???global.info.a_carregar???
Raul Duarte Salgueiral Gomes Campilho has a PhD in Mechanical Engineering (2009) and a Habilitation in Mechanical Engineering, both from the Faculty of Engineering of the University of Porto (Portugal). He is an auxiliary professor of the Mechanical Engineering department of ISEP – School of Engineering, Polytechnic University of Porto (Portugal), where he teaches several courses of the Bachelor and Master degree in Mechanical Engineering. Since 2023 he is the vice-director of CIDEM – Centre for Research & Development in Mechanical Engineering. He develops his research activities in ISEP and INEGI – Institute of Science and Innovation in Mechanical and Industrial Engineering, which is a Research and Technology Organization (RTO), and is affiliated to the LAETA – Associate Laboratory of Energy, Transports and Aerospace. His research mainly focuses on adhesive joints; structural adhesives; design of bonded joints; experimental testing; Finite Element Method; Extended Finite Element Method; Meshless Methods; Cohesive Zone Models; composite materials; numerical modelling of composite materials; micromechanics; macromechanics; design of mechanical structures; flexible production; automation; robotics; and actuator systems. He was the principal investigator of 1 national R&D project and participated/participates as a researcher in 6 national R&D projects, all funded through competitive calls. He also participated in 1 R&D project in collaboration with the Portuguese industry (funded through competitive calls). He is/was the (co)supervisor of 6 PhD (1 concluded and 5 ongoing) and 258 MSc thesis. His publication record contains 340 articles & reviews published in Web of Science-indexed journals and 154 book chapters. He also coedited 3 books and was the (co)author of over 400 communications that were presented in international conferences and 18 communications presented in national conferences.
Read full resume ↓
Identification

Personal identification

Full name
Raul Duarte Salgueiral Gomes Campilho

Citation names

  • Campilho, Raul
  • Campilho, R.D.S.G.

Author identifiers

Ciência ID
0314-43B9-03D4
ORCID iD
0000-0003-4167-4434

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Spanish; Castilian Intermediate (B1) Advanced (C1) Intermediate (B1) Intermediate (B1)
French Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2020/09/11
Concluded
 Habilitation in Mechanical Engineering (Título de Agregado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Finite Element Method" (THESIS/DISSERTATION)
 Unanimously approved
2009/06/25
Concluded
 Ph.D. in Mechanical Engineering (Doutoramento)
Major in Applied mechanics
Universidade do Porto Faculdade de Engenharia, Portugal
"Repair of Composite and Wood Structures" (THESIS/DISSERTATION)
 Unanimously approved with distinction
2006
Concluded
 M.Sc. in Mechanical Engineering - Profile of Mechanical Constructions (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Modeling the Execution of Repairs in Composite Materials" (THESIS/DISSERTATION)
 Very Good
2003
Concluded
 Graduation in Mechanical Engineering - Transport Branch (Licenciatura)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
"-" (THESIS/DISSERTATION)
 16
Affiliation

Science

Category
Host institution 		Employer
2013 - Current Researcher (Research) Associated Laboratory for Energy Transports and Aeronautics, Portugal
2011 - 2013 Researcher (Research) Instituto Politécnico do Porto Centro de Investigação e Desenvolvimento em Engenharia Mecânica, Portugal
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2009 - 2011 Researcher (Research) Associated Laboratory for Energy Transports and Aeronautics, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2013/09/16 - Current Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2009/10/01 - 2013/09/30 Assistant Professor (University Teacher) Universidade Lusófona do Porto, Portugal
Universidade Lusófona do Porto, Portugal
2010/04/05 - 2013/07/31 Invited Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2003/10/01 - 2005/03/15 Assistant (Polytechnic Teacher) Instituto Politécnico do Porto Escola Superior de Hotelaria e Turismo, Portugal
Instituto Politécnico do Porto Escola Superior de Hotelaria e Turismo, Portugal

Others

Category
Host institution 		Employer
2023/09 - Current Deputy director of research center CIDEM - Centre for Research & Development in Mechanical Engineering (ISEP) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2022 Deputy Director of the Master in Mechanical Engineering Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2009/10/01 - 2013/09/30 Director of the Degree in Industrial Management and Engineering Universidade Lusófona do Porto, Portugal
Universidade Lusófona do Porto, Portugal
Projects

Contract

Designation Funders
2023/01/01 - Current DRIVOLUTION - Transition to the Factory of the Future
C644913740-00000022
Researcher
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Ongoing
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Researcher
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/07/26 - 2022/07/25 Development of constitutive models and tools for the static and dynamic design of structural adhesive joints
POCI-01-0145-FEDER-028351
Principal investigator
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
2018/07/26 - 2021/06/25 Fracture envelope of adhesives at high strain rates
POCI-01-0145-FEDER-029839
Co-Principal Investigator (Co-PI)
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
2018/07/26 - 2021/06/25 Design methodology for impact resistant bonded multi-material automotive structures
POCI-01-0145-FEDER-028473
Researcher
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
2013/04/01 - 2016/03/31 Development of a cohesive zone model for adhesive joints that includes environment and fatigue degradation
EXCL/EMS-PRO/0084/2012
Researcher
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
2011/01/01 - 2012/12/31 The use of the Boundary Element Method (BEM) in the analysis of adhevive joints
PEst-OE/EME/LA0022/2011
Researcher
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
2006/09 - 2010/08 MOMENTUM | Multidisciplinary Research and Training in Composite Materials Applications in Transport Modes | repair and fire behaviour of composites
NA
Researcher
Associated Laboratory for Energy Transports and Aeronautics, Portugal
Concluded
2007/08 - 2010/07 Repair of wood structures using artificial composites
PTDC/EME-PME/64839/2006
Researcher
Associated Laboratory for Energy Transports and Aeronautics, Portugal
 Associação para a Inovação e Desenvolvimento da FCT
Concluded
Outputs

Publications

Book
  1. Pereira, P.N.A.A.S.; Pinto, A.M.; Campilho, R.D.S.G.. Housing components for autonomous underwater vehicles: design and structural validation. Saarbrücken, Germany: Lambert Publishing. 2022.
    Published
  2. Costa, R.F.R.; Campilho, R.D.S.G.; Silva, F.J.G.. Concept design and product development of a thermoplastic motorbike instrument cluster. Chisinau, Moldova: Eliva Press. 2022.
    Published
  3. Kumar S.K.S.; Campilho, R.D.S.G.; Silva, F.J.G.. Modular jig design approach in the metalworking industry: Case study for process optimization. Saarbrücken, Germany: Lambert Publishing. 2022.
    Published
  4. Swertvaegher G.J.; Campilho, Raul; Silva F.J.G.. Fully-automatic solutions for inspection and packaging in the automotive industry. Saarbrücken, Germany: Lambert Publishing. 2022.
    Published
  5. Vandermeulen V.; Silva F.J.G.; Campilho, Raul. Designing of a novel automatic laser welding equipment for “T”-Profiles. Chisinau, Moldova: Eliva Press. 2022.
    Published
  6. Loureiro, F.J.C.F.B.; Campilho, R.D.S.G.. Mixed-mode behaviour of composite adhesive joints: J-integral approach for fracture evaluation. Saarbrücken, Germany: Lambert Publishing. 2020.
    Published
  7. Carvalho, U.T.F.; Campilho, R.D.S.G.. Modelling adhesive joints by cohesive models using the direct method. Saarbrücken, Germany: Lambert Publishing. 2017.
    Published
  8. Ribeiro, T.E.A.; Campilho, R.D.S.G.. Adhesively-bonded joints in hybrid structures. Saarbrücken, Germany: Lambert Publishing. 2016.
    Published
  9. Rocha, R.J.B.; Campilho, R.D.S.G.. Modelling conditions effect on the cohesive analysis of bonded joints. Saarbrücken, Germany: Lambert Publishing. 2016.
    Published
  10. Campilho, R.D.S.G.. Adhesively-bonded repair techniques for composites and wood: Experimental and Finite Element approaches. Saarbrücken, Germany: Scholars’ Press. 2014.
  11. da Silva, L.F.M.; Campilho, R.D.S.G.. Advances in numerical modelling of adhesive joints. Heidelberg, Germany: Springer. 2012.
    Published
  12. Campilho, R.D.S.G.. Método de Elementos Finitos: Ferramentas para Análise Estrutural. Publindústria. 2012.
    Published
Book chapter
  1. R. J. O. Simões; Raul D. S. G. Campilho; Francisco J. G. Silva; C. Prakash. "Design and Validation of Fixation Points of Polymeric Components for the Automotive Industry". 2024.
    10.1007/978-3-031-38241-3_52
  2. A. F. V. Pedroso; Vitor F. C. Sousa; N. P. V. Sebbe; Francisco J. G. Silva; Raul D. S. G. Campilho; R. C. M. Sales-Contini; F. R. Nogueira. "A Review of INCONEL® Alloy's Non-conventional Machining Processes". 2024.
    10.1007/978-3-031-38241-3_86
  3. J. L. T. A. Pereira; Raul D. S. G. Campilho; Francisco J. G. Silva; I. J. Sánchez-Arce; C. Prakash. "Process Improvement in Zamak Injection Machines for Automotive Component Fabrication". 2024.
    10.1007/978-3-031-38241-3_54
  4. N. P. V. Sebbe; F. Fernandes; Francisco J. G. Silva; Vitor F. C. Sousa; R. C. M. Sales-Contini; Raul D. S. G. Campilho; A. F. V. Pedroso. "Wear Behavior Analysis of TiN/TiAlN Coated Tools in Milling of Inconel 718". 2024.
    10.1007/978-3-031-38241-3_87
  5. Andresa Baptista; Gustavo F. Pinto; Vitor F. C. Sousa; Raul D. S. G. Campilho; Filipe Fernandes. "Studying the Machining Performance of DSS Steel Using Single and Multilayered TiAlSiN Coated Tools Deposited by HiPIMS". 2024.
    10.1007/978-3-031-38241-3_89
  6. Nóbrega JBS; Campilho, Raul. "Evaluation of the peel strength of adhesives by the floating roller peel test". In Contemporary Perspective on Science, Technology and Research. Vol. 3. BP International, 2024.
    Published
  7. André F. V. Pedroso; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; Naiara P. V. Sebbe; Rúben D. F. S. Costa; Marta L. S. Barbosa. "A Study on Spare Parts Management Influencing Factors". 2024.
    10.1007/978-3-031-74482-2_45
  8. A. F. R. Barros; R. D. S. G. Campilho; E. J. C. C. Martins; F. J. G. Silva; C. Rafael. "Stamping Process Improvement of High Yield Stress Steels for the Automotive Industry". 2024.
    10.1007/978-3-031-74485-3_1
  9. J. P. M. Pinto; R. D. S. G. Campilho; F. J. G. Silva; R. P. Martinho. "Development of an Injection Nozzle Heating System for the Production of Automotive Control Cables". 2024.
    10.1007/978-3-031-74485-3_18
  10. A. C. P. Soares; R. D. S. Campilho. "Improvement of the Manufacturing Process of Active Pharmaceutical Ingredients". 2024.
    10.1007/978-3-031-52723-4_2
  11. Francisca Nogueira; André Pedroso; Francisco Silva; Raul Campilho; Rita Sales-Contini. "An Analysis of Machined Surface Quality Using TiAlTaN-Coated Tools in AMPCO® Milling Operations". 2024.
    10.1007/978-3-031-61797-3_33
  12. J. L. T. A. Pereira; R. D. S. G. Campilho; F. J. G. da Silva; I. J. Sánchez-Arce. "Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive Industry". 2023.
    10.1007/978-3-031-13234-6_5
  13. Sánchez-Arce IJ; Ramalho LDC; Gonçalves DC; Campilho, Raul; Belinha J. "Hyperelastic behaviour of adhesives and its effect on bonded joints: An exploratory study". In Proceedings in Engineering Mechanics - Research, Technology and Education. Springer, 2023.
    Published
  14. da Costa JDC; Campilho, Raul. "Proposal of an improved waste collection system for urban environments". In Waste Recovery and Management: An Approach Toward Sustainable Development Goals. CRC Press, Taylor & Francis, 2023.
    Published
  15. Monteiro JPR; Campilho, Raul. "Evaluation of a novel structural adhesive for the automotive industry". In Techniques and Innovation in Engineering Research and Technology Vol. 5. BP International, 2023.
    Published
  16. Viana FAL; Campilho, Raul; Rocha RJB. "Bonded joint strength prediction by the inverse method". In Techniques and Innovation in Engineering Research and Technology Vol. 5. BP International, 2023.
    Published
  17. de Sousa JCM; Campilho, Raul; Silva FJG. "Quality improvement of a tire manufacturing assembly line". In Techniques and Innovation in Engineering Research and Technology Vol. 5. BP International, 2023.
    Published
  18. Peres LMC; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ; Moreira RDF. "Cohesive zone impact analysis of structural adhesive joints". In Versatile Approaches to Engineering and Applied Sciences: Materials and Methods. Özgür Publications, 2023.
    Published
  19. Rosas MMFO; Campilho, Raul; Moreira RDF; Sánchez-Arce IJ; Rocha RJB. "Evaluation of the optimal tubular adhesive joint geometry for structural applications". In Versatile Approaches to Engineering and Applied Sciences: Materials and Methods. Özgür Publications, 2023.
    Published
  20. Neves LFR; Campilho, Raul; Sánchez-Arce IJ. "Mixed-mode fracture analysis of a structural adhesive by contour integral concepts". In Techniques and Innovation in Engineering Research Vol. 7. BP International, 2023.
    Published
  21. Pereira PNAAS; Campilho, Raul; Pinto AMG. "Development of components for autonomous underwater vehicles by design for excellence concepts". In Techniques and Innovation in Engineering Research Vol. 7. BP International, 2023.
    Submitted
  22. Barbosa RCN; Campilho, Raul; Silva FJG. "Numerical development and validation of a polyethylene component injection mold". In Techniques and Innovation in Engineering Research Vol. 7. BP International, 2023.
    Published
  23. Pedroso AFV; Campilho, Raul; Rocha RJB; Gomes MA. "Experimental characterization of self-healing composite structures to low-velocity impact applications". In Advances in engineering and environmental sciences. Özgür Publications, 2023.
    Published
  24. Pereira JPO; Campilho, Raul. "Experimental evaluation of the peel characteristics of structural adhesives". In Research and Developments in Engineering Research Vol. 4. BP International, 2023.
    Published
  25. Kumar SKS; Campilho, Raul; Silva FJG. "Development of a novel jig design to reduce fabrication time of metal parts". In Research and Developments in Engineering Research Vol. 4. BP International, 2023.
    Published
  26. Fernandes RL; Campilho, Raul. "Shear fracture behaviour of bonded joints by application of the direct integration method". In Research and Developments in Engineering Research Vol. 4. BP International, 2023.
    Published
  27. de Oliveira HDBCL; Campilho, Raul; Silva FJG. "Development of an autonomous and compact cargo vehicle for industrial applications". In Research and Developments in Engineering Research Vol. 4. BP International, 2023.
    Published
  28. Lopes JPM; Campilho, Raul. "Calculation approach for the design of adhesive joints under predominant peel". In Research Highlights in Science and Technology Vol. 3. BP International, 2023.
    Published
  29. Gomes LAR; Campilho, Raul; Valente JPA. "Overview on the application of cohesive zone models for impact strength evaluation of adhesive bonded joints". In Research Highlights in Science and Technology Vol. 3. BP International, 2023.
    Published
  30. Lopes JPM; Campilho, Raul; Bellali MA; Baghdadi M. "Adhesive type, geometry, bonding method, and adherend material effects on the strength of adhesively-bonded T-joints". In Research Highlights in Science and Technology Vol. 3. BP International, 2023.
    Published
  31. Silva JESM; Campilho, Raul. "Modelling of bonded tubular scarf joints by the cohesive zone approach". In Research Highlights in Science and Technology Vol. 3. BP International, 2023.
    Published
  32. Oliveira TJS; Campilho, Raul; Kirgiz MS; Kumar MV; Alzein R. "Evaluation of tubular adhesively-bonded joints under torsion". In Research and Developments in Engineering Research Vol. 6. BP International, 2023.
    Published
  33. Pereira PJPD; Campilho, Raul; Kirgiz MS; Kumar MV; Raj JCJ. "Proposal of a soft robotics gripper solution fabricated by additive manufacturing". In Research and Developments in Engineering Research Vol. 6. BP International, 2023.
    Published
  34. Gonçalves LS; Campilho, Raul; Kirgiz MS; Kumar MV; Raj JCJ. "Quality improvement in the automotive components industry by innovative 3D scanner solution". In Research and Developments in Engineering Research. Vol. 7. BP International, 2023.
    Published
  35. Soares ACP; Campilho, Raul; Kirgiz MS; Kumar MV; Alzein R. "Improvement of the manufacturing process of active pharmaceutical ingredients". In Research and Developments in Engineering Research. Vol. 7. BP International, 2023.
    Published
  36. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Strength prediction of adhesively-bonded joints with cohesive laws estimated by digital image correlation". In Applied Computer Engineering. Ponta Grossa, Brazil: Atena Editora, 2022.
    Published
  37. Xará JTS; Campilho, Raul. "Use of advanced numerical methods for the strength prediction of peel-dominated bonded joints". In New Trends in Physical Science Research Vol. 3. BP International, 2022.
    Published
  38. Rocha RJB; Campilho, Raul. "Evaluation of bonded joints by cohesive zone models: a descriptive study". In New Trends in Physical Science Research Vol. 3. BP International, 2022.
    Published
  39. Machado DMSRB; Campilho, Raul. "Insight on the use of cohesive zone models for impact strength analysis of adhesive joints". In Technological Innovation in Engineering Research Vol. 3. BP International, 2022.
    Published
  40. Eusébio SML; Campilho, Raul. "Application of advanced numerical techniques for the analysis of tubular adhesive joints". In Technological Innovation in Engineering Research Vol. 3. BP International, 2022.
    Published
  41. Ferreira JAM; Campilho, Raul. "Evaluation of adhesively-bonded stiffeners by numerical modelling". In Technological Innovation in Engineering Research Vol. 3. BP International, 2022.
    Published
  42. Antunes RPRO; Campilho, Raul. "Tensile cohesive laws of adhesive joints as a function of the adhesive thickness". In Technological Innovation in Engineering Research Vol. 3. BP International, 2022.
    Published
  43. Oliveira TJS; Campilho, Raul; Cardoso MG. "Analysis of torsional tubular adhesive joints using a numerical finite element approach". In Research Aspects in Chemical and Materials Sciences Vol. 1. BP International, 2022.
    Published
  44. Lopes JPM; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ. "Advanced numerical techniques for strength prediction of adhesive joints under peel loadings". In Research Developments in Science and Technology Vol. 7. BP International, 2022.
    Published
  45. Rosas MFMO; Campilho, Raul; Moreira RDF. "Geometric optimization of tubular adhesive joints by cohesive models". In Technological Innovation in Engineering Research Vol. 4. BP International, 2022.
    Published
  46. Moreira FJP; Campilho, Raul. "Advanced numerical techniques to design T-bonded joints". In Technological Innovation in Engineering Research Vol. 4. BP International, 2022.
    Published
  47. Vidal AR; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Re-purposing a welding frame for a tube cutting machine". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering). Springer, 2022.
    Published
  48. Sousa VFC; Silva FJG; Campilho, Raul; Pinto AMG; Fecheira JS. "Study of the influence of laser welding parameters on the weld quality and microstructure of S355JR structural steel". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering). Springer, 2022.
    Published
  49. Sousa VFC; Silva FJG; Pinto AMG; Campilho, Raul; Barbosa M; Costa R. "Milling a titanium alloy using different machining parameters: A comparative study on tool wear, tool life and performance". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering). Springer, 2022.
    Published
  50. Silva FJG; Sousa VFC; Campilho, Raul; Pinto AMG; Fecheira JS. "Optimizing the Ag filler metal content on brazing of Cu-Stainless Steel pipes joints for carbon dioxide refrigeration plants". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering). Springer, 2022.
    Published
  51. Pereira PNAAS; Campilho, Raul; Pinto AMG. "Mechanical design of a wireless charger housing for autonomous underwater vehicles". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI. Iksad Publications, 2022.
    Published
  52. Barros RBP; Campilho, Raul; Sánchez-Arce IJ; Dionísio JMM. "Experimental and numerical assessment of the cracked-lap shear specimen for fracture characterization of structural adhesives". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI. Iksad Publications, 2022.
    Published
  53. Ferreira LRF; Campilho, Raul; Barbosa DR; Rocha RJB; Sánchez-Arce IJ; Moreira RDF. "Numerical modelling of tubular adhesive joints with chamfer modification for the automotive and constructions industries". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI. Iksad Publications, 2022.
    Published
  54. Silva AFMV; Peres LMC; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ; Moreira RDF. "Adaption of the cohesive zone modelling technique for tubular adhesive joint impact analysis". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI. Iksad Publications, 2022.
    Published
  55. Fonseca EMM; Oliveira PN; Campilho, Raul. "Thermal analysis of steel profiles under fire: the lumped capacitance method vs the finite element method". In Mechanics and Materials in Design: Theory, Experiments and Applications in Engineering and Biomechanics. INEGI Publications, 2022.
    Published
  56. Pinheiro AES; Campilho, Raul; Moreira RDF; Sánchez-Arce IJ. "Analytical analysis of tubular adhesive joints". In Technological Innovation in Engineering Research Vol. 7. BP International, 2022.
    Published
  57. Alves DL; Campilho, Raul; Moreira RDF. "Scarf adhesive joints between different adherends by experimental and numerical modelling". In Technological Innovation in Engineering Research Vol. 7. BP International, 2022.
    Published
  58. Silva DFO; Campilho, Raul. "Validation of numerical approach for the analysis of adhesively-bonded scarf joints". In Technological Innovation in Engineering Research Vol. 7. BP International, 2022.
    Published
  59. Ribeiro JPSMB; Campilho, R.D.S.G.; Rocha RJB. "Mixed-mode cohesive properties of a thin adhesive layer". In Current Overview on Science and Technology Research Vol. 1. BP International, 2022.
    Published
  60. Ribeiro JPSMB; Campilho, Raul; Rocha RJB. "Mixed-mode cohesive properties of a thin adhesive layer". In Current Overview on Science and Technology Research Vol. 1. BP International, 2022.
    Published
  61. Barbosa NGC; Campilho, Raul. "Numerical evaluation of different adhesive joint configurations by cohesive zone modelling". In Current Overview on Science and Technology Research Vol. 1. BP International, 2022.
    Published
  62. Silva JESM; Campilho, Raul; Sánchez-Arce IJ; Moreira RDF. "Geometry effect on the tensile behaviour of adhesively-bonded tubular scarf joint". In Current Overview on Science and Technology Research Vol. 2. BP International, 2022.
    Published
  63. Pereira TFC; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ. "Impact analysis of composite adhesive joints by CZM modelling". In Current Overview on Science and Technology Research Vol. 2. BP International, 2022.
    Published
  64. Ramesh V; Campilho, Raul. "Experimental and numerical study on single-lap bonded joints by the extended finite element method". In Current Overview on Science and Technology Research Vol. 2. BP International, 2022.
    Published
  65. Pinto JEC; Campilho, Raul. "Mechanical and fracture property estimation of a structural adhesive". In Techniques and innovation in Engineering Research Vol. 1. BP International, 2022.
    Published
  66. Carvalho PMD; Campilho, Raul; Sánchez-Arce IJ; Rocha RJB; Soares ARF. "A comprehensive experimental study on bi-adhesive technique applied to structural T-joints". In Techniques and innovation in Engineering Research Vol. 1. BP International, 2022.
    Published
  67. Fernandes RL; Campilho, Raul. "Cohesive zone model estimation of the tensile behaviour of adhesive joints". In Techniques and Innovation in Engineering Research Vol. 3. BP International, 2022.
    Published
  68. Fernandes TAB; Campilho RDSG. "Numerical evaluation of single-lap adhesive joints under different geometries and adhesive types". In Techniques and Innovation in Engineering Research Vol. 3. BP International, 2022.
    Published
  69. Sánchez-Arce, I. J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Development of an elasto-plastic meshless technique to analyse bonded structures". In Industrial Applications of Adhesives. Heidelberg, Germany: Springer, 2021.
    Published
  70. Ramalho, L.D.C.; Campilho, Raul; Sánchez-Arce, I. J.; Belinha, J.. "Using a meshless method to predict the strength of adhesive single lap joints". In Encyclopedia of Materials: Composites, edited by Brabazon, D.. Amsterdão: Elsevier, 2021.
    Published
  71. Ramalho LDC; Dionísio JMM; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Intensity of singular stress fields in single lap joints using the radial point interpolation method". In Proceedings of DCE21, 4th Doctoral Congress in Engineering. FEUP Edições, 2021.
    Published
  72. Gonçalves DC; Belinha J; Campilho, Raul. "Topology optimization using a bi-directional evolutionary algorithm combined with the NNRPIM". In Proceedings of DCE21, 4th Doctoral Congress in Engineering. FEUP Edições, 2021.
    Published
  73. I. J. Sánchez-Arce; L. D. C. Ramalho; R. D. S. G. Campilho; J. Belinha. "Development of an Elasto-plastic Meshless Technique to Analyse Bonded Structures". 2021.
    10.1007/978-981-15-6767-4_4
  74. Leal, A.J.S.; Campilho, R.D.S.G.. "Experimental shear fracture characterization of adhesively-bonded joints". In Innovation, Engineering and Entrepreneurship. Heidelberg, Germany: Springer, 2019.
    Published
  75. Nunes, F.A.A.; Campilho, R.D.S.G.. "Evaluation of mixed-mode fracture in adhesively-bonded joints". In Innovation, Engineering and Entrepreneurship. Heidelberg, Germany: Springer, 2019.
    Published
  76. de Sousa Marques, Eduardo André; Akhavan-Safar, Alireza; Campilho, Raul Duarte Salgueiral Gomes; Carbas, Ricardo João Camilo; da Silva, Lucas Filipe Martins. "Advanced Numerical Models for Predicting the Load and Environmentally Dependent Behaviour of Adhesives and Adhesively Bonded Joints". In State of the Art and Future Trends in Material Modeling, 211-244. Springer International Publishing, 2019.
    10.1007/978-3-030-30355-6_10
  77. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Strength prediction of adhesively-bonded joints with cohesive laws estimated by the direct method". In Estudos (Inter)Multidisciplinares nas Ciências Exatas e Tecnologias. Ponta Grossa, Brazil: Atena Editora, 2019.
    Published
  78. Cardoso MG; Campilho, Raul. "Adherend material effect on the tensile strength on adhesive bonded tubular joints". In Proceedings of DCE19, 3rd Doctoral Congress in Engineering. FEUP Edições, 2019.
    Published
  79. Ramalho LDC; Campilho, Raul; Belinha JAOP. "Using radial point interpolation meshless methods to analyse adhesive single-lap joints". In Proceedings of DCE19, 3rd Doctoral Congress in Engineering. FEUP Edições, 2019.
    Published
  80. Campilho, R.D.S.G.; da Silva, L.F.M.; Banea, M.D.. "Adhesive Bonding of Polymer Composites to Lightweight Metals". In Joining of Polymer-Metal Hybrid Structures: Principles and Applications. New Jersey, United States: Wiley, 2018.
    Published
  81. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Principles of Adhesive Bonding". In Joining of Polymer-Metal Hybrid Structures: Principles and Applications. New Jersey, United States: Wiley, 2018.
    Published
  82. da Silva, L.F.M.; Marques, E.A.S.; Campilho, R.D.S.G.. "Design rules and methods to improve joint strength". In Handbook of Adhesion Technology. Heidelberg, Germany: Springer, 2018.
    Published
  83. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.; Silva, F.J.G.. "Modelling stepped-lap adhesive joints by the extended finite element method". In Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0. Amsterdão, Netherlands: IOS Press, 2018.
    Published
  84. Ferreira, L.R.F.; Campilho, R.D.S.G.; Barbosa, D.R.. "Geometrical optimization of axially loaded tubular adhesive joints by finite elements". In Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0. Amsterdão, Netherlands: IOS Press, 2018.
    Published
  85. Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Pereira, M.T.. "Establishing guidelines to improve the high-pressure die casting process of complex aesthetics parts". In Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0. Amsterdão, Netherlands: IOS Press, 2018.
    Published
  86. Viana FAL; Campilho, Raul; Rocha RJB. "Fracture modelling of adhesively-bonded joints by an inverse method". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture. Edições UBI, 2018.
    Published
  87. Ribeiro JPSMB; Campilho, Raul; Rocha RJB. "Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture. Edições UBI, 2018.
    Published
  88. Machado RMD; Campilho, Raul; Rocha RJB. "Design of step bonded joints by the eXtended Finite Element Method". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture. Edições UBI, 2018.
    Published
  89. Costa M; Viana, G; da Silva LFM; Campilho, Raul. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture. Edições UBI, 2018.
    Published
  90. Moreira FJP; Campilho, Raul. "Numerical analysis of bonded joints by the extended finite element method". In New Trends in Fatigue and Fracture. Ed. IDMEC, 2018.
    Published
  91. Nunes FAA; Campilho, Raul. "Asymmetric tapered double-cantilever beam specimen to predict mixed-mode fracture of structural adhesives". In New Trends in Fatigue and Fracture. Ed. IDMEC, 2018.
    Published
  92. Nunes FAA; Campilho, Raul. "Mixed-mode fracture of bonded joints using the asymmetric tapered double-cantilever beam test". In Integrity/Reliability/Failure in Automotive, locomotive, Aerospace, Civil Engineering and Biomechanics. Edições INEGI, 2018.
    Published
  93. Machado RMD; Campilho, Raul. "Advanced numerical techniques applied to the strength prediction of stepped-lap adhesive joints". In Integrity/Reliability/Failure in Automotive, locomotive, Aerospace, Civil Engineering and Biomechanics. Edições INEGI, 2018.
    Published
  94. Campilho, R.D.S.G.. "Introduction". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  95. da Silva, L.F.M.; Costa, M.; Viana, G.; Campilho, R.D.S.G.. "Analytical modelling for the single-lap joint". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  96. Campilho, R.D.S.G.. "Cohesive Zone Modelling for static applications". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  97. Campilho, R.D.S.G.; Costa, M.; Viana, G.; da Silva, L.F.M.. "Parameter identification in Cohesive Zone Modelling". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  98. Campilho, R.D.S.G.; Fernandes, T.A.B.. "Extended Finite Element modelling in static applications". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  99. Campilho, R.D.S.G.; Moreira, R.D.F.. "Numerical modelling of bonded joints and repairs". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  100. Marques, E.A.S.; Campilho, R.D.S.G.; Flaviani, M.; da Silva, L.F.M.. "Mixed adhesive joints for the aerospace industry". In Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
    Published
  101. Campilho, R.D.S.G.. "Recent innovations in biocomposite products". In Biocomposites for high-performance applications: Current barriers and future needs towards industrial development. United Kingdom: Woodhead Publishing, 2017.
    Published
  102. Rocha RJB; Campilho, Raul; Silva FJG. "Comparison of different modelling conditions in the strength prediction of bonded joints by cohesive models". In Business Sustainability VI. 2100 Projects Association, 2017.
    Published
  103. Pinto LCM; Silva FJG; Campilho, Raul; Ferreira LP. "Lean manufacturing applied to the steel belt cutting in tire manufacturing". In Business Sustainability VI. 2100 Projects Association, 2017.
    Published
  104. Alves DL; Campilho, R.D.S.G.; Moreira RDF; Silva FJG. "Scarf bonded joints between different adherends". In Business Sustainability VI. 2100 Projects Association, 2017.
    Published
  105. Costa M; Viana G; da Silva LFM; Campilho, Raul. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". In Proceedings of DCE17, 2nd Doctoral Congress in Engineering. FEUP Edições, 2017.
    Published
  106. Silva JOS; Campilho, Raul. "Experimental and cohesive zone modelling analysis of adhesively-bonded stepped joints". In Progress in Mechanics and Materials in Design. Edições INEGI, 2017.
    Published
  107. Alves DL; Campilho, Raul; Moreira RDF. "Hybrid adhesively-bonded scarf joints: Experimentation and cohesive zone simulations". In Progress in Mechanics and Materials in Design. Edições INEGI, 2017.
    Published
  108. Campilho, R.D.S.G.. "Introduction". In Natural fibre composites. Boca Raton, United States: CRC Press, Taylor & Francis, 2016.
    Published
  109. Campilho, R.D.S.G.; da Silva, L.F.M.. "Joint design in natural fibre composites". In Natural fibre composites. Boca Raton, United States: CRC Press, Taylor & Francis, 2016.
    Published
  110. Santos MAS; Campilho, Raul. "Numerical evaluation of the mixed-mode fracture of composite bonded joints". In New Trends on Integrity, Reliability and Failure. Edições INEGI, 2016.
    Published
  111. Marques GP; Campilho, Raul; da Silva FJG. "Experimental and numerical analysis of adhesively bonded-welded hybrid single-lap joints: Effect of the adhesive type". In New Trends on Integrity, Reliability and Failure. Edições INEGI, 2016.
    Published
  112. Costa R; da Silva FJG; Campilho, Raul. "A novel concept of agile assembly machine for housings of motor widescreen wipers". In New Trends on Integrity, Reliability and Failure. Edições INEGI, 2016.
    Published
  113. Moreira BMDN; da Silva FJG; Campilho, Raul. "Process integration through automated sub-assembly line". In New Trends on Integrity, Reliability and Failure. Edições INEGI, 2016.
    Published
  114. Costa M; Viana G; da Silva LFM; Campilho, Raul. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". In Proceedings of EURADH 2016, 11th European Adhesion Conference. IOM Communications, 2016.
    Published
  115. Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode I fatigue and fracture behavior of carbon fibre reinforced polymer (CFRP) composite joints (Chapter 4)". In Fatigue and fracture of adhesively bonded composite joints: Behaviour, simulation and modeling. Woodhead Publishing, 2015.
    Published
  116. da Silva, L.F.M.; Campilho, R.D.S.G.. "Design of adhesively-bonded composite joints (Chapter 2)". In Fatigue and fracture of adhesively bonded composite joints: Behaviour, simulation and modeling. Woodhead Publishing, 2015.
    Published
  117. Costa M; Viana G; da Silva LFM; Campilho, Raul. "Humidity effects on the fatigue behaviour of adhesively bonded aluminium DCB joints". In Proceedings of DCE 2015, 1st Doctoral Congress in Engineering. FEUP Edições, 2015.
    Published
  118. Araújo L; Silva FJG; Campilho, Raul. "Adding value to metal shear machines through innovative tools". In Business Sustainability IV. 2100 Projects Association, 2015.
    Published
  119. Ferreira A; Silva FJG; Campilho, Raul. "Developing innovative tool holder systems for press-brake machines". In Business Sustainability IV. 2100 Projects Association, 2015.
    Published
  120. Luís JB; Silva FJG; Campilho, Raul. "Door glass lifting mechanical devices: from manual to fully-automated assembly line". In Business Sustainability IV. 2100 Projects Association, 2015.
    Published
  121. Araújo W; Silva FJG; Campilho, Raul; Matos J. "Improving the competitiveness of a suspension mat production line". In Business Sustainability IV. 2100 Projects Association, 2015.
    Published
  122. Matos JA; Silva FJG; Campilho, Raul; Soares M. "Lean-manufacturing applied to a machining cell". In Business Sustainability IV. 2100 Projects Association, 2015.
    Published
  123. Campilho, Raul; Banea MD; da Silva LFM. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". In Proceedings of PCF 2014, XIII Portuguese Conference on Fracture. UTAD Edições, 2014.
    Published
  124. Banea MD; da Silva LFM; Campilho, R.D.S.G.. "Effects of adhesive thickness on the fracture of polyurethane adhesive joints". In Proceedings of PCF 2014, XIII Portuguese Conference on Fracture. UTAD Edições, 2014.
    Published
  125. Banea MD; da Silva LFM; Carbas, RJC; Campilho, Raul. "Characterization of a structural polyurethane adhesive modified with thermally expandable particles". In Proceedings of EURADH 2014, 10th European Adhesion Conference. IOM Communications, 2014.
    Published
  126. Banea MD; da Silva LFM; Campilho, Raul. "Effect of adhesive thickness on mode I fracture toughness of a structural polyurethane adhesive for automotive applications". In Tendencias en Adhesion y Adhesivos, Volumen VI. AIMEN Technology Centre, 2013.
    Published
  127. Campilho, R.D.S.G.. "End-Notched Flexure". In Best Practices in Preparing and Testing Adhesive Joints. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co, 2012.
    Published
  128. Campilho, Raul; Banea MD; da Silva LFM. "Experimental and Finite Element design of single-lap joints by adhesive-bonding, welding and hybrid joining". In Proceedings of YIC 2012, 1st European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference. UA Editions, 2012.
    Published
  129. Campilho, Raul; Banea MD; da Silva LFM. "Numerical modelling of adhesively-bonded joints: effect of the cohesive zone model parameters". In Proceedings of PCF 2012, XIII Portuguese Conference on Fracture. Nozzle, 2012.
    Published
  130. Campilho, Raul; Pinto AMG; Banea MD. "Modelling of composite bonded joints by the extended finite element method". In Proceedings of PCF 2012, XIII Portuguese Conference on Fracture. Nozzle, 2012.
    Published
  131. Banea MD; da Silva LFM; Campilho, Raul. "Fracture tests of adhesive joints bonded with a high temperature epoxy adhesive". In Proceedings of PCF 2012, XIII Portuguese Conference on Fracture. Nozzle, 2012.
    Published
  132. Campilho, Raul; Afonso PFP; Banea MD; da Silva LFM. "Experimental optimization of single-lap and T-peel joints by bonding, welding and hybrid joining". In Experimental Mechanics: New Trends and Perspectives. Edições INEGI, 2012.
    Published
  133. Ribeiro NFQR; Campilho, Raul; Pinto AMG. "Optimization of single-lap joints by slotting and chamfering the adherends at the overlap". In Experimental Mechanics: New Trends and Perspectives. Edições INEGI, 2012.
    Published
  134. Campilho, Raul. "Fibre-reinforced composite materials: an improvement in sustainability". In Business Sustainability II. UMinho Editions, 2011.
    Published
  135. Campilho, Raul; Banea MD; da Silva LFM. "Influência dos parâmetros coesivos na previsão de resistência de juntas adesivas". In Proceedings of CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica. FEUP Edições, 2011.
  136. Campilho, Raul; Pinto AMG; Neto JABP; Banea MD; da Silva LFM. "Análise experimental e por elementos finitos de juntas de sobreposição simples híbridas (soldadas/adesivas)". In Proceedings of CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica. FEUP Edições, 2011.
    Published
  137. Campilho, Raul. "Taper angle optimization of scarf repairs in carbon-epoxy laminates". In Proceedings of CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010. Engebook, 2010.
    Published
  138. Pinto AMG; Campilho, Raul; Mendes IR; Durão LMP; Silva RF; Baptista APM. "Tensile behaviour of single and double-strap repairs on aluminium structures". In Proceedings of CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010. Engebook, 2010.
    Published
  139. Banea MD; da Silva LFM; Campilho, Raul. "Mode I fracture toughness of adhesively bonded joints in a high temperature environment". In Proceedings of CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010. Engebook, 2010.
    Published
  140. Campilho, Raul; Banea MD; Pinto AMG; da Silva LFM. "Determinação da lei coesiva em modo I de uma junta colada de compósito de carbono-epóxido pelo método dos elementos finitos extendido". In Proceedings of ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas. FEUP Edições, 2010.
    Published
  141. Campilho, Raul; Banea MD; Pinto AMG; da Silva LFM. "Reparação de vigas de madeira com laminados de compósito de carbono-epóxido". In Proceedings of ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas. FEUP Edições, 2010.
    Published
  142. Pinto AMG; Magalhães AG; Campilho, Raul; Baptista APM. "Ligação adesiva de polietileno e materiais compósitos". In Proceedings of ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas. FEUP Edições, 2010.
    Published
  143. Ramantani DA; Campilho, Raul. "Modelling adhesive bonded repairs on sandwich structures with the use of cohesive mixed-mode damage models". In Proceedings of Composites2009, 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites. ECCOMAS, 2009.
    Published
  144. Campilho, Raul. "Strength prediction of adhesively-bonded repairs on carbon-epoxy laminates by the single and double-strap techniques". In Integrity, Reliability and Failure: Challenges and Opportunities. Edições INEGI, 2009.
    Published
  145. Pinto AMG; Campilho, Raul. "Effect of plug filling, testing velocity and temperature on the tensile strength of single and double-strap repairs on aluminium structures". In Integrity, Reliability and Failure: Challenges and Opportunities. Edições INEGI, 2009.
    Published
  146. Campilho, Raul. "Reparação de vigas de madeira danificadas por esmagamento com compósitos de carbono-epóxido". In Proceedings of JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia. Publindústria, 2009.
    Published
  147. Campilho, R.D.S.G.. "Optimização da geometria de reparações adesivas por sobreposição simples em materiais compósitos". In Proceedings of JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia. Publindústria, 2009.
  148. Pinto AMG; Magalhães AG; Campilho, Raul; Baptista APM. "Determinação experimental da resistência ao corte de juntas adesivas por sobreposição simples com substratos de polietileno e polipropileno". In Proceedings of JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia. Publindústria, 2009.
    Published
  149. Pinto AMG; Magalhães AG; Campilho, Raul; Silva LFM; Baptista APM. "Determinação experimental da taxa crítica de libertação de energia em modo I de um adesivo acrílico pelo ensaio Double Cantilever Beam (DCB)". In Proceedings of JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia. Publindústria, 2009.
    Published
  150. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Ramantani, D.A.; Marques, A.T.. "Repair of composites and sandwich structures". In Advanced School on Sandwich Structures. Porto, Portugal: FEUP, 2008.
    Published
  151. Ramantani DA; Campilho, Raul. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". In Proceedings of 8th International Conference on Sandwich Structures (ICSS 8). FEUP Edições, 2008.
    Published
  152. Ramantani DA; Campilho, Raul. "Cohesive mixed-mode damage model applied to the simulation of the mechanical behaviour of a repaired sandwich beam". In Proceedings of 13th European Conference on Composite Materials. ECCM13 book, 2008.
    Published
  153. Campilho, Raul. "Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method". In Proceedings of PCF 2008 - 11th Portuguese Conference on Fracture. FCT/UNL Publications, 2008.
    Published
  154. Ramantani DA; Campilho, Raul. "Numerical simulation of the mechanical behavior of a repaired sandwich beam using a cohesive damage model". In Proceedings of PCF 2008 - 11th Portuguese Conference on Fracture. FCT/UNL Publications, 2008.
    Published
  155. Pinto AMG; Magalhães AG; Campilho, Raul. "Adhesively bonded single-lap joints between polyethylene and other materials. Numerical analysis and experimental results". In Proceedings of PCF 2008 - 11th Portuguese Conference on Fracture. FCT/UNL Publications, 2008.
    Published
  156. Campilho, Raul. "Reparações em materiais compósitos". In A Engenharia no Combate à Pobreza: Pelo Desenvolvimento e Competitividade. Edições INEGI, 2008.
    Published
  157. Campilho, Raul. "Aplicação de modelos coesivos para a determinação da resistência mecânica de juntas coladas". In A Engenharia no Combate à Pobreza: Pelo Desenvolvimento e Competitividade. Edições INEGI, 2008.
    Published
  158. Ramantani DA; Nóvoa PJRO; Campilho, Raul. "A finite element and experimental study of composite tubular joints". In Proceedings of Materiais 2007, IV International Materials Symposium | XIII Portuguese Materials Society Meeting. FEUP Edições, 2007.
    Published
  159. Campilho, R.D.S.G.. "Damage Initiation and Growth in Single and Double-Lap Repairs on CFRP Composite Joints with Different Configurations". In Proceedings of Materiais 2005, III International Materials Symposium | XII Portuguese Materials Society Meeting. 2005.
    Published
  160. Campilho, Raul. "Modelação da execução de reparações em materiais compósitos". In Proceedings of JPE2004, 4ªs Jornadas Mecânica, Automóvel, Organização e Gestão Industrial, Energia e Ambiente. Porto, Portugal: Publindústria, 2004.
    Published
  161. Campilho, Raul. "Autocarro com capacidade de transporte de passageiros incapacitados dos membros inferiores". In Proceedings of 3ªs Jornadas Politécnicas de Engenharia. Coimbra, Portugal: Edições ISEC, 2003.
    Published
Conference paper
  1. Lopes JPM; Campilho, Raul; Rocha RJB. "Numerical evaluation of the adhesive effect on the peel strength of aluminium T-joints". Paper presented in IGF27, 27th International Conference on Fracture and Structural Integrity, 2023.
    Published
  2. Gomes LAR; Campilho, Raul; Valente JPA. "Parametric analysis of double-lap composite adhesive joints under impact loads". Paper presented in IGF27, 27th International Conference on Fracture and Structural Integrity, 2023.
    Published
  3. Silva JESM; Campilho, R.D.S.G.; Sánchez-Arce IJ; Moreira RDF. "Effect of adhesive type on the tensile behaviour of tubular scarf adhesive joints". Paper presented in IGF27, 27th International Conference on Fracture and Structural Integrity, 2023.
    Published
  4. Nóbrega JBS; Campilho, Raul; Sánchez-Arce IJ; Moreira RDF. "Numerical estimation of peel strength of adhesive joints via the floating roller peel test". Paper presented in IGF27, 27th International Conference on Fracture and Structural Integrity, 2023.
    Published
  5. Soares ACP; Campilho, Raul. "Improvement of the manufactirung process of active pharmaceutical ingredients". Paper presented in ICQIS2023, 4th International Conference on Quality, Innovation and Sustainability, 2023.
    Published
  6. Ramalho PMS; Campilho, Raul; Silva FJG. "Productivity improvement of control cable manufacturing equipment for the automotive industry". Paper presented in ICQIS2023, 4th International Conference on Quality, Innovation and Sustainability, 2023.
    Published
  7. Ramalho LDC; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Radial point interpolation methods in a structural dynamic analysis". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  8. Gonçalves DC; Sánchez-Arce IJ; Ramalho LDC; Campilho, Raul; Belinha J. "Meshless analysis of fracture propagation in DCB adhesive joints". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  9. Pedroso AFV; Campilho, Raul; Rocha RJB; Gomes MA. "Experimental characterization of self-healing composite structures to low and high-velocity impact applications". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  10. Pedroso AFV; Campilho, Raul; Silva FJG; Rocha RJB. "Low and high-velocity impact evaluation of self-regenerating sandwich structures by FEM". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  11. Pedroso AFV; Sousa VFC; Sebbe NPV; Silva FJG; Campilho, Raul; Sales-Contini RCM; Nogueira FR. "An extended comprehensive review of INCONEL® alloy’s non-conventional machining processes". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  12. Nogueira FR; Pedroso AFV; Sousa VFC; Sebbe NPV; Silva FJG; Campilho, Raul; Sales-Contini RCM; Jesus AMP. "A review of injection-mould materials and their conventional and non-conventional machining processes". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  13. Araújo P; Campilho, Raul; Machado J; Rocha RJB. "Compaction analysis in composite material processing by the vacuum infusion process". Paper presented in DCE23, 5th Doctoral Congress in Engineering, 2023.
    Published
  14. Campilho, Raul. "Advanced numerical techniques for static strength prediction of adhesively-bonded composite joints". Paper presented in ICMSN2023, International Conference on Materials Science and Nanotechnology, 2023.
    Published
  15. Simões RJO; Campilho, Raul; Silva FJG; Prakash C. "Design and validation of fixation points of polymeric components for the automotive industry". Paper presented in FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing, 2023.
    Published
  16. Pereira JL; Campilho, Raul; Silva FJG; Sánchez-Arce IJ; Prakash C. "Process improvement in Zamak injection machines for automotive component fabrication". Paper presented in FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing, 2023.
    Published
  17. Pedroso AFV; Sousa VFC; Sebbe NPV; Silva FJG; Campilho, Raul; Sales-Contini RCM; de Nogueira FR. "A review of INCONEL® alloy's non-conventional machining processes". Paper presented in FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing, 2023.
    Published
  18. Sebbe NPV; Fernandes F; Silva FJG; Sousa VFC; Sales-Contini RCM; Campilho, Raul; Pedroso AFV. "Wear behavior analysis of TiN/TiAlN coated tools in milling of Inconel 718". Paper presented in FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing, 2023.
    Published
  19. Baptista A; Pinto G; Sousa V; Campilho, Raul; Fernandes F. "Studying the machining performance of single and multi-layered TiAlSiN coated tools deposited by HiPIMS". Paper presented in FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing, 2023.
    Published
  20. Gonçalves DC; Sánchez-Arce IJ; Ramalho LDC; Campilho, Raul; Belinha J. "Simulation of mode II fracture propagation in adhesive joints using a meshless technique". Paper presented in ICCS26, 26th International Conference on Composite Structures, 2023.
    Published
  21. Ramalho LDC; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Structural dynamic analysis of an adhesive joint". Paper presented in ICCS26, 26th International Conference on Composite Structures, 2023.
    Published
  22. Pereira PJPD; Campilho, Raul; Prakash C. "Design and validation of gripper solution using soft robotics principles". Paper presented in MESIC2023, Manufacturing Engineering Society International Conference, 2023.
    Published
  23. Gonçalves LS; Campilho, Raul; Prakash C. "Development of quality assurance system in the automotive industry". Paper presented in MESIC2023, Manufacturing Engineering Society International Conference, 2023.
    Published
  24. Carvalho DFT; Campilho, Raul; Vargas AS; Moreira RDF; Madani K. "Parametric cohesive zone analysis of bi-adhesive single-step joints". Paper presented in AB2023, 7th International Conference on Structural Adhesive Bonding, 2023.
    Published
  25. Gomes LAR; Campilho, Raul; Valente JPA; Queirós MJR; Madani K. "Impact loading analysis of double-lap composite bonded joints". Paper presented in AB2023, 7th International Conference on Structural Adhesive Bonding, 2023.
    Published
  26. Ramalho LDC; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Impact analysis of an adhesive joint using a meshless method". Paper presented in ICSI2023, 5th International Conference on Structural Integrity, 2023.
    Published
  27. Carvalho DFT; Campilho, Raul; Ramalho LDC; Moreira RDF; Madani K. "Application of the dual-adhesive technique for static improvement of single step joints". Paper presented in ICSI2023, 5th International Conference on Structural Integrity, 2023.
    Published
  28. Araújo IRF; Pinheiro GJC; Rocha RJB; Campilho, Raul; Ramalho LDC; Madani K. "eXtended Finite Element Method applied to the tensile strength evaluation of scarf adhesive joints". Paper presented in ICSI2023, 5th International Conference on Structural Integrity, 2023.
    Published
  29. Ramalho PMS; Campilho, Raul; Silva FJG; Pedroso AFV; Sales-Contini RCM. "Productivity improvement of control cable manufacturing equipment for the automotive industry". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  30. Curralo PMP; Campilho, Raul; Pereira JAP; Silva FJG; Pedroso AFV; Sales-Contini RCM. "Design of a connector assembly equipment for the automotive industry". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  31. Tavares DO; Sousa VFC; Campilho, Raul; Silva FJG; Pedroso AFV. "Design and sizing of an automatic wire feeding welding machine". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  32. Gaspar M; Silva FJG; Campilho, Raul; Pedroso AFV; Sebbe NPV; Sales-Contini RCM. "2D and 3D wires formability for car seats: A novel full-automatic equipment concept towards high productivity and flexibility". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  33. Eiras E; Silva FJG; Campilho, Raul; Pedroso AFV; Sebbe NPV; Sales-Contini RCM. "A novel full-automatic concept to produce Bowden cables first subset improving productivity, flexibility, and safety". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  34. Sousa VFC; Silva FJG; Campilho, Raul; Sales-Contini RCM; Pedroso AFV; Sebbe NPV; Moreira J. "A new model for increasing economic and environmental sustainability in cutting abrasive discs from rectangular shapes". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  35. Sales-Contini RCM; Costa JP; Silva FJG; Pinto AG; Pinto IM; campi. "Influence of laser marking parameters in the DMC code on the quality of PBT/glass fibre composite surface analysed by SEM". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  36. Pedroso AFV; Silva FJG; Campilho, Raul; Sales-Contini RCM; Moreira RR. "Computer application for electric network management of an industrial company". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  37. Lemos HMB; Campilho RDSG; Silva FJG; Martinho RP; Pedroso AFV. "Lifespan increase of electrical terminal crimping tools for the automotive industry". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  38. Sales-Contini RCM; Pinto H; Silva FJG; Campilho, Raul. "Die casting thermal diffusion study through the Natti Gunter process". Paper presented in MD2023, International Conference on Machine Design, 2023.
    Published
  39. Pinheiro GJC; Araújo IRS; Campilho, Raul; Valente JPA; Queirós MJR; Madani K. "Study of different initiation and propagation criteria in the XFEM modelling of scarf adhesive joints". Paper presented in IWPDF2023, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, 2023.
    Published
  40. Santos JCM; Campilho, Raul; Moreira RDF; Madani K. "Cohesive zone evaluation of different design solutions for adhesive joints in canoeing boats". Paper presented in IWPDF2023, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, 2023.
    Published
  41. Campilho, Raul. "Numerical modelling of composite bonded joints and sandwich structures under impact loads". Paper presented in PCM2023, 10th Global Conference on Polymer and Composite Materials, 2023.
    Published
  42. Ramalho LDC; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Structural analysis of adhesive joints using meshless methods". Paper presented in CILAMCE2023, The XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023.
    Published
  43. Campilho, Raul. "Numerical dynamic fracture modelling of advanced composite structures". Paper presented in GSEAME2023, 3rd Global Summit and Expo on Aerospace and Mechanical Engineering, 2023.
    Published
  44. Pedroso AFV; Sousa VFC; Sebbe NPV; Silva FJG; Campilho, Raul; Sales-Contini RCM; Jesus AMP. "A brief review of INCONEL® alloys numerical analysis on traditional machining predictability". Paper presented in ISM 2023, International Conference on Industry 4.0 and Smart Manufacturing, 2023.
    Published
  45. Pereira, T.F.C.; Campilho, R.D.S.G.; Rocha, R.J.B.; Sánchez-Arce, I.J.. "Cohesive zone parameter influence on the impact strength of steel adhesive joints". Paper presented in MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity, Catania, 2022.
    Published
  46. Carvalho, P.M.D.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Rocha, R.J.B.; Soares, A.R.F.. "Adhesively-bonded T-joint cohesive zone analysis using dual-adhesives". Paper presented in MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity, Catania, 2022.
    Published
  47. Silva, J.E.S.M.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Moreira, R.D.F.. "Numerical evaluation of tensile-loaded tubular scarf adhesive joints". Paper presented in MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity, Catania, 2022.
    Published
  48. Soares, A.R.F.; Campilho, R.D.S.G.; Chaves, F.J.P.; Sánchez-Arce, I.J.; Fecheira, J.M.F.S.; Silva, F.J.G.; Carvalho, P.M.D.. "Design and validation of mixed-mode device for fracture toughness analysis of adhesive joints". Paper presented in MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity, Catania, 2022.
    Published
  49. Pinheiro, A.E.S.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I.J.. "Validation of theoretical models for the strength prediction of tubular adhesive joints". Paper presented in MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity, Catania, 2022.
    Published
  50. Oliveira, T.J.S.; Campilho, R.D.S.G.; Cardoso, M.G.; Sánchez-Arce, I.J.. "Cohesive zone analysis of torsional tubular joints with an epoxy adhesive". Paper presented in MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity, Catania, 2022.
    Published
  51. Ferreira PAR; Campilho, Raul; Sánchez-Arce IJ; Gonçalves DC. "Static strength prediction of curved composite joints under internal pressure". Paper presented in IAA2022, 2nd International Conference on Industrial Applications of Adhesives, 2022.
    Published
  52. Sánchez-Arce IJ; Ramalho LDC; Gonçalves DC; Campilho, Raul; Belinha J. "Hyperelastic behaviour of adhesives and its Effect on bonded joints". Paper presented in IAA2022, 2nd International Conference on Industrial Applications of Adhesives, 2022.
    Published
  53. Silva FJG; Sousa VFC; Campilho, Raul; Alexandre R. "Investigations on the wear performance of coated tools in machining UNS S32101 duplex stainless steel". Paper presented in Materiais 2022, XI International Materials Symposium | XX Portuguese Materials Society Meeting, 2022.
    Published
  54. Pereira JLTA; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Die casting process improvement in automotive bowden cable manufacture". Paper presented in ICQIS2022, 3rd International Conference on Quality, Innovation and Sustainability, 2022.
    Published
  55. Barbosa AFG; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Process improvement in the fabrication of spiral cables for the automotive industry". Paper presented in ICQIS2022, 3rd International Conference on Quality, Innovation and Sustainability, 2022.
    Published
  56. Barbosa AFG; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Design of a spiral double-cutting machine for an automotive bowden cable assembly line". Paper presented in EM2022, 1st International Conference on Engineering Manufacture, 2022.
    Published
  57. Pereira JLTA; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Improving the efficiency of the bowden cable terminal injection process for the automotive industry". Paper presented in EM2022, 1st International Conference on Engineering Manufacture, 2022.
    Published
  58. Santos V; Sousa VFC; Silva FJG; Matias JCO; Costa RDFS; Pinto AMG; Campilho, Raul. "SMED applied to tire calibration procedures". Paper presented in EM2022, 1st International Conference on Engineering Manufacture, 2022.
    Published
  59. Amaral I; Sousa VFC; Costa RDFS; Silva FJG; Campilho, Raul; Pinto AMG. "Improving the cut surface quality by optimizing parameters in the fibre laser cutting process". Paper presented in EM2022, 1st International Conference on Engineering Manufacture, 2022.
    Published
  60. Costa RDFS; Sousa VFC; Silva FJG; Campilho, Raul; Pinto AMG; Soares RPC. "A novel robotic manipulator concept for managing the winding and extraction of wire coils". Paper presented in EM2022, 1st International Conference on Engineering Manufacture, 2022.
    Published
  61. Costa RDFS; Sousa VFC; Silva FJG; Campilho, Raul; Pinto AMG; Pereira JPJ. "Increasing the sustainability of manufacturing processes in plastic injection: recovering out-of-service robots to eliminate manual assembly operations". Paper presented in EM2022, 1st International Conference on Engineering Manufacture, 2022.
    Published
  62. Vieira JMM; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Development of a rotation and lifting system for pallet rotary tables". Paper presented in FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing, 2022.
    Published
  63. Vidal AR; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Adaptation of a welding frame for a tube cutting machine". Paper presented in FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing, 2022.
    Published
  64. Sousa VFC; Silva FJG; Pinto A; Campilho, Raul; Barbosa M; Costa R. "Milling a titanium alloy using different machining strategies: A comparative study on tool wear, tool life and performance". Paper presented in FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing, 2022.
    Published
  65. Sousa VFC; Silva FJG; Campilho, Raul; Pinto A; Fecheira JS. "Optimizing the Ag filler metal content on TIG welding of Cu-Cu and Cu-Steel pipes joints for carbon dioxide refrigeration plants". Paper presented in FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing, 2022.
    Published
  66. Sousa VFC; Silva FJG; Campilho, Raul; Pinto A; Fecheira JS. "Study of the influence of laser welding parameters on the weld quality and microstructure of S355 structural steel". Paper presented in FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing, 2022.
    Published
  67. Fonseca EMM; Oliveira PN; Campilho, Raul. "Thermal analysis of steel profiles under fire: the lumped capacitance method vs the finite element method". Paper presented in M2D2022, 9th International Conference on Mechanics and Materials in Design, 2022.
    Published
  68. Lopes JPM; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ. "Adhesive type Effect on adhesively-bonded aluminium T-joints". Paper presented in MDA 2022, 4th International Conference on Materials Design and Applications, 2022.
    Published
  69. Barros RBP; Campilho, Raul; Sánchez-Arce IJ; Dionisio JMM. "Evaluation of the CLS test for mixed-mode fracture toughness estimation of adhesive joints". Paper presented in MDA 2022, 4th International Conference on Materials Design and Applications, 2022.
    Published
  70. Gonçalves DC; Sánchez-Arce IJ; Ramalho LDC; Campilho, Raul; Belinha J. "A meshless crack propagation algorithm extended to mode II loading of adhesive joints". Paper presented in ICCS25, 25th International Conference on Composite Structures, 2022.
    Published
  71. Ramalho LDC; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Modal analysis of adhesive joints using a radial point interpolation method". Paper presented in ICCS25, 25th International Conference on Composite Structures, 2022.
    Published
  72. Campilho, Raul. "Numerical analysis of adhesively-bonded joints in composite materials". Paper presented in PCM2022, 9th Global Conference on Polymer and Composite Materials, 2022.
    Published
  73. Gomes LAR; Campilho, Raul; Sánchez-Arce IJ; Madani K. "Numerical evaluation of impact-loaded double-lap joints by cohesive modelling". Paper presented in ICSID 2022, 6th International Conference on Structural Integrity and Durability, 2022.
    Published
  74. Maia LAS; Campilho, Raul; Sánchez-Arce IJ; Madani K. "Analysis of bi-adhesive single-lap joints under an impact tensile load". Paper presented in ICSID 2022, 6th International Conference on Structural Integrity and Durability, 2022.
    Published
  75. Barros RBP; Campilho, R.D.S.G.; Sánchez-Arce IJ; Dionísio JMM; Madani K. "Mixed-mode fracture behaviour of structural adhesives by the cracked-lap shear specimen". Paper presented in ICSID 2022, 6th International Conference on Structural Integrity and Durability, 2022.
    Published
  76. Ferreira PAR; Sánchez-Arce IJ; Campilho, Raul; Gonçalves DC. "Geometry effect on the static strength of curved composite bonded joints". Paper presented in ICSID 2022, 6th International Conference on Structural Integrity and Durability, 2022.
    Published
  77. Lopes JPM; Sánchez-Arce IJ; Campilho, Raul; Rocha RJB. "Numerical analysis of the adhesive effect on the behavior of T-adhesive joints". Paper presented in ICSID 2022, 6th International Conference on Structural Integrity and Durability, 2022.
    Published
  78. Silva JESM; Sánchez-Arce IJ; Campilho, Raul; Moreira RDF. "Adhesive material effect on the tensile response of aluminum tubular joints". Paper presented in ICSID 2022, 6th International Conference on Structural Integrity and Durability, 2022.
    Published
  79. Dionísio, J.M.M.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.; Sánchez-Arce, I. J.; Gonçalves, D.C.. "Analysis of the stress singularity in composite adhesive joints". Paper presented in ICOMP2021, 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures, 2021.
    Published
  80. Fonseca, E.M.M.; Oliveira, P.N.; Campilho, R.D.S.G.; Piloto, P.A.G.. "Analytical and numerical methodologies to study four different hot-rolled steel profiles under fire". Paper presented in SYMCOMP2021, 5th International Conference on Numerical and Symbolic Computation Developments and Applications, Évora, 2021.
    Published
  81. Sánchez-Arce, I. J.; Gonçalves, D.C.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Non-linear analysis of adhesive joints by using meshless methods". Paper presented in 2nd International Colloquium of Aerospace Research, Mexicali, 2021.
    Published
  82. Rosas, M.F.M.O.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Numerical analysis of geometrical modification combinations of the tensile strength of tubular adhesives joints". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  83. Brito, R.N.F.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I. J.. "Composite stepped-lap adhesive joint analysis by cohesive zone modelling". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  84. Faria, R.V.F.; Campilho, R.D.S.G.; Gonçalves, P.J.A.; Rocha, R.J.B.; Sánchez-Arce, I. J.. "Numerical analysis by XFEM of hybrid T-peel joints". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  85. Resende, R.F.P.; Resende, B.F.P.; Sánchez-Arce, I. J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Meshless approach to material plasticity in adhesive joints". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  86. Silva, A.F.M.; Peres, L.M.C.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Impact loading analysis of tubular adhesive joints". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  87. Sánchez-Arce, I.J.; Gonçalves, D.C.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Meshless and hyper-elastic implementation to analyse flexible adhesives". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  88. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I.J.. "Applying the dual adhesive technique for strength improvement of bonded joints". Paper presented in IGF26, 26th International Conference on Fracture and Structural Integrity, Turim, 2021.
    Published
  89. Ramalho, L.D.C.; Dionísio, J.M.M.; Campilho, R.D.S.G.; Belinha, J.; Sánchez-Arce, I.J.. "Meshless analysis of the stress singularity in composite adhesive joints". Paper presented in ICCS24, 24th International Conference on Composite Structures, Porto, 2021.
    Published
  90. Oliveira, T.J.S.; Campilho, R.D.S.G.; Cardoso, M.G.; Sánchez-Arce, I.J.; Ramalho, L.D.C.. "Three-dimensional numerical analysis of tubular adhesive joints under torsional loads". Paper presented in MESIC2021, Manufacturing Engineering Society International Conference, 2021.
    Published
  91. Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Modelling adhesively-bonded T-joints by a meshless mesthod". Paper presented in MESIC2021, Manufacturing Engineering Society International Conference, 2021.
    Published
  92. Ramalho, L.D.C.; Dionísio, J.M.M.; Sánchez-Arce, I.J.; Gonçalves, D.C.; Belinha, J.. "Intensity of singular stress fields in single lap joints using the radial point interpolation method". Paper presented in DCE21, 4th Doctoral Congress in Engineering, Porto, 2021.
    Published
  93. Gonçalves, D.C.; Belinha, J.; Campilho, R.D.S.G.. "Topology optimization using a bi-directional evolutionary algorithm combined with the NNRPIM". Paper presented in DCE21, 4th Doctoral Congress in Engineering, Porto, 2021.
    Published
  94. Peres, L.M.C.; Arnaud, M.F.T.D.; Silva, A.F.M.V.; Campilho, R.D.S.G.; Machado, J.J.M.; Marques, E.A.S.; dos Reis, M.Q.; da Silva, L.F.M.. "ometry and adhesive optimization of single-lap adhesive joints under impact". Paper presented in AB2021, 6th International Conference on Structural Adhesive Bonding, Porto, 2021.
    Published
  95. Lopes, V.H.P.; Campilho, R.D.S.G.; Nóvoa, P.J.R.O.; Rocha, R.J.B.; Sánchez-Arce, I.J.. "Experimental and cohesive zone modelling study on joining of sheet moulding compound and carbon-epoxy composites". Paper presented in Experimental and cohesive zone modelling study on joining of sheet moulding compound and carbon-epoxy composites. AB2021, 6th International Conference on Structural Adhesive Bonding, Porto, 2021.
    Published
  96. Lopes, J.P.M.; Campilho, R.D.S.G.; Rocha, R.J.B.; Silva, F.J.G.. "Geometrical study of adhesively-bonded T-joints by cohesive models". Paper presented in ICSI2021, Virtual 4th International Conference on Structural Integrity, 2021.
    Published
  97. Pereira, J.P.O.; Campilho, R.D.S.G.; Silva, F.J.G.; Gonçalves, D.C.. "Adherend effect on the peel strength of a brittle adhesive". Paper presented in ICSI2021, Virtual 4th International Conference on Structural Integrity, 2021.
    Published
  98. Ferreira, J.A.M.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Numerical simulation of adhesively-bonded T-stiffeners by cohesive zone models". Paper presented in FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing, 2021.
    Published
  99. Moreira, F.J.P.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Evaluation of T-joints in aluminium structures under different geometries". Paper presented in FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing, 2021.
    Published
  100. Cardoso, M.G.; Pinto, J.E.C.; Campilho, R.D.S.G.; Nóvoa, P.J.R.O.; Silva, F.J.G.; Ramalho, L.D.C.. "A new structural two-component epoxy adhesive: Strength and fracture characterization". Paper presented in FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing, 2021.
    Published
  101. Sousa, V.F.C.; Silva, F.J.G.; Fecheira, J.S.; Campilho, R.D.S.G.; Candermeulen, V.. "A novel modular design on an equipment to produce “T”-profiles by laser welding". Paper presented in FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing, 2021.
    Published
  102. da Costa, J.D.C.; Campilho, R.D.S.G.; Silva, F.J.G.; Sánchez-Arce, I.J.. "Design of a buried equipment for the collection of urban solid waste". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  103. Pereira, J.A.P.; Campilho, R.D.S.G.; Silva, F.J.G.; Sánchez-Arce, I.J.. "Robotized cell design for component assembly in the automotive industry". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  104. Silva, F.J.G.; Penne, R.; Campilho, R.D.S.G.; Santos, G.; Ferreira, L.P.; Sá, J.C.. "Automation of the discharge process in the over-injection of conduits for Bowden cables". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  105. Vieira, D.; Silva, F.J.G.; Campilho, R.D.S.G.; Sousa, V.F.C.; Ferreira, L.P.. "Expanding features of automated equipment: a new concept for a transfer system of lengthy and low-stiffness products for automobiles". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  106. Martins, N.; Silva, F.J.G.; Campilho, R.D.S.G.; Sousa, V.F.C.; Ferreira, L.P.. "A novel concept of equipment for Bowden cables manufacturing". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  107. Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Matos, J.; Sousa, V.F.C.. "A new concept of jig rotary holder system for 3-axis CNC milling machine operated by the main machine control". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  108. Silva, F.J.G.; Soares, M.; Campilho, R.D.S.G.; Alves, A.C.; Brito, M.; Ferreira, L.P.. "Flexible and low-cost solution to increase the competitiveness of plastic over-injection moulding process". Paper presented in MD2021, International Conference on Machine Design, Porto, 2021.
    Published
  109. Silva, A.F.M.V.; Peres, L.M.C.; Campilho, R.D.S.G.; Rocha, R.J.B.; Silva, F.J.G.. "Cohesive zone parametric analysis in the impact strength of tubular adhesive joints". Paper presented in AJP2021, 2nd International Conference on Advanced Joining Processes, Sintra, 2021.
    Published
  110. Macedo, A.F.L.; Campilho, R.D.S.G.; Silva, F.J.G.; Bellali, M.A.. "Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness". Paper presented in AJP2021, 2nd International Conference on Advanced Joining Processes, Sintra, 2021.
    Published
  111. Costa, B.; Silva, F.J.G.; Sousa, V.F.C.; Campilho, R.D.S.G.; Tojal, M.; Fecheira, J.S.. "Study of the influence of laser welding parameters on the weld quality and microstructure of S355 structural steel". Paper presented in AJP2021, 2nd International Conference on Advanced Joining Processes, Sintra, 2021.
    Published
  112. Costa, B.; Silva, F.J.G.; Sousa, V.F.C.; Campilho, R.D.S.G.; Tojal, M.; Fecheira, J.. "Optimization of the Ag filler metal content on the TIG welding of Cu-Cu and Cu-Steel pipes joints for carbon dioxide refrigeration plants". Paper presented in AJP2021, 2nd International Conference on Advanced Joining Processes, Sintra, 2021.
    Published
  113. Ramalho, L.D.C.; Sánchez-Arce, I. J.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Strength prediction of composite single lap joints using a meshless method". Paper presented in ICCS23, 23th International Conference on Composite Structures, 2020.
    Published
  114. Ramalho, L.D.C.; de Castro P.M.S.T.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Parametric study of fatigue crack growth in cracked finite plates". Paper presented in MDA 2020, 3rd International Conference on Materials Design and Applications, 2020.
    Published
  115. Correia, J.M.C.; Campilho, R.D.S.G.; Rocha, R.J.B.; Liu, Y.; Ramalho, L.D.C.. "Parametric study of composite curved adhesive joints". Paper presented in MDA 2020, 3rd International Conference on Materials Design and Applications, 2020.
    Published
  116. Brito R.F.N.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I. J.. "Composite stepped-lap adhesive joint analysis by cohesive zone modelling". Paper presented in FFW2020, The 8th International Conference on Fracture, Fatigue and Wear, 2020.
    Published
  117. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I. J.. "Applying the dual adhesive technique for strength improvement of bonded joints". Paper presented in FFW2020, The 8th International Conference on Fracture, Fatigue and Wear, 2020.
    Published
  118. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Bonded structures improvement by the dual adhesive technique". Paper presented in VECF1, 1st Virtual European Conference on Fracture, 2020.
    Published
  119. Ribeiro, J.P.S.M.B.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Mixed-mode evaluation of ductile adhesive joints by the single-leg bending test". Paper presented in VECF1, 1st Virtual European Conference on Fracture, 2020.
    Published
  120. Sánchez-Arce, I. J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Analysing single-lap joints bonded with a brittle adhesive by an elastic meshless method". Paper presented in VECF1, 1st Virtual European Conference on Fracture, 2020.
    Published
  121. Sánchez-Arce, I. J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Development of an elasto-plastic meshless technique to analyse bonded structures". Paper presented in IAA2020, 1st International Conference on Industrial Applications of Adhesives, 2020.
    Published
  122. Brito R.F.N.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I. J.. "Material and adhesive effect in adhesively-bonded composite step joints". Paper presented in IAA2020, 1st International Conference on Industrial Applications of Adhesives, 2020.
    Published
  123. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Numerical modelling and experimental validation of step bonded joints". Paper presented in VCSI2020, First Virtual Conference on Structural Integrity, 2020.
    Published
  124. Campilho, R.D.S.G.; Loureiro, F.J.C.F.B.; Rocha, R.J.B.. "Mixed-mode fracture toughness of a structural adhesive by the single-leg bending test". Paper presented in VCSI2020, First Virtual Conference on Structural Integrity, 2020.
    Published
  125. Sánchez-Arce, I. J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Análisis structural de juntas adhesivas usando métodos sin malla". Paper presented in 1er Coloquio Internacional de la Universidad Autónoma de Baja California, 2019.
    Published
  126. Campilho, R.D.S.G.; Gonçalves, D.J.C.. "Numerical analysis of stepped-lap adhesive joints in composite structures". Paper presented in Materiais 2019, X International Materials Symposium | XIX Portuguese Materials Society Meeting, Lisboa, 2019.
    Published
  127. Eusébio, S.M.L.; Campilho, R.D.S.G.. "Modelling of tubular adhesively-bonded joints by the Extended Finite Element Method". Paper presented in MESIC2019, 8th Manufacturing Engineering Society International Conference, Madrid, 2019.
    Published
  128. Machado, D.M.S.R.B.; Campilho, R.D.S.G.; Cardoso, M.G.. "Impact modelling of single-lap bonded joints by cohesive zone modelling". Paper presented in MESIC2019, 8th Manufacturing Engineering Society International Conference, Madrid, 2019.
    Published
  129. Silva, J.O.S.; Campilho, R.D.S.G.; Rocha, R.J.B.; da Silva, F.J.G.. "Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  130. Leal, A.J.S.; Campilho, R.D.S.G.; da Silva, F.J.G.; Silva, D.F.O.; Moreira, F.J.P.. "Comparison of different test configurations for the shear fracture toughness evaluation of a ductile adhesive". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  131. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; da Silva, F.J.G.; Cardoso, M.G.. "Effect of material hybridization on the strength of scarf adhesive joints". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  132. Nunes, F.A.A.; Campilho, R.D.S.G.; Cardoso, M.G.; da Silva, F.J.G.. "Fracture envelope estimation of a structural adhesive by dedicated fracture tests". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  133. Ramesh, V.; Campilho, R.D.S.G.; da Silva, F.J.G.; Rocha, R.J.B.; Kumar, S.. "Evaluation of the extended finite element method for the analysis of bonded joints with different geometries". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  134. Teixeira, J.M.D.; Campilho, R.D.S.G.; da Silva, F.J.G.; Moreira, F.J.P.; Silva, D.F.O.. "Comparative evaluation of different fracture tests for the tensile fracture toughness of a ductile adhesive". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  135. Ferreira, L.R.F.; Campilho, R.D.S.G.; Barbosa, D.R.; Rocha, R.J.B.; da Silva, F.J.G.. "Static strength improvement of tubular aluminium adhesive joints by the outer chamfering technique". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  136. de Sousa, J.C.M.; Campilho, R.D.S.G.; da Silva, F.J.G.; dos Santos, P.M.M.; Fernandes, J.. "Process improvement in the metallic mesh cutting operation associated to tire manufacturing". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  137. Veiga, N.F.M.; Campilho, R.D.S.G.; da Silva, F.J.G.; dos Santos, P.M.M.; Lopes, P.V.. "Design of automated equipment for the assembly of automotive parts". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  138. Chandrasekaran, R.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Reduction of scrap percentage of cast parts by optimizing the process parameters". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  139. Oliveira, H.D.B.C.L.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Design of a modular solution for na autonomous vehicle for cargo transport and handling". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  140. Oliveira, J.J.G.; Campilho, R.D.S.G.; da Silva, F.J.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Adhesive thickness effects on the mixed-mode fracture toughness of bonded joints". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, Porto, 2019.
    Published
  141. Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Strength prediction of adhesively-bonded single-lap joints by advanced discretization techniques". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, Porto, 2019.
    Published
  142. Kumar, S.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Rethinking modular jigs’ design regarding the optimization of machining times". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  143. Amaral, I.; da Silva, F.J.G.; Campilho, R.D.S.G.; Pinto, G.F.L.C.; Gouveia, R.M.. "Improving the cut surface quality by optimizing parameters in the fibre laser cutting process". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  144. Selvaraj, D.K.; da Silva, F.J.G.; Campilho, R.D.S.G.; Baptista, A.; Pinto, G.. "Influence of the natural additive on natural fiber reinforced thermoplastic composite". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  145. Pinto, B.; da Silva, F.J.G.; Costa, M.T.; Campilho, R.D.S.G.; Pereira, T.. "A strategic model to take the first step towards industry 4.0 in SMEs". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  146. Costa, C.; da Silva, F.J.G.; Campilho, R.D.S.G.; Neves, P.; Godina, R.; Ferreira, S.. "Influence of textile rope tension in cap ply production". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  147. Santos, T.; da Silva, F.J.G.; Ramos, S.F.; Campilho, R.D.S.G.; Ferreira, L.P.. "Asset priority setting for maintenance management in the food industry". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  148. Monteiro, J.; da Silva, F.J.G.; Ramos, S.F.; Fonseca, A.; Campilho, R.D.S.G.. "Perceptions and behaviors with regard to eco-packaging: a case study". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  149. Pinto, H.A.; da Silva, F.J.G.; Martinho, R.P.; Campilho, R.D.S.G.; Pinto, A.G.. "Improvement and validation of Zamak die casting moulds". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  150. Tellini, T.; da Silva, F.J.G.; Pereira, M.T.; Campilho, R.D.S.G.; Ferreira, L.P.; Morgado, L.. "Improving intra-logistic flow by physical and digital pathways". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  151. Santos, P.; da Silva, F.J.G.; Campilho, R.D.S.G.; Pinto, G.F.L.C.; Baptista, A.. "A novel concept of a conduit transport system". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  152. Lopes, P.V.; da Silva, F.J.G.; Campilho, R.D.S.G.; de Almeida, F.; Baptista, A.. "Designing a novel and greener asphalt container". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  153. Dias, P.; da Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Santos, T.. "Analysis and improvement of an assembly line in the automotive industry". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  154. Pinto, G.; da Silva, F.J.G.; Campilho, R.D.S.G.; Casais, R.; Fernandes, A.J.; Baptista, A.. "Continuous improvement in maintenance: a case study in the automotive industry involving Lean tools". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  155. Ribeiro, R.; da Silva, F.J.G.; Pinto, A.G.; Campilho, R.D.S.G.; Pinto, H.A.. "Designing a novel system for the introduction of lubricant in control cables for the automotive industry". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  156. Fernandes, J.; da Silva, F.J.G.; Campilho, R.D.S.G.; Pinto, G.F.L.C.. "Intralogistics and industry 4.0: designing a novel shuttle with picking system". Paper presented in FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing, Limerick, 2019.
    Published
  157. Cardoso, M.G.; Campilho, R.D.S.G.. "Adherend material effect on the tensile strength on adhesive bonded tubular joints". Paper presented in DCE19, 2nd Doctoral Congress in Engineering, Porto, 2019.
    Published
  158. Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Using radial point interpolation meshless methods to analyse adhesive single-lap joints". Paper presented in DCE19, 2nd Doctoral Congress in Engineering, Porto, 2019.
    Published
  159. Correia, J.M.C.; Campilho, R.D.S.G.; Liu, Y.. "Parametric analysis of curved adhesive joints in composite structures". Paper presented in ICCS22, 22th International Conference on Composite Structures, Wuhan, 2019.
    Published
  160. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; Rocha, R.J.B.. "Mixed adhesive technique applied to adhesively-bonded stepped-lap joints". Paper presented in Materiais 2019, X International Materials Symposium | XIX Portuguese Materials Society Meeting, Lisboa, 2019.
    Published
  161. Loureiro, F.J.C.F.B.; Campilho, R.D.S.G.; Rocha, R.J.B.. "J-integral analysis of the mixed-mode fracture behaviour of composite bonded joints". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, Porto, 2019.
    Published
  162. Ramesh, V.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Rocha, R.J.B.. "XFEM application for the analysis of single and double-lap bonded joints". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, Porto, 2019.
    Published
  163. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; Da Silva, L.F.M.. "Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, Porto, 2019.
    Published
  164. Lopes, V.H.P.; Campilho, R.D.S.G.; Nóvoa, P.J.R.O.; Pinto, R.F.. "Experimental and cohesive zone modelling study on joining of sheet moulding compound and carbon-epoxy composites". Paper presented in AJP2019, 1st International Conference on Advanced Joining Processes, Ponta Delgada, 2019.
    Published
  165. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Experimental and numerical analysis of dual-adhesive stepped-lap aluminium joints". Paper presented in AJP2019, 1st International Conference on Advanced Joining Processes, Ponta Delgada, 2019.
    Published
  166. Leal, A.J.S.; Campilho, R.D.S.G.. "Experimental and shear fracture characterization of adhesively-bonded joints". Paper presented in HELIX2018, Regional Helix 2018 International Conference on Innovation, Engineering and Entrepeneurship, Guimarães, 2018.
    Published
  167. Nunes, F.A.A.; Campilho, R.D.S.G.. "Evaluation of mixed-mode fracture in adhesively-bonded joints". Paper presented in HELIX2018, Regional Helix 2018 International Conference on Innovation, Engineering and Entrepeneurship, Guimarães, 2018.
    Published
  168. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.; da Silva, F.J.G.. "Modelling stepped-lap adhesive joints by the extended finite element method". Paper presented in TE2018, 25th International Conference on Transdisciplinary Engineering, Modena, 2018.
    Published
  169. Ferreira, L.R.F.; Campilho, R.D.S.G.; Barbosa, D.R.. "Geometrical optimization of axially loaded tubular adhesive joints by finite elements". Paper presented in TE2018, 25th International Conference on Transdisciplinary Engineering, Modena, 2018.
    Published
  170. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Parametric study of adhesive joints under tensile impact loads by cohesive zone modelling". Paper presented in MDA2018, 2nd International Conference on Materials Design and Applications, Porto, 2018.
    Published
  171. Barbosa, D.R.; Campilho, R.D.S.G.; Rocha, R.J.B.; Ferreira, L.R.F.. "Adhesive selection for application in tubular adhesive joints by cohesive models". Paper presented in MDA2018, 2nd International Conference on Materials Design and Applications, Porto, 2018.
    Published
  172. Moreira, F.J.P.; Campilho, R.D.S.G.. "Numerical analysis of bonded joints by the extended finite element method". Paper presented in NT2F18, 18th International Conference on New Trends in Fatigue and Fracture, Lisboa, 2018.
    Published
  173. Nunes, F.A.A.; Campilho, R.D.S.G.. "Asymmetric tapered double-cantilever beam specimen to predict mixed-mode fracture of structural adhesives". Paper presented in NT2F18, 18th International Conference on New Trends in Fatigue and Fracture, Lisboa, 2018.
    Published
  174. Nunes, F.A.A.; Campilho, R.D.S.G.. "Mixed-mode fracture of bonded joints using the asymmetric tapered double-cantilever beam test". Paper presented in IRF2018, 6th International Conference on Integrity, Reliability and Failure, Lisboa, 2018.
    Published
  175. Correia, J.M.C.; Campilho, R.D.S.G.; Liu, Y.. "Geometrical study of curved composite adhesive joints using cohesive zone models". Paper presented in ICCS21, 21th International Conference on Composite Structures, Bolonha, 2018.
    Published • 10.4271/730137
  176. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Extended finite element modelling of aluminium stepped-adhesive joints". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, Lisboa, 2018.
    Published
  177. Silva, D.F.O.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Carvalho, U.T.F.. "Application of a direct/cohesive zone method for the evaluation of scarf adhesive joints". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, Lisboa, 2018.
    Published
  178. dos Santos, P.M.M.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Development of a novel equipment for automated clothing manufacturing". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  179. Barbosa, R.C.N.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Injection mold design for a plastic component with blowing agent". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  180. Santos, R.F.L.; da Silva, F.J.G.; Gouveia, R.M.; Campilho, R.D.S.G.; Pereira, M.T.R.; Ferreira, L.C.P.. "Improving an APEX machine involved in tires manufacturing process". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  181. Silva, D.F.O.; Campilho, R.D.S.G.; da Silva, F.J.G.; Carvalho, U.T.F.. "Experimental and numerical analysis of scarf aluminium adhesive joints". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  182. Almeida, F.J.S.; Campilho, R.D.S.G.; da Silva, F.J.G.; Marques, G.P.. "Development of a numerical methodology for strength prediction of weld-bonded joints". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  183. Barbosa, N.G.C.; Campilho, R.D.S.G.; da Silva, F.J.G.; Moreira, R.D.F.. "Comparison of different adhesively-bonded joint configurations for mechanical structures". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  184. Silva, G.B.; da Silva, F.J.G.; Campilho, R.D.S.G.; Gouveia, R.M.. "Designing a novel feeding system for CNC turning machines". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  185. da Silva, F.J.G.; Campilho, R.D.S.G.; Gouveia, R.M.; Pinto, G.F.L.C.; Baptista, A.. "A novel approach to optimize the design of parts for additive manufacturing". Paper presented in FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing, Ohio, 2018.
    Published
  186. da Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Pereira, M.T.. "Establishing guidelines to improve the high-presssure die casting process of complex aesthetic parts". Paper presented in TE2018, 25th International Conference on Transdisciplinary Engineering, Modena, 2018.
    Published
  187. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in MDA2018, 2nd International Conference on Materials Design and Applications, Porto, 2018.
    Published
  188. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humudity degradation". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, Lisboa, 2018.
    Published
  189. Chandrasekaran, R.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Reduction of scrap percentage of cast parts by optimizing the process parameters". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  190. Eusébio, S.M.L.; Campilho, R.D.S.G.. "Numerical study of tubular adhesive joints by the Extended Finite Element Method". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  191. Correia, J.M.C.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Parametric study of curved adhesive joints in composite materials". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  192. Ferreira, C.L.; Moreira, R.D.F.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Experimental and numerical study of stepped adhesive joints with two adhesives". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  193. Lopes, V.H.P.; Campilho, R.D.S.G.; Nóvoa, P.J.N.O.. "Numerical and experimental study of the adhesion of SMC and prepreg". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  194. Ramalho, L.D.C.; Resende, B.F.P.; Campilho, R.D.S.G.; Belinha, J.A.O.P.. "Strength prediction of adhesively-bonded joints by advanced discretization techniques (NNRPIM)". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  195. Rocha, R.J.B.; Faria, R.V.F.; Campilho, R.D.S.G.. "Use of the Extended Finite Element Method for the strength prediction of hybrid T-joints". Paper presented in BS2018, 8th International Conference on Business Sustainability, Póvoa de Varzim, 2018.
    Published
  196. Viana, F.A.L.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Fracture modelling of adhesively-bonded joints by an inverse method". Paper presented in PCF2018, XVI Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  197. Ribeiro, J.P.S.M.B.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints". Paper presented in PCF2018, XVI Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  198. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Design of step bonded joints by the eXtended Finite Element Method". Paper presented in PCF2018, XVI Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  199. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in PCF2018, XVI Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  200. Machado, R.M.D.; Campilho, R.D.S.G.. "Advanced numerical techniques applied to the strength prediction of stepped-lap adhesive joints". Paper presented in IRF2018, 6th International Conference on Integrity, Reliability and Failure, Lisboa, 2018.
    Published
  201. Ferreira, L.R.F.; Campilho, R.D.S.G.; Rocha, R.J.B.; Barbosa, D.R.. "Cohesive zone optimization of tensile loaded tubular adhesive joints". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, Lisboa, 2018.
    Published
  202. Barbosa, N.G.C.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Moreira, R.D.F.. "Joint geometry optimization for aluminium adhesive bonds under tensile loads". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, Lisboa, 2018.
    Published
  203. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Strength prediction of adhesively-bonded joints with CZM laws estimated by digital image correlation". Paper presented in SYMCOMP2017, 3rd International Conference on Numerical and Symbolic Computation: Developments and applications, Guimarães, 2017.
    Published
  204. Xará, J.T.S.; Campilho, R.D.S.G.. "Evaluation of the extended finitie element method to predict the mechanical behaviour of adhesively-bonded joints". Paper presented in SYMCOMP2017, 3rd International Conference on Numerical and Symbolic Computation: Developments and applications, Guimarães, 2017.
    Published
  205. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Validation of cohesive laws for static strength estimation of adhesively-bonded joints". Paper presented in Materiais 2017, IX International Materials Symposium | XVIII Portuguese Materials Society Meeting, Aveiro, 2017.
    Published
  206. Silva, J.O.S.; Campilho, R.D.S.G.. "Experimental and cohesive zone modelling analysis of adhesively-bonded stepped joints". Paper presented in M2D 2017, 7th International Conference on Mechanics and Materials in Design, Albufeira, 2017.
    Published
  207. Carneiro, M.A.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.. "Experimental and numerical analysis of adhesively-bonded T joints under peel loads". Paper presented in MESIC2017, 7th Manufacturing Engineering Society International Conference, Vigo, 2017.
    Published
  208. Rocha, R.J.B.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Validation of advanced numerical techniques for the strength prediction of adhesively-bonded joints". Paper presented in MESIC2017, 7th Manufacturing Engineering Society International Conference, Vigo, 2017.
    Published
  209. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; da Silva, F.J.G.; da Silva, L.F.M.. "Experimental and numerical analysis of hybrid adhesively-bonded scarf joints". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
    Published
  210. Oliveira, B.M.A.; Campilho, R.D.S.G.; da Silva, F.J.G.; Rocha, R.J.B.. "Comparative evaluation of the ENF and 4ENF fracture tests for the shear toughness estimation of adhesive joints". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
    Published
  211. Rocha, R.J.B.; Campilho, R.D.S.G.. "Detailed investigation of the analysis conditions in the evaluation of bonded joints by cohesive zones models". Paper presented in FFW2017, International Conference on Fracture Fatigue and Wear, Porto, 2017.
    Published
  212. Xará, J.T.S.; Campilho, R.D.S.G.. "eXtended Finite Element Method applied to the strength prediction of adhesively-bonded joints". Paper presented in FFW2017, International Conference on Fracture Fatigue and Wear, Porto, 2017.
    Published
  213. Leal, A.J.S.; Campilho, R.D.S.G.. "Numerical evaluation of the ENF and 4ENF tests for GIIC estimation of adhesive joints". Paper presented in ICCS20, 20th International Conference on Composite Structures, Paris, 2017.
    Published
  214. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Optimization of adhesively-bonded joints for impact loading scenarios.". Paper presented in ICCS20, 20th International Conference on Composite Structures, Paris, 2017.
    Published
  215. Leal, A.J.S.; Campilho, R.D.S.G.. "Numerical evaluation of the ENF and 4ENF tests to estimate the shear toughness (GIIC) of structural adhesives". Paper presented in CIBEM2017, XIII Congresso Ibero-Americano de Engenharia Mecânica, Lisboa, 2017.
    Published
  216. Teixeira, J.M.D.; Campilho, R.D.S.G.. "Modelling of the DCB and TDCB tests for the tensile toughness (GIC) assessment of bonded joints". Paper presented in CIBEM2017, XIII Congresso Ibero-Americano de Engenharia Mecânica, Lisboa, 2017.
    Published
  217. Machado, J.J.M.; Marques, E.A.S.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode I and II determination of CFRP as a function of temperature and strain rate". Paper presented in DCE17, 2nd Doctoral Congress in Engineering, Porto, 2017.
    Published
  218. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in DCE17, 2nd Doctoral Congress in Engineering, Porto, 2017.
    Published
  219. Castro, T.A.M; da Silva, F.J.G.; Campilho, R.D.S.G.. "Optimizing a specific tool for electric terminals crimping process". Paper presented in FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing, Modena, 2017.
    Published
  220. Gomes, T.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Reducing the simulation cost on dual-phase steel stamping process". Paper presented in FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing, Modena, 2017.
    Published
  221. Barbosa, B.; Pereira, M.T.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Solving quality problems in tyre production preparation process: a practical approach". Paper presented in FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing, Modena, 2017.
    Published
  222. Moreira, B.M.D.N.; Gouveira, R.M.; da Silva, F.J.G.; Campilho, R.D.S.G.. "A novel concept of production and assembly processes integration". Paper presented in FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing, Modena, 2017.
    Published
  223. Machado, J.J.M.; Marques, E.A.S.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode I and II determination of CFRP as a function of temperature and strain rate". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
    Published
  224. Gálvez, P.; Carbas, R.J.C.; Campilho, R.D.S.G.; Abenojar, J.; Martínez, M.A.; da Silva, L.F.M.. "Fracture toughness in mode I (GIC) for ductile adhesives". Paper presented in FFW2017, International Conference on Fracture Fatigue and Wear, Porto, 2017.
    Published
  225. Moreira, F.J.P.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Validation of the eXtended Finite Element Method for the strength prediction of T-joints". Paper presented in BS2017, 7th International Conference on Business Sustainability, Póvoa de Varzim, 2017.
    Published
  226. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Numerical optimization of adhesive joints subjected to impact". Paper presented in BS2017, 7th International Conference on Business Sustainability, Póvoa de Varzim, 2017.
    Published
  227. Nunes, F.A.A.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Determination of the fracture toughness of structural adhesives by the Asymmetric Tapered Double-Cantilever Beam (ATDCB) test". Paper presented in BS2017, 7th International Conference on Business Sustainability, Póvoa de Varzim, 2017.
    Published
  228. Ferreira, L.R.F.; Campilho, R.D.S.G.; Barbosa, D.R.; Rocha, R.J.B.. "Numerical parametric study of tubular adhesive joints under tensile loads". Paper presented in BS2017, 7th International Conference on Business Sustainability, Póvoa de Varzim, 2017.
    Published
  229. Barbosa, N.G.C.; Moreira, R.D.F.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Silva, D.F.O.. "Experimental and numerical comparison by cohesive zone models of various types of adhesive joints". Paper presented in BS2017, 7th International Conference on Business Sustainability, Póvoa de Varzim, 2017.
    Published
  230. Pimenta, F.; Gouveia, R.M.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Improving the mobility of high loads in restricted spaces". Paper presented in BS2017, 7th International Conference on Business Sustainability, Póvoa de Varzim, 2017.
    Published
  231. Santos, M.A.S.; Campilho, R.D.S.G.. "Experimental and numerical analysis of the fracture toughness of adhesively-bonded joints". Paper presented in Materiais 2017, IX International Materials Symposium | XVIII Portuguese Materials Society Meeting, Aveiro, 2017.
    Published
  232. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Hybrid adhesively-bonded scarf joints: Experimentation and cohesive zone simulations". Paper presented in M2D 2017, 7th International Conference on Mechanics and Materials in Design, Albufeira, 2017.
    Published
  233. Rosa, C.; Da Silva, F.J.G.; Ferreira, L.P.; Campilho, R.D.S.G.. "SMED methodology: Reduction of setup times for steel-wire rope assembly lines for the automotive industry". Paper presented in MESIC2017, 7th Manufacturing Engineering Society International Conference, Vigo, 2017.
    Published
  234. Figueiredo, J.C.P.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; Da Silva, L.F.M.. "Shear cohesive laws of adhesive joints as a function of the adhesive thickness". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
    Published
  235. Teixeira, J.M.D.; Campilho, R.D.S.G.; Da Silva, F.J.G.. "Numerical assessment of the DCB and TDCB tests for the GIC estimation of adhesive joints". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
    Published
  236. Costa, M.; Viana, G.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
    Published
  237. De Sousa, C.C.R.G.; Campilho, R.D.S.G.; Marques, E.A.S.; Da Silva, L.F.M.. "Overview of different strength prediction techniques for single-lap bonded joints". Paper presented in CEM2016, Mechanical Engineering Conference, Porto, 2016.
    Published
  238. Rocha, R.J.B.; Campilho, R.D.S.G.. "Evaluation of different damage initiation and growth criteria in the cohesive zone modelling analysis of single-lap bonded joints". Paper presented in CEM2016, Mechanical Engineering Conference, Porto, 2016.
    Published
  239. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Use of the direct method for adhesives characterization applied to the strength prediction of double-lap joints". Paper presented in CEM2016, Mechanical Engineering Conference, Porto, 2016.
    Published
  240. De Sousa, C.C.R.G.; Campilho, R.D.S.G.; Marques, E.A.S.; Da Silva, L.F.M.. "Evaluation of analytical and numerical techniques for the strength prediction of single-lap bonded joints with different adhesives". Paper presented in MDA 2016, 1st International Conference on Materials Design and Applications, Porto, 2016.
    Published
  241. Santos, M.A.S.; Campilho, R.D.S.G.. "Numerical evaluation of the mixed-mode fracture of composite bonded joints". Paper presented in IRF2016, 5th International Conference on Integrity, Reliability and Failure, Porto, 2016.
    Published
  242. Soares, A.P.O.A.L.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Mixed-mode fracture toughness of bonded joints with diferente adhesives by the single-leg bending test". Paper presented in ICCS19, 19th International Conference on Composite Structures, Lisboa, 2016.
    Published
  243. Ribeiro, F.M.F.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.. "Strength and failure modes of composite bonded joints with adhesion defects". Paper presented in ICCS19, 19th International Conference on Composite Structures, Lisboa, 2016.
    Published
  244. Xará, J.T.S.; Campilho, R.D.S.G.. "Aluminium-composite single-L joints: Experimentation and numerical analysis by the eXtended Finite Element Method". Paper presented in ICCS19, 19th International Conference on Composite Structures, Lisboa, 2016.
    Published
  245. Ribeiro, F.M.F.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.; Banea, M.D.. "Strength and failure modes in composite bonded joints with defects". Paper presented in CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2016.
    Published
  246. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2016.
    Published
  247. Marques, E.A.S.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Geometrical study of mixed joints for high temperature aerospace applications". Paper presented in CEM2016, Mechanical Engineering Conference, Porto, 2016.
    Published
  248. Machado, J.J.M.; Marques, E.A.S.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode I determination of CFRP as a function of temperature and strain rate". Paper presented in MDA 2016, 1st International Conference on Materials Design and Applications, Porto, 2016.
    Published
  249. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Influence of humidity on the static and fatigue response of adhesively bonded aluminium joints". Paper presented in MDA 2016, 1st International Conference on Materials Design and Applications, Porto, 2016.
    Published
  250. Marques, E.A.S.; Campilho, R.D.S.G.; Flaviani, M.; Banea, M.D.; Sato, C.; da Silva, L.F.M.. "Design and testing of ceramic-aluminium dual adhesive joints for high temperature applications". Paper presented in MDA 2016, 1st International Conference on Materials Design and Applications, Porto, 2016.
    Published
  251. Costa, R.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Increasing flexibility through new design concepts". Paper presented in FAIM2016, 26th International Conference on Flexible Automation and Intelligent Manufacturing, Seul, 2016.
    Published
  252. Silva, A.R.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Full-automated stator winding machine for switched reluctance motors". Paper presented in FAIM2016, 26th International Conference on Flexible Automation and Intelligent Manufacturing, 2016.
    Published
  253. Moreira, B.M.D.N.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Process integration through automated sub-assembly line". Paper presented in IRF2016, 5th International Conference on Integrity, Reliability and Failure, Porto, 2016.
    Published
  254. Costa, M.; Viana, G.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in EURADH 2016, 11th European Adhesion Conference, Glasgow, 2016.
    Published
  255. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; da Silva, F.J.G.. "Scarf bonded joints between different adherends". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  256. Carvalho, U.T.F.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Strength estimation of adhesively-bonded joints with cohesive laws estimated by the direct method". Paper presented in BS2016, 6th International Conference on Business Sustainability, 2016.
    Published
  257. de Oliveira, B.M.A.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Comparative evaluation of the ENF and 4ENF tests to estimate the shear toughness of adhesive joints". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa da Varzim, 2016.
    Published
  258. Domingues, N.R.E.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Strength prediction of hybrid single-L adhesive joints". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  259. Rocha, R.J.B.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Comparison of different modelling conditions in the strength prediction of bonded joints by cohesive models". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  260. Barbosa, B.; da Silva, F.J.G.; Pereira, M.T.R.; Campilho, R.D.S.G.. "Solving quality problems in tire production preparation process: a practical approach". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  261. Costa, C.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Improving a machining process using hydraulic clamping tools". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  262. Rosa, C.; da Silva, F.J.G.; Ferreira, L.P.; Campilho, R.D.S.G.. "Improving the quality and productivity of metallic wire rope assembly lines for automotive industry.". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  263. Santos, R.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Improving the preparation stage of tires production: a practical approach". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  264. Costa, T.; da Silva, F.J.G.; Campilho, R.D.S.G.. "How to reduce non-conformities in the tire manufacturing extrusion process". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  265. Castro, T.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Optimizing a specific tool for electrical terminals crimping process". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  266. Pinto, L.C.M.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Lean manufacturing applied to the steel belt cutting in tire manufacturing". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  267. Gomes, T.D.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Problem anticipation and cost reduction in sheet metal forming processes of dual-phase advanced high strength steels". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  268. Marques, G.V.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Value analysis study regarding barrier mechanism for railway applications". Paper presented in BS2016, 6th International Conference on Business Sustainability, Póvoa de Varzim, 2016.
    Published
  269. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Application of the direct method for cohesive law estimation applied to the strength prediction of double-lap joints". Paper presented in PCF 2016, XV Portuguese Conference on Fracture, Paço d'Arcos, 2016.
    Published
  270. Fernandes, R.L.; Campilho, R.D.S.G.. "Numerical evaluation of dissimilar cohesive models to predict the behaviour of double-cantilever beam specimens". Paper presented in PCF 2016, XV Portuguese Conference on Fracture, Paço d'Arcos, 2016.
    Published
  271. Fernandes, R.L.; Campilho, R.D.S.G.; Banea, M.D.. "Accuracy of different cohesive law shapes for the tensile failure prediction of bonded joints". Paper presented in CLBA 2016. CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2016.
    Published
  272. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.; Martins, M.; de Barros, S.. "Effect of adherend material on the tensile fracture toughness of modern structural adhesives for automotive industry". Paper presented in CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2016.
    Published
  273. Santos, T.F.; Campilho, R.D.S.G.. "eXtended Finite Element Method applied to the strength prediction of double-lap bonded joints". Paper presented in MDA 2016, 1st International Conference on Materials Design and Applications, Porto, 2016.
    Published
  274. Marques, G.P.; Campilho, R.D.S.G.; Da Silva, F.J.G.. "Experimental and numerical analysis of adhesively bonded-welded hybrid single-lap joints: Effect of the adhesive type". Paper presented in IRF2016, 5th International Conference on Integrity, Reliability and Failure, Porto, 2016.
    Published
  275. Costa, R.; Da Silva, F.J.G.; Campilho, R.D.S.G.. "A novel concept of agile assembly machine for housings of motor widescreen wipers". Paper presented in IRF2016, 5th International Conference on Integrity, Reliability and Failure, Porto, 2016.
    Published
  276. Ribeiro, T.E.A.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.; Goglio, L.. "Damage analysis of composite-aluminium adhesively-bonded single-lap joints". Paper presented in ICCS18, 18th International Conference on Composite Structures, Lisboa, 2015.
    Published
  277. Campilho, R.D.S.G.. "Modelling adhesively-bonded joints in composite structures by cohesive zone models". Paper presented in ICCS18, 18th International Conference on Composite Structures, Lisboa, 2015.
    Published
  278. Campilho, R.D.S.G.; Moura, D.C.. "Fracture property determination in natural fibre composites". Paper presented in ICCS18, 18th International Conference on Composite Structures, Lisboa, 2015.
    Published
  279. Azevedo, J.C.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.. "Shear fracture toughness and cohesive laws of adhesively-bonded joints". Paper presented in Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting, Porto, 2015.
    Published
  280. Domingues, N.R.E.; Trojan, J.C.; Campilho, R.D.S.G.; Carbas, R.J.C.; Banea, M.D.; da Silva, L.F.M.. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Paper presented in Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting, Porto, 2015.
    Published
  281. Leitão, A.C.C.; Campilho, R.D.S.G.; Azevedo, J.C.S.; Moura, D.C.; Banea, M.D.. "Shear cohesive law estimation of adhesive layers by digital image correlation". Paper presented in Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting, Porto, 2015.
    Published
  282. Nunes, S.L.S.; Campilho, R.D.S.G.; da Silva, F.J.G.; Fernandes, T.A.B.; Banea, M.D.; Da Silva, L.F.M.. "Comparative failure assessment of single and double-lap joints with varying adhesive systems". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  283. Lopes, R.M.; Campilho, R.D.S.G.; da Silva, F.J.G.; Faneco, T.M.S.. "Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive joints". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  284. Fernandes, R.L.; Campilho, R.D.S.G.; Leitão, A.C.C.; Azevedo, J.C.S.. "Numerical evaluation of the direct method for cohesive law extraction in shear by the End-Notched Flexure test". Paper presented in ICSI 2015, 1st International Conference on Structural Integrity, Funchal, 2015.
    Published
  285. Campilho, R.D.S.G.; Fernandes, T.A.B.. "Comparative evaluation of single-lap joints bonded with different adhesives by cohesive zone modelling". Paper presented in ICSI 2015, 1st International Conference on Structural Integrity, Funchal, 2015.
    Published
  286. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Humidity effects on the fatigue behaviour of adhesively bonded aluminium DCB joints". Paper presented in DCE 2015, 1st Doctoral Congress in Engineering, Porto, 2015.
    Published
  287. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Adherend material effect on the tensile fracture toughness of modern tough structural adhesives". Paper presented in Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting, Porto, 2015.
    Published
  288. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Characterization of TEPS-modified adhesives". Paper presented in Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting, Porto, 2015.
    Published
  289. Luís, J.M.B.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Improving the assembling process of small automotive mechanical devices". Paper presented in FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing, Wolverhampton, 2015.
    Published
  290. Matos, J.A.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Increasing the productivity of a machining cell by means of automation: a case study". Paper presented in FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing, Wolverhampton, 2015.
    Published
  291. Araújo, L.M.B.; da Silva, F.J.G.; Campilho, R.D.S.G.; Matos, J.A.. "A new dynamic holding system for thin metal plate shearing machines". Paper presented in FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing, Wolverhampton, 2015.
    Published
  292. Costa, M.J.R.M.J.; da Silva, F.J.G.; Campilho, R.D.S.G.; Matos, J.A.; Luís, J.M.B.. "Solving quality problems through fully-automated assembly systems: a case study". Paper presented in FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing, Wolverhampton, 2015.
    Published
  293. Araújo, W.F.S.; da Silva, F.J.G.; Campilho, R.D.S.G.; Matos, J.A.. "Full-automation applied to seat suspension mat production cells: a case study". Paper presented in FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing, Wolverhampton, 2015.
    Published
  294. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Adherend material effect on the fracture behaviour of adhesive joints". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  295. Marques, E.A.S.; Campilho, R.D.S.G.; Da Silva, L.F.M.. "Geometrical optimization of ceramic-aluminium dual adhesive joints". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  296. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesive joints: existing and emerging technologies". Paper presented in COBEM 2015, 23rd ABCM International Congress of Mechanical Engineering, Rio de Janeiro, 2015.
    Published
  297. Moreira, R.D.F.; Campilho, R.D.S.G.. "Parametric study of the reinforcement geometry on tensile loaded scarf adhesive repairs". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  298. Faneco, T.M.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Lopes, R.M.. "Strength and fracture characterization of a novel polyurethane adhesive for the automotive industry". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  299. Viana, G.; Costa, M.; Avendaño, R.; Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Impact of adhesive joints for the automotive industry at high and low temperatures". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  300. Rosioara, M.; Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Multi-material adhesive joints for the automotive industry". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, Porto, 2015.
    Published
  301. Costa, M.; Viana, G.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Humidity effects on the mechanical properties of adhesively bonded aluminium DCB joints". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, 2015.
    Published
  302. Fernandes, R.L.; Campilho, R.D.S.G.; Leitão, A.C.C.; Azevedo, J.C.S.. "Numerical Evaluation of the Direct Method for Cohesive Law Extraction in Shear by the End-Notched Flexure Test". 2015.
    10.1016/j.proeng.2015.08.046
  303. Campilho, R.D.S.G.; Fernandes, T.A.B.. "Comparative Evaluation of Single-lap Joints Bonded with Different Adhesives by Cohesive Zone Modelling". 2015.
    10.1016/j.proeng.2015.08.047
  304. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Tensile fracture properties of adhesive joints: comparison of standard and advanced techniques". Paper presented in ICEFA VI, 6th International Conference on Engineering Failure Analysis, Lisboa, 2014.
    Published
  305. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; da Silva, L.F.M.. "Adhesive thickness effects of a ductile adhesive by optical measurement techniques". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  306. Fernandes, T.A.B.; Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  307. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Characterization of a structural polyurethane adhesive modified with thermally expandable particles". Paper presented in EURADH 2014, 10th European Adhesion Conference, Alicante, 2014.
  308. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Structural adhesives modified with thermal expandable particles". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  309. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.. "Juntas adesivas compósitas". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  310. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone model for adhesive joints that includes humidity and fatigue degradation". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  311. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive zone model for adhesive joints that included humidity and fatigue degradation". Paper presented in WCARP-V, 5th World Congress on Adhesion and Related Phenomena, Nara, 2014.
    Published
  312. Araújo, L.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Adding value to metal shear machines through innovative tools". Paper presented in BS2014, 4th International Conference on Business Sustainability, Póvoa de Varzim, 2014.
    Published
  313. Araújo, W.; da Silva, F.J.G.; Campilho, R.D.S.G.; Matos, J.. "Improving the competitiveness of a suspension mat production line". Paper presented in BS2014, 4th International Conference on Business Sustainability, Póvoa de Varzim, 2014.
    Published
  314. Ferreira, A.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Developing innovative tool holder systems for press-brake machines". Paper presented in BS2014, 4th International Conference on Business Sustainability, Póvoa de Varzim, 2014.
    Published
  315. Luís, J.B.; da Silva, F.J.G.; Campilho, R.D.S.G.. "Door glass lifting mechanical devices: from manual to fully-automated assembly line". Paper presented in BS2014, 4th International Conference on Business Sustainability, Póvoa de Varzim, 2014.
    Published
  316. Matos, J.A.; da Silva, F.J.G.; Campilho, R.D.S.G.; Soares, M.. "Lean-manufacturing applied to a machining cell". Paper presented in BS2014, 4th International Conference on Business Sustainability, Póvoa de Varzim, 2014.
    Published
  317. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". Paper presented in PCF 2014, XIV Portuguese Conference on Fracture, Vila Real, 2014.
    Published
  318. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effects of adhesive thickness on the fracture of polyurethane adhesive joints". Paper presented in PCF 2014, XIV Portuguese Conference on Fracture, Vila Real, 2014.
    Published
  319. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Modelling adhesive joints at high temperatures by the eXtended Finite Element Method". Paper presented in EURADH 2014, 10th European Adhesion Conference, Alicante, 2014.
    Published
  320. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Analysis of adherend material effect on the fracture behaviour of adhesive joints for automotive industry". Paper presented in ICEFA VI, 6th International Conference on Engineering Failure Analysis, Lisboa, 2014.
    Published
  321. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  322. Constante, C.J.; Campilho, R.D.S.G.; Pinto, A.M.G.; Moura, D.C.. "GIc evaluation for 3 structural adhesives by standard and optical techniques". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  323. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Effect of adherend material on the fracture behaviour of adhesive joints for automotive industry". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  324. Costa, M.; Viana, G.; Canto, C.; Da Silva, L.F.M.; Banea, M.D.; Chaves, F.J.P.; Campilho, R.D.S.G.; Fernandes, A.A.. "Optimization of the bulk tensile and double cantilever beam specimens used in cohesive zone models". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, Porto, 2014.
    Published
  325. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Banea, M.D.. "Tensile fracture characterization of natural fibre composite joints by an optical measurement method". Paper presented in Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting, Coimbra, 2013.
    Published
  326. Campilho, R.D.S.G.; Banea, M.D.. "Influence of the cohesive law shape of the adhesive layer on the predicted tensile strength of single-lap joints under different geometric conditions". Paper presented in Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting, Coimbra, 2013.
    Published
  327. Moreira, R.D.F.; Pinto, A.M.G.; Campilho, R.D.S.G.. "Numerical evaluation of adhesively-bonded scarf repairs with external reinforcements". Paper presented in Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting, Coimbra, 2013.
    Published
  328. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.. "Tensile fracture properties of adhesively-bonded and co-cured joints in natural fibre composites". Paper presented in ICCS17, 17th International Conference on Composite Structures, Porto, 2013.
    Published
  329. Campilho, R.D.S.G.; Pinto, A.M.G.; da Silva, J.M.F.G.. "Jute fibre-reinforced composites: mechanical characterization in tension, shear and flexure". Paper presented in ICCS17, 17th International Conference on Composite Structures, Porto, 2013.
    Published
  330. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.. "Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method". Paper presented in ACE-X 2013, 7th International Conference on Advanced Computational Engineering and Experimenting, Madrid, 2013.
    Published
  331. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Specimen geometry influence on the tensile fracture toughness of a structural polyurethane adhesive". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, Porto, 2013.
    Published
  332. Campilho, R.D.S.G.; Banea, M.D.. "Strength prediction of bonded joints with the Finite Element Method and Cohesive Zone Models". Paper presented in XIV Congreso de Adhesión y Adhesivos, Porrino, 2013.
    Published
  333. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Characterization of a structural adhesive by advanced numerical techniques". Paper presented in XIV Congreso de Adhesión y Adhesivos, Porrino, 2013.
    Published
  334. da Costa, M.P.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a web application for the design of adhesive joints". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, Porto, 2013.
    Published
  335. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of adhesive thickness on mode I fracture toughness of a structural polyurethane adhesive for automotive applications". Paper presented in XIV Congreso de Adhesión y Adhesivos, Porrino, 2013.
    Published
  336. Pinto, A.M.G.; Campilho, R.D.S.G.; Da Silva, J.F.M.G.; Mendes, I.R.. "Adhesive joints in jute-reinforced natural fibre composites". Paper presented in Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting, Coimbra, 2013.
    Published
  337. Campilho, R.D.S.G.; Banea, M.D.. "Precision of adhesively-bonded joint strength predictions with cohesive zone models by considering different types of approximation laws". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, Porto, 2013.
    Published
  338. Banea, M.D.; Da Silva, L.F.M.; Soares, A.; Assunção, R.; Campilho, R.D.S.G.. "Fracture characterization of a structural polyurethane adhesive as a function of the adhesive thickness". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, Porto, 2013.
    Published
  339. Moreira, R.D.F.; Pinto, A.M.G.; Campilho, R.D.S.G.. "Strength improvement of adhesively-bonded scarf repairs in aluminium structures with external reinforcements". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, Porto, 2013.
    Published
  340. Canto, C.; Da Silva, L.F.M.; Banea, M.D.; Chaves, F.; Campilho, R.D.S.G.; Fernandes, A.A.. "Study of the durability of a new epoxy adhesive". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, Porto, 2013.
    Published
  341. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Experimental and Finite Element design of single-lap joints by adhesive-bonding, welding and hybrid joining". Paper presented in YIC 2012, 1st European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference, 2012.
    Published
  342. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Accuracy of adhesive joint strength predictions by finite element analyses". Paper presented in IJSI 2012, 1st International Conference of the International Journal of Structural Integrity, Porto, 2012.
    Published
  343. Afonso, P.F.P.; Campilho, R.D.S.G.; Pinto, A.M.G.. "Study and optimization of the single-lap and T-peel joints using the finite element method". Paper presented in IJSI 2012, 1st International Conference of the International Journal of Structural Integrity, Porto, 2012.
    Published
  344. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.; da Silva, L.F.M.. "Fracture toughness determination of adhesive and co-cured joints in natural fibre composites". Paper presented in ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting, Istambul, 2012.
    Published
  345. Campilho, R.D.S.G.; Afonso, P.F.P.; Banea, M.D.; da Silva, L.F.M.. "Experimental optimization of single-lap and T-peel joints by bonding, welding and hybrid joining". Paper presented in ICEM15, 15th International Conference on Experimental Mechanics, Porto, 2012.
    Published
  346. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mechanical characterization of a high temperature epoxy adhesive". Paper presented in IJSI 2012, 1st International Conference of the International Journal of Structural Integrity, Porto, 2012.
    Published
  347. Campilho, R.D.S.G.; Pinto, A.M.G.; Da Silva, J.F.M.G.; Mendes, I.R.. "Mechanical characterization and adhesive joints with natural fibre composites". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2012.
    Published
  348. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.; Sato, C.. "Smart adhesive joints". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2012.
    Published
  349. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Numerical modelling of adhesively-bonded joints: effect of the cohesive zone model parameters". Paper presented in PCF 2012, XIII Portuguese Conference on Fracture, Coimbra, 2012.
    Published
  350. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.. "Modelling of composite bonded joints by the extended finite element method". Paper presented in PCF 2012, XIII Portuguese Conference on Fracture, Coimbra, 2012.
    Published
  351. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Fracture tests of adhesive joints bonded with a high temperature epoxy adhesive". Paper presented in PCF 2012, XIII Portuguese Conference on Fracture, Coimbra, 2012.
    Published
  352. Pinto, A.M.G.; Ribeiro, N.F.Q.R.; Campilho, R.D.S.G.; Mendes, I.R.. "Effect of adherend recessing on tensile strength of single lap joints". Paper presented in ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting, Istambul, 2012.
    Published
  353. Gonçalves, D.J.S.; Campilho, R.D.S.G.; Da Silva, J.F.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Tensile evaluation of adhesively-bonded single-lap joints between natural fibre composite structures". Paper presented in ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting, Istambul, 2012.
    Published
  354. Ribeiro, N.F.Q.R.; Campilho, R.D.S.G.; Pinto, A.M.G.. "Optimization of single-lap joints by slotting and chamfering the adherends at the overlap". Paper presented in ICEM15, 15th International Conference on Experimental Mechanics, Porto, 2012.
    Published
  355. Campilho, R.D.S.G.; Moura, D.C; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Optical measurement method to estimate the tension cohesive law of adhesive joints in natural fibre composites". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2012.
    Published
  356. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Cohesive law shape effects on the strength prediction of adhesive joints with cohesive zone models". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2012.
    Published
  357. Gonçalves, D.J.S.; Campilho, R.D.S.G.; Da Silva, L.F.M.; Fernandes, J.L.M.. "The use of the boundary element method in the analysis of single lap joints". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2012.
    Published
  358. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Baptista, A.P.M.. "Analytical, numerical and experimental analysis of unbalanced adhesive single-lap joints between aluminium adherends". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, Rio de Janeiro, 2012.
    Published
  359. Campilho, R.D.S.G.; Chaves, F.J.P.; Pinto, A.M.G.; Banea, M.D.; da Silva, L.F.M.. "Influence of the cohesive law parameters on the strength prediction of adhesively-bonded joints". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, Guimarães, 2011.
    Published
  360. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Chaves, F.J.P.; da Silva, L.F.M.. "Feasibility of the extended finite element method for the simulation of composite bonded joints". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, Guimarães, 2011.
    Published
  361. Campilho, R.D.S.G.. "Fibre-reinforced composite materials: an improvement in sustainability". Paper presented in BS2011, Second International Conference on Business Sustainability 2011, Póvoa de Varzim, 2011.
    Published
  362. Campilho, R.D.S.G.; Banea, M.D.; Neto J.A.P.B.; da Silva, L.F.M.. "Numerical modelling of single-lap joints by cohesive zone models: influence of cohesive law parameters". Paper presented in ICCS16, 16th International Conference on Composite Structures, 2011.
    Published
  363. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Techniques for the repair of wood members by using adhesively-bonded carbon-epoxy patches". Paper presented in ICCS16, 16th International Conference on Composite Structures, Porto, 2011.
    Published
  364. Campilho, R.D.S.G.; Almeida, J.B.; Pinto, A.M.G.; Banea, M.D.; da Silva, L.F.M.. "Experimental and finite element evaluation of spot welded-bonded single lap joints". Paper presented in ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting, Vilamoura, 2011.
    Published
  365. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; da Silva, L.F.M.. "Optimization study of hybrid spot welded-bonded single-lap joints". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, Porto, 2011.
    Published
  366. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Influência dos parâmetros coesivos na previsão de resistência de juntas adesivas". Paper presented in CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica, 2011.
    Published
  367. Campilho, R.D.S.G.; Pinto, A.M.G.; Neto J.A.P.B.; Banea, M.D.; da Silva, L.F.M.. "Análise experimental e por elementos finitos de juntas de sobreposição simples híbridas (soldadas/adesivas)". Paper presented in CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica, Porto, 2011.
    Published
  368. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Numerical and experimental study of tensile strength of single and double-strap repairs". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, Guimarães, 2011.
    Published
  369. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on the shear strength of aluminium single-lap bonded joints for high temperature applications". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, Porto, 2011.
    Published
  370. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Strap repairs optimization by using embedded patches". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, Guimarães, 2011.
    Published
  371. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.; De Jesus, A.M.P.. "Characterization of aluminium single-lap joints for high temperature applications". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, Guimarães, 2011.
    Published
  372. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature and test speed dependence of the tensile properties of an epoxy adhesive". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, Guimarães, 2011.
    Published
  373. Banea, M.D.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study". Paper presented in ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting, Vilamoura, 2011.
  374. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Mechanical behaviour of adhesive joints with embedded patches". Paper presented in ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting, Vilamoura, 2011.
    Published
  375. Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.P.B.; da Silva, L.F.M.. "Modelling of single-lap joints using cohesive zones models: effect of the cohesive parameters on the output of the simulations". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, Porto, 2011.
    Published
  376. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, Porto, 2011.
    Published
  377. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Baptista, A.P.M.. "Strap repairs by using embedded patches. Numerical analysis and experimental results". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, Porto, 2011.
    Published
  378. Neto, J.A.B.P.; Campilho, R.D.S.G.; Da Silva, L.F.M.. "Parametric study of adhesive joints with composites". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, Porto, 2011.
    Published
  379. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Strength of single-lap joints with a bent geometry: experimental and numerical evaluation". Paper presented in ADHESION’11, 11th International Conference on the Science and Technology of Adhesion and Adhesives, York, 2011.
    Published
  380. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on mode II fracture toughness of adhesively bonded joints". Paper presented in ADHESION’11, 11th International Conference on the Science and Technology of Adhesion and Adhesives, York, 2011.
    Published
  381. Campilho, R.D.S.G.; Pinto, A.M.G.; de Moura, M.F.S.F.; Mendes, I.R.; Banea, M.D.; da Silva, L.F.M.. "Taper angle optimization of scarf repairs in carbon-epoxy laminates". Paper presented in CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010, Porto, 2010.
    Published
  382. Campilho, R.D.S.G.; Banea, M.D.; Pinto, A.M.G.; da Silva, L.F.M.; de Jesus, A.M.P.. "Strength prediction of single and double-lap joints by finite element modelling". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, Paris, 2010.
    Published
  383. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode I fracture toughness of adhesively bonded joints in a high temperature environment". Paper presented in CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010, Porto, 2010.
    Published
  384. Banea, M.D.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode I Fracture Toughness of Adhesively Bonded Joints as a Function of Temperature: Experimental and Numerical Study". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, Paris, 2010.
    Published
  385. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Aires, S.M.; Baptista, A.P.M.. "Strength improvement in single-lap joints by hole drilling at the overlap". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, Paris, 2010.
    Published
  386. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode I fracture toughness prediction as a function of temperature for a high temperature epoxy adhesive". Paper presented in MECOM 2010 – CILAMCE 2010, 2nd South American Congress on Computational Mechanics, Buenos Aires, 2010.
    Published
  387. Campilho, R.D.S.G.; Banea, M.D.; Pinto, A.M.G.; da Silva, L.F.M.. "Determinação da lei coesiva em modo I de uma junta colada de compósito de carbono-epóxido pelo método dos elementos finitos extendido". Paper presented in ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas, Porto, 2010.
    Published
  388. Campilho, R.D.S.G.; Banea, M.D.; Pinto, A.M.G.; da Silva, L.F.M.. "Reparação de vigas de madeira com laminados de compósito de carbono-epóxido". Paper presented in ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas, Porto, 2010.
    Published
  389. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; Baptista, A.P.M.. "Ligação adesiva de polietileno e materiais compósitos". Paper presented in ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas, Porto, 2010.
    Published
  390. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on the mode I fracture toughness of adhesively bonded joints". Paper presented in 33rd Annual Meeting of the Adhesion Society, Florida, 2010.
    Published
  391. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Durão, L.M.P.; Silva, R.F.; Baptista, A.P.M.. "Effect of plug filling, testing velocity and temperature on the tensile strength of strap repairs on aluminium structures". Paper presented in CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010, Porto, 2010.
    Published
  392. Banea, M.D.; De Sousa, F.S.M.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effects of Temperature and Strain Rate on the Mechanical Properties of a High Temperature Epoxy Adhesive". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, Paris, 2010.
    Published
  393. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Silva, R.F.; da Silva, L.F.M.. "Strength improvement of adhesively-bonded joints using a reverse-bent geometry". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, Paris, 2010.
    Published
  394. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Marques, E.A.S.; da Silva, L.F.M.. "Experimental and numerical study of a bent configuration for the single-lap joint". Paper presented in WCARP-IV, 4th World Congress on Adhesion and Related Phenomena, Arcachon, 2010.
    Published
  395. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Morais, J.J.L.; Santos, C.L.; Domingues, J.J.M.S. "Reparação de vigas de madeira danificadas por esmagamento com compósitos de carbono-epóxido". Paper presented in JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia, Porto, 2009.
    Published
  396. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Morais, J.J.L.; Domingues, J.J.M.S.. "Optimização da geometria de reparações adesivas por sobreposição simples em materiais compósitos". Paper presented in JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia, Porto, 2009.
    Published
  397. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures". Paper presented in ICCS15, 15th International Conference on Composite Structures, Porto, 2009.
    Published
  398. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Santos, C.L.; Domingues, J.J.M.S.. "Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, Roma, 2009.
    Published
  399. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Rocha, J.M.M.; Morais, J.J.L.; Domingues, J.J.M.S.. "Strength prediction of adhesively-bonded repairs on carbon-epoxy laminates by the single and double-strap techniques". Paper presented in IRF2009, 3rd International Conference on Integrity, Reliability and Failure, Porto, 2009.
    Published
  400. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Durão, L.M.P.; Baptista, A.P.M.. "Effect of plug filling, testing velocity and temperature on the tensile strength of single and double-strap repairs on aluminium structures". Paper presented in IRF2009, 3rd International Conference on Integrity, Reliability and Failure, Porto, 2009.
    Published
  401. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; Baptista, A.P.M.. "Determinação experimental da resistência ao corte de juntas adesivas por sobreposição simples com substratos de polietileno e polipropileno". Paper presented in JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia, Porto, 2009.
    Published
  402. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; da Silva, L.F.M.; Baptista, A.P.M.. "Determinação experimental da taxa crítica de libertação de energia em modo I de um adesivo acrílico pelo ensaio Double Cantilever Beam (DCB)". Paper presented in JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia, Porto, 2009.
    Published
  403. Ramantani, D.A.; De Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Fracture characterization of sandwich material interfaces under mode I loading using crack equivalent concept". Paper presented in ICCS15, 15th International Conference on Composite Structures, Porto, 2009.
    Published
  404. de Moura, M.F.S.F.; Gonçalves, J.P.M.; Campilho, R.D.S.G.. "Determination of the Cohesive Law in Adhesive Bonded Joints under Pure Mode I Loading". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, Roma, 2009.
    Published
  405. Ramantani, D.A.; De Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Modelling Adhesive Bonded Repairs on Sandwich Structures with the use of Cohesive Mixed-Mode Damage Models". Paper presented in Composites2009, 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Londres, 2009.
    Published
  406. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Strength prediction of adhesively-bonded scarf repairs in composite structures under bending". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, Lisboa, 2009.
    Published
  407. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.. "Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, Lisboa, 2009.
    Published
  408. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, Lisboa, 2009.
    Published
  409. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; da Silva, L.F.M.; Chousal, J.A.G.; Baptista, A.P.M.. "Shear modulus and strength of an acrylic adhesive with the notched plate shear method (arcan) and the thick adherend shear test (tast)". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, Lisboa, 2009.
    Published
  410. Barreto, A.M.J.P.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Morais, J.J.L.; Santos, C.L.. "Repair of wood trusses loaded in tension with adhesively-bonded carbon-epoxy patches". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, Roma, 2009.
    Published
  411. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature Dependence of the Fracture Toughness of Adhesively Bonded Joints". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, Roma, 2009.
    Published
  412. Pinto, A.M.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Mendes, I.R.. "Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, Roma, 2009.
    Published
  413. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Buckling behaviour of carbon-epoxy adhesively-bonded scarf repairs". Paper presented in ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting, Barcelona, 2008.
    Published
  414. De Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Aplicação de modelos coesivos para a determinação da resistência mecânica de juntas coladas". Paper presented in CLME’2008, 5º Congresso Luso-Moçambicano de Engenharia, Maputo, 2008.
    Published
  415. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Morais, J.J.L.; Domingues, J.J.M.S.. "Reparações em materiais compósitos". Paper presented in CLME’2008, 5º Congresso Luso-Moçambicano de Engenharia, Maputo, 2008.
    Published
  416. De Moura, M.F.S.F.; Campilho, R.D.S.G.; Ramantani, D.A.; Marques, A.T.. "Repair of Composites and Sandwich Structures". Paper presented in Advanced School on Sandwich Structures, Porto, 2008.
    Published
  417. Ramantani, D.A.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Marques, A.T.. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". Paper presented in 8th International Conference on Sandwich Structures (ICSS 8), Porto, 2008.
    Published
  418. Ramantani, D.A.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Marques, A.T.. "Cohesive mixed-mode damage model applied to the simulation of the mechanical behaviour of a repaired sandwich beam". Paper presented in 13th European Conference on Composite Materials (ECCM13), Estocolmo, 2008.
    Published
  419. De Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Mixed-Mode Cohesive Damage Model Applied to the Simulation of the Mechanical Behaviour of Laminate Composite Adhesive Joints". Paper presented in ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting, Barcelona, 2008.
    Published
  420. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Gonçalves, J.P.M.. "Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method". Paper presented in PCF 2008 - 11th Portuguese Conference on Fracture, Lisboa, 2008.
    Published
  421. Ramantani, D.A.; De Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Numerical simulation of the mechanical behavior of a repaired sandwich beam using a cohesive damage model". Paper presented in PCF 2008 - 11th Portuguese Conference on Fracture, Lisboa, 2008.
    Published
  422. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Adhesively bonded single-lap joints between polyethylene and other materials. Numerical analysis and experimental results". Paper presented in PCF 2008 - 11th Portuguese Conference on Fracture, Lisboa, 2008.
    Published
  423. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive". Paper presented in ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting, Barcelona, 2008.
    Published
  424. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Tensile behaviour of three-dimensional carbon-epoxy adhesively-bonded single and double-strap repairs". Paper presented in ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting, Barcelona, 2008.
    Published
  425. Campilho, R.D.S.G.; Amaro, A.M.; De Moura, M.F.S.F.; Reis, P.N.B.. "Intralaminar toughness characterization of unidirectional CFRP composites". Paper presented in 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), Les Diablerets, 2008.
    Published
  426. Reis, P.N.B.; Amaro, A.M.; Magalhães, A.M.; De Moura, M.F.S.F.; Campilho, R.D.S.G.. "Optimization of the taper angle on adhesive single-lap joints". Paper presented in 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), Les Biablerets, 2008.
    Published
  427. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Chousal, J.A.G.; Campilho, R.D.S.G.. "Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints". Paper presented in ACE-X 2007, International Conference on Advanced Computational Engineering and Experimenting, Alvor, 2007.
    Published
  428. Ramantani, D.A.; Nóvoa, P.J.R.O.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Marques, A.T.. "A finite element and experimental study of composite tubular joints". Paper presented in Materiais 2007, IV International Materials Symposium | XIII Portuguese Materials Society Meeting, Porto, 2007.
    Published
  429. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Computational modelling of the residual strength of repaired composite laminates with different geometries using a cohesive damage model". Paper presented in ACE-X 2007, International Conference on Advanced Computational Engineering and Experimenting, Alvor, 2007.
    Published
  430. Ramos, C.A.; Oliveira, R.; Campilho, R.D.S.G.; Marques, A.T.. "Modeling of fibre bragg grating sensor plates". Paper presented in III European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, Lisboa, 2006.
    Published
  431. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Damage Initiation and Growth in Single and Double-Lap Repairs on CFRP Composite Joints with Different Configurations". Paper presented in Materiais 2005, III International Materials Symposium | XII Portuguese Materials Society Meeting, Aveiro, 2005.
    Published
  432. Campilho, R.D.S.G.; De Moura, M.F.S.F.. "Modelação da execução de reparações em materiais compósitos". Paper presented in 4ªs Jornadas Mecânica, Automóvel, Organização e Gestão Industrial, Energia e Ambiente, Porto, 2004.
    Published
  433. Campilho, R.D.S.G.. "Autocarro com capacidade de transporte de passageiros incapacitados dos membros inferiores". Paper presented in 3ªs Jornadas Politécnicas de Engenharia, Coimbra, 2003.
    Published
Conference poster
  1. Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Matos, J.; Sousa, V.F.C.. "A new concept of jig rotary holder system for 3-axis CNC milling machine operated by the main machine control". Paper presented in MD2021, International Conference on Machine Design, 2021.
  2. Silva, F.J.G.; Soares, M.; Campilho, R.D.S.G.; Alves, A.C.; Brito, M.; Ferreira, L.P.. "Flexible and low-cost solution to increase the competitiveness of plastic over-injection moulding process". Paper presented in MD2021, International Conference on Machine Design, 2021.
  3. Brito R.F.N.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I. J.. "Material and adhesive effect in adhesively-bonded composite step joints". Paper presented in IAA2020, 1st International Conference on Industrial Applications of Adhesives, 2020.
  4. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; Rocha, R.J.B.. "Mixed adhesive technique applied to adhesively-bonded stepped-lap joints". Paper presented in Materiais 2019, X International Materials Symposium | XIX Portuguese Materials Society Meeting, 2019.
  5. Loureiro, F.J.C.F.B.; Campilho, R.D.S.G.; Rocha, R.J.B.. "J-integral analysis of the mixed-mode fracture behaviour of composite bonded joints". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, 2019.
  6. Ramesh, V.; Campilho, R.D.S.G.; da Silva, F.J.G.; Rocha, R.J.B.. "XFEM application for the analysis of single and double-lap bonded joints". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, 2019.
  7. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S; Machado, J.J.M.; da Silva, L.F.M.. "Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling". Paper presented in AB2019, 5th International Conference on Structural Adhesive Bonding, 2019.
  8. Lopes, V.H.P.; Campilho, R.D.S.G.; Nóvoa, P.J.R.O.; Pinto, R.F.. "Experimental and cohesive zone modelling study on joining of sheet moulding compound and carbon-epoxy composites". Paper presented in AJP2019, 1st International Conference on Advanced Joining Processes, 2019.
  9. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Experimental and numerical analysis of dual-adhesive stepped-lap aluminium joints". Paper presented in AJP2019, 1st International Conference on Advanced Joining Processes, 2019.
  10. Machado, R.M.D.; Campilho, R.D.S.G.. "Advanced numerical techniques applied to the strength prediction of stepped-lap adhesive joints". Paper presented in IRF2018, 6th International Conference on Integrity, Reliability and Failure, 2018.
  11. Ferreira, L.R.F.; Campilho, R.D.S.G.; Rocha, R.J.B.; Barbosa, D.R.. "Cohesive zone optimization of tensile loaded tubular adhesive joints". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, 2018.
  12. Barbosa, N.G.C.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Moreira, R.D.F.. "Joint geometry optimization for aluminium adhesive bonds under tensile loads". Paper presented in EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives, 2018.
  13. Santos, M.A.S.; Campilho, R.D.S.G.. "Experimental and numerical analysis of the fracture toughness of adhesively-bonded joints". Paper presented in Materiais 2017, IX International Materials Symposium | XVIII Portuguese Materials Society Meeting, 2017.
  14. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Hybrid adhesively-bonded scarf joints: Experimentation and cohesive zone simulations". Paper presented in M2D 2017, 7th International Conference on Mechanics and Materials in Design, 2017.
  15. Rosa, C.; da Silva, F.J.G.; Ferreira, L.P.; Campilho, R.D.S.G.. "SMED methodology: Reduction of setup times for steel-wire rope assembly lines for the automotive industry". Paper presented in MESIC2017, 7th Manufacturing Engineering Society International Conference, 2017.
  16. Figueiredo, J.C.P.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Shear cohesive laws of adhesive joints as a function of the adhesive thickness". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, 2017.
  17. Teixeira, J.M.D.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Numerical assessment of the DCB and TDCB tests for the GIC estimation of adhesive joints". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, 2017.
  18. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Development of a cohesive element for adhesive joints subjected to fatigue and humidity degradation". Paper presented in AB2017, 4th International Conference on Structural Adhesive Bonding, 2017.
  19. Fernandes, R.L.; Campilho, R.D.S.G.; Banea, M.D.. "Accuracy of different cohesive law shapes for the tensile failure prediction of bonded joints". Paper presented in CLBA 2016. CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos, 2016.
  20. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.; Martins, M.; de Barros, S.. "Effect of adherend material on the tensile fracture toughness of modern structural adhesives for automotive industry". Paper presented in CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos, 2016.
  21. Santos, T.F.; Campilho, R.D.S.G.. "eXtended Finite Element Method applied to the strength prediction of double-lap bonded joints". Paper presented in MDA 2016, 1st International Conference on Materials Design and Applications, 2016.
  22. Marques, G.P.; Campilho, R.D.S.G.; da Silva, F.J.G.. "Experimental and numerical analysis of adhesively bonded-welded hybrid single-lap joints: Effect of the adhesive type". Paper presented in IRF2016, 5th International Conference on Integrity, Reliability and Failure, 2016.
  23. Costa, R.; da Silva, F.J.G.; Campilho, R.D.S.G.. "A novel concept of agile assembly machine for housings of motor widescreen wipers". Paper presented in IRF2016, 5th International Conference on Integrity, Reliability and Failure, 2016.
  24. Moreira, R.D.F.; Campilho, R.D.S.G.. "Parametric study of the reinforcement geometry on tensile loaded scarf adhesive repairs". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, 2015.
  25. Faneco, T.M.S.; Campilho, R.D.S.G.; da Silva, F.J.G.; Lopes, R.M.. "Strength and fracture characterization of a novel polyurethane adhesive for the automotive industry". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, 2015.
  26. Viana, G.; Costa, M.; Avendano, R.; Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Impact of adhesive joints for the automotive industry at high and low temperatures". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, 2015.
  27. Rosioara, M.; Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Multi-material adhesive joints for the automotive industry". Paper presented in AB2015, 3rd International Conference on Structural Adhesive Bonding, 2015.
  28. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Modelling adhesive joints at high temperatures by the eXtended Finite Element Method". Paper presented in EURADH 2014, 10th European Adhesion Conference, 2014.
  29. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Analysis of adherend material effect on the fracture behaviour of adhesive joints for automotive industry". Paper presented in ICEFA VI, 6th International Conference on Engineering Failure Analysis, 2014.
  30. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, 2014.
  31. Constante, C.J.; Campilho, R.D.S.G.; Pinto, A.M.G.; Moura, D.C.. "GIc evaluation for 3 structural adhesives by standard and optical techniques". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, 2014.
  32. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Effect of adherend material on the fracture behaviour of adhesive joints for automotive industry". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, 2014.
  33. Costa, M.; Viana, G.; Canto, C.; da Silva, L.F.M.; Banea, M.D.; Chaves, F.J.P.; Campilho, R.D.S.G.; Fernandes, A.A.. "Optimization of the bulk tensile and double cantilever beam specimens used in cohesive zone models". Paper presented in CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos, 2014.
  34. Pinto, A.M.G.; Campilho, R.D.S.G.; Da Silva, J.F.M.G.; Mendes, I.R.. "Adhesive joints in jute-reinforced natural fibre composites". Paper presented in Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting, 2013.
  35. Campilho, R.D.S.G.; Banea, M.D.. "Precision of adhesively-bonded joint strength predictions with cohesive zone models by considering different types of approximation laws". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, 2013.
  36. Banea, M.D.; da Silva, L.F.M.; Soares, A.; Assunção, R.; Campilho, R.D.S.G.. "Fracture characterization of a structural polyurethane adhesive as a function of the adhesive thickness". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, 2013.
  37. Moreira, R.D.F.; Pinto, A.M.G.; Campilho, R.D.S.G.. "Strength improvement of adhesively-bonded scarf repairs in aluminium structures with external reinforcements". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, 2013.
  38. Canto, C.; da Silva, L.F.M.; Banea, M.D.; Chaves, F.; Campilho, R.D.S.G.; Fernandes, A.A.. "Study of the durability of a new epoxy adhesive". Paper presented in AB2013, 2nd International Conference on Structural Adhesive Bonding, 2013.
  39. Pinto, A.M.G.; Ribeiro, N.F.Q.R.; Campilho, R.D.S.G.; Mendes, I.R.. "Effect of adherend recessing on tensile strength of single lap joints". Paper presented in ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting, 2012.
  40. Gonçalves, D.J.S.; Campilho, R.D.S.G.; Da Silva, J.F.M.G.; Banea, M.D.; da Silva, L.F.M.. "Tensile evaluation of adhesively-bonded single-lap joints between natural fibre composite structures". Paper presented in ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting, 2012.
  41. Ribeiro, N.F.Q.R.; Campilho, R.D.S.G.; Pinto, A.M.G.. "Optimization of single-lap joints by slotting and chamfering the adherends at the overlap". Paper presented in ICEM15, 15th International Conference on Experimental Mechanics, 2012.
  42. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.; da Silva, L.F.M.. "Optical measurement method to estimate the tension cohesive law of adhesive joints in natural fibre composites". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, 2012.
  43. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Cohesive law shape effects on the strength prediction of adhesive joints with cohesive zone models". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, 2012.
  44. Gonçalves, D.J.S.; Campilho, R.D.S.G.; da Silva, L.F.M.; Fernandes, J.L.M.. "The use of the boundary element method in the analysis of single lap joints". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, 2012.
  45. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Baptista, A.P.M.. "Analytical, numerical and experimental analysis of unbalanced adhesive single-lap joints between aluminium adherends". Paper presented in CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos, 2012.
  46. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Strap repairs optimization by using embedded patches". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, 2011.
  47. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.; De Jesus, A.M.P.. "Characterization of aluminium single-lap joints for high temperature applications". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, 2011.
  48. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature and test speed dependence of the tensile properties of an epoxy adhesive". Paper presented in Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting, 2011.
  49. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study". Paper presented in ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting, 2011.
  50. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Mechanical behaviour of adhesive joints with embedded patches". Paper presented in ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting, 2011.
  51. Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.P.B.; da Silva, L.F.M.. "Modelling of single-lap joints using cohesive zones models: effect of the cohesive parameters on the output of the simulations". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, 2011.
  52. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, 2011.
  53. Neto, J.A.P.B.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Parametric study of adhesive joints with composites". Paper presented in AB2011, International Conference on Structural Adhesive Bonding, 2011.
  54. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; da Silva, L.F.M.. "Strength of single-lap joints with a bent geometry: experimental and numerical evaluation". Paper presented in ADHESION’11, 11th International Conference on the Science and Technology of Adhesion and Adhesives, 2011.
  55. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on mode II fracture toughness of adhesively bonded joints". Paper presented in ADHESION’11, 11th International Conference on the Science and Technology of Adhesion and Adhesives, 2011.
  56. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on the mode I fracture toughness of adhesively bonded joints". Paper presented in 33rd Annual Meeting of the Adhesion Society, 2010.
  57. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Durão, L.M.P.; Silva, R.F.; Baptista, A.P.M.. "Effect of plug filling, testing velocity and temperature on the tensile strength of strap repairs on aluminium structures". Paper presented in CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010, 2010.
  58. Banea, M.D.; De Sousa, F.S.M.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effects of Temperature and Strain Rate on the Mechanical Properties of a High Temperature Epoxy Adhesive". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, 2010.
  59. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Silva, R.F.; da Silva, L.F.M.. "Strength improvement of adhesively-bonded joints using a reverse-bent geometry". Paper presented in ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting, 2010.
  60. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Marques, E.A.S.; da Silva, L.F.M.. "Experimental and numerical study of a bent configuration for the single-lap joint". Paper presented in WCARP-IV, 4th World Congress on Adhesion and Related Phenomena, 2010.
  61. Ramantani, D.A.; De Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Modelling Adhesive Bonded Repairs on Sandwich Structures with the use of Cohesive Mixed-Mode Damage Models". Paper presented in Composites2009, 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, 2009.
  62. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Strength prediction of adhesively-bonded scarf repairs in composite structures under bending". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, 2009.
  63. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.. "Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, 2009.
  64. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, 2009.
  65. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; da Silva, L.F.M.; Chousal, J.A.G.; Baptista, A.P.M.. "Shear modulus and strength of an acrylic adhesive with the notched plate shear method (arcan) and the thick adherend shear test (tast)". Paper presented in Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting, 2009.
  66. Barreto, A.M.J.P.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Morais, J.J.L.; Santos, C.L.. "Repair of wood trusses loaded in tension with adhesively-bonded carbon-epoxy patches". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, 2009.
  67. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature Dependence of the Fracture Toughness of Adhesively Bonded Joints". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, 2009.
  68. Pinto, A.M.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Mendes, I.R.. "Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures". Paper presented in ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting, 2009.
  69. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive". Paper presented in ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting, 2008.
  70. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Tensile behaviour of three-dimensional carbon-epoxy adhesively-bonded single and double-strap repairs". Paper presented in ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting, 2008.
  71. Campilho, R.D.S.G.; Amaro, A.M.; De Moura, M.F.S.F.; Reis, P.N.B.. "Intralaminar toughness characterization of unidirectional CFRP composites". Paper presented in 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), 2008.
  72. Reis, P.N.B.; Amaro, A.M.; Magalhães, A.M.; De Moura, M.F.S.F.; Campilho, R.D.S.G.. "Optimization of the taper angle on adhesive single-lap joints". Paper presented in 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), 2008.
  73. Ramantani, D.A.; Nóvoa, P.J.R.O.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Marques, A.T.. "A finite element and experimental study of composite tubular joints". Paper presented in Materiais 2007, IV International Materials Symposium | XIII Portuguese Materials Society Meeting, 2007.
  74. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Computational modelling of the residual strength of repaired composite laminates with different geometries using a cohesive damage model". Paper presented in ACE-X 2007, International Conference on Advanced Computational Engineering and Experimenting, 2007.
  75. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Damage Initiation and Growth in Single and Double-Lap Repairs on CFRP Composite Joints with Different Configurations". Paper presented in Materiais 2005, III International Materials Symposium | XII Portuguese Materials Society Meeting, 2005.
Edited book
  1. Campilho, Raul. Advances in the experimentation and numerical modeling of material joining processes. Basel, Switzerland: MDPI. 2024.
    Published • Editor
  2. Campilho, Raul; Seenivasan M. Abstracts book of 8ICLSHSCW, 8th International Congress on Life, Social, and Health Sciences in a Changing World. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  3. Campilho, Raul; Thamizhmaran K. Abstracts book of 12IISRC, 12th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  4. Campilho, Raul; Riya C. Abstracts book of 8IBCPEAS, 8th International Baskent Congress on Physical, Engineering and Applied Sciences. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  5. Campilho, Raul; Seenivasan M. Abstracts book of 7INYARC, 7th International New York Academic Research Congress on Life, Engineering, and Applied Sciences. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  6. Campilho, Raul; Thamizhmaran K. Abstracts book of 9ICLEAS, 9th International Congress on Life, Engineering, and Applied Sciences in a Changing World. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  7. Campilho, Raul; Thamizhmaran K; Ramesh R. Abstracts book of 9IBCLEAS, 9th International Baskent Congress on Life, Engineering, and Applied Sciences. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  8. Campilho, Raul; Thamizhmaran K; Moreira RDF. Abstracts book of 4IACLEAS, 4th International Artemis Congress on Life, Engineering, and Applied Sciences. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  9. Campilho, Raul; Ramesh R. Abstracts book of 8INYARC, 8th International New York Academic Research Congress on Life, Engineering and Applied Sciences. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  10. Campilho, Raul; Thamizhmaran K. Abstracts book of 10ICLEAS, 10th International Congress on Life, Engineering, and Applied Sciences in a Changing World. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  11. Silva FJG; Pereira AB; Campilho, Raul. Flexible automation and intelligent manufacturing: Establishing bridges for more sustainable manufacturing systems - Proceedings of FAIM 2023. Heidelberg: Springer. 2023.
    Published • Editor
  12. Campilho, Raul; Tur E. Advances in engineering and environmental sciences. Gaziantepe, Turkey: Özgür Publications. 2023.
    Published • Editor
  13. Campilho, Raul; Silva FJG. Industrial Process Improvement by Automation and Robotics. Basel, Switzerland: MDPI. 2023.
    Published • Editor
  14. Campilho, Raul. Design of adhesive bonded joints. Basel, Switzerland: MDPI. 2023.
    Published • Editor
  15. Campilho, Raul; Thamizhmaran K. Abstracts book of 11ICLEAS, 11th International Congress on Life, Engineering, and Applied Sciences in a Changing World. Istambul, Turkey: BZT Academy Publishing House. 2023.
    Published • Editor
  16. Campilho, Raul; Bildirici N.; Ontunc K.. Abstracts book of IACCS-VI, International Asian Congress on Contemporary Sciences-VI. Golbasi, Turkey: Iksad Publications. 2022.
    Published • Editor
  17. Campilho, Raul; Ahanchi P; Agayev RO. Abstracts book of 11IISRC, 11th International Istanbul Scientific Research Congress. Istambul, Turkey: BZT Academy Publishing House. 2022.
    Published • Editor
  18. Campilho, Raul. Abstracts book of 6INYARC, 6th International New York Academic Research Congress. Istambul, Turkey: BZT Academy Publishing House. 2022.
    Published • Editor
  19. Campilho, Raul; Thamizhmaran K. Abstracts book of 3IACLSHSS, 3rd International Azerbaijan Academic Research Congress on Life, Social, and Health Sciences. Istambul, Turkey: BZT Academy Publishing House. 2022.
    Published • Editor
  20. Campilho, Raul; Moreira RDF. Abstracts book of 2IACLSHSS, 2nd International Artemis Congress on Life, Social, Health, and Sports Sciences. Istambul, Turkey: BZT Academy Publishing House. 2022.
    Published • Editor
  21. Campilho, R.D.S.G.. Strength prediction of adhesively-bonded joints. Boca Raton, United States: CRC Press, Taylor & Francis. 2017.
    Published • Editor
  22. Campilho, R.D.S.G.. Natural fibre composites. Boca Raton, United States: CRC Press, Taylor & Francis. 2016.
    Published • Editor
Journal article
  1. Tiago F. R. Ribeiro; Raul D. S. G. Campilho; Ricardo F. R. Pinto; Ricardo J. B. Rocha. "Scarf Adhesive Bonding of 3D-Printed Polymer Structures". Journal of Manufacturing and Materials Processing (2025): https://doi.org/10.3390/jmmp9040115.
    10.3390/jmmp9040115
  2. Luís Koch; Francisco José Gomes da Silva; Raul Duarte Salgueiral Gomes Campilho; José Carlos Vieira de Sá; Rafael Resende Lucas; Rita de Cássia Mendonça Sales-Contini. "Mitigation strategies for waste elimination and cost reduction in the manufacture of Bowden cables". The International Journal of Advanced Manufacturing Technology (2025): https://doi.org/10.1007/s00170-025-15367-4.
    10.1007/s00170-025-15367-4
  3. M.A. Errahmane; M. Benyettou; K. Madani; L. Rezgani; H. Amin; S.C. Djebbar; M. Belhouari; R.D.S.G. Campliho; X. Feaugas. "Numerical and experimental analysis of the performance of the metal patch compared to the composite patch under aging conditions in water immersion". International Journal of Adhesion and Adhesives (2025): https://doi.org/10.1016/j.ijadhadh.2025.103943.
    10.1016/j.ijadhadh.2025.103943
  4. M. Benyettou; K. Madani; S.C. Djebbar; H. Amin; M. Belhouari; M. Elajrami; X. Feaugas; R.D.S.G. Campilho. "Analysis of load-displacement curves of an adhesive-reinforced composite patch repaired plate using the combination of XFEM and CZM techniques". International Journal of Adhesion and Adhesives (2025): https://doi.org/10.1016/j.ijadhadh.2024.103885.
    10.1016/j.ijadhadh.2024.103885
  5. Amin Houari; Kouider Madani; Mohamed Belhouari; Salah Amroune; Stéphane Cohendoz; Bruno Preaudeau; Xavier Feaugas; Raul DSG. Campilho. "Prediction of mass adhesive damage based on the Rousselier model: Experimental and numerical analysis". International Journal of Adhesion and Adhesives (2025): https://doi.org/10.1016/j.ijadhadh.2024.103852.
    10.1016/j.ijadhadh.2024.103852
  6. P. M. S. Ramalho; R. D. S. G. Campilho; F. J. G. Silva; A. F. V. Pedroso; R. C. M. Sales-Contini. "Productivity improvement of control cable manufacturing machine for the automotive industry". Mechanics Based Design of Structures and Machines (2024): https://doi.org/10.1080/15397734.2024.2349903.
    10.1080/15397734.2024.2349903
  7. R. D. S. G. Campilho; H. M. B. Lemos; F. J. G. Silva; R. P. Martinho; A. F. V. Pedroso. "Lifespan increase of electrical terminal crimping punches for the automotive industry". Mechanics Based Design of Structures and Machines (2024): https://doi.org/10.1080/15397734.2024.2345368.
    10.1080/15397734.2024.2345368
  8. João Pedro Madureira Pinto; Raul Duarte Salgueiral Gomes Campilho; Francisco José Gomes da Silva. "Automating the manufacturing process of control cables for the automotive components industry". The International Journal of Advanced Manufacturing Technology (2024): https://doi.org/10.1007/s00170-024-14844-6.
    10.1007/s00170-024-14844-6
  9. Anusha Peyyala; M. Naga Swapna Sri; Dr V.V.Venu Madhav; Ch. Sri Chaitanya; V.V. Spandana; KULDEEP KUMAR SAXENA; Dalael Saad Abdul-Zahra; et al. "RETRACTED: Anusha et al. Dynamics of MHD Convection of Walters B Viscoelastic Fluid through an Accelerating Permeable Surface Using the Soret–Dufour Mechanism. Appl. Sci. 2022, 12, 9431". Applied Sciences (2024): https://www.mdpi.com/2076-3417/15/1/115.
    10.3390/app15010115
  10. Amin Houari; Madani Kouider; Alper Polat; Salah Amroune; Barhm Abdullah Mohamad; Ahmed Chellil; Raul Campilho. "Effect of repair patch nature on J-integral reduction in notched plates". International Journal of Structural Integrity (2024): https://doi.org/10.1108/IJSI-06-2024-0086.
    10.1108/IJSI-06-2024-0086
  11. Pedro M. P. Curralo; Raul D. S. G. Campilho; Joaquim A. P. Pereira; Francisco J. G. Silva. "Design of Connector Assembly Equipment for the Automotive Industry". Machines (2024): https://doi.org/10.3390/machines12100731.
    10.3390/machines12100731
  12. Abdelkrim Merah; Amin Houari; Kouider Madani; Mohamed Belhouari; Salah Amroune; Ahmed Chellil; Cherif Zineelabidine Yahia; Raul D.S.G. Campilho. "Experimental Investigation Into the Tensile Strength Post-Repair on Damaged Aluminium 2024 -T3 Plates Using Hybrid Bonding/Riveting". Acta Mechanica et Automatica (2024): https://doi.org/10.2478/ama-2024-0055.
    10.2478/ama-2024-0055
  13. Aicha Metehri; Kouider Madani; Raul D.S.G. Campilho. "Numerical analysis of the geometrical modifications effects on the tensile strength of bonded single-lap joints". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2024.103814.
    10.1016/j.ijadhadh.2024.103814
  14. A. J. A. Vieira; R. D. S. G. Campilho; K. Madani. "Statistical analysis of adhesive rod-tube joints under tensile stress for structural applications". Journal of the Brazilian Society of Mechanical Sciences and Engineering (2024): https://doi.org/10.1007/s40430-024-05146-9.
    10.1007/s40430-024-05146-9
  15. Pedro Castro-Martins; Luís Pinto-Coelho; Raul D. S. G. Campilho. "Calibration and Modeling of the Semmes–Weinstein Monofilament for Diabetic Foot Management". Bioengineering (2024): https://doi.org/10.3390/bioengineering11090886.
    10.3390/bioengineering11090886
  16. T. F. R. Ribeiro; R. D. S. G. Campilho; R. F. R. Pinto; R. J. B. Rocha. "Structural behaviour of adhesive bonds in 3D printed adherends". Journal of Adhesion Science and Technology (2024): https://doi.org/10.1080/01694243.2024.2391012.
    10.1080/01694243.2024.2391012
  17. André Lima Faria; Campilho R.D.S.G.. "Numerical Evaluation of Hydroformed Tubular Adhesive Joints under Tensile Loads". Modelling (2024): https://www.mdpi.com/2673-3951/5/3/52.
    10.3390/modelling5030052
  18. José Luís Torres Alves Pereira; Raul Duarte Salgueiral Gomes Campilho; Francisco José Gomes da Silva. "Process improvement in Zamak injection machines for automotive component fabrication". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2024): https://doi.org/10.1177/09544062241262962.
    10.1177/09544062241262962
  19. Raul Campilho. "Experimental Testing, Manufacturing and Numerical Modeling of Composite and Sandwich Structures". Materials (2024): https://doi.org/10.3390/ma17143468.
    10.3390/ma17143468
  20. André F. V. Pedroso; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; Arnaldo G. Pinto; Renato R. Moreira. "A Computational Framework for Enhancing Industrial Operations and Electric Network Management: A Case Study". Technologies (2024): https://doi.org/10.3390/technologies12060091.
    10.3390/technologies12060091
  21. André F. V. Pedroso; Naiara P. V. Sebbe; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; Rúben D. F. S. Costa; Marta L. S. Barbosa; Francisca R. Nogueira. "A Concise Review on Materials for Injection Moulds and Their Conventional and Non-Conventional Machining Processes". Machines (2024): https://doi.org/10.3390/machines12040255.
    10.3390/machines12040255
  22. André F. V. Pedroso; Naiara P. V. Sebbe; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; Rui P. Martinho; Rafaela B. Casais. "An In-Depth Exploration of Unconventional Machining Techniques for INCONEL® Alloys". Materials (2024): https://doi.org/10.3390/ma17051197.
    10.3390/ma17051197
  23. André F. V. Pedroso; Naiara P. V. Sebbe; Rúben D. F. S. Costa; Marta L. S. Barbosa; Rita C. M. Sales-Contini; Francisco J. G. Silva; Raul D. S. G. Campilho; Abílio M. P. de Jesus. "INCONEL® Alloy Machining and Tool Wear Finite Element Analysis Assessment: An Extended Review". Journal of Manufacturing and Materials Processing (2024): https://doi.org/10.3390/jmmp8010037.
    10.3390/jmmp8010037
  24. L.A.R. Gomes; R.D.S.G. Campilho; J.P.A. Valente; M.J.R. Queirós; K. Madani. "Impact loading analysis of double-lap composite bonded joints". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2023.103547.
    10.1016/j.ijadhadh.2023.103547
  25. Chaudhari, Rakesh; Rehman, Inam Ur; Khanna, Sakshum; Patel, Vivek K.; Vora, Jay; Prakash, Chander; Campilho, Raul Duarte Salgueiral Gomes; et al. "A parametric study with experimental investigations of expanded graphite on performance measure of EDM process of Ni55.8Ti SMA". Alexandria Engineering Journal 87 (2024): 164-174. http://dx.doi.org/10.1016/j.aej.2023.12.013.
    10.1016/j.aej.2023.12.013
  26. Campilho, Raul. "Advances in testing and numerical modelling of composite materials". PriMera Scientific Engineering 4 (2024): 1-2.
    Published • 10.56831/PSEN-04-096
  27. Raul D. S. G. Campilho. "Advances in the Experimentation and Numerical Modeling of Material Joining Processes". Materials (2023): https://doi.org/10.3390/ma17010130.
    10.3390/ma17010130
  28. Francisca R. Nogueira; André F. V. Pedroso; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; Naiara P. V. Sebbe; Rafaela C. B. Casais. "A Comparative Study on the Wear Mechanisms of Uncoated and TiAlTaN-Coated Tools Used in Machining AMPCO® Alloy". Coatings (2023): https://doi.org/10.3390/coatings14010004.
    10.3390/coatings14010004
  29. Raul D. S. G. Campilho. "Design of Adhesive Bonded Joints". Processes (2023): https://doi.org/10.3390/pr11123369.
    10.3390/pr11123369
  30. Luís D. C. Ramalho; Isidro J. Sánchez-Arce; Diogo C. Gonçalves; Raul D. S. G. Campilho; Jorge Belinha. "Free Vibration Parametric Study of a Double Lap Joint Using the Radial Point Interpolation Method". International Journal of Applied Mechanics (2023): https://doi.org/10.1142/S1758825123500886.
    10.1142/S1758825123500886
  31. Ricardo BP Barros; Raul DSG Campilho; Isidro J Sánchez-Arce; João MM Dionísio; Kouider Madani. "Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023): https://doi.org/10.1177/14644207221140296.
    10.1177/14644207221140296
  32. Carvalho, D. F. T.; Campilho, R. D. S. G.; Vargas, A. S.; Moreira, R. D. F.; Madani, K.. "Parametric cohesive zone analysis of bi-adhesive single-step joints". SN Applied Sciences 5 12 (2023): http://dx.doi.org/10.1007/s42452-023-05586-3.
    10.1007/s42452-023-05586-3
  33. Raul D. S. G. Campilho; Francisco J. G. Silva. "Industrial Process Improvement by Automation and Robotics". Machines (2023): https://doi.org/10.3390/machines11111011.
    10.3390/machines11111011
  34. Campilho, Raul. "Academia Materials Science: Advances and innovation in all topics of materials science". Academia Materials Science (2023): http://dx.doi.org/10.20935/acadmatsci6148.
    10.20935/acadmatsci6148
  35. Eduardo Eiras; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; André F. V. Pedroso; Naiara P. V. Sebbe. "A Novel Fully Automatic Concept to Produce First Subset of Bowden Cables, Improving Productivity, Flexibility, and Safety". Machines (2023): https://doi.org/10.3390/machines11110992.
    10.3390/machines11110992
  36. P.A.R. Ferreira; R.D.S.G. Campilho; I.J. Sánchez Arce; D.C. Gonçalves; C. Prakash. "Static strength prediction of curved composite joints under internal pressure". The Journal of Adhesion (2023): https://doi.org/10.1080/00218464.2023.2174434.
    10.1080/00218464.2023.2174434
  37. Ramalho, Luís D.C.; Sánchez-Arce, Isidro J.; Gonçalves, Diogo C.; Campilho, Raul D.S.G.; Belinha, Jorge. "Strength prediction of a single lap joint under impact using meshless methods". Composites Part C: Open Access 12 (2023): 100384. http://dx.doi.org/10.1016/j.jcomc.2023.100384.
    10.1016/j.jcomc.2023.100384
  38. Gonçalves, D.C.; Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Simulation of mode II fracture propagation in adhesive joints using a meshless technique". Composites Part C: Open Access 12 (2023): 100385. http://dx.doi.org/10.1016/j.jcomc.2023.100385.
    10.1016/j.jcomc.2023.100385
  39. Houari, A.; Madani, K.; El Ajrami, M.; Belhouari, M.; Campilho, R. D. S. G.. "Analysis of the substrate nature on the strength of a single-lap joint". Journal of the Brazilian Society of Mechanical Sciences and Engineering 45 9 (2023): http://dx.doi.org/10.1007/s40430-023-04397-2.
    10.1007/s40430-023-04397-2
  40. Vitor H. P. Lopes; Raul D. S. G. Campilho; Paulo J. R. O. Nóvoa; Ricardo J. B. Rocha; Isidro J. Sánchez-Arce. "Experimental and cohesive zone modelling study on composite joining by co-curing and adhesive bonding for sheet moulding compound or carbon-fibre prepreg laminates". Journal of Adhesion Science and Technology (2023): https://doi.org/10.1080/01694243.2022.2081446.
    10.1080/01694243.2022.2081446
  41. Rahmouni, Faouzi; Elajrami, Mohamed; Madani, Kouider; Campilho, Raul D.S.G.. "Isogeometric analysis of stress concentrations and failure strength in composite plates with circular holes using RHT-splines". European Journal of Mechanics - A/Solids 99 (2023): 104904. http://dx.doi.org/10.1016/j.euromechsol.2022.104904.
    10.1016/j.euromechsol.2022.104904
  42. J.P.M. Lopes; R.D.S.G. Campilho; M.A. Bellali; M.C. Baghdadi. "Design Concepts for Peel-Dominant Adhesive Joints in Aeronautic Applications". Journal of Research Updates in Polymer Science (2023): https://doi.org/10.6000/1929-5995.2023.12.03.
    10.6000/1929-5995.2023.12.03
  43. Pedro Pereira; Raul Campilho; Andry Pinto. "An Inverse Kinematics Approach for the Analysis and Active Control of a Four-UPR Motion-Compensated Platform for UAV–ASV Cooperation". Machines (2023): https://doi.org/10.3390/machines11040478.
    10.3390/machines11040478
  44. Manuel Gaspar; Francisco J. G. Silva; Arnaldo G. Pinto; Raul D. S. G. Campilho. "2D and 3D Wires Formability for Car Seats: A Novel Full-Automatic Equipment Concept towards High Productivity and Flexibility". Machines (2023): https://doi.org/10.3390/machines11030410.
    10.3390/machines11030410
  45. A. F. V. Pedroso; V. F. C. Sousa; N. P. V. Sebbe; F. J. G. Silva; R. D. S. G. Campilho; R. C. M. Sales-Contini; A. M. P. Jesus. "A Comprehensive Review on the Conventional and Non-Conventional Machining and Tool-Wear Mechanisms of INCONEL®". Metals (2023): https://doi.org/10.3390/met13030585.
    10.3390/met13030585
  46. Luís D.C. Ramalho; Isidro J. Sánchez-Arce; Diogo C. Gonçalves; Raul D.S.G. Campilho; Jorge Belinha. "Free vibration parametric study of a single lap joint using the Radial Point Interpolation Method". Composite Structures (2023): https://doi.org/10.1016/j.compstruct.2023.116668.
    10.1016/j.compstruct.2023.116668
  47. A.F.L. Macedo; R.D.S.G. Campilho; F.J.G. Silva; MA Bellali. "Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023): https://doi.org/10.1177/09544089221088262.
    10.1177/09544089221088262
  48. A.F.M.V. Silva; L.M.C. Peres; R.D.S.G. Campilho; R.J.B. Rocha; F.J.G. Silva. "Cohesive zone parametric analysis in the tensile impact strength of tubular adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023): https://doi.org/10.1177/09544089221088261.
    10.1177/09544089221088261
  49. Gonçalves, D.C.; Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "A meshless crack propagation algorithm extended to mixed-mode loading of adhesive joints". Composite Structures 305 (2023): 116502. http://dx.doi.org/10.1016/j.compstruct.2022.116502.
    10.1016/j.compstruct.2022.116502
  50. Belhouari, M.; Benkheira, A.; Madani, K.; Campilho, R. D. S. G.; Gong, X. L.. "Effect of Temperature on the Energy Release Rate Variation in Repaired Laminate Composites". Journal of Failure Analysis and Prevention 23 1 (2023): 420-435. http://dx.doi.org/10.1007/s11668-023-01594-y.
    10.1007/s11668-023-01594-y
  51. I. J. Sánchez-Arce; D. C. Gonçalves; L. D. C. Ramalho; R. D. S. G. Campilho; J. Belinha. "The Ogden model and the natural neighbour radial point interpolation method for hyperelastic analyses". Journal of the Brazilian Society of Mechanical Sciences and Engineering (2023): https://doi.org/10.1007/s40430-022-04001-z.
    10.1007/s40430-022-04001-z
  52. Gonçalves, D.C.; Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "A meshless analysis of mode I fracture propagation in adhesive joints with experimental validation". Engineering Analysis with Boundary Elements 146 (2023): 119-131. http://dx.doi.org/10.1016/j.enganabound.2022.10.010.
    10.1016/j.enganabound.2022.10.010
  53. Lopes, J.P.M.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Numerical evaluation of the adhesive effect on the peel strength of aluminum T-joints". Procedia Structural Integrity 47 (2023): 48-55. http://dx.doi.org/10.1016/j.prostr.2023.06.040.
    10.1016/j.prostr.2023.06.040
  54. Gomes, L.A.R.; Campilho, R.D.S.G.; Valente, J.P.A.. "Parametric analysis of double-lap composite adhesive joints under impact loads". Procedia Structural Integrity 47 (2023): 94-101. http://dx.doi.org/10.1016/j.prostr.2023.06.044.
    10.1016/j.prostr.2023.06.044
  55. Silva, J.E.S.M.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Moreira, R.D.F.. "Effect of adhesive type on the tensile behavior of tubular scarf adhesive joints". Procedia Structural Integrity 47 (2023): 70-79. http://dx.doi.org/10.1016/j.prostr.2023.06.042.
    10.1016/j.prostr.2023.06.042
  56. Nóbrega, J.B.S.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Nóvoa, P.J.R.O.. "Numerical estimation of the peel strength of adhesive joints via the floating roller peel test". Procedia Structural Integrity 47 (2023): 408-416. http://dx.doi.org/10.1016/j.prostr.2023.07.084.
    10.1016/j.prostr.2023.07.084
  57. Gonçalves LS; Campilho, Raul; Prakash C. "Development of quality assurance system in the automotive industry". Advances in Science and Technology 132 (2023): 43-52.
    Published • 10.4028/p-Rci2nA
  58. Pereira PJPD; Campilho, Raul; Pereira JPGT; Moreira LCF; Prakash C. "Design and validation of gripper solution using soft robotics principles". Advances in Science and Technology 132 (2023): 109-119.
    Published • 10.4028/p-GKwdy2
  59. Barros, R.B.P.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Dionísio, J.M.M.; Madani, K.. "Experimental analysis on the mixed-mode fracture behavior of structural adhesives". Procedia Structural Integrity 51 (2023): 17-23. http://dx.doi.org/10.1016/j.prostr.2023.10.061.
    10.1016/j.prostr.2023.10.061
  60. Ferreira, P.A.R.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Gonçalves, D.C.. "Geometry effect on the static strength of curved composite bonded joints". Procedia Structural Integrity 51 (2023): 115-121. http://dx.doi.org/10.1016/j.prostr.2023.10.076.
    10.1016/j.prostr.2023.10.076
  61. Pedroso, A.F.V.; Campilho, R.D.S.G.; Rocha, R.J.B.; Gomes, M.A.. "Low Velocity Impact Evaluation of Self-Healing Sandwich Structures". Journal of Composites and Biodegradable Polymers 10 (2022): 43-51. http://dx.doi.org/10.12974/2311-8717.2022.10.04.
    10.12974/2311-8717.2022.10.04
  62. Luís F. R. Neves; Raul D. S. G. Campilho; Isidro J. Sánchez-Arce; Kouder Madani; Chander Prakash. "Numerical Modelling and Validation of Mixed-Mode Fracture Tests to Adhesive Joints Using J-Integral Concepts". Processes (2022): https://doi.org/10.3390/pr10122730.
    10.3390/pr10122730
  63. Vitor Santos; Vitor F. C. Sousa; Francisco J. G. Silva; João C. O. Matias; Rúben D. Costa; Arnaldo G. Pinto; Raul D. S. G. Campilho. "Applying the SMED Methodology to Tire Calibration Procedures". Systems (2022): https://doi.org/10.3390/systems10060239.
    10.3390/systems10060239
  64. I.J. Sánchez-Arce; L.D.C. Ramalho; D.C. Gonçalves; R.D.S.G. Campilho; J. Belinha. "Hyperelasticity and the radial point interpolation method via the Ogden model". Engineering Analysis with Boundary Elements (2022): https://doi.org/10.1016/j.enganabound.2022.08.035.
    10.1016/j.enganabound.2022.08.035
  65. Djebbar, S. Ch.; Madani, K.; El Ajrami, M.; Houari, A.; Kaddouri, N.; Mokhtari, M.; Feaugas, X.; Campilho, R.D.S.G.. "Substrate geometry effect on the strength of repaired plates: Combined XFEM and CZM approach". International Journal of Adhesion and Adhesives 119 (2022): 103252. http://dx.doi.org/10.1016/j.ijadhadh.2022.103252.
    10.1016/j.ijadhadh.2022.103252
  66. Gonçalves, D.C.; Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Fracture propagation based on meshless method and energy release rate criterion extended to the Double Cantilever Beam adhesive joint test". Theoretical and Applied Fracture Mechanics 122 (2022): 103577. http://dx.doi.org/10.1016/j.tafmec.2022.103577.
    10.1016/j.tafmec.2022.103577
  67. Barros, Ricardo BP; Campilho, Raul DSG; Sánchez-Arce, Isidro J; Dionísio, João MM; Madani, Kouider. "Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237 12 (2022): 2537-2550. http://dx.doi.org/10.1177/14644207221140296.
    10.1177/14644207221140296
  68. Raul Duarte Salgueiral Gomes Campilho; Kouider Madani; Chander Prakash. "Advanced Characterization of Adhesive Joints and Adhesives". Materials (2022): https://doi.org/10.3390/ma15207347.
    10.3390/ma15207347
  69. Saurabh Shah; Anand Joshi; Kamlesh Chauhan; Ankit Oza; Chander Prakash; Raul Duarte Salgueiral Gomes Campilho; Sandeep Kumar. "Feasibility Analysis of Machining Cobalt-Chromium Alloy (Stellite-6) Using TiN Coated Binary Inserts". Materials (2022): https://doi.org/10.3390/ma15207294.
    10.3390/ma15207294
  70. Vijay Patel; Unnati Joshi; Anand Joshi; Ankit D. Oza; Chander Prakash; Emanoil Linul; Raul Duarte Salgueiral Gomes Campilho; Sandeep Kumar; Kuldeep Kumar Saxena. "Strength Evaluation of Functionalized MWCNT-Reinforced Polymer Nanocomposites Synthesized Using a 3D Mixing Approach". Materials (2022): https://doi.org/10.3390/ma15207263.
    10.3390/ma15207263
  71. Jorge Manuel Moreira Vieira; Raul Duarte Salgueiral Gomes Campilho; Francisco José Gomes da Silva; Isidro de Jesús Sánchez-Arce. "Development of a rotation and lifting system for pallet rotary tables". The International Journal of Advanced Manufacturing Technology (2022): https://doi.org/10.1007/s00170-022-09881-y.
    10.1007/s00170-022-09881-y
  72. Ramalho, L.D.C.; Sánchez-Arce, Isidro J.; Gonçalves, Diogo C.; Belinha, J.; Campilho, R.D.S.G.. "Numerical analysis of the dynamic behaviour of adhesive joints: A review". International Journal of Adhesion and Adhesives 118 (2022): 103219. http://dx.doi.org/10.1016/j.ijadhadh.2022.103219.
    10.1016/j.ijadhadh.2022.103219
  73. José L. T. A. Pereira; Raul D. S. G. Campilho; Francisco J. G. Silva; Isidro J. Sánchez-Arce; Chander Prakash; Dharam Buddhi. "Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive Industry". Processes (2022): https://doi.org/10.3390/pr10101953.
    10.3390/pr10101953
  74. Rúben Costa; Vitor Sousa; Francisco J. G. Silva; Raul Campilho; José C. Sá; Arnaldo Pinto; João Pereira. "Increasing the Sustainability of Manufacturing Processes in Plastic Injection: Recovering Out-Of-Service Robots to Eliminate Manual Assembly Operations". Sustainability (2022): https://doi.org/10.3390/su141912300.
    10.3390/su141912300
  75. Rúben Costa; Vitor F. C. Sousa; Francisco J. G. Silva; Raul Campilho; Arnaldo G. Pinto; Luís P. Ferreira; Rui Soares. "A Novel Robotic Manipulator Concept for Managing the Winding and Extraction of Yarn Coils". Machines (2022): https://doi.org/10.3390/machines10100857.
    10.3390/machines10100857
  76. André F. G. Barbosa; Raul D. S. G. Campilho; Francisco J. G. Silva; Isidro J. Sánchez-Arce; Chander Prakash; Dharam Buddhi. "Design of a Spiral Double-Cutting Machine for an Automotive Bowden Cable Assembly Line". Machines (2022): https://doi.org/10.3390/machines10090811.
    10.3390/machines10090811
  77. J. D. C. da Costa; R. D. S. G. Campilho; F. J. G. Silva; I. J. Sánchez-Arce. "Design of Buried Equipment for the Collection of Urban Solid Waste". Journal of Testing and Evaluation (2022): https://doi.org/10.1520/JTE20210672.
    10.1520/JTE20210672
  78. Diogo Vieira; Francisco J. G. Silva; Raul D. S. G. Campilho; Vitor F. C. Sousa; Luís P. Ferreira; José C. Sá; Marlene Brito. "Automating Equipment towards Industry 4.0: A New Concept for a Transfer System of Lengthy and Low-Stiffness Products for Automobiles". Journal of Testing and Evaluation (2022): https://doi.org/10.1520/JTE20210721.
    10.1520/JTE20210721
  79. F. J. G. Silva; R. D. S. G. Campilho; V. F. C. Sousa; L. F. P. Coelho; L. P. Ferreira; M. T. Pereira; J. Matos. "A New Concept of Jig Rotary Holder System for 3-Axis CNC Milling Machine Operated by the Main Machine Control". Journal of Testing and Evaluation (2022): https://doi.org/10.1520/JTE20210723.
    10.1520/JTE20210723
  80. Anusha Peyyala; M. Naga Swapna Sri; V.V. Venu Madhav; Ch. Sri Chaitanya; V.V. Spandana; KULDEEP KUMAR SAXENA; Dalael Saad Abdul-Zahra; et al. "Dynamics of MHD Convection of Walters B Viscoelastic Fluid through an Accelerating Permeable Surface Using the Soret–Dufour Mechanism". Applied Sciences (2022): https://www.mdpi.com/2076-3417/12/19/9431.
    10.3390/app12199431
  81. Rashi Tyagi; Amitava Mandal; Alok Kumar Das; Ashutosh Tripathi; Dr. Chander Prakash; Campilho R.D.S.G.; KULDEEP KUMAR SAXENA. "Electrical Discharge Coating a Potential Surface Engineering Technique: A State of the Art". Processes (2022): https://www.mdpi.com/2227-9717/10/10/1971.
    10.3390/pr10101971
  82. Vieira, Jorge Manuel Moreira; Campilho, Raul Duarte Salgueiral Gomes; da Silva, Francisco José Gomes; de Jesús Sánchez-Arce, Isidro. "Development of a rotation and lifting system for pallet rotary tables". The International Journal of Advanced Manufacturing Technology 122 11-12 (2022): 4321-4339. http://dx.doi.org/10.1007/s00170-022-09881-y.
    10.1007/s00170-022-09881-y
  83. R Penne; FJG Silva; RDSG Campilho; G Santos; VFC Sousa; LP Ferreira; JC Sá; MT Pereira. "A new approach to increase the environmental sustainability of the discharging process in the over-injection of conduits for bowden cables using automation". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022): https://doi.org/10.1177/09544062221087547.
    10.1177/09544062221087547
  84. J. A. P. Pereira; R. D. S. G. Campilho; F. J. G. Silva; I. J. Sánchez-Arce. "Robotized cell design for part assembly in the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022): https://doi.org/10.1177/09544062221082860.
    10.1177/09544062221082860
  85. Lopes, Vitor H. P.; Campilho, Raul D. S. G.; Nóvoa, Paulo J. R. O.; Rocha, Ricardo J. B.; Sánchez-Arce, Isidro J.. "Experimental and cohesive zone modelling study on composite joining by co-curing and adhesive bonding for sheet moulding compound or carbon-fibre prepreg laminates". Journal of Adhesion Science and Technology 37 9 (2022): 1593-1613. http://dx.doi.org/10.1080/01694243.2022.2081446.
    10.1080/01694243.2022.2081446
  86. Rahmouni, Faouzi; Elajrami, Mohamed; Madani, Kouider; Campilho, RDSG. "Isogeometric analysis based on non-uniform rational B-splines technology of stress and failure strength in inter-ply hybrid laminated composite". Journal of Composite Materials 56 18 (2022): 2921-2932. http://dx.doi.org/10.1177/00219983221105313.
    10.1177/00219983221105313
  87. F. J. G. Silva; Vitor F. C. Sousa; Campilho R.D.S.G.; Ricardo Alexandre. "Wear Behavior of Coated Tools When Milling S32101 Duplex Stainless Steel". Materials Proceedings (2022): https://www.mdpi.com/2673-4605/8/1/45.
    10.3390/materproc2022008045
  88. Vitor Fernando Crespim Sousa; Francisco José Gomes da Silva; Raul Duarte Salgueiral Gomes Campilho; Arnaldo Guedes Pinto; Luís Pinto Ferreira; Nuno Martins. "Developing a Novel Fully Automated Concept to Produce Bowden Cables for the Automotive Industry". Machines 10 5 (2022): 290-290. https://doi.org/10.3390/machines10050290.
    10.3390/machines10050290
  89. Gonçalves, D.C.; Lopes, J.D.F.; Campilho, R.D.S.G.; Belinha, J.. "Topology optimization using a natural neighbour meshless method combined with a bi-directional evolutionary algorithm". Mathematics and Computers in Simulation 194 (2022): 308-328. http://dx.doi.org/10.1016/j.matcom.2021.11.021.
    Published • 10.1016/j.matcom.2021.11.021
  90. Ramalho, L.D.C.; Dionísio, J.M.M.; Sánchez-Arce, I.J.; Campilho, R.D.S.G.; Belinha, J.. "Analysis of stress singularity in adhesive joints using meshless methods". Engineering Analysis with Boundary Elements 137 (2022): 29-40. http://dx.doi.org/10.1016/j.enganabound.2022.01.012.
    Published • 10.1016/j.enganabound.2022.01.012
  91. Pedro Nuno de Almeida Arrojado da Silva Pereira; Raul Duarte Salgueiral Gomes Campilho; Andry Maykol Gomes Pinto. "Application of a Design for Excellence Methodology for a Wireless Charger Housing in Underwater Environments". Machines 10 4 (2022): 232-232. https://doi.org/10.3390/machines10040232.
    10.3390/machines10040232
  92. Macedo, A.F.L.; Campilho, R.D.S.G.; Silva, F.J.G.; Bellali, MA. "Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237 1 (2022): 14-25. http://dx.doi.org/10.1177/09544089221088262.
    10.1177/09544089221088262
  93. Nunes, DM; Campilho, RDSG; Silva, FJG. "Design of a transfer system for the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022): 095440892210800. http://dx.doi.org/10.1177/09544089221080042.
    Published • 10.1177/09544089221080042
  94. Vieira, Diogo; Silva, Francisco J. G.; Campilho, Raul D. S. G.; Sousa, Vitor F. C.; Ferreira, Luís P.; Sá, José C.; Brito, Marlene. "Automating Equipment towards Industry 4.0: A New Concept for a Transfer System of Lengthy and Low-Stiffness Products for Automobiles". Journal of Testing and Evaluation 50 5 (2022): 20210721. http://dx.doi.org/10.1520/jte20210721.
    Published • 10.1520/jte20210721
  95. da Costa, J. D. C.; Campilho, R. D. S. G.; Silva, F. J. G.; Sánchez-Arce, I. J.. "Design of Buried Equipment for the Collection of Urban Solid Waste". Journal of Testing and Evaluation 50 5 (2022): 20210672. http://dx.doi.org/10.1520/jte20210672.
    Published • 10.1520/jte20210672
  96. Gonçalves, Diogo Costa; Lopes, Joel; Campilho, Raul; Belinha, Jorge. "An evolutionary structural optimization algorithm for the analysis of light automobile parts using a meshless technique". Engineering Computations (2022): http://dx.doi.org/10.1108/ec-05-2021-0271.
    Published • 10.1108/ec-05-2021-0271
  97. Gonçalves, D. C.; Lopes, J. D. F.; Campilho, R. D. S. G.; Belinha, J.. "The Radial Point Interpolation Method combined with a bi-directional structural topology optimization algorithm". Engineering with Computers (2022): http://dx.doi.org/10.1007/s00366-021-01556-8.
    Published • 10.1007/s00366-021-01556-8
  98. Gonçalves, Diogo C.; Sánchez-Arce, Isidro J.; Ramalho, Luís D. C.; Campilho, Raul D. S. G.; Belinha, Jorge. "Introductory application of a natural neighbour meshless elastic formulation to double-lap adhesive joints". Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 2 (2022): http://dx.doi.org/10.1007/s40430-021-03355-0.
    Published • 10.1007/s40430-021-03355-0
  99. Gonçalves, D. C.; Lopes, J. D. F.; Campilho, R. D. S. G.; Belinha, J.. "Topology optimization of light structures using the natural neighbour radial point interpolation method". Meccanica 57 3 (2022): 659-676. http://dx.doi.org/10.1007/s11012-021-01459-4.
    Published • 10.1007/s11012-021-01459-4
  100. Ramalho, L.D.C.; Dionísio, J.M.M.; Sánchez-Arce, I.J.; Campilho, R.D.S.G.; Belinha, J.. "Meshless analysis of the stress singularity in composite adhesive joints". Composite Structures 280 (2022): 114910. http://dx.doi.org/10.1016/j.compstruct.2021.114910.
    Published • 10.1016/j.compstruct.2021.114910
  101. Tojal, M.C.; Silva, F.J.G.; Campilho, R.D.S.G.; Pinto, A.M.G.; Ferreira, L.P.. "Case-based product development of a high-pressure die casting injection subset using design science research". FME Transactions (2022):
    Published
  102. Lopes, J.P.M.; Campilho, R.G.S.G.; Rocha, R.J.B.; Silva, F.J.G.. "Geometrical parameter study of adhesively-bonded T-joints by cohesive models". Procedia Structural Integrity 37 (2022): 714-721. http://dx.doi.org/10.1016/j.prostr.2022.02.001.
    10.1016/j.prostr.2022.02.001
  103. Pereira, J.P.O.; Campilho, R.G.S.G.; Nóvoa, P.J.R.O.; Silva, F.J.G.; Gonçalves, D.C.. "Adherend effect on the peel strength of a brittle adhesive". Procedia Structural Integrity 37 (2022): 722-729. http://dx.doi.org/10.1016/j.prostr.2022.02.002.
    10.1016/j.prostr.2022.02.002
  104. Pereira, T.F.C.; Campilho, R.D.S.G.; Rocha, R.J.B.; Sánchez-Arce, I.J.. "Cohesive zone parameter influence on the impact strength of composite adhesive joints". Procedia Structural Integrity 41 (2022): 14-23. http://dx.doi.org/10.1016/j.prostr.2022.05.004.
    10.1016/j.prostr.2022.05.004
  105. Carvalho, P.M.D.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Rocha, R.J.B.; Soares, A.R.F.. "Adhesively-bonded T-joint cohesive zone analysis using dual-adhesives". Procedia Structural Integrity 41 (2022): 24-35. http://dx.doi.org/10.1016/j.prostr.2022.05.005.
    10.1016/j.prostr.2022.05.005
  106. Oliveira, T.J.S.; Campilho, R.D.S.G.; Cardoso, M.G.; Sánchez-Arce, I.J.. "Cohesive zone analysis of torsional tubular joints with an epoxy adhesive". Procedia Structural Integrity 41 (2022): 72-81. http://dx.doi.org/10.1016/j.prostr.2022.05.009.
    10.1016/j.prostr.2022.05.009
  107. Soares, A.R.F.; Campilho, R.D.S.G.; Chaves, F.J.P.; Sánchez-Arce, I.J.; Fecheira, J.M.F.S.; Silva, F.J.G.; Carvalho, P.M.D.. "Design and validation of mixed-mode device for fracture toughness analysis of adhesive joints". Procedia Structural Integrity 41 (2022): 48-59. http://dx.doi.org/10.1016/j.prostr.2022.05.007.
    10.1016/j.prostr.2022.05.007
  108. Pinheiro, A.E.S.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I.J.. "Validation of theoretical models for the strength prediction of tubular adhesive joints". Procedia Structural Integrity 41 (2022): 60-71. http://dx.doi.org/10.1016/j.prostr.2022.05.008.
    10.1016/j.prostr.2022.05.008
  109. Silva, J.E.S.M.; Campilho, R.D.S.G.; Sánchez-Arce, I.J.; Moreira, R.D.F.. "Numerical evaluation of tensile-loaded tubular scarf adhesive joints". Procedia Structural Integrity 41 (2022): 36-47. http://dx.doi.org/10.1016/j.prostr.2022.05.006.
    10.1016/j.prostr.2022.05.006
  110. Silva FJG; Sousa VFC; Campilho, Raul; Alexandre R. "Wear behavior of coated tools when milling S32101 duplex stainless steel". Materials Proceedings 8 (2022): 45.
    Published • 10.3390/materproc2022008045
  111. Medjdoub SM; Madani K; Rezgani L; Mallarino S; Touzain S; Campilho, Raul. "Numerical analysis of the combined aging and fillet effect of the adhesive on the numerical behavior of a single lap joint of type Aluminum/Aluminum". Structural Engineering and Mechanics 83 (2022): 693-707.
    Published • https://doi.org/10.12989/sem.2022.83.5.693
  112. Kaddouri N; Madani K; Djebbar SCH; Belhouari M; Campilho, Raul. "Impact of bonding defect on the tensile response of a composite patch-repaired structure: Effect of the defect position and size". Structural Engineering and Mechanics 84 (2022): 799-811.
    Published • 10.12989/sem.2022.84.6.799
  113. Almeida, Fátima de; Sousa, Vitor F. C.; Silva, Francisco J. G.; Campilho, Raúl D. S. G.; Ferreira, Luís P.. "Development of a Novel Design Strategy for Moving Mechanisms Used in Multi-Material Plastic Injection Molds". Applied Sciences 11 24 (2021): 11805. http://dx.doi.org/10.3390/app112411805.
    Published • 10.3390/app112411805
  114. Vieira, Alexandre L. N.; Campilho, Raul D. S. G.; Silva, Francisco J. G.; Ferreira, Luís P.. "Increasing the Environmental Sustainability of an Over-Injection Line for the Automotive Component Industry". Sustainability 13 22 (2021): 12692. http://dx.doi.org/10.3390/su132212692.
    Published • 10.3390/su132212692
  115. Dionísio, J.M.M.; Ramalho, L.D.C.; Sánchez-Arce, I.J.; Campilho, R.D.S.G.; Belinha, J.. "Fracture mechanics approach to stress singularities in composite adhesive joints". Composite Structures 276 (2021): 114507. http://dx.doi.org/10.1016/j.compstruct.2021.114507.
    Published • 10.1016/j.compstruct.2021.114507
  116. Dionísio, J. M. M.; Ramalho, L. D. C.; Sánchez-Arce, I. J.; Campilho, R. D. S. G.; Belinha, J.. "Fracture mechanics approach to stress singularity in adhesive joints". International Journal of Fracture 232 1 (2021): 77-91. http://dx.doi.org/10.1007/s10704-021-00594-z.
    Published • 10.1007/s10704-021-00594-z
  117. Peres, L.M.C.; Arnaud, M.F.T.D.; Silva, A.F.M.V.; Campilho, R.D.S.G.; Machado, J.J.M.; Marques, E.A.S.; dos Reis, M.Q; Da Silva, L.F.M.. "Geometry and adhesive optimization of single-lap adhesive joints under impact". The Journal of Adhesion (2021): 1-27. http://dx.doi.org/10.1080/00218464.2021.1994404.
    Published • 10.1080/00218464.2021.1994404
  118. Oliveira, T J S; Campilho, R D S G; Cardoso, M G. "Three-dimensional numerical analysis of tubular adhesive joints under torsional loads". IOP Conference Series: Materials Science and Engineering 1193 1 (2021): 012082. http://dx.doi.org/10.1088/1757-899x/1193/1/012082.
    Published • 10.1088/1757-899x/1193/1/012082
  119. Sánchez, I J; Ramalho, L D C; Campilho, R D S G; Belinha, J. "Modelling adhesively-bonded T-joints by a meshless method". IOP Conference Series: Materials Science and Engineering 1193 1 (2021): 012083. http://dx.doi.org/10.1088/1757-899x/1193/1/012083.
    Published • 10.1088/1757-899x/1193/1/012083
  120. Resende, R.F.P.; Resende, B.F.P.; Sanchez Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Elasto-plastic adhesive joint design approach by a radial point interpolation meshless method". The Journal of Adhesion (2021): 1-27. http://dx.doi.org/10.1080/00218464.2021.1977633.
    Published • 10.1080/00218464.2021.1977633
  121. Silva, F. J. G.; Soares, M. R.; Ferreira, L. P.; Alves, A. C.; Brito, M.; Campilho, R. D. S. G.; Sousa, V. F. C.. "A Novel Automated System for the Handling of Car Seat Wires on Plastic Over-Injection Molding Machines". Machines 9 8 (2021): 141. http://dx.doi.org/10.3390/machines9080141.
    Published • 10.3390/machines9080141
  122. Ramalho, Luís D.C.; Sánchez-Arce, Isidro J.; Campilho, Raul D.S.G.; Belinha, Jorge. "Strength prediction of composite single lap joints using the critical longitudinal strain criterion and a meshless method". International Journal of Adhesion and Adhesives 108 (2021): 102884. http://dx.doi.org/10.1016/j.ijadhadh.2021.102884.
    Published • 10.1016/j.ijadhadh.2021.102884
  123. Oliveira, Pedro N.; Fonseca, Elza M. M.; Campilho, Raul D. S. G.; Piloto, Paulo A. G.. "Analytical Equations Applied to the Study of Steel Profiles under Fire According to Different Nominal Temperature-Time Curves". Mathematical and Computational Applications 26 2 (2021): 48. http://dx.doi.org/10.3390/mca26020048.
    Published • 10.3390/mca26020048
  124. Bellali, Mohammed Amine; Serier, Boualem; Mokhtari, Mohamed; Campilho, Raul D.S.G.; Lebon, Frederic; Fekirini, Hamida. "XFEM and CZM modeling to predict the repair damage by composite patch of aircraft structures: Debonding parameters". Composite Structures 266 (2021): 113805. http://dx.doi.org/10.1016/j.compstruct.2021.113805.
    Published • 10.1016/j.compstruct.2021.113805
  125. Silva, André; Silva, Francisco J.G.; Campilho, Raul D.S.G.; Neves, Pedro M.P.F.. "A new approach to temperature control in the extrusion process of composite tire products". Journal of Manufacturing Processes 65 (2021): 80-96. http://dx.doi.org/10.1016/j.jmapro.2021.03.022.
    Published • 10.1016/j.jmapro.2021.03.022
  126. Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Meshless analysis of substrate stiffness and its effect on metallic double-L joint strength and stress distributions". Engineering Analysis with Boundary Elements 125 (2021): 190-200. http://dx.doi.org/10.1016/j.enganabound.2021.01.019.
    Published • 10.1016/j.enganabound.2021.01.019
  127. Ramalho, Luís; D. S. G. Campilho, Raul; Belinha, Jorge; De Castro, Paulo M. S. T.. "Parametric Study of Fatigue Crack Growth in a Finite Plate". U.Porto Journal of Engineering 7 2 (2021): 22-30. http://dx.doi.org/10.24840/2183-6493_007.002_0004.
    Published • 10.24840/2183-6493_007.002_0004
  128. Ramalho, Luís D.C.; Sánchez-Arce, Isidro J.; Campilho, Raul D.S.G.; Belinha, Jorge. "Strength prediction of composite single lap joints using the radial point interpolation method". Composite Structures 259 (2021): 113228. http://dx.doi.org/10.1016/j.compstruct.2020.113228.
    10.1016/j.compstruct.2020.113228
  129. Santos, P.M.M.; Campilho, R.D.S.G.; Silva, F.J.G.. "A new concept of full-automated equipment for the manufacture of shirt collars and cuffs". Robotics and Computer-Integrated Manufacturing 67 (2021): 102023. http://dx.doi.org/10.1016/j.rcim.2020.102023.
    10.1016/j.rcim.2020.102023
  130. Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Material non-linearity in the numerical analysis of SLJ bonded with ductile adhesives: A meshless approach". International Journal of Adhesion and Adhesives 104 (2021): 102716. http://dx.doi.org/10.1016/j.ijadhadh.2020.102716.
    10.1016/j.ijadhadh.2020.102716
  131. Silva, J.; Silva, F.J.G.; Campilho, R.D.S.G.; Sá, J.C.; Ferreira, L.P.. "A model for productivity improvement on machining of components for stamping dies". International Journal of Industrial Engineering and Management 12 (2021): 85-101.
    Published
  132. Faria, N.M.S.; Campilho, Raul; Silva, F.J.G.; Ferreira, L.P.. "Concept and design of automated moving device for healthcare equipment". FME Transactions 49 3 (2021): 598-607. http://dx.doi.org/10.5937/fme2103598f.
    Published • 10.5937/fme2103598f
  133. Pinto, Gustavo; Silva, F.J.G.; Baptista, A.; Campilho, Raul; Viana, F.. "Investigations on the oxidation of Zn-coated steel cables". FME Transactions 49 3 (2021): 587-597. http://dx.doi.org/10.5937/fme2103587p.
    Published • 10.5937/fme2103587p
  134. Sousa, V.F.C.; Silva, F.J.G.; Ferreira, L.P.; Campilho, R.D.S.G.; Pereira, T.; Braga, E.. "Improving the design of nozzles used in zamak high-pressure die-casting process". FME Transactions 49 4 (2021): 1005-1013. http://dx.doi.org/10.5937/fme2104005s.
    Published • 10.5937/fme2104005s
  135. Vieira, A.L.N.; Campilho, R.D.S.G.; Silva, F.J.G.; Faria, N.M.S.; Ferreira, L.P.. "Design of a thermoplastic micro over injection machine for the automotive component industry". Procedia Manufacturing 55 (2021): 56-63. http://dx.doi.org/10.1016/j.promfg.2021.10.009.
    Published • 10.1016/j.promfg.2021.10.009
  136. Antunes, R.P.R.O.; Campilho, R.D.S.G.; Silva, F.J.G.; Vieira, A.L.N.. "Numerical validation of cohesive laws for adhesive layers with varying thickness in bonded structures". Procedia Manufacturing 55 (2021): 213-220. http://dx.doi.org/10.1016/j.promfg.2021.10.030.
    Published • 10.1016/j.promfg.2021.10.030
  137. Rosas, M.F.M.O.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Numerical analysis of geometrical modification combinations of the tensile strength of tubular adhesive joints". Procedia Structural Integrity 33 (2021): 115-125. http://dx.doi.org/10.1016/j.prostr.2021.10.016.
    Published • 10.1016/j.prostr.2021.10.016
  138. Resende, R.F.P.; Resende, B.F.P.; Sánchez-Arce, I.J.; Gonçalves, D.C.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Meshless approach to material plasticity in adhesive joints". Procedia Structural Integrity 33 (2021): 126-137. http://dx.doi.org/10.1016/j.prostr.2021.10.017.
    Published • 10.1016/j.prostr.2021.10.017
  139. Silva, A.F.M.V.; Peres, L.M.C.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Impact loading analysis of tubular adhesive joints". Procedia Structural Integrity 33 (2021): 138-148. http://dx.doi.org/10.1016/j.prostr.2021.10.018.
    Published • 10.1016/j.prostr.2021.10.018
  140. Sánchez-Arce, I.J.; Gonçalves, D.C.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Meshless and hyper-elastic implementation to analyse flexible adhesives". Procedia Structural Integrity 33 (2021): 149-158. http://dx.doi.org/10.1016/j.prostr.2021.10.019.
    Published • 10.1016/j.prostr.2021.10.019
  141. Brito, R.F.N.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I.J.; Silva, F.J.G.. "Composite stepped-lap adhesive joint analysis by cohesive zone modelling". Procedia Structural Integrity 33 (2021): 665-672. http://dx.doi.org/10.1016/j.prostr.2021.10.074.
    Published • 10.1016/j.prostr.2021.10.074
  142. Faria, R.V.F.; Campilho, R.D.S.G.; Gonçalves, P.J.A.; Rocha, R.J.B.; Sánchez-Arce, I.J.; Silva, F.J.G.. "Numerical analysis by XFEM of hybrid T-peel joints". Procedia Structural Integrity 33 (2021): 673-684. http://dx.doi.org/10.1016/j.prostr.2021.10.075.
    Published • 10.1016/j.prostr.2021.10.075
  143. Oliveira, Pedro N.; Fonseca, Elza M.M.; Campilho, Raul D.S.G.. "Easy Trends to Analyse Structural Profiles: Lumped Capacitance Vs Simplified Equation". International Journal of Safety and Security Engineering 10 5 (2020): 625-629. http://dx.doi.org/10.18280/ijsse.100506.
    Published • 10.18280/ijsse.100506
  144. Correia, J. M. C.; Campilho, R. D. S. G.; Rocha, R. J. B.; Liu, Y.; Ramalho, L. D. C.. "Parametric study of composite curved adhesive joints". The International Journal of Advanced Manufacturing Technology 111 9-10 (2020): 2957-2970. http://dx.doi.org/10.1007/s00170-020-06314-6.
    10.1007/s00170-020-06314-6
  145. Faria, R.V.F.; Campilho, R.D.S.G.; Gonçalves, P.J.A.; Rocha, R.J.B.. "Advanced numerical methods for the strength prediction of hybrid adhesively bonded T-peel joints". The Journal of Adhesion (2020): 1-26. http://dx.doi.org/10.1080/00218464.2020.1823840.
    10.1080/00218464.2020.1823840
  146. Brito, RFN; Campilho, RDSG; Moreira, RDF; Sánchez-Arce, IJ. "Material and adhesive effect in adhesively-bonded composite stepped-lap joints". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234 13 (2020): 1967-1979. http://dx.doi.org/10.1177/0954410020932014.
    10.1177/0954410020932014
  147. Ramalho, L.D.C.; Belinha, J.; Campilho, R.D.S.G.. "A New Crack Propagation Algorithm Combined with the Finite Element Method". Journal of Mechanics 36 4 (2020): 405-422. http://dx.doi.org/10.1017/jmech.2020.1.
    10.1017/jmech.2020.1
  148. Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Single lap joint strength prediction using the radial point interpolation method and the critical longitudinal strain criterion". Engineering Analysis with Boundary Elements 113 (2020): 268-276. http://dx.doi.org/10.1016/j.enganabound.2020.01.010.
    10.1016/j.enganabound.2020.01.010
  149. Loureiro, F.J.C.F.B.; Campilho, R.D.S.G.; Rocha, R.J.B.. "J-integral analysis of the mixed-mode fracture behaviour of composite bonded joints". The Journal of Adhesion 96 (2020): 321-344. https://doi.org/10.1080/00218464.2019.1667776.
    10.1080/00218464.2019.1667776
  150. J.J.G. Oliveira; R.D.S.G. Campilho; F.J.G. Silva; E.A.S. Marques; J.J.M. Machado; L.F.M. da Silva. "Adhesive thickness effects on the mixed-mode fracture toughness of bonded joints". The Journal of Adhesion 96 (2020): 300-320. https://doi.org/10.1080/00218464.2019.1681269.
    Published • 10.1080/00218464.2019.1681269
  151. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, Lucas F.M.. "Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling". International Journal of Adhesion and Adhesives 97 (2020): 102492. http://dx.doi.org/10.1016/j.ijadhadh.2019.102492.
    10.1016/j.ijadhadh.2019.102492
  152. CL Ferreira; RDSG Campilho; RDF Moreira. "Experimental and numerical analysis of dual-adhesive stepped-lap aluminum joints". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2020): https://doi.org/10.1177/0954408920905747.
    10.1177/0954408920905747
  153. JJM Machado; PDP Nunes; EAS Marques; RDSG Campilho; Lucas FM da Silva. "Numerical study of mode I fracture toughness of carbon-fibre-reinforced plastic under an impact load". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2020): 146442071987139-146442071987139. https://doi.org/10.1177/1464420719871390.
    10.1177/1464420719871390
  154. Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.; da Silva, L.F.M.. "Static strength prediction of adhesive joints: A review". International Journal of Adhesion and Adhesives 96 (2020): 102451. http://dx.doi.org/10.1016/j.ijadhadh.2019.102451.
    10.1016/j.ijadhadh.2019.102451
  155. Ramalho, L.D.C.; Belinha, J.; Campilho, R.D.S.G.. "A novel robust remeshing finite element technique for fracture propagation". International Journal of Computational Methods (2020):
    Accepted
  156. Loureiro, F.J.C.F.B.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Mixed-mode fracture toughness of a structural adhesive by the single-leg bending test". Procedia Structural Integrity 25 (2020): 63-70. http://dx.doi.org/10.1016/j.prostr.2020.04.010.
    10.1016/j.prostr.2020.04.010
  157. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Numerical modelling and experimental validation of step bonded joints". Procedia Structural Integrity 25 (2020): 71-78. http://dx.doi.org/10.1016/j.prostr.2020.04.011.
    10.1016/j.prostr.2020.04.011
  158. Ribeiro, J.P.S.M.B.; Campilho, Raul D.S.G.; Rocha, R.J.B.. "Mixed-mode evaluation of ductile adhesive joints by the single-leg bending test". Procedia Structural Integrity 28 (2020): 1106-1115. http://dx.doi.org/10.1016/j.prostr.2020.11.125.
    10.1016/j.prostr.2020.11.125
  159. Ferreira, C.L.; Campilho, R.D.S.G.; Moreira, R.D.F.. "Bonded structures improvement by the dual adhesive technique". Procedia Structural Integrity 28 (2020): 1116-1124. http://dx.doi.org/10.1016/j.prostr.2020.11.126.
    10.1016/j.prostr.2020.11.126
  160. Sánchez-Arce, I.J.; Ramalho, L.D.C.; Campilho, R.D.S.G.; Belinha, J.. "Analyzing single-lap joints bonded with a brittle adhesive by an elastic meshless method". Procedia Structural Integrity 28 (2020): 1084-1093. http://dx.doi.org/10.1016/j.prostr.2020.11.123.
    10.1016/j.prostr.2020.11.123
  161. Moreira, F.J.P.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Evaluation of T-joints in aluminium structures under different geometries". Procedia Manufacturing 51 (2020): 848-855. http://dx.doi.org/10.1016/j.promfg.2020.10.119.
    10.1016/j.promfg.2020.10.119
  162. Ferreira, J.A.M.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Numerical simulation of adhesively-bonded T-stiffeners by cohesive zone models". Procedia Manufacturing 51 (2020): 870-877. http://dx.doi.org/10.1016/j.promfg.2020.10.122.
    10.1016/j.promfg.2020.10.122
  163. Ramalho, L.D.C.; Sánchez-Arce, I.J.; Campilho, R.D.S.G.; Belinha, J.A.O.P.; Silva, F.J.G.. "Strength prediction and stress analysis of adhesively bonded composite joints using meshless methods". Procedia Manufacturing 51 (2020): 904-911. http://dx.doi.org/10.1016/j.promfg.2020.10.127.
    10.1016/j.promfg.2020.10.127
  164. Cardoso, M.G.; Pinto, J.E.C.; Campilho, R.D.S.G.; Nóvoa, P.J.R.O.; Silva, F.J.G.; Ramalho, L.D.C.. "A new structural two-component epoxy adhesive: Strength and fracture characterization". Procedia Manufacturing 51 (2020): 771-778. http://dx.doi.org/10.1016/j.promfg.2020.10.108.
    10.1016/j.promfg.2020.10.108
  165. Silva, André F.A.; Silva, F.J.G.; Campilho, R.D.S.G.; Neves, Pedro M.P.F.. "3D finite element analysis and optimization of cap ply production system in the tire industry". Procedia Manufacturing 51 (2020): 763-770. http://dx.doi.org/10.1016/j.promfg.2020.10.107.
    10.1016/j.promfg.2020.10.107
  166. Baptista, A.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, S.; Pinto, G.. "Applying DMADV on the industrialization of updated components in the automotive sector: a case study". Procedia Manufacturing 51 (2020): 1332-1339. http://dx.doi.org/10.1016/j.promfg.2020.10.186.
    10.1016/j.promfg.2020.10.186
  167. Ferreira, C.; Silva, F.J.G.; Campilho, R.D.S.G.; Fecheira, J.S.. "Study of the kinematics of a high-course steering system". Procedia Manufacturing 51 (2020): 164-170. http://dx.doi.org/10.1016/j.promfg.2020.10.024.
    10.1016/j.promfg.2020.10.024
  168. Figueiredo, D.; Silva, F.J.G.; Campilho, R.D.S.G.; Silva, A.; Pimentel, C.; Matias, J.C.O.. "A new concept of automated manufacturing process for wire rope terminals". Procedia Manufacturing 51 (2020): 431-437. http://dx.doi.org/10.1016/j.promfg.2020.10.061.
    10.1016/j.promfg.2020.10.061
  169. Freitas, F.; Silva, F.J.G.; Campilho, R.D.S.G.; Pimentel, C.; Godina, R.. "Development of a suitable project management approach for projects with parallel planning and execution". Procedia Manufacturing 51 (2020): 1544-1550. http://dx.doi.org/10.1016/j.promfg.2020.10.215.
    10.1016/j.promfg.2020.10.215
  170. Pinto, G.; Silva, F.J.G.; Baptista, A.; Fecheira, J.S.; Campilho, R.D.S.G.; Viana, F.. "Studying the ZnO formation in coated steel wire ropes for the automotive industry". Procedia Manufacturing 51 (2020): 912-919. http://dx.doi.org/10.1016/j.promfg.2020.10.128.
    10.1016/j.promfg.2020.10.128
  171. Silva, F.J.G.; Swertvaegher, G.; Campilho, R.D.S.G.; Ferreira, L.P.; Sá, J.C.. "Robotized solution for handling complex automotive parts in inspection and packing". Procedia Manufacturing 51 (2020): 156-163. http://dx.doi.org/10.1016/j.promfg.2020.10.023.
    10.1016/j.promfg.2020.10.023
  172. Rodrigues, H.; Silva, F.J.G.; Morgado, L.G.; Sá, J.C.; Ferreira, L.P.; Campilho, R.D.S.G.. "A novel computer application for scrap reporting and data management in the manufacturing of components for the automotive industry". Procedia Manufacturing 51 (2020): 1319-1326. http://dx.doi.org/10.1016/j.promfg.2020.10.184.
    10.1016/j.promfg.2020.10.184
  173. Martins, L.; Silva, F.J.G.; Pimentel, C.; Casais, R.B.; Campilho, R.D.S.G.. "Improving Preventive Maintenance Management in an Energy Solutions Company". Procedia Manufacturing 51 (2020): 1551-1558. http://dx.doi.org/10.1016/j.promfg.2020.10.216.
    10.1016/j.promfg.2020.10.216
  174. Vieira, A.M.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Sá, J.C.; Pereira, T.. "SMED methodology applied to the deep drawing process in the automotive industry". Procedia Manufacturing 51 (2020): 1416-1422. http://dx.doi.org/10.1016/j.promfg.2020.10.197.
    10.1016/j.promfg.2020.10.197
  175. Martins, Nuno; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.. "A novel concept of Bowden cables flexible and full-automated manufacturing process improving quality and productivity". Procedia Manufacturing 51 (2020): 438-445. http://dx.doi.org/10.1016/j.promfg.2020.10.062.
    10.1016/j.promfg.2020.10.062
  176. Lopes, R.; Silva, F.J.G.; Godina, R.; Campilho, R.; Dieguez, T.; Ferreira, L.P.; Baptista, A.. "Reducing scrap and improving an air conditioning pipe production line". Procedia Manufacturing 51 (2020): 1410-1415. http://dx.doi.org/10.1016/j.promfg.2020.10.196.
    10.1016/j.promfg.2020.10.196
  177. Costa, S.; Silva, F.J.G.; Campilho, R.D.S.G.; Pereira, T.. "Guidelines for Machine Tool Sensing and Smart Manufacturing Integration". Procedia Manufacturing 51 (2020): 251-257. http://dx.doi.org/10.1016/j.promfg.2020.10.036.
    10.1016/j.promfg.2020.10.036
  178. Ferreira, S.; Martins, L.; Silva, F.J.G.; Casais, R.B.; Campilho, R.D.S.G.; Sá, J.C.. "A novel approach to improve maintenance operations". Procedia Manufacturing 51 (2020): 1531-1537. http://dx.doi.org/10.1016/j.promfg.2020.10.213.
    10.1016/j.promfg.2020.10.213
  179. Sousa, V.; Silva, F.J.G.; Fecheira, J.S.; Campilho, R.D.S.G.; Vandermeulen, V.. "A Novel Modular Design of an Equipment to Produce “T”-Profiles by Laser Welding". Procedia Manufacturing 51 (2020): 446-453. http://dx.doi.org/10.1016/j.promfg.2020.10.063.
    10.1016/j.promfg.2020.10.063
  180. Dieguez, Teresa; Corcetti, L.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.. "How can technology on the automotive industry save the future?". Procedia Manufacturing 51 (2020): 1763-1772. http://dx.doi.org/10.1016/j.promfg.2020.10.245.
    10.1016/j.promfg.2020.10.245
  181. F. J. P. Moreira; R. D. S. G. Campilho. "Extended Finite Element Modelling of Adhesive Joints Under Peel Loads". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology 30 (2019): 13-20. https://doi.org/10.35219/awet.2019.02.
    10.35219/awet.2019.02
  182. I.J. Sánchez-Arce; L.D.C. Ramalho; R.D.S.G. Campilho; J. Belinha. "Evaluation of an elastic meshless formulation to adhesive joints’ strength prediction against established methods". Journal of Adhesion Science and Technology (2019): https://doi.org/10.1080/01694243.2019.1702829.
    10.1080/01694243.2019.1702829
  183. Ramalho, L.D.C.; Belinha, J.; Campilho, R.D.S.G.. "The numerical simulation of crack propagation using radial point interpolation meshless methods". Engineering Analysis with Boundary Elements 109 (2019): 187-198. http://dx.doi.org/10.1016/j.enganabound.2019.10.001.
    10.1016/j.enganabound.2019.10.001
  184. Machado, J.J.M.; Hayashi, A.; Sekigushi, Y.; Campilho, R.D.S.G.; Marques, E.A.S.; Sato, C.; da Silva, Lucas F.M.. "Dynamic behaviour in mode I fracture toughness of CFRP as a function of temperature". Theoretical and Applied Fracture Mechanics 103 (2019): 102257. http://dx.doi.org/10.1016/j.tafmec.2019.102257.
    10.1016/j.tafmec.2019.102257
  185. Ramalho, L. D. C.; Campilho, R. D. S. G.; Belinha, J.. "Predicting single-lap joint strength using the natural neighbour radial point interpolation method". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 9 (2019): 362. http://dx.doi.org/10.1007/s40430-019-1862-0.
    Published • 10.1007/s40430-019-1862-0
  186. Valente, J.P.A.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Adhesive joint analysis under tensile impact loads by cohesive zone modelling". Composite Structures 222 (2019): 110894. http://dx.doi.org/10.1016/j.compstruct.2019.110894.
    10.1016/j.compstruct.2019.110894
  187. Moreira, F.J.P.; Campilho, R.D.S.G.. "Use of the XFEM for the design of adhesively-bonded T-joints". Frattura ed Integrità Strutturale 13 49 (2019): 435-449. http://dx.doi.org/10.3221/igf-esis.49.42.
    10.3221/igf-esis.49.42
  188. Viana, Filipe; Campilho, R.D.S.G.; Rocha, Ricardo; Silva, Daniel; Araújo, Rui; Ribeiro, José. "Fracture modelling of adhesively-bonded joints by an inverse method". Frattura ed Integrità Strutturale 13 48 (2019): 286-303. http://dx.doi.org/10.3221/igf-esis.48.29.
    10.3221/igf-esis.48.29
  189. Ribeiro, João; Campilho, R.D.S.G.; Rocha, Ricardo; Leal, Alberto; Viana, Filipe. "Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints". Frattura ed Integrità Strutturale 13 48 (2019): 332-347. http://dx.doi.org/10.3221/igf-esis.48.32.
    10.3221/igf-esis.48.32
  190. Ferreira, L.R.F.; Campilho, R.D.S.G.; Rocha, R.J.B.; Barbosa, D.R.. "Geometrical and material optimization of tensile loaded tubular adhesive joints using cohesive zone modelling". The Journal of Adhesion 95 5-7 (2019): 425-449. http://dx.doi.org/10.1080/00218464.2018.1551136.
    10.1080/00218464.2018.1551136
  191. Machado, R.M.D.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Extended finite element modelling of aluminium stepped-adhesive joints". The Journal of Adhesion 95 5-7 (2019): 450-473. http://dx.doi.org/10.1080/00218464.2018.1548966.
    10.1080/00218464.2018.1548966
  192. Luís D.C. Ramalho; Jorge Belinha; Raul D.S.G. Campilho. "Fracture propagation using the radial point interpolation method". Fatigue & Fracture of Engineering Materials & Structures 43 (2019): 77-91. https://doi.org/10.1111/ffe.13046.
    10.1111/ffe.13046
  193. Barbosa, D.R.; Campilho, R.D.S.G.; Rocha, R.J.B.; Ferreira, L.R.F.. "Experimental and numerical assessment of tensile loaded tubular adhesive joints". Journal of Materials: Design and Application – Part L 233 (2019): 452-464.
    Published
  194. Ramesh, V.; Campilho, R.D.S.G.; Silva, F.J.G.; Rocha, R.J.B.; Kumar, S.. "Evaluation of the extended finite element method for the analysis of bonded joints with different geometries". Procedia Manufacturing 38 (2019): 264-271. http://dx.doi.org/10.1016/j.promfg.2020.01.035.
    10.1016/j.promfg.2020.01.035
  195. Ferreira, L.R.F.; Campilho, R.D.S.G.; Barbosa, D.R.; Rocha, R.J.B.; Silva, F.J.G.. "Static strength improvement of tubular aluminium adhesive joints by the outer chamfering technique". Procedia Manufacturing 38 (2019): 629-636. http://dx.doi.org/10.1016/j.promfg.2020.01.081.
    10.1016/j.promfg.2020.01.081
  196. Kumar, S.; Campilho, R.D.S.G.; Silva, F.J.G.. "Rethinking modular jigs’ design regarding the optimization of machining times". Procedia Manufacturing 38 (2019): 876-883. http://dx.doi.org/10.1016/j.promfg.2020.01.169.
    10.1016/j.promfg.2020.01.169
  197. Sousa, J.C.M de; Campilho, R.D.S.G.; Silva, F.J.G.; Santos, P.M.M. dos. "Process improvement in the metallic mesh cutting operation associated to tire manufacturing". Procedia Manufacturing 38 (2019): 924-931. http://dx.doi.org/10.1016/j.promfg.2020.01.175.
    10.1016/j.promfg.2020.01.175
  198. Leal, A.J.S.; Campilho, R.D.S.G.; Silva, F.J.G.; Silva, D.F.O.; Moreira, F.J.P.. "Comparison of different test configurations for the shear fracture toughness evaluation of a ductile adhesive". Procedia Manufacturing 38 (2019): 940-947. http://dx.doi.org/10.1016/j.promfg.2020.01.177.
    10.1016/j.promfg.2020.01.177
  199. Oliveira, H.D.B.C.L. de; Campilho, R.D.S.G.; Silva, F.J.G.. "Design of a modular solution for an autonomous vehicle for cargo transport and handling". Procedia Manufacturing 38 (2019): 991-999. http://dx.doi.org/10.1016/j.promfg.2020.01.183.
    10.1016/j.promfg.2020.01.183
  200. Chandrasekaran, R.; Campilho, R.D.S.G.; Silva, F.J.G.. "Reduction of scrap percentage of cast parts by optimizing the process parameters". Procedia Manufacturing 38 (2019): 1050-1057. http://dx.doi.org/10.1016/j.promfg.2020.01.191.
    10.1016/j.promfg.2020.01.191
  201. Silva, J.O.S.; Campilho, R.D.S.G.; Rocha, R.J.B.; Silva, F.J.G.. "Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints". Procedia Manufacturing 38 (2019): 1189-1196. http://dx.doi.org/10.1016/j.promfg.2020.01.209.
    10.1016/j.promfg.2020.01.209
  202. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; Silva, F.J.G.; Cardoso, M.G.. "Effect of material hybridization on the strength of scarf adhesive joints". Procedia Manufacturing 38 (2019): 1244-1251. http://dx.doi.org/10.1016/j.promfg.2020.01.216.
    10.1016/j.promfg.2020.01.216
  203. Nunes, F.A.A.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Fracture envelope estimation of a structural adhesive by dedicated fracture tests". Procedia Manufacturing 38 (2019): 1252-1259. http://dx.doi.org/10.1016/j.promfg.2020.01.217.
    10.1016/j.promfg.2020.01.217
  204. Teixeira, J.M.D.; Campilho, R.D.S.G.; Silva, F.J.G.; Moreira, F.J.P.; Silva, D.F.O.. "Comparative evaluation of different fracture tests for the tensile fracture toughness of a ductile adhesive". Procedia Manufacturing 38 (2019): 1268-1275. http://dx.doi.org/10.1016/j.promfg.2020.01.221.
    10.1016/j.promfg.2020.01.221
  205. Veiga, N.F.M.; Campilho, R.D.S.G.; Silva, F.J.G. da; Santos, P.M.M.; Lopes, P.V.. "Design of automated equipment for the assembly of automotive parts". Procedia Manufacturing 38 (2019): 1316-1323. http://dx.doi.org/10.1016/j.promfg.2020.01.158.
    10.1016/j.promfg.2020.01.158
  206. Pinto, B.; Silva, F.J.G.; Costa, T.; Campilho, R.D.S.G.; Pereira, M.T.. "A Strategic Model to take the First Step Towards Industry 4.0 in SMEs". Procedia Manufacturing 38 (2019): 637-645. http://dx.doi.org/10.1016/j.promfg.2020.01.082.
    10.1016/j.promfg.2020.01.082
  207. Costa, C.; Silva, F.J.G.; Campilho, R.D.S.G.; Neves, P.; Godina, R.; Ferreira, S.. "Influence of textile cord tension in cap ply production". Procedia Manufacturing 38 (2019): 1766-1774. http://dx.doi.org/10.1016/j.promfg.2020.01.090.
    10.1016/j.promfg.2020.01.090
  208. Selvaraj, D.K.; Silva, F.J.G.; Campilho, R.D.S.G.; Baptista, A.; Pinto, G.F.L.. "Influence of the natural additive on natural fiber reinforced thermoplastic composite". Procedia Manufacturing 38 (2019): 1121-1129. http://dx.doi.org/10.1016/j.promfg.2020.01.200.
    10.1016/j.promfg.2020.01.200
  209. Pinto, H.A.; Silva, F.J.G.; Martinho, R.P.; Campilho, R.D.S.G.; Pinto, A.G.. "Improvement and validation of Zamak die casting moulds". Procedia Manufacturing 38 (2019): 1547-1557. http://dx.doi.org/10.1016/j.promfg.2020.01.131.
    10.1016/j.promfg.2020.01.131
  210. Amaral, I.; Silva, F.J.G.; Pinto, G.F.L.; Campilho, R.D.S.G.; Gouveia, R.M.. "Improving the Cut Surface Quality by Optimizing Parameters in the Fibre Laser Cutting Process". Procedia Manufacturing 38 (2019): 1111-1120. http://dx.doi.org/10.1016/j.promfg.2020.01.199.
    10.1016/j.promfg.2020.01.199
  211. Fernandes, A. Baptista; Silva, F.J.G.; Campilho, R.D.S.G.; Pinto, G.F.L.. "Intralogistics and industry 4.0: designing a novel shuttle with picking system". Procedia Manufacturing 38 (2019): 1801-1832. http://dx.doi.org/10.1016/j.promfg.2020.01.078.
    10.1016/j.promfg.2020.01.078
  212. Pinto, G.F.L.; Silva, F.J.G.; Campilho, R.D.S.G.; Casais, R.B.; Fernandes, A.J.; Baptista, A.. "Continuous improvement in maintenance: a case study in the automotive industry involving Lean tools". Procedia Manufacturing 38 (2019): 1582-1591. http://dx.doi.org/10.1016/j.promfg.2020.01.127.
    10.1016/j.promfg.2020.01.127
  213. Dias, P.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Santos, T.. "Analysis and Improvement of an Assembly Line in the Automotive Industry". Procedia Manufacturing 38 (2019): 1444-1452. http://dx.doi.org/10.1016/j.promfg.2020.01.143.
    10.1016/j.promfg.2020.01.143
  214. Santos, P.R.; Silva, F.J.G.; Campilho, R.D.S.G.; Pinto, G.F.L.; Baptista, A.. "A novel concept of a conduit transport system". Procedia Manufacturing 38 (2019): 848-857. http://dx.doi.org/10.1016/j.promfg.2020.01.166.
    10.1016/j.promfg.2020.01.166
  215. Ribeiro, R.; Silva, F.J.G.; Pinto, A.G.; Campilho, R.D.S.G.; Pinto, H.A.. "Designing a Novel System for the Introduction of Lubricant in Control Cables for the Automotive Industry". Procedia Manufacturing 38 (2019): 715-725. http://dx.doi.org/10.1016/j.promfg.2020.01.096.
    10.1016/j.promfg.2020.01.096
  216. Tellini, T.; Silva, F.J.G.; Pereira, T.; Morgado, L.; Campilho, R.D.S.G.; Ferreira, L.P.. "Improving In-Plant Logistics Flow by Physical and Digital Pathways". Procedia Manufacturing 38 (2019): 965-974. http://dx.doi.org/10.1016/j.promfg.2020.01.180.
    10.1016/j.promfg.2020.01.180
  217. Santos, T.; Silva, F.J.G.; Ramos, S.F.; Campilho, R.D.S.G.; Ferreira, L.P.. "Asset Priority Setting for Maintenance Management in the Food Industry". Procedia Manufacturing 38 (2019): 1623-1633. http://dx.doi.org/10.1016/j.promfg.2020.01.122.
    10.1016/j.promfg.2020.01.122
  218. Lopes, P.V.; Silva, F.J.G.; Campilho, R.D.S.G.; Almeida, F. de. "Designing a novel and greener truck asphalt container". Procedia Manufacturing 38 (2019): 324-332. http://dx.doi.org/10.1016/j.promfg.2020.01.042.
    10.1016/j.promfg.2020.01.042
  219. Monteiro, J.; Silva, F.J.G.; Ramos, S.F.; Campilho, R.D.S.G.; Fonseca, A.M.. "Eco-Design and Sustainability in Packaging: A Survey". Procedia Manufacturing 38 (2019): 1741-1749. http://dx.doi.org/10.1016/j.promfg.2020.01.097.
    10.1016/j.promfg.2020.01.097
  220. Machado, D.M.S.R.B.; Campilho, R.D.S.G.; Cardoso, M.G.. "Impact modelling of single-lap bonded joints by cohesive zone models". Procedia Manufacturing 41 (2019): 34-41. http://dx.doi.org/10.1016/j.promfg.2019.07.026.
    10.1016/j.promfg.2019.07.026
  221. Eusébio, S.M.L.; Campilho, R.D.S.G.. "Modelling of tubular adhesively-bonded joints by the Extended Finite Element Method". Procedia Manufacturing 41 (2019): 484-491. http://dx.doi.org/10.1016/j.promfg.2019.10.001.
    10.1016/j.promfg.2019.10.001
  222. Magalhães, A. J. A.; Silva, F. J. G.; Campilho, R.D.S.G.. "A novel concept of bent wires sorting operation between workstations in the production of automotive parts". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 1 (2018): 25. http://dx.doi.org/10.1007/s40430-018-1522-9.
    10.1007/s40430-018-1522-9
  223. Silva, D.F.O.; Campilho, R.D.S.G.; da Silva, F.J.G.; Carvalho, U.T.F.. "Application a direct/cohesive zone method for the evaluation of scarf adhesive joints". Applied Adhesion Science 6 1 (2018): 13. https://doi.org/10.1186/s40563-018-0115-2.
    10.1186/s40563-018-0115-2
  224. Barbosa, N.G.C.; Campilho, R.D.S.G.; da Silva, F.J.G.; Moreira, R.D.F.. "Comparison of different adhesively-bonded joint types for mechanical structures". Applied Adhesion Science 6 1 (2018): 15. https://doi.org/10.1186/s40563-018-0116-1.
    10.1186/s40563-018-0116-1
  225. Silva, J.O.S.; Campilho, R.D.S.G.; Rocha, R.J.B.. "Crack growth analysis of adhesively-bonded stepped joints in aluminium structures". Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 11 (2018): 540. https://doi.org/10.1007/s40430-018-1466-0.
    10.1007/s40430-018-1466-0
  226. Leal, A.J.S.; Campilho, R.D.S.G.. "Numerical evaluation of the ENF and 4ENF tests for the shear toughness estimation of adhesive joints". Composite Structures 202 (2018): 333-343. http://dx.doi.org/10.1016/j.compstruct.2018.01.107.
    10.1016/j.compstruct.2018.01.107
  227. Nunes, F.A.A.; Campilho, R.D.S.G.. "Mixed-mode fracture analysis of adhesively-bonded joints using the ATDCB test specimen". International Journal of Adhesion and Adhesives 85 (2018): 58-68. http://dx.doi.org/10.1016/j.ijadhadh.2018.05.019.
    10.1016/j.ijadhadh.2018.05.019
  228. da Silva, F.J.G.; Araújo, W.; Campilho, R.D.S.G.; Baptista, A.; Pinto, G.. "How to Become a Manufacturing Cell Fully-Automated Without Robots: Case-Study in the Automotive Components Industry". Advances in Robotics & Mechanical Engineering 1 1 (2018): 3-9. http://dx.doi.org/10.32474/arme.2018.01.000102.
    10.32474/arme.2018.01.000102
  229. Costa, M.; Viana, G.; Créac’hcadec, R.; da Silva, L.F.M.; Campilho, R.D.S.G.. "A cohesive zone element for mode I modelling of adhesives degraded by humidity and fatigue". International Journal of Fatigue 112 (2018): 173-182. http://dx.doi.org/10.1016/j.ijfatigue.2018.03.014.
    10.1016/j.ijfatigue.2018.03.014
  230. Alves, D.L.; Campilho, R.D.S.G.; Moreira, R.D.F.; Silva, F.J.G.; da Silva, L.F.M.. "Experimental and numerical analysis of hybrid adhesively-bonded scarf joints". International Journal of Adhesion and Adhesives 83 (2018): 87-95. http://dx.doi.org/10.1016/j.ijadhadh.2018.05.011.
    10.1016/j.ijadhadh.2018.05.011
  231. Figueiredo, J.C.P.; Campilho, R.D.S.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Adhesive thickness influence on the shear fracture toughness measurements of adhesive joints". International Journal of Adhesion and Adhesives 83 (2018): 15-23. http://dx.doi.org/10.1016/j.ijadhadh.2018.02.015.
    10.1016/j.ijadhadh.2018.02.015
  232. Silva, F.J.G.; Baptista, A.; Pinto, G.; Campilho, R.D.S.G.; Ribeiro, M.C.S.. "Characterization of hybrid pultruded structural products based on preforms". Composites Part B: Engineering 140 (2018): 16-26. http://dx.doi.org/10.1016/j.compositesb.2017.12.019.
    10.1016/j.compositesb.2017.12.019
  233. de Oliveira, B.M.A.; Campilho, R.D.S.G.; Silva, F.J.G.; Rocha, R.J.B.. "Comparison between the ENF and 4ENF fracture characterization tests to evaluate GIIC of bonded aluminium joints". The Journal of Adhesion 94 11 (2018): 910-931. http://dx.doi.org/10.1080/00218464.2017.1387056.
    10.1080/00218464.2017.1387056
  234. Fernandes, R.L.; Campilho, R.D.S.G.. "Accuracy of cohesive laws with different shape for the shear behaviour prediction of bonded joints". The Journal of Adhesion 95 4 (2018): 325-347. http://dx.doi.org/10.1080/00218464.2018.1438895.
    10.1080/00218464.2018.1438895
  235. Teixeira, JMD; Campilho, RDSG; da Silva, FJG. "Numerical assessment of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for the GIC determination of adhesive layers". The Journal of Adhesion 94 11 (2018): 951-973. http://dx.doi.org/10.1080/00218464.2017.1383905.
    10.1080/00218464.2017.1383905
  236. Xará, J.T.S.; Campilho, R.D.S.G.. "Strength estimation of hybrid single-L bonded joints by the eXtended Finite Element Method". Composite Structures 183 (2018): 397-406. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018776731&partnerID=MN8TOARS.
    10.1016/j.compstruct.2017.04.009
  237. Silva, D.F.O.; Campilho, R.D.S.G.; Silva, F.J.G.; Carvalho, U.T.F.. "Experimental and numerical analysis of scarf aluminum adhesive joints". Procedia Manufacturing 17 (2018): 705-712. http://dx.doi.org/10.1016/j.promfg.2018.10.120.
    10.1016/j.promfg.2018.10.120
  238. Almeida, F.J.S. de; Campilho, R.D.S.G.; Silva, F.J.G.; Marques, G.P.. "Development of a numerical methodology for strength prediction of weld-bonded joints". Procedia Manufacturing 17 (2018): 713-720. http://dx.doi.org/10.1016/j.promfg.2018.10.121.
    10.1016/j.promfg.2018.10.121
  239. Barbosa, N.G.C.; Campilho, R.D.S.G.; Silva, F.J.G. da; Moreira, R.D.F.. "Comparison of different adhesively-bonded joint configurations for mechanical structures". Procedia Manufacturing 17 (2018): 721-728. http://dx.doi.org/10.1016/j.promfg.2018.10.122.
    10.1016/j.promfg.2018.10.122
  240. Santos, P.M.M.; Campilho, R.D.S.G.; Silva, F.J.G.. "Design of a novel equipment for automated clothing manufacturing". Procedia Manufacturing 17 (2018): 766-773. http://dx.doi.org/10.1016/j.promfg.2018.10.127.
    10.1016/j.promfg.2018.10.127
  241. Barbosa, R.C.N.; Campilho, R.D.S.G.; Silva, F.J.G.. "Injection mold design for a plastic component with blowing agent". Procedia Manufacturing 17 (2018): 774-782. http://dx.doi.org/10.1016/j.promfg.2018.10.128.
    10.1016/j.promfg.2018.10.128
  242. Santos, R.F.L.; Silva, F.J.G.; Gouveia, R.M.; Campilho, R.D.S.G.; Pereira, M.T.; Ferreira, L.P.. "The Improvement of an APEX Machine involved in the Tire Manufacturing Process". Procedia Manufacturing 17 (2018): 571-578. http://dx.doi.org/10.1016/j.promfg.2018.10.098.
    10.1016/j.promfg.2018.10.098
  243. Silva, Gabriel B.; Silva, F.J.G.; Campilho, R.D.S.G.; Gouveia, R.M.. "Designing a Novel Feeding System for CNC Turning Machines". Procedia Manufacturing 17 (2018): 1144-1153. http://dx.doi.org/10.1016/j.promfg.2018.10.020.
    10.1016/j.promfg.2018.10.020
  244. Silva, F.J.G.; Campilho, R.D.S.G.; Gouveia, R.M.; Pinto, G.; Baptista, A.. "A Novel Approach to Optimize the Design of Parts for Additive Manufacturing". Procedia Manufacturing 17 (2018): 53-61. http://dx.doi.org/10.1016/j.promfg.2018.10.012.
    10.1016/j.promfg.2018.10.012
  245. Barbosa, D.R.; Campilho, R.D.S.G.; Rocha, R.J.B.; Ferreira, L.R.F.. "Cohesive zone analysis of tubular adhesively-bonded joints". Welding Equipment and Technology 29 (2018): 11-18.
    Published
  246. Santos, M.A.S.; Campilho, R.D.S.G.. "Experimental and numerical analysis of the fracture envelope of composite adhesive joints". Ciência e Tecnologia dos Materiais 30 (2018): 131-137.
    Published
  247. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Validation of a direct method to predict the strength of adhesively bonded joints". Ciência e Tecnologia dos Materiais 30 (2018): 138-143.
    Published
  248. Silva, F.J.G.; Amorim, E.; Baptista, A.; Pinto, G.; Campilho, R.D.S.G.; Castro, M.R.A.. "Producing hybrid pultruded structural products based on preforms". Composites Part B: Engineering 116 (2017): 325-332. http://dx.doi.org/10.1016/j.compositesb.2016.10.070.
    10.1016/j.compositesb.2016.10.070
  249. Gálvez, P; Carbas, RJC; Campilho, RDSG; Abenojar, J; Martínez, MA; LFM, da Silva. "Fracture toughness in Mode I (GIC) for ductile adhesives". Journal of Physics: Conference Series 843 (2017): 012008. http://dx.doi.org/10.1088/1742-6596/843/1/012008.
    10.1088/1742-6596/843/1/012008
  250. Araújo, L.M.B.; Silva, F.J.G.; Campilho, R.D.S.G.; Matos, J.A.. "A novel dynamic holding system for thin metal plate shearing machines". Robotics and Computer-Integrated Manufacturing 44 (2017): 242-252. http://dx.doi.org/10.1016/j.rcim.2016.06.006.
    10.1016/j.rcim.2016.06.006
  251. Costa, M. J. R.; Gouveia, R. M.; Silva, F. J. G.; Campilho, R. D. S. G.. "How to solve quality problems by advanced fully-automated manufacturing systems". The International Journal of Advanced Manufacturing Technology 94 9-12 (2017): 3041-3063. http://dx.doi.org/10.1007/s00170-017-0158-8.
    10.1007/s00170-017-0158-8
  252. Costa, R. J. S.; Silva, F. J. G.; Campilho, R. D. S. G.. "A novel concept of agile assembly machine for sets applied in the automotive industry". The International Journal of Advanced Manufacturing Technology 91 9-12 (2017): 4043-4054. http://dx.doi.org/10.1007/s00170-017-0109-4.
    10.1007/s00170-017-0109-4
  253. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of humidity on the fatigue behaviour of adhesively bonded aluminium joints". Latin American Journal of Solids and Structures 14 1 (2017): 174-187. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010931026&partnerID=MN8TOARS.
    10.1590/1679-78252976
  254. Xará, J.T.S.; Campilho, R.D.S.G.. "EXtended Finite Element Method applied to the strength prediction of adhesively-bonded joints". Journal of Physics: Conference Series 843 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85021434773&partnerID=MN8TOARS.
    10.1088/1742-6596/843/1/012003
  255. Rocha, R.J.B.; Campilho, R.D.S.G.. "Evaluation of different modelling conditions in the cohesive zone analysis of single-lap bonded joints". The Journal of Adhesion 94 (2017): 562-582. http://www.scopus.com/inward/record.url?eid=2-s2.0-85025655342&partnerID=MN8TOARS.
    10.1080/00218464.2017.1307107
  256. Rocha, R.J.B.; Campilho, R.D.S.G.; Silva, F.J.G.. "Validation of advanced numerical techniques for the strength prediction of adhesively-bonded joints". Procedia Manufacturing 13 (2017): 43-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030833600&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.007
  257. Machado, J.J.M.; Marques, E.A.S.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode II fracture toughness of CFRP as a function of temperature and strain rate". Composites Part B: Engineering 114 (2017): 311-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013224925&partnerID=MN8TOARS.
    10.1016/j.compositesb.2017.02.013
  258. Rocha, R.J.B.; Campilho, R.D.S.G.. "Detailed investigation of the analysis conditions in the evaluation of bonded joints by cohesive zone models". Journal of Physics: Conference Series 843 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85021395708&partnerID=MN8TOARS.
    10.1088/1742-6596/843/1/012002
  259. Carneiro, M.A.S.; Campilho, R.D.S.G.; Silva, F.J.G.. "Experimental and numerical analysis of adhesively-bonded T joints under peel loads". Procedia Manufacturing 13 (2017): 51-58. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030871272&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.008
  260. Costa, M.; Viana, G.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Environmental effect on the fatigue degradation of adhesive joints: A review". Journal of Adhesion 93 1-2 (2017): 127-146. http://www.scopus.com/inward/record.url?eid=2-s2.0-84989243746&partnerID=MN8TOARS.
    10.1080/00218464.2016.1179117
  261. Machado, J.J.M.; Marques, E.A.S.; Campilho, R.D.S.G.; da Silva, L.F.M.. "Mode I fracture toughness of CFRP as a function of temperature and strain rate". Journal of Composite Materials 51 23 (2017): 3315-3326. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029441311&partnerID=MN8TOARS.
    10.1177/0021998316682309
  262. Fernandes, R.L.; Campilho, R.D.S.G.. "Testing different cohesive law shapes to predict damage growth in bonded joints loaded in pure tension". Journal of Adhesion 93 1-2 (2017): 57-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979080273&partnerID=MN8TOARS.
    10.1080/00218464.2016.1169176
  263. Santos, T.F.; Campilho, R.D.S.G.. "Numerical modelling of adhesively-bonded double-lap joints by the eXtended Finite Element Method". Finite Elements in Analysis and Design 133 (2017): 1-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019080063&partnerID=MN8TOARS.
    10.1016/j.finel.2017.05.005
  264. Carneiro, M.A.S.; Campilho, R.D.S.G.. "Analysis of adhesively-bonded T-joints by experimentation and cohesive zone models". Journal of Adhesion Science and Technology 31 18 (2017): 1998-2014. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013127779&partnerID=MN8TOARS.
    10.1080/01694243.2017.1291320
  265. Faneco, T.M.S.; Campilho, R.D.S.G.; Silva, F.J.G.; Lopes, R.M.. "Strength and fracture characterization of a novel polyurethane adhesive for the automotive industry". Journal of Testing and Evaluation 45 2 (2017): 398-407. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020089504&partnerID=MN8TOARS.
    10.1520/JTE20150335
  266. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Validation of pure tensile and shear cohesive laws obtained by the direct method with single-lap joints". International Journal of Adhesion and Adhesives 77 (2017): 41-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017327318&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2017.04.002
  267. Banea, M.D.; da Silva, L.F.M.; Carbas, R.; Campilho, R.D.S.G.. "Effect of material on the mechanical behaviour of adhesive joints for the automotive industry". Journal of Adhesion Science and Technology 31 6 (2017): 663-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986203538&partnerID=MN8TOARS.
    10.1080/01694243.2016.1229842
  268. Azevedo, J.C.S.; Campilho, R.D.S.G.; Silva, F.J.G.. "Shear fracture toughness and cohesive laws of adhesively-bonded joints". Ciencia e Tecnologia dos Materiais 29 1 (2017): 124-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021956719&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.05.003
  269. Leitão, A.C.C.; Campilho, R.D.S.G.; Azevedo, J.C.S.. "Shear cohesive law estimation of adhesive layers by digital image correlation". Ciencia e Tecnologia dos Materiais 29 1 (2017): 119-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021961364&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.05.002
  270. Santos, M.A.S.; Campilho, R.D.S.G.. "Mixed-mode fracture analysis of composite bonded joints considering adhesives of different ductility". International Journal of Fracture 207 1 (2017): 55-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019675163&partnerID=MN8TOARS.
    10.1007/s10704-017-0219-x
  271. Domingues, N.R.E.; Trojan, J.C.; Campilho, R.D.S.G.; Carbas, R.J.C.; Banea, M.D.; da Silva, L.F.M.. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Ciencia e Tecnologia dos Materiais 29 1 (2017): 114-118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021952151&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.04.009
  272. Moreira, B.M.D.N.; Gouveia, Ronny M.; Silva, F.J.G.; Campilho, R.D.S.G.. "A Novel Concept of Production and Assembly Processes Integration". Procedia Manufacturing 11 (2017): 1385-1395. http://dx.doi.org/10.1016/j.promfg.2017.07.268.
    10.1016/j.promfg.2017.07.268
  273. Barbosa, B.; Pereira, M.T.; Silva, F.J.G.; Campilho, R.D.S.G.. "Solving Quality Problems in Tyre Production Preparation Process: A Practical Approach". Procedia Manufacturing 11 (2017): 1239-1246. http://dx.doi.org/10.1016/j.promfg.2017.07.250.
    10.1016/j.promfg.2017.07.250
  274. Gomes, Tiago; Silva, F.J.G.; Campilho, R.D.G.S.. "Reducing the Simulation Cost on Dual-phase Steel Stamping Process". Procedia Manufacturing 11 (2017): 474-481. http://dx.doi.org/10.1016/j.promfg.2017.07.138.
    10.1016/j.promfg.2017.07.138
  275. Castro, T.A.M.; Silva, F.J.G.; Campilho, R.D.S.G.. "Optimising a Specific Tool for Electrical Terminals Crimping Process". Procedia Manufacturing 11 (2017): 1438-1447. http://dx.doi.org/10.1016/j.promfg.2017.07.274.
    10.1016/j.promfg.2017.07.274
  276. Rosa, C.; Silva, F.J.G.; Ferreira, L. Pinto; Campilho, R.. "SMED methodology: The reduction of setup times for Steel Wire-Rope assembly lines in the automotive industry". Procedia Manufacturing 13 (2017): 1034-1042. http://dx.doi.org/10.1016/j.promfg.2017.09.110.
    10.1016/j.promfg.2017.09.110
  277. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Strength prediction of adhesively-bonded joints using improved cohesive law estimation". Welding Equipment and Technology 28 (2017): 25-31.
    Published
  278. de Sousa, CCRG; Campilho, RDSG; Marques, EAS; Costa, M; da Silva, LFM. "Overview of different strength prediction techniques for single-lap bonded joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231 1-2 (2016): 210-223. http://dx.doi.org/10.1177/1464420716675746.
    10.1177/1464420716675746
  279. Araújo, W. F. S.; Silva, F. J. G.; Campilho, R. D. S. G.; Matos, J. A.. "Manufacturing cushions and suspension mats for vehicle seats: a novel cell concept". The International Journal of Advanced Manufacturing Technology 90 5-8 (2016): 1539-1545. http://dx.doi.org/10.1007/s00170-016-9475-6.
    10.1007/s00170-016-9475-6
  280. Costa, M; Viana, G; da Silva, LFM; Campilho, RDSG. "Effect of humidity on the mechanical properties of adhesively bonded aluminium joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232 9 (2016): 733-742. http://dx.doi.org/10.1177/1464420716645263.
    10.1177/1464420716645263
  281. Marques, E.A.S.; Campilho, R.D.S.G.; Da Silva, L.F.M.. "Geometrical study of mixed adhesive joints for high-temperature applications". Journal of Adhesion Science and Technology 30 7 (2016): 691-707. http://www.scopus.com/inward/record.url?eid=2-s2.0-84954400731&partnerID=MN8TOARS.
    10.1080/01694243.2015.1121801
  282. de Almeida, F.J.S.; Campilho, R.D.S.G.; Silva, F.J.G.. "Strength prediction of T-peel joints by a hybrid spot-welding/adhesive bonding technique". The Journal of Adhesion 94 (2016): 181-198. http://www.scopus.com/inward/record.url?eid=2-s2.0-84999766452&partnerID=MN8TOARS.
    Published • 10.1080/00218464.2016.1244013
  283. Carneiro, M.A.S.; Campilho, R.D.S.G.. "The effect of geometry and adhesive on the strength of T-Joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 27 (2016): 12-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021821577&partnerID=MN8TOARS.
  284. Ribeiro, F.M.F.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.. "Strength and damage growth in composite bonded joints with defects". Composites Part B: Engineering 100 (2016): 91-100. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975871923&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.06.060
  285. Carvalho, U.T.F.; Campilho, R.D.S.G.. "Application of the direct method for cohesive law estimation applied to the strength prediction of double-lap joints". Theoretical and Applied Fracture Mechanics 85 (2016): 140-148. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991205741&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.018
  286. Costa, M.; Viana, G.; Canto, C.; Da Silva, L.F.M.; Banea, M.D.; Chaves, F.; Campilho, R.D.S.G.; Fernandes, A.A.. "Effect of the size reduction on the bulk tensile and double cantilever beam specimens used in cohesive zone models". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 5 (2016): 968-982. http://www.scopus.com/inward/record.url?eid=2-s2.0-84988419036&partnerID=MN8TOARS.
    10.1177/1464420715610248
  287. Domingues, N.R.E.; Campilho, R.D.S.G.; Carbas, R.J.C.; Da Silva, L.F.M.. "Experimental and numerical failure analysis of aluminium/composite single-L joints". International Journal of Adhesion and Adhesives 64 (2016): 86-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945588451&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2015.10.011
  288. Leitão, A.C.C.; Campilho, R.D.S.G.; Moura, D.C.. "Shear Characterization of Adhesive Layers by Advanced Optical Techniques". Experimental Mechanics 56 3 (2016): 493-506. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959153986&partnerID=MN8TOARS.
    10.1007/s11340-015-0111-4
  289. Moreira, R.D.F.; Campilho, R.D.S.G.. "Parametric study of the reinforcement geometry on tensile loaded scarf adhesive repairs". Journal of Adhesion 92 7-9 (2016): 586-609. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962450111&partnerID=MN8TOARS.
    10.1080/00218464.2015.1095639
  290. Nunes, S.L.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.; De Sousa, C.C.R.G.; Fernandes, T.A.B.; Banea, M.D.; Da Silva, L.F.M.. "Comparative failure assessment of single and double lap joints with varying adhesive systems". Journal of Adhesion 92 7-9 (2016): 610-634. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962468952&partnerID=MN8TOARS.
    10.1080/00218464.2015.1103227
  291. Marques, G.P.; Campilho, R.D.S.G.; Da Silva, F.J.G.; Moreira, R.D.F.. "Adhesive selection for hybrid spot-welded/bonded single-lap joints: Experimentation and numerical analysis". Composites Part B: Engineering 84 (2016): 248-257. http://www.scopus.com/inward/record.url?eid=2-s2.0-84942362239&partnerID=MN8TOARS.
    10.1016/j.compositesb.2015.09.002
  292. Ribeiro, T.E.A.; Campilho, R.D.S.G.; da Silva, L.F.M.; Goglio, L.. "Damage analysis of composite-aluminium adhesively-bonded single-lap joints". Composite Structures 136 (2016): 25-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944226919&partnerID=MN8TOARS.
    10.1016/j.compstruct.2015.09.054
  293. Lopes, R.M.; Campilho, R.D.S.G.; da Silva, F.J.G.; Faneco, T.M.S.. "Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive joints". International Journal of Adhesion and Adhesives 67 (2016): 103-111.
    10.1016/j.ijadhadh.2015.12.032
  294. Fernandes, R.L.; Campilho, R.D.S.G.. "Numerical evaluation of dissimilar cohesive models to predict the behavior of Double-Cantilever Beam specimens". Procedia Structural Integrity 1 (2016): 42-49. http://dx.doi.org/10.1016/j.prostr.2016.02.007.
    10.1016/j.prostr.2016.02.007
  295. Azevedo, J.C.S.; Campilho, R.D.S.G.; da Silva, F.J.G.; Faneco, T.M.S.; Lopes, R.M.. "Cohesive law estimation of adhesive joints in mode II condition". Theoretical and Applied Fracture Mechanics 80 (2015): 143-154. http://dx.doi.org/10.1016/j.tafmec.2015.09.007.
    10.1016/j.tafmec.2015.09.007
  296. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Adhesive thickness effects of a ductile adhesive by optical measurement techniques". International Journal of Adhesion and Adhesives 57 (2015): 125-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919608228&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.12.004
  297. Campilho, R.D.S.G.; Leitão, A.C.C.; Fernandes, R.L.; Azevedo, J.C.S.; Banea, M.D.. "Cohesive law estimation in mode II of a ductile adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 26 (2015): 27-32. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984535678&partnerID=MN8TOARS.
  298. Moreira, R.D.F.; Campilho, R.D.S.G.. "Strength improvement of adhesively-bonded scarf repairs in aluminium structures with external reinforcements". Engineering Structures 101 (2015): 99-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937580339&partnerID=MN8TOARS.
    10.1016/j.engstruct.2015.07.001
  299. Monteiro, J.P.R.; Campilho, R.D.S.G.; Marques, E.A.S.; da Silva, L.F.M.. "Experimental estimation of the mechanical and fracture properties of a new epoxy adhesive". Applied Adhesion Science 3 1 (2015): 1-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014288430&partnerID=MN8TOARS.
    10.1186/s40563-015-0056-y
  300. Constante, C.J.; Campilho, R.D.S.G.; Moura, D.C.. "Tensile fracture characterization of adhesive joints by standard and optical techniques". Engineering Fracture Mechanics 136 (2015): 292-304. http://www.scopus.com/inward/record.url?eid=2-s2.0-84939146360&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2015.02.010
  301. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Structural adhesives modified with thermally expandable particles". Journal of Adhesion 91 10-11 (2015): 823-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922825124&partnerID=MN8TOARS.
    10.1080/00218464.2014.985785
  302. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "A Study on Microstructure Characteristics of TEPs-modified Adhesives". Microscopy and Microanalysis 21 (2015): 7-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944063937&partnerID=MN8TOARS.
    10.1017/S1431927615013847
  303. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". Frattura ed Integrita Strutturale 31 (2015): 1-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920404080&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.31.01
  304. Fernandes, T.A.B.; Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction". Journal of Adhesion 91 10-11 (2015): 841-862. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937031747&partnerID=MN8TOARS.
    10.1080/00218464.2014.994703
  305. Fernandes, R.L.; Campilho, R.D.S.G.; Leitão, A.C.C.; Azevedo, J.C.S.. "Numerical evaluation of the direct method for cohesive law estimation in shear by the End-Notched Flexure test". Procedia Engineering 114 (2015): 94-101.
    Published
  306. Campilho, R.D.S.G.; Fernandes, T.A.B.. "Comparative evaluation of single-lap joints bonded with different adhesives by cohesive zone modelling". Procedia Engineering 114 (2015): 102-109.
    Published
  307. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Baptista, A.P.M.. "Strap repairs using embedded patches: Numerical analysis and experimental results". Journal of Adhesion Science and Technology 28 14-15 (2014): 1530-1544. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899438669&partnerID=MN8TOARS.
    10.1080/01694243.2012.698130
  308. Pinto, A.M.G.; Ribeiro, N.F.Q.R.; Campilho, R.D.S.G.; Mendes, I.R.. "Effect of adherend recessing on the tensile strength of single lap joints". Journal of Adhesion 90 8 (2014): 649-666. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898468128&partnerID=MN8TOARS.
    10.1080/00218464.2013.766132
  309. Banea, M.D.; Silva, L.F.M.D.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): 19-22.
    Published
  310. Campilho, R.D.S.G.; Fernandes, T.A.B.; Banea, M.D.; Silva, L.F.M.D.. "Cohesive Zone and Extended Finite Element modelling for bonded joint strength prediction". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): 5-12.
    Published
  311. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive". Journal of Adhesion 91 5 (2014): 331-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-84910090965&partnerID=MN8TOARS.
    10.1080/00218464.2014.903802
  312. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications". Journal of Adhesion Science and Technology 28 14-15 (2014): 1367-1381. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899440602&partnerID=MN8TOARS.
    10.1080/01694243.2012.697388
  313. Campilho, R.D.S.G.; Moura, D.C.; Banea, M.D.; Da Silva, L.F.M.. "Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method". International Journal of Adhesion and Adhesives 53 (2014): 15-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901986334&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.01.015
  314. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". International Journal of Adhesion and Adhesives 54 (2014): 191-199. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903983437&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.06.008
  315. Gonçalves, D.J.S.; Campilho, R.D.S.G.; Da Silva, L.F.M.; Fernandes, J.L.M.. "The use of the boundary element method in the analysis of single lap joints". Journal of Adhesion 90 1 (2014): 50-64. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886715505&partnerID=MN8TOARS.
    10.1080/00218464.2013.763725
  316. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.; Sato, C.. "Smart adhesive joints: An overview of recent developments". Journal of Adhesion 90 1 (2014): 16-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886678032&partnerID=MN8TOARS.
    10.1080/00218464.2013.785916
  317. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Baptista, A.P.M.. "Numerical and experimental analysis of balanced and unbalanced adhesive single-lap joints between aluminium adherends". Journal of Adhesion 90 1 (2014): 89-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886656546&partnerID=MN8TOARS.
    10.1080/00218464.2013.773258
  318. Banea, M.D.; Silva, L.F.M.D.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921290337&partnerID=MN8TOARS.
  319. Campilho, R.D.S.G.; Fernandes, T.A.B.; Banea, M.D.; Silva, L.F.M.D.. "Cohesive Zone and Extended Finite Element modelling for bonded joint strength prediction". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921310067&partnerID=MN8TOARS.
  320. Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.B.P.; Da Silva, L.F.M.. "Modelling adhesive joints with cohesive zone models: Effect of the cohesive law shape of the adhesive layer". International Journal of Adhesion and Adhesives 44 (2013): 48-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874908653&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2013.02.006
  321. Campilho, R.D.S.G.; Banea, M.D.. "Selection of the most suitable CZM conditions in the finite element strength prediction of adhesive joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 33-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896497139&partnerID=MN8TOARS.
  322. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "An overview of the technologies for adhesive debonding on command". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 11-14.
    Published
  323. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.. "Adhesive joints in natural fibre composites: Estimation of fracture properties". Ciencia e Tecnologia dos Materiais 25 1 (2013): 31-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901453784&partnerID=MN8TOARS.
    10.1016/j.ctmat.2013.12.007
  324. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Chaves, F.J.P.; da Silva, L.F.M.. "Feasibility of the extended finite element method for the simulation of composite bonded joints". Materials Science Forum 730-732 (2013): 513-518. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880983808&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.513
  325. Campilho, R.D.S.G.; Banea, M.D.; Da Silva, L.F.M.. "Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method". Journal of Adhesion 89 7 (2013): 529-547. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876114008&partnerID=MN8TOARS.
    10.1080/00218464.2013.768106
  326. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.; de Jesus, A.M.P.. "Characterization of aluminium single-lap joints for high temperature applications". Materials Science Forum 730-732 (2013): 721-726. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870764519&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.721
  327. Campilho, R.D.S.G.; Moura, D.C.; Gonçalves, D.J.S.; Da Silva, J.F.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Fracture toughness determination of adhesive and co-cured joints in natural fibre composites". Composites Part B: Engineering 50 (2013): 120-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877688451&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.01.025
  328. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Numerical and experimental study of tensile strength of single and double-strap repairs". Materials Science Forum 730-732 (2013): 1018-1023. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870755592&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.1018
  329. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Magalhães, A.G.; Baptista, A.P.M.. "Strap repair optimization by using embedded patches". Materials Science Forum 730-732 (2013): 1036-1041. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870763400&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.1036
  330. Campilho, R.D.S.G.; Chaves, F.J.P.; Pinto, A.M.G.; Banea, M.D.; da Silva, L.F.M.. "Influence of the cohesive law parameters on the strength prediction of adhesively-bonded joints". Materials Science Forum 730-732 (2013): 1000-1005. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870731639&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.1000
  331. Campilho, R.D.S.G.. "Comportamento à flexão de vigas de madeira reparadas por colagem de remendos de carbono-epóxido". Mecânica Experimental 22 (2013): 71-76.
    Published
  332. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "An overview of the technologies for adhesive debonding on command". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 11-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896503151&partnerID=MN8TOARS.
  333. Campilho, R.D.S.G.. "Adhesive, welded and weld-bonded single-lap joints: Numerical technique for strength prediction | Juntas de sobreposição simples adesivas, soldadas e adesivas-soldadas: Modelo numérico para previsão da resistência". Ciencia e Tecnologia dos Materiais 24 1-2 (2012): 35-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894190018&partnerID=MN8TOARS.
  334. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Innovative finite element techniques for strength prediction of bonded joints | Tehnici inovative de analiza cu elemente finite a rezistentei îmbinarilor lipite". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 26-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874208180&partnerID=MN8TOARS.
  335. Neto, J.A.B.P.; Campilho, R.D.S.G.; Da Silva, L.F.M.. "Parametric study of adhesive joints with composites". International Journal of Adhesion and Adhesives 37 (2012): 96-101. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861589867&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2012.01.019
  336. Campilho, R.D.S.G.; Banea, M.D.; Neto, J.A.B.P.; Da Silva, L.F.M.. "Modelling of single-lap joints using cohesive zone models: Effect of the cohesive parameters on the output of the simulations". Journal of Adhesion 88 4-6 (2012): 513-533. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861122382&partnerID=MN8TOARS.
    10.1080/00218464.2012.660834
  337. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Da Silva, L.F.M.. "Optimization study of hybrid spot-welded/bonded single-lap joints". International Journal of Adhesion and Adhesives 37 (2012): 86-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861591998&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2012.01.018
  338. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Duro, L.M.P.; Silva, R.F.; Baptista, A.P.M.. "Effect of plug-filling, testing velocity and temperature on the tensile strength of strap repairs on aluminium structures". Journal of Adhesion Science and Technology 26 10-11 (2012): 1481-1496. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864983395&partnerID=MN8TOARS.
    10.1163/156856111X618344
  339. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". Journal of Adhesion 88 4-6 (2012): 534-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861131754&partnerID=MN8TOARS.
    10.1080/00218464.2012.660835
  340. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Effect of temperature on tensile strength and mode i fracture toughness of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 26 7 (2012): 939-953. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864683421&partnerID=MN8TOARS.
    10.1163/156856111X593649
  341. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Moulds design for adhesive bulk and joint specimens manufacturing". Assembly Automation 32 3 (2012): 284-292. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870263974&partnerID=MN8TOARS.
    10.1108/01445151211244456
  342. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "High temperature adhesives for aerospace applications | Adezivi rezistenti la temperaturi ridicate utilizati în aplicatii aerospatiale". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 16-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874217795&partnerID=MN8TOARS.
  343. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Mode i fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". International Journal of Adhesion and Adhesives 31 5 (2011): 273-279. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956128948&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.09.005
  344. Campilho, R.D.S.G.; Banea, M.D.; Chaves, F.J.P.; Silva, L.F.M.D.. "EXtended Finite Element Method for fracture characterization of adhesive joints in pure mode i". Computational Materials Science 50 4 (2011): 1543-1549. http://www.scopus.com/inward/record.url?eid=2-s2.0-79151484108&partnerID=MN8TOARS.
    10.1016/j.commatsci.2010.12.012
  345. Campilho, R.D.S.G.; Pinto, A.M.G.; Banea, M.D.; Silva, R.F.; Da Silva, L.F.M.. "Strength improvement of adhesively-bonded joints using a reverse-bent geometry". Journal of Adhesion Science and Technology 25 18 (2011): 2351-2368. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052646241&partnerID=MN8TOARS.
    10.1163/016942411X580081
  346. Campilho, R.D.S.G.; Rocha, J.M.M.. "Strength prediction of adhesively bonded repairs on carbon-epoxy laminates by the single and double-strap techniques". Polymer Composites 32 8 (2011): 1254-1264. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960561944&partnerID=MN8TOARS.
    10.1002/pc.21145
  347. Campilho, R.D.S.G.; Banea, M.D.; Pinto, A.M.G.; Da Silva, L.F.M.; De Jesus, A.M.P.. "Strength prediction of single- and double-lap joints by standard and extended finite element modelling". International Journal of Adhesion and Adhesives 31 5 (2011): 363-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956136790&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.09.008
  348. Pinto, A.M.G.; Campilho, R.D.S.G.; Mendes, I.R.; Aires, S.M.; Baptista, A.P.M.. "Effect of hole drilling at the overlap on the strength of single-lap joints". International Journal of Adhesion and Adhesives 31 5 (2011): 380-387. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956155908&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2010.11.016
  349. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Comparative evaluation of bonded, welded and weldbonded structural joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 6-13.
    Published
  350. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mechanical characterization of a high temperature epoxy adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 58-62.
    Published
  351. Banea, M.D.; De Sousa, F.S.M.; Da Silva, L.F.M.; Campilho, R.D.S.G.; De Pereira, A.M.B.. "Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 25 18 (2011): 2461-2474. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052615334&partnerID=MN8TOARS.
    10.1163/016942411X580144
  352. Campilho, R.D.S.G.; Banea, M.D.; da Silva, L.F.M.. "Comparative evaluation of bonded, welded and weldbonded structural joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 5-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859352202&partnerID=MN8TOARS.
  353. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Mechanical characterization of a high temperature epoxy adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 58-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859324938&partnerID=MN8TOARS.
  354. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Barreto, A.M.J.P.; Domingues, J.J.M.S.. "Adhesively bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches". Journal of Adhesion 86 5-6 (2010): 649-670. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953648463&partnerID=MN8TOARS.
    10.1080/00218464.2010.484318
  355. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Barreto, A.M.J.P.; Morais, J.J.L.; Domingues, J.J.M.S.. "Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining". Construction and Building Materials 24 4 (2010): 531-537. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049085201&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2009.10.006
  356. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; Silva, L.F.M.; Chousal, J.A.G.; Baptista, A.P.M.. "Shear modulus and strength of an acrylic adhesive by the Notched Plate Shear Method (Arcan) and the Thick Adherend Shear Test (TAST)". Materials Science Forum 636-637 (2010): 787-792. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649124558&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.787
  357. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Strength prediction of adhesively-bonded scarf repairs in composite structures under bending". Materials Science Forum 636-637 (2010): 233-238. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649108189&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.233
  358. Banea, M.D.; Da Silva, L.F.M.; Campilho, R.D.S.G.. "Temperature dependence of the fracture toughness of adhesively bonded joints". Journal of Adhesion Science and Technology 24 11-12 (2010): 2011-2026. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956562666&partnerID=MN8TOARS.
    10.1163/016942410X507713
  359. Pinto, A.M.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Mendes, I.R.. "Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures". International Journal of Adhesion and Adhesives 30 5 (2010): 329-337. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955230130&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.11.001
  360. Ramantani, D.A.; Campilho, R.D.S.G.; de Moura, M.F.S.F.; Marques, A.T.. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". Journal of Sandwich Structures and Materials 12 3 (2010): 369-390. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952144546&partnerID=MN8TOARS.
    10.1177/1099636209104520
  361. Barreto, A.M.J.P.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Morais, J.J.L.; Santos, C.L.. "Repair of wood trusses loaded in tension with adhesively bonded carbon-epoxy patches". Journal of Adhesion 86 5-6 (2010): 630-648. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953640308&partnerID=MN8TOARS.
    10.1080/00218464.2010.484316
  362. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Testing of RTV silicone adhesives for high temperature applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 21 (2010): 31-37.
    Published
  363. Ramantani, D.A.; de Moura, M.F.S.F.; Campilho, R.D.S.G.; Marques, A.T.. "Fracture characterization of sandwich structures interfaces under mode I loading". Composites Science and Technology 70 9 (2010): 1386-1394. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953705429&partnerID=MN8TOARS.
    10.1016/j.compscitech.2010.04.018
  364. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Pinto, A.M.G.; Ramantani, D.A.. "Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II". Materials Science Forum 636-637 (2010): 1518-1524. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649128690&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.1518
  365. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; De Moura, M.F.S.F.; Baptista, A.P.M.. "Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends". Materials Science Forum 636-637 (2010): 1157-1164. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649104294&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.636-637.1157
  366. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures". Composites Science and Technology 70 2 (2010): 371-379. http://www.scopus.com/inward/record.url?eid=2-s2.0-73149100343&partnerID=MN8TOARS.
    10.1016/j.compscitech.2009.11.010
  367. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Amaro, A.M.; Reis, P.N.B.. "Interlaminar and intralaminar fracture characterization of composites under mode I loading". Composite Structures 92 1 (2010): 144-149. http://www.scopus.com/inward/record.url?eid=2-s2.0-70349439010&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.07.012
  368. Banea, M.D.; da Silva, L.F.M.; Campilho, R.D.S.G.. "Testing of RTV silicone adhesives for high temperature applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 21 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-79951686784&partnerID=MN8TOARS.
  369. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Pinto, A.M.G.; Morais, J.J.L.; Domingues, J.J.M.S.. "Modelling the tensile fracture behaviour of CFRP scarf repairs". Composites Part B: Engineering 40 2 (2009): 149-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849088376&partnerID=MN8TOARS.
    10.1016/j.compositesb.2008.10.008
  370. de Moura, M.F.S.F.; Fernandez, M.V.C.; de Morais, A.B.; Campilho, R.D.S.G.. "Numerical analysis of the Edge Crack Torsion test for mode III interlaminar fracture of composite laminates". Engineering Fracture Mechanics 76 4 (2009): 469-478. http://www.scopus.com/inward/record.url?eid=2-s2.0-60649090383&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2008.10.004
  371. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Barreto, A.M.J.P.; Morais, J.J.L.; Domingues, J.J.M.S.. "Fracture behaviour of damaged wood beams repaired with an adhesively-bonded composite patch". Composites Part A: Applied Science and Manufacturing 40 6-7 (2009): 852-859. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349091174&partnerID=MN8TOARS.
    10.1016/j.compositesa.2009.04.007
  372. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Buckling behaviour of carbon-epoxy adhesively-bonded scarf repairs". Journal of Adhesion Science and Technology 23 10-11 (2009): 1493-1512. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949815184&partnerID=MN8TOARS.
    10.1163/156856109X433045
  373. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Pure mode II fracture characterization of composite bonded joints". International Journal of Solids and Structures 46 6 (2009): 1589-1595. http://www.scopus.com/inward/record.url?eid=2-s2.0-59349112333&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2008.12.001
  374. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Domingues, J.J.M.S.. "Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes". International Journal of Adhesion and Adhesives 29 2 (2009): 195-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-56249102417&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2008.03.005
  375. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Ramantani, D.A.; Morais, J.J.L.; Domingues, J.J.M.S.. "Tensile behaviour of three-dimensional carbon-epoxy adhesively bonded single- and double-strap repairs". International Journal of Adhesion and Adhesives 29 6 (2009): 678-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349241275&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.02.004
  376. Pinto, A.M.G.; Magalhães, A.G.; Campilho, R.D.S.G.; de Moura, M.F.S.F.; Baptista, A.P.M.. "Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive". Journal of Adhesion 85 6 (2009): 351-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349105062&partnerID=MN8TOARS.
    10.1080/00218460902880313
  377. De Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Mixed-mode cohesive damage model applied to the simulation of the mechanical behaviour of laminated composite adhesive joints". Journal of Adhesion Science and Technology 23 10-11 (2009): 1477-1491. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949872458&partnerID=MN8TOARS.
    10.1163/156856109X433036
  378. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Gonçalves, J.P.M.. "Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading". Composites Science and Technology 68 10-11 (2008): 2224-2230. http://www.scopus.com/inward/record.url?eid=2-s2.0-44749087315&partnerID=MN8TOARS.
    10.1016/j.compscitech.2008.04.003
  379. Campilho, R.D.S.G.; de Moura, M.F.S.F.; Domingues, J.J.M.S.. "Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs". International Journal of Solids and Structures 45 5 (2008): 1497-1512. http://www.scopus.com/inward/record.url?eid=2-s2.0-38049067010&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2007.10.003
  380. De Moura, M.F.S.F.; Gonçalves, J.P.M.; Chousal, J.A.G.; Campilho, R.D.S.G.. "Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints". International Journal of Adhesion and Adhesives 28 8 (2008): 419-426. http://www.scopus.com/inward/record.url?eid=2-s2.0-49749110781&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2008.04.004
  381. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.; Morais, J.J.L.. "Computational modelling of the residual strength of repaired composite laminates using a cohesive damage model". Journal of Adhesion Science and Technology 22 13 (2008): 1565-1591. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849128346&partnerID=MN8TOARS.
    10.1163/156856108X309576
  382. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Ramantani, D.A.; Gonçalves, J.P.M.. "Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method". Ciência e Tecnologia dos Materiais 20 (2008): 81-86.
    Published
  383. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Modelação numérica de reparações por sobreposição simples e dupla em materiais compósitos". Mecânica Experimental 15 (2008): 103-116.
    Published
  384. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model". Journal of Adhesion Science and Technology 21 9 (2007): 855-870. http://www.scopus.com/inward/record.url?eid=2-s2.0-34748816963&partnerID=MN8TOARS.
    10.1163/156856107781061477
  385. Campilho, R.D.S.G.. "Modelação da execução de reparações por sobreposição simples e dupla em materiais compósitos". Revista Iberoamericana de Ingeniería Mecânica 11 (2007): 35-52.
  386. Campilho, R.D.S.G.; De Moura, M.F.S.F.; Domingues, J.J.M.S.. "Efeito da geometria na resistência residual à tracção de juntas reparadas de sobreposição simples de carbono-epóxido". Ciência e Tecnologia dos Materiais 19 (2007): 68-74.
    Published
  387. Campilho, R.R.D.S.G.; de Moura, M.M.F.S.F.; Domingues, J.J.M.S.. "Modelling single and double-lap repairs on composite materials". Composites Science and Technology 65 13 (2005): 1948-1958. http://www.scopus.com/inward/record.url?eid=2-s2.0-23144463539&partnerID=MN8TOARS.
    10.1016/j.compscitech.2005.04.007
Journal issue
  1. Mourtzis D; Rincon LM; Campilho, Raul; Simas H; Simoni R. "Industrial robots: Present and future perspectives". Machines (MDPI) (2025): https://www.mdpi.com/journal/machines/special_issues/0NG8IX1NJX.
    Under revision • Coeditor
  2. Silva FJG; Campilho, Raul; Pinto AMG; Sousa VC; Pereira AB. "Smart manufacturing and processes optimization: Toward more sustainable production systems". Machines (MDPI) (2024): https://www.mdpi.com/journal/machines/special_issues/903TZ731CX.
    Under revision • Coeditor
  3. Campilho, Raul. "Experimental testing, manufacturing and numerical modelling of composite and sandwich structures". Materials (MDPI) (2024): https://www.mdpi.com/journal/materials/special_issues/9OY45YO828.
    Under revision • Editor
  4. Campilho, Raul. "Abstracts book of ISSDA 2023, The International Symposium on Structural Dynamics of Aerospace". Journal of Physics: Conference Series (2024):
    Under revision • Editor
  5. Vadudev H; Campilho, Raul; Kumar S. "Role of computing and numerical modelling in the sustainable product design and development". International Journal on Interactive Design and Manufacturing (2024):
    Under revision
  6. Campilho, Raul. "Advances in the Experimentation and Numerical Modeling of Material Joining Processes (Second Edition)". Materials (MDPI) (2024): https://www.mdpi.com/journal/materials/special_issues/1FIAO0F8X0.
    Under revision • Editor
  7. Campilho, Raul. "Recent Developments in Machine Design, Automation and Robotics". Machines (MDPI) (2024): https://www.mdpi.com/journal/machines/special_issues/SBK53621ME.
    Under revision • Editor
  8. Campilho, Raul. "Innovations in Manufacturing Processes and Systems for Sustainable Practices". Processes (MDPI) (2024): https://www.mdpi.com/journal/processes/special_issues/LQ915KB0FQ.
    Under revision • Editor
  9. Li R; Mohamed MS; Tian C; Campilho, Raul. "AMMSA 2023, International Conference on Applied Mathematics, Modeling and Statistics Application". Journal of Physics: Conference Series (2023):
    Published • Editor
  10. Campilho, Raul. "Advances in the experimentation and numerical modelling of material joining processes". Materials (MDPI) (2023): https://www.mdpi.com/journal/materials/special_issues/modeling_joining.
    Published • Editor
  11. Silva FJG; Campilho, Raul; Pinto CMA. "Advances in manufacturing sustainability in the industry 4.0 era". Sustainability (MDPI) (2023): https://www.mdpi.com/journal/sustainability/special_issues/advances_manufacturing_sustainability.
    Published • Coeditor
  12. Silva FJG; Campilho, Raul. "Advances in flexible production". Journal of Testing and Evaluation (2023):
    Accepted • Coeditor
  13. Silva FJG; Campilho, Raul. "Materials, processes, and procedures: looking for a more sustainable world". Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science (2023):
    Under revision • Coeditor
  14. Campilho, Raul. "Design of adhesive bonded joints". Processes (MDPI) (2023): https://www.mdpi.com/journal/processes/special_issues/adhesive_bonded_joints.
    Published • Editor
  15. Campilho, Raul; Silva FJG. "Industrial process improvement by automation and robotics". Machines (MDPI (2023): https://www.mdpi.com/journal/machines/special_issues/indusctrial_process_automation.
    Published • Editor
  16. Campilho, R.D.S.G.. "Advanced characterization of adhesive joints and adhesives". Materials (MDPI) (2021): https://www.mdpi.com/journal/materials/special_issues/Adhesive_Joints.
    Published • Editor
Website
  1. Campilho, Raul. Raul Campilho Professional Webpage. 2023. https://sites.google.com/view/campilho.

Other

Other output
  1. Academic editor of the scientific journal Academia Engineering since January/2023. 2023. Campilho, Raul.
  2. Editor of the scientific journal PriMera Scientific Engineering since April/2023. 2023. Campilho, Raul.
  3. Academic editor of the scientific journal Journal of Engineering Research and Reports since April/2023. 2023. Campilho, Raul.
  4. Academic editor of the scientific journal Academia Materials Science since June/2023. 2023. Campilho, Raul.
  5. Academic editor of the scientific journal Academia Green Energy since August/2023. 2023. Campilho, Raul.
  6. Editor-in-Chief of the scientific journal Academia Materials Science since September/2023. 2023. Campilho, Raul.
  7. Review editor of the scientific journal Frontiers in Manufacturing Technology since March/2022. 2022. Campilho, Raul.
  8. Associate Editor of the scientific journal Journal of Applied and Computational Mechanics between 2016 and 2018. 2016. Campilho, Raul.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023 Numerical evaluation of the adhesive effect on the peel strength of aluminium T-joints IGF27, 27th International Conference on Fracture and Structural Integrity
2023 Parametric analysis of double-lap composite adhesive joints under impact loads IGF27, 27th International Conference on Fracture and Structural Integrity
2023 Improvement of the manufacturing process of active pharmaceutical ingredients ICQIS2023, 4th International Conference on Quality, Innovation and Sustainability
2023 Productivity improvement of control cable manufacturing equipment for the automotive industry ICQIS2023, 4th International Conference on Quality, Innovation and Sustainability
2023 Design and validation of fixation points of polymeric components for the automotive industry FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023 Process improvement in Zamak injection machines for automotive component fabrication FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023 Design and validation of gripper solution using soft robotics principles MESIC2023, Manufacturing Engineering Society International Conference
2023 Development of quality assurance system in the automotive industry MESIC2023, Manufacturing Engineering Society International Conference
2023 Parametric cohesive zone analysis of bi-adhesive single-step joints AB2023, 7th International Conference on Structural Adhesive Bonding
2023 Impact loading analysis of double-lap composite bonded joints AB2023, 7th International Conference on Structural Adhesive Bonding
2023 Productivity improvement of control cable manufacturing equipment for the automotive industry MD2023, International Conference on Machine Design
2023 Design of a connector assembly equipment for the automotive industry MD2023, International Conference on Machine Design
2023 Design and sizing of an automatic wire feeding welding machine MD2023, International Conference on Machine Design
2023 Study of different initiation and propagation criteria in the XFEM modelling of scarf adhesive joints IWPDF2023, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
2023 Cohesive zone evaluation of different design solutions for adhesive joints in canoeing boats IWPDF2023, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
2023 Effect of adhesive type on the tensile behaviour of tubular scarf adhesive joints IGF27, 27th International Conference on Fracture and Structural Integrity
2023 Numerical estimation of peel strength of adhesive joints via the floating roller peel test IGF27, 27th International Conference on Fracture and Structural Integrity
2023 Radial point interpolation methods in a structural dynamic analysis DCE23, 5th Doctoral Congress in Engineering
2023 Meshless analysis of fracture propagation in DCB adhesive joints DCE23, 5th Doctoral Congress in Engineering
2023 Experimental characterization of self-healing composite structures to low and high-velocity impact applications DCE23, 5th Doctoral Congress in Engineering
2023 Low and high-velocity impact evaluation of self-regenerating sandwich structures by FEM DCE23, 5th Doctoral Congress in Engineering
2023 An extended comprehensive review of INCONEL® alloy’s non-conventional machining processes DCE23, 5th Doctoral Congress in Engineering
2023 A review of injection-mould materials and their conventional and non-conventional machining processes DCE23, 5th Doctoral Congress in Engineering
2023 Compaction analysis in composite material processing by the vacuum infusion process DCE23, 5th Doctoral Congress in Engineering
2023 A review of INCONEL® alloy's non-conventional machining processes FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023 Wear behavior analysis of TiN/TiAlN coated tools in milling of Inconel 718 FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023 Studying the machining performance of single and multi-layered TiAlSiN coated tools deposited by HiPIMS FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023 Simulation of mode II fracture propagation in adhesive joints using a meshless technique ICCS26, 26th International Conference on Composite Structures
2023 Structural dynamic analysis of an adhesive joint ICCS26, 26th International Conference on Composite Structures
2023 Impact analysis of an adhesive joint using a meshless method ICSI2023, 5th International Conference on Structural Integrity
2023 Application of the dual-adhesive technique for static improvement of single step joints ICSI2023, 5th International Conference on Structural Integrity
2023 eXtended Finite Element Method applied to the tensile strength evaluation of scarf adhesive joints ICSI2023, 5th International Conference on Structural Integrity
2023 2D and 3D wires formability for car seats: A novel full-automatic equipment concept towards high productivity and flexibility MD2023, International Conference on Machine Design
2023 A novel full-automatic concept to produce Bowden cables first subset improving productivity, flexibility, and safety MD2023, International Conference on Machine Design
2023 A new model for increasing economic and environmental sustainability in cutting abrasive discs from rectangular shapes MD2023, International Conference on Machine Design
2023 Influence of laser marking parameters in the DMC code on the quality of PBT/glass fibre composite surface analysed by SEM MD2023, International Conference on Machine Design
2023 Computer application for electric network management of an industrial company MD2023, International Conference on Machine Design
2023 Lifespan increase of electrical terminal crimping tools for the automotive industry MD2023, International Conference on Machine Design
2023 Die casting thermal diffusion study through the Natti Gunter process MD2023, International Conference on Machine Design
2023 Structural analysis of adhesive joints using meshless methods CILAMCE2023, The XLIV Ibero-Latin American Congress on Computational Methods in Engineering
2023 A brief review of INCONEL® alloys numerical analysis on traditional machining predictability ISM 2023, International Conference on Industry 4.0 and Smart Manufacturing
2023 Advances in characterization and modelling of composite bonded joints and sandwich structures (keynote presentation) 8ICLSHSCW, 8th International Congress on Life, Social, and Health Sciences in a Changing World
2023 Product design and structural verification for the automotive component industry (keynote presentation) 7INYARC, 7th International New York Academic Research Congress on Life, Engineering, and Applied Sciences
2023 Concepts for the improvement of competitiveness in the automotive industry (keynote presentation) 3IACLEAS, 3rd International Acharaka Congress on Life, Engineering, and Applied Sciences
2023 Project improvement of a hydraulic guillotine in the manufacturing and assembly processes (keynote presentation) 9ICLEAS, 9th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023 Design and validation of an innovative soft-robotics gripper solution (keynote presentation) 9IBCLEAS, 9th International Baskent Congress on Life, Engineering, and Applied Sciences
2023 Advanced numerical techniques for static strength prediction of adhesively-bonded composite joints (keynote presentation) ICMSN2023, International Conference on Materials Science and Nanotechnology
2023 Development of new solutions for hydraulic press brakes (keynote presentation) 8INYARC, 8th International New York Academic Research Congress on Life, Engineering and Applied Sciences
2023 Product design and structural verification of autonomous underwater vehicle (AUV) components (keynote presentation) 4IAchCLEAS, 4th International Acharaka Life, Social, and Health Sciences Congress
2023 Advances in computational modelling of bonded composite and sandwich structures (keynote presentation) CMME2023, International Conference on Computational and Mathematical Methods in Engineering
2023 Press brake design by Lean/Design for eXcellence principles – Fabrication and assembly processes (keynote presentation) MMSE2023, 9th International Conference on Advances in Machinery, Materials Science and Engineering Applications
2023 Experimental and cohesive zone evaluation of the floating roller peel test on structural adhesives (keynote presentation) 10ICLEAS, 10th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023 Proposal and design of a pallet rotary table for automatic warehouses (keynote presentation) 4IAzCLEAS, 4th International Azerbaijan Congress on Life and Applied Sciences
2023 Evaluation of different numerical techniques based on fracture mechanics for strength prediction of adhesively-bonded joints (keynote presentation) 5IACLEAS, 5th International Artemis Congress on Life, Engineering and Applied Sciences
2023 Numerical modelling of composite bonded joints and sandwich structures under impact loads (keynote presentation) PCM2023, 10th Global Conference on Polymer and Composite Materials
2023 Design of component detection equipment for the automotive industry (keynote presentation) 5IAchCLEAS, 5th International Acharaka Congress on Life, Engineering, and Applied Sciences
2023 Numerical dynamic fracture modelling of advanced composite structures (keynote presentation) GSEAME2023, 3rd Global Summit and Expo on Aerospace and Mechanical Engineering
2023 Recent developments in automated robotic cells for the automotive components industry (keynote presentation) 11ICLEAS, 11th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023 Analysis of damage and repaired structures using combined XFEM+CZM and XFEM+VCCT techniques (keynote presentation) 3IACLEAS, 3rd International Acharaka Congress on Life, Engineering, and Applied Sciences
2023 Evaluation of the optimal tubular adhesive joint geometry for structural applications (keynote presentation) 3IArtCLEAS, 3rd International Artemis Congress on Life, Engineering, and Applied Sciences
2023 Strength improvement of adhesively-bonded scarf repairs in aluminium structures with external reinforcements (keynote presentation) 4IACLEAS, 4th International Artemis Congress on Life, Engineering, and Applied Sciences
2023 Influence of bonding defects on the tensile strength of composite bonded joints (keynote presentation) 5IACLEAS, 5th International Artemis Congress on Life, Engineering and Applied Sciences
2022 Cohesive zone parameter influence on the impact strength of steel adhesive joints MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
(Catania, Italy)
2022 Adhesively-bonded T-joint cohesive zone analysis using dual-adhesives MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
(Catania, Italy)
2022 Numerical evaluation of tensile-loaded tubular scarf adhesive joints MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
(Catania, Italy)
2022 Design and validation of mixed-mode device for fracture toughness analysis of adhesive joints MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
(Turim, Italy)
2022 Validation of theoretical models for the strength prediction of tubular adhesive joints MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
(Catania, Italy)
2022 Cohesive zone analysis of torsional tubular joints with an epoxy adhesive MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
(Catania, Italy)
2022 Static strength prediction of curved composite joints under internal pressure IAA2022, 2nd International Conference on Industrial Applications of Adhesives
2022 Die casting process improvement in automotive bowden cable manufacture ICQIS2022, 3rd International Conference on Quality, Innovation and Sustainability
2022 Process improvement in the fabrication of spiral cables for the automotive industry ICQIS2022, 3rd International Conference on Quality, Innovation and Sustainability
2022 Design of a spiral double-cutting machine for an automotive bowden cable assembly line EM2022, 1st International Conference on Engineering Manufacture
2022 Improving the efficiency of the bowden cable terminal injection process for the automotive industry EM2022, 1st International Conference on Engineering Manufacture
2022 Development of a rotation and lifting system for pallet rotary tables FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022 Adaptation of a welding frame for a tube cutting machine FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022 Adhesive type Effect on adhesively-bonded aluminium T-joints MDA 2022, 4th International Conference on Materials Design and Applications
2022 Evaluation of the CLS test for mixed-mode fracture toughness estimation of adhesive joints MDA 2022, 4th International Conference on Materials Design and Applications
2022 Numerical evaluation of impact-loaded double-lap joints by cohesive modelling ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022 Analysis of bi-adhesive single-lap joints under an impact tensile load ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022 Mixed-mode fracture behaviour of structural adhesives by the cracked-lap shear specimen ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022 Hyperelastic behaviour of adhesives and its Effect on bonded joints IAA2022, 2nd International Conference on Industrial Applications of Adhesives
2022 Investigations on the wear performance of coated tools in machining UNS S32101 duplex stainless steel Materiais 2022, XI International Materials Symposium | XX Portuguese Materials Society Meeting
2022 SMED applied to tire calibration procedures EM2022, 1st International Conference on Engineering Manufacture
2022 Improving the cut surface quality by optimizing parameters in the fibre laser cutting process EM2022, 1st International Conference on Engineering Manufacture
2022 A novel robotic manipulator concept for managing the winding and extraction of wire coils EM2022, 1st International Conference on Engineering Manufacture
2022 Increasing the sustainability of manufacturing processes in plastic injection: recovering out-of-service robots to eliminate manual assembly operations EM2022, 1st International Conference on Engineering Manufacture
2022 Milling a titanium alloy using different machining strategies: A comparative study on tool wear, tool life and performance FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022 Optimizing the Ag filler metal content on TIG welding of Cu-Cu and Cu-Steel pipes joints for carbon dioxide refrigeration plants FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022 Study of the influence of laser welding parameters on the weld quality and microstructure of S355 structural steel FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022 Thermal analysis of steel profiles under fire: the lumped capacitance method vs the finite element method M2D2022, 9th International Conference on Mechanics and Materials in Design
2022 A meshless crack propagation algorithm extended to mode II loading of adhesive joints ICCS25, 25th International Conference on Composite Structures
2022 Modal analysis of adhesive joints using a radial point interpolation method ICCS25, 25th International Conference on Composite Structures
2022 Geometry effect on the static strength of curved composite bonded joints ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022 Numerical analysis of the adhesive effect on the behavior of T-adhesive joints ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022 Adhesive material effect on the tensile response of aluminum tubular joints ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022 Strength prediction of adhesive joints by cohesive zone models (keynote presentation) 10IISRC, X International Istanbul Scientific Research Congress
2022 Numerical analysis of adhesively-bonded joints in composite materials (keynote presentation) PCM2022, 9th Global Conference on Polymer and Composite Materials
2022 State-of-the-art and future trends in numerical modelling of adhesive joints (keynote presentation) 6INYARC, 6th International New York Academic Research Congress
2022 Analysis of adhesively bonded stepped-lap joints (keynote presentation) 2IACLSHSS, 2nd International Artemis Congress on Life, Social, Health, and Sports Sciences
2021 Numerical analysis of geometrical modification combinations of the tensile strength of tubular adhesives joints IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Composite stepped-lap adhesive joint analysis by cohesive zone modelling IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Numerical analysis by XFEM of hybrid T-peel joints IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Geometry and adhesive optimization of single-lap adhesive joints under impact AB2021, 6th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2021 Experimental and cohesive zone modelling study on joining of sheet moulding compound and carbon-epoxy composites AB2021, 6th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2021 Geometrical study of adhesively-bonded T-joints by cohesive models ICSI2021, Virtual 4th International Conference on Structural Integrity
2021 Adherend effect on the peel strength of a brittle adhesive ICSI2021, Virtual 4th International Conference on Structural Integrity
2021 Numerical simulation of adhesively-bonded T-stiffeners by cohesive zone models FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing
2021 Evaluation of T-joints in aluminium structures under different geometries FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing
2021 Design of a buried equipment for the collection of urban solid waste MD2021, International Conference on Machine Design
(Porto, Portugal)
2021 Robotized cell design for component assembly in the automotive industry MD2021, International Conference on Machine Design
(Porto, Portugal)
2021 Cohesive zone parametric analysis in the impact strength of tubular adhesive joints AJP2021, 2nd International Conference on Advanced Joining Processes
(Sintra)
2021 Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness AJP2021, 2nd International Conference on Advanced Joining Processes
(Sintra)
2021 Analysis of the stress singularity in composite adhesive joints ICOMP2021, 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures
2021 Analytical and numerical methodologies to study four different hot-rolled steel profiles under fire SYMCOMP2021, 5th International Conference on Numerical and Symbolic Computation Developments and Applications
(Évora)
2021 Non-linear analysis of adhesive joints by using meshless methods 2nd International Colloquium of Aerospace Research
(Mexicali, Mexico)
2021 Meshless approach to material plasticity in adhesive joints IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Impact loading analysis of tubular adhesive joints IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Meshless and hyper-elastic implementation to analyse flexible adhesives IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Applying the dual adhesive technique for strength improvement of bonded joints IGF26, 26th International Conference on Fracture and Structural Integrity
(Turim, Italy)
2021 Meshless analysis of the stress singularity in composite adhesive joints ICCS24, 24th International Conference on Composite Structures
(Porto, Portugal)
2021 Three-dimensional numerical analysis of tubular adhesive joints under torsional loads MESIC2021, Manufacturing Engineering Society International Conference
2021 Modelling adhesively-bonded T-joints by a meshless method MESIC2021, Manufacturing Engineering Society International Conference
2021 Intensity of singular stress fields in single lap joints using the radial point interpolation method DCE21, 4th Doctoral Congress in Engineering
(Porto, Portugal)
2021 Topology optimization using a bi-directional evolutionary algorithm combined with the NNRPIM DCE21, 4th Doctoral Congress in Engineering
(Porto, Portugal)
2021 A new structural two-component epoxy adhesive: Strength and fracture characterization FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing
2021 A novel modular design on an equipment to produce “T”-profiles by laser welding FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing
2021 Automation of the discharge process in the over-injection of conduits for Bowden cables MD2021, International Conference on Machine Design
(Porto, Portugal)
2021 Expanding features of automated equipment: a new concept for a transfer system of lengthy and low-stiffness products for automobiles MD2021, International Conference on Machine Design
(Porto, Portugal)
2021 A novel concept of equipment for Bowden cables manufacturing MD2021, International Conference on Machine Design
(Porto, Portugal)
2021 Study of the influence of laser welding parameters on the weld quality and microstructure of S355 structural steel AJP2021, 2nd International Conference on Advanced Joining Processes
(Sintra)
2021 Optimization of the Ag filler metal content on the TIG welding of Cu-Cu and Cu-Steel pipes joints for carbon dioxide refrigeration plants AJP2021, 2nd International Conference on Advanced Joining Processes
(Sintra)
2021 Non-linear analysis of adhesive joints by using meshless methods (keynote presentation) 2nd International Colloquium of Aerospace Research
2020 Numerical modelling and experimental validation of step bonded joints VCSI2020, First Virtual Conference on Structural Integrity
2020 Mixed-mode fracture toughness of a structural adhesive by the single-leg bending test VCSI2020, First Virtual Conference on Structural Integrity
2020 Bonded structures improvement by the dual adhesive technique VECF1, 1st Virtual European Conference on Fracture
2020 Mixed-mode evaluation of ductile adhesive joints by the single-leg bending test VECF1, 1st Virtual European Conference on Fracture
2020 Composite stepped-lap adhesive joint analysis by cohesive zone modelling FFW2020, The 8th International Conference on Fracture, Fatigue and Wear
2020 Applying the dual adhesive technique for strength improvement of bonded joints FFW2020, The 8th International Conference on Fracture, Fatigue and Wear
2020 Development of an elasto-plastic meshless technique to analyse bonded structures IAA2020, 1st International Conference on Industrial Applications of Adhesives
(Funchal, Portugal)
2020 Analysing single-lap joints bonded with a brittle adhesive by an elastic meshless method VECF1, 1st Virtual European Conference on Fracture
2020 Strength prediction of composite single lap joints using a meshless method ICCS23, 23th International Conference on Composite Structures
(Porto, Portugal)
2020 Parametric study of fatigue crack growth in cracked finite plates MDA 2020, 3rd International Conference on Materials Design and Applications
(Porto, Portugal)
2020 Parametric study of composite curved adhesive joints MDA 2020, 3rd International Conference on Materials Design and Applications
(Porto, Portugal)
2019 Numerical analysis of stepped-lap adhesive joints in composite structures Materiais 2019, X International Materials Symposium | XIX Portuguese Materials Society Meeting
(Lisboa, Portugal)
2019 Modelling of tubular adhesively-bonded joints by the Extended Finite Element Method MESIC2019, 8th Manufacturing Engineering Society International Conference
(Madrid, Spain)
2019 Impact modelling of single-lap bonded joints by cohesive zone modelling MESIC2019, 8th Manufacturing Engineering Society International Conference
(Madrid, Spain)
2019 Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Comparison of different test configurations for the shear fracture toughness evaluation of a ductile adhesive FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Effect of material hybridization on the strength of scarf adhesive joints FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Fracture envelope estimation of a structural adhesive by dedicated fracture tests FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
2019 Evaluation of the extended finite element method for the analysis of bonded joints with different geometries FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Comparative evaluation of different fracture tests for the tensile fracture toughness of a ductile adhesive FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Static strength improvement of tubular aluminium adhesive joints by the outer chamfering technique FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Process improvement in the metallic mesh cutting operation associated to tire manufacturing FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Design of automated equipment for the assembly of automotive parts FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Reduction of scrap percentage of cast parts by optimizing the process parameters FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Design of a modular solution for na autonomous vehicle for cargo transport and handling FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Adhesive thickness effects on the mixed-mode fracture toughness of bonded joints AB2019, 5th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2019 Strength prediction of adhesively-bonded single-lap joints by advanced discretization techniques AB2019, 5th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2019 Rethinking modular jigs’ design regarding the optimization of machining times FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Improving the cut surface quality by optimizing parameters in the fibre laser cutting process FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Influence of the natural additive on natural fiber reinforced thermoplastic composite FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 A strategic model to take the first step towards industry 4.0 in SMEs FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Influence of textile rope tension in cap ply production FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Asset priority setting for maintenance management in the food industry FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Perceptions and behaviors with regard to eco-packaging: a case study FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Improvement and validation of Zamak die casting moulds FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Improving intra-logistic flow by physical and digital pathways FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 A novel concept of a conduit transport system FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Designing a novel and greener asphalt container FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Analysis and improvement of an assembly line in the automotive industry FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Continuous improvement in maintenance: a case study in the automotive industry involving Lean tools FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Designing a novel system for the introduction of lubricant in control cables for the automotive industry FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Intralogistics and industry 4.0: designing a novel shuttle with picking system FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
(Limerick, Ireland)
2019 Adherend material effect on the tensile strength on adhesive bonded tubular joints DCE19, 2nd Doctoral Congress in Engineering
(Porto, Portugal)
2019 Using radial point interpolation meshless methods to analyse adhesive single-lap joints DCE19, 2nd Doctoral Congress in Engineering
(Porto, Portugal)
2019 Parametric analysis of curved adhesive joints in composite structures ICCS22, 22th International Conference on Composite Structures
(Wuhan, China)
2019 Análisis structural de juntas adhesivas usando métodos sin malla 1er Coloquio Internacional de la Universidad Autónoma de Baja California
(Mexicali, Mexico)
2019 Análisis structural de juntas adhesivas usando métodos sin malla (keynote presentation) 1st International Colloquium of Aerospace Research
2018 Experimental and shear fracture characterization of adhesively-bonded joints HELIX2018, Regional Helix 2018 International Conference on Innovation, Engineering and Entrepeneurship
(Guimarães, Portugal)
2018 Evaluation of mixed-mode fracture in adhesively-bonded joints HELIX2018, Regional Helix 2018 International Conference on Innovation, Engineering and Entrepeneurship
(Guimarães, Portugal)
2018 Modelling stepped-lap adhesive joints by the extended finite element method TE2018, 25th International Conference on Transdisciplinary Engineering
(Modena, Italy)
2018 Geometrical optimization of axially loaded tubular adhesive joints by finite elements TE2018, 25th International Conference on Transdisciplinary Engineering
(Modena, Italy)
2018 Parametric study of adhesive joints under tensile impact loads by cohesive zone modelling MDA2018, 2nd International Conference on Materials Design and Applications
(Porto, Portugal)
2018 Adhesive selection for application in tubular adhesive joints by cohesive models MDA2018, 2nd International Conference on Materials Design and Applications
(Porto, Portugal)
2018 Numerical analysis of bonded joints by the extended finite element method NT2F18, 18th International Conference on New Trends in Fatigue and Fracture
(Lisboa, Portugal)
2018 Asymmetric tapered double-cantilever beam specimen to predict mixed-mode fracture of structural adhesives NT2F18, 18th International Conference on New Trends in Fatigue and Fracture
(Lisboa, Portugal)
2018 Mixed-mode fracture of bonded joints using the asymmetric tapered double-cantilever beam test IRF2018, 6th International Conference on Integrity, Reliability and Failure
(Lisboa, Portugal)
2018 Geometrical study of curved composite adhesive joints using cohesive zone models ICCS21, 21th International Conference on Composite Structures
(Bolonha, Italy)
2018 Extended finite element modelling of aluminium stepped-adhesive joints EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives
(Lisboa, Portugal)
2018 Application of a direct/cohesive zone method for the evaluation of scarf adhesive joints EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives
(Lisboa, Portugal)
2018 Development of a novel equipment for automated clothing manufacturing FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Injection mold design for a plastic component with blowing agent FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Improving an APEX machine involved in tires manufacturing process FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Experimental and numerical analysis of scarf aluminium adhesive joints FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Development of a numerical methodology for strength prediction of weld-bonded joints FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Comparison of different adhesively-bonded joint configurations for mechanical structures FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Designing a novel feeding system for CNC turning machines FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 A novel approach to optimize the design of parts for additive manufacturing FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
(Ohio, United States)
2018 Establishing guidelines to improve the high-presssure die casting process of complex aesthetic parts TE2018, 25th International Conference on Transdisciplinary Engineering
(Modena, Italy)
2018 Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation MDA2018, 2nd International Conference on Materials Design and Applications
(Porto, Portugal)
2018 Development of a cohesive zone element for adhesive joints subjected to fatigue and humudity degradation EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives
(Lisboa, Portugal)
2018 Reduction of scrap percentage of cast parts by optimizing the process parameters BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Numerical study of tubular adhesive joints by the Extended Finite Element Method BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Parametric study of curved adhesive joints in composite materials BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Experimental and numerical study of stepped adhesive joints with two adhesives BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Numerical and experimental study of the adhesion of SMC and prepreg BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Strength prediction of adhesively-bonded joints by advanced discretization techniques (NNRPIM) BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Use of the Extended Finite Element Method for the strength prediction of hybrid T-joints BS2018, 8th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2018 Fracture modelling of adhesively-bonded joints by an inverse method PCF2018, XVI Portuguese Conference on Fracture
(Covilhã, Portugal)
2018 Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints PCF2018, XVI Portuguese Conference on Fracture
(Covilhã, Portugal)
2018 Design of step bonded joints by the eXtended Finite Element Method PCF2018, XVI Portuguese Conference on Fracture
(Covilhã, Portugal)
2018 Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation PCF2018, XVI Portuguese Conference on Fracture
(Covilhã, Portugal)
2017 Strength prediction of adhesively-bonded joints with CZM laws estimated by digital image correlation SYMCOMP2017, 3rd International Conference on Numerical and Symbolic Computation: Developments and applications
(Guimarães, Portugal)
2017 Evaluation of the extended finitie element method to predict the mechanical behaviour of adhesively-bonded joints SYMCOMP2017, 3rd International Conference on Numerical and Symbolic Computation: Developments and applications
(Guimarães, Portugal)
2017 Validation of cohesive laws for static strength estimation of adhesively-bonded joints Materiais 2017, IX International Materials Symposium | XVIII Portuguese Materials Society Meeting
(Aveiro, Portugal)
2017 Experimental and cohesive zone modelling analysis of adhesively-bonded stepped joints M2D 2017, 7th International Conference on Mechanics and Materials in Design
(Albufeira, Portugal)
2017 Experimental and numerical analysis of adhesively-bonded T joints under peel loads MESIC2017, 7th Manufacturing Engineering Society International Conference
(Vigo, Spain)
2017 Validation of advanced numerical techniques for the strength prediction of adhesively-bonded joints MESIC2017, 7th Manufacturing Engineering Society International Conference
(Vigo, Spain)
2017 Experimental and numerical analysis of hybrid adhesively-bonded scarf joints AB2017, 4th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2017 Comparative evaluation of the ENF and 4ENF fracture tests for the shear toughness estimation of adhesive joints AB2017, 4th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2017 Detailed investigation of the analysis conditions in the evaluation of bonded joints by cohesive zones models FFW2017, International Conference on Fracture Fatigue and Wear
(Porto, Portugal)
2017 eXtended Finite Element Method applied to the strength prediction of adhesively-bonded joints FFW2017, International Conference on Fracture Fatigue and Wear
(Porto, Portugal)
2017 Numerical evaluation of the ENF and 4ENF tests for GIIC estimation of adhesive joints ICCS20, 20th International Conference on Composite Structures
(Paris, France)
2017 Optimization of adhesively-bonded joints for impact loading scenarios ICCS20, 20th International Conference on Composite Structures
(Paris, France)
2017 Numerical evaluation of the ENF and 4ENF tests to estimate the shear toughness (GIIC) of structural adhesives CIBEM2017, XIII Congresso Ibero-Americano de Engenharia Mecânica
(Lisboa, Portugal)
2017 Modelling of the DCB and TDCB tests for the tensile toughness (GIC) assessment of bonded joints CIBEM2017, XIII Congresso Ibero-Americano de Engenharia Mecânica
(Lisboa, Portugal)
2017 Mode I and II determination of CFRP as a function of temperature and strain rate DCE17, 2nd Doctoral Congress in Engineering
(Porto, Portugal)
2017 Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation DCE17, 2nd Doctoral Congress in Engineering
(Porto, Portugal)
2017 Optimizing a specific tool for electric terminals crimping process FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing
(Modena, Italy)
2017 Reducing the simulation cost on dual-phase steel stamping process FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing
(Modena, Italy)
2017 Solving quality problems in tyre production preparation process: a practical approach FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing
(Modena, Italy)
2017 A novel concept of production and assembly processes integration FAIM2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing
(Modena, Italy)
2017 Mode I and II determination of CFRP as a function of temperature and strain rate AB2017, 4th International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2017 Fracture toughness in mode I (GIC) for ductile adhesives FFW2017, International Conference on Fracture Fatigue and Wear
(Porto, Portugal)
2017 Validation of the eXtended Finite Element Method for the strength prediction of T-joints BS2017, 7th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2017 Numerical optimization of adhesive joints subjected to impact BS2017, 7th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2017 Determination of the fracture toughness of structural adhesives by the Asymmetric Tapered Double-Cantilever Beam (ATDCB) test BS2017, 7th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2017 Numerical parametric study of tubular adhesive joints under tensile loads BS2017, 7th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2017 Experimental and numerical comparison by cohesive zone models of various types of adhesive joints BS2017, 7th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2017 Improving the mobility of high loads in restricted spaces BS2017, 7th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Overview of different strength prediction techniques for single-lap bonded joints CEM2016, Mechanical Engineering Conference
(Porto, Portugal)
2016 Evaluation of different damage initiation and growth criteria in the cohesive zone modelling analysis of single-lap bonded joints CEM2016, Mechanical Engineering Conference
(Porto, Portugal)
2016 Use of the direct method for adhesives characterization applied to the strength prediction of double-lap joints CEM2016, Mechanical Engineering Conference
(Porto, Portugal)
2016 Evaluation of analytical and numerical techniques for the strength prediction of single-lap bonded joints with different adhesives MDA 2016, 1st International Conference on Materials Design and Applications
(Porto, Portugal)
2016 Numerical evaluation of the mixed-mode fracture of composite bonded joints IRF2016, 5th International Conference on Integrity, Reliability and Failure
(Porto, Portugal)
2016 Mixed-mode fracture toughness of bonded joints with diferente adhesives by the single-leg bending test ICCS19, 19th International Conference on Composite Structures
(Lisboa, Portugal)
2016 Strength and failure modes of composite bonded joints with adhesion defects ICCS19, 19th International Conference on Composite Structures
(Lisboa, Portugal)
2016 Aluminium-composite single-L joints: Experimentation and numerical analysis by the eXtended Finite Element Method ICCS19, 19th International Conference on Composite Structures
(Lisboa, Portugal)
2016 Strength and failure modes in composite bonded joints with defects CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos
(Rio de Janeiro, Brazil)
2016 Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation CLBA2016, Conferência Luso-Brasileira de Adesão e Adesivos
(Rio de Janeiro, Brazil)
2016 Geometrical study of mixed joints for high temperature aerospace applications CEM2016, Mechanical Engineering Conference
(Porto, Portugal)
2016 Mode I determination of CFRP as a function of temperature and strain rate MDA 2016, 1st International Conference on Materials Design and Applications
(Porto, Portugal)
2016 Mode I determination of CFRP as a function of temperature and strain rate MDA 2016, 1st International Conference on Materials Design and Applications
(Porto, Portugal)
2016 Influence of humidity on the static and fatigue response of adhesively bonded aluminium joints MDA 2016, 1st International Conference on Materials Design and Applications
(Porto, Portugal)
2016 Design and testing of ceramic-aluminium dual adhesive joints for high temperature applications MDA 2016, 1st International Conference on Materials Design and Applications
(Porto, Portugal)
2016 Increasing flexibility through new design concepts FAIM2016, 26th International Conference on Flexible Automation and Intelligent Manufacturing
(Seul, South Korea)
2016 Full-automated stator winding machine for switched reluctance motors FAIM2016, 26th International Conference on Flexible Automation and Intelligent Manufacturing
(Seul, South Korea)
2016 Process integration through automated sub-assembly line IRF2016, 5th International Conference on Integrity, Reliability and Failure,
(P, Portugal)
2016 Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation EURADH 2016, 11th European Adhesion Conference
(Glasgow, United Kingdom)
2016 Scarf bonded joints between different adherends BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Strength estimation of adhesively-bonded joints with cohesive laws estimated by the direct method BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Comparative evaluation of the ENF and 4ENF tests to estimate the shear toughness of adhesive joints BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Strength prediction of hybrid single-L adhesive joints BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Comparison of different modelling conditions in the strength prediction of bonded joints by cohesive models BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Solving quality problems in tire production preparation process: a practical approach BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Improving a machining process using hydraulic clamping tools BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Improving the quality and productivity of metallic wire rope assembly lines for automotive industry BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Improving the preparation stage of tires production: a practical approach BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 How to reduce non-conformities in the tire manufacturing extrusion process BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Optimizing a specific tool for electrical terminals crimping process BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Lean manufacturing applied to the steel belt cutting in tire manufacturing BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Problem anticipation and cost reduction in sheet metal forming processes of dual-phase advanced high strength steels BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Puerto Rico)
2016 Value analysis study regarding barrier mechanism for railway applications BS2016, 6th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2016 Application of the direct method for cohesive law estimation applied to the strength prediction of double-lap joints PCF 2016, XV Portuguese Conference on Fracture
(Paço d'Arcos, Portugal)
2016 Numerical evaluation of dissimilar cohesive models to predict the behaviour of double-cantilever beam specimens PCF 2016, XV Portuguese Conference on Fracture
(Paço d'Arcos, Portugal)
2015 Damage analysis of composite-aluminium adhesively-bonded single-lap joints ICCS18, 18th International Conference on Composite Structures
(Lisboa, Portugal)
2015 Modelling adhesively-bonded joints in composite structures by cohesive zone models ICCS18, 18th International Conference on Composite Structures
(Lisboa, Portugal)
2015 Fracture property determination in natural fibre composites ICCS18, 18th International Conference on Composite Structures
(Lisboa, Portugal)
2015 Shear fracture toughness and cohesive laws of adhesively-bonded joints Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting
(Porto, Portugal)
2015 Strength and failure modes of single-L adhesive joints between aluminium and composites Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting
(Porto, Portugal)
2015 Shear cohesive law estimation of adhesive layers by digital image correlation Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting
(Porto, Portugal)
2015 Comparative failure assessment of single and double-lap joints with varying adhesive systems AB2015, 3rd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2015 Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive joints AB2015, 3rd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2015 Numerical evaluation of the direct method for cohesive law extraction in shear by the End-Notched Flexure test ICSI 2015, 1st International Conference on Structural Integrity
(Funchal, Portugal)
2015 Comparative evaluation of single-lap joints bonded with different adhesives by cohesive zone modelling ICSI 2015, 1st International Conference on Structural Integrity
(Funchal, Portugal)
2015 Humidity effects on the fatigue behaviour of adhesively bonded aluminium DCB joints DCE 2015, 1st Doctoral Congress in Engineering
(Porto, Portugal)
2015 Adherend material effect on the tensile fracture toughness of modern tough structural adhesives Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting
(Porto, Portugal)
2015 Characterization of TEPS-modified adhesives Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting
(Porto, Portugal)
2015 Improving the assembling process of small automotive mechanical devices FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing
(Wolverhampton, United Kingdom)
2015 Increasing the productivity of a machining cell by means of automation: a case study FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing
(Wolverhampton, United Kingdom)
2015 A new dynamic holding system for thin metal plate shearing machines FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing
(Wolverhampton, United Kingdom)
2015 Solving quality problems through fully-automated assembly systems: a case study FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing
(Wolverhampton, United Kingdom)
2015 Full-automation applied to seat suspension mat production cells: a case study FAIM2015, 25th International Conference on Flexible Automation and Intelligent Manufacturing
(Wolverhampton, United Kingdom)
2015 Adherend material effect on the fracture behaviour of adhesive joints AB2015, 3rd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2015 Geometrical optimization of ceramic-aluminium dual adhesive joints AB2015, 3rd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2015 Humidity effects on the mechanical properties of adhesively bonded aluminium DCB joints AB2015, 3rd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2015 Debonding of adhesive joints: existing and emerging technologies COBEM 2015, 23rd ABCM International Congress of Mechanical Engineering
(Rio de Janeiro, Brazil)
2014 Tensile fracture properties of adhesive joints: comparison of standard and advanced techniques ICEFA VI, 6th International Conference on Engineering Failure Analysis
(Lisboa, Portugal)
2014 Adhesive thickness effects of a ductile adhesive by optical measurement techniques CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos
(Porto, Portugal)
2014 Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos
(Porto, Portugal)
2014 Characterization of a structural polyurethane adhesive modified with thermally expandable particles EURADH 2014, 10th European Adhesion Conference
(Alicante, Spain)
2014 Structural adhesives modified with thermal expandable particles CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos
(Porto, Portugal)
2014 Juntas adesivas compósitas CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos
(Porto, Portugal)
2014 Development of a cohesive zone model for adhesive joints that includes humidity and fatigue degradation CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos
(Porto, Portugal)
2014 Development of a cohesive zone model for adhesive joints that included humidity and fatigue degradation WCARP-V, 5th World Congress on Adhesion and Related Phenomena
(Nara, Japan)
2014 Adding value to metal shear machines through innovative tools BS2014, 4th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2014 Improving the competitiveness of a suspension mat production line BS2014, 4th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2014 Developing innovative tool holder systems for press-brake machines BS2014, 4th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2014 Door glass lifting mechanical devices: from manual to fully-automated assembly line BS2014, 4th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2014 Lean-manufacturing applied to a machining cell BS2014, 4th International Conference on Business Sustainability
(Póvoa de Varzim, Portugal)
2014 Advanced techniques for estimation of the tensile fracture toughness of adhesive joints PCF 2014, XIV Portuguese Conference on Fracture
(Vila Real, Portugal)
2014 Effects of adhesive thickness on the fracture of polyurethane adhesive joints PCF 2014, XIV Portuguese Conference on Fracture
(Vila Real, Portugal)
2013 Tensile fracture characterization of natural fibre composite joints by an optical measurement method Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting
(Coimbra, Portugal)
2013 Influence of the cohesive law shape of the adhesive layer on the predicted tensile strength of single-lap joints under different geometric conditions Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting
(Coimbra, Portugal)
2013 Numerical evaluation of adhesively-bonded scarf repairs with external reinforcements Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting
(Coimbra, Portugal)
2013 Tensile fracture properties of adhesively-bonded and co-cured joints in natural fibre composites ICCS17, 17th International Conference on Composite Structures
(Porto, Portugal)
2013 Jute fibre-reinforced composites: mechanical characterization in tension, shear and flexure ICCS17, 17th International Conference on Composite Structures
(Porto, Portugal)
2013 Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method ACE-X 2013, 7th International Conference on Advanced Computational Engineering and Experimenting
(Madrid, Spain)
2013 Specimen geometry influence on the tensile fracture toughness of a structural polyurethane adhesive AB2013, 2nd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2013 Strength prediction of bonded joints with the Finite Element Method and Cohesive Zone Models XIV Congreso de Adhesión y Adhesivos
(Porrino, Spain)
2013 Characterization of a structural adhesive by advanced numerical techniques XIV Congreso de Adhesión y Adhesivos
(Porrino, Spain)
2013 Development of a web application for the design of adhesive joints AB2013, 2nd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2013 Effect of adhesive thickness on mode I fracture toughness of a structural polyurethane adhesive for automotive applications XIV Congreso de Adhesión y Adhesivos
(Porrino, Spain)
2012 Experimental and Finite Element design of single-lap joints by adhesive-bonding, welding and hybrid joining YIC 2012, 1st European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference
(Aveiro, Portugal)
2012 Accuracy of adhesive joint strength predictions by finite element analyses IJSI 2012, 1st International Conference of the International Journal of Structural Integrity
(Porto, Portugal)
2012 Study and optimization of the single-lap and T-peel joints using the finite element method IJSI 2012, 1st International Conference of the International Journal of Structural Integrity
(Porto, Portugal)
2012 Fracture toughness determination of adhesive and co-cured joints in natural fibre composites ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting
(Istambul, Turkey)
2012 Experimental optimization of single-lap and T-peel joints by bonding, welding and hybrid joining ICEM15, 15th International Conference on Experimental Mechanics
(Porto, Portugal)
2012 Mechanical characterization of a high temperature epoxy adhesive IJSI 2012, 1st International Conference of the International Journal of Structural Integrity
(Porto, Portugal)
2012 Mechanical characterization and adhesive joints with natural fibre composites CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos
(Rio de Janeiro, Brazil)
2012 Smart adhesive joints CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos
(Rio de Janeiro, Brazil)
2012 Numerical modelling of adhesively-bonded joints: effect of the cohesive zone model parameters PCF 2012, XIII Portuguese Conference on Fracture
(Coimbra, Portugal)
2012 Modelling of composite bonded joints by the extended finite element method PCF 2012, XIII Portuguese Conference on Fracture
(Coimbra, Portugal)
2012 Fracture tests of adhesive joints bonded with a high temperature epoxy adhesive PCF 2012, XIII Portuguese Conference on Fracture
(Coimbra, Portugal)
2011 Influence of the cohesive law parameters on the strength prediction of adhesively-bonded joints Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting
(Guimarães, Portugal)
2011 Feasibility of the extended finite element method for the simulation of composite bonded joints Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting
(Guimarães, Portugal)
2011 Fibre-reinforced composite materials: an improvement in sustainability BS2011, Second International Conference on Business Sustainability 2011
(Póvoa de Varzim, Portugal)
2011 Numerical modelling of single-lap joints by cohesive zone models: influence of cohesive law parameters ICCS16, 16th International Conference on Composite Structures
(Porto, Portugal)
2011 Techniques for the repair of wood members by using adhesively-bonded carbon-epoxy patches ICCS16, 16th International Conference on Composite Structures
(Porto, Portugal)
2011 Experimental and finite element evaluation of spot welded-bonded single lap joints ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting
(Vilamoura, Portugal)
2011 Optimization study of hybrid spot welded-bonded single-lap joints AB2011, International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2011 Influência dos parâmetros coesivos na previsão de resistência de juntas adesivas CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica
(Porto, Portugal)
2011 Análise experimental e por elementos finitos de juntas de sobreposição simples híbridas (soldadas/adesivas) CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica
(Porto, Portugal)
2011 Numerical and experimental study of tensile strength of single and double-strap repairs Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting
(Guimarães, Portugal)
2011 Effect of temperature on the shear strength of aluminium single-lap bonded joints for high temperature applications AB2011, International Conference on Structural Adhesive Bonding,
(Porto, Portugal)
2010 Taper angle optimization of scarf repairs in carbon-epoxy laminates CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010
(Porto, Portugal)
2010 Strength prediction of single and double-lap joints by finite element modelling ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting
(Paris, France)
2010 Mode I fracture toughness of adhesively bonded joints in a high temperature environment CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010
(Porto, Portugal)
2010 Mode I Fracture Toughness of Adhesively Bonded Joints as a Function of Temperature: Experimental and Numerical Study ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting
(Paris, France)
2010 Strength improvement in single-lap joints by hole drilling at the overlap ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting
(Paris, France)
2010 Mode I fracture toughness prediction as a function of temperature for a high temperature epoxy adhesive MECOM 2010 – CILAMCE 2010, 2nd South American Congress on Computational Mechanics
(Buenos Aires, Argentina)
2010 Determinação da lei coesiva em modo I de uma junta colada de compósito de carbono-epóxido pelo método dos elementos finitos extendido ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas
(Porto, Portugal)
2010 Reparação de vigas de madeira com laminados de compósito de carbono-epóxido ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas
(Porto, Portugal)
2010 Ligação adesiva de polietileno e materiais compósitos ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas
(Porto, Portugal)
2009 Reparação de vigas de madeira danificadas por esmagamento com compósitos de carbono-epóxido II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia
(Porto, Portugal)
2009 Optimização da geometria de reparações adesivas por sobreposição simples em materiais compósitos II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia
(Porto, Portugal)
2009 Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures ICCS15, 15th International Conference on Composite Structures
(Porto, Portugal)
2009 Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting
(Roma, Italy)
2009 Strength prediction of adhesively-bonded repairs on carbon-epoxy laminates by the single and double-strap techniques IRF2009, 3rd International Conference on Integrity, Reliability and Failure
(Porto, Portugal)
2009 Effect of plug filling, testing velocity and temperature on the tensile strength of single and double-strap repairs on aluminium structures IRF2009, 3rd International Conference on Integrity, Reliability and Failure
(Porto, Portugal)
2009 Determinação experimental da resistência ao corte de juntas adesivas por sobreposição simples com substratos de polietileno e polipropileno JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia
(Porto, Portugal)
2009 Determinação experimental da taxa crítica de libertação de energia em modo I de um adesivo acrílico pelo ensaio Double Cantilever Beam (DCB) JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia
(Porto, Portugal)
2009 Fracture characterization of sandwich material interfaces under mode I loading using crack equivalent concept ICCS15, 15th International Conference on Composite Structures
(Porto, Portugal)
2009 Determination of the Cohesive Law in Adhesive Bonded Joints under Pure Mode I Loading ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting
(Roma, Italy)
2008 Buckling behaviour of carbon-epoxy adhesively-bonded scarf repairs ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting
(Barcelona, Spain)
2008 Aplicação de modelos coesivos para a determinação da resistência mecânica de juntas coladas CLME’2008, 5º Congresso Luso-Moçambicano de Engenharia
(Maputo, Mozambique)
2008 Reparações em materiais compósitos CLME’2008, 5º Congresso Luso-Moçambicano de Engenharia
(Maputo, Mozambique)
2008 Repair of Composites and Sandwich Structures Advanced School on Sandwich Structures
(Porto, Portugal)
2008 Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model 8th International Conference on Sandwich Structures (ICSS 8)
(Porto, Portugal)
2008 Cohesive mixed-mode damage model applied to the simulation of the mechanical behaviour of a repaired sandwich beam 13th European Conference on Composite Materials (ECCM13)
(Estocolmo, Sweden)
2008 Mixed-Mode Cohesive Damage Model Applied to the Simulation of the Mechanical Behaviour of Laminate Composite Adhesive Joints ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting
(Barcelona, Spain)
2008 Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method PCF 2008 - 11th Portuguese Conference on Fracture
(Lisboa, Portugal)
2008 Numerical simulation of the mechanical behavior of a repaired sandwich beam using a cohesive damage model PCF 2008 - 11th Portuguese Conference on Fracture
(Lisboa, Portugal)
2008 Adhesively bonded single-lap joints between polyethylene and other materials. Numerical analysis and experimental results PCF 2008 - 11th Portuguese Conference on Fracture
(Lisboa, Portugal)
2007 Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints ACE-X 2007, International Conference on Advanced Computational Engineering and Experimenting
(Alvor, Portugal)
2006 Modeling of fibre bragg grating sensor plates III European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering
(Lisboa, Portugal)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2022 - Current Empowering autonomous free floating manipulation in underwater inspections and interventions through reinforcement learning
Co-supervisor of João Manuel Maia Dionísio
 Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2022 - Current Development of an AUV inspired by functional biology
Supervisor of Pedro Nuno de Almeida Arrojado da Silva Pereira
 Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2020 - Current Modelação numérica de ligações adesivas sob condições de carga dinâmica por métodos sem malha
Supervisor of Diogo Costa Gonçalves
 Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 - Current Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais
Supervisor of Luís Daniel Costa Ramalho
 Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 - Current Estudo experimental e numérico de juntas adesivas tubulares
Supervisor of Mónica Gloria Cardoso
 Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2022 - 2023 Estudo de juntas adesivas tubulares sujeitas a esforços de impacto
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Implementation of lockout/tagout (LOTO) methodologies on production lines
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Validação, comissionamento e otimização de linhas de enchimento
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Análise de juntas adesivas tubulares do tipo varão-tubo sujeitas a esforços de tração para aplicações estruturais
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Estudo experimental do efeito de radiação gama e x nas propriedades mecânicas de adesivos estruturais
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Modelação por elementos finitos de juntas adesivas tubulares de ressalto exterior sujeitas a esforços de tração
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Melhoria do processo de fabrico de cabos de controlo para a indústria de componentes automóveis
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Projeto de equipamento de deteção de componentes para a indústria automóvel
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Estudo da compactação de reforços no âmbito do processamento de materiais compósitos pelo processo de infusão por vácuo
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Desenvolvimento e integração de transferência ortogonal
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Simulação de processos de estampagem pelo método de elementos finitos
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Estudo e implementação de um procedimento de rastreabilidade numa empresa metalomecânica
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial (Other)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Study, modeling and numerical improvement of a server pallet
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Desenvolvimento de novo conceito de bomba de Zamak para melhoria da formação de gito devido à inclinação atual da bomba
Co-supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 - 2023 Estudo e desenvolvimento de uma nova linha de taipais para reboques multifunções
Co-supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2023 Análise do comportamento estrutural de ligações adesivas em aderentes impressos em 3D
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2023 Comparação de modelos lineares elásticos e hiperelásticos em métodos numéricos para a previsão de resistência estática de juntas adesivas
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2023 Numerical thermomechanical analysis of scarf adhesive joints
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Projeto de equipamento de assemblagem de conetores
Supervisor of Pedro Manuel Pires Curralo
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Desenvolvimento de sistemas de monitorização de montagem de componentes na indústria automóvel
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Projeto de uma solução eficiente de acionamento de uma quinadora hidráulica
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Otimização do processo industrial de uma trituração
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Ferramenta de dimensionamento de pavilhões metálicos
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Estudo de esforços em pontos de fixação de componentes poliméricos para a indústria automóvel
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Melhoria e análise do processo de fabrico de ingredientes farmacêuticos ativos
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Caracterização de estruturas compósitas auto-reparáveis para solicitações de impacto
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Projeto de melhoria de uma guilhotina hidráulica nos processos de fabrico e de montagem
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Utilização do método de elementos finitos extendido para a previsão da resistência de juntas adesivas de chanfro interior
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Estudo estático de juntas adesivas tubulares sujeitas a esforços de tração
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Estudo de um adesivo estrutural em juntas de compósito-alumínio utilizando o floating roller peel test
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Estudo comparativo de diferentes adesivos estruturais ao arrancamento pelo floating roller peel test
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Otimização da gestão de armazéns físicos e virtuais
Co-supervisor
 Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 - 2022 Estratégias de mitigação da redução de desperdício no fabrico de bowden cables
Co-supervisor
 Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2022 Estudo do efeito do material dos aderentes em juntas adesivas tubulares sujeitas a esforços de tração
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2022 Estudo experimental e numérico de juntas adesivas em degrau interior e com dois adesivos
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2022 Melhoria de produtividade de um equipamento de fabrico de cabos de comando para a indústria automóvel
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2022 Estudo da resistência de ligações adesivas usadas no fabrico de embarcações de canoagem
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2022 Aumento da vida útil das ferramentas de cravação de terminais elétricos para a indústria automóvel
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2022 Implementing improvements in the organisation and working methods in the maintenance of moulders
Co-supervisor
 Mestrado em Engenharia Mecânica (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 - 2022 Benchmarking e estabelecimento das diretrizes para o desenvolvimento de proteções de radiador alternativas para um motociclo de todo terreno
Co-supervisor
 Mestrado em Engenharia Mecânica – Ramo de Construções Mecânicas (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2022 Estudo de diferentes critérios de iniciação e propagação de dano na modelação de juntas adesivas de chanfro interior pelo método de elementos finitos extendido
Supervisor
 Mestrado em Engenharia Mecânica – Ramo de Materiais e Tecnologias de Fabrico (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2022 Desenvolvimento de novo conceito de equipamento automático para fabrico de cabos de comando para automóveis
Co-supervisor
 Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 The automation of bent wires transfer from wire bending machine to injection machine
Co-supervisor of Thibaut de Brabandere
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Melhoria da precisão de corte de tubos em espiral através na metodologia DMAIC
Co-supervisor of Diana Alexandra Martins Pereira
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Análise e melhoria de equipamentos de fabrico de componentes para a indústria automóvel
Supervisor of André Joaquim Leite Barbosa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Desenvolvimento de aplicação em soft robotics
Supervisor of Pedro José Pádua Dias Pereira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Implementação de robôs para a paletização de painéis de porta numa empresa industrial
Co-supervisor of André Filipe Silva Correia
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Projeto de sistema de armazenamento e alimentação de chapa
Supervisor of João Pedro Pinto Fernandes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Adaptação de um pórtico de soldadura para uma máquina de corte de tubo
Supervisor of André Rangel Vidal
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Otimização estrutural de uma central frigorífica a operar com CO2
Supervisor of Rúben Carlos Gonçalves Vasco
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Housing componentes for autonomous underwater vehicles - Design and structural validation via finite element analysis
Supervisor of Pedro Nuno de Almeida Arrojado da Silva Pereira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Estudo de juntas adesivas em T através de métodos numéricos
Supervisor of Ricardo Jorge Carvalho Sousa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Modelação numérica de juntas adesivas estruturais com adesivos reforçados com microfibras de vidro
Supervisor of Miguel Araújo da Rocha
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Análise experimental e numérica de estruturas sandwich compósitas
Supervisor of Miguel José Rodrigues de Queirós
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Validation of the ISSF criterion applied to bonded joints using numerical methods
Supervisor of João Manuel Maia Dionísio
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Previsão da resistência de juntas compósitas curvas com ressalto sujeitas a pressão interior
Supervisor of Pedro Agostinho da Rocha Ferreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Resistência mecânica e de fratura de juntas adesivas reforçadas com microfibras de vidro
Supervisor of João Neto Marcos
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Redução do gito e melhoria do processo de injeção em máquinas de injeção de Zamak
Supervisor of José Luís Torres Alves Pereira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Projeto e dimensionamento de uma máquina de soldadura com alimentação de fio automático
Supervisor of Diogo Oliveira Tavares
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Desenvolvimento de um sistema de rotação e elevação para mesas rotativas de paletes
Supervisor of Jorge Manuel Moreira Vieira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Estudo experimental e numérico de juntas T adesivas pela técnica bi-adhesive
Supervisor of Pedro Miguel Dias Carvalho
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Projeto de um reservatório criogénico de tipo V para a indústria aeroespacial
Supervisor of Rui Jorge Carvalho Fernandes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Efeito dos parâmetros coesivos na resistência ao impacto de juntas adesivas compósitas de sobreposição dupla
Supervisor of Luís André Rodrigues Gomes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Estudo analítico de juntas adesivas tubulares sujeitas a esforços de tração
Supervisor of André Eduardo da Silva Pinheiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Estudo e otimização do processo de estampagem a quente de materiais compósitos de matriz termoplástica reforçados com fibra contínua
Supervisor of Rúben Filipe Dias Cardoso
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Projeto mecânico de uma empacotadora de atados de tubos
Supervisor of Ana Raquel Pereira Rocha
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Estudo e validação de um processo de fabrico de materiais compósitos
Supervisor of Diogo Fernando Assunção Bento
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Projeto e modelação numérica de equipamento para ensaios mixed-mode bending (MMB) de adesivos estruturais
Supervisor of Alice Raquel Ferreira Soares
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Avaliação experimental e numérica de estruturas sandwich compósitas
Supervisor of Hélder Guilherme do Eirado da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Reengenharia de uma célula robotizada
Co-supervisor of João Pedro Fernandes Pereira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Criação de aplicação informática para gestão da rede elétrica de empresa industrial
Co-supervisor of Renato Rodrigues Moreira
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2021 Avaliação do aumento da vida útil de uma ferramenta utilizada numa empresa de motores elétricos através da filosofia six sigma
Co-supervisor of Catarina Peixoto Neves
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2021 Projeto de equipamento de dobragem tridimensional de arame
Supervisor of Luciano Miguel Coelho Barbosa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2021 Automatização do processo produtivo de cabos de comando para automóveis
Co-supervisor of Luís Miguel Brito Coelho
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2021 Caracterização de um adesivo estrutural reforçado com microfibras de vidro
Supervisor of Guilherme Sá Moreira Tavares
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2021 Estudo do ensaio CLS para determinação da tenacidade em modo misto de juntas adesivas
Supervisor of Ricardo Bruno Pereira Barros
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2021 Estudo paramétrico numérico de juntas tubulares com chanfro sujeitas a esforços de tração
Supervisor of José Eduardo Santos Maia da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2021 Otimização da utilização de matérias-primas numa indústria de produtos abrasivos
Co-supervisor of Joana Neves Pereira
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Experimental determination of the mechanical properties of adhesive joints bonded by an epoxy adhesive including cork particles
Supervisor of Aleksandra Gorczyca
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Application and improvement/fine-tuning of a hybrid PM planning method to a real project
Co-supervisor of Francisco Cerqueira Saraiva
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Alteração do sistema de corte de recuperadora do breaker
Co-supervisor of Tiago João Ferreira da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Development of automatic manipulators for plastic injection machines
Co-supervisor of Robin Penne
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Estudo numérico de juntas adesivas em T com substratos de alumínio
Supervisor of João Pedro Moura Lopes
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Uso de métodos sem malha para a previsão de resistência de juntas adesivas
Supervisor of Rúben Filipe Pinho Resende
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Utilização do integral-J para medição da tenacidade à fratura de adesivos estruturais em modo misto
Supervisor of Luís Filipe Ribeiro Neves
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Determinação das propriedades mecânicas e de fratura de um adesivo epóxido dúctil
Supervisor of João Edgar da Cunha Pinto
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Projeto de equipamento de movimentação de camas hospitalares
Supervisor of Nuno Miguel Senra Faria
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Estudo de juntas adesivas tubulares sujeitas a esforços combinados de tração e pressão interior
Supervisor of Daniel Augusto Lopes Ribeiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Estudo de um adesivo estrutural em juntas de compósito-alumínio utilizando o floating Roller peel test
Supervisor of João Pedro Oliveira Pereira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Projeto de uma máquina de corte duplo de espiral com limpeza
Supervisor of André Filipe Gomes Barbosa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Projeto mecânico de um sistema transfer
Supervisor of Daniel Marques Nunes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Projeto de um equipamento enterrado de recolha de resíduos sólidos urbanos
Supervisor of Jorge Duarte Carvalho da Costa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Projeto, análise numérica e experimental do comportamento estrutural de sistema rotativo para bancos de veículos automóveis da categoria M1
Supervisor of José Manuel Pereira de Oliveira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Análise térmica de perfis em aço protegidos e não protegidos sob ação do fogo
Co-supervisor of Pedro Nuno da Costa Oliveira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Reestruturação da manutenção preventiva e execução de ações de melhorias nas máquinas de injeção de plástico em indústria de componentes para automóvel
Co-supervisor of João Paulo Garcia de Souza
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2020 Projeto de um sistema de fixação para cadeiras porta-bebés de bicicleta
Co-supervisor of Samuel Santos Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Análise CFD e otimização do processo de produção de componente na indústria automóvel
Co-supervisor of André Filipe Almeida Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Análise do efeito de filetes de adesivo na resistência estática de juntas adesivas tubulares
Supervisor of Tiago Abel Pereira de Almeida
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Análise experimental e numérica de juntas adesivas de sobreposição simples e dupla solicitadas ao impacto
Supervisor of Luís Miguel Cardoso Peres
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Uso de alterações geométricas em juntas adesivas tubulares para melhoria da resistência ao impacto
Supervisor of Amaro Filipe Marques Vieira da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Estudo numérico da fratura em modo misto de juntas adesivas pelo ensaio single-leg bending
Supervisor of Armando Filipe Lopes Macedo
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Caracterização das propriedades mecânicas e de tenacidade à fratura do SMC
Supervisor of Pedro Miguel Moreira da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Estudo experimental e numérico da adesão de prepregs com diferentes substratos
Supervisor of Adriano Gomes Rodrigues
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Estudo numérico do efeito da espessura do adesivo na tenacidade à tração de juntas adesivas
Supervisor of Rui Pedro Rebelo Oliveira Antunes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Caracterização das propriedades mecânicas de um adesivo estrutural modificado com pó de cortiça expandida
Supervisor of Pedro Jorge de Jesus Monteiro
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Caracterização numérica das propriedades mecânicas de um adesivo estrutural reforçado com partículas de cortiça expandida
Supervisor of Miguel Ângelo Pinheiro Figueiras
 Mechanical Engineering - Energy (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Projeto de equipamento flexível para remoção de bobinas de corda de uma bobinadeira
Co-supervisor of Rui Pedro Carvalho Soares
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Desenvolvimento de novo conceito de subconjunto de injeção de Zamak e melhoria das condições de desgaste para dispositivo de corte de cabo no setor automóvel
Co-supervisor of Mechanical Engineering - Materials and Manufacturing Technologies
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2020 Desenvolvimento de um módulo veicular capaz de se movimentar a 360º e 90º
Co-supervisor of Cláudia Daniela Alves Ferreira
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2020 Modelação numérica de juntas adesivas sujeitas ao impacto por modelos de dano coesivo
Supervisor of Manuel Fernandes Torres Dias Arnaud
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2020 Estudo de alterações geométricas para melhoria de resistência de juntas adesivas tubulares
Supervisor of Marcelo Fernandes Macedo Oliveira Rosas
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2020 Modelação numérica do comportamento à flexão de estruturas sandwich pelo Método de Elementos Finitos
Supervisor of Pedro Daniel da Silva Macedo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2020 Projeto de microinjetora de termoplásticos para a indústria automóvel
Supervisor of Alexandre Luís Nunes Vieira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2020 Desenvolvimento de uma ferramenta informática em Matlab para análise de estruturas pelo Método de Elementos Finitos
Supervisor of José Ramos da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Gestão e análise de criticidade do processo de embutição de tubo na indústria automóvel
Co-supervisor of Ana Margarida da Costa Vieira
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Sustentabilidade automobilística: comparação entre sistemas de acionamentos dos automóveis atuais utilizando o método AHP
Co-supervisor of Liniker Lima de Araújo Corcetti
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Analysis of the most suitable project management approach for projects with parallel planning and execution phases
Co-supervisor of Fábio André Veloso Freitas
 Mechanical Engineering - Energy (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Design of a concept thermoplastic instrument panel for a powered two-wheeler
Supervisor of Rui Filipe Rente Costa
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Estudo de processo de fabrico avançado para estruturas aeronáuticas compósitas
Supervisor of João Pedro Ferreira da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Solução automática para movimentação de cassetes em máquinas de construção de pneus
Supervisor of Luís Tiago Silva Carvalho
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Using fully automated solutions in the inspection and packaging of complex automotive components
Co-supervisor of Georges-Junior Swertvaegher
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Melhoria do processo de planeamento de projetos de um departamento de gestão de redes
Supervisor of Pedro Joaquim de Sousa Lopes
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Dimensionamento de uma estrutura metálica para suporte de um trans-rupter
Supervisor of João Pedro Lopes Fernandes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Implementação de um plano de manutenção numa linha de processamento de cortiça
Supervisor of André Bessa Lagos
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Modelação numérica de juntas stiffener em T por modelos de dano coesivo
Supervisor of Joaquim Alberto Monteiro Ferreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Resistência à tração de juntas compósitas em degrau: análise experimental e numérica por modelos de dano coesivo
Supervisor of Rui Filipe Nogueira Brito
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Projeto de célula robotizada para a indústria automóvel
Supervisor of Joaquim António Pinto Pereira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Gestão de projeto e produção de uma ponte ferroviária em estrutura metálica
Supervisor of Rafael Tiago Ferraz de Azevedo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Utilização de métodos de discretização avançada para a previsão da resistência estática de juntas adesivas
Supervisor of Daniel Madureira Cardoso
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Gestão de projeto e dimensionamento de um pavilhão industrial
Supervisor of Miguel Ângelo Santos Castro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Desenvolvimento de novo conceito de equipamento flexível para o fabrico de cabos de comando para automóveis
Co-supervisor of Nuno Gonçalo Oliveira Martins
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Análise do modo de falha e dos seus efeitos ao longo da linha de aglomeração cork rubber 1
Co-supervisor of Íris Ferreira e Ferreira
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2019 Desenvolvimento de um novo conceito de equipamento flexível para a indústria automóvel
Co-supervisor of Luís Manuel Neto Afonso
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 Processo de industrialização numa empresa do setor automóvel
Co-supervisor of Ângelo Francisco Coutinho Tadeu
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 Eliminação de manipulações entre operações numa empresa da indústria automóvel
Co-supervisor of Francisco António Pires Neto
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 Otimização de embalagem metálica para transporte de produtos perigosos
Co-supervisor of Teresa Raquel Barros Barbosa
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 Análise numérica de juntas adesivas tubulares sujeitas a um carregamento de torção
Supervisor of Tiago José de Sousa Oliveira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 J-integral analysis of the mixed-mode fracture behaviour of composite bonded joints
Supervisor of Fernando José Carmona Freire de Bastos Loureiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 Simulação e validação do comportamento de juntas adesivas tubulares
Supervisor of Daniel Rodrigues Barbosa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2019 Otimização do processo de obtenção e tratamento de dados de clientes telecontados
Supervisor of Daniel Moreira Gonçalves
 Mechanical Engineering - Energy (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2018 Utilização do método de elementos finitos extendido para a previsão de resistência de juntas híbridas em T
Supervisor of Rogério Valentim Ferreira Faria
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Continuous improvement of a machining process by designing a new jig
Supervisor of Sampath Kumar Senthil Kumar
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo numérico e experimental da adesão de SMC e prepreg
Supervisor of Vitor Hugo Pinto Lopes
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Evaluation of the extended finite element method for the analysis of bonded joints
Supervisor of Vignesh Ramesh
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo de juntas adesivas em degrau: Análise experimental e numérica por Modelos de Dano Coesivo
Supervisor of Diogo José da Costa Gonçalves
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Influência dos parâmetros e critérios dos modelos de dano coesivo na previsão da resistência ao impacto de juntas adesivas
Supervisor
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo numérico de juntas adesivas mistas solicitadas ao impacto
Supervisor of Luís António Salgueiro Maia
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo de juntas adesivas tubulares com defeito: análise experimental e numerica por modelos de dano coesivo
Supervisor of Tiago Patrício Vieira da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Melhoria de eficiência de uma linha de montagem de aerossóis
Supervisor of Diogo Manuel Marques Meleiro
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Optimizing the work environment using lean and continuous improvement tools-printing floor
Supervisor of Manivannan Sampath
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo numérico de juntas adesivas tubulares de sobreposição simples pelo Método de Elementos Finitos eXtendido
Supervisor of Serjio Manuel Lopes Eusébio
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo experimental e numérico de juntas adesivas em degrau com dois adesivos
Supervisor of Celso Lopes Ferreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo paramétrico de juntas adesivas curvadas em material compósito
Supervisor of João Manuel Carvalho Correia
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Estudo dos mecanismos de geração de degrau nas emendas do breaker no processo de corte metálico
Supervisor of João Claudio Maia de Sousa
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Projeto de equipamento para montagem automática de componentes para a indústria automóvel
Supervisor of Nuno Filipe Moreira Veiga
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Obtenção das leis coesivas em modo misto de adesivos estruturais em função da espessura do adesivo
Supervisor of Joel Jorge Gomes de Oliveira
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Influência dos parâmetros coesivos em juntas de sobreposição simples solicitadas ao impacto
Supervisor of Duarte Miguel de Sousa Ribeiro Batalha Machado
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Reduction of scrap percentage of cast parts by optimizing the process parameters
Supervisor of Rakesh Chandrasekaran
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Design e desenvolvimento de uma solução modular de um veículo autónomo para transporte e manuseamento de cargas, baseado numa plataforma existente
Supervisor of Henrique Daniel Barbosa Carvalho Leal de Oliveira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Specification and design of a measuring system for spring systems in cold form tooling
Supervisor of António Manuel Costa Luís Cardoso Encerrabodes
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Otimização na manufatura aditiva
Co-supervisor of Wesley Fernandes Camelo
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Bus manufacturing: line balancing and optimization
Co-supervisor of Saravana Kumar Thirumal
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Projeto de equipamento para chanfro de geometrias irregulares
Co-supervisor of Jorge Manuel Fragoeiro Carboila
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Create cost effective post processing techniques for multiple measured and simulated scenarios
Co-supervisor of Luís António Salvador Martins
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Organização de layout e aplicação da metodologia 5s em empresa metalomecânica
Co-supervisor of Giuliana Karoline Bragança Pavão
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Otimização de uma zona de preparação para uma linha de montagem
Co-supervisor of Rúben Miguel Paiva Lopes
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Study on feasibility and viability of applying eco-friendly material for the “be”-car bonnet for a sustainable automotive part
Co-supervisor of Dilipkumar Selvaraj
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Optimization of the wing-fuselage interface of UAS30-P2
Co-supervisor of Tholkappiyan Deenadayalan
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Influência da tensão de corda na produção de componente e otimização do processo de fabrico
Co-supervisor of Carlos Diogo Martins Costa
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Análise e revisão de planos de manutenção na Cerealis - suporte ao projeto de gestão de spare parts
Co-supervisor of Filipe Rui da Costa Moia Pereira Cernadas
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Contentor térmico redondo para transporte de asfalto
Co-supervisor of Paulo Vinicius Borges Lopes
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Desenvolvimento do projeto de uma máquina de preparação de tubo espiral
Co-supervisor of Paulo Ricardo Oliveira dos Santos
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Integração e melhoria de processos na vulcanização de pneus
Co-supervisor of Ana Margarida Dias Torres Ferreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2018 Análise e melhoria de uma linha de produção na indústria automóvel
Co-supervisor of Paulo César Machado Dias
 Mechanical Engineering - Industrial Management (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2018 Estudo de juntas adesivas em degrau: Análise experimental e numérica por Modelos de Dano Coesivo
Supervisor of João Osvaldo Sousa e Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2018 Análise numérica de corte e estampagem em punçonadora
Supervisor of Bruno Gabriel Pinheiro Moreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2018 Projeto de melhoria de equipamento para a produção de cabos de comando para veículos
Co-supervisor of José Pedro Maia Junqueiro Vilas
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Projeto de sistema de manipulação de arames
Co-supervisor of António José Alves de Magalhães
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Projeto-piloto de um gaseificador de pequena escala para resíduos sólidos
Co-supervisor of Tiago Manuel Branco Pedrosa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Melhoria do sistema de movimentação do transportador de cunha e posicionamento do tabuleiro de aplicação apex
Co-supervisor of Rui Filipe Lima Santos
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Mitigação das causas geradoras de defeitos em peças metálicas injetadas de caráter estético
Co-supervisor of Diana Catarina Capela Ferreira
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Projeto e implementação de um sistema corta gito em uma máquina de injeção de zamak
Co-supervisor of Gabriella Halicki Safraiter
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Desenvolvimento do projeto mecânico de uma máquina alimentadora de barras para centros de torneamento
Co-supervisor of Gabriel Berton Pereira da Silva
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Validação do Método dos Elementos Finitos Extendido (MEFX) para a previsão do comportamento de juntas adesivas em T
Supervisor of Filipe José Pinho Moreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Validação de envelopes de fratura de adesivos obtidos em ensaios de fratura em modo misto para a previsão de resistência de juntas de modo misto
Supervisor of José Pedro Silva Moreira Barros Ribeiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Determinação da tenacidade à fratura de adesivos estruturais pelo método Asymmetric Tapered Double-Cantilever Beam (ATDCB)
Supervisor of Filipe André Almeida Nunes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Comparação experimental e numérica por modelos de dano coesivo de diversos tipos de juntas adesivas
Supervisor of Nélson Gustavo da Costa Barbosa
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Strength prediction of adhesively-bonded joints by advanced discretization techniques (NNRPIM)
Supervisor of Bruno Filipe Pinho Resende
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Previsão de resistência de juntas adesivas utilizando leis coesivas obtidas pelo método inverso
Supervisor of Filipe André Lourenço Viana
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Estudo paramétrico numérico de juntas adesivas tubulares sujeitas a esforços de tração
Supervisor of Luís Rafael Faria Ferreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Desenvolvimento de um braço de suspensão de um automóvel eléctrico em material compósito
Supervisor of Paulo Jorge Aguiar Gonçalves
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Dimensionamento de pavilhões metálicos em soluções treliçadas
Supervisor of Carlos Miguel Vieira Teixeira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Otimização numérica de moldes para injeção de peças plásticas
Supervisor of Rui Casa Nova Barbosa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Otimização numérica de juntas adesivas sujeitas a impacto
Supervisor of João Pedro Afonso Valente
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Obtenção das leis coesivas em corte de adesivos estruturais em função da espessura do adesivo
Supervisor of João Carlos Pereira Figueiredo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Utilização do método direto de obtenção de leis coesivas para previsão de resistência de juntas com chanfro interior
Supervisor of Daniel Filipe Oliveira da Silva
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Projeto de um elevador automatizado para transporte de limalha
Supervisor of Tiago Filipe Santos Ribeiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Fivela "alarm-free": estudo e projeto de uma fivela indetetável nos equipamentos de deteção de metais presentes nos aeroportos
Co-supervisor of Fábio Manuel Gonçalves Teixeira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Paletizador automático para gravação laser de componentes de veiculos automóvel
Co-supervisor of Miguel António Fernandes Pereira Teixeira de Brito
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2017 Design e otimização de peças estruturais metálicas para processos de fabricação aditiva
Co-supervisor of José Armando Arantes Carreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2017 Análise numérica de juntas adesivas em degrau pelo Método de Elementos Finitos Extendido
Supervisor of Rui Manuel Dias Machado
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2017 Development of a cohesive zone model for adhesive joints that includes humidity and fatigue degradation
Co-supervisor of Marcelo Bruno Serrão Fontes Parente da Costa
 Mechanical Engineering (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2015 - 2016 Comparação de técnicas analíticas e numéricas para previsão da resistência de juntas adesivas de sobreposição simples
Supervisor of Carla Cristina Ramos Guimarães de Sousa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Modelação de juntas adesivas por modelos de dano coesivo utilizando o método direto
Supervisor of Ulisses Tiago Ferreira Carvalho
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Estudo experimental e numérico de juntas adesivas em T com aderentes de alumínio
Supervisor of Miguel Angel da Silva Carneiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Validação numérica dos ensaios DCB e ENF para determinação da tenacidade à fratura de juntas adesivas
Supervisor of Rui Valdemar Correia de Araújo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Aplicação do Método dos Elementos Finitos Extendido (MEFX) para a previsão de resistência de juntas adesivas de sobreposição dupla
Supervisor of Telmo Ferreira Santos
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Projeto de uma ferramenta específica para cravação de terminais elétricos
Co-supervisor of Tiago André Moura de Castro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Previsão da resistência de juntas adesivas em L entre alumínio e material compósito pelo Método de Elementos Finitos Extendido (MEFX)
Supervisor of João Tiago Silva Xará
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Evaluation of different damage initiation and growth criteria in the cohesive zone modelling analysis of single-lap bonded joints
Supervisor of Ricardo Jorge Braga da Rocha
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Estudo numérico da fratura em modo misto de juntas adesivas pelo ensaio single-leg bending
Supervisor of Manuel António da Silva Santos
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Modelação numérica dos ensaios DCB e TDCB para determinação da tenacidade em tração de adesivos estruturais
Supervisor of João Miguel Dias Teixeira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Avaliação numérica dos ensaios ENF e 4ENF para a determinação da taxa crítica de libertação de energia ao corte (GIIC) de adesivos estruturais
Supervisor of Alberto Jorge da Silva Leal
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Ligações adesivas com chanfro interior entre aderentes distintos
Supervisor of David Leal Alves
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Projeto de equipamento flexível para montagem de conjuntos para limpa para-brisas de automóvel
Co-supervisor of Ricardo Jorge Soares da Costa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Sistema inovador de transferência de paletes
Co-supervisor of Fábio Rúben Carvalho Pimenta
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Antecipação de problemas e redução de custos na estampagem de aços dual-phase de altíssima resistência
Co-supervisor of Tiago Dias Gomes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Projeto de molde sandwich para a injeção de duas peças para a indústria automóvel
Co-supervisor of Vitor Abel Marques Pais
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2016 Análise e otimização de máquinas para o fabrico de espiral metálica para cabos
Co-supervisor of João Mário Monteiro Quadrado
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2016 Comparação dos métodos ENF e 4ENF para determinação da tenacidade ao corte de juntas adesivas
Supervisor of Bruno Miguel Almeida de Oliveira
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2016 Projecto e implementação de sistema de alimentação automática para forno de apoio à injecção de zamak
Co-supervisor of Tiago Alexandre Raposo Bompastor
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Estudo da resistência e modo de rotura de juntas adesivas em L entre alumínio e material compósito
Supervisor of Nuno Ricardo Esteves Domingues
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Determinação da tenacidade à fratura de adesivos estruturais em modo misto pelo ensaio Single-Leg Bending
Supervisor of António Pedro Oliveira Amorim Leite Soares
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Estudo comparativo da resistência à tração de juntas adesivas de sobreposição simples e dupla
Supervisor of Sara Liliana Silva Nunes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Optimização do processo de maquinagem de componentes para a indústria automóvel
Co-supervisor of João Pedro Rodrigues Ala de Matos
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Caraterização das propriedades mecânicas de um adesivo estrutural de alta ductilidade
Supervisor of João Pedro Ramos Monteiro
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Estudo numérico da adequação de diferentes tipos de leis coesivas na previsão da resistência de juntas adesivas por Modelos de Dano Coesivo
Supervisor of Ricardo Lourenço Fernandes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Aplicação de um método de correlação de imagem para a determinação da tenacidade à fratura em corte de adesivos estruturais
Supervisor of Ana Catarina Carneiro Leitão
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Resistência e modo de rotura de juntas adesivas de estruturas mistas de alumínio e material compósito
Supervisor of Tiago Emanuel Andrade Ribeiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão
Supervisor of Filipe Manuel Ferreira Ribeiro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 - 2015 Projeto mecânico de máquina de acionamento pneumático para fabrico automatizado de vestuário
Supervisor of Pedro Miguel Machado dos Santos
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2015 Estudo e otimização de juntas do tipo T-peel adesivas, soldadas e híbridas
Supervisor of Fernando Jorge da Silva de Almeida
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2015 Criação de programa informático em ambiente Matlab® para estudo de estruturas planas pelo Método de Elementos Finitos
Supervisor of Pedro Palmeira Lázaro
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2015 Estudo de problemas de corrosão em cabos de aço zincado
Co-supervisor of Felismino de Brito Viana
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Aplicação de métodos numéricos avançados para a previsão de resistência de ligações adesivas
Supervisor of Tiago Adelino Brandão Fernandes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Projecto de molde para peça para a indústria automóvel
Co-supervisor of Miguel dos Santos Maia
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Análise da integridade estrutural de uma flare industrial
Supervisor of Ricardo Jorge Oliveira Jesus Soares
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Criação de programa informático em ambiente Matlab® para estudo de estruturas reticuladas tridimensionais pelo Método de Elementos Finitos
Supervisor of Sandro Neves Campos
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Influência do tipo de adesivo em juntas híbridas soldadas-adesivas
Supervisor of Gustavo Pereira Marques
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Caraterização das propriedades mecânicas de um adesivo estrutural de alta ductilidade
Supervisor of Tiago Manuel dos Santos Faneco
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Comparação dos ensaios DCB e TDCB para determinação da tenacidade em tração de adesivos estruturais
Supervisor of Ricardo Mendonça Lopes
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Determinação da tenacidade à fractura em corte (GIIC) de adesivos estruturais pelo ensaio End-Notched Flexure (ENF)
Supervisor of João Carlos Silva Azevedo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Projecto de sistema de fixação de punções para quinadoras hidráulicas
Co-supervisor of André Manuel Correia Ferreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Desenvolvimento de sistema de apoio dinâmico da chapa no corte em guilhotina
Co-supervisor of Luís Manuel Barbosa de Araújo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Optimização de processo semi-automático de fabrico de componentes para automóveis
Co-supervisor of Walter Fernando da Silva Araújo
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2014 Optimização do processo de fabrico de componentes para a indústria automóvel
Co-supervisor of Mário Jorge Rei Martins Jesus Costa
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013 - 2013 Effect of the adhesive thickness on the strength of single lap joints with composites
Co-supervisor of Alexandre Nuno Serra Nascimento
 Mechanical Engineering (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2013 - 2013 Development of a web application for the design of adhesive joints
Co-supervisor of Marcelo Bruno Serrão Fontes Parente da Costa
 Mechanical Engineering (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2012 - 2013 Estudo de reparações adesivas pela técnica de remendo embebido com reforços exteriores para aumento da resistência
Supervisor of Raul Domingos Ferreira Moreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 - 2013 Ligação adesiva de polímeros particularmente difíceis de colar
Co-supervisor of Jorge Ribeiro Martins
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 - 2013 Determinação das propriedades mecânicas à tração de adesivos estruturais frágeis e dúcteis
Supervisor of Sérgio Daniel Moreira Pinto
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 - 2013 Desenvolvimento de ferramentas e provetes para o ensaio Thick Adherend Shear Test (TAST)
Co-supervisor of João Francisco Alves Morais
 Mechanical Engineering - Materials and Manufacturing Technologies (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 - 2013 Projeto da estrutura e sistema de movimentação robotizado de linha automática de corte de chapa
Supervisor of Hélder Tiago Costa Moreira
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 - 2013 Projeto de equipamento de rotação de moldes de grande porte com recurso ao Método de Elementos Finitos
Supervisor of João Carlos Almeida Gomes
 Mechanical Engineering - Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2011 - 2012 Desenvolvimento de uma ferramenta para cálculo de estruturas em material compósito
Co-supervisor of Frederico Marcos Topa e Ferreira
 Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2011 - 2012 Estudo de reparações adesivas pela técnica de remendo embebido
Co-supervisor of João Pedro Martins da Silva
 Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2011 - 2012 Efeito de alterações geométricas na resistência de juntas de sobreposição
Supervisor of Nuno Fernando Queiroz Reis Ribeiro
 Mechanical Constructions (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2011 - 2011 Estudo paramétrico de juntas adesivas em material compósito
Co-supervisor of José Alexandre Pais Neto
 Mechanical Engineering (Master)
Universidade do Porto Faculdade de Engenharia, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2024/11/19 - 2024/11/21 Member of the organization (Co-Chair) of the international conference MAEM2024, The 3rd International Conference on Mechanical Automation and Engineering Materials (2024)
Conference (Co-organisor)
2024/11/04 - 2024/11/06 Member of the organization of the international conference ISMEMP2024, International Summit on Metallurgical Engineering and Mineral Processing (2024)
Conference (Member of the Organising Committee)
2024/09/23 - 2024/09/25 Member of the organization of the international conference EUROIME2024, International Congress and Expo on Industrial & Manufacturing Engineering (2024)
Conference (Member of the Organising Committee)
2024/09/23 - 2024/09/25 Member of the organization of the international conference APPLIED2024, 2nd Global Meet on Applied Science, Engineering and Technology (2024)
Conference (Member of the Organising Committee)
2024/09/21 - 2024/09/22 Member of the organization (Co-Chair) of the international conference MME2024, 2nd International Symposium on Frontiers of Mechanical and Material Engineering (2024)
Conference (Co-organisor)
2024/08/26 - 2024/08/28 Member of the organization of the international conference GRCASET2024, Global Research Conference on Applied Science, Engineering and Technology (2024)
Conference (Member of the Organising Committee)
2024/08/22 - 2024/08/24 Member of the organization of the international conference Materials-2024, International Conference on Materials Science & Engineering (2024)
Conference (Member of the Organising Committee)
2024/07/15 - 2024/07/17 Member of the organization of the international conference GSIME2024, Global Summit on Industrial and Manufacturing Engineering (2024)
Conference (Member of the Organising Committee)
2024/06/27 - 2024/06/29 Member of the organization of the international conference Materials2024, Global Conference on Materials Science and Engineering (2024)
Conference (Member of the Organising Committee)
2024/06/17 - 2024/06/19 Member of the organization of the international conference ROBOTFORUM2024, 2nd International Forum on Artificial Intelligence and Robotics (2024)
Conference (Member of the Organising Committee)
2024/03/18 - 2024/03/20 Member of the organization of the international conference GSPEE2024, 3rd Global Summit on Power and Energy Engineering (2024)
Conference (Member of the Organising Committee)
2024/03/04 - 2024/03/06 Member of the organization of the international conference 2DMATFORUM2024, International Forum on 2D Materials and Graphene (2024)
Conference (Member of the Organising Committee)
2023/12/28 - 2023/12/29 Member of the organization (Program Co-Chair) of the international conference AMDS2023, International Conference on Applied Mathematics and Digital Simulation (2023)
Conference (Co-organisor)
2023/12/09 - 2023/12/11 President of the organization of the international conference 15IICLEAS, 15th International Istanbul Scientific Research Congress on Life, Engineering, and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/11/25 - 2023/11/27 President of the organization of the international conference 11ICLEAS, 11th International Congress on Life, Engineering, and Applied Sciences in a Changing World (2023)
Conference (President of the Organising Committee)
2023/11/25 - 2023/11/27 President of the scientific committee of the international conference 11ICLEAS, 11th International Congress on Life, Engineering, and Applied Sciences in a Changing World (2023)
Conference (Other)
2023/11/18 - 2023/11/20 Member of the organization (Technical Program Chair) of the international conference AAIA 2023, International Conference on Advances in Artificial Intelligence and Applications (2023)
Conference (Other)
2023/11/11 - 2023/11/13 President of the organization of the international conference 5IAchCLEAS, 5th International Acharaka Congress on Life, Engineering, and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/10/23 - 2023/10/25 Member of the organization of the international conference PSCM2023, Global Meet on Polymer Science and Composite Materials (2023)
Conference (Member of the Organising Committee)
2023/10/14 - 2023/10/16 Member of the organization of the international conference 2IICLEAS, 2nd International Izmir Conference on Life, Engineering, and Applied Sciences (2023)
Conference (Member of the Organising Committee)
2023/10/10 - 2023/10/12 Member of the organization of the international conference ISIME2023, International Summit on Industrial and Manufacturing Engineering (2023)
Conference (Member of the Organising Committee)
2023/09/25 - 2023/09/26 Member of the organization of the international conference 3ICASE, 3rd International Conference on Applied Science and Engineering (2023)
Conference (Member of the Organising Committee)
2023/09/23 - 2023/09/24 Member of the organization (Co-Chair) of the international conference ICMEBM2023, International Conference on Mechatronics Engineering and Building Modeling (2023)
Conference (Co-organisor)
2023/08/26 - 2023/08/28 President of the organization of the international conference 14IISRCLEAS, 14th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/08/26 - 2023/08/28 Member of the organization (Publicity Chair) of the international conference AMMSA2023, 3rd International Conference on Applied Mathematics, Modelling and Statistics Application (2023)
Conference (Other)
2023/08/12 - 2023/08/14 President of the organization of the international conference 10ICLEAS, 10th International Congress on Life, Engineering, and Applied Sciences in a Changing World (2023)
Conference (President of the Organising Committee)
2023/08/12 - 2023/08/14 President of the scientific committee of the international conference 10ICLEAS, 10th International Congress on Life, Engineering, and Applied Sciences in a Changing World (2023)
Conference (Other)
2023/07/22 - 2023/07/23 Member of the organization of the international conference CMME2023, International Conference on Computational and Mathematical Methods in Engineering (2023)
Conference (Member of the Organising Committee)
2023/07/15 - 2023/07/18 President of the organization of the international conference 4IAchCLEAS, 4th International Acharaka Life, Social, and Health Sciences Congress (2023)
Conference (President of the Organising Committee)
2023/06/18 - 2023/06/22 Member of the organization (Local Organizing Committee) of the international conference FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing (2023)
Conference (Member of the Organising Committee)
2023/06/18 - 2023/06/22 President of the scientific committee (Scientific Chair) of the international conference FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing (2023)
Conference (Other)
2023/06/18 - 2023/06/22 President of the scientific program (Program Chair) of the international conference FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing (2023)
Conference (Other)
2023/06/18 - 2023/06/22 Conference Manager of the international conference FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing (2023)
Conference (Other)
2023/06/03 - 2023/06/06 President of the scientific committee of the international conference 4IACLEAS, 4th International Artemis Congress on Life, Engineering, and Applied Sciences (2023)
Conference (Other)
2023/05/24 - 2023/05/26 Member of the organization of the international conference GECMSE2023, 3rd Global Experts Conference on Materials Science and Engineering (2023)
Conference (Member of the Organising Committee)
2023/05/20 - 2023/05/23 President of the organization of the international conference 9IBCLEAS, 9th International Baskent Congress on Life, Engineering, and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/05/20 - 2023/05/23 President of the scientific committee of the international conference 9IBCLEAS, 9th International Baskent Congress on Life, Engineering, and Applied Sciences (2023)
Conference (Other)
2023/04/29 - 2023/04/30 President of the organization of the international conference 13IISRC, 13th International Istanbul Scientific Research Congress on Life, Engineering, and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/04/08 - 2023/04/10 President of the organization of the international conference 9ICLEAS, 9th International Congress on Life, Engineering, and Applied Sciences in a Changing World (2023)
Conference (President of the Organising Committee)
2023/04/08 - 2023/04/10 President of the scientific committee of the international conference 9ICLEAS, 9th International Congress on Life, Engineering, and Applied Sciences in a Changing World (2023)
Conference (Other)
2023/03/25 - 2023/03/27 President of the scientific committee of the international conference 3IArtCLEAS, 3rd International Artemis Congress on Life, Engineering, and Applied Sciences (2023)
Conference (Other)
2023/02/18 - 2023/02/20 President of the organization of the international conference 7INYARC, 7th International New York Academic Research Congress on Life, Engineering, and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/02/04 - 2023/02/06 President of the organization of the international conference 8IBCPEAS, 8th International Baskent Congress on Physical, Engineering and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/02/04 - 2023/02/06 President of the scientific committee of the international conference 8IBCPEAS, 8th International Baskent Congress on Physical, Engineering and Applied Sciences (2023)
Conference (Other)
2023/01/21 - 2023/01/23 President of the organization of the international conference 12IISRC, 12th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences (2023)
Conference (President of the Organising Committee)
2023/01/21 - 2023/01/23 President of the scientific committee of the international conference 12IISRC, 12th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences (2023)
Conference (Other)
2023/01/07 - 2023/01/09 President of the organization of the international conference 8ICLSHSCW, 8th International Congress on Life, Social, and Health Sciences in a Changing World (2023)
Conference (President of the Organising Committee)
2023/01/07 - 2023/01/09 President of the scientific committee of the international conference 8ICLSHSCW, 8th International Congress on Life, Social, and Health Sciences in a Changing World (2023)
Conference (Other)
2022/12/17 - 2022/12/19 President of the organization of the international conference 2IACLSHSS, 2nd International Artemis Congress on Life, Social, Health, and Sports Sciences (2022)
Conference (President of the Organising Committee)
2022/12/17 - 2022/12/19 President of the scientific committee of the international conference 2IACLSHSS, 2nd International Artemis Congress on Life, Social, Health, and Sports Sciences (2022)
Conference (Other)
2022/11/26 - 2022/11/28 President of the organization of the international conference 3IACLSHSS, 3rd International Azerbaijan Academic Research Congress on Life, Social, and Health Sciences, Baku (Azerbaijão) and Virtual Conference, 26-28 Novembro de 2022. (2022)
Conference (President of the Organising Committee)
2022/11/26 - 2022/11/28 President of the scientific committee of the international conference 3IACLSHSS, 3rd International Azerbaijan Academic Research Congress on Life, Social, and Health Sciences, Baku (Azerbaijão) and Virtual Conference, 26-28 Novembro de 2022. (2022)
Conference (Other)
2022/11/26 - 2022/11/27 Member of the organization (Program Co-Chair) of the international conference AMDS 2022, International Conference on Applied Mathematics and Digital Simulation (2022)
Conference (Co-organisor)
2022/11/12 - 2022/11/14 President of the scientific committee of the international conference 6INYARC, 6th International New York Academic Research Congress (2022)
Conference (Other)
2015/06/15 - 2015/06/18 Organizer of special session "Natural fibre composites" in ICCS18, 18th International Conference on Composite Structures, Lisboa (Portugal), 15-18 Junho de 2015. (2015)
Conference (Other)
2013/07/01 - 2013/07/04 Organizer of special session "Adhesive Science and Technology" in ACE-X 2013, 7th International Conference on Advanced Computational Engineering and Experimenting (2013)
Conference (Other)
2013/06/17 - 2013/06/21 Organizer of special session "Natural fibre composites" in ICCS17, 17th International Conference on Composite Structures (2013)
Conference (Other)
2011/06/28 - 2011/06/30 Organizer of special session "Joints in composite structures" in ICCS16, 16th International Conference on Composite Structures (2011)
Conference (Other)

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2023/12/22 - 2023/12/24 Participation in international conference
Conference
 6AISRC, ASES VI International Scientific Research Conference
2023/12/09 - 2023/12/11 Participation in international conference
Conference
 15IICLEAS, 15th International Istanbul Scientific Research Congress on Life, Engineering, and Applied Sciences
2023/11/25 - 2023/11/27 Participation in international conference
Conference
 11ICLEAS, 11th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023/11/24 - 2023/11/26 Participation in international conference
Conference
 7IHESC, Ases VII International Health, Engineering and Science Congress
2023/11/16 - 2023/11/18 Participation in international conference
Conference
 GSEAME2023, 3rd Global Summit and Expo on Aerospace and Mechanical Engineering
2023/11/11 - 2023/11/13 Participation in international conference
Conference
 5IAchCLEAS, 5th International Acharaka Congress on Life, Engineering, and Applied Sciences
2023/10/28 - 2023/10/30 Participation in international conference
Conference
 10IBCLEAS, 10th International Baskent Congress on Life, Engineering, and Applied Sciences
2023/10/27 - 2023/10/30 Participation in international conference
Conference
 PCM2023, 10th Global Conference on Polymer and Composite Materials
2023/10/14 - 2023/10/16 Participation in international conference
Conference
 2IICLEAS, 2nd International Izmir Conference on Life, Engineering, and Applied Sciences
2023/10/04 - 2023/10/06 Participation in international conference
Conference
 IWPDF2023, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
2023/10/01 - 2023/10/03 Participation in international conference
Conference
 5IACLEAS, 5th International Artemis Congress on Life, Engineering and Applied Sciences
2023/09/15 - 2023/09/18 Participation in international conference
Conference
 4IAzCLEAS, 4th International Azerbaijan Congress on Life and Applied Sciences
2023/09/07 - 2023/09/08 Participation in international conference
Conference
 MD2023, International Conference on Machine Design
2023/08/26 - 2023/08/28 Participation in international conference
Conference
 14IISRCLEAS, 14th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences
2023/08/12 - 2023/08/14 Participation in international conference
Conference
 10ICLEAS, 10th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023/07/29 - 2023/07/31 Participation in international conference
Conference
 IICLEAS, International Izmir Congress on Life, Engineering, and Applied Sciences
2023/07/15 - 2023/07/18 Participation in international conference
Conference
 4IAchCLEAS, 4th International Acharaka Life, Social, and Health Sciences Congress
2023/07/13 - 2023/07/14 Participation in international conference
Conference
 AB2023, 7th International Conference on Structural Adhesive Bonding
2023/06/28 - 2023/06/30 Participation in international conference
Conference
 MESIC2023, Manufacturing Engineering Society International Conference
2023/06/24 - 2023/06/26 Participation in international conference
Conference
 8INYARC, 8th International New York Academic Research Congress on Life, Engineering and Applied Sciences
2023/06/18 - 2023/06/22 Participation in international conference
Conference
 FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023/06/19 - 2023/06/21 Participation in international conference
Conference
 ICMSN2023, International Conference on Materials Science and Nanoscience
2023/06/16 - 2023/06/18 Participation in international conference
Conference
 6IHESC, 6th International Health, Engineering and Science Congress
2023/06/03 - 2023/06/06 Participation in international conference
Conference
 4IACLEAS, 4th International Artemis Congress on Life, Engineering, and Applied Sciences
2023/05/22 - 2023/05/23 Participation in international conference
Conference
 ICQIS2023, 4th International Conference on Quality, Innovation and Sustainability
2023/05/20 - 2023/05/23 Participation in international conference
Conference
 9IBCLEAS, 9th International Baskent Congress on Life, Engineering, and Applied Sciences
2023/04/29 - 2023/04/30 Participation in international conference
Conference
 13IISRC, 13th International Istanbul Scientific Research Congress on Life, Engineering, and Applied Sciences
2023/04/08 - 2023/04/10 Participation in international conference
Conference
 9ICLEAS, 9th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023/03/25 - 2023/03/27 Participation in international conference
Conference
 3IArtCLEAS, 3rd International Artemis Congress on Life, Engineering, and Applied Sciences
2023/03/11 - 2023/03/13 Participation in international conference
Conference
 3IACLEAS, 3rd International Acharaka Congress on Life, Engineering, and Applied Sciences
2023/02/21 - 2023/02/24 Participation in international conference
Conference
 IGF27, 27th International Conference on Fracture and Structural Integrity
2023/02/18 - 2023/02/20 Participation in international conference
Conference
 7INYARC, 7th International New York Academic Research Congress on Life, Engineering, and Applied Sciences
2023/02/04 - 2023/02/06 Participation in international conference
Conference
 8IBCPEAS, 8th International Baskent Congress on Physical, Engineering, and Applied Sciences
2023/01/28 - 2023/01/29 Participation in international conference
Conference
 3ICSR, 3rd International Scientific Research Conference
2023/01/21 - 2023/01/21 Participation in international conference
Conference
 12IISRC, 12th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences
2023/01/07 - 2023/01/09 Participation in international conference
Conference
 8ICLSHSCW, 8th International Congress on Life, Social, and Health Sciences in a Changing World
2022/12/17 - 2022/12/19 Participation in international conference
Conference
 2IACLSHSS, 2nd International Artemis Congress on Life, Social, Health, and Sports Sciences
2022/12/17 - 2022/12/19 Participation in international conference
Conference
 IV-ICHES, ASES IV International Health, Engineering and Science Congress
2022/11/26 - 2022/11/28 Participation in international conference
Conference
 3IACLSHSS, 3rd International Azerbaijan Academic Research Congress on Life, Social, and Health Sciences
2022/11/18 - 2022/11/20 Participation in international conference
Conference
 AICAS2022, Ases International Congress of Applied Sciences
2022/11/12 - 2022/11/14 Participation in international conference
Conference
 6INYARC, 6th International New York Academic Research Congress
2022/10/29 - 2022/10/31 Participation in international conference
Conference
 7IBCPSHS, 7th International Baskent Congress on Physical, Social, and Health Sciences
2022/10/15 - 2022/10/17 Participation in international conference
Conference
 11IISRC, 11th International Istanbul Scientific Research Congress
2022/10/14 - 2022/10/16 Participation in international conference
Conference
 3ICHES, 3rd International Health, Engineering and Science Congress
2022/10/09 - 2022/10/11 Participation in international conference
Conference
 9ISRC, Cukorova 9th International Scientific Researches Conference
2022/09/24 - 2022/09/26 Participation in international conference
Conference
 7ICLSH2022, 7th International Congress on Life, Social, and Health Sciences in a Changing World
2022/09/20 - 2022/09/23 Participation in international conference
Conference
 ICSID 2022, 6th International Conference on Structural Integrity and Durability
2022/09/16 - 2022/09/19 Participation in international conference
Conference
 PCM2022, 9th Global Conference on Polymer and Composite Materials
2022/09/10 - 2022/09/12 Participation in international conference
Conference
 IACLSHSS2022, International Artemis Congress on Life, Social, Health, and Sports Sciences
2022/08/27 - 2022/08/28 Participation in international conference
Conference
 IBCPSHS2022, 6th International Baskent Congress on Physical, Social, and Health Sciences
2022/08/26 - 2022/08/27 Participation in international conference
Conference
 VI-IECISR2022, VI Internarional European Conference on Interdisciplinary Scientific Research
2022/08/13 - 2022/08/15 Participation in international conference
Conference
 12ISRC, International Scientific Research Congress-XII
2022/08/13 - 2022/08/14 Participation in international conference
Conference
 IACLSHAS2022, 2nd International Azerbaijan Congress on Life, Social, Health, and Art Sciences
2022/07/23 - 2022/07/25 Participation in international conference
Conference
 10IISRC, X International Istanbul Scientific Research Congress
2022/07/19 - 2022/07/22 Participation in international conference
Conference
 ICCS25, 25th International Conference on Composite Structures
2022/07/07 - 2022/07/08 Participation in international conference
Conference
 MDA 2022, 4th International Conference on Materials Design and Applications
2022/07/02 - 2022/07/03 Participation in international conference
Conference
 ICLSHSCW2022, 6th International Congress on Life, Social, and Health Sciences in a Changing World
2022/06/28 - 2022/06/30 Participation in international conference
Conference
 IKASRC2022, International Korkut Ata Scientific Researches Conference
2022/06/27 - 2022/06/29 Participation in international conference
Conference
 ICMA2SC2022, International Conference on Mathematical Analysis and Applications in Science and Engineering
2022/06/19 - 2022/06/23 Participation in international conference
Conference
 FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022/06/17 - 2022/06/19 Participation in international conference
Conference
 ICSRC2022, International Cappadocia Scientific Research Congress
2022/06/04 - 2022/06/06 Participation in international conference
Conference
 IMASRC2022, 8th International Mardin Artuklu Scientific Researches Conference
2022/05/28 - 2022/05/29 Participation in international conference
Conference
 IAARC2022, International Azerbaijan Academic Research Congress
2022/05/27 - 2022/05/29 Participation in international conference IACCS-VI, International Asian Congress on Contemporary Sciences-VI
2022/05/14 - 2022/05/15 Participation in international conference
Conference
 IISRC2022, 9th International Istanbul Scientific Research Congress
2022/05/10 - 2022/05/11 Participation in international conference
Conference
 IICMS2022, 1st International Congress on Modern Sciences
2022/05/07 - 2022/05/08 Participation in international conference
Conference
 ICHES2022, ASES International Health, Engineering and Sciences Congress
2022/05/06 - 2022/05/08 Participation in international conference
Conference
 IMSRC2022, International Modern Scientific Research Congress – III
2022/05/05 - 2022/05/06 Participation in international conference
Conference
 EM2022, 1st International Conference on Engineering Manufacture
2022/05/03 - 2022/05/04 Participation in international conference
Conference
 ICQIS2022, 3rd International Conference on Quality, Innovation and Sustainability
2022/04/15 - 2022/04/17 Participation in international conference ISRC2022, 8th International Scientific Researches Conference
2022/03/03 - 2022/03/04 Participation in international conference
Conference
2022/02/14 - 2022/02/16 Participation in international conference
Conference
 MedFract2, 2nd Mediterranean Conference on Fracture and Structural Integrity
2021/10/21 - 2021/10/22 Participation in international conference
Conference
 AJP2021, 2nd International Conference on Advanced Joining Processes
2021/09/09 - 2021/09/10 Participation in international conference
Conference
 MD2021, International Conference on Machine Design
2021/09/07 - 2021/09/10 Participation in international conference
Conference
 FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing
2021/08/30 - 2021/09/02 Participation in international conference
Conference
 ICSI2021, Virtual 4th International Conference on Structural Integrity
2021/07/08 - 2021/07/09 Participation in international conference
Conference
 AB2021, 6th International Conference on Structural Adhesive Bonding
2021/06/23 - 2021/06/25 Participation in international conference
Conference
 MESIC2021, Manufacturing Engineering Society International Conference
2021/05/26 - 2021/05/31 Participation in international conference IGF26, 26th International Conference on Fracture and Structural Integrity
2020/08/26 - 2020/08/27 Participation in international conference
Conference
 FFW2020, The 8th International Conference on Fracture, Fatigue and Wear
2020/06/29 - 2020/07/01 Participation in international conference
Conference
 VECF1, 1st Virtual European Conference on Fracture
2020/01/16 - 2020/01/16 Participation in international conference
Conference
 VCSI2020, First Virtual Conference on Structural Integrity
2019/04/30 - 2019/04/30 Participation in national conference V Jornadas do Mestrado de Engenharia Mecânica e Engenharia e Gestão Industrial
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 - 2019 Participation in international conference
Conference
 Materiais 2019, X International Materials Symposium | XIX Portuguese Materials Society Meeting
2019 - 2019 Participation in international conference
Conference
 MESIC2019, 8th Manufacturing Engineering Society International Conference
2019 - 2019 Participation in international conference
Conference
 FAIM2019, 29th International Conference on Flexible Automation and Intelligent Manufacturing
2019 - 2019 Participation in international conference
Conference
 AB2019, 5th International Conference on Structural Adhesive Bonding
2019 - 2019 Participation in international conference
Conference
 AJP2019, 1st International Conference on Advanced Joining Processes
2018/04/18 - 2018/04/18 Participation in national conference
Conference
 IV Jornadas do Mestrado de Engenharia Mecânica
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 - 2018 Participation in international conference
Conference
 FAIM2018, 28th International conference on Flexible automation and Intelligent Manufacturing
2018 - 2018 Participation in international conference
Conference
 HELIX2018, Regional Helix 2018 International Conference on Innovation, Engineering and Entrepeneurship
2018 - 2018 Participation in international conference
Conference
 TE2018, 25th International Conference on Transdisciplinary Engineering
2018 - 2018 Participation in international conference
Conference
 MDA2018, 2nd International Conference on Materials Design and Applications
2018 - 2018 Participation in international conference
Conference
 NT2F18, 18th International Conference on New Trends in Fatigue and Fracture
2018 - 2018 Participation in international conference
Conference
 IRF2018, 6th International Conference on Integrity, Reliability and Failure
2018 - 2018 Participation in international conference
Conference
 ICCS21, 21th International Conference on Composite Structures
2018 - 2018 Participation in international conference
Conference
 EURADH2018, 12th European Adhesion Conference and CLBA2018, 4th Luso-Brazilian Conference on Adhesion and Adhesives
2018 - 2018 Participation in international conference
Conference
 BS2018, 8th International Conference on Business Sustainability
2018 - 2018 Participation in national conference
Conference
 PCF2018, XVI Portuguese Conference on Fracture
2017/05/18 - 2017/05/18 Participation in national conference
Conference
 III Jornadas do Mestrado de Engenharia Mecânica
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 - 2017 Participation in international conference
Conference
 SYMCOMP2017, 3rd International Conference on Numerical and Symbolic Computation: Developments and applications
2017 - 2017 Participation in international conference
Conference
 Materiais 2017, IX International Materials Symposium | XVIII Portuguese Materials Society Meeting
2017 - 2017 Participation in international conference
Conference
 M2D 2017, 7th International Conference on Mechanics and Materials in Design
2017 - 2017 Participation in international conference
Conference
 MESIC2017, 7th Manufacturing Engineering Society International Conference
2017 - 2017 Participation in international conference
Conference
 AB2017, 4th International Conference on Structural Adhesive Bonding
2017 - 2017 Participation in international conference
Conference
 FFW2017, International Conference on Fracture Fatigue and Wear
2017 - 2017 Participation in international conference
Conference
 ICCS20, 20th International Conference on Composite Structures
2017 - 2017 Participation in international conference
Conference
 CIBEM2017, XIII Congresso Ibero-Americano de Engenharia Mecânica
2017 - 2017 Participation in international conference
Conference
 BS2017, 7th International Conference on Business Sustainability
2016/04/20 - 2016/04/20 Participation in national conference
Conference
 II Jornadas do Mestrado de Engenharia Mecânica
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 - 2016 Participation in international conference
Conference
 CLBA2016, 3ª Conferência Luso-Brasileira de Adesão e Adesivos
2016 - 2016 Participation in international conference
Conference
 CEM2016, Mechanical Engineering Conference
2016 - 2016 Participation in international conference
Conference
 MDA 2016, 1st International Conference on Materials Design and Applications
2016 - 2016 Participation in international conference
Conference
 IRF2016, 5th International Conference on Integrity, Reliability and Failure
2016 - 2016 Participation in international conference
Conference
 ICCS19, 19th International Conference on Composite Structures
2016 - 2016 Participation in international conference
Conference
 BS2016, 6th International Conference on Business Sustainability
2016 - 2016 Participation in national conference
Conference
 PCF 2016, XV Portuguese Conference on Fracture
2015/04/22 - 2015/04/22 Participation in national conference
Conference
 Workshop MEM Partners
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 - 2015 Participation in international conference
Conference
 ICCS18, 18th International Conference on Composite Structures
2015 - 2015 Participation in international conference
Conference
 Materiais 2015, VIII International Materials Symposium | XVII Portuguese Materials Society Meeting
2015 - 2015 Participation in international conference
Conference
 AB2015, 3rd International Conference on Structural Adhesive Bonding
2015 - 2015 Participation in international conference
Conference
 ICSI 2015, 1st International Conference on Structural Integrity
2014 - 2014 Participation in international conference
Conference
 ICEFA VI, 6th International Conference on Engineering Failure Analysis
2014 - 2014 Participation in international conference
Conference
 CLBA2014, 2ª Conferência Luso-Brasileira de Adesão e Adesivos
2014 - 2014 Participation in national conference
Conference
 PCF 2014, XIV Portuguese Conference on Fracture
2013 - 2013 Participation in international conference
Conference
 Materiais 2013, VII International Materials Symposium | XVI Portuguese Materials Society Meeting
2013 - 2013 Participation in international conference
Conference
 ICCS17, 17th International Conference on Composite Structures
2013 - 2013 Participation in international conference
Conference
 ACE-X 2013, 7th International Conference on Advanced Computational Engineering and Experimenting
2013 - 2013 Participation in international conference
Conference
 AB2013, 2nd International Conference on Structural Adhesive Bonding
2013 - 2013 Participation in international conference
Conference
 XIV Congreso de Adhesión y Adhesivos
2013 - 2013 Participation in national conference
Conference
 ENEGI2013, Encontro Nacional de Engenharia e Gestão Industrial
2012 - 2012 Participation in international conference
Conference
 YIC 2012, 1st European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference
2012 - 2012 Participation in international conference
Conference
 IJSI 2012, 1st International Conference of the International Journal of Structural Integrity
2012 - 2012 Participation in international conference
Conference
 ACE-X 2012, 6th International Conference on Advanced Computational Engineering and Experimenting
2012 - 2012 Participation in international conference
Conference
 ICEM15, 15th International Conference on Experimental Mechanics
2012 - 2012 Participation in international conference
Conference
 CLBA2012, Conferência Luso-Brasileira de Adesão e Adesivos
2012 - 2012 Participation in national conference
Conference
 PCF 2012, XIII Portuguese Conference on Fracture
2011 - 2011 Participation in international conference
Conference
 Materiais 2011, VI International Materials Symposium | XV Portuguese Materials Society Meeting
2011 - 2011 Participation in international conference
Conference
 BS2011, Second International Conference on Business Sustainability 2011
2011 - 2011 Participation in international conference
Conference
 ICCS16, 16th International Conference on Composite Structures
2011 - 2011 Participation in international conference
Conference
 ACE-X 2011, International Conference on Advanced Computational Engineering and Experimenting
2011 - 2011 Participation in international conference
Conference
 AB2011, International Conference on Structural Adhesive Bonding
2011 - 2011 Participation in international conference
Conference
 CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica
2011 - 2011 Participation in international conference
Conference
 CIBEM10, X Congresso Ibero-Americano em Engenharia Mecânica
2010 - 2010 Participation in international conference
Conference
 CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010
2010 - 2010 Participation in international conference
Conference
 ACE-X 2010, International Conference on Advanced Computational Engineering and Experimenting
2010 - 2010 Participation in national conference
Conference
 ENMEC2010, Encontro Nacional de Materiais e Estruturas Compósitas
2009 - 2009 Participation in international conference
Conference
 JLBE 2009, II Jornadas Luso-Brasileiras de Ensino e Tecnologia em Engenharia
2009 - 2009 Participation in international conference
Conference
 Materiais 2009, V International Materials Symposium | XIV Portuguese Materials Society Meeting
2009 - 2009 Participation in international conference
Conference
 ICCS15, 15th International Conference on Composite Structures
2009 - 2009 Participation in international conference
Conference
 ACE-X 2009, International Conference on Advanced Computational Engineering and Experimenting
2009 - 2009 Participation in international conference
Conference
 IRF2009, 3rd International Conference on Integrity, Reliability and Failure
2008 - 2008 Participation in international conference
Conference
 MOMENTUM | Multidisciplinary Research and Training in Composite Materials Applications in Transport Modes | repair and fire behaviour of composites
2008 - 2008 Participation in international conference
Conference
 ACE-X 2008, International Conference on Advanced Computational Engineering and Experimenting
2008 - 2008 Participation in international conference
Conference
 CLME’2008, 5º Congresso Luso-Moçambicano de Engenharia
2008 - 2008 Participation in national conference
Conference
 PCF 2008 - 11th Portuguese Conference on Fracture
2007 - 2007 Participation in international conference
Conference
 ACE-X 2007, International Conference on Advanced Computational Engineering and Experimenting
2005 - 2005 Participation in international conference
Conference
 Materiais 2005, III International Materials Symposium | XII Portuguese Materials Society Meeting
2004 - 2004 Participation in national conference
Conference
 4as Jornadas Politécnicas de Engenharia
2003 - 2003 Participation in national conference
Conference
 3as Jornadas Politécnicas de Engenharia

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2023 Otimização do sistema de fecho para embalagens metálicas
(Thesis) Arguer
 Manuel Pedro Seabra Girão (Master)
2023 Study of the influence of printing parameters on the residual stresses present in FDM printed parts
(Thesis) Arguer
 Amauri Joel Simão Couto (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2023 Estruturas contentorizadas para subestações móveis: caracterização mecânica por simulação numérica
(Thesis) Arguer
 Estruturas contentorizadas para subestações móveis: caracterização mecânica por simulação numérica (Master)
Universidade de Aveiro, Portugal
2023 Otimização topológica estrutural dos raios da roda do rover perseverance da NASA usando técnicas avançadas de discretização
President of the jury
 Jure Trdin (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2023 Combinação de métodos de discretização sem malha com otimização topológica estrutural na análise de problemas bidimensionais
President of the jury
 Rodrigo Miguel Martins Rajão (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2023 Science based targets - Fatores que contribuem para o desenvolvimento sustentável de uma organização
President of the jury
 Afonso Manuel Afonso Carvalho (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2023 Análise computacional para a avaliação da resistência ao fogo em elementos construtivos de suporte em aglomerado de madeira com proteção
President of the jury
 Domingos de Araújo Moreira Pereira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2023 Definição de uma estrutura tarifária para o produto de contratos de assistência
President of the jury
 Bárbara Osório Botelho (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 Sensorização e supervisão do processo de infusão por vácuo para o fabrico de materiais compósitos
(Thesis) Arguer
 Bruno Martins Guerreiro Maia (Master)
Universidade de Aveiro, Portugal
2022 Análise do estímulo mecânico em função do perfil de roscas e diâmetros de parafusos para implantes
President of the jury
 Mariana Filipa de Silva Leitão (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 Determinação do efeito da proteção em elementos construtivos de madeira submetidos à ação do fogo
President of the jury
 Cristofe Samorinha Fernandes (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 Análise térmica de perfis de alumínio protegidos e não protegidos sob ação do fogo
President of the jury
 Bruna Manuela Silva Costa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2022 Análise do processo de enrolamento de material calandrado
President of the jury
 Fábio André Saraiva Vilaça (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021/03/02 Otimização e controlo de uma linha de produção
(Thesis) Arguer
 João Abel Guillot Machado dos Santos (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2021 Teste e aperfeiçoamento de máquina de impressão 3D de metais
(Thesis) Arguer
 Luís Miguel Ferreira Costa (Master)
Universidade de Aveiro, Portugal
2021 Sistema sincronizado de elevação de oito pontos
President of the jury
 Tiago João Inácio Silva (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Os lubrificantes biodegradáveis e não biodegradáveis – O estado atual de desenvolvimento e estudo comparativo entre os dois tipos de lubrificantes
President of the jury
 Ana Sofia Neves da Silva Meira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Efeito do espessante e da viscosidade na lubrificação com massa
President of the jury
 Gonçalo Maia da Costa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Influência das condições de rodagem na fadiga de engrenagens
President of the jury
 Alexandre Quintal e Ferreira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Adaptação e validação experimental de banco de ensaios de rolamentos
President of the jury
 Ricardo Manuel Franco Ladislau Ferreira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Estudo experimental sobre a relação entre as propriedades físicas dos lubrificantes e o seu comportamento tribológico
President of the jury
 Fernando Moreira dos Santos Ascenção (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Gestão e projeto de estrutura metálica
President of the jury
 Bruna Raquel Rodrigues Sousa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Estudo de modelos de turbulência aplicados à ventilação de espaços interiores
President of the jury
 Célia Patrícia Dias de Almeida (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 Desenvolvimento de um sistema de reaproveitamento do calor rejeitado por uma máquina térmica
President of the jury
 João Pedro Cruz Peixoto (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021 The three pilars of sustaintability and agile project management: how do they influence each other
President of the jury
 Maria Carolina Conceição Cancela Nogueira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Structural optimization combined with meshless methods – 2D applications
President of the jury
 Diogo Costa Gonçalves (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Otimização estrutural recorrendo a métodos sem malha: análise de estruturas planas
President of the jury
 Joel Domingos Fontes Lopes (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Resistência ao fogo de ligações aço-madeira-aço (S-W-S)
President of the jury
 Vânia Sofia Bexiga da Silva (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Avaliação experimental dos efeitos da furação em laminados carbono epóxi com empilhamento cruzado (cross-ply)
President of the jury
 Luís Filipe da Silva Devesa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Comportamento de laminados reforçados com fibras e resíduos após furação
President of the jury
 João Gomes Alves (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Otimização do primeiro estágio de redução de uma caixa redutora industrial
President of the jury
 Ivo Daniel Moreira Ramos (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Desenvolvimento e caracterização de um material compósito termomoldável e sustentável
President of the jury
 Jorge Filipe Soares Teixeira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Otimização da climatização de uma unidade industrial
President of the jury
 Pedro Nuno Pinto Ferreira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Implementação TPM – Total productive maintenance
President of the jury
 Daniel Francisco Martinho Dias Pimentel (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Estudo da influência da gaiola no atrito de rolamentos
President of the jury
 Ana Francisca Pereira Regalo (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 Melhoria da gestão da manutenção preventiva numa empresa de cartão canelado
President of the jury
 João Miguel Carvalho Azevedo (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Criação de valor para as organizações: simulação de tempos até à falha de ativos tangíveis
President of the jury
 João Filipe Vieira Gomes (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Mapeamento e caraterização dos fluxos afluentes à etari para posterior melhoria de processo e infraestruturas
President of the jury
 Amélia Serra Pinho (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Análise de viabilidade da utilização de coletores solares na Europa
President of the jury
 Sílvia Araújo de Oliveira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Ligações (W-W-W) madeira-madeira em corte duplo, à temperatura ambiente e a elevadas temperaturas
President of the jury
 Pedro António da Silva Leite (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Modelo de análise de indicadores de desempenho para a melhoria continua
President of the jury
 Pedro Miguel Reitor Dias (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Criação de modelos de custeio e melhoria da produtividade, na indústria de ferramentas de corte e estampagam
President of the jury
 João Carlos da Silva (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Proposta de modelo de avaliação de fornecedores
President of the jury
 António Alexandre Vasconcelos Arriscado Gonçalves (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Estudo do ciclo de vida de um disjuntor de média tensão em diferentes realidades culturais
President of the jury
 José Miguel Lima Paixão Martins de Carvalho (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Wood-steel connections (W-S-W) in double shear at room and high temperatures
President of the jury
 Lino Daniel Soares Silva (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Análise do mercado de veículos elétricos e propostas para o melhorar
President of the jury
 José Carlos Ferreira Santos (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Determinação dos parâmetros ótimos na operação de acabalmento superficial do alumínio EN AW-6082
President of the jury
 Vitor Manuel da Costa Ribeiro (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Otimização de processos produtivos de extrusão
President of the jury
 José Miguel Moreira Carvalho (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Projeto de um viscosímetro de alta pressão
President of the jury
 Mário André Gomes Cerqueira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2019 Conceção de linha automática de revestimentos poliméricos
(Thesis) Arguer
 Estela Maria Fernandes Martins Bento (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 Development of a patient-specific device to guide and assist the knee arthroscopy
(Thesis) Arguer
 Nuno Filipe Vieira Gonçalves (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 Reinforcement of CFRP SLJs using metal laminates and adhesive layers
(Thesis) Arguer
 Mário António Morgado dos Santos Pereira (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 Development of a process to obtain a graded distribution of particles along the overlap of adhesive single lap joints
(Thesis) Arguer
 Catarina Isabel Seixas da Silva (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 Exploring new crack opening path approaches using meshless methods
(Thesis) Arguer
 Vítor Manuel Mota da Cunha (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 Modelos de elementos finitos para cálculo estrutural em código aberto
(Thesis) Arguer
 Luís Miguel Cardoso Seixas (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 Verificação numérica e experimental de estrutura autoportante para elevadores do tipo homelift
President of the jury
 Emmanuel Mendes Petejo (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Restrições de garras manipuladoras dentro do problema de empacotamento de paletes do produtor uma abordagem heurística
President of the jury
 João Pedro Woitchy Barbosa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Gestão de recursos finitos em empresas
President of the jury
 Heric Mantovani (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Melhoria do sistema de fluxo logístico interno pull flow: físico e digital. Gestão de recursos finitos em empresas
President of the jury
 Tais Tellini (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Melhoria contínua e desenvolvimento de KPI'S na indústria de cablagens metálicas
President of the jury
 João Manuel Correia Lopes Pereira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Manutenção em ambiente hospitalar
President of the jury
 João Miguel Loureiro Ribeiro (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Análise e melhoria de processos de manutenção preventiva na indústria de lacticínios
President of the jury
 Sérgio André Nunes Rodrigues Santos Ferreira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Otimização de sistemas de lubrificação de cabos
President of the jury
 Ricardo Jorge Costa Ribeiro (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Estudo da Soldabilidade do Ferro Fundido Sibodur 450
President of the jury
 Eva Soledade Vaz Marques (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Eco-design in the portuguese packaging industry
President of the jury
 João Pedro Campos Monteiro (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018 Impact strength of dissimilar joints for the automotive industry
(Thesis) Arguer
 Paulo David Pereira Nunes (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 Predicting in-silico structural response of dental restorations
(Thesis) Arguer
 Gabriela Afonso Ribeiro Caldas (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 Optimization of CFRP joints with fibre metal laminates
(Thesis) Arguer
 Daniel Gomes dos Santos (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 Mecânica da fratura em modo misto: Modelação numérica e validação experimental
(Thesis) Arguer
 Sérgio Alexandre Gonçalves Pereira (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2017 Sistema autónomo de monitorização subaquática com variação de flutuabilidade para o projeto MARINEYE
President of the jury
 Marco Mota Gonçalves (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 Produção de pré-impregnados de matriz termoplástica e fibras de carbono: Transformação por pultrusão e compressão a quente
President of the jury
 Puria Esfandiari (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 Análise e melhoria de processos na empresa Flamingo S.A.
President of the jury
 Hugo Tiago Martins da Rocha (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 Projeto de um tribómetro do tipo pino-disco
President of the jury
 João Paulo Paiva Martins (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 Estudo de uma suspensão num UTV
President of the jury
 Miguel Ferreira Araújo (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 Design e otimização de peças estruturais metálicas para processos de fabricação aditiva
President of the jury
 José Armando Arantes Carreira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017 Improvements in the impact strength of composite joints for the automotive industry
(Thesis) Arguer
 Pablo Martinez-Romero Gamarra (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2017 Mixed mode crack propagation: Numerical and experimental study
(Thesis) Arguer
 Marco André Carvalho Ferreira (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 Kitchen robot prod. line development. Proj. of Bowden cables cutting and termal forming machine
President of the jury
 Jakub Radwanski (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Projeto de equipamento flexível para montagem de conjuntos para limpa para-brisas de automóvel
President of the jury
 Ricardo Jorge Soares da Costa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Sistema inovador de transferência de paletes
President of the jury
 Fábio Rúben Carvalho Pimenta (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Antecipação de problemas e redução de custos na estampagem de aços dual-phase de altíssima resistência
President of the jury
 Tiago Dias Gomes (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Projeto de molde sandwich para a injeção de duas peças para a indústria automóvel
President of the jury
 Vitor Abel Marques Pais (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Análise e otimização de máquinas para o fabrico de espiral metálica para cabos
President of the jury
 João Mário Monteiro Quadrado (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Caracterização de materiais para hélices de motoventiladores
President of the jury
 António Miguel Gonçalves Leal (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Ligação soldada de compósitos de fibra de vidro e polipropileno
President of the jury
 Rafael Alexandre Nunes de Sousa (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Otimização do corte de bobines de aço
President of the jury
 Pedro Miguel Teixeira Ferreira (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 The use of solar colletor for heating and electricity for a single family house
(Thesis) Arguer
 Monika Zurawska (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Optimization and improvement of NSCU 1.0. Universal Functional Tester produced by Evoleo Technologi
(Thesis) Arguer
 Sandra Ludczak (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Machine for visual inspection
(Thesis) Arguer
 Adrianna Grzybowska (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 Tire inspection spreading machine
(Thesis) Arguer
 Pawel Penno (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2016 The numerical analysis of airplane windshields due to bird strike: A static study
(Thesis) Arguer
 João Pedro Monteiro Cabral de Noronha (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 The influence of water on the fracture envelope of an adhesive joint
(Thesis) Arguer
 Pedro Nuno Martins Fernandes (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2015 Estudo de problemas de corrosão em cabos de aço zincado
President of the jury
 Felismino de Brito Viana (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015 Optimization of CFRP joints with fibre metal laminates
(Thesis) Arguer
 Radu-Cristian Dumbrava (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2015 Multi-material adhesive joints for automotive industry
(Thesis) Arguer
 Mircea Ro¿ioara (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2014 Impact in adhesive joints for the automotive industry at low and high temperatures
(Thesis) Arguer
 Rodrigo Avendaño Mata (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2013 Testing and simulation of mixed adhesive joints for aerospace applications
(Thesis) Arguer
 Matteo Flaviani (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2012 Supressão/Requalificação das passagens de nível na via férrea portuguesa – o caso da linha do Douro
President of the jury
 Cristina Luísa Monteiro (Master)
Universidade Lusófona do Porto, Portugal
2012 Avaliação do desempenho de ligações tubulares em estruturas de veículos pesados de passageiros por simulação numérica
(Thesis) Arguer
 Sandro Duarte da Rocha Rodrigues (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Association member

Society Organization name Role
2022/01/01 - Current ESIS – European Structural Integrity Society Member
2012/01/01 - Current APAA – Associação Portuguesa de Adesão e Adesivos (Portuguese Adhesion and Adhesives Association) Member

Committee member

Activity description
Role 		Institution / Organization
2023/04/01 - Current Member of the editorial board of the scientific journal International Journal of Architecture and Engineering, published by ASES
2023/03/01 - Current Member of the editorial board of the scientific journal Journal of Machine Design and Automation Intelligence, published by De Gruyter De Gruyter Saur, Germany
2022/10/01 - Current Member of the editorial board of the scientific journal International Journal of Pioneering Technology and Engineering
2022/07/01 - Current Member of the editorial board of the scientific journal Journal of Composites and Biodegradable Polymers, published by Savvy Science Publisher
2022/06/01 - Current Member of the editorial board of the scientific journal Journal of Research Update in Polymer Science, published by LifeScience Global Lifescience Global, Canada
2022/03/01 - Current Member of the editorial board of the scientific journal Materials, published by MDPI MDPI AG, Switzerland
2022/03/01 - Current Member of the editorial board of the scientific journal Materials (Materials Simulation and Design section), published by MDPI MDPI AG, Switzerland
2022/01/01 - Current Member of the editorial board of the scientific journal Machines, published by MDPI
Member
 MDPI AG, Switzerland
2021/06/01 - Current Member of the editorial board of the scientific journal Processes, published by MDPI
Member
 MDPI AG, Switzerland
2018 - Current Member of the editorial board of the scientific journal The Journal of Adhesion by Taylor & Francis
Member
 Taylor & Francis Group, United Kingdom
2018 - Current Member of the editorial board of the scientific journal Journal of Adhesion Science and Technology by Taylor & Francis
Member
 Taylor & Francis Group, United Kingdom
2013 - Current Member of the editorial board of the scientific journal ISRN Construction Engineering from Hindawi Publishing Corporation since early 2013. In January 2014 the journal changed its name to International Scholarly Research Notices. Hindawi Publishing Corp, Egypt
2016/01/01 - 2018/12/31 Associate Editor da revista científica Journal of Applied and Computational Mechanics
Member
 Shahid Chamran University of Ahvaz, Iran

Conference scientific committee

Conference name Conference host
2024/11/05 - 2024/11/07 SMSE2024, The 3rd World Symposium on Materials Sciences and Engineering
2024/10/26 - 2024/10/27 ICCEAD2024, International Conference on Civil Engineering and Architectural Design
2024/03/10 - 2024/03/12 12ICSRC, Cukurova 12th International Scientific Researches Conference
2024 - 2024 CRM2024, 2nd Congress on Control, Robotics, and Mechatronics
2024 - 2024 MIC2024, 5th International Conference on Materials Science, Engineering & Technology
2024 - 2024 INDUSTRIALMEET2024, International Meet on Industrial and Manufacturing Engineering
2024 - 2024 ICAIT2024, 2024 International Conference on Automation and Intelligent Technology
2024 - 2024 EIIE2024, International Conference on Electronics, Information and Industrial Engineering
2024 - 2024 CM2024, International Conference on Composite and Ceramic Materials
2024 - 2024 ICRAIE2024, International Conference on Robotics and Artificial Intelligence Engineering
2024 - 2024 ICMME2024, International Conference on Mechanical and Mechatronics Engineering
2024 - 2024 ISIME2024, International Summit on Industrial and Manufacturing Engineering
2024 - 2024 GAMSE2024, 2nd Global Summit on Advanced Materials and Sustainable Energy
2024 - 2024 ICMSSM2024, The 9th International Conference on Mechanical Structures and Smart Materials
2024 - 2024 ICQIS2024, 5th International Conference on Quality, Innovation and Sustainability
2024 - 2024 IECMA2024, The 2nd International Electronic Conference on machines and Applications
2024 - 2024 ICMASC2024, International Conference on Mathematical Analysis and Applications in Science and Engineering
2024 - 2024 ROBOTMEET2024, 3rd International Meet & Expo on Robotics, Artificial Intelligence and its Applications
2024 - 2024 AMSE2024, The 5th International Congress on Advanced Materials Sciences and Engineering
2024 - 2024 MMSE2024, 10th International Conference on Advances in Machinery, Materials Science and Engineering Applications
2024 - 2024 MSAM2024, 7th International Conference on Material Strength and Applied Mechanics
2024 - 2024 GMAERO2024, 2nd Global Meet on Aerospace and Aeronautical Engineering
2024 - 2024 NME2024, 7th International Conference on Numerical Modelling in Engineering
2024 - 2024 FFW2024, 12th International Conference on Fracture, Fatigue and Wear
2024 - 2024 ICCS27, 26th International Conference on Composite Structures
2024 - 2024 ISONAET2024, 1st International Summit on Applied Science, Engineering and Technology
2024 - 2024 GSPSCM2024, Global Summit on Polymer Science and Composite Materials
2024 - 2024 ICAEAI 2024, International Conference on Automation Engineering and Artificial Intelligence
2024 - 2024 MatSci2024, 3rd International Conference on Materials Science & Engineering
2024 - 2024 GMMATERIALS2024, Global Meet on Materials Science and Nanomaterials
2024 - 2024 WSECEI2024, World Summit and Expo on Civil Engineering and Infrastructure
2024 - 2024 CCSD2024, International Conference on Climate Change and Sustainable Development
2024 - 2024 MAEM2024, The 3rd International Conference on Mechanical Automation and Engineering Materials
2024 - 2024 PCE2024, International Conference on Power and Clean Energy
2023 - 2023 MMPES2023, International Conference on Applied Mechanics, Materials Physics, and Engineering Structures
2023 - 2023 8ICLSHSCW, 8th International Congress on Life, Social, and Health Sciences in a Changing World
2023 - 2023 12IISRC, 12th International Istanbul Scientific Research Congress on Life, Engineering and Applied Sciences
2023 - 2023 3ICSR, III International Congress of Scientific Research
2023 - 2023 8IBCPEAS, 8th International Baskent Congress on Physical, Engineering and Applied Sciences
2023 - 2023 MAT2023, 4th International Conference on Materials Science And Engineering
2023 - 2023 CRM2023, Congress on Control, Robotics, and Mechatronics
2023 - 2023 3IArtCLEAS, 3rd International Artemis Congress on Life, Engineering, and Applied Sciences
2023 - 2023 9ICLEAS, 9th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023 - 2023 MACA2023, International Conference on Mechanical Automation and Computer Application
2023 - 2023 ICMAME2023, International Conference on Mechanical, Automotive and Mechatronics Engineering
2023 - 2023 IEEC2023, International Ecology and Environment Congress
2023 - 2023 ICAMME 2023, 17th International Conference on Advanced Materials and Materials Engineering
2023 - 2023 9IBCLEAS, 9th International Baskent Congress on Life, Engineering, and Applied Sciences
2023 - 2023 ICQIS2023, 4th International Conference on Quality, Innovation and Sustainability
2023 - 2023 4IACLEAS, 4th International Artemis Congress on Life, Engineering, and Applied Sciences
2023 - 2023 2IECITE, 2nd International Ege Congress on Innovation Technologies and Engineering
2023 - 2023 6IHESC, 6th International Health, Engineering and Science Congress
2023 - 2023 FAIM2023, 32nd International Conference on Flexible Automation and Intelligent Manufacturing
2023 - 2023 ICMSN2023, International Conference on Materials Science and Nanoscience
2023 - 2023 8ICSR, 8th International Congress on Scientific Research
2023 - 2023 ACSE2023, International Conference on Advances in Computer Science and Engineering Technology
2023 - 2023 MECHCOMP8, 8th International Conference on Mechanics of Composites
2023 - 2023 ICCS26, 26th International Conference on Composite Structures
2023 - 2023 MESIC2023, Manufacturing Engineering Society International Conference
2023 - 2023 MSAM2023, 6th International Conference on Material Strength and Applied Mechanics
2023 - 2023 AB2023, 7th International Conference on Structural Adhesive Bonding
2023 - 2023 4IAchCLEAS, 4th International Acharaka Life, Social, and Health Sciences Congress
2023 - 2023 CMME2023, International Conference on Computational and Mathematical Methods in Engineering
2023 - 2023 ISSDA2023, The International Symposium on Structural Dynamics of Aerospace
2023 - 2023 MMSE2023, 9th International Conference on Advances in Machinery, Materials Science and Engineering Applications
2023 - 2023 5ISRC, 5th International Scientific Research Conference
2023 - 2023 10ICLEAS, 10th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023 - 2023 AMMSA2023, 3rd International Conference on Applied Mathematics, Modelling and Statistics Application
2023 - 2023 NME2023, 6th International Conference on Numerical Modelling in Engineering
2023 - 2023 FFW2023, 11th International Conference on Fracture, Fatigue and Wear
2023 - 2023 MD2023, International Conference on Machine Design
2023 - 2023 ICMEBM2023, International Conference on Mechatronics Engineering and Building Modeling
2023 - 2023 NANOMAT2023, International Conference on Nanotechnology & Materials Science
2023 - 2023 HCET2023, 8th International Technical Conference on Frontiers of Hydraulic and Civil Engineering Technology
2023 - 2023 IWPDF2023, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
2023 - 2023 APMAS2023, 13th International Advances in Applied Physics & Materials Science Congress & Exhibition
2023 - 2023 HEREM2023, 9th International Symposium on Hydrogen, Renewable Energy and Materials
2023 - 2023 2IICLEAS, 2nd International Izmir Conference on Life, Engineering, and Applied Sciences
2023 - 2023 PSCM2023, Global Meet on Polymer Science and Composite Materials
2023 - 2023 AIBSSC2023, Ases International Bandirma Scientific Studies Conference
2023 - 2023 PCM2023, 10th Global Conference on Polymer and Composite Materials
2023 - 2023 ICMEMSCE2023, 10th International Conference on Mechanical Engineering, Materials Science and Civil Engineering
2023 - 2023 ICMEM2023, 4th International Conference on Mechanical Engineering and Materials
2023 - 2023 AIAMMS2023, 1st International Conference on Artificial Intelligence, Advanced Materials, and Mechatronics Systems
2023 - 2023 AIAMMS2023, 1st International Conference on Artificial Intelligence, Advanced Materials, and Mechatronics Systems
2023 - 2023 MatSci2023, 2nd International Conference on Materials Science & Engineering
2023 - 2023 5IAchCLEAS, 5th International Acharaka Congress on Life, Engineering, and Applied Sciences
2023 - 2023 4WCAMNN, 4th World Congress on Advanced Materials, Nanoscience and Nanotechnology
2023 - 2023 CILAMCE2023, The XLIV Ibero-Latin American Congress on Computational Methods in Engineering
2023 - 2023 AAIA 2023, International Conference on Advances in Artificial Intelligence and Applications
2023 - 2023 ISM2023, International Conference on Industry 4.0 and Smart Manufacturing
2023 - 2023 7IHESC, Ases VII International Health, Engineering and Science Congress
2023 - 2023 11ICLEAS, 11th International Congress on Life, Engineering, and Applied Sciences in a Changing World
2023 - 2023 CSCT2023, Congress on Smart Computing Technologies
2023 - 2023 CSEA2023, 9th International Conference on Computer Science, Engineering and Applications
2023 - 2023 ICCIS2023, 5th International Conference on Communication and Intelligent Systems
2023 - 2023 AMICS2023, The 2nd International Conference on Applied Mathematics, Informatics and Computing Sciences
2023 - 2023 6AISRC, 6th Ases International Scientific Research Congress
2023 - 2023 AMDS2023, International Conference on Applied Mathematics and Digital Simulation
2022/06/19 - 2022/06/23 FAIM2022, 31th International Conference on Flexible Automation and Intelligent Manufacturing
2022/05/03 - 2022/05/04 ICQIS2022, 3rd International Conference on Quality, Innovation and Sustainability
2022 - 2022 AMDS2022, International Conference on Applied Mathematics and Digital Simulation
2022 - 2022 ICMA2SC2022, International Conference on Mathematical Analysis and Applications in Science and Engineering
2022 - 2022 ICCS25, 25th International Conference on Composite Structures
2022 - 2022 PCM2022, 9th Global Conference on Polymer and Composite Materials
2022 - 2022 9ISRC, Cukorova 9th International Scientific Researches Conference
2022 - 2022 HEREM2022, 8th International Symposium on Hydrogen, Renewable Energy and Materials
2022 - 2022 3ICHES, 3rd International Health, Engineering and Science Congress
2022 - 2022 ICWT2022, International Conference on Welding Technology
2022 - 2022 6INYARC, 6th International New York Academic Research Congress
2022 - 2022 AICAS2022, Ases International Congress of Applied Sciences
2022 - 2022 3IACLSHSS, 3rd International Azerbaijan Academic Research Congress on Life, Social, and Health Sciences
2022 - 2022 AMICS2022, International Conference on Applied Mathematics, Informatics and Computing Sciences
2022 - 2022 IV-ICHES, ASES IV International Health, Engineering and Science Congress
2022 - 2022 2IACLSHSS, 2nd International Artemis Congress on Life, Social, Health, and Sports Sciences
2021/09/07 - 2021/09/10 FAIM2021, 30th International Conference on Flexible Automation and Intelligent Manufacturing
2021/07/08 - 2021/07/09 AB2021, 6th International Conference on Structural Adhesive Bonding
2021 - 2021 ICCS24, 24th International Conference on Composite Structures
2020 - 2020 ICCS23, 23th International Conference on Composite Structures
2020 - 2020 MECHCOMP6, 6th International Conference on Mechanics of Composites
2019 - 2019 AB2019, 5th International Conference on Structural Adhesive Bonding
2019 - 2019 ICCS22, 22th International Conference on Composite Structures
2018 - 2018 PCF2018, XVI Portuguese Conference on Fracture
2018 - 2018 ICCS21, 21th International Conference on Composite Structures
2017 - 2017 AB2017, 4th International Conference on Structural Adhesive Bonding
2017 - 2017 ICCS20, 20th International Conference on Composite Structures
2016 - 2016 PCF 2016, XV Portuguese Conference on Fracture
2016 - 2016 ICCS19, 19th International Conference on Composite Structures
2015 - 2015 ICCS18, 18th International Conference on Composite Structures
2015 - 2015 CACMS 2015, International Conference on Advances in Composite Materials and Structures
2014 - 2014 ACE-X 2014, 8th International Conference on Advanced Computational Engineering and Experimenting
2014 - 2014 PCF 2014, XIV Portuguese Conference on Fracture
2013 - 2013 ACE-X 2013, 7th International Conference on Advanced Computational Engineering and Experimenting
2012 - 2012 LIC'12, Lusófona International Congress
2011 - 2011 AB2011, International Conference on Structural Adhesive Bonding

Journal scientific committee

Journal title (ISSN) Publisher
2020 - Current Proceedings of the iMeche Part G: Journal of Aerospace Engineering SAGE Publications
2020 - Current The International Journal of Advanced Manufacturing Technology Springer-Verlag
2019 - Current Procedia CIRP (2212-8271) Elsevier
2019 - Current Part E: Journal of Process Mechanical Engineering SAGE Publications
2019 - Current Procedia Manufacturing (2351-9789) Elsevier
2019 - Current Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Springer-Verlag
2019 - Current Materials MDPI
2018 - Current Advances in Mechanical Engineering (1687-8140) SAGE Publications
2017 - Current International Journal of Mechanical Sciences (0020-7403) Elsevier
2017 - Current International Journal of Fracture (1573-2673) Springer-Verlag
2016 - Current International Scholarly Research Notices (2356-7872) Hindawi Limited
2016 - Current The Journal of Strain Analysis for Engineering Design (2041-3130) SAGE Publications
2016 - Current Journal of Materials: Design and Applicartions Part L SAGE Publications
2016 - Current Fatigue & Fracture of Engineering Materials & Structures (1460-2695) Wiley (Blackwell Publishing)
2016 - Current Theoretical and Applied Fracture Mechanics (0167-8442) Elsevier
2014 - Current Journal of Research Updates in Polymer Science (1929-5995) Lifescience Global
2014 - Current Central European Journal of Engineering (2081-9927) De Gruyter Open Sp. z o.o.
2014 - Current Fracture and Structural Integrity Italian Group Fracture
2014 - Current International Journal of Solids and Structures (0020-7683) Elsevier
2014 - Current Experimental Mechanics (1741-2765) Springer-Verlag
2013 - Current Composites Part A Applied Science and Manufacturing (1359-835X) Elsevier
2013 - Current Composites Part B Engineering (1359-8368) Elsevier
2013 - Current Journal of Composite Materials (1530-793X) SAGE Publications
2013 - Current Assembly Automation (0144-5154) Emerald (MCB UP )
2013 - Current Materials & Design (0264-1275) Elsevier
2013 - Current Applied Adhesion Science (2196-4351) Springer (Biomed Central Ltd.)
2013 - Current Journal of Reinforced Plastics and Composites (1530-7964) SAGE Publications
2012 - Current Engineering Fracture Mechanics (0013-7944) Elsevier
2012 - Current Journal of Engineering Materials and Technology (1528-8889) ASME International
2012 - Current Aerospace Science and Technology (1270-9638) Elsevier
2012 - Current Wind Energy (1099-1824) Wiley (John Wiley & Sons)
2011 - Current Engineering Failure Analysis (1350-6307) Elsevier
2011 - Current International Journal of Structural Integrity (1757-9864) Emerald (MCB UP )
2010 - Current Computational Materials Science (0927-0256) Elsevier
2009 - Current Composite Structures (0263-8223) Elsevier
2009 - Current The Journal of Adhesion (1545-5823) Informa UK (Taylor & Francis)
2009 - Current Construction and Building Materials (0950-0618) Elsevier
2009 - Current Surface and Coatings Technology (0257-8972) Elsevier
2009 - Current International Journal of the Physical Sciences (1992-1950) Academic Journals
2009 - Current Mechanics of Advanced Materials and Structures (1537-6494) Informa UK (Taylor & Francis)
2008 - Current International Journal of Adhesion and Adhesives (0143-7496) Elsevier
2007 - Current Journal of Adhesion Science and Technology (1568-5616) Informa UK (Taylor & Francis)

Other jury / evaluation

Activity description Institution / Organization
2023 - 2023 Member of the selection panel for a master's research grant under the project "DRIVOLUTION - Transition to the Factory of the Future", with the reference DRIVOLUTION/BM/01/2023, in January 2023. Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2023 - 2023 Member of the selection panel for a master's research grant under the project "DRIVOLUTION - Transition to the Factory of the Future", with the reference DRIVOLUTION/BM/02/2023, in June 2023. Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2020 - 2020 Member of the selection panel for a master's research grant under the POCI-01-0145-FEDER-028351 project "Development of constitutive models and tools for the static and dynamic design of structural adhesive connections (ProjLigEst)", in March 2020. RH FCT reference 028351 UPAL 28_2020. Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2020 - 2020 Member of the selection panel for a master's research grant under the POCI-01-0145-FEDER-028351 project "Development of constitutive models and tools for the static and dynamic design of structural adhesive connections (ProjLigEst)", in November 2020. RH FCT reference 028351 UCVE 06_20. Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2018 - 2018 Member of the selection panel for a master's research grant under the POCI-01-0145-FEDER-028351 project "Development of constitutive models and tools for the static and dynamic design of structural adhesive bonds (ProjLigEst)", in August 2018. Reference RH FCT 028351 UCVE 91_18. Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2018 - 2018 Member of the selection panel for a research grant for an assistant doctoral researcher under project POCI-01-0145-FEDER-028351 "Development of constitutive models and tools for the static and dynamic design of structural adhesive bonds (ProjLigEst)", in October 2018. Reference CT UCVE 32_18. Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
Distinctions

Award

2017 Outstanding Article Award
ASTM International, United States
2016 Certificate of Merit for Scientific Publication (4 papers)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014 Certificate of Merit for Scientific Publication
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2012 Research Award 2011-2012
Universidade Lusófona do Porto, Portugal
2010 Diploma of best teacher of the Degree in Industrial Management and Engineering
Universidade Lusófona do Porto, Portugal
2008 Best Oral Presentation
2002 Merit Scholarship
Instituto Politécnico do Porto, Portugal
2001 Best Bachelor's Student in 2000/2001 - AIMMAP
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2001 Best Bachelor's Student in 2000/2001 - MONTEP
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2001 Best student at ISEP in 2000/2001 - Rotary Club of Porto
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Other distinction

2023 Inclusion, in 2023, in the AD Scientific Index world ranking, with the following distinctions: H index in 5th place at IPP, 67th place in Portugal, 19082nd place in Europe and 55031st place in the world; 2nd place in Engineering at IPP
2023 Certificate of Merit for Scientific Publication awarded by the Polytechnic Institute of Porto in 2023, for the publication of two articles in the top 10% of scientific journals in their field.
2023 Inclusion, in 2022, in the 5th edition of Stanford University's list of the 2% most cited scientists worldwide: career impact category, in 116036th place.
2023 Inclusion, in the year 2022, in the 5th edition of the list of the 2% most cited scientists worldwide by Stanford University: single year category 2022, in 39316th place.
2022 Inclusion, in 2022, in the 2nd edition of the list of top scientists by the global platform Research.com: 8255th place worldwide and 44th place nationally (in the area of Materials Science), and 2277th place worldwide and 13th place nationally
2021 Inclusion, in 2021, in the 1st edition of the list of top scientists by the global platform Research.com: 5304th place worldwide and 19th place nationally (in the Materials Science area), and 2277th place worldwide and 13th place nationally
2021 Inclusion, in 2021, in the 4th edition of Stanford University's list of the 2% most cited scientists worldwide: career impact category, in 135201st place.
2021 Inclusion, in the year 2021, in the 4th edition of the list of the 2% most cited scientists worldwide by Stanford University: single year category 2021, in 40855th place.
2020 Inclusion, in 2020, in the 3rd edition of the list of the 2% of scientists most cited worldwide by Stanford University: career impact category, in 145355th place
Stanford University, United States
2020 Inclusion, in the year 2020, in the 3rd edition of the list of the 2% of scientists most cited worldwide by Stanford University: single year 2020 category, in 29978th place
Stanford University, United States
2019 Inclusion, in 2019, in the 2nd edition of the list of the 2% of scientists most cited worldwide by Stanford University: career impact category, in 194106th place
Stanford University, United States
2019 Inclusion, in the year 2019, in the 2nd edition of the list of the 2% of scientists most cited worldwide by Stanford University: category single year 2019, in 35546th place
Stanford University, United States
2017 Inclusion, in the year 2017, in the 1st edition of the list of the 2% of scientists most cited worldwide by Stanford University: category single year 2017, in the 119505th place
Stanford University, United States
2011 Inclusion of the biography in the 28th edition of the Marquis Who¿s Who Biographies List Who¿s Who in the World 2011
Marquis Who's Who LLC, United States