???global.info.a_carregar???
Victor Neto is a researcher and teacher developing work on Product Development and Manufacturing Technologies, especially involving thermoplastics processing, eco-design, and nanoengineering. As a researcher and teacher, he is also very interested in matching scientific research, engineering education, and society (industry) challenges. His main professional activity is at the Department of Mechanical Engineering of the University of Aveiro (Portugal), where he has an associate professor position. He is a researcher at the Centre for Mechanical Technology and Automation (TEMA). He has over 100 papers published in international refereed journals and over 100 conference communications. He has been involved in several research projects, managing scientific events and science dissemination activities. Victor Neto has a BSc degree in Physics Engineering (2001); MSc in Applied Physics (2004), a PhD in Mechanical Engineering (2008), and a MSc in Management (2012). More information here: http://sweet.ua.pt/vneto
Read full resume ↓
Identification

Personal identification

Full name
VICTOR FERNANDO SANTOS NETO

Citation names

  • Neto, Victor
  • V. F. Neto

Author identifiers

Ciência ID
F916-3785-57ED
ORCID iD
0000-0003-1198-4220
Google Scholar ID
FpRpfZgAAAAJ
Researcher Id
B-9394-2008
Scopus Author Id
57193060301

Email addresses

  • vneto@ua.pt (Professional)

Telephones

Telephone
  • 234370200 Ext.: 23885 (Professional)

Addresses

  • Departamento de Engenharia Mecânica, Universidade de Aveiro, 3810-193, Aveiro, Aveiro, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English (Mother tongue)
Education
Degree Classification
2023/10/16 - 2023/10/17
Concluded
 Aggregation in Mechanical Engineering (Título de Agregado)
Universidade de Aveiro, Portugal
 Aprovado por unanimidade
2009/01/01 - 2014/02/10
Concluded
 Nanodiamond coatings for micro-injection injection tools (Pós-doutoramento)
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2012/12/14
Concluded
 Mestrado em Gestão (Mestrado)
Major in Gestão das Organizações
Universidade de Aveiro Departamento de Economia Gestão Engenharia Industrial e Turismo, Portugal
"Authenticity of the leaders and reactions of the led" (THESIS/DISSERTATION)
 16
2005/01/01 - 2008/12/16
Concluded
 Doutoramento em Engenharia Mecânica (Doutoramento)
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
"Carbon-based coatings for the modern plastics industry" (THESIS/DISSERTATION)
 Aprovado
2004/06/03
Concluded
 Mestrado em Física Aplicada (Mestrado)
Universidade de Aveiro Departamento de Física, Portugal
"Investigation on the film properties of advanced diamond coatings deposited using time-modulated CVD" (THESIS/DISSERTATION)
 Aprovado
2001/09/19
Concluded
 Licenciatura em Engenharia Física (Licenciatura)
Universidade de Aveiro Departamento de Física, Portugal
 13
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2024/01/01 - Current Associate Professor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
(...)
2018/05/07 - 2023/12/31 Assistant Professor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
(...)
2014/02/10 - 2018/05/06 Invited Assistant Professor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
(...)

Positions / Appointments

Category
Host institution 		Employer
2019/07/01 - 2021/05/30 Organic Unit Sub-director Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2018/07/01 - 2019/06/30 Vice-director of the Project Design and Engineering Master Course Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2013/05/01 - 2019/04/30 Vice-coordinator of the University of Aveiro Molding Technology Platform Universidade de Aveiro, Portugal
Universidade de Aveiro, Portugal
2015/02/01 - 2018/03/31 Organic Unit Sub-director Universidade de Aveiro, Portugal
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Projects

Grant

Designation Funders
2024/09/01 - 2026/08/31 Recycling Shoe – Advanced Education for Recycling and Circular Economy in the Shoe Industry (submitted)
TBA
Researcher
Universidade de Aveiro, Portugal

Centro Tecnologico do Calcado de Portugal, Portugal

PFI - Test and Research Institute Pirmasens, Germany

OIBS - National Chamber of Leather Industry , Poland

Lukasiewicz Research Network – Institute for Sustainable Technologies, Poland

Lodz University of Technology, Poland

Thomas Bata University , Czech Republic

Universitatea Tehnica Gheorghe Asachi din Iasi, Romania
Erasmus Plus
Submitted
2022/10/01 - 2025/09/30 PRODUTECH DIH
101083487
Co-Principal Investigator (Co-PI)
Universidade de Aveiro, Portugal

Produtech - Associação para as Tecnologias de Produção Sustentável, Portugal

Associação Fraunhofer Portugal Research, Portugal

Centro de Apoio Tecnológico à Indústria Metalomecânica, Portugal

Centro de Computação Gráfica, Portugal

Centitvc Centro de Nanotecnologia e Materiais Técnicos Funcionais e Inteligentes, Portugal

Centro Tecnológico da Cortiça, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Instituto de Engenharia de Sistemas e Computadores Tecnologia e Ciência, Portugal

Universidade de Coimbra Instituto de Sistemas e Robótica, Portugal

Instituto de Soldadura e Qualidade, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

International Iberian Nanotechnology Laboratory, Portugal

Pólo de Inovação em Engenharia de Polímeros, Portugal

UNINOVA Instituto de Desenvolvimento de Novas Tecnologias, Portugal

Universidade do Minho, Portugal

UPTEC Associação de Transferência de Tecnologia da Asprela, Portugal
European Commission
Ongoing
2020/05/01 - 2025/04/30 VForm-xSteels – Toward virtual forming and design: Thermomechanical characterization of advanced high strength steels through full-field measurements and a single designed test
888153
Researcher
Universidade de Aveiro, Portugal
Ongoing
2021/05/01 - 2023/06/30 GRASS-LIGHT - Filamento para Relva Sintética Sustentável, Fotoluminescente e Retroiluminada
47096
Principal investigator
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro CICECO, Portugal

Instituto de Telecomunicações Campus Universitário de Santiago, Portugal
Agência Nacional de Inovação SA
Ongoing
2021/03/01 - 2023/06/30 DDS – Desenvolvimento de nova geração de ferramentas com base em regras científicas para o Desempenho e Sustentabilidade
46977
Principal investigator
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
 Agência Nacional de Inovação SA
Ongoing
2021/01/01 - 2023/06/30 EcoBoard - Aplicação do Conceito de Circularidade à I&D de Nova Geração de Produtos de Comunicação Visual Sustentáveis
POCI-01-0247-FEDER-047741
Principal investigator
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro CICECO, Portugal
Agência Nacional de Inovação SA
Ongoing
2020/07/01 - 2023/06/30 S4PLAST - Sustainable Plastics Advanced Solutions
46089
Principal investigator
Agência Nacional de Inovação SA
Ongoing
2018/07/26 - 2021/07/25 BIvalves under Polluted Environment and ClImate chAnge
PTDC/CTA-AMB/28425/2017
Universidade de Aveiro, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2020 - 2021 THEI2.0 – Towards HEInnovate 2.0: From assessment to action
612868-EPP-1-2019-1-PT-EPPKA3-PI-FORWARD
Principal investigator
European Union
Ongoing
2017 - 2020 TOOLING4G – Advanced Tools for Smart Manufacturing,
POCI-01-0247-FEDER-024516
Principal investigator
Agência Nacional de Inovação SA
Ongoing
2017/01/01 - 2019 INTEGRA@TEC – Transferência de competências integradas e geradoras de inovação empresarial na Região Centro
CENTRO-01-0246-FEDER-000012)
Researcher
Universidade de Aveiro, Portugal
 Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluded
2015 - 2019 MultiscaleSolar – Multiscale in modelling and validation for solar photovoltaics
MP1406
Researcher
Concluded
2007/08 - 2011/01 Development of nanodiamond coated micromoulds for thermoplastics injection moulding
66227
Provided by PTCRIS: 66227
PTDC/EME-TME/66227/2006
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Fundação para a Ciência e a Tecnologia, I.P.

Fundação para a Ciência e a Tecnologia
Concluded

Contract

Designation Funders
2021/10/01 - 2025/12/31 ILLIANCE - Subproject SENSING HOME & EPS 100% reciclado
C644919832-00000035
C644919832-00000035
Researcher
Universidade de Aveiro, Portugal
 Agência Nacional de Inovação SA
Ongoing
2021/01/01 - 2025/12/31 Laboratório Associado de Sistemas Inteligentes / Intelligent Systems Associate Laboratory
10.54499/LA/P/0104/2020
Researcher
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade Nova de Lisboa Centro de Tecnologias e Sistemas, Portugal

Instituto Politécnico do Porto Centro de Investigação em Sistemas Computacionais Embebidos e de Tempo-Real, Portugal

Universidade do Minho, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Universidade do Porto Centro de Matemática, Portugal

Instituto Politécnico do Cávado e do Ave, Portugal

Universidade do Porto Laboratório de Inteligência Artificial e Ciência de Computadores, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade de Aveiro Instituto de Engenharia Eletrónica e Informática de Aveiro, Portugal

Universidade do Minho Centro ALGORITMI, Portugal

Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Informatica e Sistemas, Portugal

Universidade de Aveiro, Portugal

Instituto Politécnico do Porto Grupo de Investigação em Engenharia e Computação Inteligente para a Inovação e o Desenvolvimento, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade NOVA de Lisboa, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2022/01/01 - 2023/12/31 Curriculo de engenharia para a Sociedade - EC4uS
EXPL/CED-EDG/1009/2021
10.54499/EXPL/CED-EDG/1009/2021
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

William James Center for Research, Portugal

Universidade de Aveiro, Portugal

Centro de Investigação de Políticas do Ensino Superior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2020/03 - 2021/07 CORMOL ¿ Evaluation of the state of the art in the sector and evaluation of the implementation of ISO 56002: 2019 in the company
CORMOL
 N/A
2019/01/01 - 2019/12/31 Centro de Tecnologia Mecânica e Automação
UID/EMS/00481/2019
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2012/05/01 - 2015/09/30 Fabrication of large-area Epitaxial Graphene by Chemical Vapor Deposition for device applications
PTDC/CTM-NAN/121108/2010
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/04/01 - 2015/09/30 High performance ZnO based back reflectors for thin film solar cell applications
PTDC/CTM-CER/121440/2010
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013/07 - 2014/12 CarbonInspired 2.0
SOE4/P1/E793
 SUDOE Territorial Cooperation Programme
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 481 - 2011-2012
PEst-C/EME/UI0481/2011
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2008/06/30 Carbon-based high performance coatings for the plastic mould industry
POCI/EME/60816/2004
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2008/06/30 Melt processing multi-walled carbon nanotube/high density polyethylene (CNT/UHMWPE) for orthopaedic implants
POCI/EME/56040/2004
Universidade de Aveiro, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2024/01/01 - 2025/12/31 ILLIANCE energy efficiency
10.54499/LA/P/0104/2020
Ongoing
Outputs

Publications

Book
  1. Bastos, António; Completo, António; Neto, Fernando; Oliveira, João; Simões, Raul; Valente, Robertt; Neto, Victor. TEMA: livro de serviços. UA Editora. 2018.
  2. Bdikin, Igor; Neto, Victor Fernando Santos. International Conference on Nanomaterials Science and Mechanical Engineering: book of abstracts. UA Editora. 2018.
  3. Gabriel, Bárbara Filipa Casqueira Coelho; Campos, António Gil d'Orey de Andrade; Oliveira, João Alexandre Dias de; Nascimento, Maria Manuel; Valente, Robertt; Neto, Victor Fernando Santos. Changing higher education one teacher at a time: book of abstracts of the Third International Conference of the Portuguese Society for Engineering Education. UA Editora. 2018.
  4. Schincariol, S.; Fonseca, M.; Neto, V.; Simone Schincariol; Maria Alexandra Fonseca; Neto, Victor. Development of a nanopaint for polymeric auto components. Springer. 2017.
    10.1007/978-3-319-67132-1_7
Book chapter
  1. Sofia B. Rocha; Gonçalo Martins; Victor Neto; Mónica S. A. Oliveira. "Towards an Automatic Strategy for Conformal Cooling Design". 2024.
    10.1007/978-3-031-38241-3_53
  2. Cadete, Mylene; Sofia Barroca Monteiro Aleixo Rocha; Yinyun Wu; Maria Fonseca; Neto, Victor. "Life Cycle Analysis of Polymer Nanocomposites". In Chemical Physics of Polymer Nanocomposites: Processing, Morphology and Applications. John Wiley& Sons, 2023.
    Accepted
  3. Victor Neto; Henrique Bessa; Ricardo Ferreira de Mascarenhas. "Applying Gamification Strategies to Create Training in Lean Methodologies". In A Practical Case, 293-313. {IGI, 2022.
    10.4018/978-1-7998-9223-6.ch014
  4. Cadete, Mylene S.; Gomes, Tiago E. P.; Costa, Alfredo; Fonseca, Maria; Dias-de-Oliveira, João; Neto, Victor. "Polymer Matrix Nanocomposites for 3D Printing". In Progress in Digital and Physical Manufacturing, 183-188. Springer International Publishing, 2019.
    10.1007/978-3-030-29041-2_23
  5. Bárbara Gabriel; António Andrade-Campos; João Dias-de-Oliveira; Robertt Valente; Neto, Victor. "Assessing Entrepreneurship and Innovation in Higher Education Institutions: The ’HEInnovate’ Initiative at the Universidade de Aveiro, Portugal". In Contemporary Drivers of Local Development, 441-451. Maribor: Institute for Local Self-Government, 2019.
    Published
  6. Bárbara Gabriel; Robertt Valente; João Dias-de-Oliveira; Neto, Victor; António Andrade-Campos. "Methodologies for Engineering Learning and Teaching (MELT): An Overview of Engineering Education in Europe and a Novel Concept for Young Students". In Handbook of Research on Entrepreneurial Development and Innovation within Smart Cities, 363-391. IGI Global, 2017.
    Accepted
  7. B?rbara F. Gabriel; Robertt A. Valente; Jo?o Dias-de-Oliveira; Victor F. Neto; Ant?nio Andrade-Campos. "Methodologies for Engineering Learning and Teaching (MELT)". In An Overview of Engineering Education in Europe and a Novel Concept for Young Students. United States, 2017.
    10.4018/978-1-5225-1978-2.ch016
  8. Oliveira, Mnica; Neto, Victor; Fonseca, Maria; Zhiltsova, Tatiana; Grcio, Jos; V. F. Neto; M.A. Fonseca; et al. "Microinjection Molding of Enhanced Thermoplastics". In Thermoplastic Elastomers. InTech, 2012.
    10.5772/35680
Conference abstract
  1. Cadete, Mylene; Gonçalves, Idalina; Neto, Victor. "The influence of 3D printing parameters on the control of morphing behavior in 4D printing". Paper presented in 8th European Congress on 3D Printing & Additive Manufacturing, Amsterdam, 2023.
    Published
  2. Tiago E. P. Gomes; Dias-de-Oliveira, João; Neto, Victor. Corresponding author: Tiago E. P. Gomes. "Reprocessed PLA filament extrusion: In-process degradation assessment and mitigation through a soft sensor". Paper presented in 8th European Congress on 3D Printing & Additive Manufacturing, 2023.
    Published
  3. Zhiltsova T.V.; Rodrigo M. C. Bernardo; V. F. Neto; J. F. Caseiro; P. Santos; J. Laranjeira; Jorge A. F. Ferreira. Corresponding author: Zhiltsova T.V.. "Evaluation of the Injection Mold Performance Through the In-Situ Instrumentation and Data Acquisition System". Paper presented in TEchMA 2023¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Published • 10.48528/tspw-yj21
  4. Pedro Leite; Correia, Carlos M. ; Neto, Victor; Zhiltsova, Tatiana; Gonçalves, Idalina; Nuno Gama; Paula Ferreira. Corresponding author: Pedro Leite. "Recovering of recycled expanded polystyrene via extrusion". Paper presented in TEchMA2023 ¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Published • 10.48528/tspw-yj21
  5. J. Pereira ; L. Suarés; S. Lopes ; J. F. Caseiro; V. F. Neto; Zhiltsova T.V.; P. Santos. Corresponding author: J. F. Caseiro. "Machine Learning for the Geometric Optimization of Injection Moulds". Paper presented in TEchMA2023 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Published • 10.48528/tspw-yj21
  6. Tiago E. P. Gomes; Magalhães da Silva, Sara; Oliveira, JM; Dias-de-Oliveira, João; Neto, Victor. Corresponding author: Tiago E. P. Gomes. "Non-destructive reprocessed PLA degradation evaluation and control in FFF filament extrusion". Paper presented in TEchMA: 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Published
  7. Cadete, Mylene; Gonçalves, Idalina; Neto, Victor. "4D Printing: Can additives influenece the morphing performance of PLA-based materials?". Paper presented in TEchMA2023: 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Published
  8. Correia, Carlos M. ; José C. Almeida; Luís Coelho; Neto, Victor; Gonçalves, Idalina. Corresponding author: Correia, Carlos M.. "Lightweight biocomposites for a new generation of circular economy-enabled visual communication boards". Paper presented in TEchMA 2023 ¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Submitted
  9. Rocha, Sofia B.; Neto, Victor; Dias-de-Oliveira, João. "InovDesign - A self assessment tool for product design and development". Paper presented in TEchMA2023 ¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2023.
    Published
  10. Correia, Carlos M. ; José C. Almeida; Luís Coelho; Neto, Victor; Gonçalves, Idalina. Corresponding author: Correia, Carlos M.. "Thermoplastic starch/PLA/CaCO3-based biocomposite for a multifunctional and circular economy-enabled visual communication board". Paper presented in Materiais 2023 ¿ XXI Congresso da Sociedade Portuguesa de Materiais and XII International Symposium on Materials, Guimarães, 2023.
    Accepted
  11. Cadete, Mylene; Gonçalves, Idalina; Neto, Victor. "Influence of 3D printing parameters on PLA's morphing ability: from design of experiments to practical work". Paper presented in 2nd International Conference on Polymer Process Innovation - PPI, Lavrion, 2022.
    Published
  12. Correia, Carlos M. ; Neto, Victor; Gonçalves, Idalina. Corresponding author: Correia, Carlos M.. "Continuous processing of density graded and rigid thermoplastic bio-foams". Paper presented in Research Summit 2022 - Research Forum of the University of Aveiro, Aveiro, 2022.
    Published
  13. Tiago E. P. Gomes; Dias-de-Oliveira, João; Neto, Victor. "Prediction of mechanical properties of parts produced from reprocessed thermoplastics within an additive manufacturing framework". Paper presented in TEchMA2022: 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2022.
    Published
  14. Correia, Carlos M. ; Luís Coelho; João Oliveira; Bárbara Gabriel; Neto, Victor. Corresponding author: Neto, Victor. "Development of sustainable visual communication boards based on circular economy principles and environmental performance evaluation". Paper presented in TEchMA2022 ¿ 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2022.
    Published • 10.48528/2smr-sn15
  15. Rocha, Sofia B.; Dias-de-Oliveira, João; Oliveira, Mónica S.A.; Neto, Victor. "Life Cycle Analysis of a plastic toilet cistern - tradition processing vs. recycled processing". Paper presented in TechMA2022 ¿ 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Aveiro, 2022.
    Published
  16. Dina Gamelas; Mylene S. Cadete; Tiago E. P. Gomes; Neto, Victor. "4D Printing: Development of fused filament fabrication structures with the ability to shape-shift". Paper presented in TEchMA2021 – 4rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions,, Aveiro, 2021.
    Published
  17. Adriana S. Martins; Mylene S. Cadete; Tiago E. P. Gomes; Susana Gonçalves; Anabela Dias; Neto, Victor. "Development of 4D structures for custom bolus production for external radiotherapy". Paper presented in TEchMA2020 – 3rd International Conference on Technologies for the Wellbeing and Sustainable, Aveiro, 2020.
    Published
  18. Gomes, Tiago; Cadete, Mylene; Dias-de-Oliveira, João; Neto, Victor. "Enabling closed loop additive manufacturing through an on-demand feedstock material customization system". Paper presented in 2nd International Conference of TEMA: Mobilizing Projects, Aveiro, 2019.
    Published
Conference paper
  1. Cláudia Figueiredo; Carla Ferreira; Bárbara Gabriel; Robertt Valente; João Dias Oliveira; Victor Neto; António Andrade-Campos; Teresa Carvalho; Sandra C. Soares. "Current and future challenges for Engineering Education: voices from students, alumni, teachers and employers". 2023.
    10.1109/cispee58593.2023.10227652
  2. S. Tavares; B. C. Gabriel; R. Valente; J. Oliveira; C. Relvas; P. Prates; R. Sousa; et al. "Enhancing engineering education by means of the promotion of entrepreneurial mindsets and attitudes for societal challenges". 2023.
    10.1109/cispee58593.2023.10227655
  3. Rodrigo M. C. Bernardo; Zhiltsova, Tatiana; Oliveira, Mónica S.A.; Neto, Victor; João Caseiro; Jorge Laranjeira; Andrade-Campos, António; Jorge A. F. Ferreira. Corresponding author: Rodrigo M. C. Bernardo. "Instrumentation and In-mould Data Acquisition System for Injection Moulding Process". Paper presented in 2023 4th International Conference on Artificial Intelligence, Robotics and Control (AIRC), Cairo, 2023.
    Published • 10.1109/AIRC57904.2023.10303047
  4. Sofia B. Rocha; I. M. Praça; Dias-de-Oliveira, João; M. S. A. Oliveira; A. Costa; V. F. Neto. "Improving the environmental performance of a plastic toilet cistern by reintroducing reprocessed plastic". Paper presented in MATERIAIS 2023-XXI Congresso da Sociedade Portuguesa de Materiais, and XII International Materials Symposium, Guimarães, 2023.
  5. Victor Neto; Gil Andrade-Campos; Bárbara Gabriel; João Dias-de-Oliveira; Mariana Nunes; Robertt Valente. "A STUDY ON THE ALIGNMENT OF EXPECTATIONS BETWEEN HEI AND SOCIETY, USING ENGINEERING EDUCATION AS A CASE STUDY". 2020.
    10.21125/iceri.2020.0933
  6. Tiago E. P. Gomes; Mylene S. Cadete; João Dias-de-Oliveira; Neto, Victor; Gomes, Tiago; Cadete, Mylene; Dias-de-Oliveira, João. "A Method for the Prediction of Mechanical Properties of Parts Produced by Fused Filament Fabrication". Paper presented in CMN2019 – Congress on Numerical Methods in Engineering, Guimarães, 2019.
    Published
  7. Gomes, Tiago; Dias-de-Oliveira, João; Neto, Victor. "Using recycled polymers for fused filament fabrication applications". Paper presented in 8th Bi-Annual PMI2018 International Conference on Polymers and Moulds Innovations, Guimarães, 2018.
    Published
  8. RÚBEN SILVA; Neto, Victor; Artur J S Mateus. Corresponding author: RÚBEN SILVA. "Novas perspetivas no desenvolvimento de novos produtos através de fabrico aditivo". Paper presented in UD18 - 7º Encontro de Doutoramentos em Design, aveiro, 2018.
    Published
  9. Andrade-Campos, Antonio; Gabriel, Barbara; Moreira, Gillian Owen; Dias-de-Oliveira, Joao; Valente, Robertt; Neto, Victor. "Towards Excellence in Engineering Education The profile of Higher Education Teachers on Engineering Programs". 2018.
    10.1109/cispee.2018.8593382
  10. Zhiltsova, Tatiana; Neto, Victor; Oliveira, Mónica S.A.; Daga, B.; Frontini, P. M. "Mechanical testing of micro moulded parts by nanoindentation". Paper presented in 7th International Conference PMI2016, Ghent, 2016.
    Published
  11. Gabriel, B.; Valente, R.; Dias-De-Oliveira, J.; Neto, V.; Andrade-Campos, A.. "Methodologies for Engineering Learning and Teaching (MELT) approach: A way to bring young people to science (and science to young people)". 2016.
    10.1109/CISPEE.2016.7777724
  12. Gabriel, B.; Andrade-Campos, A.; Dias-De-Oliveira, J.; Valente, R.; Neto, V.. "Open think-tank on engineering education: A forum of "face-to-face" debate between stakeholders". 2016.
    10.1109/CISPEE.2016.7777744
  13. Alberto, N.J.; Kalinowski, H.J.; Neto, V.F.; Nogueira, R.N.. "Simultaneous regeneration of seed FBGs during the HFCVD diamondgrating coating process and its thermal monitoring". 2015.
    10.1117/12.2194817
  14. Santos, C.S.C.; Gabriel, B.; Blanchy, M.; Menes, O.; García, D.; Blanco, M.; Arconada, N.; Neto, V.. "Industrial Applications of Nanoparticles - A Prospective Overview". 2015.
    10.1016/j.matpr.2015.04.056
  15. Titus, E.; Neto, V.. "Editorial". 2015.
    10.1016/S2214-7853(15)00105-4
  16. Alberto, N.; Vigário, C.; Duarte, D.; Almeida, N.A.F.; Gonçalves, G.; Pinto, J.L.; Marques, P.A.A.P.; Nogueira, R.; Neto, V.. "Characterization of Graphene Oxide Coatings onto Optical Fibers for Sensing Applications". 2015.
    10.1016/j.matpr.2015.04.019
  17. Simões, R.; Neto, V.F.. "Nanodiamond Coated Glass as a Protective Layer in Solar Cells". 2015.
    10.1016/j.matpr.2015.04.027
  18. Santos, C.S.C.; Neto, V.F.. "Nanostructured Coatings in Micromoulding Injection - A Case Study". 2015.
    10.1016/j.matpr.2015.04.048
  19. M.A. Fonseca; N. Alberto; B. Silva; V. F. Neto; R. Nogueira; M. S. A. Oliveira; R.A.S. Moreira. "Utilização de redes de Bragg em fibras óticas para caracterização da memória de forma de poliuretano reforçados com nanotubos de carbono". Paper presented in Congresso Nacional de Mecânica Experimental CNME 2014, Aveiro, 2014.
    Published
  20. Alberto, N.J.; Nogueira, R.N.; Neto, V.F.. "Thermal monitoring of the thermoplastic injection molding process with FBGs". 2014.
    10.1117/12.2064167
  21. Alberto, N.J.; Kalinowski, H.J.; Neto, V.F.; Nogueira, R.N.. "Regeneration of FBGs during the HFCVD diamond-fiber coating process". 2014.
    10.1117/12.2063377
  22. Alberto, N.J.; Simões, R.; De Oliveira, V.; Kalinowski, H.J.; Neto, V.F.; Nogueira, R.N.. "Thermal monitoring of the diamond deposition process using regenerated FBG". 2013.
    10.1117/12.2026011
  23. Simoes, R.; Neto, V.F.; Mendes, J.C.; Pereira, L.. "Diamond and other carbon related materials applications in photovoltaic solar cells". 2013.
    10.1109/EIT.2013.6632676
  24. Zhiltsova, Tatiana; Oliveira, Mónica S.A.; Vasco, Joel C; Pontes, António J.; A. S. Pouzada; J.A. Ferreira; J. Grácio; V. F. Neto. "Advanced coating systems towards the analysis of polymer flow within microcavities". Paper presented in 5th International Conference PMI2012, Ghent, 2012.
    Published
  25. Alberto, N.J.; Santos, J.A.; Marques, C.A.F.; Neto, V.F.S.; Nogueira, R.N.. "Nanodiamond coated Bragg gratings for sensing applications". 2012.
    10.1117/12.974993
  26. Neto, V.F.; Oliveira, M.S.A.; Grácio, J.. "Performance of nanocrystalline diamond coated micromolding tools". 2011.
  27. Zhiltsova, Tatiana; Oliveira, Mónica S.A.; Neto, Victor. "On the suitability of the conventional injection moulding process for micro featured parts replication - a doe approach". Paper presented in ICIT&MPT 2009, Ljubljana, 2009.
    Published
  28. Zhiltsova, Tatiana; Oliveira, Mónica S.A.; Neto, Victor; Fonseca, Maria Alexandra Lopes da. "Numerical Simulation of a PBT Component with Molded-in Metal Insert". Paper presented in International Conference PMI2008, Ghent, 2008.
    Published
  29. Ali, N.; Neto, V.F.; Kousar, Y.; Gracio, J.. "Modulating CH4 flow during the fabrication of improved CVD diamond coatings". 2003.
Conference poster
  1. Gomes, Tiago; Magalhães da Silva, Sara; Martinho Oliveira; Dias-de-Oliveira, João; Neto, Victor. "Effects of 1,3-phenylene-bis-oxazoline (PBO) chain extender on the rheological and thermal properties of reprocessed polylactic acid (PLA)". Paper presented in Science Meeting 2023: ¿Science and the Ocean Beyond the Horizon, 2023.
  2. Tiago E. P. Gomes; Dias-de-Oliveira, João; Neto, Victor. Corresponding author: Tiago E. P. Gomes. "Using machine learning to predict mechanical properties of reprocessed PLA". Paper presented in Ciência 2022 Encontro com a Ciência e Tecnologia em Portugal, 2022.
  3. Cadete, Mylene; Gonçalves, Idalina; Neto, Victor. "Development of predictive tools for controlling the polymers morphing behavior in 4D printing". Paper presented in Encontro de Ciência e Tecnologia em Portugal, 2022.
  4. Rocha, Sofia B.; Neto, Victor; Oliveira, Mónica S.A.. "Coupling tool to assist mold design and engineering during hybrid fabrication". Paper presented in Ciência 2022, 2022.
  5. Prior, Laura; Oliveira, Mónica S.A.; Neto, Victor. "Generative design to model metamaterial devices using reprocessed plastics". Paper presented in Encontro de Ciência e Tecnologia em Portugal, 2022.
  6. Rocha, Sofia B.; Neto, Victor; Oliveira, Mónica S.A.. "Coupling tool to assist design and engineering of mold temperature control systems by topology optimization and hybrid fabrication". Paper presented in Ciência 2021, 2021.
  7. Neto, Victor; Fonseca, Maria Alexandra Lopes da; Zhiltsova, Tatiana; Moreira, R.A.S.; Simões, J. A. O.; Ferreira, J.; Oliveira, Mónica; Grácio, J. "u-injection molding of enhanced thermoplastics". Paper presented in Research Day 2012, 2012.
Journal article
  1. Simões, Raul; Rodrigues, Joana; Neto, Victor; Monteiro, Teresa; Gonçalves, Gil. "Carbon Dots: A Bright Future as Anticounterfeiting Encoding Agents". Small (2024): http://dx.doi.org/10.1002/smll.202311526.
    10.1002/smll.202311526
  2. Cadete, Mylene; Gomes, Tiago; Gonçalves, Idalina; Neto, Victor. Corresponding author: Cadete, Mylene. "Influence of 3D printing deposition parameters on crystallinity and morphing properties of PLA-based materials". Progress in Additive Manufacturing (2024):
    Accepted
  3. Tiago E. P. Gomes; Mylene S. Cadete; Jorge A. F. Ferreira; Renato Febra; João Silva; Tiago Noversa; António J. Pontes; Victor Neto. "Development of an Open-Source Injection Mold Monitoring System". Sensors (2023): https://doi.org/10.3390/s23073569.
    10.3390/s23073569
  4. Daniel K. K. Cavalcanti; Jorge S. S. Neto; Henrique F. M. de Queiroz; Yiyun. Wu; Victor F. S. Neto; Mariana D. Banea. "Development and Mechanical Characterization of Short Curauá Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling". Polymers (2022): https://doi.org/10.3390/polym14225047.
    10.3390/polym14225047
  5. Mylene S. Cadete; Tiago E.P. Gomes; Idalina Gonçalves; Victor Neto; Mylene S. Cadete; Tiago E. P. Gomes; Gonçalves, Idalina; Neto, Victor. "Controlling Morphing Behavior in 4D Printing: A Review About Microstructure and Macrostructure Changes in Polylactic Acid". 3D Printing and Additive Manufacturing (2022): https://doi.org/10.1089/3dp.2022.0088.
    Submitted • 10.1089/3dp.2022.0088
  6. Sofia B. Rocha; Tatiana Zhiltsova; Victor Neto; Mónica S. A. Oliveira. "Optimization to Assist Design and Analysis of Temperature Control Strategies for Injection Molding—A Review". Materials 15 12 (2022): 4048-4048. https://doi.org/10.3390/ma15124048.
    10.3390/ma15124048
  7. Wu, Yiyun; Wang, Kui; Neto, Victor; Peng, Yong; Valente, Robertt; Ahzi, Said. "Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect". International Journal of Material Forming 15 3 (2022): http://dx.doi.org/10.1007/s12289-022-01667-7.
    10.1007/s12289-022-01667-7
  8. Carlos Correia; Tiago E. P. Gomes; Idalina Gonçalves; Victor Neto. "Reprocessability of PLA through Chain Extension for Fused Filament Fabrication". Journal of Manufacturing and Materials Processing 6 1 (2022): 26-26. https://doi.org/10.3390/jmmp6010026.
    10.3390/jmmp6010026
  9. Gomes, Tiago EP; Cadete, Mylene S.; Dias-de-Oliveira, João; Neto, Victor. "Controlling the properties of parts 3D printed from recycled thermoplastics: A review of current practices". Polymer Degradation and Stability 196 (2022): 109850. http://dx.doi.org/10.1016/j.polymdegradstab.2022.109850.
    10.1016/j.polymdegradstab.2022.109850
  10. Cadete, Mylene S; Gomes, Tiago EP; Carvalho, Pedro J; Neto, Victor F. "Polymeric foams from recycled thermoplastic poly(ethylene terephthalate)". Journal of Cellular Plastics (2020): 0021955X2094856. http://dx.doi.org/10.1177/0021955x20948562.
    10.1177/0021955x20948562
  11. Amanda Franco; Ana Raquel Simões; Alberto Costa; Sónia P. M. Ventura; Neto, Victor; Vânia Carlos; Betina Silva Lopes; et al. "“Só para ensinar” ou “mais para aprender”? Reflexões, entre pares, sobre as (próprias) práticas pedagógicas no ensino superior: Análise das perceções dos professores sobre um programa de observação por pares". Indagatio Didactica 12 3 (2020): 123-140. https://doi.org/10.34624/id.v12i3.20058.
    Published
  12. Neto, Victor. "Industrial challenge assignment in curricular context". Millenium – Journal of Education, Technologies, and Health 11 2 (2020): 11. https://doi.org/10.29352/mill0211.10.00256.
    Published
  13. María J. Hortigüela; Denise Machado; Igor Bdikin; Victor Neto; Gonzalo Otero-Irurueta. "Chemical Changes of Graphene Oxide Thin Films Induced by Thermal Treatment under Vacuum Conditions". Coatings 10 2 (2020): 113-113. https://doi.org/10.3390/coatings10020113.
    10.3390/coatings10020113
  14. Franco, Amanda; Vieira, Rui Marques; Simões, Ana Raquel; Costa, Alberto; Ventura, Sónia P. M.; Neto, Victor; Carlos, Vânia; et al. "Is it “just to teach” or is it “more to learn”? Reflections, among peers, about (their own) pedagogical practices in higher education: Analysis of teachers’ perceptions about a peer observation of teaching program". (2020): https://doi.org/10.34624/id.v12i3.20058.
    https://doi.org/10.34624/id.v12i3.20058
  15. Machado, Denise; Hortigüela, Maria J.; Otero-Irurueta, Gonzalo; Marques, Paula A.A.P.; Silva, Ricardo; Silva, Rui F.; Neto, Victor. "Graphene Based Sensors for Air Quality Monitoring – Preliminary Development Evaluation". Journal of Coating Science and Technology 6 1 (2019): 10-21. http://dx.doi.org/10.6000/2369-3355.2019.06.01.2.
    10.6000/2369-3355.2019.06.01.2
  16. B. Barroqueiro; A. Andrade-Campos; R. A. F. Valente; V. Neto. "Metal Additive Manufacturing Cycle in Aerospace Industry: A Comprehensive Review". Journal of Manufacturing and Materials Processing (2019): https://doi.org/10.3390/jmmp3030052.
    10.3390/jmmp3030052
  17. Neto, Victor. "Eco-design and Eco-efficiency Competencies Development in Engineering and Design Students". Education Sciences 9 2 (2019): 126. http://dx.doi.org/10.3390/educsci9020126.
    Published • 10.3390/educsci9020126
  18. De Marchi, Lucia; Pretti, Carlo; Chiellini, Federica; Morelli, Andrea; Neto, Victor; Soares, Amadeu M.V.M.; Figueira, Etelvina; Freitas, Rosa. "Impacts of ocean acidification on carboxylated carbon nanotube effects induced in the clam species Ruditapes philippinarum". Environmental Science and Pollution Research 26 20 (2019): 20742-20752. http://dx.doi.org/10.1007/s11356-019-05306-8.
    Published • 10.1007/s11356-019-05306-8
  19. Lucia De Marchi; Victor Neto; Carlo Pretti; Federica Chiellini; Andrea Morelli; Amadeu M.V.M. Soares; Etelvina Figueira; Rosa Freitas. "The influence of Climate Change on the fate and behavior of different carbon nanotubes materials and implication to estuarine invertebrates". Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology 219 (2019): 103-115. https://doi.org/10.1016/j.cbpc.2019.02.008.
    10.1016/j.cbpc.2019.02.008
  20. Lucia De Marchi; Carlo Pretti; Federica Chiellini; Andrea Morelli; Victor Neto; Amadeu M.V.M. Soares; Etelvina Figueira; Rosa Freitas. "The influence of simulated global ocean acidification on the toxic effects of carbon nanoparticles on polychaetes". Science of The Total Environment 666 (2019): 1178-1187. https://doi.org/10.1016/j.scitotenv.2019.02.109.
    10.1016/j.scitotenv.2019.02.109
  21. Lucia De Marchi; Matteo Oliva; Rosa Freitas; Victor Neto; Etelvina Figueira; Federica Chiellini; Andrea Morelli; Amadeu M.V.M. Soares; Carlo Pretti. "Toxicity evaluation of carboxylated carbon nanotubes to the reef-forming tubeworm Ficopomatus enigmaticus (Fauvel, 1923)". Marine Environmental Research 143 (2019): 1-9. https://doi.org/10.1016/j.marenvres.2018.10.015.
    10.1016/j.marenvres.2018.10.015
  22. Lucia De Marchi; Victor Neto; Carlo Pretti; Federica Chiellini; Andrea Morelli; Amadeu M.V.M. Soares; Etelvina Figueira; Rosa Freitas. "Does the exposure to salinity variations and water dispersible carbon nanotubes induce oxidative stress in Hediste diversicolor?". Marine Environmental Research 141 (2018): 186-195. https://doi.org/10.1016/j.marenvres.2018.08.014.
    10.1016/j.marenvres.2018.08.014
  23. De Marchi, Lucia; Neto, Victor; Pretti, Carlo; Figueira, Etelvina; Chiellini, Federica; Morelli, Andrea; Soares, Amadeu M. V. M.; Freitas, Rosa. "The influence of salinity on the effects of Multi-walled carbon nanotubes on polychaetes". Scientific Reports 8 1 (2018): http://dx.doi.org/10.1038/s41598-018-26729-2.
    Published • 10.1038/s41598-018-26729-2
  24. Lucia De Marchi; Victor Neto; Carlo Pretti; Etelvina Figueira; Federica Chiellini; Andrea Morelli; Amadeu M.V.M. Soares; Rosa Freitas. "Effects of multi-walled carbon nanotube materials on Ruditapes philippinarum under climate change: The case of salinity shifts". Aquatic Toxicology 199 (2018): 199-211. https://doi.org/10.1016/j.aquatox.2018.04.001.
    10.1016/j.aquatox.2018.04.001
  25. Raul Simões; Bruno Martins; José Santos; Victor Neto. "HFCVD Diamond-Coated Mechanical Seals". Coatings (2018): https://doi.org/10.3390/coatings8050172.
    10.3390/coatings8050172
  26. De Marchi, L.; Neto, V.; Pretti, C.; Figueira, E.; Chiellini, F.; Morelli, A.; Soares, A.M.V.M.; Freitas, R.. "Toxic effects of multi-walled carbon nanotubes on bivalves: Comparison between functionalized and nonfunctionalized nanoparticles". Science of the Total Environment 622-623 (2018): 1532-1542. http://www.scopus.com/inward/record.url?eid=2-s2.0-85031724755&partnerID=MN8TOARS.
    10.1016/j.scitotenv.2017.10.031
  27. De Marchi, L.; Pretti, C.; Gabriel, B.; Marques, P.A.A.P.; Freitas, R.; Neto, V.. "An overview of graphene materials: Properties, applications and toxicity on aquatic environments". Science of the Total Environment 631-632 (2018): 1440-1456. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043996048&partnerID=MN8TOARS.
    10.1016/j.scitotenv.2018.03.132
  28. De Marchi, L.; Neto, V.; Pretti, C.; Figueira, E.; Chiellini, F.; Soares, A.M.V.M.; Freitas, R.. "The impacts of emergent pollutants on Ruditapes philippinarum: biochemical responses to carbon nanoparticles exposure". Aquatic Toxicology 187 (2017): 38-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016420981&partnerID=MN8TOARS.
    10.1016/j.aquatox.2017.03.010
  29. Zhiltsova, T.; Daga, B.; Frontini, P.; Neto, V.; Oliveira, M.. "Mechanical testing of micromolded plastic parts by nanoindentation". Polymer Engineering and Science (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85037982358&partnerID=MN8TOARS.
    10.1002/pen.24799
  30. De Marchi, L.; Neto, V.; Pretti, C.; Figueira, E.; Chiellini, F.; Soares, A.M.V.M.; Freitas, R.. "Physiological and biochemical responses of two keystone polychaete species: Diopatra neapolitana and Hediste diversicolor to Multi-walled carbon nanotubes". Environmental Research 154 (2017): 126-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008391989&partnerID=MN8TOARS.
    10.1016/j.envres.2016.12.018
  31. Titus, E.; Ventura, J.; Gil, J.C.; Neto, V.; Singh, A.; Chaudhari, A.; Rangel, C.M.. "Preface to the special issue on “The 1st international conference on Advanced Energy Materials (AEM2016), 12–14 September 2016, Surrey, England”". International Journal of Hydrogen Energy 42 37 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85028081627&partnerID=MN8TOARS.
    10.1016/j.ijhydene.2017.08.008
  32. Zeng, A.; Shrestha, M.; Wang, K.; Neto, V.F.; Gabriel, B.; Fan, Q.H.. "Plasma Treated Active Carbon for Capacitive Deionization of Saline Water". Journal of Nanomaterials 2017 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85027145881&partnerID=MN8TOARS.
    10.1155/2017/1934724
  33. Alberto, N.; Kalinowski, H.J.; Neto, V.; Nogueira, R.. "Diamond-coated fiber Bragg grating through the hot filament chemical vapor process for chemical durability improvement". Applied Optics 56 6 (2017): 1603-1609. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013664197&partnerID=MN8TOARS.
    10.1364/AO.56.001603
  34. De Marchi, L.; Neto, V.; Pretti, C.; Figueira, E.; Chiellini, F.; Morelli, A.; Soares, A.M.V.M.; Freitas, R.. "The impacts of seawater acidification on: Ruditapes philippinarum sensitivity to carbon nanoparticles". Environmental Science: Nano 4 8 (2017): 1692-1704. http://www.scopus.com/inward/record.url?eid=2-s2.0-85031492057&partnerID=MN8TOARS.
    10.1039/c7en00335h
  35. De Marchi, L.; Neto, V.; Pretti, C.; Figueira, E.; Brambilla, L.; Rodriguez-Douton, M.J.; Rossella, F.; et al. "Physiological and biochemical impacts of graphene oxide in polychaetes: The case of Diopatra neapolitana". Comparative Biochemistry and Physiology Part - C: Toxicology and Pharmacology 193 (2017): 50-60. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010929515&partnerID=MN8TOARS.
    10.1016/j.cbpc.2017.01.005
  36. Bdikin, I.; Sharma, D.K.; Otero-Irurueta, G.; Hortigüela, M.J.; Tyagi, P.K.; Neto, V.; Singh, M.K.. "Charge injection in large area multilayer graphene by ambient Kelvin probe force microscopy". Applied Materials Today 8 (2017): 18-25. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010899675&partnerID=MN8TOARS.
    10.1016/j.apmt.2016.11.005
  37. Alberto, N.; Fonseca, M.A.; Neto, V.; Nogueira, R.; Oliveira, M.; Moreira, R.. "Incorporation of fiber bragg sensors for shape memory polyurethanes characterization". Sensors (Switzerland) 17 11 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85034099042&partnerID=MN8TOARS.
    10.3390/s17112600
  38. Simões, R.; Neto, V.. "Graphene oxide nanocomposites for potential wearable solar cells - A review". Journal of Materials Research 31 12 (2016): 1633-1647. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973560652&partnerID=MN8TOARS.
    10.1557/jmr.2016.203
  39. Titus, E.; Gil, J.C.; Chaudhari, A.; Rangel, C.M.; Neto, V.; Singh, A.K.. "Preface to the special issue on “1st International Conference on Hydrogen Energy, 20–22 July 2015, Aveiro, Portugal”". International Journal of Hydrogen Energy 41 27 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-85044310895&partnerID=MN8TOARS.
    10.1016/j.ijhydene.2016.06.002
  40. Titus, E.; Neto, V.; Gil, J.C.. "Advanced nanomaterials for hydrogen energy". International Journal of Hydrogen Energy 40 14 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84925340644&partnerID=MN8TOARS.
    10.1016/j.ijhydene.2015.03.050
  41. Zhou, L.Q.; Fan, Q.H.; Simões, R.; Neto, V.. "High-rate sputtering deposition of high- and low-refractive index films from conductive composites". MRS Communications 5 2 (2015): 327-332. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946477654&partnerID=MN8TOARS.
    10.1557/mrc.2015.32
  42. Zeng, A.; Neto, V.F.; Gracio, J.J.; Fan, Q.H.. "Diamond-like carbon (DLC) films as electrochemical electrodes". Diamond and Related Materials 43 (2014): 12-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893158757&partnerID=MN8TOARS.
    10.1016/j.diamond.2014.01.003
  43. Alberto, N.J.; Simões, R.; Nogueira, R.N.; Neto, V.F.. "Optimisation of tailored diamond coating conditions onto optical fibres through the Taguchi method". Diamond and Related Materials 43 (2014): 60-65. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894173763&partnerID=MN8TOARS.
    10.1016/j.diamond.2014.01.014
  44. Zhou, L.Q.; Dubey, M.; Simões, R.; Fan, Q.H.; Neto, V.. "Conductive ZnO:Zn Composites for High-Rate Sputtering Deposition of ZnO Thin Films". Journal of Electronic Materials 44 2 (2014): 682-687. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925484950&partnerID=MN8TOARS.
    10.1007/s11664-014-3529-z
  45. Neto, V.; Sousa, A.. "In focus on polymer behavior". Polymer International 62 11 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84885403972&partnerID=MN8TOARS.
    10.1002/pi.4624
  46. Grácio, J.; Titus, E.; Neto, V.; Marques, P.; Fagg, D.P.; Singh, M.K.; Coelho, M.; Mendes, J.. "Selected peer-reviewed articles from international conference on advanced nano materials (ANM 2010)". Journal of Nanoscience and Nanotechnology 12 8 (2012): 6599-6601. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865146926&partnerID=MN8TOARS.
    10.1166/jnn.2012.4530
  47. Lima, S.A.; Varum, H.; Sales, A.; Neto, V.F.. "Analysis of the mechanical properties of compressed earth block masonry using the sugarcane bagasse ash". Construction and Building Materials 35 (2012): 829-837. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861702552&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2012.04.127
  48. Santos, J.A.; Ranjbar, S.; Neto, V.F.; Ruch, D.; Grácio, J.. "Tuning the conditions for the deposition of nanocrystalline diamond by hot filament chemical vapour deposition". Journal of Nanoscience and Nanotechnology 12 8 (2012): 6822-6827. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865145843&partnerID=MN8TOARS.
    10.1166/jnn.2012.4555
  49. Estima, C.A.N.; Neto, V.F.; Oliveira, M.S.A.; Grácio, J.. "Nanocrystalline diamond coating on non-planar silicon substrates". Journal of Nanoscience and Nanotechnology 12 8 (2012): 6700-6706. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865146324&partnerID=MN8TOARS.
    10.1166/jnn.2012.4567
  50. Santos, J.A.; Neto, V.F.; Ruch, D.; Grácio, J.. "Nanocrystalline diamond coatings for mechanical seals applications". Journal of Nanoscience and Nanotechnology 12 8 (2012): 6835-6839. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865117889&partnerID=MN8TOARS.
    10.1166/jnn.2012.4568
  51. Neto, V.F.; Lencart, J.; Dias, A.G.; Santos, J.A.M.; Ramos, A.; Relvas, C.. "The effect of megavoltage radiation on polymeric materials to be used in biomedical devices". Journal of Nanoscience and Nanotechnology 12 8 (2012): 6779-6784. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865114189&partnerID=MN8TOARS.
    10.1166/jnn.2012.4549
  52. Santos, J.A.; Neto, V.F.; Ruch, D.; Grácio, J.. "The deposition of nanocrystalline diamond by HFCVD in different materials". Journal of Nano Research 18-19 (2012): 227-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864692451&partnerID=MN8TOARS.
    10.4028/www.scientific.net/JNanoR.18-19.227
  53. Santos, J.A.; Neto, V.F.; Cabral, G.; Ruch, D.; Grácio, J.. "Comparative study of nanocrystalline diamond deposition on WC-Ni and WC-Co substrates". Journal of Nanoscience and Nanotechnology 11 6 (2011): 5388-5393. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861141179&partnerID=MN8TOARS.
    10.1166/jnn.2011.3785
  54. Neto, V.F.; Santos, J.A.; Alberto, N.J.; Pinto, J.L.; Nogueira, R.N.; Grácio, J.. "Evaluation of diamond coatings on optical fibre sensors for biological use". Journal of Nanoscience and Nanotechnology 11 6 (2011): 5408-5412. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051750482&partnerID=MN8TOARS.
    10.1166/jnn.2011.3774
  55. Neto, V.F.; Vaz, R.; Oliveira, M.S.A.; Grácio, J.. "CVD diamond-coated steel inserts for thermoplastic mould tools-Characterization and preliminary performance evaluation". Journal of Materials Processing Technology 209 2 (2009): 1085-1091. http://www.scopus.com/inward/record.url?eid=2-s2.0-58149172200&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2008.03.012
  56. Neto, V.F.; Oliveira, M.S.A.; Ali, N.; Grácio, J.. "Erratum to "Time-modulated chemical vapour deposition diamonf on mould making 2738 steel" [Vacuum 82 (2008) 1346-1349] (DOI:10.1016/j.vacuum.2008.03.041)". Vacuum 83 6 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-58749094076&partnerID=MN8TOARS.
    10.1016/j.vacuum.2008.10.005
  57. Neto, V.F.; Vaz, R.; Ali, N.; Oliveira, M.S.A.; Grácio, J.. "Performance of sub-micron diamond films coated on mould inserts for plastic injection moulding". Journal of Materials Science 43 10 (2008): 3392-3399. http://www.scopus.com/inward/record.url?eid=2-s2.0-42149091294&partnerID=MN8TOARS.
    10.1007/s10853-007-2311-5
  58. Singh, M.K.; Titus, E.; Madaleno, J.C.; Pereira, L.; Cabral, G.; Neto, V.F.; Gracio, J.. "Nanocrystalline diamond on SiO2 fiber: A new class of hybrid material". Diamond and Related Materials 17 7-10 (2008): 1106-1109. http://www.scopus.com/inward/record.url?eid=2-s2.0-48849085329&partnerID=MN8TOARS.
    10.1016/j.diamond.2008.02.023
  59. Neto, V.F.; Vaz, R.; Ali, N.; Oliveira, M.S.A.; Grácio, J.. "Diamond coatings on 3D structured steel". Diamond and Related Materials 17 7-10 (2008): 1424-1428. http://www.scopus.com/inward/record.url?eid=2-s2.0-48849102072&partnerID=MN8TOARS.
    10.1016/j.diamond.2008.01.113
  60. Coelho, M.C.; Titus, E.; Cabral, G.; Neto, V.; Madaleno, J.C.; Fan, Q.H.; Sousa, A.C.M.; Grácio, J.. "Hydrogen adsorption onto nickel modified carbon nanotubes". Journal of Nanoscience and Nanotechnology 8 8 (2008): 4023-4028. http://www.scopus.com/inward/record.url?eid=2-s2.0-55849119921&partnerID=MN8TOARS.
    10.1166/jnn.2008.AN25
  61. Neto, V.F.; Oliveira, M.S.A.; Ali, N.; Grácio, J.. "Time-modulated chemical vapour deposition diamonf on mould making 2738 steel". Vacuum 82 12 (2008): 1346-1349. http://www.scopus.com/inward/record.url?eid=2-s2.0-49149102665&partnerID=MN8TOARS.
    10.1016/j.vacuum.2008.03.041
  62. Titus, E.; Cabral, G.; Madaleno, J.C.; Neto, V.F.; Shokuhfar, T.; Blau, W.J.; Ramesh Babu, P.; Misra, D.S.; Gracio, J.. "Synthesis of highly oriented carbon nanotube thin films by nickel functionalisation". Diamond and Related Materials 16 4-7 SPEC. (2007): 1195-1199. http://www.scopus.com/inward/record.url?eid=2-s2.0-34047269259&partnerID=MN8TOARS.
    10.1016/j.diamond.2006.11.033
  63. Ahmed, W.; Ahmed, E.; Maryan, C.; Jackson, M.J.; Ogwu, A.A.; Ali, N.; Neto, V.F.; Gracio, J.; Ahmsd, E.. "Time-modulated CVD process optimized using the Taguchi method". Journal of Materials Engineering and Performance 15 2 (2006): 236-241. http://www.scopus.com/inward/record.url?eid=2-s2.0-33645986975&partnerID=MN8TOARS.
    10.1361/105994906X95940
  64. Titus, E.; Ali, N.; Cabral, G.; Madaleno, J.C.; Neto, V.F.; Gracio, J.; Ramesh Babu, P.; et al. "Nitrogen and hydrogen related infrared absorption in CVD diamond films". Thin Solid Films 515 1 (2006): 201-206. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750026485&partnerID=MN8TOARS.
    10.1016/j.tsf.2005.12.062
  65. Neto, V.F.; Vaz, R.; Shokuhfar, T.; Ghumman, C.A.A.; Teodoro, O.M.N.D.; Ali, N.; Oliveira, M.S.A.; Grácio, J.. "Diffusion of critical elements in steel during thermal treatments in a diamond chemical vapour deposition atmosphere". Defect and Diffusion Forum 258-260 (2006): 270-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-33847314547&partnerID=MN8TOARS.
  66. Titus, E.; Misra, D.S.; Sikder, A.K.; Tyagi, P.K.; Singh, M.K.; Misra, A.; Ali, N.; et al. "Quantitative analysis of hydrogen in chemical vapor deposited diamond films". Diamond and Related Materials 14 3-7 (2005): 476-481. http://www.scopus.com/inward/record.url?eid=2-s2.0-21044448506&partnerID=MN8TOARS.
    10.1016/j.diamond.2004.12.001
  67. Gracio, J.J.; Barlat, F.; Rauch, E.F.; Jones, P.T.; Neto, V.F.; Lopes, A.B.. "Artificial aging and shear deformation behaviour of 6022 aluminium alloy". International Journal of Plasticity 20 3 (2004): 427-445. http://www.scopus.com/inward/record.url?eid=2-s2.0-0344464927&partnerID=MN8TOARS.
    10.1016/S0749-6419(03)00095-0
  68. Kousar, Y.; Ali, N.; Neto, V.F.; Mei, Sen; Gracio, J.. "Deposition of nanocrystalline diamond and titanium oxide coatings onto pyrolytic carbon using CVD and sol-gel techniques". Diamond and Related Materials 13 4-8 (2004): 638-642. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442451455&partnerID=MN8TOARS.
    10.1016/j.diamond.2004.01.034
  69. Ali, N.; Neto, V.F.; Mei, S.; Cabral, G.; Kousar, Y.; Titus, E.; Ogwu, A.A.; Misra, D.S.; Gracio, J.. "Optimisation of the new time-modulated CVD process using the Taguchi method". Thin Solid Films 469-470 SPEC. ISS. (2004): 154-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-10044266468&partnerID=MN8TOARS.
    10.1016/j.tsf.2004.08.074
  70. Ali, N.; Neto, V.F.; Gracio, J.. "Promoting secondary nucleation using methane modulations during diamond chemical vapor deposition to produce smoother, harder, and better quality films". Journal of Materials Research 18 2 (2003): 296-304. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038676250&partnerID=MN8TOARS.
    10.1557/JMR.2003.0041
  71. Ali, N.; Neto, V.F.; Kousar, Y.; Cabral, G.; Gracio, J.. "Nanocrystalline diamond films deposited using a new growth regime". Materials Science and Technology 19 7 (2003): 987-990. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042816327&partnerID=MN8TOARS.
    10.1179/026708303225004288
  72. Ali, N.; Kousar, Y.; Fan, Q.H.; Neto, V.F.; Gracio, J.. "Role of substrate temperature during diamond film growth using the newly developed time-modulated chemical vapor deposition process". Journal of Materials Science Letters 22 14 (2003): 1039-1042. http://www.scopus.com/inward/record.url?eid=2-s2.0-0041696626&partnerID=MN8TOARS.
    10.1023/A:1024705812865
  73. Ali, N.; Cabral, G.; Neto, V.F.; Sein, H.; Ahmed, W.; Gracio, J.. "Surface engineering of WC-Co used in dental tools technology". Materials Science and Technology 19 9 (2003): 1273-1278. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141995055&partnerID=MN8TOARS.
    10.1179/026708303225005962
Magazine article
  1. Neto, Victor. "Economia Circular? O que temos a ver com isso?", O Molde, 2020, https://issuu.com/cefamol/docs/o_molde_125/44.
  2. Neto, Victor. "Economia Circular", Diário de Aveiro – 1500 Maiores Empresas 2019, 2019
  3. Neto, Victor. "Está a nascer a Sociedade 5.0", Robótica, 2019, https://www.robotica.pt/2019/11/18/i5-0-revolucao-industrial-e-visao-artificial.
  4. Neto, Victor. "Produção Flexível na Indústria de Moldes", O Molde, 2019, https://issuu.com/cefamol/docs/molde_121-prova_final/34.
Thesis / Dissertation
  1. Vieira, João Pedro Cruz. "Otimização e flexibilização de um produto de gamificação". Master, 2018. http://hdl.handle.net/10773/27277.
  2. Silva, João Pedro Martins de Almeida e. "Redução dos custos em matéria-prima na célula de insuflação de uma fábrica de embalagens plásticas". Master, 2018. http://hdl.handle.net/10773/27276.
  3. Cadete, Mylene Simões. "Desenvolvimento de um novo produto à base de PET". Master, 2018. http://hdl.handle.net/10773/24210.
  4. Oliveira, Diana Raquel Pinho. "Aumento da produtividade de uma linha de enchimento de aerossóis". Master, 2018. http://hdl.handle.net/10773/23707.
  5. Silva, Katia Alexandra Martins Dias da. "Análise do envelhecimento acelerado de polímeros". Master, 2017. http://hdl.handle.net/10773/22078.
  6. Rodrigues, Cédric. "Inovação e desenvolvimento de equipamento de hotelatia". Master, 2017. http://hdl.handle.net/10773/23671.
  7. Carvalho, Helga Daniela Ferreira. "Desenvolvimento de linha de mobiliário de quarto de banho adaptável e sustentável: representar a flexibilidade e a tecnologia". Master, 2017. http://hdl.handle.net/10773/23674.
  8. Bessa, Henrique Carvalho. "Desenvolvimento de um produto para gamificação de formação em metodologias de trabalho Lean". Master, 2017. http://hdl.handle.net/10773/23575.
  9. Santos, Guillaume dos. "Análise do comportamento mecânico de componentes produzidos por fabrico por filamento fundido". Master, 2016. http://hdl.handle.net/10773/22716.
  10. Silva, André Filipe Branco Cardoso. "Tratamento de superfície com plasma de estruturas em material compósito para a indústria aeronáutica". Master, 2016. http://hdl.handle.net/10773/21215.
  11. Costa, Alfredo Nuno Mota Ribeiro da. "Nanocompósitos de matriz polimérica para impressão 3D". Master, 2016. http://hdl.handle.net/10773/16859.
  12. Martins, Bruno Miguel Teixeira. "Aplicação e ensaio de filmes finos de diamante em vedantes mecânicos". Master, 2016. http://hdl.handle.net/10773/22254.
  13. Schincariol, Simone. "Optimization of nanopaint with metallic touch for polymeric auto components". Master, 2016. http://hdl.handle.net/10773/16443.
  14. Ferreira, João Manuel Azevedo. "Modelação e simulação numérica de ferramenta moldante instrumentada com sensores de fibra ótica". Master, 2015. http://hdl.handle.net/10773/15399.
  15. Martins, Bruno Emanuel Mestre. "Revestimentos PVD em microcavidades para moldação por injeção". Master, 2014. http://hdl.handle.net/10773/13698.
  16. Lopes, Pedro José Ramos. "Aplicação de sensores FBG em modelos para injeção". Master, 2013. http://hdl.handle.net/10773/12548.
  17. Santos, Cátia Sofia Castanheira dos. "Análise do fluxo polimérico em micro cavidades revestidas com diamante". Master, 2013. http://hdl.handle.net/10773/12545.
  18. Kapusta, Gustavo Bonfim. "Estudo de revestimento em materiais para dispositivos biomecânicos". Master, 2013. http://hdl.handle.net/10773/11742.
  19. Neto, Victor Fernando Santos. "Authenticity of the leaders and reactions of the led". Master, 2012. http://hdl.handle.net/10773/10367.
  20. Reis, Alexandre Francisco Pereira dos. "Optimização do sistema MPCVD para deposição de filmes de diamante". Master, 2010. http://hdl.handle.net/10773/6810.
  21. Carvalho, Carlos Miguel Fernandes. "Revestimentos de diamante em fibras ópticas". Master, 2010. http://hdl.handle.net/10773/7518.
  22. Estima, Cátia Andreia das Neves. "Insertos para micro-moldação de termoplásticos por injecção". Master, 2010. http://hdl.handle.net/10773/7285.
  23. Silva, Francisco Manuel Pereira da. "Adaptação das ferramentas moldantes a sistemas de microinjecção". Master, 2009. http://hdl.handle.net/10773/2526.
  24. Neto, Victor Fernando Santos. "Carbon-based coatings for the modern plastics industry". PhD, 2008. http://hdl.handle.net/10773/2473.

Other

Software
  1. Gomes, Tiago; Cadete, Mylene; Jorge A. F. Ferreira; Renato Febra; João Silva; Tiago Noversa; Pontes, António J.; Neto, Victor. "OpenMMS-T4G". 2023.
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2019/11/01 - Current Enabling closed loop additive manufacturing through an on-demand feedstock material customization system, FCT grant SFRH/BD/143429/2019
Supervisor of Tiago Emanuel Pereira Gomes
 Mechanical Engineering Doctoral Program (PhD)
Universidade de Aveiro, Portugal
2021/02/15 - 2024/02/14 Desenvolvimento e sistematização de procedimentos de design para a circularidade, sustentabilidade e valorização
Supervisor
 Mechanical Engineering Doctoral Program (PhD)
Universidade de Aveiro, Portugal
2023/02/13 - 2023/12/13 Projeto do protótipo funcional para a recuperação de poliestireno expandido reciclado por extrusão / Project of a functional prototype for recovery of recycled expanded polystyrene via extrusion. http://hdl.handle.net/10773/40917
Supervisor of Pedro Alexandre Gonçalves Leite
 Mechanical Engineering Integrated Master (Master)
Universidade de Aveiro, Portugal
2020/11/01 - 2023/10/31 Development of predictive tools for polymer structural design to control morphing behavior in 4D printing
Supervisor of Mylene Simões Cadete
 Mechanical Engineering Doctoral Program (PhD)
Universidade de Aveiro, Portugal
2020/10/06 - 2023/10/05 Mechanical investigation and design optimization of thermoplastic-based nanocomposites produced by additive manufacturing
Supervisor of Yiyin Wu
 Mechanical Engineering Doctoral Program (PhD)
Universidade de Aveiro, Portugal
2019/01/01 - 2020/10/31 Controlo de qualidade e avaliação do ciclo de vida de ferramentas-molde, Research Scholarship in the scope of the project TOOLING4G - ADVANCED TOOLS FOR SMART MANUFACTURING
Supervisor of Mylene Simões Cadete
Universidade de Aveiro, Portugal
2015/02/24 - 2018/05/31 “Developing high efficient photovoltaic device with Cu2ZnSnS4 (CZTS) absorber”, FCT grant SFRH/BPD/90306/2012
Supervisor of Aiping Zeng
Universidade de Aveiro, Portugal
2015/03/01 - 2017/12/31 “Diamond films for thermal management of high-power”, Post-Doc researcher – FCT grant SFRH/BPD/81990/2011
Supervisor of Joana Catarina Mendes
 Post-doctoral Research (Other)
Universidade de Aveiro, Portugal
2012/01/01 - 2017/12/31 “Optical fiber devices coated with carbon allotrope”, FCT grant SFRH/BPD/78141/2011
Co-supervisor of Nélia Jordão Alberto
Universidade de Aveiro, Portugal
2015/01/01 - 2017/05/19 “Support procedure for the application of nanoengineering on the development of eco-efficient manufacturing processes”
Supervisor of Bárbara Filipa Casqueira Coelho Gabriel
 Mechanical Engineering Doctoral Program (PhD)
Universidade de Aveiro, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2018/06/27 - 2028/06/29 CISPEE 2018 - 3rd International Conference of the Portuguese Society for Engineering Education (2018/06/27 - 2018/06/29)
Conference (Co-organisor)
 Universidade de Aveiro, Portugal
2017/04/09 - 2017/04/12 Materiais 2017 - XVIII Congresso da Sociedade Portuguesa dos Materiais / VIII International Symposium on Materials (2017/04/09 - 2017/04/12)
Conference (Co-organisor)
 Universidade de Aveiro, Portugal

Conference scientific committee

Conference name Conference host
2021/09/29 - 2021/10/01 CNME 2020 - 12th Experimental Mechanics National Congress APAET & IPLeiria
2020/04/27 - 2020/04/30 EDUCON2020 - IEEE Global Engineering Education Conference IEEE

Journal scientific committee

Journal title (ISSN) Publisher
2017/01/01 - Current REM – International Engineering Journal Scielo