???global.info.a_carregar???
Teresa Leonor Ribeiro Cardoso Martins Morgado is ph. D in Mechanical Engineering by Instituto Superior Técnico of Lisbon University, Master in Mechanical Engineering option of Materials and Manufacturing Processes by Faculty of Engineering of the Porto University. Teresa holds an Associate Professor Public Examinations in the scientific area of Production Technology and Construction of Mechanical Engineering Department of Polytechnic University of Tomar (IPT). Teresa's expertise and research interests are Mechanical Behaviour of Materials, Mechanics of Fracture, Experimental Stress Analysis, Mechanical Tests, Structural Integrity of Materials, Instrumentation, Additive Manufacturing Processes namely LASER Cladding process and SLM, Foundry Processes, Injection Processes such as Rheocasting and HPDC, Extrusion Processes and Maintenance Management. She is currently consolidating her position as a Professor in the Mechanical Engineering Department of Lisbon Higher Institute of Engineering (ISEL)/ Polytechnic University of Lisbon as a research member of UnIRE - Unit for Innovation and Research in Engineering/ISEL, UNIDEMI/ FCTUNL - Research and Development Unit for Mechanical and Industrial Engineering/ Faculty of Science and Technology - Universidade NOVA de Lisboa, and of Navy Research Center (CINAV) /Naval Academy Faculty - Portugal. Professor since October 1993, Teresa has taken different positions as a Member of the UNIRE Executive Committee; Scientific Council Plenary and School' Technical Scientific Council; Technical Scientific Councils of Research Centers (UNIRE, CINAV, CIC-LNEC, LNEC, UNIDEMI-FCT/UNL, CeFEMA-IST-UL, ICEMS-IST-UL); Commission for Evaluation and Accreditation of Mechanical Engineering course, Engineering Departmental Unit Council, Internship Nucleus Member, Council of Mechanical Engineering Department, and Pedagogical Council. Teresa was also the Pedagogical Coordinator of the Mechanical Engineering course. Throughout her career, Teresa has been an organizer at dozens of international and national conferences as a member of Advisory Committees, Local Organizing Committees, and International Scientific Committees. She was the Chair of the 5th International Conference on Quality Innovation and Sustainability (ICQIS 2024) and XIV Meeting of Quality Researchers - RIQUAL 2024 local member/Organising Committee. She is a local member/Organising Committee of the IRF2025 – 8th International Conference Integrity-Reliability-Failure in Engineering, Materials, Manufacturing and Biomechanics. Teresa is the author and co-author of dozens of scientific publications and technical consulting reports and has guided dozens of jobs in industry internships like foundries, the food industry, the automotive industry, the railway industry, hospitals, the metalworking industry, the paper industry, industrial moulds, and injection plastic materials industry. Teresa is an editor of the Experimental Mechanic Journal and dozens of Special Issues in international journals. Teresa is also the author of dozens of special sessions at international conferences. Teresa is a permanent member of several societies such as the Order of Engineers (OE), Materials Portuguese Association (SPM), Portuguese Society for Experimental Analysis of Stress (APAET), European Structural Integrity Society (ESIS) and Ibero-American Federation of Mechanical Engineering (FeIbIm/FelbEm), ATTCEI (Portuguese Association of Knowledge and Technology Transfer), RIQUAL (Quality Researchers Network), EASN (European Aeronautics Science Network), European Society for Experimental Mechanics (EuraSEM).
Read full resume ↓
Identification

Personal identification

Full name
Teresa Leonor Ribeiro Cardoso Martins Morgado
Gender
Female

Citation names

  • Morgado, Teresa
  • Morgado, T. L. M
  • Morgado, T. L.
  • Morgado, T.

Author identifiers

Ciência ID
3910-F155-79D2
ORCID iD
0000-0003-3294-042X
Google Scholar ID
2ZkSvMgAAAAJ&hl
Researcher Id
N-6966-2013
Scopus Author Id
6505957223

Email addresses

  • tmorgado@dem.isel.ipl.pt (Professional)

Addresses

  • UNIDEMI|NOVA Research & Development Unit for Mechanical and Industrial Engineering Dept. Mechanical and Industrial Eng. Campus da FCT/UNL, 2829-516 , Caparica, Almada, Portugal (Professional)
  • Rua Conselheiro Emídio Navarro, 1, 1959-007, Lisboa, Lisboa, Portugal (Professional)
  • UnIRE, ISEL - Engineering School of Lisbon, Polytechnic University of Lisbon Rua Conselheiro Emídio Navarro, , 1959-007, Lisboa , Lisboa , Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
German Beginner (A1) Beginner (A1) Beginner (A1) Beginner (A1)
Spanish; Castilian Intermediate (B1) Intermediate (B1) Beginner (A1) Intermediate (B1)
Education
Degree Classification
2009
Concluded
 Ph.D. in Mechanical Engineering (Doctorate)
Major in Mechanical Engineering
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Structural Integrity of a Railway Component" (THESIS/DISSERTATION)
2002
Concluded
 Engenharia Mecânica (Doctorate)
Major in Sem especialidade
Universidade de Lisboa, Portugal

Instituto Superior Técnico Departamento de Engenharia Mecânica, Portugal
"Integridade Estrutural de um Componente Ferroviário" (THESIS/DISSERTATION)
1997
Concluded
 Master in Mechanical Engineering option of Materials and Manufacturing Processes (Master's Degree)
Major in Mechanical Engineering - Materials and Manufacturing Processes
Universidade do Porto Faculdade de Engenharia, Portugal
"Characterization of orthotropy in carbon epoxy plates using interferometric techniques" (THESIS/DISSERTATION)
1994
Concluded
 Mechanical Engineering (before Bologne Agreement) / Lic. Engenharia Mecânica (pré Bolonha) (Licenciate Degree)
Major in Design and Manufacturing (in English)/ Produção (in Portuguese)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Affiliation

Science

Category
Host institution		 Employer
2024/02/01 - Current Researcher (Research) Instituto Politécnico de Lisboa, Portugal
Unit for Innovation and Research in Engineering (UnIRE) , ISEL, Polytechnic University of Lisbon, Portugal
2021/01 - Current Researcher (Research) Escola Naval Centro de Investigação Naval, Portugal
Escola Naval Centro de Investigação Naval, Portugal
2017 - Current Researcher (Research) Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
2019/01/01 - 2020/07/31 Auxiliary Researcher (Research) Laboratório Nacional de Engenharia Civil Centro de Instrumentação Científica, Portugal
Laboratório Nacional de Engenharia Civil Centro de Instrumentação Científica, Portugal
2014 - 2017 Researcher (Research) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Centro de Fisíca e Engenharia de Materiais Avançados, Portugal
2001 - 2014 Researcher (Research) Universidade de Lisboa Instituto Superior Técnico, Portugal
Instituto de Ciências e Engenharia de Materiais e Superfícies / IST - UL, Portugal
1995/09/01 - 1997/02/27 Researcher (Research) Universidade do Porto Faculdade de Engenharia, Portugal

Teaching in Higher Education

Category
Host institution		 Employer
2021/09/01 - Current Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Lisboa, Portugal
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2020 - Current Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2001/09/01 - Current Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Tomar Escola Superior de Tecnologia de Abrantes, Portugal
2001 - 2020 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Tomar Escola Superior de Tecnologia de Abrantes, Portugal
2016 - 2019 Assistant Professor (University Teacher) Universidade NOVA de Lisboa, Portugal
2016 - 2019 Assistant Professor (University Teacher) Universidade NOVA de Lisboa, Portugal
2016/09/01 - 2018/12/31 Assistant Professor (University Teacher) Universidade Nova de Lisboa Departamento de Engenharia Mecânica e Industrial, Portugal
1996 - 2001/08 Assistant (Polytechnic Teacher) Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
Projects

Contract

Designation Funders
2025/01/01 - 2029/12/31 Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial - UNIDEMI
UID/00667/2025
10.54499/UID/00667/2025
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade Nova de Lisboa, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2024/12/31 Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial - UNIDEMI
UIDB/00667/2020
10.54499/UIDB/00667/2020
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade Nova de Lisboa, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2020/01/01 - 2024/12/31 Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial - UNIDEMI
UIDP/00667/2020
10.54499/UIDP/00667/2020
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade Nova de Lisboa, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2022/09/01 - 2023/08/31 MEVSIsMan - Metodologia de Extensão de Vida em Sistemas Complexos na Manutenção 4.0
MEVSIsMan
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Instituto Politécnico de Lisboa
Ongoing
2019/01/01 - 2019/12/31 Centro de Física e Engenharia de Materiais Avançados
UID/CTM/04540/2019
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade de Lisboa Centro de Fisíca e Engenharia de Materiais Avançados, Portugal

FCiênciasID Associação para a Investigação e Desenvolvimento de Ciências, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2019/01/01 - 2019/12/31 Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial - UNIDEMI
UID/EMS/00667/2019
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal

Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/04/01 - 2018/12/31 Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial - UNIDEMI
UID/EMS/00667/2013
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/01/01 - 2018/12/31 Centro de Física e Engenharia de Materiais Avançados
UID/CTM/04540/2013
Universidade de Lisboa Centro de Fisíca e Engenharia de Materiais Avançados, Portugal

FCiênciasID Associação para a Investigação e Desenvolvimento de Ciências, Portugal

Fundação da Faculdade de Ciências da Universidade de Lisboa, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2019/01/06 - 2023/12/30 Risk Methodologies applied in Ship Maintenance Equipment's
MaintenanceRisk
Researcher
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Escola Naval Centro de Investigação Naval, Portugal
 Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial
Ongoing
2019/07/01 - 2022/12/31 Influence study of extrusion manufacturing defects on fatigue limit strength of aluminium alloys
AlEXTRUSION
Principal investigator
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
 Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial
Ongoing
Outputs

Publications

Book chapter
  1. Luis Freitas; Filipe Pereira; Helena Lopes; Camelia Avram; Nuno Leal; Teresa Morgado; José Machado. "OPC-UA vs. MQTT (UNS): Evaluating Alignment with RAMI4.0 Through Literature Review". 2025.
    10.1007/978-3-031-94223-5_37
  2. João Alves; Teresa Morgado; Manuel Pereira; António M. Pereira. "A New Methodology Based on Defects Counting Methods and Optimisation Models to Predict the Fatigue Behaviour of Ti10Ta Alloy". 2025.
    10.1007/978-3-031-93554-1_44
  3. João Alves; Teresa Morgado; Helena Navas; Suzana Lampreia; António Abreu; Ana Dias. "The Transformation of Maintenance with the Arise of Industry 4.0". 2024.
    10.1007/978-3-031-61575-7_17
  4. João Alves; Teresa Morgado; Suzana Lampreia; Helena Navas; António Abreu; Ana Dias; João Calado. "Developing a TRIZ-Lean Methodology in Portuguese Navy Complex Systems". 2024.
    10.1007/978-3-031-52723-4_11
  5. Teresa Morgado; Catarina Brites; Alexandre Velhinho; Rui Silva; António Mourão. "Intrinsic Rheocasting Defect Study of an EN AB-42000 Mechanical Component". 2024.
    10.1007/978-3-031-62684-5_4
  6. Teresa Morgado; Gonçalo Alves; António Abreu; Ana Dias. "Intrinsic Availability of a Critical Productive Equipment". 2024.
    10.1007/978-3-031-52723-4_12
  7. Suzana Lampreia; Teresa Morgado; Helena Navas; Valter Vairinhos; Victor Lobo; João Alves. "Blockchain in a Maintenance Database". 2024.
    10.1007/978-3-031-52723-4_10
  8. Navas, H.; Dias, A.S.M.E.; Morgado, Teresa; Abreu, A.; Anes, V.. "Improvement of acquisition processes for highly perishable products by using lean, TRIZ and kano model". Universidade Lusíada Editora, 2024.
    https://doi.org/10.34628/XW6X-VE35
  9. Suzana Lampreia; Teresa Morgado; Helena Navas; Inês Mestre. "Application of Fuzzy Methodologies in Navy Systems Maintenance". 2023.
    10.1007/978-3-031-12914-8_31
  10. Teresa Morgado; Catarina Valente; Josu Leunda; Alexandre Velhinho; Rui Silva. "Fatigue Behavior of the Titanium-Tantalum Alloy Obtained by Additive Manufacturing". 2022.
    10.1007/978-3-030-97822-8_40
  11. Vitor Anes; António Abreu; Ana Dias; Pedro Carmona; Teresa Morgado. "Open Innovation in Industry 4.0—A Risk Assessment Framework for SMEs". 2022.
    10.1007/978-3-030-94617-3_21
  12. Lampreia, Suzana; Morgado, Teresa; Navas, Helena; Cabrita, Rita; Requeijo, José. "An Approach to Ship Equipment Maintenance Management". In Lecture Notes in Mechanical Engineering, 441-450. Springer International Publishing, 2021.
    10.1007/978-3-030-79165-0_41
  13. Morgado, Teresa; Pinto, André; Navas, Helena; Lampreia, Suzana. "Development of a Computerized Maintenance Management Model of a Laboratory Testing Service Enterprise". In Lecture Notes in Mechanical Engineering, 335-346. Springer International Publishing, 2021.
    10.1007/978-3-030-79165-0_32
  14. "Condition Analysis of Air Conditioning Cooling Water Pumps” Chapter". In Development in Maritime Technology and Engineering. Taylor & Francis Group, London, 2021.
    Published
  15. Morgado, Teresa. "LASER Cladding - A post Processing Technique for Coating, Repair and Re-manufacturing". In Materials Forming, Machining and Post Processing/ Near-Net Shape Manufacturing Process, edited by Kapil Gupta; Paulo Davim, 232-25'. Sweden: Springer, 2020.
    Published
  16. Morgado, T.; Carvalho M.; Navas H,; Lampreia S,. Corresponding author: Morgado, T.. "Development of a Maintenance Management Model based on Continuous Improvement". In Integrity/Reliability/Failure, edited by J. F. Silva Gomes, Shaker A. Meguid. FEUP-INEGI edition, 2020.
    Published
  17. Serra J; Morgado, T.. Corresponding author: Morgado, T.. "Stress Intensity Factor Study for a Welding Railway Gearbox Subjected to Vibrations and Fatigue". In Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials / 11th National Congress on Experimental Mechanics. FEUP-INEGI edition, 2018.
    Published
  18. Mousinho M.; Morgado, T.; Braga D.; Machado C. M.; Teixeia J. P.. Corresponding author: Morgado, T.. "Study of Wear Behaviour of a Helical Gear". In Integrity/Reliability/Failure in Automotive, Locomotive, Aerospace, Civil Engineering and Biomechanics, edited by J. F. Silva Gomes, Shaker A. Meguid. FEUP-INEGI edition, 2018.
    Published
  19. Paulo R.; Morgado, T.; Velhinho, A.; Machado C. M.; Teixeira J. P.. Corresponding author: Morgado, T.. "Evaluation and Characterization of Wear Behaviour of rolled steels for the production of a screw". In Integrity/Reliability/Failure in Automotive, Locomotive, Aerospace, Civil Engineering and Biomechanics. FEUP-INEGI edition, 2018.
    Published
  20. "Methodological Approach of Maintenance Management Applied to a Research Laboratory for Cost Reduction". In Mechanics and Materials in Design. SOCIETÁ EDITRICE ESCULAPIO, 2017.
    Published
  21. Morgado, T.. Corresponding author: Morgado, T.. "Laser Cladding as an Additive Manufacturing Process and Develop of the New Metallic Alloys". In Mechanics and Materials in Design. Italy: SOCIETÁ EDITRICE ESCULAPIO, 2017.
    Published
  22. Manso R.; Teixeira J. J.; Roma N.; Dias R.; Morgado, T.. Corresponding author: Morgado, T.. "Impact of the Design Automation of Progressive Tools for Automotive Components". In Progress in Mechanics and Materials in Design. FEUP-INEGI edition, 2017.
    Published
  23. Morgado, T.; Dias R.; Machado C. M.; Teixeira J. J. P.. Corresponding author: Morgado, T.. "Casting Defects and the Mechanical Design Philosophies". In Progress in Mechanics and Materials in Design, edited by J. F. Silva Gomes, Shaker A. Meguid. FEUP-INEGI edition, 2017.
  24. Baracinha J.; Machado C. M.; Morgado T.. Corresponding author: Machado C. M.. "Composite Drilling induced damage characterization". In Progress in Mechanics and Materials in Design, edited by J. F. Silva Gomes, Shaker A. Meguid. FEUP-INEGI edition, 2017.
    Published
  25. António P.; Navas H.; Morgado, T. L. M; Bento R.; Carrapito M.. Corresponding author: Morgado, T. L. M. "Automation of a laminar Flowmeter using MEMS technology". In New Trend on INTEGRITY-RELIABILITY-FAILURE, edited by J.F. Silva Gomes and Shaker A. Meguid.; J.F. Silva Gomes and Shaker A. Meguid. FEUP-INEGI edition, 2016.
    Published
  26. Morgado, Teresa. "Failure of steel coupling used in railway transport". In Handbook of Materials Failure Analysis with Case Studies from the Aerospace and Automotive Industries, edited by Abdel Salam Hamdy Makhlouf, 449-469. United Kingdom: Elsiever, 2015.
    Published
  27. Rodrigues C.; Morgado T.; Silva L.; Marques J.. "A failure study of load cells used on cylindrical vessels of raw material". In Experimental Mechanics - New Trends and Perspectives, edited by J.F. Silva Gomes. FEUP-INEGI edition, 2012.
    Published
  28. Morgado, T. L. M; Branco, C.M.; Infante V.. Corresponding author: Morgado, T. L. M. "Structural Durability of a railway steel cast ASTM 148-90-60 component". In Fracture of Materials and Structures from Micro to Macro Scale, edited by D. Klingbeil, M. Vormwald, K. – G. Eulitz. Germany: ESIS/ DVM, 2010.
    Published
Conference abstract
  1. CARMONA MARQUES, P; Dias, Ana; Morgado, Teresa; Abreu, António; Anes, Vitor; Lobo, Amanda; Castro, Cláudia. "Synchronizing Lean Manufacturing and Green Strategies: A Holistic Approach to Sustainable Supply Chain Operations". Paper presented in 5th International Conference on Quality Innovation and Sustainability, Lisbon, 2024.
  2. Navas, Helena; Dias, Ana; Morgado, Teresa; Anes, Vítor; CARMONA MARQUES, P; Abreu, António; Canas Correia, Francisco. "Development and implementation of Lean solutions in a Portuguese electrical systems performance testing laboratory". Paper presented in 5th International Conference on Quality Innovation and Sustainability, 2024.
  3. Anes, Vitor; Abreu, António; CARMONA MARQUES, P; Dias, Ana; Morgado, Teresa. "Dimensioning and validation of a logistics system through simulation". Paper presented in 5th International Conference on Quality Innovation and Sustainability, 2024.
  4. Leitão, C.; R. M. Leal; Morgado, T. L. M; Galvão, I. "Dissimilar joining by 3D printing: Study of the joint design". Paper presented in 7th ICEAF - International Conference in Engineering Against Failure, Spetses Island, 2023.
  5. Morgado, Teresa; Paulo, D.; Velhinho, A.; Pereira, A. M.; Mourão, A.. Corresponding author: Morgado, Teresa. "Fatigue Life Prediction of 6060 extruded Aluminium". Paper presented in ECF23, European Conference on Fracture, Funchal, 2022.
    Published
  6. Morgado, Teresa; Silva A.. "Filosofia Lean na linha 2000". 2011.
Conference paper
  1. Teresa Morgado; João Alves; António Pereira; Manuel Pereira; Rui F. Martins. "Study of Additive Manufacturing Intrinsic Defects on Fatigue Life of Ti-6Al-4V". 2025.
    10.3390/engproc2025090107
  2. Santos, Tiago; António Mário Henriques Pereira; Martinho, Pedro; Silva, Miguel; Morgado, Teresa. Corresponding author: António Mário Henriques Pereira. "Assessment of the Properties of Linear Low-Density Polyethylene (LLPDE) with Addition of Masterbatch". Paper presented in PCF2024 – XVII Portuguese Conference on Fracture, Setúbal, 2024.
  3. Lampreia, Suzana; Vairinhos, V.; Lobo, V.; Morgado, Teresa. Corresponding author: Lampreia, Suzana. "FMECA adaptado para Apoiar Ações de Manutenção". Paper presented in V Encontro Anual da Investigação & Desenvolvimento em Ciências Militares: Atualidade e perspetivas futuras, Alfeite-Almada, 2023.
  4. Dias, Ana; Navas, Helena; Morgado, Teresa; vitor manuel rodigues anes; Abreu, António. "Improvement of Acquisition Processes for Highly Perishable Products by Using Lean, TRIZ and Kano Model". Paper presented in International Conference on Technology Management and Operations (ICOTEM), Vila Nova de Famalicão, Portugal, 19-21 July, Vila Nova de Famalicão, 2023.
    Accepted
  5. Pereira, Mário; Abreu, Luis; Morgado, Teresa; Silva, Miguel. Corresponding author: Pereira, Mário. "Fatigue Predictions of Weldbonded Joints of AA alloy 6082-T6". Paper presented in FAIM 2023 - 32nd International Conference on Flexible Automation and Intelligent Manufacturing, Porto, 2023.
  6. Alves, João; Morgado, Teresa; Navas, H. V. G.; Lampreia, Suzana; Dias, A.; Abreu, A.; Calado, J.. Corresponding author: Alves, João. "Towards a new technologic world". Paper presented in TEchMa2023 – 6th International Conference on Technologies for the Welbeing and Sustainable Manufacturing Solution, Aveiro, 2023.
  7. Alves, Joao; Morgado, Teresa. "Developed a TRIZ-Lean Methodology in Portuguese Navy Complex Systems". Paper presented in 4 th International Conference on Quality Innovation and Sustainability, Setúbal, 2023.
    Accepted
  8. Lampreia, Suzana; Vairinhos, Valter Martins; Lobo, Victor José de Almeida e Sousa; Morgado, Teresa. Corresponding author: Lampreia, Suzana. "The Process Of Dynamic Maintenance On Naval Ships". Paper presented in 9th International Conference on Mechanics and Materials in Design - M2D2021, Funchal, 2022.
    Accepted
  9. Lampreia, Suzana; Vairinhos, Valter Martins; Morgado, Teresa; Lobo, Victor José de Almeida e Sousa. Corresponding author: Lampreia, Suzana. "Air Compressor Condition Monitoring Analysis". Paper presented in 9th International Conference on Mechanics and Materials in Design - M2D2021, Funchal, 2022.
    Accepted
  10. A. Velhinho; Morgado, Teresa; Catarina Brites; Rui Jorge Cordeiro Silva; António Mourão. "Structural integrity study of an aluminium automobile mechanical component, obtained by Rheocasting". Paper presented in Material TECH2022 An International Conference on Materials and Technologies, Raipur, 2022.
    Submitted
  11. Lampreia, Suzana; Inês Mestre; Morgado, Teresa; Navas, Helena. Corresponding author: Lampreia, Suzana. "Metodologias Fuzzy na Monitorização Equipamentos". Paper presented in 3º Encontro de Investigação e Desenvolvimento em ciências Militares, Amadora, 2021.
  12. Lampreia, Suzana; Morgado, Teresa; Navas, Helena; Inês Mestre. Corresponding author: Lampreia, Suzana. "Aplicação de Metodologias Fuzzy na Monitorização de Sistemas Marítimos". Paper presented in 16.º Congresso Nacional de Manutenção 2021:, Aveiro, 2021.
  13. Lampreia, Suzana; Morgado, Teresa; Rita Cabrita; Helena Navas. Corresponding author: Lampreia, Suzana. "An approach to Ship Equipment Maintenance". Paper presented in International Conference in Innovation in Engineering 2021, Guimarães, 2021.
  14. Morgado, Teresa; Lampreia, Suzana; Requeijo, José. "Risk Analysis in the Context of Non -Maintenance". Paper presented in Integrity/Reliability/Failure, Funchal, 2020.
  15. Morgado, Teresa. "Preparation of an equipment maintenance service provision company for the certification". 2016.
  16. Morgado, Teresa. "Automation of a laminar Flowmeter using MEMS technology". 2016.
Edited book
  1. Morgado, Teresa; Gaspar P.; Freitas F.; Palmeira T.; Maia M.; Navas H.; Campos D.; Torres J. M. S. P, ed. Lean Solutions Applied in the Belver Hydroelectric Central EDP. Portugal: FEUP-INEGI edition. 2015.
Journal article
  1. Alves, Joao; Morgado, Teresa; Pereira, António. "Sustainability of Selective Laser Melting process". Springer Proceedings in Business and Economics (2025):
    Accepted
  2. Alves, Joao; Morgado, Teresa. "Defeitos intrínsecos ao processo de fabrico aditivo". Techniques, Methodologies and Quality (2025):
    Submitted
  3. Alves, Joao; Morgado, Teresa; Lampreia, Suzana. "Machine Learning applied to Lifespan extension and waste reduction of mechanical components obtained by SLM". Springer Proceedings in Business and Economics (2025):
    Accepted
  4. Alves, Joao; Morgado, Teresa; Galvão, Ivan; Pereira, António. "Análise do comportamento plástico e micro Dureza de uma liga de Ti-6Al-4V, produzida por SLM". Associação Portuguesa de Análise experimental de Tensões 36 (2024): 65-74.
    Published
  5. Morgado, T; Dias, R; Pereira, M. "3D crack propagation study of a railway component using XFEM method". Journal of Physics: Conference Series 2692 1 (2024): 012006. http://dx.doi.org/10.1088/1742-6596/2692/1/012006.
    10.1088/1742-6596/2692/1/012006
  6. Alves, João; Morgado, Teresa; Galvão, Ivan; Pereira, António; Pereira, Manuel; Alves, Joao; Morgado, Teresa; et al. "Development of a Life Prediction Model of Ti-6Al-4V obtained by Additive Manufacturing". Procedia Structural Integrity 53 (2024): 236-245. http://dx.doi.org/10.1016/j.prostr.2024.01.029.
    10.1016/j.prostr.2024.01.029
  7. Alves, Joao; Morgado, Teresa; Pereira, António; Silva, Rui; Pereira, Manuel; Galvão, Ivan. "Influence of manufacturing defects on life fatigue prediction of a Ti-6Al-4V alloy, manufactured by SLM". Fatigue and Fracture of Engineering Materials and Structures (2024):
    Accepted
  8. Lampreia, Suzana; Vairinhos, Valter Martins; Morgado, T.; Vítor Lobo. "Adapted FMECA for supporting maintenance actions". The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), ISRES Publishing 26, 208-216. 26 (2023): 208-216. 3618609 (epstem.net).
    Open access
  9. Morgado, Teresa; Dias, Ricardo. "Study of extended and generalised finite element methods in 2D and 3D applied to a single edge notched bending test". Procedia Structural Integrity 47 (2023): 882-887. http://dx.doi.org/10.1016/j.prostr.2023.07.031.
    10.1016/j.prostr.2023.07.031
  10. Vitor Anes; Teresa Morgado; António Abreu; João Calado; Luis Reis. "Updating the FMEA Approach with Mitigation Assessment Capabilities—A Case Study of Aircraft Maintenance Repairs". Applied Sciences (2022): https://doi.org/10.3390/app122211407.
    10.3390/app122211407
  11. Morgado, Teresa; Diogo Paulo; Alexandre Velhinho; Mário Pereira; António Mourão. "Fatigue Limit Prediction Models of 6060 Aluminium Extruded Alloy". Procedia Structural Integrity 42 (2022): 1545-1551. https://www.sciencedirect.com/science/article/pii/S2452321622007521.
    Published
  12. Dias, A.S.M.E.; Antunes, R.M.G.; Abreu, A.; Anes, V.; Navas, H.V.G.; Morgado, T.; Calado, J.M.F.. "Utilization of the Arena simulation software and Lean improvements in the management of metal surface treatment processes". Procedia Computer Science 204 (2022): 140-147. http://dx.doi.org/10.1016/j.procs.2022.08.017.
    10.1016/j.procs.2022.08.017
  13. Taborda, Diogo; Leal, Rui; Morgado, Teresa; Leitao, Carlos; Galvão, Ivan. "Copper/stainless steel friction stir spot welds: feasibility and microstructural analysis". (2022): http://hdl.handle.net/10400.21/14887.
    10.3390/materproc2022008128
  14. Anes, Vítor; Morgado, Teresa; Abreu, António; Calado, João; Reis, Luís. "Updating the FMEA Approach with Mitigation Assessment Capabilities". (2022): http://hdl.handle.net/10362/148288.
    https://doi.org/10.3390/app122211407
  15. António Pedro; Teresa Morgado; Helena Navas. "An Uncertainties Simulation Model Applied to an Automated Laminar Flowmeter". Applied Sciences 10 3 (2020): 888-888. https://doi.org/10.3390/app10030888.
    10.3390/app10030888
  16. Morgado, Teresa. "Structural integrity study of steel railway gearbox housing". Procedia Structural Integrity (2020): https://doi.org/10.1016/j.prostr.2020.10.045..
    10.1016/j.prostr.2020.10.045
  17. Morgado, T.; Paulo R.; Amaral P.; Pereira M; Simoes J.; Velhinho J.. Corresponding author: Morgado, T.. "Durability Study of the AISI 1024HR and AISI 304HR Alloys Applied in the Organic Waste Industry". Revista Mecânica Experimental 32 1646-7078 (2020): 1-7. http://www-ext.lnec.pt/APAET/pdf/Rev_32_A1.pdf.
    Published
  18. Morgado, Teresa; de Paulo, Ricardo Manuel de Matos Soares; Amaral, Pedro; Pereira, Mário; Simões, José; Velhinho, Alexandre. "Durability study of the aisi 1024hr and aisi 304hr alloys applied in the organic waste industry". (2020): http://hdl.handle.net/10362/117018.
  19. Morgado, Teresa L. M.; Sandiães, Jorge; Navas, Helena V. G.; Teresa L.M. Morgado; Jorge Sandiães; Helena V.G. Navas. "TRIZ and lean philosophies applied together in management activities". Quality Innovation Prosperity (2019): http://hdl.handle.net/10362/97652.
    https://doi.org/10.12776/QIP.V23I3.1289
  20. Paulo R.; Morgado, T.. Corresponding author: Morgado, T.. "Wear behaviour of AISI 1024, AISI P20 and AISI hot-rolled steels in organic waste treatment industry". Revista Mecânica Experimental 30 1646-7078 (2018): 55-60. http://www-ext.lnec.pt/APAET/pdf/Rev_30_A7.pdf.
    Open access • Published
  21. Mousinho M.; Morgado, T.; Braga D.. Corresponding author: Morgado, T.. "Parameters and proprieties influence study in wear behaviour of a cast Steel DIN 16MnCr5 helical gear". Revista Mecânica Experimental 30 1646-7078 (2018): 11-19. http://www-ext.lnec.pt/APAET/pdf/Rev_30_A2.pdf.
    Open access • Published
  22. Morgado, T. L. M; Torres J, ; Valente C.; Navas H.. Corresponding author: Morgado, T. L. M. "Estudo dos parâmetros de controlo de um sistema laboratorial de LASER Cladding". Revista Mecânica Experimental 29 1646-7078 (2017): 69-76. http://www-ext.lnec.pt/APAET/pdf/Rev_29_A9.pdf.
    Open access • Published
  23. Morgado, Teresa. "Desenvolvimento de ensaios em componentes pneumáticos de aeronaves civis e militares". APAET Mecânica Experimental (2016):
  24. Morgado, Teresa. "Wear study of Innovative Ti-Ta alloys". Procedia Structural Integrity 2 (2016) (2016): https://www.sciencedirect.com/science/article/pii/S2452321616301706.
    doi:10.1016/j.prostr.2016.06.162
  25. Morgado, Teresa. "A failure analysis study of a prestressed steel cable of a suspension bridge". Case Studies in Construction Materials (2015):
    10.1016/j.cscm.2015.04.001
  26. Morgado, T.L.M.; Brito, A.S.; Branco, C.M.. "Failure analysis of a damaged helicopter rescue hoist cable". Materials Science Forum 730-732 (2013): 325-330. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870767503&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.325
  27. Rodrigues, Carlos; Morgado, Teresa; SilvaGomes, JF; Vaz, MAP. "A FAILURE STUDY OF LOAD CELLS USED ON CYLINDRICAL VESSELS OF RAW MATERIAL". Icem15: 15th International Conference on Experimental Mechanics (2012): http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320722901119&KeyUID=WOS:000320722901119.
  28. Silva, Luis; Marques, Jose; Morgado, Teresa; SilvaGomes, JF; Vaz, MAP. "FUEL AIRCRAFT VALVES TEST BENCH". Icem15: 15th International Conference on Experimental Mechanics (2012): http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320722902051&KeyUID=WOS:000320722902051.
  29. Morgado, T.L.M.; Branco, C.M.; Infante, V.. "Structural durability of a railway steel cast ASTM 148-90-60 component". 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-84870967002&partnerID=MN8TOARS.
  30. Morgado, T.L.M.; Branco, C.M.; Infante, V.. "A failure study of housing of the gearboxes of series 2600 locomotives of the Portuguese Railway Company". Engineering Failure Analysis 15 1-2 (2008): 154-164. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548487966&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2006.11.052
  31. Infante, V.; Branco, C.M.; Brito, A.S.; Morgado, T.L.. "A failure analysis study of cast steel railway couplings used for coal transportation". Engineering Failure Analysis 10 4 (2003): 475-489. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037705635&partnerID=MN8TOARS.
    10.1016/S1350-6307(03)00012-8
  32. Morgado, Teresa L.M.. "Characterization of the directions of material orthotropy in carbon-epoxy plates using modal analysis with ESPI". Proceedings of the International Modal Analysis Conference - IMAC 2 (2000): 1632-1636. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033887191&partnerID=MN8TOARS.
Journal issue
  1. LAGES MARTINS, LUÍS; Álvaro Silva Ribeiro; Morgado, Teresa. "Special Issue Experimental Mechanics, Instrumentation and Metrology". Applied Sciences II (2021):
    Published
Thesis / Dissertation
  1. Alves, João Filipe Gonçalves. "Modelos de previsão de vida à fadiga da liga Ti6Al4V obtida por manufatura aditiva". Master, 2023. http://hdl.handle.net/10400.21/17778.
  2. Alves, Gonçalo Carlos da Silva Rocha. "Implementação da Filosofia TPM numa Empresa da Indústria Aeronáutica". Master, 2022. http://hdl.handle.net/10400.21/16991.
  3. Taborda, Diogo Manuel Freitas. "Copper to stainless steel welding in lap joint". Master, 2022. http://hdl.handle.net/10400.21/16564.
  4. Mestre, Inês Ventura. "Desenvolvimento de uma Metodologia para a Gestão da Manutenção Baseada no Risco Utilizando a Lógica Fuzzy". Master, 2022. http://hdl.handle.net/10362/177205.
  5. Paulo, Diogo Pacífico. "Desenvolvimento de modelos de previsão de vida à fadiga para ligas de alumínio obtidas por extrusão". Master, 2021. http://hdl.handle.net/10362/143740.
  6. Amaral, Pedro Miguel Igreja. "Previsão de vida à fadiga dos aços AISI 1024 e AISI 304 para aplicação em componentes na indústria de tratamento de resíduos orgânicos". Master, 2019. http://hdl.handle.net/10362/75605.
  7. Bancaleiro, Tiago Manuel Oliveira. "Influência dos Defeitos de Fabrico na Integridade Estrutural de uma Engrenagem". Master, 2018. http://hdl.handle.net/10362/149231.
  8. Serra, João Miguel Branco. "Estudo de durabilidade de uma caixa redutora de fabrico em estrutura soldada". Master, 2018. http://hdl.handle.net/10362/58332.
  9. Brites, Catarina Filipa Vieira. "Integridade Estrutural de peças de alumínio obtidas por HPDC e Rheocasting". Master, 2018. http://hdl.handle.net/10362/63035.
  10. Mousinho, Miguel Alexandre Ferreira. "Estudo do comportamento ao desgaste de uma engrenagem helicoidal". Master, 2017. http://hdl.handle.net/10362/27860.
  11. Paulo, Ricardo Manuel de Matos Soares de. "Caracterização e avaliação do comportamento ao desgaste de aços laminados para parafuso sem fim". Master, 2017. http://hdl.handle.net/10362/27687.
  12. Dias, Ricardo Manuel Ribeiro. "Estudo da propagação de fenda num componente ferroviário". Master, 2017. http://hdl.handle.net/10362/31302.
  13. Valente, Catarina Beatriz Mendes. "Estudo do Comportamento Mecânico de uma Liga de Titânio-Tântalo, Ti10Ta, Produzida por LASER Cladding". Master, 2017. http://hdl.handle.net/10362/27686.
  14. Arraiano, Beatriz Pereira da Guia. "Estudo de durabilidade de peças em alumínio vazado AlSi7Mg". Master, 2017. http://hdl.handle.net/10362/29357.
  15. Paulo, Ricardo Manuel de Matos Soares de. "Caracterização e avaliação do comportamento ao desgaste de aços laminados para parafuso sem fim". Master, 2017. http://hdl.handle.net/10362/27687.
  16. Pedro, António Afra Gonçalves. "Estudo de melhoria de um sistema de ensaio de reguladores de oxigénio de aeronaves". Master, 2016. http://hdl.handle.net/10362/19343.
  17. Palmeira, Tiago Miguel Duarte. "Estudo de melhoria da gestão da manutenção de um terminal petrolífero". Master, 2015. http://hdl.handle.net/10362/15710.
  18. Campos, Diogo Pestana de Almeida. "Capacitação de uma empresa aeronáutica para manutenção de alguns componentes de aeronaves". Master, 2015. http://hdl.handle.net/10362/15699.
  19. Torres, Jorge Miguel Sá Pinto. "Melhoramento e automatização de um sistema de revestimento com laser". Master, 2015. http://hdl.handle.net/10362/16200.
  20. Sousa, Miguel Golebiowski Leite de. "Avaliação da integridade estrutural de um componente utilizado na indústria ferroviária". Master, 2014. http://hdl.handle.net/10362/14665.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2025/06/27 Alves J., Morgado T. Pereira A. M. Mário (2025). Impacto da Inteligência Artificial no controlo de qualidade de componentes mecânicos. Riqual 2025 XV Encontro de Investigadores da Qualidade, 27 de june de 2025/ Águeda- Portugal, Livro de Atas. https://publicacoes.riqual.org/wp-content/uploads/2025/09/troia_xv.pdf Riqual 2025 XV Encontro de Investigadores da Qualidade
2025/06/27 Neves D., Morgado T., Pereira A. M., Navas H. (2025) Melhoria das propriedades mecânicas das ligas leves submetidas a Shot Peening. Riqual 2025 XV Encontro de Investigadores da Qualidade, 27 de june de 2025/ Águeda- Portugal, Livro de Atas. https://publicacoes.riqual.org/wp-content/uploads/2025/08/troia_xv_85.pdf Riqual 2025 XV Encontro de Investigadores da Qualidade
Universidade de Aveiro Pólo da Escola Superior de Engenharia e Gestão de Águeda (Águeda, Portugal, Portugal)
2025 Morgado T., et al. (2025). Development of 16MnCr5 CD Steel new fatigue limit predict model. Paper Ref 22657. Proceedings IRF2025: 8th International Conference on Integrity-Reliability-Failure In Engineering, Materials, Manufacturing and Biomechanics. Porto 15-18 July 2025 DOI: https://doi.org/10.24840/978-972-752-323-8 IRF 2025
Faculdade de Engenharias da Universidade do Porto (Porto, Portugal)
2025 Morgado T., et al. (2025). Durability Study of ST-52 and R304 Subject to Corrosion Environment and Fatigue Loads. Paper Ref 22658. Proceedings IRF2025: 8th International Conference on Integrity-Reliability-Failure In Engineering, Materials, Manufacturing and Biomechanics. Porto 15-18 July 2025 DOI: https://doi.org/10.24840/978-972-752-323-8 IRF 2025
Faculdade de Engenharias da Universidade do Porto (Porto, Portugal)
2025 Lampreia, S., Vairinhos, V, Morgado, T., Lobo V. Modeling Maintenance Strategies Based on Dynamic Methodologies. Quality, Innovation and Sustainability. Abstract Book of the 6th International Conference on Quality Innovation and Sustainability, Published by the International Journal of Economic Behavior. Editors Frederica Murmura, Giada Pierli, Fabio Musso and Gilberto Santos. ISSN: 2069-5756. EISSN: 2285-0430. https://10.14276/2285-0430.5182 ICQIS2025
Carlo Bo University of Urbino, Italy (Urbino, Italy)
2025 Silva, M., Pereira, M., Sá, J., Morgado T. Mechanical Metamaterials for Sustainability: Innovative Structures for Resource Efficiency. Quality, Innovation and Sustainability. Abstract Book of the 6th International Conference on Quality Innovation and Sustainability, Published by the International Journal of Economic Behavior. Editors Frederica Murmura, Giada Pierli, Fabio Musso and Gilberto Santos. ISSN: 2069-5756. EISSN: 2285-0430. https://10.14276/2285-0430.5182 ICQIS2025
Carlo Bo University of Urbino, Italy (Urbino, Italy)
2025 • Neves, D., Morgado, T., Pereira, M., Lampreia S. Sustainability of Light Alloys: Assessing the Environmental Impact of Aluminium and Titanium. Quality, Innovation and Sustainability. Abstract Book of the 6th International Conference on Quality Innovation and Sustainability, Published by the International Journal of Economic Behavior. Editors Frederica Murmura, Giada Pierli, Fabio Musso and Gilberto Santos. ISSN: 2069-5756. EISSN: 2285-0430. https://10.14276/2285-0430.5182 ICQIS2025
Carlo Bo University (Urbino, Italy)
2024/06/19 Pereira, M., Simões F., Abreu, L., Alves, J., Morgado T., (2024) Optimization of Plasma Direct Energy Deposition – Additive Manufacturing of Metals Process using Design of Experiments Methodologies. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. http
Instituto Politécnico de Lisboa (Lisboa, Portugal)
2024/06/19 Marques, T., Morgado T. (2024) Evolution of Life Prediction Methodologies for Aeronautic Systems in the Context of Industry 5.0. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. https://sites.google.com/view/icqis-2024/about?authuser=0.
(Lisboa, Portugal)
2024/06/18 Anes, V., Abreu, A., Marques, P., Dias, A., Morgado T., (2024) Dimensioning and validation of a logistics system through simulation. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. https://sites.google.com/view/icqis-2024/about?authuser=0. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications
Instituto Politécnico de Lisboa (Lisboa, Portugal)
2024/06/18 Navas, H., Dias A., Morgado T., Anes, V., Abreu A., Carmona, P., Correia, F. (2024) Development and Implementation of Lean solutions in a Portuguese electrical systems performance testing laboratory. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. htt ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications
Instituto Politécnico de Lisboa
2024/06/17 Alves, J., Morgado T., Pereira, M., Lampreia, S. (2024) Machine Learning applied to LCA of mechanical components obtained by SLM. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. https://sites.google.com/view/icqis-2024/about?authuser=0. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications
Instituto Politécnico de Lisboa (Lisboa, Portugal)
2024/06/17 Marques, P., Dias, A., Morgado T., Abreu, A., Anes, V., Lobo, A., Castro, C. (2024) Synchronizing Lean Manufacturing and Green Strategies: A Holistic Approach to Sustainable Supply Chain Operations. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. htt ICQIS 2024
Instituto Politécnico de Lisboa (Lisboa, Portugal)
2024/06/16 Alves, J., Morgado T., Pereira, M. (2024) Sustainability of Selective Melting Process. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. https://sites.google.com/view/icqis-2024/about?authuser=0. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications
instituto Politécnico de Lisboa (Lisboa, Portugal)
2024/06/16 Lampreia, S., Vairinhos, V., Lobo, V., Morgado T., Navas H. (2024) Ship Dynamic Maintenance – Risk Analysis. Editors: Teresa Morgado, António Abreu, João Calado, Ivan Galvão, José Sá. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications |Abstract Book. Polytechnic University of Lisbon Lisboa/Portugal Edition. ISBN 978-989-33-622-9. https://doi.org/10.34629/29CW-HZ58. https://sites.google.com/view/icqis-2024/about?authuser=0. ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications
Instituto Politécnico de Lisboa (Lisboa, Portugal)

Supervision

Thesis Title
Role		 Degree Subject (Type)
Institution / Organization
2025 - 2025 Desenvolvimento de metodologias de gestão inovadoras em contexto de manutenção 4.0
Supervisor
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2023 - 2023 Efeitos da Manutenção no Rendimento de Motorredutores Industriais
Co-supervisor
 Engenharia Mecânica (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2023 - 2023 Modelos de previsão de vida à fadiga da liga Ti6Al4V obtida por manufatura aditiva
Supervisor
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2022 - 2022 Implementação da Filosofia TPM numa Empresa da Indústria Aeronáutica
Co-supervisor
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Event organisation

Event name
Type of event (Role)		 Institution / Organization
2023/06/16 - 2024/06/19 ICQIS2024 - 5th International Conference Quality Innovation and Sustainability. Sustainability, Innovation and Quality| Theory and applications (2024/06/16 - 2024/06/19)
Conference (President of the Organising Committee)
Distinctions

Award

2025 Gold Best Scientific Paper Award