???global.info.a_carregar???
Ana Maria Segadães. Obteve o Título de Agregado em 1998/05/08 pela Universidade de Aveiro, Doctor of Philosophy (PhD) em 1982/03 pela University of Sheffield, UK, equivalência ao Doutoramento em Ciência e Engenharia de Materiais em 1983 pela Universidade de Aveiro, Licenciatura em Engenharia Química em 1976/09 pela Universidade de Coimbra, Faculdade de Ciencias e Tecnologia. É Professor Associado na Universidade de Aveiro. Publicou 104 artigos em revistas especializadas. Recebeu 6 prémio(s) e/ou homenagens. Atua nas áreas de Ciências da Engenharia e Tecnologias com ênfase em Engenharia dos Materiais com ênfase em Cerâmica. Nas suas atividades profissionais interagiu com 169 colaboradores em coautorias de trabalhos científicos. No seu currículo Ciência Vitae os termos mais frequentes na contextualização da produção científica, tecnológica e artístico-cultural são: Argila; Cerâmica; Plasticidade; Clay; Plasticity; Fosfatos; Óxido de magnésio; Cimento; Propriedades mecânicas; Mechanical properties; processamento cerâmico; reologia; silicatos; terras raras; ceramic processing; rare earth; rheology; silicate; Química de superfície; síntese por reação de combustação; SOFC; Engenharia de materiais; Vidro cerâmico; Cozedura (Cerâmica); Vidrado; Porcelana; Curva de cozedura; Fundição; Moldes; Areia de fundição; Óxido de alumínio; ítria; processamento coloidal; colloidal processing; Yttria; ativação ácida; colapso estrutural; imobilização; rejeito nuclear; acid activation; immobilization; nuclear waste; Materiais refractários; reutilização; escoabilidade; fundição; Aproveitamento de resíduos; Agregados (Materiais de construção); Cerâmica industrial; Cimentos; Expansão por humidade; Materiais de construção; Betão refractário sem cimento; Betão auto-escoante; Revestimentos monolíticos; Alumina.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Ana Maria Segadães

Nomes de citação

  • Segadães, Ana M

Identificadores de autor

Ciência ID
F21F-31FB-D0F3
ORCID iD
0000-0001-6465-620X
Researcher Id
E-4499-2013
Scopus Author Id
56429804700

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Cerâmica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Francês Utilizador elementar (A2) Utilizador independente (B1) Utilizador elementar (A2) Utilizador independente (B1) Utilizador elementar (A2)
Formação
Grau Classificação
1998/05/08
Concluído
 n/a (Título de Agregado)
Universidade de Aveiro, Portugal
"Estudo do processo de Corrosão Química de Refractários Comerciais utilizando Diagramas de Fases" (TESE/DISSERTAÇÃO)
 Aprovado
1983
Concluído
 Ciência e Engenharia de Materiais (Doutoramento)
Especialização em Refractários
Universidade de Aveiro, Portugal
"The Solubility Imits of Mixed Spinel Phases and Their Bea- Ring on the Phase Relationships in the Syste Mgo - A12 O3 - Cr2 O3 - Fe2 O3 - Cao. Sio2" (TESE/DISSERTAÇÃO)
 Equivalência
1979/09 - 1982/03
Concluído
 PhD (Doctor of Philosophy)
Especialização em Materials
The University of Sheffield, Reino Unido
"The Solubility Limits of Mixed Spinel Phases and Their Bearing on the Phase Relationships in the System MgO - A12 O3 - Cr2 O3 - Fe2 O3 - CaO. SiO2" (TESE/DISSERTAÇÃO)
 Aprovado
1976/09
Concluído
 Engenharia Química (Licenciatura)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
 16
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
1998/05/09 - Atual Professor Associado (Docente Universitário) Universidade de Aveiro, Portugal
2015 - 2018 Professor Associado (Docente Universitário) Universidade de Aveiro CICECO, Portugal
2007 - 2013 Professor Associado (Docente Universitário) Universidade de Aveiro CICECO, Portugal
1991/09/30 - 1998/05/08 Professor Associado (Docente Universitário) Universidade de Aveiro, Portugal
1983/03/02 - 1991/09/29 Professor Auxiliar (Docente Universitário) Universidade de Aveiro, Portugal
1978/10/04 - 1983/03/01 Assistente (Docente Universitário) Universidade de Aveiro, Portugal
1977/06/13 - 1978/10/03 Assistente Estagiário (Docente Universitário) Universidade de Aveiro, Portugal
1976/10/04 - 1977/06/12 Assistente Estagiário (Docente Universitário) Universidade de Coimbra, Portugal

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2016 - 2018 colaborador Centro de Ciências e Tecnologias da Engenharia Mecânica e Aeroespacial, Portugal
2007 - 2015 colaborador Centro de Ciências e Tecnologias da Engenharia Mecânica e Aeroespacial, Portugal
2007 - 2013 colaborador Centro de Ciências e Tecnologias da Engenharia Mecânica e Aeroespacial, Portugal
Produções

Publicações

Artigo em conferência
  1. Santos, I.B.; Acchar, W.; Goncalves, J.N.; Segadães, A.M.. "Bactericidal Potential of Titania and Silver Nano Powders Deposited in Porous Ceramic Substrates for Low-power Water Purification Reactors". 2015.
    10.1016/j.matpr.2015.04.030
  2. Acchar, W.; Silva, J.E.; Castanho, S.R.H.M.; Segadães, A.M.. "Properties of clay-based ceramics added with construction and demolition waste". 2009.
  3. Silva, A.P.; Devezas, T.C.; Segadães, A.M.. "Effect of fine matrix content and coarse aggregate particle size on the final properties of self-flow no-cement refractory castables". 2007.
  4. Raupp-Pereira, F.; Hotza, D.; Segadães, A.M.; Labrincha, J.A.. "Cement formulations made of different wastes and natural sub-probucts". 2005.
  5. Raupp-Pereira, F.; Silva, L.; Hotza, D.; Segadães, A.M.; Labrincha, J.A.. "Refractory mortars based on industrial wastes". 2005.
  6. Segadães, A.M.; Kniess, C.; Acchar, W.; Kuhnen, N.C.; Hotza, D.. "Pre-laboratory assessment of the reuse-potential of industrial wastes in clay-based products". 2005.
  7. Correia, S.L.; Gomes, C.M.; Hotza, D.; Segadães, A.M.. "A non-linear programming approach for formulation of three-component ceramics as a function of physical and mechanical properties". 2005.
  8. Fumo, D. A.. "Effect of silica fume additions on the hydration behaviour of calcium aluminates". Trabalho apresentado em UNITECR'97 - 5th Biennial Worldwide Congress on Refractories, New Orleans, Louisiana, 1997.
    Publicado
  9. Golden, S. J.. "PROCESSING AND CHARACTERIZATION OF SINGLE-PHASE SUPERCONDUCTING THIN-FILMS IN THE BI-SR-CA-CU-O SYSTEM FROM CHEMICAL PRECURSORS". Trabalho apresentado em MRS Fall Meeting 1989, Boston, MS, 1989.
    Publicado
  10. Canha, R.H.; Segadaes, A.M.. "COMPATIBILITY RELATIONSHIPS IN THE SYSTEM CaO. SiO2-Fe2O3-FeO.". 1986.
    10.1051/jphyscol:1986169
Artigo em revista
  1. Camargo, W.F.; Mantas, P.Q.; Segadães, A.M.; Cruz, R.C.D.. "Powder grinding and nano-particle sizing: Sound, light and enlightenment". Powder Technology 383 (2021): 348-355. http://dx.doi.org/10.1016/j.powtec.2021.01.059.
    10.1016/j.powtec.2021.01.059
  2. Salomão, Rafael; Kawamura, Mirian A.; Emilio, Ana B.V.; Sakihama, José; Segadães, Ana M.. "Calcium aluminate cement in castable alumina: From hydrate bonding to the in situ formation of calcium hexaluminate". Ceramics International (2021): http://dx.doi.org/10.1016/j.ceramint.2021.02.066.
    10.1016/j.ceramint.2021.02.066
  3. Wanna C. Fontes; José M. Franco de Carvalho; Keoma Defaveri; Guilherme J. Brigolini; Ana M. Segadães; Ricardo A. F. Peixoto. "Hydraulic Tiles Produced with Fine Aggregates and Pigments Reclaimed from Iron Ore Tailings". Journal of Sustainable Metallurgy (2021): https://doi.org/10.1007/s40831-020-00329-9.
    10.1007/s40831-020-00329-9
  4. Luiza F. Lima; Pedro Q. Mantas; Ana M. Segadães; Robinson C.D. Cruz. "Processing and characterization of sinter-crystallized basalt glass-ceramics". Journal of Non-Crystalline Solids 538 (2020): 120019-120019. https://doi.org/10.1016/j.jnoncrysol.2020.120019.
    10.1016/j.jnoncrysol.2020.120019
  5. Cruz, R.C.D.; Segadães, A.M.; Mantas, P.Q.; Oberacker, R.; Hoffmann, M.J.. "Interpreting rheology and electrical conductivity: It all boils down to which particle size". Journal of Colloid and Interface Science 574 (2020): 97-109. http://www.scopus.com/inward/record.url?eid=2-s2.0-85083308746&partnerID=MN8TOARS.
    10.1016/j.jcis.2020.04.046
  6. Fontes, W.C.; Franco de Carvalho, J.M.; Andrade, L.C.R.; Segadães, A.M.; Peixoto, R.A.F.. "Assessment of the use potential of iron ore tailings in the manufacture of ceramic tiles: From tailings-dams to “brown porcelain”". Construction and Building Materials 206 (2019): 111-121. http://www.scopus.com/inward/record.url?eid=2-s2.0-85061571757&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2019.02.052
  7. Segadães, Ana. "Characterisation of refractory ceramic pressed body containing industrial waste". Materials Science Forum 912 MSF (2018): 71-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042493591&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.912.71
  8. Schiavo, L.S.A.; Mantas, P.Q.; Segadães, A.M.; Cruz, R.C.D.. "From dry pressing to plastic forming of ceramics: Assessing the workability window". Construction and Building Materials 189 (2018): 594-600. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053327294&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.09.015
  9. Santana, L.N.L.; Gomes, J.; Menezes, R.R.; Neves, G.A.; Lira, H.L.; Segadães, A.M.. "Microstructure development in clays upon heat treatment: Kinetics and equilibrium". Applied Clay Science 135 (2017): 325-332. http://www.scopus.com/inward/record.url?eid=2-s2.0-85002131199&partnerID=MN8TOARS.
    10.1016/j.clay.2016.10.014
  10. Silva, A.P.; Segadães, A.M.; Lopes, R.A.. "Castable systems designed with powders reclaimed from dismantled steel induction furnace refractory linings". Ceramics International 43 6 (2017): 5020-5031. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009511243&partnerID=MN8TOARS.
    10.1016/j.ceramint.2017.01.012
  11. Cruz, R.C.D.; Segadães, A.M.; Oberacker, R.; Hoffmann, M.J.. "Double layer electrical conductivity as a stability criterion for concentrated colloidal suspensions". Colloids and Surfaces A: Physicochemical and Engineering Aspects 520 (2017): 9-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010284882&partnerID=MN8TOARS.
    10.1016/j.colsurfa.2017.01.059
  12. Dias, F.G.; Segadães, A.M.; Perottoni, C.A.; Cruz, R.C.D.. "Assessment of the fluxing potential of igneous rocks in the traditional ceramics industry". Ceramics International 43 18 (2017): 16149-16158. http://www.scopus.com/inward/record.url?eid=2-s2.0-85028635740&partnerID=MN8TOARS.
    10.1016/j.ceramint.2017.08.190
  13. Segadães, A.; Marques, F.. "Editorial". Ceramica 63 366 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85019840783&partnerID=MN8TOARS.
    10.1590/0366-69132017633660000
  14. Sivaldo Leite Correia; Denilso Palaoro; Ana Maria Segadães. "Property Optimisation of EPDM Rubber Composites Using Mathematical and Statistical Strategies". Advances in Materials Science and Engineering 2017 (2017): 1-7. https://doi.org/10.1155/2017/2730830.
    10.1155/2017/2730830
  15. Zorzi, J.E.; Segadães, A.M.; Perottoni, C.A.. "Reference material for temperature calibration of differential scanning calorimeters above 1400 °C". Journal of Thermal Analysis and Calorimetry (2016): 1-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007485703&partnerID=MN8TOARS.
    10.1007/s10973-016-6048-8
  16. Acchar, W.; Avelino, K.A.; Segadães, A.M.. "Granite waste and coffee husk ash synergistic effect on clay-based ceramics". Advances in Applied Ceramics 115 4 (2016): 236-242. http://www.scopus.com/inward/record.url?eid=2-s2.0-84970023132&partnerID=MN8TOARS.
    10.1080/236-17436753.2015.1126989
  17. Schackow, A.; Stringari, D.; Senff, L.; Correia, S.L.; Segadães, A.M.. "Influence of fired clay brick waste additions on the durability of mortars". Cement and Concrete Composites 62 (2015): 82-89. http://www.scopus.com/inward/record.url?eid=2-s2.0-84934951145&partnerID=MN8TOARS.
    10.1016/j.cemconcomp.2015.04.019
  18. Echeverrigaray, S.G.; Emiliano, J.V.; Segadães, A.M.; Cruz, R.C.D.. "Low-valued raw materials challenge the common eligibility criteria for triaxial ceramics". Ceramics International (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84979464835&partnerID=MN8TOARS.
    10.1016/j.ceramint.2016.03.178
  19. Coronado, M.; Segadães, A.M.; Andrés, A.. "Using mixture design of experiments to assess the environmental impact of clay-based structural ceramics containing foundry wastes". Journal of Hazardous Materials 299 (2015): 529-539. http://www.scopus.com/inward/record.url?eid=2-s2.0-84939140660&partnerID=MN8TOARS.
    10.1016/j.jhazmat.2015.07.010
  20. Acchar, Wilson; Silva, Jaquelígia B.; Silva, Vamberto M.; Góis, Luciano Costa; Segadães, Ana M.; Wilson Acchar; Jaquelígia B. Silva; et al. "Incorporation of Fired Ceramic Waste into Binary and Ternary Earth-Binder (S) Mixtures for Compressed Blocks". Materials Science Forum 798-799 (2014): 498-502. http://dx.doi.org/10.4028/www.scientific.net/msf.798-799.498.
    Publicado • 10.4028/www.scientific.net/msf.798-799.498
  21. Coronado, M.; Segadães, A.M.; Andrés, A.. "Combining mixture design of experiments with phase diagrams in the evaluation of structural ceramics containing foundry by-products". Applied Clay Science 101 (2014): 390-400. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908164874&partnerID=MN8TOARS.
    10.1016/j.clay.2014.05.021
  22. Santana, L.N.L.; Gomes, J.; Neves, G.A.; Lira, H.L.; Menezes, R.R.; Segadães, A.M.. "Mullite formation from bentonites containing kaolinite: Effect of composition and synthesis parameters". Applied Clay Science 87 (2014): 28-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890131813&partnerID=MN8TOARS.
    10.1016/j.clay.2013.11.018
  23. Acchar, W.; Silva, J.E.; Segadães, A.M.. "Increased added value reuse of construction waste in clay based building ceramics". Advances in Applied Ceramics 112 8 (2013): 487-493. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888420882&partnerID=MN8TOARS.
    10.1179/1743676113Y.0000000118
  24. Acchar, W.; Dultra, E.J.V.; Segadães, A.M.. "Untreated coffee husk ashes used as flux in ceramic tiles". Applied Clay Science 75-76 (2013): 141-147. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876702957&partnerID=MN8TOARS.
    10.1016/j.clay.2013.03.009
  25. Junkes, J.A.; Carvalho, M.A.; Segadães, A.M.; Hotza, D.. "Ceramic tile formulations from industrial waste | Rezepturen für Keramikfliesen aus Industrieabfällen". Keramische Zeitschrift 65 6 (2013): 365-371. http://www.scopus.com/inward/record.url?eid=2-s2.0-84951959734&partnerID=MN8TOARS.
  26. Durães, L.; Matias, T.; Segadães, A.M.; Campos, J.; Portugal, A.. "MgAl 2O 4 spinel synthesis by combustion and detonation reactions: A thermochemical evaluation". Journal of the European Ceramic Society 32 12 (2012): 3161-3170. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862491562&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2012.04.031
  27. Pinto, D.G.; Silva, A.P.; Segadães, A.M.; Devezas, T.C.. "Thermomechanical evaluation of self-flowing refractory castables with and without the addition of aluminate cement". Ceramics International 38 4 (2012): 3483-3488. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858078458&partnerID=MN8TOARS.
    10.1016/j.ceramint.2011.12.062
  28. Correia, S.L.; Palaoro, D.; Mautone, A.; Segadães, A.M.. "Influence of carbon black, calcium carbonate and dioctyl phthalate compositions on the NBR vulcanized rubber properties through experiments design". Macromolecular Symposia 319 1 (2012): 161-166. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867828135&partnerID=MN8TOARS.
    10.1002/masy.201100166
  29. Silva, A.P.; Segadães, A.M.; Pinto, D.G.; Oliveira, L.A.; Devezas, T.C.. "Effect of particle size distribution and calcium aluminate cement on the rheological behaviour of all-alumina refractory castables". Powder Technology 226 (2012): 107-113. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861898304&partnerID=MN8TOARS.
    10.1016/j.powtec.2012.04.028
  30. Junkes, J.A.; Prates, P.B.; Hotza, D.; Segadães, A.M.. "Combining mineral and clay-based wastes to produce porcelain-like ceramics: An exploratory study". Applied Clay Science 69 (2012): 50-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867409501&partnerID=MN8TOARS.
    10.1016/j.clay.2012.08.009
  31. Mello-Castanho, S.R.H.; Ferreira, M.C.; Acchar, W.; Segadães, A.M.. "Assessment of reuse potential of high alumina industrial waste as devitrification aid in common alumina-lime-silica glasses". Advances in Applied Ceramics 110 7 (2011): 426-432. http://www.scopus.com/inward/record.url?eid=2-s2.0-80455127134&partnerID=MN8TOARS.
    10.1179/1743676111Y.0000000026
  32. Junkes, J.A.; Carvalho, M.A.; Segadães, A.M.; Hotza, D.. "Ceramic tile formulations from industrial waste". InterCeram: International Ceramic Review 60 1 (2011): 36-41. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856164929&partnerID=MN8TOARS.
  33. Correia, S.L.; Partala, T.; Loch, F.C.; Segadães, A.M.. "Factorial design used to model the compressive strength of mortars containing recycled rubber". Composite Structures 92 9 (2010): 2047-2051. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950858193&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.11.007
  34. Pinto, D.G.; Silva, A.P.; Segadães, A.M.; Devezas, T.C.. "Influence of surface area on the flowability behaviour of self-flow refractory castables". Materials Science Forum 636-637 (2010): 124-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649130391&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.124
  35. Silva, A.P.; Pinto, D.G.; Segadães, A.M.; Devezas, T.C.. "Designing particle sizing and packing for flowability and sintered mechanical strength". Journal of the European Ceramic Society 30 14 (2010): 2955-2962. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955269311&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2009.12.017
  36. Acchar, W.; Segadães, A.M.. "Mechanical properties of a lithium glass-ceramic matrix (LZSA) reinforced with TiC or (W,Ti)C particles: A preliminary study". Composite Structures 92 3 (2010): 707-711. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350707593&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.09.019
  37. Correia, S.L.; Dienstmann, G.; Folgueras, M.V.; Segadaes, A.M.. "Effect of quartz sand replacement by agate rejects in triaxial porcelain". Journal of Hazardous Materials 163 1 (2009): 315-322. http://www.scopus.com/inward/record.url?eid=2-s2.0-58249128584&partnerID=MN8TOARS.
    10.1016/j.jhazmat.2008.06.094
  38. Acchar, W.; Segadães, A.M.. "Properties of sintered alumina reinforced with niobium carbide". International Journal of Refractory Metals and Hard Materials 27 2 (2009): 427-430. http://www.scopus.com/inward/record.url?eid=2-s2.0-59649129785&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2008.05.004
  39. Acchar, W.; Rulff, B.M.; Segadães, A.M.. "Effect of the incorporation of a spent catalyst reject from the petroleum industry in clay products". Applied Clay Science 42 3-4 (2009): 657-660. http://www.scopus.com/inward/record.url?eid=2-s2.0-56549095768&partnerID=MN8TOARS.
    10.1016/j.clay.2008.06.007
  40. Correia, S.L.; Souza, F.L.; Dienstmann, G.; Segadães, A.M.. "Assessment of the recycling potential of fresh concrete waste using a factorial design of experiments". Waste Management 29 11 (2009): 2886-2891. http://www.scopus.com/inward/record.url?eid=2-s2.0-69949121281&partnerID=MN8TOARS.
    10.1016/j.wasman.2009.06.014
  41. Correia, S.L.; Hotza, D.; Segadães, A.M.. "Predicting porosity content in triaxial porcelain bodies as a function of raw materials contents". Journal of Materials Science 43 2 (2008): 696-701. http://www.scopus.com/inward/record.url?eid=2-s2.0-37449013561&partnerID=MN8TOARS.
    10.1007/s10853-007-2188-3
  42. Raupp-Pereira, F.; Segadães, A.M.; Silva, A.S.; Rocha, J.; Labrincha, J.A.. "27Al and 29Si NMR and XRD characterisation of clinkers: Standard phases and new waste based formulations". Advances in Applied Ceramics 107 1 (2008): 37-45. http://www.scopus.com/inward/record.url?eid=2-s2.0-39049105781&partnerID=MN8TOARS.
    10.1179/174367607X227954
  43. Raupp-Pereira, F.; Ribeiro, M.J.; Segadães, A.M.; Labrincha, J.A.. "Extrusion and property characterisation of waste-based ceramic formulations". Journal of the European Ceramic Society 27 5 (2007): 2333-2340. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845595245&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2006.07.015
  44. Raupp-Pereira, F.; Silva, L.; Segadães, A.M.; Hotza, D.; Labrincha, J.A.. "Potable water filtration sludge: Use as set retarder in one-coat plastering mortars". Construction and Building Materials 21 3 (2007): 646-653. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845288659&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2005.12.005
  45. Raupp-Pereira, F.; Silva, L.; Segadães, A.M.; Paiva, H.; Labrincha, J.A.. "Effects of potable water filtration sludge on the rheological behaviour of one-coat plastering mortars". Journal of Materials Processing Technology 190 1-3 (2007): 12-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-34248136897&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2007.03.120
  46. Raupp-Pereira, F.; Ribeiro, M.J.; Segadães, A.M.; Labrincha, J.A.. "Setting behaviour of waste-based cements estimated by impedance spectroscopy and temperature measurements". Boletin de la Sociedad Espanola de Ceramica y Vidrio 46 2 (2007): 91-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-34248212622&partnerID=MN8TOARS.
  47. Abílio P. Silva; Ana M. Segadães; Tessaleno C. Devezas. "Design of the Particle Size Composition of an Alumina Powder Matrix for Maximum Flowability and Minimum Water Content". Materials Science Forum 530-531 (2006): 425-430. https://doi.org/10.4028/www.scientific.net/MSF.530-531.425.
    10.4028/www.scientific.net/MSF.530-531.425
  48. Wilson Acchar; G.C.L. Silveira; Sonia Regina Homem de Mello-Castanho; Ana M. Segadães. "Improving the Properties of Low Temperature Sintered Alumina Bodies with Granite Reject Additions". Advances in Science and Technology 45 (2006): 2212-2217. https://doi.org/10.4028/www.scientific.net/AST.45.2212.
    10.4028/www.scientific.net/AST.45.2212
  49. Sonia Regina Homem de Mello-Castanho; Antônio Carlos da Silva; Wilson Acchar; Ana M. Segadães. "Corrosion Behaviour of Vitrified Heavy Metals from Industrial Waste". Advances in Science and Technology 45 (2006): 178-183. https://doi.org/10.4028/www.scientific.net/AST.45.178.
    10.4028/www.scientific.net/AST.45.178
  50. Abílio P. Silva; Ana M. Segadães; Tessaleno C. Devezas. "Particle Distribution Design in a Self-Flow Alumina Refractory Castable without Cement". Advances in Science and Technology 45 (2006): 2260-2265. https://doi.org/10.4028/www.scientific.net/AST.45.2260.
    10.4028/www.scientific.net/AST.45.2260
  51. F. Raupp-Pereira; M.J. Ribeiro; Ana M. Segadães; Joao A. Labrincha. "Properties of Wastes-Based Extruded Ceramics Formulations". Advances in Science and Technology 45 (2006): 2218-2223. https://doi.org/10.4028/www.scientific.net/AST.45.2218.
    10.4028/www.scientific.net/AST.45.2218
  52. Raupp-Pereira, F.; Hotza, D.; Segadães, A.M.; Labrincha, J.A.. "Ceramic formulations prepared with industrial wastes and natural sub-products". Ceramics International 32 2 (2006): 173-179. http://www.scopus.com/inward/record.url?eid=2-s2.0-28944451345&partnerID=MN8TOARS.
    10.1016/j.ceramint.2005.01.014
  53. Correia, S.L.; Oliveira, A.P.N.; Hotza, D.; Segadães, A.M.. "Properties of triaxial porcelain bodies: Interpretation of statistical modeling". Journal of the American Ceramic Society 89 11 (2006): 3356-3365. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750252644&partnerID=MN8TOARS.
    10.1111/j.1551-2916.2006.01245.x
  54. Segadaes, A.M.. "Use of phase diagrams to guide ceramic production from wastes". Advances in Applied Ceramics 105 1 (2006): 46-54. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746406423&partnerID=MN8TOARS.
    10.1179/174329006X82927
  55. Acchar, W.; Vieira, F.A.; Segadães, A.M.. "Using ornamental stone cutting rejects as raw materials for red clay ceramic products: Properties and microstructure development". Materials Science and Engineering A 435-436 (2006): 606-610. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748902415&partnerID=MN8TOARS.
    10.1016/j.msea.2006.07.091
  56. J.B. Silva; F.A. Vieira; Wilson Acchar; Dachamir Hotza; Ana M. Segadães; Silva, J.B.; Vieira, F.A.; et al. "Sintering of a Clay Material with Granite and Marble Reject". Materials Science Forum 498-499 (2005): 558-563. https://doi.org/10.4028/www.scientific.net/MSF.498-499.558.
    Publicado • 10.4028/www.scientific.net/MSF.498-499.558
  57. Sivaldo Leite Correia; K.A.S. Curto; Dachamir Hotza; Ana M. Segadães; Correia, S.L.; Curto, K.A.S.; Hotza, D.; Segadães, A.M.. "Clays from Southern Brazil: Physical, Chemical and Mineralogical Characterization". Materials Science Forum 498-499 (2005): 447-452. https://doi.org/10.4028/www.scientific.net/MSF.498-499.447.
    Publicado • 10.4028/www.scientific.net/MSF.498-499.447
  58. Acchar, W.; Ramalho, E.G.; Fonseca, Y.A.; Hotza, D.; Segadães, A.M.. "Using granite rejects to aid densification and improve mechanical properties of alumina bodies". Journal of Materials Science 40 15 (2005): 3905-3909. http://www.scopus.com/inward/record.url?eid=2-s2.0-24344453910&partnerID=MN8TOARS.
    10.1007/s10853-005-0778-5
  59. Cruz, R.C.D.; Reinshagen, J.; Oberacker, R.; Segadães, A.M.; Hoffmann, M.J.. "Electrical conductivity and stability of concentrated aqueous alumina suspensions". Journal of Colloid and Interface Science 286 2 (2005): 579-588. http://www.scopus.com/inward/record.url?eid=2-s2.0-19444366759&partnerID=MN8TOARS.
    10.1016/j.jcis.2005.02.025
  60. Acchar, W.; Cairo, C.A.; Segadães, A.M.. "Effect of tungsten carbide additions on the microstructure and properties of hot-pressed alumina". Materials Science and Engineering A 406 1-2 (2005): 74-77. http://www.scopus.com/inward/record.url?eid=2-s2.0-26944486228&partnerID=MN8TOARS.
    10.1016/j.msea.2005.06.020
  61. Segadães, A.M.; Carvalho, M.A.; Acchar, W.. "Using marble and granite rejects to enhance the processing of clay products". Applied Clay Science 30 1 (2005): 42-52. http://www.scopus.com/inward/record.url?eid=2-s2.0-22244485054&partnerID=MN8TOARS.
    10.1016/j.clay.2005.03.004
  62. Acchar, W.; Cairo, C.A.; Segadães, A.M.. "TEM study of a hot-pressed Al 2O 3-NbC composite material". Materials Research 8 1 (2005): 109-112. http://www.scopus.com/inward/record.url?eid=2-s2.0-27844556461&partnerID=MN8TOARS.
    10.1590/S1516-14392005000100019
  63. Correia, S.L.; Hotza, D.; Segadães, A.M.. "Optimising mechanical strength and bulk density of dry ceramic bodies through mixture design". Boletin de la Sociedad Espanola de Ceramica y Vidrio 44 1 (2005): 53-58. http://www.scopus.com/inward/record.url?eid=2-s2.0-33744517682&partnerID=MN8TOARS.
  64. Correia, S.L.; Hotza, D.; Segadães, A.M.. "Application of mathematical and statistical strategies to optimize ceramic bodies: Effects of raw materials on the technological properties". CFI Ceramic Forum International 82 1-2 (2005): http://www.scopus.com/inward/record.url?eid=2-s2.0-13444261043&partnerID=MN8TOARS.
  65. Chinarro, E.; Segadães, A.M.; Jurado, J.R.. "Catalyst preparation by combustion synthesis for electrochemical hydrocarbon devices". Journal of Solid State Electrochemistry 8 9 (2004): 606-610. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143058964&partnerID=MN8TOARS.
  66. Correia, S.L.; Curto, K.A.S.; Hotza, D.; Segadaes, A.M.. "Using statistical techniques to model the flexural strength of dried triaxial ceramic bodies". Journal of the European Ceramic Society 24 9 (2004): 2813-2818. http://www.scopus.com/inward/record.url?eid=2-s2.0-1842532914&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2003.09.009
  67. Correia, S.L.; Hotza, D.; Segadães, A.M.. "Simultaneous optimization of linear firing shrinkage and water absorption of triaxial ceramic bodies using experiments design". Ceramics International 30 6 (2004): 917-922. http://www.scopus.com/inward/record.url?eid=2-s2.0-2942654841&partnerID=MN8TOARS.
    10.1016/j.ceramint.2003.10.013
  68. Pereira, F.R.; Oliveira, A.P.; De Noni Jr., A.; Hotza, D.; Segadães, A.M.; Labrincha, J.A.. "Rheological behaviour of clay-based slurries: Effect of the preparation methods (Lab-scale or typical industrial procedures)". Industrial Ceramics 23 2 (2003): 87-92. http://www.scopus.com/inward/record.url?eid=2-s2.0-0142149073&partnerID=MN8TOARS.
  69. Segadães, A.M.; Carvalho, M.A.; Ferreira, H.C.. "Using phase diagrams to deal with moisture expansion". Ceramics International 29 8 (2003): 947-954. http://www.scopus.com/inward/record.url?eid=2-s2.0-17544391829&partnerID=MN8TOARS.
    10.1016/S0272-8842(03)00051-8
  70. Cruz, L.P.; Segadães, A.M.; Rocha, J.; Pedrosa De Jesus, J.D.. "An easy way to Pb(Mg1/3Nb2/3)O3 synthesis". Materials Research Bulletin 37 6 (2002): 1163-1173. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036574825&partnerID=MN8TOARS.
    10.1016/S0025-5408(02)00729-8
  71. Greca, M.C.; Moraes, C.; Segadães, A.M.. "Palladium/alumina catalysts: Effect of the processing route on catalytic performance". Applied Catalysis A: General 216 1-2 (2001): 267-276. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035413371&partnerID=MN8TOARS.
    10.1016/S0926-860X(01)00571-3
  72. Greca, M.C.; Moraes, C.; Morelli, M.R.; Segadães, A.M.. "Evaluation of Pd/alumina catalysts, produced by combustion synthesis, in the ethanol oxidation reaction to acetic acid". Applied Catalysis A: General 179 1-2 (1999): 87-92. http://www.scopus.com/inward/record.url?eid=2-s2.0-0003027572&partnerID=MN8TOARS.
  73. Sousa, V.C.; Segadães, A.M.; Morelli, M.R.; Kiminami, R.H.G.A.. "Combustion synthesized ZnO powders for varistor ceramics". International Journal of Inorganic Materials 1 3-4 (1999): 235-241. http://www.scopus.com/inward/record.url?eid=2-s2.0-0039726838&partnerID=MN8TOARS.
  74. Colomer, M.T.; Fumo, D.A.; Jurado, J.R.; Scgadães, A.M.. "Non-stoichiometric La(1-x)NiO(3-d) perovskites produced by combustion synthesis". Journal of Materials Chemistry 9 10 (1999): 2505-2510. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032730970&partnerID=MN8TOARS.
  75. Segadães, A.M.; Morelli, M.R.; Kiminami, R.G.A.. "Combustion synthesis of aluminium titanate". Journal of the European Ceramic Society 18 7 (1998): 771-781. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032117921&partnerID=MN8TOARS.
  76. Ana M. Segadães; Márcio M. Morelli; Ruth Herta Goldsmith Aliaga Kiminami; Segadães, A.M.; Morelli, M.M.; Kiminami, R.G.A.. "Combustion Synthesis of Aluminium Titanate: Thermal Stability". Key Engineering Materials 132-136 (1997): 209-212. https://doi.org/10.4028/www.scientific.net/KEM.132-136.209.
    Publicado • 10.4028/www.scientific.net/KEM.132-136.209
  77. Lopes, R.A.; Segadães, A.M.. "The Influence of Solid Type and Content on the Rheological Behaviour of Coagulated Slurries and Their Bearing on the Consolidation by Pressure Filtration". Journal of the European Ceramic Society 17 2-3 (1997): 339-343. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030962496&partnerID=MN8TOARS.
  78. Fumo, D.A.; Jurado, J.R.; Segadães, A.M.; Frade, J.R.. "Combustion synthesis of iron-substituted strontium titanate perovskites". Materials Research Bulletin 32 10 (1997): 1459-1470. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031249647&partnerID=MN8TOARS.
  79. Fumo, D.A.; Morelli, M.R.; Segadães, A.M.. "Combustion synthesis of calcium aluminates". Materials Research Bulletin 31 10 (1996): 1243-1255. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030268783&partnerID=MN8TOARS.
    10.1016/0025-5408(96)00112-2
  80. Lopes, R.A.; Segadães, A.M.. "Microstructure, permeability and mechanical behaviour of ceramic foams". Materials Science and Engineering A 209 1-2 (1996): 149-155. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030476260&partnerID=MN8TOARS.
  81. Moreira, M.C.; Segadães, A.M.. "Phase Equilibrium Relationships in the System Al2O3-TiO2-MnO, Relevant to the Low-Temperature Sintering of Alumina". Journal of the European Ceramic Society 16 10 (1996): 1089-1098. http://www.scopus.com/inward/record.url?eid=2-s2.0-13544276492&partnerID=MN8TOARS.
    10.1016/0955-2219(96)00024-6
  82. Greca, M.C.; Emiliano, J.; Segadães, A.M.. "Revised phase equilibrium relationships in the system Al2O3ZrO2SiO2". Journal of the European Ceramic Society 9 4 (1992): 271-283. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026720784&partnerID=MN8TOARS.
    10.1016/0955-2219(92)90062-I
  83. Greca, M. Conceição; Emiliano, J.V.; Segadães, Ana M.; M. Conceição Greca; J.V. Emiliano; Ana M. Segadães. "Phase Equilibrium Relationships in the System Al2O3-ZrO2-SiO2: An Update". Key Engineering Materials 53-55 (1991): 58-63. http://dx.doi.org/10.4028/www.scientific.net/kem.53-55.58.
    10.4028/www.scientific.net/kem.53-55.58
  84. A.M. Gonçalves; Ana M. Segadães. "Unshaped Refractories with Chemical Bonding". Materials Science Forum 34-36 (1991): 705-709. https://doi.org/10.4028/www.scientific.net/MSF.34-36.705.
    10.4028/www.scientific.net/MSF.34-36.705
  85. Greca, M.C.; Emiliano, J.V.; Segadaes, A.M.. "Phase equilibrium relationships in the system Al2O3-ZrO2-SiO2. An update". Key Engineering Materials 53-55 (1991): 58-63. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025898020&partnerID=MN8TOARS.
  86. Golden, Steve J.; Bloomer, Tamara E.; Lange, Fred F.; Segadaes, Ana M.; Vaidya, Kaushik J.; Cheetham, Anthony K.. "Processing and characterization of thin films of the two-layer superconducting phase in the Bi-Sr-Ca-Cu-O system: Evidence for solid solution". Journal of the American Ceramic Society 74 1 (1991): 123-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026102280&partnerID=MN8TOARS.
    10.1111/j.1151-2916.1991.tb07307.x
  87. Carvalho, M.A.; Frade, J.R.; Segadaes, A.M.. "CORROSION OF ALUMINO-SILICATE REFRACTORIES BY MOLTEN SALTS: EVALUATION AND TESTING.". British ceramic. Transactions and journal 86 3 (1987): 74-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-0023345697&partnerID=MN8TOARS.
  88. Segadaes, A.M.; Brett, N.H.; White, J.. "COMPATIBILITY RELATIONSHIPS IN MAGNESIA-CHROME REFRACTORIES: PART I. COMPOSITIONAL RELATIONSHIPS BETWEEN THE PHASES IN THE PRIMARY CRYSTALLIZATION VOLUMES OF PERICLASE IN THE SYSTEMS MgO-BINARY R//2O//3-CaO. SiO//2.". British ceramic. Transactions and journal 85 6 (1986): 194-200. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022808074&partnerID=MN8TOARS.
Livro
  1. Carvalho, M.A.; Segadães, A.M.. The hydration of magnesium phosphate cements: Effect of powder characteristics on the reaction kinetics. 2008.
    10.4028/www.scientific.net/MSF.591-593.833
  2. Ferreira, M.C.; Acchar, W.; Segadães, A.M.; Mello-Castanho, S.. Second-generation aluminium extraction residue used as devitrification aid for glass-ceramics. 2008.
    10.4028/www.scientific.net/MSF.587-588.773
  3. Silva, A.P.; Segadães, A.M.; Devezas, T.C.. MPT influence on the rheological behaviour of self-flow refractory castables. 2008.
    10.4028/www.scientific.net/MSF.587-588.133
  4. Silva, A.; Segadães, A.; Devezas, T.. Statistical modelling of the particle size composition of an alumina matrix for no-cement self-flowing refractory castables. 2006.
    10.4028/www.scientific.net/MSF.514-516.604
  5. Correia, S.L.; Curto, K.A.S.; Hotza, D.; Segadães, A.M.. Using experiments design to model linear firing shrinkage of triaxial ceramic bodies. 2005.
    10.4028/www.scientific.net/MSF.498-499.430
  6. Pereira, F.R.; Nunes, A.F.; Segadães, A.M.; Labrincha, J.A.. Refractory formulations made of different wastes and natural sub-products. 2004.
    10.4028/www.scientific.net/KEM.264-268.1743
  7. Carvalho, M.A.; Segadães, A.M.. Moisture expansion: Activation energy versus firing temperature. 2004.
    10.4028/www.scientific.net/KEM.264-268.1581
  8. Ferreira, H.S.; Segadães, A.M.; Kiminami, R.H.G.A.. Thermal behaviour of aluminium titanate combustion powders with MgO additions. 2002.
    10.4028/www.scientific.net/KEM.230-232.88
  9. Conceição Greca, M.; Morelli, M.M.; Segadães, A.M.; Moraes, C.. Ni/alumina catalysts produced by combustion synthesis. 1997.
    10.4028/www.scientific.net/KEM.132-136.205
Tese / Dissertação
  1. Pinto, Mário Moreira. "Influência da curva de cozedura no desenvolvimento de vidrados pretos na porcelana". Mestrado, 2017. http://hdl.handle.net/10773/22578.
  2. Schiavo, Lícia da Silva Alves. "Efeito da umidade no comportamento viscoelástico de misturas argila-rocha". Mestrado, 2016. https://repositorio.ucs.br/handle/11338/1295.
  3. Cano Ordoñez, Michell Felipe. "Efeito do empacotamento de partículas nas propriedades mecânicas e tribológicas de misturas de argila-rocha". Mestrado, 2016. https://repositorio.ucs.br/handle/11338/1196.
  4. Jose Parra Silva. "Incorporação de radionuclídeos em nanotubos naturais ativados". Mestrado, 2016. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-18072016-103729/.
  5. Silas Cardoso dos Santos. "Desenvolvimento de queimadores para iluminação a gás à base de silicato de terras raras". Doutoramento, 2014. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-30092014-105716/.
  6. Sousa, Cl?wsio Rog?rio Cruz de. "Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS". Doutoramento, 2014. http://repositorio.ufrn.br:8080/jspui/handle/123456789/12864.
  7. Webber, Jaíne. "Identificação e caracterização dos sítios superficiais de partículas de alumina e interações de adsorção com o ácido esteárico". Mestrado, 2014. https://repositorio.ucs.br/handle/11338/721.
  8. Silva, Ana Rita Moreira Rodrigues da. "Fundição em areia de ligas ferrosas". Mestrado, 2014. http://hdl.handle.net/10773/13941.
  9. Carvalho, Maria Arlete Carneiro Ribeiro de. "Cimentos de fosfato de magnésio: consolidação e caracterização". Doutoramento, 2013. http://hdl.handle.net/10773/11786.
  10. Silas Cardoso dos Santos. "Processamento coloidal de componentes cerâmicos para queimadores de gás". Mestrado, 2010. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-29082011-105822/.
  11. Luiz Fernando Grespan Setz. "Processamento Coloidal  de Cromito de Lantânio". Doutoramento, 2009. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-16112009-134948/.
  12. Neves, Nuno Miguel Pinto. "Avaliação das características de ligação do cimento de fosfato de magnésio em moldes de areia para fundição". Mestrado, 2008. http://hdl.handle.net/10773/2272.
  13. Pereira, Fabiano Raupp. "Valorização de resíduos industriais como fonte alternativa mineral: composições cerâmicas e cimentíceas". Doutoramento, 2006. http://hdl.handle.net/10773/4909.
  14. Carvalho, Maria Arlete Carneiro Ribeiro de. "Expansão por humidade de materiais cerâmicos de construção". Mestrado, 2002. http://hdl.handle.net/10773/21839.

Outros

Outra produção
  1. Effect of raw materials on linear shrinkage. 2004. Correia, S.L.; Hotza, D.; Segadães, A.M.. http://www.scopus.com/inward/record.url?eid=2-s2.0-25444497223&partnerID=MN8TOARS.
Distinções

Prémio

2010 BMBF-Green Talents Competition, trabalho de Doutoramento realizado por Janaína Accordi Junkes
Federal Ministry of Education and Research (BMBF), Alemanha
2003 Melhor trabalho apresentado no 47º Congresso Brasileiro de Cerâmica
Associação Brasileira de Cerâmica, Brasil
1989 Prémio Prof. Dr. Francisco Salles Vicente de Azevedo, melhor trabalho apresentado no 33º Congresso
Associação Brasileira de Cerâmica, Brasil
1982 Berthold Eichler Memorial Prize, Tese de Ph.D.
The University of Sheffield, Reino Unido

Outra distinção

2006 Homenagem da Associação Brasileira de Cerâmica em reconhecimento do desempenho profissional e pela colaboração prestada
Associação Brasileira de Cerâmica, Brasil