???global.info.a_carregar???
Paula M. C. Torres is an Assistant Researcher at the Department of Materials Engineering and Ceramics (DEMaC) and a member of CICECO – Aveiro Institute of Materials at the University of Aveiro (UA), funded by an FCT CEEC-Individual-2023 grant since September 2024. Following the completion of her PhD in Materials Science and Engineering (2016), she held a Junior Researcher position under the FCT CEEC-Individual-2017 programme (2019–2024). Her research focuses on the synthesis and processing of calcium phosphate-based materials for biomedical and structural applications, including injectable bone cements, porous scaffolds, structural bioceramics, and composite systems. She develops an independent research line with a primary focus on calcium phosphate-based biomaterials, contributing to the development of self-setting and sintering-free ceramic systems capable of combining structural performance with therapeutic functionality. She has established expertise in pure and ion-doped calcium phosphates and in the fabrication of three-dimensional ceramic microstructures through colloidal processing routes and direct ink writing. She has coordinated one FCT-funded research project as Principal Investigator and has participated in several nationally and internationally funded projects, including two ongoing FCT projects and the European H2020 project InterLynk (coordinated by the University of Aveiro and concluded in July 2025). She is the author of 39 peer-reviewed international publications, accumulating more than 1,920 citations and an h-index of 26 (Scopus, February 2026), and holds two national patents (granted in 2024 and 2026). She has supervised 21 Master’s students (20 completed), two undergraduate final projects, one contract researcher, and several undergraduate and Master’s research fellows, contributing to advanced training in biomaterials and ceramic processing. She currently serves as a member of the Scientific Council of the University of Aveiro and as a Full Member of its Standing Committee for Human Resources. She is a member of the Portuguese Ceramic and Glass Society (SPCV) and, through this membership, affiliated with the European Ceramic Society (ECerS). Since October 2025, she has served as Secretary of the Supervisory Board of SPCV.
Read full resume ↓
Identification

Personal identification

Full name
Paula Maria da Costa Torres

Citation names

  • Paula M. C. Torres
  • P. M. C. Torres
  • Torres PMC
  • Torres P.
  • Torres, P.
  • P. Torres
  • Paula M. Torres

Author identifiers

Ciência ID
331D-F0E0-7ADC
ORCID iD
0000-0001-7136-984X
Google Scholar ID
l9Oe0BsAAAAJ
Scopus Author Id
7101785205

Knowledge fields

  • Engineering and Technology - Materials Engineering - Ceramics
  • Engineering and Technology - Materials Engineering - Composites
  • Medical and Health Sciences - Medical Biotechnology - Biomaterials
Education
Degree Classification
2016/01/15
Concluded
 Ciência e Engenharia de Materiais (Doctorate)
Major in Biomaterials
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal

Universidade de Aveiro CICECO, Portugal
"Cimentos injetáveis à base de fosfatos de cálcio para vertebroplastia" (THESIS/DISSERTATION)
 Approved
2007/10/31
Concluded
 Gestão Ambiental, Materiais e Valorização de Resíduos (Master's Degree)
Major in Gestão ambiental, Indústria cerâmica, Lamas activadas, Tratamento de efluentes
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal

Universidade de Aveiro Departamento de Economia Gestão e Engenharia Industrial, Portugal

Universidade de Aveiro Departamento de Ambiente e Ordenamento, Portugal
"Reciclagem de Lamas de Granito Ornamental em Pastas Cerâmicas (Recycling of ornamental granite sludge in ceramic pastes)" (THESIS/DISSERTATION)
 Approved
2004/03/17
Concluded
 Engenharia Cerâmica e do Vidro (Licenciate Degree)
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
" Aumento da velocidade de formação de parede no processo de conformação por enchimento (Increase in the rate of wall formation in the filling forming process)" (THESIS/DISSERTATION)
Affiliation

Others

Category
Host institution		 Employer
2024/09/01 - Current Auxiliary researcher (2023.07934.CEECIND/CP2840/CT0022): "Multifunctional hybrid polymer-ceramic microdevices for medical applications – combination of hard-soft materials in a layered structure" Fundação para a Ciência e a Tecnologia, Portugal
Universidade de Aveiro CICECO, Portugal
2019/05/01 - 2024/08/31 Júnior Researcher (CEECIND/01891/2017/CP1459/CT0036): "Multifuncional sintering-less ceramic composite microdevices for healthcare applications" Fundação para a Ciência e a Tecnologia, Portugal
Universidade de Aveiro CICECO, Portugal
2019/03/01 - 2019/04/30 First Level doctorate Researcher under the FCT project FlexMicroDerm_PTDC/BTM-MAT/29274/2017 Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro CICECO, Portugal
2018/05/01 - 2019/02/28 Post-doctoral researcher Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
Universidade de Aveiro CICECO, Portugal
2016/03/04 - 2019/02/28 Post-doctoral researcher Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
Universidade de Aveiro CICECO, Portugal
2017/04/01 - 2018/04/30 Researcher, working in development of calcium phosphate based cements Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
2016/10/01 - 2017/03/31 Researcher - "Preparation of components for controlled drug release using calcium phosphate-based cements" within the Project UID/CTM/50011/2013-CICECO Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro, Portugal
2016/03/04 - 2016/08/31 Assistant Researcher under the European project- FABIMED "Fabrication and Functionalization of BioMedical Microdevices" (FP7 - EC-GA FP7-608901) Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro CICECO, Portugal
(...)
Projects

Grant

Designation Funders
2013/10/01 - 2015/12/31 FABIMED - Fabrication and Functionalization of BioMedical Microdevices
info:eu-repo/grantAgreement/EC/FP7/608901/EU
Research Fellow
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung eV, Germany

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Research Center for Non Destructive Testing GmbH, Austria

Promolding BV, Netherlands

Servicio Galego de Saúde, Spain

Universidade de Aveiro CICECO, Portugal

Asociacion de Investigation Metalurgica del Noroeste, Spain
 European Commission
Concluded
2007/05/02 - 2009/08/31 Additive Optimisation for Improved Ceramics (ADOPTIC)
COLL-CT-2006 030338 ADOPTIC
Research Fellow
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal

Ceram Research Ltd, United Kingdom

Akademia Górniczo-Hutnicza im Stanislawa Staszica w Krakowie, Poland

Centro Tecnológico da Cerâmica e do Vidro, Portugal

Orto Botanico Università di Modena e Reggio Emilia, Italy
 European Commission
Concluded
2005/12/01 - 2006/08/31 SHOEMAT - Materiais inovadores para calçado - wasterval - Valorização de lamas e resíduos de curtumes.
03/2003/00114/181
Scientific Initiation Fellow
Centro Tecnologico do Calcado de Portugal, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Instituto Nacional de Engenharia Tecnologia e Inovação, Portugal

Instituto Politécnico de Bragança, Portugal

Pólo de Inovação em Engenharia de Polímeros, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho, Portugal
 Ministério da Economia
Concluded

Contract

Designation Funders
2024/09/01 - Current Auxiliary researcher (2023.07934.CEECIND/CP2840/CT0022 - FCT): "Multifunctional hybrid polymer-ceramic microdevices for medical applications – combination of hard-soft materials in a layered structure"
2023.07934.CEECIND/CP2840/CT0022
10.54499/2023.07934.CEECIND/CP2840/CT0022
Researcher
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia

Universidade de Aveiro CICECO
Ongoing
2025/12/01 - 2028/11/29 ECORESIN - Resinas fotopolimerizáveis ecológicas para fabrico aditivo de biomateriais cerâmicos para aplicações médico-dentárias
COMPETE2030-FEDER-00850500
Researcher
Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2025/07/31 - 2028/07/15 IMMOSALT-GLASSCER - Desenvolvimento de vidros e cerâmicos para imobilização de resíduos ricos em sais de fluoreto produzidos por reatores a sal fundido.
COMPETE2030-FEDER-00744700
Researcher
Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2025/12/31 CICECO – Aveiro Institute of Materials
LA/P/0006/2020
10.54499/LA/P/0006/2020
Universidade de Aveiro CICECO, Portugal

Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2021/01/01 - 2025/07/31 InterLynk - Human Platelet Lysates-based Scaffolds for Interfacial Multi-tissue Repair
953169
10.3030/953169
953169
Researcher
Universidade de Aveiro CICECO, Portugal

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Charité - Universitätsmedizin Berlin Institut für Medizin- Pflegepädagogik und Pflegewissenschaft, Germany

Universiteit Maastricht, Netherlands

METATISSUE - BIOSOLUTIONS, LDA, Portugal

KUROS BIOSCIENCES BV, Netherlands

Envisiontec GmbH, Denmark
 European Commission
Concluded
2020/01/01 - 2024/12/31 CICECO-Aveiro Institute of Materials - UIDB/50011/2020
UIDB/50011/2020
Researcher
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2024/02/02 - 2024/12/05 In vivo biocompatibility assessment of 3D printed multi-doped calcium phosphate cement-based scaffolds: reaction in subcutaneous tissues
sem codigo
Universidade de Fortaleza, Brazil

Universidade de Aveiro, Portugal
 Universidade de Fortaleza
Concluded
2021/03/29 - 2024/11/28 Add2MechBio - Additive manufacturing meets mechanobiology - design and fabrication of osteogenic-stimulating implants
PTDC/EME-EME/1442/2020
Researcher
Universidade do Minho - Campus de Azurém, Portugal

Universidade de Aveiro CICECO, Portugal

International Iberian Nanotechnology Laboratory, Portugal

Aalto University Center for Entrepreneurship, Finland
 Fundação para a Ciência e a Tecnologia
Concluded
2019/05/01 - 2024/08/31 Júnior Researcher (CEECIND/01891/2017/CP1459/CT0036 - FCT): "Multifuncional sintering-less ceramic composite microdevices for healthcare applications"
CEECIND/01891/2017/CP1459/CT0036
10.54499/CEECIND/01891/2017/CP1459/CT0036
Researcher
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia

Universidade de Aveiro CICECO
Concluded
2020/09/30 - 2023/06/30 3DCompCer - Additive manufacturing of ceramic-based composites for Mechanical tools
POCI-01-0247-FEDER-047060
Researcher
Universidade de Aveiro, Portugal
 Agência Nacional de Inovação SA
Concluded
2018/10/20 - 2022/10/19 FlexMicroDerm - Self-setting bioceramic microdevices for medical applications in transdermal drug delivery
PTDC/BTM-MAT/29274/2017
Principal investigator
Universidade de Aveiro CICECO, Portugal

Escola Universitária Vasco da Gama Centro Investigação Vasco da Gama, Portugal

Universidade de Lisboa Instituto de Investigação do Medicamento, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2018/07/26 - 2022/07/25 TAMAZ3D - Development of a Decision Support Tool for Additive Manufacturing of Alumina-Zirconia 3-D structures
PTDC/EME-EME/30493/2017
Researcher
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2018/07/01 - 2022/06/30 MULBIOIMPLANT - Implante multifuncional e bioinspirado para melhorar a integração óssea
PTDC/EME-EME/32486/2017
Researcher
Universidade de Aveiro, Portugal

Universidade de Évora, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2018/06/01 - 2022/05/31 2BBone - Desenvolvimento de biomateriais não sinterizáveis à base de fosfatos de cálcio com bi-funcionalidade: regeneração e tratamento de cancro ósseo
PTDC/CTM-CER/29940/2017
Researcher
Universidade de Aveiro CICECO, Portugal

Instituto Nacional de Engenharia Biomédica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2019/01/01 - 2019/12/31 CICECO-Instituto de Materiais de Aveiro UID/CTM/50011/2019
UID/CTM/50011/2019
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/01/01 - 2018/12/31 Instituto de Materiais de Aveiro - CICECO UID/CTM/50011/2013
UID/CTM/50011/2013
Researcher
Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2013/01/01 - 2014/12/31 Strategic Project - LA 11 - 2013-2014
PEst-C/CTM/LA0011/2013
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2010/04/01 - 2013/09/30 Desenvolvimento de sistemas microelectromecânicos por gelcasting - GELMEMS
PTDC/CTM/099489/2008
Universidade de Aveiro, Portugal

Novas Tecnologias e Processos Avançados de Produção, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Strategic Project - LA 11 - 2011-2012
PEst-C/CTM/LA0011/2011
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Conference abstract
  1. Martins, A. M. ; Oliveira, J.; Zelenovskii, Pavel; Mafra, Luís; Olhero, Susana; Gonçalves, Lídia; Ana F Bettencourt; Paula M.C. Torres. Corresponding author: Ana F Bettencourt. "Genipin Crosslinked Chitosan Reinforced Apatite Cement as a Carrier for Local Anti-Inflammatory Drug Delivery". Paper presented in Materiais 2022, Marinha Grande, 2022.
    Published • 10.3390/materproc2022008134
  2. Ribeiro, Nilza; Paula M.C. Torres; T.S.S. Carvalho ; João Horta Belo; João P. Araújo; Olhero, Susana. Corresponding author: Olhero, Susana. "Multifunctional Sintering-Free Composite Scaffolds Developed by Additive Manufacturing". Paper presented in Materiais 2022, Marinha Grande, 2022.
    Published • 10.3390/materproc2022008104
  3. Olhero, Susana; Paula M.C. Torres; Mesquita-Guimarães, Joana; Baltazar, Joana Miguel Almeida; Pinho-da-Cruz, J.; Sónia Cristina Alexandre Gouveia. Corresponding author: Sónia Cristina Alexandre Gouveia. "Structural Performance of Dense Alumina-Zirconia Ceramics: An Overview of Conventional versus Additive Manufacturing". Paper presented in Materiais 2022, Marinha Grande, 2022.
    Published • 10.3390/materproc2022008005
  4. P. M. C. Torres. "Recycling of Industrial Wastes – An Overview about Successful Case Studies". Paper presented in The 8th International Congress on Applied Mineralogy – ICAM 2004, São Paulo, 2004.
    Published
  5. P. M. C. Torres. "Utilization of Solid Wastes from Granite Cutting Processing in Porcelain Industry". Paper presented in 5th Int. Sci. Conf. - Al-Azhar Bulletin of Science, Cairo, 2003.
    Published
  6. P. M. C. Torres. "Recycling of Sludges Generated from Natural Stones Cutting Processes In Ceramic Formulations". Paper presented in TMS Fall 2002 Extraction and Processing Division Meeting on Recycling and Waste Treatment in Mineral and Metal Processing: Technical and Economic Aspects, Lulea, 2002.
    Published
Conference poster
  1. A. Godinho,R; Sobreiro-Almeida, Rita; Ribeiro, Nilza; Costa, Marcelo; Custódio, Catarina A.; Paula M. C. Torres; S. Olhero; Mano, Joao F.. "Hybrid additive manufacturing for the development of highly bioactive multimaterial 3D-printed scaffolds for osteochondral regeneration". Paper presented in Jornadas CICECO 2025, 2025.
  2. Godinho, Ana M.; Sobreiro-Almeida, Rita; Ribeiro, Nilza; Costa, Marcelo; Paula M. C. Torres; Olhero, Susana M.; Mano, Joao F.. "Hybrid additive manufacturing for the development of highly bioactive multimaterial 3D-printed scaffolds for osteochondral regeneration". Paper presented in Supralife Final International Conference, 2025.
  3. Paula M. C. Torres; Baltazar, Catarina S.; João C.C. Abrantes; Tânia S.S. Carvalho; Ribeiro, Nilza; Tiago R. Correia; Mano, Joao F.; S. Olhero. "Multidoped ß-tricalcium phosphate powders for bone graft substitutes: synergistic effects of strontium, magnesium, manganese and zinc as dopant ions on structural and biological properties". Paper presented in TERMIS European Congress 2025, 2025.
  4. Paula M. C. Torres; Catarina S. Baltazar ; Felix, Gabriel S.; Roberta B. Cavalcante; Ribeiro, Nilza; T.S.S. Carvalho ; Tiago R. Correia; et al. "3D printed scaffolds of multi-doped biphasic calcium phosphate based composite cement with improved bioactivity". Paper presented in TERMIS European Congress 2025, 2025.
  5. Eduardo D. Gurgel-Filho; Felix, Gabriel S.; Cavalcante, Roberta B.; Baltazar, Catarina Salgueiro; S. Olhero; Raposo, Ramon S.; Paula M. C. Torres. "In vivo biocompatibility assessment of 3D printed multi-doped calcium phosphate cement-based scaffolds: reaction in subcutaneous tissues". Paper presented in TERMIS European Congress 2025, 2025.
  6. Godinho, Ana M.; Sobreiro-Almeida, Rita; Ribeiro, Nilza; Costa, Marcelo; Paula M. C. Torres; Olhero, Susana M.; Mano, Joao F.. "Multimaterial strategies for the development of highly bioactive constructs targeting multi-tissues and interfaces". Paper presented in SupraLife Third School - Supramolecular Multifunctional Biomaterials, 2025.
  7. T.S.S. Carvalho; Paula M. C. Torres; João Horta Belo; Correia, T. R.; Mano, Joao F.; Olhero, Susana. "CaP-based cement ink development and optimization for 3D-printed bone tissue constructs". Paper presented in Jornadas CICECO 2024, 2024.
  8. T.S.S. Carvalho; Paula M. C. Torres; J. H. Belo; Mano, Joao F.; Olhero, Susana. "Fine-tuned self-setting CaP-based inks for 3D-printed bone tissue substitutes". Paper presented in I Workshop on Additive Biofabrication, 2024.
  9. Ribeiro, Nilza; Paula M. C. Torres; Correia, T. R.; Mano, Joao F.; Olhero, Susana. "Naringin-loaded bioceramic-based scaffolds obtained by direct ink writing for bone regeneration". Paper presented in WBC 2024 - 12nd World Biomaterials Conference, 2024.
  10. C. Santos; L. Leduque; G. Barandas; C. Swaskowvsky; P. Carvalho; A. Almeida; E. Silveira; Paula M. C. Torres; M.L.R. Pinto. "Comparative study of skin histology from different species aiming optimization of microneedle devices application". Paper presented in III Meeting AL4Animals, 2024.
  11. Miguel Coelho; Tiago R. Correia; Mano, Joao F.; Olhero, Susana; Paula M.C. Torres. "Calcium phosphate-based cement enriched with platelet lysates: influence on its properties". Paper presented in Jornadas CICECO 2023, 2023.
  12. Isabel Cristina de Sá Correia de Sousa; Júnia Rodrigues ; Adriana Lages; Ribeiro, Nilza; Paula M.C. Torres; Olhero, Susana; Tedim, João. "Natural-based microsphere formulations as controlled release carriers for biomedical applications". Paper presented in Jornadas CICECO, Crossing Borders, Aveiro, Portugal, 2023.
  13. Tânia S.S. Carvalho; Ribeiro, Nilza; Paula M. C. Torres. "Innovative PLA-CaP Magnetic Biocomposites for Tissue Regeneration". Paper presented in Jornadas CICECO, Crossing Borders, Aveiro, Portugal., 2023.
  14. Carvalho, Tânia S.S.; P. M. C. Torres; J. H. Belo; J.C.C. Abrantes; D. Lopes; A. Kavaleuski; J. P. Araújo; M. Bañobre-Lopez; Olhero, Susana. "Enhancing the Magnetic Response of Calcium Phosphate-Based Powders for Bone Tissue Regeneration". Paper presented in 13th Joint European Magnetic Symposia, 2023.
  15. Miguel Coelho; Tiago R. Correia; João Mano; Olhero, Susana; P. M. C. Torres. "Influence of platelet lysates in the calcium-phosphate-based cement properties". Paper presented in ECERS 2023 - the XVIIIth Conference of the European Ceramic Society, Lyon, France, 2023.
  16. T.S.S. Carvalho ; Nilza Maria Lopes Ribeiro; P. M. C. Torres; J.C. Almeida; João Horta Belo; Araújo J. ; António Ramos; Oliveira, Mónica S.A.; Olhero, Susana. "Development of magnetic PLA/CaP-based biocomposite for tissue engineering applications". Paper presented in ECERS 2023 - the XVIIIth Conference of the European Ceramic Society, Lyon, France, 2023.
  17. Diogo F. Costa; M. A. Silva; Olhero, Susana; P. M. C. Torres. "Interface optimization of hybrid polymer-ceramic microdevices for transdermal applications". Paper presented in Ceramics in Europe, 2022.
  18. Ribeiro, Nilza; Paula M.C. Torres; Marta Ferreira; Olhero, Susana. "Bio-inspired nanoplatelet-like structures particles of hydroxyapatite". Paper presented in Ceramics in Europe, 2022.
  19. Ribeiro, Nilza; Paula M. C. Torres; Olhero, Susana. "Toughening robocast chitosan/ceramic composite scaffolds with silk fibroin". Paper presented in Ceramics in Europe, 2022.
  20. Olhero, Susana; P. M. C. Torres; Mesquita-Guimarães, Joana; Baltazar, J. ; Pinho-da-Cruz, J.; S. Gouveia. "Structural performance of dense alumina-zirconia ceramics: an overview of conventional versus additive manufacturing". Paper presented in Materiais 2022, 2022.
  21. J.C. Almeida; Paula M.C. Torres; Olhero, Susana. "Structural characterisation of a gelatin/silica hybrid material, containing calcium, strontium and boron". Paper presented in the 31st Conference of the European Society for Biomaterials, 2021.
  22. R. Presa; I. Pintão; M. Barros; M. Araújo; Paula M.C. Torres; Pedro L. Granja; Olhero, Susana; Sousa, Aureliana. "Konjac glucomannan based 3D-printed scaffolds for bone Tissue Engineering". Paper presented in the 31st Conference of the European Society for Biomaterials, 2021.
  23. Joana Oliveira; Helena M. Ribeiro; Joana Marto; Ana filipa M. Rodrigues; António Manuel Martins da Silva; Olhero, Susana; Ana F Bettencourt; Paula M.C. Torres. "Composite ceramic microdevices: skin permeation studies". Paper presented in iMed.ULisboa Meeting 2021, 2021.
  24. A.F.M. Rodrigues; Torres, P.M.C.; M. Barros; N. Ribeiro; J.C.C. Abrantes; Ana F Bettencourt; J. H. Belo; et al. "Multifunctional sintering-free calcium phosphate based scaffolds by 3D printing". Paper presented in WBC- 1TH WORLD BIOMATERIALS CONGRESS, 2020.
  25. P. M. C. Torres. "Impact of filament patterns in the mechanical performance of dense alumina structures produced by robocasting". Paper presented in yCAM 2020 - young Ceramists Additive Manufacturing Forum 2020, 2020.
  26. P. M. C. Torres. "Flexible device of ceramic composite microneedles for transdermal drug delivery: proof of concept". Paper presented in Shaping7 - ECerS Conference, 2019.
  27. M. Silva; J. Baltazar; P. M. C. Torres; S.M.Olhero; João. Dias-de-Oliveira; J. Pinho-da-Cruz; Joana. M. Guimarães; S.Gouveia. "Zirconia-Alumina based ceramics produced by robocasting: aiming optimal mechanical properties". Paper presented in Shaping7, 2019.
  28. Presa, Rafaela; Manuel J. S. Barros; Araújo, Marco; Paula M. C. Torres; Susana M. Olhero; Granja, Pedro L.; Sousa, Aureliana. "Development of a novel 3d-scaffold to promote bone regeneration". Paper presented in 13th International Meeting of the Portuguese Carbohydrate Group – GLUPOR 13, 2019.
  29. T.S.S. Carvalho ; A.F.M. Rodrigues; P. M. C. Torres; J.C.C. Abrantes; J. H. Belo; J. S. Amaral; V. S. Amaral; S. M. Olhero. "Development of Fe-doped calcium phosphates". Paper presented in Jornadas do Ciceco 2019, 2019.
  30. T.S.S. Carvalho ; A.F.M. Rodrigues; P. M. C. Torres; J.C.C. Abrantes; J. H. Belo; J. S. Amaral; V. S. Amaral; S. M. Olhero. "Development of magnetic Fe-doped calcium phosphates". Paper presented in Materiais 2019, 2019.
  31. P. M. C. Torres; R. Amaral; D. Ramada; Ana F Bettencourt; P. Carvalho; Olhero, Susana. "Development of a ceramic composite based microneedles array for drug percutaneous administration". Paper presented in Materiais 2019, 2019.
  32. David Ramada; Torres PMC; Ana F Bettencourt; Olhero, Susana. "Promising self-setting microneedles for drug delivery". Paper presented in Jornadas CICECO 2018, 2018.
  33. P. M. C. Torres; D. Brazete; J. M. Ferreira. "Injectable bone cement based on alpha-tricalcium phosphate". Paper presented in 15th Conference & Exhibition of the European Ceramic Society (ECerS2017), 2017.
  34. P. M. C. Torres. "Calcium phosphate cements as local drug delivery". Paper presented in Materiais 2017, 2017.
  35. P. M. C. Torres. "Promising Calcium Phosphate Cements for Vertebroplasty Application". Paper presented in Jornadas CICECO 2016, 2016.
  36. P. M. C. Torres. "Porous Osteoinductive Synthetic Bone Graft Materials for Advanced Therapies". Paper presented in Jornadas CICECO 2015, 2015.
  37. P. M. C. Torres. "Influence of particle/agglomerate size on injectability of tricalcium phosphate bone cement pastes". Paper presented in ic-cmtp 2 2nd International conference on Competitive Materials and Technology Processes, 2012.
  38. P. M. C. Torres. "Osteogenic properties of Zn and ZnSr-substituted brushite cements". Paper presented in IV Portuguese-Spanish Congress on Ceramics and Glasses, 2011.
  39. P. M. C. Torres. "Influence of particle size of ß–TCP on its reactivity as raw material for bone cements". Paper presented in V Portuguese-Spanish Congress on Ceramics and Glasses, 2011.
  40. S. I. Vieira; S. Pina; R. Rego ; Torres, P.M.C.; O. A. B. da Cruz e Silva; Da Cruz E Silva, E.F.; Ferreira, J.M.F.. "Osteoconductive properties of brushite-forming Zn and ZnSr-substituted beta-tricalcium phosphate bone cements". Paper presented in 3rd EMBO Conference Series: Molecular and Cellular basis of regeneration & tissue repair, 2010.
    10.1109/mecbme.2011.5752066
  41. P. M. C. Torres. "Injectability of Zn and ZnSr-substituted ß-TCP Brushite forming cements.". Paper presented in 20th GRIBOI Congress – Interdisciplinary Research Conference on Injectable Biomaterials. Turin, Italy, 25-27 March 2010, 2010.
  42. P. M. C. Torres. "The importance of additives on emerging processing technologies of nano-ceramics". Paper presented in XIV International Clay Conference, 2009.
Journal article
  1. Alves, Manuel F.R.P.; Parente, Inês; Santos, Simão; Silva, Juliana F.G.; Miranda, Georgina; Torres, Paula M.C.; Olhero, Susana M.. "Engineering high-toughness and wear-resistant zirconia-toughened-alumina composites: the role of colloidal processing and in-situ platelet reinforcement". Ceramics International 52 23 (2026): 40382-40400. https://doi.org/10.1016/j.ceramint.2026.06.471.
    Published • 10.1016/j.ceramint.2026.06.471
  2. da Silva-Filho, José Evando; Torres, Paula Maria da Costa; Gurgel-Filho, Eduardo Diogo. Corresponding author: da Silva-Filho, José Evando. "Associations Between Imaging-Detected Pulp Calcification and Systemic Diseases: A Systematic Review, Thematic Analysis, and Meta-Analysis". International Endodontic Journal (2026): https://doi.org/10.1111/iej.70230.
    Published • 10.1111/iej.70230
  3. Torres, Paula M.C.; Jahn, Denise; Ribeiro, Nilza; Correia, Tiago R.; Coelho, Miguel; Carvalho, Tânia S.S.; Ellinghaus, Agnes; et al. "Enhancing bioactivity of calcium-phosphate cement-based 3D printed scaffolds with human platelet lysates: in vitro and in vivo validation". Acta Biomaterialia (2026): https://doi.org/10.1016/j.actbio.2025.12.014.
    Accepted • 10.1016/j.actbio.2025.12.014
  4. Fidalgo, Daniel; Rebolo, Pedro; Costa, Marcelo; Maia, João; Ramião, Nilza; Sobreiro-Almeida, Rita; Areias, Bruno; et al. "Evaluating visco-hyperelastic mechanical responses of hydrogel-based scaffolds and their potential for biomechanical restoration of the human mandibular joint". Computers in Biology and Medicine 198 (2025): 111185. https://doi.org/10.1016/j.compbiomed.2025.111185.
    Published • 10.1016/j.compbiomed.2025.111185
  5. T.S.S. Carvalho ; João Horta Belo; João C.C. Abrantes; Bañobre-López, Manuel; Diogo Lopes; Andrei V. Kovalevsky; A. Kaushal; et al. "Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia". Materials Research Bulletin (2025): https://doi.org/10.1016/j.materresbull.2024.113274.
    Published • 10.1016/j.materresbull.2024.113274
  6. F. Soares; Ribeiro, Nilza; A. Baião; P. M. C. Torres; Sarmento, Bruno; Olhero, Susana. "Sustained drug release from sintering-free calcium phosphate-based scaffolds". Journal of Drug Delivery Science and Technology 88 104906 (2023): 1-7. https://doi.org/10.1016/j.jddst.2023.104906.
    Open access • Published • Manuscript Number: JDDST-D-23-00342R1
  7. Gustavo P. Carmo; Mesquita-Guimarães, Joana; Baltazar, Joana Miguel Almeida; Olhero, Susana; Pedro Antunes; Torres, P.M.C.; Sónia Gouveia; Dias-de-Oliveira, João; Pinho-da-Cruz, J.. "Multiscale Modelling of the Thermoelastic Properties of 3D-Printed Alumina-Zirconia Ceramics". Ceramics International 49 16 (2023): 26205-26225. https://doi.org/10.1016/j.ceramint.2023.05.052.
    Published
  8. T.S.S. Carvalho ; Torres, P.M.C.; João Horta Belo; Mano, Joao F.; Olhero, Susana. Corresponding author: Olhero, Susana. "Bioactive magnetic materials in bone tissue engineering: a review of recent findings in CaP-based particles and 3D printed scaffolds". Advanced NanoBiomed Research 3 9 (2023): https://doi.org/10.1002/anbr.202300035.
    Open access • Published • 10.1002/anbr.202300035
  9. Rosa, Natacha; Vila Pouca, Maria; Paula M.C. Torres; Olhero, Susana; Natal Jorge, Renato; Parente, Marco. Corresponding author: Rosa, Natacha. "Influence of structural features in the performance of bioceramic-based composite scaffolds for bone engineering applications: A prediction study". Journal of Manufacturing Processes (2023): 391-405. https://doi.org/10.1016/j.jmapro.2023.02.012.
    Published • dx.doi.org/10.1016/j.jmapro.2023.02.012
  10. Carvalho, Tânia S.S.; Ribeiro, Nilza; P. M. C. Torres; Almeida, José C.; H. Belo, João; Araújo, J.P.; Ramos, António; Oliveira, Mónica; Olhero, Susana M.. Corresponding author: Olhero, Susana M.. "Magnetic polylactic acid-calcium phosphate-based biocomposite as a potential biomaterial for tissue engineering applications". Materials Chemistry and Physics 296 (2023): 127175. http://dx.doi.org/10.1016/j.matchemphys.2022.127175.
    Open access • Published • 10.1016/j.matchemphys.2022.127175
  11. Olhero, Susana; Paula M.C. Torres; Mesquita-Guimarães, Joana; Baltazar, Joana Miguel Almeida; Pinho-da-Cruz, J.; Sónia Cristina Alexandre Gouveia. Corresponding author: Sónia Cristina Alexandre Gouveia. "Review - Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives". Journal of Manufacturing Processes (2022): 838-879. https://doi.org/10.1016/j.jmapro.2022.02.041.
    Published • 10.1016/j.jmapro.2022.02.041
  12. Paula M.C. Torres; Ribeiro, Nilza; Carmen M. M. Nunes; Ana filipa M. Rodrigues; Sousa, Aureliana; Olhero, Susana. Corresponding author: Olhero, Susana. "Toughening robocast chitosan/biphasic calcium phosphate composite scaffolds with silk fibroin: Tuning printable inks and scaffold structure for bone regeneration". Biomaterials Advances 134 (2022): 112690. http://dx.doi.org/10.1016/j.msec.2022.112690.
    Published • 10.1016/j.msec.2022.112690
  13. Baltazar, Joana Miguel Almeida; PAIS ALVES, MANUEL FELLIPE R.; António Manuel Alves Martins; Paula M. Torres; Claudinei Santos; Olhero, Susana. Corresponding author: Claudinei Santos. "Flexural strength of 3Y-TZP bioceramics obtained by direct write assembly as function of residual connected-porosity". Journal of the Mechanical Behavior of Biomedical Materials 126 (2022): 105035-105035. https://doi.org/10.1016/j.jmbbm.2021.105035.
    Published • 10.1016/j.jmbbm.2021.105035
  14. Joana Baltazar; Paula M.C. Torres; Dias-de-Oliveira, João; Pinho-da-Cruz, J.; Sónia Cristina Alexandre Gouveia; Olhero, Susana. "Influence of filament patterning in structural properties of dense alumina ceramics printed by robocasting". Journal of Manufacturing Processes 68 (2021): 569-582. http://dx.doi.org/10.1016/j.jmapro.2021.05.043.
    Published • 10.1016/j.jmapro.2021.05.043
  15. A F M Rodrigues; P. M. C. Torres; M J S Barros; R Presa; N Ribeiro; J C C Abrantes; J H Belo; et al. Corresponding author: Olhero, Susana. "Effective production of multifunctional magnetic-sensitive biomaterial by an extrusion-based additive manufacturing technique". Biomedical Materials 16 1 (2020): 015011-015011. https://doi.org/10.1088/1748-605X/abac4c.
    Published • 10.1088/1748-605X/abac4c
  16. Marques, C.F.; Olhero, S.M.; P. M. C. Torres; Abrantes, J.C.C.; Fateixa, S.; Nogueira, H.I.S.; Ribeiro, I.A.C.; et al. Corresponding author: Ferreira, J.M.F.. "Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept". Materials Science and Engineering C 94 (2019): 426-436. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053772854&partnerID=MN8TOARS.
    Published • 10.1016/j.msec.2018.09.050
  17. Brazete, D.; Torres, P.M.C.; Abrantes, J.C.C.; Ferreira, J.M.F.. "Influence of the Ca/P ratio and cooling rate on the allotropic a¿ß-tricalcium phosphate phase transformations". Ceramics International 44 7 (2018): 8249-8256. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043448156&partnerID=MN8TOARS.
    Published • 10.1016/j.ceramint.2018.02.005
  18. Torres, P.M.C.; Marote, A.; Cerqueira, A.R.; Calado, A.J.; Abrantes, J.C.C.; Olhero, S.; Da Cruz E Silva, O.A.B.; et al. "Injectable MnSr-doped brushite bone cements with improved biological performance". Journal of Materials Chemistry B 5 15 (2017): 2775-2787. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017619627&partnerID=MN8TOARS.
    Published • 10.1039/c6tb03119f
  19. Torres, P.M.C.; Abrantes, J.C.C.; Kaushal, A.; Pina, S.; Döbelin, N.; Bohner, M.; Ferreira, J.M.F.. "Influence of Mg-doping, calcium pyrophosphate impurities and cooling rate on the allotropic a¿ß-tricalcium phosphate phase transformations". Journal of the European Ceramic Society 36 3 (2016): 817-827. http://www.scopus.com/inward/record.url?eid=2-s2.0-84955670372&partnerID=MN8TOARS.
    Published • 10.1016/j.jeurceramsoc.2015.09.037
  20. Torres, P.M.C.; Gouveia, S.; Olhero, S.; Kaushal, A.; Ferreira, J.M.F.. "Injectability of calcium phosphate pastes: Effects of particle size and state of aggregation of ß-tricalcium phosphate powders". Acta Biomaterialia 21 (2015): 204-216. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929961878&partnerID=MN8TOARS.
    Published • 10.1016/j.actbio.2015.04.006
  21. Torres, P.M.C.; Vieira, S.I.; Cerqueira, A.R.; Pina, S.; Da Cruz Silva, O.A.B.; Abrantes, J.C.C.; Ferreira, J.M.F.. "Effects of Mn-doping on the structure and biological properties of ß-tricalcium phosphate". Journal of Inorganic Biochemistry 136 (2014): 57-66. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899029859&partnerID=MN8TOARS.
    Published • 10.1016/j.jinorgbio.2014.03.013
  22. Kannan, S.; Vieira, S.I.; Olhero, S.M.; Torres, P.M.C.; Pina, S.; Da Cruz E Silva, O.A.B.; Ferreira, J.M.F.. "Synthesis, mechanical and biological characterization of ionic doped carbonated hydroxyapatite/ß-tricalcium phosphate mixtures". Acta Biomaterialia 7 4 (2011): 1835-1843. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952184588&partnerID=MN8TOARS.
    Published • 10.1016/j.actbio.2010.12.009
  23. Ganesh, I.; Reddy, G.J.; Sundararajan, G.; Olhero, S.M.; Torres, P.M.C.; Ferreira, J.M.F.. "Hydrolysis-induced aqueous gelcasting of magnesium aluminate spinel". International Journal of Applied Ceramic Technology 8 4 (2011): 873-884. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960065245&partnerID=MN8TOARS.
    Published • 10.1111/j.1744-7402.2010.02520.x
  24. Pina, S.; Vieira, S.I.; Torres, P.M.C.; Goetz-Neunhoeffer, F.; Neubauer, J.; Da Cruz E Silva, O.A.B.; Da Cruz E Silva, E.F.; Ferreira, J.M.F.. "In vitro performance assessment of new brushite-forming Zn- and ZnSr-substituted ß-TCP bone cements". Journal of Biomedical Materials Research - Part B Applied Biomaterials 94 2 (2010): 414-420. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955355856&partnerID=MN8TOARS.
    Published • 10.1002/jbm.b.31669
  25. Pina, S.; Torres, P.M.C.; Ferreira, J.M.F.. "Injectability of brushite-forming Mg-substituted and Sr-substituted a-TCP bone cements". Journal of Materials Science: Materials in Medicine 21 2 (2010): 431-438. http://www.scopus.com/inward/record.url?eid=2-s2.0-77951254880&partnerID=MN8TOARS.
    Published • 10.1007/s10856-009-3890-2
  26. Kannan, S.; Goetz-Neunhoeffer, F.; Neubauer, J.; Pina, S.; Torres, P.M.C.; Ferreira, J.M.F.. "Synthesis and structural characterization of strontium- and magnesium-co-substituted ß-tricalcium phosphate". Acta Biomaterialia 6 2 (2010): 571-576. http://www.scopus.com/inward/record.url?eid=2-s2.0-72149096015&partnerID=MN8TOARS.
    Published • 10.1016/j.actbio.2009.08.009
  27. Ganesh, I.; Jaganatha Reddy, G.; Sundararajan, G.; Olhero, S.M.; Torres, P.M.C.; Ferreira, J.M.F.. "Influence of processing route on microstructure and mechanical properties of MgAl<inf>2</inf>O<inf>4</inf> spinel". Ceramics International 36 2 (2010): 473-482. http://www.scopus.com/inward/record.url?eid=2-s2.0-71849117984&partnerID=MN8TOARS.
    Published • 10.1016/j.ceramint.2009.09.002
  28. Pina, S.; Torres, P.M.; Goetz-Neunhoeffer, F.; Neubauer, J.; Ferreira, J.M.F.. "Newly developed Sr-substituted a-TCP bone cements". Acta Biomaterialia 6 3 (2010): 928-935. http://www.scopus.com/inward/record.url?eid=2-s2.0-75149188580&partnerID=MN8TOARS.
    Published • 10.1016/j.actbio.2009.09.001
  29. Ganesh, I.; Sundararajan, G.; Olhero, S.M.; Torres, P.M.C.; Ferreira, J.M.F.. "A novel colloidal processing route to alumina ceramics". Ceramics International 36 4 (2010): 1357-1364. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950518249&partnerID=MN8TOARS.
    Published • 10.1016/j.ceramint.2010.01.022
  30. Pina, S.; Vieira, S.I.; Rego, P.; Torres, P.M.C.; da Cruz e Silva, O.A.B.; da Cruz e Silva, E.F.; Ferreira, J.M.F.. "Biological responses of brushite-forming Zn-and ZnSr-substituted ß-Tricalcium phosphate bone cements". European Cells and Materials 20 (2010): 162-177. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957166088&partnerID=MN8TOARS.
    Published
  31. Faure, J.; Balamurugan, A.; Benhayoune, H.; Torres, P.; Balossier, G.; Ferreira, J.M.F.. "Morphological and chemical characterisation of biomimetic bone like apatite formation on alkali treated Ti6Al4V titanium alloy". Materials Science and Engineering C 29 4 (2009): 1252-1257. http://www.scopus.com/inward/record.url?eid=2-s2.0-64849090851&partnerID=MN8TOARS.
    Published • 10.1016/j.msec.2008.09.047
  32. Torres, P.; Manjate, R.S.; Fernandes, H.R.; Olhero, S.M.; Ferreira, J.M.F.. "Incorporation of river silt in ceramic tiles and bricks". Industrial Ceramics 29 1 (2009): 5-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350066046&partnerID=MN8TOARS.
    Published
  33. Torres, P.; Fernandes, H.R.; Olhero, S.; Ferreira, J.M.F.. "Incorporation of wastes from granite rock cutting and polishing industries to produce roof tiles". Journal of the European Ceramic Society 29 1 (2009): 23-30. http://www.scopus.com/inward/record.url?eid=2-s2.0-53149085637&partnerID=MN8TOARS.
    Published • 10.1016/j.jeurceramsoc.2008.05.045
  34. Olhero, S.M.; Ganesh, I.; Torres, P.M.C.; Alves, F.J.; Ferreira, J.M.F.. "Aqueous colloidal processing of ZTA composites". Journal of the American Ceramic Society 92 1 (2009): 9-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-58149333692&partnerID=MN8TOARS.
    Published • 10.1111/j.1551-2916.2008.02823.x
  35. Ganesh, I.; Olhero, S.M.; Torres, P.M.C.; Ferreira, J.M.F.. "Gelcasting of magnesium aluminate spinel powder". Journal of the American Ceramic Society 92 2 (2009): 350-357. http://www.scopus.com/inward/record.url?eid=2-s2.0-60849104782&partnerID=MN8TOARS.
    Published • 10.1111/j.1551-2916.2008.02890.x
  36. Ganesh, I.; Torres, P.M.C.; Ferreira, J.M.F.. "Densification ability of combustion-derived Al2O3 powders". Ceramics International 35 3 (2009): 1173-1179. http://www.scopus.com/inward/record.url?eid=2-s2.0-59549087230&partnerID=MN8TOARS.
    Published • 10.1016/j.ceramint.2008.05.011
  37. Balamurugan, A.; Balossier, G.; Torres, P.; Michel, J.; Ferreira, J.M.F.. "Sol-gel synthesis and spectrometric structural evaluation of strontium substituted hydroxyapatite". Materials Science and Engineering C 29 3 (2009): 1006-1009. http://www.scopus.com/inward/record.url?eid=2-s2.0-64749114510&partnerID=MN8TOARS.
    Published • 10.1016/j.msec.2008.09.005
  38. Ganesh, I.; Olhero, S.M.; Torres, P.M.C.; Alves, F.J.; Ferreira, J.M.F.. "Hydrolysis-induced aqueous gelcasting for near-net shape forming of ZTA ceramic composites". Journal of the European Ceramic Society 29 8 (2009): 1393-1401. http://www.scopus.com/inward/record.url?eid=2-s2.0-62749127094&partnerID=MN8TOARS.
    Published • 10.1016/j.jeurceramsoc.2008.08.033
  39. Olhero, S.M.; Ganesh, I.; Torres, P.M.C.; Ferreira, J.M.F.. "Surface passivation of MgAl<inf>2</inf>O<inf>4</inf>spinel powder by chemisorbing H<inf>3</inf>PO<inf>4</inf>for easy aqueous processing". Langmuir 24 17 (2008): 9525-9530. http://www.scopus.com/inward/record.url?eid=2-s2.0-51449118282&partnerID=MN8TOARS.
    Published • 10.1021/la801300m
  40. Torres, P.; Manjate, R.S.; Quaresma, S.; Fernandes, H.R.; Ferreira, J.M.F.. "Development of ceramic floor tile compositions based on quartzite and granite sludges". Journal of the European Ceramic Society 27 16 (2007): 4649-4655. http://www.scopus.com/inward/record.url?eid=2-s2.0-34748816240&partnerID=MN8TOARS.
    Published • 10.1016/j.jeurceramsoc.2007.02.217
  41. Torres, P.; Fernandes, H.R.; Agathopoulos, S.; Tulyaganov, D.U.; Ferreira, J.M.F.. "Incorporation of granite cutting sludge in industrial porcelain tile formulations". Journal of the European Ceramic Society 24 10-11 (2004): 3177-3185. http://www.scopus.com/inward/record.url?eid=2-s2.0-2142750242&partnerID=MN8TOARS.
    Published • 10.1016/j.jeurceramsoc.2003.10.039
Magazine article
  1. Baltazar, Joana Miguel Almeida; Paula M.C. Torres; Dias-de-Oliveira, João; Pinho-da-Cruz, J.; Sónia Gouveia; Olhero, Susana. "Fabrico de componentes cerâmicos densos por robocasting", Revista Técnica- Revista técnica de cerâmica e Vidro, 2021
Newsletter article
  1. P. M. C. Torres. "Recycling of granite sludges in brick-type and floor tile-type ceramic formulations", Euroceram News, 2003
Thesis / Dissertation
  1. Torres, P.M.C.. "Cimentos injectáveis à base de fosfatos de cálcio para vertebroplastia". PhD, Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, 2016. http://hdl.handle.net/10773/15896.
  2. Torres, P.M.C.. "Reciclagem de Lamas de Granito Ornamental em Pastas Cerâmicas". Master, Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, 2007. http://hdl.handle.net/10773/2249.
  3. Torres, P.M.C.. "Aumento da velocidade de formação de parede no processo de conformação por enchimento (Increase in the rate of wall formation in the filling forming process)". Degree, 2004.

Intellectual property

Patent
  1. P. M. C. Torres; Olhero, Susana; T.S.S. Carvalho ; Manuel António Martins da Silva; Ana filipa M. Rodrigues. 2026. "Dispositivo transdérmico flexível, respetivo método de obtenção e suas aplicações". Portugal.
    Granted/Issued
  2. Olhero, Susana; Paula M.C. Torres; T.S.S. Carvalho ; Ribeiro, Nilza. 2024. "Pasta magnética compreendendo pó cerâmico magnético para manufactura aditiva por técnica de extrusão". Portugal.
    Granted/Issued