???global.info.a_carregar???
M. D. Banea got her PhD in Mechanical Engineering at the Faculty of Engineering of the University of Porto, in 2011. She was a Post-PhD researcher at Institute of Mechanical Engineering (IDMEC), Faculty of Engineering of the University of Porto from 2012 to 2015. During 2015-2022, she was a professor at CEFET/RJ - Federal Center of Technological Education in Rio de Janeiro, Brazil. M.D Banea currently works at the Departamento de Engenharia de Materiais e Cerâmica, Universidade de Aveiro, Portugal. Her research is mainly about composite materials and adhesive bonding. M.D. Banea published approximately 134 research papers in International Scientific Journals and more than 180 papers in proceedings of international conferences. Her papers were cited 6559 times and correspond to an h-index of 44 (SCOPUS, 24/03/2024). One of her papers obtained the SAGE Best Paper Award 2010 and Donald Julius Groen Prize 2010 (both awards given by Institution of Mechanical Engineers, UK). She received in 2013 the Award of Fundação Eng. António de Almeida for the best PhD thesis by Fundação Eng. António de Almeida. She is a member of editorial board of the following journals: Journal of Renewable Materials and International Journal of Adhesion and Adhesives. She is a reviewer of more than 45 ISI journals. She is recognized by Stanford University's list of the world's Top 2% of the most-cited scientists in 2019-2022.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Mariana DOINA BANEA

Nomes de citação

  • Banea, M. D.

Identificadores de autor

Ciência ID
2317-9405-7982
ORCID iD
0000-0002-8378-2292
Researcher Id
O-8231-2016
Scopus Author Id
57203024419

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Compósitos
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Engenharia dos Materiais
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Aeroespacial

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Romeno (Idioma materno)
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Português Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Francês Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1)
Espanhol; Castelhano Utilizador elementar (A1) Utilizador independente (B1) Utilizador elementar (A1) Utilizador elementar (A1)
Produções

Publicações

Artigo em revista
  1. Matilde Oliveira; Vitor Neves; Mariana D. Banea. "Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites". Materials (2024): https://doi.org/10.3390/ma17081777.
    10.3390/ma17081777
  2. Henrique Queiroz; Vitor Pastor; Jorge Neto; Daniel Cavalcanti; Mariana D Banea. "Mechanical characterization of jute/carbon hybrid epoxy composites". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207241233947.
    10.1177/14644207241233947
  3. H.F.M. de Queiroz; J.S.S. Neto; D.K.K. Cavalcanti; M.D. Banea. "A novel 3D fibre-reinforcement architecture for high performance natural fibre reinforced composite adhesively bonded joints". The Journal of Adhesion (2024): https://doi.org/10.1080/00218464.2023.2200173.
    10.1080/00218464.2023.2200173
  4. Duarte, C.T.; de Queiroz, H.F.M.; Neto, J.S.S.; Cavalcanti, D.K.K.; Banea, M.D.. "Evaluation of durability of 3D-printed multi-material parts for potential applications in structures exposed to marine environments". Procedia Structural Integrity 53 (2024): 299-308. http://dx.doi.org/10.1016/j.prostr.2024.01.037.
    10.1016/j.prostr.2024.01.037
  5. D. K. K. Cavalcanti; M. Medina; H. F. M. de Queiroz; J. S. S. Neto; F. J. P. Chaves; M. D. Banea. "Recent Advances in Adhesive Bonding of 3D-Printed Parts and Methods to Increase their Mechanical Performance". Annals of Dunarea de Jos University of Galati. Fascicle XII, Welding Equipment and Technology (2023): https://doi.org/10.35219/awet.2023.02.
    10.35219/awet.2023.02
  6. Jorge S. S. Neto; Daniel K. K. Cavalcanti; Luiz E. da Cunha Ferro; Henrique F. M. de Queiroz; Ricardo A. A. Aguiar; Mariana D. Banea. "Effect of Multi-Walled Carbon Nanotubes on the Mechanical and Thermal Properties of Curauá Natural-Fiber-Reinforced Composites". C (2023): https://doi.org/10.3390/c9040102.
    10.3390/c9040102
  7. H. F. M de Queiroz; R. H. A Rosa; J. S. S. Neto; D. K. K. Cavalcanti; M. D Banea. "Mechanical characterization of short Curauá/glass fiber-reinforced interlaminar hybrid composite adhesive joints". Journal of Adhesion Science and Technology (2023): https://doi.org/10.1080/01694243.2023.2261263.
    10.1080/01694243.2023.2261263
  8. D.K.K. Cavalcanti; H.F.M. de Queiroz; M.D. Banea. "Performance enhancement of adhesive joints of additive manufactured parts by using different types of fibre reinforcements". International Journal of Adhesion and Adhesives (2023): https://doi.org/10.1016/j.ijadhadh.2023.103371.
    10.1016/j.ijadhadh.2023.103371
  9. GB de Seixas; HFM de Queiroz; JSS Neto; MD Banea. "Effect of water on the mechanical and thermal properties of natural fibre reinforced hybrid composites". Journal of Composite Materials (2023): https://doi.org/10.1177/00219983231166570.
    10.1177/00219983231166570
  10. Mariana Doina Banea. "Natural Fibre Composites and Their Mechanical Behaviour". Polymers (2023): https://doi.org/10.3390/polym15051185.
    10.3390/polym15051185
  11. A. C. de Mendonça; D. K. K. Cavalcanti; H. F. M. de Queiroz; J. S. S. Neto; F. J. P. Chaves; M. D. Banea. "Mechanical Characterization of Filler Modified ABS 3D Printed Composites Made via Fused Filament Fabrication". Annals of Dunarea de Jos University of Galati. Fascicle XII, Welding Equipment and Technology (2022): https://doi.org/10.35219/awet.2022.02.
    10.35219/awet.2022.02
  12. Daniel K. K. Cavalcanti; Jorge S. S. Neto; Henrique F. M. de Queiroz; Yiyun. Wu; Victor F. S. Neto; Mariana D. Banea. "Development and Mechanical Characterization of Short Curauá Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling". Polymers (2022): https://doi.org/10.3390/polym14225047.
    10.3390/polym14225047
  13. Daniel K. K. Cavalcanti; Henrique F. M. de Queiroz; Jorge S. S. Neto; Mariana D. Banea. "Strengthening of additive manufactured parts by using different type of fibre reinforcements". The International Journal of Advanced Manufacturing Technology (2022): https://doi.org/10.1007/s00170-022-10327-8.
    10.1007/s00170-022-10327-8
  14. Henrique F.M de Queiroz; Mariana D. Banea. "Methods to increase the mechanical performance of composite adhesive joints: An overview with focus on joints with natural fibre composite adherends". Journal of Composite Materials (2022): https://doi.org/10.1177/00219983221125906.
    10.1177/00219983221125906
  15. Jorge S. S. Neto; Henrique F. M. de Queiroz; Ricardo A. A. Aguiar; Mariana D. Banea. "A Review on the Thermal Characterisation of Natural and Hybrid Fiber Composites". Polymers (2021): https://doi.org/10.3390/polym13244425.
    10.3390/polym13244425
  16. H. F. M. de Queiroz; M. D. Banea; D. K. K. Cavalcanti. "Adhesively bonded joints of jute, glass and hybrid jute/glass fibre-reinforced polymer composites for automotive industry". Applied Adhesion Science 9 1 (2021): https://doi.org/10.1186/s40563-020-00131-6.
    10.1186/s40563-020-00131-6
  17. Sofia Maggiore; Mariana D. Banea; Paola Stagnaro; Giorgio Luciano. "A Review of Structural Adhesive Joints in Hybrid Joining Processes". Polymers (2021): https://doi.org/10.3390/polym13223961.
    10.3390/polym13223961
  18. Jorge S. S. Neto; Henrique Queiroz; Daniel Cavalcanti; Ricardo Aguiar; António Pereira; Mariana Doina Banea. "Effect of ultraviolet radiation and water spraying on the mechanical properties of multi-walled carbon nanotubes reinforced natural fiber and hybrid composites". Journal of Applied Polymer Science (2021): 51915-51915. https://doi.org/10.1002/app.51915.
    10.1002/app.51915
  19. Henrique Queiroz; Mariana Doina Banea; Daniel Cavalcanti; Jorge Neto. "The effect of multiscale hybridization on the mechanical properties of natural fiber-reinforced composites". Journal of Applied Polymer Science 138 41 (2021): 51213-51213. https://doi.org/10.1002/app.51213.
    10.1002/app.51213
  20. D. K. K. Cavalcanti; M. D. Banea; H. F. M. de Queiroz. "Effect of Material on the Mechanical Properties of Additive Manufactured Thermoplastic Parts". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology (2020): https://doi.org/10.35219/awet.2020.01.
    10.35219/awet.2020.01
  21. S. Budhe; M. D. Banea; S. de Barros. "Analysis of Failure Pressure of Defective Pipes Repaired with Composite Systems Considering the Plastic Deformation of Pipe". Journal of The Institution of Engineers (India): Series C (2020): https://doi.org/10.1007/s40032-020-00612-4.
    10.1007/s40032-020-00612-4
  22. JSS Neto; MD Banea; DKK Cavalcanti; HFM Queiroz; RAA Aguiar. "Analysis of mechanical and thermal properties of epoxy multiwalled carbon nanocomposites". Journal of Composite Materials (2020): 002199832093923-002199832093923. https://doi.org/10.1177/0021998320939232.
    10.1177/0021998320939232
  23. DKK Cavalcanti; MD Banea; JSS Neto; RAA Lima. "Comparative analysis of the mechanical and thermal properties of polyester and epoxy natural fibre-reinforced hybrid composites". Journal of Composite Materials (2020): https://doi.org/10.1177/0021998320976811.
    10.1177/0021998320976811
  24. A. L. Pereira; M. D. Banea; A. B. Pereira. "Effect of intralaminar hybridization on mode I fracture toughness of natural fiber-reinforced composites". Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 9 (2020): https://doi.org/10.1007/s40430-020-02525-w.
    10.1007/s40430-020-02525-w
  25. G Viana; RJC Carbas; M Costa; MD Banea; LFM da Silva. "A new cohesive element to model environmental degradation of adhesive joints in the rail industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): https://doi.org/10.1177/0954406220948901.
    10.1177/0954406220948901
  26. HFM de Queiroz; MD Banea; DKK Cavalcanti. "Experimental analysis of adhesively bonded joints in synthetic- and natural fibre-reinforced polymer composites". Journal of Composite Materials (2020): 002199831987697-002199831987697. https://doi.org/10.1177/0021998319876979.
    10.1177/0021998319876979
  27. Alexandre L. Pereira; Mariana D. Banea; Jorge S.S. Neto; Daniel K.K. Cavalcanti. "Mechanical and Thermal Characterization of Natural Intralaminar Hybrid Composites Based on Sisal". Polymers 12 4 (2020): 866-866. https://doi.org/10.3390/polym12040866.
    10.3390/polym12040866
  28. M. D. Banea; L. F. M. Da Silva; R. J. C. Carbas; D.K.K Cavalcanti; L.F.G. De Souza. "The effect of environment and fatigue loading on the behaviour of TEPs-modified adhesives". The Journal of Adhesion (2020): https://doi.org/10.1080/00218464.2019.1680546.
    10.1080/00218464.2019.1680546
  29. Rosemere de Araujo Alves Lima; Daniel Kawasaki Cavalcanti; Jorge de Souza e Silva Neto; Hector Meneses da Costa; Mariana Doina Banea. "Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites". Polymer Composites (2020): https://doi.org/10.1002/pc.25371.
    10.1002/pc.25371
  30. D. K. K. Cavalcanti; M. D. Banea; H. F. M. de Queiroz. "Mechanical Characterization of Bonded Joints Made of Additive Manufactured Adherends". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology (2019): https://doi.org/10.35219/awet.2019.04.
    10.35219/awet.2019.04
  31. P. A. Zugliani; M. D. Banea; S. Budhe; R. J. Carbas; L. F. M. da Silva; N. R. F. Rohem; S. de Barros. "Bonded composite repair of metallic pipeline using energy release rate method". Journal of Adhesion Science and Technology (2019): 1-16. https://doi.org/10.1080/01694243.2019.1632537.
    10.1080/01694243.2019.1632537
  32. M. Q. dos Reis; M. D. Banea; L. F. M. da Silva; R. J. C. Carbas. "Mechanical characterization of a modern epoxy adhesive for automotive industry". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 8 (2019): https://doi.org/10.1007/s40430-019-1844-2.
    10.1007/s40430-019-1844-2
  33. J. S. S. Neto; R. A. A. Lima; D. K. K. Cavalcanti; J. P. B. Souza; R. A. A. Aguiar; M. D. Banea. "Effect of chemical treatment on the thermal properties of hybrid natural fiber-reinforced composites". Journal of Applied Polymer Science (2019): 47154-47154. https://doi.org/10.1002/app.47154.
    10.1002/app.47154
  34. Rosemere de A. A. Lima; Daniele Rocca; Hector R. M. Da Costa; Juliana P. B. de Sousa; Paolo Bettini; Giuseppe Sala; Mariana D. Banea. "Interfacial adhesion between embedded fibre optic sensors and epoxy matrix in composites". Journal of Adhesion Science and Technology (2018): https://doi.org/10.1080/01694243.2018.1537053.
    10.1080/01694243.2018.1537053
  35. G. Viana; J. Machado; R. Carbas; M. Costa; L. F. M. da Silva; M. Vaz; M. D. Banea. "Strain rate dependence of adhesive joints for the automotive industry at low and high temperatures". Journal of Adhesion Science and Technology (2018): 1-18. https://doi.org/10.1080/01694243.2018.1464635.
    10.1080/01694243.2018.1464635
  36. M.D. Banea; M. Rosioara; R.J.C. Carbas; L.F.M. da Silva. "Multi-material adhesive joints for automotive industry". Composites Part B: Engineering 151 (2018): 71-77. https://doi.org/10.1016/j.compositesb.2018.06.009.
    10.1016/j.compositesb.2018.06.009
  37. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Barbosa, A.Q.; de Barros, S.; Viana, G.. "Effect of water on the behaviour of adhesives modified with thermally expandable particles". International Journal of Adhesion and Adhesives 84 (2018): 250-256. http://dx.doi.org/10.1016/j.ijadhadh.2018.04.002.
    10.1016/j.ijadhadh.2018.04.002
  38. J. Bonaldo; M.D. Banea; R.J.C. Carbas; L.F.M. Da Silva; S. De Barros. "Functionally graded adhesive joints by using thermally expandable particles". The Journal of Adhesion (2018): https://doi.org/10.1080/00218464.2018.1456338.
    10.1080/00218464.2018.1456338
  39. BANEA, Mariana. "Effect of Babassu Natural Filler on PBAT/PHB Biodegradable Blends: An Investigation of Thermal, Mechanical, and Morphological Behavior". Materials (2018): http://www.mdpi.com/1996-1944/11/5/820.
    10.3390/ma11050820
  40. G. Viana; M. Costa; M. D. Banea; L. F. M. da Silva. "Cohesive Properties of Environmentally Degraded Epoxy Adhesives". U.Porto Journal of Engineering (2018): https://doi.org/10.24840/2183-6493_003.002_0005.
    10.24840/2183-6493_003.002_0005
  41. Arouche, M.M.; Budhe, S.; Alves, L.A.; Teixeira de Freitas, S.; Banea, M.D.; de Barros, S.. "Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests". Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 1 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85040367446&partnerID=MN8TOARS.
    10.1007/s40430-017-0959-6
  42. Arouche, M.M.; Budhe, S.; Banea, M.D.; Teixeira de Freitas, S.; de Barros, S.. "Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85045050142&partnerID=MN8TOARS.
    10.1177/1464420718766626
  43. De Barros, S.; Budhe, S.; Banea, M.D.; Rohem, N.R.F.; Sampaio, E.M.; Perrut, V.A.; Lana, L.D.M.. "An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe". Frattura ed Integrita Strutturale 12 44 (2018): 151-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045734934&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.44.12
  44. M. D. Banea; L. F. M. da Silva; R. J. C. Carbas; S. de Barros. "Debonding on command of multi-material adhesive joints". The Journal of Adhesion 93 10 (2017): 756-770. https://doi.org/10.1080%2F00218464.2016.1199963.
    10.1080/00218464.2016.1199963
  45. Banea, M.D.; da Silva, L.F.M.; Carbas, R.; Campilho, R.D.S.G.. "Effect of material on the mechanical behaviour of adhesive joints for the automotive industry". Journal of Adhesion Science and Technology 31 6 (2017): 663-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986203538&partnerID=MN8TOARS.
    10.1080/01694243.2016.1229842
  46. Viana, G.; Costa, M.; Banea, M.D.; da Silva, L.F.M.. "Behaviour of environmentally degraded epoxy adhesives as a function of temperature". Journal of Adhesion 93 1-2 (2017): 95-112. http://www.scopus.com/inward/record.url?eid=2-s2.0-84980344061&partnerID=MN8TOARS.
    10.1080/00218464.2016.1179118
  47. De Barros, S.; Banea, M.D.; Budhe, S.; De Siqueira, C.E.R.; Lobão, B.S.P.; Souza, L.F.G.. "Experimental analysis of metal-composite repair of floating offshore units (FPSO)". Journal of Adhesion 93 1-2 (2017): 147-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-84980407338&partnerID=MN8TOARS.
    10.1080/00218464.2016.1177514
  48. Santos, F.C.D.; Banea, M.D.; Carlo, H.L.; De Barros, S.. "Test methods for bond strength of glass fiber posts to dentin: A review". Journal of Adhesion 93 1-2 (2017): 159-186. http://www.scopus.com/inward/record.url?eid=2-s2.0-84989237209&partnerID=MN8TOARS.
    10.1080/00218464.2016.1184094
  49. Teixeira de Freitas, S.; Banea, M.D.; Budhe, S.; de Barros, S.. "Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests". Composite Structures 164 (2017): 68-75. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008215955&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.12.058
  50. Fernandes, P.; Viana, G.; Carbas, R.J.C.; Costa, M.; da Silva, L.F.M.; Banea, M.D.. "The influence of water on the fracture envelope of an adhesive joint". Theoretical and Applied Fracture Mechanics 89 (2017): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009788288&partnerID=MN8TOARS.
    10.1016/j.tafmec.2017.01.001
  51. Domingues, N.R.E.; Trojan, J.C.; Campilho, R.D.S.G.; Carbas, R.J.C.; Banea, M.D.; da Silva, L.F.M.. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Ciencia e Tecnologia dos Materiais 29 1 (2017): e114-e118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021952151&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.04.009
  52. Budhe, S.; Banea, M.D.; de Barros, S.; da Silva, L.F.M.. "An updated review of adhesively bonded joints in composite materials". International Journal of Adhesion and Adhesives 72 (2017): 30-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992522068&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2016.10.010
  53. Viana, G.; Costa, M.; Banea, M.D.; Da Silva, L.F.M.. "A review on the temperature and moisture degradation of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231 5 (2017): 488-501. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021923122&partnerID=MN8TOARS.
    10.1177/1464420716671503
  54. Budhe, S.; Banea, M.D.; Rohem, N.R.F.; Sampaio, E.M.; de Barros, S.. "Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines". Composite Structures 176 (2017): 1013-1019. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021416774&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.06.044
  55. Viana, G.; Costa, M.; Banea, M.D.; da Silva, L.F.M.. "Moisture and temperature degradation of double cantilever beam adhesive joints". Journal of Adhesion Science and Technology 31 16 (2017): 1824-1838. http://www.scopus.com/inward/record.url?eid=2-s2.0-85011306632&partnerID=MN8TOARS.
    10.1080/01694243.2017.1284640
  56. Viana, G.; Costa, M.; Banea, M.D.; da Silva, L.F.M.. "Water diffusion in double cantilever beam adhesive joints". Latin American Journal of Solids and Structures 14 2 (2017): 188-201. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013639066&partnerID=MN8TOARS.
    10.1590/1679-78253040
  57. Rohem, N.R.F.; Pacheco, L.J.; Budhe, S.; Banea, M.D.; Sampaio, E.M.; de Barros, S.. "Development and qualification of a new polymeric matrix laminated composite for pipe repair". Composite Structures 152 (2016): 737-745. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973109228&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.05.091
  58. Ghumatkar, A.; Budhe, S.; Sekhar, R.; Banea, M.D.; De Barros, S.. "Influence of adherend surface roughness on the adhesive bond strength". Latin American Journal of Solids and Structures 13 13 (2016): 2356-2370. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984813660&partnerID=MN8TOARS.
    10.1590/1679-78253066
  59. Nunes, S.L.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.; De Sousa, C.C.R.G.; Fernandes, T.A.B.; Banea, M.D.; Da Silva, L.F.M.. "Comparative failure assessment of single and double lap joints with varying adhesive systems". Journal of Adhesion 92 7-9 (2016): 610-634. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962468952&partnerID=MN8TOARS.
    10.1080/00218464.2015.1103227
  60. Barbosa, A.Q.; Da Silva, L.F.M.; Banea, M.D.; Öchsner, A.. "Methods to increase the toughness of structural adhesives with micro particles: An overview with focus on cork particles". Materialwissenschaft und Werkstofftechnik 47 4 (2016): 307-325. http://www.scopus.com/inward/record.url?eid=2-s2.0-84963628416&partnerID=MN8TOARS.
    10.1002/mawe.201600498
  61. Costa, M.; Viana, G.; Canto, C.; Da Silva, L.F.M.; Banea, M.D.; Chaves, F.; Campilho, R.D.S.G.; Fernandes, A.A.. "Effect of the size reduction on the bulk tensile and double cantilever beam specimens used in cohesive zone models". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 5 (2016): 968-982. http://www.scopus.com/inward/record.url?eid=2-s2.0-84988419036&partnerID=MN8TOARS.
    10.1177/1464420715610248
  62. Marques, E.A.S.; Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Sato, C.. "Effect of low temperature on tensile strength and mode i fracture energy of a room temperature vulcanizing silicone adhesive". Journal of Testing and Evaluation 44 3 (2016): 1284-1293. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984578001&partnerID=MN8TOARS.
    10.1520/JTE20140208
  63. Campilho, R.D.S.G.; Leitão, A.C.C.; Fernandes, R.L.; Azevedo, J.C.S.; Banea, M.D.. "Cohesive law estimation in mode II of a ductile adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 26 (2015): 27-32. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984535678&partnerID=MN8TOARS.
  64. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". Frattura ed Integrita Strutturale 31 (2015): 1-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920404080&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.31.01
  65. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Structural adhesives modified with thermally expandable particles". Journal of Adhesion 91 10-11 (2015): 823-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922825124&partnerID=MN8TOARS.
    10.1080/00218464.2014.985785
  66. Fernandes, T.A.B.; Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction". Journal of Adhesion 91 10-11 (2015): 841-862. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937031747&partnerID=MN8TOARS.
    10.1080/00218464.2014.994703
  67. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "A Study on Microstructure Characteristics of TEPs-modified Adhesives". Microscopy and Microanalysis 21 (2015): 7-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944063937&partnerID=MN8TOARS.
    10.1017/S1431927615013847
  68. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Adhesive thickness effects of a ductile adhesive by optical measurement techniques". International Journal of Adhesion and Adhesives 57 (2015): 125-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919608228&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.12.004
  69. Budhe, S.; Ghumatkar, A.; Birajdar, N.; Banea, M.D.. "Effect of surface roughness using different adherend materials on the adhesive bond strength". Applied Adhesion Science 3 1 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-85014137521&partnerID=MN8TOARS.
    10.1186/s40563-015-0050-4
  70. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". International Journal of Adhesion and Adhesives 54 (2014): 191-199. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903983437&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.06.008
  71. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method". International Journal of Adhesion and Adhesives 53 (2014): 15-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901986334&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.01.015
  72. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive". Journal of Adhesion 91 5 (2014): 331-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-84910090965&partnerID=MN8TOARS.
    10.1080/00218464.2014.903802
  73. Marques, E.A.S.; Da Silva, L.F.M.; Banea, M.D.; Carbas, R.J.C.. "Adhesive joints for low- and high-temperature use: An overview". Journal of Adhesion 91 7 (2014): 556-585. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919489787&partnerID=MN8TOARS.
    10.1080/00218464.2014.943395
  74. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications". Journal of Adhesion Science and Technology 28 14-15 (2014): 1367-1381. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899440602&partnerID=MN8TOARS.
    10.1080/01694243.2012.697388
  75. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.; Sato, C.. "Smart adhesive joints: An overview of recent developments". Journal of Adhesion 90 1 (2014): 16-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886678032&partnerID=MN8TOARS.
    10.1080/00218464.2013.785916
  76. Banea, M.D.; Silva, L.F.M.D.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921290337&partnerID=MN8TOARS.
  77. Campilho, R.D.S.G.; Fernandes, T.A.B.; Banea, M.D.; Silva, L.F.M.D.. "Cohesive Zone and Extended Finite Element modelling for bonded joint strength prediction". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921310067&partnerID=MN8TOARS.
  78. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method". Journal of Adhesion 89 7 (2013): 529-547. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876114008&partnerID=MN8TOARS.
    10.1080/00218464.2013.768106
  79. Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.B.P.; Da Silva, L.F.M.. "Modelling adhesive joints with cohesive zone models: Effect of the cohesive law shape of the adhesive layer". International Journal of Adhesion and Adhesives 44 (2013): 48-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874908653&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2013.02.006
  80. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Fracture toughness determination of adhesive and co-cured joints in natural fibre composites". Composites Part B: Engineering 50 (2013): 120-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877688451&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.01.025
  81. Campilho, R.D.S.G.; Banea, M.D.. "Selection of the most suitable CZM conditions in the finite element strength prediction of adhesive joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 33-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896497139&partnerID=MN8TOARS.
  82. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "An overview of the technologies for adhesive debonding on command". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 11-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896503151&partnerID=MN8TOARS.
  83. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Chaves, F.J.P.; da Silva, L.F.M.. "Feasibility of the extended finite element method for the simulation of composite bonded joints". 730-732 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84880983808&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.513
  84. Campilho, Raul D.S.G.; Chaves, Filipe J.P.; Pinto, Arnaldo M.G.; Banea, Mariana D.; da Silva, Lucas F.M.. "Influence of the Cohesive Law Parameters on the Strength Prediction of Adhesively-Bonded Joints". Materials Science Forum 730-732 (2012): 1000-1005. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.1000.
    10.4028/www.scientific.net/msf.730-732.1000
  85. Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.B.P.; Da Silva, L.F.M.. "Modelling of single-lap joints using cohesive zone models: Effect of the cohesive parameters on the output of the simulations". Journal of Adhesion 88 4-6 (2012): 513-533. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861122382&partnerID=MN8TOARS.
    10.1080/00218464.2012.660834
  86. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Innovative finite element techniques for strength prediction of bonded joints | Tehnici inovative de analiza cu elemente finite a rezistentei îmbinarilor lipite". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 26-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874208180&partnerID=MN8TOARS.
  87. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Optimization study of hybrid spot-welded/bonded single-lap joints". International Journal of Adhesion and Adhesives 37 (2012): 86-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861591998&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2012.01.018
  88. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on tensile strength and mode i fracture toughness of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 26 7 (2012): 939-953. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864683421&partnerID=MN8TOARS.
    10.1163/156856111X593649
  89. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "High temperature adhesives for aerospace applications,Adezivi rezistenti la temperaturi ridicate utilizati în aplicatii aerospatiale". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 16-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874217795&partnerID=MN8TOARS.
  90. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". Journal of Adhesion 88 4-6 (2012): 534-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861131754&partnerID=MN8TOARS.
    10.1080/00218464.2012.660835
  91. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Moulds design for adhesive bulk and joint specimens manufacturing". Assembly Automation 32 3 (2012): 284-292. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870263974&partnerID=MN8TOARS.
    10.1108/01445151211244456
  92. Banea, M.D.; De Sousa, F.S.M.; Da Silva, L.F.M.; Campilho, R.D.S.G.; De Pereira, A.M.B.. "Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 25 18 (2011): 2461-2474. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052615334&partnerID=MN8TOARS.
    10.1163/016942411X580144
  93. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Silva, R.F.; Da Silva, L.F.M.. "Strength improvement of adhesively-bonded joints using a reverse-bent geometry". Journal of Adhesion Science and Technology 25 18 (2011): 2351-2368. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052646241&partnerID=MN8TOARS.
    10.1163/016942411X580081
  94. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode i fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". International Journal of Adhesion and Adhesives 31 5 (2011): 273-279. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956128948&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.09.005
  95. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Comparative evaluation of bonded, welded and weldbonded structural joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 5-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859352202&partnerID=MN8TOARS.
  96. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mechanical characterization of a high temperature epoxy adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 58-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859324938&partnerID=MN8TOARS.
  97. Campilho, R.D.S.G.; Banea, M.D.; Chaves, F.J.P.; Silva, L.F.M.D.. "EXtended Finite Element Method for fracture characterization of adhesive joints in pure mode i". Computational Materials Science 50 4 (2011): 1543-1549. http://www.scopus.com/inward/record.url?eid=2-s2.0-79151484108&partnerID=MN8TOARS.
    10.1016/j.commatsci.2010.12.012
  98. Campilho, R.D.S.G.; Banea, M.D.; Pinto, A.M.G.; Da Silva, L.F.M.; De Jesus, A.M.P.. "Strength prediction of single- and double-lap joints by standard and extended finite element modelling". International Journal of Adhesion and Adhesives 31 5 (2011): 363-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956136790&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.09.008
  99. Banea, M.D.; Da Silva, L.F.M.. "Static and fatigue behaviour of room temperature vulcanising silicone adhesives for high temperature aerospace applications". Materialwissenschaft und Werkstofftechnik 41 5 (2010): 325-335. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953569344&partnerID=MN8TOARS.
    10.1002/mawe.201000605
  100. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Testing of RTV silicone adhesives for high temperature applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 21 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-79951686784&partnerID=MN8TOARS.
  101. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature dependence of the fracture toughness of adhesively bonded joints". Journal of Adhesion Science and Technology 24 11-12 (2010): 2011-2026. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956562666&partnerID=MN8TOARS.
    10.1163/016942410X507713
  102. Banea, M.D.; Da Silva, L.F.M.. "The effect of temperature on the mechanical properties of adhesives for the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 224 2 (2010): 51-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951684567&partnerID=MN8TOARS.
    10.1243/14644207JMDA283
  103. Banea, M.D.; da Silva, L.F.M.. "Mechanical characterization of flexible adhesives". Journal of Adhesion 85 4-5 (2009): 261-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349105063&partnerID=MN8TOARS.
    10.1080/00218460902881808
  104. Banea, M.; Da Silva, L.. "Experiments on single lap joints with flexible adhesives". Metalurgia International 14 SPEC. ISS. (2009): 139-142. http://www.scopus.com/inward/record.url?eid=2-s2.0-62749159003&partnerID=MN8TOARS.
  105. Banea, M.D.; Da Silva, L.F.M.. "Adhesively bonded joints in composite materials: An overview". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 223 1 (2009): 1-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649742908&partnerID=MN8TOARS.
    10.1243/14644207JMDA219
  106. Mircea, O.; Banea, M.D.; Visan, D.. "Thermal fields and residual stresses in numerically modelled and experimentally determined welded joints". Welding in the World 52 SPEC. ISS. (2008): 579-584. http://www.scopus.com/inward/record.url?eid=2-s2.0-49249085891&partnerID=MN8TOARS.
  107. Mircea, O.; Banea, D.M.; Constantin, E.; Visan, D.. "A numerical/experimental study of temperature fields in the X52 steel butt weld". Welding in the World 51 SPEC. ISS. (2007): 385-394. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547670477&partnerID=MN8TOARS.
Capítulo de livro
  1. Neto, Jorge S. S.; Queiroz, Henrique F. M. de; Banea, Mariana D.. "4 Recent developments in nanofillermodified natural fiber composites". In Cellulose Composites, 115-136. De Gruyter, 2023.
    10.1515/9783110768787-004
  2. Banea, M. D.; H.F.M. de Queiroz. Autor correspondente: Banea, M. D.. "Application of Structural Adhesives in Composite Connections". In Structural Adhesives: Properties, Characterizations and Applications, 375-396. 2023.
    Publicado
  3. Banea, Mariana D.; Neto, Jorge S. S.; Queiroz, Henrique F. M.. "Thermal Characterisation of Bio Fibre Composites". In Bio-Fiber Reinforced Composite Materials, 281-298. Springer Nature Singapore, 2022.
    10.1007/978-981-16-8899-7_16
  4. Banea, Mariana D.; Neto, Jorge S. S.; Cavalcanti, Daniel K. K.. "Thermal Analysis of Hybrid Epoxy/Synthetic/Natural Fiber Composites". In Handbook of Epoxy/Fiber Composites, 1-32. Springer Singapore, 2022.
    9789811581410
  5. Banea, Mariana D.; Neto, Jorge S. S.; Cavalcanti, Daniel K. K.. "Recent Trends in Surface Modification of Natural Fibres for Their Use in Green Composites". In Materials Horizons: From Nature to Nanomaterials, 329-350. Springer Singapore, 2021.
    Publicado • 10.1007/978-981-15-9643-8_12
  6. Banea, Mariana D.. "Dissimilar Joining of PMCs to Metals – Adhesive Bonding". In Encyclopedia of Materials: Composites, 324-333. Elsevier, 2021.
    10.1016/b978-0-12-819724-0.00061-6
  7. Banea, Mariana D.; Budhe, Sandip. "Water Sorption and Solvent Sorption Techniques of Epoxy/Synthetic/Natural Fiber Composites". In Handbook of Epoxy/Fiber Composites, 1-30. Springer Singapore, 2021.
    10.1007/978-981-15-8141-0_40-1
  8. Banea, M. D.. "Debonding of Structural Adhesive Joints". In Structural Adhesive Joints: Design, Analysis and Testing, K.L. Mittal and S. K. Panigrahi (eds.), 133-156. John Wiley & Sons (Scrivener Publishing LLC),, 2020.
    Publicado
  9. da Silva, Lucas F. M.; Carbas, Ricardo J. C.; Banea, Mariana D.. "Failure Strength Tests". In Handbook of Adhesion Technology, 489-521. Springer International Publishing, 2018.
    10.1007/978-3-319-55411-2_19
  10. Banea, M.D.. "Recent developments in modelling of adhesive bonded joints". 49-71. Nova Publishers, 2017.
    Publicado
  11. Banea, Mariana D.; da Silva, Lucas F. M.; Campilho, Raul D. S. G.. "Principles of Adhesive Bonding". In Joining of Polymer-Metal Hybrid Structures, 3-27. John Wiley & Sons, Inc, 2017.
    Publicado • 10.1002/9781119429807.ch1
  12. Campilho, Raul D. S. G.; da Silva, Lucas F. M.; Banea, Mariana D.. "Adhesive Bonding of Polymer Composites to Lightweight Metals". In Joining of Polymer-Metal Hybrid Structures, 29-59. John Wiley & Sons, Inc, 2017.
    Publicado • 9781119429807
Tese / Dissertação
  1. Banea, M. D.. "High temperature adhesives for aerospace applications". Doutoramento, Universidade do Porto Departamento de Engenharia Mecânica, 2011.
Atividades

Participação em evento

Descrição da atividade
Tipo de evento 		Nome do evento
Instituição / Organização
2023/12/18 - 2023/12/22 Programa ‘Mobilidade de Docente ERASMUS+ Universitatea "Dunarea de Jos" din Galati, Roménia
Outro
 Programa ‘Mobilidade de Docente ERASMUS+

Membro de associação

Nome da associação Tipo de participação
2014/01 - Atual Associação Brasileira de Adesão e Adesivos, Brazil.
2011/01 - Atual Society for Adhesion and Adhesives, UK
Distinções

Prémio

2012 Fundação Eng. António de Almeida Prize for 2011 best PhD thesis in Mechanical Engineering
2010 2010 SAGE Best Paper Award
2010 Donald Julius Groen Prize

Outra distinção

2019 Jovem Cientista do Nosso Estado - Concedido a pesquisadores de reconhecida liderança em sua área
Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro, Brasil
2016 Jovem Cientista do Nosso Estado - Concedido a pesquisadores de reconhecida liderança em sua área (Governo do Estado do Rio de Janeiro - Secretaria de Ciência e Tecnologia - FAPERJ)
2015 Research productivity scholarships
Conselho Nacional de Desenvolvimento Científico e Tecnológico, Brasil