???global.info.a_carregar???
Completed the Integrated Master in Chemical Engineering at Instituto Superior Técnico in 2008. The Master was concluded with a 6-month internship at the Institut Français du Pétrole (Lyon), with research work in the field of green diesel production from vegetable oils. Has more than 10 years of field experience in the industrial sector, specially in the area of cement production: laboratory management and quality control of alternative fuels supplied to cement plants; process engineering, cement grinding manager and production planning manager at SECIL-Outão cement factory. Collaborated, between 2019 and 2021, as Research Fellow, with the Center for Rapid and Sustainable Product Development (CDRSP, from the Polytechnic of Leiria), working in the fields of Chemical Engineering and Materials Engineering, with a special focus on additive manufacturing and 3D printing materials development. Currently pursuing a Ph.D. degree in Materials Engineering, with a research project focused on the development of extrusion-based 3D printing of Geopolymer Cement. The aim of the Ph.D. research project is to develop an environmentally friendly geopolymer cement mortar, incorporating inorganic waste streams or by-products from industry, with tailored properties, particularly in terms of its rheological and mechanical performance.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
TOMÁS MARIA SIQUEIRA DE ALMEIDA ARCHER DE CARVALHO

Nomes de citação

  • Archer de Carvalho, Tomás

Identificadores de autor

Ciência ID
FF1B-82F7-9459
ORCID iD
0000-0002-9411-5823

Endereços de correio eletrónico

  • tomas.carvalho@ipleiria.pt (Profissional)
  • tomas.a.carvalho@tecnico.ulisboa.pt (Profissional)

Telefones

Telefone
  • 244569441 (Profissional)

Moradas

  • Edifício IPLeiria, Rua de Portugal – Zona Industrial, 2430-028, Marinha Grande, Marinha Grande, Portugal (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Engenharia dos Materiais

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador independente (B2) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Francês Utilizador independente (B1) Utilizador independente (B2) Utilizador independente (B1) Utilizador independente (B2)
Espanhol; Castelhano Utilizador elementar (A1) Utilizador elementar (A2) Utilizador elementar (A1) Utilizador elementar (A2)
Formação
Grau Classificação
2021/05/02 - 2025/03/31
Em curso
 Diploma de Estudos Avançados em Engenharia de Materiais (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2002/09 - 2008/09/17
Concluído
 Integrated Master in Chemical Engineering (Mestrado integrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Development of a catalytic test used for the optimization of sulphided catalysts in the hydrodeoxygenation process of model molecules" (TESE/DISSERTAÇÃO)
 17
Percurso profissional

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2018/07 - 2019/02 Area Manager - Cement Plant Production Planning SECIL, Companhia Geral de Cal e Cimento, SA, Portugal
Fábrica de Cimento SECIL-Outão, Portugal
2016/07 - 2018/06 Area Manager - Cement Grinding SECIL, Companhia Geral de Cal e Cimento, SA, Portugal
SECIL-Outão Cement Plant, Portugal
2015/03 - 2016/06 Process Engineer SECIL, Companhia Geral de Cal e Cimento, SA, Portugal
SECIL-Outão Cement Plant, Portugal
2011/11 - 2015/02 Chemical Engineer AVE, Gestão Ambiental e Valorização Energética, SA, Portugal
2010/11 - 2011/10 Trainee - Chemical Engineer SECIL, Companhia Geral de Cal e Cimento, SA, Portugal
2008/03 - 2008/09 Internship / Master Thesis IFP Energies nouvelles Solaize, França
IFP Energies nouvelles Solaize, França
Projetos

Bolsa

Designação Financiadores
2021/03/01 - Atual Advanced geopolymer cement formulations for extrusion-based 3D printing in construction
2020.04531.BD
Bolseiro de Doutoramento
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia
Em curso

Projeto

Designação Financiadores
2020/07/15 - 2021/02/28 WOODSHAPE4.0 - Intelligent injection moulding on wood veneers aided by cyber-physics systems
POCI-01-0247-FEDER-033348
Bolseiro de Investigação
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 European Regional Development Fund
Concluído
2019/03/04 - 2020/07/03 ADD VITRUM - direct digital manufacturing of glass products
POCI-01-0247-FEDER-034068
Bolseiro de Investigação
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 European Regional Development Fund
Concluído
Produções

Publicações

Artigo em conferência
  1. Archer de Carvalho, Tomás; Gaspar, Florindo; Marques, Ana C.; Artur J S Mateus. "Desenvolvimento de cimento geopolimérico de cinza volante de biomassa para impressão 3D na construção". Trabalho apresentado em 5º Congresso Luso-Brasileiro de Materiais de Construção Sustentáveis | Construção 2024, Lisboa, 2024.
    Submetido
Artigo em revista
  1. Archer de Carvalho, Tomás; Gaspar, Florindo; Marques, Ana C.; Mateus, Artur. Autor correspondente: Archer de Carvalho, Tomás. "Optimization of formulation ratios of geopolymer mortar based on metakaolin and biomass fly ash". Construction and Building Materials 412 (2024): 134846. http://dx.doi.org/10.1016/j.conbuildmat.2023.134846.
    Acesso aberto • Publicado • 10.1016/j.conbuildmat.2023.134846
  2. Encarnação, Telma; Nicolau, Nadia; Ramos, Pedro; Silvestre, Elsa; Mateus, Artur; Archer de Carvalho, Tomás; Gaspar, Florindo; et al. "Recycling Ophthalmic Lens Wastewater in a Circular Economy Context: A Case Study with Microalgae Integration". Materials 17 1 (2023): 75. http://dx.doi.org/10.3390/ma17010075.
    Publicado • 10.3390/ma17010075
  3. Archer de Carvalho, Tomás; B815-2FE8-CFBB; 7A18-C1D6-67A4; 0E1A-9A57-E79A. "Evaluation of the Potential of Metakaolin, Electric Arc Furnace Slag, and Biomass Fly Ash for Geopolymer Cement Compositions". Materials 16 7 (2023): 2741. http://dx.doi.org/10.3390/ma16072741.
    Publicado • 10.3390/ma16072741
Capítulo de livro
  1. Archer de Carvalho, Tomás; Gaspar, Florindo; Mateus, Artur; Marques, Ana. Autor correspondente: Archer de Carvalho, Tomás. "Geopolymer Cement for Sustainable Construction: A Review". In Sustainable and Digital Building, 149-166. Springer International Publishing, 2023.
    Publicado • 10.1007/978-3-031-25795-7_11
  2. Joshi, Arpan; Archer de Carvalho, Tomás; Gaspar, Florindo. "Incorporation of Forest Biomass-Based Fly Ash in Cement for 3D Printing". In Sustainable and Digital Building, 73-87. Springer International Publishing, 2023.
    Publicado • 10.1007/978-3-031-25795-7_6
  3. Archer de Carvalho, Tomás; Gaspar, Florindo; Mateus, Artur; Monteiro, Sandra; Campos, Joana. "Evaluation of the Gluing Process of Maritime Pine Wood Veneers for Application in Overmolding". In Sustainability and Automation in Smart Constructions, 285-293. Springer International Publishing, 2020.
    Publicado • 10.1007/978-3-030-35533-3_34
Resumo em conferência
  1. Encarnação, Telma; Mateus, Artur; Gaspar, Florindo; Massano, Anabela; Biscaia, Sara; Guincho, Pedro Batalha; Nogueira, Bernardo A.; et al. "Bioremediation Using Microalgae and Circular Economy Approach: A Case Study". Trabalho apresentado em MATERIAIS 2022, 2022.
    Publicado • 10.3390/materproc2022008108
  2. Archer de Carvalho, Tomás; Gaspar, Florindo; Marques, Ana C.; Mateus, Artur. "Evaluation of the Potential of Metakaolin, Electric Arc Furnace Slag, and Biomass Fly Ash for Geopolymer Cement Compositions". Trabalho apresentado em MATERIAIS 2022, 2022.
    Publicado • 10.3390/materproc2022008061
  3. Archer de Carvalho, Tomás; Gaspar, Florindo; Mateus, Artur; Marques, Ana C.. "3D printing with geopolymer cement: a review on material properties and system requirements". Trabalho apresentado em International Conference on Quality Innovation and Sustainability, Leiria, 2021.
    Publicado
  4. Archer de Carvalho, Tomás; Gaspar, Florindo; Mateus, Artur. "Formulating geopolymers: a review on the reintegration of inorganic waste streams". Trabalho apresentado em International Conference on Advanced Research on Sustainable Intelligent Manufacturing (RESIM2020), 2020.
    Publicado
Tese / Dissertação
  1. Archer de Carvalho, Tomás. "Catalytic test development on model molecules for hydrodeoxygenation reactions on sulphided catalysts". Mestrado, 2008.

Propriedade Intelectual

Patente
  1. Silva, Alana; Gaspar, Florindo; Archer de Carvalho, Tomás; Peixinho, Ana do Bem d'eça. 2023. "Geopolymer compositions comprising aluminum sludge and use thereof". Portugal.
    Pendente
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2022/10 Geopolymer cement for sustainable construction: a review Sustainable and Digital Building 2022
(Portugal)
2022/06/03 Evaluation of Metakaolin as Model Raw Material for Geopolymer Cement International Conference on Advanced Research in Sustainable Intelligent Manufacturing (RESIM 2022)
(Portugal)
2022/04 Evaluation of the potential of metakaolin, electric arc furnace slag, and biomass fly ash for geopolymer cement compositions MATERIAIS 2022
(Portugal)
2020/06/05 Formulating geopolymers: a review on the reintegration of inorganic waste streams International Conference on Advanced Research in Sustainable Intelligent Manufacturing (RESIM 2020)
Center for Rapid and Sustainable Product Development, Polytechnic of Leiria (Portugal)
2019/11/08 Evaluation of the gluing process of maritime pine wood veneers for application in overmolding International Conference on Automation Innovation in Construction (CIAC-2019)
Polytechnic of Leiria (Leiria, Portugal)

Participação em evento

Descrição da atividade
Tipo de evento 		Nome do evento
Instituição / Organização
2018/06/06 - 2018/06/06 The “Mapei Cement Academy 2018”, was held at the Mapei headquarters in Milan and involved three full days of technical discussions between Mapei specialists and Cement Works Directors, Quality Managers and Process Engineers from leading cement manufacturers. The three days of the “Mapei Cement Academy 2018” were split into a number of different technical sessions, with each session focusing on a key theme related to the production of cement, covering both its chemical aspects and manufacturing process issues.
Seminário
 Mapei Cement Academy 2018
Mapei SpA, Itália