???global.info.a_carregar???
Education activity - Teaching Polymer Processing, Rheology and Eco-Design subjects, in the frame of several Master (Polymer Engineering, Materials Engineering, Mechanical Engineering and European Master in Rheology - EuRheo), Graduation (Chemistry, Product Design) and Doctoral Programs (Polymer and Composites Engineering and Science, Materials). Member of the Pedagogical Council of the Architecture School of University of Minho (UM). Research & Development activity - Researcher of the Institute for Polymers and Composites (IPC) and associated researcher of the Digital Transformation (DTx) Colaborative Lab where she coordinates the prospective project ‘Value and Risk Analysis of Cyber-Physical Systems’. Researcher of past projects with direct funding in collaboration with several National (FIBOPE, EFAPEL, SOPREFA, BRISA, PROBOS, IBERFIBRAN, JOALPE, SOCIMORCASAL, PRIMOR) and International (PANIPOL, ELECTROVAC, ARKEMA, JOHNSON & JOHNSON, INTERTAPE, BOREALIS, LIGHTWEIGHT STRUCTURES, APPLIED SCIENCES) companies focusing on extrusion die and calibrators design, development of new products, extrusion of pharmaceuticals and preparation/optimization of nanofibers/thermoplastic composites. Principal Investigator of 2 past scientific projects, funded by Fundação para a Ciência e a Tecnologia (FCT) and member of the research team of several other projects of the same type. Member of the research team of the following ongoing/recently ended funded (European Regional Development Fund, FEDER) projects carried out with industry: • Better Plastics – Plastics in a circular economy, Mobilizer project – ongoing (plastics films for food packaging) • S4PLAST – Sustainable Plastics Advanced Solutions, Mobilizer project – ongoing (plastics recycling, and solutions for improving recyclability) • FAMEST, Footwear, Advanced Materials, Equipment and Software - Mobilizer project (development of 3D printed functional structures) – ended (30/11/2021) • MobFood, Mobilizing scientific and technological knowledge in response to the challenges of the agri-food market - Mobilizer project (plastics films for food packaging) – ended (01/05/2021) Member of the research team of the ongoing FCT funded project ESC4SHI – Simulation and Efficient Computation for the Health, Sea and Industry, PTDC/MAT-APL/28118/2017, POCI-01-0145-FEDER-028118 (heat transfer in calibrators/cooling systems for plastics profiles) Supervisor of 7 Phd (5 completed) and 35 MSc theses (31 completed), and of several researchers in the frame of industrial and scientific projects. Management activity - • National scientific coordinator of the MIT-Portugal Program Engineering Design and Advanced Manufacturing (EDAM) focus area from November 2009 to March 2015. • Director, at UM, of the Doctoral Program Leaders for Technical Industries (LTI) of the MIT-Portugal Program from November 2009 to March 2015. • Member of the Admninistration Board of the Innovation Pole in Polymer Engineering (PIEP), from November 2009 to March 2013. • Member of the Admninistration Board of the Centre for Excellence and Innovation in the Automotive Industry (CEiiA), from December 2010 to March 2013. • Vice-President of the Engineering School Council of the University of Minho, from January 2010 to October 2012; President of the same council from October 2012 to March 2013. Member of this council since 2019. • Head of the Department of Polymer Engineering of the University of Minho from 2007 to 2010, from 2013 to 2016, and in 2019. Publications She edited 2 books, and is the author or co-author of 14 book chapters, 76 papers published in international refereed journals, 4 national (PT) patents and 182 communications presented in international conferences.
Read full resume ↓
Identification

Personal identification

Full name
Olga Machado de Sousa Carneiro

Citation names

  • Carneiro, Olga
  • O. S. Carneiro
  • Olga S. Carneiro
  • Olga Sousa Carneiro

Author identifiers

Ciência ID
0B14-E1C3-C7BF
ORCID iD
0000-0001-5384-0028
Google Scholar ID
http://scholar.google.pt/citations?user=PDrQApkAAAAJ&hl=pt-PT
Researcher Id
http://www.researcherid.com/rid/J-3743-2013
Scopus Author Id
7004283519

Knowledge fields

  • Engineering and Technology - Materials Engineering - Materials Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Spanish; Castilian Intermediate (B1) Advanced (C1) Beginner (A1) Intermediate (B1)
French Intermediate (B1) Intermediate (B1) Beginner (A1) Intermediate (B1)
Education
Degree Classification
2014
Concluded
 na (Título de Agregado)
Universidade do Minho Escola de Engenharia, Portugal
"Design of Forming Tools for the Extrusion of Thermoplastic Profiles" (THESIS/DISSERTATION)
 Aprovada por unanimidade
1994
Concluded
 Ciência e Engenharia de Polímeros (Doutoramento)
Major in Sem especialidade
Universidade do Minho, Portugal
"Concepção de Cabeças de Extrusão de Tubos" (THESIS/DISSERTATION)
1994
Concluded
 n/a (Doutoramento)
Universidade do Minho Escola de Engenharia, Portugal
"Design of Pipe Extrusion Dies (in Portuguese)" (THESIS/DISSERTATION)
 Unanimidade com Distinção e Louvor (unanimity)
1987
Concluded
 n/a PAPCP (Mestrado)
Universidade do Minho Escola de Engenharia, Portugal
"Characterisation of Polymer Melt Flows by Capillary Rheometry (in Portuguese)" (THESIS/DISSERTATION)
 Muito Bom (Very Good)
1985
Concluded
 Engenharia de Produção - Ramo: Transformação de Matérias Plásticas (Licenciatura)
Universidade do Minho Escola de Engenharia, Portugal
"n/a" (THESIS/DISSERTATION)
 16 valores
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2001/12/19 - Current Associate Professor (University Teacher) Universidade do Minho, Portugal
1994/10/20 - 2001/12/18 Assistant Professor (University Teacher) Universidade do Minho - Campus de Azurém, Portugal
Universidade do Minho - Campus de Azurém, Portugal
1987/09/09 - 1994/10/19 Assistant (University Teacher) Universidade do Minho, Portugal
Universidade do Minho - Campus de Azurém, Portugal
1985/03/01 - 1987/09/08 Trainee Assistant (University Teacher) Universidade do Minho, Portugal
Universidade do Minho - Campus de Azurém, Portugal

Other Careers

Category
Host institution 		Employer
1982/10/01 - 1985/03/31 Técnico Superior (Técnico Superior) TMG Automotive, Portugal
TMG Automotive, Portugal
Projects

Contract

Designation Funders
2018/12/14 - 2022/12/13 Simulação e Computação eficiente para a Saúde, o Mar e a Indústria
PTDC/MAT-APL/28118/2017
Universidade do Minho, Portugal

FCiênciasID Associação para a Investigação e Desenvolvimento de Ciências, Portugal

Universidade do Minho, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2016/01/01 - 2019/12/31 Introdução de tecnonogias baseadas em materiais avançados nas indústrias da mobilidade.
MITP-TB/PFM/0005/2013
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013/04/01 - 2015/08/31 Rose4Pack- Embalagem biodegradável activa com extracto de alecrim Rosmarinus officinalis L. para incrementar a vida útil dos alimentos
PTDC/AGR-TEC/3366/2012
Universidade do Porto Instituto de Ciências e Tecnologias Agrárias e Agro-Alimentares, Portugal

Universidade do Porto Centro de Estudos de Ciencia Animal, Portugal

Universidade do Minho, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/04/02 - 2015/08/01 simulação numérica de um escoamente tridimensional de polimeros e aplicação a o molde
PTDC/MAT/121185/2010
Universidade do Minho, Portugal

Universidade do Minho Centro de Matemática, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/03/01 - 2014/10/31 IProExt - Sistema integrado para o projecto automático de ferramentas produtivas de perfis extrudidos
PTDC/EME-MFE/113988/2009
Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal

Universidade do Minho, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013/09/01 - 2013/11/30 DESIGN DE PRODUTO@UMINHO
SFRH/BSAB/1350/2013
Universidade do Minho, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2010/05/01 - 2013/10/31 OPTIMCOOL - Optimização do arrefecimento/calibração de perfis termoplásticos durante a extrusão
PTDC/EME-MFE/102729/2008
Universidade do Minho, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2008/01/01 - 2011/06/30 Filmes poliméricos biodegradáveis de elevado desempenho
PTDC/CTM/67025/2006
Universidade do Minho, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/05/01 - 2008/12/31 Compósitos Microfibrilares Baseados em Misturas de Polímeros Termoplásticos Virgens ou Reciclados
POCI/CTM/57358/2004
Universidade do Minho, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/07/18 - 2008/11/18 Concepção automática de cabeças de extrusão para a produção de perfis para aplicações de elevada especificação
POCI/EME/58657/2004
Universidade do Minho, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/11/01 - 2007/10/31 RECPET - Prevenção de poluição na fonte através da despolimerização contínua de polietileno teraftalato
POCI/AMB/59870/2004
Universidade do Minho, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Journal article
  1. Rui M. Lima; Valquíria Villas-Boas; Filomena Soares; Olga S. Carneiro; Paulo Ribeiro; Diana Mesquita. "Mapping the implementation of active learning approaches in a school of engineering – the positive effect of teacher training". European Journal of Engineering Education (2024): https://doi.org/10.1080/03043797.2024.2313541.
    10.1080/03043797.2024.2313541
  2. Ana G. Azevedo; Carolina Barros; Sónia Miranda; Ana V. Machado; Olga S. Carneiro; Bruno Silva; Mariana A. Andrade; et al. "Active Low-Density Polyethylene-Based Films by Incorporating a-Tocopherol in the Free State and Loaded in PLA Nanoparticles: A Comparative Study". Foods (2024): https://doi.org/10.3390/foods13030475.
    10.3390/foods13030475
  3. Marcelo Matos Martins; Sara Javadi; José António Covas; Olga Sousa Carneiro; João Miguel Nóbrega. "New insights on the layer uniformity of multilayered films produced by coextrusion with interfacial surface generators". Polymer Engineering & Science (2024): https://doi.org/10.1002/pen.26576.
    10.1002/pen.26576
  4. Luís D. Pedroso; António J. Pontes; António Alves; Fernando M. Duarte; Olga S. Carneiro. "From Transparent to Opaque: A Route towards Multifunctional Parts Injected with a Single Material". Materials (2023): https://doi.org/10.3390/ma16186219.
    10.3390/ma16186219
  5. P. Cunha; R. Teixeira; O. S. Carneiro; A. F. Silva. "Multi-material fused filament fabrication: an expedited methodology to assess the affinity between different materials". Progress in Additive Manufacturing (2023): https://doi.org/10.1007/s40964-022-00322-6.
    10.1007/s40964-022-00322-6
  6. Pedro C. Gomes; Oscar G. Piñeiro; Alexandra C. Alves; Olga S. Carneiro. "On the Reuse of SLS Polyamide 12 Powder". Materials (2022): https://doi.org/10.3390/ma15165486.
    10.3390/ma15165486
  7. Ana G. Azevedo; Carolina Barros; Sónia Miranda; Ana Vera Machado; Olga Castro; Bruno Silva; Margarida Saraiva; et al. "Active Flexible Films for Food Packaging: A Review". Polymers 14 12 (2022): 2442-2442. https://doi.org/10.3390/polym14122442.
    10.3390/polym14122442
  8. Mohammadreza Aali; Olga Sousa Carneiro; João Miguel Nóbrega. "Profile extrusion die design: A comparative study between elastic and inelastic fluids". Polymer Engineering & Science 62 2 (2022): 497-509. https://doi.org/10.1002/pen.25862.
    10.1002/pen.25862
  9. Mohammadreza Aali; Célio Fernandes; Olga Sousa Carneiro; João Miguel Nóbrega. "Using Computational Modelling to Study Extensional Rheometry Tests for Inelastic Fluids". Fluids (2021): https://doi.org/10.3390/fluids6120464.
    10.3390/fluids6120464
  10. Carina Peixoto; Andrea Zille; Alexandre Ferreira da Silva; Olga Sousa Carneiro. "Shape memory polymers as actuators: Characterization of the relevant parameters under constrained recovery". Polymer Engineering & Science (2021): https://doi.org/10.1002/pen.25778.
    10.1002/pen.25778
  11. Ahmad Fakhari; Željko Tukovic; Olga Sousa Carneiro; Célio Fernandes. "An Effective Interface Tracking Method for Simulating the Extrudate Swell Phenomenon". Polymers 13 8 (2021): 1305-1305. https://doi.org/10.3390/polym13081305.
    10.3390/polym13081305
  12. Teixeira, Rafaela Marisa Fernandes; Coelho, Carlos; Oliveira, João; Gomes, Joana; Pinto, Vera Vaz; Ferreira, Maria José; Nóbrega, J. M.; Ferreira da Silva, Alexandre; Carneiro, O. S.. "Towards customized footwear with improved comfort". (2021): http://hdl.handle.net/1822/73286.
    10.3390/ma14071738
  13. A. Rajkumar; F. Habla; C. Fernandes; S. Mould; A. Sacramento; O.S. Carneiro; J.M. Nóbrega. "Profile Extrusion: Experimental Assessment of a Numerical Code to Model the Temperature Evolution in the Cooling/Calibration Stage". Polymer Engineering & Science 59 11 (2019): 2367-2376. https://doi.org/10.1002/pen.25240.
    10.1002/pen.25240
  14. Fernandes, C.; Faroughi, S. A.; Carneiro, O. S.; Nóbrega, J. M.; McKinley, G. H.. "Fully-resolved simulations of particle-laden viscoelastic fluids using an immersed boundary method". (2019): http://hdl.handle.net/1822/63456.
    10.1016/j.jnnfm.2019.02.007
  15. Ribeiro, Micaela; Carneiro, O. S.; Ferreira da Silva, Alexandre. "Interface geometries in 3D multi-material prints by fused filament fabrication". (2019): http://hdl.handle.net/1822/67948.
    10.1108/RPJ-05-2017-0107
  16. Fernandes, Célio; Ferrás, Luís Jorge Lima; Habla, Florian; Carneiro, O. S.; Nóbrega, J. M.. "Implementation of partial slip boundary conditions in an open-source finite-volume-based computational library". (2019): http://hdl.handle.net/1822/63464.
    10.1515/polyeng-2018-0343
  17. Costa, Ana Elisa; Ferreira da Silva, Alexandre; Carneiro, O. S.. "A study on extruded filament bonding in fused filament fabrication". (2019): http://hdl.handle.net/1822/67949.
    10.1108/RPJ-03-2018-0062
  18. Fernandes, C.; Vukcevic, V.; Uroic, T.; Simões, Ricardo João Ferreira; Carneiro, O. S.; Jasak, H.; Nóbrega, J. M.. "A coupled finite volume flow solver for the solution of incompressible viscoelastic flows". (2019): http://hdl.handle.net/1822/63450.
    10.1016/j.jnnfm.2019.01.006
  19. Ferrás, Luís Jorge Lima; Sitotaw, Yalew; Fernandes, Célio Bruno Pinto; Nóbrega, J. M.; Carneiro, O. S.. "A numerical and experimental study on weld lines formation and strength in extrusion". (2018): http://hdl.handle.net/1822/59430.
    10.1002/pen.24551
  20. Rajkumar, Ananth; Ferrás, L. L.; Fernandes, G.; Carneiro, O. S.; Sacramento, A.; Nóbrega, J. M.. "An open-source framework for the computer aided design of complex profile extrusion dies". (2018): http://hdl.handle.net/1822/59429.
    10.3139/217.3514
  21. Rajkumar, Ananth; Ferrás, Luís Jorge Lima; Fernandes, Célio Bruno Pinto; Carneiro, O. S.; Nóbrega, J. M.. "Guidelines for balancing the flow in extrusion dies: the influence of the material rheology". (2018): http://hdl.handle.net/1822/59428.
    10.1515/polyeng-2016-0449
  22. Lopes, L. R.; Ferreira da Silva, Alexandre; Carneiro, O. S.. "Multi-material 3D printing: the relevance of materials affinity on the boundary interface performance". (2018): http://hdl.handle.net/1822/59374.
    10.1016/j.addma.2018.06.027
  23. Marques, Filipe; Clain, Stéphane; Machado, Gaspar J.; Martins, Bruno; Carneiro, O. S.; Nóbrega, J. M.. "A new energy conservation scheme for the numeric study of the heat transfer in profile extrusion calibration". (2017): http://hdl.handle.net/1822/47543.
    10.1007/s00231-017-2023-6
  24. Khaliq, Muhammad Hussam; Gomes, Rui; Fernandes, Célio Bruno Pinto; Nóbrega, J. M.; Carneiro, O. S.; Ferrás, Luís Jorge Lima. "On the use of high viscosity polymers in the fused filament fabrication process". (2017): http://hdl.handle.net/1822/47547.
    10.1108/RPJ-02-2016-0027
  25. Rajkumar, A.; Ferrás, Luís Jorge Lima; Fernandes, C.; Carneiro, O. S.; Becker, M.; Nóbrega, J. M.. "Design guidelines to balance the flow distribution in complex profile extrusion dies". (2017): http://hdl.handle.net/1822/47549.
    10.3139/217.3272
  26. Carneiro, O. S.; Mota, A. R.; Sitotaw, Y.; Nóbrega, J. M.. "Prototype system to study the effect of weld lines on the performance of extruded profiles". (2016): http://hdl.handle.net/1822/47546.
    10.3139/217.3200
  27. Habla, Florian; Fernandes, C.; Maier, Maximilian; Densky, Lennart; Ferrás, Luís Jorge Lima; Rajkumar, Ananth; Carneiro, O. S.; Hinrichsen, Olaf; Nóbrega, J. M.. "Development and validation of a model for the temperature distribution in the extrusion calibration stage". (2016): http://hdl.handle.net/1822/47545.
    10.1016/j.applthermaleng.2016.01.166
  28. Marques, Pedro Filipe Lima; Clain, Stéphane; Machado, Gaspar J.; Martins, Bruno Diogo; Carneiro, O. S.; Nóbrega, J. M.. "A novel heat transfer coefficient identification methodology for the profile extrusion calibration stage". (2016): http://hdl.handle.net/1822/43614.
    10.1016/j.applthermaleng.2016.04.013
  29. Carneiro, O. S.; Ferreira da Silva, Alexandre; Gomes, Rui. "Fused deposition modeling with polypropylene". (2015): http://hdl.handle.net/1822/39004.
    10.1016/j.matdes.2015.06.053
  30. Gonçalves, N. D.; Pereira, S. P.; Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Carneiro, O. S.. "Using the GPU to design complex profile extrusion dies". (2015): http://hdl.handle.net/1822/38704.
    10.3139/217.2957
  31. N. D. Gonçalves; P. Teixeira; L. L. Ferrás; A. M. Afonso; J. M. Nóbrega; O. S. Carneiro. "Design and optimization of an extrusion die for the production of wood-plastic composite profiles". (2015): https://hdl.handle.net/10216/105604.
    10.1002/pen.24024
  32. Gonçalves, Nelson Daniel Ferreira; Teixeira, P.; Ferrás, Luís Jorge Lima; Afonso, A. M.; Nóbrega, J. M.; Carneiro, O. S.. "Design and optimization of an extrusion die for the production of wood–plastic composite profiles". (2015): http://hdl.handle.net/1822/38706.
    10.1002/pen.24024
  33. Tomé, M.F.; Castelo, A.; Nóbrega, J.M.; Carneiro, O.S.; Paulo, G.S.; Pereira, F.T.. "Numerical and experimental investigations of three-dimensional container filling with Newtonian viscous fluids". Computers and Fluids 90 (2014): 172-185. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890849808&partnerID=MN8TOARS.
    10.1016/j.compfluid.2013.11.015
  34. L. L. Ferrás; A. M. Afonso; M. A. Alves; J. M. Nóbrega; O. S. Carneiro; F. T. Pinho. "Slip flows of Newtonian and viscoelastic fluids in a 4:1 contraction". (2014): https://hdl.handle.net/10216/87797.
    10.1016/j.jnnfm.2014.09.007
  35. Ferrás, Luís Jorge Lima; Afonso, A. M.; Alves, M. A.; Nóbrega, J. M.; Pinho, F. T.; Carneiro, O. S.. "Slip flows of Newtonian and viscoelastic fluids in a 4:1 contraction". (2014): http://hdl.handle.net/1822/38379.
    10.1016/j.jnnfm.2014.09.007
  36. Gonçalves, N.D.; Ribau, A.M.; Carneiro, O.S.; Nóbrega, J.M.. "Computer aided design of extrusion dies for complex geometry profiles". Materials Science Forum 730-732 (2013): 495-500. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870742730&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.495
  37. Ribau, A.M.; Gonçalves, N.D.; Silva, C.; Nóbrega, J.M.; Carneiro, O.S.. "Modeling the calibration/cooling stage of complex thermoplastic profiles". Materials Science Forum 730-732 (2013): 537-542. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870745619&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.537
  38. Carneiro, O.S.; Ferrás, L.L.; Pinho, F.T.; Nóbrega, J.M.. "Effect of polymer melt wall slip on the flow balance of profile extrusion dies". AIP Conference Proceedings 1526 (2013): 59-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876947811&partnerID=MN8TOARS.
    10.1063/1.4802603
  39. Carneiro, O.S.; Nóbrega, J.M.; Mota, A.R.; Silva, C.. "Prototype and methodology for the characterization of the polymer-calibrator interface heat transfer coefficient". Polymer Testing 32 6 (2013): 1154-1161. http://www.scopus.com/inward/record.url?eid=2-s2.0-84881279317&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2013.07.006
  40. Gonçalves, N.D.; Carneiro, O.S.; Nóbrega, J.M.. "Design of complex profile extrusion dies through numerical modeling". Journal of Non-Newtonian Fluid Mechanics 200 (2013): 103-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-84881030148&partnerID=MN8TOARS.
    10.1016/j.jnnfm.2013.02.007
  41. Gaspar-Cunha, A.; Carneiro, O.S.; Cunha, S.M.; Covas, J.A.. "Laboratory modular instrumented single screw extruder for optimisation of polymer processing". Plastics, Rubber and Composites 41 9 (2012): 373-383. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869014962&partnerID=MN8TOARS.
    10.1179/1743289812Y.0000000006
  42. Carneiro, O.S.; Covas, J.A.; Domingues, C.. "Biaxially oriented blown film technology searching for suitable polymers and processing conditions". International Polymer Processing 27 3 (2012): 348-356. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863815685&partnerID=MN8TOARS.
    10.3139/217.2538
  43. Carneiro, O.S.; Covas, J.A.; Reis, R.; Brulé, B.; Flat, J.J.. "The effect of processing conditions on the characteristics of electrically conductive thermoplastic composites". Journal of Thermoplastic Composite Materials 25 5 (2012): 607-629. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864341059&partnerID=MN8TOARS.
    10.1177/0892705711417032
  44. Dencheva, N.; Jovita Oliveira, M.; Carneiro, O.S.; Pouzada, A.S.; Denchev, Z.. "Preparation, structural development, and mechanical properties of microfibrillar composite materials based on polyethylene/polyamide 6 oriented blends". Journal of Applied Polymer Science 115 5 (2010): 2918-2932. http://www.scopus.com/inward/record.url?eid=2-s2.0-73949097290&partnerID=MN8TOARS.
    10.1002/app.31389
  45. Yamanoi, M.; Leer, C.; van Hattum, F.W.J.; Carneiro, O.S.; Maia, J.M.. "Direct fibre simulation of carbon nanofibres suspensions in a Newtonian fluid under simple shear". Journal of Colloid and Interface Science 347 2 (2010): 183-191. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953230628&partnerID=MN8TOARS.
    10.1016/j.jcis.2010.03.069
  46. Nóbrega, J.M.; Pereira, S.P.; Carneiro, O.S.. "Profile extrusion dies: The effect of machining inaccuracies on flow balance and its dependence on the design strategy used". AIP Conference Proceedings 1152 (2009): 270-276. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449884938&partnerID=MN8TOARS.
    10.1063/1.3203277
  47. Dencheva, N.; Oliveira, M.J.; Carneiro, O.; Nunes, T.G.; Denchev, Z.. "Preparation and properties of novel in-situ composite materials based on polyethylene-polyamide oriented blends". Materials Science Forum 587-588 (2008): 515-519. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349118113&partnerID=MN8TOARS.
  48. Leer, C.; Lake, P.; Gupta, R.; Agarwal, S.; Kennel, E.; Carneiro, O.; Van Hattum, F.. "CNF/HDPE composites by tailored-shear extrusion". International SAMPE Symposium and Exhibition (Proceedings) 52 (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-57649089125&partnerID=MN8TOARS.
  49. Yamanoi, M.; Leer, C.; Van Hattum, F.W.J.; Carneiro, O.S.; Maia, J.M.. "Simulating the dispersion of carbon nanofibers in polymer composites". International SAMPE Symposium and Exhibition (Proceedings) 52 (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-57649090846&partnerID=MN8TOARS.
  50. Carneiro, O.S.; Reis, R.; Covas, J.A.. "Small-scale production of co-extruded biaxially oriented blown film". Polymer Testing 27 4 (2008): 527-537. http://www.scopus.com/inward/record.url?eid=2-s2.0-43049156090&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2008.02.010
  51. Nóbrega, J.M.; Carneiro, O.S.; Gaspar-Cunha, A.; Gonca¸lves, N.D.. "Design of calibrators for profile extrusion - Optimizing multi-step systems". International Polymer Processing 23 3 (2008): 331-338. http://www.scopus.com/inward/record.url?eid=2-s2.0-47549100677&partnerID=MN8TOARS.
    10.3139/217.2148
  52. Faria, R.P.; Carneiro, O.S.; Nóbrega, J.M.; Ritto, M.K.. "Design and optimisation of a blow moulded container". Materials Science Forum 587-588 (2008): 510-514. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349125226&partnerID=MN8TOARS.
  53. Leer, C.; Van Hattum, F.W.J.; Carneiro, O.S.; Lanceros-Mendez, S.. "On the dispersion of carbon nanofibre-based suspensions in simple shear: An experimental study". Materials Science Forum 587-588 (2008): 192-196. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349124953&partnerID=MN8TOARS.
  54. Carneiro, O.S.; Oliveira, M.J.; Martins, R.L.. "Effect of pinch-off welding on quality of food packaging bottle". Plastics, Rubber and Composites 36 4 (2007): 173-178. http://www.scopus.com/inward/record.url?eid=2-s2.0-35348961487&partnerID=MN8TOARS.
    10.1179/174328907X191387
  55. Van Hattum, F.W.J.; Leer, C.; Carneiro, O.S.. "Shear processing of carbon nanofibre epoxide composites: Modelling and characterisation". International SAMPE Technical Conference (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-57649086430&partnerID=MN8TOARS.
  56. Leer, C.; Van Hattum, F.W.J.; Gaspar-Cunha, A.; Carneiro, O.S.; Beyer, G.; Lake, P.; Lake, M.. "Effect of tailored-shear extrusion on the morphology-property relationship in nylon 6/CNF composites". International SAMPE Symposium and Exhibition (Proceedings) 52 (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-34748877155&partnerID=MN8TOARS.
  57. Leer, C.; Van Hattum, F.W.J.; Gaspar-Cunha, A.; Carneiro, O.S.; Bernardo, C.A.. "Tailored shear extrusion of carbon nanofibre/polyamide composites and its effect on electrical percolation threshold". Plastics, Rubber and Composites 35 6-7 (2006): 268-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750595258&partnerID=MN8TOARS.
    10.1179/174328906X146531
  58. Van Hattum, F.W.J.; Leer, C.; Viana, J.C.; Carneiro, O.S.; Lake, M.L.; Bernardo, C.A.. "Conductive long fibre reinforced thermoplastics by using carbon nanofibres". Plastics, Rubber and Composites 35 6-7 (2006): 247-252. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750589595&partnerID=MN8TOARS.
    10.1179/174328906X146504
  59. Nóbrega, J.M.; Carneiro, O.S.. "Optimising cooling performance of calibrators for extruded profiles". Plastics, Rubber and Composites 35 9 (2006): 387-392. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751194076&partnerID=MN8TOARS.
    10.1179/174328906X128216
  60. Nóbrega, J.M.; Carneiro, O.S.; Gaspar-Cunha, A.. "Optimising the calibration system layout in profile extrusion". Proceedings of the 5th International Conference on Engineering Computational Technology (2006): http://www.scopus.com/inward/record.url?eid=2-s2.0-84858666234&partnerID=MN8TOARS.
  61. Leer, C.; Van Hattum, F.W.J.; Carneiro, O.S.. "Conductive composites of long fiber reinforced thermoplastics with carbon nanofibers". International SAMPE Technical Conference (2006): http://www.scopus.com/inward/record.url?eid=2-s2.0-36448936044&partnerID=MN8TOARS.
  62. Carneiro, O.S.; Viana, J.C.; Nóbrega, J.M.. "Processing-microstructure-properties relationships in extrusion of thermoplastics". Materials Science Forum 514-516 PART 2 (2006): 833-837. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849034868&partnerID=MN8TOARS.
  63. Van Hattum, F.; Leer, C.; Carneiro, O.; Maruyama, B.. "Quantitative assessment of mixing quality in nanoreinforced polymers using a multi-scale image analysis method". International SAMPE Technical Conference (2006): http://www.scopus.com/inward/record.url?eid=2-s2.0-36448946156&partnerID=MN8TOARS.
  64. Nóbrega, J.M.; Carneiro, O.S.. "Improving profile cooling through modelling". Materials Science Forum 514-516 PART 2 (2006): 1429-1433. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751183438&partnerID=MN8TOARS.
  65. Nóbrega, J.M.; Carneiro, O.S.. "Strategies to balance the flow in profile extrusion dies". Annual Technical Conference - ANTEC, Conference Proceedings 2 (2006): 867-871. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745628367&partnerID=MN8TOARS.
  66. Carneiro, O.S.; Nóbrega, J.M.. "Improving the efficiency of the calibration stage in the production of extruded profiles". Annual Technical Conference - ANTEC, Conference Proceedings 2 (2006): 856-860. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745630973&partnerID=MN8TOARS.
  67. Carneiro, O.S.; Viana, J.C.; Nóbrega, J.M.. "Study on processing-microstructure-properties relationships of extruded profiles". Plastics, Rubber and Composites 35 4 (2006): 173-180. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748847193&partnerID=MN8TOARS.
    10.1179/174328906X103114
  68. Nóbrega, J.M.; Carneiro, O.S.. "Design of profile extrusion dies: An automatic approach". Proceedings of the 5th International Conference on Engineering Computational Technology (2006): http://www.scopus.com/inward/record.url?eid=2-s2.0-84858663091&partnerID=MN8TOARS.
  69. Covas, J.A.; Bernardo, C.A.; Carneiro, O.S.; Maia, J.M.; Van Hattum, F.W.J.; Gaspar-Cunha, A.; Biró, L.P.; et al. "Continuous production of polycarbonate-carbon nanotube composites". Journal of Polymer Engineering 25 1 (2005): 39-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-20144371596&partnerID=MN8TOARS.
  70. Covas, J. A.; Bernardo, C. A.; Carneiro, O. S.; Maia, J. M.; Van Hattum, F. W J; Gaspar-Cunha, A.; Biró, L. P.; et al. "Continuous production of polycarbonate-carbon nanotube composites". (2005): http://hdl.handle.net/1822/12556.
    10.1515/POLYENG.2005.25.1.39
  71. Nóbrega, J.M.; Pinho, F.T.; Oliveira, P.J.; Carneiro, O.S.. "Accounting for temperature-dependent properties in viscoelastic duct flows". International Journal of Heat and Mass Transfer 47 6-7 (2004): 1141-1158. http://www.scopus.com/inward/record.url?eid=2-s2.0-0346056659&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2003.10.004
  72. Carneiro, O.S.; Nóbrega, J.M.; Pinho, F.T.; Oliveira, P.J.. "Automatic balancing of profile extrusion dies: Experimental assessment". Annual Technical Conference - ANTEC, Conference Proceedings 1 (2004): 91-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442552775&partnerID=MN8TOARS.
  73. Carneiro, O.S.; Nóbrega, J.M.; Covas, J.A.; Oliveira, P.J.; Pinho, F.T.. "A study on the thermal performance of calibrators". Annual Technical Conference - ANTEC, Conference Proceedings 1 (2004): 251-255. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442441872&partnerID=MN8TOARS.
  74. Covas, J.A.; Carneiro, O.S.; Costa, P.; Machado, A.V.; Maia, J.M.. "Online monitoring techniques for studying evolution of physical, rheological and chemical effects along the extruder". Plastics, Rubber and Composites 33 1 (2004): 55-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042820633&partnerID=MN8TOARS.
    10.1179/146580104225018300
  75. Nóbrega, J.M.; Carneiro, O.S.; Pinho, F.T.; Oliveira, P.J.. "Flow balancing in extrusion dies for thermoplastic profiles, Part III: Experimental assessment". International Polymer Processing 19 3 (2004): 225-235. http://www.scopus.com/inward/record.url?eid=2-s2.0-7944221334&partnerID=MN8TOARS.
  76. Carneiro, O.S.; Covas, J.A.; Ferreira, J.A.; Cerqueira, M.F.. "On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruder". Polymer Testing 23 8 (2004): 925-937. http://www.scopus.com/inward/record.url?eid=2-s2.0-4544387833&partnerID=MN8TOARS.
    10.1016/j.polymertesting.2004.05.001
  77. Carneiro, O.S.; Nóbrega, J.M.. "Recent developments in automatic die design for profile extrusion". Plastics, Rubber and Composites 33 9-10 (2004): 400-408. http://www.scopus.com/inward/record.url?eid=2-s2.0-20444462396&partnerID=MN8TOARS.
    10.1179/174328904X24907
  78. Nóbrega, J.M.; Carneiro, O.S.; Covas, J.A.; Pinho, F.T.; Oliveira, P.J.. "Design of calibrators for extruded profiles. Part I: Modeling the thermal interchanges". Polymer Engineering and Science 44 12 (2004): 2216-2228. http://www.scopus.com/inward/record.url?eid=2-s2.0-10844271650&partnerID=MN8TOARS.
    10.1002/pen.20249
  79. Denchev, Z.; Oliveira, M.J.; Carneiro, O.S.. "Nanostructured Composites Based on Polyethylene-Polyamide Blends. I. Preparation and Mechanical Behavior". Journal of Macromolecular Science - Physics 43 B 1 (2004): 143-162. http://www.scopus.com/inward/record.url?eid=2-s2.0-1642386104&partnerID=MN8TOARS.
  80. Nóbrega, J. M.; Carneiro, O. S.; Pinho, Fernando; Oliveira, Paulo J.. "Flow balancing in extrusion dies for thermoplastic profiles. Part III: Experimental Assessment". (2004): http://hdl.handle.net/10400.6/597.
  81. Nóbrega, J. M.; Carneiro, O. S.; Covas, J. A.; Pinho, Fernando; Oliveira, Paulo J.. "Design of calibrators for extruded profiles. Part I: modelling the thermal interchanges". (2004): http://hdl.handle.net/10400.6/627.
  82. Nóbrega, J.M.; Carneiro, O.S.; Oliveira, P.J.; Pinho, F.T.. "Flow balancing in extrusion dies for thermoplastic profiles: Part I: Automatic design". International Polymer Processing 18 3 (2003): 298-306. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141929539&partnerID=MN8TOARS.
  83. Nóbrega, J.M.; Carneiro, O.S.; Oliveira, P.J.; Pinho, F.T.. "Sensitivity of flow distribution and flow patterns in profile extrusion dies". Annual Technical Conference - ANTEC, Conference Proceedings 1 (2003): 310-314. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141618304&partnerID=MN8TOARS.
  84. Poulesquen, A.; Vergnes, B.; Cassagnau, P.; Michel, A.; Carneiro, O.S.; Covas, J.A.. "A Study of Residence Time Distribution in Co-Rotating Twin-Screw Extruders. Part II: Experimental Validation". Polymer Engineering and Science 43 12 (2003): 1849-1862. http://www.scopus.com/inward/record.url?eid=2-s2.0-1542605291&partnerID=MN8TOARS.
  85. Carneiro, O.S.; Nóbrega, J.M.; Oliveira, P.J.; Pinho, F.T.. "Flow balancing in extrusion dies for thermoplastic profiles. Part II: Influence of the design strategy". International Polymer Processing 18 3 (2003): 307-312. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141895083&partnerID=MN8TOARS.
  86. Nóbrega, J. M.; Carneiro, O. S.; Oliveira, P. J.; Pinho, F. T.. "Flow balancing in extrusion dies for thermoplastic profiles: Part I: Automatic design". (2003): http://hdl.handle.net/1822/58899.
    10.3139/217.1745
  87. Carneiro, O. S.; Nóbrega, J. M.; Oliveira, P. J.; Pinho, F. T.. "Flow balancing in extrusion dies for thermoplastic profiles Part II: Influence of the design strategy". (2003): http://hdl.handle.net/1822/58900.
    10.3139/217.1746
  88. Maia, J.M.; Carneiro, O.S.; Machado, A.V.; Covas, J.A.. "On-line rheometry for twin-screw extrusion (along the extruder) and its applications". Applied Rheology 12 1 (2002): 18-24. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036226501&partnerID=MN8TOARS.
  89. Carneiro, O.S.; Poulesquen, A.; Covas, J.A.; Vergnes, B.. "Visualisation and analysis of the flow along the kneading block of a twin-screw extruder". International Polymer Processing 17 4 (2002): 301-308. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037991097&partnerID=MN8TOARS.
  90. Covas, J.A.; Carneiro, O.S.; Maia, J.M.; Filipe, S.A.; Machado, A.V.. "Evolution of chemistry, morphology and rheology of various polymer systems along a twin-screw extruder". Canadian Journal of Chemical Engineering 80 6 (2002): 1065-1074. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037938610&partnerID=MN8TOARS.
  91. Carneiro, O. S.; Poulesquen, A.; Covas, J. A.; Vergnes, B.. "Visualisation and Analysis of the Flow along the Kneading Block of a Twin-screw Extruder". (2002): http://hdl.handle.net/1822/111.
    10.3139/217.1708
  92. Maia, J. M.; Carneiro, O. S.; Machado, A. V.; Covas, J. A.. "On-Line rheometry for twin-screw extrusion (along the extruder) and its applications". (2002): http://hdl.handle.net/1822/99.
  93. Covas, J. A.; Carneiro, O. S.; Maia, J. M.; Filipe, Susana A.; Machado, A. V.. "Evolution of chemistry, morphology and rheology of various polymer systems along a twin-screw extruder". (2002): http://hdl.handle.net/1822/112.
    10.1002/cjce.5450800608
  94. Carneiro, O.S.; Nóbrega, J.M.; Pinho, F.T.; Oliveira, P.J.. "Computer aided rheological design of extrusion dies for profiles". Journal of Materials Processing Technology 114 1 (2001): 75-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035806636&partnerID=MN8TOARS.
    10.1016/S0924-0136(01)00574-X
  95. Covas, J.A.; Carneiro, O.S.; Maia, J.M.. "Monitoring the evolution of morphology of polymer blends upon manufacturing of microfibrillar reinforced composites". International Journal of Polymeric Materials 50 3-4 (2001): 445-467. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038615074&partnerID=MN8TOARS.
  96. Canevarolo, S.V.; Mélo, T.J.A.; Covas, J.A.; Carneiro, O.S.. "Direct method for deconvoluting two residence time distribution curves". International Polymer Processing 16 4 (2001): 334-340. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035736753&partnerID=MN8TOARS.
  97. Carneiro, O.S.; Maia, J.M.. "Rheological behavior of (short) carbon fiber/thermoplastic composites. Part II: The influence of matrix type". Polymer Composites 21 6 (2000): 970-977. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034485612&partnerID=MN8TOARS.
    10.1002/pc.10250
  98. Carneiro, O.S.; Covas, J.A.; Vergnes, B.. "Experimental and theoretical study of twin-screw extrusion of polypropylene". Journal of Applied Polymer Science 78 7 (2000): 1419-1430. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034325584&partnerID=MN8TOARS.
    10.1002/1097-4628(20001114)78:7<1419::AID-APP130>3.0.CO;2-B
  99. Carneiro, O.S.; Maia, J.M.. "Rheological behavior of (short) carbon fiber/thermoplastic composites. Part I: The influence of fiber type, processing conditions and level of incorporation". Polymer Composites 21 6 (2000): 960-969. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034485595&partnerID=MN8TOARS.
    10.1002/pc.10249
  100. Nóbrega, J. M.; Pinho, Fernando; Oliveira, Paulo J.; Carneiro, O. S.. "Accounting for temperature-dependent properties in viscoelastic duct flows". (2000): http://hdl.handle.net/10400.6/601.
  101. Carneiro, O.S.; Caldeira, G.; Covas, J.A.. "Flow patterns in twin-screw extruders". Journal of Materials Processing Technology 92-93 (1999): 309-315. http://www.scopus.com/inward/record.url?eid=2-s2.0-0343603510&partnerID=MN8TOARS.
    10.1016/S0924-0136(99)00168-5
  102. Caldeira, G.; Maia, J.M.; Carneiro, O.S.; Covas, J.A.; Bernardo, C.A.. "Production and characterization of innovative carbon fiber-polycarbonate composites". Polymer Composites 19 2 (1998): 147-151. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032035530&partnerID=MN8TOARS.
  103. Carneiro, O.S.; Covas, J.A.; Bernardo, C.A.; Caldeira, G.; Van Hattum, F.W.J.; Ting, J.-M.; Alig, R.L.; Lake, M.L.. "Production and assessment of polycarbonate composites reinforced with vapour-grown carbon fibres". Composites Science and Technology 58 3-4 (1998): 401-407. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032030132&partnerID=MN8TOARS.
    10.1016/S0266-3538(97)00138-3
  104. Caldeira, G.; Maia, J. M.; Carneiro, O. S.; Covas, J. A.; Bernardo, C. A.. "Production and Characterization of Innovative Carbon Fiber-Polycarbonate Composites". (1998): http://hdl.handle.net/1822/248.
    10.1002/pc.10085
  105. Caldeira, G.; Maia, J.M.; Carneiro, O.S.; Covas, J.A.; Bernardo, C.A.. "Production and characterization of innovative carbon fibers-polycarbonate composites". Annual Technical Conference - ANTEC, Conference Proceedings 2 (1997): 2352-2356. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030655282&partnerID=MN8TOARS.
  106. Carneiro, O.S.; Covas, J.A.. "Design and assessment of mandrel pipe dies". Plastics, Rubber and Composites Processing and Applications 24 2 (1995): 79-87. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028993512&partnerID=MN8TOARS.
  107. Covas, J.A.; Carneiro, O.S.. "Elasticity of poly(vinyl chloride) melts". Polymer 33 23 (1992): 4977-4982. http://www.scopus.com/inward/record.url?eid=2-s2.0-0343367623&partnerID=MN8TOARS.
  108. Covas, J.A.; Carneiro, O.S.; Brito, A.M.. "Designing extrusion dies for thermoplastics". Journal of Elastomers and Plastics 23 3 (1991): 218-238. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026191247&partnerID=MN8TOARS.
  109. Covas, J.A.; Carneiro, O.S.. "Assessing the convergent flow analysis as a technique for characterizing the extensional flow of polymer melts". Polymer Testing 9 3 (1990): 181-194. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025250899&partnerID=MN8TOARS.
  110. Covas, J.A.; Carneiro, O.S.. "The potential of capillary rheometry for studying the extensional and elastic properties of polymer melts". Revista Portuguesa de Hemorreologia 4 SUPPL. 1 A (1990): 51-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025612715&partnerID=MN8TOARS.
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2021 - 2021 Desenvolvimento e controlo de produção de discos em PP e PET para termoformação
Supervisor
 Engenharia de Polímeros (Master)
Universidade do Minho, Portugal
2021 - 2021 Caracterização e correção de defeitos do processo de extrusão de folha
Supervisor
 Engenharia de Polímeros (Master)
Universidade do Minho, Portugal
2021 - 2021 HEFESTOS - desenvolvimento de laminas em polietileno tereftalato (PET) para produção de embalagens de enchimento a quente
Co-supervisor
 Engenharia de Polímeros (Master)
Universidade do Minho, Portugal
2020 - 2020 Caracterização termomecânica de polímeros com memoria de forma (SMP)
Co-supervisor
 Engenharia de Polímeros (Master)
Universidade do Minho, Portugal
2019 - 2019 impressão 3D de estruturas híbridas
Co-supervisor
 Engenharia de Polímeros (Master)
Universidade do Minho, Portugal
2017 - 2017 Effect of Exposure Conditions on UV-curable Coatings Films Performance
Co-supervisor
 Ciência e Engenharia de Polímeros e Compósitos (PhD)
Universidade do Minho, Portugal