???global.info.a_carregar???
Cristóvão Silva obtained the title of Agregado in Mechanical Engineering from the University of Coimbra in 2016/10. He holds a Doctorate in Mechanical Engineering (2000), a Master in Mechanical Engineering Sciences (1995) and a Bachelor in Mechanical Engineering (1992), all from the University of Coimbra. He is an Associate Professor at the University of Coimbra. He has published 53 articles in journals, 15 book chapters and several communications in international conferences. He has organised events and belonged to the scientific committee of several conferences. He has supervised 7 doctoral theses and co-supervised 5. He has supervised more than 200 master theses. Has received 1 award. He participated as principal investigator in 2 project(s) and was researcher in 9 project(s). Cristóvão Silva has been a reviewer for some of the leading journals in the field of Operations Management, such as the European Journal of Operational Research, the International Journal of Production Research or the International Journal of Production Economics, among others. He works in the field(s) of Engineering and Technology with a focus on Industrial Engineering. In his curriculum vitae, the most common terms related to scientific, technological and artistic-cultural production are Shop Floor Control; Production Planning; Order Review and Release; Decision Support System; Tool Wear; Lot Size Planning; Heuristics; Order Release; Workload Control; Case Study; Supply Chain Management and Smart Manufacturing.
Identification

Personal identification

Full name
Cristóvão Silva

Citation names

  • Silva, C.

Author identifiers

Ciência ID
3B19-A710-91B0
ORCID iD
0000-0002-7693-9570

Email addresses

  • cristovao.silva@dem.uc.pt (Professional)

Addresses

  • Universidade de Coimbra, Centro de Engenharia Mecânica da Universidade de Coimbra. DEM-FCTUC, Pólo II, Rua Luís Reis Santos - Pinhal de Marrocos, 3030-788, Coimbra, Portugal (Professional)

Knowledge fields

  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2016/10
Concluded
Mechanical Engineering (Título de Agregado)
Major in Industrial Management and Robotics
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
Unanimously approved
1995 - 2000
Concluded
PhD in Mechanical Engineering (Doutoramento)
Major in Industrial Management and Robotics
Universidade de Coimbra, Portugal
"A Decision Support System for Production Planning Using the Load Control Concept (SYCLOPP)" (THESIS/DISSERTATION)
Distinction and Praise
1995
Concluded
Mechanical Engineering Sciences (Mestrado)
Major in Industrial Management and Robotics
Universidade de Coimbra, Portugal
"Study of models used in assembly line balancing - Application to an industrial case" (THESIS/DISSERTATION)
Very Good
1987 - 1992
Concluded
Mechanical Engineering (Licenciatura)
Major in Production
Universidade de Coimbra, Portugal
14
Affiliation

Teaching in Higher Education

Category
Host institution
Employer
2020/11/01 - Current Associate Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra, Portugal
2000/11/01 - 2020/11/01 Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1995/03/01 - 2000/11/01 Assistant (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra, Portugal
1992/09/01 - 1995/02/01 Trainee Assistant (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra, Portugal
Projects

Contract

Designation Funders
2021/03/01 - 2024/03/01 FuturePharma: Pharmaceutical Supply Chain of the Future
PTDC/EME-SIS/6019/2020
Researcher
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2023/12/31 Warehouse of the Future (WOF): Novos sistemas inteligentes, conectados, flexíveis e eficientes para o armazém do futuro
POCI-01-0247-FEDER-077638
Researcher
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Ongoing
2020/01/01 - 2023/12/31 PRODUTECH 4 S&C: Produtech sustentável & circular
Researcher
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Ongoing
2016/11/01 - 2019/11/01 Aligning Manufacturing Decision Making with Advanced Manufacturing Technologies
POCI-01-0145-FEDER-016418
Researcher
Concluded
2015/03/01 - 2018/03/01 SM Weld – South Mediterranean Welding Centre for Education, Training and Quality Control
561786-EPP-1-2015-1-SE-EPPKA2-CBHE-JP
Researcher
Erasmus Plus
2016/02/01 - 2018/02/01 ColRobot: Collaborative Robotics for Assembly and Kitting in Smart Manufacturing
Projeto Europeu H2020, nº 688807
Researcher
2013/06/01 - 2014/06/01 Two-in-One - Para uma Geometria Apenas Dependente da Funcionalidade do Produto – Um Material: Dois Tamanhos de Grão, um Processo: Duas Tecnologias
Projecto I&DT Empresas/Projetos em co-promoção, nº 34030
Researcher
Agência Nacional de Inovação SA
Concluded
2002/03/01 - 2005/03/01 MAPP-Moldes: Models and Algorithms for Production Planning and Lead Time Management in Mould Industry
Principal investigator
Universidade de Coimbra, Portugal
Universidade do Algarve Faculdade de Ciências e Tecnologia
Concluded
2000/01/01 - 2001/01/01 Sistemas Avançados de Organização e Gestão Industrial
SAOGI
Researcher
Agência Nacional de Inovação SA
Concluded
1997/01/01 - 2001/01/01 Planeamento Logístico Integrado
PRAXIS XXI 3/3.1/CEG/2662/95
Researcher
Concluded

Other

Designation Funders
2022/10/01 - 2026/12/30 FactoryLab
XXX
Principal investigator
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Ongoing
Outputs

Publications

Book chapter
  1. Zapata, S.M.; Klement, N.; Silva, C.; Gibaru, O.; Silva, C.. "Collective Intelligence Application in a Kitting Picking Zone of the Automotive Industry". 2023.
    10.1007/978-3-031-15928-2_36
  2. Malaguti, Roney; Lourenço, Nuno; Silva, C.. "Wear and Tear: A Data Driven Analysis of the Operating Condition of Lubricant Oils". In Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems, 217-225. Springer International Publishing, 2021.
    10.1007/978-3-030-85914-5_23
  3. Malaguti, Roney; Lourenço, Nuno; Silva, Cristovão. "A Well Lubricated Machine: A Data Driven Model for Lubricant Oil Conditions". In Progress in Artificial Intelligence, 549-560. Springer International Publishing, 2021.
    10.1007/978-3-030-86230-5_43
  4. Coelho, Pedro; Silva, C.. Corresponding author: Coelho, Pedro. "A Distributed Model for Manufacturing Scheduling: Approaching the EDGE". In Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems, 416-423. Springer International Publishing, 2021.
    10.1007/978-3-030-85874-2_44
  5. Maganha, Isabela; Andersen, Ann-Louise; Silva, Cristovao; Ferreira, Luis Miguel D. F.. "A Classification of the Barriers in the Implementation Process of Reconfigurability". In Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems, 88-95. Springer International Publishing, 2021.
    10.1007/978-3-030-90700-6_9
  6. Klement, N.; Silva, C.. "A generic decision support tool to planning and assignment problems: Industrial applications and industry 4.0". 167-192. 2020.
    10.1007/978-3-030-43177-8_9
  7. Silva, Cristovao; Klement, Nathalie; Gibaru, Olivier; Silva, C.. "A Generic Decision Support Tool for Lot-Sizing and Scheduling Problems with Setup and Due Dates". In Closing the Gap Between Practice and Research in Industrial Engineering, 131-138. Springer International Publishing, 2018.
    10.1007/978-3-319-58409-6_15
  8. Silva, Cristóvão. "Uma abordagem DMAIC para a redução de defeitos em componentes para a indústria automóvel". In Lean na Prática, 112-126. Global South Press Inc TM, 2018.
    Published
  9. Ferreira, Luís Miguel D. F.; Arantes, Amílcar; Silva, Cristóvão. "Managing Service Parts for Discontinued Products: An Action Research Approach". In Communications in Computer and Information Science, 210-223. Springer International Publishing, 2018.
    10.1007/978-3-319-94767-9_11
  10. Silva, Cristóvão; Vaz, Paulo; Silva, C.. "Establishing a Link Between Lean Practices and Corporate Sustainability". In Lecture Notes in Management and Industrial Engineering, 157-165. Springer International Publishing, 2017.
    Published • 10.1007/978-3-319-45748-2_17
  11. Silva, C.; Ferreira, L. M. D. F.; Azevedo, S. G.; Silva, C.. "Proposal of a Framework for Assessing Environmental Performance of Supply Chains". In Lecture Notes in Management and Industrial Engineering, 215-223. Springer International Publishing, 2017.
    10.1007/978-3-319-45748-2_23
  12. Klement, Nathalie; Silva, Cristóvão; Gibaru, Olivier. "Solving a Discrete Lot Sizing and Scheduling Problem with Unrelated Parallel Machines and Sequence Dependent Setup Using a Generic Decision Support Tool". In Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing, 459-466. Springer International Publishing, 2017.
    10.1007/978-3-319-66923-6_54
  13. Ferreira, Luis Miguel D. F.; Silva, Cristóvao. "Integrating Sustainability Metrics in the Supply Chain Performance Measurement System". In Multiple Helix Ecosystems for Sustainable Competitiveness, 113-132. Switzerland: Springer International Publishing, 2016.
    Published • 10.1007/978-3-319-29677-7_8
  14. Corrêa, Igor Matheus; Correr, Ivan; Franciscato, Lucas Scavariello. "Melhoria de um processo logístico de reabastecimento interno recorrendo à metodologia DMAIC". In Qualidade em Acção: Da teoria para a prática, da prática para a excelência, 241-264. Portugal: Edições Sílabo, 2014.
    Published
  15. Ferreira, L.M.D.F.; Silva, C.; Mesquita, C.; Schwulera, Erik. "Using the six sigma DMAIC methodology to improve an internal logistic process". In Advanced in Sustainable and Competitive Manufacturing Systems, 1461-1473. Heidelberg, Switzerland: Springer, 2013.
    Published • 10.1007/978-3-319-00557-7_118
Conference abstract
  1. Paulo Nascimento; Samuel Moniz; Cristóvão Silva; Stefani Mueller. "Nesting and scheduling for additive manufacturing: an approach considering order due dates". Paper presented in IO’2021, 21º Congresso da APDIO, Figueira da Foz, 2021.
    Published
  2. Márcia Dias; Samuel Moniz; Nuno Lourenço; Cristóvão Silva. "Identifying and predicting web breaks in a tissue paper machine: a machine learning approach". Paper presented in IO’2021, 21º Congresso da APDIO, Figueira da Foz, 2021.
    Published
  3. Catarina Bessa; Raquel Duque; Alexandre Jesus; Cristóvão Silva; Samuel Moniz. "Capacity allocation considering fairness metrics: a pharmaceutical supply chain case study". Paper presented in IO’2021, 21º Congresso da APDIO, Figueira da Foz, 2021.
    Published
  4. Silva, Cristovao; Suspiro José; Moniz Samuel; Antunes Carlos Henggeler; Pinto-Varela Tânia; Barbosa-Povoa, Ana. "Using discrete-event simulation to model chemical processes". Paper presented in IO’2019, 20º Congresso da APDIO, Tomar, 2019.
    Published
  5. Silva, Cristovao; Amaral Mariana; Rui Trindade; Samuel Moniz; Jorge Pinho de Sousa. "Dimensionamento e escalonamento de lotes de produção numa unidade fabril de injeção de plásticos". Paper presented in IO’2019, 20º Congresso da APDIO, Tomar, 2019.
    Published
  6. Isabela Maganha; Cristóvão Silva; Samuel Moniz. "Leveraging the reconfigurability of assembly lines through mobile collaborative robots". Paper presented in IO’2019, 20º Congresso da APDIO, Tomar, 2019.
    Published
  7. Silva, Cristovao; Coelho, Pedro; Klement, Nathalie; Porto Leonardo. "A multi-criteria genetic algorithm approach to develop workers rotation programs". Paper presented in IO’2018, 19º Congresso da APDIO, Aveiro, 2018.
    Published
  8. Silva Cristóvão; Maganha Isabela; Klement Nathalie. "An hybrid methodology for job scheduling on a reconfigurable assembly line". Paper presented in IO’2018, 19º Congresso da APDIO, Aveiro, 2018.
    Published
  9. Silva, C.; Ribeiro, J.B.; Mendes, R.. "A simulation/optimization methodology to estimate the parameters of material models for a finite element simulator". Paper presented in Optimization 2011, Caparica, Portugal, 2011.
    Published
  10. Ribeiro, J.B.; Silva, C.; Mendes, R.. "Reactive Flow Model Parameters Estimation Using Genetic Algorithm-Based Inverse Analysis". Paper presented in The Seventh Biennial International Conference New Models and Hydrocodes for Shock Wave Processes in Condensed Matter, Lisboa, Portugal, 2008.
    Published
  11. Silva, C.; Ribeiro, J.B.. "A genetic algorithm with real value coding to optimize the constitutive equations of an explosive for industrial applications". Paper presented in Sixth International Conference on Optimization, Porto, Portugal, 2007.
    Published
  12. Silva, C.; Ribeiro, J.B.; Vicente, R.. "Optimização dos parâmetros da equação de estado de um explosivo para aplicação industrial". Paper presented in IO’2006, 12º Congresso da APDIO, Lisboa, 2006.
    Published
  13. Silva, C.; Roque, L.. "MAPP ¬ Um sistema de apoio à decisão para a indústria dos moldes". Paper presented in IO’2004, 11º Congresso da APDIO, Porto, 2004.
    Published
  14. Silva, C.; Joaquim, J.P.. "Planeamento da produção na unidade de “spinning” de uma empresa que fabrica fibras sintéticas". Paper presented in IO’2004, 11º Congresso da APDIO, Porto, 2004.
    Published
  15. Silva, C.; Themido, I.H.. "Um Sistema de Apoio à Decisão para o Planeamento da Produção Recorrendo ao Conceito de Controlo de Carga". Paper presented in IO’2000, 9º Congresso da APDIO, Setúbal, 2000.
    Published
  16. Silva, C.; Themido, I.H.; Kingsman, B.. "Workload Control – An Effective Way to Control Manufacturing Lead-Times for an Hybrid Job-Shop System". Paper presented in 10th Annual Meeting of the Production and Operations Management society, Charleston, USA, 1999.
    Published
  17. Silva, C.; Themido, I.H.. "Utilização do Controlo Input/Output para Gerir Lead Times em Sistemas Produtivos de Tipo Job-Shop – Um Caso de Estudo". Paper presented in IO’98, 8º Congresso da APDIO, Faro, 1998.
    Published
  18. Silva, C.; Dias, A.M.; Barral, M.. "Medição das temperaturas no corte por arranque de apara". Paper presented in Materiais 93, Porto, 1993.
    Published
Conference paper
  1. Aichouni, A.B.E.; Ferreira, L.M.D.F.; Silva, C.. "Total Quality Management Philosophy Within the Fourth Industrial Revolution Towards Sustainability: A State-of-The-Art Literature Review and A Proposed Protocol for Further Research". 2022.
  2. Lopes, B.; Fernandes, N.O.; Pinto Ferreira, L.; Silva, F.J.G.; Silva, C.; Carmo-Silva, S.. "POLCA vs. RF-POLCA: Performance Assessment by Simulation". 2022.
    10.1016/j.ifacol.2022.10.186
  3. Magalhães, Vanessa; Ferreira, Luis Miguel D. F.; Silva, Cristóvão. Corresponding author: Magalhães, Vanessa. "Identifying the causes of food loss and waste in the Brazilian Beef Supply Chain". Paper presented in icRS 2021, The International Conference on Resource Sustainability, Dublin, 2021.
    Published
  4. Roney Malaguti; Nuno Lourenço; Cristóvão Silva. "Um modelo de aprendizagem supervisionado para a determinação das condições de operação de óleos lubrificantes". Paper presented in 16º Congresso Nacional de Manutenção, Aveiro, 2021.
    Published
  5. Vanessa Magalhães; Luis Miguel Ferreira; Cristóvão Silva. "A Framework to Reduce Food Loss and Waste along Food Supply Chains". Paper presented in 28th EurOMA Conference, 2021.
    Published
  6. Vanessa Magalhães; Luis Miguel Ferreira; Cristóvão Silva. "Food Loss and Waste: A Systematic Literature Review of Mitigation Strategies". Paper presented in icRS 2021, The International Conference on Resource Sustainability, Dublin, 2021.
    Published
  7. Pedro Coelho; Jorge Landeck; Cristóvão Silva. "Industry 5.0: A concept overview". Paper presented in ProDPM’2021, Progress in Digital and Physical Manufacturing, Leiria, 2021.
    Published
  8. Pedro Coelho; Cristóvão Silva. "Manufacturing scheduling on multi-core single-board computers". Paper presented in ProDPM’2021, Progress in Digital and Physical Manufacturing, Leiria, 2021.
    Published
  9. Pinto, Ana; Sousa, Sonia; Silva, Cristóvão; Coelho, Pedro. "Adaptation and validation of the HCTM Scale into Human-robot interaction Portuguese context". Paper presented in NordiCHI'20, Tallin, 2020.
    Published • 10.1145/3419249.3420087
  10. Silva, C.. "A proposal of a framework methodology for the prioritization of food loss and waste mitigation strategies". Paper presented in EurOMA 2020, 2020.
  11. Pinto, A.; Ramos, P.N.; Carvalho, C.; Silva, C.. "Do future engineers trust cobots?". Paper presented in 4th International Conference of the Portuguese Society for Engineering Education, 2020.
    10.1109/CISPEE47794.2021.9507225
  12. Silva, C.. "Parallel microevolutionary genetic algorithm for Flexible Job Shop Scheduling Problems". Paper presented in EVOSTAR 2020, 2020.
  13. Silva, C.; Maganha, I.; Silva, C.; Ferreira, L.M.D.F.; Thurer, M.; Frazzon, E.M.; Silvestri, M.. "Proposal of a reconfigurability índex using analytic network process". Paper presented in IEEE International Conference on Industrial Engineering and Engineering Management, Macau, 2019.
    Published • 10.1109/IEEM44572.2019.8978532
  14. Silva, C.. "Modelling the causes of food loss and waste in fresh food supply chains: An integrated ISM-MICMAC analysis". Paper presented in 26th EurOMA Conference, Helsinkia, 2019.
    Published
  15. Magalhães, V.S.M.; Ferreira, L.M.D.F.; Silva, C.; MARX-PIENAAR, NADENE; RAND, GERRIE DU; VILJOEN, ANNEMARIE; FISHER, HENNIE; et al. "Causes of food loss and waste: An analysis along the food supply chain". Paper presented in IJCIEOM 2018, 24th International Joint Conference on Industrial Engineering and Operations Management, Lisboa, 2019.
    Published • 10.1007/978-3-030-14969-7_15
  16. Silva, C.. "Reconfigurability and manufacturing systems operational performance: An Exploratory analysis". Paper presented in IJCIEOM 2018, 24th International Joint Conference on Industrial Engineering and Operations Management, Lisboa, 2018.
    Published
  17. Silva, C.. "Un Outil d’aide à la décision générique pour les problème de planification et d’ordonnancement : Application inudstrielle e usine du futur". Paper presented in 19ème Congrès de la Societée Française de Recherche Operationelle et d’aide à la Décision (ROADEF), Lorient, 2018.
    Published
  18. Magalhães, V.S.M.; Ferreira, L.M.D.; Silva, C.. "An overview on the research status of the problem of food loss and waste along food supply chains". 2017.
  19. Ferreira, L.M.D.F.; Arantes, A.; Silva, C.. "Discontinued products an empirical study of service parts management". 2017.
  20. Silva, C.. "Workload control with continuous pull and push releases of work". Paper presented in Nineteen International Working Seminar on Production Economics, Innsbruck, 2016.
    Published
  21. Silva, C.. "Measuring environmental performance of supply chains: A case study in the automotive industry". Paper presented in Eighteenth International Working Seminar on Production Economics, Innsbruck, 2014.
    Published
  22. Silva, C.. "Order release in a hybrid MTO-MTS two-stage production system". Paper presented in Eighteenth International Working Seminar on Production Economics, Innsbruck, 2014.
    Published
  23. Silva, C.; Thürer, M.; Stevenson, M.. "A case study of the successful implementation of Workload Control: A practitioner-led approach". Paper presented in Seventeenth International Working Seminar on Production Economics, Innsbruck, Austria, 2012.
    Published
  24. Thürer, M.; Stevenson, M.; Silva, C.; Land, M.; Filho, M.G.. "Controlled order release (OR) in two-level multi-stage job-shops: An assessment by simulation". Paper presented in POMS 23rd Annual Conference, Chicago, USA, 2012.
    Published
  25. Thürer, M.; Stevenson, M.; Silva, C.; Land, M.; Fredendall, L.. "Workload control due dates setting rules: The key to short and reliable lead times". Paper presented in Production and Operations Management Society (POMS) 22nd Annual Conference, Reno, USA, 2011.
    Published
  26. Ribeiro, J.B.; Silva, C.; Mendes, R.. "Estimation of the LEE-Tarver Reactive Flow Model Parameters for an Ammonium Nitrate Based Emulsion Explosive". Paper presented in 14th International Seminar New Trends in Research of Energetic Materials, Pardubice, República Checa, 2011.
    Published
  27. Ribeiro, J.B.; Silva, C.; Mendes, R.; Plaksin, I.; Campos, Jose. "Simulation of the detonation process of an ammonium nitrate based emulsion explosive using the lee-tarver reactive flow model". Paper presented in SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Chicago, Illinois, 2011.
    Published • 10.1063/1.3686332
  28. Silva, C.; Slaviano, K.; Tantardini, M.; Portioli Staudacher, A.. "Lean production implementation: A survey based comparison between Italian and Portuguese companies". Paper presented in Sixteenth International Working Seminar on Production Economics, Innsbruck, Austria, 2010.
    Published
  29. Silva, C.; Tantardini, M.; Portioli Staudacher, A.; Salviano, K.. "Lean production implementation: A survey in Portugal and a comparison of resutls with Italian, UK and USA companies". Paper presented in 17th Annual EurOMA Conference, Porto, Portugal, 2010.
    Published
  30. Thürer, M.; Silva, C.; Stevenson, M.. "Improving the applicabilty of Workload Control (WLC): The influence of sequence dependent set-up times on the performance of WLC in job shops". Paper presented in 17th Annual EurOMA Conference, Porto, Portugal, 2010.
    Published
  31. Ribeiro, J.B.; Silva, C.; Mendes, R.; Plaksin, I.. "Tools for optimal ammunition design: An ad hoc category B Project proposal". Paper presented in IMEMTS 2010, Munich, Alemanha, 2010.
    Published
  32. Silva, C.. "A reverse engineering methodology to set parameters for a workload control production planning concept". Paper presented in Fifteenth International Working Seminar on Production Economics, Innsbruck, Austria, 2008.
    Published
  33. Silva, C.; Joaquim, J.P.. "A Methodology to Allow a Decision Maker’s own Insight into Fibre Production planning and Scheduling". Paper presented in Fourteenth International Working Seminar on Production Economics, Innsbruck, Austria, 2006.
    Published
  34. Silva, C.; Magalhães, J.M.. "Production Planning in a Make-to-Order Environment: The Case of a Mould Manufacturer". Paper presented in Euroma-Poms 1st Joint International Conference, Como, Itália, 2003.
    Published
  35. Silva, C.; Ferreira, L.M.; Silva, Cristóvão; Ferreira, Luís Miguel. "MICROPLANO – A Scheduling Support System for the Plastic Injection Industry". Paper presented in 18th International Conference on CAD/CAM, Robotics and Factories of the Future, Porto, Portugal, 2002.
    Published
  36. Silva, C.. "A production planning methodology designed to meet logistics objectives". Paper presented in ELA (European Logistics Association) Doctorate Workshop, Monchy St. Eloi, França, 1999.
    Published
  37. Silva, C.; Themido, I.H.; Kingsman, B.. "Production Planning by Workload Control in a Medium Sized Industrial Company". Paper presented in 2nd World Manufacturing Congress, Duhram, Reino Unido, 1999.
    Published
  38. Silva, C.; Themido, I.H.. "Uma Revisão de Modelos Desenvolvidos para a Gestão Operacional e Integrada da Cadeia Logística". Paper presented in 1º Encontro Nacional de Engenharia e Gestão Industrial, Lisboa, 1997.
    Published
  39. Silva, C.. "Equilibagem de linhas de montagem – Um caso prático". Paper presented in XIII Cobem – II CIDIM/95, XIII Congresso Brasileiro e II Congresso Ibero Americano de Engenharia Mecânica, Belo Horizonte - Brasil, 1995.
    Published
Journal article
  1. João Maranha; Paulo Jorge Nascimento; Tomaz Alexandre Calcerano; Cristóvão Silva; Stefanie Mueller; Samuel Moniz. "A decision-support framework for selecting additive manufacturing technologies". Journal of Manufacturing Technology Management (2023): https://doi.org/10.1108/JMTM-02-2023-0047.
    10.1108/JMTM-02-2023-0047
  2. Roney Malaguti; Nuno Lourenço; Cristovão Silva. "A supervised machine learning model for determining lubricant oil operating conditions". Expert Systems (2023): https://doi.org/10.1111/exsy.13116.
    10.1111/exsy.13116
  3. Magalhães, Vanessa S.M.; Ferreira, Luís Miguel D.F.; Silva, Cristóvão. "Prioritising food loss and waste mitigation strategies in the fruit and vegetable supply chain: A multi-criteria approach". Sustainable Production and Consumption 31 (2022): 569-581. http://dx.doi.org/10.1016/j.spc.2022.03.022.
    10.1016/j.spc.2022.03.022
  4. Nathalie Klement; Mohamed Amine Abdeljaouad; Leonardo Porto; Silva, C.. "Lot-Sizing and Scheduling for the Plastic Injection Molding Industry—A Hybrid Optimization Approach". Applied Sciences (2021): https://www.mdpi.com/2076-3417/11/3/1202.
    10.3390/app11031202
  5. Magalhães, V.S.M.; Ferreira, L.M.D.F.; Silva, C.. "Causes and mitigation strategies of food loss and waste: A systematic literature review and framework development". Sustainable Production and Consumption 28 (2021): 1580-1599. http://www.scopus.com/inward/record.url?eid=2-s2.0-85121864814&partnerID=MN8TOARS.
    10.1016/j.spc.2021.08.004
  6. Magalhães, V.S.M.; Ferreira, L.M.D.F.; Silva, C.. "Using a methodological approach to model causes of food loss and waste in fruit and vegetable supply chains". Journal of Cleaner Production 283 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85092538164&partnerID=MN8TOARS.
    10.1016/j.jclepro.2020.124574
  7. Coelho, Pedro; Pinto, Ana; Moniz, Samuel; Silva, Cristovão; Coelho, P.; Pinto, A.; Moniz, S.; Silva, C.. "Thirty Years of Flexible Job-Shop Scheduling: A Bibliometric Study". Procedia Computer Science 180 (2021): 787-796. http://dx.doi.org/10.1016/j.procs.2021.01.329.
    10.1016/j.procs.2021.01.329
  8. Maganha, Isabela; Silva, Cristovao; Ferreira, Luis Miguel D.F.; Maganha, I.; Silva, C.; Ferreira, L.M.D.F.. "The sequence of implementation of reconfigurability core characteristics in manufacturing systems". Journal of Manufacturing Technology Management 32 2 (2020): 356-375. http://dx.doi.org/10.1108/jmtm-09-2019-0342.
    Published • 10.1108/jmtm-09-2019-0342
  9. Magalhães, Vanessa S.M.; Ferreira, Luís Miguel D.F.; César, Aldara da Silva; Bonfim, Renato Manzini; Silva, Cristóvão. "Food loss and waste in the Brazilian beef supply chain: an empirical analysis". The International Journal of Logistics Management 32 1 (2020): 214-236. http://dx.doi.org/10.1108/ijlm-01-2020-0038.
    10.1108/ijlm-01-2020-0038
  10. Thürer, Matthias; Stevenson, Mark; Aitken, James; Silva, Cristovao. "State-dependent service rates in make-to-order shops: an assessment by simulation". Operations Management Research (2020): http://dx.doi.org/10.1007/s12063-020-00149-w.
    10.1007/s12063-020-00149-w
  11. Maganha, Isabela; Silva, Cristovao; Ferreira, Luis Miguel D. F.. "The impact of reconfigurability on the operational performance of manufacturing systems". Journal of Manufacturing Technology Management 31 1 (2019): 145-168. http://dx.doi.org/10.1108/jmtm-12-2018-0450.
    10.1108/jmtm-12-2018-0450
  12. Maganha, Isabela; Silva, Cristovao; Ferreira, Luis Miguel D.F.; Silva, C.. "An analysis of reconfigurability in different business production strategies". IFAC-PapersOnLine 52 13 (2019): 1028-1033. http://dx.doi.org/10.1016/j.ifacol.2019.11.330.
    Published • 10.1016/j.ifacol.2019.11.330
  13. Maganha, Isabela; Silva, Cristovao; Klement, Nathalie; dit Eynaud, Amélie Beauville; Durville, Laurent; Moniz, Samuel; Silva, C.. "Hybrid optimisation approach for sequencing and assignment decision-making in reconfigurable assembly lines". IFAC-PapersOnLine 52 13 (2019): 1367-1372. http://dx.doi.org/10.1016/j.ifacol.2019.11.389.
    Published • 10.1016/j.ifacol.2019.11.389
  14. Maganha, I.; Silva, C.; Ferreira, L.M.D.F.. "The layout design in reconfigurable manufacturing systems: a literature review". International Journal of Advanced Manufacturing Technology 105 1-4 (2019): 683-700. http://www.scopus.com/inward/record.url?eid=2-s2.0-85070978530&partnerID=MN8TOARS.
    10.1007/s00170-019-04190-3
  15. Raimundo, A.M.; Oliveira, A.V.M.; Silva, C.. "Replacement costs of cold storage equipment for medical products of public healthcare establishments of European Union countries". Health Policy (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85053156327&partnerID=MN8TOARS.
    10.1016/j.healthpol.2018.09.002
  16. Thürer, M.; Fernandes, N.O.; Stevenson, M.; Silva, C.; Carmo-Silva, S.. "POLC-A: an assessment of POLCA’s authorization element". Journal of Intelligent Manufacturing (2018): 1-13. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045041524&partnerID=MN8TOARS.
    10.1007/s10845-018-1402-2
  17. Maganha, I.; Silva, C.; Ferreira, L.M.D.F.. "Understanding reconfigurability of manufacturing systems: An empirical analysis". Journal of Manufacturing Systems 48 (2018): 120-130. http://www.scopus.com/inward/record.url?eid=2-s2.0-85050717500&partnerID=MN8TOARS.
    10.1016/j.jmsy.2018.07.004
  18. Ferreira, L.M.D.F.; Magalhães, V.S.M.; Silva, C.; Silva, D.N.; Silva, C.. "Managing product variety: a case study on an industrial company". IFAC-PapersOnLine 51 11 (2018): 1517-1522. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052936157&partnerID=MN8TOARS.
    Published • 10.1016/j.ifacol.2018.08.283
  19. Coelho, P.; Silva, C.; Ferreira, L.M.; Franca, B.; Silva, C.. "Operational improvement of an industrial equipment rental system using discrete event simulation". IFAC-PapersOnLine 51 11 (2018): 478-483. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052864144&partnerID=MN8TOARS.
    Published • 10.1016/j.ifacol.2018.08.364
  20. Maganha, I.; Silva, C.. "A Theoretical Background for the Reconfigurable Layout Problem". Procedia Manufacturing 11 (2017): 2025-2033. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029885890&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.07.354
  21. Silva, C.; Klement, N.. "Solving a Multi-periods Job-shop Scheduling Problem using a Generic Decision Support Tool". Procedia Manufacturing 11 (2017): 1759-1766. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029868148&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.07.307
  22. Silva, C.; Ribeiro, V.; Coelho, P.; Magalhães, V.; Neto, P.. "Job Shop Flow Time Prediction using Neural Networks". Procedia Manufacturing 11 (2017): 1767-1773. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029837635&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.07.309
  23. Silva, N.; Ferreira, L.M.D.F.; Silva, C.; Magalhães, V.; Neto, P.. "Improving Supply Chain Visibility With Artificial Neural Networks". Procedia Manufacturing 11 (2017): 2083-2090. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029852015&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.07.329
  24. Klement, N.; Silva, C.; Gibaru, O.. "A Generic Decision Support Tool to Planning and Assignment Problems: Industrial Application & Industry 4.0". Procedia Manufacturing 11 (2017): 1684-1691. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029881585&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.07.293
  25. Thürer, M.; Stevenson, M.; Silva, C.; Qu, T.. "Drum-buffer-rope and workload control in High-variety flow and job shops with bottlenecks: An assessment by simulation". International Journal of Production Economics 188 (2017): 116-127. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017165610&partnerID=MN8TOARS.
    10.1016/j.ijpe.2017.03.025
  26. Fernandes, N.O.; Thürer, M.; Silva, C.; Carmo-Silva, S.. "Improving workload control order release: Incorporating a starvation avoidance trigger into continuous release". International Journal of Production Economics 194 (2017): 181-189. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009371922&partnerID=MN8TOARS.
    10.1016/j.ijpe.2016.12.029
  27. Silva, C.; Reis, V.; Morais, A.; Brilenkov, I.; Vaza, J.; Pinheiro, T.; Neves, M.; et al. "A comparison of production control systems in a flexible flow shop". Procedia Manufacturing 13 (2017): 1090-1095. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030844682&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.169
  28. Silva, C.; Ferreira, L.M.; Thürer, M.; Stevenson, M.. "Improving the logistics of a constant order-cycle kanban system". Production Planning and Control 27 7-8 (2016): 650-659. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962835363&partnerID=MN8TOARS.
    10.1080/09537287.2016.1165302
  29. Ferreira, L.M.D.F.; Silva, C.; Azevedo, S.G.. "An environmental balanced scorecard for supply chain performance measurement (Env_BSC_4_SCPM)". Benchmarking 23 6 (2016): 1398-1422. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979519599&partnerID=MN8TOARS.
    10.1108/BIJ-08-2013-0087
  30. Fernandes, Nuno O.; Silva, Cristóvão; Carmo-Silva, S.. "Order release in the hybrid MTO–FTO production". International Journal of Production Economics 170 Part B (2015): 513-520.
    Published • 10.1016/j.ijpe.2015.03.025
  31. Silva, Cristóvão; Stevenson, Mark; Thurer, Matthias. "A case study of the successful implementation of workload control". Journal of Manufacturing Technology Management 26 2 (2015): 280-296.
    Published • 10.1108/JMTM-10-2013-0144
  32. Thürer, Matthias; Stevenson, Mark; Silva, Cristovao; Land, Martin J.; Fredendall, Lawrence D.; Melnyk, Steven A.. "Lean Control for Make-to-Order Companies: Integrating Customer Enquiry Management and Order Release". Production and Operations Management 23 3 (2014): 463-476.
    Published • 10.1111/poms.12058
  33. Silva, Cristóvão; Vaz, Paulo; Ferreira, Luis Miguel; Silva, C.; Vaz, P.; Ferreira, L.M.. "The impact of Lean Manufacturing on environmental and social sustainability: a study using a concept mapping approach". IFAC Proceedings Volumes 46 24 (2013): 306-310. http://dx.doi.org/10.3182/20130911-3-br-3021.00080.
    Published • 10.3182/20130911-3-br-3021.00080
  34. Thürer, M.; Stevenson, M.; Silva, C.; Land, M.; Filho, M.G.. "Workload control and order release in two-level multi-stage job shops: an assessment by simulation". International Journal of Production Research 51 3 (2013): 869-882.
    Published • 10.1080/00207543.2012.676685
  35. Veiga, Germano; Silva, Cristovão; Araújo, Ricardo; Pires, Norberto; Siciliano, Bruno. "The ECHORD project proposals analysis – Research profiles, collaboration patterns and research topic trends". Expert Systems with Applications 40 17 (2013): 7132-7140.
    Published • 10.1016/j.eswa.2013.06.046
  36. Thürer, M.; Stevenson, M.; Silva, C.; Land, M.. "Towards an integrated workload control (WLC) concept: The performance of due date setting rules in job shops with contingent orders". International Journal of Production Research 51 15 (2013): 4502-4516. http://www.scopus.com/inward/record.url?eid=2-s2.0-84882449229&partnerID=MN8TOARS.
    Published • 10.1080/00207543.2013.774485
  37. Thürer, Matthias; Silva, Cristovao; Stevenson, Mark; Land, Martin. "Controlled order release: a performance assessment in job shops with sequence-dependent set-up times". Production Planning & Control 25 7 (2012): 603-615. http://dx.doi.org/10.1080/09537287.2012.735801.
    10.1080/09537287.2012.735801
  38. Thürer, M.; Stevenson, M.; Silva, C.; Land, M.; Fredendall, L.. "Workload Control and Order Release: A Lean Solution for Make-to-Order Companies". Production and Operations Management 21 5 (2012): 939-953.
    Published • 10.1111/j.1937-5956.2011.01307.x
  39. Thürer, M.; Stevenson, M.; Silva, C.; Huang, George. "The application of workload control in assembly job shops: an assessment by simulation". International Journal of Production Research 50 18 (2012): 5048-5062.
    Published • 10.1080/00207543.2011.631600
  40. Thürer, M.; Silva, C.; Stevenson, M.; Land, M.. "Improving the applicability of workload control (WLC): the influence of sequence-dependent set-up times on workload controlled job shops". International Journal of Production Research 50 22 (2012): 6419-6430.
    Published • 10.1080/00207543.2011.648275
  41. Thürer, M.; Huang, G.; Stevenson, M.; Silva, C.; Filho, M.G.. "The performance of Due Date setting rules in assembly and multi-stage job shops: An assessment by simulation". International Journal of Production Research 50 20 (2012): 5949-5965. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867362906&partnerID=MN8TOARS.
    Published • 10.1080/00207543.2011.638942
  42. Thürer, M.; Silva, C.; Stevenson, M.. "Optimising workload norms: the influence of shop floor characteristics on setting workload norms for the workload control concept". International Journal of Production Research 49 4 (2011): 1151-1171.
    Published • 10.1080/00207541003604836
  43. Thürer, M.; Stevenson, M.; Silva, C.. "Three decades of workload control research: a systematic review of the literature". International Journal of Production Research 49 23 (2011): 6905-6935.
    Published • 10.1080/00207543.2010.519000
  44. Ribeiro, J. B.; Silva, C.; Mendes, R.. "Estimation of the Reactive Flow Model Parameters for an Ammonium Nitrate–Based Emulsion Explosive Using Genetic Algorithms". Journal of Energetic Materials 28 sup1 (2010): 180-204. http://dx.doi.org/10.1080/07370652.2010.503673.
    Published • 10.1080/07370652.2010.503673
  45. Thürer, M.; Silva, C.; Stevenson, M.. "Workload control release mechanisms: from practice back to theory building". International Journal of Production Research 48 12 (2010): 3593-3617.
    Published • 10.1080/00207540902922810
  46. Ribeiro, J.B.; Mendes, R.; Silva, C.. "Reactive flow model parameter estimation using genetic algorithms". Propellants, Explosives, Pyrotechnics 35 3 (2010): 292-299. http://www.scopus.com/inward/record.url?eid=2-s2.0-77958552325&partnerID=MN8TOARS.
    Published • 10.1002/prep.200900048
  47. Silva, C.. "Combining ad hoc decision-making behaviour with formal planning and scheduling rules: a case study in the synthetic fibre production industry". Production Planning & Control 20 7 (2009): 636-648.
    Published • 10.1080/09537280903034321
  48. Silva, C.; Stevenson, M.. "Theoretical development of a workload control methodology: Evidence from two case studies". International Journal of Production Research 46 11 (2008): 3107-3131.
    Published • 10.1080/00207540601039791
  49. "Redução de tempos de ciclo no fabrico de protótipos de moldes". Revista Ibero-Americana de Engenharia Mecânica 12 (2008): 15-26.
    Published
  50. Silva, C.; Magalhães, J.M.. "Heuristic lot size scheduling on unrelated parallel machines with application in the textile industry". Computers & Industrial Engineering 50 1 (2006): 76-89.
    Published • 10.1016/j.cie.2006.01.001
  51. Silva, C.; Roque, L.; Almeida, A.. "MAPP - A web-based decision support system for the mould industry". DECISION SUPPORT SYSTEMS 42 (2006): 999-1014.
    Published • 10.1016/j.dss.2005.08.001
  52. "PHIL – Um Sistema de Apoio ao Loteamento e Sequenciamento da Produção de Fibras Sintéticas". Revista Ibero-Americana de Engenharia Mecânica 9 (2005): 76-89.
    Published
  53. Silva, C.; Ferreira, L.M.. "Microplano – Um sistema de apoio à decisão para o planeamento da produção na indústria de plásticos". Investigação Operacional 23 2 (2003): 131-144.
    Published
Activities

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2023 - 2025 Analysing the energy transition process in developing countries
Supervisor
PhD in Industrial Engineering and Management (PhD)
2023 - 2025 Navigating the intersection of sustainable and fair goals in supply chains: optimization models and compromise solutions
Co-supervisor
PhD in Mechanical Engineering (PhD)
2022 - 2025 A conceptual model of Total Quality Management and Industry 4.0 for sustainable performance: An empirical study in Saudi manufacturing organizations
Supervisor
PhD in Mechanical Engineering (PhD)
2021 - 2025 A fairer pharmaceutical supply chain: Towards an optimization framework for global network planning
Co-supervisor
PhD in Mechanical Engineering (PhD)
2021 - 2024 Optimization de la performance globale de systèmes intelligents dans un environnement multi-agent
Co-supervisor
Phd in Numerical and Physical Systems (PhD)
2020 - 2024 Optimization methods to leverage the implementation of additive manufacturing in production systems
Co-supervisor
PhD in Mechanical Engineering (PhD)
Universidade de Coimbra, Portugal
2018/09/01 - 2023/06/01 Determination of the operation condition of lubricating oils in diesel engines
Supervisor of Roney Camargo Malaguti
PhD in Mechanical Engineering (PhD)
Universidade de Coimbra, Portugal
2018 - 2022/06 Dynamic modeling for reliability analysis of power supply systems in a large European hospital by petri nets, fuzzy inference system, stochastic or Markov chains
Co-supervisor
PhD in Mechanical Engineering (PhD)
2018/01/01 - 2021/10/30 Framework development for the prevention of food loss and waste: An analysis along the fresh food supply chain
Supervisor
Engenharia Mecânica (PhD)
2015/09/01 - 2019/04/01 Reconfigurability and Design of Manufacturing Systems
Supervisor
Engenharia Mecânica (PhD)
Universidade de Coimbra, Portugal
2011/09/01 - 2014/10/03 Análise da implementação do Lean manufacturing na indústria portuguesa e sua relação com o consumo energético
Supervisor
Engenharia Mecânica (PhD)
Universidade de Coimbra, Portugal
2009/02/01 - 2011/07/01 Workload Control: An Assessment
Supervisor
Engenharia Mecânica (PhD)
Universidade de Coimbra, Portugal

Event organisation

Event name
Type of event (Role)
Institution / Organization
2012 - 2012 ETRIA World Conference TRIZ Future 2012 (2012/10/20 - 2012/10/20)
Conference (Member of the Organising Committee)
2003 - 2003 CIBEM VI”, 6º Congresso Ibero-Americano de Engenharia Mecânica (2003/10/15 - 2003/10/18)
Conference (Member of the Organising Committee)

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2023/10 Determination of the operation condition of lubricating oils in diesel engines
Supervisor
Roney Camargo Malaguti (PhD)
2023/03 Driving manufacturing systems for the fourth industrial revolution
(Thesis) Main arguer
Vitor Manuel Caetano Alcácer (PhD)
Universidade Nova de Lisboa, Portugal
2022/04/06 Scheduling in collaborative and dynamic environments
(Thesis) Main arguer
Cristiane Maria Santos Ferreira (PhD)
2022 Contributions et limites des techniques lean vers l’intégration de robotique collaborative dans les process d’assemblage: une approche expérimentale Anthony Quenehen (PhD)
Arts et Métiers ParisTech - Centre de Lille, France
2021 Framework development for the prevention of food loss and waste: An analysis along the fresh food supply chain
Supervisor
Vanessa Sofia Melo Magalhães (PhD)
2019 Optimization-based approaches to augment the value of integrated decision-making in the chemical-pharmaceutical industry
(Thesis) Main arguer
Catarina Moreira Marques (PhD)
Universidade do Porto, Portugal
2019 Reconfigurability and design of manufacturing systems
Supervisor
Isabela Maganha (PhD)
2018 Modelos de otimização do tempo de substituição de autocarros de transporte urbano com indexação à frota de reserva
(Thesis) Arguer
Hugo David Nogueira Raposo (PhD)
Universidade de Coimbra, Portugal
2018 Desenvolvimento de uma metodologia para implementar lean production na indústria têxtil e do vestuário
(Thesis) Main arguer
Maria Laura Casaleiro Lobo da Costa Maia (PhD)
Universidade do Minho, Portugal
2018 Teaching/Learning in a new technological contexto: A case study in higher education
(Thesis) Main arguer
Carolina Simões da Costa (PhD)
Universidade de Aveiro, Portugal
2017 Fatores motivadores, inibidores e facilitadores no relacionamento fornecedor cliente na cadeia de abastecimento de biodiesel Eliene Cristina Barros Ribeiro (PhD)
Universidade de Aveiro, Portugal
2016 O papel do international purchasing na competitividade das empresas industriais: O caso português
(Thesis) Main arguer
Maria Odete Monteiro Lopes (PhD)
Universidade de Aveiro, Portugal
2015 Ferramentas de apoio à implementação da sustentabilidade na gestão da cadeia de abastecimento
(Thesis) Main arguer
Cláudia Margarida Ramos de Sousa e Silva (PhD)
Universidade de Aveiro, Portugal
2015 A metodologia Lean e o seu impacto na eficiência energética para a produção sustentável
Supervisor
Paulo Joaquim Antunes Vaz (PhD)
2015 Risk management in commodities supply chains: From a conceptual complexity to managerial practice
(Thesis) Main arguer
Marco André Viana Diniz Pimpão (PhD)
2015 A logística inversa como fator de sustentabilidade na indústria do vidro em Portugal
(Thesis) Main arguer
Agnelo da Silva Marques (PhD)
Universidade de Aveiro, Portugal
2014 O impacto das práticas sustentáveis na cadeia de abastecimento no desempenho da empresa
(Thesis) Main arguer
Luísa Alexandra Miranda de Jesus Pinto (PhD)
Universidade de Aveiro, Portugal
2013 Modelling Lean and Green Supply Chain
(Thesis) Main arguer
Susana Carla Vieira Lino Medina Duarte (PhD)
Universidade Nova de Lisboa, Portugal
2012 Integração de análise de valor no processo de configuração de empresas ágeis/virtuais
(Thesis) Main arguer
António Manuel Pires (PhD)
Universidade do Minho, Portugal
2011 Workload Control: An Assessment
Supervisor
Matthias Thürer (PhD)
Universidade de Coimbra, Portugal
2008 Projecto dinâmico de sistemas de produção orientados ao produto
(Thesis) Main arguer
Anabela Carvalho Alves (PhD)
Universidade do Minho, Portugal
2007 Contribuições para o controlo da actividade de produção no sector de produção por encomenda
(Thesis) Main arguer
Nuno Octávio Garcia Fernandes (PhD)
Universidade do Minho, Portugal
2004 Estudo do polimento por electro-erosão e do seu potencial de exploração no fabrico de moldes de injecção de plástico
(Thesis) Main arguer
1. Paulo Miguel Nogueira Peças (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Conference scientific committee

Conference name Conference host
2020 - 2020 2nd International Conference on Quality Innovation and Sustainability – ICQIS 2020 Leiria. Portugal
2019 - 2019 6th European Lean Educator Conference – ELEC 2019 Milano, Italy
2018 - 2018 5th European Lean Educator Conference – ELEC 2018 Braga, Portugal
2015 - 2015 7th International Conference on Management of computational and collective Intelligence in Digital EcoSystems – MEDES 2015 São Paulo, Brasil
2014/09/04 - 2014/09/05 Maintenance Performance Measurement and Management - MPMM 2014 University of Coimbra
Distinctions

Award

2021 Emerald & EFMD Outstanding Doctoral Research Awards