???global.info.a_carregar???
João Folgado is an Associate Professor at the Mechanical Engineering Department, Instituto Superior Técnico (IST), University of Lisbon. He is member of the executive committee of the Mechanical Engineering Department, of IST, and member of the scientific commission of the Master in Biomedical Engineering, of IST. He is member of IDMEC (scientific research institute) and assistant coordinator of the Mechanical Design Center (CPM) of IDMEC. His research fields interests include Computational Biomechanics, Tissue Biomechanics and Implant Design. The main focus is on the study of joint pathologies and the design of orthopedic prostheses. The goal of the work is to improve existing therapies. Other subjects of his research are medical imaging, tissue engineering and vascular implants. Structural optimization is another topic of his interest.
Read full resume ↓
Identification

Personal identification

Full name
João Orlando Marques Gameiro Folgado

Citation names

  • Folgado, João

Author identifiers

Ciência ID
9917-8D98-A8D7
ORCID iD
0000-0003-1160-7302
Researcher Id
L-4613-2013
Scopus Author Id
6603748292

Email addresses

  • jfolgado@tecnico.ulisboa.pt (Professional)

Telephones

Telephone
  • 218417341 (Professional)

Addresses

  • IDMEC, Instituto Superior Técnico. Av. Rovisco Pais, 1049-001, Lisboa, Lisboa, Portugal (Professional)

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Medical Engineering
Education
Degree Classification
2004
Concluded
 Engenharia Mecânica (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Aprovado por unanimidade
1995
Concluded
 Engenharia Mecânica (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Muito Bom
1992
Concluded
 Engenharia Mecânica (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
 15 valores
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2017/02/01 - Current Associate Professor (University Teacher) Universidade de Lisboa Instituto Superior Técnico, Portugal
2004/06/01 - 2017/02/01 Assistant Professor (University Teacher) Universidade de Lisboa Instituto Superior Técnico, Portugal
1996/02/01 - 2004/06/01 Assistant (University Teacher) Universidade de Lisboa Instituto Superior Técnico, Portugal

Positions / Appointments

Category
Host institution 		Employer
2019/06 - Current Membro da comissão científica do Mestrado Integrado em Engenharia Biomédica (MEBiom) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/10 - Current Coordenador do perfil de Biomecânica e Dispositivos Biomédicos do Mestrado em Engenharia Biomédica (MEBiom) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/10 - Current Coordenador adjunto do Centro de Projecto Mecânico (CPM), IDMEC Universidade de Lisboa Instituto Superior Técnico, Portugal
Instituto de Engenharia Mecânica, Portugal
2016/02 - 2021/01 Membro da comissão científica do Mestrado Integrado em Engenharia Mecânica (MEMec) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009/01 - 2017/01 Director adjunto do LEMAC/LTI (Laboratório Engenharia Mecânica Assistida por Computador / Laboratório de Tecnologias da Informação) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
Projects

Contract

Designation Funders
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Researcher
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/07/01 - 2019/12/31 Computational Modelling on Bone Tissue Regeneration: Towards the translation for clinical practice
PTDC/BBB-BMC/5655/2014
Researcher
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2015/06 - 2017/12 BoneSys – Bone biochemical and biomechanic integrated modeling: addressing remodeling, disease and therapy dynamics
LAETA - Projecto institucional 2015
Researcher
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Associated Laboratory for Energy Transports and Aeronautics
2015/06 - 2017/12 Caracterização, simulação e otimização de próteses e stents arteriais
LAETA - Projecto Institucional 2015
Researcher
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associated Laboratory for Energy Transports and Aeronautics
2012/01 - 2014/12 Biomecânica computacional e experimental – Análise e validação
LAETA - Projecto de colaboração nº 7
Principal investigator
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Associated Laboratory for Energy Transports and Aeronautics
2010/04 - 2013/09 Development of Scaffolds with Controlled Microstructure for Bone Tissue Engineering
Provided by PTCRIS: 104498
PTDC/EME-PME/104498/2008
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia, I.P.
Concluded
2010/04 - 2013/09 Software development for arthroplasty preparation
Provided by PTCRIS: 103408
PTDC/SAU-BEB/103408/2008
Researcher
Fundação para a Ciência e a Tecnologia, I.P.
Concluded
2009/04 - 2012/07 Cardiovascular Imaging Modeling and Simulation - SIMCARD
Provided by PTCRIS: 83905
UTAustin/CA/0047/2008
Researcher
Fundação para a Ciência e a Tecnologia, I.P.
2010 - 2012 Simulação numérica da regeneração óssea: modelos matemáticos de optimização
Acções Integradas Luso-Espanholas 2010, nº E-93-10
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
2007/05 - 2010/10 ORTHODONTIC MECHANICS TO CONTROL FORCE AND TOOTH MOVEMENT -DESIGN OF A NOVEL ORTHODONTIC APPLIANCE
Provided by PTCRIS: 65749
PTDC/EME-PME/65749/2006
Researcher
Fundação para a Ciência e a Tecnologia, I.P.
2007/05 - 2010/10 Computational Modelling of Bone Structure - Application to Bone Tissue Engineering
Provided by PTCRIS: 71436
PTDC/EME-PME/71436/2006
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia, I.P.
2005/06 - 2009/12 Laboratório de Biomecânica de Lisboa
REEQ/1064/EME/2005
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
2006/01 - 2008/12 Biomecânica Estrutural - Estudo de Implantes e Análise de Tecidos Moles
GRICES/CAPES-2006, Proc. 4.1.3/CAPES/CPLP
Researcher
Fundação para a Ciência e a Tecnologia
2002/03 - 2005/08 Modelos Computacionais e Experimentais para a Análise de Estabilidade da Prótese da Anca
POCTI/P/EME/38367/2001
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
1999/03 - 2003/06 Projecto óptimo de Implantes Ortopédicos
PRAXIS/P/EME/12002/1998
POCTI/EME/12002/1998
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Outputs

Publications

Book chapter
  1. Ângela Chan; João Gamelas; Folgado, João; Fernandes, Paulo R.. "Hastes Centradas e Offset". In Joelho Degenerativo - Da Artrose à Artroplastia, edited by João Gamelas, 370-384. Lidel, 2021.
    Published
  2. Patrícia Gamelas; Fernandes, Paulo R.; Folgado, João; João Gamelas. "Tribologia". In Joelho Degenerativo - Da Artrose à Artroplastia, edited by João Gamelas, 237-247. Lidel, 2021.
    Published
  3. Gorriz, C.; Ribeiro, F.; Guedes, J.M.; Folgado, J.; Fernandes, P.R.. "A biomechanical approach for bone regeneration inside scaffolds embedded with BMP-2". In New Developments in Tissue Engineering and Regeneration, 67-86. Springer International Publishing, 2019.
    10.1007/978-3-030-15372-4_5
  4. Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.. "On the Equivalence Between Forward and Inverse Dynamic Analysis of Human Motion Tasks". In New Trends in Mechanism and Machine Science, 479-486. Springer International Publishing, 2015.
    10.1007/978-3-319-09411-3_51
  5. AmbrÓsio, J.; Quental, C.; Folgado, J.; Monteiro, J.. "Dynamics of the upper limb with a detailed model for the shoulder". In Latest Advances in Robot Kinematics. Springer, 2012.
    10.1007/978-94-007-4620-6_52
  6. Fernandes, Paulo R.; Ruben, Rui B.; Folgado, Joao. "Bone Implant Design Using Optimization Methods". In Biomechanics of Hard Tissues, 267-296. Wiley-VCH Verlag GmbH & Co. KGaA, 2010.
    10.1002/9783527632732.ch10
  7. Fernandes, Paulo R.; Folgado, João. "A computational model to analyse the bone behaviour after a Total Hip Arthroplasty". In Computational Modeling of Tissue Surgery, 101-130. WIT Press, 2005.
Conference paper
  1. Antunes, Madalena; Quental, Carlos; Folgado, João; De Campos Azevedo C; ÂNGELO, Ana Catarina. "Shoulder positioning during superior capsular reconstruction: a computational analysis". Paper presented in 27th Congress of the European Society of Biomechanics (ESB2022), Porto, 2022.
  2. Marta, Gonçalo; Folgado, João; Quental, Carlos; Guerra-Pinto, Francisco. "Ground reaction force prediction during running using a full-body multibody model". Paper presented in 27th Congress of the European Society of Biomechanics (ESB2022), 2022.
  3. Rita Martins; Quental, Carlos; Folgado, João; ÂNGELO, Ana Catarina; De Campos Azevedo C. "Graft positioning during the latarjet procedure: computational analysis of shoulder stability and contact". Paper presented in 27th Congress of the European Society of Biomechanics (ESB2022), Porto, 2022.
  4. Marta, Gonçalo; Folgado, João; Quental, Carlos; Guerra-Pinto, Francisco. "Prediction of ground reaction forces during running". Paper presented in IX International Conference on Computational Bioengineering (ICCB2022), Lisboa, 2022.
  5. Antunes, Madalena; Quental, Carlos; Folgado, João; De Campos Azevedo C; ÂNGELO, Ana Catarina. "Graft positioning in superior capsular reconstruction: computational analysis of graft integrity and shoulder stability". Paper presented in IX International Conference on Computational Bioengineering (ICCB2022), Lisboa, 2022.
    Published
  6. AZEVEDO, CLARA; ÂNGELO, Ana Catarina; Quental, Carlos; Gonçalves, Sérgio B.; Folgado, João; Nuno Ferreira; Sevivas, Nuno. "Proximal And Mid-Thigh Fascia Lata Graft Constructs Used For Arthroscopic Superior Capsular Reconstruction Show Equivalent Biomechanical Properties. An In Vitro Human Cadaver Study". Paper presented in International Society of Arthroscopy, Knee Surgery and Orthopaedic Sports Medicine (ISAKOS) Congress 2021, 2021.
    Published
  7. Antunes, Madalena; Quental, Carlos; Folgado, João; AZEVEDO, CLARA; ÂNGELO, Ana Catarina. "What is the ideal position of the shoulder for graft fixation in arthroscopic superior capsular reconstruction? A computational analysis". Paper presented in International Society of Arthroscopy, Knee Surgery and Orthopaedic Sports Medicine (ISAKOS) Congress 2021, 2021.
    Published
  8. Comenda, Manuel; Quental, Carlos; Folgado, João; Sarmento, Marco; Monteiro, Jacinto. "Bone adaptation of the humerus after stemless shoulder arthroplasties". Paper presented in The 5th ECCOMAS Young Investigators Conference (YIC2019), Vienna, 2019.
    Published
  9. Comenda, Manuel; Quental, Carlos; Folgado, João; Sarmento, Marco; Monteiro, Jacinto. "Influence of stemless implants on the bone adaptation of the humerus". Paper presented in 25th Congress of the European Society of Biomechanics (ESB 2019), Vienna, 2019.
    Published
  10. Marta, Gonçalo; Folgado, João; Guerra-Pinto, Francisco; Quental, Carlos. "Contact pattern changes at the ankle after ligamentous injuries". Paper presented in Congresso de Métodos Numéricos em Engenharia (CMN 2019), Guimarães, 2019.
    Published
  11. Quental, Carlos; Margarida Azevedo; Ambrosio, Jorge; Gonçalves, Sérgio B.; Folgado, João. "Inverse dynamics optimization including muscle dynamics – influence on the muscle force sharing problem of the shoulder". Paper presented in 6th International Conference on Engineering Optimization (EngOpt 2018), Lisboa, 2018.
    Published
  12. Beatriz Santos; Quental, Carlos; Folgado, João; Sarmento, Marco; Monteiro, Jacinto. "Bone adaptation of the humerus after resurfacing and stemless shoulder arthroplasties". Paper presented in 8th World Congress of Biomechanics (WCB 2018), Dublin, 2018.
    Published
  13. Ferreira de Almeida, Diogo; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.; Benedict Verhegghe; Matthieu De Beule. "From CT-scan to finite element analysis for a patient specific hip arthroplasty". Paper presented in 8th World Congress of Biomechanics (WCB 2018), Dublin, 2018.
    Published
  14. Quental, Carlos; Margarida Azevedo; Ambrosio, Jorge; Gonçalves, Sérgio B.; Folgado, João. "Analysis of the musculotendon dynamics influence on the shoulder muscle force sharing problem using a fully inverse dynamics approach". Paper presented in The Fifth Joint International Conference on Multibody System Dynamics (IMSD 2018), Lisboa, 2018.
    Published
  15. Las Casas, E.B.; Leopoldo Paolucci; Rafael Faleiros; Sergio Costa Jr.; Fernandes, Paulo R.; Folgado, João; Luciano Rodrigues; Luciana Gomides. "Designing intramedullar posts for veterinary applications". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Published
  16. Quental, Carlos; Margarida Azevedo; Ambrosio, Jorge; Gonçalves, Sérgio B.; Folgado, João. "A fully inverse dynamics approach to study how the muscle dynamics influences the shoulder muscle force sharing problem". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Published
  17. Rita Ribeiro; Ângela Chan; Folgado, João; Fernandes, Paulo R.; João Gamelas. "Bone remodelling analysis of the tibia after a total knee arthroplasty". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Published
  18. Diogo F. Almeida; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.; Benedict Verhegghe; Matthieu De Beule. "Hexahedral Finite Element Mesh Generation for Total Hip Arthroplasty". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Published
  19. Beatriz Santos; Quental, Carlos; Folgado, João; Sarmento, Marco; Monteiro, Jacinto. "Bone adaptation process of the humerus to resurfacing and stemless implants: a computational analysis". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2018), Lisbon, 2018.
    Published
  20. Ribeiro, Nelson S.; Folgado, João; Rodrigues, Helder. "Surrogate-based visualization of the influence of geometric design on the performance of a coronary stent". Paper presented in Data Science, Statistics & Visualisation (DSSV 2017), Lisbon, 2017.
    Published
  21. Joana Capacete; Folgado, João; Fernandes, Paulo R.; Vinga, Susana. "Bone remodeling under disease conditions and therapy: a biomechanochemical approach". Paper presented in 23rd Congress of the European Society of Biomechanics (ESB 2017), Sevilha, 2017.
    Published
  22. João Batista; Quental, Carlos; Folgado, João; Monteiro, Jacinto; Sarmento, Marco. "Scapular notching relevance in the reverse shoulder arthroplasty: a finite element analysis". Paper presented in 23rd Congress of the European Society of Biomechanics (ESB 2017), Sevilha, 2017.
    Published
  23. Castilho, Miguel; Folgado, João; Jorge Rodrigues; Fernandes, Paulo R.. "Design and Fabrication of a site specific bioresorbable cage for tibial tuberosity advancement in dogs". Paper presented in 14th International Symposium Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2016), Tel Aviv, 2016.
    Published
  24. Diogo Almeida; Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; João Gamelas; Benedict Verhegghe; Matthieu De Beule. "Automated femoral landmark extraction for implant placement in hip arthroplasty". Paper presented in 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, 2016.
    Published
  25. Quental, Carlos; Folgado, João; Monteiro, Jacinto; Sarmento, Marco. "Computational analysis of full-thickness tears of the supraspinatus tendon". Paper presented in 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, 2016.
    Published
  26. Frederico Ribeiro; Folgado, João; Gómez-Benito, M.J.; García-Aznar, J.M.; Fernandes, Paulo R.. "Healing patterns in long bones oblique fractures". Paper presented in 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, 2016.
    Published
  27. Joana Capacete; Folgado, João; Fernandes, Paulo R.; Rui Coelho; Vinga, Susana; Natal Jorge, Renato; Belinha, Jorge. "A biomechanochemical bone remodeling model for disease and therapy dynamics". Paper presented in Mechanical Engineering Conference (CEM 2016), Porto, 2016.
    Published
  28. Pedro Martins; Natal Jorge, Renato; L. Sousa; C. Castro; José Chaves Pereira; Folgado, João; Fernandes, Paulo R.; Jose Carlos Pereira. "An experimental protocol to investigate arterial mechanics". Paper presented in Mechanical Engineering Conference (CEM 2016), Porto, 2016.
    Published
  29. Ribeiro, F.O.; Fernandes, P.R.; Folgado, J.; Gómez-Benito, M.J.; García-Aznar, J.M.. "The callus formation in bone healing as a shape optimization problem". 2014.
    10.1201/b17488-169
  30. Rodrigues, G.P.; Guedes, J.M.; Folgado, J.O.. "Combined topology and stacking sequence optimization of composite laminated structures for structural performance measures". 2014.
    10.1201/b17488-176
  31. Ribeiro, N.S.; Folgado, J.O.; Rodrigues, H.C.. "Parametric optimization of coronary stents based on finite element models". 2014.
    10.1201/b17488-171
  32. Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.. "Optimal approach to the human motion reconstruction within the limitation of the kinematic data acquisition procedures". 2014.
    10.1201/b17488-168
  33. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "3D shape prior active contours for an automatic segmentation of a patient specific femur from a CT scan". 2014.
    10.1201/b15810-48
  34. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "Histogram based threshold segmentation of the human femur body for patient specific acquired CT scan images". 2012.
    10.1201/b12753-52
  35. Almeida, D.; Folgado, J.; Fernandes, P.R.; Ruben, R.B.. "Development of an automated procedure for a patient specific segmentation of the human femur body from CT scan images". 2012.
    http://dx.doi.org/10.1201/b11570-71
  36. Lina Espinha; Paula C. Fernandes; Fernandes, Paulo R.; Folgado, João. "Computational Analysis of Stress and Bone Remodeling During an Anterior Cervical Fusion". Paper presented in 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2010), Valência, 2010.
    Published
  37. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. "Optimum Design of Cementless Hip Prostheses Considering Stem Alignment Effect on Long-Term Performance". Paper presented in IV European Conference on Computational Mechanics (ECCM 2010), Paris, 2010.
    Published
  38. Paula C. Fernandes; Lina Espinha; Fernandes, Paulo R.; Folgado, João. "Anterior Cervical Fusion: Mechanical Stress and Bone Remodeling Analysis". Paper presented in 17th Congress of the European Society of Biomechanics (ESB 2010), Edimburgo, 2010.
    Published
  39. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "The Effect of Varus and Valgus Alignment on Hip Stem Long-Term Performance". Paper presented in 17th Congress of the European Society of Biomechanics (ESB 2010), Edimburgo, 2010.
    Published
  40. Quental, Carlos; Folgado, João; Ambrosio, Jorge. "3D Musculoskeletal Model of the Upper Limb". Paper presented in 17th Congress of the European Society of Biomechanics (ESB 2010), Edimburgo, 2010.
    Published
  41. Monteiro, Nuno Barroso; Folgado, João; Silva, Miguel Tavares da; João Levy Melancia. "Influence of the Intersomatic Fusion on the Adjacent Levels, using a Co-Simulation between the Multibody System Dynamics and the Finite Element Method". Paper presented in 17th Congress of the European Society of Biomechanics (ESB 2010), Edinburgh, Edimburgo, 2010.
    Published
  42. Ângela Chan; Fernandes, Paulo R.; Folgado, João; João Gamelas. "Biomechanical analysis of the tibial tray design in TKA: comparison between modular and offset tibial trays". Paper presented in 17th Congress of the European Society of Biomechanics (ESB 2010), Edimburgo, 2010.
    Published
  43. Luciano Rodrigues; Daniel S. Lopes; Folgado, João; Fernandes, Paulo R.; Pires, E.B.; Las Casas, E.B.; Faleiros, R.R.. "Computational analysis of an intramedullary interlocking nail implant for veterinary applications". Paper presented in 6th World Congress on Biomechanics (WCB2010), Edimburgo, 2010.
    Published
  44. Quental, Carlos; Folgado, João; Ambrosio, Jorge. "Inverse dynamic analysis of the upper limb". Paper presented in 2nd International Conference on Engineering Optimization (EngOpt2010), Lisbon, 2010.
    Published
  45. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João. "Shape Optimization of Cemented Hip Implants". Paper presented in 2nd International Conference on Engineering Optimization (EngOpt2010), Lisbon, 2010.
    Published
  46. Folgado, João; Fernandes, Paulo R.; Rodrigues, Helder. "Topology optimization of structures subjected to contact conditions". Paper presented in 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisboa, 2009.
    Published
  47. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimum Design of Uncemented Hip Implants". Paper presented in 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisbon, 2009.
    Published
  48. Sara Barreto; Folgado, João; Fernandes, Paulo R.; Monteiro, Jacinto. "Influência do osso pélvico nos resultados computacionais para o componente acetabular de uma prótese total da anca". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, 2009.
    Published
  49. Folgado, João; Quental, Carlos; Ribeiro, Nelson S.. "Modelação computacional da artroplastia do ombro: análise da remodelação óssea e desgaste articular". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, 2009.
    Published
  50. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimização Geométrica da Prótese da Anca para Maximizar a Estabilidade Inicial e o Desempenho a Longo Prazo". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, 2009.
    Published
  51. Monteiro, Nuno Barroso; Silva, Miguel Tavares da; Folgado, João; João L. Melancia. "Dynamic Stress Distribution on a Multilevel Cervical/Lumbar Fusion using a MSD/FE Co-Simulation Approach". Paper presented in Multibody Dynamics 2009, Warsaw, 2009.
    Published
  52. Paula C. Fernandes; Folgado, João; Fernandes, Paulo R.. "Computational Analyses of Medical Devices for the Cervical Spinal Fusion". Paper presented in 3rd International Conference on Integrity, Reliability & Failure (IRF’2009), Porto, 2009.
    Published
  53. Ribeiro, Nelson S.; Paula C. Fernandes; Daniel S. Lopes; Folgado, João; Fernandes, Paulo R.. "3-D Solid and Finite Element Modeling of Biomechanical Structures - A Software Pipeline". Paper presented in 7th EUROMECH Solid Mechanics Conference (ESMC2009), Lisbon, 2009.
    Published
  54. Monteiro, Nuno Barroso; Silva, Miguel Tavares da; Folgado, João; João L. Melancia. "A New Approach to Analyze the Stress Distribution on a Multilevel Cervical/Lumbar Intersomatic Fusion". Paper presented in 7th EUROMECH Solid Mechanics Conference (ESMC2009), Lisbon, 2009.
    Published
  55. Quental, Carlos; Ribeiro, Nelson S.; Folgado, João; Fernandes, Paulo R.; Monteiro, Jacinto. "Computational analysis of shoulder arthroplasty: bone remodelling and joint wear". Paper presented in IV International Conference on Computational Bioengineering (ICCB2009), Bertinolo (Forlì), 2009.
    Published
  56. Barreto, S.; Folgado, J.; Monteiro, J.; Fernandes, P.R.. "The influence of the pelvic bone on the acetabular component analysis". 2008.
    10.4203/ccp.89.59
  57. Luciano Rodriges; Daniel S. Lopes; Folgado, João; Fernandes, Paulo R.; Las Casas, E.B.; Pires, E.B.; Martins, J.A.C.. "Bone Remodeling Analysis of a Bovine Femur for a Veterinary Implant Design". Paper presented in 8th Computer Methods in Biomechanics and Biomedical Engineering Symposium (CMBBE2008), Porto, 2008.
    Published
  58. Luciano Rodrigues; Daniel S. Lopes; Folgado, João; Fernandes, Paulo R.; Pires, E.B.; Martins, J.A.C.; Las Casas, E.B.; Faleiros, R.R.. "Bovine Bone Remodeling Analysis for Veterinary Applications". Paper presented in 8th World Congress on Computational Mechanics (WCCM8), 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, 2008.
    Published
  59. Monteiro, Nuno Barroso; Folgado, João; Silva, Miguel Tavares da; João L. Melancia. "Analysis of the Intervertebral Discs Using a Finite Element and Multibody Dynamics Approach". Paper presented in 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, 2008.
    Published
  60. Folgado, João; Fernandes, Paulo R.; Rodrigues, Helder. "Topology Optimization of Three Dimensional Structures With Contact Conditions". Paper presented in 8th World Congress on Computational Mechanics (WCCM8), 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, 2008.
    Published
  61. Luciano Rodrigues; Las Casas, E.B.; Faleiros, R.R.; Daniel S. Lopes; Pires, E.B.; Martins, J.A.C.; Folgado, João; Fernandes, Paulo R.. "Utilização de materiais poliméricos na confecção de uma haste intramedular bloqueada para uso em medicina veterinária". Paper presented in XXIX CILAMCE - Congresso Ibero Latino Americano de Métodos Computacionais em Engenharia (CILAMCE 2008), 2008.
    Published
  62. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Análise de próteses não cimentadas: Estabilidade inicial e remodelação óssea". Paper presented in Métodos Numéricos e Computacionais em Engenharia- CMNE/CILAMCE2007, Porto, 2007.
    Published
  63. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Hip prosthesis design for optimal stability and a minimum of bone remodeling". Paper presented in ICCB2007 - III International Congress on Computational Bioengineering, Isla Margarita, 2007.
  64. Folgado, João; Rui P. Andrade; Fernandes, Paulo R.. "Computational study on stability and bone remodeling for a hip replacement using a “minimal invasive” femoral stem". Paper presented in III European Conference on Computational Mechanics – Solids, Structures and Coupled Problems in Engineering (ECCM2006), Lisboa, 2006.
    Published
  65. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Rodrigues, Helder. "Hip Prosthesis Design Using a Multi-Criteria Formulation". Paper presented in III European Conference on Computational Mechanics – Solids, Structures and Coupled Problems in Engineering (ECCM2006), 2006.
    Published
  66. Rogério Rodrigues; Fernandes, Paulo R.; Folgado, João; Jose A. Simões. "Numerical and Experimental Analysis of the Hip Stem Migration". Paper presented in 5th International Conference on Mechanics and Materials in Design (M2D2006), 2006.
  67. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "A Three-Dimensional Model for Shape Optimization of Hip Prostheses Using a Multi-Criteria Formulation". Paper presented in Sixth World Congress on Structural and Multidisciplinary Optimization (WCSMO-6), Rio Janeiro, 2005.
    Published
  68. Jorge Fialho; Folgado, João; Fernandes, Paulo R.. "Computational Simulation of an Artificial Hip Joint". Paper presented in 15th Annual Meeting of the European Orthopaedic Research Society, Lisboa, 2005.
    Published
  69. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "Optimização Multi-objectivo da Geometria de Próteses da Articulação da Anca". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2005, Granada, 2005.
    Published
  70. Folgado, João; Fernandes, Paulo R.; Rodrigues, Helder. "Modelo Material para Optimização de Topologia de Estruturas com Condições de Contacto". Paper presented in Congreso de Métodos Numéricos en Ingeniería 2005, Granada, 2005.
    Published
  71. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Rodrigues, Helder. "A 3D Multi-criteria optimization model for hip prosthesis design". Paper presented in ICCB2005 - II International Conference on Computational Bioengineering, Lisboa, 2005.
    Published
  72. Fernandes, Paulo R.; Jorge Fialho; Folgado, João; Luis Eça. "Computational Modelling of Wear and Heat Generation on a Hip Joint". Paper presented in ICCB2005 - II International Conference on Computational Bioengineering, Lisboa, 2005.
    Published
  73. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "A 3D Model for Uncemented Hip Prosthesis Design". Paper presented in 2nd International Conference on Advance Research in Virtual and Rapid Prototyping (VRAP2005), Leiria, 2005.
  74. Ruben, R.; Folgado, João; Fernandes, P.R.. "Optimização Multi-Objectivo da Geometria de Próteses da Anca". Paper presented in Congresso de Métodos Computacionais em Engenharia, Lisboa, 2004.
  75. Folgado, João; Fernandes, P.R.; Rodrigues, H.. "Optimização de Topologia com Condições de Contacto". Paper presented in Congresso de Métodos Computacionais em Engenharia, Lisboa, 2004.
  76. Folgado, João; Fernandes, P.R.; Guedes. J.M.; Rodrigues, H.. "Evaluation of Bone Quality by a Computational Model for Bone Remodeling". Paper presented in 14th Conference of the European Society of Biomechanics, Hertogenbosh, 2004.
  77. Folgado, João; Fernandes, P.R.; Rodrigues, H.. "A material model for topology optimisation structures with contact conditions". Paper presented in The Seventh International Conference on Computational Structures Technology, Lisboa, 2004.
  78. Ruben, R.B.; Fernandes, P.R.; Folgado, João. "A Multicriteria Shape Optimization Model for Hip Prosthesis Design". Paper presented in Fifth World Congress on Structural and Multidisciplinary Optimization (WCSMO-5), Veneza, 2003.
  79. Rodrigues, H.C.; Folgado, João; Fernandes, P.R.. "A Topology Optimization Model to Simulate Bone Remodelling Around Hip Prostheses". Paper presented in Seventh U.S. National Congress on Computational Mechanics, Albuquerque, 2003.
  80. Ruben, R.B.; Folgado, João; Fernandes, P.R.. "Design of Hip Stems for Optimal Displacement and Stress Distribution on Bone/Stem Interface". Paper presented in International Congress on Computational Bioengineering, Zaragoza, 2003.
  81. Fernandes, P.R.; Folgado, João; Jacobs, C.; Pellegrini, V.; Rodrigues, H.. "Numerical Analysis on Bone Remodeling and Bone Ingrowth in Cementless Total Hip Arthroplasty". Paper presented in International Congress on Computational Bioengineering, Zaragoza, 2003.
  82. Fernandes, Paulo R.; Folgado, João; Jacobs, C.; Pellegrini, V.. "How the stem shape can influence the bone ingrowth and the stability of a hip prosthesis". Paper presented in 13th Conference of the European Society of Biomechanics, Wroclaw, Wroclaw, 2002.
  83. Folgado, João; Fernandes, P.R.; Rodrigues, H.; Guedes, J.M.. "Modelo Computacional para a Análise do Intracrescimento Ósseo em Prótese da Articulação da Anca". Paper presented in V Congreso de Métodos Numéricos en Ingenieria, Madrid, 2002.
  84. Fernandes, P.R.; Folgado, João; Ruben, R.B.. "Computational Models to Study the Relation of Stem Shape with the Mechanical Stability of a Cementless Hip Prosthesis". Paper presented in Advanced School and Workshop on Bone Mechanics – Mathematical and Mechanical Models for Analysis and Synthesis, Lisboa, 2002.
  85. Folgado, João; Fernandes, P.R.; Rodrigues, H.. "Topology Optimization of Three-Dimensional Structures under Contact Conditions". Paper presented in Fourth World Congress on Structural and Multidisciplinary Optimization (WCSMO-4), Dalian, 2001.
  86. Folgado, João; Fernandes, P.R.; Jacobs, C.R.; Pellegrini, V.. "A contact model with ingrowth control for bone remodelling around cementless stems". Paper presented in 12th conference of the European Society of Biomechanics, Dublin, 2000.
  87. Fernandes, Paulo R.; Folgado, João; Jacobs, C.; Pellegrini, V.. "A Contact Model for Bone Remodeling on Total Hip Arthroplasty". Paper presented in Fourth International Symposium on Computer Methods in Biomechanics & Biomedical Engineering, Lisbon, 1999.
  88. Folgado, João; Guedes, J.M.; Rodrigues, H.. "Plate reinforcement design for a buckling load criterion". Paper presented in 5ª Pan-American Congress in Applied Mechanics (PACAM V), S. Juan, 1997.
  89. Folgado, João; Rodrigues, H.. "Topology Optimization Methods Applied to the Design of Orthopaedic Implants". Paper presented in Second World Congress of Structural and Multidisciplinary Optimization (WCSMO-2), 1997.
  90. Folgado, João; Rodrigues, H.. "Layout Design of Plate Reinforcements with a Buckling Load Criterion". Paper presented in Frist World Congress of Structural and Multidisciplinary Optimization (WCSMO-1), Goslar, 1995.
Edited book
  1. Fernandes, Paulo R.; Folgado, João; Quental, Carlos; Castro, André. ICCB2022, IX International Conference on Computational Bioengineering – Digital Proceedings. Portugal. 2022.
    Published • Editor
  2. Rodrigues, H.C.; Herskovits, J.; Mota Soares, C.M.; Araújo, A.L.; Guedes, J.M.; Folgado, João; Moleiro, F.; Madeira, J.F.A.. EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization. Springer International Publishing. 2019.
    10.1007/978-3-319-97773-7
  3. Fernandes, Paulo R.; Tavares, João Manuel R.S.; Folgado, João; Quental, Carlos; Ruben, Rui. CMBBE2018, 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization. 2018.
    Editor
  4. Flores, P.; Marques, F.; Silva, F.; Teixeira, J.C.; Alves, J.L.; Claro, J.P.; Dourado, N.; Cortez, S.; Folgado, João. Actas do 7º Congresso Nacional de Biomecânica / Proceedings of the 7th Portuguese Congress on Biomechanics. 2017.
  5. Araújo, A.L.; Correia, J.R.; Mota Soares, C.M.; Duarte, F.M.; Folgado, João; Franco Correia, V.M.; Loja, M.A.R.; Madeira, J.F.A.; Santos, J.V.A.. ICCST/10, 10th International Conference on Composite Science and Technology – Book of Abstracts. 2015.
  6. Fernandes, Paulo R.; Bártolo, Paulo; Folgado, João; Ruben, Rui B.; Almeida, Henrique. ICTE 2015, IV International Conference on Tissue Engineering – Book of Abstracts. 2015.
  7. Ruben, Rui B.; Vieira, Milena; Campos, Carlos; Almeida, Henrique A.; Siopa, Jorge; Bártolo, Paulo; Folgado, João. Actas do 6º Congresso Nacional de Biomecânica / Proceedings of the 6th Portuguese Congress on Biomechanics. 2015.
  8. Rodrigues, H.; Herskovits, J.; Mota Soares, C.; Guedes, J.M.; Araújo, A.; Folgado, João; Moleiro, F.; Madeira, J.A.. Engineering Optimization IV, Proceedings of the International Conference on Engineering Optimization (EngOpt2014). CRC Press. 2015.
  9. Rodrigues, H.; Herskovits, J.; Mota Soares, C.; Guedes, J.M.; Araújo, A.L.; Folgado, João; Moleiro, F.; Madeira, J.F.A.. EngOpt2014, 4th International Conference on Engineering Optimization – Book of Abstracts. 2014.
  10. Fernandes, P.R.; Bártolo, P.J.; Folgado, João; Rodrigues, H.C.; Ruben, R.B.; Almeida, H.; Dias, M.R.. ICTE2011, II International Conference on Tissue Engineering: An ECCOMAS Thematic Conference. Portugal: IST Press. 2011.
  11. Rodrigues, H.; Herskovits, J.; Mota Soares, C.; Guedes, J.M.; Folgado, João; Araújo, A.; Moleiro, F.; et al. EngOpt2010, 2nd International Conference on Engineering Optimization – Book of Abstracts and CD-ROM Proceedings. APMTAC. 2010.
  12. Bártolo, P.J.; Fernandes, P.R; Ruben, R.B.; Folgado, João; Almeida, H.; Alves, N.; Mendes, A.. ICTE2009, International Conference on Tissue Engineering: An ECCOMAS Thematic Conference. IST Press. 2009.
  13. Rodrigues, H.C.; Guedes, J.M.; Fernandes, P.R.; Folgado, João. WCSMO-8, Eighth World Congress on Structural and Multidisciplinary Optimization – Book of Abstracts and CD-ROM Proceedings. APMTAC. 2009.
  14. Mota Soares, C.A.; Martins, J.A.C.; Rodrigues, H.C.; Ambrósio, J.A.C.; Pina, C.A.B.; Mota Soares, C.M.; Pereira, E.B.R.; Folgado, João. III European Conference on Computational Mechanics – Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Springer. 2006.
Journal article
  1. Francisco Rebelo de Andrade; Carlos Quental; João Folgado; Francisco Guerra-Pinto. "Damage-Based Assessment of the Risk of Cut-Out in Trochanteric Fractures for Different Proximal Femoral Nail Anti-Rotation (PFNA) Blade Positions". Applied Sciences (2023): https://doi.org/10.3390/app132111614.
    10.3390/app132111614
  2. Diniz, P.; Quental, C.; Violindo, P.; Veiga Gomes, J.; Pereira, H.; Kerkhoffs, G.M.M.J.; Ferreira, F.C.; Folgado, J.. "Design and validation of a finite element model of the aponeurotic and free Achilles tendon". Journal of Orthopaedic Research 41 3 (2023): 534-545. http://www.scopus.com/inward/record.url?eid=2-s2.0-85134559760&partnerID=MN8TOARS.
    10.1002/jor.25408
  3. Rita Martins; Carlos Quental; João Folgado; Ana Catarina Ângelo; Clara de Campos Azevedo. "Influence of Graft Positioning during the Latarjet Procedure on Shoulder Stability and Articular Contact Pressure: Computational Analysis of the Bone Block Effect". Biology (2022): https://doi.org/10.3390/biology11121783.
    10.3390/biology11121783
  4. Maia Dias, C.; Gonçalves, S.B.; Completo, A.; da Silva, M.R.; de Campos Azevedo, C.; Mineiro, J.; Ferreira, F.; Folgado, J.. "Mechanical consequences at the tendon-bone interface of different medial row knotless configurations and lateral row tension in a simulated rotator cuff repair". Journal of Experimental Orthopaedics 9 1 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85138240990&partnerID=MN8TOARS.
    10.1186/s40634-022-00536-1
  5. Marta, G.; Quental, C.; Folgado, J.; Guerra-Pinto, F.. "Multibody modelling of the foot for the biomechanical analysis of the ankle joint during running: A narrative review". Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 236 2 (2022): 338-353. http://www.scopus.com/inward/record.url?eid=2-s2.0-85127776295&partnerID=MN8TOARS.
    10.1177/14644193221090871
  6. Nogueira, P.; Folgado, J.; Quental, C.; Gamelas, J.. "Metaphyseal sleeves in revision total knee arthroplasties: Computational analysis of bone remodeling". Knee 37 (2022): 10-19. http://www.scopus.com/inward/record.url?eid=2-s2.0-85131395677&partnerID=MN8TOARS.
    10.1016/j.knee.2022.05.006
  7. Antunes, Madalena; Quental, Carlos; Folgado, João; AZEVEDO, CLARA; ÂNGELO, Ana Catarina. "Shoulder Positioning during Superior Capsular Reconstruction: Computational Analysis of Graft Integrity and Shoulder Stability". Biology 10 12 (2021): 1263. http://dx.doi.org/10.3390/biology10121263.
    Published • 10.3390/biology10121263
  8. Quental, Carlos; Vasconcelos, Sara; Folgado, João; Guerra-Pinto, Francisco. "Influence of the PFNA screw position on the risk of cut-out in an unstable intertrochanteric fracture: a computational analysis". Medical Engineering & Physics 97 (2021): 70-76. http://dx.doi.org/10.1016/j.medengphy.2021.10.001.
    Published • 10.1016/j.medengphy.2021.10.001
  9. AZEVEDO, CLARA; ÂNGELO, Ana Catarina; Quental, Carlos; Gonçalves, Sérgio; Folgado, João; Ferreira, Nuno; Sevivas, Nuno. "Proximal and mid-thigh fascia lata graft constructs used for arthroscopic superior capsule reconstruction show equivalent biomechanical properties: an in vitro human cadaver study". JSES International 5 3 (2021): 439-446. http://dx.doi.org/10.1016/j.jseint.2021.01.016.
    Published • 10.1016/j.jseint.2021.01.016
  10. Ribeiro, Nelson S.; Folgado, João; Rodrigues, Helder. "Surrogate-based multi-objective design optimization of a coronary stent: Altering geometry toward improved biomechanical performance". International Journal for Numerical Methods in Biomedical Engineering 37 6 (2021): http://dx.doi.org/10.1002/cnm.3453.
    Published • 10.1002/cnm.3453
  11. Maia Dias, Carlos; Gonçalves, Sérgio B.; Completo, António; Tognini, Martina; da Silva, Manuel Ribeiro; Mineiro, Jorge; Curate, Francisco; Ferreira, Frederico; Folgado, João. "Why are tapes better than wires in knotless rotator cuff repairs? An evaluation of force, pressure and contact area in a tendon bone unit mechanical model". Journal of Experimental Orthopaedics 8 1 (2021): http://dx.doi.org/10.1186/s40634-020-00321-y.
    Published • 10.1186/s40634-020-00321-y
  12. Marta, G; Quental, C; Folgado, J; Guerra-Pinto, F. "Contact patterns in the ankle joint after lateral ligamentous injury during internal rotation: A computational study". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 235 1 (2021): 82-88. http://dx.doi.org/10.1177/0954411920960256.
    Published • 10.1177/0954411920960256
  13. Quental, C.; Reis, J.; Folgado, J.; Monteiro, J.; Sarmento, M.. "Comparison of 3 supraspinatus tendon repair techniques - a 3D computational finite element analysis". Computer Methods in Biomechanics and Biomedical Engineering 23 16 (2020): 1387-1394. http://dx.doi.org/10.1080/10255842.2020.1805441.
    Published • 10.1080/10255842.2020.1805441
  14. Quental, C.; Folgado, J.; Comenda, M.; Monteiro, J.; Sarmento, M.; Quental, Carlos; Folgado, João; et al. "Primary stability analysis of stemless shoulder implants". Medical Engineering & Physics 81 (2020): 22-29. http://dx.doi.org/10.1016/j.medengphy.2020.04.009.
    Published • 10.1016/j.medengphy.2020.04.009
  15. Al-Tamimi, Abdulsalam Abdulaziz; Quental, Carlos; Folgado, Joao; Peach, Chris; Bartolo, Paulo; Al-Tamimi, A.A.; Quental, C.; et al. "Stress analysis in a bone fracture fixed with topology-optimised plates". Biomechanics and Modeling in Mechanobiology 19 2 (2020): 693-699. http://dx.doi.org/10.1007/s10237-019-01240-3.
    10.1007/s10237-019-01240-3
  16. Comenda, M.; Quental, C.; Folgado, J.; Sarmento, M.; Monteiro, J.. "Bone adaptation impact of stemless shoulder implants: a computational analysis". Journal of Shoulder and Elbow Surgery 28 10 (2019): 1886-1896. http://www.scopus.com/inward/record.url?eid=2-s2.0-85067654954&partnerID=MN8TOARS.
    10.1016/j.jse.2019.03.007
  17. Ribeiro, N.S.; Folgado, J.; Rodrigues, H.C.. "Surrogate-based visualization and sensitivity analysis of coronary stent performance: A study on the influence of geometric design". International Journal for Numerical Methods in Biomedical Engineering (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85050818275&partnerID=MN8TOARS.
    10.1002/cnm.3125
  18. Carlos, Q.; Margarida, A.; Jorge, A.; Goncalves, S.B.; Joaõ, F.. "Influence of the Musculotendon Dynamics on the Muscle Force-Sharing Problem of the Shoulder-A Fully Inverse Dynamics Approach". Journal of Biomechanical Engineering 140 7 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85046546499&partnerID=MN8TOARS.
    10.1115/1.4039675
  19. Santos, B.; Quental, C.; Folgado, J.; Sarmento, M.; Monteiro, J.. "Bone remodelling of the humerus after a resurfacing and a stemless shoulder arthroplasty". Clinical Biomechanics 59 (2018): 78-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052913425&partnerID=MN8TOARS.
    10.1016/j.clinbiomech.2018.09.009
  20. Ribeiro, F.O.; Gómez-Benito, M.J.; Folgado, J.; Fernandes, P.R.; García-Aznar, J.M.. "Computational model of mesenchymal migration in 3D under chemotaxis". Computer Methods in Biomechanics and Biomedical Engineering 20 1 (2017): 59-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84976291227&partnerID=MN8TOARS.
    10.1080/10255842.2016.1198784
  21. Castilho, M.; Rodrigues, J.; Vorndran, E.; Gbureck, U.; Quental, C.; Folgado, J.; Fernandes, P.R.. "Computational design and fabrication of a novel bioresorbable cage for tibial tuberosity advancement application". Journal of the Mechanical Behavior of Biomedical Materials 65 (2017): 344-355. http://www.scopus.com/inward/record.url?eid=2-s2.0-84987615820&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2016.08.036
  22. de Almeida, D.F.; Ruben, R.B.; Folgado, J.; Fernandes, P.R.; Gamelas, J.; Verhegghe, B.; De Beule, M.. "Automated femoral landmark extraction for optimal prosthesis placement in total hip arthroplasty". International Journal for Numerical Methods in Biomedical Engineering 33 8 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85005925823&partnerID=MN8TOARS.
    10.1002/cnm.2844
  23. Folgado, João. "A simple controller to overcome the lack of correlation between forward and inverse dynamic analysis of human motion tasks". Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics (2016): http://dx.doi.org/10.1177/1464419315608336.
    10.1177/1464419315608336
  24. Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.. "A new shoulder model with a biologically inspired glenohumeral joint". Medical Engineering and Physics 38 9 (2016): 969-977. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986564763&partnerID=MN8TOARS.
    10.1016/j.medengphy.2016.06.012
  25. Quental, C.; Folgado, J.; Monteiro, J.; Sarmento, M.. "Full-thickness tears of the supraspinatus tendon: A three-dimensional finite element analysis". Journal of Biomechanics 49 16 (2016): 3962-3970. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006102561&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2016.11.049
  26. Almeida, D.F.; Ruben, R.B.; Folgado, J.; Fernandes, P.R.; Audenaert, E.; Verhegghe, B.; De Beule, M.. "Fully automatic segmentation of femurs with medullary canal definition in high and in low resolution CT scans". Medical Engineering and Physics 38 12 (2016): 1474-1480. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991241277&partnerID=MN8TOARS.
    10.1016/j.medengphy.2016.09.019
  27. Quental, C.; Folgado, J.; Ambrósio, J.. "A window moving inverse dynamics optimization for biomechanics of motion". Multibody System Dynamics 38 2 (2016): 157-171. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975127072&partnerID=MN8TOARS.
    10.1007/s11044-016-9529-4
  28. Coelho, P.G.; Fernandes, P.C.; Folgado, J.; Fernandes, P.R.. "Development of a spinal fusion cage by multiscale modelling: Application to the human cervical spine". Procedia Engineering 110 (2015): 183-190.
    10.1016/j.proeng.2015.06.183
  29. Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.. "Critical analysis of musculoskeletal modelling complexity in multibody biomechanical models of the upper limb". Computer Methods in Biomechanics and Biomedical Engineering 18 7 (2015): 749-759. http://www.scopus.com/inward/record.url?eid=2-s2.0-84911990020&partnerID=MN8TOARS.
    10.1080/10255842.2013.845879
  30. Quental, C.; Folgado, J.; Fernandes, P.R.; Monteiro, J.. "Computational analysis of polyethylene wear in anatomical and reverse shoulder prostheses". Medical and Biological Engineering and Computing 53 2 (2015): 111-122. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925511222&partnerID=MN8TOARS.
    10.1007/s11517-014-1221-3
  31. Martins, A.; Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.; Sarmento, M.. "Computational reverse shoulder prosthesis model: Experimental data and verification". Journal of Biomechanics 48 12 (2015): 3242-3251. http://www.scopus.com/inward/record.url?eid=2-s2.0-84942815691&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2015.06.031
  32. Ribeiro, F.O.; Gómez-Benito, M.J.; Folgado, J.; Fernandes, P.R.; García-Aznar, J.M.. "In silico mechano-chemical model of bone healing for the regeneration of critical defects: The effect of BMP-2". PLoS ONE 10 6 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84934961527&partnerID=MN8TOARS.
    10.1371/journal.pone.0127722
  33. Quental, C.; Fernandes, P.R.; Monteiro, J.; Folgado, J.. "Bone remodelling of the scapula after a total shoulder arthroplasty". Biomechanics and Modeling in Mechanobiology 13 4 (2014): 827-838. http://www.scopus.com/inward/record.url?eid=2-s2.0-84905574100&partnerID=MN8TOARS.
    10.1007/s10237-013-0537-5
  34. Ribeiro, F.O.; Folgado, J.; Garcia-Aznar, J.M.; Gómez-Benito, M.J.; Fernandes, P.R.. "Is the callus shape an optimal response to a mechanobiological stimulus?". Medical Engineering and Physics 36 11 (2014): 1508-1514. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922505636&partnerID=MN8TOARS.
    10.1016/j.medengphy.2014.07.015
  35. Quental, C.; Folgado, J.; Fernandes, P.R.; Monteiro, J.. "Subject-specific bone remodelling of the scapula". Computer Methods in Biomechanics and Biomedical Engineering 17 10 (2014): 1129-1143. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898543927&partnerID=MN8TOARS.
    10.1080/10255842.2012.738198
  36. Chan, Â.; Gamelas, J.; Folgado, J.; Fernandes, P.R.. "Biomechanical analysis of the tibial tray design in TKA: Comparison between modular and offset tibial trays". Knee Surgery, Sports Traumatology, Arthroscopy 22 3 (2014): 590-598. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893935263&partnerID=MN8TOARS.
    10.1007/s00167-013-2628-3
  37. Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.. "Multibody system of the upper limb including a reverse shoulder prosthesis". Journal of Biomechanical Engineering 135 11 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84887828760&partnerID=MN8TOARS.
    10.1115/1.4025325
  38. Ribeiro, Nelson; Folgado, João; Rodrigues, Hélder. "SHAPE OPTIMIZATION OF A CORONARY STENT". Journal of Biomechanics 45 (2012): S642. http://dx.doi.org/10.1016/s0021-9290(12)70643-7.
    10.1016/s0021-9290(12)70643-7
  39. Quental, Carlos; Folgado, João; Fernandes, Paulo; Monteiro, Jacinto. "BONE REMODELLING ANALYSIS OF THE SCAPULA". Journal of Biomechanics 45 (2012): S118. http://dx.doi.org/10.1016/s0021-9290(12)70119-7.
    10.1016/s0021-9290(12)70119-7
  40. Quental, Carlos; Folgado, João; Ambrósio, Jorge; Monteiro, Jacinto. "MULTIBODY SYSTEM OF A REVERSE SHOULDER ARTHROPLASTY". Journal of Biomechanics 45 (2012): S559. http://dx.doi.org/10.1016/s0021-9290(12)70560-2.
    10.1016/s0021-9290(12)70560-2
  41. Almeida, Diogo; Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "DEVELOPMENT OF AN AUTOMATED PROCEDURE FOR A PATIENT SPECIFIC SEGMENTATION OF THE FEMUR BODY". Journal of Biomechanics 45 (2012): S458. http://dx.doi.org/10.1016/s0021-9290(12)70459-1.
    10.1016/s0021-9290(12)70459-1
  42. Ruben, Rui B.; Fernandes, Paulo R.; Folgado, João; Madeira, J.F.A.. "OPTIMUM DESIGN OF CEMENTED HIP PROSTHESES". Journal of Biomechanics 45 (2012): S272. http://dx.doi.org/10.1016/s0021-9290(12)70273-7.
    10.1016/s0021-9290(12)70273-7
  43. Rodrigues, L.B.; Las Casas, E.B.; Lopes, D.S.; Folgado, J.; Fernandes, P.R.; Pires, E.A.C.B.; Alves, G.E.S.; Faleiros, R.R.. "A finite element model to simulate femoral fractures in calves: Testing different polymers for intramedullary interlocking nails". Veterinary Surgery 41 7 (2012): 838-844. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867745936&partnerID=MN8TOARS.
    10.1111/j.1532-950X.2012.01032.x
  44. Ruben, R.B.; Fernandes, P.R.; Folgado, J.. "On the optimal shape of hip implants". Journal of Biomechanics 45 2 (2012): 239-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-84455205555&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2011.10.038
  45. Quental, C.; Folgado, J.; Ambrósio, J.; Monteiro, J.. "A multibody biomechanical model of the upper limb including the shoulder girdle". Multibody System Dynamics 28 1-2 (2012): 83-108. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862527754&partnerID=MN8TOARS.
    10.1007/s11044-011-9297-0
  46. Fernandes, P.C.; Fernandes, P.R.; Folgado, J.O.; Levy Melancia, J.. "Biomechanical analysis of the anterior cervical fusion". Computer Methods in Biomechanics and Biomedical Engineering 15 12 (2012): 1337-1346. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871134207&partnerID=MN8TOARS.
    10.1080/10255842.2011.597351
  47. Quental, C.; Folgado, J.; Fernandes, P.R.; Monteiro, J.. "Bone remodelling analysis of the humerus after a shoulder arthroplasty". Medical Engineering and Physics 34 8 (2012): 1132-1138. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865553450&partnerID=MN8TOARS.
    10.1016/j.medengphy.2011.12.001
  48. Ribeiro, N.S.; Folgado, J.; Fernandes, P.R.; Monteiro, J.. "Wear analysis in anatomical and reversed shoulder prostheses". Computer Methods in Biomechanics and Biomedical Engineering 14 10 (2011): 883-892. http://www.scopus.com/inward/record.url?eid=2-s2.0-84855989795&partnerID=MN8TOARS.
    10.1080/10255842.2010.499868
  49. Ambrósioa, J.; Quental, C.; Pilarczyk, B.; Folgado, J.; Monteiro, J.. "Multibody biomechanical models of the upper limb". Procedia IUTAM 2 (2011): 4-17.
    10.1016/j.piutam.2011.04.002
  50. Monteiro, N.M.B.; Da Silva, M.P.T.; Folgado, J.O.M.G.; Melancia, J.P.L.. "Structural analysis of the intervertebral discs adjacent to an interbody fusion using multibody dynamics and finite element cosimulation". Multibody System Dynamics 25 2 (2011): 245-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-79751536761&partnerID=MN8TOARS.
    10.1007/s11044-010-9226-7
  51. Espinha, L.C.; Fernandes, P.R.; Folgado, J.. "Computational analysis of bone remodeling during an anterior cervical fusion". Journal of Biomechanics 43 15 (2010): 2875-2880. http://www.scopus.com/inward/record.url?eid=2-s2.0-78149281163&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2010.07.027
  52. Barreto, S.; Folgado, J.; Fernandes, P.R.; Monteiro, J.. "The influence of the pelvic bone on the computational results of the acetabular component of a total hip prosthesis". Journal of Biomechanical Engineering 132 5 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77955122388&partnerID=MN8TOARS.
    10.1115/1.4001031
  53. Folgado, J.; Fernandes, P.R.; Jacobs, C.R.; Pellegrini, V.D.. "Influence of femoral stem geometry, material and extent of porous coating on bone ingrowth and atrophy in cementless total hip arthroplasty: an iterative finite element model". Computer Methods in Biomechanics and Biomedical Engineering 12 2 (2009): 135-145. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649094457&partnerID=MN8TOARS.
    10.1080/10255840802546754
  54. Rodrigues, L.B.; Lopes, D.S.; Folgado, J.; Fernandes, P.R.; Pires, E.B.; Casas, E.B.L.; Faleiros, R.R.. "Bone remodelling analysis of a bovine femur for a veterinary implant design". Computer Methods in Biomechanics and Biomedical Engineering 12 6 (2009): 683-690. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950186924&partnerID=MN8TOARS.
    10.1080/10255840902865641
  55. Monteiro, J.; Ribeiro, N.; Folgado, João; Fernandes, P.R.; Sarmento, M.. "Análise do desgaste em próteses totais do ombro pelo método dos elementos finitos". Revista da Sociedade Portuguesa de Ortopedia e Traumatologia 17 Cad.Ensino (2009): 1-58.
  56. Ruben, Rui B.; Folgado, João; Fernandes, Paulo R.. "STEM GEOMETRY DESIGN TO OPTIMIZE THE STABILITY AND THE STRESS SHIELDING EFFECT AFTER A THA". Journal of Biomechanics 41 (2008): S67. http://dx.doi.org/10.1016/s0021-9290(08)70067-8.
    10.1016/s0021-9290(08)70067-8
  57. Folgado, João. "Computational study on bone remodeling and osseointegration for a hip replacement using a conservative femoral stem". International Journal for Computational Vision and Biomechanics 1 1 (2008): 97-106.
    Published
  58. Fialho, J.C.; Fernandes, P.R.; Eça, L.; Folgado, J.. "Computational hip joint simulator for wear and heat generation". Journal of Biomechanics 40 11 (2007): 2358-2366. http://www.scopus.com/inward/record.url?eid=2-s2.0-34447544072&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2006.12.005
  59. Ruben, R.B.; Folgado, J.; Fernandes, P.R.. "Three-dimensional shape optimization of hip prostheses using a multicriteria formulation". Structural and Multidisciplinary Optimization 34 3 (2007): 261-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-34547518851&partnerID=MN8TOARS.
    10.1007/s00158-006-0072-4
  60. Ruben, R.; Folgado, J.; Fernandes, P.R.. "Femoral stem shape optimization for prosthesis stability". Journal of Biomechanics 39 (2006): S516. http://dx.doi.org/10.1016/s0021-9290(06)85117-1.
    10.1016/s0021-9290(06)85117-1
  61. Fernandes, P.R.; Fialho, J.; Folgado, J.; Eça, L.. "Computational simulation of wear rate and heat generation on a hip joint". Journal of Biomechanics 39 (2006): S529. http://dx.doi.org/10.1016/s0021-9290(06)85174-2.
    10.1016/s0021-9290(06)85174-2
  62. Ruben, R.B.; Folgado, J.; Fernandes, P.R.. "Shape optimization of uncemented hip prostheses". Virtual and Physical Prototyping 1 3 (2006): 147-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956323731&partnerID=MN8TOARS.
    10.1080/17452750600942285
  63. Folgado, J.; Fernandes, P.R.; Guedes, J.M.; Rodrigues, H.C.. "Evaluation of osteoporotic bone quality by a computational model for bone remodeling". Computers and Structures 82 17-19 (2004): 1381-1388. http://www.scopus.com/inward/record.url?eid=2-s2.0-3042784072&partnerID=MN8TOARS.
    10.1016/j.compstruc.2004.03.033
  64. Fernandes, P.R.; Folgado, J.; Ruben, R.B.. "Shape optimization of a cementless hip stem for a minimum of interface stress and displacement". Computer Methods in Biomechanics and Biomedical Engineering 7 1 (2004): 51-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-4544227014&partnerID=MN8TOARS.
    10.1080/10255840410001661637
  65. Fernandes, P.R.; Folgado, J.; Jacobs, C.; Pellegrini, V.. "A contact model with ingrowth control for bone remodelling around cementless stems". Journal of Biomechanics 35 2 (2002): 167-176. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036140349&partnerID=MN8TOARS.
    10.1016/S0021-9290(01)00204-4
  66. Fernandes, P.R.; Folgado, João; Rodrigues, H.. "Modelos Computacionais e Experimentais para a análise e projecto de próteses da anca". Mecânica Experimental 8 (2002): 67-78.
  67. Fernandes, P.R.; Folgado, J.; Jacobs, C.; Pellegrini, V.. "Bone ingrowth on cementless femoral stems - A comparison study for two stem geometrics". Journal of Biomechanics 34 SUPPL. 1 (2001): http://www.scopus.com/inward/record.url?eid=2-s2.0-17944403000&partnerID=MN8TOARS.
  68. Folgado, J.; Rodrigues, H.. "Structural optimization with a non-smooth buckling load criterion". Control and Cybernetics 27 2 (1998): 235-253. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032344163&partnerID=MN8TOARS.
Journal issue
  1. Fernandes, Paulo R.; Folgado, João; Silva, Miguel. "Proceedings of ESB2012 - 18th Congress of the European Society of Biomechanics". Journal of Biomechanics, Vol. 45, Supplement 1 45 S1 (2012): http://www.sciencedirect.com/science/journal/00219290/45/supp/S1.
    Invited editor

Other

Other output
  1. Progressive loading pattern during the execution of a simulated transosseous - equivalent rotator cuff repair assembling with two different medial row anchor mechanisms. 2022. Dias, C.M.; Gonçalves, S.B.; Angelo, A.C.; de Campos Azevedo, C.; Mineiro, J.; Ferreira, F.; Folgado, J.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85167392600&partnerID=MN8TOARS.
    10.21203/rs.3.rs-1750848/v1
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2021/09 - Current Biomecânica do ombro após a reconstrução capsular superior: análise das técnicas cirúrgicas e do seu impacto no sucesso clínico
Supervisor of Madalena João da Cruz Antunes
 Engenharia Mecânica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09 - Current Avaliação biomecânica do impacto do calçado desportivo na articulação do tornozelo durante a corrida
Supervisor of Gonçalo Ribeiro Lopes Rodrigues Marta
 Engenharia Mecânica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015 - Current How does surgical technique and material choice influence the contact force, area and pressure at different locations in the tendon bone interface in a rotator cuff model?
Co-supervisor of Carlos Maia Dias
 Bioengenharia (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021 - 2021/12/06 Metaphyseal sleeves, long stems, and tibial plateau bone cement in total knee arthroplasties: computational analysis of bone remodeling
Supervisor of Pedro Afonso Ferreira Nogueira
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021 - 2021/11/30 Influence of Joint Conformity on the Failure Mechanisms of the Glenoid Implant – a finite element analysis
Supervisor of Maria do Carmo Rocha e Melo Belard Raimundo
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021 - 2021/11/29 Damage-based assessment of the risk of cut-out in trochanteric fractures for different PFNA blade positions
Supervisor of Francisco Maria Serra Rebelo de Andrade
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021 - 2021/10/07 Influence of the Intramedullary Stem in Total Knee Arthroplasty
Supervisor of Sara Beatriz Marques Freitas
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020 - 2021/01/15 Initial fascia lata graft positioning in the superior capsular reconstruction: computational analysis of shoulder stability
Supervisor of Madalena João da Cruz Antunes
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020 - 2021/01/13 Computational Modelling of Flatfoot Deformity
Supervisor of Mariana Rocha Alves
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020 - 2020/10/30 Influence of the femoral head screw position on the risk of cut-out in trochanteric fractures: a computational analysis
Supervisor of Sara Raquel Reis de Vasconcelos
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020 - 2020/10/22 Towards echocardiographic strain imaging of the mitral valve leaflets using block matching approaches
Supervisor of Ana Lúcia Grilo Martins de Brito Barriga
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010 - 2020/10/21 Surrogate-based design optimization of coronary stents
Supervisor of Nelson da Silva Ribeiro
 Engenharia Biomédica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2019/07/09 Impacto da erosão escapular no comportamento mecânico da artroplastia inversa do ombro: estudo computacional de elementos finitos
Supervisor of Inês Sesinando Agulheiro
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2019/07/03 Rotura da coifa dos rotadores: Importância dos sistemas de ancoragem tendinosa e dos factores de crescimento na cicatrização tecidular
Co-supervisor of Marco Aurélio Carmelino Cardoso Sarmento
 Medicina (PhD)
Universidade de Lisboa Faculdade de Medicina, Portugal
2018 - 2018/11/29 Analysis of the Bone Stresses for a Posterior Stabilized Knee Prosthesis with an Endomedullary Stem
Supervisor of Maria Carolina Guimarães da Silva Moreira
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018/11/28 Influence of the geometry of stemless implants on the bone adaptation process of the humerus: a computational analysis
Supervisor of Manuel Rosado Nunes Comenda
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018/11/26 Computational study of the contact patterns in the ankle joint after ligamentous injury
Supervisor of Gonçalo Ribeiro Lopes Rodrigues Marta
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018/11/23 Development of an automatic 2D-3D image matching method for reproducing three-dimensional humeral positions using single and dual plane fluoroscopy
Supervisor of Filipa Pinto Leal
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018/11/22 Supraspinatus tendon repair - A three-dimensional finite element analysis
Supervisor of João Pedro Couto Reis
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018/04/12 Bone remodeling model including overload simulation
Supervisor of Bernardo Afonso Gonçalves Ferreira Rodrigues
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017/11/23 Bone remodelling analysis of the tibia after a total knee arthroplasty
Supervisor of Ana Rita Vilhena Tavares Martins Ribeiro
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017/11/16 Bone remodeling analysis of the humerus after resurfacing and stemless shoulder arthroplasties
Supervisor of Beatriz Ferreira dos Santos
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017/09/11 Influence of the characteristics of the implant on the stress distribution of the humerus after a shoulder resurfacing arthroplasty
Supervisor of Daniela Filipa Guerra Burrinha
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017/06/16 Computational Analysis of the Flow in the Left Coronary Arteries: Inuence of the Artery Elasticity and the Presence of the Stent in Blood Flow
Supervisor of Bernardo de Sousa Lopes Diogo
 Engenharia Aeroespacial (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017/02/16 A Total Hip Replacement Toolbox: From CT-Scan to Patient-Specific FE Analysis
Co-supervisor of Diogo Moreira Campos Ferreira de Almeida
 Engenharia Biomédica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016/11/29 Inverse Dynamic Analysis of the Human Locomotion Apparatus for Gait
Supervisor of Hélder Jorge Carrapatoso Oliveira
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016/11/22 Análise computacional da resistência de implantes dentários
Supervisor of Soraia Isabel Correia Ribeiro
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016/11/14 Biochemical and biomechanic integrated modeling of bone
Supervisor of Joana de Castro Capacete
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016/11/07 Análise computacional da fractura em corpos vertebrais
Co-supervisor of Cristina Cardoso Alves
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016/07/04 Análise computacional do scapular notching na artroscopia do ombro com prótese inversa
Supervisor of João Miguel Pereira Batista
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 - 2016/06/24 Multiscale Modeling of the Bone Healing Process
Co-supervisor of Frederico Canas de Matos e Oliveira Ribeiro
 Engenharia Biomédica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015 - 2015/05/27 Biomechanical Analysis of the Human Lumbar Spine: An Experimental and Computational Approach
Co-supervisor of Sofia Pedroso de Faria
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/12/09 Biomechanics of the Total Knee Replacement: Predicting the effect of the tibial component’s alignment in the fixation of the implant
Supervisor of Teresa Margarida da Ponte Rodrigues Pereira
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/12/05 Finite Element Analysis of the ACL-deficient Knee
Co-supervisor of David Jorge Carvalho Fernandes
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/12/01 Análise da remodelação óssea após Artroplastia Total do Tornozelo
Co-supervisor of Ana Margarida Martins Barata
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/11/27 Combined Topology and Stacking Sequence Optimization of Composite Laminated Structures for Structural Performance Measure
Co-supervisor of Gonçalo Pinto Rodrigues
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/11/26 Biomechanical analysis of the influence of different tibial tray designs in TKA
Supervisor of Ângela Vanessa Chan
 Engenharia Biomédica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/11/24 Aplicação de algoritmos para geração automática de malhas de elementos finitos hexaédricas
Supervisor of Luis Miguel Rodrigues Reis
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2014/06/25 Computational and experimental analysis of the vertebral column for the intervertebral fusion study
Co-supervisor of Ana Catarina Costa Roque Soares Pires
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 - 2013/11/08 Biomechanical tools for the analysis of the native and prosthetic shoulders
Supervisor of Carlos Miguel Fernandes Quental
 Engenharia Biomédica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 - 2013/06/14 Biomechanics of the Total Ankle Arthroplasty: Stress Analysis and Bone Remodeling
Co-supervisor of Daniela Sofia de Oliveira Salgado Rodrigues
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 - 2013/06/14 Biomechanical modeling of the upper limb - experimental and computational evaluation
Supervisor of Ana Isabel de Simas Martins
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011 - 2011/11/25 Computational Modeling of Long Bone Fracture Healing
Co-supervisor of Frederico Canas de Matos e Oliveira Ribeiro
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011 - 2011/11/15 Analysis of bone remodeling in the tibia after total knee prosthesis
Supervisor of Tiago José Fonseca Robalo
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010 - 2010/11/10 Influência na distribuição das cargas, do alinhamento da componente tibial numa prótese total do joelho
Supervisor of Daniel de Castilho Paulo
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009 - 2009/11/25 Analysis of the intervertebral discs adjacent to interbody fusion using a multibody and finite element co-simulation
Supervisor of Nuno Miguel Barroso Monteiro
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009 - 2009/11/13 Biomechanical analysis of the tibial tray design in TKA: comparison between modular and offset tibial trays
Co-supervisor of Ângela Vanessa Chan
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009 - 2009/11/03 Computational Analysis of Bone Remodeling During an Anterior Cervical Fusion
Co-supervisor of Lina Maria Correia Espinha
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009 - 2009/06/08 Análise da remodelação óssea devido ao movimento dentário provocado pelo aparelho ortodôntico
Co-supervisor of Zélia Diana Viola Andrade Santos
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009 - 2009/01/09 Projecto Óptimo de Próteses da Articulação da Anca
Co-supervisor of Rui Miguel Barreiros Ruben
 Engenharia Mecânica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008 - 2008/11/18 The influence of the pelvic bone on computational results of the acetabular component of a total hip prosthesis
Supervisor of Sara Adriana Loureiro Barreto
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008 - 2008/11/18 Influência do diâmetro e do material nas pressões de contacto na componente acetabular de uma prótese total da anca
Co-supervisor of Diogo Moreira Campos Ferreira de Almeida
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008 - 2008/11/18 Comparação do Desgaste em Diferentes Modelos da Prótese do Ombro
Supervisor of Nelson da Silva Ribeiro
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008 - 2008/11/04 Estudo da remodelação óssea no úmero após uma artroplastia do ombro
Supervisor of Carlos Miguel Fernandes Quental
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008 - 2008/10/27 Vibration Analysis of an Engine Mount
Co-supervisor of Fernando Manuel Duarte Ramos
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008 - 2008/10/21 Modelação e Análise da Fusão Inter-Somática Cervical
Co-supervisor of Paula Cristina do Rosário Fernandes
 Engenharia Biomédica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2006 - 2006/04 Modelação por Elementos Finitos das Condições de Osteointegração de Componentes Femorais de Próteses de Anca Não Cimentadas
Supervisor of Rui Pedro Alves Rebelo Andrade
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2006 - 2006/04 Análise Numérica e Experimental da Estabilidade de uma Prótese da Anca
Co-supervisor of Rogério Rodrigues
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2022/06/26 - 2022/06/29 Member of the Local Organizing Committee of “ESB 2022 – 27th Congress of the European Socitey of Biomechanics”, Porto, Portugal, 26-29 June 2022 (2022/06/26 - 2022/06/29)
Congress (Member of the Organising Committee)
2022/04/11 - 2022/04/13 Member of the Organizing Committee (as Conference Chair) of ¿ICCB 2022 ¿ IX International Conference on Computational Bioengineering¿, Lisbon, Portugal (2022/04/11 - 2022/04/13)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2019/07/07 - 2019/07/10 Co-organizer of track 20 “Implants/orthotics/prosthetics/devices", organized by Paulo Fernandes, João Folgado, Harry Van Lenthe, Peter Varga, in “25th Congress of the European Society of Biomechanics (ESB 2019)”, Vienna, Austria (2019/07/07 - 2019/07/10)
Symposium (Co-organisor)
2019/07/01 - 2019/07/03 Co-organizer of thematic session “Computational biomechanics and applications”, organized by Renato Natal, Begoña Calvo, João Folgado, Estefanía Peña, in “CMN2019, Congresso de Métodos Numéricos em Engenharia”, Guimarães, Portugal (2019/07/01 - 2019/07/03)
Symposium (Co-organisor)
2018/09/17 - 2018/09/19 Member of the Organizing Committee of “EngOpt 2018 – 6th International Conference on Engineering Optimization”, Lisbon, Portugal (2018/09/17 - 2018/09/19)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2018/09/17 - 2018/09/19 Co-organizer of symposium “MS03 - Optimization Methods in Biomechanics and Biomedical Engineering”, organized by P.R. Fernandes and J. Folgado, in “EngOpt2018, 6th International Conference on Engineering Optimization”, Lisbon, Portugal (2018/09/17 - 2018/09/19)
Symposium (Co-organisor)
2018/03/26 - 2018/03/29 Member of the Organizing Committee of “CMBE2018 – The 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, and the 3rd Conference on Image and Visualization”, Lisbon, Portugal, 26-29 March 2018 (2018/03/26 - 2018/03/29)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2017/02/10 - 2017/02/11 Member of the Organizing Committee of “7º Congresso Nacional de Biomecânica (CNB2017)”, Guimarães, Portugal (2017/02/10 - 2017/02/11)
Congress (Member of the Organising Committee)
2015/09/02 - 2015/09/04 Member of the Organizing Committee of “ICCST/10 – 10th International Conference on Composite Science and Technology”, Lisbon, Portugal (2015/09/02 - 2015/09/04)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2015/06/29 - 2015/07/02 Co-organizer of thematic session “Computational biomechanics and applications”, organized by João Folgado, Renato Natal, Begoña Calvo, Estefanía Peña, in “CMN2015, Congresso de Métodos Numéricos em Engenharia”, Lisboa, Portugal (2015/06/29 - 2015/07/02)
Symposium (Co-organisor)
2015/06/25 - 2015/06/27 Member of the Organizing Committee of “ICTE2015, International Conference on Tissue Engineering: An ECCOMAS Thematic Conference”, Lisboa, Portugal (2015/06/25 - 2015/06/27)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2015/02/06 - 2015/02/07 Member of the Organizing Committee of “6º Congresso Nacional de Biomecânica (CNB2015)”, Leiria, Portugal (2015/02/06 - 2015/02/07)
Congress (Member of the Organising Committee)
2014/09/08 - 2014/09/11 Member of the Organizing Committee of “EngOpt 2014 – 4th International Conference on Engineering Optimization”, Lisbon, Portugal (2014/09/08 - 2014/09/11)
Conference
 Instituto de Engenharia Mecânica, Portugal
2014/09/08 - 2014/09/11 Co-organizer of symposium “MS04 - Optimization Methods in Biomechanics and Biomedical Engineering”, organized by P.R. Fernandes and J. Folgado, in “EngOpt2014, 4th International Conference on Engineering Optimization”, Lisbon, Portugal (2014/09/08 - 2014/09/11)
Symposium (Co-organisor)
2013/06/25 - 2013/06/28 Co-organizer of thematic session “ST23 – Computational biomechanics and applications”, organized by João Folgado, Begoña Calvo, Renato Natal, Estefanía Peña, in “CMN 2013, Congreso de Métodos Numéricos en Ingeniería”, Bilbao, Espanha (2013/06/25 - 2013/06/28)
Symposium (Co-organisor)
2012/07/01 - 2012/07/04 Member of the Organizing Committee of (as Co-Chairman) do “ESB-2012, Portugal, 1-4 July 18th Congress of the European Society of Biomechanics”, Lisbon, 2012 (2012/07/01 - 2012/07/04)
Congress (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/06/14 - 2011/06/17 Co-organizer of thematic session “ST22 - Modelling of biological and biomimetic healing”, organized by Etelvina Javierre e J. Folgado, in “CMNE2011, Congresso de Métodos Numéricos em Engenharia”, Coimbra, Portugal (2011/06/14 - 2011/06/17)
Symposium (Co-organisor)
2011/06/02 - 2011/06/04 Member of the Organizing Committee of “ICTE2011, International Conference on Tissue Engineering: An ECCOMAS Thematic Conference”, Lisboa, Portugal (2011/06/02 - 2011/06/04)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2010/09/06 - 2010/09/09 Member of the Organizing Committee of “EngOpt 2010 – 2nd International Conference on Engineering Optimization”, Lisbon, Portugal (2010/09/06 - 2010/09/09)
Conference (Member of the Organising Committee)
 Instituto de Engenharia Mecânica, Portugal
2010/09/06 - 2010/09/09 Co-organizer of symposium “MS11 - Optimization in Biomechanics and Biomedical Engineering”, organized by H. Rodrigues, P. Fernandes and J. Folgado, in “EngOpt 2010, International Conference on Engineering Optimization”, Lisbon, Portugal (2010/09/06 - 2010/09/09)
Symposium (Co-organisor)
2009/07/09 - 2009/07/11 Member of the Local Organizing Committee of “ICTE2009, International Conference on Tissue Engineering: An ECCOMAS Thematic Conference”, Leiria, Portugal (2009/07/09 - 2009/07/11)
Conference (Member of the Organising Committee)
2009/06/01 - 2009/06/05 Member of the Organizing Committee of (as conference manager) do “WCSMO-8 - 8th World Congress of Structural and Multidisciplinary Optimization”, Lisbon, Portugal (2009/06/01 - 2009/06/05)
Congress (Member of the Organising Committee)
2009/05/25 - 2009/05/27 Member of the Organizing Committee of “Spring School in Advanced Computing TACC @ IST” (TACC Workshop)”, Lisbon, Portugal (2009/05/25 - 2009/05/27)
Workshop (Member of the Organising Committee)
2005/09/14 - 2005/09/16 Member of the Local Organizing Committee of “II International Conference on Computational Bioengineering (ICCB2005)”, Lisbon (2005/09/14 - 2005/09/16)
Conference

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2021/12/02 Energetic Analysis of the Ankle Musculoskeletal Complex with a Passive Spring Exoskeleton
President of the jury
 Maria Leonor Palminha Alves (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/11/30 Machine Learning for clinical course analysis in sepsis patients
President of the jury
 Pedro Miguel Ferreira dos Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/10/15 Biomechanical Analysis of the Crystalline Lens Complex: A Computational Model
(Thesis) Main arguer
 Leonor Mariana Jud Guedes de Campos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01/21 Biomechanical Analysis of Lumbar Disc Degeneration Before and After Spinal Fusion
President of the jury
 Maria Inês Vieira Godinho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01/21 Computational Scaffold Design for Bone Tissue Engineering: TPMS and Optimized Models
President of the jury
 Eva Pavão Medeiros (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/12/21 Reliability and Availability Assessment of a cargo locomotive bogie - A contribution to a RAMS Analysis in the FGC case study
President of the jury
 Manuel Derichsweiler Bessa Pereira Leite (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/10/23 Desenvolvimento de uma unidade móvel para a recuperação de vidro de embalagem
President of the jury
 Ricardo Manuel Afonso Batista (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/10/19 Public Service Obligations (PSOs) in Air Transport - A Benchmarking approach
President of the jury
 João Miguel Mateus Ferreira da Costa (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/10/14 Study of four point bending specimen geometry
President of the jury
 João Subtil Lobo (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/10/14 Projeto e desenvolvimento de um manipulador para transporte de dispositivos de fixação para medição
President of the jury
 Diogo Faria Neves Mendes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/10/07 Predicting maintenance needs in railway wheelsets using Survival modelling
President of the jury
 Guilherme Amaral Cruz e Horta Caldeira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/09/25 Metodologias integradas de CAD, CAE e PDM para o projeto de um veiculo de competição
President of the jury
 Pedro Ferreira Sardinha Diogo de Matos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/04/24 Optimizing maintenance decisions in rails - a Markov decision process approach
President of the jury
 Luis Pedro Correia Beatriz Sancho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/04 Validation of a lower-limb musculoskeletal model for the estimation of hip joint contact forces using na energy-based cost function
President of the jury
 Margarida Oliveira Brotas de Carvalho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/04 Optimization of Structures in Composite Reinforced by Fiber and Bidimensional Addictive Processes
(Thesis) Main arguer
 Pedro Miguel Alves da Costa (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/03 Design and Structural Analysis of a Tension Leg Platform for Offshore Wind Power
President of the jury
 Vicente Durão Liberato Salgueiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/03 Projeto estrutural e fabrico de uma turbina eólica de eixo vertical para utilização residencial
President of the jury
 Celmar Fonseca Garcia (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/02 Gate Assignment Problem: a case study of Lisbon airport
President of the jury
 João Manuel Santos Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/02 Otimização multi-objetivo de placas compósitas curvas
President of the jury
 Fábio Miguel Cascalheira Aguincha (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/29 Design of an automated aerodynamic guide vane mechanism for a micro compressor
President of the jury
 David Carreira Ribeiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/29 Study of the Derailment Potential of Railway Cargo Vehicles as a Function of the Loading Characteristics
President of the jury
 João Emanuel Carvalho Pagaimo (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/26 Towards high resolution resting-state fMRI in the mouse brain
President of the jury
 Bárbara Polena Pacheco Araújo Costa (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/25 Projecto de uma unidade móvel de recuperação de vidro
President of the jury
 João Carlos Firmino Arrais (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/25 Análise da integridade estrutural da transmissão de potência de um TUK TUK
President of the jury
 Inês Alexandra Serrão Mendes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/25 Predicting thumb osteoarthrosis using morphology: a 3D statistical shape analysis
(Thesis) Main arguer
 Ana Bandarrinha Brandão (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/22 Projecto e manufactura de um componente em material compósito reforçado por fibras de basalto para aplicação num protótipo eléctrico de alta eficiência
President of the jury
 Diogo Tomé Fernandes de Abreu Ribeira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/21 Projeto de duas cadeiras de rodas para a praia
President of the jury
 Sara Ramos Couto Pinto (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/19 3D Biomechanical modelling of the human lens complex under cataract surgery
(Thesis) Main arguer
 Joana Sousa Paulino (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/18 Brake Caliper Design and Optimisation for a Formula Student Vehicle
President of the jury
 Diogo Paulo Martins Ferreira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/18 Augmenting Dummies for Training Central Venous Catheterization
President of the jury
 Helena Catarina Margarido Mendes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/18 Computational fluid dynamics simulation of TPMS scaffolds for bone tissue engineering
President of the jury
 Tiago Alexandre Hilário Veríssimo Pires (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/13 Projeto de Melhoria do Sistema de Suspensão de um AGV com vista à Redução dos Custos de Produção
President of the jury
 Ana Luísa Marques de Carvalho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/13 Mechanical Design of a Formula Student Electric Motor
President of the jury
 Bruno António dos Santos Fernandes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09/19 Cervical arthroplasty caracterization study – in-vivo biomechanical characteristics
(Thesis) Arguer
 Filipe Alexandre Loureiro Pagaimo (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/06/27 Biomechanical Analysis of the Shoulder Joint Motion in Patients with Rotator Cuff Tendinopathy
(Thesis) Main arguer
 Joana Carita Nunes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/11/27 Multi-Objective Topology Optimization for Bi-dimensional Structures
(Thesis) Main arguer
 Pedro Simão De Assunção Caldeira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/11/23 Computational modelling of train braking system
(Thesis) Main arguer
 José Pedro Machado dos Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/11/12 Modelling of the human lens complex under cataract surgery
(Thesis) Main arguer
 Maria Teresa Andrade Santos Leitão Cardoso (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/07/02 Desenvolvimento de um dispositivo para tensionamento de ligamentos
(Thesis) Main arguer
 Henrique Homem de Matos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/06/20 Investigation of the influence of fuselage door surrounding structure’s geometric parameters on the weight and mechanical response of the fuselage
(Thesis) Main arguer
 Ana Maria Carrasquinho de Macedo (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/04/06 Efficient Aerodynamic Optimization of Aircraft Wings
(Thesis) Main arguer
 Pedro Miguel Veríssimo Rodrigues (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/17 A computational approach to the study of bone quality in osteoporosis
(Thesis) Main arguer
 Luís Miguel Francisco Santos (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/12/11 Study of the internal stresses in the capsular bag after the implantation of an intraocular lens and the causes of its dislocation
(Thesis) Main arguer
 Carlos Sagarra Lopez (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/11/29 Development of an ankle testing device with three degrees of freedom
(Thesis) Main arguer
 Francisco Clavel Perestrelo Caiado (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/11/17 Non-linear mixed effect models for mechanical trials of biomaterials
(Thesis) Main arguer
 André Filipe Martins Abreu (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/11/15 Topology optimization of microstructures with constraints on average stress and material properties
(Thesis) Main arguer
 Alexandre Manuel de Almeida Monteiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/10/25 Evaluating the mechanical properties of biological soft tissues using inverse methods: application to the pelvic floor muscles
(Thesis) Main arguer
 Maria Elisabete Teixeira da Silva (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2017/09/08 Proposal of a pre-clinical test to access the biomechanical performance of shoulder prosthesis
(Thesis) Main arguer
 Ana Margarida Ramos Bola (PhD)
Universidade de Aveiro, Portugal
2017/06/19 Simulação discreta de partículas num tambor rotativo horizontal: Quantificação da incerteza dos parâmetros físicos do meio granular
(Thesis) Main arguer
 Pedro Miguel Andrade Fernandes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/11/23 Preoperative planning software for corrective osteotomy in cubitus varus and cubitus valgus
(Thesis) Main arguer
 João Tiago Pião Martins (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/11/10 A Software for quantitative analysis for intervertebral movement based on medical images
(Thesis) Main arguer
 Júlia Fernanda Moreno Pinheiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/07/06 Otimização de reforços em painéis planos com vigas standard utilizando métodos de otimização discreta para critérios de rigidez
(Thesis) Main arguer
 José Miguel Candeias Santos Mareco (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/06/22 Biomechanical Analysis of Gait in Subjects with Psoriatic Arthritis
(Thesis) Main arguer
 Carolina Sofia Lopes Samouqueiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/06/14 Vasculature Optimization of Actively-Cooled Materials
(Thesis) Main arguer
 Gonçalo Ferreira Nunes Gouveia Valente (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/11/24 Desenvolvimento de um dispositivo médico de diagnóstico para as lesões do tornozelo
(Thesis) Main arguer
 Sara Luísa Ferreira Fernandes Ornelas Pestana (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/11 Shape Optimization of Cementless Femoral Implant Using Genetic Algorithms
(Thesis) Arguer
 Souptick Chanda (PhD)
Indian Institute of Technology Kharagpur, India
2015/06/23 Computational analysis of the effect of physical activity on the changes in femoral bone density in prepubertal children
(Thesis) Main arguer
 Pieter-Jan Hendrikus Alexander Terryn (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/12/03 Development of a Musculotendon Model Within the Framework of Multibody Systems Dynamics
(Thesis) Main arguer
 Ana Rita Sousa de Oliveira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/11/27 Optimização de Localização de Reforços em Painéis Planos e Cilíndricos
(Thesis) Main arguer
 Hugo Filipe Macedo de Pina (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/11/26 Computational Modelling of the Biodegradation Process in a Scaffold for Tissue Engineering
(Thesis) Main arguer
 Carolina Inês Amaro Verdasca Gorriz (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/07/30 Análise estrutural do quadro de um motociclo
(Thesis) Main arguer
 Diogo da Fonseca Rodrigues Valentim Rechena (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/12/03 A comprehensive foot model for gait analysis of patients with psoriatic arthrithis
(Thesis) Main arguer
 Miguel Nobre Castro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/11/04 Biomechanical modelling of the femoroacetabular impingement of the cam type
(Thesis) Main arguer
 Joana Marta Miguel Lourenço (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/03/18 Permeability Analysis of Scaffolds in Bone Tissue Engineering using Computational Fluid Dynamics
(Thesis) Main arguer
 Vanessa Rubina Segura Marques (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012/12/19 Optimização Estrutural em Componente Aeronáutico Sujeito a Critério de Estabilidade com Descontinuidade na Primeira Derivada
(Thesis) Main arguer
 João Carlos dos Santos Campos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012/12/12 Analise de Próteses da Anca Cimentadas
(Thesis) Main arguer
 Ângela Soares Pedrosa (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2012/12/10 Determination of Individual Muscle Forces Using Multibody Dynamics and Experimental EMG Data
(Thesis) Main arguer
 Marta Cristina Gonçalves Farracho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012/11/28 Matching of a Hierarchical Muscle Fatigue Model with Subject-specific Endurance Times
(Thesis) Arguer
 João António Sobral Leite Veiga (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012/11/26 Caracterização das Propriedades Mecânicas Equivalentes em Placas
(Thesis) Main arguer
 Segismundo Maria Temudo de Castro de Bragança (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012/04/03 Computational Analysis of the Dependence of Ward’s Area Position with Physical Activity
(Thesis) Main arguer
 Miguel Monteiro Maia Machado (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/12/21 Comportamento mecânico de um acetabulo com abas versus sem abas
(Thesis) Main arguer
 Diogo Henriques Teixeira (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2011/12/14 Biomechanical Analysis of Surgical Movements in Robotic Hip Resurfacing
(Thesis) Main arguer
 Marta Caeiro de Sousa e Meneses (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010/11/30 Skin Strain Field Analysis of the Human Ankle Joint
(Thesis) Main arguer
 Sara Sofia Pereira Marreiros (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010/11/26 Caracterização das Propriedades Mecânicas Equivalentes em Placas
(Thesis) Main arguer
 Teresa Sofia Marques Mesquita (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2009/11/13 Optimização de Topologia de Reforços em Painéis Planos
(Thesis) Main arguer
 Edson Bezerra Leal da Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2007/04 Análise Numérica da Interface Osso-Cimento na Artroplastia da Anca
(Thesis) Main arguer
 Cláudia Raquel Jeca dos Ovos Dias Nabais (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2007/01 Optimização Hierárquica da Topologia e do Material em Problemas Térmicos
(Thesis) Main arguer
 Ricardo Manuel Santos Carvalho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Journal scientific committee

Journal title (ISSN) Publisher
2017 - Current International Journal for Numerical Methods in Biomedical Engineering (2040-7947) Wiley (John Wiley & Sons)
2014 - Current PLoS ONE (1932-6203) Public Library of Science
2014 - Current Medical & Biological Engineering & Computing (1741-0444) Springer-Verlag
2013 - Current Annals of Biomedical Engineering (1573-9686) Springer-Verlag
2012 - Current Structural and Multidisciplinary Optimization (1615-1488) Springer-Verlag
2012 - Current Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine (2041-3033) SAGE Publications
2011 - Current Computer Methods in Biomechanics & Biomedical Engineering (1476-8259) Informa UK (Taylor & Francis)
2009 - Current Medical Engineering & Physics (1350-4533) Elsevier
2009 - Current Journal of Biomechanics (0021-9290) Elsevier
2009 - Current Multibody System Dynamics (1573-272X) Springer-Verlag
2016 - 2016 Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Springer-Verlag
2015 - 2015 Computers in Biology and Medicine (0010-4825) Elsevier
2014 - 2014 Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería (1886-158X) "Scipedia, S.L."
2014 - 2014 Computers & Structures (0045-7949) Elsevier
2013 - 2013 Journal of Mechanics in Medicine and Biology (1793-6810) World Scientific
2010 - 2010 Shock and Vibration (1875-9203) Hindawi Limited
2009 - 2009 EURASIP Journal on Advances in Signal Processing (1687-6180) Springer (Biomed Central Ltd.)
2009 - 2009 Inverse Problems in Science and Engineering (1741-5985) Informa UK (Taylor & Francis)
2009 - 2009 Optimization and Engineering (1573-2924) Springer-Verlag
Distinctions

Award

2019 Co-autoria do trabalho “Prémio Jovem Investigador João Martins”, atribuído a M Comenda pelo trabalho: M Comenda, C Quental, J Folgado, M Sarmento, J Monteiro, Análise computacional da influência da geometria de implantes sem haste ..., 8º CNBiomecânica
Sociedade Portuguesa de Biomecânica, Portugal
2015 Co-autoria do trabalho “Prémio Jovem Investigador João Martins”, atribuído a Carlos Quental pelo trabalho: C Quental, J Folgado, J Ambrosio, J Monteiro, Modelo multicorpo do membro superior – dinâmica inversa com translações na articulaç, 6º CNBiomecânica
Sociedade Portuguesa de Biomecânica, Portugal
2013 Co-autoria do trabalho “Prémio Melhor Artigo de Estudante", atribuído ao Frederico Ribeiro pelo trabalho: F. Ribeiro, P.R. Fernandes, J. Folgado, J.M. García-Aznar, Is the callus shape an optimal response to a mechanobiological stimulus?, 5º CNBiomecânica
Sociedade Portuguesa de Biomecânica, Portugal
2013 Co-autoria do trabalho “Prémio Prof. Nuno Rilo", atribuído ao Diogo Almeida pelo trabalho: DF Almeida., RB Ruben, J Folgado e PR Fernandes, Segmentação do fémur com recurso a contornos activos para apoio à artroplastia total da anca, 5º CNBiomecânica
2011 Co-autoria do trabalho “Prémio Jovem Investigador João Martins”, atribuído ao Prof. Rui Ruben pelo trabalho: R.B.Ruben, P.R.Fernandes, J.Folgado, Optimização de forma da haste cimentada da prótese da anca, 4º Congresso Nacional Biomecânica
Sociedade Portuguesa de Biomecânica, Portugal
2009 Prémio Jorge Mineiro
Sociedade Portuguesa de Ortopedia e Traumatologia, Portugal