Personal identification

Full name

António Mário Henriques Pereira

Citation names

• Pereira, A.M.
• Mário Pereira

Author identifiers

Ciência ID

3E1F-25F1-8519

ORCID iD

0000-0003-1219-0596

Languages

Language	Speaking	Reading	Writing	Listening	Peer-review
French	Intermediate (B1)	Intermediate (B1)	Intermediate (B1)	Intermediate (B1)
French	Intermediate (B1)	Intermediate (B1)	Intermediate (B1)	Intermediate (B1)
English	Beginner (A1)	Beginner (A1)	Intermediate (B1)	Intermediate (B1)

	Degree	Classification
2012/07/19 Concluded	Ciências da Engenharia (Doutoramento) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Comportamento Mecânico de Juntas Soldo-coladas / Mechanical behaviour of weld-bonded joints" (THESIS/DISSERTATION)	Approved with Distinction and Acclaim
2012/07/19 Concluded	Ciências da Engenharia (Mestrado) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Comportamento Mecânico de Juntas Soldo-coladas / Mechanical behaviour of weld-bonded joints" (THESIS/DISSERTATION)	Approved with Distinction and Acclaim
2012/07/18 Concluded	Engenharia Mecânica (Doutoramento) Major in Especialidade: Construção Mecânica Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Comportamento Mecânico de Juntas Soldo - Coladas" (THESIS/DISSERTATION)	Aprovado com Distinção e Louvor
1993/11/24 Concluded	MSc em Ciências da Engenharia Mecânica (Mestrado) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Application of Fracture Mechanics in Prediction of Strength of Fatigue Welded Joints" (THESIS/DISSERTATION)	Very Good
1993/11/24 Concluded	MSc em Ciências de Engenharia Mecânica (Mestrado) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Application of fracture Mechanics in Prediction of Strength of Fatigue Welded Joints" (THESIS/DISSERTATION)	Very Good
1993/11/24 Concluded	Ciências da Engenharia Mecânica (Mestrado) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Application of fracture Mechanics in Prediction of Strength of Fatigue of Welded Joints" (THESIS/DISSERTATION)	Very Good
1990 Concluded	Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal "Engenharia Mecânica - Ramo de Produção" (THESIS/DISSERTATION)	Good

Teaching in Higher Education

	Category Host institution	Employer
2001/09/02 - Current	Adjunct Teacher (Polytechnic Teacher)	Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2016 - 2018	Adjunct Teacher (Polytechnic Teacher)	Instituto Politécnico de Leiria, Portugal
2013 - 2016	Adjunct Teacher (Polytechnic Teacher)	Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
1996/10/01 - 2001/08/31	Invited Assistant (University Teacher)	Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1996/10/01 - 2001/08/31	Invited Assistant (University Teacher)	Universidade de Coimbra Faculdade de Ciências do Desporto e Educação Física, Portugal

Positions / Appointments

	Category Host institution	Employer
2017 - 2018	Conselho pedagógico	Instituto Politécnico de Leiria, Portugal
2016 - 2018	Coordenação ou direção de centro de investigação, departamento ou equivalente	Instituto Politécnico de Leiria, Portugal
2014 - 2016	Coordenação ou direção de centro de investigação, departamento ou equivalente	Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

Others

	Category Host institution	Employer
1993/01/01 - 2004/10/15	Director of the Laboratórios de Ensaios da ABIMOTA (LEA) (6 Laboratories)	ABIMOTA - Associação Nacional dos Industriais de Motociclos, Ciclomotores, Bicicletas e Acessórios, Portugal
1993/01/01 - 2004/10/15	Director of the Laboratórios de Ensaios da ABIMOTA (LEA) (6 Laboratories)	ABIMOTA - Associação Nacional dos Industriais de Motociclos, Ciclomotores, Bicicletas e Acessórios, Portugal
1993/01/01 - 1993/08/31	Responsible by the Installation of LEA (Laboratory of Metrologia, Materials, Surface, Chemical, ...	ABIMOTA - Associação Nacional dos Industriais de Motociclos, Ciclomotores, Bicicletas e Acessórios, Portugal

Contract

	Designation	Funders
2018/07/26 - 2021/07/25	Produção de componentes para veículos aéreos não tripulados (UAVs) por manufatura aditiva PTDC/EME-ESP/31296/2017 Universidade da Beira Interior, Portugal Instituto Politécnico de Leiria, Portugal Universidade de Coimbra, Portugal	Fundação para a Ciência e a Tecnologia Ongoing

Publications

Book	Pereira, António. High Value Manufacturing. United Kingdom. 2014.
Conference paper	Pereira, António. "Tensile-shearing strength in aluminium resistance spot weld and weldbonded joints". 2010.
Edited book	Pereira, António. Innovative Research in Virtual and Physical Prototyping. United Kingdom. 2012. Pereira, António. Innovative Developments in Design and Manufacturing. 2010.
Journal article	António M.H. Pereira; Miguel R. Silva; Mercedes A.G. Domingues; José C. Sá. "Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study". Quality Innovation Prosperity 23 3 (2019): 103-103. https://doi.org/10.12776/qip.v23i3.1334. 10.12776/qip.v23i3.1334 S.R.M. Coelho; P.N.B. Reis; J.A.M. Ferreira; A.M. Pereira. "Effects of external patch configuration on repaired composite laminates subjected to multi-impacts". Composite Structures 168 (2017): 259-265. https://doi.org/10.1016%2Fj.compstruct.2017.02.069. 10.1016/j.compstruct.2017.02.069 M.S.N. Figueiredo; A.M. Pereira. "Managing Knowledge – The Importance of Databases in the Scientific Production". Procedia Manufacturing 12 (2017): 166-173. https://doi.org/10.1016%2Fj.promfg.2017.08.021. 10.1016/j.promfg.2017.08.021 M. Silva; A.M. Pereira; N. Alves; A. Mateus; C. Malça. "A Hybrid Processing Approach to the Manufacturing of Polyamide Reinforced Parts with Carbon Fibers". Procedia Manufacturing 12 (2017): 195-202. https://doi.org/10.1016%2Fj.promfg.2017.08.024. 10.1016/j.promfg.2017.08.024 P. N. B. Reis; A. M. Pereira; J. A. M. Ferreira; J. D. M. Costa. "Cyclic creep response of adhesively bonded steel lap joints". The Journal of Adhesion 93 9 (2016): 704-715. https://doi.org/10.1080%2F00218464.2016.1146880. 10.1080/00218464.2016.1146880 A. M. Pereira; P. N. B. Reis; J. A. M. Ferreira. "Effect of the mean stress on the fatigue behaviour of single lap joints". The Journal of Adhesion 93 6 (2015): 504-513. https://doi.org/10.1080%2F00218464.2015.1110699. 10.1080/00218464.2015.1110699 P.N.B. Reis; J.R.L. Soares; A.M. Pereira; J.A.M. Ferreira. "Effect of adherends and environment on static and transverse impact response of adhesive lap joints". Theoretical and Applied Fracture Mechanics 80 (2015): 79-86. https://doi.org/10.1016%2Fj.tafmec.2015.07.004. 10.1016/j.tafmec.2015.07.004 P.N.B. Reis; J.F.R. Monteiro; A.M. Pereira; J.A.M. Ferreira; J.D.M. Costa. "Fatigue behaviour of epoxy-steel single lap joints under variable frequency". International Journal of Adhesion and Adhesives 63 (2015): 66-73. https://doi.org/10.1016%2Fj.ijadhadh.2015.08.008. 10.1016/j.ijadhadh.2015.08.008 Reis, P.N.B.; Ferreira, J.A.M.; Pereira, A.M.; Antunes, F.J.V.. "Influence of superposition length on transverse impact response of single-strap adhesive joints". Journal of Adhesion 90 1 (2014): 65-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886648526&partnerID=MN8TOARS. 10.1080/00218464.2013.797341 Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.. "Effect of saline environment on mechanical properties of adhesive joints". International Journal of Adhesion and Adhesives 47 (2013): 99-104. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888307917&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2013.08.002 Pereira, A.M.; Ferreira, J.A.M.; Antunes, F.V.; Bártolo, P.J.. "Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints". Journal of Adhesion Science and Technology (2012): 1-19. http://dx.doi.org/10.1080/01694243.2012.698107. 10.1080/01694243.2012.698107 Pereira, A.M.; Ferreira, J.M.; Loureiro, A.; Costa, J.D.M.; Bártolo, P.J.. "Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy". Materials and Design 31 5 (2010): 2454-2463. http://www.scopus.com/inward/record.url?eid=2-s2.0-76749090555&partnerID=MN8TOARS. 10.1016/j.matdes.2009.11.052 Pereira, A.M.; Ferreira, J.M.; Antunes, F.V.; Bártolo, P.J.. "Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints". Journal of Materials Processing Technology 210 4 (2010): 610-617. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349114944&partnerID=MN8TOARS. 10.1016/j.jmatprotec.2009.11.006 Pereira, A.M.; Ferreira, J.M.; Antunes, F.V.; Bártolo, P.J.. "Study on the fatigue strength of AA 6082-T6 adhesive lap joints". International Journal of Adhesion and Adhesives 29 6 (2009): 633-638. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349239350&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2009.02.009 Pereira, António. "The influence of manufacture parameters on the shear strenght of aluminium based spot welds". (2008): Pereira, A.M.; Bártolo, P.J.; Ferreira, J.M.; Antunes, F.. "Laminated Object Manufacturing with aluminium bonded sheets". Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping (2007): 597-601. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049085556&partnerID=MN8TOARS. Ferreira, J.M.; Pereira, A.H.; Branco, C.M.. "A fracture mechanics based fatigue life prediction for welded joints of square tubes". Thin-Walled Structures 21 2 (1995): 107-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028992851&partnerID=MN8TOARS.