???global.info.a_carregar???
Miguel Azenha is an Associate Professor at the Structural Division in the Department of Civil Engineering, University of Minho, His research interests comprise: (i) numerical and experimental study of concrete at early ages regarding phenomena such as thermo-hygral-mechanical couplings, concrete properties evolution during hydration, creep and shrinkage; (ii) use of digital processes in construction, namely Building Information Modelling. Chairman of COST Action TU1404 ¿Towards the next generation of standards for service life of cement-based materials and structures¿, secretary of RILEM TC on ¿Thermal cracking of massive concrete structures¿. Coordinator of the Portuguese National Course in ¿Building Information Modelling¿ and member of the national BIM Drafting Committee. Director of the ERASMUS+ Master Course in Building Information Modelling.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Miguel Azenha

Nomes de citação

  • Azenha, M.

Identificadores de autor

Ciência ID
D413-AD32-EB56
ORCID iD
0000-0003-1374-9427

Endereços de correio eletrónico

  • miguel.azenha@civil.uminho.pt (Profissional)

Telefones

Telemóvel
  • (+351) 938404554 (Pessoal)

Moradas

  • Universidade do Minho, Escola de Engenharia, Departamento de Engenharia Civil. Campus de Azurém, 4800-058, Azurém, Guimarães, Portugal (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Civil
  • Ciências da Engenharia e Tecnologias - Engenharia Civil

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Português Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Francês Utilizador independente (B1) Utilizador independente (B1) Utilizador elementar (A1) Utilizador independente (B1)
Alemão Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1)
Japonês Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1)
Espanhol; Castelhano Utilizador independente (B1) Utilizador independente (B1) Utilizador elementar (A1) Utilizador independente (B1)
Formação
Grau Classificação
2023/01/26
Concluído
 Habilitation in Civil Engineering (Título de Agregado)
Universidade do Minho, Portugal
2009
Concluído
 Doutoramento em Engenharia Civil (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
"Numerical Simulation of the Structural Behaviour of Concrete Since its Early Ages" (TESE/DISSERTAÇÃO)
 Aprovado
2004
Concluído
 Mestrado em Estruturas de Engenharia Civil (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Comportamento do betão nas primeiras idades. Fenomenologia e análise termo-mecânica." (TESE/DISSERTAÇÃO)
 Muito Bom (unanimidade)
1995 - 2000
Concluído
 Engenharia Civil (Licenciatura)
Universidade do Porto, Portugal
 17
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2008/03/01 - 2008/08/31 Investigador (Investigação) Universidade do Porto Faculdade de Engenharia, Portugal
2005/08 - 2006/02 Investigador (Investigação) Universidade do Porto, Portugal
2005/01 - 2005/07 Investigador (Investigação) University of Tokyo, Japão
2003/11/01 - 2004/12/31 Investigador (Investigação) Universidade do Porto Faculdade de Engenharia, Portugal

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2023/12/01 - Atual Professor Associado (Docente Universitário) Universidade do Minho - Campus de Azurém, Portugal
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2012/03/01 - 2023/12/01 Professor Auxiliar (Docente Universitário) Universidade do Minho - Campus de Azurém, Portugal
Universidade do Minho - Campus de Azurém, Portugal
2010 - 2010 Assistente (Docente Universitário) Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2006/03/01 - 2008/02/29 Assistente Convidado (Docente Universitário) Universidade do Porto Faculdade de Engenharia, Portugal

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2009/12/09 - 2012/02/29 Assistant Lecturer (holding PhD degree) Universidade do Minho, Portugal
2000/06/01 - 2003/10/30 Structural design engineer STRENG Structural Engineering, Portugal
Projetos

Bolsa

Designação Financiadores
2021/01/01 - 2025/01/31 Sustainable Building Lime Applications via Circular Economy and Biomimetic Approaches
955986
Investigador responsável
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
 EU Framework Programme for Research and Innovation Marie Sklodowska-Curie Actions
Em curso
2018/08 - 2023/07 European Master in Building Information Modelling
599172-EPP-1-2018-1-PT-EPPKA1-JMD-MOB
 Education Audiovisual and Culture Executive Agency
2020/10/01 - 2022/09/30 SECCLASS - Sustainability Enhanced Construction Classification System
19
Investigador responsável
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
 EEA Grants
Em curso
2019/10/01 - 2022/09/30 CMMS - Cognitive Computerized Maintenance Management System
POCI-01-0247-FEDER-033574
Investigador responsável
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
 Agência Nacional de Inovação SA
Em curso
2019/09/01 - 2022/08/31 CircularBIM - Educational Platform Focused On Advanced Strategies Of Reinstatement Of Building Materials In The Industrial Value Chain To Promote The Transition To The Circular Economy Through The Use Of Bim Learning Technologies
CircularBIM
Investigador responsável
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
 Erasmus Plus
Em curso
2016 - 2019 IntegraCrete - A comprehensive multi-physics and multi-scale approach to the combined effects of applied loads and thermal/shrinkage deformations in reinforced concrete structures
FCT - PTDC/ECM-EST/1056/2014
 Fundação para a Ciência e a Tecnologia
2014 - 2018 COST Action TU1404 - Towards the next generation of standards for service life of cement-based materials and structures
COST TU1404
 COST Association
2014/03 - 2015/02 VisCoDyn - Innovative method for continuous monitoring of concrete viscoelastic properties since early ages
134348
Provided by PTCRIS: 134348
 Universidade de Coimbra
2011/03 - 2014/09 CutInDur - Long-term structural and durability performance of concrete elements strengthened with the NSM technique
112396
Provided by PTCRIS: 112396
 Universidade de Coimbra
2011/03 - 2014/08 PrePAM - Pre-fabricated thin panels using advanced materials for structural rehabilitation
114511
Provided by PTCRIS: 114511
 Universidade de Coimbra
2010/06 - 2013/12 DURCOST - Innovation in reinforcing systems for sustainable pre-fabricated structures of higher durability and enhanced structural performance
105700
Provided by PTCRIS: 105700
 Universidade de Coimbra
2010/06 - 2013/11 SeLCo - Service life behaviour of concrete structures: a multiphysics approach to self-induced stresses
99250
Provided by PTCRIS: 99250
 Universidade de Coimbra
2008/01 - 2011/04 Design-based concrete to enhance early age performance and durability. From nano to macro characterization.
Provided by PTCRIS: 70693
70693
 Universidade de Coimbra
2005/07 - 2008/06 Early Age Concrete: Behavioural Prediction
56458
Provided by PTCRIS: 56458
 Universidade de Coimbra

Projeto

Designação Financiadores
2023/03/12 - 2026/03/11 Monitorização inteligente da integridade estrutural de infraestruturas rodoviárias utilizando transdutores piezoelétricos em pavimentos
2022.06879.PTDC
10.54499/2022.06879.PTDC
Universidade do Minho, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/05/01 - 2025/04/30 RecycleBIM - Integrated Planning and Recording Circularity of Construction Materials through Digital Modelling
ERA-MIN3/0006/2021
Universidade do Minho, Portugal
Em curso
2021/03/29 - 2024/03/28 Towards Durability Design of FRP Composites for Civil Engineering Structures
PTDC/ECI-EGC/4609/2020
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal

Laboratório Nacional de Engenharia Civil, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2019/10/01 - 2023/09/30 SUBLIME - Sustainable building lime applications via circular economy and biomimetic approaches
SEP-210562083
Universidade do Minho - Campus de Azurém, Portugal
Em curso
2019/10/19 - 2022/10/18 Cognitive Computerized Maintenance Management System
Cognitive CMMS - 33574
Universidade do Minho - Campus de Azurém, Portugal
Concluído
2020/10/01 - 2022/10/01 SECCLASS - Sustainability Enhanced Construction Classification System
SECClasS
Universidade do Minho - Campus de Azurém, Portugal
Concluído
2018/07/26 - 2022/01/21 Prefabricated Urban Furniture Made by Advanced Materials for Protecting Public Built Environment
PTDC/ECI-EGC/28256/2017
Universidade do Minho, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/05/01 - 2021/12/31 Development of Advanced Fibre Optic Sensors to Monitor the Durability of Concrete and Reinforced Concrete Structures
PTDC/ECI-EGC/31220/2017
Universidade do Minho, Portugal

Instituto de Engenharia de Sistemas e Computadores Tecnologia e Ciência, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2018/06/07 - 2021/10/05 Advanced prefabricated multifunctional floating dock system for tidal energy capitation and coastal protection
PTDC/ECI-EGC/28112/2017
Universidade do Minho, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2019/09/01 - 2021/08/31 CircularBIM – Educational platform focused on advanced strategies of reinstatement of building materials in the industrial value chain to promote the transition to the circular economy through the use of BIM learning technologies
2019-1-ES01-KA203-065962
Concluído
2011/03/21 - 2014/09/20 CutInDur - Long-term structural and durability performance of concrete elements strengthened with the NSM technique
PTDC/ECM/112396/2009
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/03/01 - 2014/08/31 PrePAM - Pre-fabricated thin panels using advanced materials for structural rehabilitation
PTDC/ECM/114511/2009
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/06/14 - 2013/12/13 DURCOST - Innovation in reinforcing systems for sustainable pre-fabricated structures of higher durability and enhanced structural performance
PTDC/ECM/105700/2008
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2008/01/01 - 2011/04/30 Design-based concrete to enhance early age performance and durability. From nano to macro characterization.
PTDC/ECM/70693/2006
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2005/07/01 - 2008/06/30 Early Age Concrete: Behavioural Prediction
POCI/ECM/56458/2004
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Manuel Parente; Granja, José; Miguel Azenha. "RecycleBIM: a framework for the circularity of construction materials through digital modelling". 2023.
  2. Anil, Achushankar; Parente, Manuel Afonso; Azenha, M.. "Efficient data management in a BIM-based framework for circularity of products and materials". 2023.
    10.5281/zenodo.10034111
  3. Salas, Luis Felipe Moreira; Azenha, Miguel; Ferrão, José Manuel Miranda. "AR-enhanced collaborative environment for Facility Management supported by OpenBIM". 2023.
    10.5281/zenodo.10034163
  4. Almeida, Laura Gomes; Azenha, Miguel; Lima, Filipe; Roux, Sébastien. "Contribution to the Revision of the Portuguese Rules of Measurement Towards a Standardized BIM-Based Industry". 2023.
    10.5281/zenodo.10034135
  5. Ricardo J. G. Mateus; Francisco Silva Pinto; Judith Fauth; Miguel Azenha; José Granja; Ricardo Veludo; Bruno Muniz; João Reis; Pedro Marques. "Improving Regulations for Automated Design Checking Through Decision Analysis Good Practices: A Conceptual Application to the Construction Sector". 2023.
    10.1007/978-3-031-38241-3_19
  6. Rafael Cabral; Rogério Oliveira; Diogo Ribeiro; Ricardo Santos; Miguel Azenha; Anna Rakoczy; José Correia; João Manuel R.S. Tavares. "Railway bridge condition assessment based on state-of-the-art reality capture technologies: application to a case study". 2023.
    10.35490/ec3.2023.329
  7. Renan Rocha Ribeiro; José Granja; Rodrigo Lameiras; Miguel Azenha. "A Cost-Effective Micro-controller Based System for EMM-ARM Tests in Cement Paste". 2023.
    10.1007/978-3-031-33211-1_36
  8. Mohamad El Sibaii; Renan Rocha Ribeiro; Ricardo Dias; José Rui Pinto; José Granja; Miguel Azenha; Renan Rocha Ribeiro; José Granja; Miguel Azenha. "Towards Standardization of Data for Structural Concrete: Product Data Templates". 2023.
    10.1007/978-3-031-33211-1_24
  9. Cláudio Ferreira; Dirk Schlicke; Carlos Sousa; Miguel Azenha; Cláudio Ferreira; Miguel Azenha. "Early-Age to Long-Term Numerical Simulation of Concrete Members Tested in Adjustable Restraining Frames". 2023.
    10.1007/978-3-031-33211-1_89
  10. Artur Kuzminykh; Manuel Parente; Vasco Vieira; José Granja; Miguel Azenha; Manuel Parente; Vasco Vieira; José Granja; Miguel Azenha. "RecycleBIM Approach Towards Integrated Data Management for Circularity: Proof of Concept in a RC Building". 2023.
    10.1007/978-3-031-33211-1_23
  11. Thomas Russo; Miguel Azenha; José Granja. "Open-Source EMM-ARM Implementation for Mortars Based on Single-Board Computer". 2023.
    10.1007/978-3-031-33211-1_34
  12. Briceno, C.; Azenha, M.; Vasconcelos, Graça; Lourenço, Paulo B.. "Influencia del acondicionamiento de ladrillos de arcilla sobre la resistencia a la adherencia por corte de la albañilería". Trabalho apresentado em 6as Jornadas Portuguesas de Engenharia de Estruturas / Encontro Nacional de Betão Estrutural 2022, Lisboa, 2022.
    Publicado
  13. Kheradmand, Mohammad; Vicente, Romeu; Azenha, Miguel; Aguiar, J. L. Barroso de. "Early age temperature control in mass concrete through incorporation of dispersed Phase Change Materials (PCMs)". 2020.
    10.1007/978-3-030-76551-4_2
  14. Rzhvskyi, A.; Bil, E.A.; Witeck, G.; Aquere, A.L.; Lima, R.M.; Granja, J.; Azenha, M.. "Communication tools used by distributed teams in a BIM learning project". 2020.
  15. Ferreira, José; Azenha, Miguel; Mendes, Nuno Adriano Leite; Ferreira, José Paulo Fonseca. "Ensaios virtuais à rotura em estruturas de betão armado com base em modelos BIM". 2020.
    10.24840/978-972-752-272-9_0443-0453
  16. Gualberto, Natália; Couto, J. Pedro; Azenha, Miguel. "Implementação BIM ao nível do licenciamento municipal: verificação automatizada do RGEU". 2020.
    10.24840/978-972-752-272-9_0857-0866
  17. El Sibaii, Mohamad; Marques, Cátia; Bidarra, Luis; Azenha, Miguel. "Rumo à modelação eficiente de parâmetros geotécnicos em BIM". 2020.
    10.24840/978-972-752-272-9_0523-0532
  18. Lopes, Gonçalo Correia; Vicente, Romeu; Ferreira, Tiago Miguel; Azenha, Miguel; Rodrigues, Hugo. "BIM-based methodology for the seismic performance assessment of existing buildings". 2020.
  19. Azenha, Miguel; Barontini, Alberto; Oliveira, Daniel V.; Alarcón, Carlo; Sousa, Hélder S.; Masciotta, Maria Giovanna. "Monitorização e conservação preventiva de património histórico com BIM: o projeto HeritageCare". 2020.
    10.24840/978-972-752-272-9_0643-0653
  20. Azenha, M.. "Controlling crack formation since early ages: contributions of COST Action TU1404 and research project IntegraCrete". Trabalho apresentado em Nordic Workshop: Design and construction of sustainable concrete structures. Causes, calculation and consequences of cracks, Oslo, 2019.
  21. Zmij, A.; Klemczak, B.; Azenha, M.; Azenha, M.; Schlicke, D.. "Consideration of soil temperature in the modelling of early-age mass concrete slab". Trabalho apresentado em 4th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium. WMCAUS 2019, Prague, 2019.
    10.1088/1757-899X/603/2/022095
  22. Cruz, P.J.S.; Azenha, M.; Mateus, R.; Magalhães, T.; Granja, J.L.. "BIM as a tool for setting and infrastructure management". Trabalho apresentado em The 5th International Workshop on UI GreenMetric World University Rankings (IWGM 2019). Sustainable University in a Changin World: Lessons, Challenges and Opportunities, 2019.
  23. Morais, M.J.; Masciotta, M.-G.; Ramos, L.F.; Oliveira, D.V.; Azenha, M.; Pereira, E.B.; Lourenço, P.B.; Ferreira, T.C.; Monteiro, P.. "A proactive approach to the conservation of historic and cultural Heritage: The HeritageCare methodology". 2019.
  24. Zadeh, Behzad Zahabi; Behbahani, Ali Edalat; Gomes, José Guimarães; Granja, José Luís Duarte; Faria, Rui; Azenha, Miguel. "Medição do coeficiente de dilatação térmica do betão nas primeiras idades: Um novo método experimental baseado no aquecimento/arrefecimento interno". 2019.
  25. Lopes, Gonçalo Correia; Vicente, Romeu; Ferreira, Tiago Miguel; Azenha, Miguel. "Desafios e direções de investigação na identificação e caracterização de tipologias de edifícios de alvenaria intervencionados com recurso e betão armado". 2019.
  26. Ramesh, Meera; Azenha, Miguel; Lourenço, Paulo B.. "Impact of moisture curing conditions on mechanical properties of lime-cement mortars in early ages". 2019.
  27. Ramesh, Meera; Azenha, Miguel; Lourenço, Paulo B.; Ramesh, M.; Azenha, M.; Lourenço, P.B.. "Mechanical characterization of lime cement mortars: e-modulus and fracture energy". Trabalho apresentado em International Conference on Sustainable Materials, Systems and Structures (SMSS 2019). Durability, monitoring and repair of structures, Rovinj, 2019.
  28. Gomes, J.; Azenha, M.; Granja, J.L.; Faria, R.; Sousa, C.; Zahabizadeh, B.; Edalat-Behbahani, A.; Schlicke, D.. "Proposal of a test set up for simultaneous application of axial restraint and vertical loads to slab-like specimens: sizing principles and application". Trabalho apresentado em SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, 2018.
  29. Sousa, C.; Azenha, M.; Ferreira, C.; Faria, R.. "Parametric study of the minimum required reinforcement for cracking control in thick restrained RC members based on thermo-hygro-mechanical FE analyses". Trabalho apresentado em SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, 2018.
  30. Mazaheripour, H.; Abrishambaf, A.; Faria, R.; Azenha, M.; Ye, G.. "Microstructure-based prediction of thermal properties of cement paste at early ages". Trabalho apresentado em SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, 2018.
  31. Šmilauer, V.; Gasch, T.; Delaplace, A.; Bouhjiti, D.; Kanavaris, F.; Azenha, M.; Lacarrière, L.. "Macroscopic hygro-mechanical modeling of restrained ring test: results from COST TU1404 benchmark". Trabalho apresentado em SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, 2018.
  32. Azenha, M.; Sousa, G.; Matos, J.; Sena-Cruz, J.; Brito, V.. "Integrated application of advanced surveying techniques and BIM for inspection and asset management of reinforced concrete bridges". Trabalho apresentado em SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, 2018.
    http://dx.doi.org/10.5281/zenodo.1405563
  33. Azenha, M.; Monteiro, C.; Morais, R.. "A 3D printer of cement mortars based on initial deposition of dry materials". Trabalho apresentado em SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, 2018.
  34. Azenha, M.; Mazaheripour, H.; Faria, R.; Ye, G.; Schlangen, E.. "Microstructure-based 3d modelling of diffusivity in sound and cracked cement paste". Trabalho apresentado em 72nd RILEMWEEK 2018 & CONMOD2018 International Symposium on Concrete Modelling, Delft, 2018.
  35. Azenha, M.; Granja, J.L.; Gomes, J.; Carvalho, R.; Zahabizadeh, B.; Edalat-Behbahani, A.; Faria, R.; et al. "Performance of RC slabs under the combined effect of applied loads and restrained shrinkage". Trabalho apresentado em Sixth International Conference on the Durability of Concrete Structures, Leeds, 2018.
  36. Ramesh, M.; Azenha, M.; Lourenço, P.B.. "A systematic study of the effects of lime-cement ratio in the mechanical properties of blended mortars". 2018.
  37. Ramos, L.F.; Masciotta, M.G.; Morais, M.J.; Azenha, M.; Ferreira, T.; Pereira, E.B.; Lourenço, P.B.. "HeritageCARE: Preventive conservation of built cultural heritage in the south-west Europe". 2018.
    10.1201/9781351014793-16
  38. Cruz, P.J.S.; Azenha, M.. "The challenges of adopting BIM for setting and infrastructure management of University of Minho". 2018.
    10.1051/e3sconf/20184802002
  39. Lameiras, R.; Barros, J.; Valente, I.B.; Azenha, M.. "Flexural behaviour of an innovative connection for structural sandwich panels". 2018.
  40. Azenha, M.; Faria, R.; Granja, J.L.; Sousa, C.; Carvalho, R.; Mazaheripour, H.; Zahabizadeh, B.; et al. "Thermo-hygro-mechanical modelling of concrete structures in service life: a multi-scale approach in the IntegraCrete project". Trabalho apresentado em 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures - EAC2, Brussels, 2017.
  41. Serdar, M.; Staquet, S.; Gabrijel, I.; Cizer, O.; Nanukuttan, S.; Bokan-Bosiljkov, V.; Rozière, E.; et al. "COST Action TU1404: recent advances of the Extended Round Robin Test RRT+". Trabalho apresentado em 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures - EAC2, Brussels, 2017.
  42. Mazaheripour, H.; Faria, R.; Ye, G.; Schlangen, E.; Granja, J.L.; Azenha, M.. "Microstructure-based modelling prediction of elasticity in hydrating cement paste". Trabalho apresentado em 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures - EAC2, Brussels, 2017.
  43. Bokan Bosiljkov, V.; Serdar, M.; Staquet, S.; Azenha, M.. "Progress on testing of mechanical properties of cement-based materials - Extended Round Robin Test of COST Action TU1404". Trabalho apresentado em International Conference on Advances in Construction Materials and Systems. 71st RILEM Week, Chennai, 2017.
  44. Matos, A.M.; Granja, J.L.; Nunes, S.; Aguiar, J.B.; Azenha, M.. "NDT testing of stiffness evolution of UHPFRC since casting". Trabalho apresentado em 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures - EAC2, Brussels, 2017.
  45. Granja, J.L.; Azenha, M.. "Assessing the mechanical behaviour of concrete before and during setting with a resonance based technique: preliminary prototypes and results". Trabalho apresentado em 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures - EAC2, Brussels, 2017.
  46. Conceição, J.; Faria, R.; Azenha, M.. "Thermo-mechanical analysis of an arch dam monolith during construction". Trabalho apresentado em Congreso de Métodos Numéricos en Ingeniería, Valencia, 2017.
  47. Fairbairn, E.; Azenha, M.. "Current developments of RILEM TC 254-CMS ‘Thermal Cracking of Massive Concrete Structures". Trabalho apresentado em CONCRACK 5 – JCI-RILEM International Workshop on "Control of Cracking of Mass Concrete and Related Issues Concerning Early Age Cracking of Concrete Structures, Tokyo, 2017.
  48. Staquet, S.; Serdar, M.; Delsaute, B.; Roziere, E.; Schlicke, D.; Nanukuttan, S.; Azenha, M.. "Further works on concrete at early age coordinated within COST TU1404 European Project". Trabalho apresentado em CONCRACK 5 – JCI-RILEM International Workshop on "Control of Cracking of Mass Concrete and Related Issues Concerning Early Age Cracking of Concrete Structures, Tokyo, 2017.
  49. Klemczak, B.; Zmij, A.; Azenha, M.. "Numerical Study on Restraints Effects in Massive Foundation Slabs". 2017.
    10.1016/j.proeng.2017.06.208
  50. Azenha, M.; Silva, J.; Granja, J.; Gomes-Correia, A.. "A Retrospective View of EMM-ARM: Application to Quality Control in Soil-improvement and Complementary Developments". 2016.
    10.1016/j.proeng.2016.06.043
  51. Silva, J.; Azenha, M.; Correia, A.G.; Rios, L.. "Assessment of the Small Strain Stiffness of a Sand-Cement Mixture by Cyclic and Dynamic Test Methods". 2016.
    10.1061/9780784480083.013
  52. Pereira, C.; Granja, J.; Gomes Correia, A.; Ferreira, C.; Azenha, M.; Nazarian, S.. "Combined bender elements and accelerometers system: Measurement and interpretation". 2016.
  53. Sena-Cruz, J.; Fernandes, P.; Coelho, M.; Silva, P.; Granja, J.; Benedetti, A.; Azenha, M.; Neves, L.. "Bond on NSM CFRP systems: Recent contributions of uminho on durability, quality control and design". 2016.
  54. Silva, P.; Escusa, G.; Sena-Cruz, J.; Azenha, M.. "Experimental investigation of RC slabs strengthened with NSM CFRP system subjected to elevated temperatures up to 80 °C". 2016.
  55. Kheradmand, M.; Azenha, M.; Castro-Gomes, J.; Aguiar, J.. "Energy saving potential of cement-based mortar containing hybrid phase change materials applied in building envelopes". 2016.
  56. Granja, J.; Azenha, M.. "Continuous Monitoring of Concrete Mechanical Properties since an Early Age to Support Construction Phasing". 2015.
    10.1061/9780784479346.161
  57. Azenha, M.; Granja, J.; Oliveira, R.. "Innovative Method for the Continuous Monitoring of Concrete Viscoelastic Properties since Early Ages: Concept and Pilot Experiments". 2015.
    10.1061/9780784479346.162
  58. Silva, P.; Fernandes, P.; Sena-Cruz, J.; Azenha, M.; Barros, J.. "Behaviour of concrete elements strengthened with near surface mounted CFRP strips under thermal cycles". 2014.
  59. Fernandes, P.; Granja, J.; Sena-Cruz, J.; Azenha, M.; Benedetti, A.. "A new methodology for assisting quality control of NSM-CFRP systems since very early ages". 2014.
  60. Silva, P.; Fernandes, P.; Sena-Cruz, J.; Azenha, M.; Barros, J.. "Creep behavior and durability of concrete elements strengthened with NSM CFRP strips". 2014.
  61. Fernandes, P.; Silva, P.; Sena-Cruz, J.; Azenha, M.; Teixeira, T.; Barros, J.. "Bond and flexural behaviour of a NSM CFRP strengthening system under fatigue loading". 2014.
  62. Boulay, C.; Staquet, S.; Azenha, M.; Deraemaeker, A.; Crespini, M.; Carette, J.; Granja, J.; et al. "Monitoring elastic properties of concrete since very early age by means of cyclic loadings, ultrasonic measurements, natural resonant frequency of composite beam (EMM-ARM) and with smart aggregates". 2013.
  63. Silva, J.; Azenha, M.; Gomes Correia, A.; Silva, Jacinto; Azenha, Miguel; Gomes Correia, António. "An innovative approach for continuous measurement of cemented sand stiffness immediately after layer compaction". 2012.
  64. Lameiras, R.; Valente, I.; Barros, J.; Azenha, M.; Ferreira, P.. "Fibre reinforced polymer (FRP) connectors for Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC) sandwich panels". 2012.
  65. Aguilar, R.; Ramos, L.F.; Azenha, M.. "The use of continuous system identification for evaluation of concrete E-modulus evolution: Laboratory and field applications". 2012.
    10.1007/978-1-4614-2419-2_41
  66. Azenha, M.; Faria, Rui; Azenha, Miguel Ângelo Dias. "Continuous monitoring of cement paste E-modulus since casting: A method based on modal identification". Trabalho apresentado em International conference on advances in construction materials through science and engineering, Hong Kong, 2011.
    Publicado
  67. Azenha, M.. "Smart PCM-Based coating for enhanced thermal confort in buildings". Trabalho apresentado em 7th International conference of diffusion in solids an liquids, Vilamoura, 2011.
    Publicado
  68. Azenha, M.. "Composite coating based on the incorporation of PCM into cement based rendering motars". Trabalho apresentado em 7th internationl conference on diffusion in solids and liquids, Vilamoura, 2011.
    Publicado
  69. Azenha, M.. "Elasticity Modulus Monitoring through an ambient vibration response method - Application to cement based pastes". Trabalho apresentado em International Symposium on Nondesctrutive Testing of materials and structures, Istambul, 2011.
    Publicado • 10.1007/978-94-007-0723-8_64
  70. Aguilar, R.; Ramos, L.F.; Azenha, M.. "Automatic system identification algorithm for processing ambient vibration data". 2011.
  71. Azenha, M.; Ferreira, C.; Silva, J.; Correia, A.G.; Aguilar, R.; Ramos, L.F.. "Continuous stiffness monitoring of cemented sand through resonant frequency". 2011.
    10.1061/47629(408)22
  72. Azenha, M.. "New method for continous monitoring of concrets E-modulus since casting using an output-only modal identification techenique". Trabalho apresentado em 6th International conference on concrete under severe conditions, Mérida, 2010.
    Publicado
  73. Azenha, M.; Magalhães, F.; Faria, R.; Cunha, A.. "New method for continuous monitoring of concrete E-modulus since casting". 2010.
  74. "Hygro-mechanical simulation of drying shrinkage in concrete elements". Trabalho apresentado em METNUM09, Barcelona, 2009.
    Publicado
  75. "Parametric study of the influence of heat curing methods in residual stresses of precast bridge beams". Trabalho apresentado em CCCC2008, Porto, 2008.
    Publicado
  76. Azenha, M.; Azenha, M.; Sousa, C.; Faria, R.. "Numerical analysis of a RC slab considering the combined effect of self induced stresses and external loads". Trabalho apresentado em CONCREEP, Ise Shima, 2008.
    Publicado
  77. "Influence of monisture losses at early ages on concrete cover quality: A numerical aproach". Trabalho apresentado em International RILEM worshop, Guimarães, 2007.
    Publicado
  78. "Numerical simulation of the restrained concrete shrinkage in thr ring test". Trabalho apresentado em VI Simposio EPUSP sobre estruturas, São Paulo, 2007.
    Publicado
  79. "Thermo-mechanical analysys of young concrete. Application to a restrained slab". Trabalho apresentado em 16th european condefrence of fractures, Alexandropolius, 2006.
    Publicado
  80. "Numerical simulation of concrete strutural behavior at early ages". Trabalho apresentado em 6th international PHD soposium in civil engineering, Zurich, 2006.
    Publicado
  81. "Restrained concrete Ring test: Experimental campaign and numerical simulation". Trabalho apresentado em International conference on concrete for structurs, Ciombra, 2005.
    Publicado
  82. "Risk of concrete craking at early ages". Trabalho apresentado em 46 congresso brasileiro do concreto, Florianópolis, 2004.
    Publicado
Artigo em revista
  1. Inês Caetano; Débora Pinto; João Silva; Yessica Barbosa; Luís Sanhudo; João Poças Martins; Margarida Amândio; et al. "GESTÃO DE INFRAESTRUTURAS PÚBLICAS ATRAVÉS DO BIM: MODELAÇÃO DE TÚNEIS FERROVIÁRIOS DAS INFRAESTRUTURAS DE PORTUGAL". Revista de Ativos de Engenharia (2024): https://doi.org/10.29073/rae.v2i1.796.
    10.29073/rae.v2i1.796
  2. Soares, Thaís R. L.; Kieliba, Ilona; Azenha, M.; Tonnesen, Thorsten; Lourenço, Paulo B.. "A theta projection model for compressive creep behaviour of refractories at high temperature: application to alumina-spinel". Meccanica 58 12 (2023): 2401-2420. http://dx.doi.org/10.1007/s11012-023-01734-6.
    10.1007/s11012-023-01734-6
  3. Kontic, Ana; Vasconcelos, Graça; Briceño Melendez, Carolina; Azenha, M.; Sokolovic, Neda. "Influence of air entrainers on the properties of hydrated lime mortars". Construction and Building Materials 403 (2023): 132968. http://dx.doi.org/10.1016/j.conbuildmat.2023.132968.
    10.1016/j.conbuildmat.2023.132968
  4. Meera Ramesh; Manuel Parente; Miguel Azenha; Paulo B. Lourenço. "Influence of Lime on Strength of Structural Unreinforced Masonry: Toward Improved Sustainability in Masonry Mortars". Sustainability (2023): https://doi.org/10.3390/su152115320.
    10.3390/su152115320
  5. Granja, José; Ribeiro, Renan Rocha; Russo, Thomas; Lameiras, Rodrigo; Azenha, M.. "Influence of Temperature in the Early-age Elastic Modulus Evolution of Cement Pastes and Concrete". Journal of Advanced Concrete Technology 21 10 (2023): 803-820. http://dx.doi.org/10.3151/jact.21.803.
    10.3151/jact.21.803
  6. Kanavaris, Fragkoulis; Coelho, Mário; Ferreira, Nuno; Azenha, M.; Andrade, Carmen. "A review on the effects of cracking and crack width on corrosion of reinforcement in concrete". Structural Concrete 24 6 (2023): 7272-7294. http://dx.doi.org/10.1002/suco.202300227.
    10.1002/suco.202300227
  7. Rafael Cabral; Rogério Oliveira; Diogo Ribeiro; Anna M. Rakoczy; Ricardo Santos; Miguel Azenha; José Correia. "Railway Bridge Geometry Assessment Supported by Cutting-Edge Reality Capture Technologies and 3D As-Designed Models". Infrastructures (2023): https://doi.org/10.3390/infrastructures8070114.
    10.3390/infrastructures8070114
  8. Thomas Russo; Renan Rocha Ribeiro; Amir Araghi; Rodrigo de Melo Lameiras; José Granja; Miguel Azenha. "Continuous Monitoring of Elastic Modulus of Mortars Using a Single-Board Computer and Cost-Effective Components". Buildings (2023): https://doi.org/10.3390/buildings13051117.
    10.3390/buildings13051117
  9. Žuric, Jelena; Zichi, Alessandro; Azenha, M.. "Integrating HBIM and Sustainability Certification: A Pilot Study Using GBC Historic Building Certification". International Journal of Architectural Heritage 17 9 (2023): 1464-1483. http://dx.doi.org/10.1080/15583058.2022.2042623.
  10. Agnieszka Jedrzejewska; Mariusz Zych; Fragkoulis Kanavaris; Fangjie Chen; Shintaro Ito; Jean Michel Torrenti; Dirk Schlicke; Shingo Asamoto; Miguel Azenha. "Standardized models for cracking due to restraint of imposed strains—The state of the art". Structural Concrete (2023): https://doi.org/10.1002/suco.202200301.
    10.1002/suco.202200301
  11. Matos, Ana Mafalda; Granja, José; Nunes, Sandra; Barroso-Aguiar, José L.; Azenha, M.. "Hardening characterisation of a non-proprietary and more eco-friendly UHPC". Construction and Building Materials 363 (2023): 129803. http://dx.doi.org/10.1016/j.conbuildmat.2022.129803.
    10.1016/j.conbuildmat.2022.129803
  12. Milinovic, Jelena; Vale, Carlos; Azenha, M.. Autor correspondente: Milinovic, Jelena. "Recent advances in multivariate analysis coupled with chemical analysis for soil surveys: a review". Journal of soils and sediments 23 3 (2023): 1085-1098.
    Publicado
  13. Lucas Vieira; Marta Campos; José Granja; Miguel Azenha. "Framework for (semi) automatised construction specification and quantity takeoff in the context of small and medium architectural design offices". Architecture, Structures and Construction (2022): https://doi.org/10.1007/s44150-022-00071-8.
    10.1007/s44150-022-00071-8
  14. Žuric, Jelena; Zichi, Alessandro; Azenha, M.. "Integrating HBIM and Sustainability Certification: A Pilot Study Using GBC Historic Building Certification". International Journal of Architectural Heritage 17 9 (2022): 1464-1483. http://dx.doi.org/10.1080/15583058.2022.2042623.
    10.1080/15583058.2022.2042623
  15. Aneta Smolana; Barbara Klemczak; Miguel Azenha; Dirk Schlicke. "Thermo-Mechanical Analysis of Mass Concrete Foundation Slabs at Early Age—Essential Aspects and Experiences from the FE Modelling". Materials (2022): https://doi.org/10.3390/ma15051815.
    10.3390/ma15051815
  16. Miguel Azenha; Fragkoulis Kanavaris; Dirk Schlicke; Agnieszka Jedrzejewska; Farid Benboudjema; Tulio Honorio; Vít Šmilauer; et al. "Recommendations of RILEM TC 287-CCS: thermo-chemo-mechanical modelling of massive concrete structures towards cracking risk assessment". Materials and Structures 54 4 (2021): https://doi.org/10.1617/s11527-021-01732-8.
    10.1617/s11527-021-01732-8
  17. Jesús Balado; Lucía Díaz-Vilariño; Miguel Azenha; Paulo B. Lourenço; Balado, Jesús; Díaz-Vilariño, Lucía; Azenha, M.; Lourenço, Paulo B.. "Automatic Detection of Surface Damage in Round Brick Chimneys by Finite Plane Modelling from Terrestrial Laser Scanning Point Clouds. Case Study of Bragança Dukes’ Palace, Guimarães, Portugal". International Journal of Architectural Heritage 17 2 (2021): 389-403. https://doi.org/10.1080/15583058.2021.1925779.
    10.1080/15583058.2021.1925779
  18. Alberto Barontini; Carlo Alarcon; Hélder S. Sousa; Daniel V. Oliveira; Maria Giovanna Masciotta; Miguel Azenha. "Development and Demonstration of an HBIM Framework for the Preventive Conservation of Cultural Heritage". International Journal of Architectural Heritage (2021): https://doi.org/10.1080/15583058.2021.1894502.
    10.1080/15583058.2021.1894502
  19. Kanavaris, F.; Jedrzejewska, A.; Sfikas, I.P.; Schlicke, D.; Kuperman, S.; Šmilauer, V.; Honório, T.; et al. "Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations". Construction and Building Materials 271 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85096575276&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2020.121570
  20. Lameiras, Rodrigo; Barros, Joaquim A. O.; Valente, Isabel B.; Poletti, Elisa; Azevedo, Matilde; Azenha, Miguel. "Seismic behaviour of precast sandwich wall panels of steel fibre reinforced concrete layers and fibre reinforced polymer connectors". (2021): http://hdl.handle.net/1822/72145.
    10.1016/j.engstruct.2021.112149
  21. Mateus Antônio Nogueira Oliveira; Miguel Ângelo Dias Azenha; Paulo José Brandão Barbosa Lourenço; José Victor Brasil de Souza. "Evolução do Processo de Carbonatação em Argamassas de Cal Aérea". Matéria (Rio de Janeiro) (2021): https://doi.org/10.1590/s1517-707620210003.13016.
    10.1590/s1517-707620210003.13016
  22. Autiero, F.; Ramesh, M.; Azenha, M.; Di Ludovico, M.; Prota, A.; Lourenço, P.B.. "Experimental analysis of lime putty and pozzolan-based mortar for interventions in archaeological sites". Materials and Structures/Materiaux et Constructions 54 4 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85109218578&partnerID=MN8TOARS.
    10.1617/s11527-021-01746-2
  23. Kanavaris, F.; Ferreira, C.; Sousa, C.; Azenha, M.. "Thermo-chemo-hygro-mechanical simulation of the restrained shrinkage ring test for cement-based materials under distinct drying conditions". Construction and Building Materials 294 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85107679116&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2021.123600
  24. Mazaheripour, H.; Faria, R.; Azenha, M.; Ye, G.. "Modelling macroscopic shrinkage of hardened cement paste considering C-S-H densification". Advances in Cement Research 33 6 (2021): 257-284. http://www.scopus.com/inward/record.url?eid=2-s2.0-85108201473&partnerID=MN8TOARS.
    10.1680/jadcr.19.00141
  25. Charpin, L.; Niepceron, J.; Corbin, M.; Masson, B.; Mathieu, J.-P.; Haelewyn, J.; Hamon, F.; et al. "Ageing and air leakage assessment of a nuclear reactor containment mock-up: VERCORS 2nd benchmark". Nuclear Engineering and Design 377 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85102467350&partnerID=MN8TOARS.
    10.1016/j.nucengdes.2021.111136
  26. Smolana, A.; Klemczak, B.; Azenha, M.; Schlicke, D.. "Early age cracking risk in a massive concrete foundation slab: Comparison of analytical and numerical prediction models with on-site measurements". Construction and Building Materials 301 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85109636383&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2021.124135
  27. Correia Lopes, G.; Mendes, N.; Vicente, R.; Ferreira, T.M.; Azenha, M.. "Numerical simulations of derived URM-RC buildings: Assessment of strengthening interventions with RC". Journal of Building Engineering 40 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85103233085&partnerID=MN8TOARS.
    10.1016/j.jobe.2021.102304
  28. Sousa, R.P.C.L.; Figueira, R.B.; Gomes, B.R.; Costa, S.P.G.; Azenha, M.; Pereira, R.F.P.; Manuela Raposo, M.. "Organic-inorganic hybrid sol-gel materials doped with a fluorescent triarylimidazole derivative". RSC Advances 11 40 (2021): 24613-24623. http://www.scopus.com/inward/record.url?eid=2-s2.0-85111078393&partnerID=MN8TOARS.
    10.1039/d1ra03997k
  29. Smolana, A.; Klemczak, B.; Azenha, M.; Schlicke, D.. "Experiences and analysis of the construction process of mass foundation slabs aimed at reducing the risk of early age cracks". Journal of Building Engineering 44 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85109550125&partnerID=MN8TOARS.
    10.1016/j.jobe.2021.102947
  30. Marijana Serdar; Stéphanie Staquet; Dirk Schlicke; Emmanuel Rozière; Miguel Azenha; Sree Nanukuttan; Ivan Gabrijel; et al. "Practice on creating a common reference concrete for Round Robin Testing programmes based on the experience from COST Action TU1404". Construction and Building Materials (2020): https://doi.org/10.1016/j.conbuildmat.2020.118542.
    10.1016/j.conbuildmat.2020.118542
  31. Ana Vaz Sá; Miguel Azenha; A.S. Guimarães; J.M.P.Q. Delgado. "FEM Applied to Building Physics: Modeling Solar Radiation and Heat Transfer of PCM Enhanced Test Cells". Energies 13 9 (2020): 2200-2200. https://doi.org/10.3390/en13092200.
    10.3390/en13092200
  32. Rui P. C. L. Sousa; Bárbara Ferreira; Miguel Azenha; Susana P. G. Costa; Carlos J. R. Silva; Rita B. Figueira. "PDMS Based Hybrid Sol-Gel Materials for Sensing Applications in Alkaline Environments: Synthesis and Characterization". Polymers 12 2 (2020): 371-371. https://doi.org/10.3390/polym12020371.
    10.3390/polym12020371
  33. Conceição, J.; Faria, R.; Azenha, M.; Miranda, M.. "A new method based on equivalent surfaces for simulation of the post-cooling in concrete arch dams during construction". Engineering Structures 209 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85077558633&partnerID=MN8TOARS.
    10.1016/j.engstruct.2019.109976
  34. Prakash, P.R.; Pulatsu, B.; Lourenço, P.B.; Azenha, M.; Pereira, J.M.. "A meso-scale discrete element method framework to simulate thermo-mechanical failure of concrete subjected to elevated temperatures". Engineering Fracture Mechanics 239 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090406874&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2020.107269
  35. Schlicke, D.; Tue, N.V.; Gomes, J.; Sousa, C.; Azenha, M.. "Analytical assessment of restraint forces and crack widths in end-restrained building slabs". Engineering Structures 224 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85089820868&partnerID=MN8TOARS.
    10.1016/j.engstruct.2020.111218
  36. Gomes, J.G.; Granja, J.; Sousa, C.; Zahabizadeh, B.; Faria, R.; Schlicke, D.; Azenha, M.. "A new test setup for simulation of the combined effect of bending and axial restraint in slab-like specimens". Engineering Structures 225 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090184808&partnerID=MN8TOARS.
    10.1016/j.engstruct.2020.111251
  37. Prakash, P.R.; Azenha, M.; Pereira, J.M.; Lourenço, P.B.. "Finite element based micro modelling of masonry walls subjected to fire exposure: Framework validation and structural implications". Engineering Structures 213 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082963912&partnerID=MN8TOARS.
    10.1016/j.engstruct.2020.110545
  38. Mateus Oliveira; Miguel Azenha; Paulo Lourenço. "A multi-physics modelling based on coupled diffusion equations to simulate the carbonation process". Revista IBRACON de Estruturas e Materiais 13 5 (2020): https://doi.org/10.1590/s1983-41952020000500006.
    10.1590/s1983-41952020000500006
  39. Jedrzejewska, A.; Kanavaris, F.; Zych, M.; Schlicke, D.; Azenha, M.. "Experiences on early age cracking of wall-on-slab concrete structures". Structures 27 (2020): 2520-2549. http://www.scopus.com/inward/record.url?eid=2-s2.0-85090047429&partnerID=MN8TOARS.
    10.1016/j.istruc.2020.06.013
  40. Li, Z.; Zhang, S.; Liang, X.; Granja, J.; Azenha, M.; Ye, G.. "Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers". Construction and Building Materials 263 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090137740&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2020.120985
  41. Kheradmand, M.; Azenha, M.; Vicente, R.; de Aguiar, J.L.B.. "An innovative approach for temperature control of massive concrete structures at early ages based on post-cooling: Proof of concept". Journal of Building Engineering 32 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85091946426&partnerID=MN8TOARS.
    10.1016/j.jobe.2020.101832
  42. Gomes, J.; Carvalho, R.; Sousa, C.; Granja, J.; Faria, R.; Schlicke, D.; Azenha, M.. "3D numerical simulation of the cracking behaviour of a RC one-way slab under the combined effect of thermal, shrinkage and external loads". Engineering Structures 212 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082099924&partnerID=MN8TOARS.
    10.1016/j.engstruct.2020.110493
  43. Li, Z.; Wyrzykowski, M.; Dong, H.; Granja, J.; Azenha, M.; Lura, P.; Ye, G.. "Internal curing by superabsorbent polymers in alkali-activated slag". Cement and Concrete Research 135 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85084952362&partnerID=MN8TOARS.
    10.1016/j.cemconres.2020.106123
  44. Dunant, C.F.; Granja, J.; Muller, A.; Azenha, M.; Scrivener, K.L.. "Microstructural simulation and measurement of elastic modulus evolution of hydrating cement pastes". Cement and Concrete Research 130 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079670260&partnerID=MN8TOARS.
    10.1016/j.cemconres.2020.106007
  45. Correia Lopes, G.; Vicente, R.; Ferreira, T.M.; Azenha, M.; Estêvão, J.. "Displacement-based seismic performance evaluation and vulnerability assessment of buildings: The N2 method revisited". Structures 24 (2020): 41-49. http://www.scopus.com/inward/record.url?eid=2-s2.0-85077662826&partnerID=MN8TOARS.
    10.1016/j.istruc.2019.12.028
  46. Kanavaris, Fragkoulis; Azenha, Miguel; Schlicke, Dirk; Kovler, Konstantin. "Longitudinal restraining devices for the evaluation of structural behaviour of cement-based materials: the past, present and prospective trends". (2020): http://hdl.handle.net/1822/70611.
    10.1111/str.12343
  47. Meera Ramesh; Miguel Azenha; Paulo B. Lourenço. "Quantification of impact of lime on mechanical behaviour of lime cement blended mortars for bedding joints in masonry systems". Construction and Building Materials 229 (2019): 116884-116884. https://doi.org/10.1016/j.conbuildmat.2019.116884.
    10.1016/j.conbuildmat.2019.116884
  48. Vít Šmilauer; Petr Havlásek; Tobias Gasch; Arnaud Delaplace; David E.-M. Bouhjiti; Farid Benboudjema; Matthieu Briffaut; Fragkoulis Kanavaris; Miguel Azenha. "Hygro-mechanical modeling of restrained ring test: COST TU1404 benchmark". Construction and Building Materials 229 (2019): 116543-116543. https://doi.org/10.1016/j.conbuildmat.2019.07.269.
    10.1016/j.conbuildmat.2019.07.269
  49. Mohammad Kheradmand; Romeu Vicente; Miguel Azenha; Jose L.B. de Aguiar. "Influence of the incorporation of phase change materials on temperature development in mortar at early ages: Experiments and numerical simulation". Construction and Building Materials 225 (2019): 1036-1051. https://doi.org/10.1016/j.conbuildmat.2019.08.028.
    10.1016/j.conbuildmat.2019.08.028
  50. Gonçalo Correia Lopes; Romeu Vicente; Tiago Miguel Ferreira; Miguel Azenha. "Intervened URM buildings with RC elements: typological characterisation and associated challenges". Bulletin of Earthquake Engineering (2019): https://doi.org/10.1007/s10518-019-00651-y.
    10.1007/s10518-019-00651-y
  51. Lucía Garijo; Miguel Azenha; Meera Ramesh; Paulo B. Lourenço; Gonzalo Ruiz. "Stiffness evolution of natural hydraulic lime mortars at early ages measured through EMM-ARM". Construction and Building Materials 216 (2019): 405-415. https://doi.org/10.1016/j.conbuildmat.2019.04.258.
    10.1016/j.conbuildmat.2019.04.258
  52. B. Zahabizadeh; A. Edalat-Behbahani; J. Granja; J.G. Gomes; R. Faria; M. Azenha. "A new test setup for measuring early age coefficient of thermal expansion of concrete". Cement and Concrete Composites 98 (2019): 14-28. https://doi.org/10.1016/j.cemconcomp.2019.01.014.
    10.1016/j.cemconcomp.2019.01.014
  53. Fragkoulis Kanavaris; Miguel Azenha; Marios Soutsos; Konstantin Kovler. "Assessment of behaviour and cracking susceptibility of cementitious systems under restrained conditions through ring tests: A critical review". Cement and Concrete Composites 95 (2019): 137-153. https://doi.org/10.1016/j.cemconcomp.2018.10.016.
    10.1016/j.cemconcomp.2018.10.016
  54. Mateus Antônio Nogueira Oliveira; Miguel Azenha; Paulo Barbosa Lourenço; Anna Meneghini; Erika Guimarães. "Estudo experimental do fluxo de umidade em argamassas de cal aérea". Matéria (Rio de Janeiro) 24 4 (2019): https://doi.org/10.1590/s1517-707620190004.0845.
    10.1590/s1517-707620190004.0845
  55. Figueira, R.B.; Sousa, R.; Coelho, L.; Azenha, M.; de Almeida, J.M.; Jorge, P.A.S.; Silva, C.J.R.. "Alkali-silica reaction in concrete: Mechanisms, mitigation and test methods". Construction and Building Materials 222 (2019): 903-931. http://www.scopus.com/inward/record.url?eid=2-s2.0-85069803158&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2019.07.230
  56. Ramesh, M.; Azenha, M.; Lourenço, P.B.. "Mechanical properties of lime–cement masonry mortars in their early ages". Materials and Structures/Materiaux et Constructions 52 1 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85060681095&partnerID=MN8TOARS.
    10.1617/s11527-019-1319-z
  57. Ferreira, C.; Sousa, C.; Faria, R.; Azenha, M.; Pimentel, M.. "Thermo-hygro-mechanical simulation of cracking in thick restrained RC members: Application to a 50 cm thick slab". Journal of Advanced Concrete Technology 17 8 (2019): 489-505. http://www.scopus.com/inward/record.url?eid=2-s2.0-85072329231&partnerID=MN8TOARS.
    10.3151/jact.17.489
  58. Zmij, A.; Klemczak, B.; Azenha, M.; Schlicke, D.. "Prediction of hardening temperature and thermal stresses in a sluice foundation,Przewidywanie temperatury twardnienia i naprezen termicznych w fundamencie sluzy". Cement, Wapno, Beton 2019 4 (2019): 286-295. http://www.scopus.com/inward/record.url?eid=2-s2.0-85073472006&partnerID=MN8TOARS.
    10.32047/CWB.2019.24.4.4
  59. Jacinto Silva; Miguel Azenha; A. Gomes Correia; Bertrand François. "Two-staged kinetics of moduli evolution with time of a lime treated soil under different curing temperatures". Transportation Geotechnics 17 (2018): 133-140. https://doi.org/10.1016/j.trgeo.2018.09.013.
    10.1016/j.trgeo.2018.09.013
  60. Mirian Velay-Lizancos; Isabel Martinez-Lage; Miguel Azenha; José Granja; Pablo Vazquez-Burgo. "Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and non-destructive testing at early ages". Construction and Building Materials 193 (2018): 323-331. https://doi.org/10.1016/j.conbuildmat.2018.10.209.
    10.1016/j.conbuildmat.2018.10.209
  61. Carlos Gomes; Manuel Parente; Miguel Azenha; José Carlos Lino. "An integrated framework for multi-criteria optimization of thin concrete shells at early design stages". Advanced Engineering Informatics 38 (2018): 330-342. https://doi.org/10.1016/j.aei.2018.08.003.
    10.1016/j.aei.2018.08.003
  62. Hadi Mazaheripour; Rui Faria; Guang Ye; Erik Schlangen; José Granja; Miguel Azenha. "Microstructure-Based Prediction of the Elastic Behaviour of Hydrating Cement Pastes". Applied Sciences 8 3 (2018): 442-442. https://doi.org/10.3390/app8030442.
    10.3390/app8030442
  63. Lameiras, R.; Valente, I.B.; Barros, J.A.O.; Azenha, M.; Gonçalves, C.; Xavier, J.. "Pull-out behaviour of Glass-Fibre Reinforced Polymer perforated plate connectors embedded in concrete. Part I: Experimental program". Construction and Building Materials 162 (2018): 155-169. http://www.scopus.com/inward/record.url?eid=2-s2.0-85037526018&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.12.021
  64. Jedrzejewska, A.; Benboudjema, F.; Lacarrière, L.; Azenha, M.; Schlicke, D.; Dal Pont, S.; Delaplace, A.; et al. "COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage". Construction and Building Materials 174 (2018): 173-189. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045637554&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.04.088
  65. Kheradmand, M.; Pacheco-Torgal, F.; Azenha, M.. "Thermal performance of resource-efficient geopolymeric mortars containing phase change materials". Open Construction and Building Technology Journal 12 1 (2018): 217-233. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064840270&partnerID=MN8TOARS.
    10.2174/1874836801812010217
  66. Kheradmand, M.; Azenha, M.; Castro-Gomes, J.P.; De Aguiar, J.L.B.. "Energy benefits of cement-based plaster containing hybrid phase-change material". Proceedings of Institution of Civil Engineers: Construction Materials 171 3 (2018): 117-125. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047468391&partnerID=MN8TOARS.
    10.1680/jcoma.17.00027
  67. Correia Lopes, G.; Vicente, R.; Azenha, M.; Ferreira, T.M.. "A systematic review of Prefabricated Enclosure Wall Panel Systems: Focus on technology driven for performance requirements". Sustainable Cities and Society 40 (2018): 688-703. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047397045&partnerID=MN8TOARS.
    10.1016/j.scs.2017.12.027
  68. Miguel Azenha; Luís Leitão; José L. Granja; Christoph de Sousa; Rui Faria; Joaquim A.O. Barros. "Experimental validation of a framework for hygro-mechanical simulation of self-induced stresses in concrete". Cement and Concrete Composites 80 (2017): 41-54. https://doi.org/10.1016/j.cemconcomp.2017.02.008.
    10.1016/j.cemconcomp.2017.02.008
  69. Silva, P.; Valente, T.; Azenha, M.; Sena-Cruz, J.; Barros, J.. "Viscoelastic response of an epoxy adhesive for construction since its early ages: Experiments and modelling". Composites Part B: Engineering 116 (2017): 266-277. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006168120&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.10.047
  70. Granja, J.; Azenha, M.. "Towards a robust and versatile method for monitoring E-modulus of concrete since casting: Enhancements and extensions of EMM-ARM". Strain 53 4 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85019734979&partnerID=MN8TOARS.
    10.1111/str.12232
  71. Faria, R.; Leitão, L.; Teixeira, L.; Azenha, M.; Cusson, D.. "A structural experimental technique to characterize the viscoelastic behavior of concrete under restrained deformations". Strain 53 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85005922679&partnerID=MN8TOARS.
    10.1111/str.12216
  72. Simavorian, D.; de Brito, J.; Castro, L.; Azenha, M.. "Analysis of the effect of shoring on the behaviour of reinforced concrete slabs". Construction and Building Materials 143 (2017): 473-489. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016013256&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.03.096
  73. Velay-Lizancos, M.; Azenha, M.; Martínez-Lage, I.; Vázquez-Burgo, P.. "Addition of biomass ash in concrete: Effects on E-Modulus, electrical conductivity at early ages and their correlation". Construction and Building Materials 157 (2017): 1126-1132. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030554736&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.09.179
  74. Oliveira, M.A.; Azenha, M.; Lourenço, P.B.; Meneghini, A.; Guimarães, E.T.; Castro, F.; Soares, D.. "Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar". Construction and Building Materials 148 (2017): 38-48. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019131571&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.04.120
  75. Sousa, C.; Leitão, L.; Faria, R.; Azenha, M.. "A formulation to reduce mesh dependency in FE analyses of RC structures under imposed deformations". Engineering Structures 132 (2017): 443-455. http://www.scopus.com/inward/record.url?eid=2-s2.0-84998773676&partnerID=MN8TOARS.
    10.1016/j.engstruct.2016.11.040
  76. Wyrzykowski, Mateusz; Sanahuja, Julien; Charpin, Laurent; Königsberger, Markus; Hellmich, Christian; Pichler, Bernhard; Valentini, Luca; et al. "Numerical benchmark campaign of COST Action TU1404 – microstructural modelling". (2017): http://hdl.handle.net/1822/58463.
    10.21809/rilemtechlett.2017.44
  77. Andrea Benedetti; Pedro Fernandes; José L. Granja; José Sena-Cruz; Miguel Azenha. "Influence of temperature on the curing of an epoxy adhesive and its influence on bond behaviour of NSM-CFRP systems". Composites Part B: Engineering 89 (2016): 219-229. http://dx.doi.org/10.1016/j.compositesb.2015.11.034.
    10.1016/j.compositesb.2015.11.034
  78. Delsaute, B.; Boulay, C.; Granja, J.; Carette, J.; Azenha, M.; Dumoulin, C.; Karaiskos, G.; Deraemaeker, A.; Staquet, S.. "Testing Concrete E-modulus at Very Early Ages Through Several Techniques: An Inter-laboratory Comparison". Strain (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84955620781&partnerID=MN8TOARS.
    10.1111/str.12172
  79. Kheradmand, M.; Azenha, M.; de Aguiar, J.L.B.; Castro-Gomes, J.. "Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings". Energy 94 (2016): 250-261. http://www.scopus.com/inward/record.url?eid=2-s2.0-84956853849&partnerID=MN8TOARS.
    10.1016/j.energy.2015.10.131
  80. Shafie-khah, M.; Kheradmand, M.; Javadi, S.; Azenha, M.; de Aguiar, J.L.B.; Castro-Gomes, J.; Siano, P.; Catalão, J.P.S.. "Optimal behavior of responsive residential demand considering hybrid phase change materials". Applied Energy 163 (2016): 81-92. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947066722&partnerID=MN8TOARS.
    10.1016/j.apenergy.2015.11.013
  81. Azenha, M.; Lucas, C.; Granja, J.L.; Carlos-Alves, I.; Guimarães, E.. "Glycerol resulting from biodiesel production as an admixture for cement-based materials: an experimental study". European Journal of Environmental and Civil Engineering (2016): 1-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-84965071041&partnerID=MN8TOARS.
    10.1080/19648189.2016.1177603
  82. Velay-Lizancos, M.; Martinez-Lage, I.; Azenha, M.; Vázquez-Burgo, P.. "Influence of temperature in the evolution of compressive strength and in its correlations with UPV in eco-concretes with recycled materials". Construction and Building Materials 124 (2016): 276-286. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984819448&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2016.07.104
  83. Oliveira, M.A.; Azenha, M.; Lourenço, P.B.. "Simulation of humidity fields in concrete: Experimental validation and parameter estimation". Journal of Advanced Concrete Technology 13 4 (2015): 214-229. http://www.scopus.com/inward/record.url?eid=2-s2.0-84933517967&partnerID=MN8TOARS.
    10.3151/jact.13.214
  84. Kheradmand, M.; Castro-Gomes, J.; Azenha, M.; Silva, P.D.; De Aguiar, J.L.B.; Zoorob, S.E.. "Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems". Construction and Building Materials 89 (2015): 48-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929460948&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.04.031
  85. Lameiras, R.; Barros, J.A.O.; Azenha, M.. "Influence of casting condition on the anisotropy of the fracture properties of Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC)". Cement and Concrete Composites 59 (2015): 60-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925400849&partnerID=MN8TOARS.
    10.1016/j.cemconcomp.2015.03.008
  86. Granja, J.L.; Fernandes, P.; Benedetti, A.; Azenha, M.; Sena-Cruz, J.. "Monitoring the early stiffness development in epoxy adhesives for structural strengthening". International Journal of Adhesion and Adhesives 59 (2015): 77-85. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924250460&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2015.02.005
  87. Fernandes, P.; Granja, J.L.; Benedetti, A.; Sena-Cruz, J.; Azenha, M.. "Quality control and monitoring of NSM CFRP systems: E-modulus evolution of epoxy adhesive and its relation to the pull-out force". Composites Part B: Engineering 75 (2015): 95-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922523549&partnerID=MN8TOARS.
    10.1016/j.compositesb.2015.01.021
  88. Silva, J.; Azenha, M.; Correia, A.G.; Granja, J.. "Continuous monitoring of sand-cement stiffness starting from layer compaction with a resonant frequency-based method: Issues on mould geometry and sampling". Soils and Foundations 54 1 (2014): 56-66. http://www.scopus.com/inward/record.url?eid=2-s2.0-84895927330&partnerID=MN8TOARS.
    10.1016/j.sandf.2013.12.006
  89. Azenha, M.; Lameiras, R.; de Sousa, C.; Barros, J.. "Application of air cooled pipes for reduction of early age cracking risk in a massive RC wall". Engineering Structures 62-63 (2014): 148-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894219386&partnerID=MN8TOARS.
    10.1016/j.engstruct.2014.01.018
  90. Granja, J.L.; Azenha, M.; De Sousa, C.; Faria, R.; Barros, J.. "Hygrometric assessment of internal relative humidity in concrete: Practical application issues". Journal of Advanced Concrete Technology 12 8 (2014): 250-265. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907561516&partnerID=MN8TOARS.
    10.3151/jact.12.250
  91. Kheradmand, M.; de Aguiar, J.B.; Azenha, M.. "Estimation of the specific enthalpy–temperature functions for plastering mortars containing hybrid mixes of phase change materials". International Journal of Energy and Environmental Engineering 5 1 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84907531054&partnerID=MN8TOARS.
    10.1007/s40095-014-0081-9
  92. Granja, J.L.; Azenha, M.; De Sousa, C.; Ferreira, C.. "Comparison between different experimental techniques for stiffness monitoring of cement pastes". Journal of Advanced Concrete Technology 12 2 (2014): 46-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897473266&partnerID=MN8TOARS.
    10.3151/jact.12.47
  93. Kheradmand, M.; Azenha, M.; De Aguiar, J.L.B.; Krakowiak, K.J.. "Thermal behavior of cement based plastering mortar containing hybrid microencapsulated phase change materials". Energy and Buildings 84 (2014): 526-536. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907551407&partnerID=MN8TOARS.
    10.1016/j.enbuild.2014.08.010
  94. Conceição, J.; Faria, R.; Azenha, M.; Mamede, F.; Souza, F.. "Early-age behaviour of the concrete surrounding a turbine spiral case: Monitoring and thermo-mechanical modelling". Engineering Structures 81 (2014): 327-340. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908566983&partnerID=MN8TOARS.
    10.1016/j.engstruct.2014.10.009
  95. Silva, J.; Azenha, M.; Correia, A.G.; Ferreira, C.. "Continuous stiffness assessment of cement-stabilised soils from early age". Geotechnique 63 16 (2013): 1419-1432. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892978140&partnerID=MN8TOARS.
    10.1680/geot.13.P.021
  96. Ramos, L.F.; Manning, E.; Fernandes, F.; Fangueiro, R.; Azenha, M.; Cruz, J.; Sousa, C.. "Tube-jack testing for irregular masonry walls: Prototype development and testing". NDT and E International 58 (2013): 24-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877958671&partnerID=MN8TOARS.
    10.1016/j.ndteint.2013.04.004
  97. Teixeira De Freitas, J.A.; Cuong, P.T.; Faria, R.; Azenha, M.; Teixeira de Freitas, João António; Cuong, Pham; Faria, Rui; Azenha, Miguel. "Modelling of cement hydration in concrete structures with hybrid finite elements". Finite Elements in Analysis and Design 77 1 (2013): 16-30. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885620522&partnerID=MN8TOARS.
    Publicado • 10.1016/j.finel.2013.07.008
  98. Lameiras, R.; Barros, J.; Azenha, M.; Valente, I.B.. "Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part II: Evaluation of mechanical behaviour". Composite Structures 105 (2013): 460-470. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880960252&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.06.015
  99. Lameiras, R.; Barros, J.; Valente, I.B.; Azenha, M.. "Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests". Composite Structures 105 (2013): 446-459. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880937829&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.06.022
  100. Azenha, Miguel; Ramos, Luis; Agular, Rafael; Granja, José. "Continuous monitoring of concrete E-modulus since casting based on modal identification: a case study for in-situ application". Cement and Concrete Composites 34 7 (2012): 881-890.
    Publicado • 10.1016/j.cemconcomp.2012.04.004
  101. Maia, Lino; Figueiras, Helena; Nunes, Sandra; Azenha, Miguel; Figueiras, Joaquim. "Influence of shrinkage reducing admixtures on distinct SCC mix compositions". Construction and Building Materials 35 1 (2012): 304-312.
    Publicado • 10.1016/j.conbuildmat.2012.02.033
  102. Maia, Lino; Azenha, Miguel; Geiker, Mette; Figueiras, Joaquim. "E-modulus evolution and its relation to solids formation of pastes from commercial cements". Cement and Concrete Research 34 6 (2012): 739-745.
    Publicado • 10.1016/j.cemconres.2012.03.013
  103. Maia, Lino; Azenha, Miguel; Faria, Rui; Figueiras, Joaquim; Maia, L.. "Identification of the percolation threshold in cementitious pastes by monitoring the E modulus evolution". Cement and Concrete Composites 34 6 (2012): 739-745.
    Publicado • 10.1016/j.cemconcomp.2012.03.001
  104. Vaz Sá, Ana; Azenha, Miguel; Sousa, Hipólito; Samagaio, António; Sa, Ana Vaz. "Thermal enhancement of plastering mortars with Phase Change Materials: experimental and numerical approach". Energy and Buildings 49 49 (2012): 16-27.
    Publicado • 10.1016/j.enbuild.2012.02.031
  105. Azenha, Miguel; Faria, Rui; Figueiras, Helena. "Thermography as a technique for monitoring early age temperatures of hardening concrete". Construction and Building Materials 25 11 (2011): 4233-4240.
    Publicado • 10.1016/j.conbuildmat.2011.04.065
  106. Maia, Lino; Azenha, Miguel; Faria, Rui; Figueiras, Joaquim. "Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions". Cement and Concrete Research 41 8 (2011): 799-807.
    Publicado • 10.1016/j.cemconres.2011.03.008
  107. Azenha, Miguel; Faria, Rui; Magalhães, Filipe; Ramos, Leonel; Cunha, ¿?lvaro. "Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique". Materials and Structures 45 1-2 (2011): 81-92.
    Aceite para publicação • 10.1617/s11527-011-9750-9
  108. Azenha, Miguel; Sousa, Carlos; Faria, Rui; Neves, Afonso. "Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures". Engineering Structures 33 12 (2011): 3442-3453.
    Aceite para publicação • 10.1016/j.engstruct.2011.07.008
  109. Azenha, M.; Ferreira, C; Silva, J; Gomes Correia, A; Aguilar, R; Ramos, L.. "Continuous stiffness monitoring of cemented sand through resonant frequency". American Society of Civil Engineers - Geotechnical Special (EI Indexed). Emerging Technologies for Material, Design, Rehabilitation, and Inspection of Roadway Pavements (GSP 218) 408 (2011): 1-2.
    Publicado • 10.1061/47629(408)22
  110. Azenha, Miguel; Magalhães, Filipe; Faria, Rui; Cunha, ¿?lvaro. "Measurement of concrete E-modulus evolution since casting: A novel method based on ambient vibration". Cement and Concrete Research 40 7 (2010): 1096-1105.
    Aceite para publicação • 10.1016/j.cemconres.2010.02.014
  111. Azenha, Miguel; Faria, Rui; Ferreira, Denise. "Identification of early-age concrete temperatures and strains: Monitoring and numerical simulation". Cement and Concrete Composites 31 6 (2009): 369-378.
    Publicado • 10.1016/j.cemconcomp.2009.03.004
  112. AZENHA, M; FARIA, R. "Temperatures and stresses due to cement hydration on the R/C foundation of a wind tower—A case study". Engineering Structures 30 9 (2008): 2392-2400.
    Publicado • 10.1016/j.engstruct.2008.01.018
  113. Azenha, M.; Maekawa, K.; Ishida, T.; Faria, R.. "Drying induced moisture losses from mortar to the environment. Part II: numerical implementation". Materials and Structures 40 8 (2007): 813-825.
    Publicado • 10.1617/s11527-007-9243-z
  114. Azenha, M.; Maekawa, K.; Ishida, T.; Faria, R.. "Drying induced moisture losses from mortar to the environment. Part I: experimental research". Materials and Structures 40 8 (2007): 801-811.
    Publicado • 10.1617/s11527-007-9244-y
  115. FARIA, R; AZENHA, M; FIGUEIRAS, J. "Modelling of concrete at early ages: Application to an externally restrained slab". Cement and Concrete Composites 28 6 (2006): 572-585.
    Publicado • 10.1016/j.cemconcomp.2006.02.012
  116. Azenha, M.. "Thermo-mechanical analysis of young concrete - Application to a restrained slab". Measuring, Monitoring and Modeling Concrete Properties (2006): 91-97.
    10.1007/978-1-4020-5104-3_11
Capítulo de livro
  1. Ricardo J. G. Mateus; Francisco Silva Pinto; Judith Fauth; Miguel Azenha; José Granja; Ricardo Veludo; Bruno Muniz; João Reis; Pedro Marques. "Improving Regulations for Automated Design Checking Through Decision Analysis Good Practices: A Conceptual Application to the Construction Sector". 2024.
    10.1007/978-3-031-38241-3_19
  2. Mohammad Kheradmand; Romeu Vicente; Miguel Azenha; José Luís Barroso de Aguiar. "A New Sustainable System for Piped Water Cooling of Mass Concrete Structures". 2023.
    10.1007/978-3-031-20241-4_28
  3. Filipe Finco; Andressa Oliveira; Nuno Sousa; Célia Pinto; José Granja; Miguel Azenha. "Development of a BIM Model for Facility Management with Virtual/Augmented Reality Interaction". 2023.
    10.1007/978-3-031-20241-4_15
  4. Renan Rocha Ribeiro; José Granja; Rodrigo Lameiras; Miguel Azenha. "A Cost-Effective Micro-controller Based System for EMM-ARM Tests in Cement Paste". 2023.
    10.1007/978-3-031-33211-1_36
  5. Thomas Russo; Miguel Azenha; José Granja. "Open-Source EMM-ARM Implementation for Mortars Based on Single-Board Computer". 2023.
    10.1007/978-3-031-33211-1_34
  6. Maria Laura Leonardi; Stefano Cursi; Daniel V. Oliveira; Miguel Azenha; Elena Gigliarelli. "Linked Data for the Categorization of Failures Mechanisms in Existing Unreinforced Masonry Buildings". 2023.
    10.36253/10.36253/979-12-215-0289-3.78
  7. Maria Laura Leonardi; Stefano Cursi; Daniel V. Oliveira; Miguel Azenha; Elena Gigliarelli. "Linked Data for the Categorization of Failures Mechanisms in Existing Unreinforced Masonry Buildings". 2023.
    10.36253/979-12-215-0289-3.78
  8. Gomes, J.; Carvalho, R.; Sousa, C.; Granja, J.; Faria, R.; Schlicke, D.; Azenha, M.. "3D Thermo-Hygro-Mechanical Simulation of a RC Slab Under Restrained Shrinkage and Applied Loads: Influence of the Reinforcement Ratio on Service Life Behaviour". 321-334. 2022.
    10.1007/978-3-030-76465-4_29
  9. Jeonghyun Kim; Miguel Azenha; Lukasz Sadowski. "Towards the Understanding the Role of the Mix Design Method in the Mechanical Behaviour of Recycled Aggregate Concrete at Early Ages". 2021.
    10.1007/978-3-030-76547-7_23
  10. Mayank Gupta; Igarashi Go; Jose Granja; Miguel Azenha; Tetsuya Ishida. "Effect of Expansive Additives on the Early Age Elastic Modulus Development of Cement Paste by Ambient Response Method (ARM)". 2021.
    10.1007/978-3-030-72921-9_26
  11. José Gomes; José Granja; Carlos Sousa; Cláudio Ferreira; Dirk Schlicke; Rui Faria; Miguel Azenha. "Long-Term Experimental Campaign on RC Shrinkage Cracking: Conceptualization, Planning and Experimental Procedures". 2021.
    10.1007/978-3-030-72921-9_12
  12. Cláudio Ferreira; Dirk Schlicke; Carlos Sousa; José Gomes; Rui Faria; Miguel Azenha. "Validation of Thermo-hygro-Mechanical FEM Analysis of Thick Restrained RC Members by Comparison with Experiments". 2021.
    10.1007/978-3-030-72921-9_24
  13. Kheradmand, M.; Vicente, R.; Azenha, M.; de Aguiar, J.L.B.. "Performance Requirements, Challenges and Existing Solutions of PCM in Massive Concrete for Temperature Control". 93-103. 2021.
    10.1007/978-3-030-76551-4_9
  14. Granja, J.; Azenha, M.. "Elastic Modulus Measurement Through Ambient Response Method". 69-98. 2020.
    10.1007/978-3-030-39738-8_3
  15. Ramesh, M.; Azenha, M.; Lourenço, P.B.. "Study of Early Age Stiffness Development in Lime–Cement Blended Mortars". 397-404. 2019.
    10.1007/978-3-319-99441-3_42
  16. Schlicke, D.; Kanavaris, F.; Lameiras, R.; Azenha, M.. "On-site monitoring of mass concrete". 307-355. 2019.
    10.1007/978-3-319-76617-1_9
  17. Azenha, M.; Sfikas, I.P.; Wyrzykowski, M.; Kuperman, S.; Knoppik, A.. "Temperature control". 153-179. 2019.
    10.1007/978-3-319-76617-1_6
  18. Wyrzykowski, M.; Knoppik, A.; Leal da Silva, W.R.; Lura, P.; Honorio, T.; Ballim, Y.; Delsaute, B.; Staquet, S.; Azenha, M.. "Thermal properties". 47-67. 2019.
    10.1007/978-3-319-76617-1_3
  19. Fairbairn, E.M.R.; Azenha, M.. "Introduction". 1-12. 2019.
    10.1007/978-3-319-76617-1_1
  20. Nilsson, L.; Hansen, K.; Azenha, Miguel. "Hygrometry". 2018.
    10.1007/978-3-319-74231-1
  21. Díaz-Vilariño, L.; Boguslawski, P.; Azenha, M.; Mahdjoubi, L.; Lourenço, P.B.; Arias, P.. "From LiDAR data towards HBIM for energy analysis". 2017.
    10.4324/9781315628011
  22. Kheradmand, M.; Abdollahzadeh, M.; Azenha, M.; de Aguiar, J.L.B.. "Phase Change Materials as Smart Nanomaterials for Thermal Energy Storage in Buildings". 249-293. 2016.
Livro
  1. Azenha, M.. International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures. Springer Nature Switzerland. 2023.
    Publicado • 10.1007/978-3-031-33187-9
  2. Azenha, M.. 3rd BIM A+ International Conference in Building Information Modelling. 2023.
    Publicado
  3. António Aguiar Costa; Miguel Azenha; João Poças Martins; Ricardo Pinho; Luís Ribeirinho; Marta Campos; Inês Rodrigues; Ricardo Cunha Reis. BIM nas autarquias - Guia Compreensivo para a Implementação do BIM. 2020.
  4. Azenha, M.. Advanced Techniques for Testing of Cement-Based Materials. Springer International Publishing. 2020.
    10.1007/978-3-030-39738-8
  5. Fairbairn, E.M.R.; Azenha, M.. Thermal Cracking of Massive Concrete Structures. Springer International Publishing. 2019.
    Publicado • 10.1007/978-3-319-76617-1
  6. Azenha, M.. Design of reinforced concrete structures subjected to external loads and restrained deformations.. 2019.
    Publicado • 10.5281/zenodo.3540727 • Editor
  7. Miguel Azenha; Carlos Sousa; José Granja; Rui Faria; B. Zahabizadeh; Azenha, M.; Sousa, C.; et al. Reinforcement design for the combined effect of restrained shrinkage and applied loads in slabs: a design challenge. 2019.
  8. Fairbairn, E.M.R.; Azenha, M.. Preface. 2019.
  9. Granja, J.L.; Azenha, M.. Assessing viscoelastic properties of concrete during its early ages through forced dynamic excitation of test beams. 2016.
    10.4028/www.scientific.net/KEM.711.103
  10. Matos, José C., ed. lit.; Azenha, Miguel, ed. lit.; Granja, José Luís Duarte, ed. lit.; Guimarães, Hugo, ed. lit.; Pielstick, Brett H. ed. lit.. fib Commission 5: seminar on durability of concrete structures. University of Minho. 2014.
  11. Maia, L.; Azenha, M.; Faria, R.; Figueiras, J.. Elasticity modulus monitoring through an ambient vibration response method - application to cement based pastes. 2012.
    10.1007/978-94-007-0723-8_64
Pré-impressão
  1. Francesca Noardo; Dogus Guler; Judith Fauth; Giada Malacarne; Silvia Mastrolembo Ventura; Miguel Azenha; Per-Ola Olsson; Lennart Senger. "Unveiling the Actual Progress of Digital Building Permit: Getting Awareness through a Critical State of the Art Review". 2021. https://doi.org/10.20944/preprints202110.0392.v2.
    10.20944/preprints202110.0392.v2
Relatório
  1. Azenha, Miguel Ângelo Dias. 2011. State of the Art Report - Methods to measeure moisture in Concrete.
  2. Azenha, Miguel Ângelo Dias. 2011. Use of salt solutions for assuming constant relative humidity conditions in contained enviroment.
  3. Azenha, Miguel Ângelo Dias. 2011. Evaluation of the applicability of a low-cost concrete deformation measurement system based on a USB Microscope.
  4. Azenha, Miguel Ângelo Dias. 2010. Effect of shrinkage in reinforced concrete structures methods for analysis and design.
  5. Azenha, Miguel Ângelo Dias. 2010. Optimization study for material and structural performance of tetrapods for costal protecion.
  6. Azenha, Miguel Ângelo Dias. 2010. Paradela Dam - Complementary Spillway. Study regrading construction phasing.
  7. Azenha, Miguel Ângelo Dias. 2009. Study of cracking occurred in the channel Alvito/Pisão - Final Report.
  8. Azenha, Miguel Ângelo Dias. 2009. Study of cracking occurred in the channel Alvito/Pisão - Preliminary report.
  9. Azenha, Miguel Ângelo Dias. 2009. Strengthening design for the cantilevers of the social housing blocks of campinas, Carriçal and Francos.
  10. Azenha, Miguel Ângelo Dias. 2009. Inspection and diagnoisis of the stability conditons of the cantilivers in the buildings of Campinas Social Housing-Porto - Study of the Social Housing Blocks of Campinas, Carriçal and Francos..
  11. Azenha, Miguel Ângelo Dias. 2009. Inspection and diagonsis of the stability conditions of the cantilivers in the buldings of Campinas Social Housing Porto - Causes of the collapse of the 2st floor cantilever in block 10''.
  12. Azenha, Miguel Ângelo Dias. 2009. Structural strenghthening of "Edifício Panorâmico" located in Quinta da Formiga, Barcelos 09-DEC/E-11''.
  13. Azenha, Miguel Ângelo Dias. 2008. Thermography evaluation of hardening concrete. A benchmarking example..
  14. Azenha, Miguel Ângelo Dias. 2008. Experiments for evaluation of the potential of sensores for measurement of temperatures and strains in concrete at early ages.
  15. Azenha, Miguel Ângelo Dias. 2008. Monitoring modeling of a precast concrete beam since eraly ages.
  16. Azenha, Miguel Ângelo Dias. 2008. Monitoring and modeling early age structural behavior of a concrete dam.
  17. Azenha, Miguel Ângelo Dias. 2008. modeling moisture fields in concrete since early ages. State of the art report and numerical tool description..
  18. Azenha, Miguel Ângelo Dias. 2007. Restrained ring test: Characterization of the mechanical behavior of concrete at early ages.
  19. Azenha, Miguel Ângelo Dias. 2006. Calorimetric characterization of cements during hydration.
  20. Azenha, Miguel Ângelo Dias. 2006. Mechanical characterization of concrete at early ages.
  21. Azenha, Miguel Ângelo Dias. 2006. Thermo-mechanical analysis of the R/C foundation of a wind tower: parametric analyses.
  22. Azenha, Miguel Ângelo Dias. 2006. Use of an Isothermal calorimeter in the characterization of cements.
  23. Azenha, Miguel Ângelo Dias. 2006. Thermo-mechanical analysis of the foudation of the wind tower VESTAS V90-3MW.
  24. Azenha, Miguel Ângelo Dias. 2005. Restrained Concrete Ring Testing:Experience at LABEST.
  25. Azenha, Miguel Ângelo Dias. 2005. Concrete at early ages: behavior prediction. State of the art report.
  26. Azenha, Miguel Ângelo Dias. 2005. Heat and moisture transfer between concrete and the environment.
Resumo em conferência
  1. Ponce-Farfán, C.; Santillán, D.; Toledo, M.A.; Azenha, M.. "Thermal simulation of concrete dams during construction: effect of the heat exchange mechanisms". Trabalho apresentado em Congress on Numerical Methods in Engineering, Guimarães, 2019.
  2. Gomes, J.; Carvalho, R.; Sousa, C.; Granja, J.L.; Faria, D.; Azenha, M.; Schlicke, D.. "3D Thermo-hygro-mechanical approach for simulation of the cracking behaviour of a RC slab under the combined effects of applied loads and restrained shrinkage". Trabalho apresentado em Congress on Numerical Methods in Engineering, Guimarães, 2019.
  3. Conceição, J.; Faria, R.; Azenha, M.; Miranda, M.. "Numerical study of arch dams under the construction and operation scenarios". Trabalho apresentado em Congress on Numerical Methods in Engineering, Guimarães, 2019.
  4. Ferreira, C.; Sousa, C.; Azenha, M.; Pimentel, M.; Faria, R.. "Experimental validation of constitutive models for assessment of the cracking risk at the early ages". Trabalho apresentado em Congress on Numerical Methods in Engineering, Guimarães, 2019.
  5. Soares, T.; Azenha, M.; Lourenço, P.B.. "Creep modelling for refractory materials used in furnace linings". Trabalho apresentado em Congress on Numerical Methods in Engineering, Guimarães, 2019.
  6. Prakash, P.R.; Pereira, J.M.; Azenha, M.; Lourenço, P.B.. "Finite element based micro modelling of masonry structures subjected to fire". Trabalho apresentado em Congress on Numerical Methods in Engineering, Guimarães, 2019.
Tese / Dissertação
  1. "Contribution to the revision of the Portuguese Rules of Measurement towards a standardized BIM-based industry". Mestrado, 2023. https://bimaplus.org/wp-content/uploads/2023/10/31-2023-LauraAlmeida.pdf.
  2. "AR-enhanced collaborative environment for Facility Management supported by OpenBIM". Mestrado, 2023. https://bimaplus.org/wp-content/uploads/2023/10/32-2023-LuisFelipeMoreira.pdf.
  3. "A platform based on open-BIM towards digital building permits in Portugal". Mestrado, 2023.
  4. "Laboratório BIM de realidade virtual para a Indústria da Arquitetura, Engenharia e Construção". Mestrado, 2022. https://hdl.handle.net/1822/81423.
  5. "BIM as a Smart Facility Management Tool of University Facilities". Mestrado, 2022. https://hdl.handle.net/1822/77757.
  6. "Automatização do cálculo de vigas de betão armado com auxílio de programação orientada a objetos". Mestrado, 2022. https://hdl.handle.net/1822/81302.
  7. "Appointing parties and OpenBIM in the context of ISO 19650". Mestrado, 2022. https://hdl.handle.net/1822/81302.
  8. "Integrated Planning and Recording Circularity of Construction Materials through Digital Modelling". Mestrado, 2022. https://hdl.handle.net/1822/81121.
  9. "Industrialization in building MEP instalations: modular preconstruction based on BIM". Mestrado, 2022. https://hdl.handle.net/1822/82152.
  10. "Implementation of ISO19650 based framework for asset management in logistics centres for a major food retailer". Mestrado, Universidade do Minho - Campus de Azurém, 2022. ok submetida ciencia vitae.
  11. Mutale, Lombe. "Collaborative BIM-based workflows for a new sustainable compression-only structural block construction system". Mestrado, 2021. http://hdl.handle.net/1822/76163.
  12. Mirniazmandan, Seyedeh Aida. "Proposal of a company BIM guide in alignment with ISO 19650". Mestrado, 2021. http://hdl.handle.net/1822/76167.
  13. Heleno, Aline Fernandes. "BIM for information management in structural safety control of embankment dams". Mestrado, 2021. http://hdl.handle.net/1822/76165.
  14. Aly Ahmed. "Upgrading BIM processes in a structural design office". Mestrado, 2021. http://hdl.handle.net/1822/76139.
  15. Ramesh, Meera. "A multi scale approach to the study of lime-cement mortars in masonry". Doutoramento, 2021. http://hdl.handle.net/1822/75380.
  16. Canivete, Chiamba Ricardo Chiteculo. "Análise da implementação do BIM na indústria AECO em Angola". Mestrado, 2021. http://hdl.handle.net/1822/70337.
  17. El Sibaii, Mohamad. "Towards efficient BIM use of underground geotechnical data". Mestrado, 2020. http://hdl.handle.net/1822/67181.
  18. Trabulci, Marina Bacichett. "Interoperability framework for BIM-FM based on a relational database". Mestrado, 2020. http://hdl.handle.net/1822/74841.
  19. Cardoso, Sérgio Miguel Pedroso Azenha. "Relatório do estágio feito no Serviço de Geriatria do Hospital Erasme em Bruxelas de Outubro a Dezembro de 2019". Mestrado, 2020. http://hdl.handle.net/10316/94306.
  20. Vieira, Lucas Lima. "Coordinated specification and quantity take-off through digital modelling". Mestrado, 2020. http://hdl.handle.net/1822/73292.
  21. Yasir, Muhammad. "A framework for BIM-based assessment of seismic performance of existing RC buildings". Mestrado, 2020. http://hdl.handle.net/1822/74845.
  22. Almeida, José Torcato Vaz de Matos Ribeiro de. "Textile hybrid kinetic adaptive structures: a case study". Mestrado, 2018. http://hdl.handle.net/1822/71086.
  23. Matos, Ana Paula Martins. "Metodologias ‘Building Information Modelling’ aplicadas à gestão eficiente de infraestruturas hidráulicas: um caso de estudo". Mestrado, 2018. http://hdl.handle.net/1822/70874.
  24. Silva, Jacinto João Rosário. "Continuous monitoring of deformability of stabilized soils based on modalidentification". Doutoramento, 2017. http://hdl.handle.net/1822/48601.
  25. Silva, Patrícia Moreira. "Time-dependent behaviour and durability of RC slabs strengthened with NSM CFRP strips". Doutoramento, 2017. http://hdl.handle.net/1822/48612.
  26. Sousa, Gabriel Junior de Brito. "Implementação BIM no contexto de inspeção e gestão da manutenção de obras de arte em betão armado: proposta de metodologia e aplicação piloto". Mestrado, 2017. http://hdl.handle.net/1822/70668.
  27. Carvalho, Diogo Miguel Mendes. "Desenvolvimento de um adesivo de base aquosa". Mestrado, 2016. http://hdl.handle.net/10316/32228.
  28. Lameiras, Rodrigo Melo. "Sandwich structural panels comprising thin-walled SFRSCC and GFRP connectors: from material features to structural behaviour". Doutoramento, 2016. http://hdl.handle.net/1822/43061.
  29. Kheradmand, Mohammad. "Incorporation of hybrid phase change materials in plastering mortars for increased energy efficiency in buildings". Doutoramento, 2016. http://hdl.handle.net/1822/41577.
  30. Oliveira, Mateus António Nogueira. "A multi–physics approach applied to masonry structures with non–hydraulic lime mortars". Doutoramento, 2016. http://hdl.handle.net/1822/41524.
  31. Granja, José Luís Duarte. "Continuous characterization of stiffness of cement-based materials: experimental analysis and micro-mechanics modelling". Doutoramento, 2016. http://hdl.handle.net/1822/42563.
  32. Rodrigues, João Pedro Pereira. "BIM no projeto e construção de estruturas metálicas: estabelecimento de manual de implementação e execução". Mestrado, 2016. http://hdl.handle.net/1822/49087.
  33. Lopes, José Ricardo Sousa. "Método inovador para a monitorização in-situ do endurecimento de materiais cimentícios com base na caraterização do comportamento dinâmico". Mestrado, 2016. http://hdl.handle.net/1822/49004.
  34. Soares, Marta Isabel Azevedo. "Interação entre arquiteto e engenheiro de estruturas em fases preliminares da conceção estrutural: oportunidades e desafios das metodologias BIM". Mestrado, 2015. http://hdl.handle.net/1822/40579.
  35. Araújo, Carlos Alexandre Fernandes. "Fluência no betão desde as primeiras idades: um estudo experimental". Mestrado, 2015. http://hdl.handle.net/1822/40698.
  36. Fernandes, Luís Pedro Bidarra. "An integrated model for simulation of construction phasing of arch concrete dams". Mestrado, 2015. http://hdl.handle.net/1822/40572.
  37. Marques, António Alexandre Fernandes. "Implementação de metodologias BIM na Direção de Engenharia de Barragens da EDP: casos de estudo de projeto de estruturas em obras hidroelétricas". Mestrado, 2015. http://hdl.handle.net/1822/40600.
  38. Lima, André Carvalho. "Upgrade of an industrial building: BIM model of the as-built situation and evaluation of modifications". Mestrado, 2015. http://hdl.handle.net/1822/40605.
  39. Ribeiro, Bruno. "Aplicação de metodologias BIM no contexto da construção da nova ponte sobre o Rio Dão". Mestrado, 2015. http://hdl.handle.net/1822/40638.
  40. Guimarães, Erika Tinoco. "Parametrical studies of the behavior of aerial lime mortars". Mestrado, 2014. http://hdl.handle.net/1822/36183.
  41. Azevedo, Leandro Filipe Cortez. "Ensinar estruturas através de um laboratório pedagógico". Mestrado, 2014. http://hdl.handle.net/1822/36320.
  42. Vieira, Luís Miguel Rios. "Continuous evaluation of the stiffness of stabilized soils since compaction: enhancements to the EMM-ARM methodology". Mestrado, 2014. http://hdl.handle.net/1822/36307.
  43. Morais, José Ricardo Moreira dos Santos. "Desenvolvimento de técnica de impressão 3D para produção de peças de matriz cimentícia". Mestrado, 2014. http://hdl.handle.net/1822/36263.
  44. Gomes, Carlos Alberto Ferreira. "Use of generative algorithms and shape optimization strategies in structural design". Mestrado, 2014. http://hdl.handle.net/1822/36155.
  45. Fernandes, José Pedro Machado. "A metodologia Building Information Modeling aplicada ao projeto de estruturas". Mestrado, 2013. http://hdl.handle.net/1822/30793.
  46. Alves, Inês Carlos. "Biodiesel by-product as an admixture for cement-based materials : an experimental study". Mestrado, 2013. http://hdl.handle.net/1822/30738.
  47. Silva, Andreia Daniela Maciel da. "Comportamento mecânico do betão nas primeiras idades : propriedades e monitorização de deformações". Mestrado, 2013. http://hdl.handle.net/1822/30671.
  48. Silva, Luís Miguel Freitas da. "Criação e implementação de um laboratório pedagógico de estruturas na Universidade do Minho". Mestrado, 2013. http://hdl.handle.net/1822/30808.
  49. Caires, Bruno Emanuel Araújo. "BIM as a tool to support the collaborative project between the structural engineer and the architect: BIM execution plan, education and promotional initiatives". Mestrado, 2013. http://hdl.handle.net/1822/30677.
  50. Magalhães, Nelson José Martins de. "Influência dos parâmetros da formulação na rigidez de solos estabilizados : estudo experimental". Mestrado, 2013. http://hdl.handle.net/1822/30987.
  51. Campos, Miguel Souto. "Desenvolvimento de sistemas experimentais para estudo do comportamento do betão sob condições de retração restringida". Mestrado, 2013. http://hdl.handle.net/1822/30971.
  52. Sepúlveda, João Marcelo; Azenha, Miguel; Pereira, João; Caetano Monteiro, Caetano. "Bio-inspiração aplicada a estruturas de betão : desafios e possibilidades associados às técnicas de impressão 3D". Mestrado, 2012. http://hdl.handle.net/1822/29540.
  53. Padilla Quincot, Gonzalo. "Measurement of internal moisture distribution in concrete with relative humidity sensors". Mestrado, 2012. http://hdl.handle.net/1822/29568.
  54. Silva, Pedro Daniel Moreira da. "Aplicação de técnicas BIM à construção modular com Painéis Sandwich". Mestrado, 2012. http://hdl.handle.net/1822/30309.
  55. Azenha, Miguel Ângelo Dias. "Numerical simulation of the structural behaviour of concrete since its early ages". Doutoramento, 2009. http://hdl.handle.net/10216/57587.
  56. Azenha, Miguel Ângelo Dias. "Comportamento do betão nas primeiras idades : fenomenologia e análise termo-mecânica". Mestrado, 2004. http://hdl.handle.net/10216/11977.

Propriedade Intelectual

Patente
  1. Gomes, J.C.; Kheradmand, M.; Zoorob, S.E.; Silva, P.D.; Azenha, M.; Aguiar, J.B.. 2018. "Agregados leves impregnados com materiais de mudança de fase e selagem superficial por molhagem com revestimentos à prova de água". Portugal.
    Concedida/Emitida
  2. Azenha, M.; Magalhães, F.; Ramos, L.. 2010. "Método baseado em vibrações ambientais para quantificar a evolução do módulo de elasticidade de materiais em processo de solidificação". Portugal.
    Concedida/Emitida

Outros

Outra produção
  1. Polymer and cement-based fiber-reinforced composite materials for sandwich slabs | Polymer- und zementbasierte, faserbewehrte Verbundwerkstoffe für Sandwichelemente. 2014. De Sousa, C.; Barros, J.O.; Azenha, M.; Lameiras, R.. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908419208&partnerID=MN8TOARS.
  2. Modelac¸a~o do Comportamento Po´s-Fendilhado do Beta~o sob Condic¸o~es de Retrac¸a~o Restringida. 2013. Leitão, Luís; Faria, Rui; Pimentel, Mário; Sousa, Pedro; Azenha, Miguel.
  3. Optimization of mass concrete construction phasing: Case study of the channel of a dam spillway (In Portuguese). 2012. Lameiras, Rodrigo; Azenha, Miguel; Barros, Joaquim.
  4. Experimentation and 3D Thermo-mechanical Modeling of Early-Age Concrete used in the Spiral Casing of Hydroeletric Power Plant Batalha, considering thermo-viscoelasticity with aging. 2012. Gomes, Flávio; Souza, Flávio; Azenha, Miguel; Conceição, José; Faria, Rui.
  5. Use of FEM to assess shrinkage cracking in restrained concrete structures. 2012. Leitão, Luís; Azenha, Miguel; Sousa, Carlos; Faria, Rui.
  6. Construction phasing of a dam spillway: thermo-mechanical simulation. 2012. Azenha, Miguel; Lameiras, Rodrigo; Barros, Joaquim; Costa, Ângelo.
  7. Issues on monitoring and simulating the thermo-mechanical behaviour of concrete since early ages. 2012. Azenha, Miguel; Faria, Rui.
  8. Estudo térmico nas primeiras idades do envolvimento em betão da espiral de uma turbina. 2012. Conceição, José; Faria, Rui; Azenha, Miguel; Mamede, Flávio; Souza, Flávio.
  9. Abordagem multi-física ao comportamento em serviço das estruturas de betão: monitorização dos campos internos de humidade. 2012. Azenha, Miguel; Granja, José; Sousa, Christoph; Vieira, Margarida; Barros, Joaquim; Faria, Rui.
  10. Integração da metodologia BIM na engenharia de estruturas. 2012. Lino, José Carlos; Azenha, Miguel; Lourenço, Paulo B..
  11. Aplicação de sistema baseado em baínhas de pré esforço ventiladas para redução do risco de fissuração de origem térmica do betão nas primeiras idades. 2012. Azenha, Miguel; Lameiras, Rodrigo; Costa, Ângelo; Barros, Joaquim.
  12. Análise da fendilhação em elementos de betão armado induzida por restrições a deformações impostas. 2012. Leitão, Luís; Faria, Rui; Azenha, Miguel; Sousa, Carlos.
  13. Avaliação experimental do módulo de elasticidade de materiais cimentícios desde as primeiras idades: aplicação laboratorial e in situ. 2012. Granja, José; Azenha, Miguel; Ramos, Luís; Aguilar, Rafael.
  14. Ensaio de restrição axial controlada para caraterização do betão tracionado devido à retração. 2012. Teixeira, Luís; Leitão, Luís; Faria, Rui; Azenha, Miguel.
  15. Monitorização contínua da rigidez de areia estabilizada com cimento através da frequência de ressonância. 2012. Silva, Jacinto; Azenha, Miguel; Gomes Correia, António; Ferreira, Cristiana; Aguilar, Rafael; Ramos, Luís.
  16. Nonlinear modelling of shrinkage-induced deformations on RC retaining walls. 2011. Leitão, Luís; Faria, Rui; Azenha, Miguel; Sousa, Carlos.
  17. EMM-ARM methodology for characterization of concrete hardening since early ages. 2011. Azenha, Miguel; Faria, Rui; Granja, José.
  18. Concrete cracking at early ages: Models for analysis and prediction (in Portuguese). 2011. Faria, Rui; Azenha, Miguel.
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2022 - Atual Rehabilitation of masonry aggregates of historic centers with application to structural safety: from consistent information management in BIM up to advanced supercomputing calculations
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2022 - Atual Next generation Digital Twins with fully integration of open BIM IFC and facilities management database
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2022 - Atual New experimental technique based on dynamic behaviour for assessment of viscoelastic properties of cement-based materials
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2022 - Atual Next-generation BIM-based processes for managing the monitoring of public works
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2019 - Atual “Computational strategies for masonry structures subjected to high temperatures”. PhD Candidate: Thais Soares. Research work started in 2019 at the University of Minho, under the supervision of Miguel Azenha and Paulo Lourenço.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2018 - Atual “BIM implementation and management at a large construction group: the case of dstgroup”. PhD Candidate: João Marcelo Sepúlveda. Research work started in 2018 at the University of Minho, under the supervision of Miguel Azenha.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2017 - Atual “Design of Reinforced Concrete Slabs under the Combined Effect of Restrained Shrinkage and Applied Loads”. PhD Candidate: José Guimarães Gomes. Research work started in 2017 at the University of Minho, under the supervision of Miguel Azenha, Carlos Sousa and Rui Faria.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2017 - Atual “Mitigating earthquake vulnerability of mixed URM-RC buildings at the urban scale”. PhD Candidate: Gonçalo Lopes. Research work started in 2017 at the University of Aveiro, under the supervision of Romeu Vicente and Miguel Azenha.
Coorientador
Universidade de Aveiro, Portugal
2017 - Atual “Thermo-mechanical simulation of restrained walls”. PhD Candidate: Aneta Smij. Research work started in 2017 at the Silesian University of Technology (Gliwice, Poland), under the supervision of Barbara Klemczak and Miguel Azenha.
Coorientador
2016 - Atual “A multi-scale approach to the study of the effects of adding lime to cement in masonry mortars: from the micro-scale level to the structural level”. PhD Candidate: Meera Ramesh. Research work started in 2016 at the University of Minho, under the supervision of Miguel Azenha and Paulo Lourenço.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2016 - Atual “Multi-level system for preventive conservation and management of built heritage: the HeritageCare approach for southwestern Europe”. PhD Candidate: Maria Morais. Research work started in 2016 at the University of Minho, under the supervision of Miguel Azenha and Giovanna Masciotta.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2012 - Atual “Influência da disposição das juntas de contração em barragens abóbada de betão”. PhD Candidate: José Morais da Conceição. Research work started in 2012 at the University of Porto, under the supervision of Rui Faria and Miguel Azenha.
Coorientador
Universidade do Porto Faculdade de Engenharia, Portugal
2011 - Atual “Integrating Building Information Modelling into Structural Design: Implementation, Automatic calculation services, standardization and teaching” PhD Candidate: José Carlos Lino. Research work started in 2011 at the University of Minho, under the supervision of Miguel Azenha and Paulo Lourenço.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2019 - 2023 Mitigating earthquake vulnerability of mixed URM-RC buildings at the urban scale
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2014 - 2018/07 “Thermo-hygral-mechanical approach to self-induced stresses in concrete structures” (in Portuguese). PhD Candidate: Luis Leitão. PhD Defense in July 2018 Faculty of Engineering of the University of Porto, under the supervision of Rui Faria and Miguel Azenha.
Coorientador
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 “Ensaios de carga virtual em estruturas de betão armado com base em modelo BIM” MSc candidate: José Fonseca Ferreira (Supervisors: Miguel Azenha, Nuno Mendes). University of Minho, December 2018.
Orientador
Universidade do Minho Escola de Engenharia, Portugal

Universidade do Minho Escola de Medicina, Portugal
2018 - 2018 “Metodologias ‘Building Information Modelling’ aplicadas à gestão eficiente de infraestruturas hidráulicas: um caso de estudo” MSc candidate: Ana Aula Martins Matos. Supervisors: Paulo Ramísio, Miguel Azenha) University of Minho. December 2018.
Coorientador
Universidade do Minho Escola de Engenharia, Portugal
2018 - 2018 “Guia para implementação BIM em gabinetes de projeto” MSc candidate: Paulo Hugo Pereira (Co-supervisors: M. Azenha, A.P. Assis). University of Minho, July 2018.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2018 - 2018 “Avaliação do efeito de arrefecimento do betão por evaporação superficial” MSc candidate: Sónia Soares (Co-supervisors: C. Sousa and M.Azenha). University of Porto. June 2018
Coorientador
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 “Estruturas Adaptativas de Membrana com Princípio Activo em Flexão” MSc candidate: José Trocato (Co-supervisors: L. Ramos and M. Azenha). University of Minho, May 2018.
Coorientador
Universidade do Minho Escola de Engenharia, Portugal
2013 - 2017/07 “Continuous monitoring of deformability of stabilized soils based on modal identification”. PhD Candidate: Jacinto Silva. PhD Defense in July 2017. University of Minho, under the supervision of Miguel Azenha and António Gomes Correia.
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2013 - 2017/07 “Long term behaviour and durability of reinforced concrete slabs strengthened with the NSM technique” PhD Candidate: Patrícia Silva. University of Minho. PhD Defense in July 2017. Work supervised by José Sena Cruz and Miguel Azenha.
Coorientador
Universidade do Minho Escola de Engenharia, Portugal
2017 - 2017 “Implementação BIM no contexto de inspeção e gestão da manutenção de Obras de Arte em betão armado: proposta de metodologia e aplicação piloto” MSc candidate: Gabriel Sousa (co-supervisors José Matos and Vitor Brito). Research work conducted at the University of Minho. Concluded in December 2017
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2017 - 2017 “Rumo à análise 3D pelo método dos elementos finitos do efeito combinado de ações diretas e da retração impedida em lajes de betão armado” MSc candidate: Rui Crisóstomo Carvalho (co-supervisor José Granja). Research work conducted at the University of Minho. Concluded in December 2017
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2012 - 2016/07 “Use of thin-walled high performance fibre reinforced cementitious composites (HPFRCC) in sandwich cladding panels: from microstructural features to structural behaviour”. PhD Candidate: Rodrigo Lameiras. University of Minho. PhD Defense in July 2016 Work supervised by Joaquim Barros and Miguel Azenha.
Coorientador
Universidade do Minho Escola de Engenharia, Portugal
2012 - 2016/06 “Desarrollo de nueva metodología para la estimación de propiedades mecánicas de eco-hormigones, mediante ensayos no destructivos en función de la temperatura”. PhD Candidate: Mirian Velay Lizancos. University of Coruña, Spain. Defense in June 2016. Work supervised by Isabel Martínez Lage and Miguel Azenha.
Coorientador
Universidade da Coruña, Espanha
2012 - 2016/05 “Continuous characterization of stiffness of cement-based materials: experimental analysis and micro-mechanics modeling” PhD Candidate: José Granja. University of Minho. PhD Defense in May 2016. Work supervised by Miguel Azenha
Orientador
Universidade do Minho Escola de Engenharia, Portugal
2012 - 2016/02 “Multi-physics approach to the long-term behaviour of cement and lime-based structures”. Mateus António Nogueira Oliveira. University of Minho. PhD Defense in February 2016. Work supervised by Paulo Lourenço and Miguel Azenha.
Coorientador
Universidade do Minho Escola de Engenharia, Portugal
2012 - 2016/02 “Incorporation of hybrid phase change materials in plastering mortars for increased energy efficiency in buildings” Mohammad Kheradmand. PhD Defense in February 2016. Work supervised by José Barroso Aguiar and Miguel Azenha.
Coorientador

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2019 - 2019 Co-organizer of the Seminar Design of reinforced concrete structures subjected to external loads and restrained deformations. (2019 - 2019)
Seminário (Coorganizador)
 Universidade do Porto Faculdade de Engenharia, Portugal
2018/10/24 - 2018/10/26 Chairman of SynerCrete 18. Interdisciplinary approaches for cement-based materials and structural concrete: synergizing expertise and bridging scales of space and time. 24-26 October 2018. Funchal. Portugal. (2018/10/24)
2018/05/17 - 2018/05/18 Co-organizer of the 2nd Portuguese Congress on Building Information Modelling PTBIM held on the 17th-18th May 2018 on the University of Lisbon. (2018/05/17 - 2018/05/18)
2017/09/12 - 2017/09/14 Member of the Organizing Committee of EAC2 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures EAC-02 from 12 to 14 September, 2017, in Brussels, Belgium. (2017/09/12 - 2017/09/14)
2017/05/19 - 2017/05/19 Organizer of the workshop “Design of reinforcement for RC elements under the combined effect of applied loads and restrained shrinkage”, held at ‘Ordem dos Engenheiros’, Porto. 19th May 2017. 80 participants. (2017/05/19 - 2017/05/19)
Oficina (workshop)
2016/11/24 - 2016/11/25 Chairman of the 1st Portuguese Congress on Building Information Modelling PTBIM held on the 24th-25th November 2016 on the University of Minho, Azurém Campus. (2016/11/24 - 2016/11/25)
2016/09/04 - 2016/09/07 Member of the Organizing Committee of the 3rd ICTG 2016 – International Conference on Transportation Geotechnics, Centro Cultural Vila Flor, Guimarães, Portugal, 4th-7th September, 2016. (2016/09/04 - 2016/09/07)
2016/09/04 - 2016/09/04 Co-organizer of the workshop on “Ground Improvement and soil stabilization”, within the scope of the 3rd ICTG 2016 – International Conference on Transportation Geotechnics, Azurém Campus, Guimarães, Portugal, September 4th, 2016. (2016/09/04 - 2016/09/04)
2016/08/21 - 2016/08/24 Chairman of the Conference segment on ‘Service life of cement-based materials and structures – COST TU1404’ within the scope of MSSCE2016 (Materials, Systems and Structures in Civil Engineering), Lyngby, Denmark, August 21-24, 2016. (2016/08/21 - 2016/08/24)
2016/04/27 - 2016/04/27 “BIM Aplicado à Engenharia Civil: um processo em franco desenvolvimento” Seminar held on the 27th April 2016 on the University of Minho, Azurém Campus. Support to the organization in the scope of BIMCLUB. (2016/04/27 - 2016/04/27)
2016/03/14 - 2016/03/15 Co-organizer of the 3rd Workshop of COST Action TU104 “Focus on the extended Round Robin Test RRT+ and the modelling benchmark”. The workshop took place in Hotel Panorama, Zagreb, on the 14th-15th March 2016. (2016/03/14 - 2016/03/15)
2015/11/28 - 2015/11/28 Public sessions of presentation of final assignments of the National Course in Building Information Modelling, held at the headquarters of the Association on the 28th November 2015 (Porto). (2015/11/28 - 2015/11/28)
2015/09/21 - 2015/09/23 Co-organizer of the mini-symposium MS14 “MS14: Towards the next generation of standards for service life of cement-based materials and structures - Mini-symposium of COST Action TU1404” in the scope of CONCREEP10 – Mechanics and physics of creep, shrinkage and durability of concrete and concrete structures - TU Wien, Vienna, on the 21st-23rd September 2015. (2015/09/21 - 2015/09/23)
2015/09/19 - 2015/09/20 Co-organizer of the 2nd Workshop of COST Action TU104 “Focus on modelling of cement-based materials and structures”. The workshop took place in TU Wien, Vienna, on the 19th-20th September 2015. (2015/09/19 - 2015/09/20)
2015/05/06 - 2015/05/06 Co-organizer of the workshop “Building Information Modelling in the Department of Civil Engineering of the University of Minho”. The workshop took place at UMinho, Guimarães, on the 6th May 2015. (2015/05/06 - 2015/05/06)
2015/04/16 - 2015/04/17 Co-organizer of the 1st Workshop of COST Action TU104 “Focus on experimental testing of cement-based materials”. The workshop took place in FGG, Ljubljana, on the 16th-17th April 2015. (2015/04/16 - 2015/04/17)
2015/03/17 - 2015/03/17 Co-organizer of the RILEM Workshop of TC-CMS “Cracking of massive concrete structures”. The workshop took place in ENS Cachan, Paris, on the 17th March 2015. (2015/03/17 - 2015/03/17)
2014/05/29 - 2014/05/29 “Workshop BIM – Um modo inovador de projetar“ Seminar held on the 29th May 2014 on the University of Minho, Azurém Campus. Support to the organization in the scope of BIMCLUB. (2014/05/29 - 2014/05/29)
2014/05/08 - 2014/05/08 Co-organizer of the International fib Course (Commission 5) “Durability of Concrete Structures”. The workshop took place in Guimarães, on the 8th May 2014 (2014/05/08 - 2014/05/08)
2013/10/30 - 2013/10/30 Chairman of the International Workshop “Concrete Properties and structural behaviour since early ages”. The workshop took place in Guimarães, on the 30th October 2013. (2013/10/30 - 2013/10/30)
2013/10 - 2013/10 Co-organizer of the special session “Innovation in cooling of Mass concrete”, together with Prof. Anton Schindler. Fall meeting of ACI on October 2013 in Phoenix, United States of America. (2013/10 - 2013/10)
2013/07 - 2013/07 Member of the Organizing Committee of FRPRCS11 – 11th International Research Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures. The conference took place in Guimarães, Portugal, July 2013. (2013/07 - 2013/07)
2013/05/09 - 2013/05/09 “BIM Seminar – IST: Challenges and opportunities (in Portuguese).“ Seminar held on 9th May 2013 on the Technical University of Lisbon – “Instituto Superior Técnico”. Support to the organization in the scope of BIMCLUB. Leading organizer: António Aguiar Costa. (2013/05/09 - 2013/05/09)
2013/04/16 - 2013/04/16 “Workshop of BIM Modelling in Reinforced Concrete Structures (in Portuguese).“ Seminar held on 16th April 2013 on the University of Minho, Azurém Campus. Support to the organization in the scope of BIMCLUB. (2013/04/16 - 2013/04/16)
2012/12/12 - 2012/12/12 “BIM - Building Information Modeling. Potential and challenges for Arquitecture and Engineering (in Portuguese).“ Seminar held on 12th December 2012 on the University of Minho, Azurém Campus. (2012/12/12 - 2012/12/12)
2012/09/19 - 2012/09/22 Member of the Organizing Committee of BEFIB2012 - 8th RILEM International Symposium on Fibre Reinforced Concrete: Challenges and Opportunities. The conference took place at Centro Cultural Vila Flor, Guimarães, Portugal, between 19 and 22 September 2012. (2012/09/19 - 2012/09/22)

Arbitragem científica em conferência

Nome da conferência Local da conferência
2020 - 2021 fib Symposium 2021. 14-16 June 2021. LNEC National Laboratory of Civil Engineering. Lisbon. Portugal.
2020 - 2020/09/06 Digital Concrete 2020 – 2nd RILEM International Conference on Concrete and Digital Fabrication.July 6-9 2020. Eindhoven University of Technology. Netherlands.
2020 - 2020/08/05 International Conference of the Engineering Mechanics Institute (EMI 2020-IC), American Society of Civil Engineers (ASCE). April 5-8 2020. Durham, UK.
2020 - 2020/07/17 Concreep 11+ . 15-17 July 2020. Northwestern University, Evanston Campus, USA.
2019 - 2019/12/06 SC4Life 2019 - EAI International Conference on Society with Future: Smart and Liveable Cities. December 4-6, 2019. Braga, Portugal
2019 - 2019/11/01 CIGOS2019 (Congrès International de Géotechnique - Ouvrages - Structures). Hanoi, Vietnam Oct-31 Nov -1 2019
2019 - 2019/07/04 2019 International Conference on Advances in Civil and Ecological Engineering Research (ACEER 2019) - http://www.aceerconf.org/ - 1-4 July 2019 - Taiwan
2019 - 2019/06/07 CONSEC19. 9th International Conference on Concrete under Severe Conditions – Environment & Loading. Unisinos Campus, Porto Alegre, Brazil. 5-7 June 2019.
2019 - 2019/05/04 SBE19 Conference “Resilient Built Environment for Sustainable Mediterranean Countries. Politecnico di Milano. Italy. Sept 4-5 2019.
2019 - 2019/03/22 RILEM Spring Convention and International Conference on Sustainable Materials, Systems and Structures, SMSS2019, (segment on Durability, Monitoring and Repair of Structures). Rovinj, Croatia, 18-22 March 2019.
2018 - 2018/10/26 SynerCrete 18. Interdisciplinary approaches for cement-based materials and structural concrete: synergizing expertise and bridging scales of space and time. 24-26 October 2018. Funchal. Portugal
2018 - 2018/09/12 DigtalConcrete2018. 1st RILEM International Conference on Concrete and Digital Fabrication. 10-12 September 2018, Zurich, Switzerland.
2018 - 2018/08/31 TINCE 2018. Technological Innovations in Nuclear Civil Engineering. 28-31 August 2018. Paris-Saclay. France.
2018 - 2018/08/29 4th International Conference on Service Life Design for Infrastructure. 26-29 August 2018. Delft. The Netherlands.
2018 - 2018/08 Benchmark and workshop VeRCoRs 2018. Prestressed concrete ageing and air leakage. August 2018.
2018 - 2018/05/15 EDUBIM Research Workshop. 15 May 2018, Clermont-Ferrrand, France
2017 - 2017/09/14 EAC2 Second International RILEM Conference on Early Age Cracking and Serviceability on Cement-based Materials and Structures. 12-14 September 2017, Belgium. Co-Chair of the Scientific Committee.

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2013 - 2013 Invited by the Federal University of Ceará (Brazil) laboratory as a visiting researcher in Fortaleza during 1 week in May 2013. This period as visiting researcher corresponds to the continuity of an international collaboration in the scope of monitoring and numerical simulation of concrete structural behaviour at early ages in dams (started in 2011 with ELETROBRAS-FURNAS).
2012/08/27 - 2012/08/31 Invited by the Concrete Laboratory of the University of Tokyo (headed by Prof. Koichi Maekawa) as a visiting researcher in Tokyo during 1 week in August 2012 (27th-31st). This period as visiting researcher allowed the consolidation of the research interchange relationship between Portugal and Japan, particularly in the scope of the numerical simulation of concrete behaviour, as well as experimental techniques for characterization.
2011 - 2011 Invited by the Brazilian Company ELETROBRAS-FURNAS (one of the major electric suppliers in Brazil) to join their concrete laboratory as a visiting researcher in Goiânia during 1 week in August 2011. This period as visiting researcher allowed establishing grounds for an international collaboration in the scope of monitoring and numerical simulation of concrete structural behaviour at early ages in dams and concrete wind towers.

Membro de associação

Nome da associação Tipo de participação
2010/01 - Atual RILEM
2004/01 - Atual ACI - American Concrete Institute
2001/01 - Atual Federation Internationale du Beton FIB
2000/07 - Atual Ordem dos Engenheiros

Membro de comissão

Descrição da atividade
Tipo de participação 		Instituição / Organização
2014 - Atual Member of IPQ Committee CT197 “Building Information Modelling”
2013 - Atual Member of ACI Committee 131 “Building Information Modeling for Concrete Structures”
2013 - Atual Member of RILEM Technical Committee TC-CMS on ”Thermal cracking of massive concrete structures” since its creation in 2013 (Secretary of the Committee)
2012 - Atual Representative of the University of Minho in the workgroup for “Dam” in the scope of the Portuguese Technological Platform for Construction
2012 - Atual Member of RILEM Technical Committee TC-MMB on ”Methods of measuring moisture in building materials and structures”
2011 - Atual Member of the academic committee of BIMFORUM Portugal, aimed to establishing grounds for the systematic application of “Building Information Modelling” technologies in the teaching curricula (of Civil Engineering) and construction market in Portugal.
2010 - Atual Member of RILEM Technical Committee MCT “Multi-component transport and chemical equilibrium in cement based materials”
2009 - Atual Member of ACI Committee 231 “Properties of Concrete at Early Ages”
Distinções

Prémio

2020 Best MSc Dissertation in Engineering in the 3rd Portuguese Congress on BIM, awarded to José Ferreira for the thesis entitled “ Ensaios virtuais à rotura em estruturas de betão armado com base em modelos BIM”. Thesis supervised by M. Azenha
2016 Outstanding paper “• Energy saving potential of cement based mortar containing hybrid phase change materials applied in building envelopes”. Authors: M. Kheradmand, M. Azenha, J. Castro-Gomes, J. Aguiar.
Organizing Committee of the Fourth International Conference on Sustainable Construction Materials and Technologies (Las Vegas, August 2016), Estados Unidos
2016 Best MSc Dissertation (as supervisor) PTBIM in the 1st Portuguese Congress on BIM, awarded to António Alexandre Marques for the thesis entitled “Implementação de metodologias BIM na Direção de Engenharia de Barragens da EDP" by Alexandre Marques
PTBIM Organising Committee - Guimarães 2016, Portugal
2015 JCI Award 2015
Japanese Concrete Institute, Japão
2014 Tekla BIM Campus award to the BIM Model of the “Bridge over River Dão” (Award attributed to Bruno Ribeiro, with the model made under the supervision of Miguel Azenha).
Tekla Software - Construsoft, Portugal
2014 1st Prize – Best Poster Award with the poster “CutInDur – Long-term structural and durability performance of concrete elements strengthened with the NSM technique”
COST Action TU1207, Bélgica
2014 Outsanding paper in Journal of Advanced Concrete Technology for the paper "Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues"
Japanese Concrete Institute, Japão
2013 Best Poster Award in the International Conference FRPRCS-11
FRPRCS-11 - Organizing Commitee - Conference Guimarães, Portugal
2013 Supervisor of the 1st classified team in the Competition for the prediction of the behaviour of a CFRP strengthened reinforced concrete beam in the scope of the FRPRCS-11
FRPRCS-11 - Organizing Commitee - Conference Guimarães, Portugal
2012 2nd Prize – Best Poster Award in the National Conference on Structural Concrete held in Porto
University of Porto - Betão Estrutural 2012, Portugal
2008 2nd Prize in the Young Researchers Session (in regard to a presentation related to the PhD work “Numerical simulation of concrete structural behaviour since early ages”)
International Conference CCC2008 – Challenges for Civil Construction (FEUP), Portugal
2008 1st Prize – Best Poster Award - “Influence of temperature and moisture fields in the service life behavior of a concrete slab.”
Betão Estrutural 2008, Portugal
2000 Prémio Engenheiro António de Almeida
Fundação Engenheiro António de Almeida, Portugal

Outra distinção

2008 2º lugar - Young Resarchers Session - International Conference CCC2008 – Challenges for Civil Construction
International Conference CCC2008 – Challenges for Civil Construction (FEUP), Portugal
2008 Melhor Poster - Betão Estrutural 2008
GPBE, Portugal
2000 Prémio Engº António Almeida atribuido ao melhor aluno de Engª Civil (FEUP) - ex-aequo
Fundação Engº António Almeida, Portugal