017.
  68. Morais, José Joaquim Lopes; Xavier, José; Almeida, B.. "Dinâmica inversa do salto vertical: coordenadas relativas e absolutas". Paper presented in 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
    Published
  69. Arteiro, A.; Catalanotti, G.; Xavier, J.; Linde, P.; Camanho, P.P.. "Structural response of aerospace-grade thin-ply woven and non-crimp fabrics". 2017.
  70. Xavier, José. "Durability of bond between near-surface-mounted CFRP strips and concrete under several environmental actions". Paper presented in 7 th International Conference of Asian Concrete Federation (ACF2016), 2016.
  71. Xavier, José. "Measurement of fracture toughness for fiber tensile failure mode of UD composites under high rate loading". Paper presented in 19 th Inter- national Conference on Composite Structures (ICCS19), 2016.
  72. Xavier, José. "Selective ply-level hy- bridisation for improved notched response". Paper presented in 17 th European Conference for Composite Materials (ECCM17), 2016.
  73. Arteiro, A.; Furtado, C.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Selective ply-level hybridisation for improved notched response". 2016.
  74. Kuhn, P.; Catalanotti, G.; Xavier, J.; Cidade, R.; Koerber, H.; Camanho, P.P.. "Measurement of fracture toughness for fiber compressive failure mode of UD composites under high rate loading". 2016.
  75. Rana, Sohel; Parveen, Shama; Fangueiro, Raúl; Paiva, M. C.; Xavier, José. "Development of ductile cementitiuos composites using carbon nanotubes". Paper presented in NanoPortugal2015 – International Conference, Porto, 2015.
  76. Sampayo, L.M.C.M.V.; Monteiro, P.M.F.; Correia, J.A.F.O.; Xavier, J.M.C.; De Jesus, A.M.P.; Fernandez-Canteli, A.; Calçada, R.A.B.. "Probabilistic S-N Field Assessment for a Notched Plate Made of Puddle Iron from the Eiffel Bridge with an Elliptical Hole". 2015.
    10.1016/j.proeng.2015.08.011
  77. Pinto, V.C.; Ramos, T.; Alves, S.; Xavier, J.; Tavares, P.; Moreira, P.M.G.P.; Guedes, R.M.. "Comparative Failure Analysis of PLA, PLA/GNP and PLA/CNT-COOH Biodegradable Nanocomposites thin Films". 2015.
    10.1016/j.proeng.2015.08.004
  78. Morais, José Joaquim Lopes; Xavier, José; Frazao, O.; Fernandes, J.R.A.. "Evaluation of fracture process zone and mode I cohesive law of wood bonded joints from digital image correlation and fibre Bragg grating measurements". Paper presented in 10th International Conference on Advances in Experimental Mechanics - BSSM, Edinburgh, 2015.
    Published
  79. Morais, José Joaquim Lopes; de Moura, M. F. S. F.; Silva, F. G. A.; Dourado, N.; Xavier, José; Pereira, F. A. M.; Dias, M. I. R.; Lourenço, P. J.; Judas, F. M.. "Determination of mode I fracture toughness of cortical human bone using the DCB test". Paper presented in 6th International Conference on Mechanics and Materials in Design (M2D), Ponta Delgada, 2015.
    Published
  80. Pinto, V.C.; Xavier, J.; Guedes, R.M.. "Experimental creep analysis of biodegradable polymer matrix nanocomposites for ACL replacement". 2014.
  81. Fernandes, J.R.A.; Passos, D.J.; Xavier, J.; Morais, J.J.L.; Frazão, O.. "Initial studies of glued wood joints using FBG strain sensors". 2014.
    10.1109/MePhoCo.2014.6866495
  82. Pereira, J.C.R.; De Jesus, A.M.P.; Fernandes, A.A.; Xavier, J.; Martins, B.. "Comparison of the monotonic, low-cycle and ultra-low-cycle fatigue behaviours of the X52, X60 and X65 piping steel grades". 2014.
    10.1115/PVP2014-28761
  83. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Notched response of non-crimp fabric thin-ply laminates". 2013.
  84. Mata, H.; Natal Jorge, R.; Parente, M.P.L.; Fernandes, A.A.; Santos, A.D.; Valente, R.A.F.; Xavier, J.. "Establishment of the mechanical properties of aluminium alloy of sandwich plates with metal foam core by using an image correlation procedure". 2012.
  85. Majano-Majano, A.; Fernandez-Cabo, J.L.; Xavier, J.. "Characterization of clear wood by a single specimen: Evaluation of first results and further improvements". 2012.
  86. Erçin, G.H.; Camanho, P.P.; Mahdi, S.; Linde, P.; Xavier, J.; Bessa, M.. "Size effects on the tensile and compressive failure of notched composite laminates". 2012.
    10.1016/j.compstruct.2012.10.004
  87. Xavier, José; Custódio, P.M.; Morais J.; Guedes, Rui. "Assessing mechanical properties of a polymer material by a video extensometer technique". Paper presented in 7th EUROMECH - Solid Mechanics Conference, ESMC 2009, Lisboa, 2009.
  88. Custódio, Pedro; Tranchete TM; José J. Morais; Rui Miranda Guedes; Xavier, José. "Influência da humidade e do envelhecimento físico no comportamento elástico de um epóxido". Paper presented in 7º Congresso Nacional de Mecânica Experimental - APAET, Vila Real, 2008.
Journal article
  1. André Mourato; Rodrigo Valente; José Xavier; Moisés Brito; Stéphane Avril; António C. Tomás; José Fragata. "Comparative analysis of Zero Pressure Geometry and prestress methods in cardiovascular Fluid-Structure Interaction". Computer Methods and Programs in Biomedicine (2024): https://doi.org/10.1016/j.cmpb.2024.108475.
    10.1016/j.cmpb.2024.108475
  2. Martins, Rui F.; Xavier, José; Caldeira, João. "Numerical Fatigue Crack Growth on Compact Tension Specimens under Mode I and Mixed-Mode (I+II) Loading". Materials 17 18 (2024): 4570. https://doi.org/10.3390/ma17184570.
    10.3390/ma17184570
  3. Silva, Rui F.; Coelho, Pedro G.; Gustavo, Carolina V.; Almeida, Cláudia J.; Farias, Francisco Werley Cipriano; Duarte, Valdemar R.; Xavier, José; et al. "Functionally Graded Materials and Structures: Unified Approach by Optimal Design, Metal Additive Manufacturing, and Image-Based Characterization". Materials 17 18 (2024): 4545. https://doi.org/10.3390/ma17184545.
    10.3390/ma17184545
  4. Valente, Rodrigo; Mourato, André; Xavier, José; Sousa, Pedro; Domingues, Tiago; Tavares, Paulo; Avril, Stéphane; Tomás, António; Fragata, José. "Experimental Protocols to Test Aortic Soft Tissues: A Systematic Review". Bioengineering 11 8 (2024): 745. https://doi.org/10.3390/bioengineering11080745.
    10.3390/bioengineering11080745
  5. Tiago Quinaz; Tânia F. Freire; Andrea Olmos; Marcos Martins; Fernando B. N. Ferreira; Marcelo F. S. M. de Moura; Andrea Zille; et al. "The Influence of Hydroxyapatite Crystals on the Viscoelastic Behavior of Poly(vinyl alcohol) Braid Systems". Biomimetics 9 2 (2024): 93. https://doi.org/10.3390/biomimetics9020093.
    Accepted • 10.3390/biomimetics9020093
  6. Teresa Campos; Rafael Araújo; José Xavier; Quy¿n Nguy¿n; Nuno Dourado; José Morais; Fábio Pereira. "Identification of Apple Fruit-Skin Constitutive Laws by Full-Field Methods Using Uniaxial Tensile Loading". Materials (2024): https://doi.org/10.3390/ma17030700.
    10.3390/ma17030700
  7. José Luis Gómez-Royuela; Almudena Majano-Majano; Antonio José Lara-Bocanegra; José Xavier; Marcelo F. S. F. de Moura. "Experimental and Numerical Research on the Splitting Capacity of European Beech Beams Loaded Perpendicular to the Grain by Connections: Influence of Different Geometrical Parameters". Applied Sciences (2024): https://doi.org/10.3390/app14020900.
    10.3390/app14020900
  8. Cochet, O.; Xavier, J.; Martins, R.F.; Pitti, R. Moutou. "Direct Assessment of Mode I Fracture Properties in Silver Fir Using MMCG Specimen and Digital Image Correlation". Procedia Structural Integrity 54 (2024): 354-360. https://doi.org/10.1016/j.prostr.2024.01.093.
    10.1016/j.prostr.2024.01.093
  9. Mesquita, Hugo; Azevedo, Daniela; Valente, Rodrigo; Sousa, Pedro J.; Domingues, Tiago; Tavares, Paulo J.; Xavier, José; Moreira, Pedro M.G.J.. "Inflation Mechanics of Aortic Phantoms: An Experimental Study". Procedia Structural Integrity 54 (2024): 536-544. https://doi.org/10.1016/j.prostr.2024.01.116.
    10.1016/j.prostr.2024.01.116
  10. Filho, J.C.A.D.; Xavier, J.; Nunes, L.C.S.. "On the experimental investigation of silicone-based soft composites under mode I loading using Digital Image Correlation". Theoretical and Applied Fracture Mechanics 127 (2023): 104049. https://doi.org/10.1016/j.tafmec.2023.104049.
    10.1016/j.tafmec.2023.104049
  11. A. Majano-Majano; A.J. Lara-Bocanegra; F. Pereira; J. Xavier; J. Morais; M.F.S.F. de Moura. "Direct and inverse cohesive law identification of hardwood bonded joints with 1C-PUR adhesive using DCB test". Composite Structures (2023): https://doi.org/10.1016/j.compstruct.2023.117013.
    10.1016/j.compstruct.2023.117013
  12. Majano-Majano, A.; Lara-Bocanegra, A.J.; Pereira, F.; Xavier, J.; Morais, J.; de Moura, M.F.S.F.. "Direct and inverse cohesive law identification of hardwood bonded joints with 1C-PUR adhesive using DCB test". Composite Structures 316 (2023): 117013. https://doi.org/10.1016/j.compstruct.2023.117013.
    10.1016/j.compstruct.2023.117013
  13. Filho, J.C.A.D.; Xavier, J.; Nunes, L.C.S.. "On the experimental investigation of silicone-based soft composites under mode I loading using Digital Image Correlation". Theoretical and Applied Fracture Mechanics 127 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85171615926&partnerID=MN8TOARS.
    10.1016/j.tafmec.2023.104049
  14. Antonio Roig; Antonio José Lara-Bocanegra; J. Xavier; Almudena Majano-Majano. "Design Framework for Selection of Grid Topology and Rectangular Cross-Section Size of Elastic Timber Gridshells Using Genetic Optimisation". Applied Sciences (2022): https://www.mdpi.com/2076-3417/13/1/63.
    10.3390/app13010063
  15. Daniel Cruz; J. Xavier; Rui Amaral; Abel D. Santos. "A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing". Micromachines (2022): https://www.mdpi.com/2072-666X/13/11/2027.
    10.3390/mi13112027
  16. José Luis Gómez-Royuela; Almudena Majano-Majano; Antonio José Lara-Bocanegra; José Xavier; M. F. S. F. de Moura. "Shear traction-separation laws of European beech under mode II loading by 3D digital image correlation". Wood Science and Technology (2022): https://doi.org/10.1007/s00226-022-01429-3.
    10.1007/s00226-022-01429-3
  17. João Henriques; José Xavier; António Andrade-Campos. "On the inverse identification of wood elastic properties using a DIC-based FEMU approach". International Journal of Structural Integrity (2022): https://doi.org/10.1108/IJSI-04-2022-0063.
    10.1108/IJSI-04-2022-0063
  18. André Mourato; Rodrigo Valente; José Xavier; Moisés Brito; Stéphane Avril; José César de Sá; António Tomás; José Fragata. "Computational Modelling and Simulation of Fluid Structure Interaction in Aortic Aneurysms: A Systematic Review and Discussion of the Clinical Potential". Applied Sciences (2022): https://doi.org/10.3390/app12168049.
    10.3390/app12168049
  19. Catarina Silva; Jorge M. Branco; Zabih Mehdipour; Jose Xavier; Paulo B. Lourenço. "Experimental Stress Analysis of Cross-Laminated Timber Elements under Cyclic Moisture". Journal of Materials in Civil Engineering (2022): https://doi.org/10.1061/(ASCE)MT.1943-5533.0004336.
    10.1061/(ASCE)MT.1943-5533.0004336
  20. Pereira, Fábio; Morais, José; Xavier, José; Dourado, N.; de Moura, M.F.S.F.. "Experimental evaluation of cohesive laws components of mixed-mode I + II fracture characterization of cortical bone". Engineering Fracture Mechanics 268 (2022): 108493. http://dx.doi.org/10.1016/j.engfracmech.2022.108493.
    Published • 10.1016/j.engfracmech.2022.108493
  21. Almudena Majano-Majano; Antonio José Lara-Bocanegra; José Xavier; Manuel Guaita. "Splitting capacity of Eucalyptus globulus beams loaded perpendicular to the grain by connections". Materials and Structures 55 5 (2022): https://doi.org/10.1617/s11527-022-01983-z.
    10.1617/s11527-022-01983-z
  22. Rodrigo Valente; André Mourato; Moisés Brito; José Xavier; António Tomás; Stéphane Avril. "Fluid-Structure Interaction Modeling of Ascending Thoracic Aortic Aneurysms in SimVascular". Biomechanics (2022): https://doi.org/10.3390/biomechanics2020016.
    10.3390/biomechanics2020016
  23. J.L. Gómez-Royuela; A. Majano-Majano; A.J. Lara-Bocanegra; J. Xavier; M.F.S.F. de Moura. "Evaluation of R-curves and cohesive law in mode I of European beech". Theoretical and Applied Fracture Mechanics 118 (2022): 103220-103220. https://doi.org/10.1016/j.tafmec.2021.103220.
    10.1016/j.tafmec.2021.103220
  24. João Filho; José Xavier; Luiz Nunes. "An Alternative Digital Image Correlation-Based Experimental Approach to Estimate Fracture Parameters in Fibrous Soft Materials". Materials 15 7 (2022): 2413-2413. https://doi.org/10.3390/ma15072413.
    10.3390/ma15072413
  25. Almudena Majano-Majano; Antonio José Lara-Bocanegra; José Xavier; Fábio Pereira; José Morais. "Direct evaluation of mode I cohesive law of eucalyptus bonded joints". Procedia Structural Integrity 37 (2022): 492-499.
    https://doi.org/10.1016/j.prostr.2022.01.114
  26. João Henriques; José Xavier; António Andrade-Campos. "Identification of Orthotropic Elastic Properties of Wood by a Synthetic Image Approach Based on Digital Image Correlation". Materials (2022): https://doi.org/10.3390/ma15020625.
    10.3390/ma15020625
  27. de Deus Filho, J.C.A.; da Silva Nunes, L.C.; Xavier, J.M.C.. "iCorrVision-2D: An integrated python-based open-source Digital Image Correlation software for in-plane measurements (Part 1)". SoftwareX 19 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85134431112&partnerID=MN8TOARS.
    10.1016/j.softx.2022.101131
  28. Filho, J.; Nunes, L.; Xavier, J.. "iCorrVision-3D: An integrated python-based open-source Digital Image Correlation Software for in-plane and out-of-plane measurements (Part 2)". SoftwareX 19 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85134249473&partnerID=MN8TOARS.
    10.1016/j.softx.2022.101132
  29. Silva, T.; Silva, F.; Xavier, J.; Gregório, A.; Reis, A.; Rosa, P.; Konopík, P.; Rund, M.; Jesus, A.. "Mechanical Behaviour of Maraging Steel Produced by SLM". Procedia Structural Integrity 34 (2021): 45-50. http://dx.doi.org/10.1016/j.prostr.2021.12.007.
    Published • 10.1016/j.prostr.2021.12.007
  30. F Danzi; RP Tavares; J Xavier; D Fanteria; PP Camanho. "Effects of hybridization and ply thickness on the strength and toughness of composite laminates". Journal of Composite Materials (2021): 002199832110417-002199832110417. https://doi.org/10.1177/00219983211041762.
    10.1177/00219983211041762
  31. Silva, Tiago; Gregório, Afonso; Silva, Filipe; Xavier, José; Reis, Ana; Rosa, Pedro; de Jesus, Abílio. "Numerical-Experimental Plastic-Damage Characterisation of Additively Manufactured 18Ni300 Maraging Steel by Means of Multiaxial Double-Notched Specimens". Journal of Manufacturing and Materials Processing 5 3 (2021): 84. http://dx.doi.org/10.3390/jmmp5030084.
    Published • 10.3390/jmmp5030084
  32. Filipa G. Cunha; Telmo G. Santos; José Xavier. "In Situ Monitoring of Additive Manufacturing Using Digital Image Correlation: A Review". Materials (2021): https://doi.org/10.3390/ma14061511.
    10.3390/ma14061511
  33. Silva, Catarina; Branco, Jorge M.; Mehdipour, Zabih; Xavier, José; Rebouças, Arthur S.; Lourenço, Paulo B.. "Strain variation analysis of cross-laminated timber elements under cyclic moisture". Journal of Building Engineering (2021): 102373. http://dx.doi.org/10.1016/j.jobe.2021.102373.
    10.1016/j.jobe.2021.102373
  34. Pagaimo, Filipe; Fernandes, Paulo R.; Xavier, José; Alves, Óscar L.; Xavier, José. "New methodology to assess in-vivo quality of motion in cervical spine". Clinical Biomechanics 82 (2021): 105275-105275. http://dx.doi.org/10.1016/j.clinbiomech.2021.105275.
    Published • 10.1016/j.clinbiomech.2021.105275
  35. Furtado, Carolina; Tavares, Rodrigo P.; Arteiro, Albertino; Xavier, José; Linde, Peter; Wardle, Brian L.; Camanho, Pedro P.; Xavier, José. "Effects of ply thickness and architecture on the strength of composite sub-structures". Composite Structures 256 (2021): 113061-113061. http://dx.doi.org/10.1016/j.compstruct.2020.113061.
    10.1016/j.compstruct.2020.113061
  36. Oliveira, Jorge; Xavier, José; Pereira, Fábio; Morais, José; de Moura, Marcelo. "Direct Evaluation of Mixed Mode I+II Cohesive Laws of Wood by Coupling MMB Test with DIC". Materials 14 2 (2021): 374. http://dx.doi.org/10.3390/ma14020374.
    Published • 10.3390/ma14020374
  37. Cappello, Riccardo; Pitarresi, Giuseppe; Xavier, José; Catalanotti, Giuseppe. "Experimental determination of mode I fracture parameters in orthotropic materials by means of Digital Image Correlation". Theoretical and Applied Fracture Mechanics 108 (2020): 102663. http://dx.doi.org/10.1016/j.tafmec.2020.102663.
    10.1016/j.tafmec.2020.102663
  38. Maimí, P.; Wagih, A.; Ortega, A.; Xavier, José; Blanco, N.; Camanho, P.P.. "On the experimental determination of the J-curve of quasi-brittle composite materials". International Journal of Fracture 108 (2020): 102663. https://doi.org/10.1007/s10704-020-00456-0.
  39. Ferreira, Isaac; Jesus, Abílio; Machado, Margarida; Pereira, João; Alves, Jorge Lino; Xavier, José. "Experimental characterisation of fused filament fabrication printed parts under tension, shear, and combined shear–tension loads via Arcan test". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234 6 (2020): 835-850. http://dx.doi.org/10.1177/1464420720908625.
    10.1177/1464420720908625
  40. Almudena Majano-Majano; Antonio José Lara-Bocanegra; José Xavier; José Morais. "Experimental Evaluation of Mode II fracture Properties of Eucalyptus globulus L.". Materials 13 3 (2020): 745-745. https://doi.org/10.3390/ma13030745.
    10.3390/ma13030745
  41. J.C.R. Pereira; A.M.P. de Jesus; J. Xavier; J.A.F.O. Correia; L. Susmel; A.A. Fernandes. "Low and ultra-low-cycle fatigue behavior of X52 piping steel based on theory of critical distances". International Journal of Fatigue (2020): 105482-105482. https://doi.org/10.1016/j.ijfatigue.2020.105482.
    10.1016/j.ijfatigue.2020.105482
  42. Xavier, José; Catalanotti, G.; Kuhn, P.; Xavier, J.; Koerber, H.. "High strain rate characterisation of intralaminar fracture toughness of GFRPs for longitudinal tension and compression failure". Composite Structures 240 (2020): 112068-112068. https://www.sciencedirect.com/science/article/pii/S0263822319343958.
    https://doi.org/10.1016/j.compstruct.2020.112068
  43. Maimí, P.; Wagih, A.; Ortega, A.; Xavier, J.; Blanco, N.; Ponces Camanho, P.. "On the experimental determination of the J -curve of quasi-brittle composite materials". International Journal of Fracture 224 2 (2020): 199-215. http://www.scopus.com/inward/record.url?eid=2-s2.0-85086780003&partnerID=MN8TOARS.
    10.1007/s10704-020-00456-0
  44. Almudena Majano-Majano; Antonio José Lara-Bocanegra; J. Xavier; José Morais. "Measuring the Cohesive Law in Mode I Loading of Eucalyptus globulus". Materials 12 1 (2019): 23. https://doi.org/10.3390/ma12010023.
    10.3390/ma12010023
  45. Xavier, José. "High strain rate compressive behaviour of wood on the transverse plane". Procedia Structural Integrity 17 (2019): 900-905. http://www.sciencedirect.com/science/article/pii/S2452321619303294.
    https://doi.org/10.1016/j.prostr.2019.08.120
  46. Xavier, José. "Fracture characterization of a cast aluminum alloy aiming machining simulation". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233 3 (2019): 402-412. https://doi.org/10.1177/1464420718799116.
    10.1177/1464420718799116
  47. Xavier, José. "Determination of mode I dynamic fracture toughness of IM7-8552 composites by digital image correlation and machine learning". Composite Structures 210 (2019): 707-714. https://www.sciencedirect.com/science/article/pii/S0263822318320932.
    https://doi.org/10.1016/j.compstruct.2018.11.089
  48. José Xavier; Fabrice Pierron. "Measuring orthotropic bending stiffness components of Pinus pinaster by the virtual fields method". The Journal of Strain Analysis for Engineering Design (2018): 030932471879108-030932471879108. https://doi.org/10.1177/0309324718791087.
    10.1177/0309324718791087
  49. João Luís Pereira; José Xavier; Bahman Ghiassi; José Lousada; José Morais. "On the identification of earlywood and latewood radial elastic modulus of Pinus pinaster by digital image correlation: A parametric analysis". The Journal of Strain Analysis for Engineering Design (2018): 030932471878635-030932471878635. https://doi.org/10.1177/0309324718786351.
    10.1177/0309324718786351
  50. J. Xavier; J. Morais; F. Pereira. "Non-linear shear behaviour of bovine cortical bone by coupling the Arcan test with digital image correlation". Optics and Lasers in Engineering 110 (2018): 462-470. https://doi.org/10.1016/j.optlaseng.2018.07.004.
    10.1016/j.optlaseng.2018.07.004
  51. Rodrigo Lameiras; Joaquim A.O. Barros; Isabel B. Valente; José Xavier; Miguel Azenha. "Pull-out behaviour of glass-fibre reinforced polymer perforated plate connectors embedded in concrete. Part II: Prediction of load carrying capacity". Construction and Building Materials 169 (2018): 142-164. https://doi.org/10.1016/j.conbuildmat.2018.02.141.
    10.1016/j.conbuildmat.2018.02.141
  52. F.A.M. Pereira; M.F.S.F. de Moura; N. Dourado; J.J.L. Morais; J. Xavier; M.I.R. Dias; Xavier, José. "Determination of mode II cohesive law of bovine cortical bone using direct and inverse methods". International Journal of Mechanical Sciences 138-139 (2018): 448-456. https://doi.org/10.1016/j.ijmecsci.2018.02.009.
    10.1016/j.ijmecsci.2018.02.009
  53. Xavier, José. "Determination of the resistance-curve in Eucalyptus globulus through double cantilever beam tests". Materials and Structures 51 3 (2018): 77-77. https://doi.org/10.1617/s11527-018-1209-9.
    10.1617/s11527-018-1209-9
  54. Xavier, José. "A strategy to improve the structural performance of non-crimp fabric thin-ply laminates". Composite Structures 188 (2018): 438-449. http://www.sciencedirect.com/science/article/pii/S0263822317339090.
    https://doi.org/10.1016/j.compstruct.2017.11.072
  55. Xavier, José. "Characterization of the mechanical behaviour of wooden construction materials from “quinta lobeira de cima”". International Journal of Structural Integrity 9 3 (2018): 396-410. https://doi.org/10.1108/IJSI-06-2017-0039.
    10.1108/IJSI-06-2017-0039
  56. Xavier, José. "Determination of the crack resistance curve for intralaminar fiber tensile failure mode in polymer composites under high rate loading". Composite Structures 204 (2018): 276-287. http://www.sciencedirect.com/science/article/pii/S0263822318308079.
    https://doi.org/10.1016/j.compstruct.2018.07.039
  57. Xavier, José. "Durability of bond in {NSM} CFRP-concrete systems under different environmental conditions". Composites Part B: Engineering 138 (2018): 19-34. https://www.sciencedirect.com/science/article/pii/S1359836817311332.
    https://doi.org/10.1016/j.compositesb.2017.11.022
  58. Xavier, José. "Identification of transverse elastic properties of the diaphysis of cortical bone". Journal of Mechanical Engineering and Biomechanics 2 5 (2018): 50-55. https://doi.org/10.24243/JMEB/2.5.172.
    10.24243/JMEB/2.5.172
  59. de Sousa, Patrick; Esteves, Tiago; Campos, Daniel; Duarte, Fabio; Santos, Joana; Leao, Joao; Xavier, Jose; et al. "Human-Robot Interaction Based on Gestures for Service Robots". Classification in Bioapps: Automation of Decision Making (2018): https://publons.com/wos-op/publon/28025276/.
    10.1007/978-3-319-68195-5_76
  60. Pinto, V.C.; Ramos, T.; Alves, A.S.F.; Xavier, J.; Tavares, P.J.; Moreira, P.M.G.P.; Guedes, R.M.; Xavier, José. "Dispersion and failure analysis of PLA, PLA/GNP and PLA/CNT-COOH biodegradable nanocomposites by SEM and DIC inspection". Engineering Failure Analysis 71 (2017): 63-71. http://dx.doi.org/10.1016/j.engfailanal.2016.06.009.
    10.1016/j.engfailanal.2016.06.009
  61. Xavier, José. "Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics". Composite Structures 179 (2017): 208-223. http://www.sciencedirect.com/science/article/pii/S0263822316330057.
    http://dx.doi.org/10.1016/j.compstruct.2017.06.047
  62. Xavier, José. "{ULCF} assessment of {X52} piping steel by means of cyclic bending tests". Journal of Constructional Steel Research 138 (2017): 663-674. http://www.sciencedirect.com/science/article/pii/S0143974X17304352.
    https://doi.org/10.1016/j.jcsr.2017.08.020
  63. Xavier, José. "Fracture characterization of human cortical bone under mode II loading using the end-notched flexure test". Medical & Biological Engineering & Computing 55 8 (2017): 1249-1260. https://doi.org/10.1007/s11517-016-1586-6.
    10.1007/s11517-016-1586-6
  64. Xavier, José. "Combined analytical-numerical methodologies for the evaluation of mixed-mode (I+II) fatigue crack growth rates in structural steels". Engineering Fracture Mechanics 185 Supplement (2017): 124-138. http://www.sciencedirect.com/science/article/pii/S0013794417300383.
    https://doi.org/10.1016/j.engfracmech.2017.04.016
  65. Xavier, José. "Characterization of the Tensile Mechanical Behavior of Wooden Construction on Materials from Historic Building". Procedia Structural Integrity 5 Supplement (2017): 1086-1091. http://www.sciencedirect.com/science/article/pii/S2452321617301944.
    https://doi.org/10.1016/j.prostr.2017.07.083
  66. Xavier, José. "Numerical analysis of a double shear standard bolted connection considering monotonic loadings". Engineering Structures and Technologies 9 4 (2017): 183-194. https://doi.org/10.3846/2029882X.2017.1414638.
    10.3846/2029882X.2017.1414638
  67. Xavier, José. "Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading". Composite Structures 182 Supplement (2017): 164-175. http://www.sciencedirect.com/science/article/pii/S0263822317320822.
    https://doi.org/10.1016/j.compstruct.2017.09.040
  68. Xavier, José. "Direct and inverse methods applied to the determination of mode I cohesive law of bovine cortical bone using the DCB test". International Journal of Solids and Structures 128 Supplement (2017): 210-220. http://www.sciencedirect.com/science/article/pii/S002076831730392X.
    https://doi.org/10.1016/j.ijsolstr.2017.08.028
  69. Furtado, C.; Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Selective ply-level hybridisation for improved notched response of composite laminates". Composite Structures 145 (2016): 1-14. http://dx.doi.org/10.1016/j.compstruct.2016.02.050.
    10.1016/j.compstruct.2016.02.050
  70. P. Subramani; Sohel Rana; Bahman Ghiassi; Raul Fangueiro; Daniel V. Oliveira; Paulo B. Lourenco; Jose Xavier. "Development and characterization of novel auxetic structures based on re-entrant hexagon design produced from braided composites". Composites Part B: Engineering 93 (2016): 132-142. https://doi.org/10.1016/j.compositesb.2016.02.058.
    10.1016/j.compositesb.2016.02.058
  71. Xavier, J.; Majano-Majano, A.; Fernandez-Cabo, J.. "On the identifiability of stiffness components of clear wood from a 3D off-axes prismatic specimen: angle orientation and friction effects". European Journal of Wood and Wood Products 74 3 (2016): 285-290. http://dx.doi.org/10.1007/s00107-016-1032-3.
    10.1007/s00107-016-1032-3
  72. Silva, Patrícia; Fernandes, Pedro; Sena-Cruz, José; Xavier, José; Castro, Fernando; Soares, Delfim; Carneiro, Vítor. "Effects of different environmental conditions on the mechanical characteristics of a structural epoxy". Composites Part B: Engineering 88 (2016): 55-63. http://dx.doi.org/10.1016/j.compositesb.2015.10.036.
    10.1016/j.compositesb.2015.10.036
  73. Silva, F.G.A.; De Moura, M.F.S.F.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; Morais, J.J.L.; Dias, M.I.R.. "Mixed-mode I+II fracture characterization of human cortical bone using the Single Leg Bending test". Journal of the Mechanical Behavior of Biomedical Materials 54 (2016): 72-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943522440&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2015.09.004
  74. Dourado, N.; de Moura, M.F.S.F.; Xavier, J.; Pereira, F.A.M.. "A New Procedure for Mode I Fracture Characterization of Cement-Based Materials". Strain (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84946430039&partnerID=MN8TOARS.
    10.1111/str.12165
  75. Koerber, H.; Xavier, J.; Camanho, P.P.; Essa, Y.E.; Martín De La Escalera, F.. "High strain rate behaviour of 5-harness-satin weave fabric carbon-epoxy composite under compression and combined compression-shear loading". International Journal of Solids and Structures 54 (2015): 172-182. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919331429&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2014.10.018
  76. Garzón-Roca, J.; Sena-Cruz, J.M.; Fernandes, P.; Xavier, J.. "Effect of wet-dry cycles on the bond behaviour of concrete elements strengthened with NSM CFRP laminate strips". Composite Structures 132 (2015): 331-340. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937057145&partnerID=MN8TOARS.
    10.1016/j.compstruct.2015.05.053
  77. Catalanotti, G.; Xavier, J.. "Measurement of the mode II intralaminar fracture toughness and R-curve of polymer composites using a modified Iosipescu specimen and the size effect law". Engineering Fracture Mechanics 138 (2015): 202-214. http://www.scopus.com/inward/record.url?eid=2-s2.0-84939980321&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2015.03.005
  78. Ghiassi, B.; Xavier, J.; Oliveira, D.V.; Kwiecien, A.; Lourenço, P.B.; Zajac, B.. "Evaluation of the bond performance in FRP-brick components re-bonded after initial delamination". Composite Structures 123 (2015): 271-281. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921333785&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.12.047
  79. Fernández-Cabo, J.L.; Widmann, R.; Arce-Blanco, M.; Crocetti, R.; Xavier, J.; Majano-Majano, A.. "Assessment of wire-frame analysis models of a historical planked timber arch". Proceedings of the Institution of Civil Engineers: Structures and Buildings 168 9 (2015): 680-694. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940416525&partnerID=MN8TOARS.
    10.1680/stbu.14.00049
  80. Xavier, J.; Fernandes, J.R.A.; Frazão, O.; Morais, J.J.L.. "Measuring mode I cohesive law of wood bonded joints based on digital image correlation and fibre Bragg grating sensors". Composite Structures 121 (2015): 83-89. http://www.scopus.com/inward/record.url?eid=2-s2.0-84912139743&partnerID=MN8TOARS.
    10.1016/j.compstruct.2014.11.017
  81. Silva, Filipe;; de Moura, Marcelo;; Dourado, Nuno;; Xavier, Jos{\'e. "Fracture Characterization of Human Cortical Bone Under Mode I Loading". Journal of Biomechanical Engineering 137 12 (2015): 121004-121004. http://dx.doi.org/10.1115/1.4031846.
    10.1115/1.4031846
  82. J. Xavier; J.R.A. Fernandes; J.J.L. Morais; O. Frazão. "Fracture behaviour of wood bonded joints under modes I and II by digital image correlation and fibre Bragg grating sensors". Ciência & Tecnologia dos Materiais 27 1 (2015): 27-35. http://www.sciencedirect.com/science/article/pii/S0870831215000439.
    http://dx.doi.org/10.1016/j.ctmat.2015.06.001
  83. Xavier, José. "Determining mode I cohesive law of Pinus pinaster by coupling double cantilever beam test with digital image correlation". Fracture and Structural Integrity 31 (2015): 13-22.
    Published
  84. Pinto, Viviana Correia; Xavier, Jose; Goncalves, Carolina; Magalhaes, Fernao D.; Guedes, Rui Miranda. "HYDROLYTIC DEGRADATION RATES FOR MOLECULAR WEIGHT AND TENSILE STRENGTH OF PLA/GNP AND PLA/CNT IN PBS MEDIUM". M2d2015: Proceedings of the International Conference on Mechanics and Materials in Design (2015): https://publons.com/wos-op/publon/26944423/.
  85. Catalanotti, Giuseppe; Xavier, Jose; Camanho, Pedro. "FRACTURE TOUGHNESS AND CRACK RESISTANCE CURVES IN THE LONGITUDINAL COMPRESSIVE FAILURE OF POLYMER COMPOSITES". M2d2015: Proceedings of the International Conference on Mechanics and Materials in Design (2015): https://publons.com/wos-op/publon/42940761/.
  86. Fernández-Cabo, J.L.; Widmann, R.; Arce-Blanco, M.; Crocetti, R.; Xavier, J.; Majano-Majano, A.. "Assessment of wire-frame analysis models of a historical planked timber arch". Proceedings of the Institution of Civil Engineers: Structures and Buildings 168 9 (2015): 680-694. http://www.scopus.com/inward/record.url?eid=2-s2.0-85114201683&partnerID=MN8TOARS.
    10.1680/jstbu.14.00049
  87. Dourado, Nuno; de Moura, Marcelo; de Jesus, Abilio; Xavier, Jose. "NUMERICAL AND EXPERIMENTAL CHARACTERIZATION OF STEEL-WOOD DOWELED JOINTS UNDER QUASI-STATIC LOADING". M2d2015: Proceedings of the International Conference on Mechanics and Materials in Design (2015): https://publons.com/wos-op/publon/5526894/.
  88. J. Xavier; M. Oliveira; J.J.L. Morais; M.F.S.F. de Moura; Xavier, J.; Oliveira, M.; Morais, J.J.L.; de Moura, M.F.S.F.. "Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation". Construction and Building Materials 71 (2014): 109-115. http://dx.doi.org/10.1016/j.conbuildmat.2014.08.021.
    10.1016/j.conbuildmat.2014.08.021
  89. Xavier, J.; Pereira, J.C.R.; De Jesus, A.M.P.. "Characterisation of steel components under monotonic loading by means of image-based methods". Optics and Lasers in Engineering 53 (2014): 142-151. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884889489&partnerID=MN8TOARS.
    10.1016/j.optlaseng.2013.09.004
  90. Silva, F.G.A.; Morais, J.J.L.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; De Moura, M.F.S.F.; Moura, M.F.S.F.. "Determination of cohesive laws in wood bonded joints under mode II loading using the ENF test". International Journal of Adhesion and Adhesives 51 8 (2014): 54-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896510628&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.02.007
  91. Pereira, J.; Xavier, J.; Morais, J.; Lousada, J.. "Assessing wood quality by spatial variation of elastic properties within the stem: Case study of pinus pinaster in the transverse plane1". Canadian Journal of Forest Research 44 2 (2014): 107-117. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893607771&partnerID=MN8TOARS.
    10.1139/cjfr-2013-0207
  92. Pereira, J.C.R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A.A.. "Ultra low-cycle fatigue behaviour of a structural steel". Engineering Structures 60 (2014): 214-222. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893024775&partnerID=MN8TOARS.
    10.1016/j.engstruct.2013.12.039
  93. Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Measurement of the compressive crack resistance curve of composites using the size effect law". Composites Part A: Applied Science and Manufacturing 56 (2014): 300-307. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896531283&partnerID=MN8TOARS.
    10.1016/j.compositesa.2013.10.017
  94. Xavier, J.; Monteiro, P.; Morais, J.J.L.; Dourado, N.; De Moura, M.F.S.F.. "Moisture content effect on the fracture characterisation of Pinus pinaster under mode i". Journal of Materials Science 49 21 (2014): 7371-7381. http://www.scopus.com/inward/record.url?eid=2-s2.0-84906319906&partnerID=MN8TOARS.
    10.1007/s10853-014-8375-0
  95. Xavier, J.; Oliveira, M.; Monteiro, P.; Morais, J.J.L.; de Moura, M.F.S.F.. "Direct Evaluation of Cohesive Law in Mode I of Pinus pinaster by Digital Image Correlation". Experimental Mechanics 54 5 (2014): 829-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900296652&partnerID=MN8TOARS.
    10.1007/s11340-013-9838-y
  96. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Large damage capability of non-crimp fabric thin-ply laminates". Composites Part A: Applied Science and Manufacturing 63 (2014): 110-122. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900840169&partnerID=MN8TOARS.
    10.1016/j.compositesa.2014.04.002
  97. Subramani, P.; Rana, S.; Oliveira, D.V.; Fangueiro, R.; Xavier, J.. "Development of novel auxetic structures based on braided composites". Materials and Design 61 (2014): 286-295. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901338081&partnerID=MN8TOARS.
    10.1016/j.matdes.2014.04.067
  98. Abreu, Pedro Henriques; Xavier, Jose; Silva, Daniel Castro; Reis, Luis Paulo; Petry, Marcelo. "Using Kalman Filters to Reduce Noise from RFID Location System". The Scientific World Journal (2014): https://publons.com/wos-op/publon/4781780/.
    10.1155/2014/796279
  99. Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.; Melo-Pinto, P.. "Comparison between neural networks and partial least squares for intra-growth ring wood density measurement with hyperspectral imaging". Computers and Electronics in Agriculture 94 (2013): 71-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876743171&partnerID=MN8TOARS.
    10.1016/j.compag.2013.03.010
  100. Xavier, J.; Belini, U.; Pierron, F.; Morais, J.; Lousada, J.; Tomazello, M.. "Characterisation of the bending stiffness components of MDF panels from full-field slope measurements". Wood Science and Technology 47 2 (2013): 423-441. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878516880&partnerID=MN8TOARS.
    10.1007/s00226-012-0507-6
  101. Dias, G.F.; de Moura, M.F.S.F.; Chousal, J.A.G.; Xavier, J.. "Cohesive laws of composite bonded joints under mode I loading". Composite Structures 106 (2013): 646-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883366921&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.07.027
  102. Ghiassi, B.; Xavier, J.; Oliveira, D.V.; Lourenço, P.B.. "Application of digital image correlation in investigating the bond between FRP and masonry". Composite Structures 106 (2013): 340-349. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883329200&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.06.024
  103. Erçin, G.H.; Camanho, P.P.; Xavier, J.; Catalanotti, G.; Mahdi, S.; Linde, P.. "Size effects on the tensile and compressive failure of notched composite laminates". Composite Structures 96 (2013): 736-744. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870423235&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.10.004
  104. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Notched response of non-crimp fabric thin-ply laminates". Composites Science and Technology 79 (2013): 97-114. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876058452&partnerID=MN8TOARS.
    10.1016/j.compscitech.2013.02.001
  105. Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P.. "Notched response of non-crimp fabric thin-ply laminates: Analysis methods". Composites Science and Technology 88 (2013): 165-171. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885076549&partnerID=MN8TOARS.
    10.1016/j.compscitech.2013.09.003
  106. Fernandes, R.M.R.P.; Chousal, J.A.G.; De Moura, M.F.S.F.; Xavier, J.. "Determination of cohesive laws of composite bonded joints under mode II loading". Composites Part B: Engineering 52 (2013): 269-274. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878596266&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.04.007
  107. Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.; Melo-Pinto, P.. "Measurement of intra-ring wood density by means of imaging VIS/NIR spectroscopy (hyperspectral imaging)". Holzforschung 67 1 (2013): 59-65. http://www.scopus.com/inward/record.url?eid=2-s2.0-84873687812&partnerID=MN8TOARS.
    10.1515/hf-2011-0258
  108. Xavier, J.; De Jesus, A.M.P.; Morais, J.J.L.; Pinto, J.M.T.. "Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grain". Construction and Building Materials 26 1 (2012): 207-215. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052874444&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2011.06.012
  109. Xavier, J.; Morais, J.; Dourado, N.; De Moura, M.F.S.F.. "Measurement of mode I and mode II fracture properties of wood-bonded joints". Journal of Adhesion Science and Technology 25 20 (2012): 2881-2895. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862141074&partnerID=MN8TOARS.
    10.1163/016942411X576563
  110. Xavier, J.; Sousa, A.M.R.; Morais, J.J.L.; Filipe, V.M.J.; Vaz, M.. "Measuring displacement fields by cross-correlation and a differential technique: Experimental validation". Optical Engineering 51 4 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84859871140&partnerID=MN8TOARS.
    10.1117/1.OE.51.4.043602
  111. Xavier, José. "On the evaluation of elastic properties of P. pinaster at the growth ring scale". Mecânica Experimental 20 (2012): 51-58.
    Published
  112. Xavier, José. "On the determination of the modulus of elasticity of wood by compression tests parallel to the grain". Mecânica Experimental 20 (2012): 59-66.
    Published
  113. Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J.. "Cross-correlation and differential technique combination to determine displacement fields". Strain 47 SUPPL. 2 (2011): 87-98. http://www.scopus.com/inward/record.url?eid=2-s2.0-84555197525&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2010.00740.x
  114. Sousa, A.M.R.; Xavier, J.; Morais, J.J.L.; Filipe, V.M.J.; Vaz, M.. "Processing discontinuous displacement fields by a spatio-temporal derivative technique". Optics and Lasers in Engineering 49 12 (2011): 1402-1412. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052266999&partnerID=MN8TOARS.
    10.1016/j.optlaseng.2011.07.007
  115. Xavier, Jose; Abreu, Pedro Henriques; Reis, Luis Paulo; Petry, Marcelo. "Location and Automatic Calculation of trajectory in Furniture Objects Using RFID". Sistemas E Tecnologias de Informacao, Vol I (2011): https://publons.com/wos-op/publon/4781778/.
  116. de Moura, M.F.S.F.; Oliveira, J.M.Q.; Morais, J.J.L.; Xavier, J.. "Mixed-mode I/II wood fracture characterization using the mixed-mode bending test". Engineering Fracture Mechanics 77 1 (2010): 144-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-72049124798&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.09.014
  117. Morais, J.J.L.; de Moura, M.F.S.F.; Pereira, F.A.M.; Xavier, J.; Dourado, N.; Dias, M.I.R.; Azevedo, J.M.T.. "The double cantilever beam test applied to mode I fracture characterization of cortical bone tissue". Journal of the Mechanical Behavior of Biomedical Materials 3 6 (2010): 446-453. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955064860&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2010.04.001
  118. Koerber, H.; Xavier, J.; Camanho, P.P.. "High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation". Mechanics of Materials 42 11 (2010): 1004-1019. http://www.scopus.com/inward/record.url?eid=2-s2.0-78049316794&partnerID=MN8TOARS.
    10.1016/j.mechmat.2010.09.003
  119. Catalanotti, G.; Camanho, P.P.; Xavier, J.; Dávila, C.G.; Marques, A.T.. "Measurement of resistance curves in the longitudinal failure of composites using digital image correlation". Composites Science and Technology 70 13 (2010): 1986-1993. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956930796&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.07.022
  120. Xavier, J.; Oliveira, M.; Morais, J.; Pinto, T.. "Measurement of the shear properties of clear wood by the Arcan test". Holzforschung 63 2 (2009): 217-225. http://www.scopus.com/inward/record.url?eid=2-s2.0-59449110789&partnerID=MN8TOARS.
    10.1515/HF.2009.034
  121. Xavier, J.; Avril, S.; Pierron, F.; Morais, J.. "Variation of transverse and shear stiffness properties of wood in a tree". Composites Part A: Applied Science and Manufacturing 40 12 (2009): 1953-1960. http://www.scopus.com/inward/record.url?eid=2-s2.0-71949125702&partnerID=MN8TOARS.
    10.1016/j.compositesa.2009.09.023
  122. Xavier, José. "Characterisation of the radial variability of stiffness parameters of P. pinaster by the virtual fields method". Mecânica Experimental 16 (2008): 89-98.
    Published
  123. Xavier, J.; Avril, S.; Pierron, F.; Morais, J.. "Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test". Holzforschung 61 5 (2007): 573-581. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547725215&partnerID=MN8TOARS.
    10.1515/HF.2007.083
  124. Xavier, José. "Estudo numérico e experimental do método do vão variável para a identificação das propriedades elásticas da madeira". Mecânica Experimental 14 (2007): 59-65.
    Published
  125. Xavier, J.C.; Garrido, N.M.; Oliveira, M.; Morais, J.L.; Camanho, P.P.; Pierron, F.. "A comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait". Composites Part A: Applied Science and Manufacturing 35 7-8 (2004): 827-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-2342485996&partnerID=MN8TOARS.
    10.1016/j.compositesa.2004.01.013
  126. Xavier, José. "Identification of elastic prop- erties of orthotropic materials using evolutionary algorithms". Mecânica Experimental 6 (2001): 45-56.
    Published
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2025/09/01 - Current Les bois pour la mobilité: comportements mécaniques et durabilité
Co-supervisor
Université Clermont Auvergne, France
2021/09/01 - Current A neglected transitional zone: study of C2-C3 intervertebral disc space and its relationship with post-operative neck pain
Supervisor
 3º Ciclo de Estudos em Investigação Clínica e em Serviços de Saúde (PhD)
2020/09/01 - 2026/12/13 Determinação de factores associados com o aumento do diâmetro aórtico na doença aneurismática da aorta ascendente
Co-supervisor
 Programa Doutoral em Medicina da NOVA Medical School (PhD)
Universidade Nova de Lisboa Faculdade de Ciências Médicas, Portugal
2022/10/01 - 2025/12/19 Enhancement of functionally graded material created by multi-feed wire and arc additive manufacturing using a full-field identification method
Supervisor
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/09/01 - 2025/12/12 Digital twin development in metal forming: calibration aided by digital image correlation and artificial intelligence.
Co-supervisor
Universidade de Aveiro, Portugal
2021/04/01 - 2025/10/23 A computational and deep learning framework for fluid-structure interaction in ascending thoracic aortic aneurysms
Supervisor
 Plano Doutoral Engenharia Mecânica (PhD)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2025/06/01 - 2025/08/25 Virtual–experimental approach for high-value functional gradient materials in additive manufacturing
Supervisor
 National Gra-duate Engineering School of Mechanics and Aeronautics (Scientific initiation)
ISAE-ENSMA, France
2024/03/01 - 2024/11/06 Simulação numérica da influência dos suportes dos intercooler durante a bra sagem em atmosfera controlada
Supervisor
 Engenharia de Fabrico Digital Avançado (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2024/03/01 - 2024/11/06 Numerical Simulation & Experimental Validation of Potting Process: Epoxy Case Study in Moldex3D
Supervisor
 Engenharia de Fabrico Digital Avançado (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2020/01/02 - 2024/10/18 Análisis de la resistencia al hendido de uniones con clavijas en madera de frondosas cargadas perpendicularmente a las fibras bajo el enfoque de la mecánica de fractura
Co-supervisor
Universidad Politécnica de Madrid, Spain
2024/02/01 - 2024/06/28 Evaluation of fracture properties of wood using image-based simulation tests
Co-supervisor
Université Clermont Auvergne, France
2023/02/01 - 2023/11/29 Inverse parameter identification from biaxial tests on soft tissues.
Supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Departamento de Engenharia Mecânica e Industrial, Portugal
2023/02/01 - 2023/06/30 Mixed-mode fracture of European and tropical wood coupled with digital image correlation
Supervisor
Université Clermont Auvergne Polytech Clermont, France
2022/11/01 - 2023/05/30 Simulação numérica de propagação de fenda por fadiga em provete normalizado através do programa computacional Abaqus
Co-supervisor
 NOVA School of Science and Technology, Universidade NOVA de Lisboa (Master)
2022/03/01 - 2022/11/29 Prediction of the rupture risk of a neo-hookean material submitted to an inflation test: a finite element simulation coupled with a linear regression machine learning approach
Supervisor
2019/07/01 - 2022/10/10 Fracture investigation of silicone-based soft composites using a low-cost digital image correlation system
Co-supervisor
Universidade Federal Fluminense, Brazil
2021/11/01 - 2022/03/19 Projeto de dispositivo de ensaio e identificação inversa de peça anatómica de tecido da aorta ascendente
Supervisor
2021/03/01 - 2022/03/03 Design of a testing device for an anatomical part of the ascending aorta
Supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/02/28 - 2022/02/28 Sobre a definição do processo de simulação do comportamento mecânico da Aorta Torácica Ascendente
Co-supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/03/01 - 2022/02/01 Visualização do desenvolvimento da camada solidificada na moldagem por injeção: uma contribuição para a síntese numérica de imagem
Co-supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/03/01 - 2021/12/22 Estudo numérico da interação fluido-estrutura na aorta ascendente aneurismática
Co-supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/03/01 - 2021/12/16 Dinâmica inversa 2D do salto vertical em coordenadas relativas e naturais
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro Escola de Ciências e Tecnologia, Portugal
2021/03/03 - 2021/10/21 Identificação do comportamento da madeira de Pinus pinaster Ait. submetido a um ensaio de impacto inercial pelo método dos campos virtuais
Supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/03/01 - 2021/06/30 Damage of European and tropical wood under various environments
Supervisor
Université Clermont Auvergne Polytech Clermont, France
2020/03/01 - 2020/11/18 Caracterização do comportamento mecânico de material obtido por fabrico aditivo pela técnica de correlação digital de imagem
Supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa, Portugal
2020/01/02 - 2020/09/30 Artrodese da coluna: simulação numérica da área mínima de contacto de espaçadores do tipo interfuse S
Supervisor
 Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2019/10/01 - 2020/07/01 Deflectometry techniques for OSB products
Co-supervisor
 Engenharia Mecânica (Master)
Università Politecnica delle Marche Facoltà di Ingegneria, Italy
2019/02/01 - 2019/11/27 Simulação numérica de uma palmilha pediátrica específica do paciente
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2019/02/01 - 2019/11/27 Análise do comportamento à compressão da madeira no plano longitudinal-radial recorrendo ao ensaio em barra de pressão de Hopkinson
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2019/01/02 - 2019/11/27 Simulação de redes de gás
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2019/02/01 - 2019/11/25 Identificação de propriedades elásticas da madeira à escala dos anéis de crescimento por um método de elementos finitos iterativo
Supervisor
 Engenharia Mecânica
Universidade de Trás-os-Montes e Alto Douro, Portugal
2019/03/01 - 2019/11/14 High strain rate identification of Pinus pinaster Ait. on the transverse plane by the image-based inertial impact test
Supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2019/01/02 - 2019/05/24 Análise do comportamento à compressão do Pinus Pinaster Ait no plano transversal usando a barra de pressão de Split-Hopkinson
Supervisor
 Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2016/01/02 - 2019/01/28 Estudo de caracterização da artroplastia cervical – características bimecânicas in vivo
Co-supervisor
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/02/01 - 2018/11/27 Comportamento elástico do tecido ósseo usando o ensaio de Arcan modificado
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2018/02/01 - 2018/11/27 Análise do comportamento da madeira submetido a um ensaio de impacto inercial pelo método dos campos virtuais
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2018/02/01 - 2018/11/27 Modelação por elementos finitos do comportamento estrutural de um perfil de asa de planador/ultraleve
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2018/02/01 - 2018/11/27 Desenvolvimento de um equipamento individual de proteção para a prevenção de lombalgia
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2015/01/02 - 2018/05/12 Mechanical characterisation of biodegradable scaffolds for ligament repair
Co-supervisor
 Engenharia Mecânica
Universidade do Porto Faculdade de Engenharia, Portugal
2017/02/01 - 2017/11/27 Caracterização da rigidez à flexão da madeira através do método dos campos virtuais: optimização e identifiabilidade
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2017/02/01 - 2017/11/27 Artroplastia de discos inter-vertebrais: quantificação do movimento fisiológico da coluna cervical por análise de imagem
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2017/02/01 - 2017/11/27 Comportamento biomecânico da cereja
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2016/02/01 - 2016/11/27 Estudo do comportamento à fratura da madeira em modo II e à escala meso
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2016/02/01 - 2016/11/27 Estudo numérico e experimental do comportamento à fadiga do tecido ósseo cortical sob solicitação de modo I
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2016/02/01 - 2016/11/27 Análise cinemática e dinâmica do salto vertical
Co-supervisor
 Mestrado em Engenharia Mecânica
Universidade de Trás-os-Montes e Alto Douro, Portugal
2016/02/01 - 2016/11/27 Identificação numérica e experimental das propriedades elásticas do tecido ósseo cortical à escala do órgão
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2013/01/02 - 2016/07/01 Bond behaviour of NSM CFRP-concrete systems: durability and quality control
Co-supervisor
2015/02/02 - 2015/11/27 Caracterização do comportamento elástico da madeira no plano transversal através de métodos inversos
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2015/02/01 - 2015/11/27 Comportamento mecânico de adesivos estruturais.
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2014/02/01 - 2014/11/27 Estudo sobre as ligações em Estruturas de Madeira do passado para o futuro: caso de estudo Casa da Quinta da Tranqueira
Co-supervisor
 Mestrado em Engenharia Civil (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2014/02/01 - 2014/11/27 Caracterização numérica e experimental de ligações aparafusadas de madeira
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2014/02/01 - 2014/11/27 Identificação do compotamento ao corte do tecido ósseo cortical usando correlação digital de imagem
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2014/02/01 - 2014/11/27 Identificação da matriz de rigidez à flexão da madeira de pinus pinaster através do método dos campos virtuais
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2013/02/01 - 2013/11/27 Efeito de escala em provetes de geometria TDCB: Comportamento da Curva-R e análise assimptótica
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2013/02/01 - 2013/11/27 Fratura do tecido ósseo cortical de bovino jovem em modo misto para o ensaio SLB
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2013/02/01 - 2013/11/27 Caracterização da madeira de Pinus pinaster à fratura em modo I à escala dos anéis de crescimento
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2013/02/01 - 2013/11/27 Determining radial and tangential shrinkage coefficients of wood by standard and digital image correlation methods
Co-supervisor
 Mestrado Integrado em Engenharia Civil (Master)
Universidade do Minho - Campus de Azurém, Portugal
2013/02/01 - 2013/11/27 Caracterização de propriedades elásticas de painéis MDF através do método das grelhas
Supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2010/06/01 - 2013/06/17 Assessing wood quality by spatial variability of transverse elastic properties within the stem: Case study on P. pinaster at the meso scale
Supervisor
Universidade da Beira Interior, Portugal
2012/02/01 - 2012/11/27 Caracterização de parâmetros de fratura de um epóxido usando correlação digital de imagem
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2012/02/01 - 2012/11/27 Identificação das propriedades elásticas do tecido ósseo cortical usando o ensaio de Arcan
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2010/02/01 - 2010/11/27 Bases para o projeto de conservação, restauro e reabilitação de edifícios antigos: estudos sobre Quinta do Concelho de Guimarães
Co-supervisor
 Mestrado em Engenharia Civil (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2009/02/01 - 2009/11/27 Estudo do envelhecimento físico de um polímero estrutural
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade de Trás-os-Montes e Alto Douro, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2024/12/18 2D and 3D Sustainable Technologies for the Production of Cardiovascular Stents
Thesis Member
 Ana Micaela Barbosa de Sousa (PhD)
Universidade de Coimbra, Portugal
2024/12/13 Towards virtual forming and design: data-driven mate- rial modelling using Machine Learning techniques and physics-based constraints
Thesis Member
 Rúben Miguel Borges Lourenço (PhD)
Universidade de Aveiro UACOOPERA, Portugal
2024/01/05 Towards Material Testing 2.0: thermomechanical characterization of steels through inverse methods.
(Thesis) Arguer
 Luca Morichelli (PhD)
Università Politecnica delle Marche, Italy
2022/10/10 Fracture investigation of silicone-based soft composites using a low-cost digital image correlation system
Supervisor
 João Carlos Andrade de Deus Filho (PhD)
Universidade Federal Fluminense, Brazil
2022/07/15 Topology optimization of high-strain capable damage tolerant composite structures.
(Thesis) Main arguer
 Pedro Nuno Martins Fernandes (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2022/02/22 Innovative contributions on calibration methodologies towards reliable microflow measurements.
Thesis Member
 Elsa Maria Isqueiro Batista. (PhD)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/05/27 High Strain Rate Behavior of Aerospace Materials
(Thesis) Main arguer
 Sahand Pourhassan Shamchi (PhD)
2020/05/11 Study of cortical bone fracture behaviour under fatigue loads
(Thesis) Main arguer
 Filipe Gonçalo Andrade da Silva (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2020 Deformation monitoring of high-speed rotating targets
(Thesis) Main arguer
 Pedro José da Silva Carvalho Pereira de Sousa (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2020 Calibration of thermo-mechanical constitutive models for sheet metals from full-field measurements
(Thesis) Arguer
 João Miguel Martins (PhD)
2020 Desenvolvimento e caracterização físico-mecânica de OSB com resíduos de espécies de madeira provenientes da região norte do Brasil
(Thesis) Main arguer
 Isabella Imakawa de Araújo (PhD)
2019/09/02 Identification of constitutive models for cutting simulation of AlSi9Cu3 cast alloy by mechanical testing
(Thesis) Main arguer
 Soumitra Gain (PhD)
2019/09/01 Innovative methodology for railway tunnel inspection.
(Thesis) Main arguer
 Behzad Vasheghani Farahani (PhD)
2019/05/02 Analysis of dynamic compressive fracture of carbon composites by digital image correlation and Machine Learning.
(Thesis) Arguer
 Rafael de Azevedo Cidade (PhD)
Universidade Federal do Rio de Janeiro, Brazil
2018/09/01 Deformation Behaviour of Semi Crystalline Polymers under Different Stress States
(Thesis) Main arguer
 João Pedro Manaia (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2017/04/02 Comportamento mecânico da madeira sob solicitações de modo misto I+II
(Thesis) Main arguer
 Jorge Marcelo Quintas de Oliveira (PhD)
Universidade da Beira Interior, Portugal
2016/09/02 Analysis of composite bolted joints under out-of-plane loads and extreme temperatures.
(Thesis) Main arguer
 Ricardo Fernando Rodrigues Pinto. (PhD)
2016/06/01 Bond behaviour of NSM CFRP-concrete systems: durability and quality control
Supervisor
 Pedro Miguel Gomes Fernandes (PhD)
Universidade do Minho, Portugal
2016/05/26 Structural Mechanics of Thin-Ply Laminated Composites
(Thesis) Arguer
 Albertino Arteiro (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 Bond behaviour of NSM CFRP-concrete systems: durability and quality control
(Thesis) Arguer
 João Carlos Rego Pereira (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2015/05/02 Identification of cohesive laws of cortical bone under mode I, mode II and mixed-mode I+II
(Thesis) Main arguer
 Fábio André Magalhães Pereira (PhD)
2015/02/15 Madera termotratada de frondosa para uso estructural.
(Thesis) Arguer
 Almudena Majano-Majano (PhD)
Universidad Politécnica de Madrid Escuela Técnica Superior de Ingenieros de Montes Biblioteca, Spain
2013/03/27 Assessing wood quality by spatial variability of transverse elastic properties within the stem: Case study on P. pinaster at the meso scale
Supervisor
 José Luís Pereira (PhD)
Universidade da Beira Interior, Portugal
2011/07/12 Measurement of displacement fields based on digital image correlation and differential techniques
(Thesis) Arguer
 António Manuel Ribeiro de Sousa (PhD)
Universidade de Trás-os-Montes e Alto Douro, Portugal
2011/07/07 Mécanique et mécanismes de rupture dans le plan transverse du bois résineux
Supervisor
 Loane Bigorgne (PhD)
Institut National des Sciences Appliquées de Lyon Bibliothèque Marie Curie, France

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2024/09/10 - 2025/12/10 Technical Drawing Engenharia Física (Licenciatura) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2019/03/02 - 2025/06/18 Desenho Assitido por Computador | Computer Aided Design Mestrado Integrado Engenharia Mecânica (Mestrado integrado) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2025/03/06 - 2025/06/06 Fatigue Design of Mechanical Joints and Aerospatial Structures Engenharia Aeroespacial (Mestrado integrado) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2020/09/14 - 2024/01/26 Mecânica Aplicada I | Applied Mechanics I Mestrado Integrado em Engenharia Mecânica (Ensino básico 1º ciclo) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2021/09/13 - 2024/01/12 Mecânica dos Sólidos II | Solid Mechanics II Engenharia Mecânica (Mestrado integrado) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2019/09/14 - 2022/06/18 Mecânica dos Sólidos I | Solid Mechanics I Mestrado Integrado em Engenharia Mecânica (Licenciatura) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2018/09/24 - 2018/12/14 Desenho de Construção Mecânica | Mechanical Engineering Drawing Mestrado Integrado Engenharia Mecânica (Ensino básico 1º ciclo) Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Interview (tv / radio show)

Program Topic
2020/07/27 - 2020/07/27 90 segundos para a ciência Engenharia assistida por biomimética para a inovação e sustentabilidade
Distinctions

Other distinction

2007 Eng.a Cruz Azevedo
1999 Prize Fundação Engenheiro António de Almeida¿ for obtaining the highest classification in the academic year of 1998/99 in the course of Mechanical Engineering at the University of Trás-os-Montes e Alto Douro.
Universidade de Trás-os-Montes e Alto Douro, Portugal