???global.info.a_carregar???
JOSÉ CARLOS FERNANDES TEIXEIRA. Completed the Título de Agregado by Universidade do Minho in Jan 15, 2005; PhD in Chemical Engineering in 1989 by the University of Birmingham (UK) and the Licenciatura in Engenharia Metalomecânica in September 30, 1983 by the Universidade do Minho. He is Full Professor at the Universidade do Minho. Published 48 articles in journals. Has 13 section of books and 9 book. Organized 9 events, including the ECOS in 2018. Supervised 11 PhD theses e co-supervised 4. Has also supervised nearly 100 master theses. Participates or participated as Principal investigator in 15 projects and Researcher in 8 projects. Works in the area of Engineering and Technology with emphasis on Mechanical Engineering. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: Fluids; Energy; Heat Transfer. His scientific research area is within the field of Transport Phenomena. In this context, one of the main fields concerns the application of non intrusive methods in fluid mechanics. Therefore, in multiphase flows, laser diffraction based techniques and the Phase Doppler Anemometry have been used in various flow configurations either open (sprays) or closed (pipe flows). On the other hand, the Laser Doppler Anemometry and PIV habe been used for velocity measurements in single phase flows, mostly in environmental related applications. Another field of interest is the application of Heat Transfer techniques in energy conversion and processing technologies. Finally, in collaboration with the Numerical Methods Group in the Production Engineering Department, a code for the numerical simulation of the non isothermal flow of complex fluids has been developed. This area has been extended through a collaboration with the University of Ontario, Canada, developing parallel computing techniques in Fluid Flow simulation. Currently he has been involved in a collaborative project with Bosch CarMultimedia to develop computing tools to simulate the manufacturing of PCB's. He has been instrumental is developing an area of research in Biomass applications. It is focused in small scale technologies for heat. A competence network has been funded by the Portuguese Innovation Agency (AdI). He his member of the scientific committee of the Renewable Heat and Cooling EU platform.
Identificação

Identificação pessoal

Nome completo
JOSÉ CARLOS FERNANDES TEIXEIRA

Nomes de citação

  • TEIXEIRA, JOSÉ CARLOS

Identificadores de autor

Ciência ID
9F1F-9388-CE55
ORCID iD
0000-0001-8459-1837

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Médica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2005/01/15
Concluído
na (Título de Agregado)
Especialização em Engenharia Mecânica
Universidade do Minho Escola de Engenharia, Portugal
"na" (TESE/DISSERTAÇÃO)
por unanimidade
1989
Concluído
Engenharia Química (Doutoramento)
University of Birmingham, Reino Unido
"Turbulence in Annular Two Phase Flow" (TESE/DISSERTAÇÃO)
NA
1983/09/30
Concluído
Engenharia Metalomecânica (Licenciatura)
Universidade do Minho Escola de Engenharia, Portugal
"Estudo do Comportamento à Fadiga de Juntas Soldadas" (TESE/DISSERTAÇÃO)
17
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2009/05 - Atual Professor Catedrático (Docente Universitário) Universidade do Minho, Portugal
1997/02 - 2009/05 Professor Associado (Docente Universitário) Universidade do Minho, Portugal
1989/01 - 1997/02 Professor Auxiliar (Docente Universitário) Universidade do Minho, Portugal
1983/10 - 1989/01 Assistente Estagiário (Docente Universitário) Universidade do Minho, Portugal

Cargos e Funções

Categoria Profissional
Instituição de acolhimento
Empregador
2013 - 2021 Conselho Cientifico Escola de Engenharia Universidade do Minho, Portugal
2011/01 - 2021 Director Centro de Investigação Universidade do Minho, Portugal
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2016/09 - 2020/09 Director Departamento Universidade do Minho, Portugal
Universidade do Minho Departamento de Engenharia Mecânica, Portugal

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
1996/10 - 1997/08 Mechanical Engn Dpt, University of Wales, Cardiff Cardiff University, Reino Unido
1989/06 - 1989/09 Invited Researcher, AERE Harwell MRC Harwell, Reino Unido
Projetos

Projeto

Designação Financiadores
2020 - 2023/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos – Financiamento Base
UIDB/04077/2020
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020 - 2023/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos – Programático UID
UIDP/04077/2020
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020 - 2023/06 Plasma2Gas - New Energy Level - Gasification System
POCI-01-0247-FEDER-070233
Investigador
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Em curso
2020 - 2023/03 AmbWTE - Biomass &Waste to Energy System
POCI-01-0247-FEDER-039838
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Em curso
2020 - 2023 O3F - Um Framework de Optimização para reduzir os Incêndios Florestais
PCIF/GRF/0141/2019
Investigador
Universidade do Minho Centro ALGORITMI, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2019 - 2022/09 PRIDOP - Innovation in die-casting and Process Optimizations
40271
Investigador
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Agência Nacional de Inovação SA
Em curso
2018 - 2022/06 ThermFire4Woven: Desenvolvimento de estruturas fibrosas avançadas com tratamentos da superfície fibrosa e revestimentos com elevada eficiência térmica e resistência à chama para aplicações de alto valor acrescentado
33637
Investigador
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Em curso
2018 - 2021/07 NHyNUS - Novel Hybrid Nano Ultrasonic Stirring
PTDC/EMEEME/30967/2017
PTDC/EMEEME/30967/2017
Investigador
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2019 - 2021/06 Selective Soldering Simulation – Thermal and Flow
FOF.QC.P39
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Em curso
2018 - 2021 NFsCoolingSystem: An advanced microCooling System based on innovative NanoFluids and acoustic streaming
PTDC/EME-SIS/30171/2017
Investigador
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2019 - 2019/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos
UID/EMS/04077/2019
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2015 - 2018/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos
UID/EMS/04077/2013
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2015 - 2018/06 Advanced Interconnection for High Complexity PCB Assembly
002814/2015
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Concluído
2015 - 2018/06 Advanced Interconnection for High Complexity PCB Assembly
002814/2015
Investigador responsável
Agência Nacional de Inovação SA
Concluído
2013 - 2015/06/30 HMIEXCEL Bosc Car Multimedia- Land Pattern Design by Thermal Simulation
36265/2013
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Concluído
2012 - 2013/12/31 Heat Exchanger Material Replacement
na
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Bosch Termotecnologia
Concluído
2012 - 2013/12/31 Melhoria do desempenho energético de máquina de esterelização de material hospitalar
2011/22931
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Concluído
2012 - 2013/12 Desenvolvimento de uma caldeira a pellets de madeira, dedicada ao aquecimento doméstico
2012/22932
Investigador
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Concluído
2011 - 2012/12 BIOMASUD - Mecanismos de sustentabilidade e valorização do mercado de biomassa sólida no espaço SUDOE
SOE2/P2/E414
Investigador
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
European Union
Concluído
2006 - 2008/06 CEBio - Rede de Competência para a Bioenergia
037/7.1/ADI/NOR
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Agência Nacional de Inovação SA
Concluído
2004 - 2005/12 Computação Avançada em Engenharia
n/a
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2002 - 2005/03 Estudo dos Mecanismos de Combustão na Valorização Energética de Óleos Usados
EME/42121/2001
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
1998 - 2001/10 CLIMEROD - The influence of climate change on coastal sediment erosion
MAS3-CT98-0116
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
European Union
Concluído
1992 - 1995/12 CLOUD - Modelling of two phase release dispersion for hazzard assessment
CT-91/166
Investigador responsável
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
European Union
Concluído
Produções

Publicações

Artigo em conferência
  1. Capela, P.; Souza, M. S.; Costa, S.; Fernandes, M.; Figueiredo, H.; Alves, R.; Delgado, I.; Teixeira, J.; Soares, D.. "Solder Paste Additives for Thermal Expansion Control". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-72478
  2. Mateus, Duarte; Teixeira, Senhorinha; Rodrigues, Nelson; Carvalho, Violeta; Santos, Duarte; Veloso, Joao; Soares, Delfim; Teixeira, Jose. "Numerical Simulation of Solder Paste Printing on Through-Hole Components". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73613
  3. Barbosa, Flavia; Teixeira, Jose; Silva, João; Teixeira, Senhorinha. "Numerical Analysis of Multiple Jets Impinging on a Moving Surface". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73603
  4. Carvalho, Violeta; Rodrigues, Cristina; Minas, Graça; Lima, Rui; Teixeira, Jose C.; Teixeira, Senhorinha. "i9Masks: From a Multidisciplinary Summer Project to a Non-Accredited Short Course". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73495
  5. Silva, João Pedro; Teixeira, Senhorinha; Peters, Bernhard; Teixeira, José Carlos. "Survey of Existing Literature Data on the Biomass Combustion Behavior in Industrial Grate-Fired Boilers". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73567
  6. Vilarinho, Maria Cândida; Araújo, Paulo; Teixeira, José Carlos; Silva, Elisabete; Silveira, Dionisio; Soares, Delfim; Paiva, Maria C.; Ribeiro, Daniel; Branco, Marisa. "Influence of Coating on High Performance Heat Resistant Textile Curtains". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73307
  7. Oliveira, Victor; Castro, Fernando; Teixeira, Jose Carlos; Araujo, Jorge; Ribeiro, Andre; Carvalho, Joana; Vilarinho, Maria Cândida. "Physicochemical Characterization of the Rejected Waste From the Mechanical and Biological Treatment of Municipal Solid Waste". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73595
  8. Carvalho, Violeta; Carneiro, Filipa; Ferreira, Ana C.; Gama, Vasco; Teixeira, Senhorinha; Teixeira, Jose C.. "Steady Flow Studies of the Geometry Effects on the Recirculation Properties at the Iliac Bifurcation". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73450
  9. Silva, João; Guedes, Vitor; Teixeira, Senhorinha; Lobarinhas, Pedro; Teixeira, José Carlos; Rodrigues, Nelson. "Numerical Simulation of the Flow Inside a Horizontal Closed Refrigerated Display Cabinet". Trabalho apresentado em ASME IMECE, 2021.
    10.1115/imece2021-73589
  10. Araujo, P.; Teixeira, J.C.; Silveira, D.; Silva, E.; Soares, D.; Fangueiro, R.; Vilarinho, M.C.. "Development of fiber structures for high performance heat resistant curtains". Trabalho apresentado em asme imece, 2020.
    10.1115/IMECE2020-24016
  11. Barbosa, F.; Teixeira, S.; Costa, C.; Marques, F.; Teixeira, J.C.. "Experimental study of multiple air jets impinging a moving flat plate". Trabalho apresentado em ASME IMECE, 2020.
    10.1115/IMECE2020-23996
  12. Ferreira, A.C.; Teixeira, S.F.C.F.; Teixeira, J.C.F.; Nebra, S.A.. "Analysis of the cost and energy value of forest biomass production: From harvest to end-use". 2020.
  13. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Experimental study of multiple jets impinging a flat surface". 2020.
  14. Antunes, P.; Ferreira, M.E.; Vilarinho, M.C.; Teixeira, J.C.. "Energy Analysis and Waste Valorization in a Kraft Paper Plant". Trabalho apresentado em ASME IMECE, 2020.
    10.1115/IMECE2020-24002
  15. Vinha, M.I.; Silva, J.; Teixeira, S.; Gomes, A.; Teixeira, J.C.. "Numerical study of the flow inside a modular bag filter from a biomass power plant". 2020.
    10.1115/IMECE2020-23484
  16. Vinha, Maria Inês; Silva, João; Teixeira, Senhorinha; Gomes, Ana; Teixeira, José Carlos; Maria Inês Vinha; João Silva; et al. "Numerical Study of the Flow Inside a Modular Bag Filter From a Biomass Power Plant". Trabalho apresentado em ASME IMECE, 2020.
    10.1115/imece2020-23484
  17. Barbosa, Flavia; Teixeira, Senhorinha; Costa, Carlos; Marques, Filipe; Teixeira, José Carlos; Flavia Barbosa; Senhorinha Teixeira; et al. "Experimental Study of Multiple Air Jets Impinging a Moving Flat Plate". Trabalho apresentado em ASME IMECE, 2020.
    10.1115/imece2020-23996
  18. Araujo, Paulo; Teixeira, José Carlos; Silveira, Dionisio; Silva, Elisabete; Soares, Delfim; Fangueiro, Raul; Vilarinho, Maria Cândida; et al. "Development of Fiber Structures for High Performance Heat Resistant Curtains". Trabalho apresentado em ASME IMECE, 2020.
    10.1115/imece2020-24016
  19. Antunes, Pedro; Ferreira, Manuel Eduardo; Vilarinho, Maria Cândida; Teixeira, José Carlos; Pedro Antunes; Manuel Eduardo Ferreira; Maria Cândida Vilarinho; José Carlos Teixeira. "Energy Analysis and Waste Valorization in a Kraft Paper Plant". Trabalho apresentado em ASME IMECE, 2020.
    10.1115/imece2020-24002
  20. Ferreira, A.C.; Teixeira, S.F.C.F.; Oliveira, R.F.; Teixeira, J.C.. "CFD simulation of an Alfa-Stirling engine to study the geometrical parameters on the engine performance". 2019.
    10.1115/IMECE2019-11542
  21. Soares, D.F.; Ribeiro, P.E.; Capela, P.; Barros, D.A.; Cerqueira, M.F.; Teixeira, S.; Macedo, F.; Teixeira, J.C.. "Influence of the applied load on the creep behaviour of tin-silver-copper solder". 2019.
    10.1115/IMECE2019-11356
  22. Couto, D.M.; Gonçalves, M.M.; Carvalho, J.; Ferreira, M.E.; Araújo, J.; Teixeira, J.C.; Vilarinho, C.. "Combustion of biomass based pellets with pyrolysis bio-oils". 2019.
    10.1115/IMECE2019-11593
  23. Barbosa, F.V.; Costa, C.A.P.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Measurement errors and uncertainty estimation of an experimental set up using a 2D PIV technique". 2019.
    10.1115/IMECE2019-11652
  24. Lopes, D.; Puga, H.; Teixeira, J.. "Numerical study of blood flow in stented arteries: Comparison of stent designs and viscosity models". 2019.
    10.1109/ENBENG.2019.8692571
  25. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Numerical analysis of the influence of the jet-to-jet spacing between two adjacent air jets impinging a flat plate". 2019.
    10.1615/TFEC2019.nmf.028498
  26. Ferreira, A.C.; Teixeira, S.; Teixeira, J.C.; Nebra, S.A.. "Thermal energy storage for concentrated solar systems: A technical review and economic considerations". 2019.
  27. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Influence of the nozzle-to-plate distance in a jet impinging a cold plate – a numerical approach". 2019.
  28. Ferreira, A.C.; Silva, J.; Teixeira, S.; Teixeira, J.C.; Nebra, S.. "Analysis of the different renewable energy sources in the performance of a Stirling engine". 2019.
  29. Silva, J.; Fraga, L.; Ferreira, M.E.; Chapela, S.; Porteiro, J.; Teixeira, S.F.C.F.; Teixeira, J.. "Combustion modelling of a 20 kW pellet boiler". 2018.
    10.1115/IMECE2018-88063
  30. Esteves, D.; Vilarinho, C.; Ferreira, M.E.; Carvalho, J.; Araújo, J.; Teixeira, J.. "Energy and exergy analysis of a biomass based ceramic plant". 2018.
    10.1115/IMECE2018-88046
  31. Barbosa, F.V.; Teixeira, J.C.F.; Vilarinho, M.C.L.G.; Araújo, J.M.M.G.. "Gasification of RDF from MSW—an overview". 2018.
    10.1201/9781315206172-53
  32. Oliveira, R.F.; Rodrigues, N.; Teixeira, J.C.; Santos, D.; Soares, D.; Cerqueira, M.F.; Teixeira, S.F.C.F.. "A numerical study of solder paste rolling process for PCB printing". 2018.
    10.1115/IMECE2018-88035
  33. Ribeiro, P.E.; Barros, D.A.; Soares, D.F.; Teixeira, J.C.; Cerqueira, M.F.; Capela, P.; Teixeira, S.F.; Macedo, F.. "Influence of the microstructure on the creep behaviour of tin-silver-copper solder". 2018.
    10.1115/IMECE2018-87789
  34. Barbosa, F.V.; Silva, J.P.V.; Ribeiro, P.E.A.; Teixeira, S.F.C.F.; Soares, D.F.; Santos, D.; Cerqueira, M.F.; Teixeira, J.C.F.. "An experimental setup for multiple air jet impingement over a surface". 2018.
  35. Brito, F.P.; Pacheco, N.; Vieira, R.; Martins, J.; Martins, L.; Teixeira, J.; Goncalves, L.M.; Oliveira, J.; Hall, M.. "Efficiency improvement of vehicles using temperature controlled exhaust thermoelectric generators". 2018.
  36. Ferreira, A.C.; Teixeira, S.; Teixeira, J.C.; Nebra, S.. "Application of Cost-Benefit analysis to identify the potential of small-scale cogeneration systems in portuguese building sector". 2018.
  37. Silva, J.; Teixeira, J.; Teixeira, S.; Chapela, S.; Porteiro, J.. "Application of a biomass combustion model to an industrial boiler". 2018.
  38. Fraga, L.G.; Silva, J.; Teixeira, J.C.F.; Ferreira, M.E.C.; Soares, D.F.; Teixeira, S.F.. "The effect of the heating and air flow rate on the mass loss of pine wood particles". 2018.
  39. Barbosa, F.V.; Silva, J.P.V.; Teixeira, S.F.C.F.; Soares, D.F.; Santos, D.N.F.S.; Delgado, I.A.C.C.F.; Teixeira, J.C.F.. "Multiple jet impingement in reflow soldering - A numerical approach". 2018.
  40. Fraga, L.; Silva, J.; Soares, D.F.; Ferreira, M.; Teixeira, S.F.; Teixeira, J.C.. "Study of devolatilization rates of pine wood and mass loss of wood pellets". 2017.
    10.1115/IMECE2017-71939
  41. Vilarinho, C.; Ribeiro, A.; Carvalho, J.; Araújo, J.; Ferreira, M.E.; Teixeira, J.. "Development of a methodology for paint dust waste energetic valorization trough RDF production". 2017.
    10.1115/IMECE2017-71979
  42. Ferreira, A.C.; Teixeira, S.F.C.F.; Teixeira, J.C.; Martins, L.A.B.. "Parametric analysis of the thermal components of an alpha-stirling engine for cogeneration applications". 2017.
    10.1115/IMECE2017-71313
  43. Ribeiro, P.E.; Soares, D.F.; Cerqueira, M.F.; Teixeira, S.F.; Barros, D.A.; Teixeira, J.C.. "Creep behavior of a solder paste with Bi addition". 2017.
    10.1115/IMECE2017-71532
  44. Barbosa, F.V.; Ribeiro, P.E.A.; Cerqueira, M.F.; Soares, D.F.; Teixeira, J.C.F.; Teixeira, S.F.C.F.; Lima, R.A.M.M.; Pinho, D.M.D.. "Rheology characterization of solder paste". 2017.
    10.1115/IMECE2017-71413
  45. Vilarinho, C.; Teixeira, J.; Araújo, J.; Carvalho, J.. "Effect of time and acid concentration on metal extraction from galvanic sludges". 2017.
    10.1115/IMECE2017-71370
  46. Silva, J.; Teixeira, J.; Teixeira, S.; Preziati, S.; Cassiano, J.. "CFD Modeling of Combustion in Biomass Furnace". 2017.
    10.1016/j.egypro.2017.07.179
  47. Ferreira, A.C.; Martins, L.A.S.B.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Modelling stirling engines for CHP applications: Analysis of the mechanical and thermal losses". 2017.
  48. Oliveira, R.F.; Teixeira, S.F.; Marques, H.M.C.; Teixeira, J.C.. "A correlative cfd study between recirculation area and fpm in VHC design". 2016.
    10.1115/IMECE2016-67329
  49. Silva, J.; Preziati, S.; Teixeira, S.F.; Teixeira, J.C.. "Energy and exergy analysis of a biomass power plant". 2016.
    10.1115/IMECE2016-66899
  50. Ferreira, A.C.; Teixeira, S.F.C.F.; Oliveira, R.F.; Rodrigues, N.J.; Teixeira, J.C.F.; Soares, D.. "CFD modeling the cooling stage of reflow soldering process". 2016.
    10.1115/IMECE201666447
  51. Teixeira, J.C.F.; Teixeira, S.F.C.F.; Cunha, P.; Silva, A.M.. "Thermal driven dispersion of smoke in a parking space". 2016.
    10.1115/IMECE201667498
  52. Ferreira, A.C.; Nunes, M.L.; Martins, L.A.S.B.; Teixeira, S.F.C.F.; Teixeira, J.C.F.; Nebra, S.A.. "Thermal-economic design of a solar dish stirling cogeneration system using a multi-objective approach". 2016.
  53. Oliveira, R.F.; Marques, H.M.C.; Machado, A.V.; Teixeira, J.C.; Teixeira, S.F.. "VHC performance evaluation at constant flow: 30 L/MIN". 2015.
    10.1115/IMECE201552283
  54. Costa, J.; Soares, D.; Teixeira, S.F.; Cerqueira, F.; Macedo, F.; Rodrigues, N.; Ribas, L.; Teixeira, J.C.. "Modeling the reflow soldering process in PCB'S". 2015.
    10.1115/IPACK2015-48720
  55. Ferreira, A.C.; Teixeira, S.; Teixeira, J.C.; Martins, L.B.. "Design optimization of a solar dish collector for its application with stirling engines". 2015.
    10.1115/IMECE2015-52241
  56. Ferreira, A.C.; Vaz, A.I.F.; Teixeira, S.F.; Teixeira, J.C.. "Thermal-economic design of a micro-gas turbine CHP system using a multi-objective optimization approach". 2015.
  57. Sá, A.C.; Teixeira, S.; Teixeira, J.C.. "Modelling the air-fuel mixture in an atmospheric burner". 2015.
  58. Ferreira, J.; Teixeira, J.C.F.; Ferreira, M.E.C.; Araújo, J.. "Quality requirements for the biomass in the SUDOE region". 2015.
  59. Nobre, C.; Gonçalves, M.; Mendes, B.; Vilarinho, C.; Teixeira, J.. "Torrefaction effects on composition and quality of biomass wastes pellets". 2015.
  60. Ferreira, A.C.; Nunes, M.L.; Teixeira, J.C.; Martins, L.B.; Teixeira, S.F.. "Thermodynamic and economic optimization of a solar-powered stirling engine for micro-cogeneration purposes". 2015.
  61. TEIXEIRA, JOSÉ; Oliveira, R.F.; Teixeira, S.F.; Cabral-Marques, H.; Teixeira, J.C.. "Flow Recirculation in VHC Designs". 2014.
  62. Teixeira, S.; Oliveira, R.F.; Rodrigues, N.; Miguel, A.S.; Teixeira, J.C.; Santos Baptista, J.; TEIXEIRA, JOSÉ. "One-way coupling between a CFD model and a transient thermal model of the human body". 2014.
  63. Teixeira, S.; Falcão, E.; Rodrigues, N.; Teixeira, J.C.. "Sensibility studies on a transient thermal model of the human body". 2014.
    10.1109/ICCSA.2014.40
  64. Teixeira, J.; Martins, L.S.B.; Lopes, M.; Teixeira, S.F.; Ferreira, M.E.. "Two stage atmospheric burners: Development and verification of a new mass-energy balance model". 2014.
    10.1115/IMECE2014-38820
  65. Almeida, C.; Nunes, A.A.; Teixeira, S.; Teixeira, J.C.; Lobarinhas, P.. "Jet interaction in cross flow: Experimental and numerical model". 2014.
    10.1115/IMECE2014-38993
  66. Oliveira, R.F.; Silva, M.V.; Machado, A.V.; Oliveira, M.; Cabral-Marques, H.M.; Teixeira, S.F.; Teixeira, J.C.. "Experimental assessment of Emitted Dose from Valved Holding Chamber devices". 2014.
    10.1115/IMECE201438846
  67. Cunha, A.M.; Campos, V.A.; Teixeira, J.C.; Teixeira, S.. "Indoor ventilation in Hospital operating rooms". 2014.
    10.1109/ICCSA.2014.32
  68. Arcipreste, B.; Ribas, L.; Soares, D.; Teixeira, J.C.. "Numerical modeling of wave soldering in PCB". 2014.
    10.1115/IMECE2014-39051
  69. Teixeira, J.C.; Oliveira, A.C.; Teixeira, S.F.. "Thermal hydraulic modeling of shell and tube heat exchangers". 2014.
    10.1615/ihtc15.cpm.009525
  70. Teixeira, S.F.C.F.; Rodrigues, N.N.J.O.; Miguel, A.S.; Oliveira, R.F.; Teixeira, J.C.F.; Baptista, J.S.. "Modeling the thermal environment in an operating room". 2014.
    10.1615/ihtc15.cnv.009593
  71. TEIXEIRA, JOSÉ. "An Experimental Setup for API Assessment of a Valved Holding Chamber Device". 2013.
    10.1115/IMECE2013-65111
  72. TEIXEIRA, JOSÉ. "Thermal-Economic Modelling of a Micro-CHP Unit Based on a Stirling Engine". 2013.
    10.1115/IMECE2013-65126
  73. Costa, J.P.M.; Teixeira, J.C.F.; Silva, L.F.; Teixeira, S.F.C.T.. "Experimental analysis of particles flow inside the volumatic® spacer". 2013.
    10.2495/BIO130031
  74. Oliveira, R.F.; Ferreira, A.C.; Teixeira, S.F.; Teixeira, J.C.; Marques, H.C.. "PMDI spray plume analysis: ACFD study". 2013.
  75. TEIXEIRA, JOSÉ. "Teaching Heat Exchanger Design in Mechanical Engineering with CFD". 2013.
    10.1115/FEDSM2013-16240
  76. TEIXEIRA, JOSÉ. "pMDI Spray Plume Analysis: A CFD Study". 2013.
  77. TEIXEIRA, JOSÉ; Rodrigues, N.J.O.; Teixeira, S.F.C.F.; Miguel, A.S.; Oliveira, R.F.; Teixeira, J.C.F.; Santos Baptista, J.. "Thermal comfort evaluation of an operating room through CFD methodology". 2013.
  78. TEIXEIRA, JOSÉ. "Ash Sintering in a Biomass Pellet Boiler". 2013.
    10.1115/IMECE2013-65246
  79. TEIXEIRA, JOSÉ. "Exergy Efficiency Optimization for Gas Turbine Based Cogeneration Systems". 2013.
    10.1115/IMECE2013-65080
  80. TEIXEIRA, JOSÉ. "Flow Structure Over a Simulated Bed for Coastal Coehsive Sediment Erosion Studies". 2013.
    10.1115/FEDSM2013-16243
  81. TEIXEIRA, JOSÉ. "CFD Simulation of Two-Phase Flow in a Large Scale Venturi Scrubber". 2013.
    10.1115/FEDSM2013-16255
  82. Teixeira, J.C.; Ferreira, R.; Seabra, E.A.; Ferreira, M.E.. "Development and optimization of a small scale pellet burner". 2012.
    10.1115/IMECE2012-88381
  83. TEIXEIRA, JOSÉ. "Modelling Flow recirculation Inside a Holding Chamber". 2012.
    10.1115/IMECE2012-88242
  84. Loureiro, I.F.; Costa, F.; Teixeira, J.; Leão, C.P.; Arezes, P.M.. "Etdanalyser: A model-based architecture for ergonomic decision intervention". 2012.
  85. TEIXEIRA, JOSÉ. "Modeling a Stirling Engine for Cogeneration Applications". 2012.
    10.1115/IMECE2012-88183
  86. Ferreira, A.C.M.; Nunes, M.L.; Teixeira, S.F.C.F.; Leão, C.P.; Silva, A.M.; Teixeira, J.C.F.; Martins, L.A.S.B.. "An economic perspective on small-scale cogeneration systems optimisation". 2011.
  87. Teixeira, S.; Oliveira, R.; Rodrigues, N.; Miguel, A.S.; Teixeira, J.C.. "Experimental validation of a CFD model in a thermal environment characterization". 2011.
  88. Martins, L.B.; Ferreira, A.C.M.; Nunes, M.L.; Leño, C.P.; Teixeira, S.F.C.F.; Marques, F.; Teixeira, J.C.F.. "Optimal design of micro-turbine cogeneration systems for the portuguese buildings sector". 2011.
  89. Martins, L.A.B.; Reis, M.A.; Ferreira, M.E.; Teixeira, J.C.. "Drying kinetics of solid biomass". 2011.
  90. Ferreira, A.C.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Contributions to the study of blood flow in the abdominal aorta and its branches". 2010.
    10.1115/IMECE2009-13028
  91. Cunha, A.M.F.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Computational fluid dynamics applicable to cloth design". 2010.
    10.1115/IMECE2009-13042
  92. Vilarinho, M.C.L.G.; Gonçalves, N.M.B.; Teixeira, J.C.F.. "Optimization of a leaching tank for hydrometallurgical recovery of metals". 2010.
    10.1115/IMECE2009-12926
  93. Oliveira, R.F.; Teixeira, S.F.C.F.; Silva, L.F.; Teixeira, J.C.; Antunes, H.. "Design and development of a new valve geometry for spacer devices". 2010.
    10.1115/IMECE2010-39211
  94. Teixeira, J.C.; Ferreira, R.; Ferreira, M.E.. "Optimization of a small scale pellet boiler". 2010.
    10.1115/IMECE2010-39263
  95. Silva, L.F.; Rebelo, R.; Teixeira, S.; Oliveira, R.; Teixeira, J.C.; Antunes, H.. "Study and development of spacers for pressurized inhaler devices: A project review". 2010.
    10.1115/IMECE2009-13171
  96. Teixeira, J.C.F.; Vasconcelos, B.N.; Ferreira, M.E.C.. "Simulation of a small scale pellet boiler". 2010.
    10.1115/IMECE2009-11133
  97. Ferreira, A.C.M.; Madureira, F.; Nunes, M.L.; Teixeira, S.F.C.F.; Leão, C.P.; Teixeira, J.C.F.; Martins, L.B.. "Development and evaluation of a micro-cogeneration prototype for residential applications". 2010.
    10.1115/IMECE2010-39192
  98. Carneiro, F.; Silva, A.E.; Teixeira, S.F.C.F.; Teixeira, J.C.F.; Lobarinhas, P.A.M.; Ribeiro, V.G.. "The influence of renal branches on the iliac arteries blood flow". 2008.
  99. Teixeira, J.C.F.; Silva, J.C.L.F.; Flores, P.. "Development of mechanical engineering curricula at the university of minho". 2006.
    10.1115/IMECE2006-15170
  100. Lobarinhas, P.A.M.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Development of an experimental facility to test polymer extrusion". 2006.
    10.1115/IMECE2006-14428
  101. Neves, M.M.; Cunha, J.L.; Arezes, P.M.; Leão, C.P.; Teixeira, S.F.C.F.; Lobarinhas, P.; Teixeira, J.C.. "IN2TEC - A multidisciplinary research project involving researchers, students and industry". 2006.
  102. Lobarinhas, P.A.M.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "A numerical study of the thermal behavior of calibrators for polymer". 2006.
  103. Barros, I.; Cunha, A.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Simplified model for the thermal boundary condition in polymer injection". 2005.
    10.1115/HT2005-72654
  104. Ferreira, M.E.C.; Martins, J.J.G.; Teixeira, J.C.F.. "Optimization of an effervescent atomizer in the combustion of residue oils". 2005.
    10.1115/HT2005-72427
  105. Teixeira, J.C.F.; Teixeira, S.F.C.F.; Silva, Â.M.E.. "Numerical optimization of a gas turbine cogeneration plant". 2003.
    10.1115/GT2003-38143
  106. Haie, N.; Machado, G.J.; Fortunas, F.C.; Teixeira, J.C.; Martins, J.B.; TEIXEIRA, JOSÉ. "Evaluation and comparison of BEM, FEM and FDM for the solution of some engineering problems". 1996.
    10.2495/BE960191
  107. Azzopardi, B.J.; Teixeira, J.C.F.. "Gas core turbulence and drop velocities in vertical annular two phase flow". 1992.
  108. Teixeira, J.C.F.; Azzopardi, B.J.; Bott, T.R.. "Measurement of turbulence in the gas core of annular two phase flow". 1989.
Artigo em revista
  1. Barbosa, Flavia V; Lobarinhas, Pedro AM; Teixeira, Senhorinha FCF; Teixeira, José CF. "Project-Based Learning in a Mechanical Engineering Course: A new proposal based on student's views". International Journal of Mechanical Engineering Education (2022): 030641902210782. http://dx.doi.org/10.1177/03064190221078259.
    10.1177/03064190221078259
  2. Lopes, V.; Puga, H.; Gomes, I.V.; Peixinho, N.; Teixeira, J.C.; Barbosa, J.. "Magnesium stents manufacturing: Experimental application of a novel hybrid thin-walled investment casting approach". Journal of Materials Processing Technology 299 (2022): 117339. http://dx.doi.org/10.1016/j.jmatprotec.2021.117339.
    10.1016/j.jmatprotec.2021.117339
  3. Vieira, Duarte Nuno; Lima, Luisa; Santos, Duarte; Teixeira, Senhorinha F.C.F; Teixeira, Jose Carlos. Autor correspondente: Vieira, Duarte Nuno. "The effect of acrylic conformal coating in the reliability of solder joints". IEEE Transactions on Components, Packaging and Manufacturing Technology (2022): 1-1. http://dx.doi.org/10.1109/tcpmt.2022.3163687.
    10.1109/tcpmt.2022.3163687
  4. Silva, João Pedro; Teixeira, Senhorinha; Grilo, Élson; Peters, Bernhard; Teixeira, José Carlos. "Analysis and monitoring of the combustion performance in a biomass power plant". Cleaner Engineering and Technology 5 (2021): 100334. http://dx.doi.org/10.1016/j.clet.2021.100334.
    10.1016/j.clet.2021.100334
  5. Souza, R.R.; Faustino, Vera; Oliveira, J.D.; Gonçalves, Inês M.; Miranda, João M.; Moita, Ana S.; Moreira, A.L.N.; et al. "A novel and extremely stable nanofluid based on iron oxide nanoparticles: Experimental investigations on the thermal performance". Thermal Science and Engineering Progress 26 (2021): 101085. http://dx.doi.org/10.1016/j.tsep.2021.101085.
    10.1016/j.tsep.2021.101085
  6. Flavia V. Barbosa; Senhorinha F. C. F. Teixeira; TEIXEIRA, JOSÉ CARLOS. Autor correspondente: Flavia V. Barbosa. "Experimental and Numerical Study of Multiple Jets Impinging a Step Surface". Energies 14 20 (2021): 6659-6659. https://doi.org/10.3390/en14206659.
    10.3390/en14206659
  7. Vieira, Duarte Nuno; Lima, Ana; Santos, Duarte; Rodrigues, Nélson; Carvalho, Violeta; Puga, Hélder; Teixeira, Senhorinha F. C. F; Teixeira, José Carlos. "Prediction of Solder Joint Reliability with Applied Acrylic Conformal Coating". Journal of Electronic Materials 51 1 (2021): 273-283. http://dx.doi.org/10.1007/s11664-021-09232-9.
    10.1007/s11664-021-09232-9
  8. Lopes, D.; Agujetas, R.; Puga, H.; Teixeira, J.; Lima, R.; Alejo, J.P.; Ferrera, C.. "Analysis of finite element and finite volume methods for fluid-structure interaction simulation of blood flow in a real stenosed artery". International Journal of Mechanical Sciences 207 (2021): 106650. http://dx.doi.org/10.1016/j.ijmecsci.2021.106650.
    10.1016/j.ijmecsci.2021.106650
  9. Castro, Carlos; Fraga, Lelis; Ferreira, Eduardo; Martins, Jorge; Ribeiro, Pedro; Teixeira, José C.. "Experimental Studies on Wood Pellets Combustion in a Fixed Bed Combustor Using Taguchi Method". Fuels 2 4 (2021): 376-392. http://dx.doi.org/10.3390/fuels2040022.
    10.3390/fuels2040022
  10. H. Puga; J. Barbosa; V.H. Carneiro; F.V. Barbosa; J.C. Teixeira. "Optimizing high-volume ultrasonic melt degassing using synchronized kinematic translation". Journal of Materials Research and Technology 14 (2021): 2832-2844. https://doi.org/10.1016/j.jmrt.2021.08.098.
    10.1016/j.jmrt.2021.08.098
  11. Barbosa, Flávia V.; Sousa, Sérgio D.T.; Teixeira, Senhorinha F.C.F.; Teixeira, José C.F.. "Application of Taguchi Method for the Analysis of a Multiple Air Jet Impingement System with and without Target Plate Motion". International Journal of Heat and Mass Transfer 176 (2021): 121504. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.121504.
    10.1016/j.ijheatmasstransfer.2021.121504
  12. Violeta Carvalho; Filipa Carneiro; Ana C. Ferreira; Vasco Gama; José C. Teixeira; Senhorinha Teixeira. "Numerical Study of the Unsteady Flow in Simplified and Realistic Iliac Bifurcation Models". Fluids 6 8 (2021): 284-284. https://doi.org/10.3390/fluids6080284.
    10.3390/fluids6080284
  13. Carvalho, Violeta; Arcipreste, Bruno; Soares, Delfim; Ribas, Luís; Rodrigues, Nelson; Teixeira, Senhorinha; Teixeira, José C.. "Experimental measurements of the shear force on surface mount components simulating the wave soldering process". Soldering & Surface Mount Technology 34 1 (2021): 16-23. http://dx.doi.org/10.1108/ssmt-12-2020-0057.
    10.1108/ssmt-12-2020-0057
  14. Silva, João; Ferreira, Ana Cristina; Teixeira, Senhorinha; Martins, Luís; Ferreira, Eduardo; Teixeira, José Carlos. "Sawdust drying process in a large-scale pellets facility: An energy and exergy analysis". Cleaner Environmental Systems 2 (2021): 100037. http://dx.doi.org/10.1016/j.cesys.2021.100037.
    10.1016/j.cesys.2021.100037
  15. José Grilo; Vítor Hugo Carneiro; José Carlos Teixeira; Hélder Puga. "Manufacturing Methodology on Casting-Based Aluminium Matrix Composites: Systematic Review". Metals 11 3 (2021): 436-436. https://doi.org/10.3390%2Fmet11030436.
    10.3390/met11030436
  16. TEIXEIRA, JOSÉ CARLOS. "Application of a cost-benefit model to evaluate the investment viability of the small-scale cogeneration systems in the Portuguese context". International Journal of Sustainable Energy Planning and Management (2021): Vol. 30 (2021)-Vol. 30 (2021). https://journals.aau.dk/index.php/sepm/article/view/5400.
    10.5278/IJSEPM.5400
  17. Violeta Carvalho; Diana Pinho; Rui A. Lima; José Carlos Teixeira; Senhorinha Teixeira. "Blood Flow Modeling in Coronary Arteries: A Review". Fluids 6 2 (2021): 53-53. https://doi.org/10.3390%2Ffluids6020053.
    10.3390/fluids6020053
  18. TEIXEIRA, JOSÉ CARLOS; Flavia Barbosa; Carlos Costa; Senhorinha Teixeira; Jose Carlos Teixeira. "Measurement Errors and Uncertainty Quantification of a 2D-PIV Experimental Setup for Jet Flow Characterization". ASME J. Risk Uncertainty Part B (2020): https://doi.org/10.1115%2F1.4047649.
    https://doi.org/10.1115/1.4047649
  19. Violeta Carvalho; Nelson Rodrigues; Ricardo Ribeiro; Pedro F. Costa; José C. F. Teixeira; Rui A. Lima; Senhorinha F. C. F. Teixeira. "Hemodynamic study in 3D printed stenotic coronary artery models: experimental validation and transient simulation". Computer Methods in Biomechanics and Biomedical Engineering (2020): https://doi.org/10.1080/10255842.2020.1842377.
    10.1080/10255842.2020.1842377
  20. Lelis Gonzaga Fraga; João Silva; Senhorinha Teixeira; Delfim Soares; Manuel Ferreira; José Teixeira. "Thermal Conversion of Pine Wood and Kinetic Analysis under Oxidative and Non-Oxidative Environments at Low Heating Rate". Proceedings 58 1 (2020): 23-23. https://doi.org/10.3390%2Fwef-06921.
    10.3390/wef-06921
  21. Roberto Magalhães; Senhorinha Teixeira; Manuel Ferreira; José Teixeira. "Influence of Plate Orifice in the Pre-Mixing of Gas-Powered Water Heaters". Proceedings 58 1 (2020): 17-17. https://doi.org/10.3390%2Fwef-06930.
    10.3390/wef-06930
  22. Lopes, V.; Puga, H.; Barbosa, J.; Teixeira, J.C.. "Effect of Yttria Mould Coating on the Investment Casting of AZ91D-1 wt% CaO Magnesium Alloy". International Journal of Metalcasting 14 1 (2020): 98-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066031282&partnerID=MN8TOARS.
    10.1007/s40962-019-00339-8
  23. Brito, F.P.; Pacheco, N.; Vieira, R.; Martins, J.; Martins, L.; Teixeira, J.; Goncalves, L.M.; Oliveira, J.; Hall, M.J.. "Efficiency improvement of vehicles using temperature controlled exhaust thermoelectric generators". Energy Conversion and Management 203 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85075467361&partnerID=MN8TOARS.
    10.1016/j.enconman.2019.112255
  24. Soares, D.; Sarmento, M.; Barros, D.; Peixoto, H.; Figueiredo, H.; Alves, R.; Delgado, I.; Teixeira, J.C.; Cerqueira, F.. "The effect of Bi addition on the electrical and microstructural properties of SAC405 soldered structure". Soldering and Surface Mount Technology (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082794969&partnerID=MN8TOARS.
    10.1108/SSMT-10-2019-0029
  25. Ferreira, A.C.; Silva, J.; Teixeira, S.; Teixeira, J.C.; Nebra, S.A.. "Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass". Renewable Energy 154 (2020): 581-597. http://www.scopus.com/inward/record.url?eid=2-s2.0-85081984371&partnerID=MN8TOARS.
    10.1016/j.renene.2020.03.020
  26. Grilo, J.; Puga, H.; Carneiro, V.H.; Tohidi, S.D.; Barbosa, F.V.; Teixeira, J.C.. "Effect of hybrid ultrasonic and mechanical stirring on the distribution of m-SiCp in A356 alloy". Metals 10 5 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85084368362&partnerID=MN8TOARS.
    10.3390/met10050610
  27. Fraga, L.G.; Silva, J.; Teixeira, S.; Soares, D.; Ferreira, M.; Teixeira, J.. "Influence of operating conditions on the thermal behavior and kinetics of pine wood particles using thermogravimetric analysis". Energies 13 11 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090874248&partnerID=MN8TOARS.
    10.3390/en13112756
  28. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Experimental and numerical analysis of the influence of the nozzle-to-plate distance in a jet impingement process". International Journal of Thermodynamics 23 2 (2020): 81-91. http://www.scopus.com/inward/record.url?eid=2-s2.0-85090790680&partnerID=MN8TOARS.
    10.5541/ijot.653527
  29. Lopes, D.; Puga, H.; Teixeira, J.; Lima, R.. "Blood flow simulations in patient-specific geometries of the carotid artery: A systematic review". Journal of Biomechanics 111 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090402327&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2020.110019
  30. Lopes, D.; Puga, H.; Teixeira, J.C.; Teixeira, S.F.. "Fluid–Structure Interaction study of carotid blood flow: Comparison between viscosity models". European Journal of Mechanics, B/Fluids 83 (2020): 226-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-85085650280&partnerID=MN8TOARS.
    10.1016/j.euromechflu.2020.05.010
  31. José Lopes; João Silva; Senhorinha Teixeira; José Teixeira. "Numerical Modeling and Optimization of an Air Handling Unit". Energies 14 1 (2020): 68-68. https://doi.org/10.3390%2Fen14010068.
    10.3390/en14010068
  32. Ana Cristina Ferreira; Angela Silva; José Carlos Teixeira; Senhorinha Teixeira. "Multi-Objective Optimization of Solar Thermal Systems Applied to Portuguese Dwellings". Energies 13 24 (2020): 6739-6739. https://doi.org/10.3390%2Fen13246739.
    10.3390/en13246739
  33. Teixeira, J.C.F.; Østergaard, P.A.. "Development in efficiency, cost, optimization, simulation and environmental impact of energy systems". International Journal of Sustainable Energy Planning and Management 22 (2019): 1-4. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071021305&partnerID=MN8TOARS.
    10.5278/ijsepm.3359
  34. Barbosa, F.V.; Teixeira, J.C.F.; Teixeira, S.F.C.F.; Lima, R.A.M.M.; Soares, D.F.; Pinho, D.M.D.. "Rheology of F620 solder paste and flux". Soldering and Surface Mount Technology 31 2 (2019): 125-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-85058845208&partnerID=MN8TOARS.
    10.1108/SSMT-08-2018-0027
  35. Fraga, L.G.; Teixeira, J.C.F.; Ferreira, M.E.C.. "The potential of renewable energy in timor-leste: An assessment for biomass". Energies 12 8 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85065715700&partnerID=MN8TOARS.
    10.3390/en12081441
  36. Vasconcelos, B.; Teixeira, J.C.; Dragone, G.; Teixeira, J.A.. "Oleaginous yeasts for sustainable lipid production—from biodiesel to surf boards, a wide range of “green” applications". Applied Microbiology and Biotechnology (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85064091879&partnerID=MN8TOARS.
    10.1007/s00253-019-09742-x
  37. Lopes, D.; Puga, H.; Teixeira, J.C.; Teixeira, S.F.. "Influence of arterial mechanical properties on carotid blood flow: Comparison of CFD and FSI studies". International Journal of Mechanical Sciences 160 (2019): 209-218. http://www.scopus.com/inward/record.url?eid=2-s2.0-85067870110&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2019.06.029
  38. Soares, D.; Leitão, H.; Lau, C.S.; Teixeira, J.C.; Ribas, L.; Alves, R.; Teixeira, S.; Cerqueira, M.F.; Macedo, F.. "Effect of the Soldering Atmosphere on the Wettability Between Sn4.0Ag0.5Cu (in wt.%) Lead-Free Solder Paste and Various Substrates". Journal of Materials Engineering and Performance 27 10 (2018): 5011-5017. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047664049&partnerID=MN8TOARS.
    10.1007/s11665-018-3419-2
  39. Vasconcelos, B.; Teixeira, J.C.; Dragone, G.; Teixeira, J.A.. "Optimization of lipid extraction from the oleaginous yeasts Rhodotorula glutinis and Lipomyces kononenkoae". AMB Express 8 1 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85051239127&partnerID=MN8TOARS.
    10.1186/s13568-018-0658-4
  40. Ferreira, A.C.; Nunes, M.L.; Teixeira, J.C.F.; Martins, L.A.S.B.; Teixeira, S.F.C.F.; Nebra, S.A.. "Design of a solar dish Stirling cogeneration system: Application of a multi-objective optimization approach". Applied Thermal Engineering 123 (2017): 646-657. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020017721&partnerID=MN8TOARS.
    10.1016/j.applthermaleng.2017.05.127
  41. Carneiro, V.H.; Capela, P.; Teixeira, J.C.; Teixeira, S.; Cerqueira, F.; Macedo, F.; Ribas, L.; Soares, D.. "Influence of Copper Layer Content in the Elastic and Damping Behavior of Glass-Fiber/Epoxy-Resin Composites". Applied Composite Materials 23 6 (2016): 1219-1228. http://www.scopus.com/inward/record.url?eid=2-s2.0-84997335610&partnerID=MN8TOARS.
    10.1007/s10443-016-9510-7
  42. Rodrigues, N.; Ferreira, A.C.; Teixeira, S.F.; Soares, D.; Teixeira, J.C.; Cerqueira, F.; Macedo, F.. "Contact angle measurement of SAC 305 solder: numerical and experimental approach". Journal of Materials Science: Materials in Electronics 27 9 (2016): 8941-8950. http://www.scopus.com/inward/record.url?eid=2-s2.0-84965065058&partnerID=MN8TOARS.
    10.1007/s10854-016-4924-4
  43. Barbosa, F.V.; Afonso, J.L.; Rodrigues, F.B.; Teixeira, J.C.F.. "Development of a solar concentrator with tracking system". Mechanical Sciences 7 2 (2016): 233-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-84997497010&partnerID=MN8TOARS.
    10.5194/ms-7-233-2016
  44. Ferreira, A.C.; Nunes, M.L.; Teixeira, J.C.F.; Martins, L.A.S.B.; Teixeira, S.F.C.F.. "Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes". Energy 111 (2016): 1-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-84971301576&partnerID=MN8TOARS.
    10.1016/j.energy.2016.05.091
  45. Brito, F.P.; Alves, A.; Pires, J.M.; Martins, L.B.; Martins, J.; Oliveira, J.; Teixeira, J.; Goncalves, L.M.; Hall, M.J.. "Analysis of a Temperature-Controlled Exhaust Thermoelectric Generator During a Driving Cycle". Journal of Electronic Materials 45 3 (2016): 1846-1870. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959525741&partnerID=MN8TOARS.
    10.1007/s11664-015-4258-7
  46. Lau, C.S.; Khor, C.Y.; Soares, D.; Teixeira, J.C.; Abdullah, M.Z.. "Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: A review". Soldering and Surface Mount Technology 28 2 (2016): 41-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-84964240520&partnerID=MN8TOARS.
    10.1108/SSMT-10-2015-0032
  47. Gonçalves, C.; Leitão, H.; Lau, C.S.; Teixeira, J.C.; Ribas, L.; Teixeira, S.; Cerqueira, M.F.; Macedo, F.; Soares, D.. "Wetting behaviour of SAC305 solder on different substrates in high vacuum and inert atmosphere". Journal of Materials Science: Materials in Electronics 26 7 (2015): 5106-5112. http://www.scopus.com/inward/record.url?eid=2-s2.0-84931575906&partnerID=MN8TOARS.
    10.1007/s10854-015-3037-9
  48. Rodrigues, N.J.O.; Oliveira, R.F.; Teixeira, S.F.C.F.; Miguel, A.S.; Teixeira, J.C.; Baptista, J.S.. "Thermal comfort assessment of a surgical room through computational fluid dynamics using local PMV index". Work 51 3 (2015): 445-456. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938310820&partnerID=MN8TOARS.
    10.3233/WOR-141882
  49. TEIXEIRA, JOSÉ. "The role of lubricant feeding conditions on the performance improvement and friction reduction of journal bearings". Tribology International (2014): http://dx.doi.org/10.1016/j.triboint.2013.11.016.
    10.1016/j.triboint.2013.11.016
  50. TEIXEIRA, JOSÉ. "Effect of Hot Pressing Variables on the Microstructure, Relative Density and Hardness of Sterling Silver (AG-CU alloy) Powder Compacts". Materials Research (2014): http://dx.doi.org/10.1590/S1516-14392014005000022.
    10.1590/S1516-14392014005000022
  51. Brito, F.P.; Miranda, A.S.; Claro, J.C.P.; Teixeira, J.C.; Costa, L.; Fillon, M.. "Thermohydrodynamic modelling of journal bearings under varying load angle and negative groove flow rate". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228 9 (2014): 955-973. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907344189&partnerID=MN8TOARS.
    10.1177/1350650114526388
  52. Puga, H.; Barbosa, J.; Teixeira, J.C.; Prokic, M.. "A new approach to ultrasonic degassing to improve the mechanical properties of aluminum alloys". Journal of Materials Engineering and Performance 23 10 (2014): 3736-3744. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907590074&partnerID=MN8TOARS.
    10.1007/s11665-014-1133-2
  53. TEIXEIRA, JOSÉ. "Analysis of Industrial Waste in Wood Pellets and Co-combustion Products". Waste and Biomass Valorization (2013): http://link.springer.com/article/10.1007/s12649-013-9271-6.
    10.1007/s12649-013-9271-6
  54. TEIXEIRA, JOSÉ. "On the hot pressing of coloured high-gold alloys powder compacts applied to the manufacturing of innovative jewellery items". Gold Bull (2013): http://dx.doi.org/10.1007/s13404-013-0089-6.
    10.1007/s13404-013-0089-6
  55. Ferreira, A.C.M.; Nunes, M.L.; Teixeira, S.F.C.F.; Leão, C.P.; Silva, Â.M.; Teixeira, J.C.F.; Martins, L.A.S.B.. "An economic perspective on the optimisation of a small-scale cogeneration system for the Portuguese scenario". Energy 45 1 (2012): 436-444. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865425823&partnerID=MN8TOARS.
    10.1016/j.energy.2012.05.054
  56. TEIXEIRA, JOSÉ. "Development of new spacer device geometry: a CFD study (Part I)". Computer Methods in Biomechanics and Biomedical Engineering (2011): http://www.ncbi.nlm.nih.gov/pubmed/21491261.
    10.1080/10255842.2011.563359
  57. TEIXEIRA, JOSÉ. "Thermo­economic optimization of CHP systems: from large to small scale applications". International Journal of Engineering and Industrial Management (2011):
  58. TEIXEIRA, JOSÉ. "The effect of oscillations on the flow patterns near a simulated bed". Coastal Engineering (2010):
    10.1016/j.coastaleng.2010.02.007
  59. Marques, J.M.; Carreira, P.M.; Marques, J.E.; Chaminé, H.I.; Fonseca, P.E.; Monteiro Santos, F.A.; Eggenkamp, H.G.M.; Teixeira, J.. "The role of geosciences in the assessment of low-temperature geothermal resources (N-Portugal): A review". Geosciences Journal 14 4 (2010): 423-442. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651286668&partnerID=MN8TOARS.
    10.1007/s12303-010-0034-0
  60. Silva, A.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Experiments in a large-scale venturi scrubber. Part I: Pressure drop". Chemical Engineering and Processing: Process Intensification 48 1 (2009): 59-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-68749109498&partnerID=MN8TOARS.
    10.1016/j.cep.2008.02.001
  61. Teixeira, J.C.; Sena Jr., F.C.; Silva, A.M.V.; Stragevitch, L.; Silva, J.M.F.. "Moving boundary in non-equilibrium simple batch distillation in non-ideal systems". Chemical Engineering and Processing: Process Intensification 48 11-12 (2009): 1574-1578. http://www.scopus.com/inward/record.url?eid=2-s2.0-71549128659&partnerID=MN8TOARS.
    10.1016/j.cep.2009.10.013
  62. Silva, A.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Experiments in large scale venturi scrubber. Part II. Droplet size". Chemical Engineering and Processing: Process Intensification 48 1 (2009): 424-431. http://www.scopus.com/inward/record.url?eid=2-s2.0-68749106289&partnerID=MN8TOARS.
    10.1016/j.cep.2008.05.007
  63. Puga, H.; Teixeira, J.C.; Barbosa, J.; Seabra, E.; Ribeiro, S.; Prokic, M.. "The combined effect of melt stirring and ultrasonic agitation on the degassing efficiency of AlSi9Cu3 alloy". Materials Letters 63 24-25 (2009): 2089-2092. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349135280&partnerID=MN8TOARS.
    10.1016/j.matlet.2009.06.059
  64. Araújo, B.J.; Teixeira, J.C.F.; Cunha, A.M.; Groth, C.P.T.. "Parallel three-dimensional simulation of the injection molding process". International Journal for Numerical Methods in Fluids 59 7 (2009): 801-815. http://www.scopus.com/inward/record.url?eid=2-s2.0-66149155503&partnerID=MN8TOARS.
    10.1002/fld.1852
  65. TEIXEIRA, JOSÉ. "Physical Characterization of Estuarine Sediments in the Northern Coast of Portugal". Journal of Coastal Research (2008): http://dx.doi.org/10.2112/08-1017.1.
    10.2112/08-1017.1
  66. Carneiro, F.; Ribeiro, V.G.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Numerical study of blood fluid rheology in the abdominal aorta". WIT Transactions on Ecology and the Environment 114 (2008): 169-178. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849153217&partnerID=MN8TOARS.
    10.2495/DN080181
  67. Araújo, M.A.V.C.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Application of laser anemometry for measuring critical bed shear stress of sediment core samples". Continental Shelf Research 28 20 (2008): 2718-2724. http://www.scopus.com/inward/record.url?eid=2-s2.0-56349124858&partnerID=MN8TOARS.
    10.1016/j.csr.2008.09.011
  68. TEIXEIRA, JOSÉ. "Development of Mechanical Engineering Curricula at the University of Minho". European Journal of Engineering Education (2007): http://www.tandfonline.com/doi/abs/10.1080/03043790701433210.
    10.1080/03043790701433210
  69. TEIXEIRA, JOSÉ. "Design of a test facility to replicate the transient flow in arterial systems". Journal of Biomechanics (2006):
  70. Martins, J.A.; Malheiro, M.J.A.; Teixeira, J.C.; Cruz Pinto, J.J.C.. "The role of the temperature errors in DSC scans on the prediction of the average density of nuclei in polymers crystallized under quiescent conditions". Thermochimica Acta 391 1-2 (2002): 97-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037068094&partnerID=MN8TOARS.
    10.1016/S0040-6031(02)00167-3
  71. Ferreira, M.E.; Teixeira, J.C.F.; Bates, C.J.; Bowen, P.J.. "Detailed investigation of the influence of fluid viscosity on the performance characteristics of plain-orifice effervescent atomizers". Atomization and Sprays 11 2 (2001): 107-124. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035295140&partnerID=MN8TOARS.
  72. TEIXEIRA, JOSÉ; Barros, I.; Teixeira, S.F.C.F.; Teixeira, J.C.; Cunha, A.M.. "Evaluation of the Thermal Behaviour of Injection Moulds". International Polymer Processing 15 1 (2000): 95-102. http://www.hanser-elibrary.com/doi/abs/10.3139/217.1579.
    10.3139/217.1579
  73. TEIXEIRA, JOSÉ. "Modelling heat exchangers for domestic boilers". Journal of Advanced Engineering - Acta Polytechnica (2000): https://ojs.cvut.cz/ojs/index.php/ap/article/view/116.
  74. Azzopardi, B.J.; Teixeira, J.C.F.. "Detailed measurements of vertical annular two-phase flow-part I: Drop velocities and sizes". Journal of Fluids Engineering, Transactions of the ASME 116 4 (1994): 792-795. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027994901&partnerID=MN8TOARS.
    10.1115/1.2911851
  75. Azzopardi, B.J.; Teixeira, J.C.F.. "Detailed measurements of vertical annular two-phase flow-part II: Gas core turbulence". Journal of Fluids Engineering, Transactions of the ASME 116 4 (1994): 796-800. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028054357&partnerID=MN8TOARS.
    10.1115/1.2911852
Capítulo de livro
  1. Carvalho, Violeta; Lopes, Diogo; Silva, João; Puga, Hélder; A. Lima, Rui; Carlos Teixeira, José; Teixeira, Senhorinha. "Comparison of CFD and FSI Simulations of Blood Flow in Stenotic Coronary Arteries". In Computational Fluid Dynamics [Working Title]. IntechOpen, 2022.
    10.5772/intechopen.102089
  2. José Brito; João Silva; José Teixeira; Senhorinha Teixeira. "Energy Performance of a Service Building: Comparison Between EnergyPlus and TRACE700". 364-375. Springer International Publishing, 2021.
    10.1007/978-3-030-86653-2_27
  3. Diogo Esteves; João Silva; Luís Martins; José Teixeira; Senhorinha Teixeira. "Building Energy Performance: Comparison Between EnergyPlus and Other Certified Tools". 493-503. Springer International Publishing, 2021.
    Publicado • 10.1007/978-3-030-86653-2_36
  4. João Silva; José Brás; Ricardo Noversa; Nelson Rodrigues; Luís Martins; José Teixeira; Senhorinha Teixeira. "Energy Performance of a Service Building: Comparison Between EnergyPlus and Revit". 2020.
    10.1007/978-3-030-58817-5_16
  5. Ricardo Noversa; João Silva; Nelson Rodrigues; Luís Martins; José Teixeira; Senhorinha Teixeira. "Thermal Simulation of a Supermarket Cold Zone with Integrated Assessment of Human Thermal Comfort". 2020.
    10.1007/978-3-030-58817-5_17
  6. TEIXEIRA, JOSÉ. "A CFD Study of a pMDI Plume Spray". Alemanha, 2014.
    10.1007/978-94-017-8832-8_13
  7. TEIXEIRA, JOSÉ. "Efficiency Evaluation of VHC: a CFD Comparison Study at Constant Flow". Suiça, 2014.
  8. TEIXEIRA, JOSÉ. "A Form-Closed Cam-Follower Mechanism for a Breath Simulator Machine". In New Trends in Mechanism and Machine Science. Alemanha, 2014.
    10.1007/978-3-319-09411-3_14
  9. TEIXEIRA, JOSÉ; Esteves, T.C.J.; Cabral, P.; Teixeira, J.C.; Ferreira, A.J.D.. "GIS for the Determination of Bioenergy Potential in the Centre Region of Portugal". Países Baixos, 2012.
    10.1007/978-94-007-1858-6_15
  10. TEIXEIRA, JOSÉ. "pMDI Sprays: Theory, Experiment and Numerical Simulation". 2012.
    10.5772/46099
  11. TEIXEIRA, JOSÉ; Oliveira, R.F.; Teixeira, S.; Silva, L.F.; Teixeira, J.C.; Antunes, H.. "Study of a pressurized metered-dose inhaler spray parameters in Fluent". In Proceedings of the WCE2010 World Congress on Engineering 2010, 1083-1087. Reino Unido, 2010.
  12. TEIXEIRA, JOSÉ. "Droplet distribution flowing in a venturi scrubber". In Comparing Design in Nature with Science and Engineering. Reino Unido, 2008.
    10.2495/DN080191
  13. TEIXEIRA, JOSÉ. "Modelling of Heap Leaching for low grade laterite ores". Estados Unidos, 1999.
  14. TEIXEIRA, JOSÉ. "Design and optimsation of calibrators for thermoplastics profile extrusion". 1997.
  15. TEIXEIRA, JOSÉ. "Transient thermal behaviour of molds for polymer processing". 1995.
  16. TEIXEIRA, JOSÉ. "Evaluation of nozzles for water atomisation in agriculture". 1994.
Edição de número de revista
  1. TEIXEIRA, JOSÉ. "Further Developments on the CFD Flow Analysis Inside the Volumatic Spacer". Selected Proceedings from the 13th International Congress in Project Engineering (2010): http://aeipro.com/files/selected_proceedings/2009/sp09_0443_0451.2438.pdf.
Livro
  1. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. Numerical Analysis of Single Jet Impinging a Flat and Non-flat Plate. 2020.
    10.1007/978-3-030-58814-4_34
  2. Ribeiro, P.; Vilarinho, C.; Ferreira, M.; Seabra, E.; Fraga, L.; Teixeira, J.. Strategies for the design of domestic pellet boilers. 2019.
    10.1007/978-3-319-91334-6_91
  3. Esteves, D.; Silva, J.; Rodrigues, N.; Martins, L.; Teixeira, J.; Teixeira, S.. Simulation of PMV and PPD Thermal Comfort Using EnergyPlus. 2019.
    10.1007/978-3-030-24311-1_4
  4. Rodrigues, N.; Silva, J.; Teixeira, J.; Teixeira, S.. Assessment of Indoor Thermal Conditions in a Cinema Room Using CFD Simulation: A Case Study. 2019.
    10.1007/978-3-030-24311-1_3
  5. Barbosa, F.V.; Sousa, S.D.T.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. Application of DOE for the Study of a Multiple Jet Impingement System. 2019.
    10.1007/978-3-030-24302-9_1
  6. Loureiro, I.F.; Leão, C.P.; Costa, F.; Teixeira, J.; Arezes, P.M.. ETdAnalyser: A model-based architecture for ergonomic decision intervention. 2013.
  7. Ferreira, M.; Teixeira, J.C.. Application of variance analysis to the combustion of residual oils. 2012.
    10.1007/978-3-642-31137-6_13
  8. Teixeira, J.C.; Lomba, R.; Teixeira, S.F.C.F.; Lobarinhas, P.. Application of CFD tools to optimize natural building ventilation design. 2012.
    10.1007/978-3-642-31137-6_15
  9. Costa, M.A.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. Roughness effects upon the near sediment turbulence patterns. 2002.

Propriedade Intelectual

Pedido provisório de patente
  1. 2022. "ECO PDMS COMPOSITE HEAT EXCHANGER, METHODS FOR OBTAINING AND USES THEREOF".
  2. 2020. "System for efficient heat recovery and method thereof".
    Protegido
Atividades

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2020/03 - 2024/03 Die-casting of Al-based matrix composites
Coorientador
programa doutoral engenharia mecânica (Doutoramento)
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2019 - 2023 Numerical and in vitro study of blood flow for the optimization of biodegradable magnesium stents manufactured by microcasting
Coorientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho, Portugal
2021 - 2022/01 Study and evaluation of different modelling tools for the optimization of the vacuum infusion process in glass and carbon fibre reinforced composites
Orientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020 - 2022/01 Simulação da propagação de incêndios florestais
Orientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2018 - 2022 Integration of a Model for Volatile Release in the CFD Simulation of an Industrial Biomass Boiler
Orientador
Líderes para Indústrias Tecnológicas (Doutoramento)
Universidade do Minho, Portugal
2017 - 2022 Development of a new technique for manufacturing biodegradable magnesium stents
Coorientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho, Portugal
2017 - 2021/11/11 Convection from multiple jets over a complex moving surface
Orientador
Líderes para as Indústrias Tecnológicas (Doutoramento)
Universidade do Minho, Portugal
2020 - 2021/11 Caraterização e otimização do desempenho de pequenos rotores eólicos
Coorientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020 - 2021/06 Thermal Analysis of the Additive Manufacturing Process: The Influence of the Anisotropic Behavior
Orientador
Mestrado Integrado em Engenharia do Produto (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020/11 - 2021/05 Optimization and Energy Analysis of Residual Biomass Torrefaction
Coorientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2019/11 - 2021/04 Validação de modelos de simulação térmica dinâmica num edifício existente em situação real de funcionamento
Orientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2019/10 - 2021/04 Aplicação de sistemas de informação geográfica para determinação da disponibilidade de biomassa no concelho de Mondim de Basto
Coorientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020 - 2021/01 CFD Analysis of the Air Flow Through Horizontal Axis Wind Turbines
Orientador
Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2014/11/30 - 2019/12 Wood pellets combustion in a fixed bed combustor
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho, Portugal
2014/06 - 2019 Sustainable lipids production from municipal wastewaters
Coorientador
Engenharia Química e Biológica (Doutoramento)
Universidade do Minho, Portugal
2012 - 2016 Study and development of a holding chamber for inhalation
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2006 - 2010 Influência do ciclo cardíaco no escoamento sanguíneo na vizinhança da bifurcação ilíaca
Orientador
Mechanical Engineering (Doutoramento)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2005 - 2009/04 Intregrated Three-dimensional Flow and Thermal Simulation of the Injection Moulding Process
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2003 - 2008/11 Atomização Efervescente na Combustão de Óleos Usados
Orientador
Mechanical Engineering (Doutoramento)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2004 - 2008 Numerical and Experimental Study of Venturi Scrubbers
Coorientador
Engenharia de Produção e Sistemas (Doutoramento)
Universidade do Minho, Portugal
1999 - 2004/02 Modelação do Comportamento Térmico de Moldes de Injecção
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho, Portugal
2000/09 - 2004 Erosion Mechanisms in Marine Sediments
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho, Portugal
1999 - 2003 Estudo e Modelação do Arrefecimento de Extrudidos em Calibradores
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2018/06/17 - 2018/06/21 ECOS 2018 - 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (2018/06/17 - 2018/06/21)
Conferência (Presidente da Comissão Organizadora)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2016/11 - 2016/11 Sessão 2-7-3 Computational Modeling – Thermal Simulations, ASME International Mechanical Engineering Congress and Exhibition, Phoenix, Novembro 2016 (2016/11 - 2016/11)
Congresso (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2015/11 - 2015/11 Sessão 7-5-2 Advanced Power Cycles, ASME International Mechanical Engineering Congress and Exhibition, Houston, Novembro 2015 (2015/11 - 2015/11)
Congresso (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2014/08 - 2014/08 Sessão Mixed Convection na 15th International Heat Transfer Conference, IHTC-15, Kyoto, Agosto de 2014. Japan (2014/08 - 2014/08)
Conferência (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2012/11 - 2012/11 Sessão 6-29-1 Biofuel Conversion, Firing and Power, ASME International Mechanical Engineering Congress and Exhibition, Houston, Novembro 2012 (2012/11 - 2012/11)
Congresso (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2011/06/14 - 2011/06/15 2º Congresso Ibérico de Biocombustíveis Sólidos, Universidade do Minho, Guimarães, 14-15 Junho 2011 (2011/06/14 - 2011/06/15)
Congresso (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2010/11 - 2010/11 Sessão 2-4-1 Vibration and Accoustics in Respiratory and Cardiovascular Applications I, ASME International Mechanical Engineering Congress and Exhibition, Vancouver, 2010, Novembro 2010 (2010/11 - 2010/11)
Congresso (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2010/06 - 2010/06 1º Congresso Ibérico de Biocombustíveis Sólidos, Universidade de Vigo, Ponte Vedra, Junho 2010 (2010/06 - 2010/06)
Congresso (Coorganizador)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2008/04/06 - 2008/04/09 Bioenergy: Challenges and Opportunities (2008/04/06 - 2008/04/09)
Conferência (Presidente da Comissão Organizadora)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal

Arbitragem científica em conferência

Nome da conferência Local da conferência
2021/06/28 - 2021/07/02 ECOS 2021 - 34th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Taormina, Sicily
2020/06/29 - 2020/07/02 ECOS 2020 - 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Osaka Prefecture University Graduate School of Engineering
2019/06/23 - 2019/06/28 ECOS 2019 - 32 nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Silesian University of Technology
2017/07/02 - 2017/07/07 ECOS 2017 - 30th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems San Diego State University

Membro de associação

Nome da associação Tipo de participação
2020/11 - Atual ECOS International Society, Incorporated - a California Public Benefit Corporation. Member of the Board of Directors
2017 - 2021 European Technology and Innovation Platform on Renewable Heating and Cooling steering committee