???global.info.a_carregar???
Hélder David Silva Craveiro. Completed the PhD in Fire Safety Engineering (Doutoramento em Engenharia de Segurança ao Incêndio) in 2016/01/13 at the University of Coimbra, Faculty of Sciences and Technology and Integrated Master in Civil Engineering in 2011 also at University de Coimbra. Since 2016 he is working as a Researcher at the University of Coimbra. In 2020, was funded by the Portuguese Foundation for Science and Technology in the scope 3rd Edition of the Individual Call to Scientific Employment Stimulus (2020.03588.CEECIND). Published 40 articles in journals. Has 1 section(s) of books. Organized 8 event(s) for dissemination and transfer of knowledge. He was a Guest Editor of two Special Issues, one in the Journal MATERIALS and the other in the Journal Applied Sciences. Currently, he is the Supervisor and co/supervisor of 4 PhD thesis(es), all directly funded by FCT in the last 2021 call for PhD Research Studentships. Supervised, co-supervised 16 MSc dissertations (14 completed; 2 ongoing). He was/is the Principal Investigator of two national research projects INNOCFSCONC - Innovative Hybrid Structural Solutions using Cold-Formed Steel and Lightweight Concrete, with reference PTDC/ECI-EGC/31858/2017 and WUIFireSafer - Safety Enhancement and Resilience of Wildland-Urban Interface Areas against Fire, with reference PCIF/AGT/0062/2018. The total funding obtained was 529.806,85 ¿. Has participated in several other national and European research projects, namely the RFCS project INNO3DJOINTS (GA: 749959) and several national projects such as EVACUAR FLORESTA (PCIF/AGT/0061/2019) and NANOFIRE (PTDC/ECI-EGC/31850/2017). He is also the PI of the reserach project D_INNOCFSCONC and "Modelling fire spread from forest to the built environment at the Wildland-Urban Interface (WUI) using Fire Dynamics Simulator" with reference 2022.15641.CPCA.A1. In parallel, he has been lecturing at the University of Coimbra in the Master and Doctoral Programme in Steel and Composite Construction as a part-time Invited Lecturer in the second semester of the academic year 2015/2016, in the academic year 2017/2018 and in the first semester of the academic year of 2018/2019. In February 2019 he lectured Design of Steel Structures II, in the scope of the Bachelor course of Construction Engineering at the Hame University of Applied Sciences in Finland. Works in the area(s) of Engineering and Technology with an emphasis on Civil Engineering. He also cooperates in the reviewing process for Thin-Walled Structures, Engineering Structures, Journal of Constructional Steel Research and Advances in Structural Engineering. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are cold-formed steel; lightweight concrete; fire; hybrid structures; plug-and-play joints; steel structures; structural stability; plug-and-play joints; fire; modular construction; prefabrication; industrialization; sustainability; circular economy; design for disassembly and reuse. As part of his intervention in the scientific community and involvement with the industry, he has participated as a member of the organizing committee of some scientific and transfer of knowledge events, all of which are closely related to the topic of Fire Safety Engineering and behaviour of cold-formed steel and composite structures at both ambient temperature and fire conditions. Simultaneously, he has cooperated regularly in consultancy works, research and development and transfer of knowledge in the framework of the research unit ISISE and the fire laboratory of the University of Coimbra, FireLab_UC. It is worth mentioning the consultancy/research works in partnership with ARCELORMITTAL and CERN, where he has coordinated and executed the established work plans. Recently he joined the ECCS/Technical Committee 11, Working Group 6 on Steel-timber composite structures, devoted to the topic of structural fire design Fire (Item 8).
Identificação

Identificação pessoal

Nome completo
Hélder David Silva Craveiro

Nomes de citação

  • Craveiro, Hélder D.

Identificadores de autor

Ciência ID
C81A-F480-5925
ORCID iD
0000-0001-8590-5885

Endereços de correio eletrónico

  • heldercraveiro.eng@uc.pt (Profissional)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Civil

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Francês Utilizador elementar (A1) Utilizador independente (B1) Utilizador elementar (A1) Utilizador elementar (A1)
Formação
Grau Classificação
2012/09/15 - 2016/01/13
Concluído
PhD in Fire Safety Engineering (Doutoramento em Engenharia de Segurança ao Incêndio) (Doutoramento)
Especialização em Civil Engineering, Structural fire engineering in the field of steel and composite structures
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Fire Resistance of Cold-Formed Steel Columns" (TESE/DISSERTAÇÃO)
18/20 (Curricular part), Magna Cum Laude Approval
2002 - 2011
Concluído
Integrated Master in Civil Engineering (Mestrado Integrado em Engenharia Civil) (Mestrado)
Especialização em Civil Engineering in the field of Structural Mechanics
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Structural behavior of composite slabs with transversal reinforcement (in Portuguese)" (TESE/DISSERTAÇÃO)
12/20 (curricular part), 17/20 (Dissertation)
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento
Empregador
2021/06/01 - 2027/05/31 Investigador Contratado (Investigação) Universidade de Coimbra, Portugal
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
(...)
2019/01/18 - 2021/05/31 Investigador (Investigação) Universidade de Coimbra, Portugal
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2017/06/01 - 2018/05/31 Pós-doutorado (Investigação) Universidade de Coimbra, Portugal
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2016/05/01 - 2017/05/02 Pós-doutorado (Investigação) Universidade de Coimbra, Portugal
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2012/07/01 - 2015/07/31 Investigador Contratado (Investigação) Universidade de Coimbra, Portugal
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2019/02/01 - 2019/02/25 Professor Visitante (Docente Universitário) Hame University of Applied Sciences - HAMK, Finlândia
Hame University of Applied Sciences - HAMK, Finlândia
2018/09/15 - 2019/01/17 Professor Auxiliar Convidado (Docente Universitário) Universidade de Coimbra, Portugal
Universidade de Coimbra, Portugal
2017 - 2019 Professor Auxiliar Convidado (Docente Universitário) Universidade de Coimbra, Portugal
2017/09/01 - 2018/08/31 Professor Auxiliar Convidado (Docente Universitário) Universidade de Coimbra, Portugal
Universidade de Coimbra, Portugal
2016/03/01 - 2016/08/01 Professor Auxiliar Convidado (Docente Universitário) Universidade de Coimbra, Portugal
Universidade de Coimbra, Portugal
Projetos

Bolsa

Designação Financiadores
2022/10/01 - 2023/09/30 D_INNOCFSCONC - Demonstração de Solução Estrutural Híbrida Inovadora com Recurso a Aço-Enformado a Frio e Betão Leve
Investigador responsável
Universidade de Coimbra, Portugal
Autoridade de Gestão do Programa Operacional Competitividade e Internacionalização
Em curso
2012/03 - 2015/07 FIRE_COLDFSTEEL - Experimental and Numerical Analysis of Cold Formed Steel Elements Subjected to Fire Fundação para a Ciência e a Tecnologia
2008/03 - 2011/02 FIRECOLUMN-Fire Resistance of Steel and Composite Steel and Concrete Columns with Restrained Thermal Elongation Fundação para a Ciência e a Tecnologia
2008/03 - 2011/02 FIRECOLUMN-Fire Resistance of Steel and Composite Steel and Concrete Columns with Restrained Thermal Elongation
Provided by PTCRIS: 65696PRJ
Fundação para a Ciência e a Tecnologia

Projeto

Designação Financiadores
2021/03/01 - 2024/02/29 Evacuation decisions and plans in wildfire scenarios
PCIF/AGT/0061/2019
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal

Universidade de Coimbra, Portugal

SerQ Centro de Inovação e Competências da Floresta, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2023/01/16 - 2023/07/15 Modelling fire spread from forest to the built environment at the Wildland-Urban Interface (WUI) using Fire Dynamics Simulator
Investigador responsável
Universidade de Coimbra, Portugal

Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/01/01 - 2022/12/31 Safety Enhancement and Resilience of Wildland-Urban Interface Areas Against Fire - INTERFACESEGURA
PCIF/AGT/0062/2018
Investigador responsável
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/07/21 - 2022/07/25 Innovative hybrid structural solutions using cold-formed steel and lightweight concrete - INNOCFSCONC
POCI-01-0145-FEDER-031858
Investigador responsável
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2017/07/01 - 2020/06/30 Innovative 3D joints for robust and economic hybrid tubular construction - INNO3DJOINTS
RFCS-2016/RFCS-2016 - Grant agreement No: 749959.
Investigador
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
European Commission
Concluído
2018/07/21 - 2019/08/31 INNOvative 3D JOINTS for robust and economic hybrid tubular construction - INNO3DJOINTS
POCI-01-0145-FEDER-031834
Investigador
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/07/21 - 2019/08/31 NANOFIRE – Thermal and mechanical behaviour of nano cements and their application in steel construction as fire protection
POCI-01-0145-FEDER-031850
Investigador
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/07/21 - 2019/07/29 Friction 4.0 – Modelação e controlo do calor gerado por fricção
PTDC/EME-APL/32089/2017
Investigador
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/06/01 - 2019/06/30 CentroAdapt – Centro de vanguarda em adaptações à alterações climáticas
CENTRO–01–0246–FEDER-0000014
Investigador
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
CENTRO 2020
Concluído
2018/06 - 2019/06 CentroAdapt ¿ Centro de vanguarda em adaptações à alterações climáticas
CENTRO010246FEDER-0000014
CENTRO 2020
2017/05/06 - 2019/01/16 SUSpENsE - Sustainable built environment under natural hazards and extreme events
CENTRO-45-2015-1
Bolseiro de Pós-Doutoramento
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
CENTRO 2020
Em curso
2014/01/01 - 2015/07/31 FRISCC – Fire Resistance of Innovative and Slender Concrete Filled Tubular Composite Columns
RFSR-CT-2012-00025
Investigador
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
European Commission
Concluído
2012/07/01 - 2015/07/31 FIRE_COLDFSTEEL – Experimental and Numerical Analysis of Cold-Formed Steel Elements Subjected to Fire
PTDC/ECM/116859/2010
Bolseiro de Investigação
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2009/06/01 - 2009/12/31 FIRECOLUMN – Resistência ao Fogo de Pilares de Aço e Betão com Dilatação Térmica Restringida
FCOMP – 01-0124 – FEDER – 007187
Bolseiro de Iniciação Científica
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2009/06 - 2009/12 FIRECOLUMN ¿ Resistência ao Fogo de Pilares de Aço e Betão com Dilatação Térmica Restringida
FCOMP 01-0124 FEDER 007187
Fundação para a Ciência e a Tecnologia
Produções

Publicações

Artigo em conferência
  1. Craveiro, Hélder; CESARE G. FIORINI ; Santiago, Aldina; Laím, Luís. "Assessing the impact of wildfires in the built environment through full-scale testing and numerical modelling". Trabalho apresentado em SFPE23 Annual Conference & Expo, Washington DC, Bethesda, 2023.
    Aceite para publicação
  2. Craveiro, Hélder; Rahnavard, Rohola; Santiago, Aldina; Laím, Luís; Rui António Duarte Simões. Autor correspondente: Craveiro, Hélder. "Structural Behaviour of Built-up Battened Cold-Formed Steel Columns". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  3. Craveiro, Hélder D.; Rahnavard, Rohola; Santiago, Aldina; Laím, Luís; Rui António Duarte Simões. "Closed built-up cold-formed steel columns under compression". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  4. Rahnavard, Rohola; Craveiro, Hélder; Rui A. Simões. "New fire ressitance design approach for concrete-filled cold-formed steel (CF-CFS) built-up composite columns". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  5. Milovanovic, Nemanja; Rui A. Simões; Tankova, Trayana; Luis Carlos Silva; Craveiro, Hélder; Ricardo Costa; Silva, Luis Alberto Proença Simões da. "Novel hybrid modular construction system-structural behaviour of isolated sub-frames". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  6. Santiago, Aldina; Pasquale Crescenzo; Craveiro, Hélder; Latour, Massimo; Dulce Rodrigues; Carlos Leitão. "Mechanical properties of S355 butt welds at elevated temperatures". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  7. Santos, Ana Francisca; Santiago, Aldina; Craveiro, Hélder; Silva, Luis Alberto Proença Simões da . Autor correspondente: Santos, Ana Francisca. "Finite element study on the behaviour of free from damage connections under fire". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  8. Silva, Luis Alberto Proença Simões da ; Craveiro, Hélder; Rui Simões; Cláudio Martins; Conde, Jorge. "Large beam-to-column steel joint for the Dune Neutrino Experiment: experimentla and numerical insights". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  9. Rahnavard, Rohola; Craveiro, Hélder; Rui Simões. "Flexural resistance of cold-formed steel-lightweight concrete (CFS-LWC) composite beam". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  10. Rui Matos; Miguel Candeias; Craveiro, Hélder. "Estimation of maximum admissible precambering of steel beams". Trabalho apresentado em Eurosteel 2023, Amsterdam, 2023.
    Aceite para publicação
  11. CESARE G. FIORINI ; Craveiro, Hélder; Santiago, Aldina. "Avaliação paramétrica dos mecanismos de transferência de calor num cenário de incêndio na interface urbano-florestal". Trabalho apresentado em 8as Jornadas de Segurança aos Incêndios Urbanos e 3as Jornadas de Proteção Civil, Porto, 2023.
    Aceite para publicação
  12. Craveiro, Hélder; CESARE G. FIORINI ; Tesch, Luana; Santiago, Aldina; Laím, Luís. "Definition of a holistic regulatory framework for enhancing safety and resilience of the built environment in the wildland-urban interface". Trabalho apresentado em VI International Congress on Risks, Coimbra, 2023.
    Aceite para publicação
  13. Tesch, Luana; Craveiro, Hélder; Gervásio, Helena; Santiago, Aldina. "Wildfire impact of central Portugal's built environment considering climate change influence". Trabalho apresentado em VI International Congress on Risks, Coimbra, 2023.
  14. CESARE G. FIORINI ; Craveiro, Hélder; Santiago, Aldina; Laím, Luís. "Wildfire spread simulation of an experimental shrub fire attacking steel sanwich panels". Trabalho apresentado em VI International Congress on Risks, Coimbra, 2023.
  15. Rahnavard, Rohola; Craveiro, Hélder; Rui Simões. "Analytical prediction of the axial capacity of concrete-filled cold-formed steel (CF-CFS) built-up columns". Trabalho apresentado em Annual Stability Conference Structural Stability Research Council, Charlotte, North Carolina, 2023.
    Publicado
  16. Craveiro, Hélder; Rahnavard, Rohola; Laím, Luís; Aldina Maria da Cruz Santiago. "Fire Performance of Built-Up Cold-Formed Steel Columns". Trabalho apresentado em 12th International Conference on Structures in Fire - 12th SiF, Hong Kong, 2022.
    Publicado
  17. Rahnavard, Rohola; Craveiro, Hélder; Rui António Duarte Simões. Autor correspondente: Rahnavard, Rohola. "Design of cold-formed steel battened built-up columns". Trabalho apresentado em Design of cold-formed steel battened built-up columns, 2022.
    Publicado
  18. Rahnavard, Rohola; Craveiro, Hélder; Rui António Duarte Simões. "An innovative concrete-filled cold-formed steel (CF-CFS) built-up columns". Trabalho apresentado em An innovative concrete-filled cold-formed steel (CF-CFS) built-up columns, 2022.
    Publicado
  19. Milovanovic, Nemanja; Tankova, Trayana; Rui Simões; Costa, Ricardo; Silva, Luis Alberto Proença Simões da. "INNO3DJOINTS MODULAR CONSTRUCTION SYSTEM - EXPERIMENTAL BEHAVIOUR". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, Coimbra, 2021.
    Publicado
  20. Silva, Luís Carlos; Tankova, Trayana; Craveiro, Hélder; Rui A. Simões; Costa, Ricardo; Silva, Luis Alberto Proença Simões da. "AVALIAÇÃO DO COMPORTAMENTO EXPERIMENTAL E NUMÉRICO DE UMA LIGAÇÃO INOVADORA HÍBRIDA “PLUG-AND-PLAY” PARA APLICAÇÕES MODULARES". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, 2021.
  21. Silva, Luís Carlos; Craveiro, Hélder David; Tankova, Trayana; Simões, Rui; Costa, Ricardo; D'Aniello, Mario; Landolfo, Raffaele; Simões da Silva, Luís. "HYBRID COLD-FORMED/TUBULAR MODULAR STRUCTURAL SYSTEM WITH INNOVATIVE JOINTS". 2021.
    10.7712/120121.8578.19416
  22. Craveiro, Hélder; Rahnavard, Rohola; Laím, Luís; Santiago, Aldina. "Behaviour of innovative concrete-filled built-up cold-formed steel columns in fire". Trabalho apresentado em ASFE’ 21 - Applications of Structural Fire Engineering 2021, Ljubljana, 2021.
  23. CESARE G. FIORINI ; Craveiro, Hélder; Silva, Luis Alberto Proença Simões da ; Santiago, Aldina; Laím, Luís. "WUIFIRESAFE – structural fire resistance of buildings in the wildland-urban interface". Trabalho apresentado em ASFE 21 - Applications of Structural Fire Engineering 2021, Ljubljana, 2021.
  24. Laím, Luís; Santiago, Aldina; Caetano, Hugo.; Craveiro, Hélder; Shahbazian, A.. "Resistência ao fogo de colunas em aço – espessura ótima de argamassas de revestimento". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, Coimbra, 2021.
  25. Rahnavard, Rohola; Craveiro, Hélder; Marco Lopes; Rui António Duarte Simões; Laím, Luís. "Análise de colunas mistas inovadoras constituídas por secções compostas fechadas de aço enformado a frio preenchidas por betão leve". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, Coimbra, 2021.
  26. Rahnavard, Rohola; Craveiro, Hélder; Simões, R.; Laím, Luís; Santiago, Aldina. "Comportamento ao fogo de colunas mistas constituídas por secções fechadas de aço enformado a frio preenchidas por betão". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, Coimbra, 2021.
  27. Craveiro, Hélder; Rahnavard, Rohola; Araújo, Miguel; Simões, R.; Laím, Luís. "Comportamento estrutural de colunas de aço enformado a frio compostas e ligadas por travessas à compressão". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, Coimbra, 2021.
    Publicado
  28. CESARE G. FIORINI ; Craveiro, Hélder; Silva, Luis Alberto Proença Simões da ; Santiago, Aldina; Laím, Luís. "Análise com base no desempenho do comportamento de edifícios industriais sujeitos à ação de incêndios na interface urbano florestal". Trabalho apresentado em XIII CMM - XIII Congresso de Construção Metálica e Mista, Coimbra, 2021.
  29. Craveiro, Hélder D.; Silva, Luis Alberto Proença Simões da ; Martins, Cláudio; Simões, Rui A.. "Avaliação experimental de ligações metálicas de grandes dimensões para o laboratório LBNF". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  30. Lopes Tiago; Craveiro, Hélder D.; Matos, Rui; Zanon, Riccardo. "Avaliação do comportamento estrutural de perfis metálicos com contra-flecha aplicados em filler beam bridges". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  31. Laím, Luís; Craveiro, Hélder D.; Pascual, Ana A; Santiago, Aldina. "Dimensionamento ao fogo de elementos com secção em C em aço enformado a frio". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  32. Pimentel, Ricardo; Craveiro, Hélder D.; Simões, Rui A. "Fire design of composite beams: discussion about current European recommendations". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  33. Luis Carlos Silva; Craveiro, Hélder D.; Tankova, Trayana; Simões, Rui A.; Silva, Luis Alberto Proença Simões da ; Costa, Ricardo. "Ligações plug-and-play para construção modular: caraterização de componentes". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  34. Luís Carlos Silva; Tankova, Trayana; Craveiro, Hélder D.; Simões, Rui A.; Silva, Luis Alberto Proença Simões da ; Costa, Ricardo. "Sistema de construção modular híbrido com ligações inovadoras". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  35. Laím, Luís; Pascual, Ana M; Craveiro, Hélder D.; Simões, Rui A.; Santiago, Aldina. "Structural analysis of innovative cold-formed steel columns". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  36. Craveiro, Hélder D.; Laím, Luís; Hima, Nikolin; Gouveia, José A.; Santiago, Aldina. "Structural behaviour of composite cold-formed steel columns under fire conditions". Trabalho apresentado em XII Congresso em Construção Metálica e Mista, Coimbra, 2019.
    Publicado
  37. Craveiro, H.D.; Henriques, J.; Silva, L.S.; Martins, J.P.. "FE analysis of the buckling behaviour of thin-walled CFS columns. Part II - Monosymmetric (R) and double symmetric built-up box cross-sections". 2019.
  38. Craveiro, H.D.; Da Silva, L.S.; Martins, J.P.; Henriques, J.; Craveiro, Hélder D.; José Alexandre Henriques; Silva, Luis Alberto Proença Simões da ; et al. "FEM analysis of the buckling behavior of thin-walled CFS columns. Part I - Channel (C) and double channel (I) cross-sections". Trabalho apresentado em International Colloquium on Stability and Ductility of Steel Structures, Praga, 2019.
    Publicado
  39. Craveiro, H.D.; Henriques, J.; Santiago, A.; Laím, L.. "Numerical investigation on thin-walled CFS columns in fire". 2019.
  40. Craveiro, Hélder D.; José Alexandre Henriques; Silva, Luis Alberto Proença Simões da ; Hervé Degée. "Innovative composite columns comprising thin-walled cold-formed profiles and concrete". Trabalho apresentado em International Conference on Thin-Walled Structures (ICTWS 2018), Lisboa, 2018.
    Publicado
  41. Szymkuc Wojciech; A. Glema; Piotr Toklowicz; Craveiro, Hélder D.. "Study on the use of ultra-lightweight cement composite for enhancing fire performance of concrete-filled tubular columns". Trabalho apresentado em The 10th International Conference on Structures in Fire, Belfast, 2017.
    Publicado
  42. Craveiro, Hélder D.; Ribeiro, João; Breda, Ricardo. "Análise de encurvadura de colunas constituídas por perfis de aço enformado a frio". Trabalho apresentado em XI Congresso de Construção Metálica e Mista, Coimbra, 2017.
    Publicado
  43. Craveiro, Hélder D.; Ribeiro, Tiago; Martins, João Pedro. "Momentos Flectores Críticos – Uma Comparação de Métodos Analíticos e Numéricos Simples com Análises Lineares de Estabilidade usando o MEF". Trabalho apresentado em XI Congresso de Construção Metálica e Mista, Coimbra, 2017.
    Publicado
  44. Simões, Rui A.; Pereira, Miguel; Fernandes, Helder; Craveiro, Hélder D.; Santiago, Aldina. "Desenvolvimento de um novo perfil Omega em aço enformado a frio". Trabalho apresentado em XI Congresso de Construção Metálica e Mista, Coimbra, 2017.
    Publicado
  45. Craveiro, Hélder D.; João Paulo Correia Rodrigues; Luís Miguel dos Santos Laím. "Experimental and numerical analysis of cold-formed steel columns at both ambient temperature and simulated fire conditions.". Trabalho apresentado em Structures in Fire SiF’16, Nova Jérsei, 2016.
    Publicado
  46. Luís Miguel dos Santos Laím; João Paulo Correia Rodrigues; Craveiro, Hélder D.; Beatriz Ferrer. "Análise experimental da resposta estrutural ao fogo de vigas em aço enformado a frio com reforços longitudinais na alma e nos banzos". Trabalho apresentado em Congresso Ibero-Latino-Americano em Segurança contra Incêndios (3º CILASCI), Porto Alegre, 2015.
    Publicado
  47. Craveiro, Hélder D.; João Paulo Correia Rodrigues. "Built-up cold-formed steel columns with restrained thermal elongation subjected to fire". Trabalho apresentado em PROTECT 2015 – Fifth International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading, 2015.
    Publicado
  48. Craveiro, Hélder D.; João Paulo Correia Rodrigues; Luís Miguel dos Santos Laím. "Parametric study on cold-formed steel columns made with open cross-section subjected to fire". Trabalho apresentado em IFireSS – International Fire Safety Symposium 2015, Coimbra, 2015.
  49. Craveiro, Hélder D.; João Paulo Correia Rodrigues; Luís Miguel dos Santos Laím. "Experimental investigation on the behaviour of cold-formed steel columns made with open cross-section subjected to fire". Trabalho apresentado em IFireSS – International Fire Safety Symposium 2015, Coimbra, 2015.
  50. Luís Miguel dos Santos Laím; João Paulo Correia Rodrigues; Craveiro, Hélder D.. "The accuracy of available analytical models for fire design of cold-formed steel open flexural members". Trabalho apresentado em IFireSS - International Fire Safety Symposium 2015, Coimbra, 2015.
    Publicado
  51. Craveiro, Hélder D.; Rodrigues, João Paulo; Laím, Luís. "Análise de encurvadura de colunas de aço enformado a frio à temperatura ambiente e elevada". Trabalho apresentado em X Congresso de Construção Metálica e Mista, 2015.
    Publicado
  52. Laím, Luís; Rodrigues, João Paulo; Craveiro, Hélder D.. "Comportamento à flexão de vigas de aço enformadas a frio com enrijecedores na alma". Trabalho apresentado em X Congresso de Construção Metálica e Mista, 2015.
    Publicado
  53. Craveiro, Hélder D.; Luís Miguel dos Santos Laím; João Paulo Correia Rodrigues. "Experimental and Numerical Analysis of Lipped Channel Cold-Formed Steel Columns Subjected to Fire". Trabalho apresentado em EuroSteel 2014 – 7th European Conference on Steel and Composite Structures, Naples, 2014.
    Publicado
  54. Luís Miguel dos Santos Laím; João Paulo Correia Rodrigues; Craveiro, Hélder D.. "Numerical Modelling and Analysis of the Flexural Behaviour of Cold-Formed Steel Beams". Trabalho apresentado em EuroSteel 2014 – 7th European Conference on Steel and Composite Structures, Naples, 2014.
    Publicado
  55. João Paulo Correia Rodrigues; Craveiro, Hélder D.. "Experimental investigation on cold-formed steel beams with web stiffeners subjected to fire". Trabalho apresentado em 8th International Conference on Structures in Fire, Shangai, 2014.
    Publicado
  56. Laím, Luís; Rodrigues, João Paulo; Craveiro, Hélder D.. "Análise de Sensibilidade dos Modelos de Cálculo da EN 1993-1-2 para o Dimensionamento ao Fogo de Vigas C em Aço Enformado a Frio". Trabalho apresentado em 4as Jornadas de Segurança aos Incêndios Urbanos, 2014.
    Publicado
  57. Craveiro, Hélder D.; João Paulo Correia Rodrigues; Luís Miguel dos Santos Laím. "Cold-formed steel columns with restrained thermal elongation subjected to fire". Trabalho apresentado em INTERFLAM – 13th International Conference and Exhibition on Fire Science and Engineering, Londres, 2013.
    Publicado
  58. Craveiro, Hélder D.; João Paulo Correia Rodrigues; Luís Miguel dos Santos Laím. "Análise experimental do comportamento ao fogo de elementos comprimidos de aço enformado a frio". Trabalho apresentado em 2º CILASCI – Congresso Ibero-Latino-Americano sobre Segurança contra Incêndio, Coimbra, 2013.
    Publicado
  59. Craveiro, Hélder D.; Rodrigues, João Paulo; Laím, Luís. "Baseline study on the behaviour of cold-formed steel columns subjected to fire". Trabalho apresentado em Application of Structural Fire Engineering, 2013.
    Publicado • 10.3850/978-981-08-9247-0_rp032-icsas11
  60. Craveiro, Hélder D.; Rodrigues, João Paulo. "Verificação da resistência ao fogo de elementos de betão através de ensaios experimentais e numéricos". Trabalho apresentado em 3as Jornadas de Segurança aos Incêndios Urbanos, 2013.
Artigo em revista
  1. Rahnavard, Rohola; Razavi, Mahtabsadat; Fanaie, Nader; Craveiro, Hélder D.. "Evaluation of the composite action of cold-formed steel built-up battened columns composed of two sigma-shaped sections". Thin-Walled Structures 183 (2023): 110390. http://dx.doi.org/10.1016/j.tws.2022.110390.
    10.1016/j.tws.2022.110390
  2. Hélder D. Craveiro; Rohola Rahnavard; Luís Laím; Rui A. Simões; Aldina Santiago. "Buckling behavior of closed built-up cold-formed steel columns under compression". Thin-Walled Structures 179 (2022): 109493-109493. https://doi.org/10.1016/j.tws.2022.109493.
    10.1016/j.tws.2022.109493
  3. Rohola Rahnavard; Hélder D. Craveiro; Marco Lopes; Rui A. Simões; Luís Laím; Carlos Rebelo. "Concrete-filled cold-formed steel (CF-CFS) built-up columns under compression: Test and design". Thin-Walled Structures 179 (2022): 109603-109603. https://doi.org/10.1016/j.tws.2022.109603.
    10.1016/j.tws.2022.109603
  4. Luís Laím; Aldina Santiago; Hugo Caetano; Hélder D. Craveiro; Ashkan Shahbazian. "Numerical analysis and structural fire design of protected SHS steel columns with thermally enhanced gypsum-based mortars". Journal of Building Engineering (2022): https://doi.org/10.1016/j.jobe.2022.104629.
    10.1016/j.jobe.2022.104629
  5. Rohola Rahnavard; Hélder D. Craveiro; Rui A. Simões; Aldina Santiago. "Equivalent temperature prediction for concrete-filled cold-formed steel (CF-CFS) built-up column sections (part B)". Case Studies in Thermal Engineering (2022): https://doi.org/10.1016/j.csite.2022.102111.
    10.1016/j.csite.2022.102111
  6. Tankova, Trayana; Craveiro, Hélder; Silva, Luís Carlos; Ribeiro, Fernando F.; Simões, Rui; Martins, Claúdio; Costa, Ricardo; Simões da Silva, Luís. "Behaviour of plug-and-play joints between RHS columns and CFS trusses". Structures 41 (2022): 1719-1745. http://dx.doi.org/10.1016/j.istruc.2022.05.099.
    10.1016/j.istruc.2022.05.099
  7. Laím, Luís; Mendes, Jérôme; Craveiro, Hélder D.; Santiago, Aldina; Melo, Carlos. "Structural optimization of closed built-up cold-formed steel columns". Journal of Constructional Steel Research 193 (2022): 107266. http://dx.doi.org/10.1016/j.jcsr.2022.107266.
    10.1016/j.jcsr.2022.107266
  8. Rahnavard, Rohola; Craveiro, Hélder D.; Simões, Rui A.; Laím, Luís; Santiago, Aldina. "Fire resistance of concrete-filled cold-formed steel (CF-CFS) built-up short columns". Journal of Building Engineering 48 (2022): 103854. http://dx.doi.org/10.1016/j.jobe.2021.103854.
    10.1016/j.jobe.2021.103854
  9. Rahnavard, Rohola; Craveiro, Hélder D.; Simões, Rui A.; Santiago, Aldina. "Equivalent temperature prediction for concrete-filled cold-formed steel (CF-CFS) built-up column sections (part A)". Case Studies in Thermal Engineering 33 (2022): 101928-101928. http://dx.doi.org/10.1016/j.csite.2022.101928.
    10.1016/j.csite.2022.101928
  10. Hélder D. Craveiro; Rohola Rahnavard; José Henriques; Rui A. Simões; Craveiro, Hélder D.; Rahnavard, Rohola; Henriques, José; Simões, Rui A.. "Structural Fire Performance of Concrete-Filled Built-Up Cold-Formed Steel Columns". Materials 15 6 (2022): 2159-2159. https://doi.org/10.3390/ma15062159.
    10.3390/ma15062159
  11. Rohola Rahnavard; Hélder D. Craveiro; Rui A. Simões; Luís Laím; Aldina Santiago. "Buckling resistance of concrete-filled cold-formed steel (CF-CFS) built-up short columns under compression". Thin-Walled Structures 170 (2022): 108638-108638. https://doi.org/10.1016/j.tws.2021.108638.
    10.1016/j.tws.2021.108638
  12. Hélder Craveiro. "Post fire tensile properties of S355 J2 structural steel welded connections for construction industrial applications". Metallurgical Research & Technology 119 5 (2022): 511-511. http://dx.doi.org/10.1051/metal/2022056.
    10.1051/metal/2022056
  13. Rodrigues, D.M.; Leitão, C.; Balakrishnan, M.; Craveiro, H.D.; Santiago, A.. "Tensile properties of S355 butt welds after exposure to high temperatures". Construction and Building Materials 302 (2021): 124374. http://dx.doi.org/10.1016/j.conbuildmat.2021.124374.
    10.1016/j.conbuildmat.2021.124374
  14. Pereira, Miguel; Simões, Rui; Craveiro, Hélder. "Conception and design of high-performance steel-concrete composite slabs". ce/papers 4 2-4 (2021): 706-714. http://dx.doi.org/10.1002/cepa.1352.
    10.1002/cepa.1352
  15. Pimentel, Ricardo; Craveiro, Helder; Simões, Rui. "Fire design of composite beams and slabs: practical design considerations according to Eurocode 4". ce/papers 4 2-4 (2021): 1395-1402. http://dx.doi.org/10.1002/cepa.1437.
    10.1002/cepa.1437
  16. Laím, Luís; Craveiro, Helder D.; Simões, Rui. "Comparing Fire Behaviour of Restrained Cold-Formed Steel Columns with Stiffened and Unstiffened Sections". ce/papers 4 2-4 (2021): 473-480. http://dx.doi.org/10.1002/cepa.1318.
    10.1002/cepa.1318
  17. Matos, Rui; Craveiro, Hélder; Lopes, Tiago; Zanon, Riccardo; Tibolt, Mike. "Experimental and numerical analysis of three-point bending tests of steel beams with web holes". ce/papers 4 2-4 (2021): 289-295. http://dx.doi.org/10.1002/cepa.1295.
    10.1002/cepa.1295
  18. da Silva, Luís Simões; Tankova, Trayana; Craveiro, Hélder David; Silva, Luís Carlos; Simões, Rui; Costa, Ricardo. "Innovative 3D joint for steel modular construction". ce/papers 4 2-4 (2021): 958-963. http://dx.doi.org/10.1002/cepa.1384.
    10.1002/cepa.1384
  19. Rahnavard, Rohola; Craveiro, Hélder D.; Laím, Luís; Simões, Rui A.; Napolitano, Rebecca. "Numerical investigation on the composite action of cold-formed steel built-up battened columns". Thin-Walled Structures 162 (2021): 107553. http://dx.doi.org/10.1016/j.tws.2021.107553.
    10.1016/j.tws.2021.107553
  20. Santos, Pedro; Correia, João R.; Godinho, Luís; Dias, A.M.P.G.; Craveiro, Hélder. "Experimental and numerical assessment of a cross-insulated timber panel solution". Engineering Structures 235 (2021): 112061. http://dx.doi.org/10.1016/j.engstruct.2021.112061.
    10.1016/j.engstruct.2021.112061
  21. Martins, J.P.; Simões da Silva, L.; Tankova, T.; Craveiro, H.D.. "Corrigendum to “Reliability assessment of EC3-1-5 methodology of welded slender cross-sections under direct stresses” [Journal of Constructional Steel Research 160 (2019) 301–319] (Journal of Constructional Steel Research (2019) 160 (301–319), (S0143974X1930327X), (10.1016/j.jcsr.2019.05.035))". Journal of Constructional Steel Research 177 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85097372454&partnerID=MN8TOARS.
    10.1016/j.jcsr.2020.106478
  22. Simões da Silva, L.; Silva, L.C.; Tankova, T.; Craveiro, H.D.; Simões, R.; Costa, R.; D'Aniello, M.; Landolfo, R.. "Performance of modular hybrid cold-formed/tubular structural system". Structures 30 (2021): 1006-1019. http://www.scopus.com/inward/record.url?eid=2-s2.0-85100667798&partnerID=MN8TOARS.
    10.1016/j.istruc.2021.01.066
  23. Rahnavard, Rohola; Craveiro, Helder D.; Napolitano, Rebecca. "Static and dynamic stability analysis of a steel-rubber isolator with rubber cores". Structures 26 (2020): 441-455. http://dx.doi.org/10.1016/j.istruc.2020.04.048.
    10.1016/j.istruc.2020.04.048
  24. Laím, Luís; Craveiro, Hélder D.; Simões, Rui; Escudeiro, André; Mota, Alexandre. "Experimental analysis of cold-formed steel columns with intermediate and edge stiffeners in fire". Thin-Walled Structures 146 (2020): 106481. http://dx.doi.org/10.1016/j.tws.2019.106481.
    Publicado • 10.1016/j.tws.2019.106481
  25. Rahnavard, R.; Rebelo, C.; Craveiro, H.D.; Napolitano, R.. "Understanding the cyclic performance of composite steel-concrete connections on steel bridges". Engineering Structures 224 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85089435317&partnerID=MN8TOARS.
    10.1016/j.engstruct.2020.111213
  26. Rahnavard, R.; Rebelo, C.; Craveiro, H.D.; Napolitano, R.. "Numerical investigation of the cyclic performance of reinforced concrete frames equipped with a combination of a rubber core and a U-shaped metallic damper". Engineering Structures 225 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85091329393&partnerID=MN8TOARS.
    10.1016/j.engstruct.2020.111307
  27. Martins, J.P.; da Silva, L. Simões; Tankova, T.; Craveiro, Helder D.. "Reliability assessment of EC3-1-5 methodology of welded slender cross-sections under direct stresses". Journal of Constructional Steel Research 160 (2019): 301-319. http://dx.doi.org/10.1016/j.jcsr.2019.05.035.
    Publicado • 10.1016/j.jcsr.2019.05.035
  28. Shah Mohammadi, Mohammad Reza; Craveiro, Hélder D.; Rebelo, Carlos. "Numerical study of monopile offshore foundation dynamic behaviour using coupled simulation". Proceedings of the Institution of Civil Engineers - Structures and Buildings 172 8 (2019): 580-589. http://dx.doi.org/10.1680/jstbu.17.00191.
    Publicado • 10.1680/jstbu.17.00191
  29. Tankova, Trayana; Martins, João Pedro; Simões da Silva, Luís; Marques, Liliana; Craveiro, Hélder D.; Santiago, Aldina. "Experimental lateral-torsional buckling behaviour of web tapered I-section steel beams". Engineering Structures 168 (2018): 355-370. http://dx.doi.org/10.1016/j.engstruct.2018.04.084.
    Publicado • 10.1016/j.engstruct.2018.04.084
  30. Tankova, Trayana; Martins, João Pedro; Simões da Silva, Luís; Simões, Rui; Craveiro, Helder D.. "Experimental buckling behaviour of web tapered I-section steel columns". Journal of Constructional Steel Research 147 (2018): 293-312. http://dx.doi.org/10.1016/j.jcsr.2018.04.015.
    Publicado • 10.1016/j.jcsr.2018.04.015
  31. Craveiro, H.; Rodrigues, J.P.C.; Laim, L.; Craveiro, Hélder; Rodrigues, João Paulo Correia; Laim, Luis. "Cold-formed steel columns at both ambient and fire conditions". Journal of Structural Fire Engineering 9 3 (2018): 189-202. http://www.scopus.com/inward/record.url?eid=2-s2.0-85033577937&partnerID=MN8TOARS.
    Publicado • 10.1108/JSFE-01-2017-0018
  32. Craveiro, Helder; Ribeiro, João; Breda, Ricardo. "07.26: Structural analysis of C and I shaped cold-formed steel columns". ce/papers 1 2-3 (2017): 1726-1735. http://dx.doi.org/10.1002/cepa.216.
    Publicado • 10.1002/cepa.216
  33. Rodrigues, J.P.C.; Laim, L.; Craveiro, H.D.. "Influence of web stiffeners on cold-formed steel beams subjected to fre". Journal of Structural Fire Engineering 7 3 (2016): 249-261. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992700319&partnerID=MN8TOARS.
    10.1108/JSFE-09-2016-018
  34. Craveiro, H.D.; Rodrigues, J.P.C.; Santiago, A.; Laím, L.. "Review of the high temperature mechanical and thermal properties of the steels used in cold formed steel structures - The case of the S280 Gd+Z steel". Thin-Walled Structures 98 (2016): 154-168. http://www.scopus.com/inward/record.url?eid=2-s2.0-84933557661&partnerID=MN8TOARS.
    10.1016/j.tws.2015.06.002
  35. Laím, L.; Rodrigues, J.P.C.; Craveiro, H.D.. "Flexural behaviour of axially and rotationally restrained cold-formed steel beams subjected to fire". Thin-Walled Structures 98 (2016): 39-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925707554&partnerID=MN8TOARS.
    10.1016/j.tws.2015.03.010
  36. Craveiro, H.D.; Paulo, J.; Rodrigues, C.; Laím, L.. "Buckling resistance of axially loaded cold-formed steel columns". Thin-Walled Structures 106 (2016): 358-375. http://www.scopus.com/inward/record.url?eid=2-s2.0-84971327219&partnerID=MN8TOARS.
    10.1016/j.tws.2016.05.010
  37. Craveiro, H.D.; Rodrigues, J.P.C.; Laím, L.. "Experimental analysis of built-up closed cold-formed steel columns with restrained thermal elongation under fire conditions". Thin-Walled Structures 107 (2016): 564-579. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979529675&partnerID=MN8TOARS.
    10.1016/j.tws.2016.07.001
  38. Laím, L.; Rodrigues, J.P.C.; Craveiro, H.D.. "Flexural behaviour of beams made of cold-formed steel sigma-shaped sections at ambient and fire conditions". Thin-Walled Structures 87 (2015): 53-65. http://www.scopus.com/inward/record.url?eid=2-s2.0-84913594382&partnerID=MN8TOARS.
    10.1016/j.tws.2014.11.004
  39. Craveiro, H.D.; Rodrigues, J.P.C.; Laím, L.. "Cold-formed steel columns made with open cross-sections subjected to fire". Thin-Walled Structures 85 (2014): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84906510928&partnerID=MN8TOARS.
    10.1016/j.tws.2014.07.020
Artigo em revista (magazine)
  1. Craveiro, Hélder. "Buckling behavior of cold-formed steel columns at both ambient temperature and simulated fire conditions", 2016
    https://doi.org/10.4081/fire.2017.16
  2. Craveiro, Hélder. "Structural fire performance of restrained composite columns made of concrete-filled square and circular hollow sections", 2016
    https://doi.org/10.4081/fire.2017.15
Capítulo de livro
  1. Miculas, C. V.; Costa, R. J.; Simões da Silva, Luís; Simões, R.; Craveiro, H.; Tankova, T.. "Macro-modelling of the Three-Dimensional Interaction Between the Faces of a Steel Tubular Column Joint". In Proceedings of the 2022 Eurasian OpenSees Days, 408-422. Springer Nature Switzerland, 2023.
    10.1007/978-3-031-30125-4_37
  2. Fiorini, Cesare; Craveiro, Hélder D.; Santiago, Aldina; Laim, Luís; Silva, Luís Simões da. "Microscale fire modelling at the Wildland-Urban Interface". In Advances in Forest Fire Research 2022, 689-694. Imprensa da Universidade de Coimbra, 2022.
    10.14195/978-989-26-2298-9_105
  3. Beyki, Shahab Mohammad; Santiago, Aldina; Laím, Luís; Craveiro, Helder D.. "Wildfire and evacuation simulation: An overview of research, development, and practice". In Advances in Forest Fire Research 2022, 815-821. Imprensa da Universidade de Coimbra, 2022.
    10.14195/978-989-26-2298-9_124
  4. Luís Miguel dos Santos Laím; Craveiro, Hélder D.; João Paulo Correia Rodrigues. "Baseline study on the behaviour of cold-formed steel elements subjected to fire". In COST Action TU0904 – Integrated Fire Engineering and Response, Benchmark studies – Experimental validation of numerical models in fire engineering, 73-85. República Checa: CTU Publishing House, Czech Technical University in Prague, 2014.
    Publicado
Edição de livro
  1. Craveiro, Hélder D.. Book of abstracts of the International Fire Safety Symposium 2015. Coimbra, Portugal. 2015.
    Publicado • Editor
  2. Craveiro, Hélder D.. Proceedings of the International Fire Safety Symposium, 2015. Coimbra, Portugal. 2015.
    Publicado • Editor
Poster em conferência
  1. Craveiro, Hélder; CESARE G. FIORINI ; Tesch, Luana; Aldina Santiago; Laím, Luís. "Definition of a holistic regulatory framework for enhancing safety and resilience of the built environment in the wildland-urban interface". Trabalho apresentado em 8th International Wildland Fire Conference, 2023.
  2. CESARE G. FIORINI ; Craveiro, Hélder; Santiago, Aldina; Laím, Luís. "A field experimental test on a mockup of steel sandwich panels subjected to shrub fire". Trabalho apresentado em 8th International Wildland Fire Conference, 2023.
  3. Tesch, Luana; Craveiro, Hélder; Gervásio, Helena; Santiago, Aldina. "Wildfire impact analysis of Portugal's built environmetn considering climate change scenario". Trabalho apresentado em 8th International Wildland Fire Conference, 2023.
Relatório
  1. Craveiro, Hélder D.. 2019. CentroAdapt – Innovative solutions for enhanced fire resistance of cold-formed steel structures. Final report..
  2. Silva, Luis Alberto Proença Simões da ; Craveiro, Hélder D.; Ricardo Costa; Rui A. Simões; Gorka Iglesias; Milan Veljkovic. 2018. INNO3DJOINTS - Deliverable D8.1 – State-of-the-art and comprehensive overview of the project.
Tese / Dissertação
  1. Craveiro, Hélder D.. "Fire resistance of cold-formed steel columns". Doutoramento, Universidade de Coimbra, 2016. https://estudogeral.sib.uc.pt/handle/10316/29612.
  2. Craveiro, Hélder D.. "Analysis of the structural behaviour strengthened composite slabs with profiled steel sheeting (in Poertuguese)". Mestrado, Universidade de Coimbra, 2011.
Website
  1. Craveiro, Hélder. SFPE23 Annual Conference & Expo. 2022. https://www.interfacesegura.pt/.

Propriedade Intelectual

Pedido provisório de patente
  1. 2022. "A prefabricated, modular, multi-material composite hybrid system".
    Protegido

Outros

Outra produção
  1. Conceptual design of steel buildings. Teaching material outputs prepared for the classes. Simões, R.A., Craveiro, HD, (2017), Conceptual design of steel buildings, Steel and mixed construction Master and PhD program, 2017-2018.. 2017. Craveiro, Hélder D.; Rui António Duarte Simões.
  2. Structural fire design of steel and steel and concrete composite structures under fire conditions, Steel and mixed construction Master and PhD program 2015-2016.. Teaching material outputs used in the classes. Craveiro, HD., Santiago, Aldina (2018), Structural fire design of steel and steel and concrete composite structures under fire conditions, Steel and mixed construction Master and PhD program 2015-2016. Available in: https://inforestudante.uc.pt/. 2016. Craveiro, Hélder D..
  3. Advanced Topics in the Design of Offshore Structures. Accidental Actions – FIRE. Teaching material outputs to use in the classes: Advanced Topics in the Design of Offshore Structures. Accidental Actions – FIRE. 2016. Craveiro, Hélder D..
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2021/11/25 COMPORTAMENTO ESTRUTURAL DE COLUNAS DE AÇO ENFORMADO A FRIO COMPOSTAS E LIGADAS POR TRAVESSAS À COMPRESSÃO XIII CMM - XIII Congresso de Construção Metálica e Mista
CMM (Coimbra, Portugal)
2021/06/10 BEHAVIOUR OF INNOVATIVE CONCRETE FILLED BUILT-UP COLD-FORMED STEEL COLUMNS IN FIRE ASFE 21 - Applications of Structural Fire Engineering 2021
(Ljubliana, Eslovénia)
2021/05/14 INTERFACESEGURA - SEGURANÇA E RESILIÊNCIA AO FOGO DAS ZONAS DE INTERFACE URBANA-FLORESTAL 2º Workshop Projetos de Investigação Científica e Desenvolvimento Tecnológico no Âmbito da Prevenção e Combate a Incêndios Florestais
ADAI (Coimbra, Portugal)
2021/02/16 INTERFACESEGURA - SEGURANÇA E RESILIÊNCIA AO FOGO DAS ZONAS DE INTERFACE URBANA-FLORESTAL BEST Green Day
BEST Coimbra (Coimbra, Portugal)
2019/11 WUIFIRESAFER - Safety and Resilience enhancement of the Wildland-Urban Interfaces Projetos de IC&DT no âmbito da Prevenção e Combate a Incêndios Florestais
Fundação para a Ciência e Tecnologia (Lisboa, Portugal)
2019 Experimental assessment of exceptionally large steel connections to be used in the new LBNF laboratory (in portuguse) XII Congresso de Construção Metálica e Mista
cmm - Associação Portuguesa de Construção Metálica e Mista (Coimbra, Portugal)
2019 Structural behaviour of composite cold-formed steel columns under fire conditions XII Congresso de Construção Metálica e Mista
cmm - Associação Portuguesa de Construção Metálica e Mista (Coimbra, Portugal)
2018/08/15 Recent Research on Steel Structures – from high strength steel application to structural fire resistance Research & Development Days of Steel Structures (Teräsrakentamisen T&K-päivät)
HAMK (Hämeenlinna, Finlândia)
2018 Incêndios na interface urbano-florestal. Riscos e desafios. Workshop CentroAdapt – Centro de Vanguarda em Adaptações às Alterações Climáticas Workshop CentroAdapt – Centro de Vanguarda em Adaptações às Alterações Climáticas
Universidade de Coimbra (Coimbra, Portugal)
2017/09 Structural analysis of C and I shaped cold-formed steel columns 8th European Conference on Steel and Composite Structures
Technical University of Denmark (Copenhagen, Dinamarca)
2017/02 Fire resistance and fire reaction testing for construction products APSEI - Núcleo Autónomo de Proteção Passiva meeting
Universidade de Coimbra (Coimbra, Portugal)
2015/04 Parametric study on cold-formed steel columns made with open cross-section subjected to fire IFireSS – International Fire Safety Symposium
University of Coimbra (Coimbra, Portugal)
2015/04 Experimental investigation on the behaviour of cold-formed steel columns made with open cross-section subjected to fire IFireSS – International Fire Safety Symposium
University of Coimbra (Voimbra, Portugal)
2015 Experimental and numerical analysis of cold-formed steel columns at both ambient and fire conditions Friday @ ISISE
University of Coimbra (Coimbra, Portugal)
2014 Numerical Modelling and Analysis of the Flexural Behaviour of Cold-Formed Steel Beams EuroSteel 2014 – 7th European Conference on Steel and Composite Structures
Department of Structures for Engineering and Architecture (DiSt) of the University of Naples Federico II (UNINA) (Naples, Itália)
2014 Experimental and Numerical Analysis of Lipped Channel Cold-Formed Steel Columns Subjected to Fire EuroSteel 2014 – 7th European Conference on Steel and Composite Structures
Department of Structures for Engineering and Architecture (DiSt) of the University of Naples Federico II (UNINA) (Naples, Itália)
2014 Experimental and numerical analysis of cold-formed steel columns at both ambient and elevated temperatures 3rd International Ph.D. Students’ Workshop
University of Coimbra (Coimbra, Portugal)
2014 Baseline study on the behaviour of cold-formed steel elements subjected to fire. COST Action TU0904 - Training School for Young Researchers “Fire Engineering Research – Benchmark Studies
Lulea University of Technology (Lulea, Suécia)
2013/06 Cold-formed steel columns with restrained thermal elongation subjected to fire INTERFLAM – 13th International Conference and Exhibition on Fire Science and Engineering
Royal Holloway College, Nr Windsor (London, Reino Unido)
2013 Numerical and experimental analysis of concrete-filled steel hollow columns subjected to fire. INTERFLAM – 13th International Conference and Exhibition on Fire Science and Engineering
Royal Holloway College, Nr Windsor (London, Reino Unido)
2013 Análise experimental do comportamento ao fogo de elementos comprimidos de aço enformado a frio , 2º CILASCI – Congresso Ibero-Latino-Americano sobre Segurança contra Incêndio
University of Coimbra (Coimbra, Portugal)

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2023/05/01 - Atual Structural fire behaviour of built-up cold-formed steel columns
Orientador
Integrated Master in Civil Engineering (Mestrado)
Universidade de Coimbra, Portugal
2022/02 - Atual Avaliação de propriedades mecãnicas e térmicas de aços formados a frio à temperatura ambiente e elevada
Orientador
Mestrado Integrado (Mestrado)
Universidade de Coimbra Departamento de Engenharia Civil, Portugal
2021/12/01 - Atual Safety enhancement and resilience of the built-environment in the Wildland-Urban Interface - FCT 2021.08194.BD
Orientador
Doutoramento em Construção Metálica e Mista (Doutoramento)
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2021/09/16 - Atual Development of innovative shear connecting systems for steel-concrete composite floors and bridge decks towards ease of construction and deconstruction
Coorientador
Programa Doutoral em Construção Metálica e Mista (Doutoramento)
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2021/09/01 - Atual Modular construction with innovative 3D joints
Coorientador
Programa Doutoral em Construção Metálica e Mista (Doutoramento)
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2019 - Atual Análise experimental e numérica de ligações – Long Baseline Neutrino Facility – LBNF Steel joints experimental validation
Orientador de André de Albuquerque Carvalho
Mestrado Integrado em Engenharia Civil (Mestrado)
Universidade de Coimbra, Portugal
2018 - Atual Development and analysis of innovative configurations for composite beams in hybrid modular construction: use of cold-formed steel and lightweight concrete.
Orientador de Paulo Jorge Rodrigues Saraiva
Douramento em Construção Metálica e Mista (Doutoramento)
Universidade de Coimbra, Portugal
2021/01/01 - 2024 Innovative hybrid structural system combining cold-formed steel and lightweight concrete - FCT 2021.06528.BD
Orientador
PhD in Steel and Composite Construction (Doutoramento)
Universidade de Coimbra, Portugal
2022/11/01 - 2023/03/10 Mechanical properties of S355 butt welds at elevated temperatures
Coorientador
Master Course in Civil Engineering (Mestrado)
Università degli studi di Salerno, Itália

Universidade de Coimbra, Portugal
2021 - 2021 Análise experimental de colunas de aço enformado a frio compostas por travessas à compressão
Orientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Comportamento de colunas inovadoras mistas de aço enformado a frio e betão leve
Orientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Avaliação da degradação das propriedades mecânicas de juntas soldadas com o aumento da temperatura
Orientador
Construção Metálica e Mista (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021 - 2021 Análise comparativa de soluções estruturais em aço em pavilhões industriais
Coorientador
Construção Metálica e Mista (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020 - 2020 Propagação de Incêndios de Compartimento: Ação em um Pilar Externo
Coorientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019 - 2019 Validação do dimensionamento de ligações metálicas de grandes dimensões
Orientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Design of innovative highly efficient ligtweight steel structural system
Orientador de Francesco Saverio Caruso
Mestrado Integrado em Engenharia Civil (Mestrado)
Universidade de Coimbra, Portugal
2018 - 2018 Design and modelling of hybrid plug & play joints
Orientador de Luigi Forlingieri
Mestrado Integrado em Engenharia Civil (Mestrado)
Universidade de Coimbra, Portugal
2018 - 2018 Ensaios cíclicos em ligações "FREEDAM" com dissipação de energia
Coorientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Avaliação das propriedades mecânicas a temperaturas elevadas de aços enformados a frio
Coorientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018 - 2018 Avaliação experimental e numérica da resistência ao esforço transverso em lajes mistas
Coorientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2016 - 2016 Análise estrutural de elementos comprimidos de aço enformado a frio a temperatura ambiente e a fogo
Coorientador de Duarte Oliveira
Mestrado Integrado em Engenharia Civil (Mestrado)
Universidade de Coimbra, Portugal
2016 - 2016 Resistência ao fogo de colunas tubulares de secção circular e elíptica com restrição à dilatação térmica
Coorientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2015 - 2015 Estudo das propriedades mecânicas e térmicas a altas temperaturas do aço enformado a frio S280GD+Z
Coorientador
Engenharia Civil (Mestrado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2023/03/01 - Atual Member of the Organizing Committee of the 13th International Conference on Structures in Fire - 13th SiF 2024 (2023/03/01 - 2024/06/30)
Conferência (Membro da Comissão Organizadora)
Universidade de Coimbra, Portugal

Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2021/12/07 - Atual Webinar – Decisões e Planos de Evacuação em Cenários de Incêndio Florestal – A realidade Portuguesa, Webinar organizado no âmbito dos projetos de investigação INTERFACESEGURA e EVACUAR FLORESTA (2021/12/07)
Outro (Membro da Comissão Organizadora)
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2021/07/26 - Atual Webinar – Segurança e Resiliência ao Fogo das Zonas de Interface Urbano-Florestal, Webinar organizado no âmbito do projeto INTERFACESEGURA (2021/07/26)
Outro (Membro da Comissão Organizadora)
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2021/05/18 - Atual Webinar – A interligação da SCIE no combate a incêndios urbanos e industriais, palestra ministrada por Nélson Antunes, Coordenador do Centro de Formação em Incêndios Urbanos e Industriais Comandante dos Bombeiros Voluntários de Coimbra. Evento realizado no dia 18 de Maio de 2021. Evento com 88 participantes (online) (2021/05/18)
Outro (Coorganizador)
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2018/10/04 - 2018/10/05 Organization of the workshop 35º Fórum APSEI – Reação ao Fogo de Revestimentos de Fachada, Associação Portuguesa de Segurança, 4th of October 2018, University of Coimbra. (2018/10/04)
Oficina (workshop) (Coorganizador)
Universidade de Coimbra, Portugal
2017/06/06 - 2017/06/07 Organization of the workshop 31º Fórum APSEI – Manutenção de sistemas de proteção passiva contra incêndio, 6th of June 2017, University of Coimbra. (2017/06/06)
Oficina (workshop) (Coorganizador)
Universidade de Coimbra, Portugal
2017/02/21 - 2017/02/22 Organization of the meeting APSEI – Associação Portuguesa de Segurança. Assembleia do Núcleo Autónomo de Proteção Passiva, 21st of February 2017. (2017/02/21)
Oficina (workshop) (Coorganizador)
Universidade de Coimbra, Portugal
2015/04/13 - 2015/04/17 Organization of the meetings of the SC3 groups SC 3 (Fire Threat to People and Environment) and SC 4 (Fire Safety Engineering) of TC92 (Fire Safety) of ISO (International Organization for Standardization), organized by the University of Coimbra and by Associação Luso-Brasileira para a Segurança Contra Incêndio (Albrasci), Coimbra, Portugal, 13-17 April 2015. (2017/04/13 - 2017/04/17)
Encontro (Coorganizador)
Universidade de Coimbra, Portugal
2015 - 2015 Member of the Organizing Committee of the International Fire Safety Symposium, IFireSS, organized by the University of Coimbra (UC), and by the International Council for Research and Innovation in Building Construction (CIB) and Associação Luso-Brasileira para a Segurança Contra Incêndio (Albrasci), Coimbra, Portugal, April 2015. (2015 - 2015)
Conferência (Coorganizador)
Universidade de Coimbra, Portugal

Júri de grau académico

Tema
Tipo de participação
Nome do candidato (Tipo de grau)
Instituição / Organização
2021/07/30 Robustness, Redundacy and progressive colapse of fixed offshore structures
Arguente
Armando Miguel Refachinho Correia (Mestrado)
Universidade de Coimbra Departamento de Engenharia Civil, Portugal
2020/02/20 Development of optimized simplified methods for structural analysis - Project of Thesis
Arguente
Jorge Fernando Cunha Teixeira (Outro)
Universidade de Coimbra Departamento de Engenharia Civil, Portugal
2019 Fachadas com fixações pontuais em vidro agrafado - Análise e comparação entre ligações aparafusadas em sistemas totalmente perfurantes e sistemas embutidos
Arguente principal
Diogo Barroqueiro Isidoro (Mestrado)
Universidade de Coimbra, Portugal
2019 Development of indicators for the assessment of the suatainability of consolidated urban centers
Arguente principal
Luís Pedro Monteiro dos Reis (Mestrado)
Universidade de Coimbra, Portugal
2017 Extensão da vida útil à fadiga de estruturas offshore fixas formadas por elementos tubulares
Arguente
Tiago Pinto Ribeiro (Mestrado)
Universidade de Coimbra, Portugal
2016 Análise e dimensionamento de vigas mistas aço-betão: soluções convencionais e soluções “slimfloor”
Arguente
Ricardo José de Almeida Pimentel (Mestrado)
Universidade de Coimbra, Portugal
2016 Betão com adição de fibras de aço e têxteis recicladas de pneu sujeito a altas temperaturas
Arguente principal
Maria Eduarda Mendes Daniel (Mestrado)
Instituto Politécnico de Castelo Branco, Portugal

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2021 - Atual Fire Safety Journal Elsevier
2020 - Atual Journal of Constructional Steel Research (0143-974X) Elsevier
2018 - Atual Thin-Walled Structures (0263-8231) Elsevier
2017 - Atual Engineering Structures (0141-0296) Elsevier
2021 - 2022/09/23 Applied Sciences - Guest Editor in the Special Issue "Wildland-Urban Interface and Risk of Wildfires" (ISSN 2076-3417) MDPI
2021 - 2022/07/10 Materials - Guest Editor of Special Issue "Composite Structures towards a More Sustainable Construction Sector" (ISSN 1996-1944) MDPI

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2020/02/06 - Atual Technical assessment of the damage of an industrial building destroyed by fire. Research team: Professor Rui Simões, Hélder Craveiro, Aldina Santiago ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2021/09/01 - 2021/12/03 Composite tubular columns load tables for the Steligence Virtual Design Platform - Developemnt of a software tool for the design of composite columns for ARCELORMITTAL in the scope of the Virtual Design Platform ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2021 - 2021 Collaborator in the Technical Opinion "Fire Behaviour of ventilated façade system considered in the project of the KINAXIXI MXD COMPLEX taken into account the required cavity barriers and the recommendations of the British Standards. Part 2 – Plan for fire-resistant cavity barriers" under the framework for the consultancy services between Association for the development of Civil Engineering (ACIV) and the Martifer, SA. ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2020 - 2021 Collaborator in the study "SUPEROMEGA®: ESTUDO COMPLEMENTAR" under the framework for the consultancy services between Association for the development of Civil Engineering (ACIV) and O FELIZ, Metalomencânica SA. ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2020/02/10 - 2020/08/10 ArcelorMittal – Steligence Residential case sudy Research team: Prof. Luís Simões da Silva, Helder Craveiro, Professor Rui Simões, Universidade de Coimbra, Portugal

ArcelorMittal Europe, Luxemburgo
2020/01/10 - 2020/06/30 O Feliz, S.A. – Development of optimized Omega cold-formed steel sections. Structural analysis and optimization according to the EN 1993-1-3. Experimental testing and numerical simulation for complete validation. Part II. Research team: Professor Doutor Rui Duarte Simões, Doutor Hélder Craveiro. Universidade de Coimbra, Portugal

OFeliz, Portugal
2019/10/01 - 2020/04/30 ArcelorMittal – The use of High-Strength Cold-Formed Steel for Structural Applications. Research team: Prof. João Pedro Martins, Helder Craveiro, Luís Laím, Eng. Cláudio Martins. Universidade de Coimbra, Portugal

ArcelorMittal Europe, Luxemburgo
2019/12/01 - 2020/03/31 ArcelorMittal – Experimental tests for the definition of a systematic procedure for precambering of steel beams. Part II - Material Characterization Research team: Prof. Luís Simões da Silva, Helder Craveiro, Professor Rui Simões, Eng. Cláudio Martins. Universidade de Coimbra, Portugal

ArcelorMittal Europe, Luxemburgo
2019/07/01 - 2020/01/31 IST, Lisbon – Determination of thermal properties using the Transient Plane Source technique. Research team: Prof. Luís Simões da Silva, Hélder Craveiro, Luís Laím. Universidade de Coimbra, Portugal

Associação para o Desenvolvimento do Instituto Superior Técnico, Portugal
2020 - 2020 Collaborator in the Technical Opinion "Fire Behaviour of ventilated façade system considered in the project of the KINAXIXI MXD COMPLEX taken into account the required cavity barriers and the recommendations of the British Standards (Part 1)" under the framework for the consultancy services between Association for the development of Civil Engineering (ACIV) and the Martifer, SA. ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2020 - 2020 Collaborator in the study "Resistência ao Fogo de Lajes Mistas" under the framework for the consultancy services between Association for the development of Civil Engineering (ACIV) and the University of Minho. ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2019/07/01 - 2019/12/05 CERN – European Organization for Nuclear Research. Experimental tests on the large M48HR, 10.9 bolt assemblies. Research team: Professor Luís Simões da Silva, Hélder Craveiro, Professor Rui Simões, Eng.º Cláudio Martins Universidade de Coimbra, Portugal

European Organization for Nuclear Research, Suiça
2019/02/01 - 2019/06/30 ArcelorMittal – Experimental tests for the definition of a systematic procedure for precambering of steel beams. Part I - Test on beams. Research team: Prof. Luís Simões da Silva, Helder Craveiro, Professor Rui Simões, Eng. Cláudio Martins. Universidade de Coimbra, Portugal

ArcelorMittal Europe, Luxemburgo
2018/02/01 - 2019/04/30 WORLDSTEEL Association – Comparative study of LSF residential building versus steel, reinforced concrete and timber structural solutions. Part I and II Research team: Professor Doutor Luís Simões da Silva, Doutor Hélder D. Craveiro, Prof. Luís Godinho, Prof. Aldina Santiago, Prof. Rui Simões, Prof. Diogo Mateus, Prof. Andreia Pereira, Prof. Paulo A. Mendes, Trayana Tankova, Luís Laím, Aline Gomes Universidade de Coimbra, Portugal

WorldSteel Association , Bélgica
2017/06/01 - 2019/04/30 CERN – European Organization for Nuclear Research. Experimental tests on the steel joints of the Long-Baseline Neutrino Facility (LBNF), to support the new Deep Underground Neutrino Experiment (DUNE). Research team: Professor Luís Simões da Silva, Hélder Craveiro, Professor Rui Simões, Eng.º Cláudio Martins Universidade de Coimbra, Portugal

European Organization for Nuclear Research, Suiça
2017 - 2017 Gypfor – Gessos Laminadas, S.A. – Fire resistance tests for compartmentation elements. Research team FireLab_UC Universidade de Coimbra, Portugal
2017 - 2017 Palser – Bioenergia e Paletes, Lda. – Evaluation of thermal properties of thermally treated timber (212ºC) using the Transient Plane Source technique. Research team FireLab_UC Universidade de Coimbra, Portugal
2017 - 2017 Active Space Technologies – Actividades Aeroespaciais, S.A. Evaluation of the mechanical properties of the high strength steel CUSTOM 455 H1000. Research team FireLab_UC Universidade de Coimbra, Portugal
2017 - 2017 JB Sociedade Imobiliária, Lda. – Experimental tests for evaluation of the mechanical properties of concrete according to EN 12390. Research team FireLab_UC Universidade de Coimbra, Portugal
2016 - 2016 O Feliz, S.A. – Development of optimized Omega (O) cold-formed steel sections. Structural analysis and optimization according to the EN 1993-1-3. Experimental testing and numerical simulation for complete validation. Universidade de Coimbra, Portugal
2015 - 2015 ARS Centro e ULS Guarda. - Fire safety design project. Co-author of Self-Protection measures for Sousa Martins Hospital, Guarda, Portugal. Research team: Eng. Luís Serra e Silva, Professor Doutor João Paulo Rodrigues, Doutor Helder Craveiro. Universidade de Coimbra, Portugal
2014 - 2014 STAP, S.A., PETROGAL, S.A., Sines – Experimental and numerical analysis of composite protection solutions. Fire resistance tests. Research team: Professor Doutor João Paulo Rodrigues, Doutor Hélder Craveiro. Universidade de Coimbra, Portugal
2014 - 2014 PERFITEC, Revestimentos Metálicos, Lda. – Fire resistance tests, WallMeta FIRECLASS. Experimental tests according to EN 14509:2006. Classification according to the EN 13501-2:2007. Research team: Professor Doutor João Paulo Rodrigues, Doutor Hélder Craveiro. Universidade de Coimbra, Portugal

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2016 - Atual Lecturer/Trainer in the course Advanced Topics in the Analysis of Offshore Structures – 1st Edition Advanced Topics in the Analysis of Offshore Structures cmm – Associação Portuguesa de Construção Metálica e Mista, Portugal
2016 - 2020 Structural fire design of steel and composite structures Mestrado em Construção Metálica e Mista (Mestrado) Universidade de Coimbra, Portugal
2016 - 2020 Advanced Structural Fire Design of Steel and Composite Structures Doutoramento em Construção Metálica e Mista (Doutoramento) Universidade de Coimbra, Portugal
2019/02/01 - 2019/02/28 Design of Steel Structures II Bachelor Course of Construction Engineering (Bachelor) Hame University of Applied Sciences - HAMK, Finlândia
2017 - 2018 Design of cold-formed steel, aluminium and stainless steel structures Doutoramento em Construção Metálica e Mista (Doutoramento) Universidade de Coimbra, Portugal
2017/09/29 - 2017/09/30 Lecturer/Trainer in the course Structural fire design of steel and composite structures. Structural fire design of steel and steel-concrete structures according to relevant Eurocodes. Structural fire design of steel and composite structures (Outros) cmm – Associação Portuguesa de Construção Metálica e Mista, Portugal
2017/09 - 2017/09 Lecturer/Trainer in the course Structural fire design of steel and composite structures. cmm – Associação Portuguesa de Construção Metálica e Mista, 29th and 30th of September 2017, iParque, Coimbra. Structural fire design of steel and composite structures (Outros) cmm – Associação Portuguesa de Construção Metálica e Mista, Portugal
2016/10/08 - 2016/10/11 Lecturer/Trainer in the course Advanced Topics in the Analysis of Offshore Structures – 1st Edition. Structural fire design and risk assessment on the topside of offshore structures. Advanced Topics in the Analysis of Offshore Structures (Outros) cmm – Associação Portuguesa de Construção Metálica e Mista, Portugal
2015/03/21 - 2015/06/21 Lecturer/Trainer in the course Portuguese fire safety legislation. Portuguese fire safety legislation (Outros) ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2015 - 2015 Lecturer/Trainer in the course Portuguese fire safety legislation. ACIV – Associação para o Desenvolvimento da Engenharia Civil. Department of Civil Engineering of the University of Coimbra. Portuguese fire safety legislation ACIV – Associação para o Desenvolvimento da Engenharia Civil., Portugal
2014 - 2014 Lecturer/Trainer in the course Self-protection measures and Emergency plan in the Sousa Martins Hospital. Self-protection measures and Emergency plan in the Sousa Martins Hospital. Hospital Sousa Martins, Unidade Local de Saúde da Guarda, Portugal

Membro de associação

Nome da associação Tipo de participação
2021 - Atual Large Outdoor Fires & the Built Environment Working Group - INTERNATIONAL ASSOCIATION FOR FIRE SAFETY SCIENCE Member
2019 - Atual cmm - Associação Portuguesa de Construção Metálica e Mista Associate
2017 - Atual ACIV - Associação para o Desenvolvimento da Engenharia Civil Member
2012 - Atual Ordem dos Engenheiros Effective Member

Membro de comissão

Descrição da atividade
Tipo de participação
Instituição / Organização
2023 - Atual Member of the national technical Committee CT182 - Execution of metallic constructions
Membro
Universidade de Coimbra, Portugal
2022/11 - Atual Member of ECOS – Environmental Coalition on Standards, involved in standardisation technical committee CEN/TC 135 “Execution of steel structures and aluminium structures”, contributing within WG2 for the definition of the technical requirements for the reuse of structural steel.
Consultor
ECOS – Environmental Coalition on Standards, Bélgica
2022 - Atual ECCS/Technical Committee 11, Working Group 6 - Steel-timber composite structures. Item 8 - Fire
Membro
2023/01 - 2024/07 Member of the Organizing Committe of the 13th International Conference on Structures in Fire - SiF'24
Membro
Universidade de Coimbra, Portugal

Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2012 - 2015 Fire Safety Engineering Ph.D. Student’s Representative at the Pedagogic Board of the Faculty of Science and Technology of the University of Coimbra, from 2012-2015.
Outro
Universidade de Coimbra, Portugal

Processo legal

Descrição da atividade Caso
2018/05/01 - 2018/07/31 Appointed expert for specialised consulting by Tribunal Judicial da Comarca de Coimbra, Juízo Central Cível de Coimbra, 2018.
Distinções

Prémio

2022 Best Presentation Award ISISE Day Out Workshop
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2022 KickStart @ ISISE - Best research project idea - CONNECT - Innovative connecting devices for steel-CLT composite floor systems towards a sustainable construction sector
Instituto para a Sustentabilidade e Inovação em Engenharia Estrutural, Portugal
2020 Individual Call to Scientific Employment Stimulus - 3rd Edition - 2020.03588.CEECIND
Fundação para a Ciência e a Tecnologia, Portugal

Outra distinção

2022 Certificate of Reviewing, in recognition of the review made for the journal Thin-Walled Structures
Elsevier BV, Países Baixos
2022 Certificate of Outstanding Contribution in Reviewing, in recognition of the contributions made to the quality of the journal Engineering Structures (July 2017).
Elsevier BV, Países Baixos
2022 Certificate of Reviewing, in recognition of the review made for the Fire Safety Journal
2017 Certificate of Reviewing, in recognition of the review made for the journal of Constructional Steel Research
Elsevier BV, Países Baixos
2015 Award for the best curricular internship report of Colégio de Engenharia Civil da Região Centro da Ordem dos Engenheiros.
Ordem dos Engenheiros, Portugal